A

Abbas, G. and Irawan, S. and Kumar, S. and Elrayah, A.A.I. (2013) Improving oil well cement slurry performance using hydroxypropylmethylcellulose polymer. Advanced Materials Research, 787. pp. 222-227. ISSN 10226680

Abbas, G. and Irawan, S. and Memon, K.R. and Kumar, S. and Elrayah, A.A.I. (2013) Hydroxypropylmethyl cellulose as a primary viscosifying agent in cement slurry at high temperature. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1218-1225. ISSN 22298649

Abbas, M.A. and Ahmad, W.F.W. and Kalid, K.S. (2013) Heuristics evaluation of preschool cognitive skills learning system. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 671-682. ISSN 03029743

Abbas, M.K. and Karsiti, M.N. and Napiah, M. and Brahim, S. (2013) Integrated self-organized traffic light controllers for signalized intersections. International Review of Automatic Control, 6 (4). pp. 481-488. ISSN 19746059

Abd, T.H. and Aljunid, S.A. and Fadhil, H.A. and Junita, M.N. and Saad, M. (2013) Impact of Multi-Diagonal Code on High-Speed Spectral Amplitude Coding Optical Code Division Multiple-Access Networks. Arabian Journal for Science and Engineering, 38 (9). pp. 2389-2397. ISSN 2193567X

Abdul Karim, S.A. and Alwi, S.A. (2013) Electricity load forecasting in UTP using moving averages and exponential smoothing techniques. Applied Mathematical Sciences, 7 (77-80). pp. 4003-4014. ISSN 1312885X

Abdul Karim, S.A.B. and Yahya, N. (2013) Seabed loging data curve fitting using cubic splines. Applied Mathematical Sciences, 7 (81-84). pp. 4015-4026. ISSN 1312885X

Abdul Khalil, H.P.S. and Fizree, H.M. and Bhat, A.H. and Jawaid, M. and Abdullah, C.K. (2013) Development and characterization of epoxy nanocomposites based on nano-structured oil palm ash. Composites Part B: Engineering, 53. pp. 324-333. ISSN 13598368

Abdulkarim, M. and Shafie, A. and Wan Ahmad, W.F. and Razali, R. (2013) A simulation study on factors affecting airwaves using factorial design. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 206-217. ISSN 03029743

Abdullah, M.R.T.L. and Hussin, Z. and Asra and Zakaria, A.R. (2013) Mlearning scaffolding model for undergraduate English language learning: Bridging formal and informal learning. Turkish Online Journal of Educational Technology, 12 (2). pp. 217-233. ISSN 13036521

Abdullah, S.B. and Man, Z. and Bustam, M.A. (2013) Investigation on aromaticity index and double-bond equivalent of aromatic compounds and ionic liquids for fuel desulphurization. Journal of Chemistry, 2013. ISSN 20909063

Abdullah, Z. and Md Nordin, S. and Abdul Aziz, Y. (2013) Building a unique online corporate identity. Marketing Intelligence & Planning, 31 (5). pp. 451-471. ISSN 02634503

Abdus Salam, M. and Sufian, S. and Lwin, Y. (2013) Erratum: Hydrogen Adsorption Study on Mixed Oxides using the Density Functional Theory (Journal of Physics and Chemistry of Solids (2013) (558-564)). Journal of Physics and Chemistry of Solids, 74 (8). p. 1184. ISSN 00223697

Affam, A.C. and Adlan, M.N. (2013) Operational performance of vertical upflow roughing filter for pre-treatment of leachate using limestone filter media. Journal of Urban and Environmental Engineering, 7 (1). pp. 117-125. ISSN 19823932

Affam, A.C. and Chaudhuri, M. (2013) Degradation of pesticides chlorpyrifos, cypermethrin and chlorothalonil in aqueous solution by TiO2 photocatalysis. Journal of Environmental Management, 130. pp. 160-165. ISSN 03014797

Affam, A.C. and Chaudhuri, M. (2013) UV photo-fenton treatment of combined chlorpyrifos, cypermethrin and chlorothalonil pesticides aqueous solution. Nature Environment and Pollution Technology, 12 (1). pp. 105-110. ISSN 09726268

Ahmad, F. and Lau, K.K. and Shariff, A.M. and Fong Yeong, Y. (2013) Temperature and pressure dependence of membrane permeance and its effect on process economics of hollow fiber gas separation system. Journal of Membrane Science, 430. pp. 44-55. ISSN 03767388

Ahmad, F. and Raza, M.R. and Mushan, A.S. and Omer, M.A. (2013) Preparation and fiber fracture of metal matrix composite feed-stock for powder injection molding. International Journal of Powder Metallurgy, 49 (2). pp. 33-38. ISSN 08887462

Ahmad, I. and Abdullah, A. and Alghamdi, A. and Hussain, M. (2013) Optimized intrusion detection mechanism using soft computing techniques. Telecommunication Systems, 52 (4). pp. 2187-2195. ISSN 10184864

Ahmad, I. and Sulaiman, S.B. and Rambli, D.R.B.A. (2013) Optimized real time vertex based deformation using octree and two neighborhood method. Research Journal of Applied Sciences, Engineering and Technology, 5 (17). pp. 4240-4245. ISSN 20407459

Ahmad, J. and Malik, A.S. and Xia, L. and Ashikin, N. (2013) Vegetation encroachment monitoring for transmission lines right-of-ways: A survey. Electric Power Systems Research, 95. pp. 339-352. ISSN 03787796

Ahmad, M.M. and Przybycien, T.M. (2013) Towards optimal aqueous two-phase extraction system flowsheets for protein purification. Journal of Chemical Technology and Biotechnology, 88 (1). pp. 62-71. ISSN 02682575

Ahmad, T. and Mamat, O. and Ahmad, R. and Malik, A.N. (2013) Studying the formation of Fe2SiO4 and pearlite phases in iron-silica sand nanoparticle composites. Defect and Diffusion Forum, 337-33. pp. 39-47. ISSN 10120386

Ahmad Azmy, A. and Karuppanan, S. and Abdul Wahab, A. (2013) Failure pressure estimation of corroded pipeline with different depths of interacting defects subjected to internal pressure. Applied Mechanics and Materials, 393. pp. 1005-1010. ISSN 16609336

Ahmad Fadzil, M.H. and Prakasa, E. and Asirvadam, V.S. and Nugroho, H. and Affandi, A.M. and Hussein, S.H. (2013) 3D surface roughness measurement for scaliness scoring of psoriasis lesions. Computers in Biology and Medicine, 43 (11). pp. 1987-2000. ISSN 00104825

Ahmed, A.M. and Cheong, L.Y. and Zakaria, N. and Metwally, N. (2013) Dynamics of Information Coded in a Single Cooper Pair Box. International Journal of Theoretical Physics, 52 (6). pp. 1979-1988. ISSN 00207748

Ahmed, I. and Idris, A. and Hussain, A. and Yusof, Z.A.M. and Saad Khan, M. (2013) Influence of co-solvent concentration on the properties of dope solution and performance of polyethersulfone membranes. Chemical Engineering and Technology, 36 (10). pp. 1683-1690. ISSN 09307516

Ahmed, M.M. and Kutty, S.R.M. and Khamidi, M.F. and Dominic, P.D.D. (2013) Hazards related to petrol fuel stations during operation and maintenance. Malaysian Construction Research Journal, 12 (1). pp. 99-116. ISSN 19853807

Ahmed, M.M. and Kutty, S.R.M. and Khamidi, M.F. and Othman, I. and Dominic, P.D.D. and Emmanuel, O. (2013) Hazards forecasting and weights determination during operation and maintenance of petrol fuel station. Research Journal of Applied Sciences, Engineering and Technology, 6 (6). pp. 978-982. ISSN 20407459

Ahmed, R. and Chandra, M.S. (2013) Equilibrium modeling in updraft gasifier for refinery sludge gasification using ASPEN PLUS simulator. Applied Mechanics and Materials, 393. pp. 729-734. ISSN 16609336

Ahmed, T.Y. and Ahmad, M.M. and Lam, H.L. and Yusup, S. (2013) Hydrogen from renewable palm kernel shell via enhanced gasification with low carbon dioxide emission. Clean Technologies and Environmental Policy, 15 (3). pp. 513-523. ISSN 1618954X

Aja, O.C. and Al-Kayiem, H.H. and Abdul Karim, Z.A. (2013) Analytical investigation of collector optimum tilt angle at low latitude. Journal of Renewable and Sustainable Energy, 5 (6). ISSN 19417012

Aja, O.C. and Al-Kayiem, H.H. and Abdul Karim, Z.A. (2013) Experimental investigation of the effect of wind speed and wind direction on a solar chimney power plant. WIT Transactions on Ecology and the Environment, 179 VO. pp. 945-955. ISSN 17433541

Akbar, I. and Oehlers, D. and Sadakkathulla, M.A. (2013) The effect os steel yielding on CFRP plated steel member by partial interaction theory. Jurnal Teknologi (Sciences and Engineering), 61 (3). pp. 31-39. ISSN 01279696

Akbar, M.M. and Murugesan, T. (2013) Thermophysical properties of 1-hexyl-3-methylimidazolium tetrafluoroborate hmimBF4 + N-methyldiethanolamine (MDEA) at temperatures (303.15 to 323.15) K. Journal of Molecular Liquids, 177. pp. 54-59. ISSN 01677322

Akhtar, M.N. and Yahya, N. and Nasir, N. (2013) New EM transmitter with Y3Fe3O3 based magnetic feeders potentially used for seabed logging application. Advanced Materials Research, 667. pp. 10-23. ISSN 10226680

Al-Jemeli, M. and Hussin, F.A. (2013) Energy efficient and high throughput composite routing metric for mobile wireless sensor networks. International Review on Computers and Software, 8 (9). pp. 2269-2277. ISSN 18286003

Al-Kayiem, H.H. (2013) Energy sustainability through integrated solar thermal systems. WIT Transactions on Ecology and the Environment, 179 VO. pp. 887-897. ISSN 17433541

Al-Kayiem, H.H. and Jamil, I.E.A. (2013) Theoretical modeling of pseudo hydrostatic force in solid-liquid pipe flow with two layers. Pertanika Journal of Science and Technology, 21 (2). pp. 521-532. ISSN 01287680

Al-Kayiem, H.H. and Lin, S.C. and Lukmon, A. (2013) Review on nanomaterials for thermal energy storage technologies. Nanoscience and Nanotechnology - Asia, 3 (1). pp. 60-71. ISSN 22106812

Al-Mossawy, M.I. and Demiral, B. and Raja, D.M.A. (2013) A relative permeability model to derive fractional-flow functions of water-alternating-gas and surfactant-alternating-gas foam core-floods. Journal of Geophysics and Engineering, 10 (2). ISSN 17422132

Al-Waked, R. and Nasif, M.S. and Morrison, G. and Behnia, M. (2013) CFD simulation of air to air enthalpy heat exchanger. Energy Conversion and Management, 74. pp. 377-385. ISSN 01968904

Al-Wakeel, H.B. and Karim, Z.A.A. and Al-Kayiem, H.H. and Fawad, H. (2013) Numerical simulation of high frequency electromagnetic wave in microwave cavity for soot oxidation. Applied Mechanics and Materials, 459. pp. 310-318. ISSN 16609336

Alashloo, M.M. and Lim, H.-S. and Asadpour, R. and Safarpour, S. (2013) Total Suspended Sediments Mapping by Using ALOS Imagery Over the Coastal Waters of Langkawi Island, Malaysia. Journal of the Indian Society of Remote Sensing, 41 (3). pp. 663-673. ISSN 0255660X

Alhassan, A.M. and Badruddin, N. and Saad, N.M. and Aljunid, S.A. (2013) Performance analysis of wavelength multiplexed SAC OCDMA codes in beat noise mitigation in SAC OCDMA systems. Journal of the European Optical Society, 8. ISSN 19902573

Alhassan, A.M. and Badruddin, N. and Saad, N.M. and Aljunid, S.A. (2013) A divided spectrum balanced detection technique for intensity noisereduction in SAC OCDMA systems. Optik, 124 (23). pp. 5994-5999. ISSN 00304026

Ali, A.S.O. and Asirvadam, V.S.A. and Malik, A.S. and Aziz, A. (2013) A geometrical approach for age-invariant face recognition. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 81-96. ISSN 03029743

Ali, H.O. and Rozan, M.Z. and Abubakar, A. and Zeki, A.M. and Sharif, A.M. and Uddin, M. and Memon, J. (2013) Assessing issues of change impact analysis process for a software projects. World Applied Sciences Journal, 28 (10). pp. 1366-1374. ISSN 18184952

Ali, S. and Mohd Zabidi, N.A. and Abdul Aziz, M.A. and Ahmad, K. and Sidik, M.I. and Muin, M.A. (2013) Effects of synthesis technique on the physical properties of co-fe nanoparticles on cnts support. Malaysian Journal of Microscopy, 9 (1). pp. 47-51. ISSN 18237010

Ali, S. and Zabidi, N.A.M. and Aziz, M.A.A. and Ahmad, K. and Sidik, M.I. and Muin, M.A. (2013) Effects of synthesis technique on the physical properties of co-fe nanoparticles on cnts support. Malaysian Journal of Microscopy, 9 (1). pp. 5-9. ISSN 18237010

Ali, T. and Jung, L.T. and Faye, I. (2013) An angle based flooding protocol for underwater wireless sensor networks. Journal of Engineering and Applied Sciences, 8 (9). pp. 295-303. ISSN 1816949X

Alimanesh, M. and Rouhi, J. and Zainal, N. and Kakooei, S. and Hassan, Z. (2013) Growth of vertically aligned ZnO nanorods arrays by hydrothermal method. Advanced Materials Research, 795. pp. 616-619. ISSN 10226680

Alirr, O. and Jumari, K. (2013) Digital Image Watermarking and Encryption Using DWT and RSA. International Review on Computers and Software, 8 (4). pp. 958-963. ISSN 18286003

Alisjabana, J.M.M. and Shoushtari, M.A. and Ismail, A.P. and Saaid, M. (2013) Improved lifetime pressure drop management for subsurface safety valves in oil and gas wells. Research Journal of Applied Sciences, Engineering and Technology, 5 (3). pp. 727-737. ISSN 20407459

Alser, M.H. and Assaad, M.M. and Hussin, F.A. (2013) A wide-range programmable frequency synthesizer based on a finite state machine filter. International Journal of Electronics, 100 (11). pp. 1546-1556. ISSN 00207217

Altaf, K. and Majdi Abdul Rani, A. and Raghavan, V.R. (2013) Prototype production and experimental analysis for circular and profiled conformal cooling channels in aluminium filled epoxy injection mould tools. Rapid Prototyping Journal, 19 (4). pp. 220-229. ISSN 13552546

Amear, S. and Ariffin, S. and Nordin, A. and Buyamin, N. and Amin, M. and Majid, A. (2013) Performance analysis of absorption and electric chillers at a gas district cooling plant. Asian Journal of Scientific Research, 6 (2). pp. 299-306. ISSN 19921454

Amila, W.A.Z.N. and Alias, A. (2013) Evaluating stakeholders' preferences: Reconciling heritage and sustainability. International Journal of Sustainable Society, 5 (4). pp. 336-349. ISSN 17562538

Amin, H. and Malik, A.S. (2013) Human memory retention and recall processes: A review of EEG and fMRI studies. Neurosciences, 18 (4). pp. 330-334. ISSN 13196138

Amin, H.U. and Malik, A.S. and Subhani, A.R. and Badruddin, N. and Chooi, W.-T. (2013) Dynamics of scalp potential and autonomic nerve activity during intelligence test. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8226 L (PART 1). pp. 9-16. ISSN 03029743

Aminu, M. and Ludin, A.N.B.M. and Matori, A.-N. and Wan Yusof, K. and Dano, L.U. and Chandio, I.A. (2013) A spatial decision support system (SDSS) for sustainable tourism planning in Johor Ramsar sites, Malaysia. Environmental Earth Sciences, 70 (3). pp. 1113-1124. ISSN 18666280

Aminu, M. and Matori, A.-N. and Yusof, K.W. and Zainol, R.B. (2013) A Framework for sustainable tourism planning in johor Ramsar sites, Malaysia: A geographic information system (GIS) based analytic network process (ANP) approach. Research Journal of Applied Sciences, Engineering and Technology, 6 (3). pp. 417-422. ISSN 20407459

Amir, N. and Ahmad, F. and Megat-Yusoff, P.S.M. (2013) Char strength of wool fibre reinforced epoxy-based intumescent coatings (FRIC). Advanced Materials Research, 626. pp. 504-508. ISSN 10226680

Ansari, A. and Bt Shafie, A. and Ansari, S. and Md Said, A.B. and Nyamasvisva, E.T. (2013) Filtration of airwave in seabed logging using principal component analysis. Communications in Computer and Information Science, 414. pp. 56-64. ISSN 18650929

Anuar, M.S. and Aljunid, S.A. and Arief, A.R. and Junita, M.N. and Saad, N.M. (2013) PIN versus Avalanche photodiode gain optimization in zero cross correlation optical code division multiple access system. Optik, 124 (4). pp. 371-375. ISSN 00304026

Ariyanti, S. and Zakaria, M. and Azmi, B.M. (2013) Improvement of hydrophobicity of urea modified tapioca starch film with lignin for slow release fertilizer. Advanced Materials Research, 626. pp. 350-354. ISSN 10226680

Arnirtham, V. and Nagarajan, T. and Krishnan, S. and Hashim, F.M. (2013) SMA Actuation for wrist motion with split-tube flexures. Asian Journal of Scientific Research, 6 (3). pp. 615-620. ISSN 19921454

Arpit and Shafie, A. and Ahmad, W.F. (2013) Automata for modeling reversible probabilistic processes. Applied Mechanics and Materials, 422. pp. 185-190. ISSN 16609336

Arumuggam, K. and Singh, B.S.M. (2013) Optimization of hybrid solar and wind power generation. Journal of Applied Sciences, 13 (6). pp. 869-875. ISSN 18125654

Asfaw, T.D. and Yusof, K.W. and Ahmad, M.H. (2013) Sensitivity analysis of hydroelectric power generation from cascading reservoirs. Advanced Materials Research, 622. pp. 1152-1156. ISSN 10226680

Asfaw, T.D. and Yusof, K.W. and Hashim, A.M. (2013) Competence-oriented decision model for optimizing the operation of a cascading hydroelectric power reservoir. Research Journal of Applied Sciences, Engineering and Technology, 6 (10). pp. 1895-1901. ISSN 20407459

Ashraf, K. and Md Khir, M.H. and Dennis, J.O. and Baharudin, Z. (2013) Erratum: A wideband, frequency up-converting bounded vibration energy harvester for a low frequency environment (Smart Materials and Structures (2013) 22 (025018)). Smart Materials and Structures, 22 (4). ISSN 09641726

Ashraf, K. and Md Khir, M.H. and Dennis, J.O. and Baharudin, Z. (2013) Improved energy harvesting from low frequency vibrations by resonance amplification at multiple frequencies. Sensors and Actuators, A: Physical, 195. pp. 123-132. ISSN 09244247

Ashraf, K. and Md Khir, M.H. and Dennis, J.O. and Baharudin, Z. (2013) A wideband, frequency up-converting bounded vibration energy harvester for a low-frequency environment. Smart Materials and Structures, 22 (2). ISSN 09641726

Asmelash, G.M. and Mamat, O. and Ahmad, F. (2013) Investigation on the effect of silica sand addition in densification of Al2O3-SiO2-ZrO2 composite. Journal of Ceramic Processing Research, 14 (1). pp. 22-26. ISSN 12299162

Asnawi, R. and Wan Ahmad, W.F. and Awang Rambli, D.R. (2013) Robust synchronization models for Presentation System using SMIL-driven approach. Computers and Education, 60 (1). pp. 273-287. ISSN 03601315

Asrul, M. and Othman, M. and Zakaria, M. and Fauzi, M.S. (2013) Surface morphology and tensile strength of natural rubber films filled with sulphur free lignin derived from rubberwood. Journal of Rubber Research, 16 (2). pp. 118-133. ISSN 15111768

Assaad, M. and Alser, M.H. and Bermak, A. (2013) Design and characterization of low power and low noise truly all-digital clock and data recovery circuit for SERDES devices. Journal of Low Power Electronics, 9 (1). pp. 63-72. ISSN 15461998

Assaad, M. and Yohannes, I. and Bermak, A. (2013) Two-stage interface circuit design for a 32-color resolution optical sensor. IEEE Sensors Journal, 13 (2). pp. 610-617. ISSN 1530437X

Atiq-Ur-Rahman and Hasbullah, H. and Najm-Us-Sama (2013) Sub-balanced energy consumption through engineered gaussian deployment strategies in corona-based wireless sensor network. Research Journal of Applied Sciences, Engineering and Technology, 6 (2). pp. 213-222. ISSN 20407459

Atnaw, S.M. and Sulaiman, S.A. and Yusup, S. (2013) Syngas production from downdraft gasification of oil palm fronds. Energy, 61. pp. 491-501. ISSN 03605442

Azam, M.R. and Tan, I.M. and Ismail, L. and Mushtaq, M. and Nadeem, M. and Sagir, M. (2013) Static adsorption of anionic surfactant onto crushed Berea sandstone. Journal of Petroleum Exploration and Production Technology, 3 (3). pp. 195-201. ISSN 21900558

Azeemuddin and Al-Kayiem, H.H. and Gilani, S.I. (2013) Simulation of a collector using waste heat energy in a solar chimney power plant system. WIT Transactions on Ecology and the Environment, 179 VO. pp. 933-944. ISSN 17433541

Aziz, A.A. and �ekercioǧlu, Y.A. and Fitzpatrick, P. and Ivanovich, M. (2013) A survey on distributed topology control techniques for extending the lifetime of battery powered wireless sensor networks. IEEE Communications Surveys and Tutorials, 15 (1). pp. 121-144. ISSN 1553877X

Azizan, N.A. and Lai, F.-W. (2013) Depth penetration of enterprise risk management model in Malaysian government sector. Journal for Global Business Advancement, 6 (2). pp. 138-151. ISSN 1746966X

Azmarini, A.N. and Majid, S.A. and Zakaria, S.H. and Sulaiman, S.A. (2013) A study on IAQ in a welding laboratory. Applied Mechanics and Materials, 393. pp. 947-952. ISSN 16609336

Azmi, A. and Balasubramanian, P. and Abdullah, B. and Zhalehrajabi, E. (2013) Sensitivity of the CFD mesh for a single rising bubble in a hallimond tube. Applied Mechanics and Materials, 372. pp. 26-29. ISSN 16609336

B

Baba, A.A. and Zakariya, M.A. and Baharudin, Z. and Khir, M.H.M. and Ur Rehman, M.Z. and Ahmad, Z.A. and Qasaymeh, Y.M. (2013) Aperture and mutual coupled cylindrical dielectric resonator antenna array. Progress In Electromagnetics Research C, 37. pp. 223-233. ISSN 19378718

Baba, A.A. and Zakariya, M.A. and Baharudin, Z. and Rehman, M.Z.U. and Ain, M.F. and Ahmad, Z.A. (2013) Equivalent lumped-element circuit of aperture and mutually coupled cylindrical dielectric resonator antenna array. Progress In Electromagnetics Research C, 45. pp. 15-31. ISSN 19378718

Badri, T.M. and Al-Kayiem, H.H. (2013) Analytical solution for simply supported and multilayered magneto-thermo-electro-elastic plates. Asian Journal of Scientific Research, 6 (2). pp. 236-244. ISSN 19921454

Baharom, M.B. and Hussain, K. and Day, A.J. (2013) Design of full electric power steering with enhanced performance over that of hydraulic power-assisted steering. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 227 (3). pp. 390-399. ISSN 09544070

Baheta, A.T. and Woldeyohannes, A.D. (2013) Effect of particle size on effective thermal conductivity of nanofluids. Asian Journal of Scientific Research, 6 (2). pp. 339-345. ISSN 19921454

Baig, I. and Ayaz, M. and Jeoti, V. (2013) On the peak-to-average power ratio reduction in mobile WiMAX: A discrete cosine transform matrix precoding based random-interleaved orthogonal frequency division multiple access uplink system. Journal of Network and Computer Applications, 36 (1). pp. 466-475. ISSN 10848045

Baig, I. and Ayaz, M. and Jeoti, V. (2013) A SLM based localized SC-FDMA uplink system with reduced PAPR for LTE-A. Journal of King Saud University - Engineering Sciences, 25 (2). pp. 119-123. ISSN 10183639

Baig, I. and Jeoti, V. (2013) A ZCMT precoding based multicarrier OFDM system to minimize the high PAPR. Wireless Personal Communications, 68 (3). pp. 1135-1145. ISSN 09296212

Baig, I. and Jeoti, V. (2013) Zadoff-Chu Matrix Transform Precoding-Based Orthogonal Frequency Division Multiple Access Uplink Systems: A Peak-to-Average Power Ratio Performance. Arabian Journal for Science and Engineering, 38 (3). pp. 613-620. ISSN 2193567X

Baig, I. and Jeoti, V. and Drieberg, M. (2013) On the PAPR Reduction in LTE-Advanced: Precoding-Based SLM-LOFDMA Uplink Systems. Arabian Journal for Science and Engineering, 38 (5). pp. 1075-1086. ISSN 2193567X

Bakhit, A. and Wong, P.W. (2013) Switchable microwave band-stop to all pass filter using stepped impedance resonator. Progress In Electromagnetics Research B (52). pp. 99-115. ISSN 19376472

Bakhsh, M. and Ahmad, I. and Iqbal, M.J. and Alelaiwi, A.A. (2013) An assessment of authentication and key management protocol of IEEE 802.16d (WIMAX) Wireless Mesh Networks. Information (Japan), 16 (5). pp. 3005-3012. ISSN 13434500

Batcha, M.F.M. and Nawi, M.A.M. and Sulaiman, S.A. and Raghavan, V.R. (2013) Numerical investigation of airflow in a swirling fluidized bed. Asian Journal of Scientific Research, 6 (2). pp. 157-166. ISSN 19921454

Ben-Awuah, J. and Adda, G.W. and Mijinyawa, A. and Andriamihaja, S. and Siddiqui, N. (2013) 2D Basin modelling and petroleum system analysis of the triassic play in the hammerfest basin of the norwegian barents sea. Research Journal of Applied Sciences, Engineering and Technology, 6 (17). pp. 3137-3150. ISSN 20407459

Bhaskoro, P.T. and Gilani, S.I.U.H. and Aris, M.S. (2013) Simulation of energy saving potential of a centralized HVAC system in an academic building using adaptive cooling technique. Energy Conversion and Management, 75. pp. 617-628. ISSN 01968904

Binti Hasan, N.A.S. and Balasubramanian, P. (2013) Exact solution for the kinetic equations of first order reversible reaction systems through flow graph theory approach. Industrial and Engineering Chemistry Research, 52 (31). pp. 10594-10600. ISSN 08885885

Boo Kean, K. and Ovinis, M. and Nagarajan, T. (2013) Thermal and magnetisms design of an inductor using finite element method. Advanced Materials Research, 622. pp. 130-135. ISSN 10226680

Bustam, M.A. and Man, Z. and Maitra, S. and Ishihara, T. (2013) Electrochemical Performance of Cathode LiVOPO4 Doped with Mo and W. Transactions of the Indian Ceramic Society, 72 (2). pp. 108-112. ISSN 0371750X

bin Ibrahim, M.F. and Ovinis, M. and bin Shehabuddeen, K. (2013) An underwater glider for subsea intervention: A technical feasibility study. Applied Mechanics and Materials, 393. pp. 561-566. ISSN 16609336

C

Chandio, I.A. and Matori, A.N.B. and WanYusof, K.B. and Talpur, M.A.H. and Balogun, A.-L. and Lawal, D.U. (2013) GIS-based analytic hierarchy process as a multicriteria decision analysis instrument: A review. Arabian Journal of Geosciences, 6 (8). pp. 3059-3066. ISSN 18667511

Chatterjee, K. and Dhara, P. and Ganguly, S. and Kargupta, K. and Banerjee, D. (2013) Morphology dependent ammonia sensing with 5-sulfosalicylic acid doped nanostructured polyaniline synthesized by several routes. Sensors and Actuators, B: Chemical, 181. pp. 544-550. ISSN 09254005

Chatterjee, K. and Mitra, M. and Kargupta, K. and Ganguly, S. and Banerjee, D. (2013) Synthesis, characterization and enhanced thermoelectric performance of structurally ordered cable-like novel polyaniline-bismuth telluride nanocomposite. Nanotechnology, 24 (21). ISSN 09574484

Chaudhuri, M. and Hui, C.X. (2013) Neem (Azadirachta indica) leaf powder: A plant-based adsorbent for removal of textile acid azo dye from aqueous solution. Nature Environment and Pollution Technology, 12 (2). pp. 199-202. ISSN 09726268

Chaudhuri, M. and Wahap, M.Z.B.A. and Affam, A.C. (2013) Treatment of aqueous solution of antibiotics amoxicillin and cloxacillin by modified photo-Fenton process. Desalination and Water Treatment, 51 (37-39). pp. 7255-7268. ISSN 19443994

Chaudhuri, M. and Zuhali, H. and Affam, A.C. (2013) Degradation of pesticide chlorothalonil by visible light-responsive photocatalyst ferrioxalate and H2O2 under solar irradiation. International Journal of Photoenergy, 2013. ISSN 1110662X

Chen, X. and Pao, W. and Li, X. (2013) Coupled thermo-hydro-mechanical model with consideration of thermal-osmosis based on modified mixture theory. International Journal of Engineering Science, 64. pp. 1-13. ISSN 00207225

Ching, D.L.C. and Abdul Aziz, Z. and Salah, F. (2013) Study of polarized wave with a hydrodynamic model and Fourier spectral method. Modelling and Simulation in Engineering, 2013. ISSN 16875591

Chong, S.K. and Dee, C.F. and Yahya, N. and Rahman, S.A. (2013) Control growth of silicon nanocolumns' epitaxy on silicon nanowires. Journal of Nanoparticle Research, 15 (4). ISSN 13880764

Choo, C.-S. and Shafiq, N. and Nuruddin, F.M. (2013) Effects of large openings in the shear zone of reinforced concrete beams. Malaysian Construction Research Journal, 13 (2). pp. 15-27. ISSN 19853807

Chun, L.K. and Jaafar, A. (2013) Ionic liquid as low dosage hydrate inhibitor for flow assurance in pipeline. Asian Journal of Scientific Research, 6 (2). pp. 374-380. ISSN 19921454

D

Daffalla, S.B. and Mukhtar, H. and Shaharun, M.S. (2013) Sorption of phenol from aqueous solutions using acid-treated rice husk. WIT Transactions on Ecology and the Environment, 179 VO. pp. 1177-1188. ISSN 17433541

Dakssa, L.M. and Harahap, I.S.H. (2013) The performance of the SPH method in simulating surface runoff along a saturated soil slope. International Journal of Safety and Security Engineering, 3 (2). pp. 77-87. ISSN 20419031

Dan-Mallam, Y. and Abdullah, M.Z. and Megat Yosuff, P.S. (2013) Impact strength, microstructure, and water absorption properties of kenaf/polyethylene terephthalate (PET) fiber-reinforced polyoxymethylene (POM) hybrid composites. Journal of Materials Research, 28 (16). pp. 2142-2146. ISSN 08842914

Dan-mallam, Y. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2013) Mechanical properties of knitted kenaf fiber reinforced polyoxymethylene (pom) laminate composite. Malaysian Journal of Microscopy, 9 (1). pp. 31-36. ISSN 18237010

Dass, S.C. (2013) Fingerprint-based recognition. International Statistical Review, 81 (2). pp. 175-187. ISSN 03067734

Dawotola, A.W. and Trafalis, T.B. and Mustaffa, Z. and Van Gelder, P.H.A.J.M. and Vrijling, J.K. (2013) Risk-based maintenance of a cross-country petroleum pipeline system. Journal of Pipeline Systems Engineering and Practice, 4 (3). pp. 141-148. ISSN 19491190

Demie, S. and Nuruddin, M.F. and Shafiq, N. (2013) Effects of micro-structure characteristics of interfacial transition zone on the compressive strength of self-compacting geopolymer concrete. Construction and Building Materials, 41. pp. 91-98. ISSN 09500618

Devi Wilfred, C. and Man, Z. and Phak Chan, Z. (2013) Predicting methods for sulfur removal from model oils using COSMO-RS and partition coefficient. Chemical Engineering Science, 102. pp. 373-377. ISSN 00092509

Dominic, P.D.D. and Ahmad, R. and Ab.Aziz, N. (2013) Trust-based partner identification method for e-supply chain (B2B) integrator-A case study of Malaysian construction industry. International Journal of Logistics Systems and Management, 14 (1). pp. 93-109. ISSN 17427967

Dominic, P.D.D. and Jati, H. and Hanim, S. (2013) University website quality comparison by using non-parametric statistical test: A case study from Malaysia. International Journal of Operational Research, 16 (3). pp. 349-374. ISSN 17457645

Dondi, G. and Pettinari, M. and Sangiorgi, C. and Zoorob, S.E. (2013) Traditional and Dissipated Energy approaches to compare the 2PB and 4PB flexural methodologies on a Warm Mix Asphalt. Construction and Building Materials, 47. pp. 833-839. ISSN 09500618

Drieberg, M. and Sahoo, N.C. (2013) On resonance and frequency response characteristics of electrical circuits. International Journal of Electrical Engineering and Education, 50 (4). pp. 368-383. ISSN 00207209

E

Elamvazuthi, I. and Muhd Zain, M.L.B. and Begam, K.M. (2013) Despeckling of ultrasound images of bone fracture using multiple filtering algorithms. Mathematical and Computer Modelling, 57 (1-2). pp. 152-168. ISSN 08957177

Elamvazuthi, I. and Vasant, P. and Ganesan, T. (2013) Hybrid Optimization Techniques for Optimization in a Fuzzy Environment. Intelligent Systems Reference Library, 38. pp. 1025-1046. ISSN 18684394

Elkhalifah, A.E.I. and Azmi Bustam, M. and Murugesan, T. (2013) Thermal properties of different transition metal forms of montmorillonite intercalated with mono-, di-, and triethanolammonium compounds. Journal of Thermal Analysis and Calorimetry, 112 (2). pp. 929-935. ISSN 13886150

Elkhalifah, A.E.I. and Maitra, S. and Bustam, M.A. and Murugesan, T. (2013) Effects of exchanged ammonium cations on structure characteristics and CO2 adsorption capacities of bentonite clay. Applied Clay Science, 83-84. pp. 391-398. ISSN 01691317

Elneel, R. and Anwar, S. and Ariwahjoedi, B. (2013) Prediction of heating values of oil palm fronds from ultimate analysis. Journal of Applied Sciences, 13 (3). pp. 491-496. ISSN 18125654

Elraies, K.A. (2013) The effect of a new in situ precipitation inhibitor on chemical EOR. Journal of Petroleum Exploration and Production Technology, 3 (2). pp. 133-137. ISSN 21900558

F

Farhana Mohamad, W. and Ahmad, F. and Ullah, S. (2013) Effect of inorganic fillers on thermal performance and char morphology of intumescent fire retardant coating. Asian Journal of Scientific Research, 6 (2). pp. 263-271. ISSN 19921454

Farooq, H. and Tang Jung, L. (2013) Energy, traffic load, and link quality aware ad hoc routing protocol for wireless sensor network based smart metering infrastructure. International Journal of Distributed Sensor Networks, 2013. ISSN 15501329

Farooq, M. and Ramli, A. and Subbarao, D. (2013) Biodiesel production from waste cooking oil using bifunctional heterogeneous solid catalysts. Journal of Cleaner Production, 59. pp. 131-140. ISSN 09596526

Farooq, M.U. and Xia, L. and Hussin, F.A. and Malik, A.S. (2013) Fault modeling of analog circuits using system identification automated model generation approaches from SPICE level descriptions. Advanced Science Letters, 19 (5). pp. 1276-1280. ISSN 19366612

Farooq, M.U. and Xia, L. and Hussin, F.A. and Malik, A.S. (2013) A novel algorithm for automated model generation of analog circuits using Chebyshev-newton interpolation. Advanced Science Letters, 19 (5). pp. 1520-1524. ISSN 19366612

Farooq, R. and Durrani, M. and Ahmed, Z. and Gilani, M.A. and Mahmood, Q. and Shaukat, S.F. and Chioma, N. and Farooq, M. and Yaquob, A. (2013) Treatment of tanneries waste water by ultrasound assisted electrolysis process. Journal of the Chemical Society of Pakistan, 35 (3). pp. 599-603. ISSN 02535106

Fatah, M.C. and Ismail, M.C. and Ari-Wahjoedi, B. (2013) Electrochemical behavior of X52 steel in a CO2 environment in the presence of acetate and sulfide. Journal of Materials Engineering and Performance, 22 (1). pp. 236-244. ISSN 10599495

Fatah, M.C. and Ismail, M.C. and Wahjoedi, B.A. (2013) Effects of sulphide ion on corrosion behaviour of X52 steel in simulated solution containing metabolic products species: A study pertaining to microbiologically influenced corrosion (MIC). Corrosion Engineering Science and Technology, 48 (3). pp. 211-220. ISSN 1478422X

Fatah, M.C. and Ismail, M.C. and Wahjoedi, B.A. (2013) Empirical equation of sulphate reducing bacteria (SRB) corrosion based on abiotic chemistry approach. Anti-Corrosion Methods and Materials, 60 (4). pp. 206-212. ISSN 00035599

Fathi, A. and Shafiq, N. and Nuruddin, M.F. and Elheber, A. (2013) Study the effectiveness of the different pozzolanic material on self-compacting concrete. ARPN Journal of Engineering and Applied Sciences, 8 (4). pp. 299-305. ISSN 18196608

Fawad, H. (2013) Heat transfer modeling of metal deposition employing welding heat source. Applied Mechanics and Materials, 315. pp. 463-467. ISSN 16609336

Firmansyah and Aziz, A.R.A. and Heikal, M.R. (2013) Double stage wiebe: An approach to single zone modeling of dual fuel HCCI combustion. Asian Journal of Scientific Research, 6 (2). pp. 388-394. ISSN 19921454

Foong, O.-M. and Lee, M. (2013) TextSumIt: A semantic single document summarization model on Android mobile device. Applied Mechanics and Materials, 263-26 (PART 1). pp. 1902-1909. ISSN 16609336

Foong, O.-M. and Rahim, S.B. (2013) Particle swarm inspired timetabling for ICT courses. Applied Mechanics and Materials, 263-26 (PART 1). pp. 2138-2145. ISSN 16609336

Foong, O.-M. and Sulaiman, S. and Ling, K.K. (2013) Text signage recognition in android mobile devices. Journal of Computer Science, 9 (12). pp. 1793-1802. ISSN 15493636

G

Ganesan, T. and Elamvazuthi, I. and Ku Shaari, K.Z. and Vasant, P. (2013) Swarm intelligence and gravitational search algorithm for multi-objective optimization of synthesis gas production. Applied Energy, 103. pp. 368-374. ISSN 03062619

Ganesan, T. and Elamvazuthi, I. and Shaari, K.Z.K. and Vasant, P. (2013) Hypervolume-Driven Analytical Programming for Solar-Powered Irrigation System Optimization. Advances in Intelligent Systems and Computing, 210. pp. 147-154. ISSN 21945357

Ganesan, T. and Elamvazuthi, I. and Shaari, K.Z.K. and Vasant, P. (2013) Multiobjective optimization of green sand mould system using chaotic differential evolution. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8160. pp. 145-163. ISSN 03029743

Ganesan, T. and Elamvazuthi, I. and Shaari, K.Z.K. and Vasant, P. (2013) An algorithmic framework for multiobjective optimization. The Scientific World Journal, 2013. ISSN 1537744X

Ganesan, T. and Vasant, P. and Elamvazuthi, I. (2013) Hybrid neuro-swarm optimization approach for design of distributed generation power systems. Neural Computing and Applications, 23 (1). pp. 105-117. ISSN 09410643

Ganesan, T. and Vasant, P. and Elamvazuthi, I. (2013) Normal-boundary intersection based parametric multi-objective optimization of green sand mould system. Journal of Manufacturing Systems, 32 (1). p. 197. ISSN 02786125

Ganguly, S. and Das, S. and Kargupta, K. and Banerjee, D. (2013) Reduced order inferential model-based optimization of a phosphoric acid fuel cell (PAFC) stack. Industrial and Engineering Chemistry Research, 52 (22). pp. 7104-7115. ISSN 08885885

Ganguly, S. and Sahoo, N.C. and Das, D. (2013) Multi-objective particle swarm optimization based on fuzzy-Pareto-dominance for possibilistic planning of electrical distribution systems incorporating distributed generation. Fuzzy Sets and Systems, 213. pp. 47-73. ISSN 01650114

Ganguly, S. and Sahoo, N.C. and Das, D. (2013) Recent advances on power distribution system planning: A state-of-the-art survey. Energy Systems, 4 (2). pp. 165-193. ISSN 18683967

Gasim, H.A. and Hashim, A.M. and Bakri, P.Z.M. and Samsuri, M.Z. and Rais, N.L.A. and Noor, N.D.M. (2013) Marine pollution at northeast of penang island. Research Journal of Applied Sciences, Engineering and Technology, 6 (8). pp. 1348-1353. ISSN 20407459

Gasim, H.A. and Kutty, S.R.M. and Isa, M.H. and Alemu, L.T. (2013) Optimization of anaerobic treatment of petroleum refinery wastewater using artificial neural networks. Research Journal of Applied Sciences, Engineering and Technology, 6 (11). pp. 2077-2082. ISSN 20407459

Getu, M. and Mahadzir, S. and Lee, M. (2013) Profit optimization for chemical process plant based on a probabilistic approach by incorporating material flow uncertainties. Computers and Chemical Engineering, 59. pp. 186-196. ISSN 00981354

Getu, M. and Mahadzir, S. and Long, N.V.D. and Lee, M. (2013) Techno-economic analysis of potential natural gas liquid (NGL) recovery processes under variations of feed compositions. Chemical Engineering Research and Design, 91 (7). pp. 1272-1283. ISSN 02638762

Ghayas, S. and Sulaiman, S. and Khan, M. and Jaafar, J. (2013) The effects of icon characteristics on users' perception. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 652-663. ISSN 03029743

Ghazali, Z. and Majid, M.A.M. and Shin, T. (2013) Replacement analysis for air compressors: A case of a petrochemical company in Malaysia. Asian Journal of Scientific Research, 6 (3). pp. 564-572. ISSN 19921454

Ghazanfar, B. and Awang, M. and Khan, S.R. and Fawad, H. (2013) Development of a new approach for incorporating tool tilting in friction stir welding. Advanced Materials Research, 701. pp. 378-381. ISSN 10226680

Ghosh, S.K. and Anwar Bég, O. and Narahari, M. (2013) A study of unsteady rotating hydromagnetic free and forced convection in a channel subject to forced oscillation under an oblique magnetic field. Journal of Applied Fluid Mechanics, 6 (2). pp. 213-227. ISSN 17353572

Ghulam, M. and Mohd, S.A. and Azmi, B.M. (2013) Solubility of carbon dioxide in aqueous solution of 2-amino-2- hydroxymethyl-1, 3-propanediol at elevated pressures. Research Journal of Chemistry and Environment, 17 (10). pp. 41-45. ISSN 09720626

Ghulam, M. and Mohd, S.A. and Azmi, B.M. and Faizan, A. (2013) Volumetric properties, viscosities and refractive indices of aqueous solutions of 2-Amino-2-methyl-1-propanol (AMP). Research Journal of Chemistry and Environment, 17 (9). pp. 22-31. ISSN 09720626

Ginta, T.L. and Amin, A.K.M.N. (2013) Thermally-assisted end milling of titanium alloy Ti-6Al-4V using induction heating. International Journal of Machining and Machinability of Materials, 14 (2). pp. 194-212. ISSN 17485711

Ginta, T.L. and Nurul Annn, A.K.M. (2013) Surface integrity in end milling titanium alloy Ti-6A1-4V under heat assisted machining. Asian Journal of Scientific Research, 6 (3). pp. 609-614. ISSN 19921454

Girard, H. (2013) French language option for English-speaking engineering students or the triple distance: Bilateral strategies in teaching-learning of linguistic contents L'option de langue Française pour étudiants ingénieurs anglophones ou la triple distance: Stratégies bilatérales dans l'enseignement-Apprentissage des contenus linguistiques. Ela, 168 (4). pp. 459-470. ISSN 0071190X

Git, H.M. and Seng, O.K. and Gilani, S.I.-H. and Aris, M.S.B. (2013) Preliminary study of thermoelectric system for simultaneous heating and cooling. Asian Journal of Scientific Research, 6 (3). pp. 528-536. ISSN 19921454

Gizaw, M. and Abdul Rani, A.M.B. and Yusof, Y. (2013) Turn-mill process plan and intelligence machining operations selection on STEP. Asian Journal of Scientific Research, 6 (2). pp. 346-352. ISSN 19921454

Goh, K.N. and Chen, Y.Y. and Arumugam, D. (2013) Road Accident Auto-dialer via Pressure Sensor. Communications in Computer and Information Science, 374 (PART I). pp. 308-312. ISSN 18650929

Goh, K.N. and Chen, Y.Y. and Daud, S.C. and Sivaji, A. and Soo, S.T. (2013) Designing a checklist for an e-commerce website using Kansei engineering. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 483-496. ISSN 03029743

Goh, K.N. and Manao, R.B.H. (2013) Assessing engineering drawings through automated assessment: Discussing mechanism to award marks. International Journal of Smart Home, 7 (4). pp. 327-336. ISSN 19754094

Goh, K.N. and Mohd. Shukri, S.R. and Manao, R.B.H. (2013) Automatic assessment for engineering drawing. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 497-507. ISSN 03029743

Gonfa, G. and Azmi Bustam, M. and Murugesan, T. and Man, Z. and Abdul Mutalib, M.I. (2013) Thiocyanate based task-specific ionic liquids for separation of benzene and cyclohexane. Chemical Engineering Transactions, 32. pp. 1939-1944. ISSN 22839216

Guangul, F.M. and Sulaiman, S.A. (2013) Mitigation of bridging problem in biomass gasification by a novel approach. Asian Journal of Scientific Research, 6 (2). pp. 331-338. ISSN 19921454

H

Habib, K. (2013) Performance study of waste heat driven pressurized adsorption chiller. Applied Mechanics and Materials, 315. pp. 380-384. ISSN 16609336

Habib, K. and Choudhury, B. and Chatterjee, P.K. and Saha, B.B. (2013) Study on a solar heat driven dual-mode adsorption chiller. Energy, 63. pp. 133-141. ISSN 03605442

Habib, K. and Saha, B.B. (2013) Performance evaluation of solar driven activated carbon fiber-ethanol based adsorption cooling system in malaysia. Asian Journal of Scientific Research, 6 (2). pp. 146-156. ISSN 19921454

Habib, K. and Saha, B.B. and Chakraborty, A. and Oh, S.T. and Koyama, S. (2013) Study on solar driven combined adsorption refrigeration cycles in tropical climate. Applied Thermal Engineering, 50 (2). pp. 1582-1589. ISSN 13594311

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2013) Combustion characteristics of direct-injection spark-ignition engine fuelled with producer gas. Energy Education Science and Technology Part A: Energy Science and Research, 31 (3). pp. 1683-1698. ISSN 1308772X

Hagos, F.Y. and Rashid, A. and Aziz, A. and Sulaiman, S.A. (2013) Study of syngas combustion parameters effect on internal combustion engine. Asian Journal of Scientific Research, 6 (2). pp. 187-196. ISSN 19921454

Hailegiorgis, S.M. and Mahadzir, S. and Subbarao, D. (2013) Parametric study and optimization of in situ transesterification of Jatropha curcas L assisted by benzyltrimethylammonium hydroxide as a phase transfer catalyst via response surface methodology. Biomass and Bioenergy, 49. pp. 63-73. ISSN 09619534

Hakimi, A. and Ellis, G.A. (2013) Equivalent circuit models for propagation analysis of in-building power line communications systems. Applied Computational Electromagnetics Society Journal, 28 (6). pp. 469-478. ISSN 10544887

Hamada, K.I. and Rahman, M.M. and Abdullah, M.A. and Bakar, R.A. and A. Aziz, A.R. (2013) Effect of mixture strength and injection timing on combustion characteristics of a direct injection hydrogen-fueled engine. International Journal of Hydrogen Energy, 38 (9). pp. 3793-3801. ISSN 03603199

Hamada, K.I. and Rahman, M.M. and Aziz, A.R.A. (2013) Parametric study of instantaneous heat transfer based on multidimensional model in direct-injection hydrogen-fueled engine. International Journal of Hydrogen Energy, 38 (28). pp. 12465-12480. ISSN 03603199

Hani, A.F.M. and Kumar, D. and Malik, A.S. and Razak, R. (2013) Physiological assessment of in vivo human knee articular cartilage using sodium MR imaging at 1.5T. Magnetic Resonance Imaging, 31 (7). pp. 1059-1067. ISSN 0730725X

Harimurti, S. and Rahmah, A.U. and Omar, A.A. and Thanapalan, M. (2013) Kinetics of methyldiethanolamine mineralization by using UV/H2O2 Process. Clean - Soil, Air, Water, 41 (12). pp. 1165-1174. ISSN 18630650

Harun, H.A. and Buyamin, N. and Othman, M.A. and Sulaiman, S.A. (2013) A case study on indoor comfort of lecture rooms in university buildings. Applied Mechanics and Materials, 393. pp. 821-826. ISSN 16609336

Hashim, A.M. and Catherine, S.M.P. and Takaijudin, H. (2013) Effectiveness of mangrove forests in surface wave attenuation: A review. Research Journal of Applied Sciences, Engineering and Technology, 5 (18). pp. 4483-4488. ISSN 20407459

Hashim, A.S. and Ahmad, W.F.W. and Jaafar, A. and Md Nordin, S. (2013) A Proposed mobile school system for requirements of secondary schools in Malaysia. Journal of Software, 8 (12). pp. 3229-3237. ISSN 1796217X

Hashim, R. and Fitri, A. and Motamedi, S. and Hashim, A.M. (2013) Modelling of coastal hydrodymics associated with coastal structures: A review. Malaysian Journal of Science, 32 (SPEC. ). pp. 149-154. ISSN 13943065

Hassan, M.H.A. and Sim, Y.B. and Peng, L.C. and Abdul Rahman, A.H. (2013) Facies analysis of the uppermost Kubang Pasu Formation, Perlis: A wave-and storm-influenced coastal depositional system. Sains Malaysiana, 42 (8). pp. 1091-1100. ISSN 01266039

Hassan, S. and Kee, L.S. and Al-Kayiem, H.H. (2013) Experimental study of palm oil mill effluent and oil palm frond waste mixture as an alternative biomass fuel. Journal of Engineering Science and Technology, 8 (6). pp. 703-712. ISSN 18234690

Hassanpour, A. and Pasha, M. and Susana, L. and Rahmanian, N. and Santomaso, A.C. and Ghadiri, M. (2013) Analysis of seeded granulation in high shear granulators by discrete element method. Powder Technology, 238. pp. 50-55. ISSN 00325910

Haza, Z.F. and Harahap, I.S.H. and Dakssa, L.M. (2013) Experimental studies of the flow-front and drag forces exerted by subaqueous mudflow on inclined base. Natural Hazards, 68 (2). pp. 587-611. ISSN 0921030X

Helwani, Z. and Aziz, N. and Bakar, M.Z.A. and Mukhtar, H. and Kim, J. and Othman, M.R. (2013) Conversion of Jatropha curcas oil into biodiesel using re-crystallized hydrotalcite. Energy Conversion and Management, 73. pp. 128-134. ISSN 01968904

Heng, G.C. and Soliman, E. and Chaudhuri, M. (2013) Combined uv/fenton and sbr treatment of a semi-aerobic landfill leachate. Sains Malaysiana, 42 (7). pp. 893-902. ISSN 01266039

Hilmee, M.I. and Chandra, M.S. and Karuppanan, S. and Fadhil, H.A.M. and Lias, M.R. (2013) Effects of different granular viscosity models on the bubbling fluidized bed - A numerical approach. Applied Mechanics and Materials, 393. pp. 857-862. ISSN 16609336

Hong, S.S.B. and Ibrahim, R. and Khir, M.H.M. and Zakariya, M.A. and Daud, H. (2013) Wi-Fi energy harvester for low power RFID application. Progress In Electromagnetics Research C, 40. pp. 69-81. ISSN 19378718

Hossain, M.I. and El-Harbawi, M. and Alitheen, N.B.M. and Noaman, Y.A. and Lév�que, J.-M. and Yin, C.-Y. (2013) Synthesis and anti-microbial potencies of 1-(2-hydroxyethyl)-3-alkylimidazolium chloride ionic liquids: Microbial viabilities at different ionic liquids concentrations. Ecotoxicology and Environmental Safety, 87. pp. 65-69. ISSN 01476513

Humayun, J. and Malik, A.S. and Kamel, N. and Yap, F.B.B. (2013) Segmentation of acne vulgaris lesion based on spectral models of RGB pixels. Advanced Science Letters, 19 (5). pp. 1463-1466. ISSN 19366612

Hussain, A. and Ahmed, I. and Sait, H.H. and Bassyouni, M.I. and Hegab, A.M. and Ul Hasan, S.W. and Nasir Ani, F. (2013) Experimental and simulation study of fluidization behavior of palm biomass in a circulating fluidized bed riser. Industrial and Engineering Chemistry Research, 52 (49). pp. 17529-17537. ISSN 08885885

Hussain, P. and Bhagat, R. and Dashwood, R. (2013) Precursor preparation for Ti-Al-V-Y alloy via FFC cambridge process. Applied Mechanics and Materials, 330. pp. 62-67. ISSN 16609336

Hussin, F.A. and Osman, Z.E.M. and Xia, L. and Ali, N.B.Z. (2013) Optimization of processor architecture for sobel real-time edge detection using FPGA. International Review on Computers and Software, 8 (4). pp. 970-982. ISSN 18286003

Hussin, H. and Hashim, F.M. and Ramli, O.H. and Ghazali, S.M.A. (2013) Maintainability analysis of an offshore gas compression train system, a case study. International Journal of Quality and Reliability Management, 30 (5). pp. 495-510. ISSN 0265671X

Hyland, P.B. and Mun, S.L.-S. and Mahadevan, R. (2013) Prediction of weak acid toxicity in saccharomyces cerevisiae using genome-scale metabolic models. Industrial Biotechnology, 9 (4). pp. 229-235. ISSN 15509087

I

Ibrahim, I. and Adli, R.N.F.R. (2013) Modeling and simulation of vortex induced vibration on the gas transporting GRP pipeline riser. Asian Journal of Scientific Research, 6 (2). pp. 281-289. ISSN 19921454

Ilyas, S.U. and Pendyala, R. and Marneni, N. (2013) Settling characteristics of alumina nanoparticles in ethanol-water mixtures. Applied Mechanics and Materials, 372. pp. 143-148. ISSN 16609336

Imran, M. and Said, A.M. and Younis, M. and Hasbullah, H. (2013) Application-centric recovery algorithm for wireless sensor and actor networks. International Journal of Communication Networks and Distributed Systems, 10 (4). pp. 379-401. ISSN 17543916

Isa, M.A. and Eldemerdash, U. and Nasrifar, K. (2013) Evaluation of potassium formate as a potential modifier of TEG for high performance natural gas dehydration process. Chemical Engineering Research and Design, 91 (9). pp. 1731-1738. ISSN 02638762

Ishak, S. and Malakahmad, A. (2013) Optimization of Fenton process for refinery wastewater biodegradability augmentation. Korean Journal of Chemical Engineering, 30 (5). pp. 1083-1090. ISSN 02561115

Ismaila, M. and Ismail, I. and Yahaya, N.Z. (2013) A Comparative Study of SPWM on A 5-Level H-NPC Inverter. Research Journal of Applied Sciences, Engineering and Technology, 6 (12). pp. 2277-2282. ISSN 20407459

Izza Arshad, N. and Mohamed Ariff, M.I. (2013) Electronic content management systems use and implementation in highly integrated businesses. World Applied Sciences Journal, 28 (12). pp. 2221-2228. ISSN 18184952

J

Jadid Abdulkadir, S. and Yong, S.-P. (2013) Unscented Kalman filter for noisy multivariate financial time-series data. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8271 L. pp. 87-96. ISSN 03029743

Jamil, F. and Ahmad, M.M. and Yusup, S. (2013) Comparative study for catalytic cracking of model bio-oil and palm kernel shell derived bio-oil. Advanced Materials Research, 781-78. pp. 2476-2479. ISSN 10226680

Jaradat, A. and Patel, A. and Zakaria, M.N. and Amina, M.A.H. (2013) Accessibility algorithm based on site availability to enhance replica selection in a data grid environment. Computer Science and Information Systems, 10 (1). pp. 105-132. ISSN 18200214

Jatoi, M.A. (2013) Forward error correction using Reed-Solomon coding and Euclid decoding in wireless infrared communications. International Journal on Communications Antenna and Propagation, 3 (2). pp. 97-101. ISSN 20395086

Javed, A. and Chai, W.Y. and Kulathuramaiyer, N. and Javed, M.S. and Alenezi, A.R. (2013) Automated segmentation of brain MR images by combining Contourlet Transform and K-means Clustering techniques. Journal of Theoretical and Applied Information Technology, 54 (1). pp. 82-91. ISSN 19928645

Javed, E. and Faye, I. and Malik, A.S. (2013) Reduction of Ballistocardiogram artifact using EMD-AF. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8228 L (PART 3). pp. 533-540. ISSN 03029743

Jiménez, F. and Sánchez, G. and Vasant, P. (2013) A multi-objective evolutionary approach for fuzzy optimization in production planning. Journal of Intelligent and Fuzzy Systems, 25 (2). pp. 441-455. ISSN 10641246

Johl, S.K. and Kaur Johl, S. and Subramaniam, N. and Cooper, B. (2013) Internal audit function, board quality and financial reporting quality: Evidence from Malaysia. Managerial Auditing Journal, 28 (9). pp. 780-814. ISSN 02686902

Joseph, N.P.S. and Mahmood, A.K. and Choo, P.Y. and Wong, S.W. and Phan, K.Y. and Lim, E.H. (2013) Battles in volatile information and communication technology landscape: The Malaysia small and medium enterprise case. International Journal of Business Information Systems, 13 (2). pp. 217-234. ISSN 17460972

Juoi, J.M. and Arudra, D. and Rosli, Z.M. and Hussain, K. and Japper Jaafar, A. (2013) Microstructural properties of glass composite material made from incinerated scheduled waste slag and soda lime silicate (SLS) waste glass. Journal of Non-Crystalline Solids, 367 (1). pp. 8-13. ISSN 00223093

Juoi, J.M. and Arudra, D. and Rosli, Z.M. and Rahim, T.A. and Shamsuri, S.R. and Azuraien, J.J. (2013) Physical and mechanical properties of glass composite material made from incinerated scheduled waste slag and sls waste glass. Advanced Materials Research, 626. pp. 280-288. ISSN 10226680

K

Kadhim, K.A. and Habeeb, L.S. and Sapar, A.A. and Hussin, Z. and Abdullah, M.M.R.T.L. (2013) An evaluation of online machine translation of arabic into english news headlines: Implications on students' learning purposes. Turkish Online Journal of Educational Technology, 12 (2). pp. 39-50. ISSN 13036521

Kadry, H. and Zakaria, N. and Cheong, L.Y. and Abdel-Aty, M. (2013) Dynamical properties of multi-photon interaction between a cavity field and a single-qubit. International Journal of Quantum Information, 11 (4). ISSN 02197499

Kakooei, S. and Ismail, M.C. and Wahjoedi, B.A. (2013) Electrochemical study of iridium oxide coating on stainless steel substrate. International Journal of Electrochemical Science, 8 (3). pp. 3290-3301. ISSN 14523981

Kamil, R.N.M. and Yusup, S. and Ismail, L. (2013) Application of taguchi method for optimization of polyol ester production by esterification of neopentyl glycol with hexanoic acid. Asian Journal of Chemistry, 25 (15). pp. 8256-8260. ISSN 09707077

Karim, S.A.A. (2013) Extension quintic wang-ball curves and surfaces. Far East Journal of Mathematical Sciences, 75 (SPL.IS). pp. 185-201. ISSN 09720871

Karim, S.A.A. (2013) Rational cubic Ball functions for positivity preserving. Far East Journal of Mathematical Sciences, 82 (2). pp. 193-207. ISSN 09720871

Karim, S.A.A. and Ismail, M.T. and Hasan, M.K. and Sulaiman, J. (2013) Denoising the temperature data using wavelet transform. Applied Mathematical Sciences, 7 (117-12). pp. 5821-5830. ISSN 1312885X

Karuppanan, S. and Hashim, M.H. and Wahab, A.A. (2013) Finite element simulation of residual stresses in cold-expanded plate. Asian Journal of Scientific Research, 6 (3). pp. 518-527. ISSN 19921454

Kausar, N. and Samir, B.B. and Ahmad, I. and Hussain, M. (2013) Survey of classification techniques in intrusion detection system for determining optimized solution. Information (Japan), 16 (5). pp. 2987-2994. ISSN 13434500

Khairy, H. and Harith, Z.T. (2013) Evaluation of pore geometry and saturation degree influence to electrical resistivity dispersion: A potential application to extract porosity. Petroleum Science and Technology, 31 (5). pp. 516-529. ISSN 10916466

Khalid, S. and Wen, W.P. and Cheong, L.Y. (2013) A novel synthesis procedure for ultra wideband (UWB) bandpass Filters. Progress in Electromagnetics Research, 141. pp. 249-266. ISSN 10704698

Khalil, H.P.S.A. and Aprilia, N.A.S. and Bhat, A.H. and Jawaid, M. and Paridah, M.T. and Rudi, D. (2013) A Jatropha biomass as renewable materials for biocomposites and its applications. Renewable and Sustainable Energy Reviews, 22. pp. 667-685. ISSN 13640321

Khalil, H.P.S.A. and Tehrani, M.A. and Davoudpour, Y. and Bhat, A.H. and Jawaid, M. and Hassan, A. (2013) Natural fiber reinforced poly(vinyl chloride) composites: A review. Journal of Reinforced Plastics and Composites, 32 (5). pp. 330-356. ISSN 07316844

Khan, A.A. and Basri, S. and Dominic, P.D.D. and Amin, F.E. (2013) Communication risks and best practices in global software development during requirements change management: A systematic literature review protocol. Research Journal of Applied Sciences, Engineering and Technology, 6 (19). pp. 3514-3519. ISSN 20407459

Khan, A.A.A. and Abdullah, M.A. (2013) Bismuth-modified hydroxyapatite carbon electrode for simultaneous in-situ cadmium and lead analysis. International Journal of Electrochemical Science, 8 (1). pp. 195-203. ISSN 14523981

Khan, J.A. and Pao, K.S. (2013) Fill removal with foam in horizontal well cleaning in coiled tubing. Research Journal of Applied Sciences, Engineering and Technology, 6 (14). pp. 2655-2661. ISSN 20407459

Khan, K. and Baharudin, B.B. and Khan, A. (2013) Mining opinion targets from text documents: A review. Journal of Emerging Technologies in Web Intelligence, 5 (4). pp. 343-353. ISSN 17980461

Khan, M.A. and Hasbullah, H. and Nazir, B. and Qureshi, I.A. and Pirzada, N. (2013) Simultaneously Node Relocation Algorithm for Mobile Sensor Network. Communications in Computer and Information Science, 366 CC. pp. 85-95. ISSN 18650929

Khan, M.F. and Malik, A.S. and Xia, L. and Wang, J.-L. and Nikkhoo, M. and Parnianpour, M. and Khan, M.I. (2013) Investigation of low back pain using system modeling. Advanced Science Letters, 19 (5). pp. 1260-1264. ISSN 19366612

Khan, W.Z. and Aalsalem, M.Y. and Saad, M.N.B.M. and Xiang, Y. (2013) Detection and mitigation of node replication attacks in wireless sensor networks: A survey. International Journal of Distributed Sensor Networks, 2013. ISSN 15501329

Khan, W.Z. and Saad, M.N.B.M. and Aalsalem, M.Y. (2013) Scrutinising well-known countermeasures against clone node attack in mobile wireless sensor networks. International Journal of Grid and Utility Computing, 4 (2-3). pp. 119-127. ISSN 1741847X

Khoo, B.K. and Ovinis, M. and Nagarajan, T. (2013) A comparative analysis of inductors with square and conical contours. Applied Mechanics and Materials, 415. pp. 414-417. ISSN 16609336

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2013) Dynamic responses of truss spar due to wave actions. Research Journal of Applied Sciences, Engineering and Technology, 5 (3). pp. 812-818. ISSN 20407459

Kurian, V.J. and Nizamani, Z. and Liew, M.S. (2013) Modelling for uncertainties in resistance for jacket platforms in Malaysia. Research Journal of Applied Sciences, Engineering and Technology, 5 (3). pp. 750-759. ISSN 20407459

Kurian, V.J. and Yassir, M.A. and Ng, C.Y. and Harahap, I.S. (2013) Nonlinear dynamic analysis of multi-component mooring lines incorporating line-seabed interaction. Research Journal of Applied Sciences, Engineering and Technology, 6 (8). pp. 1428-1445. ISSN 20407459

Kurnia, K.A. and Mutalib, M.I.A. and Man, Z. and Bustam, M.A. (2013) Selection of ILs for separation of benzene from n-hexane using COSMO-RS. A quantum chemical approach. Key Engineering Materials, 553. pp. 35-40. ISSN 10139826

L

Lawal, I.A. and Md Said, A. and Mu'azu, A.A. (2013) Simulation model to improve QoS performance over fixed WiMAX using OPNET. Research Journal of Applied Sciences, Engineering and Technology, 6 (21). pp. 3933-3945. ISSN 20407459

Le Dinh, L. and Vo Ngoc, D. and Vasant, P. (2013) Artificial bee colony algorithm for solving optimal power flow problem. The Scientific World Journal, 2013. ISSN 1537744X

Lee, K. and Weis, M. and Taguchi, D. and Manaka, T. and Iwamoto, M. (2013) Coupling between transport and injection properties of pentacene field-effect transistors with different morphologies. Japanese Journal of Applied Physics, 52 (8). ISSN 00214922

Lee, S.-P. and Ramli, A. (2013) Methyl oleate deoxygenation for production of diesel fuel aliphatic hydrocarbons over Pd/SBA-15 catalysts. Chemistry Central Journal, 7 (1). ISSN 1752153X

Lefebvre, B. and Sumrall, C.D. and Shroat-Lewis, R.A. and Reich, M. and Webster, G.D. and Hunter, A.W. and Nardin, E. and Rozhnov, S.V. and Guensburg, T.E. and Touzeau, A. and Noailles, F. and Sprinkle, J. (2013) Palaeobiogeography of Ordovician echinoderms. Geological Society Memoir, 38 (1). pp. 173-198. ISSN 04354052

Li, S. and Pham, C. and Jaekel, A. and Matin, M.A. and Amin, A.H.M. and Li, Y. (2013) Perception, reaction, and cognition in wireless sensor networks. International Journal of Distributed Sensor Networks, 2013. ISSN 15501329

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. (2013) A numerical FEM solution of gear root stress in offset axial mesh misalignment. Applied Mechanics and Materials, 393. pp. 375-380. ISSN 16609336

M

MacHmudah, A. and Parman, S. and Zainuddin, A. and Chacko, S. (2013) Polynomial joint angle arm robot motion planning in complex geometrical obstacles. Applied Soft Computing Journal, 13 (2). pp. 1099-1109. ISSN 15684946

Machmudah, A. and Parman, S. (2013) Feasible Joint Angle Continuous Function of Robotics Arm in Obstacles Environment Using Particle Swarm Optimization. Intelligent Systems Reference Library, 38. pp. 1047-1071. ISSN 18684394

Mahamad, S. and Rashid, F.A.A. and Ibrahim, M.N. and Kasbon, R. (2013) Mobile English learning system: A conceptual framework for Malaysian primary school. Lecture Notes in Electrical Engineering, 152 LN. pp. 189-197. ISSN 18761100

Maharun, M. and Baharom, M.B. and Mohd, M.S. (2013) Modelling and control of 4wd parallel split hybrid electric vehicle converted from a conventional vehicle. World Journal of Modelling and Simulation, 9 (1). pp. 47-58. ISSN 17467233

Mahgoub, B.K.M. and Sulaiman, S.A. and Abdul Karim, Z.A. (2013) Performance of a compression ignition engine fuelled by diesel and imitated syngas. Asian Journal of Scientific Research, 6 (3). pp. 456-466. ISSN 19921454

Mahmood, S. and Burhanudin, Z.A. and Hamid, N.H. (2013) Field emission model of cnt based ionization gas sensor. Advanced Materials Research, 667. pp. 135-143. ISSN 10226680

Mahmood, S. and Burhanudin, Z.A. and Salman, A. (2013) Field emission model of carbon nanotubes to simulate gas breakdown in ionization gas sensor. Journal of Applied Physics, 113 (2). ISSN 00218979

Mahmoud, A. and Shuhaimi, M. (2013) Systematic methodology for optimal enterprise network design between Bio-Refinery and petroleum refinery for the production oftransportation fuels. Energy, 59. pp. 224-232. ISSN 03605442

Majid, M.A.A. and Sulaiman, S.A. and Mokhtar, H. and Tamiru, A.L. (2013) Operating point estimation for an absorption process using data clustering technique. Journal of Applied Sciences, 13 (3). pp. 377-384. ISSN 18125654

Majid, M.A.A. and Zainuddin, A. and Tamiru, A.L. (2013) Historical data based models for chilled water production from waste heat of turbine. Journal of Applied Sciences, 13 (2). pp. 301-307. ISSN 18125654

Majid, S.A. and Azmarini, A.N. and Sulaiman, S.A. (2013) Study on indoor air quality of a small office in a tropical country. Applied Mechanics and Materials, 393. pp. 827-831. ISSN 16609336

Malakahmad, A. and Basri, N.E.A. and Zain, S.M. (2013) Study on performance and characteristic of microorganisms in a waste-to-energy system. Advanced Materials Research, 626. pp. 625-630. ISSN 10226680

Malakahmad, A. and Chuan, S.Y. (2013) Application of response surface methodology to optimize coagulation-flocculation treatment of anaerobically digested palm oil mill effluent using alum. Desalination and Water Treatment, 51 (34-36). pp. 6729-6735. ISSN 19443994

Malakahmad, A. and Nasrudin, S. and Ahmad Basri, N.E. and Md Zain, S. (2013) Anaerobic transformation of biodegradable waste; Simultaneous production of energy and fertilizer. American Journal of Environmental Sciences, 9 (2). pp. 113-119. ISSN 1553345X

Maleki-Ghaleh, H. and Rekabeslami, M. and Shakeri, M.S. and Siadati, M.H. and Javidi, M. and Talebian, S.H. and Aghajani, H. (2013) Nano-structured yttria-stabilized zirconia coating by electrophoretic deposition. Applied Surface Science, 280. pp. 666-672. ISSN 01694332

Malik, A.S. and Humayun, J. (2013) Parallelization of discrete cosine transform in shape from focus. Advanced Science Letters, 19 (5). pp. 1459-1462. ISSN 19366612

Malik, F. and Baharudin, B. (2013) The statistical quantized histogram texture features analysis for image retrieval based on median and laplacian filters in the DCT domain. International Arab Journal of Information Technology, 10 (6). ISSN 16833198

Malik, M.S.A. and Sulaiman, S. (2013) Analytical comparison of factors affecting EHR visualization for physicians in public health care units. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 605-614. ISSN 03029743

Malik, M.S.A. and Sulaiman, S. and Malik, M.F.A. (2013) Relational factors of EHR database in visual analytic systems for public health care units. Communications in Computer and Information Science, 414. pp. 161-172. ISSN 18650929

Man, Z. and Elsheikh, Y.A. and Bustam, M.A. and Yusup, S. and Mutalib, M.I.A. and Muhammad, N. (2013) A Brønsted ammonium ionic liquid-KOH two-stage catalyst for biodiesel synthesis from crude palm oil. Industrial Crops and Products, 41 (1). pp. 144-149. ISSN 09266690

Mannan, H.A. and Mukhtar, H. and Murugesan, T. and Nasir, R. and Mohshim, D.F. and Mushtaq, A. (2013) Recent applications of polymer blends in gas separation membranes. Chemical Engineering and Technology, 36 (11). pp. 1838-1846. ISSN 09307516

Maoinser, M.A.B. and Ahmad, F. and Mohd Junaidi, M.H.B. (2013) The study of tensile failure on thin plate hybrid composites with drilled holes. Asian Journal of Scientific Research, 6 (3). pp. 621-625. ISSN 19921454

Mark, J.O. and Samir, B.B. and Saad, N.M. (2013) Capacity and error probability performance analysis for MIMO MC DS-CDMA system in η-μ Fading environment. AEU - International Journal of Electronics and Communications, 67 (4). pp. 269-281. ISSN 14348411

Mat-Shayuti, M.S. and Abdullah, M.Z. and Megat-Yusoff, P.S.M. (2013) Water absorption properties and morphology of polypropylene/polycarbonate/polypropylene-graft-maleic anhydride blends. Asian Journal of Scientific Research, 6 (2). pp. 167-176. ISSN 19921454

Matayong, S. and Mahmood, A.K. (2013) The review of approaches to knowledge management system studies. Journal of Knowledge Management, 17 (3). pp. 472-490. ISSN 13673270

Maurer, F. and Van Buchem, F.S.P. and Eberli, G.P. and Pierson, B.J. and Raven, M.J. and Larsen, P.-H. and Al-Husseini, M.I. and Vincent, B. (2013) Late Aptian long-lived glacio-eustatic lowstand recorded on the Arabian Plate. Terra Nova, 25 (2). pp. 87-94. ISSN 09544879

May, Z. and Basiran, K.S. (2013) Development of a portable fingerprint attendance system for university student. Advanced Materials Research, 660. pp. 230-235. ISSN 10226680

May, Z. and Hashim, H.H.M. (2013) Greenhouse remote control and monitoring system. Applied Mechanics and Materials, 295-29. pp. 940-944. ISSN 16609336

May, Z.B. and Mohd Yaseen, Y.A.A.B. (2013) Smart energy saving classroom system using programmable logic controller. Advanced Materials Research, 660. pp. 158-162. ISSN 10226680

Md. Said, A. (2013) Vector-projection approach to curve framing for extruded surfaces. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7971 L (PART 1). pp. 596-607. ISSN 03029743

Memon, F.A. and Nuruddin, M.F. and Khan, S. and Shafiq, N. and Ayub, T. (2013) Effect of sodium hydroxide concentration on fresh properties and compressive strength of self-compacting geopolymer concrete. Journal of Engineering Science and Technology, 8 (1). pp. 44-56. ISSN 18234690

Memon, F.A. and Nuruddin, M.F. and Shafiq, N. (2013) Effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete. International Journal of Minerals, Metallurgy and Materials, 20 (2). pp. 205-213. ISSN 16744799

Memon, K.R. and Shuker, M.T. and Tunio, S.Q. and Lashari, A.A. and Abbass, G. (2013) Investigating rheological properties of high performance cement system for Oil wells. Research Journal of Applied Sciences, Engineering and Technology, 6 (20). pp. 3865-3870. ISSN 20407459

Mijinyawa, A. and Bhattacharya, S.K. and Moumouni, A. and Mijinyawa, S. and Mohammad, I. (2013) Hydrocarbon potentials, thermal and burial history in Herwa-1 well from the Nigerian sector of the chad basin: An implication of 1-d basin modeling study. Research Journal of Applied Sciences, Engineering and Technology, 6 (6). pp. 961-968. ISSN 20407459

Minh, V.T. (2013) Stability for switched dynamic hybrid systems. Mathematical and Computer Modelling, 57 (1-2). pp. 78-83. ISSN 08957177

Mitra, M. and Chatterjee, K. and Kargupta, K. and Ganguly, S. and Banerjee, D. (2013) Reduction of graphene oxide through a green and metal-free approach using formic acid. Diamond and Related Materials, 37. pp. 74-79. ISSN 09259635

Moayedi, F. and Zakaria, R. and Bigah, Y. and Mustafar, M. and Puan, O.C. and Zin, I.S. and Klufallah, M.M.A. (2013) Conceptualising the indicators of walkability for sustainable transportation. Jurnal Teknologi (Sciences and Engineering), 65 (3). pp. 85-90. ISSN 01279696

Moghadam, R.A. and Yusup, S. and Lam, H.L. and Shoaibi, A.A. and Ahmad, M.M. (2013) Hydrogen production from mixture of biomass and polyethylene waste in fluidized bed catalytic steam co-gasification process. Chemical Engineering Transactions, 35. pp. 565-570. ISSN 22839216

Mohamed, N.M. and Zaine, S.N.A. (2013) Performance of TiO2 aggregates-based dye solar cells. Materials Science Forum, 737. pp. 137-144. ISSN 02555476

Mohamed Saheed, M.S. and Mohamed, N.M. and Burhanudin, Z.A. (2013) Optimization of the production of aligned CNTs array as the gas sensing element. Materials Science Forum, 756. pp. 156-163. ISSN 02555476

Mohammadpour, E. and Awang, M. (2013) Non-linear multi-scale finite element method for prediction of tensile behaviour of carbon nanotube-reinforced polymer composites Nelinearna, višeskalna metoda kona�nih elemenata za predvidanje vla�nog ponašanja polimernih kompozita oja�anih uglji�nim nanocijevima. International Journal for Engineering Modelling, 26 (1-4). pp. 59-64. ISSN 13301365

Mohammed, B.S. and Ean, L.W. and Malek, M.A. (2013) One way RC wall panels with openings strengthened with CFRP. Construction and Building Materials, 40. pp. 575-583. ISSN 09500618

Mohammed, B.S. and Foo, W.L. and Hossain, K.M.A. and Abdullahi, M. (2013) Shear strength of palm oil clinker concrete beams. Materials and Design, 46. pp. 270-276. ISSN 02641275

Mohammed, B.S. and Ibrahim, R. and Ram Rao, S. and Perumal, N. (2013) Performance evaluation of R-UPQC and L-UPQC based on a novel voltage imperfections detection algorithm. International Review of Electrical Engineering, 8 (4). pp. 1311-1323. ISSN 18276660

Mohammed, B.S. and Woen, E.L. and Malek, M.A. and Sing, W.L. and Abbas, N.A. and Yusop, H. and Muda, R.S. and Hashim, M. and Yong, U. (2013) Development of sediment brick utilizing reservoir sediment and fly ash. Applied Mechanics and Materials, 420. pp. 276-280. ISSN 16609336

Mohd Azlan, M.A. and Abdul Latif, M.R. and Abdullah, M.Z. and Zainal Abidin, K.A. and Abdul Wahab, A. (2013) Flow behavior in the resin infusion of glass fiber reinforced polymer wind turbine blade. Advanced Materials Research, 686. pp. 118-124. ISSN 10226680

Mohd Ibrahim, S. and Masrom, A.K. and Mazinani, B. and Radiman, S. and Md Jamil, F. and Beitollahi, A. and Negishi, N. and Yahya, N. (2013) Mesoporous titania photocatalyst: Effect of relative humidity and aging on the preparation of mesoporous titania and on its photocatalytic activity performance. Research on Chemical Intermediates, 39 (3). pp. 1003-1014. ISSN 09226168

Mohd Zulkefli, N.A. and Duong, H.T. and Baharudin, B. (2013) A case study on trust-based automated blog recommendation making. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7803 L (PART 2). pp. 489-498. ISSN 03029743

Mohshim, D.F. and Mukhtar, H.B. and Man, Z. and Nasir, R. (2013) Latest Development on Membrane Fabrication for Natural Gas Purification: A Review. Journal of Engineering (United Kingdom), 2013. ISSN 23144904

Mohyaldin, M.E. and Elkhatib, N. and Ismail, M.C. (2013) Extension of NORSOK CO2 corrosion prediction model for elbow geometry. International Journal of Computer Aided Engineering and Technology, 5 (1). pp. 99-112. ISSN 17572657

Mokhtar, M.F. and Latib, E.H.A. and Sufian, S. and Shaari, K.Z.K. (2013) Preparation of activated carbon from durian shell and seed. Advanced Materials Research, 626. pp. 887-891. ISSN 10226680

Mokhtar, M.R.M. and Matori, A.N. and Yusof, H.K.H.W. and Chandio, I.A. and Viet, D.T. and Lawal, D.U. (2013) A study of unmanned aerial vehicle photogrammetry for environment mapping: Preliminary observation. Advanced Materials Research, 626. pp. 440-444. ISSN 10226680

Moni, M.N.Z. and Sulaiman, S.A. (2013) Downdraft gasification of oil palm frond: Effects of temperature and operation time. Asian Journal of Scientific Research, 6 (2). pp. 197-206. ISSN 19921454

Moniruzzaman, M. and Ono, T. (2013) Separation and characterization of cellulose fibers from cypress wood treated with ionic liquid prior to laccase treatment. Bioresource Technology, 127. pp. 132-137. ISSN 09608524

Moradi, B. and Awang, M.B. (2013) Heat transfer in the formation. Research Journal of Applied Sciences, Engineering and Technology, 6 (21). pp. 3927-3932. ISSN 20407459

Mu'azu, A.A. and Amin, A.H.M. and Hasbullah, H. and Lawal, I.A. and Fageeri, S.O. (2013) A framework for providing optimal QoS routing information in vehicular ad hoc network. Research Journal of Applied Sciences, Engineering and Technology, 5 (6). pp. 1899-1905. ISSN 20407459

Muhammad, A. and Rahmanian, N. and Pendyala, R. (2013) Flow analysis of melted urea in a perforated rotating bucket. Applied Mechanics and Materials, 372. pp. 340-345. ISSN 16609336

Muhammad, N. and Man, Z. and Bustam, M.A. and Mutalib, M.I.A. and Rafiq, S. (2013) Investigations of novel nitrile-based ionic liquids as pre-treatment solvent for extraction of lignin from bamboo biomass. Journal of Industrial and Engineering Chemistry, 19 (1). pp. 207-214. ISSN 1226086X

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2013) Fabrication and microstructural analysis of CNTs reinforced copper matrix nanocomposites via MIM technique. Applied Mechanics and Materials, 459. pp. 11-17. ISSN 16609336

Murugesan, R. and Dominic, P.D.D. (2013) Influencing entrepreneurial intentions: The role of attitudes and personality constructs. International Journal of Business Excellence, 6 (6). pp. 687-701. ISSN 17560047

Mushtaq, M. and Tan, I.M. and Nadeem, M. and Devi, C. and Lee, S.Y.C. and Sagir, M. and Rashid, U. (2013) Epoxidation of methyl esters derived from Jatropha oil: An optimization study. Grasas y Aceites, 64 (1). pp. 103-114. ISSN 00173495

Mussa, M.A. and Dominic, P.D.D. and Downe, A.G. and Loke, S.-P. and Thamaraiselvan, N. (2013) Aligning IT strategy with business strategy for competitive advantage: A structural equation model. International Journal of Business Excellence, 6 (4). pp. 425-447. ISSN 17560047

Mustafa, A.H. and Ari-Wahjoedi, B. and Ismail, M.C. (2013) Inhibition of CO2 corrosion of X52 steel by imidazoline-based inhibitor in high pressure CO2-water environment. Journal of Materials Engineering and Performance, 22 (6). pp. 1748-1755. ISSN 10599495

Mustafa, A.T. and Al-Kayiem, H.H. and Gilani, S.I.U. (2013) A review of the vortex engine. WIT Transactions on Ecology and the Environment, 179 VO. pp. 911-920. ISSN 17433541

Mustafa Ph.D., M.R. and Rezaur, R.B. and Saiedi, S. and Rahardjo, H. and Isa, M.H. (2013) Evaluation of MLP-ANN training algorithms for modeling soil pore-water pressure responses to rainfall. Journal of Hydrologic Engineering, 18 (1). pp. 50-57. ISSN 10840699

Mustaffa, Z. (2013) Characteristics of corrosion degradation in carbon steel pipelines. Advanced Materials Research, 626. pp. 807-812. ISSN 10226680

Mustaffa, Z. and Taufiq, M.B. and Thar, B.M. (2013) Wounding composite pipeline with internally pressurized conditions. Applied Mechanics and Materials, 353-35. pp. 3280-3283. ISSN 16609336

Mustaffa, Z.B. and Taufiq, M.B. and Badri, T.M. (2013) Bending and moment stability in reel mechanisms. Applied Mechanics and Materials, 353-35. pp. 3316-3319. ISSN 16609336

Mustapha, M. and Othman, E.A. and Norsal, K. and Mustapha, F. and Mamat, O. and Ramesh, S. (2013) Carbothermal nitridation process of mechanically milled silica sand using Taguchi's method. Ceramics International, 39 (6). pp. 6119-6130. ISSN 02728842

Muthuvalu, M.S. and Sulaiman, J. (2013) Performance analysis of the first order linear stationary iterative methods in solving third order Newton-Cotes quadrature system. International Journal of Mathematics and Computers in Simulation, 7 (4). pp. 379-387. ISSN 19980159

Muthuvalu, M.S. and Sulaiman, J. (2013) The quarter-sweep Geometric Mean method for solving second kind linear Fredholm integral equations. Bulletin of the Malaysian Mathematical Sciences Society, 36 (4). pp. 1009-1026. ISSN 01266705

N

Narahari, M. and Akilu, S. and Jaafar, A. (2013) Free convection flow of a nanofluid past an isothermal inclined plate. Applied Mechanics and Materials, 390. pp. 129-133. ISSN 16609336

Narahari, M. and Debnath, L. (2013) Unsteady magnetohydrodynamic free convection flow past an accelerated vertical plate with constant heat flux and heat generation or absorption. ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik, 93 (1). pp. 38-49. ISSN 00442267

Narahari, M. and Yahya, N. (2013) Effects of time dependent temperature and thermal radiation on free convection flow in unsteady couette motion. Applied Mechanics and Materials, 249-25. pp. 15-21. ISSN 16609336

Narayanan, S.P. and Fawwaz, A. and Hasimy, N.I. and Cossa, N.J. and Akram, M.K.M. (2013) Strength assessments of fixed steel offshore platforms for life extension. International Journal of Applied Engineering Research, 8 (4). pp. 469-498. ISSN 09734562

Nasif, M.S. and Al Waked, R. (2013) Using computational fluid dynamics simulation to perform fire investigation. Applied Mechanics and Materials, 393. pp. 845-850. ISSN 16609336

Nasif, M.S. and Al-Waked, R. and Behnia, M. and Morrison, G. (2013) Air to air fixed plate enthalpy heat exchanger, performance variation and energy analysis. Journal of Mechanical Science and Technology, 27 (11). pp. 3541-3551. ISSN 1738494X

Nasir, R. and Mukhtar, H. and Man, Z. and Mohshim, D.F. (2013) Material Advancements in Fabrication of Mixed-Matrix Membranes. Chemical Engineering and Technology, 36 (5). pp. 717-727. ISSN 09307516

Nasrifar, K. (2013) A perturbed-chain SAFT equation of state applied to mixtures of short- and long-chain n -alkanes. Industrial and Engineering Chemistry Research, 52 (19). pp. 6582-6591. ISSN 08885885

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2013) Experimental study of airless spray jet breakup at elevated temperature and pressure. Applied Mechanics and Materials, 393. pp. 711-716. ISSN 16609336

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2013) Investigation of vortex clouds and droplet sizes in heated water spray patterns generated by axisymmetric full cone nozzles. The Scientific World Journal, 2013. ISSN 1537744X

Nazir, B. and Hasbullah, H. (2013) Energy efficient and QoS aware routing protocol for Clustered Wireless Sensor Network. Computers and Electrical Engineering, 39 (8). pp. 2425-2441. ISSN 00457906

Nazir, M.S. and Wahjoedi, B.A. and Yussof, A.W. and Abdullah, M.A. (2013) Eco-friendly extraction and characterization of cellulose from oil palm empty fruit bunches. BioResources, 8 (2). pp. 2161-2172. ISSN 19302126

Ng, W.P.Q. and Lam, H.L. and Yusup, S. (2013) Supply network synthesis on rubber seed oil utilisation as potential biofuel feedstock. Energy, 55. pp. 82-88. ISSN 03605442

Nik Ab. Lah., N.K.I.B. and Irawan, S. (2013) Slagment cement improve the cement resistance toward acids attack during acidizing treatment. Research Journal of Applied Sciences, Engineering and Technology, 5 (21). pp. 4961-4966. ISSN 20407459

Nisar, H. and Malik, A.S. and Choi, T.-S. and Yap, V.V. (2013) Fast directional search algorithm for fractional pixel motion estimation for H.264 AVC. Journal of Electronic Imaging, 22 (3). ISSN 10179909

Nordin, A. and Majid, M.A.A. (2013) Assignment model for charging of thermal energy storage by electric chillers using zero-one programming approach. Asian Journal of Scientific Research, 6 (3). pp. 546-554. ISSN 19921454

Nordin, J.M. and Aljunid, S.A. and Rahim, R.A. and Anuar, M.S. and Arief, A.R. and Ahmad, R.B. and Saad, M.N. (2013) Performance evaluation of Fi-Wi network based on SCM-optical code division multiple access architecture. Optik, 124 (19). pp. 4046-4051. ISSN 00304026

Nordin, N. and Karim, Z.A.A. and Othman, S. and Raghavan, V.R. (2013) Design and development of low subsonic wind tunnel for turning diffuser application. Advanced Materials Research, 614-61. pp. 586-591. ISSN 10226680

Nordin, S.M. and Wan, R. (2013) Ethnography of communication on an offshore oil platform: Bridging organizational communication to ESL pedagogical practices. International Journal of Adult, Community and Professional Learning, 19 (1). pp. 47-57. ISSN 23286318

Nouh, S.A. and Lau, K.K. and Shariff, A.M. and Kushaari, K. (2013) Dynamic Adsorption of CO2 from Methane: Studies on Mass and Heat Transfer. Chemical Engineering and Technology, 36 (2). pp. 277-286. ISSN 09307516

Nugroho, H. and Ahmad Fadzil, M.H. and Shamsudin, N. and Hussein, S.H. (2013) Computerised image analysis of vitiligo lesion: Evaluation using manually defined lesion areas. Skin Research and Technology, 19 (1). e72-e77. ISSN 0909752X

O

Ong, M.C. and Shazili, N.A.M. and Menier, D. and Effendy, A.W.M. (2013) Levels of trace elements in tissue of Ostrea edulis and Crassostrea gigas from Quiberon Bay, Brittany, France. Journal of Fisheries and Aquatic Science, 8 (2). pp. 378-387. ISSN 18164927

Onur, M. (2013) Executive summary. SPE Journal, 18 (5). ISSN 1086055X

Orji, K.U. and Sapari, N. and Yusof, K.W. (2013) Characterization of lake water-groundwater exchange at Lake L5, Universiti Teknologi PETRONAS, Malaysia. WIT Transactions on Ecology and the Environment, 179 VO. pp. 631-639. ISSN 17433541

Osman, S.B.S. and Siddiqui, F.I. and Behan, M.Y. (2013) Relationship of plasticity index of soil with laboratory and field electrical resistivity values. Applied Mechanics and Materials, 353-35. pp. 719-724. ISSN 16609336

Osman Abdalla, M. and Nagarajan, T. and Hashim, F.M. (2013) Energy saving in the hydraulic cylinders by using novel self-actuated flow control valve (SAFCV). International Review of Mechanical Engineering, 7 (3). pp. 487-494. ISSN 19708734

Osman Ali, A.S. and Asirvadam, V.S.A. and Malik, A.S. and Aziz, A. (2013) Age-Invariant Face Recognition Technique Using Facial Geometry. Communications in Computer and Information Science, 378 CC. pp. 89-98. ISSN 18650929

Otairu, A. and Umar, A.A. and Zawawi, N.A.A. and Pakir, A.H.K. (2013) Public sector perception of barriers to the use of public-private partnerships (PPP) in nigeria-findings from a questionnaire survey. Research Journal of Applied Sciences, Engineering and Technology, 5 (9). pp. 2809-2820. ISSN 20407459

Oyefolahan, I.O. and Dominic, P.D.D. (2013) Knowledge management systems use and competency development among knowledge workers: The role of socio-technical antecedents in developing autonomous motivation to use. VINE, 43 (4). pp. 482-500. ISSN 03055728

P

Padmanabhan, E. and Eswaran, H. and Reich, P.F. (2013) Soil carbon stocks in Sarawak, Malaysia. Science of the Total Environment, 465. pp. 196-204. ISSN 00489697

Pakpahan, E.N. and Isa, M.H. and Kutty, S.R.M. and Chantara, S. and Wiriya, W. (2013) Polycyclic aromatic hydrocarbon removal from petroleum sludge cake using thermal treatment with additives. Environmental Technology (United Kingdom), 34 (3). pp. 407-416. ISSN 09593330

Pao, W. and Chen, X. and Chao, L. (2013) Optimization of insulation padding for directional solidification. Journal of Applied Sciences, 13 (2). pp. 321-325. ISSN 18125654

Partoon, B. and Malik, S.N.A. and Azemi, M.H. and Sabil, K.M. (2013) Experimental investigations on the potential of SDS as low-dosage promoter for carbon dioxide hydrate formation. Asia-Pacific Journal of Chemical Engineering, 8 (6). pp. 916-921. ISSN 19322135

Partoon, B. and Wong, N.M.S. and Sabil, K.M. and Nasrifar, K. and Ahmad, M.R. (2013) A study on thermodynamics effect of EMIM-Cl and OH-C2MIM-Cl on methane hydrate equilibrium line. Fluid Phase Equilibria, 337. pp. 26-31. ISSN 03783812

Patil, S. and Karuppanan, S. and Abdul Wahab, A. (2013) Contact pressure evaluation of a gear pair along the line of action using finite element analysis. Applied Mechanics and Materials, 393. pp. 403-408. ISSN 16609336

Prihatin, T. and Shuhaimi, M. and Mutalib, M.I.A. and Bustan, M.D. (2013) Synthesis of optimum water polygeneration system in ethylene glycol production. Industrial and Engineering Chemistry Research, 52 (22). pp. 7066-7073. ISSN 08885885

Pubellier, M. and Meresse, F. (2013) Phanerozoic growth of Asia: Geodynamic processes and evolution. Journal of Asian Earth Sciences, 72. pp. 118-128. ISSN 09696997

Q

Qasim, S. and Osman, S.B.S. (2013) Causal factors of Malaysian landslides: A narrative study. Research Journal of Applied Sciences, Engineering and Technology, 5 (7). pp. 2303-2308. ISSN 20407459

R

Rahim, N.F.A. and Taib, S.M. and Mahamad, S. (2013) Courses enrollment pattern analysis. Lecture Notes in Electrical Engineering, 152 LN. pp. 283-292. ISSN 18761100

Rahman, A.U. and Hasbullah, H. and Sama, N.U. (2013) Efficient energy utilization through optimum number of sensor node distribution in engineered corona-based (ONSD-EC) wireless sensor network. Wireless Personal Communications, 73 (3). pp. 1227-1243. ISSN 09296212

Rahman, M.M. and Hamada, K.I. and A. Aziz, A.R. (2013) Characterization of the time-averaged overall heat transfer in a direct-injection hydrogen-fueled engine. International Journal of Hydrogen Energy, 38 (11). pp. 4816-4830. ISSN 03603199

Rahman, N.H.A. and Razali, R. and Mansor, N. (2013) The study of biodegradation kinetics of starch based coating in controlled released fertilizer (CRF). Applied Mechanics and Materials, 295-29. pp. 240-248. ISSN 16609336

Rahmani, O. and Aali, J. and Junin, R. and Mohseni, H. and Padmanabhan, E. and Azdarpour, A. and Zarza, S. and Moayyed, M. and Ghazanfari, P. (2013) The origin of oil in the Cretaceous succession from the South Pars Oil Layer of the Persian Gulf. International Journal of Earth Sciences, 102 (5). pp. 1337-1355. ISSN 14373254

Rahmanian, N. and Ganimi, T.E. and Ghadiri, M. (2013) Further investigations on the influence of scale-up of a high shear granulator on the granule properties. Particuology, 11 (6). pp. 627-635. ISSN 16742001

Rahmanian, N. and Ghadiri, M. (2013) Strength and structure of granules produced in continuous granulators. Powder Technology, 233. pp. 227-233. ISSN 00325910

Rahmanian, N. and Homayoonfard, M. and Alamdari, A. (2013) Simulation of urea prilling process: An industrial case study. Chemical Engineering Communications, 200 (6). pp. 764-782. ISSN 00986445

Rahmat, R. and Malik, A.S. and Faye, I. and Kamel, N. and Nisar, H. (2013) An overview of LULU operators and discrete pulse transform for image analysis. Imaging Science Journal, 61 (2). pp. 146-159. ISSN 13682199

Rahmat, R. and Malik, A.S. and Kamel, N. and Nisar, H. (2013) 3D shape from focus using LULU operators and discrete pulse transform in the presence of noise. Journal of Visual Communication and Image Representation, 24 (3). pp. 303-317. ISSN 10473203

Rambli, D.R.A. and Sulaiman, S. and Mean, F.O. and Abdullah, N. and Nayan, M.Y. (2013) A design framework for 2-D semantic tool for personalizing garment design. Information Technology Journal, 12 (1). pp. 89-96. ISSN 18125638

Ramli, A. and Farooq, M. (2013) Synthesis and characterization of Mo/γ-Al2O3-MgO mixed oxide catalysts. Advanced Science Letters, 19 (3). pp. 1025-1028. ISSN 19366612

Ramli, A. and Misi, S.E.E. and Mohamad, M.F. and Yusup, S. (2013) H2 production from steam gasification of Palm Kernel Shell in the presence of 5 Ni/BEA and 5 Fe/BEA catalysts. Advanced Science Letters, 19 (3). pp. 950-954. ISSN 19366612

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Analysis of Journal Bearing with Double-Layer Porous Lubricant Film: Influence of Surface Porous Layer Configuration. Tribology Transactions, 56 (5). pp. 841-847. ISSN 10402004

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Analysis of journal bearing considering the effects of surface layer and couple stress fluids. Asian Journal of Scientific Research, 6 (2). pp. 315-322. ISSN 19921454

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Load capacity of partially textured journal bearing with trapezoidal recess. Applied Mechanics and Materials, 315. pp. 830-834. ISSN 16609336

Rashidi, N.A. and Yusup, S. and Hameed, B.H. (2013) Kinetic studies on carbon dioxide capture using lignocellulosic based activated carbon. Energy, 61. pp. 440-446. ISSN 03605442

Rashidi, N.A. and Yusup, S. and Loong, L.H. (2013) Kinetic studies on carbon dioxide capture using activated carbon. Chemical Engineering Transactions, 35. pp. 361-366. ISSN 22839216

Rauf, M. and Abdalla, A.N. and Fakharuddin, A. and Tadiwa, E. (2013) Response surface methodology in-cooperating embedded system for bus's route optimization. Research Journal of Applied Sciences, Engineering and Technology, 5 (22). pp. 5170-5181. ISSN 20407459

Raza, M.Q. and Baharudin, Z. and Badar-Ul-Islam and Azman Zakariya, M. and Khir, M.H.M. (2013) Neural network based STLF model to study the seasonal impact of weather and exogenous variables. Research Journal of Applied Sciences, Engineering and Technology, 6 (20). pp. 3729-3735. ISSN 20407459

Raza, M.R. and Ahmad, F. and Omar, M.A. and German, R.M. and Muhsan, A.S. (2013) Role of debinding to control mechanical properties of powder injection molded 316L stainless steel. Advanced Materials Research, 699. pp. 875-882. ISSN 10226680

Raza, M.R. and Ahmad, F. and Omar, M.A. and Muhsan, A.S. (2013) Development of defects free stainless steel parts using powder injection molding. Asian Journal of Scientific Research, 6 (2). pp. 307-314. ISSN 19921454

Razak, N.S.A. and Shaharun, M.S. and Mukhtar, H. and Taha, M.F. (2013) Separation of hydridocarbonyltris(triphenylphosphine) rhodium (I) catalyst using solvent resistant nanofiltration membrane. Sains Malaysiana, 42 (4). pp. 515-520. ISSN 01266039

Rehman, N.U. and Khan, M.A. and Naz, M.Y. and Shafiq, M. and Zakaullah, M. (2013) Characterization of 13.56 MHz RF Ne-N2 mixture plasma using intrusive and non-intrusive diagnostic techniques. Physica Scripta, 88 (4). ISSN 00318949

Riaz, N. and Chong, F.K. and Man, Z.B. and Khan, M.S. and Dutta, B.K. (2013) Photodegradation of orange II under visible light using Cu-Ni/TiO 2: Influence of Cu: Ni mass composition, preparation, and calcination temperature. Industrial and Engineering Chemistry Research, 52 (12). pp. 4491-4503. ISSN 08885885

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311. ISSN 21900558

Riza, R. and Ariwahjoedi, B. and Sulaiman, S.A. (2013) Solar radiation simulation by using zero-dimensional climate model. Asian Journal of Scientific Research, 6 (2). pp. 353-359. ISSN 19921454

Rusli, R. and Shariff, A.M. and Khan, F.I. (2013) Evaluating hazard conflicts using inherently safer design concept. Safety Science, 53. pp. 61-72. ISSN 09257535

S

Saaban, A. and Man, N.H. and Karim, S.A.A. (2013) Surface interpolation using partial differential equation with positivity preserving cubic Bézier curves boundary condition. Far East Journal of Mathematical Sciences, 75 (2). pp. 257-272. ISSN 09720871

Sabet, M. and Hassan, A. and Ratnam, C.T. (2013) Effect of zinc borate on flammability/thermal properties of ethylene vinyl acetate filled with metal hydroxides. Journal of Reinforced Plastics and Composites, 32 (15). pp. 1122-1128. ISSN 07316844

Sabet, M. and Hassan, A. and Ratnam, C.T. (2013) Electron-beam irradiation of low density polyethylene/ethylene vinyl acetate blends. Journal of Polymer Engineering, 33 (2). pp. 149-161. ISSN 03346447

Sabet, M. and Hassan, A. and Ratnam, C.T. (2013) Flammability and thermal characterization of aluminum hydroxide filled with LDPE. International Polymer Processing, 28 (4). pp. 393-397. ISSN 0930777X

Sabet, M. and Savory, R.M. and Hassan, A. and Ratnam, C.T. (2013) The effect of TMPTMA addition on electron-beam irradiated LDPE, EVA and blend properties. International Polymer Processing, 28 (4). pp. 386-392. ISSN 0930777X

Sabet, M. and Soleimani, H. and Hassan, A. and Ratnam, C.T. (2013) Effects of calcium stearate and metal hydroxide additions on the irradiated LDPE/EVA compound properties. Journal of Polymer Engineering, 33 (7). pp. 651-657. ISSN 03346447

Sabil, K.M. and Aziz, M.A. and Lal, B. and Uemura, Y. (2013) Effects of torrefaction on the physiochemical properties of oil palm empty fruit bunches, mesocarp fiber and kernel shell. Biomass and Bioenergy, 56. pp. 351-360. ISSN 09619534

Sabil, K.M. and Aziz, M.A. and Lal, B. and Uemura, Y. (2013) Synthetic indicator on the severity of torrefaction of oil palm biomass residues through mass loss measurement. Applied Energy, 111. pp. 821-826. ISSN 03062619

Safiah, M.D.N. and Bustam, M.A. and Yunus, N. and Man, Z. (2013) CO2 solubility in silica supported hmimTf2N. Advanced Materials Research, 626. pp. 509-514. ISSN 10226680

Sagar, A. and Rani, A.M.A. (2013) Comparative study on data acquisition techniques and solid reconstruction algorithm for quantitative ulcer wound assessment. Asian Journal of Scientific Research, 6 (3). pp. 423-433. ISSN 19921454

Sagu, O.L. and Pao, W.K.S. (2013) In-situ stress perturbation due to temperature around borehole during carbon injection. Asian Journal of Applied Sciences, 6 (1). pp. 40-49. ISSN 19963343

Said, A.M. and Dominic, D.D. and Samir, B.B. (2013) Outlier detection scoring measurements based on frequent pattern technique. Research Journal of Applied Sciences, Engineering and Technology, 6 (8). pp. 1341-1347. ISSN 20407459

Saiful Islam, A.B.M. and Jameel, M. and Ahmad, S. and Jumaat, M.Z. and Kurian, V.J. (2013) Structural behaviour of fully coupled spar-mooring system under extreme wave loading. Journal of Civil Engineering and Management, 19 (SUPPL.). S69-S77. ISSN 13923730

Salah, F. and Aziz, Z.A. and Ching, D.L.C. (2013) On accelerated MHD flows of second grade fluid in a porous medium and rotating frame. IAENG International Journal of Applied Mathematics, 43 (3). pp. 106-113. ISSN 19929978

Salam, M.A. and Lwin, Y. and Sufian, S. (2013) Synthesis of nano-structured Ni-Co-Al hydrotalcites and derived mixed oxides. Advanced Materials Research, 626. pp. 173-177. ISSN 10226680

Salam, M.A. and Sufian, S. and Lwin, Y. (2013) Hydrogen adsorption study on mixed oxides using the density functional theory. Journal of Physics and Chemistry of Solids, 74 (4). pp. 558-564. ISSN 00223697

Salam, M.A. and Sufian, S. and Murugesan, T. (2013) Catalytic hydrogen adsorption of nano-crystalline hydrotalcite derived mixed oxides. Chemical Engineering Research and Design, 91 (12). pp. 2639-2647. ISSN 02638762

Salam, M.A. and Sufian, S. and Murugesan, T. (2013) Characterization of nano-crystalline Mg-Ni-Al hydrotalcite derived mixed oxides as hydrogen adsorbent. Materials Chemistry and Physics, 142 (1). pp. 213-219. ISSN 02540584

Salam, M.A. and Sufian, S. and Murugesan, T. (2013) Hydrogen storage investigation of fixed bed of nano-crystalline Mg-Ni-Cr mixed oxides. Advanced Materials Research, 701. pp. 179-183. ISSN 10226680

Salih, Y. and Malik, A.S. and Walter, N. and Sidibé, D. and Saad, N. and Meriaudeau, F. (2013) Noise robustness analysis of point cloud descriptors. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8192 L. pp. 68-79. ISSN 03029743

Samir, B.B. and Zardari, M.A. and Rezk, Y.A.Y. (2013) Generation of prime numbers from advanced sequence and decomposition methods. International Journal of Pure and Applied Mathematics, 85 (5). pp. 833-847. ISSN 13118080

Sapin, F. and Hermawan, I. and Pubellier, M. and Vigny, C. and Ringenbach, J.-C. (2013) The recent convergence on the NW Borneo Wedge-a crustal-scale gravity gliding evidenced from GPS. Geophysical Journal International, 193 (2). pp. 549-556. ISSN 0956540X

Sarlan, A. and Ahmad, R. and Ahmad, W.F.W. and Dominic, D.D. (2013) A study of SME private healthcare personnel acceptance of Clinic Information System in Malaysia. International Journal of Business Information Systems, 14 (2). pp. 238-260. ISSN 17460972

Saw, C.L. and Al-Kayiem, H.H. and Owolabi, A.L. (2013) Experimental investigation on the effect of PCM and Nano-enhanced PCM of integrated solar collector performance. WIT Transactions on Ecology and the Environment, 179 VO. pp. 899-909. ISSN 17433541

Sazhin, S.S. and Elwardany, A.E. and Gusev, I.G. and Xie, J.-F. and Shishkova, I.N. and Cao, B.-Y. and Snegirev, A.Y. and Heikal, M.R. (2013) New models for droplet heating and evaporation. Asian Journal of Scientific Research, 6 (2). pp. 177-186. ISSN 19921454

Sazhin, S.S. and Xie, J.-F. and Shishkova, I.N. and Elwardany, A.E. and Heikal, M.R. (2013) A kinetic model of droplet heating and evaporation: Effects of inelastic collisions and a non-unity evaporation coefficient. International Journal of Heat and Mass Transfer, 56 (1-2). pp. 525-537. ISSN 00179310

Seli, H. and Awang, M. and Ismail, A.I.M. and Rachman, E. and Ahmad, Z.A. (2013) Evaluation of properties and FEM model of the friction welded mild steel-Al6061-alumina. Materials Research, 16 (2). pp. 453-467. ISSN 15161439

Shafie, A. and Wan Ahmad, W.F. and Mohd., N. and Barnachea, J.J. and Taha, M.F. and Yusuff, R.L. (2013) "SynMax": A mathematics application tool for Down syndrome children. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 615-626. ISSN 03029743

Shafiq, M.U. and Kyaw, A. and Shuker, M.T. (2013) A comprehensive research to find suitable acid for sandstone acidizing. Advanced Materials Research, 787. pp. 274-280. ISSN 10226680

Shafquet, A. and Ismail, I. and Jaafar, A. (2013) Thermal effect on void formation of waxy crude oil using electrical capacitance tomography. Jurnal Teknologi (Sciences and Engineering), 63 (1). pp. 105-113. ISSN 01279696

Shah, P.A. and Hasbullah, H.B. and Afghan, S.A. and Jung, L.T. and Lawal, I.A. and Mu�Azu, A.A. (2013) An enhanced procedure for mobile ipv6 route optimization to reduce handover delay and signaling overhead. Communications in Computer and Information Science, 414. pp. 216-226. ISSN 18650929

Shah, S.M.H. and Yusof, K.W. and Mustaffa, Z. and Hashim, A.M. (2013) The influence of cover on the water quality and suspended solids under the simulated rainfall condition. Modern Applied Science, 7 (7). pp. 42-47. ISSN 19131844

Shahzad, B. and Al-Ohali, Y. and Said, A.M. (2013) Software cost estimations for projects requiring customized revisions. Information (Japan), 16 (5). pp. 3097-3106. ISSN 13434500

Shaikh, M.S. and Shariff, A.M. and Bustam, M.A. and Murshid, G. (2013) Physical properties of aqueous blends of sodium glycinate (SG) and piperazine (PZ) as a solvent for CO2 capture. Journal of Chemical and Engineering Data, 58 (3). pp. 634-638. ISSN 00219568

Shaikh, P.H. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. (2013) Building energy management through a distributed fuzzy inference system. International Journal of Engineering and Technology, 5 (4). pp. 3236-3242. ISSN 23198613

Shaikh, P.H. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. (2013) Indoor building fuzzy control of energy and comfort management. Research Journal of Applied Sciences, Engineering and Technology, 6 (23). pp. 4445-4450. ISSN 20407459

Shairi, N.A. and Ahmad, B.H. and Wong, P.W. (2013) Bandstop to allpass reconfigurable filter technique in SPDT switch design. Progress In Electromagnetics Research C, 39. pp. 265-277. ISSN 19378718

Shairi, N.A. and Ahmad, B.H. and Wong, P.W. (2013) Switchable radial stub resonator for isolation improvement of SPDT switch. International Journal of Engineering and Technology, 5 (1). pp. 460-467. ISSN 09754024

Shakaib, M. and Ahmad, I. and Yunus, R.M. and Noor, M.Z. (2013) Preparation and characterization of modified nylon 66 membrane for blood purification. International Journal of Polymeric Materials and Polymeric Biomaterials, 63 (2). pp. 80-85. ISSN 00914037

Shakaib, M. and Ahmed, I. and Yunus, R.M. and Idris, A. (2013) Morphology and thermal characteristics of polyamide/monosodium glutamate membranes. International Journal of Polymeric Materials and Polymeric Biomaterials, 62 (6). pp. 345-350. ISSN 00914037

Shakaib, M. and Ahmed, I. and Yunus, R.M. and Idris, A. and Hussain, A. (2013) Influence of monosodium glutamate additive on the morphology and permeability characteristics of polyamide dialysis membranes. Journal of Applied Polymer Science, 128 (5). pp. 3346-3355. ISSN 00218995

Shakaib, M. and Hasani, S.M.F. and Ehtesham-ul Haque, M. and Ahmed, I. and Yunus, R.M. (2013) A CFD study of heat transfer through spacer channels of membrane distillation modules. Desalination and Water Treatment, 51 (16-18). pp. 3662-3674. ISSN 19443994

Sharif, A.M. and Basr, S. and Ali, H.O. (2013) A study on SME software development background and risk assessment implementation in Malaysia. World Applied Sciences Journal, 26 (12). pp. 1637-1642. ISSN 18184952

Shariff, A.M. and Wahab, N.A. (2013) Inherent fire consequence estimation tool (IFCET) for preliminary design of process plant. Fire Safety Journal, 59. pp. 47-54. ISSN 03797112

Shariff, A.M. and Zaini, D. (2013) Inherent risk assessment methodology in preliminary design stage: A case study for toxic release. Journal of Loss Prevention in the Process Industries, 26 (4). pp. 605-613. ISSN 09504230

Shariff, A.M. and Zaini, D. (2013) Using integrated toxic release consequences analysis tool for inherently safer design of process plant at preliminary design stage. Clean Technologies and Environmental Policy, 15 (5). pp. 851-858. ISSN 1618954X

Siddiqui, F.I. and Osman, S.B.A.B.S. (2013) Simple and multiple regression models for relationship between electrical resistivity and various soil properties for soil characterization. Environmental Earth Sciences, 70 (1). pp. 259-267. ISSN 18666280

Silvianita and Faris Khamidia, M. and Kuriana, V.J. (2013) Decision Making for safety assessment of mobile mooring system. Jurnal Teknologi (Sciences and Engineering), 61 (3). pp. 41-52. ISSN 01279696

Sing, C.Y. and Aris, M.S. and Al-Kayiem, H.H. (2013) Experimental investigations on the characteristics of Biomass and coal-biomass fuel briquettes. Advanced Materials Research, 683. pp. 246-249. ISSN 10226680

Sirageldin, A. and Baharudin, B. and Jung, L.T. (2013) Issues on trust management in wireless environment. Pertanika Journal of Science and Technology, 21 (1). pp. 183-192. ISSN 01287680

So'aib, M.S. and Sabet, M. and Krishnan, J. and Vps Veluri, M. (2013) Xanthan gumrecovery from palm oil-based fermentation broth by hollow fibre microfiltration (mf) membrane with processoptimisation using taguchi method. Chemical and Biochemical Engineering Quarterly, 27 (2). pp. 145-156. ISSN 03529568

Soleimani, H. and Yahya, N. and Abbas, Z. and Soleimani, H. and Zaid, H.M. (2013) Determination reflection and transmission coefficients of lanthanum iron garnet filled PVDF-polymer nanocomposite using finite element method modeling at microwave frequencies. Journal of Nano Research, 21. pp. 151-157. ISSN 16625250

Soomro, S. and Wan Ahmad, W.F. and Sulaiman, S. (2013) Evaluation of mobile games using playability heuristics. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 264-274. ISSN 03029743

Subhan, F. and Hasbullah, H. and Ashraf, K. (2013) Kalman filter-based hybrid indoor position estimation technique in bluetooth networks. International Journal of Navigation and Observation. ISSN 16875990

Subhani, A.R. and Xia, L. and Malik, A.S. (2013) Association of electroencephalogram scalp potential with autonomic nervous system. Advanced Science Letters, 19 (5). pp. 1340-1344. ISSN 19366612

Suhaimee, S. and Serin, T. and Ali, A.K. and Sulaiman, N.H. and Ghazali, Z. (2013) Public awareness and perception of nanotechnology in Malaysia. Nanotechnology Perceptions, 9 (3). pp. 198-210. ISSN 16606795

Sulaiman, S.A. and Isa, N. and Raskan, N.I. and Harun, N.F.C. (2013) Study of indoor air quality in academic buildings of a university. Applied Mechanics and Materials, 315. pp. 389-393. ISSN 16609336

Sumra, I.A. and Hasbullah, H.B. and Manan, J.-L.A. and Ahmad, I. and Alghazzawi, D.M. (2013) Classification of attacks in vehicular Ad hoc Network (VANET). Information (Japan), 16 (5). pp. 2995-3003. ISSN 13434500

Sutri, N.Y. and Dennis, J.O. and Khir, M.H.M. and Mian, M.U. and Tang, T.B. (2013) Chopper stabilized, low-power, low-noise, front end interface circuit for capacitive CMOS MEMS sensor applications. Modern Applied Science, 7 (12). pp. 34-42. ISSN 19131844

Syah Lubis, A.M.H. and Ariwahjoedi, B. and Sudin, M. and Parman, S. (2013) Thermo oxidative degradation behavior of jatropha curcass L. oil in the presence of antioxidant. Applied Mechanics and Materials, 393. pp. 893-898. ISSN 16609336

T

Taib, M.M. and Akbar, M.M. and Murugesan, T. (2013) Densities, refractive index and excess properties of bis(2-hydroxyethyl) ammonium acetate (bheaa) + monoethanolamine + water system at temperatures from 303.15 to 353.15 K. Journal of Molecular Liquids, 181. pp. 121-126. ISSN 01677322

Taiwo, A.A. and Downe, A.G. (2013) The theory of user acceptance and use of technology (UTAUT): A meta-analytic review of empirical findings. Journal of Theoretical and Applied Information Technology, 49 (1). pp. 48-58. ISSN 19928645

Tamiru, A.L. and Hashim, F.M. (2013) Application of bat algorithm and fuzzy systems to model exergy changes in a gas turbine. Studies in Computational Intelligence, 427. pp. 685-719. ISSN 1860949X

Tang, T.B. and Lu, C.K. and Laude, A. and Dhillon, B. and Murray, A.F. (2013) Noise reduction for ellipse fitting on medical images. Electronics Letters, 49 (3). pp. 178-179. ISSN 00135194

Teh, H.M. (2013) Hydraulic performance of free surface breakwaters: A review. Sains Malaysiana, 42 (9). pp. 1301-1310. ISSN 01266039

Teh, H.M. and Mohammed, N.I. (2013) Experimental study on wave dampening ability of floating breakwaters. Advanced Materials Research, 785-78. pp. 1253-1257. ISSN 10226680

Teh, H.M. and Venugopal, V. (2013) Performance evaluation of a semicircular breakwater with truncated wave screens. Ocean Engineering, 70. pp. 160-176. ISSN 00298018

Tesfamichael, A. and Assefa, A. (2013) Experimental analysis of potato slices drying characteristics using solar dryer. Journal of Applied Sciences, 13 (6). pp. 939-943. ISSN 18125654

Thulaseedharan, V. and Narayanan, S.P. (2013) Comparison of raft and folded plate foundations. International Journal of Applied Engineering Research, 8 (4). pp. 381-398. ISSN 09734562

Thulaseedharan, V. and Narayanan, S.P. (2013) Impact of coefficient of subgrade reaction on raft foundation design. International Journal of Applied Engineering Research, 8 (2). pp. 187-201. ISSN 09734562

Traini, C. and Menier, D. and Proust, J.-N. and Sorrel, P. (2013) Transgressive systems tract of a ria-type estuary: The late holocene vilaine river drowned valley (france). Marine Geology, 337. pp. 140-155. ISSN 00253227

Triwiyanto, A. and Hussain, P. and Rahman, A. and Ismail, M.C. (2013) The influence of nitriding time of AISI 316l stainless steel on microstructure and tribological properties. Asian Journal of Scientific Research, 6 (2). pp. 323-330. ISSN 19921454

Tufa, L.D. (2013) Direct synthesis controller identification. Advanced Materials Research, 622. pp. 1498-1502. ISSN 10226680

Turnad, L.G. and Hasan, F. and Ahmad, A.-R.M. and Bambang, A. (2013) Surface integrity and cutting temperature in machining of biomedical magnesium alloys-an overview. Advanced Materials Research, 748. pp. 7-10. ISSN 10226680

U

Uemura, Y. and Omar, W. and Othman, N.A. and Yusup, S. and Tsutsui, T. (2013) Torrefaction of oil palm EFB in the presence of oxygen. Fuel, 103. pp. 156-160. ISSN 00162361

Ugheoke, B.I. and Mamat, O. and Ari-Wahjoedi, B. (2013) Optimization of production process parameters of rice husk silica (RHS) refractories. Journal of the Australian Ceramic Society, 49 (1). pp. 92-100. ISSN 0004881X

Ugheoke, B.I. and Mamat, O. and Ari-Wahjoedi, B. (2013) Thermal expansion behavior, phase transitions and some physico-mechanical characteristics of fired doped rice husk silica refractory. Journal of Advanced Ceramics, 2 (1). pp. 79-86. ISSN 22264108

Ullah, R. and Khan, A. and Malik, A.S. (2013) Dual-purpose semi-fragile watermark: Authentication and recovery of digital images. Computers and Electrical Engineering, 39 (7). pp. 2019-2030. ISSN 00457906

Ullah, S. and Ahmad, F. and Yusoff, P.S.M.M. (2013) Effect of boric acid and melamine on the intumescent fire-retardant coating composition for the fire protection of structural steel substrates. Journal of Applied Polymer Science, 128 (5). pp. 2983-2993. ISSN 00218995

Umar, A.A. and Saaid, I.B.M. (2013) Silicate scales formation during asp flooding: A review. Research Journal of Applied Sciences, Engineering and Technology, 6 (9). pp. 1543-1555. ISSN 20407459

Umar, A.A. and Zawawi, N.A.W.A. and Khamidi, M.F. and Idrus, A. (2013) Stakeholder perceptions on achieved benefits of PFI procurement strategy. Modern Applied Science, 7 (4). pp. 31-40. ISSN 19131844

V

Vasant, P. (2013) Hybrid LS-SA-PS methods for solving fuzzy non-linear programming problems. Mathematical and Computer Modelling, 57 (1-2). pp. 180-188. ISSN 08957177

Vasant, P. (2013) Hybrid Mesh Adaptive Direct Search Genetic Algorithms and Line Search Approaches for Fuzzy Optimization Problems in Production Planning. Intelligent Systems Reference Library, 38. pp. 779-799. ISSN 18684394

Vasant, P. and Barsoum, N. and Webb, J.F. (2013) Editorial. Mathematical and Computer Modelling, 57 (1-2). p. 1. ISSN 08957177

Venkiteswaran, V.K. and Sulaiman, S.A. and Raghavan, V.R. (2013) Comparative study of the hydrodynamic performance of shorter and longer blades in a swirling fluidized bed. Advanced Materials Research, 772. pp. 560-565. ISSN 10226680

Verma, K. and Hasbullah, H. and Kumar, A. (2013) Prevention of DoS attacks in VANET. Wireless Personal Communications, 73 (1). pp. 95-126. ISSN 09296212

Vo, D.-V.N. and Arcotumapathy, V. and Abdullah, B. and Adesina, A.A. (2013) Evaluation of Ba-promoted Mo carbide catalyst for Fischer-Tropsch synthesis. Journal of Chemical Technology and Biotechnology, 88 (7). pp. 1358-1363. ISSN 02682575

Vo, D.-V.N. and Arcotumapathy, V. and Abdullah, B. and Adesina, A.A. (2013) Non-linear ASF product distribution over alkaline-earth promoted molybdenum carbide catalysts for hydrocarbon synthesis. Catalysis Today, 214. pp. 42-49. ISSN 09205861

Vuong, P.L. and Xia, L. and Malik, A.S. and Abd Rashid, R.B. (2013) Biomarker development on alcohol addiction using EEG. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8226 L (PART 1). pp. 199-206. ISSN 03029743

W

Wakita, K. and Pubellier, M. and Windley, B.F. (2013) Tectonic processes, from rifting to collision via subduction, in SE asia and the western pacific: A key to understanding the architecture of the Central Asian Orogenic Belt. Lithosphere, 5 (3). pp. 265-276. ISSN 19418264

Wan Ahmad, W.F. and Butt, S.M. and Rahim, L. (2013) Usability evaluation of the agile software process. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 640-651. ISSN 03029743

Wan Ahmad, W.F. and Md. Noordin, S. and Md. Shariffuldin, N.S. (2013) Development of a multimedia courseware for slow learner children with reading difficulties: MyLINUS. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 371-382. ISSN 03029743

Wassif, N. and Kafafy, A.M. and Abdel Aal, E.M. and Abdeldayem, A. and Odah, H. and Mostafa, R. (2013) Magnetic mineralogy of some ring complexes from the south eastern desert, Egypt. Arabian Journal of Geosciences, 7 (9). pp. 3455-3466. ISSN 18667511

Wei, K.S. and Karuppanan, S. and Abdul Latif, M.R.B. (2013) Development of an optical strain measurement method using digital image correlation. Asian Journal of Scientific Research, 6 (3). pp. 411-422. ISSN 19921454

Wilfred, C.D. and Mustafa, F.B. (2013) Synthesis, characterization and thermal properties of thiosalicylate ionic liquids. Journal of Chemical Sciences, 125 (6). pp. 1511-1515. ISSN 09743626

X

Xia, L. and Farooq, M.U. and Bell, I.M. and Hussin, F.A. and Malik, A.S. (2013) Survey and evaluation of automated model generation techniques for high level modeling and high level fault modeling. Journal of Electronic Testing: Theory and Applications (JETTA), 29 (6). pp. 861-877. ISSN 09238174

Xu, Y. and Choi, J. and Dass, S. and Maiti, T. (2013) Efficient Bayesian spatial prediction with mobile sensor networks using Gaussian Markov random fields. Automatica, 49 (12). pp. 3520-3530. ISSN 00051098

Xuan, T.W. and Taib, S.M. and Mahamad, S. (2013) Interactive mind map desktop widget: A proposed concept. Lecture Notes in Electrical Engineering, 152 LN. pp. 829-837. ISSN 18761100

Y

Ya'cob, A.S. and Abdullah Zawawi, W.N.A. and Isa, M.H. and Othman, I. (2013) Factors that affect sustainable construction waste management efforts at site. WIT Transactions on Ecology and the Environment, 179 VO. pp. 1169-1176. ISSN 17433541

Yaacob, M. and Uemura, Y. and Sabil, K.M. and Kai, T. and Kusakabe, K. and Mord Affandi, S.S. and Osman, N. (2013) Effects of reaction parameters on two-step alkali-alkali transesterification. Journal of the Japan Institute of Energy, 92 (8). pp. 702-706. ISSN 09168753

Yaakob, S.M. and Ismail, M.C. (2013) Corrosion inhibitor performance with presence of FeCO3 film in Co2 corrosion environment under fluid flow effect. Advanced Materials Research, 789. pp. 507-510. ISSN 10226680

Yahya, N. and Akhtar, M.N. and Nasir, N. and Daud, H. and Narahari, M. (2013) Forward modeling of seabed logging by finite integration and finite element methods. Advanced Structured Materials, 32. pp. 147-165. ISSN 18698433

Yahya, N. and Puspitasari, P. (2013) Y3Fe5O12nanocatalyst for green ammonia production by using magnetic induction method. Journal of Nano Research, 21. pp. 131-137. ISSN 16625250

Yahya, N. and Puspitasari, P. and Latiff, N.R.A. (2013) Hardness improvement of dental amalgam using zinc oxide and aluminum oxide nanoparticles. Advanced Structured Materials, 29. pp. 9-32. ISSN 18698433

Yaqub, A. and Ajab, H. (2013) Applications of sonoelectrochemistry in wastewater treatment system. Reviews in Chemical Engineering, 29 (2). pp. 123-130. ISSN 01678299

Yassen, T.A. and Al-Kayiem, H.H. and Habib, K. (2013) Design and performance investigation of a thermal back-up system for hybrid drying. WIT Transactions on Ecology and the Environment, 179 VO. pp. 921-931. ISSN 17433541

Yassen, T.A. and Al-kayiem, H.H. and Khalaf, M.H. and Dhamin, N.D. (2013) Analytical analysis of thermal energy storage performance of room heating system by solar energy. Asian Journal of Scientific Research, 6 (2). pp. 135-145. ISSN 19921454

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. and Ng, C.Y. (2013) Application of EMD-based TVAR model for modal analysis of semi-submersibles. International Journal of Mechanics, 7 (4). pp. 484-491. ISSN 19984448

Yew, G.Z. and Lim, E.S. and Liew, M.S. and Ng, C.Y. (2013) System identification of a six-legged semisubmersible subjected to wave loads through frequency domain analysis. Applied Mechanics and Materials, 373-37. pp. 770-784. ISSN 16609336

Yohannes, I. and Assaad, M. (2013) A four-colour optical detector circuit. International Journal of Electronics, 100 (2). pp. 196-204. ISSN 00207217

Yong, L.H.P. and Pao, W.K.S. and Hashim, F.M. (2013) Fill removal in wellbore using coiled tubing. Applied Mechanics and Materials, 393. pp. 863-871. ISSN 16609336

Yousaf, M. and Pervaiz, M. and Jabbar, A. and Zahoor, A.F. and Bokhari, T.H. and Anjum, A. and Sagir, M. and Khan, M.A. and Ali, K.G. and Ahmad, S. and Zia-Ur-Rehman, M. and Ashraf, S. and Qeureshi, K.S. (2013) Synthesis, characterization and biological studies of Bisμ-2,2'-N,N'- diylbis (nitrilomethylidyne)diphenolatodicobalt(II) using triple component solvent system. Asian Journal of Chemistry, 25 (4). pp. 2161-2164. ISSN 09707077

Yousaf, M. and Pervaiz, M. and Sagir, M. and Ashhar-Uz-Zaman and Mushtaq, M. and Naz, M.Y. (2013) Synthesis of tetradentate schiff base derivatives of transition bimetallic complexes as antimicrobial agents. Journal of the Chinese Chemical Society, 60 (9). pp. 1150-1155. ISSN 00094536

Yousaf, M. and Pervaiz, M. and Zahoor, A.F. and Hussain, A.I. and Khosa, M.K.K. and Ashraf, S. and Sagir, M. and Ashar-Uz-Zaman and Shehzad, K. (2013) Synthesis, characterization and biological studies of bis-μ-2,2'- ethane-1,3-diylbis(nitrilomethylidyne)diphenolatodicopper(II) Using Triple Component Solvent System. Asian Journal of Chemistry, 25 (1). pp. 521-524. ISSN 09707077

Yun, H.M. and Ahmad, J. and Yusup, S. and Kamil, R.N.M. and Chok, V.S. and Tzeng, L.M. (2013) Improvement of low temperature properties of jatropha-corn biodiesel blend with the addition of acrylic Co-polymer. Advanced Materials Research, 781-78. pp. 2480-2483. ISSN 10226680

Yusup, S. and Ahmad, M.M. and Uemura, Y. and Ali, R.M. and Azmi, A.S. and Mohamad, M.F. and Lay, S.L. (2013) Pre-treatment of Malaysian Agricultural Wastes Toward Biofuel Production. Green Energy and Technology, 115. pp. 393-416. ISSN 18653529

Z

Zabiri, H. and Ramasamy, M. and Lemma, T.D. and Maulud, A. (2013) Identification of nonlinear systems using parallel Laguerre-NN model. Advanced Materials Research, 785-78. pp. 1430-1436. ISSN 10226680

Zabiri, H. and Ramasamy, M. and Tufa, L.D. and Maulud, A. (2013) Integrated OBF-NN models with enhanced extrapolation capability for nonlinear systems. Journal of Process Control, 23 (10). pp. 1562-1566. ISSN 09591524

Zaid, H.M. and Yahya, N. and Latiff, N.R.A. (2013) The effect of nanoparticles crystallite size on the recovery efficiency in dielectric nanofluid flooding. Journal of Nano Research, 21. pp. 102-108. ISSN 16625250

Zakaria, N. and Pal, A.J. and Shah, S.N.M. (2013) Stagewise optimization of distributed clustered finite difference time domain (FDTD) using genetic algorithm. International Journal of Innovative Computing, Information and Control, 9 (6). pp. 2303-2326. ISSN 13494198

Zakaria, N. and Taiwo, A. (2013) The effect of team leader skills and competencies team: A Structural equation modelling approach. Asian Social Science, 9 (7). pp. 151-161. ISSN 19112017

Zaki Abdullah, M. and Dan-Mallam, Y. and Megat Yusoff, P.S.M. (2013) Effect of environmental degradation on mechanical properties of kenaf/polyethylene terephthalate fiber reinforced polyoxymethylene hybrid Composite. Advances in Materials Science and Engineering, 2013. ISSN 16878434

Zaman, M.A. and Alam, M.M. and Matin, M.A. (2013) Performance of different acids on sandstone formations. Journal of Engineering Science and Technology Review, 6 (3). pp. 25-29. ISSN 17919320

Zamin, N. and Oxley, A. and Bakar, Z.A. (2013) Projecting named entity tags from a resource rich language to a resource poor language. Journal of Information and Communication Technology, 12 (1). pp. 121-146. ISSN 1675414X

Zarif, S. and Faye, I. and Rohaya, D. (2013) Fast and efficient video completion using object prior position. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8237 L. pp. 241-252. ISSN 03029743