overview
- PROF.DR Sharul Bin Kamarudin specialization is production planning and control, lean manufacturing, maintenance technology and management, manufacturing processes. His working experience from 1995 until now.
Close
Kamaruddin, Shahrul Bin
Positions
- Associate Professor, Universiti Teknologi PETRONAS
- Member, Center of Corrosion Research , Institute of Sustainable Energy & Resources
- Associate Professor, Mechanical Engineering Department , Faculty of Engineering
Overview
Affiliation
member of
Publications
selected publications
-
academic article
-
Optimization of Topology and Mechanical Properties of 3D Printed Hollow and Thin-Walled Structures via Integration of Taguchi Method and Grey Relational Analysis.
Journal of Advanced Research in Applied Mechanics.
115:18-35.
2024
-
A comprehensive validation framework addressing utility parameter validation for application in small and medium enterprises (SMEs):A case study in pharmaceutical industry.
Cogent Engineering.
10.
2023
-
Correlation Analysis of Established Creep Failure Models through Computational Modelling for SS-304 Material.
Metals.
13:197.
2023
-
Enhancement of the efficiency of internal supply chain production system through process-to-process interaction.
International Journal of Productivity and Quality Management.
35:332.
2022
-
Limitations on the computational analysis of creep failure models: A review.
Engineering Failure Analysis.
134:105968.
2022
-
Numerical investigation of API 31 cyclone separator for mechanical seal piping plan for rotating machineries.
Alexandria Engineering Journal.
61:1597-1606.
2022
-
Solving production bottleneck through developed define-measure-delegate-implement-control in solving production bottleneck.
International Journal of Six Sigma and Competitive Advantage.
14:209.
2022
-
Creep Parameters Determination by Omega Model to Norton Bailey Law by Regression Analysis for Austenitic Steel SS-304.
Solid State Phenomena.
324:188-197.
2021
-
Curve Fitting for Damage Evolution through Regression Analysis for the Kachanov–Rabotnov Model to the Norton–Bailey Creep Law of SS-316 Material.
Materials.
14:5518.
2021
-
Investigation on universal tool wear measurement technique using image-based cross-correlation analysis.
Measurement.
169:108489.
2021
-
Optimization of multiple quality characteristics for injection moulded polyamide helical gear via integration of Taguchi method and Grey relational analysis.
IOP Conference Series: Materials Science and Engineering.
932:012122.
2020
-
Short-run univariate quality control approaches.
International Journal of Productivity and Quality Management.
31:483.
2020
-
An integrated model for process parameter adjustment to recover throughput shortage in semiconductor assembly: A case study.
Journal of Industrial Engineering and Management.
12:340.
2019
-
Deployment of an FMEA-Integrated Framework to Improve Operational Performance in Semiconductor Manufacturing: A Case Study.
IOP Conference Series: Materials Science and Engineering.
530:012040.
2019
-
Development of opportunistic maintenance policy towards optimal maintenance system (OPTOMS) model.
Journal of Quality in Maintenance Engineering.
26:129-165.
2019
-
Factory-in-factory concept as a new business model for automotive production system.
International Journal of Six Sigma and Competitive Advantage.
11:157.
2019
-
Leanness production system through improving of upstream process based on check-act-plan-do cycle.
International Journal of Six Sigma and Competitive Advantage.
11:95.
2019
-
Modified short-run statistical process control for test and measurement process.
The International Journal of Advanced Manufacturing Technology.
100:1531-1548.
2019
-
Optimization of Laminated Composites Characteristics via integration of Chamis Equation, Taguchi method and Principal Component Analysis.
IOP Conference Series: Materials Science and Engineering.
551:012110.
2019
-
Reclamation of steel shots by acid leaching for powder metallurgy applications.
Advances in Mechanical Engineering.
11:168781401986696.
2019
-
Automating computer simulation and statistical analysis in production planning and control research.
International Journal of Computers and Applications.
40:25-41.
2018
-
Effect of processing parameters on the shrinkage behaviour of injection moulded polypropylene gear.
IOP Conference Series: Materials Science and Engineering.
429:012099.
2018
-
Knowledge and Talent Development in the Electronics and Electrical (EE) Industry of Malaysia.
Asian Journal of Social Science.
46:668-705.
2018
-
Modified SPC for short run test and measurement process in multi-stations.
IOP Conference Series: Materials Science and Engineering.
328:012009.
2018
-
Optimization of Recycled Glass Fibre-Reinforced Plastics Gear via Integration of the Taguchi Method and Grey Relational Analysis.
IOP Conference Series: Materials Science and Engineering.
318:012061.
2018
-
The Model Development of an Effective Triggering System of Production Kanban Size towards Just-In-Time (JIT) Production.
Advances in Science, Technology and Engineering Systems Journal.
3:298-306.
2018
-
Wear Detection of Drill Bit by Image-based Technique.
IOP Conference Series: Materials Science and Engineering.
328:012011.
2018
-
A review on the manufacturing defects of complex-shaped laminate in aircraft composite structures.
The International Journal of Advanced Manufacturing Technology.
91:4081-4094.
2017
-
Evaluation on the feasibility of using bamboo fillers in plastic gear manufacturing via the Taguchi optimization method.
Journal of Physics: Conference Series.
908:012009.
2017
-
Investigating the effects of PDC cutters geometry on ROP using the Taguchi technique.
Journal of Physics: Conference Series.
908:012041.
2017
-
Investigation on Wear Behavior of Bamboo Filler Reinforcement of Injection Moulded Plastic Gear.
Key Engineering Materials.
737:119-123.
2017
-
Investigation on the effects of processing parameters on shrinkage behaviour and tensile properties of injection moulded plastic gear via the Taguchi method.
Journal of Physics: Conference Series.
908:012049.
2017
-
Preventive maintenance (PM) planning: a review.
Journal of Quality in Maintenance Engineering.
23:114-143.
2017
-
Structured maintenance engineering policy development based on a production machine process perspective.
Journal of Quality in Maintenance Engineering.
23:180-194.
2017
-
The use of response surface methodology (RSM) to optimize the acid digestion parameters in fiber volume fraction test of aircraft composite structures.
The International Journal of Advanced Manufacturing Technology.
90:3739-3748.
2017
-
An integrated simulation with design on experiment approach for shop floor improvement solution selections.
European J. of Industrial Engineering.
10:479.
2016
-
Application of re-layout approach for cellular layout in manual assembly process.
International Journal of Services and Operations Management.
24:167.
2016
-
ESTABLISHING AN OPTIMAL QUALITY PLANNING DECISION THROUGH DISCRETE EVENT SIMULATION: ANALYSIS CASE STUDY.
Jurnal Teknologi.
78.
2016
-
PRACTICAL PRODUCTION LAYOUT DESIGN FOR MULTI-PRODUCT AND SMALL-LOT-SIZE PRODUCTION: A CASE STUDY.
Jurnal Teknologi.
78.
2016
-
Assessment of distance-based multi-attribute group decision-making methods from a maintenance strategy perspective.
Journal of Industrial Engineering International.
11:73-85.
2015
-
Categorisation of process improvement models from a conceptual perspective.
International Journal of Process Management and Benchmarking.
5:113.
2015
-
EVALUATION ON ABSENTEEISM EFFECT IN PRODUCTION LINE AT AIRCRAFT COMPOSITE MANUFACTURER.
Jurnal Teknologi.
77.
2015
-
Improvement process selection framework for the formation of improvement solution alternatives.
International Journal of Productivity and Performance Management.
64:702-722.
2015
-
Maintenance policy optimization—literature review and directions.
The International Journal of Advanced Manufacturing Technology.
76:1263-1283.
2015
-
The Role of Industrial Clustering and Manufacturing Flexibility in Achieving High Innovation Capability and Operational Performance in Indonesian Manufacturing SMEs.
Industrial Engineering and Management Systems.
14:236-247.
2015
-
A case study of grouping machines based on failure components planning model.
International Journal of Industrial and Systems Engineering.
18:31.
2014
-
Development of a model for optimal maintenance policy selection.
European J. of Industrial Engineering.
8:50.
2014
-
House of Improvement Model to Enhance Prioritisation of Solutions in Decision Making: a Case Study.
International Journal of Engineering.
27.
2014
-
Investigating the Effects of Blending Ratio and Injection Parameters on the Tensile Properties of Glass Fiber-Filled Nylon 66 Composite Gear.
Applied Mechanics and Materials.
548-549:43-47.
2014
-
Maintenance policy selection model – a case study in the palm oil industry.
Journal of Manufacturing Technology Management.
25:415-435.
2014
-
Manufacturing Flexibility and Operational Performance: Empirical Evidence in Manufacturing SMEs.
Applied Mechanics and Materials.
660:966-970.
2014
-
Multiple Reprocessing of Gear Using Recycled Polypropylene.
Applied Mechanics and Materials.
660:204-208.
2014
-
Opportunistic maintenance (OM) as a new advancement in maintenance approaches.
Journal of Quality in Maintenance Engineering.
20:98-121.
2014
-
Problem Solving Methodology in Industry.
Applied Mechanics and Materials.
533:510-515.
2014
-
Determination of Ultrasonic Welding Optimal Parameters for Thermoplastic Material of Manufacturing Products.
Jurnal Teknologi.
64.
2013
-
Development of maintenance policy evaluation model: a case study of the semiconductor industry for achieving production demand.
International Journal of Logistics Systems and Management.
15:405.
2013
-
Evolution of Triz Application for Manufacturing Industries.
Applied Mechanics and Materials.
330:760-767.
2013
-
Importance of Problem Statement in Solving Industry Problems.
Applied Mechanics and Materials.
421:857-863.
2013
-
Investigating the Effects of Injection Moulding Process Parameters on Multiple Tensile Characteristics of Plastic Spur Gear via Experimental Approach.
Advanced Materials Research.
748:544-548.
2013
-
Performance measurement of dispatching rules in hybrid flow shop.
International Journal of Agile Systems and Management.
6:345.
2013
-
Preventive Maintenance Checklist towards Effective Maintenance System: A Case Study in Semiconductor Industry.
Advanced Materials Research.
748:1208-1211.
2013
-
Production System Improvement by Integration of FMEA with 5-Whys Analysis.
Advanced Materials Research.
748:1203-1207.
2013
-
Reduction of response time during machine breakdown: a case study in semiconductor industry.
International Journal of Logistics Systems and Management.
16:167.
2013
-
The impact of variety of orders and different number of workers on production scheduling performance.
Journal of Manufacturing Technology Management.
24:1123-1142.
2013
-
Void Content Determination of Fiber Reinforced Polymers by Acid Digestion Method.
Advanced Materials Research.
795:64-68.
2013
-
A Study of Hybrid Optimization of Injection Moulding Process Parameters for Plastic Gear.
Advanced Materials Research.
591-593:2135-2138.
2012
-
A review of condition-based maintenance decision-making.
European J. of Industrial Engineering.
6:519.
2012
-
An overview of time-based and condition-based maintenance in industrial application.
Computers & Industrial Engineering.
63:135-149.
2012
-
External Setup in SMED Improvement in an Injection Molding Manufacturing Company.
Applied Mechanics and Materials.
229-231:2551-2555.
2012
-
Failure analysis of machinery component by considering external factors and multiple failure modes – A case study in the processing industry.
Engineering Failure Analysis.
25:182-192.
2012
-
Implementation of Autonomous Maintenance in Semiconductor Industry: A Case Study.
Advanced Materials Research.
591-593:708-711.
2012
-
Implementation of Decision Tree for Maintenance Policy Decision Making - A Case Study in Semiconductor Industry.
Advanced Materials Research.
591-593:704-707.
2012
-
Influence of slab milling process parameters on surface integrity of HSLA: a multi-performance characteristics optimization.
The International Journal of Advanced Manufacturing Technology.
61:859-871.
2012
-
Maintenance policy selection: a review towards building proper selection model.
International Journal of Industrial and Systems Engineering.
10:355.
2012
-
Modeling of Aircraft Composite Parts Using Simulation.
Advanced Materials Research.
591-593:557-560.
2012
-
Optimal Buffer Allocation For Unpaced Balanced And Unbalanced Mean Processing Time.
Jurnal Teknologi.
2012
-
Quality control and design optimisation of plastic product using Taguchi method: a comprehensive review.
International Journal of Plastics Technology.
16:194-209.
2012
-
Shop floor performance measurement a case study in injection moulding industry.
International Journal of Agile Systems and Management.
5:103.
2012
-
Assembly line conversion approach: a simulation evaluation.
International Journal of Agile Systems and Management.
4:342.
2011
-
Development of autonomous maintenance implementation framework for semiconductor industries.
International Journal of Industrial and Systems Engineering.
9:268.
2011
-
Implementation of the Workforce Competency Model for assessing maintenance workers' performance.
International Journal of Productivity and Quality Management.
7:440.
2011
-
Investigating the Effects of Injection Molding Parameters on the Mechanical Properties of Recycled Plastic Parts Using the Taguchi Method.
Materials and Manufacturing Processes.
26:202-209.
2011
-
Multi-Response Optimization of Injection Moulding Processing Parameters Using the Taguchi Method.
Polymer-Plastics Technology and Engineering.
50:1519-1526.
2011
-
Optimization of mechanical properties of recycled plastic products via optimal processing parameters using the Taguchi method.
Journal of Materials Processing Technology.
211:1989-1994.
2011
-
Preventive replacement schedule: a case study at a processing industry.
International Journal of Industrial and Systems Engineering.
8:386.
2011
-
The effect of layout design on productivity: an empirical study.
International Journal of Productivity and Quality Management.
7:484.
2011
-
Workforce competency model (WFCM).
International Journal of Productivity and Performance Management.
61:24-45.
2011
-
Feasibility study of use of recycled High Density Polyethylene and multi response optimization of injection moulding parameters using combined grey relational and principal component analyses.
Materials & Design (1980-2015).
31:2925-2931.
2010
-
A Study on the Effect of Epoxy Molding Compound (EMC) Rheology During Encapsulation of Stacked-CHIP Scale Packages (S-CSP).
Journal of Reinforced Plastics and Composites.
28:2527-2538.
2009
-
ISO 13485:2003.
The TQM Journal.
21:6-19.
2009
-
Modeling of vial and ball motions for an effective mechanical milling process.
Journal of Materials Processing Technology.
209:4312-4319.
2009
-
Study on the Effect of Stack Thickness During Encapsulation of Stacked-Chip Scale Packages (S-CSP).
Journal of Microelectronics and Electronic Packaging.
5:62-67.
2008
-
Implementation of dust control system using management and planning tools (MPT).
Management of Environmental Quality: An International Journal.
17:390-408.
2006
-
Optimization of Topology and Mechanical Properties of 3D Printed Hollow and Thin-Walled Structures via Integration of Taguchi Method and Grey Relational Analysis.
Journal of Advanced Research in Applied Mechanics.
115:18-35.
2024
-
chapter
-
A Review of Six Sigma Implementation in Manufacturing Industries.
IT Solutions for Sustainable Living.
9-15.
2024
-
Wastes Detection Using a Value Stream Mapping (VSM) Technique in an Electronic-Based Manufacturing Company.
IT Solutions for Sustainable Living.
1-7.
2024
-
A Review of Six Sigma Implementation in Manufacturing Industries.
IT Solutions for Sustainable Living.
9-15.
2024
-
conference paper
-
Multi-factors optimization of injection moulded plastic bearing via Taguchi method.
INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019).
2024
-
Optimisation of 3d printing parameters of acrylonitrile-butadiene-styrene thin-walled and hollow structure via integration Taguchi method and principle component analysis.
INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019).
2024
-
Optimization of wear behavior on unreinforced/glass fiber reinforced plastic injection moulded gear via integration of Taguchi method and principal component analysis.
INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019).
2021
-
Micromechanics analysis of rhombus model via finite elements integrated with Taguchi method and principle component analysis.
INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019).
2018
-
PDC cutter optimization using response surface methodology with orthogonal arrays.
INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019).
2018
-
Towards just-in-time (JIT) production system through enhancing part preparation process
2017
-
Assessing Halal logistics competence: An Islamic-based and resource-based view
2015
-
Numerical assessment on makespan minimization by adopting NEH heuristics in permutation flow shop
2015
-
The effects of organizational innovation on operational performance and other types of innovation
2015
-
Inspection of ultrasonic welding for thermoplastic materials joining
2013
-
Lean production in manual assembly line — A case study
2012
-
Maintenance decisions making method for repairable system by using output-based maintenance technique: A case study at pulp manufacturing industry
2011
-
Development of Human Reliability Model for Evaluating Maintenance Workforce Reliability: A Case Study in Electronic Packaging Industry
2008
-
Failure analysis for Copper Wire Bonding process from machine perspective
2008
-
Application of Autosched AP Simulation Model in Wafer Fab
2006
-
Multi-factors optimization of injection moulded plastic bearing via Taguchi method.
INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019).
2024
Background
education and training
Contact
full name
- Shahrul Bin Kamaruddin
primary email
- shahrul.k@utp.edu.my
webpage
Publications in VIVO
Co-author Network
Map of Science
- Contact Info
- Websites