Effect of Na/Al and Si/Al ratios on adhesion strength of geopolymers as coating material

Irfan Khan, M. and Azizli, K. and Sufian, S. and Man, Z. (2014) Effect of Na/Al and Si/Al ratios on adhesion strength of geopolymers as coating material. Applied Mechanics and Materials, 625. pp. 85-89. ISSN 16609336

Full text not available from this repository.
Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

In this study fly ash based aluminosilicate coatings were formulated and the effect of the Na/Al, Si/Al ratios, and curing time upon adhesion strength of geopolymeric coating was measured using Elcometer 108. Geopolymer gained their maximum adhesion within first three days. After 3 days curing on 60oC resulted into a maximum adhesion strength of 10MPa at Si/Al=3 and Na/Al=1.0. Micro structural analysis and Infra red spectroscopy was used to study the geopolymerisation process. Surface profile of fly ash particles shown that degree of reactivity has a direct relation with their surface roughness. © 2014 Trans Tech Publications, Switzerland.

Item Type: Article
Additional Information: cited By 14; Conference of 3rd International Conference on Process Engineering and Advanced Materials, ICPEAM 2014 ; Conference Date: 3 June 2014 Through 5 June 2014; Conference Code:114811
Uncontrolled Keywords: Adhesion; Bond strength (materials); Coatings; Curing; Fly ash; Geopolymers; Inorganic polymers; Microscopic examination; Silicon; Sodium; Surface roughness, Ash particles; Coating material; Curing time; Elcometer 108; Geopolymer; Geopolymerisation; Si/Al ratio; Surface profiles, Strength of materials
Depositing User: Mr Ahmad Suhairi UTP
Date Deposited: 09 Nov 2023 16:16
Last Modified: 09 Nov 2023 16:16
URI: https://khub.utp.edu.my/scholars/id/eprint/4737

Actions (login required)

View Item
View Item