AL-Qutami, T.A. and Ibrahim, R. and Ismail, I. and Ishak, M.A. (2017) Radial basis function network to predict gas flow rate in multiphase flow. In: UNSPECIFIED.

Abbas, S.S. and Nasif, M.S. and Said, M.A.M. and Kadhim, S.K. (2017) Numerical investigation on effect of aortic root geometry on flow induced structural stresses developed in a bileaflet mechanical heart valve. In: UNSPECIFIED.

Abbas, S.S. and Shakir Nasif, M. and Meor Said, M.A. and Al-Waked, R. and Khalefa Kadhim, S. (2017) Numerical investigation on effect of leaflet thickness on structural stresses developed in a bileaflet mechanical heart valve for its sustainable manufacturing. In: UNSPECIFIED.

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2017) Comparison of Energy Absorption of Aluminium-composite Tubes Subjected to Axial Loading. In: UNSPECIFIED.

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2017) Effect of composite layers on partially wrapped Al-glass/epoxy hybrid tube subjected to axial load. In: UNSPECIFIED.

Abd Kader, S.A. and Putra Jaya, R. and Yaacob, H. and Hainin, M.R. and Abdul Hassan, N. and Wan Ibrahim, M.H. and Ali Mohamed, A. and Ichwana (2017) Stability and Volumetric Properties of Asphalt Mixture Containing Waste Plastic. In: UNSPECIFIED.

Abd Majid, M.A. and Kar Kin, L. (2017) Evaluations of thermocline and half cycle figure of merit of a thermal energy storage tank. In: UNSPECIFIED.

Abdalla, E.A.H. and Nallagownden, P. and Nor, N.M. and Romlie, M.F. and Abdalsalam, M.E. and Muthuvalu, M.S. (2017) Intelligent approach for optimal energy management of chiller plant using fuzzy and PSO techniques. In: UNSPECIFIED.

Abdalla, I. and Zainal, E.Z.A. and Ramlan, N.A. and Firmansyah and Aziz, A.R.A. and Heikal, M. (2017) Free piston linear generator for low grid power generation. In: UNSPECIFIED.

Abdalla, I.I. and Zainal, A.E.Z. and Ramlan, N.A. and Firmansyah and Aziz, A.R.A. and Heikal, M.R. (2017) Cogging force investigation of a free piston permanent magnet linear generator. In: UNSPECIFIED.

Abdelrasoul, Y. and Saman, A.B.S.H. and Sebastian, P. (2017) A quantitative study of tuning ROS gmapping parameters and their effect on performing indoor 2D SLAM. In: UNSPECIFIED.

Abdul Latiff, A.H. and Boon Hong, P.G. and Jamaludin, S.N.F. (2017) Improving Vintage Seismic Data Quality through Implementation of Advance Processing Techniques. In: UNSPECIFIED.

Abdullah, H. and Ibrahim, R. and Hassan, S.M. and Chung, T.D. (2017) Filtered feedback PID control for WirelessHART networked plant. In: UNSPECIFIED.

Abdullah, M.A. and Albarody, T.M.B. and Yusoff, P.S.M.B.M. (2017) Utilizing Proton Resonance Frequency of Isotopes Materials for Ultra-Precise Temperature Measurement: A Review. In: UNSPECIFIED.

Abdullah, M.E. and Abd Kader, S.A. and Putra Jaya, R. and Yaacob, H. and Abdul Hassan, N. and Che Wan, C.N. (2017) Effect of Waste Plastic as Bitumen Modified in Asphalt Mixture. In: UNSPECIFIED.

Abdullah, M.E. and Ahmad, N.A. and Jaya, R.P. and Hassan, N.A. and Yaacob, H. and Hainin, M.R. (2017) Effects of Waste Plastic on the Physical and Rheological Properties of Bitumen. In: UNSPECIFIED.

Abdullah, M.E. and Madzaili, A.H. and Jaya, R.P. and Yaacob, H. and Hassan, N.A. and Nazri, F.M. (2017) Voids characteristics of asphaltic concrete containing coconut shell. In: UNSPECIFIED.

Abdurakhman, Y.B. and Putra, Z.A. and Bilad, M.R. (2017) Aspen HYSYS simulation for biodiesel production from waste cooking oil using membrane reactor. In: UNSPECIFIED.

Abdurakhman, Y.B. and Putra, Z.A. and Bilad, M.R. (2017) Process simulation and economic analysis of biodiesel production from waste cooking oil with membrane bioreactor. In: UNSPECIFIED.

Achara, B.E. and Mohammed, B.S. and Nuruddin, M.F. (2017) Optimisation of nano-silica modified self-compacting high-Volume fly ash mortar. In: UNSPECIFIED.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Effect of Mineral Filler type on Strength of Roller Compacted Rubbercrete for Pavement Applications. In: UNSPECIFIED.

Adeeyo, Y.A. and Saaid, I.M. (2017) Artificial neural network modelling of viscosity at bubblepoint pressure and dead oil viscosity of Nigerian Crude Oil. In: UNSPECIFIED.

Adeyemi, B.J. and Sulaimon, A.A. (2017) Effects of ionic interactions on the stability and destabilization of water-in-crude oil emulsions. In: UNSPECIFIED.

Adha, K. and Wan Yusoff, W.I. and Lubis, L.A. (2017) Investigation of Thermophysical Parameters Properties for Enhancing Overpressure Mechanism Estimation. Case Study: Miri Area, West Baram Delta. In: UNSPECIFIED.

Adil, S.H. and Aziz, A.A. and Akber, T. and Ebrahim, M. and Ali, S.S.A. and Raza, K. (2017) 3D smart city simulator. In: UNSPECIFIED.

Affandhie, B.A. and Kurniasari, P.T. and Darmawan, M.S. and Subekti, S. and Wibowo, B. and Husin, N.A. and Bayuaji, R. and Irawan, S. (2017) The effects of bottom ash on setting time and compressive strength of fly ash geopolymer paste. In: UNSPECIFIED.

Aghasadeghi, A. and Mohebbi, H. and Che Ismail, M. (2017) Pipework integrity management in upstream oil and gas facilities. In: UNSPECIFIED.

Ahmad, M. and Iqbal, O. and Kadir, A.A. (2017) Quantification of Organic richness through wireline logs: A case study of Roseneath shale formation, Cooper basin, Australia. In: UNSPECIFIED.

Ahmad, M. and Rahim, L.A. and Arshad, N.I. (2017) Understanding relationships between learners and game environment of educational games: Hermeneutic approach. In: UNSPECIFIED.

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. (2017) Machine learning approach for classifying the cognitive states of the human brain with functional magnetic resonance imaging (fMRI). In: UNSPECIFIED.

Ahmed, A.Y. and Rabih, A.A.S. and Khir, M.H.M. and Basuwaqi, A.M.A. and Dennis, J.O. (2017) Theoretical modeling and FEA simulation of a CMOS-MEMS resonator. In: UNSPECIFIED.

Ahmed, K.Y. and Yahaya, N.Z. and Asirvadam, V.S. and Ramani, K. and Ibrahim, O. (2017) Comparison of fuzzy logic control and PI control for a three-level rectifier based on voltage oriented control. In: UNSPECIFIED.

Ahmed, S. and Elraies, K.A. and Hashmet, M.R. and Shaifan, S.R.B.M. and Hsia, I.C.C. and Bahrim, R.Z.K. (2017) Experimental investigation and optimization of polymer enhanced CO2 foam stability and apparent viscosity. In: UNSPECIFIED.

Ahmed Kabir, I.F.S. and Kanagalingam, S. and Safiyullah, F. (2017) Performance evaluation of air flow and thermal comfort in the room with Wind-Catcher using different CFD techniques under neutral Atmospheric Boundary Layer. In: UNSPECIFIED.

Ahsan, S. and Alemu Lemma, T. (2017) Remaining Useful Life Prediction of Gas Turbine Engine using Autoregressive Model. In: UNSPECIFIED.

Aiman Bin Romlan, M.F. and Parasuraman, S. and Khan, M.K.A.A. and Elamvazuthi, I. (2017) Motion synchronization of humanoid robot for playing soccer and ball detection methods. In: UNSPECIFIED.

Ajam, A. and Aziz, A.A. and Asirvadam, V.S. and Izhar, L.I. and Muda, S. (2017) Cerebral vessel enhancement using bilateral and Hessian-based filter. In: UNSPECIFIED.

Akbar, A. and Mokhtar, A.A.B. (2017) Integrating Life Cycle Costing (LCC) and Life Cycle Assessment (LCA) Model for Selection of Centralized Chilled Water Generation - Review Paper. In: UNSPECIFIED.

Akhir, E.A.P. and Hughes, R.T. and Cox, K. (2017) Information model to support sustainable procurement. In: UNSPECIFIED.

Akilu, S. and Baheta, A.T. and Sharma, K.V. and Said, M.A. (2017) Experimental determination of nanofluid specific heat with SiO2 nanoparticles in different base fluids. In: UNSPECIFIED.

Al-Azawiey, S.S. and Al-Kayiem, H.H. and Hassan, S.B. (2017) On the Influence of Collector Size on the Solar Chimneys Performance. In: UNSPECIFIED.

Al-Kayiem, H.H. and Gilani, S.I.U. and Abdalfatah, M.S. (2017) Experimental investigation of zero energy office under natural and forced ventilation. In: UNSPECIFIED.

Al-Qutami, T.A. and Ibrahim, R. and Ismail, I. (2017) Hybrid neural network and regression tree ensemble pruned by simulated annealing for virtual flow metering application. In: UNSPECIFIED.

Al-Shargie, F. and Tang, T.B. and Badruddin, N. and Dass, S.C. and Kiguchi, M. (2017) Mental stress assessment based on feature level fusion of fNIRS and EEG signals. In: UNSPECIFIED.

Al-Swai, B.M. and Osman, N.B. and Abdullah, B. (2017) Catalytic performance of Ni/MgO catalyst in methane dry reforming. In: UNSPECIFIED.

Alam, M.K. and Aziz, A.A. and Awang, A. and Latif, S.A. (2017) Performance analysis of different network topologies for driver safety monitoring application in WESN. In: UNSPECIFIED.

Alashloo, S.Y.M. and Ghosh, D.P. and Bashir, Y. and Yusoff, W.I.W. (2017) Depth Imaging Enhancement Using Reverse Time Migration. In: UNSPECIFIED.

Alhassan, A.M. and Saad, N.M. and Aljunid, S.A. (2017) Implementation of a passive optical network using coherent source spatial multiplexed SAC OCDMA. In: UNSPECIFIED.

Ali, A.A. and Dominic, P.D.D. (2017) The relationship between management support and individual motivation for knowledge sharing practice. In: UNSPECIFIED.

Ali, M.K.M. and Fudholi, A. and Muthuvalu, M.S. and Sulaiman, J. and Yasir, S.M. (2017) Implications of drying temperature and humidity on the drying kinetics of seaweed. In: UNSPECIFIED.

Ali, N.F. and Said, A.M. and Nisar, K. and Aziz, I.A. (2017) A survey on software defined network approaches for achieving energy efficiency in wireless sensor network. In: UNSPECIFIED.

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. (2017) Camera coverage prioritization to support security monitoring. In: UNSPECIFIED.

Altam, R.A. and Lemma, T.A. and Jufar, S.R. (2017) Trends in Supersonic Separator design development. In: UNSPECIFIED.

Amir, N. and Abidin, K.A.Z. and Shiri, F.B.M. (2017) Effects of Fibre Configuration on Mechanical Properties of Banana Fibre/PP/MAPP Natural Fibre Reinforced Polymer Composite. In: UNSPECIFIED.

Anak Penguang, A.S. and Lubis, L.A. and Hermana, M. and Ghosh, D.P. (2017) Study of Rock Physics and Seismic Attributes of Hydrocarbon Reservoirs in Sabah Basin. In: UNSPECIFIED.

Andarany, K.S. and Sagir, A. and Ahmad, A. and Deni, S.K. and Gunawan, W. (2017) Cellulose acetate layer effect toward aluminium corrosion rate in hydrochloric acid media. In: UNSPECIFIED.

Anwer, A. and Ali, S.S.A. and Khan, A. and Meriaudeau, F. (2017) Real-time underwater 3D scene reconstruction using commercial depth sensor. In: UNSPECIFIED.

Anwer, A. and Ali, S.S.A. and Khan, A. and Mériaudeau, F. (2017) Underwater 3D scanning using Kinect v2 time of flight camera. In: UNSPECIFIED.

Anwer, A. and Ali, S.S.A. and Meriaudeau, F. (2017) Underwater online 3D mapping and scene reconstruction using low cost kinect RGB-D sensor. In: UNSPECIFIED.

Anwer, A. and Meriaudeau, F. and Adil, S.H. (2017) Customized graphical user interface implementation of Kinect Fusion for underwater application. In: UNSPECIFIED.

Arozi, M. and Putri, F.T. and Ariyanto, M. and Caesarendra, W. and Widyotriatmo, A. and Munadi and Setiawan, J.D. (2017) Electromyography (EMG) signal recognition using combined discrete wavelet transform based on Artificial Neural Network (ANN). In: UNSPECIFIED.

Arozi, M. and Putri, F.T. and Ariyanto, M. and Khusnul Ari, M. and Munadi and Setiawan, J.D. (2017) Electromyography (EMG) signal recognition using combined discrete wavelet transform based adaptive neuro-fuzzy inference systems (ANFIS). In: UNSPECIFIED.

Arshad, H. and Sulaiman, S.A. and Hussain, Z. and Naz, Y. and Basrawi, F. (2017) Microwave assisted pyrolysis of plastic waste for production of fuels: A review. In: UNSPECIFIED.

Arshad, N.I. and Bosua, R. and Milton, S.K. and Mehat, M. (2017) Exploring modes of ECMS-use supporting organizational business processes. In: UNSPECIFIED.

Ashraf, M.S. and Azahar, S.B. and Yusof, N.Z. (2017) Soil Improvement Using MICP and Biopolymers: A Review. In: UNSPECIFIED.

Asirvadam, V.S. (2017) Message from the general chair. In: UNSPECIFIED.

Atemin, A. and Jainuddin, M.N. and Ong, C.Y. (2017) Yetagun field well delivery-infill ERD development wells drill to limit performance. In: UNSPECIFIED.

Atemin, A. and Ramasamy, K. and Jainuddin, M.N.R. and Ong, C. (2017) Planning and execution of ERD development wells project in Myanmar. In: UNSPECIFIED.

Aulia, A. and Jeong, D. and Mohd Saaid, I. and Shuker, M.T. and El-Khatib, N.A. (2017) A new history matching sensitivity analysis framework with random forests and Plackett-Burman design. In: UNSPECIFIED.

Aurybi, M.A. and Al-Kayiem, H.H. and Gilani, S.I.U. and Ismaeel, A.A. (2017) Numerical analysis of solar updraft power plant integrated with external heat source. In: UNSPECIFIED.

Awad, A. and Salam, A. and Abdullah, B. (2017) Thermocatalytic decomposition of methane/methanol mixture for hydrogen production: Effect of nickel loadings on alumina support. In: UNSPECIFIED.

Awais, M. and Badruddin, N. and Drieberg, M. (2017) EEG Brain Connectivity Analysis to Detect Driver Drowsiness Using Coherence. In: UNSPECIFIED.

Awais, M. and Muller, H. and Tang, T.B. and Meriaudeau, F. (2017) Classification of SD-OCT images using a Deep learning approach. In: UNSPECIFIED.

Axinte, E. and Bofu, A. and Wang, Y. and Abdul-Rani, A.M. and Aliyu, A.A.A. (2017) An overview on the conventional and nonconventional methods for manufacturing the metallic glasses. In: UNSPECIFIED.

Ayilara, A.Q. and Liew, M.S. (2017) Impact of the Overloading of Heavy Goods Vehicles on the Fatigue Life of Steel Bridges. In: UNSPECIFIED.

Ayoub, M. and Sufian, S. and Hailegiorgis, S.M. and Ullah, S. and Uemura, Y. (2017) Conversion of glycerol to polyglycerol over waste duck-bones as a catalyst in solvent free etherification process. In: UNSPECIFIED.

Azarpour, A. and Mutalib, M.I.A. and Mahadzir, S. and Ramli, A. (2017) Analysis of Hydrodynamic Parameters Effect on the Hydropurification Reactor Operation through Numerical Simulation. In: UNSPECIFIED.

Aziz, N. and Rahman, N.A. (2017) Use of ICT in indigenous primary school classroom: A case study of teachers' expectations and experiences. In: UNSPECIFIED.

Azizo, A.S. and Wirzal, M.D.H. and Bilad, M.R. and Yusoff, A.R.M. (2017) Assessment of nylon 6, 6 nanofibre membrane for microalgae harvesting. In: UNSPECIFIED.

Azman, N.I. and Jamaludin, S.N.F. (2017) Relationship of oil seep in Kudat Peninsula with surrounding rocks based on geochemical analysis. In: UNSPECIFIED.

Babiker, A. and Faye, I. and Malik, A. (2017) Investigation of situational interest effects on learning using physiological sensors: Preliminary result. In: UNSPECIFIED.

Babiker, A. and Faye, I. and Malik, A. (2017) A physiological index for situational interest in classroom settings using EEG (preliminary result). In: UNSPECIFIED.

Bala, N. and Kamaruddin, I. and Napiah, M. and Danlami, N. (2017) Rheological and rutting evaluation of composite nanosilica/polyethylene modified bitumen. In: UNSPECIFIED.

Basha, I.H.K. and Hamid, N.H. and Yousuff, C.M. and Ho, E.T.W. (2017) Irreversible electroporation of multiple blood cells in continuous flow microfluidic device-A theoretical study. In: UNSPECIFIED.

Bashir, M.J.K. and Wong, J.W. and Sethupathi, S. and Aun, N.C. and Wei, L.J. (2017) Preparation of Palm Oil Mill Effluent Sludge Biochar for the Treatment of Landfill Leachate. In: UNSPECIFIED.

Bashir, Y. and Ghosh, D. and Sum, C.W. (2017) Preservation of Seismic Diffraction to Enhance the Resolution of Seismic Data. In: UNSPECIFIED.

Bashir, Y. and Ghosh, D.P. and Alashloo, S.Y.M. and Sum, C.W. (2017) Importance of Seismic Diffractions for Fractures Imaging. In: UNSPECIFIED.

Basim Ismail, F. and Hamzah Abed, K. and Singh, D. and Shakir Nasif, M. (2017) Pure intelligent monitoring system for steam economizer trips. In: UNSPECIFIED.

Basim Ismail, F. and Why Siew Kuan, E. and Shakir Nasif, M. (2017) Development and implementation of bottom ash crushing system in Submerged Scrapper Conveyor (SSC) for Coal-fired Power Plant. In: UNSPECIFIED.

Basri, W.N.F.W. and Lim, J.-W. and Isa, M.H. and Baloo, L. and Uemura, Y. and Bashir, M.J.K. (2017) Modifications of sugarcane bagasse-derived adsorbents to enhance the adsorption of microalgae biomass in easing harvesting process. In: UNSPECIFIED.

Basuwaqi, A.M. and Md Khir, M.H. and Ahmed, A.Y. and Rabih, A.A.S. and Mian, M.U. and Dennis, J.O. (2017) Effects of frequency and voltage on the output of CMOS-MEMS device. In: UNSPECIFIED.

Bataee, M. and Hamdi, Z. and Irawan, S. and Ashena, R. and Ghassemi, M.F. (2017) Effect of saturation alteration on wellbore stability during WAG Injection. In: UNSPECIFIED.

Bekdash, M. and Asirvadam, V.S. and Kamel, N. and Yanti, D.K. (2017) Estimation of driver alertness to different colors and intensities using brain visual evoked potentials. In: UNSPECIFIED.

Bhatti, M.S. and Rasheed, W. and Tang, T.B. and Laude, A. (2017) Investigating eye-strain due to prolonged exposure to low resolution multimedia using LSFG. In: UNSPECIFIED.

Bhatti, M.S. and Rasheed, W. and Tang, T.B. and Laude, A. (2017) Temporal comparison of ocular blood flow in quadrant divisions of optic nerve head before and after water drinking test. In: UNSPECIFIED.

Bilad, M.R. and Druyts, J. and Vankelecom, I.F.J. (2017) Role of surface pores on fouling of polyvinylidene fluoride membranes in submerged membrane bioreactors. In: UNSPECIFIED.

Bin Abdul Karim, S.A. (2017) Rational Cubic Spline Interpolation for Monotonic Interpolating Curve with C2 Continuity. In: UNSPECIFIED.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Chung, T.D. and Hassan, S.M. (2017) Optimal PID control of pH neutralization plant. In: UNSPECIFIED.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. (2017) Fuzzy gain scheduled set-point weighted PID controller for unstable CSTR systems. In: UNSPECIFIED.

Binti Mad Juhani, J. and Bin Ibrahim, R. (2017) Acoustic emission technique for early leakage detection of in-service control valve. In: UNSPECIFIED.

Biyanto, T.R. and Matradji and Irawan, S. and Febrianto, H.Y. and Afdanny, N. and Rahman, A.H. and Gunawan, K.S. and Pratama, J.A.D. and Bethiana, T.N. (2017) Killer Whale Algorithm: An Algorithm Inspired by the Life of Killer Whale. In: UNSPECIFIED.

Biyanto, T.R. and Matradji and Sawal and Rahman, A.H. and Abdillah, A.I. and Bethiana, T.N. and Irawan, S. (2017) Application of Killer Whale Algorithm in ASP EOR Optimization. In: UNSPECIFIED.

Chai, K. and Liew, M.S. and Lee, H.E. (2017) Numerical wave tank modelling of regular waves propagation using OpenFOAM. In: UNSPECIFIED.

Chai, M.T. and Saad, M.N.M. and Kamel, N. and Malik, A.S. (2017) EEG analysis of color effects using effective connectivity based on graph theory during a multimedia learning task. In: UNSPECIFIED.

Chai, Y.H. and Yusup, S. and Chok, V.S. and Irawan, S. and Singh, J.D.B.S. and Chin, B.L.F. (2017) Comparison of rheological properties of graphene / carbon nanotube hydrogenated oil based biodegradable drilling fluid. In: UNSPECIFIED.

Chan, G.C.Y. and Muhammad, A. and Shah, S.A.A. and Tang, T.B. and Lu, C.-K. and Meriaudeau, F. (2017) Transfer learning for Diabetic Macular Edema (DME) detection on Optical Coherence Tomography (OCT) images. In: UNSPECIFIED.

Changcheng, L. and Ghosh, D. (2017) Coal Seams Removal using Matching Pursuit Method: A Case Study in the Malay Basin. In: UNSPECIFIED.

Changcheng, L. and Ghosh, D. (2017) Matching Pursuit Based Pseudo Wigner-Ville Distribution: A Case Study in the Malay Basin. In: UNSPECIFIED.

Che-Ani, M.N. and Kamaruddin, S. and Azid, I.A. (2017) Towards just-in-time (JIT) production system through enhancing part preparation process. In: UNSPECIFIED.

Chee, L.H. and Kumar, P. and Kang, C.H. and Burhanudin, Z.A. (2017) DNA/AuNP-graphene back-gated field effect transistor as a biosensor for lead (II) ion detection. In: UNSPECIFIED.

Chee, P.S. and Elamvazuthi, I. and Izhar, L.I. and Tageldeen, M.K. and Capi, G. (2017) Robotics rehabilitation for assessment of activities of daily living (ADL). In: UNSPECIFIED.

Chien, L.J. and Drieberg, M. and Sebastian, P. and Hiung, L.H. (2017) A simple solar energy harvester for wireless sensor networks. In: UNSPECIFIED.

Chuan, N.K. and Sivaji, A. and Loo, F.A. and Ahmad, W.F.W. and Nathan, S.S. (2017) Evaluating 'Gesture Interaction' requirements of mobile applications for deaf users: Discovering the needs of the hearing-impiared in using touchscreen gestures. In: UNSPECIFIED.

Chughtai, O. and Badruddin, N. and Awang, A. (2017) A node/link level congestion detection approach in low power and limited broadcast range wireless ad hoc networks. In: UNSPECIFIED.

Chughtai, O. and Badruddin, N. and Awang, A. (2017) A novel congestion alleviation procedure in multi-hop wireless sensor networks. In: UNSPECIFIED.

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2017) Effect of network induced delays on WirelessHART control system. In: UNSPECIFIED.

Chung, T.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Hassan, S.M. (2017) Latency analysis of WirelessHART control message with variable payload. In: UNSPECIFIED.

Chung, T.D. and Ibrahim, R. and Hassan, S.M. and Rosli, N.S. (2017) Fast approach for automatic data retrieval using R programming language. In: UNSPECIFIED.

Dahalan, A.A. and Muthuvalu, M.S. and Aruchunan, E. and Sulaiman, J. and Din, W.R.W. (2017) Application of implicit scheme with AGE iterative method for solving fuzzy parabolic equation. In: UNSPECIFIED.

Danaei, S. and Hermana, M. and Ghosh, D.P. (2017) 4D seismic reservoir surveillance for a field located in Malaysian basins using different time-lapse seismic attributes. In: UNSPECIFIED.

Daneshpajouh, H. and Zakaria, N. (2017) A clustering-based visual analysis tool for Genetic Algorithm. In: UNSPECIFIED.

Dang Huu, T. and Ismail, I.B. (2017) Modelling of Twin Rotor MIMO system. In: UNSPECIFIED.

Daud, S.A. and Elamvazuthi, I. and Zulkifli, Z.B. and Parasuraman, S. and Khan, M.K.A.A. (2017) Analysis of thermal imaging in determining muscle contractions of upper extremities. In: UNSPECIFIED.

Dominic, P.D.D. and Maitra, S. (2017) A study on the relationship between supply chain integration, disintegration and organizational efficiency. In: UNSPECIFIED.

Egambaram, A. and Badruddin, N. and Asirvadam, V.S. and Begum, T. and Fauvet, E. and Stolz, C. (2017) Variance thresholded EMD-CCA technique for fast eye blink artifacts removal in EEG. In: UNSPECIFIED.

Eliseus, A. and Bilad, M.R. (2017) Improving membrane fouling control by maximizing the impact of air bubbles shear in a submerged plate-and-frame membrane module. In: UNSPECIFIED.

Emani, S. and Ramasamy, M. and Shaari, K.Z.K. (2017) CFD modelling of shell-side asphaltenes deposition in a shell and tube heat exchanger. In: UNSPECIFIED.

Emani, S. and Ramasamy, M. and Shaari, K.Z.K. (2017) Transportation and adhesion of asphaltenes in a heat exchanger tube through CFD simulations. In: UNSPECIFIED.

Eshak, M.I. and Ahmad, R. and Sarlan, A. (2017) A preliminary study on hybrid sentiment model for customer purchase intention analysis in socialcommerce. In: UNSPECIFIED.

Essam, M. and Tang, T.B. and Ho, E.T.W. and Chen, H. (2017) Dynamic point stochastic rounding algorithm for limited precision arithmetic in Deep Belief Network training. In: UNSPECIFIED.

Fadzil, A.F.M. and Bustam, M.A. and Aziz, N.D.A. and Yahya, N.F. and Zainol, N.H. (2017) Characterization of doped LiMn2O4 powder prepared by the sol-gel method: Thermal analysis and XRD studies. In: UNSPECIFIED.

Fadzilah, F.M. and Arshad, N.I. (2017) Towards the development of criteria to assess stuttering mobile apps. In: UNSPECIFIED.

Faiz Abdul Wahab, M.A. and Sokiman, M.S. and Jakobsen, K.P. (2017) Numerical modelling for quantitative environmental risk assessment for the disposal of drill cuttings and mud. In: UNSPECIFIED.

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Baharom, M.A. (2017) Burst pressure investigation of filament wound type IV composite pressure vessel. In: UNSPECIFIED.

Fathiyah Jamaludin, S.N. and Mubin, M. and Abdul Latiff, A.H. (2017) Imaging of karst on buried Miocene Carbonate Platform. In: UNSPECIFIED.

Fauzi, H. and Shapiai, M.I. and Setiawan, N.A. and Jaafar, J. and Mustafa, M. (2017) Channel selection for common spatial pattern Based on energy calculation of motor imagery EEG signal. In: UNSPECIFIED.

Fernandes, C.S. and Bilad, M.R. and Nordin, N.A.H.M. (2017) Silica incorporated membrane for wastewater based filtration. In: UNSPECIFIED.

Fong, K.S. and Mohd Yassin, A.Y. (2017) Fluid-Structure Interaction (FSI) of Damped Oil Conveying Pipeline System by Finite Element Method. In: UNSPECIFIED.

Foong, F.M. and Thein, C.K. and Ooi, B.L. and Aziz, A.R.A. (2017) A low-cost vibration analyser for analogue electromagnetic shaker. In: UNSPECIFIED.

Fuad, I.I.M. and Lee, J.H. and Akhir, N.A.M. and Zulkifli, I. (2017) Enumeration approach in condensate banking study of gas condensate reservoir. In: UNSPECIFIED.

Galaleldin, S. and Mannan, H.A. and Mukhtar, H. (2017) Development and characterization of polyethersulfone/TiO2 mixed matrix membranes for CO2/CH4 separation. In: UNSPECIFIED.

Gandhamal, A. and Talbar, S. and Gajre, S. and Hani, A.F.M. and Kumar, D. (2017) A generalized contrast enhancement approach for knee MR images. In: UNSPECIFIED.

Gardezi, S.J.S. and Awais, M. and Faye, I. and Meriaudeau, F. (2017) Mammogram classification using deep learning features. In: UNSPECIFIED.

Gebremariam, M.A. and Yuan, S.X. and Azhari, A. and Lemma, T.A. (2017) Remaining tool life prediction based on force sensors signal during end milling of Stavax ESR steel. In: UNSPECIFIED.

Ghalehkhani, P. and Parasuraman, S. and Khan, M.K.A.A. and Elamvazuthi, I. and Debnath, N. and Ali, S.S.A. (2017) Forearm pressure distribution during ambulation with elbow crutches. In: UNSPECIFIED.

Goh, C.M. and Saad, N.M. and Malik, A.S. (2017) A simplified method for forearm subcutaneous veins depth estimation. In: UNSPECIFIED.

Gonfa, G. and Ismail, M. and Bustam, M.A. (2017) Benzene and cyclohexane separation using 1-butyl-3-methylimidazolium thiocyanate. In: UNSPECIFIED.

Gurusamy, N. and Elamvazuthi, I. and Yahya, N. and Parasuraman, S. and Khan, M.K.A.A. (2017) Biomechanical energy harvesting from human lower extremity gait: A comparative analysis. In: UNSPECIFIED.

Hafeez, Y. and Ali, S.S.A. (2017) Discrete-time H� control of a class of underactuated electromechanical systems. In: UNSPECIFIED.

Hailegiorgis, S.M. and Khan, S.N. and Abdolah, N.H.H. and Ayoub, M. and Tesfamichael, A. (2017) Carbon dioxide capture via aqueous N-methyldiethanolamine (MDEA)-1-butyl-3-methylimidazolium acetate (bmimAc) hybrid solvent. In: UNSPECIFIED.

Hailu Shimels, G. and Dereje Engida, W. and Fakhruldin Mohd, H. (2017) A comparative study on stress and compliance based structural topology optimization. In: UNSPECIFIED.

Hairi, H.H. and Md Rafek, A.G. and Abdul Latiff, A.H. (2017) Seismic input optimisation for Joint Migration Inversion on complex structures, Malay Basin. In: UNSPECIFIED.

Haizad, M. and Ibrahim, R. and Adnan, A. and Chung, T.D. and Hassan, S.M. (2017) Development of low-cost real-time data acquisition system for process automation and control. In: UNSPECIFIED.

Halim, A.H. and Ismail, I. (2017) Online PID controller tuning using tree physiology optimization. In: UNSPECIFIED.

Halim, A.H. and Ismail, I. (2017) Single and Multiple variables control using Tree Physiology Optimization. In: UNSPECIFIED.

Halim, A.H. and Ismail, I. (2017) Tree Physiology Optimization tuning rule for Proportional-Integral control. In: UNSPECIFIED.

Hamadelnil, A. and Razak, Z.A. and Matsoom, E. and Kurian, V.J. (2017) Improvement of fixed offshore platforms' boat landing performance using practicable design criteria. In: UNSPECIFIED.

Hamdi, Z. and Awang, M. and Bataee, M. and Vatanparast, M. (2017) Proposing low temperature CO2 for enhancing miscibility in high temperature reservoirs. In: UNSPECIFIED.

Hamza, M.F. and Sinnathambi, C.M. and Merican, Z.M.A. (2017) Recent advancement of hybrid materials used in chemical enhanced oil recovery (CEOR): A review. In: UNSPECIFIED.

Hanapiah, N.M. and Wan Yusoff, W.I. and Zakariah, M.N.A. (2017) Analysis on the overpressure characterization with respect to depositional environment facies: Case Study in Miri Area, Baram Delta. In: UNSPECIFIED.

Hani, A.F.M. and Paputungan, I.V. and M Fadzil, H. and Vijanth, S.A. (2017) Manifold learning in SLA violation detection and prediction for cloud-based system. In: UNSPECIFIED.

Hanouneh, S. and Amin, H.U. and Saad, N.M. and Malik, A.S. (2017) The correlation between EEG asymmetry and memory performance during semantic memory recall. In: UNSPECIFIED.

Hardjasudjana, A.W. and Kosalishkwaran, G. and Parasuraman, S. and Khan, M.K.A.A. and Elamvazuthi, I. (2017) Kinesis (In-vivo/In-vitro) of L5-S1 lumbar spine. In: UNSPECIFIED.

Haron, N. and Jaafar, J. and Aziz, I.A. and Hassan, M.H. and Shapiai, M.I. (2017) Data trustworthiness in Internet of Things: A taxonomy and future directions. In: UNSPECIFIED.

Harsoori, M.M. and Zulkifli, T.Z.A. (2017) 60 GHz microstrip filter in 0.13μm RF CMOS technology. In: UNSPECIFIED.

Harsoori, M.M. and Zulkifli, T.Z.A. and Abbas, U. and Sattar, S. (2017) A gain boosting single stage cascode LNA for millimeter-wave applications. In: UNSPECIFIED.

Hasan, E. and Bin Ibrahim, R. and Ali, S.S.A. and Miya, H.S. and Gilani, S.F. (2017) U-Model based online identification of Air Flow Plant. In: UNSPECIFIED.

Hasan, E. and Ibrahim, R. and Bingi, K. and Hassan, S.M. and Gilani, S.F. (2017) Real-Time model predictive control for nonlinear gas pressure process plant. In: UNSPECIFIED.

Hasan, E. and Ibrahim, R. and Taqvi, S.A.A. and Olivier, C. (2017) Online system modeling of chemical process plant using U-model. In: UNSPECIFIED.

Hashim, A.S. and Ahmad, W.F.W. (2017) Usability factors that influence effectiveness of mobile learning management system (MLMS) for secondary schools in Malaysia. In: UNSPECIFIED.

Hashim, A.S. and Ahmad, W.F.W. and Sarlan, A. (2017) A study on acceptance of mobileschool at secondary schools in Malaysia: Urban vs rural. In: UNSPECIFIED.

Hassan, M.A. and Malik, A.S. and Saad, N. and Fofi, D. and Meriaudeau, F. (2017) Effect of motion artifact on digital camera based heart rate measurement. In: UNSPECIFIED.

Hassan, M.A. and Malik, A.S. and Saad, N. and Karasfi, B. and Fofi, D. and Sohail, W. (2017) Towards health monitoring in visual surveillance. In: UNSPECIFIED.

Hassan, M.A. and Pardiansyah, I. and Malik, A.S. and Faye, I. and Rasheed, W. (2017) Enhanced people counting system based head-shoulder detection in dense crowd scenario. In: UNSPECIFIED.

Hassan, S. and Khanesar, M.A. and Jaafar, J. and Khosravi, A. (2017) A multi-objective genetic type-2 fuzzy extreme learning system for the identification of nonlinear dynamic systems. In: UNSPECIFIED.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Bingi, K. (2017) Spiral dynamic algorithm based optimal PPI controller for WirelessHART networked systems. In: UNSPECIFIED.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Bingi, K. and Chung, T.D. (2017) Signal noise filter structure selection for predictive PI controller in a wireless networked control setting. In: UNSPECIFIED.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2017) Implementation of real-time WirelessHART network for control application. In: UNSPECIFIED.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2017) Predictive PI controller for wireless control system with variable network delay and disturbance. In: UNSPECIFIED.

Hassanudin, S.N. and Aziz, I.A. and Jaafar, J. and Qaiyum, S. and Zubir, W.M.A.M. (2017) Predictive analytic dashboard for desalter and crude distillation unit. In: UNSPECIFIED.

Herman, M. and Syahmi Hashim, H. and Abdul Latif, A.H. and Ghosh, D.P. (2017) Application of FK Filtering for Coherent Noise Removal in High Frequency Shallow Marine Data. In: UNSPECIFIED.

Hidayah, N.M.S. and Liu, W.-W. and Lai, C.-W. and Noriman, N.Z. and Khe, C.-S. and Hashim, U. and Lee, H.C. (2017) Comparison on graphite, graphene oxide and reduced graphene oxide: Synthesis and characterization. In: UNSPECIFIED.

Hidayat, M.I.P. and Irawan, S. and Abdullah, M.Z. (2017) Effect of casing imperfection on the casing strength in steam injection wells. In: UNSPECIFIED.

Hina, S. and Dominic, D.D. (2017) Digital connectivity and sharing at school: Opportunities and security challenges of using social networking sites. In: UNSPECIFIED.

Hina, S. and Dominic, D.D. (2017) Need for information security policies compliance: A perspective in Higher Education Institutions. In: UNSPECIFIED.

Hizam, S. and Bilad, M.R. and Putra, Z.A. (2017) Integration of membrane distillation into traditional salt farming method: Process development and modelling. In: UNSPECIFIED.

Hooda, R. and Sofat, S. and Kaur, S. and Mittal, A. and Meriaudeau, F. (2017) Deep-learning: A potential method for tuberculosis detection using chest radiography. In: UNSPECIFIED.

Hooi, L.Y. and Hiung, L.H. and Drieberg, M. and Sebastian, P. (2017) Configurable 2 bits per cycle successive approximation register for analog to digital converter on FPGA. In: UNSPECIFIED.

Huang, K.L. and Baioumy, H. and Lim, J.M. and Lim, L.Y.S. and Yong, S. and Rajoo, T. and Hareedranathan, D.M. (2017) Sedimentology of black shale in turbidite at Semanggol Formation. In: UNSPECIFIED.

Husain, K. and Awang, A.B. and Kamel, N. (2017) Receiver-based data forwarding in vehicular ad hoc networks. In: UNSPECIFIED.

Hussain, N. and Karsiti, M.N. and Jeoti, V. and Yahya, N. and Yahya, N. (2017) 2D controlled source electromagnetic modeling in layered medium using hybrid method. In: UNSPECIFIED.

Hussain, N.A.A. and Ali, S.S.A. and Saad, M.N.M. and Nordin, N. (2017) Underactuated nonlinear adaptive control approach using U-model for multivariable underwater glider control parameters. In: UNSPECIFIED.

Hussain, N.A.A. and Ali, S.S.A. and Saad, M.N.M. and Ovinis, M. (2017) Nonlinear adaptive control synthesis using U-model for multivariable underwater remotely operated vehicle. In: UNSPECIFIED.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2017) Comparative studies of PID controller tuning methods on a DC-DC boost converter. In: UNSPECIFIED.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Ahmed, K.Y. (2017) Design and simulation of phase-shifted full bridge converter for hybrid energy systems. In: UNSPECIFIED.

Ibrahim, R. and Gilani, S.F.U.H. and Jamil, A. and Yusoff, M.Z. (2017) Design and analysis of an RF rectifying circuit upon integration with monopole and Fractal antennas. In: UNSPECIFIED.

Imam, A.A. and Basri, S. and Ahmad, R. and Aziz, N. and Gonzalez-Aparicio, M.T. (2017) New cardinality notations and styles for modeling NoSQL document-store databases. In: UNSPECIFIED.

Inayat, A. and Ghenai, C. and Ayoub, M. and Eisa, E. (2017) Simulation for the production of synthetic natural gas for vehicles (SNGV) from palm waste via gasification with in-situ CO2 capture. In: UNSPECIFIED.

Inayat, A. and Ghenai, C. and Naqvi, M. and Ammar, M. and Ayoub, M. and Hussin, M.N.B. (2017) Parametric Study for Production of Dimethyl Ether (DME) As a Fuel from Palm Wastes. In: UNSPECIFIED.

Inayat, M. and Sulaiman, S.A. and Kurnia, J.C. (2017) Investigation on the effect of blending ratio and airflow rate on syngas profile produced from co-gasification of blended feedstock. In: UNSPECIFIED.

Iqbal, A. and Jeoti, V. and Drieberg, M. and Wen, W.P. (2017) Chu sequence based phasing scheme for low PAPR multicarrier waveform for channel sounding. In: UNSPECIFIED.

Irawan, S. and Kinif, B.I. and Bayuaji, R. (2017) Maximizing drilling performance through enhanced solid control system. In: UNSPECIFIED.

Irawan, S. and Permatasari, K.A. and Bayuaji, R. (2017) Effect of density and resistivity measurement for foam flooding propagation in static condition. In: UNSPECIFIED.

Irfan, M. and Ahmad, T. and Moniruzzaman, M. and Abdullah, B. (2017) Effect of pH on ionic liquid mediated synthesis of gold nanoparticle using elaiseguineensis (palm oil) kernel extract. In: UNSPECIFIED.

Irfan, S.A. and Razali, R. and Kushaari, K. and Mansor, N. and Azeem, B. (2017) Analytical solution of diffusion model for nutrient release from controlled release fertilizer. In: UNSPECIFIED.

Ismaeel, A.A. and Al-Kayiem, H.H. and Baheta, A.T. and Aurybi, M.A. (2017) CFD modeling of artificial vortex air generator for green electric power. In: UNSPECIFIED.

Ismail, M. and Bustam, M.A. and Man, Z. (2017) Extraction of benzene and cyclohexane using BMIMN(CN)2 and their equilibrium modeling. In: UNSPECIFIED.

Ismail, M. and Ludin, N.A. and Hamid, N.H. and Ibrahim, M.A. and Zulfakar, M.S. and Mohamed, N.M. and Sopian, K. (2017) Characterizations of natural dye from garcinia mangostana with graphene oxide (GO) as sensitizer in dye-sensitizer solar cells. In: UNSPECIFIED.

Ismail, N.F. and Hasan, M.H. and Mustapha, E.E. (2017) Literature review on technology usage and emotional connection among children. In: UNSPECIFIED.

Ismail, S. and Mansor, N. and Man, Z. (2017) A Study on Thermal Behaviour of Thermoplastic Starch Plasticized by Emim Ac and by Emim Cl. In: UNSPECIFIED.

Izhar, L.I. and Elamvazuthi, I. and Stathaki, T. and Howell, K. and Omar, Z. (2017) Multimodal image registration for potential diagnosis and monitoring of morphoea using a hybrid NGC method. In: UNSPECIFIED.

Izzatie, N.I. and Basha, M.H. and Uemura, Y. and Hashim, M.S.M. and Amin, N.A.M. and Hamid, M.F. (2017) Co-pyrolysis of rice straw and Polyethylene Terephthalate (PET) using a fixed bed drop type pyrolyzer. In: UNSPECIFIED.

Jamali, A.A. and Nor, N.M. and Ibrahim, T. and Romlie, M.F. (2017) An analytical approach for the sizing and siting of battery-sourced inverters in distribution networks. In: UNSPECIFIED.

Jamaludin, A.A. and Mehat, N.M. and Kamaruddin, S. (2017) Investigating the effects of PDC cutters geometry on ROP using the Taguchi technique. In: UNSPECIFIED.

Janjuhah, H.T. and Salim, A.M.A. and Al, M.Y. and Ghosh, D.P. and Hakif, M. and Hassan, A. (2017) Development of carbonate buildups and reservoir architecture of miocene carbonate platforms, central luconia, offshore sarawak, Malaysia. In: UNSPECIFIED.

Jati, H. and Dominic, D.D. (2017) A New Approach of Indonesian University Webometrics Ranking Using Entropy and PROMETHEE II. In: UNSPECIFIED.

Jatoi, M.A. and Kamel, N. and López, J.D. and Faye, I. and Malik, A.S. (2017) MSP based source localization using EEG signals. In: UNSPECIFIED.

Jatoi, M.A. and Kamel, N. and Musavi, S.H.A. (2017) Framework for estimating active brain sources using MUSIC and Root MUSIC. In: UNSPECIFIED.

Javaid, M.Y. and Ovinis, M. and Hashim, F.B.M. and Maimun, A. and Ali, S.S.A. and Ahmed, S.A. (2017) Investigation on the dynamic stability of an underwater glider using CFD simulation. In: UNSPECIFIED.

Jee Chen Hung, C. and Perumal, N. and Elamvazuthi, I. and Tageldeen, M.K. and Khan, M.K.A.A. and Parasuraman, S. (2017) Home-based interactive rehabilitation system for hand. In: UNSPECIFIED.

Jessam, R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2017) Flow control in s-shaped air intake diffuser of gas turbine using proposed energy promoters. In: UNSPECIFIED.

Jufar, S.R. and Djuraev, U. and Irawan, S. and Lubis, L.A. (2017) Influence of Saturant on Seismoelectric Coupling Response of Porous Media. In: UNSPECIFIED.

Jung, L.T. (2017) Preface: Advances in Energy Science and Environment Engineering. In: UNSPECIFIED.

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2017) Fabrication of 6FDA-durene membrane incorporated with zeolite T and aminosilane grafted zeolite T for CO2/CH4 separation. In: UNSPECIFIED.

Kadhim Khlief, A. and Ihtsham-Ul-Haq Gilani, S. and Al-Kayiem, H.H. and Mohammad, S.T. (2017) Design and modelling of novel evacuated receiver tube of concentration solar power system by using heliostat stadium arrangement. In: UNSPECIFIED.

Kai Sheng, O. and Alemu Lemma, T. and Ahsan, S. (2017) PDC Bit Hydraulic & Mud Rheological simulation to model pressure drop across Bit. In: UNSPECIFIED.

Kajo, I. and Malik, A.S. and Kamel, N. (2017) An evaluation of optical flow algorithms for crowd analytics in surveillance system. In: UNSPECIFIED.

Kalid, K.S. (2017) The investigation of knowledge management practices among healthcare practitioners in Malaysia. In: UNSPECIFIED.

Kalid, K.S. and Rosli, N. (2017) The design of a schoolchildren identification and transportation tracking system. In: UNSPECIFIED.

Kamariah, M.S.I.N. and Harun, W.S.W. and Khalil, N.Z. and Ahmad, F. and Ismail, M.H. and Sharif, S. (2017) Effect of heat treatment on mechanical properties and microstructure of selective laser melting 316L stainless steel. In: UNSPECIFIED.

Kanesan, D. and Ridha, S. and Rao, P. (2017) Formulation of geopolymer cement using mixture of slag and class f fly ash for oil well cementing. In: UNSPECIFIED.

Kang, C.H. and Burhanudin, Z.A. and Saheed, M.S.M. and Mohamed, N.M. (2017) Synthesis parameters and transfer techniques of mono-few layer graphene for transparent conductive electrode. In: UNSPECIFIED.

Kannan, R. and Aleem, S.H.E.A. and Zobaa, A.F. and Monem, A.M.A. (2017) Optimal multiple-steps single-tuned harmonic filters under time-varying conditions. In: UNSPECIFIED.

Kannan, R. and Angamuthu, R. and Ahmed, K.Y. (2017) Photo energy conversion using synchronous sequential circuit based diode clamp multilevel inverter. In: UNSPECIFIED.

Kannan, R. and Samad, N.I.A. and Romlie, M.F. and Nor, N.M. and Kumar, L.A. (2017) Design and execution of single input multiple output DC-DC converter. In: UNSPECIFIED.

Kareem, S. and Ahmad, R.B. and Sarlan, A.B. (2017) Framework for the identification of fraudulent health insurance claims using association rule mining. In: UNSPECIFIED.

Karia, S. and Parasuraman, S. and Khan, M.K.A.A. and Elamvazuthi, I. and Debnath, N. and Ali, S.S.A. (2017) Plantar pressure distribution and gait stability: Normal VS high heel. In: UNSPECIFIED.

Kazmi, D. and Qasim, S. and Harahap, I.S.H. (2017) Evaluation of the causes of Bukit Antarabangsa 2008 landslide by using fault tree analysis. In: UNSPECIFIED.

Kazmi, D. and Qasim, S. and Harahap, I.S.H. and Baharom, S. and Masood, A. and Imran, M. (2017) A Study on Landslide Risk Management by Applying Fault Tree Logics. In: UNSPECIFIED.

Khan, A. and Ali, S.S.A. and Malik, A.S. and Anwer, A. and Hussain, N.A.A. and Meriaudeau, F. (2017) Control of autonomous underwater vehicle based on visual feedback for pipeline inspection. In: UNSPECIFIED.

Khan, A. and Ali, S.S.A. and Malik, A.S. and Anwer, A. and Meriaudeau, F. (2017) Underwater image enhancement by wavelet based fusion. In: UNSPECIFIED.

Khan, A. and Alkali, M.A. and Parasuraman, S. and Elamvazuthi, I. and Amudha, M. and Debnath, N. (2017) Harmonics analysis in a DC-DC converter based line frequency inverter for domestic lighting loads. In: UNSPECIFIED.

Khan, A. and Meriaudeau, F. and Ali, S.S.A. and Malik, A.S. (2017) Underwater image enhancement and dehazing using wavelet based fusion for pipeline corrosion inspection. In: UNSPECIFIED.

Khan, A.M. and Jeoti, V. and Rehman, M. and Jilani, M. (2017) Noise power estimation for broadcasting OFDM systems. In: UNSPECIFIED.

Khan, A.M. and Jeoti, V. and Rehman, M.Z.Ur. and Jilani, M.T. and Zakariya, M.A. (2017) A cyclic correlation-based time domain channel estimation scheme. In: UNSPECIFIED.

Khan, J. and Malik, A.S. and Kamel, N. and Das, S.C. and Affandi, A.M. (2017) Effect of color feature normalization on segmentation of color images. In: UNSPECIFIED.

Khan, M.K.A.A. and Abdalla, M. and Parasuraman, S. and Elamvazuthi, I. and Amudha, M. and Debnath, N. (2017) Performance analysis of a drive system for electrical vehicle application. In: UNSPECIFIED.

Khan, S. and Yong, S.-P. (2017) A deep learning architecture for classifying medical images of anatomy object. In: UNSPECIFIED.

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Shariff, A.M. (2017) High pressure solubility of carbon dioxide (CO2) in aqueous solution of piperazine (PZ) activated N-methyldiethanolamine (MDEA) solvent for CO2 capture. In: UNSPECIFIED.

Khan, Z. and Yusup, S. and Kamble, P. and Watson, I. (2017) Assessment of Energy Flows in Integrated Catalytic Adsorption (ICA) Steam Gasification for Hydrogen Production. In: UNSPECIFIED.

Khoa, T.H. and Nallagownden, P. and Baharudin, Z. and Dieu, V.N. (2017) One rank cuckoo search algorithm for optimal placement of multiple distributed generators in distribution networks. In: UNSPECIFIED.

Kiu, S.S.K. and Yusup, S. and Chok, V.S. and Taufiq, A. and Kamil, R.N.M. and Syahrullail, S. and Chin, B.L.F. (2017) Comparison on tribological properties of vegetable oil upon addition of carbon based nanoparticles. In: UNSPECIFIED.

Kleyko, D. and Khan, S. and Osipov, E. and Yong, S.-P. (2017) Modality classification of medical images with distributed representations based on cellular automata reservoir computing. In: UNSPECIFIED.

Koh, K.J. and Yasreen, A.Y.M. (2017) On Newton-Raphson formulation and algorithm for displacement based structural dynamics problem with quadratic damping nonlinearity. In: UNSPECIFIED.

Kok, L.Y. and Elamvazuthi, I. and Ramani, K. (2017) Development of a nature inspired algorithm based controller for DC servo motor. In: UNSPECIFIED.

Kose, U. and Vasant, P. (2017) Fading intelligence theory: A theory on keeping Artificial Intelligence safety for the future. In: UNSPECIFIED.

Krishnamurthy, S. and Kannan, R. and Yahya, E.A. and Bingi, K. (2017) Design of FIR filter using novel pipelined bypass multiplier. In: UNSPECIFIED.

Krishnan, S. and Rawindran, H. and Sinnathambi, C.M. and Lim, J.W. (2017) Comparison of various advanced oxidation processes used in remediation of industrial wastewater laden with recalcitrant pollutants. In: UNSPECIFIED.

Ku Yusoff, T.A.I. and Sokiman, M.S. (2017) Sedimentology and geomorphology analysis of coastal area along pantai penarik, terengganu before and during northeast monsoon season. In: UNSPECIFIED.

Kumar, P. and Chee, L.H. and Kang, C.H. and Burhanudin, Z.A. and Saheed, M.S.B.M. (2017) Au-decorated graphene-carbon nanotube hybrid thin film for sub-100 ohm/sq transparent conductive electrodes. In: UNSPECIFIED.

Kumar, P. and Saheed, M.S.B.M. and Burhanudin, Z.A. (2017) Performance comparison of one &two quantum wells light emitting diodes simulated with COMSOL multiphysics. In: UNSPECIFIED.

Kurian, V.J. and Al-Yacouby, A.M. and Khir, A.R.M. (2017) Vortex-Induced Vibration Tests of a Marine Growth Wrapped Cylinder at Subcritical Reynolds Number. In: UNSPECIFIED.

Kurnia, J.C. and Sasmito, A.P. (2017) Heat transfer performance and entropy generation of helical square tubes with various curvature radiuses. In: UNSPECIFIED.

Kurnia, J.C. and Sasmito, A.P. (2017) Numerical investigation of phase change materials thermal capacitor for pipe flow. In: UNSPECIFIED.

Kurnia, J.C. and Sasmito, A.P. and Ping, S.I. (2017) Investigation of Heat Transfer on a Rotating Latent Heat Energy Storage. In: UNSPECIFIED.

Kutty, S.R.M. and Ezechi, E.H. and Khaw, S.G. and Lai, C.L. and Isa, M.H. (2017) Kinetics of heavy metal removal in a suspended and immobilized bioreactors. In: UNSPECIFIED.

Latief, M. and Khorsidtalab, A. and Saputra, I. and Akmeliawati, R. and Nurashikin, A. and Jaswir, I. and Witjaksono, G. (2017) Rapid lard identification with portable electronic nose. In: UNSPECIFIED.

Lavania-Baloo and Idayu, N. and Salihi, I.U. and Zainoddin, J. (2017) The use of macroalgae (Gracilaria changii) as bio-adsorbent for Copper (II) removal. In: UNSPECIFIED.

Lawal, B. and Ali, S.S.A. and Awang, A.B. (2017) Massive MIMO systems for underwater acoustic communication. In: UNSPECIFIED.

Lebelo, R.S. and Mahlobo, R.K. and Adesanya, S.O. and Muthuvalu, M.S. (2017) On Heat Transfer Analysis for a Sphere of Combustible Material of Variable Thermal Conductivity. In: UNSPECIFIED.

Lee, H.C. and Liu, W.-W. and Chai, S.-P. and Mohamed, A.R. and Voon, C.H. and Hashim, U. and Arshad, M.K.M. and Adelyn, P.Y.P. and Huda, A.R.N. and Kahar, S.M. and Hidayah, N.M.S. and Lai, C.W. and Khe, C.-S. (2017) The Impact of Reaction Parameters on Graphene-like Material Synthesized Using Chemical Vapour Deposition. In: UNSPECIFIED.

Lee, H.E. and Liew, M.S. and Zawawi, N.A.W.A. and Toloue, I. (2017) Heave motion prediction of a large barge in random seas by using artificial neural network. In: UNSPECIFIED.

Lee, S.-P. and Mellon, N. and Shariff, A.M. and Leveque, J.-M. (2017) Aromatic Polyamines Covalent Triazine Polymer as Sorbent for CO2 Adsorption. In: UNSPECIFIED.

Lemaitre, G. and Marti, R. and Rastgoo, M. and Meriaudeau, F. (2017) Computer-aided detection for prostate cancer detection based on multi-parametric magnetic resonance imaging. In: UNSPECIFIED.

Leong, Y. and Lo, H. and Drieberg, M. and Sayuti, A.B. and Sebastian, P. (2017) Performance comparison review of 8-3 compressor on FPGA. In: UNSPECIFIED.

Lim, L.G. and Tang, T.B. (2017) Design of concave capacitance sensor for void fraction measurement in gas-liquid flow. In: UNSPECIFIED.

Lim, L.G. and Tang, T.B. and Hamid, N.H. and Pao, W.K.S. (2017) Sinusoid based calibration for holdup measurement in two-phase flow using helical capacitance sensor. In: UNSPECIFIED.

Liu, W.H. and Alwi, S.R.W. and Hashim, H. and Muis, Z.A. and Klemeš, J.J. and Rozali, N.E.M. and Lim, J.S. and Ho, W.S. (2017) Optimal Design and Sizing of Integrated Centralized and Decentralized Energy Systems. In: UNSPECIFIED.

Lock, S.S.M. and Lau, K.K. and Mei, I.L.S. and Shariff, A.M. and Yeong, Y.F. and Bustam, A.M. (2017) Molecular simulation and mathematical modelling of glass transition temperature depression induced by CO2 plasticization in Polysulfone membranes. In: UNSPECIFIED.

Lu, C.-K. and Wang, S. (2017) Peak-triggered sampling circuitry for a fine-structure-aware cochlear implant. In: UNSPECIFIED.

Lun, N.K. and Liew, M.S. and Matori, A.N. and Zawawi, N.A.W.A. (2017) Recent developments in machine learning applications in landslide susceptibility mapping. In: UNSPECIFIED.

Magzoub, M. and Saad, N. and Ibrahim, R. and Irfan, M. (2017) A genetic algorithm optimization of hybrid fuzzy-fuzzy rules in induction motor control. In: UNSPECIFIED.

Mahdi, F.P. and Vasant, P. and Rahman, M.M. and Abdullah-Al-Wadud, M. and Watada, J. and Kallimani, V. (2017) Quantum particle swarm optimization for multiobjective combined economic emission dispatch problem using cubic criterion function. In: UNSPECIFIED.

Mahmood, T. and Naz, M.Y. and Sulaiman, S.A. and Jamil, Y. and Shukrullah, S. and Zahid, M. and Inayat, M. (2017) CFD Modeling and Experimental Validation of a Solar Still. In: UNSPECIFIED.

Mahmoud, L. and Shafiq, N. and Fadhil, M. and Thanoon, W. (2017) Interaction between CFRP side plated to R C beams and concrete under shear action. In: UNSPECIFIED.

Mahzabin, M.S. and Hock, L.J. and Kang, L.S. and Jarghouyeh, E.N. (2017) Performance of mechanical behavior of kenaf fibre reinforced foamed composite. In: UNSPECIFIED.

Majid, M.F.A. and Ismail, M.S. and Rahman, A.H.A. and Mohamed, M.A. (2017) Facies Distribution and Petrophysical Properties of Shoreface-Offshore Transition Environment in Sandakan Formation, NE Sabah Basin. In: UNSPECIFIED.

Malek, M.F.B.A. and Sebastian, P. and Drieberg, M. (2017) Augmented reality assisted localization for indoor navigation on embedded computing platform. In: UNSPECIFIED.

Malik, A.F. and Jeoti, V. and Fawzy, M. and Iqbal, A. and Aslam, Z. and Pandian, M.S. and Marigo, E. (2017) Estimation of SAW velocity and coupling coefficient in multilayered piezo-substrates AlN/SiO2/Si. In: UNSPECIFIED.

Marimuthu, T.A. and Mekbib Atnaw, S. and Mardarveran, P.A. and Shu Yi, S. and Binti Usop, M.A. and Bin Md Gapar, M.K. and Binti Rusdan, S.A. and Ramli, R.B.M. and Sulaiman, S.A. (2017) Design and development of solar desalination plant. In: UNSPECIFIED.

Mat Razali, N.H. and Sulaiman, S.A. and Zaidi Moni, M.N. and Basrawi, M.F. (2017) Pre-treatment of oil palm frond biomass via extensive high temperature drying for gasification process. In: UNSPECIFIED.

Mat-Shayuti, M.S. and Abdullah, M.Z. and Megat-Yusoff, P.S.M. (2017) Tensile Behaviour and Morphology of Polypropylene/Polycar-bonate/Polypropylene-graft-maleic Anhydride Blends. In: UNSPECIFIED.

Mathialagan, R. and Mansor, N. and Al-Khateeb, B. and Mohamad, M.H. and Shamsuddin, M.R. (2017) Evaluation of Allicin as Soil Urease Inhibitor. In: UNSPECIFIED.

Mathulamuthu, S.S. and Asirvadam, V.S. and Dass, S.C. and Gill, B.S. (2017) Cluster based regression model on dengue incidence using dual climate variables. In: UNSPECIFIED.

Mathulamuthu, S.S. and Asirvadam, V.S. and Dass, S.C. and Gill, B.S. (2017) Predicting dengue cases by aggregation of climate variable using manifold learning. In: UNSPECIFIED.

Mathulamuthu, S.S. and Asirvadam, V.S. and Dass, S.C. and Gill, B.S. and Loshini, T. (2017) Predicting dengue incidences using cluster based regression on climate data. In: UNSPECIFIED.

Mathur, N. and Asirvadam, V.S. and Dass, S.C. and Gill, B.S. (2017) Visualization of dengue incidences using expectation maximization (EM) algorithm. In: UNSPECIFIED.

Mazher, M. and Aziz, A.A. and Malik, A.S. (2017) Evaluation of rehearsal effects of multimedia content based on EEG using machine learning algorithms. In: UNSPECIFIED.

McIntyre, D. and Naeem, W. and Ali, S.S.A. and Anwer, A. (2017) Underwater surveying and mapping using rotational potential fields for multiple autonomous vehicles. In: UNSPECIFIED.

Md Hasan, K.N. and Khai, T.X. and Kannan, R. and Zakaria, Z.A. (2017) Harnessing 'Blue energy': A Review on Techniques and Preliminary Analysis. In: UNSPECIFIED.

Mehat, N.M. and Kamaruddin, S. (2017) Evaluation on the feasibility of using bamboo fillers in plastic gear manufacturing via the Taguchi optimization method. In: UNSPECIFIED.

Mehat, N.M. and Mohd Kassim, S. and Kamaruddin, S. (2017) Investigation on the effects of processing parameters on shrinkage behaviour and tensile properties of injection moulded plastic gear via the Taguchi method. In: UNSPECIFIED.

Memon, A.H. and Bin Ibrahim, T. and Nallagowden, P. (2017) Design analysis, optimization and identification of optimum single-phase linear PM generator using different magnet shape for wave energy conversion. In: UNSPECIFIED.

Meriaudeau, F. and Fofi, D. and Demonceaux, C. and Sidibe, D. and Morel, O. and Fougerolle, Y. (2017) From Nowhere to Everywhere. In: UNSPECIFIED.

Mian, M.U. and Dennis, J.O. and Khir, M.H.M. and Sutri, N.Y. and Ahmed, A.Y. and Tang, T.B. (2017) CMOS-MEMS resonator parametric variation analysis through equivalent circuit modeling. In: UNSPECIFIED.

Ming Xiang, L. and Almanna Lubis, L. (2017) Application of Simultaneous Inversion Characterizing Reservoir Properties in X Field, Sabah Basin. In: UNSPECIFIED.

Mkayes, A.A. and Saad, N.M. and Faye, I. and Walter, N. (2017) Image histogram and FFT based critical study on noise in fluorescence microscope images. In: UNSPECIFIED.

Moayedfar, M. and Rani, A.M. and Hanaei, H. and Ahmad, A. and Tale, A. (2017) Parameter optimization and stretch enhancement of AISI 316 sheet using rapid prototyping technique. In: UNSPECIFIED.

Moghaddam, R.N. and Foroozesh, J. (2017) Stress dependent capillary dominated flow in matrix around hydraulic fractures in shale reservoirs and its impact on well deliverability. In: UNSPECIFIED.

Mohamad, H. and Tee, B.P. and Chong, M.F. and Ang, K.A. (2017) Investigation of shaft friction mechanisms of bored piles through distributed optical fibre strain sensing. In: UNSPECIFIED.

Mohammad, S.T. and Al-Kayiem, H.H. and Assadi, M.K. and Gilani, S.I.U. and Khlief, A.K. (2017) Design and modeling of solar parabolic trough power plant with MATLAB. In: UNSPECIFIED.

Mohd Jani, N. and Shakir Nasif, M. and Shafiq, N. and Pao, W. (2017) Thermal and strength performance of reinforced self-compacting concrete slabs mixed with basalt and PVA fibers in high intensity fire. In: UNSPECIFIED.

Mohd Sohor, M.A.H. and Mustapha, M. and Chandra Kurnia, J. (2017) Silicon carbide- from synthesis to application: A review. In: UNSPECIFIED.

Mohd Sohor, M.A.H. and Mustapha, M. and Mamat, O. (2017) Analysis of contributing factors for synthesizing silicon carbide using Taguchi's approach. In: UNSPECIFIED.

Mohd Sohor, M.A.H. and Mustapha, M. and Mamat, O. (2017) The effect of milling duration on silicon dioxide characterization. In: UNSPECIFIED.

Mohd Sumery, N.F. and Lo, S.Z. and Salim, A.M.A. (2017) Lacustrine Environment Reservoir Properties on Sandstone Minerals and Hydrocarbon Content: A Case Study on Doba Basin, Southern Chad. In: UNSPECIFIED.

Mohd Zawawi, M.Z.F. and Elamvazuthi, I. and Aziz, A.A. and Mazlan, S.F. and Ku Abd Rahim, K.N. (2017) Dynamic analysis of three degree of freedom (3-DOF) exoskeleton for lower extremities. In: UNSPECIFIED.

Mokhtar, A.A. and Muhammad, M. and Hussin, H. and Majid, M.A.A. (2017) Assessing performance of aging air-cooled heat exchangers using inspection and performance data. In: UNSPECIFIED.

Mubin, M.A. and Marzuki, A. and Mustaffa, M.T. and Ain, M.F. and Zulkifli, T.Z.A. (2017) Design and simulation of a low-power 0.18 μm CMOS MedRadio band LNA. In: UNSPECIFIED.

Muhammad, M.B. and Sarwar, U. and Tahan, M. and Karim, Z.A.A. (2017) Intelligent fault diagnostic model for rotating machinery. In: UNSPECIFIED.

Muniandy, M. and Sulaiman, S. (2017) Touch sensation as part of multimedia design elements to improve computer accessibility for the blind users. In: UNSPECIFIED.

Mutafi, M. and Nasif, M. and Pao, W. and Ismail, F. (2017) Numerical investigation on the effect of channelled and unchannelled screens on smoke contamination in atriums upper balconies with open upstand. In: UNSPECIFIED.

Mutafi, M.A. and Nasif, M.S. and Pao, W. and Ismail, F.B. (2017) Numerical investigation on the effect of balcony open and solid upstand on smoke contamination in atrium balconies. In: UNSPECIFIED.

Muzammel, M. and Yusoff, M.Z. and Malik, A.S. and Saad, M.N.M. and Meriaudeau, F. (2017) Motorcyclists safety system to avoid rear end collisions based on acoustic signatures. In: UNSPECIFIED.

Muzammel, M. and Yusoff, M.Z. and Malik, A.S. and Saad, M.N.M. and Meriaudeau, F. (2017) Studying the response of drivers against different collision warning systems: A review. In: UNSPECIFIED.

Nadeem, S. and Iqbal, F. and Mutalib, M.I.A. and Abdullah, B. and Shaharun, M.S. (2017) Synthesis and characterization of thermally stable zirconia based mesoporous nanosilica with metalloporphyrin encapsulation. In: UNSPECIFIED.

Naffouti, S.E. and Aouissaoui, I. and Fougerolle, Y. and Sakly, A. and Meriaudeau, F. (2017) Enhancement and assessment of WKS variance parameter for intelligent 3D shape recognition and matching based on MPSO. In: UNSPECIFIED.

Nallagowden, P. and Varma, R. and Memonn, A.H. (2017) Performance improvement of synchronous permanent magnet generator for oscillating water column (OWC) wave energy converter. In: UNSPECIFIED.

Naqvi, S.R. and Naqvi, M. and Noor, T. and Hussain, A. and Iqbal, N. and Uemura, Y. and Nishiyama, N. (2017) Catalytic Pyrolysis of Botryococcus Braunii (microalgae) over Layered and Delaminated Zeolites for Aromatic Hydrocarbon Production. In: UNSPECIFIED.

Naqvi, S.R. and Uemura, Y. and Yusup, S. and Nishiyama, N. and Naqvi, M. (2017) Catalytic Consequences of Micropore Topology on Biomass Pyrolysis Vapors over Shape Selective Zeolites. In: UNSPECIFIED.

Narahari, M. (2017) Buoyancy induced Couette-Poiseuille flow in a vertical microchannel. In: UNSPECIFIED.

Nasaruddin, M.N. and Zung, L.S. and Md Rafek, A.G. (2017) Petrophysical Analysis of E5 sand group of Sokor Formation, Termit Basin, Niger. In: UNSPECIFIED.

Naz, M.Y. and Sulaiman, S.A. and Mahmood, T. and Hussain, M.I. and Ghaffar, A. and Jamil, Y. and Inayat, M. (2017) Heating Performance Study on a Passive Solar Heater. In: UNSPECIFIED.

Ng, C.Y. and John, K.V. (2017) Visualization of 3D Support System for Civil Engineering Students. In: UNSPECIFIED.

Nizamani, Z. and Woan Yih, L. and Wahab, M.M.A. and Mustaffa, Z. (2017) Determination of Correlation for Extreme Metocean Variables. In: UNSPECIFIED.

Noh, N.F.B.M. and Sulaiman, S. and Noor, A.B.M. (2017) Accessibility matters: The need of Bahasa Melayu (BM) screen reader for the visually impaired internet users. In: UNSPECIFIED.

Nordin, N. and Karim, Z.A.A. and Othman, S. and Raghavan, V.R. and Batcha, M.F.M. and Hariri, A. and Basharie, S.M. (2017) Flow characteristics of 3-D turning diffuser using particle image velocimetry. In: UNSPECIFIED.

Nordin, N.A.H.M. and Ismail, A.F. and Misdan, N. and Nazri, N.A.M. (2017) Modified ZIF-8 mixed matrix membrane for CO2/CH4 separation. In: UNSPECIFIED.

Nurhanim, K. and Elamvazuthi, I. and Izhar, L.I. (2017) Effect of muscle activities on gait for the lower extremities. In: UNSPECIFIED.

Nurhanim, K. and Elamvazuthi, I. and Izhar, L.I. and Ganesan, T. (2017) Classification of human activity based on smartphone inertial sensor using support vector machine. In: UNSPECIFIED.

Nurhanim, K. and Elamvazuthi, I. and Izhar, L.I. and Ganesan, T. and Su, S.W. (2017) Development of a model for sEMG based joint-torque estimation using Swarm techniques. In: UNSPECIFIED.

Nurika, O. and Hassan, M.F. and Zakaria, N. and Jung, L.T. (2017) A study of fluctuations in genetic algorithm optimized network in data centre. In: UNSPECIFIED.

Okitsu, J. and Matsuo, T. and Yamamoto, H. and Zabiri, H.B. and Tufa, L.D. and Ramasamy, M. (2017) Cause analysis of representative troubles at distillation tower using discriminant analysis. In: UNSPECIFIED.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Dye solar cell design parameter optimization using Silvaco ATHENA and ATLAS. In: UNSPECIFIED.

Omar, M. and Tarik, M.H.M. and Ibrahim, R. and Abdullah, M.F. (2017) Suitability study on using rowen's model for dry-low emission gas turbine operational performance. In: UNSPECIFIED.

Palaniappan, T. and Saman, N. and Mat, H. and Johari, K. (2017) Synthesis and characterization of sulfur-functionalized silica nanocapsules as mercury adsorbents. In: UNSPECIFIED.

Pampouchidou, A. and Simantiraki, O. and Vazakopoulou, C.-M. and Chatzaki, C. and Pediaditis, M. and Maridaki, A. and Marias, K. and Simos, P. and Yang, F. and Meriaudeau, F. and Tsiknakis, M. (2017) Facial geometry and speech analysis for depression detection. In: UNSPECIFIED.

Pao, W. and Hon, L. and Saieed, A. and Ban, S. (2017) Numerical simulation of two-phase slug flow with liquid carryover in different diameter ratio T-junction. In: UNSPECIFIED.

Parimi, A.M. and Elamvazuthi, I. and Kumar, A.V.P. and Cherian, V. (2017) Fuzzy logic based control for IPFC for damping low frequency oscillations in multimachine power system. In: UNSPECIFIED.

Pedapati, S.R. and Paramaguru, D. and Awang, M. (2017) Microhardness and microstructural studies on underwater Friction Stir Welding of 5052 Aluminum Alloy. In: UNSPECIFIED.

Pedapati, S.R. and Shasidaran and Kamal, S. and Rani, A.M.A. (2017) Optimum welding parameter for GMA welding using soft computing techniques. In: UNSPECIFIED.

Permatasari, K.A. and Reekhi, G.S. and Irawan, S. and Lubis, L.A. (2017) Resistivity wave for monitoring foam flood propagation. In: UNSPECIFIED.

Perumal, V. and Mohamed, N.M. and Saheed, M.S.M. and Saheed, M.S.M. (2017) Template-assisted growth of highly oriented 3D graphene pH sensor towards new avenues for biosensor. In: UNSPECIFIED.

Plucar, J. and Grunt, O. and Vasant, P. and Zelinka, I. (2017) Modelling business processes using evolutionary generated petri nets. In: UNSPECIFIED.

Ponnusamy, V. and Jung, L.T. and Ramachandran, T. and Zaman, N. (2017) Bio-inspired energy scavenging in wireless ad hoc network. In: UNSPECIFIED.

Purnomo, E.W. and Ghosh, D.P. (2017) Enhancing Thin-Pay Estimation through Stochastic Simultaneous Inversion. In: UNSPECIFIED.

Qayyum, A. and Malik, A.S. and Shuaibu, A.N. and Nasir, N. (2017) Estimation of non-contact smartphone video-based vital sign monitoring using filtering and standard color conversion techniques. In: UNSPECIFIED.

Rabih, A.A.S. and Dennis, J.O. and Khir, M.H.Md. and Ahmed, M.G. (2017) Study of damping effect on CMOS-MEMS resonator for biomarker detection in exhaled breath. In: UNSPECIFIED.

Rabih, A.A.S. and Khir, M.H.M. and Ahmed, A.Y. and Mian, M.U. and Dennis, J.O. and Ahmed, M.G.A. and Abdulgadir, A.-A.I. (2017) MetalMUMPs resonator for acetone vapor sensing. In: UNSPECIFIED.

Radzi, S.S.M. and Asirvadam, V.S. and Dass, S.C. and Hutapea, D.K.Y. (2017) Evaluation of simulated VEP signals on basis of Higuchi and Katz's algorithm. In: UNSPECIFIED.

Rahimi, F. and Lemma, T.A. (2017) Gas turbine fault diagnostics using fuzzy systems. In: UNSPECIFIED.

Rahman, Z.H.A. and Khir, M.H.Md. and Burhanudin, Z.A. (2017) Modeling and simulation analysis of micro thermoelectric generator. In: UNSPECIFIED.

Rahmawati, Y. and Utomo, C. (2017) Value-based decision for highest and best use. In: UNSPECIFIED.

Ramli, A.S. and Basrawi, F. and Daing Idris, D.M.N. and Bin Yusof, M.H. and Khalil Ibrahim, T. and Mustafa, Z. and Sulaiman, S.A. (2017) A new dewatering technique for stingless bees honey. In: UNSPECIFIED.

Rasheed, W. and Bhatti, M.S. and Hisham Bin Hamid, N. and Tang, T.B. and Idris, Z. (2017) Moderate traumatic brain injury identification for MEG data using PU (Positive and Unseen) learning. In: UNSPECIFIED.

Rasheed, W. and Tang, T.B. and Hamid, N.H. (2017) Threshold for computing generalized model of default mode network connectivity. In: UNSPECIFIED.

Rashid, R. and Perumal, N. and Elamvazuthi, I. and Tageldeen, M.K. and Khan, M.K.A.A. and Parasuraman, S. (2017) Mobile robot path planning using Ant Colony Optimization. In: UNSPECIFIED.

Rashid, Z. and Wilfredand, C.D. and Murugesan, T. (2017) Effect of hydrophobic ionic liquids on petroleum asphaltene dispersion and determination using UV-visible spectroscopy. In: UNSPECIFIED.

Rashidi, A. and Abdullah, Z. and Kashif, S. (2017) Study on the fluid dynamics of nitrogen and hydrogen gases subjected to wires element in monolithic channel. In: UNSPECIFIED.

Rasool, F. and Drieberg, M. and Badruddin, N. and Singh, B. and Singh, M. (2017) Modeling of PV panels performance based on datasheet values for solar micro energy harvesting. In: UNSPECIFIED.

Rauf, M. and Yahya, N. and Sagayan, V. and Nyamasvisva, T.E. and Rostami, A. (2017) Improved hydrocarbon reservoir detection using enhanced transmitter. In: UNSPECIFIED.

Ravichandar, S. and Wilfred, C.D. and Chong, F.K. and Ng, Z.G. (2017) Synthesis, characterization and application of 1-(2-cyanoethyl)-3-(3-methoxypropane)imidazolium bromide for CO2 capture. In: UNSPECIFIED.

Rawindran, H. and Krishnan, S. and Sinnathambi, C.M. (2017) A Review on overboard CEOR discharged produced water treatment and remediation. In: UNSPECIFIED.

Razip, H. and Zakaria, M.N. (2017) Combining approximation algorithm with genetic algorithm at the initial population for NP-complete problem. In: UNSPECIFIED.

Raziqin, A. and John, K.V. and Yee, N.C. (2017) Effect of Sacrificial Anodes on Hydrodynamic Coefficients of Jacket Members Subjected to Regular Waves. In: UNSPECIFIED.

Rehman, M. and Safdar, S. and Mahmood, A.K. and Amin, A. and Salleh, R. (2017) Personality traits and knowledge sharing behavior of software engineers. In: UNSPECIFIED.

Rehman, M.Z.U. and Baharudin, Z. and Zakariya, M.A. and Khir, M.H.M. (2017) Development of 7 GHz bowtie shaped substrate integrated waveguide bandpass filter with emphasis on inter-resonator coupling. In: UNSPECIFIED.

Riman, N.I.S. and Abdullah, M.F. and Romlie, M.F. and Baharudin, Z. (2017) The third harmonic current contribution during three-phase to ground fault. In: UNSPECIFIED.

Romastarika, R. and Jaya, R.P. and Yaacob, H. and Nazri, F.M. and Agussabti and Ichwana and Jayanti, D.S. (2017) Effect of black rice husk ash on the physical and rheological properties of bitumen. In: UNSPECIFIED.

Rosdi, N.T.A.M. and May, Z. and Faye, I. and Nasir, M.H. (2017) Hep-2 cell feature extraction using wavelet and independent component analysis. In: UNSPECIFIED.

Rosidi, A. and Ginta, T.L. and Abdul Rani, A.M.B. (2017) Optimization of bone drilling parameters using Taguchi method based on finite element analysis. In: UNSPECIFIED.

Roslan, N.S. and Amin, H.U. and Izhar, L.I. and Saad, M.N.M. and Sivapalan, S. (2017) Role of EEG delta and beta oscillations during problem solving tasks. In: UNSPECIFIED.

Rosli, M.A. and Ali, A. and Yahaya, N.Z. (2017) Development of RF energy harvesting technique for Li-Fi application. In: UNSPECIFIED.

Rosli, N. and Ibrahim, R. and Ismail, I. and Hassan, S.M. and Chung, T.D. (2017) Neural network architecture selection for efficient prediction model of gas metering system. In: UNSPECIFIED.

Rosli, N.S. and Ibrahim, R. and Ismail, I. (2017) Neural network model with particle swarm optimization for prediction in gas metering systems. In: UNSPECIFIED.

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2017) Proactive job scheduling and migration using artificial neural networks for volunteer grid. In: UNSPECIFIED.

Rusli, E.F. and Aziz, I.A. and Jaafar, J. and Haron, N. and Qaiyum, S. and Ali, N.F. (2017) Pipeline leakage alert system with water displacement detection. In: UNSPECIFIED.

Sabet, M. and Soleimani, H. (2017) The impact of electron beam irradiation on Low density polyethylene and Ethylene vinyl acetate. In: UNSPECIFIED.

Sadig, H. and Sulaiman, S.A. and Zaidi Moni, M.N. and Anbealagan, L.D. (2017) Characterization of date palm frond as a fuel for thermal conversion processes. In: UNSPECIFIED.

Saeidi, T. and Bin Ismail, I. and Saleh, V. and Alhawari, A.R.H. (2017) Triple band modified 90 degree Koch fractal H-slot microstrip antenna. In: UNSPECIFIED.

Saeidi, T. and Bin Ismail, I. and Zakariya, M.A. and Alhawari, A.R.H. (2017) Harmonic control of triple-band microstrip antenna using photonic band gap approach. In: UNSPECIFIED.

Safdar, S. and Akbar, R. and Hassan, M.F. and Sharef, B.T. and Hajjar, K. and Qureshi, M.A. (2017) Mechanism to continue system availability during cyber threat scenario. In: UNSPECIFIED.

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Perumal, V. and Saheed, M.S.M. (2017) DC magnetron sputtered TiO2 thin film as efficient hole blocking layer for perovskite solar cell. In: UNSPECIFIED.

Said, M.A. and Hassan, S. and Nor, M.F.M. (2017) Experimental Investigation of Micro-Gas Turbine Performance at Reduced Air Inlet Temperature. In: UNSPECIFIED.

Saieed, A. and Pao, W. and Hashim, F.M. and Norpiah, R.B.M. (2017) Numerical study of gas-liquid flow maldistribution in a T-junction having very small diameter ratio. In: UNSPECIFIED.

Sakidin, H. and Sudhakaran, P. and Saad, M.S. and Rozali, S.S. and Nasarudin, A.H. and Almashhor, A.A. (2017) Development of eco-friendly washing machine. In: UNSPECIFIED.

Salihi, I.U. and Kutty, S.R.M. and Isa, M.H. (2017) Adsorption of Lead ions onto Activated Carbon derived from Sugarcane bagasse. In: UNSPECIFIED.

Salleh, S.N.M. and Zainon, N.M. and Abdullah, M.Z. (2017) The effect of oleic acid as post spinning treatment on tensile strength of polyacrylonitrile fibers. In: UNSPECIFIED.

Saman, A.B.S.H.M. and Lotfy, A.H. (2017) An implementation of SLAM with extended Kalman filter. In: UNSPECIFIED.

Sang, W.Y. and Ching, O.P. (2017) Tailoring MCM-41 mesoporous silica particles through modified sol-gel process for gas separation. In: UNSPECIFIED.

Sarang, S. and Drieberg, M. and Awang, A. (2017) Multi-priority based QoS MAC protocol for wireless sensor networks. In: UNSPECIFIED.

Savita, K.S. and Muniandy, M. and Ain, Z.N. and Mehat, M. (2017) A mobile based environmental education for primary schoolchildren in Malaysia. In: UNSPECIFIED.

Senivasan, S. and Drieberg, M. and Singh, B.S.M. and Sebastian, P. and Hiung, L.H. (2017) An MPPT micro solar energy harvester for wireless sensor networks. In: UNSPECIFIED.

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2017) Biologically inspired network on chip fault tolerant algorithm using time division multiplexing. In: UNSPECIFIED.

Shafie, S.N.A. and Man, Z. and Idris, A. (2017) Development of polycarbonate-silica matrix membrane for CO2/CH4 separation. In: UNSPECIFIED.

Shafiq, N. and Nuruddin, M.F. (2017) Effectiveness of adhesive bonding in structural steel connections. In: UNSPECIFIED.

Shah, S.N.M. and Mahmood, A.K. and Rubab, S. and Hassan, M.F. (2017) Experimental performance analysis of job scheduling algorithms on computational grid using real workload traces. In: UNSPECIFIED.

Shaharizal, S. and Ahmad, M.R. and Hawari, H.F. (2017) Design and analysis of a hybrid energy harvester for self-powered sensor. In: UNSPECIFIED.

Shaheen, A.-U.-R. and Hussin, F.A. and Hamid, N.H. (2017) False path identification algorithm framework for nonseparable controller-data path circuits. In: UNSPECIFIED.

Shahid, M.U. and Mohamed, N.M. and Khatani, M. and Muhsan, A.S. and Samsudin, A. and Irshad, M.I. and Zaine, S.N.A. (2017) Graphene modified FTO/TiO2 interface photoelectrode for improved performance of dye sensitized solar cells. In: UNSPECIFIED.

Shamshirgaran, S.R. and Assadi, M.K. and Al-Kayiem, H.H. and Sharma, K.V. (2017) Investigation of thermal behaviour, pressure drop, and pumping power in a Cu nanofluid-filled solar flat-plate collector. In: UNSPECIFIED.

Shamsuddin, A. (2017) Structural Analysis: Folds Classification of metasedimentary rock in the Peninsular Malaysia. In: UNSPECIFIED.

Shamsuddin, A. and Ghosh, D. and Shahar, S. (2017) Geological features based on Spectral Decomposition: Techniques and examples from the Malay Basin. In: UNSPECIFIED.

Shamsuddin, R.M. and Borhan, A. and Lim, W.K. (2017) Humic acid batteries derived from vermicomposts at different C/N ratios. In: UNSPECIFIED.

Shamsuddin, S.Z. and Hermana, M. and Ghosh, D.P. and Salim, A.M.A. (2017) Reducing Uncertainties in Hydrocarbon Prediction through Application of Elastic Domain. In: UNSPECIFIED.

Shannan, N.M. and Yahaya, N.Z. and Singha, B. and Salam, Z. and Ahmed, K.Y. (2017) Theoretical analysis of the series parasitic resistance in photovoltaic cell. In: UNSPECIFIED.

Shariffudin, K.A. and Karuppanan, S. and Patil, S.S. (2017) Finite element analysis of residual stress in cold expanded plate with different thickness and expansion ratio. In: UNSPECIFIED.

Shbier, M.Z. and Ku-Mahamud, K.R. and Othman, M. (2017) SWGARCH model for time series forecasting. In: UNSPECIFIED.

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. (2017) Effect of Unbalanced Voltage Supply Diagnosis Through Rotor Harmonics Signature and State Transitions. In: UNSPECIFIED.

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. and Bin Hamdan, M.F. (2017) A new method for detection of unbalanced voltage supply through rotor harmonics and symbolic state dynamics. In: UNSPECIFIED.

Shoaib, M. and Hamid, N.H. and Jan, M.T. and Ali, N.B.Z. (2017) Effects of edge cracks on the dynamics of piezoelectric cantilever based MEMS sensor. In: UNSPECIFIED.

Shuaibu, A.N. and Malik, A.S. and Faye, I. (2017) Adaptive feature learning CNN for behavior recognition in crowd scene. In: UNSPECIFIED.

Shuaibu, A.N. and Malik, A.S. and Faye, I. (2017) Behavior representation in visual crowd scenes using space-time features. In: UNSPECIFIED.

Shuaibu, A.N. and Malik, A.S. and Faye, I. and Ali, Y.S. (2017) Pedestrian group attributes detection in crowded scenes. In: UNSPECIFIED.

Shukla, V. and Hussin, F.A. and Hamid, N.H. and Ali, N.B.B.Z. (2017) Investigation of capacitance dependence on droplet volume in MEDA based biochips. In: UNSPECIFIED.

Singh, D. and Ismail, F.B. and Shakir Nasif, M. (2017) Hybrid Intelligent Warning System for Boiler tube Leak Trips. In: UNSPECIFIED.

Singh, K.S.M.J. and Elamvazuthi, I. and Shaari, K.Z.K. and Lima, F.V. (2017) PID tuning control strategy using Cuckoo search algorithm for pressure plant. In: UNSPECIFIED.

Singh, K.S.M.J. and Elamvazuthi, I. and Shaari, K.Z.K. and Perumal, N. (2017) Development of PID controller tuning tool based on cuckoo search algorithms. In: UNSPECIFIED.

Singh, N. and Jangra, A. and Elamvazuthi, I. and Kashyap, K. (2017) Healthcare data privacy measures to cure & care cloud uncertainties. In: UNSPECIFIED.

Singh, V. and Elamvazuthi, I. and Jeoti, V. and George, J. and Kumar, D. (2017) Clinical assessment of injured ankle ATFL ligaments based on ultrasound imaging in the athletes. In: UNSPECIFIED.

Socheatra, S. and Wen, W.P. and Cheong, L.Y. (2017) Dual-band bandstop filter based on predistortion hybrid reflection function. In: UNSPECIFIED.

Sovann, N. and Nallagownden, P. and Baharudin, Z. (2017) Electricity load forecasting using hybrid wavelet neural network based on parallel prediction method. In: UNSPECIFIED.

Sovuthy, C. and Wen, W.P. and Osman, A.F. (2017) High Q realization of quasi dual-mode dual band bandpass filter. In: UNSPECIFIED.

Strubel, D. and Morel, O. and Saad, N.M. and Fofi, D. (2017) Evolutionary algorithm for positioning cameras networks mounted on UAV. In: UNSPECIFIED.

Subekti, S. and Bayuaji, R. and Darmawan, M.S. and Husin, N.A. and Wibowo, B. and Anugraha, B. and Irawan, S. and DIbiantara, D. (2017) Review: Potential strength of fly ash-based geopolymer paste with substitution of local waste materials with higherature effect. In: UNSPECIFIED.

Subhani, A.R. and Malik, A.S. and Kamil, N. and Naufal, M. and Saad, M. (2017) Using resting state coherence to distinguish between low and high stress groups. In: UNSPECIFIED.

Subhani, A.R. and Mumtaz, W. and Kamil, N. and Saad, N.M. and Nandagopal, N. and Malik, A.S. (2017) MRMR based feature selection for the classification of stress using EEG. In: UNSPECIFIED.

Sulaiman, S.A. and Mat Razali, N.H. and Zaidi Bin Moni, M.N. and Inayat, M. (2017) Pre-treatment of oil palm fronds biomass for gasification. In: UNSPECIFIED.

Sulaiman, S.A. and Zakeria, A.F. and Ramely, M.F. and Zaidi Moni, M.N. and Basrawi, M.F. (2017) Effect of ventilation on thermal comfort in campus hostel bedrooms after sunset. In: UNSPECIFIED.

Suleman, H. and Maulud, A.S. and Man, Z. (2017) Experimental measurement and thermodynamic modeling of the solubility of carbon dioxide in aqueous blends of monoethanolamine and diethanolamine. In: UNSPECIFIED.

Sultan, N.S.H. and Chellappan, L.K. and Hamzah, W.S.W. and Marc, L.J. and Mutalib, M.I.A. (2017) Synthesis and application of dual functionalized task specific ionic liquid for bamboo dissolution. In: UNSPECIFIED.

Suman, S. and Hussin, F.A. and Walter, N. and Malik, A.S. and Hilmi, I. (2017) Automatic detection and removal of bubble frames from wireless capsule endoscopy video sequences. In: UNSPECIFIED.

Suman, S. and Hussin, F.A.B. and Malik, A.S. and Pogorelov, K. and Riegler, M. and Ho, S.H. and Hilmi, I. and Goh, K.L. (2017) Detection and classification of bleeding region in WCE images using color feature. In: UNSPECIFIED.

Suman, S. and Hussin, F.A.B. and Walter, N. and Malik, A.S. and Ho, S.H. and Goh, K.L. (2017) Detection and classification of bleeding using statistical color features for wireless capsule endoscopy images. In: UNSPECIFIED.

Supramaniam, T. and Ibrahim, R. and Chung, T.D. and Hassan, S.M. (2017) Towards the development of WirelessHART adaptor for process control applications. In: UNSPECIFIED.

Supramaniam, T. and Ibrahim, R. and Hassan, S.M. and Bingi, K. (2017) Development of WirelessHART adapter with industrial transmitter for process monitoring. In: UNSPECIFIED.

Surendiran, S. and Thangavel, S. and Kannan, R. (2017) Optimization of PID controller parameters in interconnected power system using index curve based technique. In: UNSPECIFIED.

Tageldeen, M.K. and Elamvazuthi, I. and Perumal, N. and Ganesan, T. (2017) A virtual reality based serious games for rehabilitation of arm. In: UNSPECIFIED.

Tageldeen, M.K. and Elamvazuthi, I. and Perumal, N. and Ganesan, T. and Borboni, A. (2017) Development of a 3D virtual platform for an upper arm robotic exoskeleton. In: UNSPECIFIED.

Tageldeen, M.K. and Perumal, N. and Elamvazuthi, I. and Ganesan, T. (2017) Design and control of an upper arm exoskeleton using Fuzzy logic techniques. In: UNSPECIFIED.

Tan, P.H. and Mohd Yassin, A.Y. (2017) Mixed Finite Element Formulation for Magnetic Fluid Oil Flow in Electromagnetic Field. In: UNSPECIFIED.

Tarik, M.H.M. and Omar, M. and Abdullah, M.F. and Ibrahim, R. (2017) Modelling of dry low emission gas turbine using black-box approach. In: UNSPECIFIED.

Tarmizi, W.F. and Elamvazuthi, I. and Perumal, N. and Nurhanim, K. and Khan, M.K.A.A. and Parasuraman, S. and Nandedkar, A.V. (2017) A Particle Swarm Optimization-PID controller of a DC Servomotor for Multi-Fingered Robot Hand. In: UNSPECIFIED.

Teh, C. and Aziz, A. and Elamvazuthi, I. and Man, Z. (2017) Classification of bearing faults using extreme learning machine algorithm. In: UNSPECIFIED.

Teh, H.M. and Philip, A.K. and Jaafar, A. and Shafiai, S.H. and Sahimy, M.R.M. and Rashidi, A.H.M. (2017) Impingement of NEWTONIAN and non-Newtonian dry-bed bores on a vertical structure. In: UNSPECIFIED.

Teoh, C.S. and Mahmood, A.B. and Dzazali, S.B. (2017) Is NIST CSF applicable for developing nations? A case study on Government Sector in Malaysia. In: UNSPECIFIED.

Teoh, C.S. and Mahmood, A.K. (2017) National cyber security strategies for digital economy. In: UNSPECIFIED.

Thangasamy, V. and Kamsani, N.A. and Zulkifli, T.Z.A. (2017) Switching power control for multimode multiband power amplifier. In: UNSPECIFIED.

Theng, S.G. and Jumbri, K.B. and Wirzal, M.D.H. (2017) Molecular dynamics simulation of membrane in room temperature ionic liquids. In: UNSPECIFIED.

Thiruchelvam, L. and Asirvadam, V.S. and Dass, S.C. and Daud, H. and Gill, B.S. (2017) K-step ahead prediction models for dengue occurrences. In: UNSPECIFIED.

Toh, Y.L. and Lin, C.-H. and Wong, P.W. and Kuo, J.-T. (2017) Implementation of second-order open-loop resonator filter with skew-symmetric input/output coupling structure. In: UNSPECIFIED.

Tyng, C.M. and Amin, H.U. and Malik, A.S. and Saad, M.N.M. (2017) EEG spectral analysis and functional connectivity during learning of science concepts. In: UNSPECIFIED.

Uemura, Y. and Tran, N.T.T. and Naqvi, S.R. and Nishiyama, N. (2017) Nano-catalysts for upgrading bio-oil: Catalytic decarboxylation and hydrodeoxygenation. In: UNSPECIFIED.

Ul Haq Gilani, S.F. and Ibrahim, R. and Khir, M.H.M. (2017) A case study for industrial centrifugal pump as a vibration source for macro-scale electromagnetic energy harvesting. In: UNSPECIFIED.

Ullah, R. and Md Said, A.B. and Jaafar, J. and Saleem, M.Q. (2017) Semantic Space Expansion and Refinement. In: UNSPECIFIED.

Umar, A.A. and Negash, B.M. and Saaid, I.M. and Sulaimon, A.A. and Pilus, R.M. and Shahpin, H.B.A. and Mohamed, A.S. (2017) Effects of selected process variables on the stability of petroleum emulsions co-stabilized by carbon black and surfactant. In: UNSPECIFIED.

Umar, M.W. and Yahaya, N.B. and Baharuddin, Z.B. (2017) Design and simulation of DC-DC converter for automobile LED front lighting applications. In: UNSPECIFIED.

Umar, M.W. and Yahya, N. and Baharuddin, Z. and Ibrahim, O. (2017) Digital signal controller based control of high-brightness LED switching converters. In: UNSPECIFIED.

Ung, W.C. and Tang, T.B. and Meriaudeau, F. and Ebenezer, E.G.M. (2017) Dynamic optimization of mental workload in fNIRS-BCI system for cognitive rehabilitation. In: UNSPECIFIED.

Utomo, C. and Rahmawati, Y. and Pararta, D.L. and Ariesta, A. (2017) Collaborative decision model on stockpile material of a traditional market infrastructure using value-based HBU. In: UNSPECIFIED.

Vandrangi, S.K. and Hassan, S.B. and Sharma, K.V. and Reddy, P. (2017) Comparison of nanofluid heat transfer properties with theory using generalized property relations for EG-water mixture. In: UNSPECIFIED.

Vantuch, T. and Zelinka, I. and Vasant, P. (2017) Market prices trend forecasting supported by Elliott Wave's theory. In: UNSPECIFIED.

Wagan, A.A. and Jung, L.T. (2017) Distributed dynamic mobility management scheme for network mobility. In: UNSPECIFIED.

Wagan, A.A. and Jung, L.T. (2017) Multilevel hybrid mobility management scheme for NEMO. In: UNSPECIFIED.

Wan Yusof, K. and Mujahid Muhammad, M. and Raza Ul Mustafa, M. and Azazi Zakaria, N. and Gahani, A.A. (2017) Analysis of Manning's and Drag Coefficients for Flexible Submerged Vegetation. In: UNSPECIFIED.

Wen, S.J. and Rabat, N.E. and Osman, N. (2017) Synthesis and characterization of oil palm empty fruit bunch- grafted -polyvinyl alcohol (OPEFB-g-PVA) hydrogel for removal of copper ions from aqueous solution. In: UNSPECIFIED.

Witjaksono, G. and Hussin, N.H.F.B.M. and Rabih, A.A.S. and Alfa, S. (2017) Real time chromametry measurement for food quality detection using mobile device. In: UNSPECIFIED.

Witjaksono, G. and Saputra, I. and Latief, M. and Jaswir, I. and Akmeliawati, R. and Abdelkreem Saeed Rabih, A. (2017) Non-Halal biomarkers identification based on Fourier Transform Infrared Spectroscopy (FTIR) and Gas Chromatography-Time of Flight Mass Spectroscopy (GC-TOF MS) techniques. In: UNSPECIFIED.

Xiaoming, Z. and Aoki, H. and Sato, A. and Majid, M.A.A. (2017) An empirical study on performance optimization at district cooling plant of Universiti Teknologi PETRONAS. In: UNSPECIFIED.

Yahya, A.A. and Ali, N. and Mohd Kamal, N.L. and Shahidan, S. and Beddu, S. and Nuruddin, M.F. and Shafiq, N. (2017) Reducing Heavy Metal Element from Coal Bottom Ash by Using Citric Acid Leaching Treatment. In: UNSPECIFIED.

Yahya, E.A. and Kannan, R. and Baharudin, Z. and Krishnamurthy, S. (2017) An overview of instanteneous radiation effect on MOSFETs for harsh environment applications. In: UNSPECIFIED.

Yahya, N.H.B. and Yeong, Y.F. and Lai, L.S. (2017) Synthesis of Amino-Impregnated ZIF-8 for CO2 Adsorption. In: UNSPECIFIED.

Yasir, M. and Amir, N.B. and Ahmad, F. and Rodzhan, N.S. (2017) Effect of basalt fibres reinforcement and aluminum trihydrate on the thermal properties of intumescent fire retardant coatings. In: UNSPECIFIED.

Yau, X.H. and Khe, C.S. and Liu, W.W. and Lai, C.W. and Oo, Z. (2017) Synthesis and application of surfactants coated magnetite nanoparticles for demulsification of crude oil in water emulsion. In: UNSPECIFIED.

Yin, H. and Shirai, K. and Teo, W. (2017) Numerical Assessment of Ultra-high Performance Concrete Material. In: UNSPECIFIED.

Yousuff, C.M. and Hamid, N.H.B. and Hussain, K.I. and Ho, E.T.W. (2017) Numerical modelling and simulation of dielectrophoretic based WBC sorting using sidewall electrodes. In: UNSPECIFIED.

Zafar, F. and Mandal, P.C. and Shaari, K.Z.B.K. and Nadeem, S. (2017) Total acid number reduction kinetics of naphthenic acids using non-catalytic subcritical methanol. In: UNSPECIFIED.

Zafar, R. and Malik, A.S. and Shuaibu, A.N. and Javvad Ur Rehman, M. and Dass, S.C. (2017) Classification of fMRI data using support vector machine and convolutional neural network. In: UNSPECIFIED.

Zafar, R. and Malik, A.S. and Shuaibu, A.N. and Javvad Ur Rehman, M. and Dass, S.C. (2017) Multiple trials in event related fMRI for different conditions. In: UNSPECIFIED.

Zaffar, M. and Hashmani, M.A. and Savita, K.S. (2017) Performance analysis of feature selection algorithm for educational data mining. In: UNSPECIFIED.

Zahari, M.K. and Ahmad, B.H. and Wong, P.W. and Shairi, N.A. (2017) Switchable bandstop to bandpass filter using parallel-coupled resonator. In: UNSPECIFIED.

Zahid, M.S.M. and Isyaku, B. and Fadzil, F.A. (2017) Recovery of software defined network from multiple failures: Openstate vs openflow. In: UNSPECIFIED.

Zahraa, A. and Zailani, A. and Ghosh, D.P. (2017) Characterizing Geological Facies using Seismic Waveform Classification in Sarawak Basin. In: UNSPECIFIED.

Zahraee, S.M. and Khalaji Assadi, M. and Bayat, S. and Bakhoda, S. (2017) Energy efficient of the residential buildings based climatic condition using experimental design a case study in malaysia. In: UNSPECIFIED.

Zaidi, K.S. and Jeoti, V. and Awang, A. and Drieberg, M. (2017) High reliability using virtual MIMO based mesh network for maritime wireless communication. In: UNSPECIFIED.

Zaidi, K.S. and Jeoti, V. and Drieberg, M. and Awang, A. and Iqbal, A. (2017) Long-range mobile communication over sea utilizing evaporation duct. In: UNSPECIFIED.

Zainab Habib, N. and Kamaruddin, I. and Tan, I.M. and Komiyama, M. (2017) Investigation on the effect of phase segregation on the mechanical properties of polymer modified bitumen using analytical and morphological tools. In: UNSPECIFIED.

Zainal Abidin, N.S. and Raymond, R.R. and Bashah, N.S.I. (2017) Diagenetic history of late Oligocene-early Miocene carbonates in East Sabah, Malaysia. In: UNSPECIFIED.

Zainol, M.Z. and Romlie, M.F. and Jalil, M.R.A. and Yahaya, N.Z. and Zainol, I. and Ghani, M.F. and Jasri, M.A.H.M. (2017) Design and analysis of a contactless battery charger with planar PCB windings. In: UNSPECIFIED.

Zainuddin, N. and Ibrahim, Z.B. (2017) Block method for third order ordinary differential equations. In: UNSPECIFIED.

Zakaria, S.Z. and Aziz, A.A. and Drieberg, M. (2017) Multi-hop wireless sensor network for remote monitoring of soil moisture. In: UNSPECIFIED.

Zamri, N.A.M. and Ibrahim, T. and Nor, N.M. (2017) Optimization of linear generator designs for wave energy converter (WEC) system in Malaysia. In: UNSPECIFIED.

Zawawi, M.Z.F.B.M. and Elamvazuthi, I. and Aziz, A.B.A. and Daud, S.A. (2017) Comparison of PID and fuzzy logic controller for DC servo motor in the development of lower extremity exoskeleton for rehabilitation. In: UNSPECIFIED.

Zelinka, I. and Vasant, P. and Dao, T.T. and Hoang, D.V. (2017) A novell approach on evolutionary dynamics analysis - A progress report. In: UNSPECIFIED.

Zubir, W.M.A.M. and Aziz, I.A. and Jaafar, J. (2017) A survey on textual semantic classification algorithms. In: UNSPECIFIED.

Zuki, F.S.M. and Sulaiman, S. (2017) Investigating sensory modalities in fatigue driver warning systems. In: UNSPECIFIED.

Zuki, F.S.M. and Sulaiman, S. (2017) Using multimodal warning as a method of optimizing an in-vehicle warning system. In: UNSPECIFIED.

Zulkarnain, N.F. and Ibrahim, T. and Romlie, M.F. (2017) Design and optimization of permanent magnet machine for ceiling fan. In: UNSPECIFIED.

Zulkefli, N.A.B.M. and Rasli, R.B.M. and Baharudin, B.B. (2017) Trusted Data Travel Blogs Information Focusing on Followers. In: UNSPECIFIED.

Zulkepli, S.N.I.S. and Hamid, N.H. and Shukla, V. (2017) A low cost open droplet-based microfluidic devices on printed circuit board. In: UNSPECIFIED.

Zulkifli, S.A. and Dali, M.A.M. (2017) Development of vehicle powertrain simulation module by interfacing Matlab-ADVISOR to LabVIEW. In: UNSPECIFIED.

Zulkifli, T.Z.A. and Marzuki, A. and Murad, S.A.Z. (2017) UWB CMOS low noise amplifier for mode 1. In: UNSPECIFIED.

Zulkifly, M.A.A. and Yahya, N. (2017) Relative spectral-perceptual linear prediction (RASTA-PLP) speech signals analysis using singular value decomposition (SVD). In: UNSPECIFIED.