publication venue for
- A comparison of deep learning-based techniques for solving partial differential equations 2024
- Conversion of CO2-CH4 mixture into carbon nanotubes by catalytic chemical vapor deposition 2024
- Crude palm oil effect on aged binder morphological characteristics 2024
- Development of gas turbine model interface for digital twin application 2024
- Development of universal OCDMA DW code family equation and structure 2024
- Effect of dosage of composite cellulose-chitosan-magnetite-alginate hydrogel beads bio-sorbent on copper removal 2024
- Effect of particle size, solvent to sludge ratio and solvent temperature on the extraction of lipids from sewage sludge cake using methanol 2024
- Fly ash grafted poly(acrylic acid-co-acrylamide) composite hydrogel as the carbon dioxide adsorbent 2024
- Heat recovery from plasma pyrolysis waste treatment 2024
- Impact of different maintenance strategies on oil refinery facilities 2024
- Influence of SDS surfactants for nanofluid oxide water-based on rheological properties 2024
- Insight into the performance of biochar-based graphitic carbon nitride derived from biomass waste 2024
- Investigating the effect of cornering maneuver on the performance of bituminous racetrack pavement 2024
- Multi-factors optimization of injection moulded plastic bearing via Taguchi method 2024
- Optimisation of 3d printing parameters of acrylonitrile-butadiene-styrene thin-walled and hollow structure via integration Taguchi method and principle component analysis 2024
- Optimization of based catalyzed transesterification and characterization of palm oil methyl ester 2024
- Optimization of sodium bicarbonate based solar pond for power generation 2024
- Performance of silica waste as a stabilizing agent in peat 2024
- Preliminary screening of agri-food waste for potential recovery of microalgae biostimulant 2024
- Preliminary study on using seaweed biomass to harvest microalgae for lipid production 2024
- Rheological properties of surfactants on water-based nanofluids with on DWCNTs and MWCNTs using various surfactants 2024
- Simulating the impact of extreme aircraft loading on the performance of bituminous pavement for airport application 2024
- The characterization of dairy scum oil, eggshell and cow bone catalyst to determine the potential for transesterification 2024
- The convergence and stability analysis of 2-point block backward differential formula with additional second derivative term 2024
- A review on the autonomous technology in ASEAN NCAP 2023
- A simple chemical processing route in order to obtain high purity graphene 2023
- Adsorption and desorption of ametryn in paddy field and irrigation canal soil 2023
- Anaerobic digestion of sewage sludge for enhancing the growth of black soldier fly larvae 2023
- Artificial neural network for HCCI engine 2023
- Bidirectional portable electric vehicle charger with LLC converter 2023
- Bioconversion of mixed wastes food kitchen waste and soybean residue into biodiesel by black soldier fly larvae (Hermetia illucens L.) 2023
- Cascade-Forward Neural Network (CFNN) for biomass heating value prediction 2023
- Comparative investigation of deep eutectic solvent (DES) with ionic liquids as shale inhibitors in water based mud 2023
- Comparison of quercetin yield obtained using convectional and ultrasound-assisted extraction from Chromolaena Odorata 2023
- Compression behaviour of sandstones at Kati formation, Malaysia 2023
- Computational fluid dynamics analysis of double pipe heat exchanger using titanium dioxide nanofluid with ethylene glycol/water 2023
- Conductive MXene/PVDF composite binder using solution processing 2023
- Control strategies of power electronic converter for grid-tied variable low-speed wind turbine 2023
- Development an algorithm of magnitude changes of frequency response analysis for transformer 2023
- Development of autonomous mobile robot with defined path control using intelligent robot operating system 2023
- Effect of Ce loading on catalytic activity of MgO based catalysts for production of vanillin 2023
- Effect of graphene oxide on the long-term modulus of elasticity and Poisson’s ratio of rubberized ECC 2023
- Experimental study on the methane adsorption behaviour in shale gas reservoir 2023
- Feasibility of bituminous stabilizer in the stabilization of problematic soil: An overview on the non-traditional soil additive 2023
- Highlights on vibration based health monitoring of offshore platform using deep learning 2023
- Highly conductive graphene paste as sensing element for detection of Ochratoxin A 2023
- Investigation of force analysis Stewart platform actuated by Shape Memory Alloy (SMA) 2023
- Life cycle assessment of water treatment processes in Malaysia: A quest for greener practice 2023
- Mathematical modelling & simulation of crossbreed smart electric powertrain (a smart electric powertrain for e-bikes) 2023
- Offshore coxswain competency evaluation tool (OC2ET) for continuous monitoring and evaluation on-board offshore facilities 2023
- Oxidative extractive desulfurization system for fuel oil using acidic eutectic-based ionic liquid 2023
- Particulate matter and nitrogen oxide emissions prediction using artificial neural network for diesel engine running on biodiesel-diesel fuel with nano-additive 2023
- Performance of greenhouse type solar still on fresh water productivity 2023
- Photocatalyst activity of TiO2/SWCNT composite on floating cork for degradation of methylene blue by solar simulator 2023
- Photocatalytic demulsification of oily wastewater by TiO2-magnetite-reduced graphene oxide nanocomposites 2023
- Preface: 2nd International Conference on Engineering and Industrial Technology 2021 (ICEIT 2021) 2023
- Process optimization of vapour recompression (VRC) column for palm kernel oil (PKO) fatty acid fractionation 2023
- Research advances on the application of FLEXSIM in maintenance processes: A mini review 2023
- Simulation of carbon dioxide foam flooding-biosurfactant performance in alpha field 2023
- Simultaneous removal of dye from aqueous solution by magnetite reduce graphene oxide nanocomposites 2023
- Solubilizing waste activated sludge via thermal treatment to enhance the biodegradability 2023
- Synthesis and characterization of Tungsten-metal-organic framework/pyrrole-reduced graphene oxide 2023
- The addition of graphene nanoplatelets on the thermal characteristics of polycarbonate 2023
- The behavior of rubberized engineered cementitious composites under extreme loading: A review 2023
- The impact of introducing liquid-type carbon towards the growth performance and lipid accumulation of microalgae 2023
- The potential role of industrialized building systems (IBS) in Malaysian sustainable construction: Awareness and barriers 2023
- The use of SiO2-H2O nanofluid to improve heat transfer in a linear fresnel mirror collector (LFMC) with CPC 2023
- Thermophysical properties and molecular interactions of fuel oxygenate mixture at different temperatures via Jouyban–Acree model 2023
- A multi-objective optimization and sustainability of H2S conversion into sulfur by claus process using symmetry simulation 2022
- An overview on available treatment processes of poultry manure in Malaysia 2022
- Application of multiple regression technique for predicting drilling rate in loss zone 2022
- Cluster detection for spatio-temporal dengue cases at Selangor districts using multi-EigenSpot algorithm 2022
- Color measurement for petroleum products: A short review 2022
- Comparative between vertical and horizontal panel orientation for optimum membrane surface patterning effect 2022
- Decision making tool for process hazard evaluation and risk assessment during preliminary design stage in chemical process industry 2022
- Density functional theory calculations for the electronic structure of carbon and copper co-doped TiO2 rutile model 2022
- Determination of bisphenol a in mineral water by membrane-protected micro-solid phase extraction followed by high-performance liquid chromatography diode array detector 2022
- Electrospun nanofiber adsorption amino-based ionic liquid for iron removal 2022
- Evaluation of water saturation in shale gas reservoirs by using different techniques – A case study from the Permian Murteree formation, Cooper Basin, South Australia 2022
- Fault diagnosis by using multi-scale signed directed graph 2022
- Fortification of black soldier fly larval feeding substrate for producing biodiesel 2022
- Investigation of rheological and filtration behavior of tapioca starch in nondamaging water-based muds 2022
- Mo-promoted Ni/CeO2 synthesized via sonochemical method as potential catalyst in aqueous phase reforming of glycerol for production of 1,3-propanediol 2022
- Optimization of adsorption parameters of anionic dye on polyvinyl alcohol hydrogel-based adsorbents 2022
- Preparation and characterization of inverse vulcanized copolymers using taramira oil 2022
- Seismic surface wave as supporting method to soil investigation 2022
- Student procrastination analysis in virtual learning environments 2022
- Synthesis, structural elucidation and application of core- shell structured black titanium dioxide photocatalyst for the removal of phenolic compounds from real wastewater 2022
- The effect of volume ratio of methanol and temperature on yields and properties of biodiesel from callophylum inophylum oil 2022
- The impact of service-based learning approach on student performance in water engineering courses 2022
- The potential usage of fishing net line waste for fabrication of electrospun nylon 6,6 nanofiber membrane 2022
- Utilization of solid palm kernel expeller for attached growth of Chlorella vulgaris sp. 2022
- A review on connection between meshfree peridynamics and meshfree methods 2021
- Crumb rubber mortar and its properties: An overview 2021
- Employability skills: What do employers need? 2021
- Multi-Criteria comparison of the primary factors of chemical exposure in construction projects 2021
- Numerical study to determine the optimum design of PV/T water collector, pipes diameter, and number of pipes 2021
- Optimization of wear behavior on unreinforced/glass fiber reinforced plastic injection moulded gear via integration of Taguchi method and principal component analysis 2021
- Physical properties of rubberized self-consolidating concrete (R-SCC) incorporating nano-silica 2021
- The effects of graphene hybridization on mechanical properties of GFRP composites 2021
- Analysis of the hydrocarbon seepage detection in oil palm vegetation stress using unmanned aerial vehicle (UAV) multispectral data 2020
- Determination of CO2 diffusivity in subsurface systems using molecular dynamics simulation 2020
- Enhanced photoelectrochemical performance of Fe2O3/ZnO nanocomposite film 2020
- Fabrication and characterization of a novel acacia gum copolymer for improving graphene-based membrane 2020
- Modelling 1-D synthetic seabed logging data for thin hydrocarbon detection: An application of Gaussian process 2020
- Synthesis, characterization and CO2 sorption capacity measurements of selected ionic liquid polymers 2020
- An empirical model and sensitivity analysis for silica oxide in enhanced oil recovery 2019
- Application of response surface methodology to investigate the effect of different variables on fusion slagging index 2019
- Enhancement of the activated carbon over methylene blue removal efficiency via alkali-acid treatment 2019
- Forecast the moisture ratio removal during seaweed drying process using solar drier 2019
- Impact of limited feed medium and different lipid extraction solvents in dealing with black soldier fly larvae 2019
- MHD stagnation point flow over a permeable stretching/shrinking sheet with a heat sink and radiation effects 2019
- Modelling of solubility of mercaptans in water at low concentrations 2019
- Modification of rubber-seed shell activated carbon using chitosan for removal of Cu2+ and Pb2+ from aqueous solution 2019
- Multiwalled carbon nanotubes and graphene oxide as nano-additives in water-based drilling fluid for enhanced fluid-loss-control & gel strength 2019
- Online process monitoring using multiscale principal component analysis 2019
- Particle stability of nano-zinc oxide and nano-silica in sodium silicate solution 2019
- Reconstruction of residential buildings post-disaster: A comparison of influencing factors 2019
- Removal of malachite green by sugarcane bagasse biochar using response surface methodology 2019
- Simulation of predictive kinetic combustion of single cylinder HCCI engine 2019
- A review on accessible design requirement for mobile application among physically impaired users 2018
- A review on free piston linear engine (FPLE) 2018
- A review on the operating characteristics of free piston engine and its recent developments 2018
- A review on usability guidelines for designing mobile apps user interface for children with autism 2018
- Biogas production from chicken food waste and cow manure via multi-stages anaerobic digestion 2018
- Bouncing phenomena of free piston linear generator at starting process 2018
- CFD based investigation on effect of classifier blade length to coal particle distribution in coal pulverizer 2018
- CFD simulation of liquid-to-air membrane energy exchangers (LAMEE): Flat plate exchanger effectiveness 2018
- Characterization of asphaltenes from the middle east crude oil 2018
- Characterization of the effect of pressure difference on in-cylinder flow field using proper orthogonal decomposition (POD) 2018
- Color-based oil spill image segmentation 2018
- Corrosion under insulation rate prediction model for piping by two stages of artificial neural network 2018
- Desıgn and development of casted staın less steel Y-Tee joınt for oıl and gas applıcatıon 2018
- Development of the carbon nanofibers (CNFs) supported iron catalyst via deposition precipitation method 2018
- Effect of back rake angle and shape on wear rate of PDC cutter in hard formation 2018
- Effect of dispersing agent on the thermal properties of basalt fibre reinforced intumescent coating 2018
- Effect of pressure in crossover port to the in-cylinder flow of split-cycle engine 2018
- Effects of fluoropolymer and calcium stearate on melt flow index and mechanical properties of high-density polyethylene 2018
- Enhancing surface quality of Zr-Cu-Ni-Ti-Be through hydroxyapatite mixed EDM for potential orthopedic application 2018
- Experiences and lessons from an anomaly root cause analysis in a large district cooling plant 2018
- Experimental and numerical analysis of different flow modifier on the reversal flow region in s-shaped aggressive diffuser 2018
- Experimental study on compressive strength of sediment brick masonry 2018
- Experimental study on the impact of wet sand particle to the erosion of carbon steel and HDPE 2018
- Factors affecting the eco-efficiency design of reinforced concrete structure of low-rise and high-rise residential house in Malaysia 2018
- Green synthesis of reduced graphene oxide decorated with iron oxide nanoparticles using Oolong Tea extract 2018
- Green synthesis of reduced graphene oxide using green tea extract 2018
- Harvesting and pre-treatment of microalgae biomass via ozonation for lipid extraction: A preliminary study 2018
- Image synchronization gateway for NoSQL document database and server-side SQL database in mobile environment 2018
- Insect-based lipid for biodiesel production 2018
- Investigation of late fuel injection position on the combustion of free piston engine 2018
- Investigation on intake manifold volume in free-piston linear generator engine 2018
- Magneto-hydrodynamics of bubbly flow in horizontal pipe: New criteria through numerical simulation 2018
- Micromechanics analysis of rhombus model via finite elements integrated with Taguchi method and principle component analysis 2018
- Nano-silica effect on the poly (1, 8-octanediol citrate) composite properties for bone plate application 2018
- Numerical investigation on the effect of fire compartment opening width and heat release rate on the horizontal projection of smoke plume in a full-scale atrium 2018
- Numerical investigation on the utilization of phase change material (PCM) to reduce building’s HVAC energy consumption 2018
- Numerical simulation of the non-Newtonian blood flow through aortic Bileaflet mechanical heart valve using fluid-structure interaction approach 2018
- One pot biodiesel production from wet Chlorella vulgaris using supercritical methanol with oxide catalysts 2018
- PDC cutter optimization using response surface methodology with orthogonal arrays 2018
- Performance and emissions investigation of a single cylinder diesel engine using enhanced blend biodiesel by nanoparticles 2018
- Performance characteristics of free piston linear generator on different equivalence ratio 2018
- Performance investigation on an integrated multi-stage cylindrical-tank solar water heater 2018
- Potential of protein and lipid productions from black soldier fly larvae fed with mixture of waste coconut endosperm and soybean curd residue 2018
- Prediction of performance parameters of stratified TES tank using artificial neural network 2018
- RTL platform validation of digital intellectual property (IP) of real time clock (RTC) for customized wireless microcontroller unit 2018
- Simulation of swirling wet steam flow through a supersonic nozzle 2018
- Simulation study on impact of fine sand particle to 90° steel elbow in pipe 2018
- Strategies and methods of RCCI combustion: A review 2018
- Synthesis, characterization and study of graphene oxide 2018
- The effect of CO2-H2S on corrosion of low alloy steel 3%Cr in high partial pressure CO2 environments 2018
- The effect of engine throttle position on the performance characteristics of a crank-rocker engine fitted with a conventional cylinder head 2018
- The effect of unstable emulsion of water-in-diesel on micro-explosion phenomena 2018
- The performance of the interval midpoint zoro symmetric single-step (IMZSS2-5D) procedure to converge simultaneously to the zeros 2018
- Thermophysical properties and CO2 absorption of ammonium-based ionic liquids 2018
- Two-phase slug flow separation at T-junction with regular and reduced vertical side arm 2018
- Ultrafast-contactless plasma arc sintering 2018
- Ultrasonic assisted dissolution of bamboo biomass using ether-functionalized ionic liquid 2018
- Underfloor air distribution technology: A review 2018
- VLE of carbon dioxide loaded aqueous potassium lysinate with separate blends of piperazine and 2-amino-2-methyl-1-propanol 2018
- pH optimization to promote attached growth of microalgae biomass onto polyurethane foam material 2018
- A study on acceptance of mobileschool at secondary schools in Malaysia: Urban vs rural 2017
- An overview of crystalline silicon solar cell technology: Past, present, and future 2017
- Application of implicit scheme with AGE iterative method for solving fuzzy parabolic equation 2017
- Assessment of nylon 6, 6 nanofibre membrane for microalgae harvesting 2017
- Battery management systems (BMS) optimization for electric vehicles (EVs) in Malaysia 2017
- Benzene and cyclohexane separation using 1-butyl-3-methylimidazolium thiocyanate 2017
- Block method for third order ordinary differential equations 2017
- Burst pressure investigation of filament wound type IV composite pressure vessel 2017
- Carbon dioxide capture via aqueous N-methyldiethanolamine (MDEA)-1-butyl-3-methylimidazolium acetate ([bmim][Ac]) hybrid solvent 2017
- Catalytic performance of Ni/MgO catalyst in methane dry reforming 2017
- Characterization of doped LiMn2O4 powder prepared by the sol-gel method: Thermal analysis and XRD studies 2017
- Characterizations of natural dye from garcinia mangostana with graphene oxide (GO) as sensitizer in dye-sensitizer solar cells 2017
- Comparison on graphite, graphene oxide and reduced graphene oxide: Synthesis and characterization 2017
- Effect of composite layers on partially wrapped Al-glass/epoxy hybrid tube subjected to axial load 2017
- Experimental determination of nanofluid specific heat with SiO2 nanoparticles in different base fluids 2017
- Experimental measurement and thermodynamic modeling of the solubility of carbon dioxide in aqueous blends of monoethanolamine and diethanolamine 2017
- Extraction of benzene and cyclohexane using [BMIM][N(CN)2] and their equilibrium modeling 2017
- Graphene modified FTO/TiO2 interface photoelectrode for improved performance of dye sensitized solar cells 2017
- Heave motion prediction of a large barge in random seas by using artificial neural network 2017
- Implications of drying temperature and humidity on the drying kinetics of seaweed 2017
- Improving the affinity of silicon surface for biosensor application: The interaction between multiwall carbon nanotube (MWCNT) and chitosan (CS) 2017
- Investigation near IR absorption in thin crystalline Si wafers with randomly etched nano-pillars 2017
- Mathematical modeling of photovoltaic thermal PV/T system with v-groove collector 2017
- Modifications of sugarcane bagasse-derived adsorbents to enhance the adsorption of microalgae biomass in easing harvesting process 2017
- Modified ZIF-8 mixed matrix membrane for CO2/CH4 separation 2017
- Molecular dynamics simulation of membrane in room temperature ionic liquids 2017
- Optimum welding parameter for GMA welding using soft computing techniques 2017
- Parametric optimisation of heat treated recycling aluminium (AA6061) by response surface methodology 2017
- Performance of mechanical behavior of kenaf fibre reinforced foamed composite 2017
- Recent developments in machine learning applications in landslide susceptibility mapping 2017
- Rent-seeking behaviors in property development: A literature review 2017
- Rheological properties of a reclaimed waste tire rubber through high-pressure high-temperature sintering 2017
- Silica incorporated membrane for wastewater based filtration 2017
- Synthesis and application of surfactants coated magnetite nanoparticles for demulsification of crude oil in water emulsion 2017
- Synthesis and characterization of oil palm empty fruit bunch-grafted-polyvinyl alcohol (OPEFB-g-PVA) hydrogel for removal of copper ions from aqueous solution 2017
- Synthesis and characterization of thermally stable zirconia based mesoporous nanosilica with metalloporphyrin encapsulation 2017
- Tailoring MCM-41 mesoporous silica particles through modified sol-gel process for gas separation 2017
- The effect of oleic acid as post spinning treatment on tensile strength of polyacrylonitrile fibers 2017
- 3-Dimensional wireless sensor network localization: A review 2016
- 3-Dimensional wireless sensor network localization: A review 2016
- A maximum likelihood estimation framework for delay logistic differential equation model 2016
- A study of electric field components in shallow water and water half-space models in seabed logging 2016
- Adsorption of indoor toxic gas by ionic liquid impregnated activated carbons 2016
- An easy, green and ultra-fast synthesis of dicationic ionic liquids: From days to minutes 2016
- Band gap and conductivity evaluation of carbon nanotube with hematite for green ammonia synthesis 2016
- Biophysical properties of DNA in hydrated ionic liquids 2016
- Characterization of PolyMUMPs-based in-plane electromagnetic actuator 2016
- Classification of skin cancer images using local binary pattern and SVM classifier 2016
- Comparison of preparation techniques for CoFeNb/CNTs catalyst 2016
- DFT study of gases adsorption on sharp tip nano-catalysts surface for green fertilizer synthesis 2016
- Denoising using new thresholding method 2016
- Density and molar volumes of imidazolium-based ionic liquid mixtures and prediction by the Jouyban-Acree model 2016
- Design of PolyMUMPS device for diabetes screening via acetone vapor detection in exhaled breath 2016
- Development of algorithm for single axis sun tracking system 2016
- Direct fifth order block method for solving second order Neumann and singular perturbed boundary value problem 2016
- Domain wall motion and Barkhausen effect in magnetic nanoparticles for EOR applications 2016
- Dynamics of liquid slug using particle image velocimetry technique 2016
- Effect of CMC on the stability of ZnO nanofluid at high temperature and salinity 2016
- Effect of electrode gap on the sensing properties of multiwalled carbon nanotubes based gas sensor 2016
- Effect of zirconia on the physicochemical properties of copper (II) imidazolate frameworks 2016
- Enhanced photoelectrochemical activity by nanostructured V2O5/TiO2 bilayer 2016
- Evaluation of CO2 emission from dye solar cell panel production process 2016
- Evaluation of synthesis characterization and simulation study of magnetic nanoparticles for ammonia synthesis in MIM 2016
- Experimental study on the effect of saturation magnetization of hematite nanocatalyst for green ammonia production 2016
- Fluorocarbon compatibilized gold-silica nanocomposites for recyclable regioselective hydroamination of alkynes in a fluorous biphasic system 2016
- Formation of raspberry like cobalt particles with hydrazine reduction in a polyol route 2016
- Highly oriented graphene growth and characterization 2016
- Hydrogenation of CO2 to methanol using copper/zinc oxide-based catalyst: Effect of active metal ratio 2016
- Impact of pH on zinc oxide particle size by using sol-gel process 2016
- Influence of cobalt substitution on the structural and magnetic properties of cobalt substituted magnetite 2016
- Influence of various cation valence, salinity, pH and temperature on bentonite swelling behaviour 2016
- Integrated photooxidative extractive deep desulfurization using metal doped TiO2 and eutectic based ionic liquid 2016
- Investigating the performance of nitrogen-doped graphene photoanode in dye-sensitized solar cells 2016
- Investigation of photoconversion efficiency of Cu and Ni doped TiO2 thin film in photoelectrochemical cell 2016
- MATLAB simulation of Mie scattering by hollow sphere TiO2 for dye solar cell application 2016
- MHD stagnation point flow over a stretching cylinder with variable thermal conductivity and joule heating 2016
- Magnetoviscous effect of ferrite-based magnetic fluid for EOR application 2016
- Mixed convection flow over a stretching porous wedge with Newtonian heating in the presence of heat generation or absorption 2016
- Mixed convection flow past through a stretching cylinder with heat generation/absorption and convective boundary condition 2016
- Modeling of CO2 solubility in pyridinium-based ionic liquids using UNIQUAC 2016
- Modeling shales and marls reflections by autoregression method 2016
- Morphology and performance of Cu/ZnO based catalyst: Comparison between Al2O3 and SiC support 2016
- Multi-resolution analysis for ear recognition using wavelet features 2016
- Nonlinear dynamical system identification using unscented Kalman filter 2016
- On the convergence of two point block backward differentiation formula for second order ODEs 2016
- Optimization of injection molding process parameters for a plastic cell phone housing component 2016
- Performance analysis of 2-Point explicit group iterative methods for solving four-point composite closed Newton-Cotes system 2016
- Performance analysis of successive over relaxation method for solving glioma growth model 2016
- Performance and energy analysis of a solar hybrid desiccant air-conditioning system 2016
- Preconditioned Jacobi-type iterative methods for solving Fredholm integral equations of the second kind 2016
- Prediction of activity coefficient of sulfones at infinite dilution in ionic liquids and their modeling using COSMO-RS 2016
- Preparation and characterization activated carbon from rice husk and oil palm empty fruit bunches for removal of Zn2+ in aqueous solution 2016
- Pressure sensor based on pristine multi-walled carbon nanotubes forest 2016
- Pretreatment of carbon nanotubes: Effects on its properties and catalytic performances 2016
- QSAGE iterative method applied to fuzzy parabolic equation 2016
- RF-MEMS tunable interdigitated capacitor and fixed spiral inductor for band pass filter applications 2016
- Recrystallized quinolinium ionic liquids for electrochemical analysis 2016
- Refinements of some new efficient quadrature rules 2016
- Rheological and stability study of water-in-crude oil emulsions 2016
- Simpler Neill mapping function using nonlinear curve fitting method 2016
- Simpler component of non-hydrostatic UNBabc mapping function using nonlinear curve fitting method 2016
- Simpler hydrostatics component of UNBabc mapping function using nonlinear curve fitting method 2016
- Sliding window correlation analysis for dengue-climate variable relationship 2016
- Spent coffee grounds-based activated carbon preparation for sequestering of malachite green 2016
- Squared exponential covariance function for prediction of hydrocarbon in seabed logging application 2016
- Stability and electrorheology of ZnO nanofluids in the presence of anionic surfactants 2016
- State estimation of the power system using robust estimator 2016
- Structural and magnetic properties of Ni1-xZnxFe2O4 synthesized through the sol-gel method 2016
- Structural and magnetic properties of hexagonal barium ferrite synthesized through the sol-gel combustion route 2016
- Synthesis and characterization of Ni0.5Zn0.4Cu0.1Fe2O4 as a magnetic feeder for electromagnetic transmitter application 2016
- Synthesis of task specific and reusable protic ionic liquids for one-pot multicomponent syntheses 2016
- The effect of different weight functions on calibrating corrosion measurements using KNN technique 2016
- The effects of salt, particle and pore size on the process of carbon dioxide hydrate formation: A critical review 2016
- The impact of airwave on tangential and normal components of electric field in seabed logging data 2016
- The performance of the IMSS2-5D procedure for simultaneous bounding of polynomial zeros 2016
- The preconditioned Gauss-Seidel iterative methods for solving Fredholm integral equations of the second kind 2016
- Topological characterization of nanocrystalline cellulose reinforced Poly (lactic acid) and Poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) bionanocomposites 2016
- Ultrasonic-assisted extraction of essential oil from Botryophora geniculate using different extracting solvents 2016
- An exploratory study on the user experience of foot reflexology therapy using reflexology artifacts 2015
- Analysis of CNT additives in porous layered thin film lubrication with electric double layer 2015
- Application of microscopy technology in mathematical modeling of hollow fiber membrane system 2015
- Application of microscopy technology in thermo-catalytic methane decomposition to hydrogen 2015
- Bayesian Islamic medication expert system (B-IMES) 2015
- Characterization of red mud-epoxy intumescent char using surface imaging and micro analysis 2015
- Compressive strength and interfacial transition zone of sugar cane bagasse ash concrete: A comparison to the established pozzolans 2015
- Correlation between compressive strength and ultrasonic pulse velocity of high strength concrete incorporating chopped basalt fibre 2015
- Determination of anisotropy and multimorphology in fly ash based geopolymers 2015
- Development of activated carbon derived from banana peel for CO2 removal 2015
- Effect of heat treatment on the physical properties of bimetallic doped catalyst, Cu-Ni/TiO2 2015
- Effect of photoanode thickness on electrochemical performance of dye sensitized solar cell 2015
- Effectiveness of dye sensitised solar cell under low light condition using wide band dye 2015
- Effects of electrode distance and nature of electrolyte on the diameter of titanium dioxide nanotube 2015
- Effects of mold geometry on fiber orientation of powder injection molded metal matrix composites 2015
- Effects on crystal structure of CZTS thin films owing to deionized water and sulfurization treatment 2015
- Electroencephalography data analysis by using discrete wavelet packet transform 2015
- Electron microscopy of Mg/TiO2 photocatalyst morphology for deep desulfurization of diesel 2015
- Fire performance, microstructure and thermal degradation of an epoxy based nano intumescent fire retardant coating for structural applications 2015
- Fire resistance properties of ceramic wool fiber reinforced intumescent coatings 2015
- Fitting a circular distribution based on nonnegative trigonometric sums for wind direction in Malaysia 2015
- Half-sweep successive over relaxation iterative method to solve two-point fuzzy boundary value problems 2015
- Improving the quality of graphene oxide prepared by Hummer’s method by using centrifugation 2015
- MEMS 3-DoF gyroscope design, modeling and simulation through equivalent circuit lumped parameter model 2015
- Microbiologically influenced corrosion (MIC) of storage tank bottom plates 2015
- Microscopic and magnetic properties of template assisted electrodeposited iron nanowires 2015
- Microscopic evolution of dielectric nanoparticles at different calcination temperatures synthesized via sol-gel auto-combustion 2015
- Microstructure characteristics of concrete incorporating metakaolin and PVA fibers and influence on the compressive strength 2015
- Nanostructure investigation of magnetic nanomaterial Ni0.5Zn0.3Cu0.2Fe2O4 synthesized by sol-gel method 2015
- Nanostructured and wide bandgap CdS:O thin films grown by reactive RF sputtering 2015
- Numerical and experimental investigation of direct solar crop dryer for farmers 2015
- Numerical investigation of gas separation in T-junction 2015
- Numerical solution of second order ODE directly by two point block backward differentiation formula 2015
- Removal of methylene blue from dye effluent using ageratum conyzoide leaf powder (ACLP) 2015
- Sauter mean diameter statistics of the starch dispersion atomized with hydraulic nozzle 2015
- Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding 2015
- Spatio-temporal droplet size statistics in developing spray of starchy solution 2015
- Surface characteristics of low temperature hybrid thermochemical treatment of AISI 316L 2015
- Synergistic effects of mica and wollastonite fillers on thermal performance of intumescent fire retardant coating 2015
- Temporal and spatial characterization of turbulent structures in liquid phase using POD technique 2015
- The efficiency of convergence rate for IMSS2-5D procedure 2015
- Thermal performance of glass fiber reinforced intumescent fire retardant coating for structural applications 2015
- Vital roles of nano silica in synthetic based mud for high temperature drilling operation 2015
- Co-precipitation synthesis of Cox2+Fe1−x2+Fe2O4 nanoparticles: Structural characterization and magnetic properties 2014
- Comparative assessment of rule-based and Bayes' theorem as inference engines in diagnosing symptoms for Islamic medication expert system 2014
- Distinguishing data with and without hydrocarbon in scaled tank experiments using spline interpolation and normalized mean square error 2014
- Effects of heat generation or absorption on mixed convection flow over a stretching porous wedge with convective boundary condition 2014
- Mathematical modelling for the drying method and smoothing drying rate using cubic spline for seaweed Kappaphycus Striatum variety Durian in a solar dryer 2014
- Numerical performance of AOR methods in solving first order composite closed Newton-Cotes quadrature algebraic equations 2014
- Numerical solutions for linear Fredholm integral equations of the second kind using 2-point half-sweep explicit group method 2014
- Superior model for fault tolerance computation in designing nano-sized circuit systems 2014
- The arithmetic mean iterative method for solving 2D Helmholtz equation 2014
- The thin section rock physics: Modeling and measurement of seismic wave velocity on the slice of carbonates 2014
- Valuing option on the maximum of two assets using improving modified Gauss-Seidel method 2014
- A study of PV/T collector with honeycomb heat exchanger 2013
- Application of quarter-sweep iteration for first order linear Fredholm integro-differential equations 2013
- Modification on interval symmetric single-step procedure ISS-5δ for bounding polynomial zeros simultaneously 2013
- Numerical solutions of two-point fuzzy boundary value problem using half-sweep alternating group explicit method 2013
- Solving first kind linear Fredholm integral equations with semi-smooth kernel using 2-point half-sweep block arithmetic mean method 2013
- Study on electrical power output of floating photovoltaic and conventional photovoltaic 2013
- Successive over relaxation method in solving two-point fuzzy boundary value problems 2013
- The interval zoro-symmetric single-step procedure IZSS2-5D for the simultaneous bounding of simple polynomial zeros 2013
- A new genetic fuzzy system approach for parameter estimation of ARIMA model 2012
- A review of TiO[sub 2] nanotube arrays for hydrogen sensing application 2012
- A review of TiO[sub 2] nanotube arrays for hydrogen sensing application 2012
- A review of nanostructured based radiation sensors for neutron 2012
- A review on nanowires as an alternative high density magnetic storage media 2012
- Adsorptive removal of Zn(II) ion from aqueous solution using rice husk-based activated carbon 2012
- Analysis of partially textured slider and journal bearing 2012
- Analysis of the organic liquid produced from catalytic cracking of crude palm oil in the presence of alumina supported catalysts 2012
- Calibration of Helmholtz Coils for the characterization of MEMS magnetic sensor using fluxgate magnetometer with DAS1 magnetic range data acquisition system 2012
- Combustion performance of cellulosic biomass in a gasifier-based cookstove 2012
- Comparison of multi-walled carbon nanotubes (MWNTs) and activated carbon (AC) as adsorbents in heavy metal adsorption 2012
- Denoising solar radiation data using Meyer wavelets 2012
- Design and simulation of mass-sensitive gas sensor based on CMOS-MEMS resonator 2012
- Design optimization of a fuzzy distributed generation (DG) system with multiple renewable energy sources 2012
- Development of two-axis sun tracking system 2012
- Effect of TEPA loading on the physicochemical properties of Si-MCM-41 by impregnation method 2012
- Effect of calcination method on the product distribution from catalytic degradation of polystyrene in the presence of 1% Pd/Al[sub 2]O[sub 3] catalysts 2012
- Effect of palm methyl ester-diesel blends performance and emission of a single-cylinder direct-injection diesel engine 2012
- Effect of water content in the formation of TiO[sub 2] aggregates on the performance of dye solar cells (DSCs) 2012
- Effect of zirconia on the physicochemical properties of Cu∕ZnO∕Al[sub 2]O[sub 3] catalyst 2012
- Effects of pH on physicochemical properties of nanocrystalline TiO[sub 2] synthesized via sol-gel hydrothermal method 2012
- Electromagnetic properties of polytetrafluoroethylene at microwave frequencies using finite element modeling waveguide adapter 2012
- Elemental and thermo-chemical analysis of oil palm fronds for biomass energy conversion 2012
- Emission of a compression ignition engine fuelled by diesel and imitated syngas 2012
- Experimental evaluation of automotive air-conditioning using HFC-134a and HC-134a 2012
- Experimental study on temperature profile of fixed – bed gasification of oil-palm fronds 2012
- Feasibility study of gasification oil palm fronds in an updraft gasifier 2012
- Gasification and effect of gasifying temperature on syngas quality and tar generation: A short review 2012
- IT vendor selection model by using structural equation model & analytical hierarchy process 2012
- Integrated photovoltaic (PV) monitoring system 2012
- Investigation of back surface fields effect on bifacial solar cells 2012
- Ionic liquid incorporating thiosalicylate for metal removal 2012
- Manipulation of operating configuration of cool air supply in buildings for reduction of cooling energy 2012
- Mathematical model of the seismic electromagnetic signals (SEMS) in non crystalline substances 2012
- Modeling of solubility of CO[sub 2] in 1-butylpyridinium bis(trifluoromethylsulfonyl)imide ionic liquid using UNIFAC 2012
- Modelling of diesel engine fuelled with biodiesel using engine simulation software 2012
- Musculoskeletal ultrasound image denoising using Daubechies wavelets 2012
- Nanofiltration of rhodium tris(triphenylphosphine) catalyst in ethyl acetate solution 2012
- New empirical correlations for sizing adiabatic capillary tubes in refrigeration systems 2012
- Oxidative desulfurization of dibenzothiophene from model oil using ionic liquids as extracting agent 2012
- PV based solar insolation measuring device 2012
- Parametric analysis of a double-effect steam absorption chiller 2012
- Polypyrrole thin film sensor base surface plasmon resonance for detection of Cu(II) and Fe(III) in aqueous solution 2012
- Prediction of biomass conversion process for oil palm fronds in a downdraft gasifier 2012
- Preparation of the spacer for narrow electrode gap configuration in ionization-based gas sensor 2012
- Reliability automation tool (RAT) for fault tolerance computation 2012
- Sea bed logging applications: ANOVA analysis for synthetic data from electromagnetic (EM) simulator 2012
- Self-aligned Cu electroplating of the front surface contact on silicon solar cells 2012
- Simulation and modeling the effect of temperature on resonant frequency of a CMOS-MEMS resonator 2012
- Simulation of photohydrogen production from water using Ni∕TiO[sub 2] 2012
- Simulation study on the effect of air distribution on the bed height and bubble formation in bubbling fluidization reactor 2012
- Solving deterministic non-linear programming problem using Hopfield artificial neural network and genetic programming techniques 2012
- Some special solutions of the rhomboidal five-body problem 2012
- Statistical properties of a Raman three-level atom interacting with a cavity field 2012
- Study on the physicochemical properties of Fe∕CeO[sub 2] catalysts as an effect from different iron loading 2012
- Swarm intelligence for multi-objective optimization of synthesis gas production 2012
- Synthesis and characterisations of Aliquat 336® and cetylpyridinium ionic liquids incorporated with sulfonate-based anions 2012
- Synthesis and characterization of Fe-Co catalyst prepared via reverse microemulsion method 2012
- Synthesis and characterization of molybdenum catalysts supported on γ-Al[sub 2]O[sub 3]-CeO[sub 2] composite oxides 2012
- Synthesis, characterization and application of Y[sub 3]Fe[sub 5]O[sub 12] nanocatalyst for green production of NH[sub 3] using magnetic induction method (MIM) 2012
- The effect of ambient temperature on a gas turbine performance in part load operation 2012
- The effect of spray angles of the injector on the power of compressed natural gas direct injection (CNGDI) engine 2012
- The solar hydrogen from sea water using Cu∕TiO[sub 2] 2012
- FUZZY LINEAR PROGRAMMING AND ITS APPLICATION IN HOME TEXTILE FIRM 2011
- Ionization Gas Sensor using Aligned Multiwalled Carbon Nanotubes Array 2011
- MAMDANI FUZZY SYSTEM FOR INDOOR AUTONOMOUS MOBILE ROBOT 2011
- Optimization of Rapid Thermal Firing on Silver Metal Contact for Crystalline Silicon Solar Cells 2011
- SPECKLE REDUCTION OF ULTRASOUND IMAGES OF BONE FRACTURE USING WAVELETS 2011
- UNDERWATER ACOUSTIC COMMUNICATIONS: RELATIONSHIP BETWEEN DATA PACKET SIZE, THROUGHPUT, BER, AND DISTANCE 2011
- A Practical Method for Analyzing Offshore Gas Compressor System Maintenance Data 2010
- ADOPTING PROBLEM-BASED LEARNING MODEL FOR AN ELECTRICAL ENGINEERING CURRICULUM 2010
- Effect Of Particle Dispersion On Thermal Conductivity Of Copper Powder Filled Epoxy Composites 2010
- Growth of Aligned Multiwalled Carbon Nanotubes (MWNTs) for Application as Field Emitters 2010
- The Effect of Catalyst Composition on the Characteristic of Bulk Single-Walled Carbon Nanotubes (SWNTs) 2010
- Wood Combustion Behaviour in a Fixed Bed Combustor 2010
- Measurement of Water Fraction in Liquid Hydro-Carbons Using ECT Sensor 2007