Elucidating the specific and combined effects of particle size, impact angle, velocity and stress from an external load on the slurry erosion of mild steel S275JR

by Anirudh Venkatraman Krishnan, C.Y.H. Lim
Published 2021-09-01

Titanium versus magnesium plates for unilateral mandibular angle fracture fixation: biomechanical evaluation using 3-dimensional finite element analysis

by Somasundaram Prasadh, Anirudh Venkatraman Krishnan, C.Y.H. Lim, Manoj Gupta, Raymond Wong
Published 2022-05-01

A new method to lightweight and improve strength to weight ratio of magnesium by creating a controlled defect

by Penchal Reddy Matli, Anirudh Venkatraman Krishnan, Vyasaraj Manakari, Gururaj Parande, B.W. Chua, S.C.K. Wong, C.Y.H. Lim, Manoj Gupta
Published 2020-05-01

Drill Hole Orientation: Its Role and Importance on the Compression Response of Pure Magnesium

by Anirudh Venkatraman Krishnan, Penchal Reddy Matli, Gururaj Parande, Vyasaraj Manakari, Beng Wah Chua, Stephen Chee Khuen Wong, Senthil Kumar Anantharajan, C. Y. H. Lim, Manoj Gupta
Published 2020-10-01

Machining conditions and the wear of TiC-coated carbide tools

by Lim, C.Y.H., Lim, S.-C., Lee, K.-S.
Published 2014

Crater wear mechanisms of TiN coated high speed steel tools

by Lim, C.Y.H., Lim, S.C., Lee, K.S.
Published 2014

Wear of TiC-coated carbide tools in dry turning

by Lim, C.Y.H., Lim, S.C., Lee, K.S.
Published 2014

Machining conditions and the wear of TiC-coated carbide tools

by Lim, C.Y.H., Lim, S.-C., Lee, K.-S.
Published 2014

Wear of Magnesium Composites with Continuous, Interconnected Wire Reinforcement

by Lim, C.Y.H., Lim, S.C., Gupta, M.
Published 2014

Performance of TiN-coated high speed steel tool inserts in turning

by Lim, C.Y.H., Lim, S.C., Lee, K.S.
Published 2014

Wear behaviour of SiCp-reinforced magnesium matrix composites

by Lim, C.Y.H., Lim, S.C., Gupta, M.
Published 2014

Overpoling-induced property degradation in Pb (Mg 1/3Nb 2/3)O 3-PbTiO 3 single crystals of near-morphotropic phase boundary compositions

by Shanthi, M., Hoe, K.H., Lim, C.Y.H., Lim, L.C.
Published 2014