There is increasing interest in synthesis of silicon dioxide (SiO2) nanoparticles from agricultural biomass waste because the process is cost-efficient and eco-friendly. However, the application of rice straw SiO2 nanoparticles as enhanced oil recovery (EOR) agents have not been examined in detail. Moreover, the pore-scale mechanisms governing the mobilization and displacement of resident oil during rice straw silica nanofluids (RS SNF) flooding is rarely reported in literature. In this study, SiO2 nanoparticles (nanosilica) were synthesized from rice straw and characterized. Oil-water interfacial tension (IFT) and contact angles were measured to assess the performance of RS SNF as EOR agents. Pore-scale visualization experiments were conducted using 2-dimensional micromodel to identify the prevailing EOR mechanisms of RS SNF flooding. Significant reduction in oil-water IFT and contact angles were obtained in presence of RS SNF. These results were comparable to the performance of commercial silica nanofluids, suggesting that RS SNF could be utilized as favourable substitute to commercial SNF. The ideal rice straw nanosilica concentration for achieving optimum residual oil mobilization and microscopic sweep was identified as 0.1 wt from pore-scale visualization experiments. At similar conditions, the oil retained (oil saturation) within the micromodel was determined by Image J software as 28.51 after 0.05 wt RS SNF flooding and 23.73 after 0.1 wt RS SNF flooding. The oil trapped in the micromodel after rice straw nanosilica�SDS and commercial nanosilica�SDS solutions injections were comparable at 19.35 and 18.33 respectively. The displacement efficiency and microscopic sweep was much higher when the synergy of nanoparticles and 0.2 wt sodium dodecyl sulfate (SDS) solutions were injected into the micromodel due to the lowest oil-water IFT and contact angles achieved by SiO2/SDS solutions. The SiO2/SDS fluid front propagated uniformly and in piston-like movement pattern, suggesting that the impact of viscous force over capillary oil retention forces was significantly higher. During nanofluids flooding, uniform invasion of the displacing fluid was observed at the onset of fluid injection, the nanofluid become thicker whereas the oil become thinner with the advancement of the displacing front. However, fingering of the displacing fluid front was noticed with time, resulting in progression of displacement fronts with dendritic and dispersive patterns. © 2022 Elsevier B.V.