Article

A Alotaibi, M. and Naeem, A. and Wali Khan, I. and Farooq, M. and Ud Din, I. and Saharun, M.S. (2024) Optimization and cost analysis evaluation studies of the biodiesel production from waste cooking oil using Na�Si/Ce-500 heterogeneous catalyst. Biomass and Bioenergy, 182.

A. Rahman, S.H. and Abd Hamid, A.I. and Zulkarnain, N.N. and Md Yusof, M.A. (2024) Enhancing geopolymer cement self-healing property with elastomeric materials. Cogent Engineering, 11 (1).

AL-Quraishi, M.S. and Tan, W.H. and Elamvazuthi, I. and Ooi, C.P. and Saad, N.M. and Al-Hiyali, M.I. and Karim, H.A. and Azhar Ali, S.S. (2024) Cortical signals analysis to recognize intralimb mobility using modified RNN and various EEG quantities. Heliyon, 10 (9).

Abbasi, A.Z. and Rather, R.A. and Hooi Ting, D. and Nisar, S. and Hussain, K. and Khwaja, M.G. and Shamim, A. (2024) Exploring tourism-generated social media communication, brand equity, satisfaction, and loyalty: A PLS-SEM-based multi-sequential approach. Journal of Vacation Marketing, 30 (1). pp. 93-109.

Abbasi, I.A. and Shamim, A. and Shad, M.K. and Ashari, H. and Yusuf, I. (2024) Circular economy-based integrated farming system for indigenous chicken: Fostering food security and sustainability. Journal of Cleaner Production, 436. ISSN 09596526

Abd El Aal, A.K. and Ali, S.H. and Wahid, A. and Bashir, Y. and Shoukat, N. (2024) The influence of crystal size of dolomite on engineering properties: a case study from the Rus Formation, Dammam Dome, Eastern Saudi Arabia. Bulletin of Engineering Geology and the Environment, 83 (2).

Abdalhadi, A. and Bencheva, N. and Saad, N.M. and Al-Quraishi, M.S. and Koundal, N. (2024) Study the Effect of Acute Stress on Decision Making Using Function Near Infrared Spectroscopy (fNIRS). Communications in Computer and Information Science, 1912 C. pp. 452-463.

Abdalhadi, A. and Koundal, N. and Yusoff, M.Z. and Al-Quraishi, M.S. and Merienne, F. and Saad, N.M. (2024) Study of the Acute Stress Effects on Decision Making Using Electroencephalography and Functional Near-Infrared Spectroscopy: A Systematic Review. IEEE Access, 12. pp. 53454-53474. ISSN 21693536

Abdelmaksoud, S.I. and Al-Mola, M.H. and Mustafa Abro, G.E. and Asirvadam, V.S. (2024) In-Depth Review of Advanced Control Strategies and Cutting-Edge Trends in Robot Manipulators: Analyzing the Latest Developments and Techniques. IEEE Access, 12. pp. 47672-47701. ISSN 21693536

Abdul Jamil, I.E. and Al-Kayiem, H.H. and Al-Azawiey, S.S. and Shyaa, A.K. (2024) Critical interpretation and analysis to correlate the canopy height to collector diameter ratio for optimized design of solar chimney power plants. International Journal of Renewable Energy Development, 13 (1). pp. 99-109. ISSN 22524940

Abdul Rahman, S.N.S. and Chai, Y.H. and Lam, M.K. (2024) Taguchi approach for assessing supercritical CO2 (sCO2) fluid extraction of polyhydroxyalkanoate (PHA) from Chlorella Vulgaris sp. microalgae. Journal of Environmental Management, 355.

Abdul-Samad, Z. and Xin, L.L. and Alaloul, W.S. and Salleh, H. (2024) Towards industrial revolution (IR) 4.0 in the construction industry: Readiness of contractors. Results in Engineering, 22.

Abduljabbar, A. and Amadi, A. and Mohyaldinn, M.E. and Ridha, S. and Younis, O. and Alakbari, F.S. (2024) Sand screens application and performance for sand control: A review of selection criteria, screen materials, and causes of failure. Heliyon, 10 (10).

Abdulkadir, I. and Mohammed, B.S. and Al-Yacouby, A.M. and Woen, E.L. and Tafsirojjaman, T. (2024) Tailoring an engineered cementitious composite with enhanced mechanical performance at ambient and elevated temperatures using graphene oxide and crumb rubber. Journal of Materials Research and Technology, 28. pp. 4508-4530.

Abdulkadir, I. and Mohammed, B.S. and Woen, E.L. and Sing, W.L. and Al-Yacouby, A.M. (2024) Optimizing sulfate and acid resistance in rubberized engineered cementitious composite with graphene oxide-pretreated crumb rubber: A response surface methodology approach. Developments in the Built Environment, 18.

Abdullah, A.H. and Ridha, S. and Mohshim, D.F. and Maoinser, M.A. (2024) An experimental investigation into the rheological behavior and filtration loss properties of water-based drilling fluid enhanced with a polyethyleneimine-grafted graphene oxide nanocomposite. RSC Advances, 14 (15). pp. 10431-10444.

Abdullah, G.M.S. and Chohan, I.M. and Ali, M. and Bheel, N. and Ahmad, M. and Najeh, T. and Gamil, Y. and Almujibah, H.R. (2024) Effect of titanium dioxide as nanomaterials on mechanical and durability properties of rubberised concrete by applying RSM modelling and optimizations. Frontiers in Materials, 11.

Abdullah, M.N. and Mustapha, F. and Mustapha, M. and Khan, T. and Sebaey, T.A. (2024) Study on Adhesive and Microstructure Properties of Rice Husk Ash-Based Geopolymer Hybrid Alkyd Coating. Journal of Natural Fibers, 21 (1).

Abdullah, N.D.B. and Isa, M.H. and Juani, R.H.M. and Sultan, A.M.S.B.H.M. and Nayan, Z.B.H. and Mustafa, M.R.U. (2024) Organic Matter Removal from Sanitary Landfill Leachate Through Chemical Oxidation. Lecture Notes in Civil Engineering, 324. pp. 479-487.

Abdullah, N.H. and Borhan, A. and Saadon, S.Z.A.H. (2024) Biosorption of wastewater pollutants by chitosan-based porous carbons: A sustainable approach for advanced wastewater treatment. Bioresource Technology Reports, 25.

Abdullah, N.H. and Zaini, D. and Lal, B. (2024) Prediction of ionic liquids toxicity using machine learning models for application to gas hydrate. Process Safety Progress, 43 (S1). S199-S212. ISSN 10668527

Abdullah, T.A.A. and Zahid, M.S.M. and Turki, A.F. and Ali, W. and Jiman, A.A. and Abdulaal, M.J. and Sobahi, N.M. and Attar, E.T. (2024) Sig-Lime: A Signal-Based Enhancement of Lime Explanation Technique. IEEE Access, 12. pp. 52641-52658. ISSN 21693536

Abdullahi, M. and Alhussian, H. and Aziz, N. and Abdulkadir, S.J. and Alwadain, A. and Muazu, A.A. and Bala, A. (2024) Comparison and Investigation of AI-Based Approaches for Cyberattack Detection in Cyber-Physical Systems. IEEE Access, 12. pp. 31988-32004. ISSN 21693536

Abdulrab, H. and Hussin, F.A. and Ismail, I. and Assad, M. and Awang, A. and Shutari, H. and Arun, D. (2024) Energy efficient optimal deployment of industrial wireless mesh networks using transient trigonometric Harris Hawks optimizer. Heliyon, 10 (7).

Abioye, K.J. and Harun, N.Y. and Sufian, S. and Yusuf, M. and Jagaba, A.H. and Ekeoma, B.C. and Kamyab, H. and Sikiru, S. and Waqas, S. and Ibrahim, H. (2024) A review of biomass ash related problems: Mechanism, solution, and outlook. Journal of the Energy Institute, 112.

Abioye, K.J. and Harun, N.Y. and Sufian, S. and Yusuf, M. and Jagaba, A.H. and Waqas, S. and Ayodele, B.V. and Kamyab, H. and Alam, M. and Gupta, M. and Gill, H.S. and Rezania, S. and Chelliapan, S. and Kang, K. (2024) Optimization of syngas production from co-gasification of palm oil decanter cake and alum sludge: An RSM approach with char characterization. Environmental Research, 246.

Aboelazm, E. and Khe, C.S. and Chong, K.F. and Mohamed Saheed, M.S. and Hegazy, M.B.Z. (2024) Interconnected CoNi-Se Hollow Flakes through Reduced Graphene Oxide Sheets as a Cathode Material for Hybrid Supercapacitors. ACS Applied Materials and Interfaces, 16 (12). pp. 15011-15022.

Aboelazm, E. and Seong Khe, C. and Grätz, S. and Feng Chong, K. and Shuaib Mohamed Saheed, M. and Hegazy, M.B.Z. (2024) Layered construction of integrated sulfur-bridged CoNi-S/rGO architecture for enhanced electrochemical energy storage. Chemical Engineering Journal, 490.

Abu Hassan, D.I. and Che Ani, M.N. and Kamaruddin, S. and Azid, I.A. (2024) Wastes Detection Using a Value Stream Mapping (VSM) Technique in an Electronic-Based Manufacturing Company. SpringerBriefs in Applied Sciences and Technology, Part F. pp. 1-7.

Abu Talip, R.A. and Yahya, W.Z.N. and Mohamed, N.M. and Zaki, Y.H. and Ramly, K. and Zaine, S.N.A. and Bustam, M.A. and Singh, P.K. (2024) A performance enhancement of dye-sensitized solar cells using pyrazolium-based ionic liquids electrolytes vs imidazolium-based ionic liquids electrolytes. Journal of Molecular Liquids, 398.

Abuhussain, M.A. and Waqar, A. and Khan, A.M. and Othman, I. and Alotaibi, B.S. and Althoey, F. and Abuhussain, M. (2024) Integrating Building Information Modeling (BIM) for optimal lifecycle management of complex structures. Structures, 60.

Abulkhair, H. and Nallakukkala, S. and Khan, M.S. and Moujdin, I.A. and Almatrafi, E. and Bamaga, O. and Alsaiari, A. and Albeirutty, M.H. and Lal, B. and Mohd Shariff, A. (2024) Desalination of produced water via carbon dioxide hydrate using filter-based hydrate desalination reactor. Separation and Purification Technology, 332.

Abusalim, S. and Zakaria, N. and Maqsood, A. and Saboor, A. and Yew, K.H. and Mokhtar, N. and Abdulkadir, S.J. (2024) Multi-granularity tooth analysis via YOLO-based object detection models for effective tooth detection and classification. IAES International Journal of Artificial Intelligence, 13 (2). pp. 2081-2092.

Adam, A.A. and Soleimani, H. and Dennis, J.O. and Aldaghri, O. and Alhathlool, R. and Eisa, M.H. and Ibnaouf, K.H. and Abdulkadir, B.A. and Usman, F. and Zango, Z.U. and Nasiru Isa, M. and Abd. Shukur, M.F.B. (2024) A response surface methodology approach to crafting superior performance of potassium salt-based solid biopolymer electrolytes. Measurement: Journal of the International Measurement Confederation, 227.

Adam, A.A. and Soleimani, H. and Shukur, M.F.B.A. and Dennis, J.O. and Hassan, Y.M. and Abdulkadir, B.A. and Yusuf, J.Y. and Ahmed, O.S.S. and Salehan, S.S. and Ayub, S. and Abdullahi, S.S. (2024) Novel composite polymer electrolytes based on methylcellulose-pectin blend complexed with potassium phosphate and ethylene carbonate. Biomass Conversion and Biorefinery, 14 (10). pp. 11665-11682.

Adam, H. and Gopinath, S.C.B. and Krishnan, H. and Adam, T. and Mohammed, M. and Perumal, V. and Fakhri, M.A. and Salim, E.T. and Raman, P. and Subramaniam, S. and Chen, Y. and Sasidharan, S. (2024) Cyclic and differential pulse voltammetric measurements on fibrils formation of alpha synuclein in Parkinson's disease by a gold interdigitated tetraelectrodes. Process Biochemistry, 136. pp. 212-220. ISSN 13595113

Adamu, U.A. and Abu Bakar, N.H.H. and Iqbal, A. and Sambudi, N.S. and Zango, Z.U. (2024) The role of bio-inspired ZnO nanoparticles in the modification of MIL101(Cr) properties for visible light degradation of phenanthrene. Catalysis Communications, 187.

Adebanjo, A.U. and Shafiq, N. and Kumar, V. and Farhan, S.A. and Olatoyan, O.J. and Qureshi, T.I. and Razak, S.N.A. and Adebanjo, I.C. and Guillaumat, L. (2024) Antimicrobial concrete for development: A critical review. Journal of Cleaner Production, 458.

Adigintla, S. and Aware, M.V. and Bingi, K. and Das, S. (2024) Novel Complex Fractional Order Speed Controller for im Drive under Varying Operating Conditions with Enhanced Robustness. IEEE Transactions on Industrial Electronics, 71 (8). pp. 8438-8447. ISSN 02780046

Afolabi, F. and Mahmood, S.M. and Khosravi, V. and Dzulkarnain, I. (2024) Insights into critical rheological and interfacial properties of hydrophobically-modified cellulose sulphate derivatives using molecular modeling. Carbohydrate Polymer Technologies and Applications, 7.

Afolabi, F. and Mahmood, S.M. and Mario, L. and Akhir, A. and Tackie-Otoo, B. and Sharifigaliuk, H. (2024) A multi-mechanistic approach to the oil recovery study of a family of amphiphilic polysaccharides. Petroleum Research.

Afrooz, I.E. and Rostami, A. and Mustaffa, Z. and Gebretsadik, H.T. (2024) Synergistic effects of electric and magnetic nanoparticles with electromagnetic energy in enhanced oil recovery. Alexandria Engineering Journal, 98. pp. 177-186.

Agwu, O.E. and Alatefi, S. and Azim, R.A. and Alkouh, A. (2024) Applications of artificial intelligence algorithms in artificial lift systems: A critical review. Flow Measurement and Instrumentation, 97.

Agwu, O.E. and Alkouh, A. and Alatefi, S. and Azim, R.A. and Ferhadi, R. (2024) Utilization of machine learning for the estimation of production rates in wells operated by electrical submersible pumps. Journal of Petroleum Exploration and Production, 14 (5). pp. 1205-1233. ISSN 21900558

Agwu, O.E. and Alkouh, A. and Alatefi, S. and Azim, R.A. and Ferhadi, R. (2024) Utilization of machine learning for the estimation of production rates in wells operated by electrical submersible pumps. Journal of Petroleum Exploration and Production Technology. ISSN 21900558

Agwu, O.E. and Elraies, K.A. and Alkouh, A. and Alatefi, S. (2024) Mathematical modelling of drilling mud plastic viscosity at downhole conditions using multivariate adaptive regression splines. Geoenergy Science and Engineering, 233.

Ahmad Farid, M.A. and Mohd Johari, S.A. and Lease, J. and Ayoub, M. and Andou, Y. (2024) Catalytic efficiency and stability of biomass-derived sulfonated graphene catalysts in microwave-enhanced biodiesel production. Fuel, 368.

Ahmad Rizal, A.R. and Md Nordin, S. and Abd Rashid, R. and Hassim, N. (2024) Decoding the complexity of sustainable rice farming: a systematic review of critical determining factor of farmers� sustainable practices adoption. Cogent Food and Agriculture, 10 (1). ISSN 23311932

Ahmad Sobri, M.Z. and Khoo, K.S. and Liew, C.S. and Lim, J.W. and Tong, W.-Y. and Zhou, Y. and Zango, Z.U. and Bashir, M.J.K. and Alam, M.M. (2024) Abreast insights of harnessing microalgal lipids for producing biodiesel: A review of improving and advancing the technical aspects of cultivation. Journal of Environmental Management, 360.

Ahmed, S. and Sharif, T. and Ting, D.H. and Sharif, S.J. (2024) Crafting emotional engagement and immersive experiences: Comprehensive scale development for and validation of hospitality marketing storytelling involvement. Psychology and Marketing. ISSN 07426046

Ahmed, S.W. and Altaf, K. and Tariq, A. and Alkahtani, M. and Buhl, J. and Hussain, G. (2024) Geometric Optimization of SLM-Printed AlSi10Mg Radial Heat Sinks: A Numerical and Experimental Approach for Natural Convection Conditions. Arabian Journal for Science and Engineering.

Ahmed, S.W. and Tariq, A. and Altaf, K. and Ali, S. and Hussain, G. and Baharom, M.B. (2024) Thermal Analysis of Helical Pin Fins at Different Pitch Steps Through Numerical Technique. Lecture Notes in Mechanical Engineering. pp. 71-83. ISSN 21954356

Ahmed, T. and Ya, H.H. and Alam, M.A. and Azeem, M. and Khan, M.R. and Sapuan, S.M. and Yusuf, M. and Afridi, J. (2024) Tribological and morphological properties of bentonite nano-clay/CaCO3 reinforced high-density polyethylene nanocomposites. Polymer Composites, 45 (3). pp. 2063-2079.

Ahmed Soomro, A. and Akmar Mokhtar, A. and B Hussin, H. and Lashari, N. and Lekan Oladosu, T. and Muslim Jameel, S. and Inayat, M. (2024) Analysis of machine learning models and data sources to forecast burst pressure of petroleum corroded pipelines: A comprehensive review. Engineering Failure Analysis, 155.

Ajaj, R. and Buniya, M.K. and Wuni, I.Y. and Yousif, O.S. (2024) A case study on the barriers towards achieving sustainable smart city for Abu Dhabi. IET Smart Cities.

Akinsete, O.O. and Owoseni, S.M. and Sulaimon, A.A. (2024) Experimental investigation of wax inhibition tendency of Jatropha oil in Niger Delta waxy crude-oil. Petroleum Science and Technology, 42 (13). pp. 1685-1700. ISSN 10916466

Al Salaheen, M. and Alaloul, W.S. and Musarat, M.A. and Bin Johari, M.A. and Alzubi, K.M. and Alawag, A.M. (2024) Women career in construction industry after industrial revolution 4.0 norm. Journal of Open Innovation: Technology, Market, and Complexity, 10 (2).

Al Shdaifat, M.Y. and Zulkifli, R. and Sopian, K. and Salih, A.A. (2024) Effect of CuO/water nanofluid as a coolant for liquid cold plate on electric vehicle battery cells. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 46 (1). pp. 2270-2283.

Al-Amshawee, S.K.A. and Husain, M.S.B. and Yunus, M.Y.B.M. and Mohamed Azmin, N.F. and Temidayo Lekan, O. (2024) Extruded and overlapped geometries of feed spacers for solution mixing in electrochemical reactors and electrodialysis-related processes. Chemical Engineering Communications, 211 (3). pp. 311-335.

Al-Mekhlafi, A.-B.A. and Isha, A.S.N. and Chileshe, N. and Kineber, A.F. and Ajmal, M. and Baarimah, A.O. and Al-Aidrous, A.-H.M.H. (2024) Risk assessment of driver performance in the oil and gas transportation industry: Analyzing the relationship between driver vigilance, attention, reaction time, and safe driving practices. Heliyon, 10 (6).

Al-Mekhlafi, A.-B.A. and Isha, A.S.N. and Hashim, A.S. (2024) Developing offshore fatigue assessment application to measure fatigue among offshore workers in Malaysia. Process Safety Progress, 43 (S1). S63-S70.

Al-Mekhlafi, A.-B.A. and Isha, A.S.N. and Hashim, A.S. (2024) Investigation the Relationship Between Socio-demographical, Job Characteristics, and Fatigue Among Offshore Workers. Technical and Vocational Education and Training, 39. pp. 545-556. ISSN 18713041

Al-Mugern, R. and Othman, S.H. and Al-Dhaqm, A. (2024) An Improved Machine Learning Method by applying Cloud Forensic Meta-Model to Enhance the Data Collection Process in Cloud Environments. Engineering, Technology and Applied Science Research, 14 (1). pp. 13017-13025.

Al-Rawajfeh, A.E. and Al Bazedi, G. and Shahid, M.K. and Al-Itawi, H. and Lim, J.W. (2024) Recent Patents and Modern Industrial Devices for Clean Water. Advances in Science, Technology and Innovation, Part F. pp. 267-281. ISSN 25228714

Al-Selwi, S.M. and Hassan, M.F. and Abdulkadir, S.J. and Muneer, A. and Sumiea, E.H. and Alqushaibi, A. and Ragab, M.G. (2024) RNN-LSTM: From applications to modeling techniques and beyond�Systematic review. Journal of King Saud University - Computer and Information Sciences, 36 (5).

Al-Waeli, A.H.A. and Sopian, K. and Kazem, H.A. and Chaichan, M.T. (2024) Life Cycle Cost Analysis. Green Energy and Technology, Part F. pp. 123-129. ISSN 18653529

Al-Waeli, A.H.A. and Sopian, K. and Kazem, H.A. and Chaichan, M.T. (2024) PV/T with Nanofluids and Nano-PCM. Green Energy and Technology, Part F. pp. 65-91. ISSN 18653529

Al-Waeli, A.H.A. and Sopian, K. and Kazem, H.A. and Chaichan, M.T. (2024) Performance of PV/T with Nanofluid and Nano-PCM. Green Energy and Technology, Part F. pp. 93-121. ISSN 18653529

Al-Waeli, A.H.A. and Sopian, K. and Kazem, H.A. and Chaichan, M.T. (2024) Photovoltaic Thermal (PV/T). Green Energy and Technology, Part F. pp. 1-17. ISSN 18653529

Al-Waeli, A.H.A. and Sopian, K. and Kazem, H.A. and Chaichan, M.T. (2024) State of the Art of PV/T Technology. Green Energy and Technology, Part F. pp. 45-63. ISSN 18653529

Al-Waeli, A.H.A. and Sopian, K. and Kazem, H.A. and Chaichan, M.T. (2024) Traditional PV/T Collectors. Green Energy and Technology, Part F. pp. 19-44. ISSN 18653529

Al-Yaari, A. and Ching, D.L.C. and Sakidin, H. and Muthuvalu, M.S. and Zafar, M. and Haruna, A. and Merican, Z.M.A. and Yunus, R.B. and Al-dhawi, B.N.S. and Jagaba, A.H. (2024) The effects of nanofluid thermophysical properties on enhanced oil recovery in a heterogenous porous media. Case Studies in Chemical and Environmental Engineering, 9. ISSN 26660164

Al-mahbashi, N.M.Y. and Kutty, S.R.M. and Jagaba, A.H. and Rathnayake, U. and Hagar, H.S. and Al-Dhawi, B.N.S. and Al-Shawesh, G.A.M. (2024) Optimization and characterization of paddy stalks-based activated carbon by physical activation: Box-Behnken design approach. Nano-Structures and Nano-Objects, 38.

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Hussein, I.A. and Muhsan, A.S. and Ridha, S. and Salih, A.A. (2024) A gated recurrent unit model to predict Poisson's ratio using deep learning. Journal of Rock Mechanics and Geotechnical Engineering, 16 (1). pp. 123-135.

Alaloul, W.S. and Al Salaheen, M. and Alzubi, K. and Musarat, M.A. (2024) Utilizing calcined and raw fly oil shale ash in the carbonation process of OPC cement-paste and mortar. Case Studies in Construction Materials, 20.

Alameen, M.B. and Elraies, K.A. and Almansour, A. and Mohyaldinn, M. (2024) Experimental study of the silica dissolution onto sandstone formation: Influence of PH, salinity, and temperature on dissolution. Geoenergy Science and Engineering, 234.

Alashhab, A.A. and Zahid, M.S. and Isyaku, B. and Elnour, A.A. and Nagmeldin, W. and Abdelmaboud, A. and Abdullah, T.A.A. and Maiwada, U.D. (2024) Enhancing DDoS Attack Detection and Mitigation in SDN Using an Ensemble Online Machine Learning Model. IEEE Access, 12. pp. 51630-51649. ISSN 21693536

Alatefi, S. and Agwu, O.E. and Azim, R.A. and Alkouh, A. and Dzulkarnain, I. (2024) Development of multiple explicit data-driven models for accurate prediction of CO2 minimum miscibility pressure. Chemical Engineering Research and Design, 205. pp. 672-694.

Alayande, A.B. and Jee, H. and Kang, D. and Jang, J.K. and Chae, K.-J. and Hwang, M.-H. and Kim, C. and Chae, S. and Kim, I.S. and Chuah, C.Y. and Yang, E. (2024) Membrane and adsorption technologies for efficient hydrogen sulfide removal from biogas: A review focused on the advancement of key components. Process Safety and Environmental Protection, 186. pp. 448-473.

Albaghdadi, A.M. (2024) Performance Prediction of A Power Generation Gas Turbine Using An Optimized Artificial Neural Network Model. AIUB Journal of Science and Engineering, 23 (1). pp. 34-41. ISSN 16083679

Alfellag, M.A. and Kamar, H.M. and Abidin, U. and Kazi, S.N. and Sidik, N.A.C. and Muhsan, A.S. and Alawi, O.A. (2024) Optimizing mixing ratio of multi-walled carbon nanotubes and titanium dioxide: A green approach to high-performance hybrid nanofluids for heat transfer. Powder Technology, 436.

Alfellag, M.A. and Mohamed Kamar, H. and Abidin, U. and Kazi, S.N. and Alawi, O.A. and Muhsan, A.S. and Azwadi Che Sidik, N. and Shaikh, K. and Ahmed Khan, W. (2024) Green synthesized clove-treated carbon nanotubes/titanium dioxide hybrid nanofluids for enhancing flat-plate solar collector performance. Applied Thermal Engineering, 246. ISSN 13594311

Algamili, A.S. and Abidin, Z.Z. and Khir, M.H.B.M. and Ahmed, A.Y. and Hashwan, S.S.B. and Isyaku, U.B. and Al-Dhawi, B.N. and Salem, A.A. (2024) Enhanced Electrothermal Analysis for Acetone Gas Detection Based on PolyMUMPs MEMS Sensor. IEEE Access, 12. pp. 26506-26518. ISSN 21693536

Ali, A. and Aziz, A.R.A. and Ismael, M.A. (2024) Impact of injection pressures on properties, microscopic behavior, and microexplosions in biodiesel-emulsified fuel with biosurfactant. Applied Thermal Engineering, 248.

Ali, A. and Bingi, K. and Ibrahim, R. and Devan, P.A.M. and Devika, K.B. (2024) A review on FPGA implementation of fractional-order systems and PID controllers. AEU - International Journal of Electronics and Communications, 177.

Ali, A. and Houda, M. and Waqar, A. and Khan, M.B. and Deifalla, A. and Benjeddou, O. (2024) A review on application of hydrogen in gas turbines with intercooler adjustments. Results in Engineering, 22. ISSN 25901230

Ali, A. and Noshad, N. and Kumar, A. and Ilyas, S.U. and Phelan, P.E. and Alsaady, M. and Nasir, R. and Yan, Y. (2024) Application of Machine Learning Algorithms in Predicting Rheological Behavior of BN-diamond/Thermal Oil Hybrid Nanofluids. Fluids, 9 (1).

Ali, F. and Negash, B.M. and Ridha, S. and Siddiqui, N.A. and Khan, J.A. and Elryes, A.A. (2024) Molecular Dynamics Perspective of Illite Wettability in Induced Acidic Conditions during Supercritical and Subcritical Carbon Dioxide Sequestration in Deep Saline Aquifers. Energy and Fuels, 38 (5). pp. 4368-4389.

Ali, F. and Negash, B.M. and Ridha, S. and Siddiqui, N.A. and Mim, R.T. and Elryes, A.A. (2024) Wettability alterations of amorphous shales in geological carbon storage: Impact of acidic conditions in deep saline aquifers. Geoenergy Science and Engineering, 234.

Ali, H. and Zhang, Z. and Safdar, R. and Rasool, M.H. and Yao, Y. and Yao, L. and Gao, F. (2024) Fault detection using machine learning based dynamic ICA-distributed CCA: Application to industrial chemical process. Digital Chemical Engineering, 11.

Ali, I. and Ahmad, M. and Lashari, N. (2024) Improving the performance of bentonite-free water-based mud with lignin-based biopolymer. Petroleum Science and Technology.

Ali, I. and Ahmad, M. and Lashari, N. (2024) Optimizing filtration properties of water based drilling mud systems using dually modified starch. Journal of Cleaner Production, 454. ISSN 09596526

Ali, R.F. and Dominic, P.D.D. (2024) Investigation of information security policy violations among oil and gas employees: A security-related stress and avoidance coping perspective. Journal of Information Science, 50 (1). pp. 254-272.

Ali, R.F. and Jahankhani, H. and Hassan, B. (2024) Cybersecurity at the Core: A Study on IT Experts� Policy Adherence. Advanced Sciences and Technologies for Security Applications, Part F. pp. 387-397. ISSN 16135113

Ali, R.F. and Shehzadi, A. and Jahankhani, H. and Hassan, B. (2024) Emerging Trends in Cloud Computing Paradigm: An Extensive Literature Review on Cloud Security, Service Models, and Practical Suggestions. Advanced Sciences and Technologies for Security Applications, Part F. pp. 117-142. ISSN 16135113

Ali, S.E.A. and Lai, F.-W. and Jan, A.A. and Rahman, H. and Shah, S.Q.A. and Hamad, S. (2024) Does intellectual capital curb the long-term effect of information security breaches on firms� market value? Quality and Quantity. ISSN 00335177

Ali, S.S. and Al-Tohamy, R. and Alsharbaty, M.H.M. and Elsamahy, T. and El-Sapagh, S. and Lim, J.W. and Sun, J. (2024) Microplastics and their ecotoxicological impacts: Remediation approaches, challenges and future perspectives-A review. Journal of Cleaner Production, 452.

Ali Khan, M. and Mustaffa, Z. and Sati Hamonangan Harahap, I. and Ben Seghier, M.E.A. (2024) A comprehensive approach for understanding debris flow interaction with pipelines through dynamic impact pressure modeling. Engineering Failure Analysis, 162.

Ali Talpur, S. and Thansirichaisree, P. and Poovarodom, N. and Mohamad, H. and Zhou, M. and Ejaz, A. and Hussain, Q. and Saingam, P. (2024) Machine learning approach to predict the strength of concrete confined with sustainable natural FRP composites. Composites Part C: Open Access, 14.

Aliyu, R. and Mokhtar, A.A. and Hussin, H. (2024) Classification of Pump Failure Using a Decision Tree Technique. Lecture Notes in Mechanical Engineering. pp. 319-336. ISSN 21954356

Aliyu, Y. and Sarlan, A. and Danyaro, K.U. and Rahman, A.S.B.A. (2024) Comparative Analysis of Transformer Models for Sentiment Analysis in Low-Resource Languages. International Journal of Advanced Computer Science and Applications, 15 (4). pp. 353-364.

Aliyu, Y. and Sarlan, A. and Usman Danyaro, K. and Rahman, A.S.B.A. and Abdullahi, M. (2024) Sentiment Analysis in Low-Resource Settings: A Comprehensive Review of Approaches, Languages, and Data Sources. IEEE Access, 12. pp. 66883-66909. ISSN 21693536

Alkouh, A. and Elraies, K. and Agwu, O.E. and Alatefi, S. and Azim, R.A. (2024) Explicit Data-Based Model for Predicting Oil-Based Mud Viscosity at Downhole Conditions. ACS Omega, 9 (6). pp. 6684-6695. ISSN 24701343

Alqushaibi, A. and Hasan, M.H. and Abdulkadir, S.J. and Danyaro, K.U. and Ragab, M.G. and Al-Selwi, S.M. and Sumiea, E.H. and Alhussian, H. (2024) Enhanced Colon Cancer Segmentation and Image Synthesis through Advanced Generative Adversarial Networks based-Sine Cosine Algorithm. IEEE Access. p. 1. ISSN 21693536

Altaf, M. and Alalaoul, W.S. and Musarat, M.A. and Abdelaziz, A.A. and Thaheem, M.J. (2024) Optimisation of energy and life cycle costs via building envelope: a BIM approaches. Environment, Development and Sustainability, 26 (3). pp. 7105-7128.

Altaf, M. and Alaloul, W.S. and Musarat, M.A. and Mostafa, S. and Stewart, R. and Hussain, A. and Rabbani, M.B.A. and Saad, S. and Ammad, S. (2024) Barriers affecting implementation of life cycle cost analysis in construction projects: SEM approach. Innovative Infrastructure Solutions, 9 (2).

Amadi, A. and Mohyaldinn, M. and Ridha, S. (2024) Sand particle induced erosion in oil and gas screens: A review of influencing factors and wear dynamics. Powder Technology, 436.

Amadi, A. and Mohyaldinn, M. and Ridha, S. and Ola, V. (2024) Advancing engineering frontiers with NiTi shape memory alloys: A multifaceted review of properties, fabrication, and application potentials. Journal of Alloys and Compounds, 976.

Amadi, A.H. and Mohyaldinn, M. and Abduljabbar, A. and Ridha, S. and Avilala, P. and Owolabi, G.T. (2024) Wear Analysis of NiTi Sand Screens Using Altair Discrete Element Method. Materials, 17 (2).

Amal, R. and Nadeem, R. and Intisar, A. and Rouf, H. and Hussain, D. and Kousar, R. (2024) An insight into the catalytic properties and process optimization of Fe, Ni doped eggshell derived CaO for a green biodiesel synthesis from waste chicken fat. Catalysis Communications, 187. ISSN 15667367

Amin, M. and Chan, K.W. and Shamim, A. and Ghazali, Z.B. and Lai, F.-W. (2024) Engaging employees in value cocreation: interplay among firm, employee, and supervisor. Service Industries Journal, 44 (7-8). pp. 592-619. ISSN 02642069

Amin, M. and Khan, I. and Shamim, A. and Ting, D.H. and Jan, A. and Abbasi, A.Z. (2024) Employee motivations in shaping customer value co-creation attitude and behavior: Job position as a moderator. Journal of Retailing and Consumer Services, 79.

Aminuddin, M.S. and Bustam, M.A. and Johari, K. (2024) Evaluation of amine-based ionic liquids as potential solvents for hydrogen sulfide absorption using COSMO-RS: Computational and experimental validation. Chemical Engineering Research and Design, 203. pp. 721-730.

Aminuddin, M.S. and Bustam, M.A. and Johari, K. (2024) Latest technological advances and insights into capture and removal of hydrogen sulfide: a critical review. RSC Sustainability, 2 (4). pp. 757-803.

Ammar, S.M. and Ali, N. and Anuar, M.A. and Saad, M.N. and Aljunid, S.A. and Endut, R. and Isa, H. and Alhassan, A.M. and Rusli, N. (2024) Development of a new direct AND (D-AND) detection technique for SAC-OCDMA systems using flexible double weight (FDW) code. Optical and Quantum Electronics, 56 (5).

Anitha, T. and Gopu, G. and Arun Mozhi Devan, P. (2024) Mechanical Ventilator Pressure and Volume Control Using Classifier Machine Learning Algorithm for Medical Care. Journal of Electrical Engineering and Technology, 19 (4). pp. 2715-2738. ISSN 19750102

Anitha, T. and Gopu, G. and Arun Mozhi Devan, P. and Assaad, M. (2024) Machine learning algorithm for ventilator mode selection, pressure and volume control. PLoS ONE, 19 (3 Marc). ISSN 19326203

Anoob, F. and Arachchi, S. and Azamathulla, H.M. and Al-mahbashi, N. and Rathnayake, U. (2024) Nanoadsorbents as an effective wastewater treatment candidate for pharmaceutical contaminants; towards sustainable policy development. Case Studies in Chemical and Environmental Engineering, 9. ISSN 26660164

Anshory, I. and Jamaaluddin, J. and Fahruddin, A. and Fudholi, A. and Radiansah, Y. and Subagio, D.G. and Utomo, Y.S. and Saepudin, A. and Rosyid, O.A. and Sopian, K. (2024) Monitoring solar heat intensity of dual axis solar tracker control system: New approach. Case Studies in Thermal Engineering, 53.

Anshory, I. and Jamaaluddin, J. and Wisaksono, A. and Sulistiyowati, I. and Hindarto and Rintyarna, B.S. and Fudholi, A. and Rahman, Y.A. and Sopian, K. (2024) Optimization DC-DC boost converter of BLDC motor drive by solar panel using PID and firefly algorithm. Results in Engineering, 21.

Arain, A.H. and Negash, B.M. and Yekeen, N. and Farooqi, A.S. and Alshareef, R.S. (2024) Synergising nanoparticles and low salinity waterflooding for enhanced oil recovery: A state-of-the-art review. Journal of Molecular Liquids, 400.

Ardo, F.M. and Khoo, K.S. and Ahmad Sobri, M.Z. and Suparmaniam, U. and Ethiraj, B. and Anwar, A.F. and Lam, S.M. and Sin, J.C. and Shahid, M.K. and Ansar, S. and Ramli, A. and Lim, J.W. (2024) Modelling photoperiod in enhancing hydrogen production from Chlorella vulgaris sp. while bioremediating ammonium and organic pollutants in municipal wastewater. Environmental Pollution, 346.

Arifah Binti Ahmad Che Hamat, N. and Phaik-Ching, A. and Nasir Mohamad Ibrahim, M. and Abu Bakar, N.H.H. and Tan, T.-W. and Farhanah Binti Mohd Amin, N. and Garba, Z.N. and Perumal, V. and Bothi Raja, P. (2024) Cocos Nucifera's lignin mediated silver nanoparticle and their photocatalytic activity. Inorganic Chemistry Communications, 160.

Ariff, M.I.M. and Salim, R.M.Z.R. and Azizan, A. and Ahmad, S. and Arshad, N.I. and Abdullah, M.N. (2024) Exploring public sentiments towards courier services in Malaysia through Twitter: a sentiment analysis approach. Indonesian Journal of Electrical Engineering and Computer Science, 33 (3). pp. 1966-1973.

Ariff, M.I.M. and Zubir, N.E.S. and Azizan, A. and Ahmad, S. and Arshad, N.I. (2024) Malaysian views on COVID-19 vaccination program: a sentiment analysis study using Twitter. Bulletin of Electrical Engineering and Informatics, 13 (1). pp. 436-443.

Ashraf, A. and Liu, G. and Arif, M. and Yousaf, B. and Akhtar, P. and Rashid, A. and Gulzaman, H. and Safeer, R. and Rashid, M.S. and Haider, M.I.S. (2024) The development of plastic waste and sewage sludge co-pyrolyzed biochar composites with improved interfacial characteristics for the effective removal of ciprofloxacin. Process Safety and Environmental Protection, 184. pp. 766-781.

Ashraful Haque, M. and Afzalur Rahman, M. and Salem Al-Bawri, S. and Aljaloud, K. and Singh Sawaran Singh, N. and Saha, D. and Eiyda Hussin, E. and Abdulkawi, W.M. and Zakariya, M.A. (2024) Machine Learning-Based Approach for bandwidth and frequency Prediction for N77 band 5G Antenna. Physica Scripta, 99 (2).

Aslam, M. and Rahim, L.A.B. and Watada, J. and Rubab, S. and Khan, M.A. and AlQahtani, S.A. and Gadekallu, T.R. (2024) Cloud migration framework clustering method for social decision support in modernizing the legacy system. Transactions on Emerging Telecommunications Technologies, 35 (4).

Athar, M. and Shariff, A.M. and Rashid, M.I. and Aadil, M.A. and Umer, A. and Irfan, M. (2024) Sustainable process design for heat exchanger network considering inherent safety and process economics. Canadian Journal of Chemical Engineering. ISSN 00084034

Atta, M.R. and Shaharun, M.S. and Khan, M.M.R. and Al-Mahmodi, A.F. and Almashwali, A.A. and Bangash, I. (2024) ZIF-67 hybridization and boron doping to enhance the photo-electrocatalytic properties of g-C3N4. International Journal of Hydrogen Energy, 53. pp. 925-934.

Ayinla, S.L. and Aziz, A.A. and Drieberg, M. (2024) SALLoc: An Accurate Target Localization in WiFi-Enabled Indoor Environments via SAE-ALSTM. IEEE Access, 12. pp. 19694-19710.

Ayob, M.A. and Jiuh, S.H. and Othman, A.R. and Mohammad, M. (2024) Assessment of Heat Exchanger Tube Bundle Using STELLAR: Industrial Case Study. Lecture Notes in Mechanical Engineering. pp. 221-228. ISSN 21954356

Azam, H. and Pao, W. and Sohail, M. and Khan, U. (2024) Effect of Orientation on Two-phase Slug Flow Induced Vibrations. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 116 (2). pp. 1-12.

Azeem, M. and Ya, H.H. and Alam, M.A. and Muhammad, M. and M Sapuan, S. and Kumar, M. and Gemi, L. and Maziz, A. and Ismail, A.R. and Khan, S.H. (2024) Impact response of filament-wound structure with polymeric liner: Experimental and numerical investigation (Part-A). Results in Engineering, 21.

Azeem, M. and Ya, H.H. and Azad Alam, M. and Kumar, M. and Sajid, Z. and Gohari, S. and Maziz, A. and Gemi, L. and Abdullah, S.I.B.S. and Khan, S.H. (2024) Influence of winding angles on hoop stress in composite pressure vessels: Finite element analysis. Results in Engineering, 21.

Azeerdeen, M.A. and Lemma, T.A. (2024) CFD Simulation of CO2 Through a Converging�Diverging Nozzle. Lecture Notes in Mechanical Engineering. pp. 177-189. ISSN 21954356

Aziz, M.F. and Shamsuri, N.A. and Hamsan, M.H. and Yusof, Y.M. and Azam, M.A. and Aziz, S.B. and Rusdi, H. and Kadir, M.F.Z. and Shukur, M.F. (2024) An elucidation of symmetric supercapacitor with crustacean-based polymer blend electrolyte. Journal of Applied Polymer Science, 141 (2).

Baharudin, N.S. and Ahmad, H. and Hossain, M.S. (2024) Understanding the Degradation of Carbofuran in Agricultural Area: A Review of Fate, Metabolites, and Toxicity. Pertanika Journal of Science and Technology, 32 (1). pp. 285-322.

Bahashwan, A.A. and Ibrahim, R. and Omar, M. and Amosa, T.I. (2024) Supervised learning-based multi-site lean blowout prediction for dry low emission gas turbine. Expert Systems with Applications, 244.

Bakr, Z.H. and Aboelazm, E.A.A. and Khe, C.S. and Ali, G.A.M. and Chong, K.F. (2024) Recycling the Spent Lithium-ion Battery into Nanocubes Cobalt Oxide Supercapacitor Electrode. Current Nanoscience, 20 (6). pp. 820-829.

Bala, A. and Rashid, R.Z.J.A. and Ismail, I. and Oliva, D. and Muhammad, N. and Sait, S.M. and Al-Utaibi, K.A. and Amosa, T.I. and Memon, K.A. (2024) Artificial intelligence and edge computing for machine maintenance-review. Artificial Intelligence Review, 57 (5).

Barham, A. and Zainal Abidin, N.S. (2024) Machine Learning Approach to Predict the Illite Weight Percent of Unconventional Reservoirs from Well-Log Data: An Example from Montney Formation, NE British Columbia, Canada. Applied Sciences (Switzerland), 14 (1).

Basar, M.F. and Zulkarnain, I.A. and Sopian, K. and Mohd Rais, N.A. (2024) Investigations on the performance of bottle blade overshot water wheel in very low head resources for pico hydropower. Energy Harvesting and Systems, 11 (1). ISSN 23298774

Basheer, J. and Uthaman, A. and Lal, H.M. and Thomas, S. and Gopakumar, D.A. and George, J.J. (2024) Nanocellulose: A sustainable functional construct for the remediation of heavy metal ions from water. Journal of Thermoplastic Composite Materials.

Bashir, Y. and Siddiqui, N.A. and Morib, D.L. and Babasafari, A.A. and Ali, S.H. and Imran, Q.S. and Karaman, A. (2024) Cohesive approach for determining porosity and P-impedance in carbonate rocks using seismic attributes and inversion analysis. Journal of Petroleum Exploration and Production, 14 (5). pp. 1173-1187.

Bashir, Y. and Siddiqui, N.A. and Morib, D.L. and Babasafari, A.A. and Ali, S.H. and Imran, Q.S. and Karaman, A. (2024) Cohesive approach for determining porosity and P-impedance in carbonate rocks using seismic attributes and inversion analysis. Journal of Petroleum Exploration and Production Technology.

Beddelee, A.A.A.M. and Mohamad, H. and Tee, B.P. and Abdullah, R.A. (2024) Instrumented Pile Load Test Using Distributed Fibre Optic Sensor: Automation in Data Processing. Lecture Notes in Civil Engineering, 324. pp. 537-547.

Belgiawan, P.F. and Dharmowijoyo, D.B.E. and Novizayanti, D. and Farda, M. and Prasetio, E.A. and Dirgahayani, P. (2024) Does range or fiscal policies matter on EV adoption in Jakarta Metropolitan Area? Transportation Research Interdisciplinary Perspectives, 23.

Bello, U. and Amran, N.A. and Hazwan Ruslan, M.S. and Yáñez, E.H. and Suparmaniam, U. and Adamu, H. and Abba, S.I. and Tafida, U.I. and Mahmoud, A.A. (2024) Enhancing oxidative stability of biodiesel using fruit peel waste extracts blend: Comparison of predictive modelling via RSM and ANN techniques. Results in Engineering, 21.

Bheel, N. and Chohan, I.M. and Alwetaishi, M. and Waheeb, S.A. and Alkhattabi, L. (2024) Sustainability assessment and mechanical characteristics of high strength concrete blended with marble dust powder and wheat straw ash as cementitious materials by using RSM modelling. Sustainable Chemistry and Pharmacy, 39.

Bheel, N. and Chohan, I.M. and Ghoto, A.A. and Abbasi, S.A. and Tag-eldin, E.M. and Almujibah, H.R. and Ahmad, M. and Benjeddou, O. and Gonzalez-Lezcano, R.A. (2024) Synergistic effect of recycling waste coconut shell ash, metakaolin, and calcined clay as supplementary cementitious material on hardened properties and embodied carbon of high strength concrete. Case Studies in Construction Materials, 20.

Bheel, N. and Kumar, S. and Kirgiz, M.S. and Ali, M. and Almujibah, H.R. and Ahmad, M. and Gonzalez-Lezcano, R.A. (2024) Effect of wheat straw ash as cementitious material on the mechanical characteristics and embodied carbon of concrete reinforced with coir fiber. Heliyon, 10 (2).

Bheel, N. and Mohammed, B.S. (2024) Modelling and optimization of long-term modulus of elasticity and Poisson's ratio of graphene oxide based engineered cementitious composites by using response surface methodology. Diamond and Related Materials, 143.

Bheel, N. and Waqar, A. and Radu, D. and Benjeddou, O. and Alwetaishi, M. and Almujibah, H.R. (2024) A comprehensive study on the impact of nano-silica and ground granulated blast furnace slag on high strength concrete characteristics: RSM modeling and optimization. Structures, 62.

Bhutto, S. and Abro, F.-U.-R. and Ali, M. and Buller, A.S. and Bheel, N. and Gamil, Y. and Najeh, T. and Deifalla, A.F. and Ragab, A.E. and Almujibah, H.R. (2024) Effect of banana tree leaves ash as cementitious material on the durability of concrete against sulphate and acid attacks. Heliyon, 10 (7).

Bin Abdullah, A.Z.A. and Muhammad, M.D. and Gilani, S.I.U.-H. and Ali, M. and Al-Kayiem, H.H. (2024) Thermal Analysis of Evacuated Tube Receiver for Solar Power Tower by Transient Simulation. Lecture Notes in Mechanical Engineering. pp. 147-160. ISSN 21954356

Birniwa, A.H. and Ali, U. and Jahun, B.M. and Saleh Al-dhawi, B.N. and Jagaba, A.H. (2024) Cobalt oxide doped polyaniline composites for methyl orange adsorption: Optimization through response surface methodology. Case Studies in Chemical and Environmental Engineering, 9. ISSN 26660164

Birniwa, A.H. and Habibu, S. and Abdullahi, S.S. and Mohammad, R.E.A. and Hussaini, A. and Magaji, H. and Al-dhawi, B.N.S. and Noor, A. and Jagaba, A.H. (2024) Membrane technologies for heavy metals removal from water and wastewater: A mini review. Case Studies in Chemical and Environmental Engineering, 9. ISSN 26660164

Buller, A.S. and Abro, F.-U.-R. and Ali, M. and Ali, T. and Bheel, N. (2024) Effect of silica fume on fracture analysis, durability performance and embodied carbon of fiber-reinforced self-healed concrete. Theoretical and Applied Fracture Mechanics, 130. ISSN 01678442

Butt, U.M. and Letchmunan, S. and Hassan, F.H. and Koh, T.W. (2024) Leveraging transfer learning with deep learning for crime prediction. PLoS ONE, 19 (4 Apri). ISSN 19326203

Chala, G.T. and Al Alshaikh, S.M. and Sulaiman, S.A. (2024) Comparative Study Between Clean, Dusty, and Muddy Photovoltaic Panels in Al Seeb, Oman. Environmental Science and Engineering. pp. 277-287.

Chala, G.T. and Sulaiman, S.A. (2024) Voids size distribution in gelled waxy crude oil under dynamic and static cooling. Petroleum Research, 9 (1). pp. 109-114.

Chala, G.T. and Sulaiman, S.A. and Al Alshaikh, S.M. (2024) Effects of climatic conditions of Al Seeb in Oman on the performance of solar photovoltaic panels. Heliyon, 10 (10).

Chala, G.T. and Sulaiman, S.A. and Al Alshaikh, S.M. (2024) Effects of cooling and interval cleaning on the performance of soiled photovoltaic panels in Muscat, Oman. Results in Engineering, 21.

Chan, Y.H. and Chan, Z.P. and Lock, S.S.M. and Yiin, C.L. and Foong, S.Y. and Wong, M.K. and Ishak, M.A. and Quek, V.C. and Ge, S. and Lam, S.S. (2024) Thermal pyrolysis conversion of methane to hydrogen (H2): A review on process parameters, reaction kinetics and techno-economic analysis. Chinese Chemical Letters, 35 (8).

Chandran, D. and Raviadaran, R. (2024) Corrosion of Copper in Water-In-Biodiesel Diesel Emulsion Fuel. Lecture Notes in Mechanical Engineering. pp. 231-237. ISSN 21954356

Chaudhari, A. and A.A, H.S. and Raut, R. and Sarlan, A. (2024) A Novel Approach of Adpative Window 2 Technique and Kalman Filter- �KalADWIN2� for Detection of Concept Drift. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 14322 . pp. 453-467. ISSN 03029743

Chee, A.L.K. and Chin, B.L.F. and Sulaiman, S.A. and Chai, Y.H. and Saptoro, A. and Umar, H.A. and Lock, S.S.M. and Yiin, C.L. (2024) Syngas-Enriched hydrogen production via catalytic gasification of water hyacinth using renewable palm kernel shell hydrochar. Fuel, 362.

Chen, J.J. and Oh, P.C. and Saleh, S.B.M. (2024) Recent Development on Photocatalysts and Membrane Processes for Photoreduction of CO2 into C1 Solar Fuels. Korean Journal of Chemical Engineering, 41 (3). pp. 609-637.

Cheng, Y.W. and Chong, C.C. and Cheng, C.K. and Wang, C.-H. and Ng, K.H. and Witoon, T. and Lam, M.K. and Lim, J.W. (2024) Long-term evaluation of palm oil mill effluent (POME) steam reforming over lanthanum-based perovskite oxides. Journal of Environmental Management, 351.

Cheong, Y.H. and Lai, L.S. and Shi, L. and Yeap, S.P. and Yeong, Y.F. and Tay, W.H. and Jawad, Z.A. (2024) Advancing CO2 separation: exploring the potential of additive manufacturing in membrane technology. Progress in Additive Manufacturing.

Chin, J.-C. and Ng, F.-L. and Kang, H.-S. and Li, B. and Goh, P.S. and Lim, J.W. and Ghfar, A.A. and Mohammed, A.A.A. and Shahid, M.K. (2024) Effect of hydrodynamic aeration on bioelectricity generation from photoautotrophic Spirulina platensis in biophotovoltaic devices. Algal Research, 77.

Chowdhury, N.E. and Bt Megat Yusoff, P.S.M. and B Mustapha, M. and Bt Che Lah, N.F. (2024) Investigating the influence of the composition of the modified lignin-epoxy coating on hydrophobicity, using Box�Behnken design optimization model. International Journal of Environmental Science and Technology, 21 (10). pp. 7237-7248.

Dalha, I.B. and Koca, K. and Said, M.A. and Rafindadi, A.D. (2024) Biogas intake pressure and port air swirl optimization to enhance the diesel RCCI engine characteristics for low environmental emissions. Process Safety and Environmental Protection, 184. pp. 703-719.

Dalha, I.B. and Koca, K. and Said, M.A. and Rafindadi, A.D. (2024) Predicting the effects of direct-injected fuels co-powered by high-CO2 biogas on RCCI engine emissions using kinetic mechanisms and multi-objective optimization. Process Safety and Environmental Protection, 184. pp. 747-765.

Darkwah-Owusu, V. and Md Yusof, M.A. and Sokama-Neuyam, Y.A. and Turkson, J.N. and Fjelde, I. (2024) Assessment of Advanced Remediation Techniques for Enhanced CO2 Injectivity: Laboratory Investigations and Implications for Improved CO2 Flow in Saline Aquifers. Energy and Fuels, 38 (10). pp. 8895-8908.

Deswandri, D. and Sudarno, S. and Tyas, R.L. and Kumaraningrum, A.R. and Maerani, R. and Hidayatullah, I.M. and Sahlan, M. and Shariff, A.M. and Hermansyah, H. (2024) Risk identification of integral pressurized water reactor (IPWR) cooling system using a combination HAZOP, FMEA, and FTA methods. Process Safety Progress, 43 (S1). S78-S89.

Dharma, F. and Marimutu, M. and Alvia, L. (2024) Profitability and Market Value Effect on Carbon Emission Disclosures: The Moderating Role of Environmental Performance. International Journal of Energy Economics and Policy, 14 (3). pp. 463-472. ISSN 21464553

Diyan Mohd Ridzuan, N. and Victor Ayodele, B. and Najwa Abdul Talib, N. and Shima Shaharun, M. and Mohd Shariff, A. and Naim Ahmad, K. (2024) Synthesis and characterization of hydrophobic nickel catalyst supported on different oxides for continuous liquid phase catalytic exchange reaction. Journal of Industrial and Engineering Chemistry.

Diyana, Z.N. and Jumaidin, R. and Selamat, M.Z. and Suan, M.S.M. and Hazrati, K.Z. and Yusof, F.A.M. and Ilyas, R.A. and Eldin, S.M. (2024) Effect of Pandanus Amaryllifolius Fibre on Physio-Mechanical, Thermal and Biodegradability of Thermoplastic Cassava Starch/Beeswax Composites. Journal of Polymers and the Environment, 32 (3). pp. 1406-1422.

Diyana Suzaimi, N. and Sean Goh, P. and Chun Wong, K. and Taniguchi, T. and Wei Lim, J. and Ahmad Nizam Nik Malek, N. and Fauzi Ismail, A. (2024) Construction of 1D akaganeite-templated nanochannels in polyamide forward osmosis membrane for high flux separation and nutrient enrichment. Separation and Purification Technology, 330.

El Aal, A.K.A. and Ali, S.H. and Wahid, A. and Bashir, Y. and Shoukat, N. (2024) Correction to: The influence of crystal size of dolomite on engineering properties: a case study from the Rus Formation, Dammam Dome, Eastern Saudi Arabia (Bulletin of Engineering Geology and the Environment, (2024), 83, 2, (59), 10.1007/s10064-024-03549-5). Bulletin of Engineering Geology and the Environment, 83 (3).

El-Ghali, M.A.K. and Shelukhina, O. and Abbasi, I.A. and Moustafa, M.S.H. and Hersi, O.S. and Siddiqui, N.A. and Al-Ramadan, K. and Alqubalee, A. and Bello, A.M. and Amao, A.O. (2024) Depositional and sequence stratigraphic controls on diagenesis in the Upper Cambrian-Lower Ordovician Barik Formation, central Oman: Implications for prediction of reservoir porosity in a hybrid-energy delta system. Marine and Petroleum Geology, 160.

Elgharbawy, A.A.M. and Warsi Khan, H. and Mohd Noor, N. and Shahira Syed Putra, S. and Normi Engku Ismail, E. and Farzana Hizaddin, H. and Hayyan, M. and Hayyan, A. and Jefrey Basirun, W. and Moniruzzaman, M. and Al-afandi, L. and Shirwan Abdullah Sani, M. (2024) Antibacterial performance enhancement using hydrophobic deep eutectic solvents: COSMO-RS prediction, experimental validation, and synergistic action with antibiotics. Journal of Molecular Liquids, 396.

Fairuz, W.N.M. and Nawi, I.M. and Ahmad, M.R. and Kannan, R. (2024) Design analysis and simulation of serpentine-shaped piezoelectric cantilever beam for pipeline vibration-based energy harvester. AIMS Energy, 12 (3). pp. 561-599. ISSN 23338326

Faizan Ali, R. and Dominic, P.D.D. and Hina, S. and Naseer, S. (2024) Fostering information security policies compliance with ISA-95-based framework: an empirical study of oil and gas employees. International Journal of Information Security, 23 (2). pp. 1197-1213.

Farid, M.A.A. and Mohd Johari, S.A. and Lease, J. and Ayoub, M. and Andou, Y. (2024) Kinetics and thermodynamics in microwave-assisted transesterification of palm oil utilizing sulphonated bio-graphene catalysts for biodiesel production. Biomass and Bioenergy, 185.

Farooq, M. and Zaid, F. and Ramli, A. and Perveen, F. and Naeem, A. and Khan, I.W. and Ghazi, Z.A. and Ur Rehman, A. (2024) Development of Porous WO3/SAPO-34 Solid Catalyst for the Conversion of Glycerol to Fuel Performance Improving Bio-additive (Solketal). Arabian Journal for Science and Engineering. ISSN 2193567X

Farooqi, A.S. and Abdullah, B. and Ayodele, B.V. and Ishtiaq, U. and Marias, F. and Nemitallah, M.A. and Ali, B. (2024) Catalytic bi-reforming of methane as a potential source of hydrogen rich syngas: Promotional effect of strontium on the catalytic performance of Ni/MgO-ZrO2. Energy Conversion and Management: X, 22.

Foong, S.Y. and Chan, Y.H. and Yek, P.N.Y. and Lock, S.S.M. and Chin, B.L.F. and Yiin, C.L. and Lan, J.C.-W. and Lam, S.S. (2024) Microwave-assisted pyrolysis in biomass and waste valorisation: Insights into the life-cycle assessment (LCA) and techno-economic analysis (TEA). Chemical Engineering Journal, 491.

Gan, E.Y.T. and Chan, Y.J. and Wan, Y.K. and Tiong, T.J. and Chong, W.C. and Lim, J.W. (2024) Examining the synergistic effects through machine learning prediction and optimisation in the anaerobic Co-digestion (ACoD) of palm oil mill effluent (POME) and decanter cake (DC) with economic analysis. Journal of Cleaner Production, 437.

Gan, J.-E. and Lim, J.P.S. and Poon, W.C. and Thuraiselvam, S. (2024) Rights awareness and COVID-19 tourism job losses: perspectives from Malaysia. Current Issues in Tourism, 27 (2). pp. 171-177. ISSN 13683500

Gan, J.-E. and Lim, J.P.S. and Trupp, A. and Poon, W.C. (2024) State intervention and tourism business resilience: Exploring firm-level crisis responses. Annals of Tourism Research Empirical Insights, 5 (2). ISSN 26669579

Gayatri, R. and Fizal, A.N.S. and Yuliwati, E. and Zailani, M.Z. and Jaafar, J. and Hossain, M.S. and Zulkifli, M. and Taweepreda, W. and Ahmad Yahaya, A.N. (2024) Effect of polyvinylidene fluoride concentration in PVDF-TiO2-PVP composite membranes properties and its performance in bovine serum albumin rejection. Case Studies in Chemical and Environmental Engineering, 9.

Ghani, M.U. and Sun, B. and Houda, M. and Zeng, S. and khan, M.B. and ElDin, H.M.S. and Waqar, A. and Benjeddou, O. (2024) Mechanical and environmental evaluation of PET plastic-graphene nano platelets concrete mixes for sustainable construction. Results in Engineering, 21.

Ghanim, A.A.J. and Waqas, S. and Zeeshan, M.H. and Khan, J.A. and Ghalib, S.A. and Irfan, M. and Rahman, S. and Faraj Mursal, S.N. and Jalalah, M. and Almawgani, A.H.M. (2024) Nanofiltration PVP Membrane with Gradient Cross-Linking for Efficient Polycyclic Aromatic Hydrocarbons Removal. ACS Omega, 9 (5). pp. 5265-5272.

Ghumman, A.S.M. and Shamsuddin, R. and Abbasi, A. and Ahmad, M. and Yoshida, Y. and Sami, A. and Almohamadi, H. (2024) The predictive machine learning model of a hydrated inverse vulcanized copolymer for effective mercury sequestration from wastewater. Science of the Total Environment, 908.

Ghumman, A.S.M. and Shamsuddin, R. and Alothman, Z.A. and Waheed, A. and Aljuwayid, A.M. and Sabir, R. and Abbasi, A. and Sami, A. (2024) Amine-Decorated Methacrylic Acid-based Inverse Vulcanized Polysulfide for Effective Mercury Removal from Wastewater. ACS Omega, 9 (4). pp. 4831-4840.

Ghumman, A.S.M. and Shamsuddin, R. and Qomariyah, L. and Lim, J.W. and Sami, A. and Ayoub, M. (2024) Heavy metal sequestration from wastewater by metal-organic frameworks: a state-of-the-art review of recent progress. Environmental Science and Pollution Research.

Goh, S.Q. and Adnan, R. and Jumbri, K. and Ishak, M.A.I. and Abdullah, N.A.F. and Rahim, N.Y. (2024) Molecular Insight into the Ternary Complex Formation between Ethambutol, Isoniazid and β-Cyclodextrin. ChemistrySelect, 9 (2).

Gul, I.A. and Abdul Rani, A.M. and Al-Amin, M. and Danish, M. and Rubaiee, S. and Ahmed, A. and Zhang, C. (2024) Investigating surface integrity, corrosion resistance and biocompatibility of 316L steel using carbon nanotube-assisted EDM process. Results in Engineering, 21.

Guo, Y. and Meng, L. and Ayodele, B.V. (2024) Editorial: Solution thermodynamics and dynamics in lithium-bearing brine systems. Frontiers in Chemistry, 12.

Hadi, M.U. and Danyaro, K.U. and Alqushaibi, A. and Qureshi, R. and Alam, T. (2024) Digital Predistortion Based Experimental Evaluation of Optimized Recurrent Neural Network for 5G Analog Radio Over Fiber Links. IEEE Access, 12. pp. 19765-19777.

Hagar, H.S. and Jufar, S.R. and Foroozesh, J. and Lee, J.H. and Al-mahbashi, N. and Alakbari, F.S. and Jagaba, A.H. and Kwon, S. (2024) A sustainable chitin nanocrystal-stabilised emulsions to enhance the conformance control in porous media. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 688.

Hakemzadeh, M.H. and Sopian, K. and Kazem, H.A. and Al-Waeli, A.H.A. and Chaichan, M.T. (2024) Evaluating the techno-economic viability of different solar collectors integrated into an adsorption cooling system in tropical climate conditions. Solar Energy, 268. ISSN 0038092X

Hamdoon, A. and Mohammed, M. and Elraies, K. (2024) A Review of Chan Plot Application and Recent Advanced Models for Diagnosing Excessive Water Production Pregled primjene Chanova dijagrama i nedavno razvijenih naprednih modela za utvr�ivanje prekomjerne proizvodnje slojne vode. Rudarsko Geolosko Naftni Zbornik, 39 (2). pp. 149-163. ISSN 03534529

Hamid, H.H. and Mohd Zabidi, N.A. and Shaharun, M.S. (2024) Effects of Promoters on the Physicochemical Properties of Cobalt-Iron Catalysts Supported on Multiwalled-Carbon Nanotubes. Catalysis Letters, 154 (1). pp. 245-258.

Hamsan, M.H. and Azli, A.A. and Aziz, S.B. and Shamsuri, N.A. and Kadir, M.F.Z. and Nazri, N.S. and Keng, L.K. and Zaid, H.F.M. and Shukur, M.F. (2024) Characterization of methylcellulose based composite polymer electrolytes reinforced with Reduced-Graphene oxide. Materials Science and Engineering: B, 303.

Hamsan, M.H. and Halim, N.A. and Sa�aya, N.S.N. and Nazri, N.S. and Salleh, N.F.A. and Demon, S.Z.N. and Shamsuri, N.A. and Kadir, M.F.Z. and Shukur, M.F. and Keng, L.K. and Jafry, N.H.A. and Rahim, A.A. (2024) DEVELOPMENT OF GREEN ENERGY STORAGE FROM BACTERIAL CELLULOSE, METHYL CELLULOSE AND POTATO STARCH PEMBANGUNAN PENYIMPANAN TENAGA HIJAU DARIPADA SELULOSA BAKTERIA, SELULOSA METIL DAN KANJI KENTANG. Jurnal Teknologi, 86 (2). pp. 69-76. ISSN 01279696

Hanafi, Q.N.�M. and Sulaiman, S. and Mahamad, S. (2024) A Web Application to Recommend Songs Based on Human Facial Expressions and Emotions. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 14322 . pp. 76-86. ISSN 03029743

Hananto, A.L. and Tirta, A. and Herawan, S.G. and Idris, M. and Soudagar, M.E.M. and Djamari, D.W. and Veza, I. (2024) Digital Twin and 3D Digital Twin: Concepts, Applications, and Challenges in Industry 4.0 for Digital Twin. Computers, 13 (4). ISSN 2073431X

Haq, M. and Khan, A. and Naqvi, T. and Yusuf, M. and Kamyab, H. and Chelliapan, S. (2024) Parametric analysis of RSB sensors for concrete strength monitoring using hybrid EMI and WP techniques: Numerical investigation. Ain Shams Engineering Journal, 15 (3).

Harahap, M.I.P. and Othman, I. and Dinata, N.A.M. (2024) Investigation on the Nature of Safety Rule Violations in High-Rise Construction Projects. Journal of Advanced Research in Applied Sciences and Engineering Technology, 41 (2). pp. 164-179.

Haron, G.A.S. and Mahmood, H. and Noh, H.B. and Moniruzzaman, M. (2024) Fabrication and characterization of 3D printable nanocomposite filament based on cellulose nanocrystals and polylactic acid using ionic liquids. Journal of Applied Polymer Science, 141 (2). ISSN 00218995

Hasan, A. and Xiang, Z. and Mao, D. and Kashif, M. and Mirza, F. and Shabbir, R. (2024) Unraveling the impact of eco-centric leadership and pro-environment behaviors in healthcare organizations: Role of green consciousness. Journal of Cleaner Production, 434. ISSN 09596526

Hasan, H.A. and Sopian, K. and Togun, H. and Mahdi, J.M. and Mohammed, H.I. and Yaseen, Z.M. (2024) Experimental evaluation of thermal efficiency, electrical efficiency, and power production of low-concentrating photovoltaic-thermal system with micro-jet channel. Applied Thermal Engineering, 236. ISSN 13594311

Hasan, M.L. and M. Tóth, T. (2024) Multiple linear regression and gene expression programming to predict fracture density from conventional well logs of basement metamorphic rocks. Journal of Petroleum Exploration and Production. ISSN 21900558

Hashim, M.Z. and Othman, I. and Khalid, N.S.M. and Hassan, S.H. and Musa, M.K. (2024) Construction Players� Awareness on the Use of Building Information Modelling (BIM) and Industrialized Building System (IBS) in Malaysian Construction Industry. Lecture Notes in Civil Engineering, 324. pp. 491-504.

Hasnain, S.M.W.U. and Farooqi, A.S. and Ayodele, B.V. and Farooqi, A.S. and Sanaullah, K. and Abdullah, B. (2024) Advancements in Ni and Co-based catalysts for sustainable syngas production via Bi-reforming of methane: A review of recent advances. Journal of Cleaner Production, 434.

Hassan, A. and Altaf, K. and Awang, M. and Pedapati, S.R. and Ahmed, N. and Marode, R.V. (2024) Multi-objective optimization of friction stir additively manufactured Al-7075 multi-layered laminates. Journal of Alloys and Compounds, 993.

Hassan, A. and Jumbri, K. and Numin, M.S. and Kee, K.E. (2024) Theoretical Investigation of New Possible Fatty Hydrazides Corrosion Inhibitors Via Density Functional Theory. Journal of Advanced Research in Micro and Nano Engineering, 15 (1). pp. 14-21.

Hassan, A. and Pedapati, S.R. (2024) Exploration of Possible Defects Originating in Al-5083 Laminates Synthesized Through Friction Stir Additive Manufacturing Technique. Lecture Notes in Mechanical Engineering. pp. 309-318. ISSN 21954356

Hassan, N.A.A. and Mohamad Haafiz, M.K. and Weerasooriya, P.R.D. and Abdul Khalil, H.P.S. and Kaus, N.H.M. and Hossain, M.S. and Jawaid, M. and Chen, R.S. (2024) Regenerated cellulose fabricated from oil palm biomass integrated with bismuth ferrite for methyl orange degradation. Polymer International, 73 (2). pp. 149-162.

Hidayati, N. and Sunarjono, S. and Magfirona, A. and Hardini, P. and Mulyono, G.S. and Muhammad, T. and Erwanda, A. and Ghalib, H.D.A. and Risqy, M.M.R. and Dharmowijoyo, D.B.E. (2024) Evaluation of Public Transportation Implementation as Part of Supporting Sustainable Transportation. Civil Engineering and Architecture, 12 (3A). pp. 2360-2369.

Ho, C.-D. and Wang, Y.-W. and Chao, Y. and Chew, T.L. and Jiang, M.-S. and Chen, J.-H. and Li, C.-Y. (2024) Enhancing the Permeate Flux Improvement of Direct Contact Membrane Distillation Modules with Inserted S-Ribs Carbon-Fiber Filaments. Membranes, 14 (5).

Ho, C.S.H. and Tan, T.W.K. and Khoe, H.C.H. and Chan, Y.L. and Tay, G.W.N. and Tang, T.B. (2024) Using an Interpretable Amino Acid-Based Machine Learning Method to Enhance the Diagnosis of Major Depressive Disorder. Journal of Clinical Medicine, 13 (5).

Hossain Lipu, M.S. and Abd Rahman, M.S. and Mansor, M. and Ansari, S. and Meraj, S.T. and Hannan, M.A. (2024) Hybrid and combined states estimation approaches for lithium-ion battery management system: Advancement, challenges and future directions. Journal of Energy Storage, 92.

Hui, T.X. and Kasim, S. and Aziz, I.A. and Fudzee, M.F.M. and Haron, N.S. and Sutikno, T. and Hassan, R. and Mahdin, H. and Sen, S.C. (2024) Robustness evaluations of pathway activity inference methods on gene expression data. BMC Bioinformatics, 25 (1).

Humayun, M.A. and Shuja, J. and Abas, P.E. (2024) A review of social background profiling of speakers from speech accents. PeerJ Computer Science, 10. ISSN 23765992

Hussain, K. and Fayyaz, M.S. and Shamim, A. and Abbasi, A.Z. and Malik, S.J. and Abid, M.F. (2024) Attitude, repurchase intention and brand loyalty toward halal cosmetics. Journal of Islamic Marketing, 15 (2). pp. 293-313. ISSN 17590833

Hussain, S. and Siddique, A. and Hassan, M. and Rasool, K. and Shahzad, A. and Asad Naqvi, S.A. and Ul Mustafa, M.R. (2024) Characteristics and health implications of fine particulate matter near urban road site in Islamabad, Pakistan. Environmental Research, 252.

Ibrahim, I.A. and Rawindran, H. and Alam, M.M. and Leong, W.H. and Sahrin, N.T. and Ng, H.-S. and Chan, Y.J. and Abdelfattah, E.A. and Lim, J.W. and Aliyu, U.S. and Khoo, K.S. (2024) Mitigating persistent organic pollutants from marine plastics through enhanced recycling: A review. Environmental Research, 240.

Ibrahim, M.A. and Jaafar, M.Z. and Yusof, M.A.M. and Shye, C.A. and Suardi, H. and Hussin, M.F.M. and Razali, A.Z. and Idris, A.K. (2024) The influence of nanoparticle size, concentration, and functionalization on drilling fluid filtration properties. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 693.

Ibrahim, M.K. and Yusof, U.K. and Eisa, T.A.E. and Nasser, M. (2024) Bioinspired Algorithms for Multiple Sequence Alignment: A Systematic Review and Roadmap. Applied Sciences (Switzerland), 14 (6).

Idris, A.M. and Rusli, R. and Mohamed, M.E. and Ramli, A.F. and Nasif, M.S. and Lim, J.S. (2024) Explosion pressure and duration prediction using machine learning: A comparative study using classical models with Adam-optimized neural network. Canadian Journal of Chemical Engineering.

Idris, N.N. and Chua, L.H.C. and Mustaffa, Z. and Das, S. and Takaijudin, H. (2024) A review study on the association between hydraulic performance and treatment effectiveness in free surface flow constructed wetlands. Ecological Engineering, 203.

Imanto, T. and Wikantyasning, E.R. and Nurwaini, S. and Amalia, M. and Sambudi, N.S. and Harun, N.Y. (2024) PREPARATION AND SOLID-STATE CHARACTERIZATION OF KETOPROFEN-SUCCINIC ACID-SACCHARIN CO-CRYSTAL WITH IMPROVED SOLUBILITY. International Journal of Applied Pharmaceutics, 16 (1). pp. 275-279.

Iqbal, M. and Karuppanan, S. and Perumal, V. and Ovinis, M. and Iqbal, M. and Rasul, A. (2024) Optimization of fibre orientation for composite reinforcement of circular hollow section KT-joints. International Journal of Structural Integrity.

Iqbal, M. and Karuppanan, S. and Perumal, V. and Ovinis, M. and Khan, A. and Faizan, M. (2024) Stress Concentration Factors in KT-Joints Subjected to Complex Bending Loads Using Artificial Neural Networks. Civil Engineering Journal (Iran), 10 (4). pp. 1051-1068.

Irfan, M. and Alaloul, W.S. and Ghufran, M. and Yaseen, G. and Thaheem, M.J. and Qureshi, A.H. and Bilal, M. (2024) Analyzing the impact of organizational culture on social sustainability: a perspective of the construction industry. Environment, Development and Sustainability, 26 (1). pp. 1103-1133. ISSN 1387585X

Isah, A.S. and Takaijudin, H.B. and Mahinder Singh, B.S. and Yusof, K.W. and Abimbola, T.O. and Jagaba, A.H. (2024) Evaluation of distillate quality produced by using a hybrid solar desalination system. Ain Shams Engineering Journal, 15 (7).

Isah, A.S. and Takaijudin, H.B. and Singh, B.S.M. and Abimbola, T.O. and Muhammad, M.M. and Sani, S.B. (2024) Photovoltaic-integrated advancements for sustainable water production: Developing and evaluating an enhanced hybrid solar desalination system. Desalination, 579.

Ishak, M.A.I. and Aun, T.T. and Sidek, N. and Mohamad, S. and Jumbri, K. and Abdul Manan, N.S. (2024) An enantioselective study of β-cyclodextrin and ionic liquid-β-cyclodextrin towards propranolol enantiomers by molecular dynamic simulations. Journal of Computational Chemistry, 45 (16). pp. 1329-1351.

Ishaq, A.I. and Panitanarak, U. and Abiodun, A.A. and Suleiman, A.A. and Daud, H. (2024) The Generalized Odd Maxwell-Kumaraswamy Distribution: Its Properties and Applications. Contemporary Mathematics (Singapore), 5 (1). pp. 711-742. ISSN 27051064

Islam, M.T. and Alam, M.A. and Lipu, M.S.H. and Rahman, M.S. and Rahman, M.F. and Ashique, R.H. and Radoan, M. and Masaoud, A. (2024) Harmonics Minimization of Symmetric Five-Level Inverter Using Improved LSF Modulation Scheme. IEEE Access, 12. pp. 62526-62542. ISSN 21693536

Islam, R. and Habib Nabila, F. and Wakabayashi, R. and Kamiya, N. and Moniruzzaman, M. and Goto, M. (2024) Ionic Liquid-Based patch formulation for enhanced transdermal delivery of sparingly soluble drug. Journal of Molecular Liquids, 397.

Isma'ila, U.A. and Danyaro, K.U. and Muazu, A.A. and Maiwada, U.D. (2024) Review on Approaches of Federated Modeling in Anomaly-Based Intrusion Detection for IoT Devices. IEEE Access, 12. pp. 30941-30961. ISSN 21693536

Ismael, M.A. and Rosli, M.A.F. and Aziz, A.R.A. and Mohammed, S.E. and Opatola, R.A. and El-Adawy, M. (2024) Gas to liquid (GTL) role in diesel engine: Fuel characteristics and emission: A review. Cleaner Engineering and Technology, 18.

Ismail, M.C. and Akhtar, S. and Sulieman, F. (2024) Development of Corrosion Management Framework with Equipment Susceptible to Creep. Lecture Notes in Mechanical Engineering. pp. 275-283. ISSN 21954356

Ja'e, I.A. and Raja Sazrin, R.A.N.B. and Syamsir, A. and Bheel, N. and Amaechi, C.V. and Min, T.H. and Anggraini, V. (2024) Optimisation of mechanical properties and impact resistance of basalt fibre reinforced concrete containing silica fume: Experimental and response surface assessment. Developments in the Built Environment, 17.

Jagaba, A.H. and Kutty, S.R.M. and Noor, A. and Affam, A.C. and Ghfar, A.A. and Usman, A.K. and Lawal, I.M. and Birniwa, A.H. and Kankia, M.U. and Afolabi, H.K. and Soja, U.B. (2024) Parametric optimization and kinetic modelling for organic matter removal from agro-waste derived paper packaging biorefinery wastewater. Biomass Conversion and Biorefinery, 14 (2). pp. 2235-2252.

Jalil, N.A.S.A. and Aboelazm, E. and Khe, C.S. and Ali, G.A.M. and Chong, K.F. and Lai, C.W. and You, K.Y. (2024) Enhancing capacitive performance of magnetite-reduced graphene oxide nanocomposites through magnetic field-assisted ion migration. PLoS ONE, 19 (2 Febr).

Jamal, M. and Sharif, F. and Shozab Mehdi, M. and Fakhar-e-Alam, M. and Asif, M. and Mustafa, W. and Bashir, M. and Rafiq, S. and Bustam, M.A. and Saif-ur-Rehman and Dahlous, K.A. and Shibl, M.F. and Al-Qahtani, N.H. (2024) Development of Biocompatible Electrospun PHBV-PLLA Polymeric Bilayer Composite Membranes for Skin Tissue Engineering Applications. Molecules, 29 (9).

Jamaludin, N.F. and Ab Muis, Z. and Hashim, H. and Mohamed, O.Y. and Lek Keng, L. (2024) A holistic mitigation model for net zero emissions in the palm oil industry. Heliyon, 10 (6).

Jamil, F. and Hussain Muhammad, M. and Hussain, M. and Akhter, P. and Sarwer, A. and Inayat, A. and Johari, K. and Shezad, N. and Hoon Lee, S. and Park, Y.-K. (2024) Life cycle assessment with the transition from lignocellulose- to microalgae-based biofuels: A review. Journal of Industrial and Engineering Chemistry, 133. pp. 53-64.

Jati, H. and Ilyasa, N.A. and Dominic, D.D. (2024) Enhancing Humanoid Robot Soccer Ball Tracking, Goal Alignment, and Robot Avoidance Using YOLO-NAS. Journal of Robotics and Control (JRC), 5 (3). pp. 829-838.

Javaid, M.A. and Cheema, S.A. and Nasir, N. and Ahmad, S. and Hussain, M.T. and Tanveer, Z. and Mustafa, M.Z.U. and Tahir, U. and Ali, S. (2024) Exploring the synergistic effect of carboxymethyl cellulose and chitosan in enhancing thermal stability of polyurethanes through statistical mixture design approach. International Journal of Biological Macromolecules, 267. ISSN 01418130

Jawed, S. and Faye, I. and Malik, A.S. (2024) Deep Learning-Based Assessment Model for Real-Time Identification of Visual Learners Using Raw EEG. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 32. pp. 378-390.

Johari, S.A.M. and Ayoub, M. and Zhi, L.J. and Rashidi, N.A. and Shamsuddin, M.R. (2024) Utilization of dairy waste scum oil for microwave-assisted biodiesel production over KOH-waste eggshell based calcium oxide catalyst. International Journal of Renewable Energy Development, 13 (2). pp. 294-302.

Joseph, E. and Singh, B.S.M. and Ching, D.L.C. (2024) Application of Circuit Model for Early Fault Detection. Lecture Notes in Mechanical Engineering. pp. 3-11. ISSN 21954356

Junaid, L. and Bilal, K. and Shuja, J. and Balogun, A.O. and Rodrigues, J.J.P.C. (2024) Blockchain-Enabled Framework for Transparent Land Lease and Mortgage Management. IEEE Access, 12. pp. 54005-54018. ISSN 21693536

Junoh, H. and Awang, N. and Ahmad, S.N.A. and Azhar, M. and Jaafar, J. and Nordin, N.A.H.M. and Ismail, A.F. and Qtaishat, M.R. and Matsuura, T. and Othman, M.H.D. and Rahman, M.A. and Zainoodin, A.M. (2024) Contribution of zeolitic imidazolate framework-8 in improving the performance of polymer electrolyte membrane for direct methanol fuel cell. Journal of Solid State Chemistry, 329.

Kabeb, S.M. and Hassan, A. and Ahmad, F. (2024) Synergistic enhancement: Ammonium Polyphosphate's impact on hybrid coating performance against corrosion and fire. Polymers for Advanced Technologies, 35 (4).

Kamarudin, K.A.C. and Zulkifli, S.A.M. and Abro, G.E.M. (2024) Integrating Dynamic Limiting Mechanism in Electric Scooters to Mitigate Range Anxiety via SoC-Tracking Range-Enhancement Attachment (STRETCH). Communications in Computer and Information Science, 1911 C. pp. 466-482.

Kan, K.W. and Chan, Y.J. and Tiong, T.J. and Lim, J.W. (2024) Maximizing biogas yield from palm oil mill effluent (POME) through advanced simulation and optimisation techniques on an industrial scale. Chemical Engineering Science, 285. ISSN 00092509

Karam, S.N. and Bilal, K. and Khan, A.N. and Shuja, J. and Abdulkadir, S.J. (2024) Energy-efficient routing protocol for reliable low-latency Internet of Things in oil and gas pipeline monitoring. PeerJ Computer Science, 10. ISSN 23765992

Kazem, H.A. and Chaichan, M.T. and Al-Waeli, A.H.A. and Sopian, K. (2024) A systematic review of photovoltaic/thermal applications in heat pumps systems. Solar Energy, 269.

Kehkashan, T. and Alsaeedi, A. and Yafooz, W.M.S. and Ismail, N.A. and Al-Dhaqm, A. (2024) Combinatorial Analysis of Deep Learning and Machine Learning Video Captioning Studies: A Systematic Literature Review. IEEE Access, 12. pp. 35048-35080. ISSN 21693536

Khairi, M.M.D. and Alzanam, A.A.A. and Yuossf, T.M. and Roshan, A.A. (2024) Investigation on Behavior of New Structures for Airbus A380 Wing Rib Feet Using Fiber Metal Laminates. Lecture Notes in Mechanical Engineering. pp. 59-70. ISSN 21954356

Khalid, A.H. and Muhamad Said, M.F. and Veza, I. and Abas, M.A. and Roslan, M.F. and Abubakar, S. and Jalal, M.R. (2024) Hydrogen port fuel injection: Review of fuel injection control strategies to mitigate backfire in internal combustion engine fuelled with hydrogen. International Journal of Hydrogen Energy, 66. pp. 571-581.

Khan, J.A. and Cai, B. and Zhang, Y. and Zainal, A.Z.B. and Shao, X. and Wang, C. and Maoinser, M.A.B. (2024) Smart standalone screen completion strategy for sand control by balancing fluid influx: A review on sand retention for screen selection, acoustic sand leak detection and sand removal methods from subsurface to surface. Powder Technology, 436.

Khan, J.A. and Kim, J. and Irawan, S. and Permatasar, K.A. and Verdin, P.G. and Cai, B. and Yekeen, N. (2024) Application of foam assisted water-alternating-gas flooding and quantification of resistivity and water saturation by experiment and simulation to determine foam propagation in sandstone. Heliyon, 10 (3).

Khan, J.A. and Zainal, A.Z. and Idris, K.N. and Herman, A.P. and Cai, B. and Maoinser, M.A. (2024) Sand screen selection by sand retention test: a review of factors affecting sand control design. Journal of Petroleum Exploration and Production.

Khan, L.U. and Mustafa, E. and Shuja, J. and Rehman, F. and Bilal, K. and Han, Z. and Hong, C.S. (2024) Federated Learning for Digital Twin-Based Vehicular Networks: Architecture and Challenges. IEEE Wireless Communications, 31 (2). pp. 156-162. ISSN 15361284

Khan, M.A. and Khan, R. and Al-Zghoul, T.M. and Khan, A. and Hussain, A. and Baarimah, A.O. and Arshad, M.A. (2024) Optimizing municipal solid waste management in urban Peshawar: A linear mathematical modeling and GIS approach for efficiency and sustainability. Case Studies in Chemical and Environmental Engineering, 9.

Khan, M.A. and Mustaffa, Z. and Harahap, I.S.H. (2024) Dynamic response of dilute to viscous channelized debris flow on pipeline crossing. Natural Hazards, 120 (6). pp. 5141-5161.

Khan, R. and Mourad, A.-H.I. and Wieczorowski, M. and Damjanovi�, D. and Pao, W. and Elsheikh, A. and Seikh, A.H. (2024) Erosion-corrosion failure analysis of the elbow pipe of steam distribution manifold. Engineering Failure Analysis, 160.

Khan, R. and Ullah, S. and Qahtani, F. and Pao, W. and Talha, T. (2024) Experimental and numerical investigation of hydro-abrasive erosion in the Pelton turbine buckets for multiphase flow. Renewable Energy, 222.

Khan, R. and Wieczorowski, M. and Mourad, A.-H.I. and Seikh, A.H. and Ahmed, T. (2024) Evaluation of erosion of AISI 1045 carbon steel due to non-cohesive microparticles. Journal of Materials Research and Technology, 28. pp. 1423-1432.

Khan, R. and Wieczorowski, M. and Qureshi, A. and Ammar, M. and Ahmed, T. and Khan, U. (2024) Recent Trends in Artificial Intelligence and Machine Learning Methods Applied to Water Jet Machining. Lecture Notes in Mechanical Engineering. pp. 34-45.

Khan, S. and Qureshi, K.M. and Luyao, Z. and Lup, A.N.K. and Patah, M.F.A. and Chuah, C.Y. and Wan Daud, W.M.A. (2024) Jet fuel production via palm oil hydrodeoxygenation over bifunctional zeolite mixture supported Ni catalyst: Effect of Si/Al ratio. Biomass and Bioenergy, 185.

Khan, U. and Pao, W. and Pilario, K.E. and Sallih, N. (2024) Flow regime classification using various dimensionality reduction methods and AutoML. Engineering Analysis with Boundary Elements, 163. pp. 161-174.

Khan, Z.A. and Aziz, I.A. (2024) Ripple-Induced Whale Optimization Algorithm for Independent Tasks Scheduling on Fog Computing. IEEE Access, 12. pp. 65736-65753. ISSN 21693536

Khan, Z.A. and Aziz, I.A. and Osman, N.A.B. and Nabi, S. (2024) Parallel Enhanced Whale Optimization Algorithm for Independent Tasks Scheduling on Cloud Computing. IEEE Access, 12. pp. 23529-23548. ISSN 21693536

Khandal, S.V. and Razak, A. and Veza, I. and Afzal, A. and Alwetaishi, M. and Shaik, S. and A�bulut, �. and Rashedi, A. (2024) Hydrogen and dual fuel mode performing in engine with different combustion chamber shapes: Modelling and analysis using RSM-ANN technique. International Journal of Hydrogen Energy, 52. pp. 973-1005.

Khatoon, R. and Ho, Y.-C. and Kutty, S.R.B.M. and Jumbri, K. and Myo Thant, M.M. and Han, D.S. (2024) Lithium and Boron Recovery From Oil Field Produced Water: A Mini Review. Lecture Notes in Civil Engineering, 324. pp. 119-131. ISSN 23662557

Khatri, T.K. and Hashmani, M.A. and Taib, H. and Abdullah, N. and Rahim, L.A. (2024) Anomalies in Mooring (Thin) Lines: Causes, Risk Mitigations, and Real Time Consequences of Failure � A Comprehensive Review. Communications in Computer and Information Science, 2001 C. pp. 260-273.

Kiatkittipong, W. and Lim, J.W. (2024) Reinventing Processes for Sustainability via Process Intensification and Integration. Processes, 12 (1). ISSN 22279717

Kim, D.K. and Looi, C.K. and Topa, A. and Cho, N.K. (2024) Prediction of mechanical response of hexagonal honeycomb SPS blast wall under explosive loading: In-depth review and empirical formula. Ocean Engineering, 293.

Kim, D.K. and Wong, A.M.K. and Hwang, J. and Li, S. and Cho, N.-K. (2024) A novel formula for predicting the ultimate compressive strength of the cylindrically curved plates. International Journal of Naval Architecture and Ocean Engineering, 16.

Koay, K.Y. and Lim, W.M. and Khoo, K.L. and Xavier, J.A. and Poon, W.C. (2024) Consumers� motivation to purchase second-hand clothing: a multimethod investigation anchored on belief elicitation and theory of planned behavior. Journal of Product and Brand Management.

Koundal, N. and Abdalhadi, A. and Al-Quraishi, M.S. and Elamvazuthi, I. and Moosavi, M.S. and Guillet, C. and Merienne, F. and Saad, N.M. (2024) Effect of Interruptions and Cognitive Demand on Mental Workload: A Critical Review. IEEE Access, 12. pp. 54405-54425. ISSN 21693536

Lah, N.F.C. and Yusoff, P.S.M.M. and Yogaraj, J.R. and Mustapha, M. and Delan, E.H. and Yee, J.F.F. (2024) Corrosion Study of Carbon Steel in High-Acidic Environment: H2S and CO2�H2S Comparison. Lecture Notes in Mechanical Engineering. pp. 299-307. ISSN 21954356

Lahimer, A.A. and Razak, A.A. and Sopian, K. (2024) Investigation of Thermal Similarity and Performances of Solar Thermal Air Collector with Heat-Soaked Vehicle Cabin. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 116 (1). pp. 223-241.

Lakhina, U. and Elamvazuthi, I. and Badruddin, N. and Jangra, A. and Huy, T.H.B. and Guerrero, J.M. (2024) Generation Cost Minimization in Microgrids Using Optimization Algorithms. Lecture Notes in Electrical Engineering, 1116. pp. 111-124. ISSN 18761100

Lalji, S.M. and Ali, S.I. and Ali, S.M. and Zia, Y.K. and Burney, M. and Yousufi, M.M. and Asad, M. and Junaid, M. (2024) Investigation of silica coated iron oxide nanoparticles and activated carbon as a potential fluid loss additive and Pakistan shale inhibitor in water-based mud system coupled with advance image processing technique. Chemical Papers. ISSN 03666352

Lam, S.-M. and Sin, J.-C. and Zeng, H. and Li, H. and Lin, H. and Huang, L. and Lim, J.-W. and Dong, K. (2024) Improved aquaculture wastewater treatment and concomitant power generation in a photoelectrocatalytic fuel cell equipped with S-scheme Fe2WO6/ZnO nanorod arrays photoanode and NiFe2O4 cathode. Separation and Purification Technology, 329.

Lashari, N. and Hussain, T. and Ganat, T. and Kalam, S. and Hussain, K. and Aslam, S. and Ahmed, S. (2024) Synergistic effect of graphene oxide and partially hydrolyzed polyacrylamide for enhanced oil recovery: Merging coreflood experimental and CFD modeling approaches. Journal of Molecular Liquids, 394.

Lathbl, M.A. and Haque, A.E. and Hakimi, M.H. and Lashin, A. and Qadri, S.M.T. (2024) Organic geochemical characteristics of the Late Cretaceous coal and carbonaceous shale succession from the Taranaki Basin, New Zealand: Implications for sedimentary environmental setting and petroleum generation potential. Geological Journal.

Latiff, Z.A. and Mehat, N.M. and Rauf, N.A.A.A. and Kamaruddin, S. (2024) Optimization of Topology and Mechanical Properties of 3D Printed Hollow and Thin-Walled Structures via Integration of Taguchi Method and Grey Relational Analysis. Journal of Advanced Research in Applied Mechanics, 115 (1). pp. 18-35.

Le, H.T. and Punurai, W. and Yubonmhat, K. and Yuliati, E. and Leow, J.-S. and Kang, H.-S. and Amelia, S. and Yaakob, O.B. and Zawawi, N.A.W. and Wang, J. and Van Le, S. (2024) Naturally Occurring Radioactive Material Waste Management in the ASEAN Oil and Gas Industry: A Review. Journal of Hazardous, Toxic, and Radioactive Waste, 28 (1). ISSN 21535493

Le, H.V. and Chong, S.L. (2024) The Dynamics of Critical Thinking Skills: A Phenomenographic Exploration from Malaysian and Vietnamese Undergraduates. Thinking Skills and Creativity, 51.

Lee, A. and Lan, J.C.-W. and Jambrak, A.R. and Chang, J.-S. and Lim, J.W. and Khoo, K.S. (2024) Upcycling fruit waste into microalgae biotechnology: Perspective views and way forward. Food Chemistry: Molecular Sciences, 8.

Lee, Y.X. and Ahmad, F. and Karuppanan, S. and Sumby, C. and Shahed, C.A. and Ramli, S.H. (2024) Thermo-mechanical performance of wolframite mineral reinforced siloxane-modified epoxy-based intumescent coating for structural steel. Polymers for Advanced Technologies, 35 (1).

Lestari, I.G.A.A.I. and Diputera, I.G.A. and Baarimah, A.O. and Alaloul, W.S. and Musarat, M.A. and Alawag, A.M. and Alzubi, K.M. (2024) Traditional Practices and Potential of Industrial Revolution 4.0 in the Construction Projects. Lecture Notes in Civil Engineering, 324. pp. 647-660. ISSN 23662557

Li, H.-J. and Cai, B.-P. and Yuan, X.-B. and Kong, X.-D. and Liu, Y.-H. and Khan, J.A. and Chu, Z.-D. and Yang, C. and Tang, A.-B. (2024) Three-Dimensional Sound Source Location Algorithm for Subsea Leakage Using Hydrophone. China Ocean Engineering, 38 (2). pp. 326-337.

Liaw, K.L. and Kurnia, J.C. and Sallih, N. and Mustapha, M. and Sasmito, A.P. (2024) Heat transfer analysis of subcooled flow boiling in copper foam helical coiled heat exchanger � A pore-scale numerical study. International Communications in Heat and Mass Transfer, 155. ISSN 07351933

Liaw, K.L. and Rosle, A.F.H.B. and Hendarti, R. and Kurnia, J.C. (2024) Thermal Performance Evaluation of Heat Sink with  Pin Fin, Metal Foam and Dielectric Coolant. Lecture Notes in Mechanical Engineering. pp. 35-49. ISSN 21954356

Liew, Z.-S. and Ho, Y.-C. and Lau, W.J. and Nordin, N.A.H.M. and Lai, S.-O. and Ma, J. (2024) Altering substrate properties of thin film nanocomposite membrane by Al2O3 nanoparticles for engineered osmosis process. Environmental Technology (United Kingdom), 45 (6). pp. 1052-1065.

Lim, C.E. and Chew, C.L. and Pan, G.-T. and Chong, S. and Arumugasamy, S.K. and Lim, J.W. and Al-Kahtani, A.A. and Ng, H.-S. and Abdurrahman, M. (2024) Predicting microbial fuel cell biofilm communities and power generation from wastewaters with artificial neural network. International Journal of Hydrogen Energy, 52. pp. 1052-1064.

Lim, H.Y. and Rashidi, N.A. and Othman, M.F.H. and Ismail, I.S. and Saadon, S.Z.A.H. and Chin, B.L.F. and Yusup, S. and Rahman, M.N. (2024) Recent advancement in thermochemical conversion of biomass to biofuel. Biofuels, 15 (5). pp. 587-604. ISSN 17597269

Lim, H.Y. and Yusup, S. and Acda, M.N. and Chin, B.L.F. and Rianawati, E. and Unrean, P. and Yiin, C.L. and Quitain, A.T. and Assabumrungrat, S. (2024) Investigation of Calcium Oxide�Impregnated Zeolite Catalyst Toward Catalytic Pyrolysis of Oil Palm Empty Fruit Bunch: Bio-oil Yields, Characterizations, and Kinetic Study. Bioenergy Research, 17 (1). pp. 419-433.

Lim, K.-L. and Sin, J.-C. and Lam, S.-M. and Zeng, H. and Lin, H. and Li, H. and Huang, L. and Lim, J.-W. (2024) Controlled solvothermal synthesis of self-assembled SrTiO3 microstructures for expeditious solar-driven photocatalysis dye effluents degradation. Environmental Research, 251.

Lim, Y.K. and Tan, I.S. and Foo, H.C.Y. and Tan, Y.H. and Lam, M.K. and Wong, M.K. (2024) Exergetic and exergoeconomic analyses of Eucheuma cottoni residue biorefinery for co-production of polylactic acid and electricity. Energy, 300.

Ling, H.M. and Yew, M.C. and Yew, M.K. and Saw, L.H. (2024) Analyzing recent active and passive cool roofing technology in buildings, including challenges and optimization approaches. Journal of Building Engineering, 89.

Ling Ho, M. and Chian Yew, M. and Kun Yew, M. and Huat Saw, L. and Cheong Tan, W. and Kwok Kit Yuen, R. (2024) Novel cool roofing technology system with sustainable design for attic temperature reduction. Ain Shams Engineering Journal, 15 (5).

Lipu, M.S.H. and Miah, M.S. and Jamal, T. and Rahman, T. and Ansari, S. and Rahman, M.S. and Ashique, R.H. and Shihavuddin, A.S.M. and Shakib, M.N. (2024) Artificial Intelligence Approaches for Advanced Battery Management System in Electric Vehicle Applications: A Statistical Analysis towards Future Research Opportunities. Vehicles, 6 (1). pp. 22-70.

Low, J.Y. and Khe, C.S. and Usman, F. and Hassan, Y.M. and Lai, C.W. and You, K.Y. and Lim, J.W. and Khoo, K.S. (2024) Review on demulsification techniques for oil/water emulsion: Comparison of recyclable and irretrievable approaches. Environmental Research, 243.

Lu, C.-K. and Liew, W.S. and Tang, T.B. and Lin, C.-H. (2024) Implementation of a Convolutional Neural Network Into an Embedded Device for Polyps Detection. IEEE Embedded Systems Letters, 16 (1). pp. 5-8. ISSN 19430663

Ma, Q. and Rejab, M.R.M. and Azeem, M. and Hassan, S.A. and Yang, B. and Kumar, A.P. (2024) Opportunities and challenges on composite pressure vessels (CPVs) from advanced filament winding machinery: A short communication. International Journal of Hydrogen Energy, 57. pp. 1364-1372.

Ma, Y. and Mustapha, F. and Ishak, M.R. and Abdul Rahim, S. and Mustapha, M. (2024) Structural fault diagnosis of UAV based on convolutional neural network and data processing technology. Nondestructive Testing and Evaluation, 39 (2). pp. 426-445. ISSN 10589759

Maamor, N. and Daud, H. and Aris, M.N.M. and Jaini, N.I. and Othman, M. and Kadir, E.A. (2024) A Comparative Study on the Performance of Covariance Functions in Gaussian Process Regression model: Application to Global Wheat Price. Journal of Advanced Research in Applied Sciences and Engineering Technology, 42 (1). pp. 215-225.

Mahat, S.Q.A. and Saaid, I.M. and Sauki, A. and Aja, A.A. and Ridzuan, N. and Ismail, N. (2024) FROM TRADITIONAL TO GREEN: EVOLUTION OF SHALE SWELLING INHIBITORS FOR SUSTAINABLE DRILLING Daripada Tradisional Ke Hijau: Evolusi Pencegahan Pembengkakan Syal Untuk Penggerudian Lestari. Malaysian Journal of Analytical Sciences, 28 (2). pp. 348-364.

Mahdi, S.N. and Imjai, T. and Wattanapanich, C. and Garcia, R. and Kaur, H. and Musarat, M.A. (2024) Life Cycle Cost Analysis of Flexible Pavements Reinforced with Geo-Synthetics: A Case Study of New Construction or Repair Overlays in Thailand's Roads. Engineered Science, 28.

Mahmud, I. and Ismail, I. and Abdulkarim, A. and Shehu, G.S. and Olarinoye, G.A. and Musa, U. (2024) Selection of an appropriate maintenance strategy using analytical hierarchy process of cement plant. Life Cycle Reliability and Safety Engineering. ISSN 25201352

Mahmudah, A.M.H. and Budiarto, A. and Joewono, T.B. and Asmaningrum, T.H. and Dharmowijoyo, D.B.E. (2024) Did in-home activities fulfill activity needs during the COVID-19 pandemic? Cogent Engineering, 11 (1).

Maiwada, U.D. and Danyaro, K.U. and Sarlan, A. and Liew, M.S. and Taiwo, A. and Audi, U.I. (2024) Energy efficiency in 5G systems: A systematic literature review. International Journal of Knowledge-Based and Intelligent Engineering Systems, 28 (1). pp. 93-132.

Malik, A.A. and Rusli, R. and Nazir, S. and Wong, R.H. and Arshad, U. (2024) Grid-based assessment of hydrogen leakages for an offshore process to improve the design and human performance. Process Safety Progress, 43 (S1). S35-S49.

Malik, K. and Ahmad, F. and Dawood, M.S. and Islam, M.S. and Ali, S. and Raza, A. and Shahed, C.A. (2024) Mechanical property enhancement of graphene-kenaf-epoxy multiphase composites for automotive applications. Composites Part A: Applied Science and Manufacturing, 177. ISSN 1359835X

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Shahed, C.A. (2024) Mechanical Investigation of Kenaf/Carbon Hybrid Composites for Building and Construction Applications. Journal of Composites for Construction, 28 (1).

Mamman, H. and Basri, S. and Balogun, A.O. and Imam, A.A. and Kumar, G. and Capretz, L.F. (2024) BiasTrap: Runtime Detection of Biased Prediction in Machine Learning Systems. Journal of Advanced Research in Applied Sciences and Engineering Technology, 40 (2). pp. 127-139.

Maqsood, T. and uz Zaman, S.K. and Qayyum, A. and Rehman, F. and Mustafa, S. and Shuja, J. (2024) Adaptive thresholds for improved load balancing in mobile edge computing using K-means clustering. Telecommunication Systems. ISSN 10184864

Maqsoom, A. and Hammad, M. and Umer, M. and Alaloul, W.S. and Ashraf, H. and Musarat, M.A. and Nazir, T. (2024) Socio-environmental factors and solar housing system adoption: moderating effect of attitude. Innovative Infrastructure Solutions, 9 (3).

Maqsoom, A. and Prasittisopin, L. and Musarat, M.A. and Ullah, F. and Alqahtani, F.K. (2024) Construction Price Index Prediction through ARMA with Inflation Effect: Case of Thailand Construction Industry. Buildings, 14 (5).

Maray, M. and Mustafa, E. and Shuja, J. (2024) Wireless Power Assisted Computation Offloading in Mobile Edge Computing: A Deep Reinforcement Learning Approach. Human-centric Computing and Information Sciences, 14.

Marode, R.V. and Awang, M. and Lemma, T.A. and Pedapati, S.R. and Hassan, A. and Janga, V.S.R. (2024) Numerical analysis of temperature and material flow predictions with defects in the friction stir processing of AZ91 alloy: An advanced meshfree SPH technique. Engineering Analysis with Boundary Elements, 161. pp. 48-69.

Marode, R.V. and Awang, M. and Lemma, T.A. and Pedapati, S.R. and Hassan, A. and Janga, V.S.R. and Alam, M.A. and Loyte, A. and Devarajan, Y. (2024) Friction stir processing of AZ91 hybrid composites with exfoliated multi-layered graphene: A Taguchi-Grey relational analysis. Journal of Alloys and Compounds, 972.

Mattins, R.F. and Sarobin, M.V.R. and Aziz, A.A. and Srivarshan, S. (2024) Object detection and classification of butterflies using efficient CNN and pre-trained deep convolutional neural networks. Multimedia Tools and Applications, 83 (16). pp. 48457-48482. ISSN 13807501

Md Hanafiah, N.H. and Othman, A.R. and Ovinis, M. (2024) The Optimization of Vacuum-Bagging Processing in Oven Cure for Tensile Strength in Composite Laminate. Journal of Advanced Research in Applied Sciences and Engineering Technology, 37 (1). pp. 37-48.

Md Hanafiah, N.H. and Othman, A.R. and Ovinis, M. (2024) Significant Effect of Vacuum Bagging Processing on Inter-Laminar Shear Strength and Voids of Composite in Oven Cure. Journal of Advanced Research in Applied Sciences and Engineering Technology, 37 (1). pp. 69-81.

Md Jamil, M.N.B. and Omar, M. and Ibrahim, R. and Bingi, K. and Faqih, M. (2024) Rectenna System Development Using Harmonic Balance and S-Parameters for an RF Energy Harvester. Sensors, 24 (9).

Memon, A.M. and Sutanto, M.H. and Memon, Z.A. and Khahro, S.H. and Memon, R.A. (2024) Valorization of petroleum sludge as rejuvenator for recycled asphalt binder and mixture. Case Studies in Construction Materials, 20.

Memon, M.B. and Yang, Z. and Qazi, W.H. and Pathan, S.M. and Chalgri, S.R. (2024) Assessing Soil Bulk Density, Plasticity Index, Porosity, and Degree of Saturation through Electrical Resistivity using Correlation Analysis. Malaysian Journal of Soil Science, 28. pp. 12-25.

Meraj, S.T. and Yu, S.S. and Rahman, M.S. and Arefin, A.A. and Lipu, M.S.H. and Trinh, H. (2024) A novel extendable multilevel inverter for efficient energy conversion with fewer power components: Configuration and experimental validation. International Journal of Circuit Theory and Applications, 52 (6). pp. 2760-2785.

Mir, A.M. and Bashir, F. and Khanday, F.A. and Zahoor, F. and Hanif, M. and May, Z. (2024) Design and Optimization of High Performance P3HT: PCBM Polymer Solar Cell Using P3HT Buffer Layer. IEEE Access, 12. pp. 10961-10969. ISSN 21693536

Miskan, S.N. and Abdulkadir, B.A. and Ainirazali, N. and Abd Jalil, A. and Lim, J.W. and Setiabudi, H.D. (2024) Unveiling the effects of nickel loading on methane dry reforming: Perspectives from ni/fibrous Zeolite-Y catalysts. International Journal of Hydrogen Energy.

Miskan, S.N. and Setiabudi, H.D. and Bahari, M.B. and Vo, D.-V.N. and Abdullah, B. and Jalil, A.A. and Muhammad, S.A.F.S. and Ismail, S.B. (2024) Properties-activity correlation of Nickel supported on fibrous Zeolite-Y for dry reforming of methane. International Journal of Hydrogen Energy, 52. pp. 268-277.

Mohamed, M. and Zakuan, N.D. and Tengku Hassan, T.N.A. and Lock, S.S.M. and Mohd Shariff, A. (2024) Global Development and Readiness of Nuclear Fusion Technology as the Alternative Source for Clean Energy Supply. Sustainability (Switzerland), 16 (10). ISSN 20711050

Mohammad, M. and Othman, A.R. and Ismail, M.F. (2024) Influence of high temperature during tensile test for stainless steel using acoustic emission. Process Safety Progress, 43 (S1). S108-S115. ISSN 10668527

Mohammed, B.S. and Min, T.H. and Sutanto, M.H. and Joewono, T.B. and As�ad, S. (2024) Preface. Lecture Notes in Civil Engineering, 324. v. ISSN 23662557

Mohanty, R. and Chatterjee, D. and Mohanty, S. and Shrivastava, S. and Dash, S.K. and Gautam, S.P. and Bingi, K. (2024) Lower Output Voltage Harmonics With Optimum Switching Angles of Single PV-Source Based Reduced Switch Multilevel Inverter Using BWO Algorithm. IEEE Access, 12. pp. 5054-5065. ISSN 21693536

Mohd Adha, M.E. and Masdi, M. and Hilmi, H. (2024) Prescriptive Analytics for Dynamic Risk-Based Naval Vessel Maintenance Decision-Making. Lecture Notes in Mechanical Engineering. pp. 345-359. ISSN 21954356

Mohd Ahir, Z.F. and Sepeai, S. and Mohd Sinin, N.A. and Mohd Rais, A.R. and Sopian, K. and Ibrahim, M.A. (2024) Reduced Toxicity and Aqueous-Based Solvent Using Phosphoric Acid as the Dopant Source for Formation Emitter Layer of Silicon Solar Cells. Silicon, 16 (1). pp. 307-321.

Mohd Aji, A.Q. and Raya, S.A. (2024) Application of Fatty Acid Methyl Ester from Biomass for CO2-Crude Oil MMP Reduction. Arabian Journal for Science and Engineering.

Mohd Asri, N.H. and Che Ani, M.N. and Kamaruddin, S. and Azid, I.A. (2024) A Review of Six Sigma Implementation in Manufacturing Industries. SpringerBriefs in Applied Sciences and Technology, Part F. pp. 9-15.

Mohd Johari, S.A. and Ahmad Farid, M.A. and Ayoub, M. and Rashidi, N.A. and Andou, Y. (2024) Optimization and kinetic studies for biodiesel production from dairy waste scum oil via microwave assisted transesterification. Environmental Technology and Innovation, 34.

Mohd Johari, S.A. and Ayoub, M. and Rashidi, N.A. and Hassan, M. (2024) Syntheses and characterization of lithium modified cao from eggshell and cow bone and its performance in biodiesel production from dairy waste scum oil (DWSO). Journal of Material Cycles and Waste Management, 26 (3). pp. 1394-1402.

Mohd Noor, N. and Elgharbawy, A.A.M. and Moniruzzaman, M. and Goto, M. (2024) Unlocking the Anticancer Potential of Ionic Liquids. ChemBioEng Reviews, 11 (2). pp. 231-252. ISSN 21969744

Mohd Saleh, S. and Oh, P.C. and M Zain, M. and Quek, V.C. and Zulkifli, A.S. and Chew, T.L. (2024) Revolutionizing CO2 reduction with TiO2 photocatalyst immobilized on polytetrafluoroethylene (PTFE) membrane. Journal of Industrial and Engineering Chemistry, 131. pp. 230-239.

Mohialdeen, I.M.J. and Hakimi, M.H. and Fatah, S.S. and Abdula, R.A. and Khanaqa, P.A. and Lathbl, M.A. and Naseem, W. (2024) Organic Geochemistry and 1-D Basin Modeling of the Late Triassic Baluti Formation: Implication of Shale Oil Potential in the Kurdistan Region of Iraq. ACS Omega, 9 (6). pp. 7085-7107.

Mok, T.H. and Guo, T. and Wong, T.L.X. and Mohd Hasan, M.R. and Kassim, M.A. and Al-Sabaeei, A. (2024) Effects of Beta-Carotene Palm Oil on Asphalt Binder Properties and Coatability Performance. Lecture Notes in Civil Engineering, 385. pp. 27-41.

Muazu, A.A. and Hashim, A.S. and Maiwada, U.D. and Isma'ila, U.A. and Yakubu, M.M. and Ibrahim, M.A. (2024) Pairwise test case generation with harmony search, one-parameter-at-at-time, seeding, and constraint mechanism integration. International Journal of Electrical and Computer Engineering, 14 (3). pp. 3137-3149.

Muhammad, A.Z. and Norman, M.A.M. and Mohammad, M. and Amzah, A. (2024) Effect of Crack Length, Depth, and Location on Natural Frequencies of Railway Track. Lecture Notes in Networks and Systems, 850. pp. 31-49.

Mukesh, R. and Dass, S.C. and Vijay, M. and Kiruthiga, S. and Sagayam, V. (2024) Prediction of ionospheric TEC by LSTM and OKSM during M class solar flares occurred during the year 2023. Astrophysics and Space Science, 369 (3).

Mukhtar, B. and Shad, M.K. and Lai, F.W. (2024) Fostering sustainability performance in the Malaysian manufacturing companies: the role of green technology innovation and innovation capabilities. Benchmarking.

Mukhtar, B. and Shad, M.K. and Woon, L.F. and Haider, M. and Waqas, A. (2024) Integrating ESG disclosure into the relationship between CSR and green organizational culture toward green Innovation. Social Responsibility Journal, 20 (2). pp. 288-304.

Munir, H.M.B. and Yasin, S. and Iqbal, T. and Qamar, S. and Ahmad, A. and Mahmood, H. and Moniruzzaman, M. (2024) Thermomechanical evaluation of zinc oxide/hydroxyapatite/high-density polyethylene hybrid composites. Journal of Applied Polymer Science. ISSN 00218995

Murad, N.Y. and Hasan, M.H. and Azam, M.H. and Yousuf, N. and Yalli, J.S. (2024) Unraveling the Black Box: A Review of Explainable Deep Learning Healthcare Techniques. IEEE Access, 12. pp. 66556-66568. ISSN 21693536

Murugaya, K. and Misdan, N. and Awang, N. and Ling, H.H. and Madon, R.H. and Hairom, N.H.H. and Razali, N.F. and Yusof, N. and Jaafar, J. and Nordin, N.A.H.M. and Ali, F. (2024) Preparation and Characterizations of Triptycene Integrated Poly (Arylene Ether Sulfone) Based Block and Random Copolymers. International Journal of Engineering Trends and Technology, 72 (2). pp. 133-141.

Musarat, M.A. and Alaloul, W.S. and Khan, A.M. and Ayub, S. and Jousseaume, N. (2024) A survey-based approach of framework development for improving the application of internet of things in the construction industry of Malaysia. Results in Engineering, 21.

Musarat, M.A. and Alaloul, W.S. and Khan, M.H.F. and Ayub, S. and Guy, C.P.L. (2024) Evaluating cloud computing in construction projects to avoid project delay. Journal of Open Innovation: Technology, Market, and Complexity, 10 (2).

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. (2024) Incorporating inflation rate in construction projects cost: Forecasting model. Heliyon, 10 (4).

Musarat, M.A. and Alaloul, W.S. and Zainuddin, S.M.B. and Qureshi, A.H. and Maqsoom, A. (2024) Digitalization in malaysian construction industry: Awareness, challenges and opportunities. Results in Engineering, 21.

Musarat, M.A. and Khan, A.M. and Alaloul, W.S. and Blas, N. and Ayub, S. (2024) Automated monitoring innovations for efficient and safe construction practices. Results in Engineering, 22.

Musarat, M.A. and Maqsoom, A. and Naeem, M.H. and Ullah, F. and Salman, A. and Alaloul, W.S. and Zahoor, H. (2024) Evaluating the correlation between project selection criteria and organizational performance within the construction industry. Ain Shams Engineering Journal, 15 (7).

Mustafa, E. and Shuja, J. and Rehman, F. and Riaz, A. and Maray, M. and Bilal, M. and Khan, M.K. (2024) Deep Neural Networks meet computation offloading in mobile edge networks: Applications, taxonomy, and open issues. Journal of Network and Computer Applications, 226.

Mustaffa, Z. and Al-Qadami, E.H.H. and Topa, A. and Budiman, B.A. and Mohd Hamka, N.A. and Bayu Endrayana Dharmowijoyo, D. and Mohammad Razi, M.A. (2024) Numerical assessment of the side impacts on lithium-ion battery module integrated with honeycomb reinforcement. Engineering Failure Analysis, 161.

Mustaffa, Z. and Al-Qadami, E.H.H. and Zaman, A.B.K. and Shah, S.M.H. (2024) Experimental, Numerical and Field Investigations on the Hydraulics Performance of Stormwater Curb-Opening Inlets. Lecture Notes in Civil Engineering, 324. pp. 505-519. ISSN 23662557

Mustapha, A. and Abdul-Rani, A.M. and Saad, N. and Mustapha, M. (2024) Ergonomic principles of road signs comprehension: A literature review. Transportation Research Part F: Traffic Psychology and Behaviour, 101. pp. 279-305.

Mutalib, N.F.A. and Shabani, M.S. and Bustam, M.A. (2024) Formulation of Catalytic Deep Eutectic Solvent for H2S Oxidative Absorption at Ambient Condition with Assistance of Cosmo-Rs. Journal of Advanced Research in Applied Sciences and Engineering Technology, 39 (1). pp. 192-205.

Nabila, F.H. and Islam, R. and Shimul, I.M. and Moniruzzaman, M. and Wakabayashi, R. and Kamiya, N. and Goto, M. (2024) Ionic liquid-mediated ethosome for transdermal delivery of insulin. Chemical Communications, 60 (30). pp. 4036-4039. ISSN 13597345

Nawaz, R. and Hanafiah, M.M. and Ali, M. and Anjum, M. and Baki, Z.A. and Mekkey, S.D. and Ullah, S. and Khurshid, S. and Ullah, H. and Arshad, U. (2024) Review of the performance and energy requirements of metals modified TiO2 materials based photocatalysis for phenolic compounds degradation: A case of agro-industrial effluent. Journal of Environmental Chemical Engineering, 12 (3).

Nazar, M. and Ahmad, A. and Hussain, S.M.S. and Moniruzzaman, M. (2024) Binary mixture of ionic liquid and span 80 for oil spill remediation: Synthesis and performance evaluation. Marine Pollution Bulletin, 202.

Negash, B.M. and Effiong, A.J. and Khan, H.W. and Zulkifli, N.I. (2024) Ion-adsorbed REE clays: Swelling challenges and future solutions. Journal of Molecular Liquids, 403.

Ng, C.Y. and Maldar, N.R. and Ong, M.C. (2024) Numerical investigation on performance enhancement in a drag-based hydrokinetic turbine with a diffuser. Ocean Engineering, 298.

Ngwu, G. and Suleman, H. and Ahmad, F. and Qadir, D. and Shamair, Z. and Nasir, Q. and Nawaz, M. (2024) Passive Direct Air Capture of Carbon Dioxide with an Alkaline Amino Acid Salt in Water-Based Paints. Energies, 17 (2).

Nikbakht, E. and Gad, M. and Chang, J.W. (2024) Push-out tests on steel composite sections with engineered cementitious composite. Engineering Solid Mechanics, 12 (1). pp. 11-16.

Nisa, Z.U. and Chuan, L.K. and Guan, B.H. and Ahmad, F. and Ayub, S. (2024) Role of carbonization parameters on surface and microstructural and crystalline properties of mesoporous coconut shell char: Quantitative and structural study. Journal of Molecular Structure, 1300.

Nizamani, Z. and Soomro, R.A. and Nakayama, A. and Ali, M.O.A. (2024) Flood Susceptibility Mapping Using GIS-AHP of Kuala Krai. Lecture Notes in Civil Engineering, 324. pp. 51-61.

Noor, U. and Mansoor, M. and Shamim, A. (2024) Customers create customers!�Assessing the role of perceived personalization, online advertising engagement and online users' modes in generating positive e-WOM. Asia-Pacific Journal of Business Administration, 16 (2). pp. 392-409.

Nouh, S.A. and KuShaari, K. and Keong, L.K. and Samsuri, S. (2024) Material characterization and inter/intra-particle validation for DEM simulation of urea coating process. Particuology, 88. pp. 32-48.

Numin, M.S. and Jumbri, K. and Kee, K.E. and Borhan, N. and Hassan, A. (2024) Theoretical Understanding of Quaternary Ammonium Surfactant Corrosion Inhibitor in Acetic Acid Media: Computer Modelling. Journal of Advanced Research in Applied Mechanics, 114 (1). pp. 1-12.

Nurchasanah, Y. and Suhendro, B. and Satyarno, I. and Shafiq, N. and Mahendra, A. (2024) Mechanical Properties and Numerical Design of Hybrid Damper of Steel Bar and Engine Mounting Rubber. Civil Engineering and Architecture, 12 (1). pp. 586-606.

Nurika, O. and Jung, L.T. (2024) Assessing Malaysia�s Internet of Things (IoT) Readiness Based On CREATE-IoT Key Performance Indicators. Journal of Advanced Research in Applied Sciences and Engineering Technology, 40 (1). pp. 45-54. ISSN 24621943

Nuthalapati, S. and Kee, K.E. and Ismail, M.C. and Jumbri, K. and Pedapati, S.R. (2024) Comparative study of corrosion behaviour and microstructural analysis of as-received and sensitized SS304 U-bend samples under perlite thermal insulation using chloride drip test. Engineering Failure Analysis, 159.

Nuthalapati, S. and Kee, K.E. and Pedapati, S.R. and Jumbri, K. (2024) A review of chloride induced stress corrosion cracking characterization in austenitic stainless steels using acoustic emission technique. Nuclear Engineering and Technology, 56 (2). pp. 688-706.

Oke, A.E. and Kineber, A.F. and Albukhari, I. and Dada, A.J. (2024) Modeling the robotics implementation barriers for construction projects in developing countries. International Journal of Building Pathology and Adaptation, 42 (3). pp. 386-409. ISSN 23984708

Okonkwo, P.C. and Barhoumi, E.M. and Al Housni, F.K. and Agyekum, E.B. and Emori, W. and Ayodele, B.V. and Sliem, M.H. and Akyuz, E. and Radwan, A.B. (2024) Techno-economic feasibility analysis of hybrid renewable energy sources for a health clinic: A case study. MRS Energy and Sustainability, 11 (1). pp. 136-149. ISSN 23292237

Oluwadamilola Olutoki, J. and Ahmed Siddiqui, N. and Eahsanul Haque, A.K.M. and Daniel Akinyemi, O. and Salisu Mohammed, H. and Bashir, Y. and El-Ghali, M.A.K. (2024) Integrated analysis of wireline logs analysis, seismic interpretation, and machine learning for reservoir characterisation: Insights from the late Eocene McKee Formation, onshore Taranaki Basin, New Zealand. Journal of King Saud University - Science, 36 (6).

Ong, Z.L. and Chang, J.W. and Nikbakht, E. (2024) Ultimate strength of hybrid repaired offshore pipelines with various slenderness ratio subjected to through-thickness pitting corrosion under axial compressive loading. Structures, 60.

Opia, A.C. and Abdollah, M.B. and Amiruddin, H. and Hamid, M.K.A. and Veza, I. and Zawawi, F.B.M. (2024) Synergistic Enhancement of Sunflower Lubricant Incorporated Anti-Wear Eichhornia Crassipes and Tertiary-Butyl-Hydroquinone (TBHQ) Additives. Jordan Journal of Mechanical and Industrial Engineering, 18 (1). pp. 99-112. ISSN 19956665

Osei, H. and Bavoh, C.B. and Lal, B. (2024) Research Advances in Machine Learning Techniques in Gas Hydrate Applications. ACS Omega, 9 (4). pp. 4210-4228.

Osman, H. and Muhamad Rodzey, M.Z.I. and Wong, T.L.X. and Mohd Hasan, M.R. and Al-Sabaeei, A.M. (2024) Coatability and Bonding Characteristics of Asphalt Binders Modified with Alkylamines-Based and Polyalkylene Glycol-Based Bonding Promoters. Lecture Notes in Civil Engineering, 385. pp. 43-66.

Osman, H.I. and Ismail, Z. and Ching, D.L.C. and Omar, N.F.M. and Vieru, D. (2024) Unsteady MHD Casson Fluid Flow through Infinite Inclined Plate in the Presences of Hall Current and Chemical Reaction. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 112 (2). pp. 64-75.

Otchere, D.A. (2024) Fundamental error in tree-based machine learning model selection for reservoir characterisation. Energy Geoscience, 5 (2).

Otchere, D.A. and Latiff, A.H. and Tackie-Otoo, B.N. (2024) Distributed acoustic sensing in subsurface applications � Review and potential integration with artificial intelligence for an intelligent CO2 storage monitoring system. Geoenergy Science and Engineering, 237.

Oza, S. and Kodgire, P. and Kachhwaha, S.S. and Lam, M.K. and Yusup, S. and Chai, Y.H. and Rokhum, S.L. (2024) A review on sustainable and scalable biodiesel production using ultra-sonication technology. Renewable Energy, 226.

Palli, A.S. and JafreezalJaafar and Gilal, A.R. and Alsughayyir, A. and Gomes, H.M. and Alshanqiti, A. and Omar, M. (2024) Online Machine Learning from Non-stationary Data Streams in the Presence of Concept Drift and Class Imbalance: A Systematic Review. Journal of Information and Communication Technology, 23 (1). pp. 105-139.

Parameswaran, J. and Abd Ghani, N. and M Yunus, N.B. and Bt Hasanudin, N. (2024) Evaluating acute toxicity of amino acid ionic liquids towards Poecilia reticulata fish for designing sustainable chemical processes. Toxicology Reports, 12. pp. 414-421.

Parthasarathy, P. and Alherbawi, M. and Shahbaz, M. and Mackey, H.R. and McKay, G. and Al-Ansari, T. (2024) Conversion of oil palm waste into value-added products through pyrolysis: a sensitivity and techno-economic investigation. Biomass Conversion and Biorefinery, 14 (8). pp. 9667-9687.

Pongsiriyakul, K. and Kiatkittipong, W. and Lim, J.W. and Najdanovic-Visak, V. and Wongsakulphasatch, S. and Kiatkittipong, K. and Srifa, A. and Eiad-ua, A. and Boonyasuwat, S. and Assabumrungrat, S. (2024) Biofuel upgrading via catalytic deoxygenation in trickle bed reactor: Crucial issue in selection of pressure regulator type. Fuel, 355.

Poon, W.C. and Kunchamboo, V. and Koay, K.Y. (2024) E-Learning Engagement and Effectiveness during the COVID-19 Pandemic: The Interaction Model. International Journal of Human-Computer Interaction, 40 (2). pp. 393-408.

Poulose, A. and Mathew, A. and Uthaman, A. and Lal, H.M. and Parameswaranpillai, J. and Mathiazhagan, A. and Saheed, M.M. and Grohens, Y. and Pasquini, D. and Gopakumar, D.A. and George, J.J. (2024) Facile fabrication of arecanut palm sheath based robust hydrophobic cellulose nanopapers via self-assembly of ZnO nanoflakes and its shelf-life prediction for sustainable packaging applications. International Journal of Biological Macromolecules, 255.

Praganingrum, T.I. and Pradnyadari, N.L.M.A.M. and Alzubi, K.M. and Alaloul, W.S. and Al Salaheen, M. and Musarat, M.A. and Alawag, A.M. (2024) Image Processing Applications in Construction Projects: Challenges and Opportunities. Lecture Notes in Civil Engineering, 324. pp. 661-672.

Premarathna, K.S.D. and Lau, S.Y. and Chiong, T. and Show, P.-L. and Vithanage, M. and Lam, M.K. (2024) Greening up the fight against emerging contaminants: algae-based nanoparticles for water remediation. Clean Technologies and Environmental Policy.

Purnomo, A. and Syafrianita and Simatupang, T.M. and Mutalib, M.I.B.A. (2024) How managers� green transformational leadership affects green resilient supply chain: The moderating impact of green ambidexterity and green innovation. Uncertain Supply Chain Management, 12 (3). pp. 1611-1624.

Qaddura, M.J. and Ean, L.W. and Mohammed, B.S. and Ng, C.Y. (2024) Numerical Modeling of One-Way Reinforced Concrete Wall Panels with Openings Strengthened with Carbon Fiber Reinforced Polymer (CFRP). Lecture Notes in Civil Engineering, 324. pp. 599-609.

Qadir, D. and Sharif, R. and Nasir, R. and Awad, A. and Mannan, H.A. (2024) A review on coatings through thermal spraying. Chemical Papers, 78 (1). pp. 71-91. ISSN 03666352

Qureshi, A.H. and Alaloul, W.S. and Murtiyoso, A. and Hussain, S.J. and Saad, S. and Musarat, M.A. (2024) Automated Scaling of Point Cloud Rebar Model via ArUco-Supported Controlled Markers. Journal of Construction Engineering and Management, 150 (3). ISSN 07339364

Qureshi, A.H. and Alaloul, W.S. and Murtiyoso, A. and Hussain, S.J. and Saad, S. and Musarat, M.A. (2024) Smart rebar progress monitoring using 3D point cloud model. Expert Systems with Applications, 249.

Qureshi, A.H. and Alaloul, W.S. and Wing, W.K. and Saad, S. and Alzubi, K.M. and Musarat, M.A. (2024) Factors affecting the implementation of automated progress monitoring of rebar using vision-based technologies. Construction Innovation, 24 (3). pp. 770-789. ISSN 14714175

Rabah, F.K.J. and Mushtaha, A.W.H. and Alaloul, W.S. (2024) Developing a Framework for Sustainability Assessment of Reverse Osmosis Desalination Plants in Gaza Strip. Journal of Sustainable Development of Energy, Water and Environment Systems, 12 (1). ISSN 18489257

Ragab, M.G. and Abdulkadir, S.J. and Muneer, A. and Alqushaibi, A. and Sumiea, E.H. and Qureshi, R. and Al-Selwi, S.M. and Alhussian, H. (2024) A Comprehensive Systematic Review of YOLO for Medical Object Detection (2018 to 2023). IEEE Access, 12. pp. 57815-57836. ISSN 21693536

Raheem, A.T. and Aziz, A.R.A. and Zulkifli, S.A. and Ayandotun, W.B. and Baharom, M.B. (2024) Development and Validation of a Free Piston Engine Linear Generator Simulation Model Including Cycle-To-Cycle Variation and Ignition Timing Sub-Models. Lecture Notes in Mechanical Engineering. pp. 239-254. ISSN 21954356

Rahim, A.R.A. and Johari, K. and Hussain, M. (2024) Effect of solvent and calcination process on physicochemical features of silica nanocapsule for CO2 capture. Environmental Engineering Research, 29 (6).

Rahim, H.U. and Ahmad, W. and Jamil, M. and Khalil, R. (2024) Sedimentary facies, diagenetic analysis, and sequence stratigraphic control on reservoir evaluation of eocene sakesar limestone, upper indus basin, NW himalayas. Carbonates and Evaporites, 39 (2).

Rahma Putra, M.H. and Hermana, M. and Yogi, I.B.S. and Hossain, T.M. and Abdurrachman, M.F. and Kadir, S.J.A. (2024) Reservoir porosity assessment and anomaly identification from seismic attributes using Gaussian process machine learning. Earth Science Informatics, 17 (2). pp. 1315-1327.

Rahman, A.S.A. and Masrom, S. and Rahman, R.A. and Ibrahim, R. and Gilal, A.R. (2024) Genetic Programming Based Automated Machine Learning in Classifying ESG Performances. IEEE Access, 12. pp. 59612-59629. ISSN 21693536

Rahman, H.U. and Zahid, M. and Khan, P.A. and Al-Faryan, M.A.S. and Hussainey, K. (2024) Do corporate sustainability practices mitigate earnings management? The moderating role of firm size. Business Strategy and the Environment. ISSN 09644733

Rahmawati, A.I. and Wirzal, M.D.H. and Sufian, S. and Abdul Aziz, M.S. and Salleh, M.S. and Widayatno, T. and Panjiyevich, O.S. (2024) Iron dopant in zinc oxide nanorods-based photoanode using chemical bath deposition method for photoelectrochemical water-splitting. International Journal of Hydrogen Energy, 72. pp. 422-436.

Ramadevi, B. and Kasi, V.R. and Bingi, K. (2024) Fractional ordering of activation functions for neural networks: A case study on Texas wind turbine. Engineering Applications of Artificial Intelligence, 127. ISSN 09521976

Ramadevi, B. and Kasi, V.R. and Bingi, K. (2024) Hybrid LSTM-Based Fractional-Order Neural Network for Jeju Island�s Wind Farm Power Forecasting. Fractal and Fractional, 8 (3).

Ramalingam, K. and Vellaiyan, S. and Kandasamy, M. and Chandran, D. and Raviadaran, R. (2024) An experimental study and ANN analysis of utilizing ammonia as a hydrogen carrier by real-time emulsion fuel injection to promote cleaner combustion. Results in Engineering, 21.

Ramesh, V.A. and Jarghouyeh, E.N. and Amirzali, N. and Eddie Hirawan, D. (2024) Investigation on Mechanical Properties of High Strength Ductile Engineered Geopolymer Composites (EGC). Lecture Notes in Civil Engineering, 385. pp. 337-345.

Ramesh Kumar, R. and Karthik, K. and Elumalai, P.V. and Elumalai, R. and Chandran, D. and Prakash, E. and Hassin, N. (2024) Correction to: Enhancing automotive cooling systems: composite fins and nanoparticles analysis in radiators (Scientific Reports, (2024), 14, 1, (3650), 10.1038/s41598-024-52141-0). Scientific Reports, 14 (1). ISSN 20452322

Ramesh Kumar, R. and Karthik, K. and Elumalai, P.V. and Elumalai, R. and Chandran, D. and Prakash, E. and Hassin, N. (2024) Enhancing automotive cooling systems: composite fins and nanoparticles analysis in radiators. Scientific Reports, 14 (1).

Ramkumar, M. and Nagarajan, R. and Juni, K.J. and Manobalaji, A. and Balasubramani, K. and Roy, P.D. and Kumaraswamy, K. and Fathima, A.L. and Pramod, A. and Sharveen, R. and Rahman, S.A. and Siddiqui, N.A. and Menier, D. and Sharma, R. (2024) Tectono-climatic and depositional environmental controls on the Neolithic habitation sites, Vaigai River Basin, Southern India. Geological Journal, 59 (4). pp. 1199-1218.

Ramli, M.F.M. and Takaijudin, H. and Ali, M.O.M. and Alhamzah, W.A.N. and Zubairi, N.A.A. (2024) The Effectiveness of COD Removal from Industrial Effluent Using Treatment Train System. Lecture Notes in Civil Engineering, 324. pp. 321-327.

Rao, N.R.S. and Arifin, A.M.T. and Mohammad, M. and Taib, I. and Letchumanan, S.M. (2024) Preliminary Study on Optimization Carbon Fibre Reinforced Polymer as Wrapping Structure at 90-degree Elbows Piping System via Finite Element Analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 115 (1). pp. 69-82.

Rashid, A. and Siddiqui, N.A. and Ahmed, N. and Wahid, A. and Jamil, M. and Sankoh, A.A. and Olutoki, J.O. (2024) Geochemical and mineralogical characteristics of shales from the early to middle Permian Dohol Formation in Peninsular Malaysia: Implications for organic matter enrichment, provenance, tectonic setting, palaeoweathering and paleoclimate. Heliyon, 10 (6).

Rasool, M.H. and Ahmad, M. (2024) Revolutionizing shale drilling with potassium chloride-based natural deep eutectic solvent as an additive. Journal of Petroleum Exploration and Production Technology, 14 (1). pp. 85-105.

Rasool, M.H. and Jaffari, R. and Ahmad, M. and Siddiqui, N.A. and Junejo, A.Z. and Abbas, M.A. (2024) Novel Deep Learning Framework for Efficient Pressure Zone Detection Via Analysis of Pore Pressure Profiling. Arabian Journal for Science and Engineering.

Rasul, A. and Karuppanan, S. and Perumal, V. and Ovinis, M. and Iqbal, M. (2024) An artificial neural network model for determining stress concentration factors for fatigue design of tubular T-joint under compressive loads. International Journal of Structural Integrity.

Rauf, M. and Kumar, L. and Zulkifli, S.A. and Jamil, A. (2024) Aspects of artificial intelligence in future electric vehicle technology for sustainable environmental impact. Environmental Challenges, 14. ISSN 26670100

Rawindran, H. and Alam, M.M. and Sahrin, N.T. and Raksasat, R. and Leong, W.H. and Liew, C.S. and Supramaniam, U. and Lim, J.W. and Usman, A. and Tong, W.-Y. and Suresh, S. and Khoo, K.S. (2024) Recent advancements in harnessing biodiesel from microalgae through attached growth systems. Biocatalysis and Agricultural Biotechnology, 58.

Rawindran, H. and Arif bin Hut, N. and Vrasna, D.K. and Goh, P.S. and Lim, J.W. and Liew, C.S. and Ho, C.-D. and Kang, H.-S. and Shahid, M.K. and Ng, H.-S. and Habila, M.A. and Khoo, K.S. (2024) Ultrafiltration membrane fabricated from polyethylene terephthalate plastic waste for treating microalgal wastewater and reusing for microalgal cultivation. Chemosphere, 346.

Rawindran, H. and Khoo, K.S. and Ethiraj, B. and Lim, J.W. and Liew, C.S. and Goh, P.S. and Raksasat, R. and Leong, W.H. and Rajarathinam, R. and Ng, H.-S. and Tong, W.-Y. and Alam, M.M. (2024) Environmental impact assessment via life cycle analysis on ultrafiltration membrane fabricated from polyethylene terephthalate waste to treat microalgal cultivation wastewater for reusability. Environmental Research, 251.

Rayung, M. and Ghani, N.A. and Hasanudin, N. (2024) A review on vegetable oil-based non isocyanate polyurethane: towards a greener and sustainable production route. RSC Advances, 14 (13). pp. 9273-9299. ISSN 20462069

Raza, A. and Altaf, K. and Ahmad, F. and Hussain, G. and Alkahtani, M. and wei, Hongyu (2024) Experimental study and characterisation of 316L stainless steel parts fabricated with metal fused filament fabrication. Journal of Materials Research and Technology, 30. pp. 6686-6698.

Raza Ul Mustafa, M. and Khurshid, H. and Isa, M.H. (2024) Nanoscale zero-valent iron (NZVI) intercalated MXene (Ti3C2Tx) for removal of polycyclic aromatic hydrocarbons in wastewater. Journal of Environmental Chemical Engineering, 12 (2).

Razak, S.N.A. and Shafiq, N. and Guillaumat, L. and Lohana, V.K. and Farhan, S.A. and Shafee, F.A.A. (2024) Effect of Fire on High-Strength Fly-Ash-Based Geopolymer Concrete. Lecture Notes in Civil Engineering, 324. pp. 339-349.

Redzuan, A.A.M. and Zamani, M.I.D.M. and Al-Dhahebi, A.M. and Saheed, M.S.M. (2024) Analysis of Tensile and Hardness of Empty Fruit Bunch/Chitosan Reinforced with Graphene Oxide Composite Film. Lecture Notes in Mechanical Engineering. pp. 267-274. ISSN 21954356

Rehman, A.N. and Bavoh, C.B. and Khan, M.Y. and Lal, B. (2024) Amino acid-assisted effect on hydrate-based CO2 storage in porous media with brine. RSC Advances, 14 (13). pp. 9339-9350.

Rehman, A.U. and Lal, B. (2024) RETRACTED: Gas Hydrate-Based CO2 Capture: A Journey from Batch to Continuous (Energies, (2022), 15, 21, (8309), 10.3390/en15218309). Energies, 17 (10). ISSN 19961073

Rehman, M. and Akbar, R. and Omar, M. and Gilal, A.R. (2024) A Systematic Literature Review of Ransomware Detection Methods and Tools for Mitigating Potential Attacks. Communications in Computer and Information Science, 2001 C. pp. 80-95.

Rehman, S. and Madni, A. and Jameel, Q.A. and Usman, F. and Rafi Raza, M. and Ahmad, F. and Shoukat, H. and Aali, H. and Shafiq, A. (2024) Retraction Note: Natural Polymer-Based Graphene Oxide Bio-nanocomposite Hydrogel Beads: Superstructures with Advanced Potentials for Drug Delivery (AAPS PharmSciTech, (2022), 23, 8, (304), 10.1208/s12249-022-02456-w). AAPS PharmSciTech, 25 (4). ISSN 15309932

Rehman, U. and Abbasi, A.Z. and Ting, D.H. and Hassan, M. and Khair, N. (2024) Exploring the Impact of Gamified Experiences on User Engagement in Fitness Apps: A GAMEFULQUEST Perspective. IEEE Transactions on Engineering Management, 71. pp. 3613-3628. ISSN 00189391

Remesh, S. and Loganathan, N.N. and Perumal, V. and Ovinis, M. and Karuppanan, S. and Edison, T.N.J.I. and Raja, P.B. and Ibrahim, M.N.M. and Arumugam, N. and Kumar, R.S. (2024) A high performance selectively grown nano-octahedral Mn3O4 on lignin derived laser scribed graphene for microsupercapacitor applications. Journal of Energy Storage, 77.

Riaz, N. and Khan, M.S. and Ullah, S. and Ali, A. and Bustam, M.A. and Khalid, A. and Tamang, T.L. and Khan, A. and Al-Harrasi, A. (2024) Photocatalytic mineralization of diisopropanolamine (DIPA) from natural gas industry wastewater under visible light irradiation: Response surface optimization of synthesis parameters. Results in Engineering, 21.

Ridwan, M. and Azmera, A.Z.H. and Dharmowijoyo, D.B.E. and Tanjung, L.E. (2024) The Effects of Changes in Socializing Trips, Discretionary Trips & Activities, During COVID-19 Pandemic on Affective Well-Being. Lecture Notes in Civil Engineering, 324. pp. 193-215. ISSN 23662557

Roslan, A.A. and Aziz, N.A.A. and Deraman, N.F.A. and Dzulkarnain, I. (2024) Effects of synthesis parameters on the performance of crosslinked Co-polymers with clays for conformance control. Petroleum Research, 9 (1). pp. 98-108.

Roslan, N.N. and Lau, H.L.H. and Suhaimi, N.A.A. and Shahri, N.N.M. and Verinda, S.B. and Nur, M. and Lim, J.-W. and Usman, A. (2024) Recent Advances in Advanced Oxidation Processes for Degrading Pharmaceuticals in Wastewater�A Review. Catalysts, 14 (3). ISSN 20734344

Rozaini, M.N.H. and Khoo, K.S. and Abdah, M.A.A.M. and Ethiraj, B. and Alam, M.M. and Anwar, A.F. and Yunus, N.M. and Liew, C.S. and Lim, J.W. and Ho, C.-D. and Tong, W.-Y. (2024) Potential application of 2D nano-layered MXene in analysing and remediating endocrine disruptor compounds and heavy metals in water. Environmental Geochemistry and Health, 46 (3).

Rozaini, M.T. and Grekov, D.I. and Bustam, M.A. and Pré, P. (2024) Low-Hydrophilic HKUST-1/Polymer Extrudates for the PSA Separation of CO2/CH4. Molecules (Basel, Switzerland), 29 (9). ISSN 14203049

Saad Alotaibi, B. and Waqar, A. and Radu, D. and M.Khan, A. and Dodo, Y. and Althoey, F. and Almujibah, H. (2024) Building information modeling (BIM) adoption for enhanced legal and contractual management in construction projects. Ain Shams Engineering Journal, 15 (7).

Saafie, N. and Sambudi, N.S. and Wirzal, M.D.H. and Sufian, S. (2024) Correction to: Effect of Hydrothermal Conditions on Kenaf-Based Carbon Quantum Dots Properties and Photocatalytic Degradation (Separations, (2023), 10, 2, (137), 10.3390/separations10020137). Separations, 11 (4). ISSN 22978739

Sahrin, N.T. and Ardo, F.M. and Suparmaniam, U. and Ramli, A. and Sin, J.C. and Lam, S.M. and Da Oh, W. and Chidi, B.S. and Ng, H.-S. and Shahid, M.K. and Tawfeek, A.M. and Khoo, K.S. and Lim, J.W. (2024) Enhanced microalgal hydrogen production subsisting on visible light TiO2 nanotubes photocatalyst pre-treated palm kernel expeller. International Journal of Hydrogen Energy, 54. pp. 1307-1318.

Sahrin, N.T. and Khoo, K.S. and Masri, A.N. and Rawindran, H. and Tong, W.-Y. and Altaf, M. and Sin, J.C. and Lam, S.M. and Bashir, M.J.K. and Lim, J.W. (2024) Enhancing microalgal hydrogen production via photo-fermentative modelling with alimentation derived from palm kernel expeller. International Journal of Hydrogen Energy, 72. pp. 388-394.

Saif, M.A.M. and Hussin, N. and Husin, M.M. and Muneer, A. and Alwadain, A. (2024) Beyond conventions: Unravelling perceived value's role in shaping digital-only banks' adoption. Technological Forecasting and Social Change, 203.

Sajjad, M. and Hu, A. and Alshehri, A.M. and Waqar, A. and Khan, A.M. and Bageis, A.S. and Elaraki, Y.G. and Shohan, A.A.A. and Benjeddou, O. (2024) BIM-driven energy simulation and optimization for net-zero tall buildings: sustainable construction management. Frontiers in Built Environment, 10.

Salilew, W.M. and Karim, Z.A.A. and Lemma, T.A. (2024) Variable Geometry Industrial Gas Turbine Part-Load Performance. Lecture Notes in Mechanical Engineering. pp. 191-219. ISSN 21954356

Salina Farini Bahaman, U. and Mustaffa, Z. and Ben Seghier, M.E.A. and Badri, T.M. (2024) Evaluating the reliability and integrity of composite pipelines in the oil and gas sector: A scientometric and systematic analysis. Ocean Engineering, 303.

Salleh, R. and Lohana, S. and Kumar, V. and Nooriza, S. (2024) Evaluation of job satisfaction as a mediator: Exploring the relationship between workload, career growth, social support supervisory and talent retention in the oil and gas industry in Malaysia. Extractive Industries and Society, 17. ISSN 2214790X

Salleh, R. and Mohd Sidek, L. and Abdul Rashid, R. and Basri, H. and Kumar, V. and Abd Razak, S.N. and Khalid Ali, K. and Singh, P. (2024) Socio-Economic Impact Assessment of Dam Break: A Case Study of Hulu Perak Dams in Malaysia. Lecture Notes in Civil Engineering, 353 LN. pp. 51-65.

Sallih, N. and Abdullah, N.H. and Rahim, R.H.A. and Ahmad, F. and Misnan, M.S. and Liong, L.Y. and Boon, T.T. and Siang, S.W. (2024) Shape Memory Polymers in Textile Applications�State of the Art and Future Trends. Lecture Notes in Mechanical Engineering. pp. 337-343. ISSN 21954356

Samaila, Y.A. and Sebastian, P. and Singh, N.S.S. and Shuaibu, A.N. and Ali, S.S.A. and Amosa, T.I. and Mustafa Abro, G.E. and Shuaibu, I. (2024) Video anomaly detection: A systematic review of issues and prospects. Neurocomputing, 591.

Sami, A. and Johari, K. and Hilmi, F.F. and Shamsuddin, M.R. and Mat Ghani, S.M. and Manzoor Ghumman, A.S. and Rabat, N.E. (2024) A new initiators-free technique for synthesizing stable amine-impregnated polymeric aerogel using electron beam radiation for CO2 capture. Polymer, 299.

Sami, A. and Rabat, N.E. and Johari, K. and Shamsuddin, M.R. and Ghani, S.M.M. and Ghumman, A.S.M. and Khan, M.S. (2024) Development of an amine-impregnated polymer aerogel for CO2 capture. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 690.

Saoula, O. and Abid, M.F. and Ahmad, M.J. and Shamim, A. and Patwary, A.K. and Yusr, M.M. (2024) Forging customer satisfaction through commitment-trust factors in financial insurance services: moderating role of corporate image. Journal of Islamic Marketing, 15 (2). pp. 418-445. ISSN 17590833

Sarwar, U. and Mokhtar, A.A. and Muhammad, M. and Wassan, R.K. and Soomro, A.A. and Wassan, M.A. and Kaka, S. (2024) Enhancing pipeline integrity: a comprehensive review of deep learning-enabled finite element analysis for stress corrosion cracking prediction. Engineering Applications of Computational Fluid Mechanics, 18 (1).

Sarwar, U. and Muhammad, M. and Mokhtar, A.A. and Khan, R. and Behrani, P. and Kaka, S. (2024) Hybrid intelligence for enhanced fault detection and diagnosis for industrial gas turbine engine. Results in Engineering, 21.

Selvanathan, S. and Meng Woi, P. and Selvanathan, V. and Karim, M.R. and Sopian, K. and Akhtaruzzaman, M. (2024) Transition Metals-Based Water Splitting Electrocatalysts on Copper-Based Substrates: The Integral Role of Morphological Properties. Chemical Record, 24 (1).

Selvaraj, G. and Wilfred, C.D. (2024) CO2/CH4 Separation in Amino Acid Ionic Liquids, Polymerized Ionic Liquids, and Mixed Matrix Membranes. Molecules, 29 (6).

Shabina and Ali, R.F. and Jahankhani, H. and Siddiqi, Y. and Hassan, B. (2024) Ensuring Securing PII Data in the AWS Cloud: A Comprehensive Guide to PCI DSS Compliance. Advanced Sciences and Technologies for Security Applications, Part F. pp. 185-216. ISSN 16135113

Shah, S.A.A. and Shahzad, A. and Alhussein, M. and Goh, C.M. and Aurangzeb, K. and Tang, T.B. and Awais, M. (2024) An Implementation of Multiscale Line Detection and Mathematical Morphology for Efficient and Precise Blood Vessel Segmentation in Fundus Images. Computers, Materials and Continua, 79 (2). pp. 2565-2583.

Shah, S.Q.A. and Lai, F.W. and Tahir, M. and Shad, M.K. and Hamad, S. and Ali, S.E.A. (2024) Intellectual capital and financial performance: does board size and independent directors matter? An empirical enquiry. Journal of Islamic Accounting and Business Research. ISSN 17590817

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Sharif, T. and Sajid, Z. and Hussnain, S.M. and Choudhry, R.S. (2024) Bearing performance and damage characteristics of rein-infused thermoplastic 3D woven composites bolted joints. Polymer Composites, 45 (1). pp. 631-652.

Shaik, N.B. and Jongkittinarukorn, K. and Benjapolakul, W. and Bingi, K. (2024) A novel neural network-based framework to estimate oil and gas pipelines life with missing input parameters. Scientific Reports, 14 (1).

Shaikh, M.S. and Raj, S. and Abdul Latif, S. and Mbasso, W.F. and Kamel, S. (2024) Optimizing transmission line parameter estimation with hybrid evolutionary techniques. IET Generation, Transmission and Distribution, 18 (9). pp. 1795-1814. ISSN 17518687

Shalfoh, E. and Ahmad, M.I. and Binhweel, F. and Shaah, M.A. and Senusi, W. and Hossain, M.S. and Alsaadi, S. (2024) Fish waste oil extraction using supercritical CO2 extraction for biodiesel production: Mathematical, and kinetic modeling. Renewable Energy, 220.

Shamim, A. and Abid, M.F. and Ahmad, F. (2024) S�O�R based experiential framework for measuring in-store customer satisfaction in non-fuel retailing. Journal of Retailing and Consumer Services, 77.

Shams, M.A. and Bheel, N. and Ali, M. and Ahmad, M. and Najeh, T. and Gamil, Y. and Almujibah, H.R. and Benjeddou, O. (2024) Fracture analysis of steel fibre-reinforced concrete using Finite element method modeling. Frontiers in Materials, 11.

Shamsuri, N.A. and Hamsan, M.H. and Shukur, M.F. and Alias, Y. and Halim, S.N.A. and Aziz, S.B. and Jahidin, A.H. and Sulaiman, M. and Yuwana, L. and Siong, S.O.J. and Sarih, N.M. and Kadir, M.F.Z. (2024) Enhancing EDLC applications with BMIMBF4-integrated cellulose gel electrolyte for sustainable energy storage. Journal of Energy Storage, 75.

Shar, M.A. and Muhammad, M.B. and Mokhtar, A.A.B. and Soomro, M. (2024) Energy Efficiency Performance Optimization and Surge Prediction of Centrifugal Gas Compressor. Lecture Notes in Electrical Engineering, 1123 L. pp. 61-68.

Shar, M.A. and Muhammad, M.B. and Mokhtar, A.A.B. and Soomro, M. (2024) A Novel Energy Performance-Based Diagnostic Model for Centrifugal Compressor using Hybrid ML Model. Arabian Journal for Science and Engineering. ISSN 2193567X

Sharaf-Addin, H.H.H. (2024) Carbon Management Accounting System and Corporate Environmental Performance: A Conceptual Framework. International Journal of Energy Economics and Policy, 14 (2). pp. 304-310. ISSN 21464553

Sharma, G. and Bhushan, S. and Manna, A. and Kolpe, K.J. (2024) Identify the Economic Crisis by Analyzing Banking Data Using Machine Learning Technique. International Journal of Intelligent Systems and Applications in Engineering, 12 (5s). pp. 503-512. ISSN 21476799

Sherugar, P. and Antony, A.M. and Nordin, N.A.H.M. and Patil, S.A. and Padaki, M. (2024) Tailoring the CH4/CO2/N2 separation performance of ultrapermeable polymeric composite membranes by altering the concentration of Pd/g-C3N4. Fuel, 361.

Shi, L. and Cheong, Y.H. and Lai, L.S. and Yeap, S.P. and Yeong, Y.F. (2024) Review on the Role of Nanomaterials in Membrane Fabrication via Additive Manufacturing for Gas Separation. Current Nanomaterials, 9 (1). pp. 41-54.

Shokrollahi, F. and Keong Lau, K. and Partoon, B. and Sze Lai, L. (2024) Parametric quantification of sonochemical effect during the high frequency ultrasonic-assisted absorption of bulk CO2. Separation and Purification Technology, 331.

Shukla, S. and Hussain, S. and Irshad, R.R. and Alattab, A.A. and Thakur, S. and Breslin, J.G. and Hassan, M.F. and Abimannan, S. and Husain, S. and Jameel, S.M. (2024) Network analysis in a peer-to-peer energy trading model using blockchain and machine learning. Computer Standards and Interfaces, 88.

Sikiru, S. and Abioye, K.J. and Adedayo, H.B. and Adebukola, S.Y. and Soleimani, H. and Anar, M. (2024) Technology projection in biofuel production using agricultural waste materials as a source of energy sustainability: A comprehensive review. Renewable and Sustainable Energy Reviews, 200.

Sikiru, S. and Al-Yaseri, A. and Yekeen, N. and Soleimani, H. and N, B.N. and Hamza, M.F. and Ghotbi, M.Y. (2024) H2-quartz and cushion gas-quartz intermolecular interactions: implications for hydrogen geo-storage in sandstone reservoirs. Adsorption. ISSN 09295607

Sikiru, S. and Oladosu, T.L. and Amosa, T.I. and Olutoki, J.O. and Ansari, M.N.M. and Abioye, K.J. and Rehman, Z.U. and Soleimani, H. (2024) Hydrogen-powered horizons: Transformative technologies in clean energy generation, distribution, and storage for sustainable innovation. International Journal of Hydrogen Energy, 56. pp. 1152-1182.

Sikiru, S. and Soleimani, H. and Rostami, A. and Hamza, M.F. and Afolabi, L.O. (2024) Analysis of CH4 and H2 Adsorption on Heterogeneous Shale Surfaces Using a Molecular Dynamics Approach. Fluid Dynamics and Materials Processing, 20 (1). pp. 31-44.

Silverio, A.A. and Ho, E.T.W. and Ang, J. and Esguerra, K. (2024) Wearable microfluidic sweat collection platform with a calorimetric flow rate sensor for realtime and long-term sweat rate measurements. Journal of Micromechanics and Microengineering, 34 (3).

Sim, M.S. and You, K.Y. and Dewan, R. and Esa, F. and Salim, M.R. and Khe, C.S. and Kew, S.Y.N. and Hamid, F. (2024) Microwave sensors loaded with metamaterial-inspired resonators for dielectric material characterization: A review. Sensors and Actuators A: Physical, 372.

Sin, J.-C. and Lam, S.-M. and Zeng, H. and Lin, H. and Li, H. and Huang, L. and Liaw, S.-J. and Mohamed, A.R. and Lim, J.-W. (2024) Integrating BaFe2O4 nanoparticles onto N-doped Bi2WO6 microspheres for eminent visible light-driven photocatalytic performance towards aquaculture contaminants and pathogens. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 692.

Sin, J.-C. and Lam, S.-M. and Zeng, H. and Lin, H. and Li, H. and Huang, L. and Liaw, S.-J. and Mohamed, A.R. and Lim, J.-W. and Dong, K. and Qin, Z. (2024) Design and synthesis of Fe2WO6/Eu-doped BiOBr nanocomposite: A novel 0D/2D Z-scheme heterojunction system for simultaneous boosted visible-light driven photocatalytic bisphenol A degradation and Cr(VI) reduction. Ceramics International, 50 (3). pp. 5372-5383.

Singa, P.K. and Rajamohan, N. and Isa, M.H. and Azner Abidin, C.Z. and Ibrahim, A.H. (2024) Remediation of carcinogenic PAHs from landfill leachate by Electro-Fenton process � Optimization and modeling. Chemosphere, 359.

Singh, N. and Kumar, J. and Singh, A.K. and Mohan, A. (2024) Privacy-preserving multi-keyword hybrid search over encrypted data in cloud. Journal of Ambient Intelligence and Humanized Computing, 15 (1). pp. 261-274. ISSN 18685137

Siyal, A.A. and Radin Mohamed, R.M.S. and Shamsuddin, R. and Ridzuan, M.B. (2024) A comprehensive review of synthesis kinetics and formation mechanism of geopolymers. RSC Advances, 14 (1). pp. 446-462.

Sohail, M. and Pao, W. and Azam, H. and Khan, U. (2024) Two-phase Upward Flow-Induced Vibrations in U-bend under Different Orientations. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 114 (1). pp. 1-12.

Sohail, M. and Pao, W. and Othman, A.R. and Azam, H. and Khan, M.R. (2024) Regression-based prediction of flow-induced dominant vibrational frequencies in two-phase flow regimes. Ocean Engineering, 307.

Soleimani, H. and Sikiru, S. and Abbas, Z. and Soleimani, H. and Kumar, N. and Rotami, A. (2024) Exploring moisture content measurement using an open-ended coaxial sensor: A method of moments approach. Sensors and Actuators A: Physical, 367. ISSN 09244247

Soni, A. and Das, P.K. and Yusuf, M. and Ridha, S. and Kamyab, H. and Chelliapan, S. and Kirpichnikova, I. and Mussa, Z.H. (2024) Valorization of Post-Consumers Plastics and Agro-Waste in Sustainable Polymeric Composites for Tribological Applications. Waste and Biomass Valorization, 15 (3). pp. 1739-1755. ISSN 18772641

Soomro, M. and Lemma, T.A. and Gilani, S.I.U.-H. and Shar, M.A. (2024) Optimized Design Point Model of SGT500 Using GasTurb 14. Lecture Notes in Electrical Engineering, 1123 L. pp. 77-83.

Subramani, I.G. and Remesh, S. and Perumal, V. and Gopinath, S.C.B. and Karuppanan, S. and Raja, P.B. and Ovinis, M. and Arumugam, N. and Kumar, R.S. (2024) Flexible laser-induced graphene electrodes on polyimide film: Hybrid nanoflower-modified dielectric microjunctions for non-faradaic analysis. Biochemical Engineering Journal, 208.

Subramanian, J.A. and Asirvadam, V.S. and Zulkifli, S.A.B.M. and Lagisetty, R.K. and Shanthi, N. (2024) AAV Landing Area 3-D Reconstruction Using Photogrammetric Approach. IEEE Sensors Letters, 8 (4). pp. 1-4. ISSN 24751472

Subramanian, J.A. and Asirvadam, V.S. and Zulkifli, S.A.B.M. and Singh, N.S.S. and Shanthi, N. and Lagisetty, R.K. and Kadir, K.A. (2024) Integrating Computer Vision and Photogrammetry for Autonomous Aerial Vehicle Landing in Static Environment. IEEE Access, 12. pp. 4532-4543. ISSN 21693536

Suhaimi, N.A.A. and Umar, M.K.H. and Lau, H.L.H. and Roslan, N.N. and Lim, J.-W. and Hobley, J. and Nur, M. and Usman, A. (2024) An insight into the photocatalytic degradation of the antibiotic rifampicin by titanium dioxide nanoparticles in aqueous solution under UV light irradiation. Reaction Kinetics, Mechanisms and Catalysis, 137 (2). pp. 1105-1123.

Sulistyorini, R. and Abdi, N.S. and Dharmowijoyo, D.B.E. and EviantiTanjung, L. (2024) Effects of Change of Discretionary Trips & Activities, During COVID-19 Pandemic Towards Social & Mental Health. Lecture Notes in Civil Engineering, 324. pp. 429-448. ISSN 23662557

Sultan, N.M. and Badri Albarody, T.M. and Baharom, M. and Al-Jothery, H.K.M. and Mohammed, H.G. (2024) Experimental Investigation of Magnetic Properties of β-SiC Nanoparticle at Room Temperature. Journal of Advanced Research in Applied Sciences and Engineering Technology, 35 (1). pp. 173-180.

Sultan, S.M. and Chih Ping, T. and Sobayel, K. and Abdullah, M.Z. and Sopian, K. (2024) Optimization of the Assessment Method for Photovoltaic Module Enhancers: A Cost-Efficient Economic Approach Developed through Modified Area and Cost Factor. Processes, 12 (5).

Sultan, S.M. and Tso, C.P. and Ajeel, R.K. and Sobayel, K. and Abdullah, M.Z. and Sopian, K. and Al Busaidi, A.S. (2024) Revolutionizing photovoltaic excellence: Unveiling a cutting-edge approach to assessing module enhancers for optimal area and cost efficiency. Case Studies in Thermal Engineering, 55. ISSN 2214157X

Sumiea, E.H. and Abdulkadir, S.J. and Alhussian, H.S. and Al-Selwi, S.M. and Alqushaibi, A. and Ragab, M.G. and Fati, S.M. (2024) Deep deterministic policy gradient algorithm: A systematic review. Heliyon, 10 (9).

Sun, P. and Tayeh, B.A. and Alaloul, W.S. and Abu Aisheh, Y.I. and Frijah, M.M. (2024) The role of client in fostering construction safety during the planning and design stages. Journal of Asian Architecture and Building Engineering. ISSN 13467581

Suparmaniam, U. and Lam, M.K. and Lim, J.W. and Rawindran, H. and Ho, Y.C. and Tan, I.S. and Kansedo, J. and Lim, S. and Cheng, Y.W. and Raza Naqvi, S. (2024) Enhancing high-density microalgae cultivation via exogenous supplementation of biostimulant derived from onion peel waste for sustainable biodiesel production. Journal of Environmental Management, 359.

Suparmaniam, U. and Lam, M.K. and Lim, J.W. and Tan, I.S. and Chin, B.L.F. and Shuit, S.H. and Lim, S. and Pang, Y.L. and Kiew, P.L. (2024) Abiotic stress as a dynamic strategy for enhancing high value phytochemicals in microalgae: Critical insights, challenges and future prospects. Biotechnology Advances, 70.

Suryawan, I.W.K. and Septiariva, I.Y. and Widanarko, D.U.F. and Qonitan, F.D. and Sarwono, A. and Sari, M.M. and Prayogo, W. and Arifianingsih, N.N. and Suhardono, S. and Lim, J.-W. (2024) Enhancing energy recovery from Wastewater Treatment Plant sludge through carbonization. Energy Nexus, 14. ISSN 27724271

Syuhada, S. and Al Salaheen, M. and Alaloul, W.S. and Alzubi, K.M. (2024) Mechanical Performance Improvement by Carbon Dioxide Curing of Cement Concrete Incorporating Oil Shale Residue. Lecture Notes in Civil Engineering, 324. pp. 41-50.

T, A. and G, G. and P, A.M.D. and Assaad, M. (2024) Machine learning algorithm for ventilator mode selection, pressure and volume control. PloS one, 19 (3). e0299653. ISSN 19326203

Tabrez, M. and Ali Pasha, A. and Azeem Khan, W. and Hussain, I. and Ali, M. and Algarni, S. and Alqahtani, T. and Kareem, M.W. (2024) Bioconvection analysis for convectively heated radiative flow of Sutterby fluid involving efficacy of ferromagnetic nanoparticles. Thermal Science and Engineering Progress, 48.

Tackie-Otoo, B.N. and Haq, M.B. (2024) A comprehensive review on geo-storage of H2 in salt caverns: Prospect and research advances. Fuel, 356.

Tackie-Otoo, B.N. and Otchere, D.A. and Latiff, A.H.A. and Ayoub Mohammed, M.A. and Hassan, A.M. (2024) Evaluation of the Oil Recovery Potential and Cost Implication Analysis of Alternative ASP Formulations for Sandstone and Carbonate Reservoirs. ACS Omega, 9 (19). pp. 20859-20875.

Tan, A.S. and Tan, J.C. and Ean, L.W. and Ng, C.Y. and Mohammed, B.S. and Norhisham, S. (2024) Review of Rubber-Based Waste in Compressed Bricks. Lecture Notes in Civil Engineering, 324. pp. 233-241.

Tan, W.-N. and Samling, B.A. and Tong, W.-Y. and Chear, N.J.-Y. and Yusof, S.R. and Lim, J.-W. and Tchamgoue, J. and Leong, C.-R. and Ramanathan, S. (2024) Chitosan-Based Nanoencapsulated Essential Oils: Potential Leads against Breast Cancer Cells in Preclinical Studies. Polymers, 16 (4).

Tan, Y.L. and Tan, I.S. and Foo, H.C.Y. and Kansedo, J. and Lam, M.K. and Lim, S. and Show, P.L. and Wong, M.K. (2024) Biorefinery-based sustainability assessment of macroalgae waste valorization to polylactic acid: Exergy and exergoeconomic perspectives. Biochemical Engineering Journal, 204.

Tariq, A. and Ahmed, S.W. and Bin Baharom, M. and Altaf, K. and Hussain, G. and Jamil, A. and Mohammed, S.E. and Ali, H.M. (2024) An investigation of thermal and hydrodynamic behaviour of compound fins under turbulent flow conditions: A numerical and experimental approach. Alexandria Engineering Journal, 89. pp. 149-171.

Tarjo, T. and Anggono, A. and Zakik, Z. and Nordin, S.M. and Priyadi, U. (2024) The impact of Islamic of corporate social responsibility on social welfare with financial fraud as moderating: study in Indonesia. Journal of Financial Crime. ISSN 13590790

Teh, C.J.Q. and Drieberg, M. and Hasan, K.N.M. and Shah, A.L. and Ahmad, R. (2024) Indoor PV Modeling Based on the One-Diode Model. Applied Sciences (Switzerland), 14 (1).

Thamizharasan, A. and Rajaguru, V.R.R. and Gajalakshmi, S. and Lim, J.W. and Greff, B. and Rajagopal, R. and Chang, S.W. and Ravindran, B. and Awasthi, M.K. (2024) Investigation on the physico-chemical properties of soil and mineralization of three selected tropical tree leaf litter. Environmental Research, 243.

Thansirichaisree, P. and Mohamad, H. and Ejaz, A. and Saingam, P. and Hussain, Q. and Suparp, S. (2024) Stress-strain behavior of square concrete columns confined with hybrid B-CSM composites and development of novel prediction models. Composites Part C: Open Access, 14.

Thansirichaisree, P. and Mohamad, H. and Zhou, M. and Ejaz, A. and Saingam, P. and Hussain, Q. and Joyklad, P. (2024) Hybrid B-CSM Composites Strengthening Approach for Improved Stress�Strain Behavior of Concrete Columns and Development of Analytical Models. Arabian Journal for Science and Engineering.

Tjokorda and Justtin, J.R. and Dharmowijoyo, D.B.E. and Kresnanto, N.C. and Tanjung, L.E. (2024) The Comparison of the Effect of Activity Space on Health Performance (Physical and Mental Health) Between Malaysia City and Indonesia City. Lecture Notes in Civil Engineering, 324. pp. 775-794. ISSN 23662557

Tong, K.T.X. and Tan, I.S. and Foo, H.C.Y. and Lam, M.K. and Lim, S. and Lee, K.T. (2024) Advancement of biorefinery-derived platform chemicals from macroalgae: a perspective for bioethanol and lactic acid. Biomass Conversion and Biorefinery, 14 (2). pp. 1443-1479.

Tukkee, A.M. and Al-Kayiem, H.H. and Gilani, S.I.U. (2024) Assessment of the Turbine Location for Optimum Performance of the Solar Vortex Engine as a Replacement to the Tall Chimney Solar Updraft Power Plant Design. Journal of Applied and Computational Mechanics, 10 (1). pp. 38-54.

Turkson, J.N. and Md Yusof, M.A. and Fjelde, I. and Sokama-Neuyam, Y.A. and Darkwah-Owusu, V. and Tackie-Otoo, B.N. and Adenutsi, C.D. and Amoyaw, B. and Hyun, L.J. and Kwon, S. (2024) Carbonated Water Injection for Enhanced Oil Recovery and CO2 Geosequestration in Different CO2 Repositories: A Review of Physicochemical Processes and Recent Advances. Energy and Fuels, 38 (8). pp. 6579-6612.

Tusher, H.M. and Nazir, S. and Mallam, S. and Yang, Z. and Asgher, U. and Rusli, R. (2024) Exploring the effects of automation malfunction on team communication and coordination in ships' engine rooms. Process Safety Progress, 43 (S1). S50-S62.

Udeze, O.J. and Mohammed, B.S. and Adebanjo, A.U. and Abdulkadir, I. (2024) Optimizing an eco-friendly high-density concrete for offshore applications: A study on fly ash partial replacement and graphene oxide nano reinforcement. Case Studies in Chemical and Environmental Engineering, 9.

Ul Mustafa, M.R. and Khurshid, H. and Ho, Y.-C. and Isa, M.H. (2024) Removal of Naphthalene from Produced Water Using Oil Palm Leaves Waste Activated Carbon. Lecture Notes in Civil Engineering, 324. pp. 155-164.

Ullah, A. and Sakidin, H. and Gul, S. and Shah, K. and Hamed, Y. and Abdeljawad, T. (2024) Mathematical model with sensitivity analysis and control strategies for marijuana consumption. Partial Differential Equations in Applied Mathematics, 10.

Ullah, A. and Sakidin, H. and Shah, K. and Hamed, Y. and Abdeljawad, T. (2024) A mathematical model with control strategies for marijuana smoking prevention. Electronic Research Archive, 32 (4). pp. 2342-2362. ISSN 26881594

Ullah, F. and Ullah, A. (2024) Networking and Security Architectures for IoE Networks. Internet of Things, Part F. pp. 89-107. ISSN 21991073

Ullah, R. and Hasan, M.H.B. and Khan, S.D. and Rahim, M.A. (2024) Secure Transmission of Compressed Medical Image Sequences on Communication Networks Using Motion Vector Watermarking. Computers, Materials and Continua, 78 (3). pp. 3283-3301.

Umer, A. and Ali, M. and Jehangiri, A.I. and Bilal, M. and Shuja, J. (2024) Multi-Objective Task-Aware Offloading and Scheduling Framework for Internet of Things Logistics. Sensors, 24 (8).

Usman, A. and Khan, H. and Tariq, R. and Atta, M.S. and Rehman, A. and Iqbal, M.M. (2024) Sustainable water solutions:a Six Sigma approach to membrane-based filtration system design. Frontiers in Environmental Science, 12.

Usman, M. and Zulkefli, F.S.E. and Wirzal, M.D.H. and Hizam, S.M. and Nor Zaidi, A.N. and Saad, M.S. (2024) Modified carbon paste electrode with choline proline in enhancing the performance of water electrolysis system for hydrogen production. Fuel, 358.

Usman-Hamza, F.E. and Balogun, A.O. and Amosa, R.T. and Capretz, L.F. and Mojeed, H.A. and Salihu, S.A. and Akintola, A.G. and Mabayoje, M.A. (2024) Sampling-based novel heterogeneous multi-layer stacking ensemble method for telecom customer churn prediction. Scientific African, 24.

Usman-Hamza, F.E. and Balogun, A.O. and Nasiru, S.K. and Capretz, L.F. and Mojeed, H.A. and Salihu, S.A. and Akintola, A.G. and Mabayoje, M.A. and Awotunde, J.B. (2024) Empirical analysis of tree-based classification models for customer churn prediction. Scientific African, 23. ISSN 24682276

Usmani, M. and Memon, Z.A. and Danyaro, K.U. and Qureshi, R. (2024) Optimized Multi-Level Multi-Type Ensemble (OMME) Forecasting Model for Univariate Time Series. IEEE Access, 12. pp. 35700-35715. ISSN 21693536

Usmani, U.A. and Happonen, A. and Watada, J. (2024) ERP Integration: Enhancing Collaboration in Virtual and Extended Enterprises. Lecture Notes in Networks and Systems, 828. pp. 161-178. ISSN 23673370

Usmani, U.A. and Happonen, A. and Watada, J. (2024) Enhancing Medical Diagnosis Through Deep Learning and Machine Learning Approaches in Image Analysis. Lecture Notes in Networks and Systems, 825. pp. 449-468.

Vandrangi, S.K. and Lemma, T.A. and Muhammad Mujtaba, S. (2024) Adaptive thresholds-based leak detection using real-time transient modeling of two-phase flows. Process Safety Progress, 43 (S1). S150-S160.

Vandrangi, S.K. and Lemma, T.A. and Mujtaba, S.M. (2024) Transient Modeling of Two-Phase Flows Using OLGA. Lecture Notes in Mechanical Engineering. pp. 109-121. ISSN 21954356

Vats, S. and Sharma, V. and Singh, K. and Katti, A. and Mohd Ariffin, M. and Nazir Ahmad, M. and Ahmadian, A. and Salahshour, S. (2024) Incremental learning-based cascaded model for detection and localization of tuberculosis from chest x-ray images. Expert Systems with Applications, 238. ISSN 09574174

Vellaiyan, S. and Chandran, D. and Venkatachalam, R. and Ramalingam, K. and Rao, R. and Raviadaran, R. (2024) Maximizing waste plastic oil yield and enhancing energy and environmental metrics through pyrolysis process optimization and fuel modification. Results in Engineering, 22.

Vellaiyan, S. and Kandasamy, M. and Chandran, D. and Raviadaran, R. and Ramalingam, K. and Devarajan, Y. (2024) Characterization and optimization of waste-derived biodiesel utilizing CNT/MgO nanocomposite and water emulsion for enhanced performance and emission metrics. Case Studies in Thermal Engineering, 55.

Venkateshwaran, B. and Ramkumar, M. and Siddiqui, N.A. and Haque, A.K.M.E. and Sugavanam, G. and Manobalaji, A. (2024) A Graph Convolutional Network Approach to Qualitative Classification of Hydrocarbon Zones Using Petrophysical Properties in Well Logs. Natural Resources Research, 33 (2). pp. 637-664.

Vijaya Kumar, S.D. and Karuppanan, S. and Perumal, V. and Ovinis, M. (2024) Failure pressure prediction of high-strength steel pipe bend considering pipe and corrosion geometry. Discover Applied Sciences, 6 (4).

Vinod, M. and Kishan, D. and Kannan, R. and Iqbal, A. and Mohammed Sulthan, S. (2024) Primary side control strategies for battery charging regulation in wireless power transfer systems for EV applications. IET Power Electronics.

Vorathin, E. and Choong, M.X. and Mohammad, M. and Othman, A.R. and Ismail, A.R. (2024) Low pressure pipeline leak localization using highly sensitive rubber-based diaphragm FBG pressure sensors and NPW method. Optical Fiber Technology, 83.

Vorathin, E. and Khairuddin, R. and Maryam, S. and Mohammad, M. and Othman, A.R. and Ismail, A.R. (2024) Improved pressure sensitivity prediction of a rubber-based diaphragm FBG pressure sensor using theoretical model and finite element analysis. International Journal of Adhesion and Adhesives, 132.

Vrasna, D.K. and Goh, P.S. and Ahmad, N.A. and Gonzales, R.R. and Wong, K.C. and Lim, J.W. and Lau, W.J. and Othman, M.H.D. and Ismail, A.F. and Matsuyama, H. (2024) Thin film nanocomposite forward osmosis membrane with exfoliated layered double hydroxide nanosheets embedded support for fouling-resistant microalgae dewatering. Journal of Water Process Engineering, 58.

Waqar, A. (2024) Evaluation of factors causing lateral migration of light non-aqueous phase liquids (LNAPLs) in onshore oil spill accidents. Environmental Science and Pollution Research, 31 (7). pp. 10853-10873. ISSN 09441344

Waqar, A. (2024) Intelligent decision support systems in construction engineering: An artificial intelligence and machine learning approaches. Expert Systems with Applications, 249. ISSN 09574174

Waqar, A. and Bheel, N. and Tayeh, B.A. (2024) Modeling the effect of implementation of artificial intelligence powered image analysis and pattern recognition algorithms in concrete industry. Developments in the Built Environment, 17. ISSN 26661659

Waqar, A. and Hannan Qureshi, A. and Othman, I. and Saad, N. and Azab, M. (2024) Exploration of challenges to deployment of blockchain in small construction projects. Ain Shams Engineering Journal, 15 (2). ISSN 20904479

Waqar, A. and Houda, M. and Khan, A.M. and Khan, M.B. and Khan Raja, B.N. and Elmazi, G. (2024) Limitations to the BIM-based safety management practices in residential construction project. Environmental Challenges, 14. ISSN 26670100

Waqar, A. and Houda, M. and Khan, A.M. and Qureshi, A.H. and Elmazi, G. (2024) Sustainable leadership practices in construction: Building a resilient society. Environmental Challenges, 14. ISSN 26670100

Waqar, A. and Khan, M.B. and Afzal, M.T. and Radu, D. and G�l�ţanu, T. and Cazacu, C.E. and Dodo, Y. and Althoey, F. and Almujibah, H.R. (2024) Investigating the synergistic effects of carbon fiber and silica fume on concrete strength and eco-efficiency. Case Studies in Construction Materials, 20.

Waqar, A. and Mateen Khan, A. and Othman, I. (2024) Blockchain empowerment in construction supply chains: Enhancing efficiency and sustainability for an infrastructure development. Journal of Infrastructure Intelligence and Resilience, 3 (1).

Waqar, A. and Othman, I. and Almujibah, H. and Hayat, S. (2024) Implementing building information modeling (BIM) for the success of geotechnical offshore construction projects: malaysian construction industry. Quality and Quantity, 58 (2). pp. 1945-1970. ISSN 00335177

Waqar, A. and Othman, I. and Almujibah, H.R. and Sajjad, M. and Deifalla, A. and Shafiq, N. and Azab, M. and Qureshi, A.H. (2024) Overcoming implementation barriers in 3D printing for gaining positive influence considering PEST environment. Ain Shams Engineering Journal, 15 (3).

Waqar, A. and Othman, I. and Shafiq, N. and Mansoor, M.S. (2024) Evaluating the critical safety factors causing accidents in downstream oil and gas construction projects in Malaysia. Ain Shams Engineering Journal, 15 (1).

Waqar, A. and Shafiq, N. and Bheel, N. and Benjeddou, O. and Hamah Sor, N. and Hu, J.W. and Najm, H.M. and Almujibah, H.R. (2024) Modeling of success factors of using PU coats in concrete construction projects. Heliyon, 10 (7).

Waqar, A. and Shafiq, N. and Othman, I. and Alqahtani, F.K. and Alshehri, A.M. and Sherif, M.A. and Almujibah, H.R. (2024) Examining the impact of BIM implementation on external environment of AEC industry: A PEST analysis perspective. Developments in the Built Environment, 17.

Waqar, A. and Shafiq, N. and Othman, I. and Alsulamy, S.H. and Alshehri, A.M. and Falqi, I.I. (2024) Deterrents to the IoT for smart buildings and infrastructure development: A partial least square modeling approach. Heliyon, 10 (10).

Waqas, S. and Harun, N.Y. and Arshad, U. and Laziz, A.M. and Sow Mun, S.L. and Bilad, M.R. and Nordin, N.A.H. and Alsaadi, A.S. (2024) Optimization of operational parameters using RSM, ANN, and SVM in membrane integrated with rotating biological contactor. Chemosphere, 349.

Waqas, S. and Harun, N.Y. and Lock, S.S.M. and Alsaadi, A.S. (2024) Energy-efficient single-stage membrane rotating biological contactor for wastewater treatment. Bioresource Technology Reports, 25.

Wicaksono, A. and Dharmowijoyo, D.B.E. and Tanjung, L.E. and Susilo, Y.O. (2024) The reciprocal effects of physical activities and ride-sourcing on health. International Journal of Sustainable Transportation, 18 (1). pp. 15-33.

Wicaksono, A. and Munir, A. and Dharmowijoyo, D.B.E. and Hartieni, P. (2024) The effects of daily spatiotemporal variables and physical activities at workplaces on physical and mental health. Cogent Engineering, 11 (1). ISSN 23311916

Wijaya, B. and Apriandanu, D.O.B. and Surya, R.M. and Yulizar, Y. and Sambudi, N.S. and Khalil, M. and Umar, A. (2024) Synthesis of novel TiO2/CeFeO3 heterojunction using Mugwort (Artemisia vulgaris) leaves extracts with enhanced photocatalytic activity under visible light irradiation. Applied Surface Science Advances, 21. ISSN 26665239

Yadav, A.K. and Singh, K. and Arshad, N.I. and Ferrara, M. and Ahmadian, A. and Mesalam, Y.I. (2024) MADM-based network selection and handover management in heterogeneous network: A comprehensive comparative analysis. Results in Engineering, 21.

Yahya, M.S. and Soeung, S. and Chinda, F.E. and Musa, U. and Yunusa, Z. (2024) Dual-band GPS/LoRa antenna for internet of thing applications. Bulletin of Electrical Engineering and Informatics, 13 (2). pp. 986-995.

Yahya, M.S. and Soeung, S. and Rahim, S.K.A. and Musa, U. and Ba Hashwan, S.S. and Haque, M.A. (2024) Machine Learning-Optimized Compact Frequency Reconfigurable Antenna With RSSI Enhancement for Long-Range Applications. IEEE Access, 12. pp. 10970-10987. ISSN 21693536

Yan, X. and Chen, P.-S. and Mohammed, B.S. and Liu, B. (2024) Effect of Hollow Bodies on the Strength and Density of Bubble Concrete. Lecture Notes in Civil Engineering, 385. pp. 133-149. ISSN 23662557

Yang, F. and Ismail, N.A. and Pang, Y.Y. and Kebande, V.R. and Al-Dhaqm, A. and Koh, T.W. (2024) A Systematic Literature Review of Deep Learning Approaches for Sketch-Based Image Retrieval: Datasets, Metrics, and Future Directions. IEEE Access, 12. pp. 14847-14869. ISSN 21693536

Yang, P.B. and Chan, Y.J. and Yazdi, S.K. and Lim, J.W. (2024) Optimisation and economic analysis of industrial-scale anaerobic co-digestion (ACoD) of palm oil mill effluent (POME) and decanter cake (DC) using machine learning models: A comparative study of Gradient Boosting Machines (GBM), K-nearest neighbours (KNN), and random forest (RF). Journal of Water Process Engineering, 58.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2024) Feasibility Evaluation of Waste Palm Oil Clinker Powder as a Fillers Substitute for Eco-Friendly Hot Mix Asphalt Pavement. International Journal of Pavement Research and Technology, 17 (2). pp. 446-459.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2024) Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures. International Journal of Pavement Research and Technology, 17 (1). pp. 123-150. ISSN 19966814

Yat, Y.D. and Foo, H.C.Y. and Tan, I.S. and Lam, M.K. and Show, P.L. and Ng, B.W.L. (2024) Synthesis of carbon quantum dots via electrochemically-induced carbon dioxide nanobubbles exfoliation of graphite for heavy metal detection in wastewater. Journal of Environmental Chemical Engineering, 12 (3).

Yazsid, A.Z.S.M. and Kumar, K. and Zulkifli, S.A.M. (2024) Investigation of Range Extension of Personal Electric Mobility by Current-Limiting Mechanism. Lecture Notes in Mechanical Engineering. pp. 161-175. ISSN 21954356

Yeganeh Ghotbi, M. and Sikiru, S. and Rajabi, A. and Soleimani, H. and Kou, L. and Ansari, M.N.M. and Ramachandaramurthy, V.K. (2024) ZnO/ZnS/Carbon Nanocomposite-Derived Sulfur-Doped carbon nanosheets using a layered nanoreactor: Towards advanced supercapacitor electrodes and devices. Chemical Engineering Journal, 485.

Yong, Z.-J. and Lam, S.-M. and Sin, J.-C. and Mohamed, A.R. and Zeng, H. and Li, H. and Lin, H. and Huang, L. and Lim, J.-W. (2024) Incorporating photocatalytic fuel cell with dual S-scheme CuBi2O4/Bi2WO6/ZnO NRA photoanode for energy recuperation from municipal wastewater treatment under sunlight. Journal of Environmental Chemical Engineering, 12 (1).

Yong, Z.C. and Yew, M.K. and Yew, M.C. and Beh, J.H. and Lee, F.W. and Lim, S.K. and Saw, L.H. (2024) Utilizing bio-based and industrial waste aggregates to improve mechanical properties and thermal insulation in lightweight foamed macro polypropylene fibre-reinforced concrete. Journal of Building Engineering, 91.

You, K.Y. and Hassan, A.H. and Sim, M.S. and Lee, K.Y. and Cheng, E.M. and Khe, C.S. (2024) Fused deposition modeling for 1 � 2 array of double ridge horn antenna. Microwave and Optical Technology Letters, 66 (1).

Younis, H.A. and Eisa, T.A.E. and Nasser, M. and Sahib, T.M. and Noor, A.A. and Alyasiri, O.M. and Salisu, S. and Hayder, I.M. and Younis, H.A. (2024) A Systematic Review and Meta-Analysis of Artificial Intelligence Tools in Medicine and Healthcare: Applications, Considerations, Limitations, Motivation and Challenges. Diagnostics, 14 (1).

Yousufi, M.M. and Mohyaldinn Elhaj, M.E. and Dzulkarnain, I.B. (2024) A Review on Use of Emulsified Acids for Matrix Acidizing in Carbonate Reservoirs. ACS Omega, 9 (10). pp. 11027-11049.

Yunus, R.B. and Zainuddin, N. and Daud, H. and Kannan, R. and Yahaya, M.M. and Karim, S.A.A. (2024) New CG-Based Algorithms With Second-Order Curvature Information for NLS Problems and a 4DOF Arm Robot Model. IEEE Access, 12. pp. 61086-61103. ISSN 21693536

Yusof, N.I.B.B.M. and Memon, A.M. and Sutanto, M.H. (2024) Investigation on the Properties of Reclaimed Asphalt Pavement Rejuvenated with Rubber Seed Oil. Lecture Notes in Civil Engineering, 324. pp. 411-420.

Yusuf, J.Y. and Soleimani, H. and Chuan, L.K. and Soleimani, H. and Sulaimon, A.A. and Balogun, B.B. and Adam, A.A. and Balogun, A.I. (2024) Eco-friendly Functionalization of MWCNTs with Deep Eutectic Solvents. Inorganic Chemistry Communications, 163.

Yusuf, M. and Ridha, S. and Kamyab, H. (2024) Recent progress in NP-Based Enhanced oil Recovery: Insights from molecular studies. Journal of Molecular Liquids, 396.

Yusuff, A.O. and Guan, B.H. and Sikiru, S. and Ayub, S. and Wahaab, F.A. and Yarima, M.H. and Almalki, A.A. (2024) Monte Carlo dynamics simulation of nanoparticles for enhanced oil recovery. Molecular Simulation, 50 (4). pp. 247-257.

Zahid, I. and Ayoub, M. and Nazir, M.H. and Sher, F. and Shamsuddin, R. and Abdullah, B.B. and Ameen, M. (2024) Kinetic & thermodynamic studies of green fuel additive solketal from crude glycerol over metakaolin clay catalyst. Biomass and Bioenergy, 181.

Zainal, A.Z. and Khan, J.A. and Maoinser, M.A. (2024) CFD-DEM Validation of Sand Retention Testing. Lecture Notes in Mechanical Engineering. pp. 123-132. ISSN 21954356

Zainal Abidin, M. and Rusli, R. (2024) Special Issue Introduction LPA2023. Process Safety Progress, 43 (S1). S3. ISSN 10668527

Zakaria, H. and Muhammad, M. (2024) Decision-making analysis in post-fire and explosion aftermath assessment tool: A fuzzy cognitive mapping approach. Process Safety Progress, 43 (S1). S134-S149. ISSN 10668527

Zango, Z.U. and Khoo, K.S. and Ali, A.F. and Abidin, A.Z. and Zango, M.U. and Lim, J.W. and Wadi, I.A. and Eisa, M.H. and Alhathlool, R. and Abu Alrub, S. and Aldaghri, O. and Suresh, S. and Ibnaouf, K.H. (2024) Development of inorganic and mixed matrix membranes for application in toxic dyes-contaminated industrial effluents with in-situ treatments. Environmental Research, 256.

Zango, Z.U. and Khoo, K.S. and Garba, A. and Garba, Z.N. and Danmallam, U.N. and Aldaghri, O. and Ibnaouf, K.H. and Ahmad, N.M. and Binzowaimil, A.M. and Lim, J.W. and Bhattu, M. and Ramesh, M.D. (2024) A review on titanium oxide nanoparticles modified metal-organic frameworks for effective CO2 conversion and efficient wastewater remediation. Environmental Research, 252.

Zango, Z.U. and Khoo, K.S. and Garba, A. and Lawal, M.A. and Abidin, A.Z. and Wadi, I.A. and Eisa, M.H. and Aldaghri, O. and Ibnaouf, K.H. and Lim, J.W. and Da Oh, W. (2024) A review on carbon-based biowaste and organic polymer materials for sustainable treatment of sulfonamides from pharmaceutical wastewater. Environmental Geochemistry and Health, 46 (4).

Zango, Z.U. and Lawal, M.A. and Usman, F. and Sulieman, A. and Akhdar, H. and Eisa, M.H. and Aldaghri, O. and Ibnaouf, K.H. and Lim, J.W. and Khoo, K.S. and Cheng, Y.W. (2024) Promoting the suitability of graphitic carbon nitride and metal oxide nanoparticles: A review of sulfonamides photocatalytic degradation. Chemosphere, 351.

Zavahir, S. and Riyaz, N.S. and Elmakki, T. and Tariq, H. and Ahmad, Z. and Chen, Y. and Park, H. and Ho, Y.-C. and Shon, H.K. and Han, D.S. (2024) Ion-imprinted membranes for lithium recovery: A review. Chemosphere, 354.

Zeeshan, M.H. and Yeong, Y.F. and Chew, T.L. (2024) Current Progress on Dual-Layer Hollow Fiber Mixed-Matrix Membrane in CO2 Capture. ChemBioEng Reviews.

Zhai, G. and Liu, J. and Ma, Z. and Teh, H.-M. (2024) A numerical study of the damage process of armour bricks on wave overtopping using a coupled SPH-DEM method. Computational Particle Mechanics, 11 (1). pp. 467-479.

Ziyada, A.K. and Osman, A. and Elbashir, A.A. and Khan, A.M. and Wilfred, C.D. (2024) Exploring the Effect of Different Anions and Cations on the Solubility of CO2 in Nitrile Imidazolium-Based Ionic Liquids with Sulfonated-Based Anions. Korean Journal of Chemical Engineering.

Zulkarnain, N.N. and Sazali, Y.A. and Hamid, A.I.A. and Kamizan, N. and Rahman, S.H.A. and Razak, A.A.A. and Habarudin, M.F. (2024) Characterization of Fly Ash: Effect on Compressive Strength and Thickening Time of Alkaline-Activated Fly Ash Cement at Downhole Condition. Lecture Notes in Civil Engineering, 324. pp. 107-118. ISSN 23662557

Zulkefli, M.I.I. and Al-Amin Endut, M.N. and Abdullah, M.R.T.L. (2024) Exploring Factors Affecting the Sustainability of Islamic Affairs in Malaysia: An Interpretive Structural Modeling (ISM) Approach. International Journal of Sustainable Development and Planning, 19 (2). pp. 703-713.

Zulkifli, F. and Abidin, R.Z. and Ariff, M.I.M. and Ahmad, N.A. and Arshad, N.I. and Ependi, U. and Razak, M.S.A. (2024) Measuring the National Digital Identity Initiative in Malaysia: A Pilot Study with Rasch Measurement. Journal of Advanced Research in Applied Sciences and Engineering Technology, 38 (2). pp. 153-164.