publication venue for
- A Converted Two-Stroke Cycle Engine for Compression Ignition Combustion. 663:331-335. 2014
- A Review of Bio-Oil Upgrading by Catalytic Hydrodeoxygenation. 625:255-258. 2014
- A Review on Robustness of Covalent Organic Polymers for CO<sub>2</sub> Capture. 625:237-240. 2014
- Active Suspension System to Improve Ride Comfort Performance of Electric Vehicle (EV) Conversion. 663:208-212. 2014
- Adsorption of Azo Dye Orange II by Supported TiO<sub>2</sub>: A Review. 625:770-774. 2014
- Adsorptive Removal of Ni<sup>2+</sup> from Aqueous Solution onto Rice Husk-Based Activated Carbon. 625:893-896. 2014
- An Equation of State for the Liquid Phase. 625:582-585. 2014
- An Experimental Study on the Effects of Biaxial Bending due to Eccentric Load on RC Beam. 567:339-344. 2014
- An Integrated Framework for Refinery Scheduling and Operational Optimization. 625:390-393. 2014
- Analytical Prediction of the Mechanical Properties of High Performance PVA Fiber Reinforced Concrete. 567:345-350. 2014
- Application of Experimental Statistical Method in Optimizing Preparation Variables for Cu-Ni/TiO<sub>2</sub> Photocatalyst. 625:856-859. 2014
- Aspects of Carbon Dioxide Mitigation by <i>Nannochloropsis oculata</i> Cultured in a Photobioreactor. 625:775-779. 2014
- Ba-SAPO-34 Zeolite Membrane for CO<sub>2</sub>/N<sub>2</sub> Separation: Process Optimization. 625:648-652. 2014
- Biosorption of Heavy Metal Ions, Oil and Grease from Industrial Waste Water by Banana Peel. 625:749-752. 2014
- Broadside Vessel Collision Forces for Conventional Riser-Guard. 567:210-215. 2014
- CFD Study on Syngas Dispersion for Biomass Process Industry. 625:410-413. 2014
- Challenges for Implementation of Building Information Modeling (BIM) in Malaysian Construction Industry. 567:559-564. 2014
- Characterization of Stand Chopped Basalt Fiber Self – Compacting Reinforced Concrete (SCB-SCC). 567:356-361. 2014
- Comparative Study of Linear Co-Volume Based Mixing Rules for Equation of State/ Excess Gibbs Energy (EOS/G<sup>E</sup>) Models for CO<sub>2</sub> – MEA and CO<sub>2</sub> – MDEA Systems. 625:541-544. 2014
- Comparison Studies of Criado and Coats-Redfern Methods for Co-Gasification of Rubber Seed Shell with High Density Polyethylene Mixtures. 472:621-625. 2014
- Comparison of Soil Water Retention Functions for Humid Tropical Soils. 567:8-13. 2014
- Compliance Audit Model for Managing Process Safety in Process Industries. 625:406-409. 2014
- Consequence Study of Pressurized CO<sub>2</sub> Release Containing Impurities with Obstacles. 625:474-477. 2014
- Desulfurization of Fuel Using Ionic Liquids: Computational Selection of Cation and Anion. 625:118-122. 2014
- Determination of Adsorption Capacity of Agricultural-Based Carbon for Ni (II) Adsorption from Aqueous Solution. 567:20-25. 2014
- Development of Morphology Dependent Titania Nanomaterial for Photo Degradation of Dyes. 625:349-352. 2014
- Development of Platform Selection Tool for Offshore Decommissioning in Malaysia. 567:222-227. 2014
- Developments in Mercury Removal from Natural Gas - A Short Review. 625:223-228. 2014
- Driving Efficiency through Hydrocarbon for Green Car Air Conditioning. 493:45-49. 2014
- Drying Shrinkage of Fly Ash-Based Self-Compacting Geopolymer Concrete. 567:362-368. 2014
- Durability of Sugar Cane Bagasse Ash (SCBA) Concrete towards Chloride Ion Penetration. 567:369-374. 2014
- Economic Optimization of CO<sub>2</sub> Capture Process Using MEA-MDEA Mixtures. 625:422-425. 2014
- Ecotoxicity of Pyridinium Based Ionic Liquids: A Review. 625:152-155. 2014
- Effect of Anodes on Hydrodynamic Coefficients of Tubular Cylinders - Model Tests. 567:241-246. 2014
- Effect of Ball Milling on the Catalytic Conversion of Cellulose to Levulinic Acid. 625:353-356. 2014
- Effect of Calcined Kaolin on the Mechanical Properties of High-Strength Concrete as Cement Replacing Material. 567:375-380. 2014
- Effect of Chopped Basalt Fiber on the Fresh and Hardened Properties of Fly Ash High Strength Concrete. 567:381-386. 2014
- Effect of Mn and Pb Promoters on the Performance of Cu/ZnO-Catalyst in CO<sub>2</sub> Hydrogenation to Methanol. 625:289-292. 2014
- Effect of Modification Techniques on Surface of Carbon Nanofiber as Catalyst Support. 625:345-348. 2014
- Effect of Modified MIL-53 with Multi-Wall Carbon Nanotubes and Nanofibers on CO<sub>2</sub> Adsorption. 625:870-873. 2014
- Effect of Na/Al and Si/Al Ratios on Adhesion Strength of Geopolymers as Coating Material. 625:85-89. 2014
- Effect of Superficial Gas Velocity on the Separation Efficiency of Inline Horizontal Swirl Tube Separator. 625:566-569. 2014
- Effects of Intercalated Mono-, Di- and Triethanolammonium Cations on the Structural and Surface Characteristics of Sodium Form of Bentonite. 625:98-101. 2014
- Effects of Ionic Liquid Blending in Polymeric Membrane: Physical Properties and Performance Evaluation. 625:680-684. 2014
- Effects of Marine Growth on Hydrodynamic Coefficients of Rigid Tubular Cylinders. 567:247-252. 2014
- Effects of Montmorillonite (MMT) Inorganic Fillers on Polyvinylidene (PVDF) Mixed Matrix Membrane. 625:696-700. 2014
- Effects of Twist Drill Point Angle on Thrust Force and Delamination Factor in Hybrid Fiber Composites Drilling. 564:501-506. 2014
- Electron-Beam Irradiation of Halogen Free Flame Retardant Polymers for Wire and Cable Applications. 625:29-33. 2014
- Embodied Carbon of Buildings: Tools, Methods and Strategies. 567:565-570. 2014
- Empirical Correlations for Sizing Adiabatic Capillary Tube Using LPG as Refrigerant in Split-Type Air-Conditioner. 493:99-104. 2014
- Energy Analysis and Compressor Performance of Refrigerator System Using Programmable Logic Control (PLC). 554:469-473. 2014
- Energy Savings on Automotive Air Conditioner Using Liquid-Suction Heat Exchanger Subcooler. 554:256-260. 2014
- Establishing Correlation between Leaf Spring Specifications and Camber Drop. 660:794-798. 2014
- Estimation of Counterweight for Shaking Force Balancing of a Crank-Rocker Mechanism. 663:135-140. 2014
- Evaluation of Electrical Capacitance Tomography Thresholding Techniques for Void Fraction Measurement of Gas-Liquid System. 625:439-443. 2014
- Experimental Investigation on Thermal Conduction of Carbon Nanotubes Reinforced Copper Matrix Composites. 564:455-460. 2014
- Experimental Investigation on the Performance of Four Types of Solar Stills in Malaysia. 567:56-61. 2014
- Experimental Study on the Performance of In-Cabin Ventilation System. 493:251-255. 2014
- Extractive Desulphurization of Model Oil Using Sulphonium Based Ionic Liquids. 625:205-208. 2014
- Fast Pyrolysis of Oil Palm Kernel Shell in a Fluidized Bed Reactor: The Effect of Biomass Size on the Yields of Pyrolysis Products. 625:608-611. 2014
- Fast Pyrolysis of Oil Palm Kernel Shell in a Fluidized Bed Reactor: The Effect of Pyrolysis Temperature on the Yields of Pyrolysis Products. 625:616-619. 2014
- Fine Structural Analysis of Solvent Activated Cu-BTC for Carbon Dioxide Capture. 625:209-212. 2014
- Flow Dynamics Investigation of CO<sub>2</sub>/CH<sub>4</sub> Gas Mixture through Porous Media Using Computational Approach. 625:369-372. 2014
- Hydrodynamic Forces on Linear and Multi-Dimensional Arrays of Circular Cylinders. 567:259-264. 2014
- Hydrogen (Al+HCl) Improve the Combustion of Gasoline Engine and Reduction the Hydrocarbon and Carbon Monoxide up 33% to 34%. 660:436-441. 2014
- Identification of Critical Factors to System Performance Using Availability Modeling and Simulation Analysis. 490-491:1759-1763. 2014
- Identification of Multi-Input Multi-Output Systems Using Combined Direct and Indirect Methods. 625:414-417. 2014
- Identifying Thermal and pH Stability of Thiols Compound in Garlic Extract. 625:57-60. 2014
- Impact of Motor Size & Efficiency on Acceleration, Fuel Consumption & Emissions of Split-Axle Through-the-Road Parallel Hybrid Electric Vehicle. 663:498-503. 2014
- Improvement of Engine Performance Using an Adaptive Valve Lift and Timing (AVLT) Mechanism at High Engine Speeds. 663:359-365. 2014
- Improving Rate of Penetration for PDC Drill Bit Using Reverse Engineering. 607:153-160. 2014
- Interfacial Defects on Mixed Matrix Membranes and Mitigation Techniques for Gas Separation: A Review. 625:653-656. 2014
- Investigating Foamed Bitumen Viscosity. 660:254-258. 2014
- Investigating the Effects of Blending Ratio and Injection Parameters on the Tensile Properties of Glass Fiber-Filled Nylon 66 Composite Gear. 548-549:43-47. 2014
- Kinetic Analysis on Catalytic Co-Gasification of Rubber Seed Shell and High Density Polyethylene Mixtures. 625:251-254. 2014
- Kinetic Study of PAHs Degradation in Produced Water Using Ti/RuO<sub>2</sub> Anode. 567:80-85. 2014
- Manufacturing Flexibility and Operational Performance: Empirical Evidence in Manufacturing SMEs. 660:966-970. 2014
- Mathematical Modeling for the Prediction of Depth of Penetration in Double Pulse GMA Welding Using Fractional Factorial Method. 660:347-351. 2014
- Mathematical Modeling of the Radial Crossflow Hollow Fiber Membrane Module for Multi-Component Gas Separation. 625:726-729. 2014
- Mathematical Modelling for Hydrogen Production from Steam Gasification of Cellulose. 625:176-179. 2014
- Measuring and ANFIS Modelling for Thermal Conductivity of Cu/Zn Bimetallic Nanofluids. 663:311-316. 2014
- Mechanical Properties of Engineered Cementitious Composites Mixture. 567:428-433. 2014
- Microwave Energy Pretreated <i>In Situ</i> Transesterification of Jatropha Curcas L in the Presence of Phase Transfer Catalyst. 625:267-270. 2014
- Microwave Incinerated Rice Husk Ash (MIRHA) and Used Engine Oil (UEO): Towards Sustainable Concrete Production. 567:434-439. 2014
- Modeling of CO<sub>2</sub> Capture by Amine Solution (MDEA) in Hollow Fiber Membranes. 625:537-540. 2014
- Modelling and Validation of Vehicle Ride Comfort Model. 554:515-519. 2014
- Modelling of Adams-Bohart and Yoon-Nelson on the Removal of Oil from Water Using Microwave Incinerated Rice Husk Ash (MIRHA). 625:788-791. 2014
- Modelling of CO<sub>2</sub> Loading in DEA by Using Peak Ratio of Raman Spectroscopy. 625:188-191. 2014
- Molecular Simulation for Piperazinium Based ILs: Effects of Alkyl Chain, Concentration and Anions on Henry’s Constants. 625:448-453. 2014
- Monitoring Heart Rate and Body Temperature Using Wireless Technology (Zigbee). 490-491:1565-1574. 2014
- Monoethanolamine (MEA) Wastewater Treatment Using Photo-Fenton Oxidation. 625:792-795. 2014
- Multiple Reprocessing of Gear Using Recycled Polypropylene. 660:204-208. 2014
- Novel Approach and Setup for Multi Component Mixtures Separation and Analysis at Offshore Conditions. 625:600-603. 2014
- Novel Approach and Setup for Multi Phase Mixtures Separation and Analysis at Offshore Conditions. 625:669-672. 2014
- Numerical Coupling of Drilling Vibration to Riser’s Oscillation. 548-549:1893-1897. 2014
- Optimization of Naphthalene Extraction from its Mixture with Base Oil and Dibenzothiophene by BMIMDMP Ionic Liquid Using Response Surface Methodology (RSM). 625:50-56. 2014
- Optimization of Temperature Rise during CO<sub>2</sub> Absorption Process Using Response Surface Methodology. 625:42-45. 2014
- Overcoming Limitation in DFM Using Layer Manufacturing. 660:94-98. 2014
- Performance Analysis of Hydrocarbon Mixture to Replace R134a in an Automotive Air Conditioning System. 554:444-448. 2014
- Performance Study of Electric Compressor in Non-Electric Vehicle. 554:464-468. 2014
- Phase Behavior and Ternary Diagram Construction for Membrane Forming Polycarbonate Solutions. 625:7-10. 2014
- Photodegradation of Aqueous Diisopropanolamine Using Cu/TiO<sub>2</sub>: Effect of Calcination Temperature and Duration. 625:847-850. 2014
- Physicochemical Properties of Diethanolamine-Functionalized Si-MCM-41. 625:11-14. 2014
- Physiochemical Properties of Pyrolysis Oil Derived from Fast Pyrolysis of Wet and Dried Rice Husk in a Free Fall Reactor. 625:604-607. 2014
- Polymer-Nanoclay Mixed Matrix Membranes for CO<sub>2</sub>/CH<sub>4</sub> Separation: A Review. 625:690-695. 2014
- Prediction of Suspended Sediments in a Hyper – Concentrated River Using Neural Networks. 567:122-127. 2014
- Predictive Stress-Strain Models for High Strength Concrete Subjected to Uniaxial Compression. 567:476-481. 2014
- Preparation of Biodiesel from Waste Cooking Oil Catalyzed by Basic Ionic Liquid. 625:874-876. 2014
- Private Finance Initiatives (PFI): Getting it Right. 567:601-606. 2014
- Problem Solving Methodology in Industry. 533:510-515. 2014
- Pyrolyzed Waste Engine Oil Properties by Microwave-Induced Reactor. 625:673-676. 2014
- Raman Spectroscopic Study for the Determination of Monoethanolamine Concentration. 625:709-713. 2014
- Recent Advances of Using Ionic Liquid in Lignocellulosic Biomass Degradation. 625:834-837. 2014
- Removal of Amines from Wastewater Using Membrane Separation Processes. 625:639-643. 2014
- Removal of Methylene Blue from Aqueous Solution by Ionic Liquid. 625:241-244. 2014
- Resource Management in Construction Project. 567:607-612. 2014
- Review on Extraction and Characterization of Castor Seed Oil. 625:916-919. 2014
- Review on Pyrolysis of Hardwood Residue to Biofuel. 625:714-717. 2014
- Separation of Benzene and Cyclohexane with Mixed Solvent Using Extractive Distillation. 625:578-581. 2014
- Separation of Naphthenic Acid Using Hydroxide Based Ionic Liquids. 625:570-573. 2014
- Shear Capacity of RC Beams with Web Openings Strengthened with Multi Layers of CFRP. 567:494-498. 2014
- Smoke Simulation in an Underground Train Station Using Computational Fluid Dynamic. 663:366-372. 2014
- Solubility of CO<sub>2</sub> in Piperazine (PZ) Activated Aqueous Solutions of 2-Amino-2-methyl-1-propanol (AMP) at Elevated Pressures. 625:233-236. 2014
- Solubility of CO<sub>2</sub> in an Aqueous Ammonium Based Ionic Liquid. 625:549-552. 2014
- Spray Characteristics of Diesel-CNG Dual Fuel Jet Using Schlieren Imaging Technique. 663:58-63. 2014
- Starch Based Soil Conditioner and Slow Release System. 625:877-880. 2014
- Strength Development of Concrete Incorporating Metakaolin and PVA Fibres. 567:505-510. 2014
- Strengthening Schemes for Flexure and Torsion Using FRP Laminates: A State of Art Review. 567:511-516. 2014
- Structural and Magnetic Properties of Ni<sub>0.5</sub>Zn<sub>0.5</sub>Fe<sub>2</sub>O<sub>4</sub> Synthesized through the Sol-Gel Method. 664:75-79. 2014
- Study and Analysis of Power System Stabiliser Performance Using Artificial Neural Network. 575:605-609. 2014
- Study of CO<sub>2</sub> Solubility in Aqueous Blend of Potassium Carbonate Promoted with Glycine. 625:19-23. 2014
- Study of the Effect of Surface Roughness on Droplet Spreading Behavior Using CFD Modeling. 625:378-381. 2014
- Study on the Recovery of 1-butyl-3-methylimidazolium-based Ionic Liquids. 625:144-147. 2014
- Techno-Economic Evaluation of Cryogenic Networks for Separation of CO<sub>2</sub> from Natural Gas. 625:635-638. 2014
- The Effect of High Carbon Dioxide Content on the Performance and Emission Characteristics of a Direct Injection (DI) Compressed Natural Gas Engine. 663:64-70. 2014
- The Effect of Surface Area, Pore Volume, and Pore Size Distribution on the Modified Multiwalled Carbon Nanotubes. 625:148-151. 2014
- The Impact of Stormwater Runoff on Nutrient Removal in Sand Columns. 567:155-160. 2014
- The Study of Thermal Comfort and Noise Level in Battery Plate Factory. 663:474-479. 2014
- Thermodynamic Properties of Flufenamic Ionic Liquids. 625:586-591. 2014
- Three-Tier Inherent Safety Quantification (3-TISQ) for Toxic Release at Preliminary Design Stage. 625:426-430. 2014
- Treatment of Wastewater Using an Integrated Submerged Attached Growth System. 567:167-171. 2014
- Twin Pulsating Jets Impingement Heat Transfer for Fuel Preheating in Automotives. 663:322-328. 2014
- Volatile Fatty Acids Production through Degradation of Biomass by Anaerobic Digestion (Mesophilic and Thermophilic). 567:172-176. 2014
- Wave Transmission over a Submerged Porous Breakwater an Experimental Study. 567:319-324. 2014
- pH Dependence on Biosorption of Pb (II) by <i>P</i><i>. </i><i>amaryllifolius </i>Roxb. 625:757-760. 2014
- A Case Study on Indoor Comfort of Lecture Rooms in University Buildings. 393:821-826. 2013
- A Study on IAQ in a Welding Laboratory. 393:947-952. 2013
- A Unified Adaptive Fanger's Model for Thermal Comfort in Tropical Countries. 393:799-808. 2013
- Analysis of a Tubular Linear Permanent Magnet Motor for Reciprocating Compressor Applications. 448-453:2114-2119. 2013
- Automatic Meter Reader Using Zigbee. 303-306:991-994. 2013
- Bending and Moment Stability in Reel Mechanisms. 353-356:3316-3319. 2013
- Biodiesel Production from Palm Oil in a Millichannel Reactor. 465-466:232-236. 2013
- Combustion Characteristics of Compressed Natural Gas in a Direct Microchannel-Injection Engine under Various Operating Conditions. 315:793-798. 2013
- Contact Pressure Evaluation of a Gear Pair along the Line of Action Using Finite Element Analysis. 393:403-408. 2013
- Controlled Auto-Ignition Combustion in a Two-Stroke Cycle Engine Using Hot Burned Gases. 388:201-205. 2013
- Design and Modeling of a CMOS MEMS Gravimetric Sensor. 446-447:1073-1077. 2013
- Design of a Four-Stroke Homogeneous Charge Compression Ignition Engine. 388:229-234. 2013
- Development of Sediment Brick Utilizing Reservoir Sediment and Fly Ash. 420:276-280. 2013
- Development of the Shape Functions for Fatigue Test Using Digital Image Correlation. 465-466:862-866. 2013
- Effects of Different Granular Viscosity Models on the Bubbling Fluidized Bed - A Numerical Approach. 393:857-862. 2013
- Electrodes with Supported Catalyst Layer in Unitized Reversible Fuel Cell System: A Review. 316-317:960-963. 2013
- Evaluation of Noise and Air Flow on a Motorized Adaptive Valve Lift and Timing Engine. 315:482-487. 2013
- Evolution of Triz Application for Manufacturing Industries. 330:760-767. 2013
- Exergy Analysis of a Micro-Gas Turbine Fueled with Syngas. 465-466:142-148. 2013
- Experimental Investigation of a Gasoline-to-LPG Converted Engine Performance at Various Injection and Cylinder Pressures with Respect to Propane Spray Structures. 315:20-24. 2013
- Experimental Study of Airless Spray Jet Breakup at Elevated Temperature and Pressure. 393:711-716. 2013
- Experimental Study on the Replacement of HFC-R134a by Hydrocarbons in Automotive Air Conditioning System. 388:111-115. 2013
- Fabrication and Microstructural Analysis of CNTs Reinforced Copper Matrix Nanocomposites via MIM Technique. 459:11-17. 2013
- Failure Pressure Estimation of Corroded Pipeline with Different Depths of Interacting Defects Subjected to Internal Pressure. 393:1005-1010. 2013
- Fill Removal in Wellbore Using Coiled Tubing. 393:863-871. 2013
- Fundamental Frequency Estimation in Power System through the Utilization of Sliding Window-LMS Method. 446-447:764-771. 2013
- Greenhouse Remote Control and Monitoring System. 295-298:940-944. 2013
- Hydrogen Blended with Gasoline for Internal Combustion Engine Effect on Specific Fuel Consumption Based on Load Tests (L0,L1,L2). 465-466:1239-1244. 2013
- Hydrogen as an Alternative: Life Cycle Cost Analysis between Hydrogen Internal Combustion Engine (Al+Hci) and Gasoline Engine Based on Brake Specific Fuel Consumption. 315:423-427. 2013
- Importance of Problem Statement in Solving Industry Problems. 421:857-863. 2013
- Influence of Woven and Cross-Ply Laminates on Mechanical Properties of Coir Epoxy Composite. 315:136-140. 2013
- Investigation of Evacuated Tube Collector Performance at High Temperature Mode Using TRNSYS Simulation Model. 465-466:155-160. 2013
- Investigation of Various Mixtures of HC290/HC600 Refrigerants in Adiabatic Capillary Tube Used in Split-Type Air-Conditioner. 388:71-75. 2013
- Load Capacity of Partially Textured Journal Bearing with Trapezoidal Recess. 315:830-834. 2013
- Lumped Components Modeling of Double Pass Solar Collector with Porous Matrixes. 465-466:216-220. 2013
- Mathematical Modeling for the Regenerator of Liquid Desiccant Air-Conditioning System. 465-466:226-231. 2013
- Meshless Local B-Spline Basis Functions-FD Method and its Application for Heat Conduction Problem with Spatially Varying Heat Generation. 465-466:490-495. 2013
- Numerical Investigation on the Effect of Down Stand Structure in Fire Compartment on Smoke Contamination Atrium Upper Balconies. 465-466:480-484. 2013
- Operating Characteristics of Gasifier Cookstove Using Different Biomass Materials. 393:516-521. 2013
- Optimization of One Legged Hopping Robot Hardware Parameters via Solidworks. 393:544-549. 2013
- Performance Analysis of Photo Voltaic Trombe Wall for Tropical Climate. 465-466:211-215. 2013
- Performance Study of Activated Carbon – Hydrofluoro Olefin Based Adsorption Cooling System. 465-466:206-210. 2013
- Performance Study of Waste Heat Driven Pressurized Adsorption Chiller. 315:380-384. 2013
- Retrofitting R-22 Split Type Air Conditioning with Hydrocarbon (HCR-22) Refrigerant. 388:91-95. 2013
- Study of Indoor Air Quality in Academic Buildings of a University. 315:389-393. 2013
- Study on Indoor Air Quality of a Small Office in a Tropical Country. 393:827-831. 2013
- Synthesis and Characterization of Nano-Structured Mixed Oxides. 446-447:196-200. 2013
- The CFD Simulation of Tray Dryer Design for Kenaf Core Drying. 393:717-722. 2013
- The Effect of Drying Air Temperature and Humidity on the Drying Kinetic of Kenaf Core. 315:710-714. 2013
- The Effect of Fuel Additives on Gasoline Heating Value and Spark Ignition Engine Performance: Case Study. 388:301-306. 2013
- Using Computational Fluid Dynamics Simulation to Perform Fire Investigation. 393:845-850. 2013
- Visual Study of Hollow Cone Water Spray Jet Breakup Process at Elevated Temperatures and Pressures. 465-466:485-489. 2013
- A Study on Alternative Fuel Blending for Homogeneous Charge Compression Ignition (HCCI) Engine Using Palm Oil Methyl Ester and RON 97. 165:305-309. 2012
- External Setup in SMED Improvement in an Injection Molding Manufacturing Company. 229-231:2551-2555. 2012
- Homogenous Charge Compression Ignition (HCCI) Technique: A Review for Application in Two-Stroke Gasoline Engines. 165:53-57. 2012
- Hydrogen Blended with Gasoline, Diesel, Natural Gas (NGV) as an Alternative Fuel for ICE in Malaysia. 165:1-5. 2012
- Behavior of Carbon and Nitrogen after Low Temperature Thermochemical Treatment on Austenitic and Duplex Stainless Steel. 110-116:621-626. 2011
- Characteristics of Lean and Stoichiometric Combustion of Compressed Natural Gas in a Direct Injection Engine. 110-116:357-369. 2011
- Designing an Alternative Game-Based for Learning Thai Language. 143-144:475-479. 2011
- Hydrodynamics of Oil Palm Frond in a Swirling Fluidized Bed Dryer. 117-119:1829-1833. 2011
- Modeling and Simulation of Moving Iron Linear Generator (MILG). 110-116:2464-2468. 2011
- Performance Analysis of a Semicircular Free Surface Ocean Structure under the Different Water Depths. 90-93:2782-2789. 2011
- Analyzing Speed Accuracy Trade-Off in Control Movement Mechanism with Error Enforcement. 39:169-175. 2010
- Mobile Learning: An Application Prototype for AVL Tree Learning Object. 39:176-181. 2010