Advanced Materials Research

publication venue for

A New Design of Variable Traction Tracked System. 875-877:2036-2041. 2014
A Review of Solar Air Heater for Drying of Agricultural Products. 903:239-244. 2014
A Taguchi-SQP Approach for Minimizing Energy per Unit Diesel Production at Crude Distillation Unit. 917:220-231. 2014
Adsorptive Removal of Pb(II) Ion from Aqueous Solution Using Rice Husk-Based Activated Carbon. 875-877:196-201. 2014
Analysis of Electric Double Layer on Thin Film Lubrication with Partial Slip. 925:538-542. 2014
Analysis of Two-Layered Film Journal Bearing with Partial Slip Surface. 903:215-220. 2014
Application of Response Surface Methodology to Investigate CO2 Absorption Column Temperature Rise. 917:257-266. 2014
Basalt Carbon Hybrid Composite for Wind Turbine Rotor Blades: A Short Review. 970:67-73. 2014
Benzene and Cyclohexane Separation Using 1-Propanenitrile-3-butylimidazolium Dicyanamide Ionic Liquid. 879:58-62. 2014
Bimetallic Fe-Ni/Zeolite β Catalysts for Hydrogen Generation from Steam Gasification of Palm Kernel Shell. 925:313-317. 2014
Carbon Dioxide Retention on Bentonite Clay Adsorbents Modified by Mono-, Di- and Triethanolamine Compounds. 917:115-122. 2014
Characterization of Modified Multiwalled Carbon Nanotubes. 925:369-373. 2014
Cu-Fe/TiO2 Photocatalyst for Deep Desulfurization Process. 875-877:34-38. 2014
Delineation of Hydrocarbon with Variation of Overburden Thickness for Sea Bed Logging Applications. 875-877:1069-1075. 2014
Density, Viscosity and CO2 Solubility of Novel Solvent. 917:301-306. 2014
Detailed Analysis of Shallow and Heavily-Doped Emitters for Al-BSF Bifacial Solar Cells. 896:459-463. 2014
Effect of Different Qualities of Foam on Fill Particle Transport in Horizontal Well Cleanup Operation Using Coiled Tubing. 903:39-44. 2014
Effect of Magnesium Coating Prior to Lithium Loading over SBA-15 for Stabilization of its Mesostructure. 917:3-9. 2014
Effect of Metakaolin and PVA Fibres on the Workability and Mechanical Properties of Concrete. 935:188-192. 2014
Effect of Metal Doped-TiO2 on the Performance of Dye Solar Cells (DSCs). 925:548-552. 2014
Effect of Microwave Incinerated Rice Husk Ash (MIRHA) on Workability and Compressive Strength of Concrete. 935:193-196. 2014
Effect of Titanium Oxide on Fire Performance of Intumescent Fire Retardant Coating. 935:224-228. 2014
Effects of Eccentric Load on Un-Strengthen and CFRP Strengthened RC Beams. 935:229-232. 2014
Elucidating Corrosion Performance of Weld in CO2 Corrosion Environment. 875-877:547-553. 2014
Embodied Carbon Potential of Conventional Construction Materials Used in Typical Malaysian Single Storey Low Cost House Using Building Information Modeling (BIM). 1043:242-246. 2014
Estimation of Burst Pressure of Corroded Pipeline Using Finite Element Analysis (FEA). 879:191-198. 2014
Evaluation of Aerobic and Anaerobic Co-Digestion of Tetraselmis suecica and Oil Palm Empty Fruit Bunches by Response Surface Methodology. 925:243-247. 2014
Evaluation of Inherent Safety Strategies Using FAHP to Reduce Human Error. 917:332-341. 2014
Experimental Analysis of Petroleum Wax Characteristics for Lubricant Oil Production in Solvent Dewaxing Unit. 875-877:529-533. 2014
Gas Permeation Models in Mixed Matrix Membranes for Gas Separation. 917:317-324. 2014
Hydrogen Adsorption Capacity Investigation of Ni-Co-Al Mixed Oxides. 917:360-364. 2014
Incorporation of Pd Nanoparticles on Rod and Necklace-Like SBA-15 Supports Materials. 917:10-17. 2014
Influence of Workpiece Shape on MRR and EWR in EDM of Steel. 903:51-55. 2014
Integrating Reliability Analysis in Life Cycle Cost Estimation of Heat Exchanger and Pump. 903:408-413. 2014
Investigation of Carbon Nanofiber Supported Iron Catalyst Preparation by Deposition Precipitation. 1043:71-75. 2014
Investigation of Ultrasonic Pretreatment on the Synthesis of Zeolite-T and its CO2 Adsorption Characteristics. 970:35-38. 2014
Iron Doped TiO2 Photocatalysts for Environmental Applications: Fundamentals and Progress. 925:689-693. 2014
Microwave Synthesis of ZnO Nanoparticles for Enhanced Oil Recovery. 1024:83-86. 2014
Mo/γ-Al2O3-MgO as a Bifunctional Catalyst for Renewable Hydrogen Production from Steam Reforming of Glycerol. 875-877:1534-1538. 2014
Modified Polyol-Mediated Synthesis of Doped TiO2 Nanoparticles as the Photoanode in Dye Solar Cells (DSCs). 925:575-579. 2014
Morphology Controlled Ionothermal Synthesis and Characterization of Ceria Nanomaterials. 1024:112-115. 2014
Nano-Yttrium Aluminium Garnet Interfacial Tension and Viscosity for Enhanced Oil Recovery. 1043:3-6. 2014
Operational Training Management System (OPTRAMS) for Safe Operation in Process Plant. 917:325-331. 2014
Optimized TiO2 Nanocrystallites Aggregates for Enhanced Efficiency in Dye Solar Cells. 917:35-44. 2014
Performance of TiO2 Nanoparticles Synthesized at pH 2 as Photoelectrode in Dye Solar Cell. 875-877:77-81. 2014
Phase Evolution and Crystallite Size of Ni0.25Zn0.75Fe2O4 at Different Calcination Temperatures. 925:290-294. 2014
Photocatalytic Degradation of Diisopropanolamine in Heterogeneous Photo-Fenton System. 917:160-167. 2014
Prediction of CO2 Solubility in Aqueous DEA and MDEA Binary Solutions Using O'Connell's Expression. 917:350-359. 2014
Preparation and Characterization of Polysulfone Membrane for Gas Separation. 917:307-316. 2014
Recovery of 1-Butyl-3-Methylimidazolium-Based Ionic Liquids. 879:230-236. 2014
Reinforced Concrete Deep Beams with Openings Strengthened Using FRP – A Review. 1025-1026:938-943. 2014
Reliability Programmed Tool and its Application for Fault Tolerance Computation. 909:397-404. 2014
S-Parameters of Bismuth Iron Garnet (BIG) Filled Polyvinylidene Fluoride Composite Using Rectangular Waveguide Method. 1024:15-18. 2014
Simulation of Hydrodynamics and Reaction Behavior in an Industrial RFCC Riser. 917:267-282. 2014
Smart and Robust Composite Tube Columns Frames for Offshore Sub-Structure Construction. 983:11-15. 2014
Solid Supported [hmim][Tf2N] for CO2 Adsorption. 879:149-154. 2014
Solubility Parameters Based on Refractive Index Data of Ionic Liquid. 917:45-55. 2014
Solubility of Carbon Dioxide in Aqueous Solutions of Piperazine (PZ) at Elevated Pressures. 917:144-150. 2014
Study on Synthesis and Characterization of Cu-Ni Doped TiO2 by Sol-Gel Hydrothermal. 925:248-252. 2014
Study on Synthesis and Characterization of Cu-Ni Doped TiO2 by Sol-Gel Hydrothermal. 925:396-400. 2014
Synthesis and Characterization of Polysulfone/Montmorillonite (PSF/MMT) Mixed Matrix Membrane for Gas Separation. 925:18-22. 2014
Synthesis, Characterization and Activity Pattern of Carbon Nanofibres Based Cu-ZrO2 Catalyst in the Hydrogenation of Carbon Dioxide to Methanol. 925:349-353. 2014
The Application of Aluminum and Hydrochloric Acid to Produce Hydrogen for Internal Combustion Engine via Hydrogen Mixture with Gasoline Based on Specific Fuel Consumption. 875-877:1804-1811. 2014
The Effect of Wollastonite Filler on Thermal Performance of Intumescent Fire Retardant Coating. 970:328-331. 2014
The Effects of Different Depth of Floor towards Internal Daylighting and Rules of Thumb for Office Room. 935:92-96. 2014
The Synergistic Effect of Thiourea and Surfactants on Corrosion Inhibition of Stainless Steel-316 in Hydrochloric Acid. 917:28-34. 2014
Theoretical and Experimental Analysis of Desiccant Wheel Performance for Solar Hybrid Desiccant Air-Conditioning System. 875-877:1888-1894. 2014
Thermal Performance on Unglazed Photovoltaic Thermal Polymer Collector. 911:238-242. 2014
Visible Light Photodegradation of Azo Dye by Cu/TiO2. 917:151-159. 2014
Visible Light Photodegradation of Diisopropanolamine Using Cu/TiO2 Photocatalyst: Effect of Metal Loading. 925:273-277. 2014
Water Absorbency Properties of OPEFB Filled Hydrogels Composites. 980:18-22. 2014
Assessment of Human Factor Performance Using Bayesian Inference and Inherent Safety. 845:658-662. 2013
Carbon Doped Iron Ore Using Palm Kernel Shell. 701:28-31. 2013
Characterization of Activated Carbon from Wood Sawdust Prepared via Chemical Activation Using Potassium Hydroxide. 832:132-137. 2013
Chrome Mask Design for Microfluidic Fabrication. 795:276-280. 2013
Comparative Study of the Hydrodynamic Performance of Shorter and Longer Blades in a Swirling Fluidized Bed. 772:560-565. 2013
Conduction Mechanism and Dielectric Properties of Solid Biopolymer Electrolyte Incorporated with Silver Nitrate. 701:115-119. 2013
Corrosion Behavior of X52 Steel in High Pressure CO2 Environment. 686:234-243. 2013
Corrosion Inhibitor Performance with Presence of FeCO3 Film in CO2 Corrosion Environment under Fluid Flow Effect. 789:507-510. 2013
Development of a Portable Fingerprint Attendance System for University Student. 660:230-235. 2013
Effects of Cutting Parameters on Hole Integrity when Drilling GFRP and HFRP Composites. 845:960-965. 2013
Effects of Ferrocement in Strengthening the Serviceability Properties of Reinforced Concrete Structures. 690-693:686-690. 2013
Efficiency of Visible Light Assisted Fenton Oxidation of Diisopropanolamine (DIPA) of Natural Gas Industry Wastewater. 845:477-481. 2013
Electrical Properties of Starch Based Silver Ion Conducting Solid Biopolymer Electrolyte. 701:120-124. 2013
Experimental Study on Wave Dampening Ability of Floating Breakwaters. 785-786:1253-1257. 2013
Field Emission Model of CNT Based Ionization Gas Sensor. 667:135-143. 2013
Finite Element Analysis of Fatigue in Pipelines due to Slug Flow. 845:271-276. 2013
Flow Behavior in the Resin Infusion of Glass Fiber Reinforced Polymer Wind Turbine Blade. 686:118-124. 2013
Hydrogen Storage Investigation of Fixed Bed of Nanocrystalline Mg-Ni-Cr Mixed Oxides. 701:179-183. 2013
Identification of Nonlinear Systems Using Parallel Laguerre-NN Model. 785-786:1430-1436. 2013
Influence of Processing on the Properties of Carbon Nanotubes/Alumina Hybrid Compound Filled PDMS Composites. 812:198-203. 2013
Investigating the Effects of Injection Moulding Process Parameters on Multiple Tensile Characteristics of Plastic Spur Gear via Experimental Approach. 748:544-548. 2013
Magnetization of Low Grade Iron Ore Using Empty Fruit Bunch Ash. 701:141-144. 2013
Mask Design and Fabrication of Micro/Nanowire Biochip for Reliable and Repeatability Pattern Transfer. 832:79-83. 2013
Mask Design and Simulation: Computer Aided Design for Lab-on-Chip Application. 832:84-88. 2013
Parametric Control of Oxyacetylene Flame Profile. 845:790-794. 2013
Preventive Maintenance Checklist towards Effective Maintenance System: A Case Study in Semiconductor Industry. 748:1208-1211. 2013
Production System Improvement by Integration of FMEA with 5-Whys Analysis. 748:1203-1207. 2013
Role of Debinding to Control Mechanical Properties of Powder Injection Molded 316L Stainless Steel. 699:875-882. 2013
Semi-Quantitative Risk Assessment Matrix for Rotating Equipment. 845:647-651. 2013
Simulation of Drill Pipe Lateral Vibration due to Riser's Oscillation. 845:168-172. 2013
Size Optimization Using Normalized Radial Basis Function and Bat Algorithm. 845:631-636. 2013
Smart Energy Saving Classroom System Using Programmable Logic Controller. 660:158-162. 2013
Surface Integrity and Cutting Temperature in Machining of Biomedical Magnesium Alloys an Overview. 748:7-10. 2013
Thermal Properties of Multiwalled Carbon Nanotubes-Alumina (MWCNT-Al2O3) Hybrid Filled Silicone Rubber Composites. 844:330-333. 2013
Visible-Light Photodegradation of Diisopropanolamine Using Bimetallic Cu-Fe/TiO2 Photocatalyst. 845:421-425. 2013
Void Content Determination of Fiber Reinforced Polymers by Acid Digestion Method. 795:64-68. 2013
A Novel Quantum-Dot Cellular Automata XOR Design. 622-623:545-550. 2012
A Study of Hybrid Optimization of Injection Moulding Process Parameters for Plastic Gear. 591-593:2135-2138. 2012
Char Strength of Wool Fibre Reinforced Epoxy-Based Intumescent Coatings (FRIC). 626:504-508. 2012
Co2 Solubility in Silica Supported [hmim][Tf2N]. 626:509-513. 2012
Dielectric Studies of Proton Conducting Polymer Electrolyte Based on Chitosan/PEO Blend Doped with NH4NO3. 488-489:583-587. 2012
Effect of Ball-Milling Parameter on the Synthesis of MWCNT/Alumina Hybrid Compound. 620:309-313. 2012
Evaluation of the Physiochemical Properties of Molybdenum Supported Catalysts. 488-489:206-210. 2012
Implementation of Autonomous Maintenance in Semiconductor Industry: A Case Study. 591-593:708-711. 2012
Implementation of Decision Tree for Maintenance Policy Decision Making - A Case Study in Semiconductor Industry. 591-593:704-707. 2012
Improvement of Hydrophobicity of Urea Modified Tapioca Starch Film with Lignin for Slow Release Fertilizer. 626:350-354. 2012
Investigation for Optimum Structure of CdS:O/CdTe Solar Cell from Numerical Analysis. 622-623:1194-1198. 2012
Kinetics of Thermal Degradation of Ionic Liquid Regenerated Cellulose. 488-489:923-927. 2012
Mesoporous Tin Phosphate as Anode Material for Lithium-Ion Cells. 545:175-181. 2012
Modeling of Aircraft Composite Parts Using Simulation. 591-593:557-560. 2012
Perspective of Agriculture Wastes Usage as a Resource. 550-553:2246-2254. 2012
Physicochemical Properties of Hydroxyapatite Extracted from Fish Scales. 545:235-239. 2012
Preparation and Characterization of Blended Composite Membranes. 488-489:506-510. 2012
Preparation of Activated Carbon from Durian Shell and Seed. 626:887-891. 2012
Synthesis of Nano-Structured Ni-Co-Al Hydrotalcites and Derived Mixed Oxides. 626:173-177. 2012
Thermophysical Properties of Ionic Liquid with Thiocyanate Anion: Effect of Cations. 626:686-690. 2012
Towards Ultra Thin and High Efficiency ZnxCd1-xS/CdTe Solar Cell by AMPS 1D. 622-623:1183-1187. 2012
Transport Properties of Chitosan/Peo Blend Based Proton Conducting Polymer Electrolyte. 488-489:114-117. 2012
A CMOS MEMS Resonant Magnetic Field Sensor with Differential Electrostatic Actuation and Capacitive Sensing. 403-408:4205-4209. 2011
An Electromagnetic Frequency Increased Vibration Energy Harvester. 403-408:4231-4234. 2011
Comparison of Cobalt Based Catalysts Supported on MWCNT and SBA-15 Supporters for Fischer-Tropsch Synthesis by Using Autoclave Type Reactor. 364:70-75. 2011
Design, Modeling and Simulation of CMOS-MEMS Piezoresistive Cantilever Based Carbon Dioxide Gas Sensor for Capnometry. 403-408:3769-3774. 2011
Rheological Behavior of Carbon Nanotubes / Copper Feedstocks for Metal Injection Molding. 403-408:5335-5340. 2011
Solar Photocatalytic Degradation of 2,4-Dichlorophenol by TiO2 Nanoparticle Prepared by Sol-Gel Method. 233-235:3032-3035. 2011
The Effect of Calcinations Temperature on the Performance of TiO2 Aggregates-Based Dye Solar Cells (DSCs). 364:248-253. 2011
Synthesis, Characterization of Phenethyltrimethoxysilane (PE) Modified Organic-Inorganic Hybrid Silicalite-1 Molecular Sieves and its Transformation into Solid Acid Materials. 47-50:238-241. 2008

UTP CRIS Expert

Advanced Materials Research Journal

Overview

publication venue for

publisher

Identity

International Standard Serial Number (ISSN)