publication venue for
- A Review of Oil Palm Fruit Ripeness Monitoring Using Microwave Techniques in Malaysia. 767:012007. 2020
- A review of ultra-high temperature materials for thermal protection system. 863:012003. 2020
- Air co-gasification of palm kernel shell and polystyrene: Effect of different polystyrene content. 863:012023. 2020
- An Investigation on The Effect of Silica Nanoparticle Concentration on Oil-based Mud Rheology and Fluid Loss Control Characteristic. 778:012118. 2020
- An investigation of thermal stability and heat capacity of imidazolium based ionic liquids at elevated temperature. 863:012026. 2020
- Anaerobic co-digestion for oily-biological sludge with sugarcane bagasse for biogas production under mesophilic condition. 991:012084. 2020
- Assessment of patterned membrane in a tilted panel filtration system for fouling control in activated sludge filtration. 778:012174. 2020
- Case Study of sewerage pipe installation using Pipe Jacking and Micro-tunnelling Boring Machine (MTBM) in Ipoh. 932:012047. 2020
- Catalytic transfer hydrogenation of castor oil using glycerolbased reaction. 736:042040. 2020
- Challenges of implementing green procurement in public construction projects in Malaysia. 849:012047. 2020
- Characterisation of oil palm trunk and frond as fuel for biomass thermochemical. 863:012011. 2020
- Comparative Study of Total Phenolic Content and Total Flavonoid Content Extraction from Guava Juices by Progressive Freeze Concentration and Evaporation. 778:012170. 2020
- Cultivation of microalgae in fluidized bed bioreactor: impacts of light intensity and CO2 concentration. 736:022018. 2020
- Development of dead-end system calculation model for water reticulation design using Microsoft Excel with optimized algorithm: a case study at regional operations center (ROC) Melaka, Malaysia. 849:012094. 2020
- Development of mixed matrix membrane comprising titanium (IV) oxide dispersed with octaisobutyl polyhedral oligomeric silsesquioxane. 736:052015. 2020
- Development of temperature-insensitive fibre bragg grating pressure transducer. 788:012088. 2020
- Effect of CO2 Concentration and Liquid to Gas Ratio on CO2 Absorption from Simulated Biogas Using Monoethanolamine Solution. 991:012133. 2020
- Effect of Coolant Temperature and Stirring Rate in the Separation of Oil from Bilge Water using a Stirred Freeze Crystallizer. 778:012143. 2020
- Effect of Stirring Rate and Freezing Time on the Percentage of Recovery of Residual Oil from Palm Oil Mill Effluent via a Stirred Freeze Crystallizer. 778:012171. 2020
- Effect of [emim][BF4] ionic liquid concentration on ionic liquid-polymeric membrane (ILPM) for CO2/CH4 separation. 736:022028. 2020
- Effect of bath temperature on sodium diethyldithiocarbamate trihydrate loading of halloysite nanotube. 863:012062. 2020
- Effect of reaction time and microwave power on coil temperature during microwave-metal interaction pyrolysis of plastics. 863:012007. 2020
- Effects of Different Activating Agent on the Physicochemical Properties of Rice Husk Derived Graphene (GRHA). 991:012112. 2020
- Elucidating the non-linear effect of process parameters on hydrogen production by catalytic methane reforming: an artificial intelligence approach. 991:012078. 2020
- Enhancement of CO2 permeation properties of polymeric membrane by incorporating metal organic framework. 736:052008. 2020
- Evaluation and optimization of the coagulation-flocculation process using conventional rice starch in potable water treatment. 736:072009. 2020
- Experimental and Numerical Assessment on S-shaped Diffuser performance with different Turbulence Intensity. 765:012046. 2020
- Fabrication of 6FDA-based composite membranes loaded with MIL-125 (Ti) for CO2/CH4 separation. 736:052018. 2020
- Finned spacer panel system for fouling control in Chlorella vulgaris harvesting. 736:062009. 2020
- Formation of NaY zeolite membrane: influence of intermediate layer and its characterization. 736:052019. 2020
- Influence of flow limiter and grain shape factor of sand particles on erosion activity in pipeline. 943:012024. 2020
- Influence of non-covalently functionalized graphene nanoplatelets on viscosity and wettability for improved oil mobility at reservoir conditions. 863:012024. 2020
- Integrated Mitigation Strategy Model for Carbon Accounting and Sustainability Index to Encounter Palm Oil Mill Weaknesses Holistically. 884:012012. 2020
- Investigation of gap losses in a modified compound parabolic concentrating collector with evacuated tube receiver. 863:012010. 2020
- Investigation of stability, dispersion, and thermal conductivity of functionalized multi-walled carbon nanotube based nanofluid. 863:012012. 2020
- Modeling of CO2-MEA absorption system in the packed column using Sulzer DX structured packing. 736:022059. 2020
- Modeling the photocatalytic degradation of 1,2-Dihydroxybenzene using Multilayer Perceptron Neural Networks. 870:012057. 2020
- Modified ISR hyper-heuristic for tuning automatic genetic clustering chromosome size. 932:012065. 2020
- Monolayer grafting of APTES modified graphene oxide on silica coated magnetite: Synthesis, characterization and application in heavy oil removal. 943:012023. 2020
- Optimization of fractional freezing process for bioethanol purification. 736:022102. 2020
- Optimization of multiple quality characteristics for injection moulded polyamide helical gear via integration of Taguchi method and Grey relational analysis. 932:012122. 2020
- PI/NCC Carbon Membrane: Effect of Additives loading Towards Hydrogen Separation. 736:022002. 2020
- Performance Experimental Study on Stepped Type Basin Solar Still To Produce Salt and Fresh Water. 990:012026. 2020
- Performance studies on co-gasification between coal/sawdust and coal/wood pellet using RSM. 736:022085. 2020
- Potential of range extender electric vehicles (REEVS). 884:012093. 2020
- Predictive simulation of single cylinder n-butanol HCCI engine. 884:012099. 2020
- Preface. 965:011001. 2020
- Preliminary study of plant extract on seed germination. 736:062006. 2020
- Preparation and physicochemical properties of zeolitic imidazolate framework-8 (ZIF-8)/rice husk derived graphene (GRHA) nanohybrid composites. 736:052012. 2020
- Preparation of Highly Hydrophobic PVDF-HFP Membrane with Anti-Wettability Characteristic. 778:012176. 2020
- Remediation on underground water pollution using Fenton Oxidation Method. 736:072013. 2020
- Removal of ammonia by palm oil clinker (POC) as submerged fixed media in sequence batch reactor (SBR) mode. 849:012024. 2020
- Restoration of pretreated palm oil mill effluent using TiO2 based photocatalytic system: An optimization study. 736:042035. 2020
- Retention of Bioactive Compound in the Concentration of Centella Asiatica Extract through Progressive Freezing. 778:012175. 2020
- Review on the application of distributed optical fibre sensing in slope monitoring. 849:012030. 2020
- Sensitivity analysis of xylose production process using aspen plus. 736:022110. 2020
- Sequential optimization of a water-based polygeneration system in ethylene glycol production. 722:012049. 2020
- Start-up of simultaneous nitrification, anammox and denitrification-sequential batch reactor (SNAD-SBR) for treating anaerobic palm oil mill (POME) Digester Effluent. 736:042024. 2020
- Study of progressive freeze concentration and eutectic freeze crystallization technique for salt recovery. 778:012167. 2020
- Study on the effect of ZIF-8 nanoparticles on the transport behavior of CH4 and CO2 gases in polysulfone membrane. 839:012001. 2020
- Study on the effect of ultrasonic wave amplitude on de-emulsification of crude oil to enhance production process. 863:012004. 2020
- Sustainability assessment of levulinic acid and succinic acid production from empty fruit bunch. 778:012140. 2020
- Syngas production through steam and CO2 reforming of methane over Ni-based catalyst-A Review. 736:042032. 2020
- Synthesis and Characterization of MSU-2 for CO2Adsorption. 991:012076. 2020
- Synthesis and Enhancement of Thermal Conductivity of Surfactant Free MWCNTs-Jatropha Oil-based Nanofluid. 736:022076. 2020
- Synthesis and characterization of MSU-2 synthesized by using tetraethylorthosilicate and Triton X-100. 736:042026. 2020
- Synthesis of high-porosity hybrid geopolymer/alginate adsorbent for effective removal of methylene blue and optimization of parameters using RSM. 991:012082. 2020
- The effects of temperature, residence time and particle size on a charcoal produced from coconut shell. 863:012005. 2020
- The prospect and challenges of renewable hydrogen production in Iraq. 737:012197. 2020
- Thermogravimetric kinetics of catalytic and non-catalytic pyrolytic conversion of palm kernel shell with acid treated coal bottom ash. 736:042029. 2020
- Two-Stages Carbon Emission Pinch Analysis for Integrated System of Renewable Energy and Electric Vehicle. 884:012023. 2020
- Urethane based nanocomposite coated proppants for improved crush resistance during hydraulic fracturing. 863:012013. 2020
- Water quality monitoring along Kinta River in peninsular Malaysia. 991:012097. 2020
- A Feature Extraction Technique Based on Factor Analysis for Pulsed Eddy Current Defects Categorization. 554:012001. 2019
- A Feature Extraction Technique Based on Factor Analysis for Pulsed Eddy Current Defects Categorization. 554:012001. 2019
- Analysis of Mobile Robot Indoor Mapping using GMapping Based SLAM with Different Parameter. 705:012037. 2019
- Analytical hierarchy process application of body in white modular sub-assembly for automotive manufacturing in Malaysia – A case study. 469:012004. 2019
- Assessment of heat pumping technology in oleochemical fatty acid fractionation. 702:012012. 2019
- Behaviour of kenaf fibre reinforced composite. 513:012006. 2019
- Co-gasification of coal and empty fruit bunch in an entrained flow gasifier: A process simulation study. 702:012005. 2019
- Computation of vertical bearing capacity factor Nc of strip footing by FEM. 527:012017. 2019
- Corrosion of aluminium in water-in-diesel-emulsion fuel. 542:012004. 2019
- Deployment of an FMEA-Integrated Framework to Improve Operational Performance in Semiconductor Manufacturing: A Case Study. 530:012040. 2019
- Effects of Waste Denim Fibre (WDF) on the physical and rheological properties of bitumen. 527:012047. 2019
- Establishing the Level of BIM implementation – A Case Study in Melaka, Malaysia. 601:012024. 2019
- Fractionation of oleochemical fatty acid using vacuum dividing wall column: A controllability analysis. 702:012022. 2019
- Investigation of Plastering Effect in Casing-while-Drilling – A CFD Study. 495:012071. 2019
- Kinetics of Mixed Amino Acid and Ionic Liquid on CO2 Hydrate Formation. 495:012073. 2019
- Monitoring subsurface ground movement using fibre optic inclinometer sensor. 527:012040. 2019
- Optimization of Laminated Composites Characteristics via integration of Chamis Equation, Taguchi method and Principal Component Analysis. 551:012110. 2019
- Performance modelling and validation on co-gasification of coal and sawdust pellet in research-scale downdraft reactor. 702:012023. 2019
- Preface. 702:011001. 2019
- Temperature control of vacuum dividing wall column – case study on oleochemical fatty acid fractionation. 702:012020. 2019
- Thermal properties of cool asphalt concrete containing phase change material. 527:012049. 2019
- A Preliminary Experimental Investigation of Wet Fine Erosion in Two-Phase Flow. 328:012023. 2018
- Additive Manufacturing Technology for Biomedical Components: A review. 328:012003. 2018
- Advanced Aeration Using Finned Panel Spacer For Fouling Control In Produced Water Membrane Filtration. 429:012022. 2018
- An In-Depth Review on Direct Additive Manufacturing of Metals. 328:012005. 2018
- Application of Electrolyte Based Model on Ionic Liquids-Methane Hydrates Phase Boundary. 458:012073. 2018
- Application of Electromagnetic Induction Technique to Measure the Void Fraction in Oil/Gas Two Phase Flow. 328:012030. 2018
- Bit selection using field drilling data and mathematical investigation. 328:012008. 2018
- Chemical reactor inherent safety index at preliminary design stage. 458:012048. 2018
- Concatenation of carbonaceous nanofillers for mixed matrix membrane development. 458:012008. 2018
- Controlling corrosion rate of Magnesium alloy using powder mixed electrical discharge machining. 344:012010. 2018
- Decontamination of benzene from aqueous solution by green functionalization of activated carbon. 458:012056. 2018
- Density Measurement of Aqueous solution of Tetrapropylammonium Hydroxide at different Temperatures and Concentrations: Data and Correlation. 458:012010. 2018
- Distillation column inherent safety index at preliminary design stage. 458:012047. 2018
- Early Shear Failure Prediction in Incremental Sheet Forming Process Using FEM and ANN. 328:012031. 2018
- Effect of Solvent Vapor Treatment on Electrospun Nylon 6,6 Nanofiber Membrane. 429:012019. 2018
- Effect of The natural Green Materials on Methane Hydrate Formation Kinetics. 458:012074. 2018
- Effect of processing parameters on the shrinkage behaviour of injection moulded polypropylene gear. 429:012099. 2018
- Effect of solvents on the morphology and performance of Polyethersulfone (PES) polymeric membranes material for CO2/CH4 separation. 290:012074. 2018
- Effect of the Density and the Refractive Index on the Toxicity of Imidazolium Ionic Liquids: A study of Ionic Interactions. 458:012086. 2018
- Effects Of Welding On The Fatigue Behaviour Of Commercial Aluminum AA-1100 Joints. 346:012065. 2018
- Effects of Na: Al and water: solid ratios on the mechanical properties of fly ash based geopolymer. 458:012011. 2018
- Estimation of safe environmental concentrations of ionic liquids towards bacteria by chemical toxicity distribution method. 458:012038. 2018
- Evaluation of Tetraethylammonium Chloride on Methane Gas Hydrate Phase Conditions. 458:012071. 2018
- Evaluation on the Presence of Nano Silver Particle in Improving a Conventional Water-based Drilling Fluid. 358:012060. 2018
- Experimental Equipment Validation for Methane (CH4) and Carbon Dioxide (CO2) Hydrates. 344:012025. 2018
- Fabrication and analysis of HNBR-Silica / Carbon Phenolic ablative composites as an effective thermal protection system (TPS). 458:012015. 2018
- Flatwise Compressive Properties of Kenaf/Polypropylene Honeycomb Core. 370:012031. 2018
- Formation of pure NaX zeolite: Effect of ageing and hydrothermal synthesis parameters. 458:012002. 2018
- Graphene nanoplatelets as high-performance filtration control material in water-based drilling fluids. 352:012025. 2018
- Hydraulic flow units for reservoir characterization: A successful application on arab-d carbonate. 380:012020. 2018
- Hydraulic flow units for reservoir characterization: A successful application on arab-d carbonate. 380:012020. 2018
- Identification of corrosion product on medium carbon steel under the exposure of Banda Aceh’s atmosphere. 352:012004. 2018
- In-plane shear strength analysis of Basalt Fiber-Reinforced Epoxy Laminates with Biowaste Catalyst Free Carbon. 414:012031. 2018
- Influence of Heat Treatment on the Corrosion of Carbon Steel in Environment Containing Carbon Dioxide and Acetic Acid. 370:012039. 2018
- Investigating the effect of silver nanoparticles on carbon dioxide hydrates formation. 458:012058. 2018
- Investigating the effects of rock porosity and permeability on the performance of nitrogen injection into a southern Iranian oil reservoirs through neural network. 328:012021. 2018
- Investigation of Boron addition and compaction pressure on the compactibility, densification and microhardness of 316L Stainless Steel. 344:012023. 2018
- Investigation on Simultaneous Effects of Shot Peen and Austenitizing Time and Temperature on Grain Size and Microstructure of Austenitic Manganese Steel (Hadfield). 328:012006. 2018
- Investigation on the effect of THF on Nitrogen Hydrate formation under isobaric condition. 334:012056. 2018
- Iridium Oxide pH Sensor Based on Stainless Steel Wire for pH Mapping on Metal Surface. 328:012014. 2018
- Low energy solution ball milling of graphene nanoplatelets (GNPs) reinforced aluminium nanocomposites and its mechanical properties. 380:012009. 2018
- Modified SPC for short run test and measurement process in multi-stations. 328:012009. 2018
- Nanocarbon-based enhanced squeeze treatment for improved scale management. 458:012044. 2018
- Numerical Investigation of Liquid Carryover in T-Junction with Different Diameter Ratios. 328:012007. 2018
- Optimization of Progressive Freeze Concentration on Apple Juice via Response Surface Methodology. 358:012042. 2018
- Optimization of Recycled Glass Fibre-Reinforced Plastics Gear via Integration of the Taguchi Method and Grey Relational Analysis. 318:012061. 2018
- Phase identification of natural gas system with high CO2 content through simulation approach using Peng-Robinson model. 458:012068. 2018
- Photocatalytic water splitting over titania supported copper and nickel oxide in photoelectrochemical cell; optimization of photoconversion efficiency. 348:012007. 2018
- Physicochemical and FTIR Study of Diesel-Hydrogen Peroxide Fuel Blend. 344:012026. 2018
- Removal of anionic surfactant sodium dodecylbenzenesulfonate from water using fly ash adsorbent. 458:012043. 2018
- Rheological Behaviour of Water-in-Light Crude Oil Emulsion. 358:012067. 2018
- Semi-clathratic impact of tetrabutylammonium hydroxide on the carbon dioxide hydrates. 458:012060. 2018
- Study on the Effect of Diamond Grain Size on Wear of Polycrystalline Diamond Compact Cutter. 328:012004. 2018
- Synergistic effect of binary fillers (MCM-41/C20) hybrid membrane for CO2/CH4 separation. 458:012014. 2018
- System identification based proxy modeling of a reservoir under iWAG. 458:012055. 2018
- The Effect of Acidic Gases and Thermodynamic Inhibitors on the Hydrates Phase Boundary of Synthetic Malaysia Natural Gas. 458:012016. 2018
- The Effect of Concentration Staging on Performance of Produced Water treatment using Forward Osmosis. 429:012021. 2018
- The effect of zeolite suspension concentration on the formation of seed layer via vacuum seeding prior to NaX zeolite membranes growth. 380:012019. 2018
- The integration of elastic wave properties and machine learning for the distribution of petrophysical properties in reservoir modeling. 352:012024. 2018
- Thermokinetics of SO3H-functionalized dicationic ionic liquids: Effect of anions. 458:012072. 2018
- Toxicity prediction of ionic liquids based on Daphnia magna by using density functional theory. 344:012017. 2018
- Validation of Analytical Damping Ratio by Fatigue Stress Limit. 328:012025. 2018
- Wear Detection of Drill Bit by Image-based Technique. 328:012011. 2018
- Zeolite NaY Synthesis by using Sodium Silicate and Colloidal Silica as Silica Source. 458:012001. 2018
- Zeolitic Imidazolate Framework-8 Membrane for H2/CO2 Separation: Experimental and Modeling. 318:012002. 2018
- A review of walking energy harvesting using piezoelectric materials. 291:012026. 2017
- Adsorption Isotherm of Chromium (Vi) into Zncl2Impregnated Activated Carbon Derived by Jatropha Curcas Seed Hull. 293:012013. 2017
- Adsorption of Lead ions onto Activated Carbon derived from Sugarcane bagasse. 201:012034. 2017
- An investigation of membership functions on performance of ANFIS for solving classification problems. 226:012103. 2017
- Analysis of Manning’s and Drag Coefficients for Flexible Submerged Vegetation. 216:012046. 2017
- Aromatic Polyamines Covalent Triazine Polymer as Sorbent for CO2Adsorption. 226:012173. 2017
- Cogging force investigation of a free piston permanent magnet linear generator. 257:012055. 2017
- Communication, coordination and cooperation in construction projects: business environment and human behaviours. 291:012003. 2017
- Comparison of Energy Absorption of Aluminium-composite Tubes Subjected to Axial Loading. 205:012020. 2017
- Comparison of rheological properties of graphene / carbon nanotube hydrogenated oil based biodegradable drilling fluid. 206:012042. 2017
- Comparison of various advanced oxidation processes used in remediation of industrial wastewater laden with recalcitrant pollutants. 206:012089. 2017
- Conversion of glycerol to polyglycerol over waste duck-bones as a catalyst in solvent free etherification process. 226:012073. 2017
- Development of Fibre Bragg grating (FBG) dynamic pressure transducer with diminutive voltage inconsistency. 257:012080. 2017
- Effect of Casing Imperfection on the Casing Strength in Steam Injection Wells. 267:012019. 2017
- Effect of Mineral Filler type on Strength of Roller Compacted Rubbercrete for Pavement Applications. 201:012011. 2017
- Effect of basalt fibres reinforcement and aluminum trihydrate on the thermal properties of intumescent fire retardant coatings. 226:012185. 2017
- Effect of heat treatment on mechanical properties and microstructure of selective laser melting 316L stainless steel. 257:012021. 2017
- Effective Safety Management in Construction Project. 291:012018. 2017
- Fabrication of 6FDA-durene membrane incorporated with zeolite T and aminosilane grafted zeolite T for CO2/CH4 separation. 226:012169. 2017
- Finite element analysis of residual stress in cold expanded plate with different thickness and expansion ratio. 257:012019. 2017
- Formulation of geopolymer cement using mixture of slag and class f fly ash for oil well cementing. 201:012014. 2017
- Homogenization Effect on Nanostructure and Conductivity of Polyaniline Nanofibre Synthesis by Mini-Emulsion Polymerization Technique. 293:012012. 2017
- Humic acid batteries derived from vermicomposts at different C/N ratios. 206:012067. 2017
- Kinetics of heavy metal removal in a suspended and immobilized bioreactors. 206:012098. 2017
- Molecular simulation and mathematical modelling of glass transition temperature depression induced by CO2 plasticization in Polysulfone membranes. 226:012172. 2017
- On Heat Transfer Analysis for a Sphere of Combustible Material of Variable Thermal Conductivity. 269:012062. 2017
- Optimisation of nano-silica modified self-compacting high-Volume fly ash mortar. 201:012013. 2017
- Optimization of bone drilling parameters using Taguchi method based on finite element analysis. 203:012016. 2017
- Parameter optimization and stretch enhancement of AISI 316 sheet using rapid prototyping technique. 257:012006. 2017
- Quality planning in Construction Project. 291:012017. 2017
- Recent advancement of hybrid materials used in chemical enhanced oil recovery (CEOR): A review. 206:012007. 2017
- Study of pyrolysed acid and based treated coconut coir as green photocatalyst substrate. 293:012010. 2017
- Synthesis of Amino-Impregnated ZIF-8 for CO2 Adsorption. 226:012164. 2017
- The impact of electron beam irradiation on Low density polyethylene and Ethylene vinyl acetate. 204:012005. 2017
- The use of an improved technique to reduce the variability of output voltage in real-time Fibre Bragg Grating based monitoring system. 257:012001. 2017
- Time Overrun in Construction Project. 291:012016. 2017
- Defect Detection of Fiberglass Composite Laminates (FGCL) with Ultrasonic A-Scan Signal Measurement. 114:012106. 2016
- Effects of nano-sized boron nitride (BN) reinforcement in expandable graphite based in-tumescent fire retardant coating. 146:012037. 2016
- Evolution of geopolymer binders: a review. 133:012052. 2016
- Geopolymer concrete for structural use: Recent findings and limitations. 133:012021. 2016
- Performance ofElaeis GuineensisLeaves Compost in Filter Media for Stormwater Treament Through Column Study. 136:012049. 2016
- Real-time monitoring system of composite aircraft wings utilizing Fibre Bragg Grating sensor. 152:012024. 2016
- Silicanizing Process On Mild Steel Substrate by Using Tronoh Silica Sand: Microstructure, composition and coating growth. 114:012117. 2016
- A computation ANN model for quantifying the global solar radiation: A case study of Al-Aqabah-Jordan. 88:012073. 2015
- Cuttings-liquid frictional pressure loss model for horizontal narrow annular flow with rotating drillpipe. 78:012009. 2015
- Design and development of split-parallel through-the road retrofit hybrid electric vehicle with in-wheel motors. 100:012039. 2015
- Effect of phase advance on the brushless dc motor torque speed respond. 100:012004. 2015
- Effect of wear on the burst strength of l-80 steel casing. 100:012027. 2015
- Experimental Investigation and 3D Finite Element Prediction of Temperature Distribution during Travelling Heat Sourced from Oxyacetylene Flame. 78:012025. 2015
- Experimental study on the effect of varying syngas composition on the emissions of dual fuel CI engine operating at various engine speeds. 100:012006. 2015
- Geometric Optimization of Thermo-electric Coolers Using Simulated Annealing. 88:012012. 2015
- Impact of the electric compressor for automotive air conditioning system on fuel consumption and performance analysis. 100:012028. 2015
- Investigation of mechanical field weakening of axial flux permanent magnet motor. 100:012026. 2015
- Modeling of diesel/CNG mixing in a pre-injection chamber. 100:012044. 2015
- Numerical analyses for improved hydrodynamics of deep water torpedo anchor. 100:012059. 2015
- Numerical analysis of cocurrent conical and cylindrical axial cyclone separators. 100:012054. 2015
- Numerical modelling of multi-pass solar dryer filled with granite pebbles for thermal storage enhancement. 88:012011. 2015
- Numerical simulation of rock cutting using 2D AUTODYN. 100:012052. 2015
- Performance and energy saving analysis of a refrigerator using hydrocarbon mixture (HC-R134a) as working fluid. 100:012010. 2015
- Performance investigation of a waste heat driven pressurized adsorption refrigeration cycle. 100:012029. 2015
- Performance investigation of the S-Rotors. 100:012043. 2015
- Performance of CO2 enrich CNG in direct injection engine. 100:012041. 2015
- Study of Solar Driven Silica gel-Water based Adsorption Chiller. 88:012068. 2015
- Study of heat transfer due to turbulent flow of nanofluids through rib-groove channel. 88:012017. 2015
- Temperature Dependences on Various Types of Photovoltaic (PV) Panel. 88:012066. 2015
- The combustion behavior of diesel/CNG mixtures in a constant volume combustion chamber. 100:012032. 2015
- Theoretical Study of New Combined Absorption-Ejector Refrigeration System. 88:012059. 2015
- Mechanical and electrical properties of low density polyethylene filled with carbon nanotubes. 64:012001. 2014
- Thermal performance of alumina filler reinforced intumescent fire retardant coating for structural application. 60:012023. 2014
- Hierarchical Self Organizing Map for Novelty Detection using Mobile Robot with Robust Sensor. 53:012018. 2013
- Microstructure and Nanoindentation Characterization of Low Temperature Hybrid Treated layer on Austenitic Stainless Steel. 46:012043. 2013
- Design and Performance of 20 Watts Portable Solar Generator. 36:012040. 2012
- Development of a Solar Assisted Drying System Using Double-Pass Solar Collector with Finned Absorber. 36:012010. 2012
- Empirical Relationship between Relative Electrical Conductivity and Relative Density of the Al-Foam Fabricated through Pressure Assisted Sintering/Dissolution Process. 17:012014. 2011
- Purification of Carbon Nanotubes Synthesized by Catalytic Decomposition of Methane using Bimetallic Fe-Co Catalysts Supported on MgO. 17:012025. 2011