A

Al-Arabiat, D. and Ahmad, W.F.W. and Sarlan, A. (2016) Cloud computing role to address Mobile Learning barriers: An exploratory study of HEIs in Malaysia. In: UNSPECIFIED.

Aziz, N.S.A. and Ahmad, W.F.W. and Hashim, A.S. (2016) Development phase of mobile numerical application for children with autism: Math4Autism. In: UNSPECIFIED.

Alhussian, H. and Zakaria, N. and Abdulkadir, S.J. and Fageeri, S.O. (2016) Performance evaluation of real-time multiprocessor scheduling algorithms. In: UNSPECIFIED.

Al-Nuaimi, I.T.I. and Mahmood, A.K.B. and Mustapha, E.E. and Jebur, H.H. (2016) Measurement model of e-SQ dimensions and users' satisfaction in Malaysia IHL. In: UNSPECIFIED.

Ali, A.A. and Dominic, P.D.D. (2016) Organizational and individual factors impact on knowledge sharing practice: The association with cost reduction. In: UNSPECIFIED.

Abubakar, M.Y. and Jung, L.T. and Zakaria, M.N. and Younesy, A. and Abdel-Atyz, A.-H. (2016) New universal gate library for synthesizing reversible logic circuit using genetic programming. In: UNSPECIFIED.

Abdullahi, A.U. and Ahmad, R. and Zakaria, N.M. (2016) Big data: Performance profiling of Meteorological and Oceanographic data on Hive. In: UNSPECIFIED.

Alabool, H.M. and Mahmood, A.K. (2016) An infrastructure as a service integrity requirements: An interview study. In: UNSPECIFIED.

Abdulkadir, S.J. and Yong, S.-P. and Alhussian, H. (2016) An enhanced ELMAN-NARX hybrid model for FTSE Bursa Malaysia KLCI index forecasting. In: UNSPECIFIED.

Almomani, M.A. and Basri, S. and Mahmood, A.K.B. and Baashar, Y.M. (2016) An empirical analysis of software practices in Malaysian Small and Medium Enterprises. In: UNSPECIFIED.

Asadi, S. and Hussin, A.R.C. and Saedi, A. (2016) Decision makers intention for adoption of Green Information Technology. In: UNSPECIFIED.

Adnan, M.H.M. and Hassan, M.F. and Aziz, I. and Paputungan, I.V. (2016) Protocols for agent-based autonomous negotiations: A review. In: UNSPECIFIED.

Ariffin, M.M. and Ahmad, W.F.W. and Sulaiman, S. (2016) Investigating the educational effectiveness of gamebased learning for IT education. In: UNSPECIFIED.

Azahari, I.N.N.A. and Ahmad, W.F.W. and Jamaludin, Z. and Hashim, A.S. (2016) The design of mobile social application for children with autism. In: UNSPECIFIED.

Abdullah, M. and Bidin, N. and Yasin, M. (2016) Fiber optic vibration sensor using bifurcated plastic optical fiber. In: UNSPECIFIED.

Ashraf, M. and Narahari, M. and Muthuvalu, M.S. (2016) Mixed convection flow over a stretching porous wedge with Newtonian heating in the presence of heat generation or absorption. In: UNSPECIFIED.

Alqasem, B. and Yahya, N. and Soleimani, H. and Qureshi, S. and Irfan, M. and Rehman, Z.U. (2016) Experimental study on the effect of saturation magnetization of hematite nanocatalyst for green ammonia production. In: UNSPECIFIED.

Ahmed, M.G. and Dennis, J.-O. and Khir, M.-H. and Rabih, A. and Mian, M.U. (2016) Characterization of PolyMUMPs-based in-plane electromagnetic actuator. In: UNSPECIFIED.

Adil, M. and Zaid, H.M. and Chuan, L.K. and Latiff, N.R.A. (2016) Effect of CMC on the stability of ZnO nanofluid at high temperature and salinity. In: UNSPECIFIED.

Adjed, F. and Faye, I. and Ababsa, F. and Gardezi, S.J. and Dass, S.C. (2016) Classification of skin cancer images using local binary pattern and SVM classifier. In: UNSPECIFIED.

Awang, A. and Abbasi, U.F. (2016) Performance evaluation of cross-layer opportunistic MAC/routing with node's mobility for wireless body area networks. In: UNSPECIFIED.

Ahmed, A.A. and Saaid, I.M. and Akhir, N.A.M. and Rashedi, M. (2016) Influence of various cation valence, salinity, pH and temperature on bentonite swelling behaviour. In: UNSPECIFIED.

Ahmad, R. and Foroushan, P.C. and Peyvandi, S. (2016) A toolkit for the simulation of scheduling policy in desktop grid environment. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2016) A multi-domain framework for modelling educational games: Towards the effective development in perspective of learning theories. In: UNSPECIFIED.

Abdulkadir, S.J. and Yong, S.-P. (2016) Lorenz time-series analysis using a scaled hybrid model. In: UNSPECIFIED.

Abbas, M.A. and Ahmad, W.F.W. and Kalid, K.S. (2016) The effectiveness of semantic web based preschool cognitive skills tutoring system: An empirical study. In: UNSPECIFIED.

Alabool, H.M. and Mahmood, A.K. (2016) A novel evaluation model for improving trust level of infrastructure as a service. In: UNSPECIFIED.

Alkawsi, G.A. and Mahmood, A.K. and Baashar, Y.M. (2016) Factors influencing the adoption of cloud computing in SME: A systematic review. In: UNSPECIFIED.

Abdullahi, A.U. and Ahmad, R.B. and Zakaria, N.M. (2016) Proposed adaptive indexing for Hive. In: UNSPECIFIED.

Al-Nuaimi, I.T.I. and Mahmood, A.K.B. and Mustapha, E.E. and Jebur, H.H. (2016) Analysis of significant dimensions of e-service quality in Malaysian universities. In: UNSPECIFIED.

Aziz, N.S.A. and Ahmad, W.F.W. (2016) Proposed conceptual model of mobile numerical application for children with autism. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2016) A multi-domain framework for modelling educational games: Towards the effective development in perspective of game environment. In: UNSPECIFIED.

Alsaih, K. and Lemaître, G. and Vall, J.M. and Rastgoo, M. and Sidibé, D. and Wong, T.Y. and Lamoureux, E. and Milea, D. and Cheung, C.Y. and Mériaudeau, F. (2016) Classification of SD-OCT volumes with multi pyramids, LBP and HOG descriptors: Application to DME detections. In: UNSPECIFIED.

Al-Shargie, F. and Tang, T.B. and Kiguchi, M. (2016) Mental stress grading based on fNIRS signals. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Amin, H.U. and Kamel, N. and Reza, F. (2016) Classification of cognitive and resting states of the brain using EEG features. In: UNSPECIFIED.

Alias, M.N. and Muhammad, M.M. and Wan Yusof, K. and Ul Mustafa, M.R. and Ab Ghani, A. (2016) Hydraulic Analysis of Biochannels for Sustainable Urban Drainage Systems. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.B. (2016) A Framework for Coordination Process into Construction Projects. In: UNSPECIFIED.

Abualqumboz, M.S. and Mohammed, N.I. and Malakahmad, A. and Nazif, A.N. and Albattniji, A.T. (2016) Pollution of PM10 in an underground enclosed loading dock in Malaysia. In: UNSPECIFIED.

Abunowara, M. and Bustam, M.A. and Sufian, S. and Eldemerdash, U. (2016) Characterization of Malaysian coals for carbon dioxide sequestration. In: UNSPECIFIED.

Abunowara, M. and Bustam, M.A. and Sufian, S. and Eldemerdash, U. (2016) Measurement techniques for carbon dioxide sorption capacity on various coal samples: Critical review. In: UNSPECIFIED.

Abbasi, I. and Ali, S.S.A. and Ibrahim, R. and Adil, S.H. and Ovinis, M. (2016) U-model based depth control of underwater glider. In: UNSPECIFIED.

Awais, M. and Faye, I. and Walter, N. and Saad, M.N. (2016) Automatic removal of auto fluorescence device part using circular hough transform. In: UNSPECIFIED.

Al-Shargie, F. and Tang, T.B. and Badruddin, N. and Kiguchi, M. (2016) Simultaneous measurement of EEG-fNIRS in classifying and localizing brain activation to mental stress. In: UNSPECIFIED.

Ali, A.S.O. and Asirvadam, V.S. and Malik, A.S. and Aziz, A. and Dass, S.C. (2016) Combined geometric and texture features for face recognition. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Amin, H.U. and Kamel, N. and Qayyum, A. and Reza, F. (2016) Nonlinear features based classification of active and resting states of human brain using EEG. In: UNSPECIFIED.

Almahasneh, H. and Kamel, N. and Walter, N. and Malik, A.S. (2016) EEG-based brain functional connectivity during distracted driving. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. (2016) EEG-fMRI combination for better understanding of brain functions: Pros and cons. In: UNSPECIFIED.

Alashloo, S.Y.M. and Ghosh, D.P. and Bashir, Y. and Yusoff, W.I.W. (2016) A comparison on initial-value ray tracing and fast marching eikonal solver for VTI traveltime computing. In: UNSPECIFIED.

Adil, S.H. and Raza, K. and Ahmed, U. and Ali, S.S.A. and Hashmani, M. (2016) Cloud task scheduling using nature inspired meta-heuristic algorithm. In: UNSPECIFIED.

Al-Dujaili, A. and Hiung, L.H. and Tan, S. (2016) ASH1: A stack-based input/ output processor for USB operations. In: UNSPECIFIED.

Abbasi, A. and Hashim, F.M. (2016) Prediction of hydrate formation conditions in subsea pipeline with genetic algorithm. In: UNSPECIFIED.

Abidin, M.N.B.Z. and Ali, S.S.A. and Adil, S.H. (2016) 3-degree-of-freedom real-time human hand following robot arm using visual feedback. In: UNSPECIFIED.

Aalsalem, M.Y. and Khan, W.Z. and Saad, N.M. (2016) Detecting clones in wireless sensor networks using constrained random walk. In: UNSPECIFIED.

Abbas, A.H. and Sulaiman, S.A. and Aris, M.S. (2016) An experimental study on axial temperature distribution of combustion of dewatered poultry sludge in fluidized bed combustor. In: UNSPECIFIED.

Almed, H.A.A. and Ku Amir, K.N.B. and Bin Wan Zulkifli, W.A.Z.A. and Ramli, M.N.B. and Mohd Salleh, M.F.B. and Sakidin, H.B. (2016) Design and development of green eco-house. In: UNSPECIFIED.

Ali, B.H. and Gilani, S.I. and Al-Kayiem, H.H. (2016) Mathematical modeling of a developed central receiver based on evacuated solar tubes. In: UNSPECIFIED.

Assadi, M.K. and Gilani, S.I. and Yen, T.C.J. (2016) DESIGN a solar hybrid air conditioning compressor system. In: UNSPECIFIED.

Assadi, M.K. and Shamshirgaran, S.R. and Rad, S.D. (2016) The effect of key parameters on the design of an optimized caes power plant. In: UNSPECIFIED.

Amir, N. and Majid, A.A.A. and Ahmad, F. (2016) Effects of hybrid fibre reinforcement on fire resistance performance and char morphology of intumescent coating. In: UNSPECIFIED.

Amin, F.B.M. and Mahmood, A.K. (2016) Review of Plug-Based Load Energy Management Systems (PLEMS) for energy and comfort management of buildings. In: UNSPECIFIED.

Adeeyo, Y.A. and Awang, M.B. (2016) Gibbs excess energy model to predict phase behaviour of brine/oil/surfactant mixtures for Chemical Enhanced Oil Recovery CEOR methods. In: UNSPECIFIED.

Alashloo, S.Y.M. and Ghosh, D. and Bashir, Y. (2016) Application of VTI fast marching eikonal solver to improve seismic imaging. In: UNSPECIFIED.

Al-Mudhafar, W.J. and Al-Khazraji, A.K. (2016) Non-parametric adaptive regression splines for multisource permeability modeling in a sandstone oil reservoir. In: UNSPECIFIED.

Azmi, N. and Rashidi, N.A. and Yusup, S. and Sabil, K.M. (2016) Addition of water in calcium based adsorbent for CO2 adsorption: Experimental and isotherm modelling studies. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.A. and Ahmad, F. and Aslam, M. (2016) Rapid tooling for powder injection moulding process. In: UNSPECIFIED.

Ali, S. and Shariff, A.M. (2016) Ahp-based conceptual model for selection of key elements for safety culture using smart criteria. In: UNSPECIFIED.

Ani, M.N.C. and Abdul Azid, I. and Kamarudin, S. (2016) Solving quality issues in automotive component manufacturing environment by utilizing six sigma DMAIC approach and quality tools. In: UNSPECIFIED.

Ali, S.S.A. and Kannan, R. and Kumar, M.S. (2016) Exploration of Modulation Index in Multi-level Inverter using Particle Swarm Optimization Algorithm. In: UNSPECIFIED.

Addi, M.M. and Abidin, N.A.Z. and Daud, S.A. (2016) Development of a portable phototherapy garment (PPG) for jaundice treatment. In: UNSPECIFIED.

Azizan, M.T. and Jais, K.A. and Sa'Aid, M.H. and Ameen, M. and Shahudin, A.F. and Yasir, M. and Yusup, S. and Ramli, A. (2016) Thermodynamic Equilibrium Analysis of Triolein Hydrodeoxygenation for Green Diesel Production. In: UNSPECIFIED.

Aleem, W. and Mellon, N. (2016) Experimental Study on the Effect of Parameters on Sedimentation and Coalescing Profiles in Liquid-liquid Batch Settler. In: UNSPECIFIED.

Alhassan, F.H. and Uemura, Y. (2016) Isopropanolysis of Cottonseed Oil to Biodiesel via Potassium Hydroxide Catalyst. In: UNSPECIFIED.

Abdullah, M.Z. and Qasim, A. (2016) Parametric Analysis of Carbon Dioxide Adsorption on Nanoporous Activated Carbon Using Computational Approach. In: UNSPECIFIED.

Abdullah, M.Z.B. and Ahmad, M.A. and Abdullah, A.N. and Othman, M.H. and Hussain, P. and Zainuddin, A. (2016) Metal Release of Multilayer Coatings by Physical Vapour Deposition (PVD). In: UNSPECIFIED.

Ayoub, M. and Ullah, S. and Inayat, A. and Bhat, A.H. and Hailegiorgis, S.M. (2016) Process Optimization for Biodiesel Production from Waste Frying Oil over Montmorillonite Clay K-30. In: UNSPECIFIED.

Ameen, M. and Azizan, M.T. and Ramli, A. and Yusup, S. and Yasir, M. (2016) Physicochemical Properties of Ni-Mo/γ-Al2O3 Catalysts Synthesized via Sonochemical Method. In: UNSPECIFIED.

Azeem, B. and KuShaari, K. and Man, Z. (2016) Effect of Coating Thickness on Release Characteristics of Controlled Release Urea Produced in Fluidized Bed Using Waterborne Starch Biopolymer as Coating Material. In: UNSPECIFIED.

Alias, N.S. and Ridha, S. and Yerikania, U. (2016) Effect of Chemical EOR on Class G Oilwell Cement Integrity under Elevated Conditions. In: UNSPECIFIED.

Aziz, N.F.A. and Shariff, A.M. and Shaikh, M.S. and Keong, L.K. and Garg, S. and Aftab, A. (2016) Physical Properties of Aqueous Sodium Salt Solution of α-Methylalanine (Na-AMALA). In: UNSPECIFIED.

Ahmad, T. and Irfan, M. and Bhattacharjee, S. (2016) Parametric Study on Gold Nanoparticle Synthesis Using Aqueous Elaise Guineensis (Oil palm) Leaf Extract: Effect of Precursor Concentration. In: UNSPECIFIED.

Alnarabiji, M.S. and Yahya, N. and Shafie, A. and Solemani, H. and Chandran, K. and Hamid, S.B.A. and Azizi, K. (2016) The Influence of Hydrophobic Multiwall Carbon Nanotubes Concentration on Enhanced Oil Recovery. In: UNSPECIFIED.

Abunowara, M. and Bustam, M.A. and Sufian, S. and Eldemerdash, U. (2016) Description of Carbon Dioxide Adsorption and Desorption onto Malaysian Coals under Subcritical Condition. In: UNSPECIFIED.

Arogundade, A.I. and Ahmad, F. and Bhat, A.H. and Gillani, Q.F. and Megat-Yusoff, P.S.M.B. (2016) Investigating the Synergistic Effect of Bauxsol� in an Epoxy Intumescent Coating System. In: UNSPECIFIED.

Azam, N.A.M. and Uemura, Y. and Kusakabe, K. and Bustam, M.A. (2016) Biodiesel Production from Palm Oil Using Micro Tube Reactors: Effects of Catalyst Concentration and Residence Time. In: UNSPECIFIED.

Abidin, M.Z. and Rusli, R. and Shariff, A.M. (2016) Technique for Order Performance by Similarity to Ideal Solution (TOPSIS)-entropy Methodology for Inherent Safety Design Decision Making Tool. In: UNSPECIFIED.

Akilu, S. and Sharma, K.V. and Baheta, A.T. and Azman, M.S.M. and Bhaskoro, P.T. (2016) Temperature Dependent Properties of Silicon Carbide Nanofluid in Binary Mixtures of Glycerol-Ethylene Glycol. In: UNSPECIFIED.

Ali, B. and Yusup, S. and Quitain, A.T. and Kamil, R.N.M. and Sumigawa, Y. and Ammar, M. and Kida, T. (2016) Pretreatment and Bentonite-based Catalyzed Conversion of Palm-rubber Seed Oil Blends to Biodiesel. In: UNSPECIFIED.

Ali, W.N.N.W. and Sufian, S. and Abdullah, M.Z. (2016) Green Functionalization: Comparison of Different Carbonaceous Materials. In: UNSPECIFIED.

Azahari, M.I.H. and Zabiri, H. and Isa, F. and Tuffa, L.D. and Shariff, A.M. (2016) CO2 Absorption from Natural Gas: Dynamic Study & Simulation. In: UNSPECIFIED.

Anjum, H. and Murugesan, T. (2016) Effect of Functionalization Condition on Characterization of Carbonaceous Adsorbent. In: UNSPECIFIED.

Ahmad, T. and Irfan, M. and Bustam, M.A. and Bhattacharjee, S. (2016) Effect of Reaction Time on Green Synthesis of Gold Nanoparticles by Using Aqueous Extract of Elaise Guineensis (Oil Palm Leaves). In: UNSPECIFIED.

Ammar, M. and Mutalib, M.I.A. and Yusup, S. and Inayat, A. and Shahbaz, M. and Ali, B. (2016) Influence of Effective Parameters on Product Gas Ratios in Sorption Enhanced Gasification. In: UNSPECIFIED.

Azmee, N.M. and Nuruddin, M.F. (2016) Effect of high volume fly ash in ultra high performance concrete on compressive strength. In: UNSPECIFIED.

Ahmed, M.O. and Musaad, A. (2016) Effects of mooring lines and water depth parameters on the dynamic motion of a turret-moored FPSO. In: UNSPECIFIED.

Al-Ghuribi, T.M.Q. and Liew, M.S. and Zawawi, N.A. and Ayoub, M.A. (2016) Decommissioning decision criteria for offshore installations and well abandonment. In: UNSPECIFIED.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2016) Nano silica modified roller compacted rubbercrete � an overview. In: UNSPECIFIED.

Al-Mattarneh, H.M. and Ismail, R.M.A. and Nuruddin, M.F. and Shafiq, N. and Dahim, M.A. (2016) Characterization of Pb and Cd contaminated sandy soil by dielectric means. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A. (2016) Coordination process in construction projects management. In: UNSPECIFIED.

Ayilara, A.Q. and Wee, T. and Liew, M.S. (2016) Application of new codes for fatigue assessment of older bridges. In: UNSPECIFIED.

Al-Yacouby, A.M. and Kurian, V.J. and Liew, M.S. and Idichandy, V.G. (2016) VIV of four cylinders in side by side configurations � experimental and CFD simulations. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A. (2016) Attributes of coordination process in construction projects. In: UNSPECIFIED.

Ahmad, R. and Matori, A.N. (2016) Prioritizing the criteria for urban green space using AHP-multiple criteria decision model. In: UNSPECIFIED.

Abd Manan, T.S. and Malakahmad, A. and Sivapalan, S. (2016) Toxicological studies of Perak River water using biological assay. In: UNSPECIFIED.

Ab Latip, A.S. and Matori, A.N. and Perissin, D. (2016) Monitoring deformation of liquefied natural gas terminal with persistent scatterer interferometry. In: UNSPECIFIED.

Awang, A. and Mohammed, B.S. and Mustafa, M.R. (2016) Mix design proportion for strength prediction of rubbercrete using artificial neural network. In: UNSPECIFIED.

Amran, N.A. and Jusoh, M. (2016) Effect of coolant temperature and circulation flowrate on the performance of a vertical finned crystallizer. In: UNSPECIFIED.

Ahmad, N.R. and Harahap, I.S.H. (2016) The compression behaviour of marine clays in Malaysia. In: UNSPECIFIED.

Al-Khazraji, A.K. and Awang, M.B. (2016) Evaluation of miscible CO2-flooding to improve oil recovery in a clastic heterogeneous reservoir. In: UNSPECIFIED.

Al-Khazraji, A.K. and Awang, M.B. (2016) Evaluation of miscible CO2-flooding to improve oil recovery in a clastic heterogeneous reservoir. In: UNSPECIFIED.

Ahmed, M.O. and Yenduri, A. and John, K.V. (2016) Effect of mooring line pretensions on the dynamic responses of truss spar platforms. In: UNSPECIFIED.

Al-Shargie, F.M. and Tang, T.B. and Badruddin, N. and Kiguchi, M. (2016) Mental stress quantification using EEG signals. In: UNSPECIFIED.

B

Baashar, Y.M. and Mahomood, A.K. and Almomani, M.A. and Alkawsi, G.A. (2016) Customer relationship management (CRM) in healthcare organization: A review of ten years of research. In: UNSPECIFIED.

Bhattacharjee, S. and Rahim, L.B.A. and Aziz, I.B.A. (2016) A security scheme to minimize information loss during big data transmission over the internet. In: UNSPECIFIED.

Basri, S. and Zaharin, M.S. and Mahamad, S. and Hashim, A.S. and Sarlan, A. (2016) Lightning distance mobile application lightning distance calculator. In: UNSPECIFIED.

Besrour, S. and Rahim, L.B.A. and Dominic, P.D.D. (2016) A quantitative study to identify critical requirement engineering challenges in the context of small and medium software enterprise. In: UNSPECIFIED.

Besrour, S. and Rahim, L.B.A. and Dominic, P.D.D. (2016) Investigating requirement engineering techniques in the context of small and medium software enterprises. In: UNSPECIFIED.

Babaei, M. and Al-Jemeli, M. and Avazpour, I. (2016) UGI: A multi-dimensional ultrasonic-based interaction approach. In: UNSPECIFIED.

Baig, M.K. and Soleimani, H. and Yahya, N. (2016) Domain wall motion and Barkhausen effect in magnetic nanoparticles for EOR applications. In: UNSPECIFIED.

Bel, T. and Ulku, G. and Kizilcan, N. and Cimenoglu, H. and Yahya, N. and Baydogan, N. (2016) Production of microencapsulate glycidyl methacrylate with melamine formaldehyde resin shell materials. In: UNSPECIFIED.

Bade, L.A. and Dennis, J.O. and Khir, M.H.M. and Wen, W.P. (2016) RF-MEMS tunable interdigitated capacitor and fixed spiral inductor for band pass filter applications. In: UNSPECIFIED.

Batcha, S.R. and Sakidin, H. and Ahmad, A. (2016) Simpler Neill mapping function using nonlinear curve fitting method. In: UNSPECIFIED.

Bhat, A.H. and Dasan, Y.K. and Khan, I.U. and Ahmad, F. and Ayoub, M. (2016) Topological characterization of nanocrystalline cellulose reinforced Poly (lactic acid) and Poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) bionanocomposites. In: UNSPECIFIED.

Bhattacharjee, S. and Rahim, L.B.A. and Aziz, I.B.A. (2016) Hiding of compressed bit stream into audio file to enhance the confidentiality and portability of a data transmission system. In: UNSPECIFIED.

Bhaskar, P.K. and Yong, S.-P. and Jung, L.T. (2016) Enhanced and effective parallel optical flow method for vehicle detection and tracking. In: UNSPECIFIED.

Besrour, S. and Bin Ab Rahim, L. and Dominic, P.D.D. (2016) The study of the relation between requirement engineering techniques and challenges in software industry. In: UNSPECIFIED.

Binti Mohamad Sani, N.S. and Binti Arshad, N.I. (2016) Towards a framework to measure knowledge transfer in organizations. In: UNSPECIFIED.

Bade, L.A. and Dennis, J.O. and Khir, M.H.M. and Wen, W.P. (2016) Modeling and simulation of tunable band-pass filter based on metal-mumps. In: UNSPECIFIED.

Bashir, Y. and Ghosh, D.P. and Alashloo, S.Y.M. and Sum, C.W. (2016) Enhancement in Seismic Imaging using Diffraction Studies and Hybrid Traveltime Technique for PSDM. In: UNSPECIFIED.

Batcha, S.R. and Sakidin, H. and Ahmad, A. (2016) Simpler hydrostatics component of UNBabc mapping function using nonlinear curve fitting method. In: UNSPECIFIED.

Babangida, N.M. and Ul Mustafa, M.R. and Yusuf, K.W. and Isa, M.H. and Baig, I. (2016) Evaluation of low degree polynomial kernel support vector machines for modelling Pore-water pressure responses. In: UNSPECIFIED.

Bashiri, M. and Mumtaz, W. and Malik, A.S. and Waqar, K. (2016) EEG-based brain connectivity analysis of working memory and attention. In: UNSPECIFIED.

Bashir, Y. and Ghosh, D.P. and Alashloo, S.Y.M. and Sum, C.W. (2016) Effect of Frequency and Migration Aperture on Seismic Diffraction Imaging. In: UNSPECIFIED.

Behrani, P. and Nizam, A.S. (2016) Association between psychosocial factors with upper extremity musculoskeletal disorders: An academic review. In: UNSPECIFIED.

bt Alauddin, N.H. and Abass, A. and Mr Akhir, N.A. (2016) Investigation of Propagation and Permeability Modification of Grafted Bentonite Particles in Porous Media. In: UNSPECIFIED.

Burhani, N.R.A. and Muhammad, M. and Mokhtar, A.A. and Ismail, M.C. (2016) Application of logistic regression in resolving influential risk factors subject to corrosion under insulation. In: UNSPECIFIED.

Baharuddin, S.H. and Mustahil, N.A. and Abdullah, A.A. and Sivapragasam, M. and Moniruzzaman, M. (2016) Ecotoxicity study of amino acid ionic liquids towards danio rerio fish: Effect of cations. In: UNSPECIFIED.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Khatani, M. and Hanaei, H. (2016) Effect of preparation parameters on optical properties of Cu and Ni doped TiO2 photocatalyst. In: UNSPECIFIED.

Bavoh, C.B. and Lal, B. and Keong, L.K. and Jasamai, M.B. and Idress, M.B. (2016) Synergic Kinetic Inhibition Effect of EMIM-Cl + PVP on CO2 Hydrate Formation. In: UNSPECIFIED.

Bokhari, A. and Yusup, S. and Chuah, L.F. and Kamil, R.N.M. (2016) Vacuum Distilled Post Blend Crude Palm and Rubber Seed Oil Methyl Esters: Optimisation and Parametric Studies. In: UNSPECIFIED.

Borhan, A. and Abdullah, N.A. and Rashidi, N.A. and Taha, M.F. (2016) Removal of Cu2+ and Zn2+ from Single Metal Aqueous Solution Using Rubber-Seed Shell Based Activated Carbon. In: UNSPECIFIED.

Billah, A.F. and Mustaffa, Z. and Albarody, B.T.M.B. (2016) Numerical analysis of the composite �ball-and-socket� carcass design for unbonded flexible pipe. In: UNSPECIFIED.

Babangida, N.M. and Yusof, K.W. and Mustafa, M.R. and Isa, M.H. (2016) Comparison of support vector machines kernel functions for pore-water pressure modeling. In: UNSPECIFIED.

Bala, N. and Kamaruddin, I. (2016) Physical and storage stability properties of linear low density polyethylene at optimum content. In: UNSPECIFIED.

Bataee, M. and Irawan, S. and Ridha, S. and Hematpour, H. and Hamdi, Z. (2016) Effects of injection pressure on wellbore stress using flow-stress coupling method. In: UNSPECIFIED.

C

Chouhan, M. and Hasbullah, H. (2016) Adaptive detection technique for Cache-based Side Channel Attack using Bloom Filter for secure cloud. In: UNSPECIFIED.

Chern-Tong, H. and Aziz, I.B.A. (2016) A corrosion prediction model for oil and gas pipeline using CMARPGA. In: UNSPECIFIED.

Chandran, K. and Sinnathambi, C.M. (2016) Rheological behavior on treated Malaysian crude oil. In: UNSPECIFIED.

Cheong, L.Y. and Ismail, A. and Tammam, M. and Yahya, N. (2016) Reliability of the single folding potential to describe the elastic scattering data of the p+43 Ca system. In: UNSPECIFIED.

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2016) Internal model control for industrial wireless plant subject to measured round trip delays. In: UNSPECIFIED.

Chandrakasan, G. and Ovinis, M. (2016) Investigation on thermocompression bonding using lead free sinterable paste and high lead solder paste for power QFN application. In: UNSPECIFIED.

Caesarendra, W. and Ariyanto, M. and Lexon, S.U. and Pasmanasari, E.D. and Chang, C.R. and Setiawan, J.D. (2016) EEG based pattern recognition method for classification of different mental tasking: Preliminary study for stroke survivors in Indonesia. In: UNSPECIFIED.

Chung, T.D. and Asirvadam, V.S. and Ibrahim, R.B. and Saad, N.B. and Hassan, S.M. (2016) Analyzing WirelessHART High-level Data Link Control frame payload. In: UNSPECIFIED.

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. and Herman, A.P. (2016) Effect of temperature on catalytic steam co-gasification of rubber seed shells and plastic HDPE residues. In: UNSPECIFIED.

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2016) Energy Consumption Analysis of WirelessHART Adaptor for Industrial Wireless Sensor Actuator Network. In: UNSPECIFIED.

Chemat, F. and Gnanasundaram, N. and Shariff, A.M. and Murugesan, T. (2016) Effect of L-arginine on Solubility of CO2 in Choline Chloride + Glycerol Based Deep Eutectic Solvents. In: UNSPECIFIED.

Cheah, K.W. and Yusup, S. and Chuah, L.F. and Bokhari, A. (2016) Physio-chemical Studies of Locally Sourced Non-Edible Oil: Prospective Feedstock for Renewable Diesel Production in Malaysia. In: UNSPECIFIED.

Chew, T.L. and Ahmad, A.L. (2016) Gas Permeation Properties of Modified SAPO-34 Zeolite Membranes. In: UNSPECIFIED.

Chai, K.-L. and Chan, L.-K. and Chee, C.-H. (2016) Developing business analytics framework for small and medium enterprises (SMEs). In: UNSPECIFIED.

D

Dominic, D.D. and Hina, S. (2016) Engaging university students in hands on learning practices and social media collaboration. In: UNSPECIFIED.

Djuraev, U. and Jufar, S.R. and Vasant, P. (2016) Numerical Study of Frequency-dependent Seismoelectric Coupling in Partially-saturated Porous Media. In: UNSPECIFIED.

Dass, S.C. and Lee, J. and Lee, K. (2016) Bayesian inference using two-stage Laplace approximation for differential equation models. In: UNSPECIFIED.

Dahy, E. and Shafie, A. and Yahya, N. (2016) Magnetic field response of a new antenna design in planarly homogeneous layered media. In: UNSPECIFIED.

Dahalan, A.A. and Muthuvalu, M.S. and Sulaiman, J. (2016) QSAGE iterative method applied to fuzzy parabolic equation. In: UNSPECIFIED.

Danaei, S. and Hermana, M. and Rafek, A.G. and Ghosh, D. (2016) Time-lapse seismic feasibility modelling and AVO sensitivity analysis for quantification of pressure-saturation effects in fields located in Malaysian basins. In: UNSPECIFIED.

E

Elsiti, N.M. and Noordin, M.Y. and Alkali, A.U. (2016) Fabrication of high aspect ratio micro electrode by using EDM. In: UNSPECIFIED.

Egambaram, A. and Badruddin, N. and Asirvadam, V.S. and Begum, T. (2016) Comparison of envelope interpolation techniques in Empirical Mode Decomposition (EMD) for eyeblink artifact removal from EEG. In: UNSPECIFIED.

Emani, S. and Ramasamy, M. and Shaari, K.Z.B.K. (2016) Effect of Shear Stress on Crude Oil Fouling in a Heat Exchanger Tube Through CFD Simulations. In: UNSPECIFIED.

Ezechi, E.H. and Kutty, S.R.M. and Isa, M.H. and Malakahmad, A. and Olisa, E. (2016) Influence of organic loading rate on a submerged two-stage integrated bioreactor without external carbon addition. In: UNSPECIFIED.

F

Fageeri, S.O. and Ahmad, R. and Alhussian, H. (2016) A performance analysis of association rule mining algorithms. In: UNSPECIFIED.

Foong, O.-M. and Hong, K.-W. and Yong, S.-P. (2016) Droopy Mouth Detection Model in stroke warning. In: UNSPECIFIED.

Fadzillah, F.M. and Arshad, N.I. (2016) Evaluating the impact of non-medical m-health application: Towards development of a framework. In: UNSPECIFIED.

Farooqi, A.S. and Demong, A. and Sanaullah, K. and Sulaiman, S.A. and Rigit, A.R. and Saleh, S.F. and Gillani, S.J. and Khan, A. (2016) Effects of Swirl Bubble Injection on Mass Transfer and Hydrodynamics for Bubbly Flow Reactors: A Concept Paper. In: UNSPECIFIED.

Foong, O.-M. and Yong, S.-P. and Jaid, F.-A. (2016) Text Summarization Using Latent Semantic Analysis Model in Mobile Android Platform. In: UNSPECIFIED.

Fentaye, A.D. and Gilani, S.I.U.-H. and Baheta, A.T. (2016) Gas turbine gas path diagnostics: A review. In: UNSPECIFIED.

Fauzi, A. and Nuruddin, M.F. and Malkawi, A.B. and Abdullah, M.M.A.B. (2016) Study of Fly Ash Characterization as a Cementitious Material. In: UNSPECIFIED.

Farnam, M. and Mukhtar, H. and Shariff, A. (2016) Analysis of the Influence of CMS Variable Percentages on Pure PES Membrane Gas Separation Performance. In: UNSPECIFIED.

Fayaz, F. and Danh, H.T. and Nguyen-Huy, C. and Vu, K.B. and Abdullah, B. and Vo, D.-V.N. (2016) Promotional Effect of Ce-dopant on Al2O3-supported Co Catalysts for Syngas Production via CO2 Reforming of Ethanol. In: UNSPECIFIED.

Fazli, H. and Teo, W. (2016) FRP shear contribution in externally bonded reinforced concrete beams with stirrups. In: UNSPECIFIED.

Farhan, S.A. and Shafiq, N. and Azizli, K.A.M. and Soon, F.K. and Jie, L.C. (2016) Optimization of residential roof design using system dynamics and building information modelling. In: UNSPECIFIED.

G

Gilal, A.R. and Jaafar, J. and Basri, S. and Omar, M. and Abro, A. (2016) Impact of software team composition methodology on the personality preferences of Malaysian students. In: UNSPECIFIED.

Ghaedi, H. and Ayoub, M. and Bhat, A.H. and Mahmood, S.M. and Akbari, S. and Murshid, G. (2016) The effects of salt, particle and pore size on the process of carbon dioxide hydrate formation: A critical review. In: UNSPECIFIED.

Ghani, N.A. and Sairi, N.A. and Mat, A.N.C. and Khoubnasabjafari, M. and Jouyban, A. (2016) Density and molar volumes of imidazolium-based ionic liquid mixtures and prediction by the Jouyban-Acree model. In: UNSPECIFIED.

Guan, B.H. and Zahari, M.H. and Chuan, L.K. (2016) Structural and magnetic properties of Ni1-xZnxFe2O4 synthesized through the sol-gel method. In: UNSPECIFIED.

Gilal, A.R. and Jaafar, J. and Basri, S. and Omar, M. and Tunio, M.Z. (2016) Making programmer suitable for team-leader: Software team composition based on personality types. In: UNSPECIFIED.

Goh, C.M. and Saad, N.M. and Shahzad, A. and Malik, A.S. (2016) Near-infrared vessels image enhancement using segmentation and fusion technique. In: UNSPECIFIED.

Gillani, Q.F. and Ahmad, F. and Mutalib, M.I.A. and Melor, P.S. and Ullah, S. and Arogundade, A. (2016) Effect of Dolomite Clay on Thermal Performance and Char Morphology of Expandable Graphite Based Intumescent Fire Retardant Coatings. In: UNSPECIFIED.

Gunasegran, S. and Azarpour, A. (2016) Numerical Analysis of Influential Parameters on the Performance of Vertical-Cylindrical Refinery Furnaces. In: UNSPECIFIED.

Gardezi, S.S.S. and Shafiq, N. and Nuruddin, M.F. and Zawawi, N.A. and Khamidi, F.B. (2016) Factors affecting the embodied carbon footprint potential�Assessment of conventional Malaysian housing habitat. In: UNSPECIFIED.

Gupta, S. and Teh, H.M. and Hashim, A.M. and Sulaiman, R.B.R. (2016) Wave transmission characteristics of sand containers used as submerged breakwaters. In: UNSPECIFIED.

H

Hasan, M.H. and Jaafar, J. and Aziz, I.A. and Rahim, L.A.B. (2016) A review on a high performance computing-based interval fuzzy type-2 model for web services' QoS evaluation. In: UNSPECIFIED.

Hong, K.W. and Foong, O.-M. and Low, T.J. (2016) Challenges in quantum key distribution: A review. In: UNSPECIFIED.

Hina, S. and Dominic, D.D. (2016) Information security policies: Investigation of compliance in universities. In: UNSPECIFIED.

Hassan, S. and Jaafar, J. and Khanesar, M.A. and Khosravi, A. (2016) Artificial bee colony optimization of interval type-2 fuzzy extreme learning system for chaotic data. In: UNSPECIFIED.

Hasan, M.H. and Jaafar, J. and Hassan, M.F. (2016) Fuzzy C-Means and two clusters' centers method for generating interval type-2 membership function. In: UNSPECIFIED.

Haruna, A.A. and Jung, L.T. and Zakaria, M.N. and Haron, N.S. (2016) Green scheduling algorithm for a computational grid environment. In: UNSPECIFIED.

Hashim, A.S. and Yusoff, M.F.M. and Sarlan, A. and Mahamad, S. and Basri, S. (2016) Development of MyHomePharmacy: A personalized family medicine management. In: UNSPECIFIED.

Hasan, M.L.B. and Mohamed Khalid, M.N.B. (2016) Preparation of Nano-Scale Biopolymer Extracted from Coconut Residue and Its Performance as Drag Reducing Agent (DRA). In: UNSPECIFIED.

Hashim, A.M. and Shahruzzaman, D.B. (2016) Effectiveness of Mangrove Forest as Coastal Protection along the West Coast of Northern Peninsular Malaysia. In: UNSPECIFIED.

Hamid, H.H. and Zabidi, N.A.M. and Gholami, Z. and Shaharun, M.S. (2016) Comparison of preparation techniques for CoFeNb/CNTs catalyst. In: UNSPECIFIED.

Hasni, M.M. and Majid, Z.A. and Senu, N. and Rajalingam, S. and Daud, H. and Daud, M.A. (2016) Direct fifth order block method for solving second order Neumann and singular perturbed boundary value problem. In: UNSPECIFIED.

Hussain, A. and Faye, I. and Muthuvalu, M.S. (2016) Performance analysis of successive over relaxation method for solving glioma growth model. In: UNSPECIFIED.

Habibullah and Wilfred, C.D. (2016) Ultrasonic-assisted extraction of essential oil from Botryophora geniculate using different extracting solvents. In: UNSPECIFIED.

Halim, N.S.A. and Zabidi, N.A.M. and Tasfy, S.F.H. and Shaharun, M.S. (2016) Morphology and performance of Cu/ZnO based catalyst: Comparison between Al2O3 and SiC support. In: UNSPECIFIED.

Hamed, Y. and Shafie, A. and Mustaffa, Z.B. and Idris, N.R.B. (2016) The effect of different weight functions on calibrating corrosion measurements using KNN technique. In: UNSPECIFIED.

Hassan, S. and Khosravi, A. and Jaafar, J. (2016) The impact of FOU size and number of MFs on the prediction performance of Interval Type-2 Fuzzy Logic Systems. In: UNSPECIFIED.

Hassan, N.H.B. and Mustapha, E.E.B. and Arshad, N.I.B. (2016) Antecedent model of information technology infrastructure flexibility towards agility: Questionnaire evaluation. In: UNSPECIFIED.

Haruna, A.A. and Jung, L.T. and Zakaria, N. (2016) Design and development of hybrid integrated thermal aware job scheduling on computational grid environment. In: UNSPECIFIED.

Hooi, Y.K. and Hassan, M.F. and Shariff, A.M. (2016) Ontology evaluation - A criteria selection framework. In: UNSPECIFIED.

Hamed, Y. and Shafie, A. and Mustaffa, Z.B. and Idris, N.R.B. (2016) An application of K-Nearest Neighbor interpolation on calibrating corrosion measurements collected by two non-destructive techniques. In: UNSPECIFIED.

Hussain, N. and Baharom, M.B. and Maharun, M. (2016) Analysis of optimum wire rope configuration for equal unidirectional torsional stiffness for flexible steering shaft. In: UNSPECIFIED.

Hassan, M.A. and Malik, A.S. and Saad, N.M. and Fofi, D. (2016) Evaluation metric for rate of background detection. In: UNSPECIFIED.

Hassan, M.A. and Malik, A.S. and Saad, N. and Karasfi, B. and Ali, Y.S. and Fofi, D. (2016) Optimal source selection for image photoplethysmography. In: UNSPECIFIED.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2016) Setpoint weighted wirelesshart networked control of process plant. In: UNSPECIFIED.

Haron, N. (2016) ReduxGO: Context-Aware Mobile Recommender Application for Reducing Stop-and-Go Scenario. In: UNSPECIFIED.

Hanif, M.F. and Mustafa, M.R. and Hashim, A.M. and Yusof, K.W. (2016) Deforestation alters rainfall: A myth or reality. In: UNSPECIFIED.

Heng, G.C. and Isa, M.H. (2016) Enhancement of activated sludge disintegration and dewaterability by Fenton process. In: UNSPECIFIED.

Hadi, S.H.A.A. and Mannan, H.A. and Mukhtar, H. and Shaharun, M.S. and Murugesan, T. (2016) Morphological analysis of Polyethersulfone/polyvinyl Acetate blend membrane synthesized at various polymer concentrations. In: UNSPECIFIED.

Hanouneh, S. and Amin, H.U. and Saad, N.M. and Malik, A.S. (2016) Functional connectivity of EEG regional delta and inter-regional gamma activity correlates with memory recall. In: UNSPECIFIED.

Hidayat, M.I.P. and Irawan, S. and Abdullah, M.Z. (2016) Casing strength degradation in thermal environment of steam injection wells. In: UNSPECIFIED.

Hamed, Y. and Shafie, A. and Mustaffa, Z.B. and Idris, N.R.B. (2016) Comparative calibration of corrosion measurements using K-nearest neighbour based techniques. In: UNSPECIFIED.

Hermana, M. and Lubis, L.A. and Ghosh, D.P. and Sum, C.W. (2016) New rock physics template for better hydrocarbon prediction. In: UNSPECIFIED.

Hamdi, Z. and Awang, M. and Bataee, M. and Kamyab, M. (2016) Cold CO2 injection for balancing interfacial tension decrease and viscosity increase. In: UNSPECIFIED.

Hamdi, Z. and Awang, M. and Zamani, A. (2016) Evaluating liquid CO2 injection technique for oil recovery using core flood experiments. In: UNSPECIFIED.

Hamdi, Z. and Awang, M. and Basyouni, A. and Hematpour, H. and Bataee, M. (2016) Comparison of CO2 and nitrogen injection at low temperatures in high temperature reservoirs for improving oil recovery. In: UNSPECIFIED.

Hematpour, H. and Abdalla, K.A. and Sambo, C.H. and Farshidi, M. and Danaei, S. and Domingos, C. and Basyouni, A. (2016) Effective application of ionic liquid coupled with solvent for the removal of nickel from heavy oils. In: UNSPECIFIED.

Hermana, M. and Ghosh, D.P. and Sum, C.W. (2016) Optimizing the lithology and pore fluid separation using attenuation attributes. In: UNSPECIFIED.

Hermana, M. and Ghosh, D.P. and Sum, C.W. (2016) New fluid and lithology indicator from seismic and rock physics: Malaysian offshore case study. In: UNSPECIFIED.

Hasan, E. and Ibrahim, R.B. and Ali, S.S.A. and Bingi, K. and Gilani, S.F. (2016) U-Model Based Adaptive Control of Gas Process Plant. In: UNSPECIFIED.

Hassan, S.M. and Ibrahim, R. and Bingi, K. and Chung, T.D. and Saad, N. (2016) Application of Wireless Technology for Control: A WirelessHART Perspective. In: UNSPECIFIED.

Hani, A.F.M. and Feng, Y.-X. and Tang, T.B. (2016) Working memory task performance on prefrontal cortex activation: An optical neuroimaging study. In: UNSPECIFIED.

Hafeez, Y. and Ali, S.S.A. and Malik, A.S. (2016) Neurofeedback training content for treatment of stress. In: UNSPECIFIED.

Hafez, N.F.M. and Mutalib, M.I.A. and Bustam, M.A.B. and El-Harbawi, M. and Leveque, J.-M. (2016) Ecotoxicity of Pyridinium Based ILs towards Guppy Fish and Four Bacterial Strains. In: UNSPECIFIED.

Ho, C.Y. and Yusup, S. and Soon, C.V. and Arpin, M.T. (2016) Rheological Behaviour of Graphene Nano-sheets in Hydrogenated Oil-based Drilling Fluid. In: UNSPECIFIED.

Hosseinipour, A. and Japper-Jaafar, A.B. and Yusup, S. (2016) The Effect of CO2 on Wax Appearance Temperature of Crude Oils. In: UNSPECIFIED.

Humayun, H.Y. and Shaarani, M.N.N.M. and Warrior, A. and Abdullah, B. and Salam, M.A. (2016) The Effect of Co-solvent on the Solubility of a Sparingly Soluble Crystal of Benzoic Acid. In: UNSPECIFIED.

Hamidi, R.M. and Man, Z. and Azizli, K.A. (2016) Concentration of NaOH and the Effect on the Properties of Fly Ash Based Geopolymer. In: UNSPECIFIED.

Harun, N.Y. and Afzal, M.T. (2016) Effect of Particle Size on Mechanical Properties of Pellets Made from Biomass Blends. In: UNSPECIFIED.

Hussain, M. and Tufa, L.D. and Azlan, R.N.A.B.R. and Yusup, S. and Zabiri, H. (2016) Steady State Simulation Studies of Gasification System using Palm Kernel Shell. In: UNSPECIFIED.

Herman, A.P. and Yusup, S. and Shahbaz, M. and Patrick, D.O. (2016) Bottom Ash Characterization and its Catalytic Potential in Biomass Gasification. In: UNSPECIFIED.

Hassan, S.S. and Teh, H.M. and Kurian, V.J. (2016) Hydraulic efficiency of a pile-supported free surface breakwater subjected to random waves. In: UNSPECIFIED.

Hamid, M.S.A. and Shafiq, N. and Zawawi, N.A. and Nuruddin, M.F. and Khamidi, M.F. and Shaharmi, M.S.H.M. (2016) Carbon emission analysis of double storey reinforced concrete house in Malaysia. In: UNSPECIFIED.

Harahap, I.S.H. and Fai, L.C. (2016) Pile set up investigation for improvement on pile capacity. In: UNSPECIFIED.

Hussain, M.A. and Safiq, N. (2016) Experimental study for stepped reinforcement concrete beams. In: UNSPECIFIED.

Hussain, M. and Yusof, K.W. and Mustafa, M.R. (2016) Predicting CMIP5 monthly precipitation over Kuching using multilayer perceptron neural network. In: UNSPECIFIED.

Hasan, R. and Napiah, M. (2016) Statistical interpretations about the use of footbridges by diverse groups of pedestrians in Malaysia. In: UNSPECIFIED.

Heng, G.C. and Chen, K.W. and Isa, M.H. (2016) Enhancement of waste activated sludge disintegration and dewaterability by H2O2 oxidation. In: UNSPECIFIED.

I

Ibrahim, A.M. and Baharudin, B. (2016) Classification of mammogram images using shearlet transform and kernel principal component analysis. In: UNSPECIFIED.

Ismail, N.N.B. and Arshad, N.I.B. and Zakaria, W.A.Z.W. and Jaafar, J.B. (2016) Exploring the talent mobility issue: Towards an intelligent system. In: UNSPECIFIED.

Irshad, S. and Awang, D.R.B. (2016) User perception on Mobile Augmented Reality as a marketing tool. In: UNSPECIFIED.

Ibrahim, N.M. and Hassan, M.F. (2016) Translation model for cross-platform communication in SOA applications. In: UNSPECIFIED.

Ibrahim, N. and Ahmad, W.F.W. and Shafe, A. (2016) Practitioners' validation on effectiveness of multimedia Mobile Learning Application for children. In: UNSPECIFIED.

Izzatie, N.I. and Basha, M.H. and Uemura, Y. and Mazlan, M.A. and Hashim, M.S.M. and Amin, N.A.M. and Hamid, M.F. (2016) Co-pyrolysis of rice straw and polypropylene using fixed-bed pyrolyzer. In: UNSPECIFIED.

Irfan, M. and Yahya, N. and Shafie, A. and Soleimani, H. and Alqasem, B. and Rehman, Z.U. and Qureshi, S. (2016) Evaluation of synthesis characterization and simulation study of magnetic nanoparticles for ammonia synthesis in MIM. In: UNSPECIFIED.

Ibrahim, Y. and Padmanabhan, E. and Ano, A.B. and Ismail, W. (2016) Heat flow characterization and baseline of sandstone using infra-red thermography. In: UNSPECIFIED.

Irfan, S.A. and Razali, R. and Shaari, K.Z.K. and Mansor, N. (2016) Modelling and simulations of controlled release fertilizer. In: UNSPECIFIED.

Ismail, N.E.A. and Taha, M.F. and Ramli, A. (2016) Preparation and characterization activated carbon from rice husk and oil palm empty fruit bunches for removal of Zn2+ in aqueous solution. In: UNSPECIFIED.

Iqbal, M.J. and Faye, I. and Samir, B.B. (2016) Classification of GPCRs proteins using a statistical encoding method. In: UNSPECIFIED.

Imran, M. and Ariff, M. and Sharma, R. and Arshad, N.I. (2016) Exploring the role of Transactive Memory Systems in virtual teams: Review and synthesis of literature. In: UNSPECIFIED.

Indra, Z. and Jaafar, J. and Zamin, N. and Bakar, Z.A. (2016) A language identifier for Indonesian and Malay text document. In: UNSPECIFIED.

Ibrahim, N. and Ahmad, W.F.W. and Shafie, A. (2016) A study on design principles and requirements for multimedia application development: MFolktales application for children's education. In: UNSPECIFIED.

Iqbal, M.J. and Faye, I. and Said, A.M. and Belhaouari Samir, B. (2016) Optimized tree-classification algorithm for classification of protein sequences. In: UNSPECIFIED.

Ibrahim, B.M. and Hassan, M.F. (2016) A new customizable security framework for preventing WSDL attacks. In: UNSPECIFIED.

Irshad, S. and Rohaya, D. and Rambli, A. (2016) Multi-layered mobile augmented reality framework for positive user experience. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Magzoub, M. and Hung, N.T. (2016) An approach to diagnose inner race surface roughness defects in bearing of induction motors. In: UNSPECIFIED.

Irshad, K. and Habib, K. and Thirumalaiswamy, N. and Kareem, M.W. (2016) Thermal comfort analysis of building assisted with Photo Voltaic Trombe wall. In: UNSPECIFIED.

Ibrahim, N. and Fatimah, W. and Ahmad, W. and Shafie, A. (2016) User Experience Study on Folktales Mobile Application for Children's Education. In: UNSPECIFIED.

Inayat, M. and Sulaiman, S.A. and Sanaullah, K. (2016) Effect of blending ratio on co-gasification performance of tropical plant-based biomass. In: UNSPECIFIED.

Ibrahim, R. and Chung, T.D. and Hassan, S.M. and Bingi, K. and Salahuddin, S.K.B. (2016) Solar Energy Harvester for Industrial Wireless Sensor Nodes. In: UNSPECIFIED.

Ilyas, S.U. and Pendyala, R. and Marneni, N. (2016) Stability and Agglomeration of Alumina Nanoparticles in Ethanol-Water Mixtures. In: UNSPECIFIED.

Irfan, M. and Ahmad, T. and Moniruzzaman, M.M. and Abdullah, B.B. and Bhattacharjee, S. (2016) Ionic Liquid Mediated Biosynthesis of Gold Nanoparticles Using Elaeis Guineensis (Oil Palm) Leaves Extract. In: UNSPECIFIED.

Ismail, S. and Mansor, N. and Majeed, Z. and Man, Z. (2016) Effect of Water and EmimOAc as Plasticizer on Gelatinization of Starch. In: UNSPECIFIED.

Iqbal, F. and Mutalib, M.I.A. and Shaharun, M.S. and Khan, M. and Abdullah, B. (2016) Synthesis of ZnFe2O4 Using sol-gel Method: Effect of Different Calcination Parameters. In: UNSPECIFIED.

Isha, A.S.N. and Javaid, M.U. (2016) Psychosocial risks and wellbeing: A variance based approach. In: UNSPECIFIED.

Idris, A. and Man, Z.B. and Maulud, A. and Ahmed, I. (2016) Modified Higuchi Model Applied to Permeation Prediction of Nanocomposite Membranes. In: UNSPECIFIED.

Izhar, L.I. and Stathaki, T. and Howell, K. (2016) Global based thermal image registration for diagnosis of morphoea. In: UNSPECIFIED.

J

Joseph Ng, P.S. and Kang, C.M. and Mahmood, A.K. and Wong, S.W. and Phan, K.Y. and Saw, S.H. and Lim, J.T. (2016) EaaS: Available yet hidden infrastructure inside MSE. In: UNSPECIFIED.

Janjua, U.I. and Jaafar, J. and Lai, F.W. (2016) Expert's opinions on software project effective risk management. In: UNSPECIFIED.

Joseph, A.K. and Radhamani, G. and Kallimani, V. (2016) Improving test efficiency through multiple criteria coverage based test case prioritization using modified heuristic algorithm. In: UNSPECIFIED.

Jie, M. and Aziz, I.A. and Hasbullah, H. and Azizan, S.A.B. (2016) Handwritten digits recognition based on improved label propagation algorith. In: UNSPECIFIED.

Jung, L.T. and Foong, O.-M. and Winata, P. (2016) Optimization of sensor deployment in data center. In: UNSPECIFIED.

Jumbri, K. and Ahmad, H. and Abdulmalek, E. and Rahman, M.B.A. (2016) Biophysical properties of DNA in hydrated ionic liquids. In: UNSPECIFIED.

Jahan, S. and Sakidin, H. and Nazar, R.M. (2016) MHD stagnation point flow over a stretching cylinder with variable thermal conductivity and joule heating. In: UNSPECIFIED.

Joseph, E. and Singh, B.S.M. and Mohamed, N.M. and Kait, C.F. and Saheed, M.S.M. and Khatani, M. (2016) Investigating the performance of nitrogen-doped graphene photoanode in dye-sensitized solar cells. In: UNSPECIFIED.

Jamaludin, N. and Monsi, M. and Hassan, N. and Zainuddin, N. (2016) The performance of the IMSS2-5D procedure for simultaneous bounding of polynomial zeros. In: UNSPECIFIED.

Janjua, U.I. and Jaafar, J. and Aziz, I.B.A. (2016) Integration of supportive processes with elementary processes for making current practices of software project risk management more effective. In: UNSPECIFIED.

Josephng, P.S. and Kang, C.M. and Choo, P.Y. and Wong, S.W. and Phan, K.Y. and Lim, E.H. (2016) Beyond cloud infrastructure services in medium size manufacturing. In: UNSPECIFIED.

Janjua, U.I. and Jaafar, J. (2016) Role of academia to make current practices of software project risk management more effective: An exploratory study. In: UNSPECIFIED.

Jafar, A. and Rehman, S.M.F.U. and Ahmed, N. and Mian, M.U. (2016) A 2D mapping spy robot worldwide auto and manually controllable for surveillance features. In: UNSPECIFIED.

Javed, E. and Faye, I. and Malik, A.S. and Abdullah, J.M. (2016) An EMD based method for reduction of ballistocardiogram artifact from EEG studies of evoked potentials. In: UNSPECIFIED.

Jatoi, M.A. and Kamel, N. and Faye, I. and Malik, A.S. and Bornot, J.M. and Begum, T. (2016) BEM based solution of forward problem for brain source estimation. In: UNSPECIFIED.

Jamaludin, S.N.F. and Latiff, A.H.A. and Kadir, A.A. (2016) Interpretation of Gas Seepage on Seismic Data: Example from Malaysian offshore. In: UNSPECIFIED.

Janjua, O.A. and Wahid, A. and Salim, A.M.A. and Rahman, M.N.B.A. (2016) Prospect evaluation of shallow I-35 reservoir of NE Malay Basin offshore, Terengganu, Malaysia. In: UNSPECIFIED.

Jufar, S.R. and Negash, B.M. (2016) Numerical study of non-premixed combustion of pulsed swirling co-axial jets. In: UNSPECIFIED.

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2016) Mixed Matrix Membranes Comprising of ZIF-8 Nanofillers for Enhanced Gas Transport Properties. In: UNSPECIFIED.

Jamil, M.F. and Uemura, Y. and Kusakabe, K. and Ayodele, O.B. and Osman, N. and Majid, N.M.N.A. and Yusup, S. (2016) Transesterification of Mixture of Castor Oil and Sunflower Oil in Millichannel Reactor: FAME Yield and Flow Behaviour. In: UNSPECIFIED.

Johari, K. and Saman, N. and Tien, S.S. and Chin, C.S. and Kong, H. and Mat, H. (2016) Removal of Elemental Mercury by Coconut Pith Char Adsorbents. In: UNSPECIFIED.

Jiwa, M.Z. and Kim, D.K. and Mustaffa, Z. and Choi, H.S. (2016) An optimised model of pipe-in-pipe installation for subsea field. In: UNSPECIFIED.

Jha, V. and Pasha, M. and Zaini, D. (2016) Enhanced Inherent Safety Intervention Framework. In: UNSPECIFIED.

K

Kudiri, K.M. and Said, A.M. and Nayan, M.Y. (2016) Human emotion detection through speech and facial expressions. In: UNSPECIFIED.

Khan, S. and Yong, S.-P. (2016) A comparison of deep learning and hand crafted features in medical image modality classification. In: UNSPECIFIED.

Kalid, K.S. and Hooi, Y.K. and Shan-Nice, K. (2016) KnowledgeFlood: Sharing volunteers' experience |on flood disaster using storytelling. In: UNSPECIFIED.

Khan, S. and Yong, S.-P. and Deng, J.D. (2016) Ensemble classification with modified SIFT descriptor for medical image modality. In: UNSPECIFIED.

Khe, C.S. and Aziz, A. and Lockman, Z. and Rajalingam, S. and Merican, Z. and Vasant, P. (2016) Formation of raspberry like cobalt particles with hydrazine reduction in a polyol route. In: UNSPECIFIED.

Krishnan, S. and Quraishi, K.S. and Aminuddin, N.F. and Mazlan, F.A. and Leveque, J.-M. (2016) Biodegradability of immidazolium, pyridinium, piperidinium and pyrrolidinium based ionic liquid in different water source. In: UNSPECIFIED.

Khan, H.N. and Razali, R.B. and Shafei, A.B. (2016) On the relationship between health, education and economic growth: Time series evidence from Malaysia. In: UNSPECIFIED.

Karim, S.A.A. (2016) Data interpolation using rational cubic Ball spline with three parameters. In: UNSPECIFIED.

Khan, I.U. and Bhat, A.H. and Masset, P.J. and Khan, F.U. and Rehman, W.U. (2016) Synthesis and characterization of palm oil fuel ash (POFA) and metakaolin based geopolymer for possible application in nanocoating. In: UNSPECIFIED.

Khan, Z. and Razali, R.B. and Daud, H. and Nor, N.M. and Firuzabad, M.F. (2016) State estimation of the power system using robust estimator. In: UNSPECIFIED.

Khan, S.A. and Yong, S.-P. (2016) Analysis of primitive features for medical image modality classification. In: UNSPECIFIED.

Kamaruddin, I. and Napiah, M. and Nahi, M.H. (2016) The Influence of Moisture on the Performance of Polymer Fibre-Reinforced Asphalt Mixture. In: UNSPECIFIED.

Kumar, P. and Kang, C.H. and Burhanudin, Z.A. and Saheed, M.S.M. and Irshad, M.I. and Mohamed, N.M. (2016) Graphene-based hybrid thin films as transparent conductive electrode for optoelectronic devices. In: UNSPECIFIED.

Kamarulzaman, N. and Zawawi, N.A.W.A. and Mohammed, N.I. (2016) Effect of landscape density in a residential area on thermal performance in a tropical climate. In: UNSPECIFIED.

Karim, S.A.A. and Ismail, M.T. and Hasan, M.K. and Sulaiman, J. and Sakidin, H. (2016) Denoising using new thresholding method. In: UNSPECIFIED.

Khan, W.Z. and Aalsalem, M.Y. and Saad, N.M. and Xaing, Y. and Luan, T.H. (2016) Detecting replicated nodes in Wireless Sensor Networks using random walks and network division. In: UNSPECIFIED.

Kadhim, S.K. and Nasif, M.S. (2016) Experimental investigation of the effect vertical oscillation on the heat transfer coefficient of the finned tube. In: UNSPECIFIED.

Kannan, R. and Rathinam, A. and Baharudi, Z.B.H. and Karthikeyan, T. (2016) Modified apo PWM based multilevel inverter topology for solar power conversion system. In: UNSPECIFIED.

Kalwar, S.A. and Elraies, K.A. and Abbas, G. and Kumar, S. and Farouque, K. (2016) AASP flooding as a substitute of ASP flooding for chemical eor in carbonate reservoirs. In: UNSPECIFIED.

Kiat, C.W. and Menier, D. and Fathiyah Jamaludin, S.N. and Ghosh, D. (2016) Geomorphology and karstification of the southern field high carbonates in Central Luconia Province. In: UNSPECIFIED.

Kannan, R. and Ali, S.S.A. and Farah, A. and Adil, S.H. and Khan, A. (2016) Smart Wearable EEG Sensor. In: UNSPECIFIED.

Kadir, N.A.A. and Rusli, R. and Buang, A. and Rahim, N.S.A. (2016) Investigation of the Explosion Behaviour Affected by the Changes of Particle Size. In: UNSPECIFIED.

Kiu, S.S.K. and Yusup, S. and Soon, C.V. and Arpin, T. and Samion, S. (2016) Lubricant Enhancement via Hydrodynamic and Acoustic Cavitation. In: UNSPECIFIED.

Klemeš, J.J. and Varbanov, P.S. and Lam, H.L. and Yusup, S. (2016) Energy, Water and Environmental Footprint Interactions: Implications for the Major Economy Sectors of Europe, South East Asia and Worldwide. In: UNSPECIFIED.

Khan, M.S. and Liew, C.S. and Kurnia, K.A. and Cornelius, B. and Lal, B. (2016) Application of COSMO-RS in Investigating Ionic Liquid as Thermodynamic Hydrate Inhibitor for Methane Hydrate. In: UNSPECIFIED.

Kumaran, K. and Lam, M.K. and Tan, X.B. and Uemura, Y. and Lim, J.W. and Khoo, C.G. and Lee, K.T. (2016) Cultivation of Chlorella vulgaris Using Plant-based and Animal Waste-based Compost: A Comparison Study. In: UNSPECIFIED.

Khan, M.S. and Lal, B. and Partoon, B. and Keong, L.K. and Bustam, A.B. and Mellon, N.B. (2016) Experimental Evaluation of a Novel Thermodynamic Inhibitor for CH4 and CO2 Hydrates. In: UNSPECIFIED.

Kamaruzzaman, J.A. and Zain, A.M. (2016) Coral Bay Shore Zones Tar Ball Distribution. In: UNSPECIFIED.

Kurnia, K.A. and Athirah, N.A. and Candieiro, F.J.M. and Lal, B. (2016) Phase Behavior of Ternary Mixtures Aliphatic Hydrocarbon + Aromatic Hydrocarbon + Deep Eutectic Solvent: A Step Forward toward "greener" Extraction Process. In: UNSPECIFIED.

Krishnan, V. and Thachanan, S. and Matsumura, Y. and Uemura, Y. (2016) Supercritical Water Gasification on Three Types of Microalgae in the Presence and Absence of Catalyst and Salt. In: UNSPECIFIED.

Khan, A.S. and Man, Z. and Bustam, M.A. and Kait, C.F. and Ullah, Z. and Sarwono, A. and Wilfred, C.D. (2016) Pyrolysis Kinetics of 1-Propyronitrile Imidazolium Trifluoroacetate Ionic Liquid Using Thermogravimetric Analysis. In: UNSPECIFIED.

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Shariff, A.M. and Garg, S. (2016) Thermophysical Properties of Aqueous 1-Butyl-3-Methylimidazolium Acetate BMIM AC + Monoethanolamine (MEA) Hybrid as a Solvent for CO2 Capture. In: UNSPECIFIED.

Kashif, S.B. and Abdullah, M.Z. and Kushaari, K. (2016) CFD Modeling of N2/H2 Gaseous Flow with Geometric Variations in a Monolithic Channel. In: UNSPECIFIED.

Khan, M.I. and Zaini, D. and Shariff, A.M. and Moniruzzaman, M. (2016) Framework for Ecotoxicological Risk Assessment of Ionic Liquids. In: UNSPECIFIED.

Kurian, V.J. and Tuhaijan, S.N.A. and Ng, C.Y. (2016) Effects of current coexisting with random wave on offshore spar platforms. In: UNSPECIFIED.

Kim, D.K. and Poh, B.Y. and Lee, J.R. and Park, K.S. and Paik, J.K. (2016) Development of ultimate strength versus plate index diagram for initially deflected steel plate under axial compression. In: UNSPECIFIED.

Kamaruddin, I. and Napiah, M. and Nahi, M.H. (2016) The effect of water on the performance of polymer fibre-reinforced road bituminous mixtures. In: UNSPECIFIED.

Kutty, S.R.M. and Ezechi, E.H. and Nagum, A.T.A. (2016) Influence of environmental factor on the performance of Pistia Stratiotes in a surface sequencing baffled steep flow constructed wetland. In: UNSPECIFIED.

Kutty, S.R.M. and Aminu, N. and Isa, M.H. and Salihi, I.U. (2016) Application of integrated bioreactor system (i-SGBR) for simultaneous treatment of wastewater and excess sludge degradation. In: UNSPECIFIED.

Khan, T. and Isa, M.H. and Mustafa, M.R. (2016) Artificial neural network approach for modeling of Cd (II) adsorption from aqueous solution by incinerated rice husk carbon. In: UNSPECIFIED.

Klufallah, M.M.A. and Nuruddin, M.F. and Othman, I. and Khamidi, M.F. (2016) The development of embodied carbon emission benchmark model for purpose built offices in Malaysia. In: UNSPECIFIED.

Kurian, V.J. and Rini, N. and Liew, M.S. and Whyte, A. (2016) FPSO response and water depth: A study using model tests. In: UNSPECIFIED.

Kim, Y.T. and Park, K.S. and Choi, H.S. and Yu, S.Y. and Kim, D.K. (2016) Method for installation of marine HDPE pipeline. In: UNSPECIFIED.

Kamal, N.L.B.M. and Hayder, G. and Ahmed, O.A. and Beddu, S.B. and Nuruddin, M.F. and Shafiq, N. (2016) Sustainable waste management of bottom ash as cement replacement in green building. In: UNSPECIFIED.

L

Ling, L.W. and Ahmad, W.F.W. and Singh, T.K.R. (2016) Factors influencing behavioral intention to use computers among teachers. In: UNSPECIFIED.

Latiff, N.R.A. and Soleimani, H. and Zaid, H.M. and Adil, M. (2016) Magnetoviscous effect of ferrite-based magnetic fluid for EOR application. In: UNSPECIFIED.

Leveque, J.-M. and Aminuddin, N.F. and Kermanioryani, M. and Mutalib, M.I.A. and Lethesh, K.C. and Mazlan, F.A. (2016) An easy, green and ultra-fast synthesis of dicationic ionic liquids: From days to minutes. In: UNSPECIFIED.

Lee, K. and Guan, B.H. and Zaid, H.M. and Soleimani, H. and Ching, D.L.C. (2016) Impact of pH on zinc oxide particle size by using sol-gel process. In: UNSPECIFIED.

Lim, J.-W. and Lam, K.-Y. and Bashir, M.J.K. and Yeong, Y.-F. and Lam, M.-K. and Ho, Y.-C. (2016) Spent coffee grounds-based activated carbon preparation for sequestering of malachite green. In: UNSPECIFIED.

Lubis, L.A. and Ghosh, D.P. and Hermana, M. (2016) Elastic and Electrical Properties Evaluation of Low Resistivity Pays in Malay Basin Clastics Reservoirs. In: UNSPECIFIED.

Latiff, A.H.A. and Osman, S.A.A. and Jamaludin, S.N.F. (2016) Seismic Data Analysis to the Converted Wave Acquisition: A Case Study in Offshore Malaysia. In: UNSPECIFIED.

Latiff, A.H.A. and Jamaludin, S.N.F. and Zakariah, M.N.A. (2016) Post-Stack Seismic Data Enhancement of Thrust-Belt Area, Sabah Basin. In: UNSPECIFIED.

Loshini, T. and Asirvadam, V.S. and Dass, S.C. and Gill, B.S. (2016) Predicting localized dengue incidences using ensemble system identification. In: UNSPECIFIED.

Lemma, T.A. and Hashim, F.M. and Abd Majid, M.A.B. (2016) Exergy based multi-state reliability model for a stationary gas turbine. In: UNSPECIFIED.

Lemma, T.A. and Hashim, F.M. and Abd Majid, M.A.B. (2016) Gas turbine prognostics using fuzzy systems and modified bat algorithm. In: UNSPECIFIED.

Lai, L.S. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2016) Effect of Synthesis Parameters on the Formation of ZIF-8 under Microwave-assisted Solvothermal. In: UNSPECIFIED.

Lethesh, K.C. and Wilfred, C.D. and Shah, S.N. and Uemura, Y. and Mutalib, M.I.A. (2016) Synthesis and Characterization of Nitrile-functionalized Azepanium Ionic Liquids for the Dissolution of Cellulose. In: UNSPECIFIED.

Lau, Y.L. and Yeong, Y.F. (2016) Optimization of Nitrate Removal from Aqueous Solution by Amine-functionalized MCM-41 Using Response Surface Methodology. In: UNSPECIFIED.

Lotfi, M. and Moniruzzaman, M. and Mutalib, M.I.A. and Wilfred, C.D. and Alitheen, N.B. and Goto, M. (2016) Analysis of Multiple Solvation Interactions of Methotrexate and Ammonium Based Ionic Liquids Using COSMO-RS. In: UNSPECIFIED.

Lock, S.S.M. and Lau, K.K. and Mei, I.L.S. and Shariff, A.M. and Yeong, Y.F. (2016) Cavity Energetic Sizing Algorithm Applied in Polymeric Membranes for Gas Separation. In: UNSPECIFIED.

Lee, S.-P. and Mellon, N. and Shariff, A.M. and Leveque, J.-M. (2016) Effect of Diaminopropane on Formation of Triazine-based Covalent Organic Polymer for CO2 Capture. In: UNSPECIFIED.

Laghari, S.M. and Isa, M.H. and Ali, Z.M. and Laghari, A.J. (2016) Comparative study of polymeric adsorbent for copper removal from industrial effluents. In: UNSPECIFIED.

Lai, F.-W. and Shad, M.K. and Md Nordin, S. (2016) Cost-benefit analysis for green fertilizer technology development: A case in Malaysia. In: UNSPECIFIED.

M

Marzuki, N.A. and Arshad, N.I. (2016) Understanding the use of e-Government portal in rural areas in Malaysia: A proposal towards a policy. In: UNSPECIFIED.

Mehmood, T. and Rais, H.B.Md. (2016) Machine learning algorithms in context of intrusion detection. In: UNSPECIFIED.

Madni, T.M. and Nayan, Y.B. and Sulaiman, S. and Abro, A. and Tahir, M. (2016) Usability evaluation of orientation techniques for medical image analysis using tabletop system. In: UNSPECIFIED.

Maitra, S. and Dominic, P.D.D. (2016) Impact of supply chain integration and selective disintegration on supply chain efficiency and organization performance. In: UNSPECIFIED.

Malik, M.S.A. and Sulaiman, S. (2016) An analytical evaluation of information visualization factors for multiple electronic health records. In: UNSPECIFIED.

Memon, P.Q. and Yong, S.-P. and Pao, W. (2016) Dynamic Surrogate Reservoir Model with well constraints. In: UNSPECIFIED.

Mukhtar, M.A.O. and Hassan, M.F.B. and Jaafar, J.B. and Rahim, L.A. (2016) A comparison study between WSDMDA and NDT methodologies using Quality Evaluation Framework. In: UNSPECIFIED.

Mahamad, S. and Hipani, N.H. and Basri, S. and Hashim, A.S. and Sarlan, A. and Sulaiman, S. (2016) Development of Chinese language application in learning as a second language for Malaysian. In: UNSPECIFIED.

Mohamad, W.F. and Khan, A.A. and Ahmad, F. and Yassin, A. (2016) Physical and Mechanical Properties of Ni-Cr based composites with addition of solid lubricants produced through powder metallurgy process. In: UNSPECIFIED.

Mahmoud, A.A. and Dass, S.C. and Muthuvalu, M.S. (2016) A maximum likelihood estimation framework for delay logistic differential equation model. In: UNSPECIFIED.

Mahdi, F.P. and Vasant, P. and Kallimani, V. and Abdullah-Al-Wadud, M. (2016) A review on economic emission dispatch problems using quantum computational intelligence. In: UNSPECIFIED.

Mukhtar, S.M. and Daud, H. and Dass, S.C. (2016) Squared exponential covariance function for prediction of hydrocarbon in seabed logging application. In: UNSPECIFIED.

Mumtaz, A. and Mohamed, N.M. and Saheed, M.S.M. and Yar, A. and Irshad, M.I. (2016) Enhanced photoelectrochemical activity by nanostructured V2O5/TiO2 bilayer. In: UNSPECIFIED.

Matheswaran, P. and Wilfred, C.D. and Kurnia, K.A. and Ramli, A. (2016) Prediction of activity coefficient of sulfones at infinite dilution in ionic liquids and their modeling using COSMO-RS. In: UNSPECIFIED.

Mohamed, N.M. and Bashiri, R. and Kait, C.F. and Sufian, S. and Khatani, M. (2016) Investigation of photoconversion efficiency of Cu and Ni doped TiO2 thin film in photoelectrochemical cell. In: UNSPECIFIED.

Mohammed, N.M. and Mumtaz, A. and Ansari, M.S. and Ahmad, R. (2016) Electrochemical study of the Pt and Pt-Ni upon multiwalled carbon nanotubes. In: UNSPECIFIED.

Malik, U. and Ching, D.L.C. and Daud, H. and Januarisma, V. (2016) Modeling shales and marls reflections by autoregression method. In: UNSPECIFIED.

Merican, Z. and Vu, B.K. and Solovyeva, V.A. and Rodionov, V.O. and Khe, C.S. and Rajalingam, S. and Vasant, P. (2016) Fluorocarbon compatibilized gold-silica nanocomposites for recyclable regioselective hydroamination of alkynes in a fluorous biphasic system. In: UNSPECIFIED.

Muthuvalu, M.S. and Ali, M.K.M. and Sulaiman, J. (2016) Performance analysis of 2-Point explicit group iterative methods for solving four-point composite closed Newton-Cotes system. In: UNSPECIFIED.

Mohamed, N.M. and Zaine, S.N.A. and Ramli, R.M. (2016) Evaluation of CO2 emission from dye solar cell panel production process. In: UNSPECIFIED.

Mu'Azu, A.A. and Tang, L.J. and Hasbullah, H. and Lawal, I.A. (2016) A cluster-based stable routing algorithm for vehicular ad hoc network. In: UNSPECIFIED.

Mastor, F.A. and Aziz, I.A. and Ismail, N.N. and Mehat, M. and Haron, N. and Wahyu, A. (2016) Conceptual design of pre-flood warning system based on user mobility. In: UNSPECIFIED.

Muthuvalu, M.S. and Aruchunan, E. and Ali, M.K.M. and Sulaiman, J. (2016) A comparative study of iterative methods for solving first kind Fredholm integral equations with the semi-smooth kernel. In: UNSPECIFIED.

Mehmood, T. and Rais, H.B.M. (2016) SVM for network anomaly detection using ACO feature subset. In: UNSPECIFIED.

Manaf, M.B.A. and Sulaiman, S.B. (2016) Integrating vibration sensing and non-speech visualization to notify hearing impaired students on fire in a controlled situation. In: UNSPECIFIED.

Mulubrhan, F. and Mokhtar, A.A. and Muhammad, M. (2016) Fuzzy Activity Based Life Cycle Costing for Repairable Equipment. In: UNSPECIFIED.

Mansor, R. and Kasim, M.M. and Othman, M. (2016) The framework of weighted subset-hood Mamdani fuzzy rule based system rule extraction (MFRBS-WSBA) for forecasting electricity load demand. In: UNSPECIFIED.

Mat-Shayuti, M.S. and Abdullah, M.Z. and Megat-Yusoff, P.S.M. (2016) THERMAL properties and morphology of Polypropylene/Polycarbonate/Polypropylene-Graft-Maleic anhydride blends. In: UNSPECIFIED.

Mathur, N. and Asirvadam, V.S. and Dass, S.C. and Gill, B.S. (2016) Generating vulnerability maps of dengue incidences for Petaling district in Malaysia. In: UNSPECIFIED.

Muthuvalu, M.S. and Htun, T.Z. and Aruchunan, E. and Ali, M.K.M. and Sulaiman, J. (2016) Performance Analysis of Half-Sweep Successive Over-Relaxation Iterative Method for Solving Four-Point Composite Closed Newton-Cotes Quadrature System. In: UNSPECIFIED.

Mukhtar, H. and Mannan, H.A. and Minh, D. and Nasir, R. and Moshshim, D.F. and Murugesan, T. (2016) Polymer blend membranes for CO2 separation from natural gas. In: UNSPECIFIED.

Muthuvalu, M.S. (2016) The preconditioned Gauss-Seidel iterative methods for solving Fredholm integral equations of the second kind. In: UNSPECIFIED.

Muthuvalu, M.S. and Aruchunan, E. and Ali, M.K.M. and Sulaiman, J. (2016) Preconditioned Jacobi-type iterative methods for solving Fredholm integral equations of the second kind. In: UNSPECIFIED.

Mitra, M. and Banerjee, D. and Kargupta, K. and Ganguly, S. (2016) Temperature dependent thermoelectric property of reduced graphene oxide-polyaniline composite. In: UNSPECIFIED.

Madni, T.M. and Nayan, Y. and Sulaiman, S. and Tahir, M. and Abro, A. (2016) Usability Dimensions for Content-Orientation Techniques in Multi-Touch Tabletop Displays: An Overview. In: UNSPECIFIED.

Malik, A.S. and Faye, I. and Karasfi, B. and Shuaibu, A.N. (2016) Performance comparison of clustering techniques in detection of dominant flow field in crowded scene. In: UNSPECIFIED.

Mazher, M. and Aziz, A.A. and Malik, A.S. and Qayyum, A. (2016) A statistical analysis on learning and non-learning mental states using EEG. In: UNSPECIFIED.

Mazher, M. and Aziz, A.B.A. and Malik, A.S. and Qayyum, A. (2016) A comparison of brain regions based on EEG during multimedia learning cognitive activity. In: UNSPECIFIED.

Mahmod, M.F. and Bakar, E.A. and Othman, A.R. (2016) Defect Detection of Fiberglass Composite Laminates (FGCL) with Ultrasonic A-Scan Signal Measurement. In: UNSPECIFIED.

Mukhtar, A. and Tang, T.B. (2016) Vision based motorcycle detection using HOG features. In: UNSPECIFIED.

Mumtaz, W. and Malik, A.S. and Ali, S.S.A. and Yasin, M.A.M. (2016) P300 intensities and latencies for major depressive disorder detection. In: UNSPECIFIED.

Mohamed, A. and Rahman, A.H.A. and Ismail, M.S. (2016) Sedimentary Facies of the West Crocker Formation North Kota Kinabalu-Tuaran Area, Sabah, Malaysia. In: UNSPECIFIED.

Machmudah, A. and Parman, S. and Baharom, M.B. (2016) Phase space of self-motion and mechanism path tracking. In: UNSPECIFIED.

Muhammad, M. and Mohammadreza, T.B. and Karim, Z.A.A. (2016) Methodology for short-term performance prognostic of gas turbine using recurrent neural network. In: UNSPECIFIED.

Mahesh, K. and Nallagownden, P. and Elamvazuthi, I. (2016) Optimal configuration of DG in distribution system: An overview. In: UNSPECIFIED.

Majid, M.A.A. and Nordin, A. (2016) Study on relative COP changes with increasing heat input temperatures of double effect steam absorption chillers. In: UNSPECIFIED.

Mahmoud, A.A. and Dass, S.C. and Muthuvalu, M.S. (2016) A maximum likelihood estimation framework for the exponential Differential Equation Model. In: UNSPECIFIED.

Mohammad Rozali, N.E. and Wan Alwi, S.R. and Ho, W.S. and Manan, Z.A. and Klemeš, J.J. (2016) PoPA - SHARPS: A new framework for cost-effective design of hybrid power systems. In: UNSPECIFIED.

Mohammed, B.S. and Nuruddin, M.F. and Shafiq, N. (2016) Development of high strength nano-silica modified rubbercrete. In: UNSPECIFIED.

Massich, J. and Rastgoo, M. and Lemaître, G. and Cheung, C.Y. and Wong, T.Y. and Sidibé, D. and Mériaudeau, F. (2016) Classifying DME vs normal SD-OCT volumes: A review. In: UNSPECIFIED.

Muhammad, M. and Burhani, N.R.A. and Mokhtar, A.A. (2016) A novel multi-objective and multi-criteria decision support system for logistic management during flood disaster. In: UNSPECIFIED.

Muhammad, M.B. and Raza, T. and Majid, M.A.A. (2016) Prediction of failures by using crow/AMSAA model in microsoft excel. In: UNSPECIFIED.

Mokhtar, A.A. and Noor, M.A.M. (2016) Comparative analysis of offshore pipeline reliability using degradation analysis and PF interval models. In: UNSPECIFIED.

Majid, N.D.A. and Shariff, A.M. and Rusli, R. and Azman, K.I. (2016) Trade Secret Model Based on OSHA Process Safety Management Requirement. In: UNSPECIFIED.

Mandal, P.C. and Abdullah, A.B. and Rahman, M.M. (2016) Total Acid Number Reduction of 2, 6-Naphthalenedicarboxylic Acid Using Subcritical Methanol for Reducing Acidity of Heavy Oil: A Kinetic Study. In: UNSPECIFIED.

Mannan, H.A. and Mukhtar, H. and Shahrun, M.S. and Bustam, M.A. and Man, Z. and Bakar, M.Z.A. (2016) Effect of EMIMTf2N Ionic Liquid on Ionic Liquid-polymeric Membrane (ILPM) for CO2/CH4 Separation. In: UNSPECIFIED.

Mubashir, M. and Fong, Y.Y. and Keong, L.K. and Ting, S.S. (2016) CO2 Adsorption Study Using Deca-Dodecasil 3 Rhombohedral (DDR3) Zeolite Synthesized Via Ultrasonic Irradiation Coupled with Hydrothermal Heating Method. In: UNSPECIFIED.

Masiran, N. and Vo, D.-V.N. and Salam, M.A. and Abdullah, B. (2016) Improvement on Coke Formation of CaO-Ni/Al2O3 Catalysts in Ethylene Production via Dehydration of Ethanol. In: UNSPECIFIED.

Malakahmad, A. and Law, M.X. and Ng, K.-W. and Manan, T.S.A. (2016) The Fate and Toxicity Assessment of Polycyclic Aromatic Hydrocarbons (PAHs) in Water Streams of Malaysia. In: UNSPECIFIED.

Majeed, Z. and Mansor, N. and Ismail, S. and Mathialagan, R. and Man, Z. (2016) Gompertz Kinetics of Soil Microbial Biomass in Response to Lignin Reinforcing of Urea-Crosslinked Starch Films. In: UNSPECIFIED.

Mushtaq, A. and Mukhtar, H.B. and Shariff, A.M. (2016) Effect of Glass Transition Temperature in Enhanced Polymeric Blend Membranes. In: UNSPECIFIED.

Mazlan, M.A.F. and Uemura, Y. and Yusup, S. and Elhassan, F. and Uddin, A. and Hiwada, A. and Demiya, M. (2016) Activated Carbon from Rubber Wood Sawdust by Carbon Dioxide Activation. In: UNSPECIFIED.

Mohamad, M.B. and Fong, Y.Y. and Shariff, A. (2016) Gas Separation of Carbon Dioxide from Methane Using Polysulfone Membrane Incorporated with Zeolite-T. In: UNSPECIFIED.

Mohamed, M. and Yusup, S. and Bustam, M.A. (2016) Synthesis of CaO-based Sorbent from Biomass for CO2 Capture in Series of Calcination-carbonation Cycle. In: UNSPECIFIED.

Malkawi, A.B. and Nuruddin, M.F. and Fauzi, A. and Almattarneh, H. and Mohammed, B.S. (2016) Effects of Alkaline Solution on Properties of the HCFA Geopolymer Mortars. In: UNSPECIFIED.

Mohammed, B.S. and Aswin, M. and Vethamoorty (2016) Properties and structural behavior of sawdust interlocking bricks. In: UNSPECIFIED.

Mahamood, N. and Mohammed, B.S. and Shafiq, N. and Eisa, S.M.B. (2016) Development of nano silica modified solid rubbercrete bricks. In: UNSPECIFIED.

Mohamad, H. (2016) Development of a new distributed optical fibre sensor as borehole extensometer. In: UNSPECIFIED.

Memon, I.A. and Napiah, M. and Hussain, M.A. and Hakro, M.R. (2016) Influence of factors to shift private transport users to park-and-ride service in Putrajaya. In: UNSPECIFIED.

Myint, K.C. and Matori, A.N. and Gohari, A. (2016) Real time kinematic-GNSS methods for monitoring subsidence of offshore platform. In: UNSPECIFIED.

Muhammad, M.M. and Yusof, K.W. and Mustafa, M.R. and Ghani, A.A. (2016) Hydraulic assessment of grassed swale as bioengineered channel. In: UNSPECIFIED.

Mustafa, M.R. and Hussain, M. and Yusof, K.W. (2016) Climate change impact on water resources of Bakun hydroelectric plant in Sarawak, Malaysia. In: UNSPECIFIED.

N

Nyamasvisva, T.E. and Yahya, N. and Hasbullah, H.B. and Rauf, M. and Rostami, A. and Dahy, E. (2016) Estimating Direct Waves with Respect to Receiver Offset, Antenna Current and Frequency in MCSEM. In: UNSPECIFIED.

Nurhadi, N.A. and Rahim, L.A. and Arshad, N.I. (2016) Analysis of domain specific modeling languages for strategy educational games design. In: UNSPECIFIED.

Nyamasvisva, T.E. and Hasbullah, H.B. and Yahya, N. and Nayan, Y.B. and Rostami, A. and Rauf, M. (2016) Computer algorithm for airwave prediction in marine controlled source electromagnetics data. In: UNSPECIFIED.

Niknejad, N. and Ghani, I. and Hussin, A.R.C. and Saedi, A. (2016) Proposing a new framework for service oriented architecture adoption. In: UNSPECIFIED.

Najib, Y.N.A. and Daud, H. and Aziz, A.A. and Razali, R. (2016) 3-Dimensional wireless sensor network localization: A review. In: UNSPECIFIED.

Nasrullah, A. and Bhat, A.H. and Isa, M.H. (2016) Lignin: A sustainable biosorbent for heavy metal adsorption from wastewater, a review. In: UNSPECIFIED.

Najib, Y.N.A. and Daud, H. and Aziz, A.A. and Razali, R. (2016) 3-Dimensional wireless sensor network localization: A review. In: UNSPECIFIED.

Narahari, M. and Raju, S.S.K. and Nagarani, P. (2016) Joule heating effects on unsteady natural convection flow near a moving semi-infinite vertical plate with variable heat flux and mass transfer. In: UNSPECIFIED.

Nurika, O. and Hassan, M.F. and Zakaria, N. and Jung, L.T. (2016) Mathematical models for network card simulation and their empirical validations. In: UNSPECIFIED.

Nahi, M.H. and Kamaruddin, I. and Napiah, M. (2016) Rutting Prediction in Asphalt Pavement Based on Viscoelastic Theory. In: UNSPECIFIED.

Nuruddin, M.F. and Malkawi, A.B. and Fauzi, A. and Mohammed, B.S. and Almattarneh, H.M. (2016) Geopolymer concrete for structural use: Recent findings and limitations. In: UNSPECIFIED.

Nuruddin, M.F. and Malkawi, A.B. and Fauzi, A. and Mohammed, B.S. and Almattarneh, H.M. (2016) Evolution of geopolymer binders: A review. In: UNSPECIFIED.

Nazratulhuda, H. and Othman, M. (2016) Purification of Tronoh Silica Sand via preliminary process of mechanical milling. In: UNSPECIFIED.

Nizarul, O. and Hermana, M. and Bashir, Y. and Ghosh, D.P. (2016) Improving Thin Bed Identification in Sarawak Basin Field using Short Time Fourier Transform Half Cepstrum (STFTHC) method. In: UNSPECIFIED.

Nizamani, Z. and Ching, Y.E. and Wahab, M.M.B.A. and Olanrewaju, A. (2016) Extreme environmental load models for wave and current response surface method. In: UNSPECIFIED.

Negash, B.M. and Tufa, L.D. and Marappagounder, R. and Awang, M.B. (2016) Conceptual framework for using system identification in reservoir production forecasting. In: UNSPECIFIED.

Nasif, M.S. and Kumar, G.A. and Roslan, R. (2016) An effective optimization of rainwater harvesting system in hotel and hospital buildings. In: UNSPECIFIED.

Negash, B.M. and Awang, M. and Jufar, S.R. and Robert, A.J. (2016) History matching of the PUNQ-S3 reservoir model using proxy modeling and multi-objective optimizations. In: UNSPECIFIED.

Nashed, O. and Koh, J.C.H. and Lal, B. (2016) Physical-chemical Properties of Aqueous TBAOH Solution for Gas Hydrates Promotion. In: UNSPECIFIED.

Negash, B.M. and Tufa, L.D. and Marappagounder, R. and Awang, M.B. (2016) Conceptual Framework for Using System Identification in Reservoir Production Forecasting. In: UNSPECIFIED.

Naz, M.Y. and Ismail, N.I. and Sulaiman, S.A. and Shukrullah, S. (2016) Erodent Impact Angle and Velocity Effects on Surface Morphology of Mild Steel. In: UNSPECIFIED.

Najmuddin, R.A. and Mutalib, M.I.A. and Shah, S.N. and Suleman, H. and Lethesh, K.C. and Pilus, R.B.M. and Maulud, A.S. (2016) Liquid-Liquid Extraction of Naphthenic Acid Using Thiocyanate Based Ionic Liquids. In: UNSPECIFIED.

Nadeem, S. and Mutalib, I.A. and Shahrun, M.S. (2016) Synthesis of Metalloporphyrin Encapsulated Zeolite A for Photocatalytic Orange II Degradation. In: UNSPECIFIED.

Nuruddin, M.F. and Saad, S.A. and Shafiq, N. and Ali, M. (2016) Milling time influence of ultrafine treated rice husk ash to pozzolanic reactivity in portlandite. In: UNSPECIFIED.

Nuruddin, M.F. and Malkawi, A.B. and Fauzi, A. and Mohammed, B.S. and Al-Mattarneh, H.M. (2016) Effects of alkaline solution on the microstructure of HCFA geopolymers. In: UNSPECIFIED.

Namazi-Saleh, F. and Kurian, V.J. and Mustaffa, Z. (2016) Numerical simulation of the flow passing a pipeline close to a flat seabed. In: UNSPECIFIED.

Nikbakht, E. and Mahzabin, M.S. (2016) Displacement-based design for precast post-tensioned segmental columns with different aspect ratios. In: UNSPECIFIED.

Ng, C.Y. and Ng, S.J. (2016) The effect of short-crested waves on the dynamic responses of semisubmersible: A comparison of long and short-crested waves with current. In: UNSPECIFIED.

O

Ooi, P.C. (2016) Reservoir modeling workflow of central luconia carbonate buildup. In: UNSPECIFIED.

Ooi, J.O. and Hussin, F.A.B. and Zakaria, N. (2016) Dual-Engine Cross-ISA DBTO Technique Utilising MultiThreaded Support for Multicore Processor System. In: UNSPECIFIED.

Omar, M.N.I.B. and Lubis, L.A. and Zanuri, M.N.A. and Ghosh, D.P. and Irawan, S. and Jufar, S.R. (2016) Modelling of Seismic and Resistivity Responses during the Injection of CO2 in Sandstone Reservoir. In: UNSPECIFIED.

Ooi, B.L. and Rashid, A. and Aziz, A. (2016) Modelling of Output Power Response for Switched Damping Electromagnetic Energy Harvester. In: UNSPECIFIED.

Ooi, B.L. and Gilbert, J.M. and Aziz, A.R.A. (2016) Frequency-tunable electromagnetic energy harvester by means of damping switching. In: UNSPECIFIED.

Osman, N.B. and Shamsuddin, N. and Uemura, Y. (2016) Activated Carbon of Oil Palm Empty Fruit Bunch (EFB); Core and Shaggy. In: UNSPECIFIED.

Omoregbe, O. and Danh, H.T. and Abidin, S.Z. and Setiabudi, H.D. and Abdullah, B. and Vu, K.B. and Vo, D.-V.N. (2016) Influence of Lanthanide Promoters on Ni/SBA-15 Catalysts for Syngas Production by Methane Dry Reforming. In: UNSPECIFIED.

Osman, N. and Yassin, A.Y.M. and Akbar, I. (2016) Single strap pull test of carbon fibre reinforced polymer plated steel member under fatigue loading. In: UNSPECIFIED.

Oloruntobi, O. and Madzlan, N. and Ibrahim, K. and Johnson, O. (2016) Optimal maintenance planning for trans-west africa coastal highway infrastructure using HDM-4. In: UNSPECIFIED.

Othman, I. and Napiah, M. and Nuruddin, M.F. and Klufallah, M.M.A. (2016) Effectiveness of preventive safety management in construction. In: UNSPECIFIED.

Ofei, T.N. and Al Bendary, R.M. (2016) Formulating water-based muds for high temperature wellbores using potassium formate brine and synthetic polymers: A design of experiment approach. In: UNSPECIFIED.

Ofei, T.N. and Al Bendary, R.M. (2016) Formulating water-based muds for high temperature wellbores using potassium formate brine and synthetic polymers: A design of experiment approach. In: UNSPECIFIED.

P

Pirzada, N. and Nayan, M.Y. and Hassan, M.F. and Subhan, F. and Sakidin, H. (2016) WLAN location fingerprinting technique for device-free indoor localization system. In: UNSPECIFIED.

Pradeep, M.V.K. and Balbir, S.M.S. and Norani, M.M. (2016) Performance monitoring algorithm for optimizing electrical power generated by using photovoltaic system. In: UNSPECIFIED.

Pampouchidou, A. and Pediaditis, M. and Chiarugi, F. and Marias, K. and Simos, P. and Yang, F. and Meriaudeau, F. and Tsiknakis, M. (2016) Automated characterization of mouth activity for stress and anxiety assessment. In: UNSPECIFIED.

Pirzada, N. and Nayan, M.Y. and Fadzil, M. and Subhan, F. (2016) A testbed for device free indoor localization system. In: UNSPECIFIED.

Pampouchidou, A. and Simantiraki, O. and Fazlollahi, A. and Pediaditis, M. and Manousos, D. and Roniotis, A. and Giannakakis, G. and Meriaudeau, F. and Simos, P. and Marias, K. and Yang, F. and Tsiknakis, M. (2016) Depression assessment by fusing high and low level features from audio, video, and text. In: UNSPECIFIED.

Pampouchidou, A. and Marias, K. and Tsiknakis, M. and Simos, P. and Yang, F. and Lemaitre, G. and Meriaudeau, F. (2016) Video-based depression detection using local Curvelet binary patterns in pairwise orthogonal planes. In: UNSPECIFIED.

Pasha, M. and Zaini, D. and Shariff, A.M. (2016) Physical explosion analysis in heat exchanger network design. In: UNSPECIFIED.

Parman, S. (2016) Maneuvering the attitude of precise-oriented flexible satellite using input shaper in small transient structural deflection. In: UNSPECIFIED.

Parman, S. (2016) Study on structural deflection of flexible satellite during attitude maneuver using fuel-efficient input shaper. In: UNSPECIFIED.

Purnomo, E.W. and Ghosh, D.P. (2016) Geomechanical model from subseismic resolution data. In: UNSPECIFIED.

Partoon, B. and Assadi, M.K. and Saeedi, M. (2016) Study the feasibility of a hybrid renewable energy system for power generation in Seri Iskandar. In: UNSPECIFIED.

Purnomo, E.W. and Ghosh, D.P. (2016) Optimizing full stacked PP-PS seismic data interpretation. In: UNSPECIFIED.

Prajapati, S. (2016) Attenuation or local wavefield amplification in the gas cloud ? In: UNSPECIFIED.

Pham, L.H.H.P. and Rusli, R. and Keong, L.K. (2016) Consequence Study of CO2 Leakage from Ocean Storage. In: UNSPECIFIED.

Pendyala, R. and Ilyas, S.U. and Lim, L.R. and Marneni, N. (2016) CFD Analysis of Heat Transfer Performance of Nanofluids in Distributor Transformer. In: UNSPECIFIED.

Partoon, B. and Nashed, O. and Kassim, Z. and Sabil, K.M. and Sangwai, J. and Lal, B. (2016) Gas Hydrate Equilibrium Measurement of Methane + Carbon Dioxide + Tetrahydrofuran+ Water System at High CO2 Concentrations. In: UNSPECIFIED.

Puad, N.H.A. and Nuruddin, M.F. and Lian, J.J. and Othman, I. (2016) Roof insulation material from low density polyethylene (LDPE), kapok fibre and silica aerogel. In: UNSPECIFIED.

Pakpahan, E.N. and Shafiq, N. and Isa, M.H. and Kutty, S.R.M. and Mustafa, M.R. (2016) Petroleum sludge thermal treatment and use in cement replacement � A solution towards sustainability. In: UNSPECIFIED.

Philip, A.K. and Teh, H.M. and Shafiai, S.H. and Jaafar, A. and Rashidi, A.H.M. (2016) Rheological behavior of Tsunami run-up water containing alluvial deposit at coastline of Kedah, Malaysia. In: UNSPECIFIED.

Permana, K.D. and Ariwahjoedi, B. and Shuib, A.S. (2016) Mg-1.0Zn-xca-based biodegradable cardiovascular stent alloy: A microstuctural and textural studies. In: UNSPECIFIED.

Q

Qaiyum, S. and Aziz, I.A. and Jaafar, J.B. (2016) Analysis of Big Data and Quality-of-Experience in High-Density Wireless Network. In: UNSPECIFIED.

Qayyum, A. and Shoaib, M. and Faye, I. and Kashif, A.R. (2016) Refinements of some new efficient quadrature rules. In: UNSPECIFIED.

Qidwai, U. and Shakir, M. and Bahameish, M. (2016) Real-time robotic avatar control using fuzzy gaze-classification for people with disability. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Naufal, M. and Saad, M. and Mazher, M. and Rasheed, W. and Abdullah, T.A.R.B.T. (2016) Designing of disparity map based on hierarchical dynamic programming using satellite stereo imagery. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Nuafal, M. and Mazher, M. and Ahmad, R.F. and Abdullah, M.F. (2016) Evaluation of optimization algorithms for sparse and redundant dictionaries. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Naufal, M. and Saad, M. and Mazher, M. and Abdullah, F. and Abdullah, T.A.R.B.T. (2016) Designing of overcomplete dictionaries based on DCT and DWT. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Saad, M.N.B.M. (2016) Evaluation of digital elevation model using rational polynomial coefficient based on HR Pleiades satellite stereo imagery. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Saad, M.N.B.M. and Abdullah, F. and Iqbal, M. (2016) Disparity map estimation based on optimization algorithms using satellite stereo imagery. In: UNSPECIFIED.

Qadir, D. and Mukhtar, H. and Keong, L.K. (2016) Synthesis and Characterization of Polyethersulfone/Carbon Molecular Sieve Based Mixed Matrix Membranes for Water Treatment Applications. In: UNSPECIFIED.

Quraishi, K.S. and Krishnan, S. and Bustam, M.A. and Uemura, Y. and Wilfred, C.D. and Leveque, J.M. (2016) Study of the Toxicity of Ionic Liquids towards Green Microalgae to Enable Two Phase Partitioning Bio Reactors Applications. In: UNSPECIFIED.

Qasim, S. and Harahap, I.S.H. and Baharom, S. and Imran, M. and Kazmi, D. (2016) Investigating the potential of soil-nail retaining structures as a slope strengthening remedy by capitalizing on reliability analysis technique. In: UNSPECIFIED.

R

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2016) Random Forest Forecast (RFF): One hour ahead jobs in volunteer grid. In: UNSPECIFIED.

Razali, R. and Khan, H. and Shafie, A. and Hassan, A.R. (2016) The relationship between energy consumption and economic growth in Malaysia: ARDL bound test approach. In: UNSPECIFIED.

Rehman, Z.U. and Yahya, N. and Shafie, A. and Soleimani, H. and Alqasim, B.H. and Irfan, M. and Qureshi, S. (2016) Band gap and conductivity evaluation of carbon nanotube with hematite for green ammonia synthesis. In: UNSPECIFIED.

Rehman, W.U. and Bhat, A.H. and Suliamon, A.A. and Khan, I.U. and Ullah, H. (2016) Effect of volumetric concentration of MWCNTs on the stability and thermal conductivity of nanofluids. In: UNSPECIFIED.

Rahman, N.A.A. and Leveque, J.M. and Mutalib, M.I.A. and Ghani, N.A. and Thangarajoo, N. and Mazlan, F.A. and Farooq, A. and Irfan, N. and Duclaux, L. and Reinert, L. and Ondarts, M. (2016) Adsorption of indoor toxic gas by ionic liquid impregnated activated carbons. In: UNSPECIFIED.

Rostami, A. and Soleimani, H. and Yahya, N. and Nyamasvisva, T.E. and Rauf, M. (2016) A study of electric field components in shallow water and water half-space models in seabed logging. In: UNSPECIFIED.

Rehman, M.J.U. and Dass, S.C. and Asirvadam, V.S. (2016) Nonlinear dynamical system identification using unscented Kalman filter. In: UNSPECIFIED.

Rabih, A.A.S. and Dennis, J.O. and Khir, M.H.M. and Ahmed, M.G. and Mian, M.U. (2016) Design of PolyMUMPS device for diabetes screening via acetone vapor detection in exhaled breath. In: UNSPECIFIED.

Raju, S.S.K. and Narahari, M. and Pendyala, R. (2016) Mathematical modelling of unsteady MHD natural convection flow past a vertical plate with variable surface temperature and mass flux in the presence of radiation and chemical reaction. In: UNSPECIFIED.

Rostami, A. and Soleimani, H. and Yahya, N. and Nyamasvisva, T.E. and Rauf, M. (2016) The impact of airwave on tangential and normal components of electric field in seabed logging data. In: UNSPECIFIED.

Rajalingam, S. and Vasant, P. and Khe, C.S. and Merican, Z. and Oo, Z. (2016) Optimization of injection molding process parameters for a plastic cell phone housing component. In: UNSPECIFIED.

Rizwan, M. and Dass, S.C. and Sagayan, V. (2016) Visualization and detection of spatio-temporal hot-spot and cluster for dengue in Petaling district, Malaysia. In: UNSPECIFIED.

Rao, P.S. and Ramachandran, P. and Jebaraj, S. (2016) Models for selecting GMA Welding Parameters for Improving Mechanical Properties of Weld Joints. In: UNSPECIFIED.

Rashidi, M. and Marhamati, M. and Bharadwaj, A.M. (2016) A case study of challenges we have in pore pressure prediction techniques for a carbonate reservoir. In: UNSPECIFIED.

Rashidi, M. and Mombekov, B. and Marhamati, M. (2016) A study of a novel inter pipe coating material for paraffin wax deposition control and comparison of the results with current mitigation technique in oil and gas industry. In: UNSPECIFIED.

Rahmanian, N. and Halmi, M.H. and Choy, D. and Patel, R. and Yusup, S. and Mujtaba, I.M. (2016) An experimental investigation on seeded granulation of detergent powders. In: UNSPECIFIED.

Rosli, N.S. and Ibrahim, R. and Ismail, I. (2016) Intelligent Prediction System for Gas Metering System using Particle Swarm Optimization in Training Neural Network. In: UNSPECIFIED.

Razak, M.A. and Abdul-Rani, A.M. and Rao, T.V.V.L.N. and Pedapati, S.R. and Kamal, S. (2016) Electrical Discharge Machining on Biodegradable AZ31 Magnesium Alloy Using Taguchi Method. In: UNSPECIFIED.

Rashid, T. and Kait, C.F. and Murugesan, T. (2016) Effect of Temperature on Molecular Weight Distribution of Pyridinium Acetate Treated Kraft Lignin. In: UNSPECIFIED.

Rabat, N.E. and Hashim, S. and Majid, R.A. (2016) Effect of Different Monomers on Water Retention Properties of Slow Release Fertilizer Hydrogel. In: UNSPECIFIED.

Rashidi, N.A. and Yusup, S. and Borhan, A. (2016) Isotherm and Thermodynamic Analysis of Carbon Dioxide on Activated Carbon. In: UNSPECIFIED.

Rahmiati, T. and Azizli, K. and Man, Z. (2016) Development of Non Sodium Silicate Flyash-based Geopolymer Film for Preliminary Urea Diffusion Study. In: UNSPECIFIED.

Ramli, R.M. and Kait, C.F. and Omar, A.A. (2016) Remediation of DIPA Contaminated Wastewater Using Visible Light Active Bimetallic Cu-Fe/TiO2 Photocatalyst. In: UNSPECIFIED.

Rozali, N.E.M. and Yahaya, M.S.M. (2016) Study of the Effects of Seasonal Climate Variations on Hybrid Power Systems Using Power Pinch Analysis. In: UNSPECIFIED.

Ramli, N.M. (2016) Tuning and Control Strategies for a Debutanizer Column. In: UNSPECIFIED.

Rashid, Z. and Wilfred, C.D. and Murugesan, T. (2016) Asphaltene Separation with Designer Solvents for the Deasphaltenes Process-A Quantum Chemical Approach. In: UNSPECIFIED.

Rashid, T. and Kait, C.F. and Murugesan, T. (2016) A "fourier Transformed Infrared" Compound Study of Lignin Recovered from a Formic Acid Process. In: UNSPECIFIED.

Rini, N. and Kurian, V.J. and Liew, M.S. and Whyte, A. (2016) Coupled analysis for the effect of wave height on FPSO motions. In: UNSPECIFIED.

Rehman, S. and Ali, S.S. and Adil, S.H. (2016) Wind farm layout design using cuckoo search algorithm. In: UNSPECIFIED.

S

Sohail, A. and Dominic, P.D.D. (2016) Process warehouse based agent's competencies measurement method for business process improvement. In: UNSPECIFIED.

Savita, K.S. and Dominic, P.D.D. and Ramayah, T. (2016) An insight on survey questionnaire design for Green SCM: Using cognitive interviewing method. In: UNSPECIFIED.

Sarlan, A. and Hashim, A.S. and Ahmad, R. and Ahmad, W.F.W. and Mahamad, S. and Basri, S. and Astrini, S. (2016) An interactive Islamic mobile application for children - 'Hidup Cara Rasullullah'. In: UNSPECIFIED.

Savita, K.S. and Thivaanraj, Y.M. and Subarna, S. and Manoranjitham, M. (2016) User perception on environmental friendly practices among primary schoolchildren in Perak. In: UNSPECIFIED.

Saedi, A. (2016) Cloud computing adoption framework: Innovation translation approach. In: UNSPECIFIED.

Shahabuddin, M.Z. and Hasbullah, H. and Aziz, I.A. (2016) Preliminary framework of topology control algorithm in WSN to achieve node's energy efficiency. In: UNSPECIFIED.

Sulaiman, S. and Okere, H.C. and Awang, D.R.R. and Mean, F.O. (2016) Expert review of the multimodal interaction model for Foot Reflexology VRST application. In: UNSPECIFIED.

Sangodiah, A. and Ahmad, R. and Ahmad, W.F.W. (2016) Integration of machine learning approach in item bank test system. In: UNSPECIFIED.

Selamat, M.H. and Rais, H.M. (2016) Enhancement on image face recognition using Hybrid Multiclass SVM (HM-SVM). In: UNSPECIFIED.

Syed Najmuddin, S.M.S. and Md Yusof, M.A. (2016) Screening of Geomechanical Risks for Malaysian Development Field. In: UNSPECIFIED.

Soleimani, H. and Latiff, N.R.A. and Zaid, H.M. and Yahya, N. and Sadrolhosseini, A.R. and Adil, M. (2016) Influence of cobalt substitution on the structural and magnetic properties of cobalt substituted magnetite. In: UNSPECIFIED.

Selvaraj, G. and Wilfred, C.D. and Eang, N.K. (2016) Recrystallized quinolinium ionic liquids for electrochemical analysis. In: UNSPECIFIED.

Shoaib, M. and Basit, A. and Faye, I. (2016) Multi-resolution analysis for ear recognition using wavelet features. In: UNSPECIFIED.

Shoieb, M.A. and Sum, C.W. and Bhattachary, S.K. and Abidin, N.S.Z. and Abdelrahim, O.B. (2016) Shale gas characterization of the Dinder and Blue Nile Formations in the Blue Nile Basin, East Sudan. In: UNSPECIFIED.

Shafie, A. and Pransisco, P. and Guan, B.H. and Annur, R. (2016) Synthesis and characterization of Ni0.5Zn0.4Cu0.1Fe2O4 as a magnetic feeder for electromagnetic transmitter application. In: UNSPECIFIED.

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. (2016) Highly oriented graphene growth and characterization. In: UNSPECIFIED.

Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2016) Effect of electrode gap on the sensing properties of multiwalled carbon nanotubes based gas sensor. In: UNSPECIFIED.

Sulong, T.S.T. and Zabidi, N.A.M. and Shaharun, M.S. (2016) Pretreatment of carbon nanotubes: Effects on its properties and catalytic performances. In: UNSPECIFIED.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Ullah, S. and Naz, M.Y. (2016) Effective CO2 adsorption on pristine and chemically functionalized MWCNTs. In: UNSPECIFIED.

Sardar, S. and Wilfred, C.D. and Marc, L.J. (2016) Synthesis of task specific and reusable protic ionic liquids for one-pot multicomponent syntheses. In: UNSPECIFIED.

Sakidin, H. and Jahan, S. and Nazar, R.M. (2016) Mixed convection flow past through a stretching cylinder with heat generation/absorption and convective boundary condition. In: UNSPECIFIED.

Shaharun, M.S. and Shaharun, S. and Al-Shaibani, A. (2016) Effect of zirconia on the physicochemical properties of copper (II) imidazolate frameworks. In: UNSPECIFIED.

Sakidin, H. and Batcha, S.R. and Ahmad, A. (2016) Simpler component of non-hydrostatic UNBabc mapping function using nonlinear curve fitting method. In: UNSPECIFIED.

Siddiqui, M.I. and Aziz, A.R.A. and Heikal, M.R. (2016) Dynamics of liquid slug using particle image velocimetry technique. In: UNSPECIFIED.

Serasa, A.S. and Lai, G.T. and Rafek, A.G. and Simon, N. and Hussein, A. and Ern, L.K. and Surip, N. and Mohamed, T.R. (2016) Development of empirical correlation of peak friction angle with surface roughness of discontinuities using tilt test. In: UNSPECIFIED.

Sazali, S.S. and Bakar, Z.A. and Jaafar, J. (2016) Word prediction algorithm in resolving ambiguity in Malay text. In: UNSPECIFIED.

Strubel, D. and Bastourous, M. and Morel, O. and Saad, N.M. and Fofi, D. (2016) Sub-optimal waypoints, UAV path planning and mosaicing application. In: UNSPECIFIED.

Safdar, T. and Hasbulah, H.B. and Rehan, M. (2016) Effect of reinforcement learning on routing of cognitive radio ad-hoc networks. In: UNSPECIFIED.

Sarlan, A. and Xiong, F.K. and Ahmad, R. and Ahmad, W.F.W. and Bhattacharyya, E. (2016) Pre-hospital emergency notification system. In: UNSPECIFIED.

Socheatra, S. and Wen, W.P. and Cheong, L.Y. (2016) Highly selective bandstop filter using finite Q resonators. In: UNSPECIFIED.

Suleman, H. and Maulud, A.S. and Man, Z. (2016) Solubility prediction of carbon dioxide in water by an iterative equation of state/excess Gibbs energy model. In: UNSPECIFIED.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2016) Development and performance evaluation of Polydimethyl siloxane/Polysulfone (PDMS/PSF) composite membrane for CO2/CH4 separation. In: UNSPECIFIED.

Suleman, H. and Maulud, A.S. and Man, Z. (2016) Performance evaluation of carbon dioxide-alkanolamine- water system by equation of state/excess Gibbs energy models. In: UNSPECIFIED.

Syed, Z.I. and Mendis, P. and Rahman, S.A. (2016) Effect of large negative phase of blast loading on structural response of RC elements. In: UNSPECIFIED.

Shukla, V. and Ali, N.B.B.Z. and Hussin, F.A. and Hamid, N.H. and Sheikh, M.A. (2016) Fault Modeling and Simulation of MEDA Based Digital Microfluidics Biochips. In: UNSPECIFIED.

Sarwar, M.B. and Nallagownden, P. and Baharudin, Z. and Muthuvalu, M.S. (2016) Review of different techniques used for wireless transmission of electrical energy. In: UNSPECIFIED.

Said, M.A.M. and Osman, M.H. and Yusoff, P.S.M.M. and Sulaiman, S.A. and Ghazali, S.M.A.S.A. (2016) Determination of remaining useful life of gas turbine blade. In: UNSPECIFIED.

Safiyullah, F. and Sulaiman, S.A. and Zakaria, N. and Jasmani, M.S. and Ghazali, S.M.A. (2016) Modeling the isentropic head value of centrifugal gas compressor using genetic programming. In: UNSPECIFIED.

Selamat, M.H. and Md Rais, H. (2016) Image face recognition using Hybrid Multiclass SVM (HM-SVM). In: UNSPECIFIED.

Subramaniam, R.D. and Prajapati, S. and Ghosh, D.P. (2016) Fracture analysis using multicomponent 3c seismic data. In: UNSPECIFIED.

Setvati, M.R. and Mustaffa, Z. and Shafiq, N. and Isnadi, B. and Syed, Z.I. (2016) Finite element modeling of wet lay-up CFRP patch repaired corroded offshore steel jacket member. In: UNSPECIFIED.

Shah Riman, N.I. and Abdullah, M.F. and Romlie, M.F. and Baharudin, Z. (2016) Third harmonic current contribution from synchronous generator with filtering during ground fault. In: UNSPECIFIED.

Sambo, C.H. and Hematpour, H. and Danaei, S. and Herman, M. and Ghosh, D.P. and Abass, A. and Elraies, K.A. (2016) An integrated reservoir modelling and evolutionary algorithm for optimizing field development in a mature fractured reservoir. In: UNSPECIFIED.

Saeidi, T. and Ismail, I. and Alhawari, A.R.H. and Sali, A. and Ismail, A. (2016) High gain dual-band couple feed transparent THz antenna for satellite communications. In: UNSPECIFIED.

Shahbaz, M. and Yusup, S. and Pratama, A. and Inayat, A. and Patrick, D.O. and Ammar, M. (2016) Parametric study and optimization of methane production in biomass gasification in the presence of coal bottom ash. In: UNSPECIFIED.

Subhani, A.R. and Malik, A.S. and Kamil, N. and Saad, M.N.M. (2016) Difference in brain dynamics during arithmetic task performed in stress and control conditions. In: UNSPECIFIED.

Socheatra, S. and Wen, W.P. and Sovuthy, C. (2016) Lossy reflection mode dual-band bandstop prototype network based on hybrid elliptic filtering function. In: UNSPECIFIED.

Sellappah, V. and Uemura, Y. and Hassan, S. and Sulaiman, M.H. and Lam, M.K. (2016) Torrefaction of Empty Fruit Bunch in the Presence of Combustion Gas. In: UNSPECIFIED.

Safdar, R. and Thanabalan, M. and Omar, A.A. (2016) Solubility of CO2 in 20 Wt. Aqueous Solution of Piperazine. In: UNSPECIFIED.

Sundramoorthy, J.D. and Hammonds, P. and Lal, B. and Phillips, G. (2016) Gas Hydrate Gas Hydrate Equilibrium Measurement and Observation of Gas Hydrate Dissociation with/without a KHI. In: UNSPECIFIED.

Suleman, H. and Maulud, A.S. and Man, Z. (2016) Modified e-LCVM EoS/GE Thermodynamic Model for Carbon Dioxide - MDEA - Water System. In: UNSPECIFIED.

Siyal, A.A. and Azizli, K.A. and Man, Z. and Ullah, H. (2016) Effects of Parameters on the Setting Time of Fly Ash Based Geopolymers Using Taguchi Method. In: UNSPECIFIED.

Sani, N.A.M. and Man, Z. and Shamsuddin, R.M. and Azizli, K.A. and Shaari, K.Z.K. (2016) Determination of Excess Sodium Hydroxide in Geopolymer by Volumetric Analysis. In: UNSPECIFIED.

Shariff, A.M. and Shaikh, M.S. and Bustam, M.A. and Garg, S. and Faiqa, N. and Aftab, A. (2016) High-pressure Solubility of Carbon Dioxide in Aqueous Sodium L- Prolinate Solution. In: UNSPECIFIED.

Shah, M.U.H. and Sivapragasam, M. and Moniruzzaman, M. and Yusup, S.B. (2016) A comparison of Recovery Methods of Rhamnolipids Produced by Pseudomonas Aeruginosa. In: UNSPECIFIED.

Sulaiman, M.H. and Uemura, Y. and Azizan, M.T. (2016) Torrefaction of Empty Fruit Bunches in Inert Condition at Various Temperature and Time. In: UNSPECIFIED.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2016) Characterization and Performance Evaluation of PDMS/PSF Membrane for CO2/CH4 Separation under the Effect of Swelling. In: UNSPECIFIED.

Sikander, U. and Sufian, S. and Salam, M.A. (2016) Synthesis and Structural Analysis of Double Layered Ni-Mg-Al Hydrotalcite Like Catalyst. In: UNSPECIFIED.

Singh, H.K.A.P.G. and Yusup, S. and Wai, C.K. (2016) Physicochemical Properties of Crude Rubber Seed Oil for Biogasoline Production. In: UNSPECIFIED.

Suleman, H. and Maulud, A.S. and Man, Z. (2016) Carbon Dioxide Solubility in Aqueous Potassium Lysinate Solutions: High Pressure Data and Thermodynamic Modeling. In: UNSPECIFIED.

Saad, S.A. and Nuruddin, M.F. and Shafiq, N. and Ali, M. (2016) The Effect of Incineration Temperature to the Chemical and Physical Properties of Ultrafine Treated Rice Husk Ash (UFTRHA) as Supplementary Cementing Material (SCM). In: UNSPECIFIED.

Shamsuddin, R.M. and Verbeek, C.J.R. and Lay, M.C. (2016) Settling of Bentonite Particles in Gelatin Solutions for Stickwater Treatment. In: UNSPECIFIED.

Syed Osman, S.B. and Jusoh, H. and Chai, K. (2016) The behaviour of electrical resistivity correlated with converted SPT-N results from seismic survey. In: UNSPECIFIED.

Sapari, N. and Jusoh, H. and Olisa, E. and Ezechi, E.H. (2016) Sulfide precipitation as treatment for iron rich groundwater. In: UNSPECIFIED.

Shahruzzaman, D.B. and Hashim, A.M. (2016) Tsunami risk assessment: How safe is Malaysia? In: UNSPECIFIED.

Shafiq, N. and Nuruddin, M.F. and Elshekh, A.E.A. (2016) Behaviour of structural properties of fiber reinforced high strength concrete beams subjected to static loads. In: UNSPECIFIED.

Seo, J.H. and Choi, H.S. and Park, K.S. and Yu, S.Y. and Kim, D.K. (2016) A simplified prediction method for subsea pipeline expansion. In: UNSPECIFIED.

Shafiq, N. and Ayub, T. and Khan, S.U. (2016) 3D nonlinear finite element analysis of HPFRC beams containing PVA fibers. In: UNSPECIFIED.

Syed, Z.I. and Mohamed, O.A. and Rahman, S.A. (2016) Non-linear Finite Element Analysis of Offshore Stainless Steel Blast Wall under High Impulsive Pressure Loads. In: UNSPECIFIED.

Sadikun, S.M. and Darma, J. and Sukmadilaga, C. and Hassan, R. and Abdul Gafur, I.F. and Arifin, M.A. (2016) The effect of clarity of business vision and top management support on the quality of business intelligence systems: Evidence from Indonesia. In: UNSPECIFIED.

T

Tahir, H.M. and Said, A.M. and Osman, N.H. and Zakaria, N.H. and Sabri, P.N.M. and Katuk, N. (2016) Improving K-Means Clustering using discretization technique in Network Intrusion Detection System. In: UNSPECIFIED.

Tomi, A.B. and Rambli, D.R.A. (2016) Automated calibration for optical see-through head mounted display using display screen space based eye tracking. In: UNSPECIFIED.

Thangiah, M. and Basri, S. (2016) A preliminary analysis of various testing techniques in Agile development - A systematic literature review. In: UNSPECIFIED.

Tippa, S. and Narahari, M. and Pendyala, R. (2016) Unsteady natural convection flow of nanofluids past a semi-infinite isothermal vertical plate. In: UNSPECIFIED.

Thiruchelvam, L. and Asirvadam, V.S. and Dass, S.C. and Daud, H. and Gill, B.S. (2016) Sliding window correlation analysis for dengue-climate variable relationship. In: UNSPECIFIED.

Takaijudin, H. and Ghani, A.A. and Zakaria, N.A. and Tze, L.L. (2016) Performance of Elaeis Guineensis Leaves Compost in Filter Media for Stormwater Treament Through Column Study. In: UNSPECIFIED.

Tageldeen, M.K. and Elamvazuthi, I. and Perumal, N. (2016) Motion control for a multiple input rehabilitation wearable exoskeleton using fuzzy logic and PID. In: UNSPECIFIED.

Tang, T.B. and Noor, N.H.M. (2016) Towards wearable active humidifier for dry eyes. In: UNSPECIFIED.

Tahan-Bouria, M. and Muhammad, M. and Abdul Karim, Z.A. (2016) Adaptive neuro-fuzzy inference system for performance health monitoring of industrial gas turbines. In: UNSPECIFIED.

Tyng, C.M. and Amin, H.U. and Saad, M.N.M. and Malik, A.S. and Kang, K. (2016) EEG coherence and source localization analysis during multimedia learning process. In: UNSPECIFIED.

Taqvi, S.A. and Tufa, L.D. and Muhadizir, S. (2016) Optimization and Dynamics of Distillation Column Using Aspen Plus®. In: UNSPECIFIED.

Tran, N.T.T. and Uemura, Y. and Ramli, A. (2016) Hydrodeoxygenation of Guaiacol over Al-MCM-41 Supported Metal Catalysts: A Comparative Study of Co and Ni. In: UNSPECIFIED.

Tuan, T.T. and Tufa, L.D. and Mutalib, M.I.A. and Abdallah, A.F.M. (2016) Control of Depropanizer in Dynamic Hysys Simulation Using MPC in Matlab-Simulink. In: UNSPECIFIED.

Tay, W.H. and Lau, K.K. and Shariff, A.M. (2016) Numerical Simulation for Dehydration of Natural Gas using Joule Thompson Cooling Effect. In: UNSPECIFIED.

Thanh, N.T. and Uemura, Y. and Krishnan, V. and Ismail, L. (2016) The Effect of Air Injection Rate and Medium Nitrogen Concentration on Cell Biomass and Lipid Content of Scenedesmus Quadricauda in Flat Plate Photobioreactor. In: UNSPECIFIED.

Tzi, E.C.N. and Ching, O.P. (2016) Surface modification of AMH-3 for development of mixed matrix membranes. In: UNSPECIFIED.

Tufa, L.D. and Ka, C.Z. (2016) Effect of Model Plant Mismatch on MPC Performance and Mismatch Threshold Determination. In: UNSPECIFIED.

Tan, L.S. and Shariff, A.M. and Lau, K.K. and Shaikh, M.S. and Murshid, G. (2016) High Pressure Rheology and Viscosity of Monoethanolamine with n-Methyl-2-Pyrrolidone and Water Hybrid Solvent. In: UNSPECIFIED.

Trinh, T.H. and Kushaari, K. (2016) Dynamic of Water Absorption in Controlled Release Fertilizer and its Relationship with the Release of Nutrient. In: UNSPECIFIED.

Tuhaijan, S.N.A. and Ng, C.Y. and Kurian, V.J. (2016) The effect of current on the dynamic responses of truss spar in Malaysia water. In: UNSPECIFIED.

U

Ullah, R. and Said, A.B.M. and Saleem, M.Q. and Jaafar, J. and Ullah, I. (2016) Semantic ontology for annotated images. In: UNSPECIFIED.

Usama, M. and Zakaria, N. (2016) Chaos-based secure data compression (CSDC). In: UNSPECIFIED.

Usmani, M. and Adil, S.H. and Raza, K. and Ali, S.S.A. (2016) Stock market prediction using machine learning techniques. In: UNSPECIFIED.

Ur Rehman, M.J. and Dass, S.C. and Asirvadam, V.S. (2016) Markov chain Monte Carlo (MCMC) method for parameter estimation of nonlinear dynamical systems. In: UNSPECIFIED.

Ur Rehman, M.J. and Dass, S.C. and Asirvadam, V.S. and Adly, A. (2016) Parameter estimation for nonlinear disease dynamical system using particle filter. In: UNSPECIFIED.

Uddin, M. and Romlie, M.F. and Abdullah, M.F. (2016) Feasibility study of grid connected solar home system: The perspective of Malaysia. In: UNSPECIFIED.

Uddin, F. and Tufa, L.D. and Yousif, S.M.T. and Maulud, A.S. (2016) Comparison of ARX and ARMAX Decorrelation Models for Detecting Model-Plant Mismatch. In: UNSPECIFIED.

Ullah, H. and Azizli, K. and Man, Z.B. and Ismail, M.B.C. (2016) Synthesis and Characterization of Urea-formaldehyde Microcapsules Containing Functionalized Polydimethylsiloxanes. In: UNSPECIFIED.

Ullah, Z. and Bustam, M.A. and Man, Z. and Khan, A.S. (2016) Thermal Stability and Kinetic Study of Benzimidazolium Based Ionic Liquid. In: UNSPECIFIED.

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Salihi, I.U. (2016) Ranking of principal causes of construction waste for malaysian residential project. In: UNSPECIFIED.

W

Wagan, A.A. and Jung, L.T. (2016) An efficient distributed mobility management scheme for network mobility. In: UNSPECIFIED.

Wee, S.C. and Md Akhir, N.A. and Rozman, A.L. (2016) Investigation of Nanoparticles Dispersion in Sodium Hydroxide (NaOH) Solvent. In: UNSPECIFIED.

Wai, P.S. and Kun, S.S. and Ismail, M.T. and Karim, S.A.A. (2016) Model performance between linear vector autoregressive and Markov switching vector autoregressive models on modelling structural change in time series data. In: UNSPECIFIED.

Wagan, A.A. and Jung, L.T. (2016) A reliable and intelligent protocol for distributed data mining architecture in sporadic wireless sensor network. In: UNSPECIFIED.

Woldemichael, D.E. and Hashim, F.M. and Ovinis, M. and Lee, W.C. and Bin Mohd Halim, M.H. (2016) Modelling and Simulation of Free Floating Pig for Different Pipeline Inclination Angles. In: UNSPECIFIED.

Wani, J.R. and Baheta, A.T. and Woldeyohannes, A.D. and Hassan, S. (2016) Analysis of Refrigeration Cycle Performance with an Ejector. In: UNSPECIFIED.

Wong, P.W. and Zee, E. and Soeung, S. and Cheab, S. (2016) A new class of microwave dual-band filter based on hybrid Chebyshev polynomials. In: UNSPECIFIED.

Wahab, S.N.A. and Mohammed, N.I. and Khamidi, M.F. and Ahmad, N.A. and Noor, Z.M. and Ghani, A.A.A. and Ismail, M.R. (2016) Sampling and Identifying of Mould in the Library Building. In: UNSPECIFIED.

Wahid, A. and Salim, A.M.A. and Gaafar, G.R. and Yusoff, A.W.I.W. (2016) Tectonic development of the Northwest Bonaparte Basin, Australia by using Digital Elevation Model (DEM). In: UNSPECIFIED.

Wahid, A. and Salim, A.M.A. and Gaafar, G.R. and Yusoff, W.I.W. (2016) The geostatistical approach for structural and stratigraphic framework analysis of offshore NW Bonaparte Basin, Australia. In: UNSPECIFIED.

Wahab, N.W.A. and Sufian, S. and Van Nguyen, T.D. and Shaharun, M.S. (2016) Comparative Studies of Pristine and Functionalized CNFs Surface Properties and their Performance in Iron Distribution. In: UNSPECIFIED.

Wahab, S.N.A. and Mohammed, N.I. and Khamidi, M.F. and Noor, Z.M. and Ismail, M. (2016) Analysis of mould growth contamination in library building. In: UNSPECIFIED.

Wan Salim, W.S. and Liew, M.S. and Shafie, A. (2016) Fault tree analysis for reinforced concrete highway bridge defect. In: UNSPECIFIED.

Wahab, M.M.A. and Kamal, A.R.M.M. and Kurian, V.J. (2016) Incremental wave analysis method: An alternative to load factor method in SACS pushover analysis. In: UNSPECIFIED.

Wong, L.-P. and Isa, M.H. and Bashir, M.J.K. (2016) Use of low frequency ultrasound for solids solubilization in palm oil mill effluent. In: UNSPECIFIED.

Wanyusof, K. and Riahi, A. and Sapari, N. and Isa, M.H. and Zahari, N.A.M. and Olisa, E. and Khouna, K.M. and Singh, B.S.M. (2016) The performance investigation of three glass cover solar stills using different basin absorbents. In: UNSPECIFIED.

Wahab, M.M.A. and Kurian, V.J. and Liew, M.S. and Nizamani, Z. and Kim, D.K. (2016) Structural reliability analysis using quadratic polynomial response surface and finite element in MATLAB. In: UNSPECIFIED.

X

Xiaoming, Z. and Sato, A. and Kudo, Y. and Nakamura, T. and Okitsu, J. and Aoki, H. and Majid, M.A.A. (2016) A case study of electric chiller performance bottleneck diagnosis by root cause analysis. In: UNSPECIFIED.

Xiaoming, Z. and Sato, A. and Kudo, Y. and Okitsu, J. and Nakamura, T. and Abd Majid, M.A. (2016) Energy efficient operation based on root cause analysis for multiple-chiller plant. In: UNSPECIFIED.

Y

Yussif, A.-S. and Ahmad, W.F.W. and Mustapha, E.E. (2016) The impact of electronic collaboration on learning outcomes. In: UNSPECIFIED.

Yussiff, A.-L. and Suet-Peng, Y. and Baharudin, B.B. (2016) Human action recognition in surveillance video of a computer laboratory. In: UNSPECIFIED.

Yusuf, B.K. and Mahmood, A.K. and Sulaiman, S. (2016) Towards cryptanalysis of prime numbers. In: UNSPECIFIED.

Yunus, N.M. and Shaharun, M.S. and Mutalib, M.I.A. and Murugesan, T. (2016) Modeling of CO2 solubility in pyridinium-based ionic liquids using UNIQUAC. In: UNSPECIFIED.

Yasar, M. and Mohamed, N.M. and Hamid, N.H. and Shuaib, M. (2016) Pressure sensor based on pristine multi-walled carbon nanotubes forest. In: UNSPECIFIED.

Yar, A. and Dennis, J.O. and Mohamed, N.M. and Mian, M.U. and Irshad, M.I. and Mumtaz, A. (2016) Copper oxide nanowires as better performance electrode material for supercapacitor application. In: UNSPECIFIED.

Yahya, E.A. and Zabidi, N.A.M. and Kait, C.F. (2016) A study on coke deposition in Ni-based catalysts for CO2 reforming of methane. In: UNSPECIFIED.

Yusuf, N.R. and Kamil, R.N.M. and Yusup, S. (2016) Kinetic study of microwave-assisted alkaline hydrolysis of Jatropha curcas oil. In: UNSPECIFIED.

Yahya, N. and Irfan, M. and Shafie, A. and Soleimani, H. and Alqasem, B. and Rehman, Z.U. and Qureshi, S. (2016) DFT study of gases adsorption on sharp tip nano-catalysts surface for green fertilizer synthesis. In: UNSPECIFIED.

Yi, L.Z. and Singh, B.S.M. and Ching, D.L.C. and Jin, C.L.E. (2016) Development of algorithm for single axis sun tracking system. In: UNSPECIFIED.

Yussiff, A.-L. and Yong, S.-P. and Baharudin, B.B. (2016) Human tracking in video surveillance using particle filter. In: UNSPECIFIED.

Yussiff, A.-S. and Ahmad, W.F.W. and Mustapha, E.E. (2016) Testing and validating a conceptual framework for e-collaboration in an undergraduate course. In: UNSPECIFIED.

Yoong, A.A. and Lubis, L.A. and Ghosh, D.P. (2016) Application of Simultaneous Inversion Method to Predict the Lithology and Fluid Distribution in "x" Field, Malay Basin. In: UNSPECIFIED.

Yusoff, H.H.M. and Razak, K.A. and Yuen, F. and Harun, A. and Talib, J. and Mohamad, Z. and Ramli, Z. and Razab, R.A. (2016) Mapping of post-event earthquake induced landslides in Sg. Mesilou using LiDAR. In: UNSPECIFIED.

Yusnenti, F.M.Y. and Othman, M. and Mustapha, M. and MohdYusri, I. (2016) Silicanizing Process on Mild Steel Substrate by Using Tronoh Silica Sand: Microstructure, composition and coating growth. In: UNSPECIFIED.

Yanti, D.K. and Yusoff, M.Z. and Bekdash, M. and Asirvadam, V.S. (2016) Single trial visual evoked potential extraction using fast PLS. In: UNSPECIFIED.

Yousif, A.A. and Sulaiman, S.A. and Nasif, M.S. (2016) An experimental measurement on laminar burning velocities and markstein length of iso-butane-air mixtures at ambient conditions. In: UNSPECIFIED.

Yasir, B. and Ghosh, D.P. and Yaser, S. and Alashloo, M. and Sum, C.W. (2016) Seismic modeling and imaging using wave theory for fault and fracture identification. In: UNSPECIFIED.

Yusuf, N.R. and Kamil, R.N.M. and Yusup, S. (2016) Synthesis and characterization of fatty acids using microwave assisted in alkaline hydrolysis Jatropha curcas oil. In: UNSPECIFIED.

Yong, P.K. and Ho, E.T.W. (2016) Streaming brain and physiological signal acquisition system for IoT neuroscience application. In: UNSPECIFIED.

Yan, T.K. and Nagai, A. and Michida, W. and Kusakabe, K. and Yusup, S.B. (2016) Crystal Growth of Cyclodextrin-based Metal-organic Framework for Carbon Dioxide Capture and Separation. In: UNSPECIFIED.

Yaqub, S. and Pei, L.S. and Mellon, N. and Shariff, A.M. (2016) Performance Evaluation of Covalent Organic Polymer Adsorbent Prepared via Microwave Technique for CO2 and CH4 Adsorption. In: UNSPECIFIED.

Yunita, P. and Irawan, S. and Kania, D. (2016) Optimization of Water-based Drilling Fluid Using Non-ionic and Anionic Surfactant Additives. In: UNSPECIFIED.

Yi, C.Y. and Mahadzir, S.B. (2016) Modeling of Multiple Reversible Reaction System. In: UNSPECIFIED.

Yusof, S.M.M. and Yahya, W.Z.N. (2016) Binary Ionic Liquid Electrolyte for Dye-Sensitized Solar Cells. In: UNSPECIFIED.

Yasir, M. and Azizan, M.T. and Ramli, A. and Ameen, M. (2016) Hydroprocessing of Crude Jatropha Oil Using Hierarchical Structured TiO2 Nanocatalysts. In: UNSPECIFIED.

Z

Zain, M.Z.M. and Rani, A.M.A. and Majid, M.A.A. (2016) Analysis of reconfigurable assembly system framing systems in automotive industry. In: UNSPECIFIED.

Zulkafi, A.Z. and Basri, S. and Jung, L.T. and Ahmad, R. (2016) Android based car alert system. In: UNSPECIFIED.

Zubir, W.M.A.M. and Aziz, I.A. and Haron, N.S. and Jaafar, J. and Mehat, M. (2016) CO2 corrosion rate determination mechanism implementing de Waard-Milliams model for oil & gas pipeline. In: UNSPECIFIED.

Zahari, A.S. and Rahim, L.A. and Mehat, M. (2016) A review of modelling languages for adventure educational games. In: UNSPECIFIED.

Zaid, H.M. and Adil, M. and Chuan, L.K. and Latiff, N.R.A. (2016) Stability and electrorheology of ZnO nanofluids in the presence of anionic surfactants. In: UNSPECIFIED.

Zabidi, N.A.M. and Tasfy, S. and Shaharun, M.S. (2016) Hydrogenation of CO2 to methanol using copper/zinc oxide-based catalyst: Effect of active metal ratio. In: UNSPECIFIED.

Zaid, H.F.M. and Kait, C.F. and Mutalib, M.I.A. (2016) Integrated photooxidative extractive deep desulfurization using metal doped TiO2 and eutectic based ionic liquid. In: UNSPECIFIED.

Zainuddin, N. and Ibrahim, Z.B. and Jamaludin, N. (2016) On the convergence of two point block backward differentiation formula for second order ODEs. In: UNSPECIFIED.

Zaine, S.N.A. and Mohamed, N.M. (2016) MATLAB simulation of Mie scattering by hollow sphere TiO2 for dye solar cell application. In: UNSPECIFIED.

Zahari, M.H.B. and Guan, B.H. and Chuan, L.K. (2016) Structural and magnetic properties of hexagonal barium ferrite synthesized through the sol-gel combustion route. In: UNSPECIFIED.

Zulkefli, N.A.B.M. and Bin Baharudin, B. (2016) Hotel travel recommendation based on blog information. In: UNSPECIFIED.

Zain, F.M. and Aziz, I.A. and Haron, N. and Ramadhani, A.W. and Mehat, M. (2016) Open source seismic visualization package on OpenNebula cloud management system. In: UNSPECIFIED.

Zardari, M.A. and Jung, L.T. (2016) Data classification with k-NN using novel character frequency-direct word frequency (CF-DWF) similarity formula. In: UNSPECIFIED.

Zulkurnain, E.S. and Ahmad, F. and Gillani, Q.F. (2016) Effects of nano-sized boron nitride (BN) reinforcement in expandable graphite based in-tumescent fire retardant coating. In: UNSPECIFIED.

Zulkifli, S.A. and Saad, N. and Aziz, A.R.A. (2016) Comparative Analysis of Torque and Acceleration of Pre- and Post-Transmission Parallel Hybrid Drivetrains. In: UNSPECIFIED.

Zafar, R. and Malik, A.S. and Kamel, N. and Dass, S.C. (2016) Role of voxel selection and ROI in fMRI data analysis. In: UNSPECIFIED.

Zafar, R. and Malik, A.S. and Kamel, N. and Dass, S.C. (2016) FMRI based brain state analysis of visual activities. In: UNSPECIFIED.

Zafar, R. and Malik, A.S. and Kamel, N. and Dass, S.C. (2016) Importance of realignment parameters in fMRI data analysis. In: UNSPECIFIED.

Zulkepli, S.N.I.S. and Zulkifli, T.Z.A. (2016) Asymmetric T-coil, resistive feedback cascode low noise amplifier for ultrawideband receiver. In: UNSPECIFIED.

Zulkifli, S.A. and Saad, N. and Aziz, A.R.A. (2016) Deterministic and fuzzy logic control of through-the-road split-parallel hybrid electric vehicle. In: UNSPECIFIED.

Zahari, M.K. and Ahmad, B.H. and Wen, W.P. and Shairi, N.A. (2016) Switchable absorptive bandstop to bandpass filter using dual-mode ring resonator. In: UNSPECIFIED.

Zafar, F. and Mandal, P.C. and Shaari, K.Z.B.K. and Moniruzzaman, M. (2016) Total Acid Number Reduction of Naphthenic Acid Using Subcritical Methanol and 1-Butyl-3-Methylimidazolium Octylsulfate. In: UNSPECIFIED.

Zaini, D. and Pasha, M. and Kaura, S. (2016) Inherently Safe Heat Exchanger Network Design by Consequence Based Analysis. In: UNSPECIFIED.

Zakria, M.H. and Omar, A.A. and Bustam, M.A. (2016) Mercury Removal of Fluctuating Ethane Feedstock in a Large Scale Production by Sulphur Impregnated Activated Carbon. In: UNSPECIFIED.

Zawawi, N.A. (2016) Preface. In: UNSPECIFIED.