A

AL-Qutami, T.A. and Ibrahim, R. and Ismail, I. and Ishak, M.A. (2017) Development of soft sensor to estimate multiphase flow rates using neural networks and early stopping. International Journal on Smart Sensing and Intelligent Systems, 10 (1). pp. 199-222. ISSN 11785608

Ab. Rahim, L. and Aliyu, Z. and Mustapha, E.E. (2017) Evaluating the usability of model transformations testing approach (MTTA). Journal of Computer Science, 13 (1). pp. 11-21. ISSN 15493636

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2017) Experimental investigation of energy absorption of partially wrapped thin-walled aluminium-glass/epoxy tube subjected to quasi-static loading. Materials Science Forum, 904 MS. pp. 61-67. ISSN 02555476

Abbas, T. and Ya, H.H. and Zaki, M. (2017) The effect of fiber angles on energy absorption of 50 partially wrapped aluminium-composite hybrid tube under axial crushing : Die Wirkung von Faserwinkeln auf die Energieabsorption von 50 teil-umhülltem Aluminium-Verbund-Hybridrohr unter axialer Stauchung. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 267-272. ISSN 09335137

Abbasi, A. and Hashim, F.M. (2017) Development of a hydrate formation prediction model for sub-sea pipeline. Petroleum Science and Technology, 35 (5). pp. 443-450. ISSN 10916466

Abbasi, A.Z. and Ting, D.H. and Hlavacs, H. (2017) Engagement in games: Developing an instrument to measure consumer videogame engagement and its validation. International Journal of Computer Games Technology, 2017. ISSN 16877047

Abbasi, A.Z. and Ting, D.H. and Hlavacs, H. (2017) Playful-consumption experience in digital game playing: A scale development. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10507 . pp. 290-296. ISSN 03029743

Abbasi, I. and Ali, S.S.A. and Ovinis, M. and Naeem, W. (2017) U-model based controller design for an unmanned free swimming submersible (UFSS) vehicle under hydrodynamic disturbances. Indian Journal of Geo-Marine Sciences, 46 (4). pp. 742-748. ISSN 25826506

Abbasi, S.S. and Min, T.H. and Shafiai, S.H. and Theng, S.Y. and Heng, L.C. (2017) Design enhancement of an Oscillating water column for harnessing of wave energy. ARPN Journal of Engineering and Applied Sciences, 12 (16). pp. 4791-4795. ISSN 18196608

Abd Aziz, A.R. and Anbese, Y.T. and Hagos, F.Y. and Heikal, M.R. and Firmansyah (2017) Characteristics of early flame development in a direct-injection spark-ignition cng engine fitted with a variable swirl control valve. Energies, 10 (7). ISSN 19961073

Abdalla, I.I. and Ibrahim, T. and Mohd Nor, N.B. (2017) The fabrication and characterization of short-stroke tubular linear permanent-magnet motor. Lecture Notes in Electrical Engineering, 398. pp. 777-789. ISSN 18761100

Abdalla, I.I. and Ibrahim, T. and Nor, N.M. and Perumal, N. (2017) Optimal design of a single-slotted permanent-magnet linear generator for wave energy conversion. International Journal of Applied Electromagnetics and Mechanics, 56 (1). pp. 21-34. ISSN 13835416

Abdalla, I.I. and Ibrahim, T. and Perumal, N. and Nor, N.M. (2017) Minimization of eddy-current loss in a permanent-magnet tubular linear motor. International Journal on Advanced Science, Engineering and Information Technology, 7 (3). pp. 964-970. ISSN 20885334

Abdalla, I.I. and Zainal A., E.Z. and Anwarudin, A.R.T. and Firmansyah and Aziz, A.R.A. and Heikal, M.R. (2017) Cogging force issues of permanent magnet linear generator for electric vehicle. Journal of Electrical Systems, 13 (3). pp. 489-502. ISSN 11125209

Abdalsalam, E. and Yusoff, M.Z. and Kamel, N. and Malik, A.S. and Mahmoud, D. (2017) Classification of four class motor imagery for brain computer interface. Lecture Notes in Electrical Engineering, 398. pp. 297-305. ISSN 18761100

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Garg, S. and Dreisbach, F. and Keong, L.K. and Mellon, N. (2017) Experimental and Neural Network Modeling of Partial Uptake for a Carbon Dioxide/Methane/Water Ternary Mixture on 13X Zeolite. Energy Technology, 5 (8). pp. 1373-1391. ISSN 21944288

Abdul Karim, S.A. and Saaban, A. (2017) Shape Preserving Interpolation Using Rational Cubic Ball Function and Its Application in Image Interpolation. Mathematical Problems in Engineering, 2017. ISSN 1024123X

Abdul Rani, A.M. and Mahamat, A.Z. and Ab Adzis, A.H. (2017) Novel Nano Copper-Tungsten-Based EDM Electrode. Topics in Mining, Metallurgy and Materials Engineering. pp. 193-224. ISSN 23643293

Abdul Wahhab, H. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2017) Characteristics of CNG bubbles in Diesel flow under the influence of the magnetic field. Journal of Applied Fluid Mechanics, 10 (6). pp. 1649-1655. ISSN 17353572

Abdul Wahhab, H.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2017) Mathematical modeling of the flow of diesel-CNG fuel mixture in a pipe under the influence of a magnetic field. Journal of Applied Fluid Mechanics, 10 (1). pp. 389-396. ISSN 17353572

Abdul-Rani, A.M. and Krishnan, S. and Nagarajan, T. and Rao, T.V.V.L.N. (2017) Inverse kinematics-stewart platform actuated by shape memory alloy for immobilization of ankle-foot rehabilitation. Key Engineering Materials, 724 KE. pp. 105-111. ISSN 10139826

Abdul-Rani, A.M. and Krishnan, S. and Nagarajan, T. and Rao, T.V.V.L.N. and Ramiah, R. and Ambaraj, W. (2017) Early mobilization using heat treated shape memory alloy (sma) for rehabilitation phases. Key Engineering Materials, 724 KE. pp. 112-116. ISSN 10139826

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. (2017) Surface morphology and corrosion behavior in nano pmedm. Key Engineering Materials, 724 KE. pp. 61-65. ISSN 10139826

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. and Razak, M.A. (2017) Machined Surface Quality in Nano Aluminum Mixed Electrical Discharge Machining. Procedia Manufacturing, 7. pp. 510-517. ISSN 23519789

Abdul-Rani, A.M. and Razak, M.A. and Littlefair, G. and Gibson, I. and Nanimina, A.M. (2017) Improving EDM Process on AZ31 Magnesium Alloy towards Sustainable Biodegradable Implant Manufacturing. Procedia Manufacturing, 7. pp. 504-509. ISSN 23519789

Abdul-Wahhab, H.A. and Al-Kayiem, H.H. and A. Aziz, A.R. and Nasif, M.S. (2017) Survey of invest fuel magnetization in developing internal combustion engine characteristics. Renewable and Sustainable Energy Reviews, 79. pp. 1392-1399. ISSN 13640321

Abdullah, B. and Abd Ghani, N.A. and Vo, D.-V.N. (2017) Recent advances in dry reforming of methane over Ni-based catalysts. Journal of Cleaner Production, 162. pp. 170-185. ISSN 09596526

Abdullah, B. and Adesina, A.A. (2017) Evaluation of gas�liquid mass transfer in gas-induced stirred tank reactor using electrical resistance tomography. Journal of Chemical Technology and Biotechnology, 92 (8). pp. 2123-2133. ISSN 02682575

Abdullah, M.E. and Rosni, N.N.M. and Jaya, R.P. and Yaacob, H. and Hassan, N.A. and Agussabti (2017) Effect of charcoal ash coconut shell from waste material at different size on the physical properties of bitumen. Key Engineering Materials, 744 74. pp. 121-125. ISSN 10139826

Abdullah, W.H. and Hakimi, M.H. and Shushan, I.E.-F. and Rahman, A.H.A. (2017) Petroleum source rock characteristics of marine versus coastal settings: A comparative study between Madbi Formation of Masila Basin, Yemen and Nyalau formation of Sarawak, Malaysia. Bulletin of the Geological Society of Malaysia, 63. pp. 103-115. ISSN 01266187

Abdulra�Uf, M.Y. and Sulam, M.B. and Merican, A.M. (2017) Exploring the views of Malaysian scholars on knowledge production in the social science. Advanced Science Letters, 23 (9). pp. 8569-8573. ISSN 19366612

Abdulra�uf, M.Y. and Sulam, M.B. and Merican, A.M. and Wei-Su (2017) Social science production of Malaysian universities based on the scopus database: A centre-periphery analysis. Advanced Science Letters, 23 (9). pp. 9203-9207. ISSN 19366612

Abdulwahhab, H.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2017) Modeling of diesel- compressed natural gas bubbly flow under influencing of a magnetic field. Journal of Engineering Science and Technology, 12 (7). pp. 1930-1938. ISSN 18234690

Abed, S.A. and Rais, H.M. (2017) Hybrid bat algorithm for minimum dominating set problem. Journal of Intelligent and Fuzzy Systems, 33 (4). pp. 2329-2339. ISSN 10641246

Abouzari-Lotf, E. and Ghassemi, H. and Nasef, M.M. and Ahmad, A. and Zakeri, M. and Ting, T.M. and Abbasi, A. and Mehdipour-Ataei, S. (2017) Phase separated nanofibrous anion exchange membranes with polycationic side chains. Journal of Materials Chemistry A, 5 (29). pp. 15326-15341. ISSN 20507488

Abualqumboz, M.S. and Mohammed, N.I. and Malakahmad, A. and Nazif, A.N. (2017) Investigating indoor concentrations of PM10 in an underground loading dock in Malaysia. Air Quality, Atmosphere and Health, 10 (2). pp. 147-159. ISSN 18739318

Abubakar, M.Y. and Jung, L.T. and Zakaria, N. and Younes, A. and Abdel-Aty, A.-H. (2017) Reversible circuit synthesis by genetic programming using dynamic gate libraries. Quantum Information Processing, 16 (6). ISSN 15700755

Abunama, T. and Othman, F. and Alslaibi, T. and Abualqumboz, M. (2017) Quantifying the generated and percolated leachate through a landfill�s lining system in Gaza strip, Palestine. Polish Journal of Environmental Studies, 26 (6). pp. 2455-2461. ISSN 12301485

Achara, B.E. and Mohammed, B.S. and Nuruddin, M.F. (2017) Properties of Nano-Silica modified self-compacting high-volume fly ash mortar. Journal of Engineering and Applied Sciences, 12 (20). pp. 5294-5300. ISSN 1816949X

Adam, I.K. and Aziz, A.R.A. and Heikal, M.R. and Yusup, S. (2017) Performance and Emission Analysis of Rubber Seed Methyl Ester and Antioxidant in a Multicylinder Diesel Engine. Energy and Fuels, 31 (4). pp. 4424-4435. ISSN 08870624

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Effect of polycarboxylate superplasticizer dosage on the mechanical performance of roller compacted Rubbercrete for pavement applications. Journal of Engineering and Applied Sciences, 12 (20). pp. 5253-5260. ISSN 1816949X

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Evaluating the effect of superplasticizer on the properties of roller compacted concrete using response surface methodology. ARPN Journal of Engineering and Applied Sciences, 12 (21). pp. 6206-6215. ISSN 18196608

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Mechanical performance of roller compacted rubbercrete with different mineral filler. Jurnal Teknologi, 79 (6). pp. 75-88. ISSN 01279696

Adil, M. and Mohd Zaid, H. and Chuan, L.K. and Ahmad Latiff, N.R. (2017) Effect of EM propagation medium on electrorheological characteristics of dielectric nanofluids. Journal of Dispersion Science and Technology, 38 (4). pp. 570-576. ISSN 01932691

Adnan, N. and Md Nordin, S. and Rahman, I. and Noor, A. (2017) Adoption of green fertilizer technology among paddy farmers: A possible solution for Malaysian food security. Land Use Policy, 63. pp. 38-52. ISSN 02648377

Adnan, N. and Nordin, S.M. and Rahman, I. (2017) Adoption of PHEV/EV in Malaysia: A critical review on predicting consumer behaviour. Renewable and Sustainable Energy Reviews, 72. pp. 849-862. ISSN 13640321

Adnan, N. and Nordin, S.M. and Rahman, I. and Amini, M.H. (2017) A market modeling review study on predicting Malaysian consumer behavior towards widespread adoption of PHEV/EV. Environmental Science and Pollution Research, 24 (22). pp. 17955-17975. ISSN 09441344

Adnan, N. and Nordin, S.M. and Rahman, I. and Rasli, A.M. (2017) A new era of sustainable transport: An experimental examination on forecasting adoption behavior of EVs among Malaysian consumer. Transportation Research Part A: Policy and Practice, 103. pp. 279-295. ISSN 09658564

Adnan, N. and Nordin, S.M. and Rahman, I. and Vasant, P.M. and Noor, A. (2017) A comprehensive review on theoretical framework-based electric vehicle consumer adoption research. International Journal of Energy Research, 41 (3). pp. 317-335. ISSN 0363907X

Adnan, N. and Nordin, S.M. and bin Abu Bakar, Z. (2017) Understanding and facilitating sustainable agricultural practice: A comprehensive analysis of adoption behaviour among Malaysian paddy farmers. Land Use Policy, 68. pp. 372-382. ISSN 02648377

Afolabi, L.O. and Al-Kayiem, H.H. and Aklilu, T.B. (2017) On the nano-additive enhanced flat plate solar collector integrated with thermal energy storage. Nanoscience and Nanotechnology - Asia, 7 (2). pp. 172-182. ISSN 22106812

Afrooz, I.E. and Sinnathambi, C.M. and Chuang, D.L. and Karuppanan, S. (2017) CFD simulation of bubbling fluidized bed: Effects of bed column geometry on hydrodynamics of gas�solid mixing: Numerische Strömungssimulation einer blasenbildenden Wirbelschicht: Einfluss der Reaktorgeometrie auf die hydrodynamischen Eigenschaften einer Gas-Feststoff Mischung. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 226-234. ISSN 09335137

Ahmad, A. and Bhat, A.H. and Buang, A. (2017) Immobilized chlorella vulgaris for efficient palm oil mill effluent treatment and heavy metals removal. Desalination and Water Treatment, 81. pp. 105-117. ISSN 19443994

Ahmad, M. and Ab. Rahim, L. and Arshad, N.I. (2017) Applying interpretive hermeneutic approach to interrelate the game environment and learner�s interaction. Journal of Theoretical and Applied Information Technology, 95 (24). pp. 7030-7048. ISSN 19928645

Ahmad, M. and Jung, L.T. and Bhuiyan, A.-A. (2017) From DNA to protein: Why genetic code context of nucleotides for DNA signal processing? A review. Biomedical Signal Processing and Control, 34. pp. 44-63. ISSN 17468094

Ahmad, M. and Jung, L.T. and Bhuiyan, A.-A. (2017) A biological inspired fuzzy adaptive window median filter (FAWMF) for enhancing DNA signal processing. Computer Methods and Programs in Biomedicine, 149. pp. 11-17. ISSN 01692607

Ahmad, P. and Khandaker, M.U. and Muhammad, N. and Rehman, F. and Khan, G. and Rehman, M.A. and Ahmed, S.M. and Gulzar, M. and Numan, A. and Khan, A.S. (2017) Synthesis of multilayered hexagonal boron nitride microcrystals as a potential hydrogen storage element. Ceramics International, 43 (9). pp. 7358-7361. ISSN 02728842

Ahmad, P. and Khandaker, M.U. and Shah, S.T. and Rehman, F. and Khan, G. and Muhammad, N. and Rehman, M.A. and Khan, A.S. and Ahmed, S.M. and Gulzar, M. and Numan, A. and Ali, H. (2017) Controlled synthesis of anisotropic hexagonal boron nitride nano-web. Materials Science in Semiconductor Processing, 66. pp. 44-49. ISSN 13698001

Ahmad, R. and Kamaruddin, S. (2017) Structured maintenance engineering policy development based on a production machine process perspective. Journal of Quality in Maintenance Engineering, 23 (2). pp. 180-194. ISSN 13552511

Ahmad, R. and Sarlan, A. and Basri, S. (2017) The impact of database structure on join query�s energy consumption. Advanced Science Letters, 23 (11). pp. 10528-10532. ISSN 19366612

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. and Amin, H.U. and Hussain, M. (2017) Visual brain activity patterns classification with simultaneous EEG-fMRI: A multimodal approach. Technology and Health Care, 25 (3). pp. 471-485. ISSN 09287329

Ahmed, A.A. and Saaid, I.M. and Akhir, N.A.M. (2017) Graft Copolymerization of N-Isopropylacrylamide and Acrylic Acid on Bentonite Colloids for In-Depth Fluid Diversion. Energy and Fuels, 31 (4). pp. 3537-3545. ISSN 08870624

Ahmed, A.Y. and Witjaksono, G. and Dennis, J.O. and Md Khir, M.H. and Rabih, A.A.S. and Mian, M.U. and Ahmed, M.G.A. (2017) High sensitivity CMOS- MEMS relative humidity sensor based on electrothermal actuation. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-8). pp. 83-87. ISSN 21801843

Ahmed, K.Y. and Bin Yahay, N.Z. and Ramani, K. and Asirvadam, V.S. (2017) Modeling and execution the control strategy for the three-level rectifier based on voltage oriented control. International Journal of Power Electronics and Drive Systems, 8 (4). pp. 1603-1611. ISSN 20888694

Ahmed, K.Y. and Yahaya, N.Z. and Asirvadam, V.S. and Ramani, K. and Shannan, N.M. (2017) Modeling of steady state and transient state of the power electronic distribution transformer. Lecture Notes in Electrical Engineering, 398. pp. 807-817. ISSN 18761100

Ahmed, S. and Elraies, K.A. and Forooozesh, J. and Bt Mohd Shafian, S.R. and Hashmet, M.R. and Hsia, I.C.C. and Almansour, A. (2017) Experimental investigation of immiscible supercritical carbon dioxide foam rheology for improved oil recovery. Journal of Earth Science, 28 (5). pp. 835-841. ISSN 1674487X

Ahmed, S. and Elraies, K.A. and Foroozesh, J. and Shafian, S.R.B.M. and Hashmet, M.R. and Hsia, I.C.C. and Almansour, A. (2017) Erratum to: Experimental investigation of immiscible supercritical carbon dioxide foam rheology for improved oil recovery (Journal of Earth Science, (2017), 28, 5, (835-841), 10.1007/s12583-017-0803-z). Journal of Earth Science, 28 (6). p. 1192. ISSN 1674487X

Ahmed, S. and Elraies, K.A. and Hashmet, M.R. and Hanamertani, A.S. (2017) Viscosity models for polymer free CO2 foam fracturing fluid with the effect of surfactant concentration, salinity and shear rate. Energies, 10 (12). ISSN 19961073

Ahmed, S. and Elraies, K.A. and Tan, I.M. and Hashmet, M.R. (2017) Experimental investigation of associative polymer performance for CO2 foam enhanced oil recovery. Journal of Petroleum Science and Engineering, 157. pp. 971-979. ISSN 09204105

Ahmed, S. and Ramli, A. and Yusup, S. (2017) Development of polyethylenimine-functionalized mesoporous Si-MCM-41 for CO2 adsorption. Fuel Processing Technology, 167. pp. 622-630. ISSN 03783820

Ahmed, S. and Ramli, A. and Yusup, S. and Farooq, M. (2017) Adsorption behavior of tetraethylenepentamine-functionalized Si-MCM-41 for CO2 adsorption. Chemical Engineering Research and Design, 122. pp. 33-42. ISSN 02638762

Ajam, A. and Aziz, A.A. and Asirvadam, V.S. and Muda, A.S. and Faye, I. and Safdar Gardezi, S.J. (2017) A Review on Segmentation and Modeling of Cerebral Vasculature for Surgical Planning. IEEE Access, 5. pp. 15222-15240. ISSN 21693536

Akbar, R. and Hassan, M.F. and Abdullah, A. (2017) A meta-model of software development project states behavioral study of software projects. Journal of Software: Evolution and Process, 29 (4). ISSN 20477481

Akbari, S. and Mahmood, S.M. and Tan, I.M. and Adeyemi, B.J. (2017) Evaluation of One Factor at A Time (OFAT) technique in viscosity modeling of polymer solution. Journal of Engineering and Applied Sciences, 12 (17). pp. 4313-4319. ISSN 1816949X

Akbari, S. and Mahmood, S.M. and Tan, I.M. and Bharadwaj, A.M. and Hematpour, H. (2017) Experimental investigation of the effect of different process variables on the viscosity of sulfonated polyacrylamide copolymers. Journal of Petroleum Exploration and Production Technology, 7 (1). pp. 87-101. ISSN 21900558

Akbari, S. and Mahmood, S.M. and Tan, I.M. and Ghaedi, H. and Ling, O.L. (2017) Assessment of polyacrylamide based co-polymers enhanced by functional group modifications with regards to salinity and hardness. Polymers, 9 (12). ISSN 20734360

Akbari, S. and Mahmood, S.M. and Tan, I.M. and Ling, O.L. and Ghaedi, H. (2017) Effect of aging, antioxidant, and mono- and divalent ions at high temperature on the rheology of new polyacrylamide-based co-polymers. Polymers, 9 (10). ISSN 20734360

Akhir, E.A.P. and Hughes, R.T. and Cox, K. (2017) Information model to support sustainable procurement. Journal of Theoretical and Applied Information Technology, 95 (22). pp. 6278-6287. ISSN 19928645

Akhtar, S. and Khan, M.N. and Kurnia, J.C. and Shamim, T. (2017) Investigation of energy conversion and flame stability in a curved micro-combustor for thermo-photovoltaic (TPV) applications. Applied Energy, 192. pp. 134-145. ISSN 03062619

Akilu, S. and Baheta, A.T. and Minea, A.A. and Sharma, K.V. (2017) Rheology and thermal conductivity of non-porous silica (SiO2) in viscous glycerol and ethylene glycol based nanofluids. International Communications in Heat and Mass Transfer, 88. pp. 245-253. ISSN 07351933

Akilu, S. and Baheta, A.T. and Sharma, K.V. (2017) Experimental measurements of thermal conductivity and viscosity of ethylene glycol-based hybrid nanofluid with TiO2-CuO/C inclusions. Journal of Molecular Liquids, 246. pp. 396-405. ISSN 01677322

Akram, A. and Mustaffa, Z. and Albarody, T.M.B. and Edmund, J.E. (2017) Numerical comparison between single layer woven flexible pipe and reinforced thermoplastic pipe. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 3166-3177. ISSN 22894659

Al Kaisy, G.M.J. and Abdul Mutalib, M.I. and Rao, T.V.V.L.N. (2017) Novel halogen free hydrophobic trioctylammonium-based protic ionic liquids with carboxylate anions: Synthesis, characterization, and thermophysical properties. Journal of Molecular Liquids, 242. pp. 349-356. ISSN 01677322

Al Kaisy, G.M.J. and Mutalib, M.I.A. and Leveque, J.M. and Rao, T.V.V.L.N. (2017) Novel low viscosity ammonium-based ionic liquids with carboxylate anions: Synthesis, characterization, and thermophysical properties. Journal of Molecular Liquids, 230. pp. 565-573. ISSN 01677322

Al-Kayiem, H.H. (2017) Reliability of nanoadditives on the thermal enhancement of nanofluids and nanocomposites. Nanoscience and Nanotechnology - Asia, 7 (2). p. 124. ISSN 22106812

Al-Kayiem, H.H. and Ekhwan, A.B. and Muhi, L.N. (2017) Augmentation of ribs turbulators height on the hydrothermal performance of double pipe heat exchanger. Journal of Engineering Science and Technology, 12 (2). pp. 548-563. ISSN 18234690

Al-Kayiem, H.H. and Jamil, I.E.A. (2017) Fundamental investigation of the oil/water flow emulsion in the downhole by cfd simulation. WIT Transactions on Ecology and the Environment, 224 (1). pp. 541-551. ISSN 1746448X

Al-Kayiem, H.H. and Khan, J.A. (2017) Evaluation of Alkali/Surfactant/Polymer Flooding on Separation and Stabilization of Water/Oil Emulsion by Statistical Modeling. Energy and Fuels, 31 (9). pp. 9290-9301. ISSN 08870624

Al-Kayiem, H.H. and Ning, W. and Mokhlif, N.D. (2017) Characterisation of paraffinic compositions in crude oils. International Journal of Oil, Gas and Coal Technology, 15 (2). pp. 152-165. ISSN 17533309

Al-Shargie, F. and Tang, T.B. and Kiguchi, M. (2017) Assessment of mental stress effects on prefrontal cortical activities using canonical correlation analysis: An fNIRS-EEG study. Biomedical Optics Express, 8 (5). pp. 2583-2598. ISSN 21567085

Al-Shargie, F. and Tang, T.B. and Kiguchi, M. (2017) Stress Assessment Based on Decision Fusion of EEG and fNIRS Signals. IEEE Access, 5. pp. 19889-19896. ISSN 21693536

Al-Waked, R. and Groenhout, N. and Partridge, L. and Nasif, M. (2017) Indoor air environment of a shopping centre carpark: CFD ventilation study. Universal Journal of Mechanical Engineering, 5 (4). pp. 113-123. ISSN 23323353

Al-Waked, R. and Nasif, M.S. and Groenhout, N. and Partridge, L. (2017) Energy performance and CO2 emissions of HVAC systems in commercial buildings. Buildings, 7 (4). ISSN 20755309

Alashloo, S.Y.M. and Ghosh, D.P. (2017) Prestack depth imaging in complex structures using VTI fast marching traveltimes. Exploration Geophysics, 49 (4). pp. 484-493. ISSN 08123985

Aldabbagh, G. and Shah, P.A. and Hasbullah, H.B. and Aadil, F. and Awan, K.M. and Marwat, F. (2017) Fuzzy logic based enhanced AOMDV with link status classification for efficient multi-path routing in multi-hop wireless networks. Journal of Computational and Theoretical Nanoscience, 14 (1). pp. 620-630. ISSN 15461955

Aleem, W. and Mellon, N. (2017) New relation between viscosity and surface tension for pure hydrocarbon liquids. Petroleum Science and Technology, 35 (4). pp. 338-344. ISSN 10916466

Alhussian, H.S.A. and Zakaria, M.N.B. and Hussin, F.A.B. (2017) Minimizing scheduling overhead in LRE-TL real-time multiprocessor scheduling algorithm. Turkish Journal of Electrical Engineering and Computer Sciences, 25 (1). pp. 263-277. ISSN 13000632

Ali, A. and Mohd Nor, N. and Ibrahim, T. and Fakhizan Romlie, M. (2017) Sizing and placement of battery-coupled distributed photovoltaic generations. Journal of Renewable and Sustainable Energy, 9 (5). ISSN 19417012

Ali, A.M. and Padmanabhan, E. and Baioumy, H. (2017) Characterization of Alkali-Induced Quartz Dissolution Rates and Morphologies. Arabian Journal for Science and Engineering, 42 (6). pp. 2501-2513. ISSN 2193567X

Ali, E.M. and Yahaya, N.Z. and Perumal, N. and Zakariya, M.A. (2017) Design of microstrip patch antenna at 900 MHz for charging mobile applications. Journal of Engineering and Applied Sciences, 12 (4). pp. 988-993. ISSN 1816949X

Ali, L. and Islam, S. and Gul, T. and Khan, I. and Dennis, L.C.C. and Khan, W. and Khan, A. (2017) The brownian and thermophoretic analysis of the non-Newtonian Williamson fluid flow of thin film in a Porous Space over an unstable stretching surface. Applied Sciences (Switzerland), 7 (4). ISSN 20763417

Ali, M. and Khan, S.A. and Sheikh, N.A. and Gilani, S.I.-U.-H. and Shehryar, M. and Ali, H.M. and Rashid, T.U. (2017) Performance analysis of a low capacity solar tower water heating system in climate of Pakistan. Energy and Buildings, 143. pp. 84-99. ISSN 03787788

Ali, M.K.M. and Sulaiman, J. and Yasir, S.M. and Ruslan, M.H. and Fudholi, A. and Muthuvalu, M.S. and Ramu, V. (2017) Cubic spline as a powerful tools for processing experimental drying rate data of seaweed using solar drier. Malaysian Journal of Mathematical Sciences, 11 (S). pp. 159-172. ISSN 18238343

Ali, S. and Zabidi, N.A.M. and Al-Marri, M.J. and Khader, M.M. (2017) Effect of the support on physicochemical properties and catalytic performance of cobalt based nano-catalysts in Fischer-Tropsch reaction. Materials Today Communications, 10. pp. 67-71. ISSN 23524928

Ali, W. and Abdullah, A. and Azam, M. (2017) Re-visiting the environmental Kuznets curve hypothesis for Malaysia: Fresh evidence from ARDL bounds testing approach. Renewable and Sustainable Energy Reviews, 77. pp. 990-1000. ISSN 13640321

Ali, W. and Abdullah, A. and Azam, M. (2017) The dynamic relationship between structural change and CO2 emissions in Malaysia: a cointegrating approach. Environmental Science and Pollution Research, 24 (14). pp. 12723-12739. ISSN 09441344

Ali, Z. and Alsulaiman, M. and Muhammad, G. and Elamvazuthi, I. and Al-nasheri, A. and Mesallam, T.A. and Farahat, M. and Malki, K.H. (2017) Intra- and Inter-database Study for Arabic, English, and German Databases: Do Conventional Speech Features Detect Voice Pathology? Journal of Voice, 31 (3). 386.e1-386.e8. ISSN 08921997

Alipour Moghadam Esfahani, R. and Osmieri, L. and Specchia, S. and Yusup, S. and Tavasoli, A. and Zamaniyan, A. (2017) H2-rich syngas production through mixed residual biomass and HDPE waste via integrated catalytic gasification and tar cracking plus bio-char upgrading. Chemical Engineering Journal, 308. pp. 578-587. ISSN 13858947

Aliyu, A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Axinte, E. and Razak, M.A. and Ali, S. (2017) A Review of Additive Mixed-Electric Discharge Machining: Current Status and Future Perspectives for Surface Modification of Biomedical Implants. Advances in Materials Science and Engineering, 2017. ISSN 16878434

Aliyu, A.A.A. and Rohani, J.M. and Rani, A.M.A. and Musa, H. (2017) Optimization of electrical discharge machining parameters of SiSiC through response surface methodology. Jurnal Teknologi, 79 (1). pp. 119-129. ISSN 01279696

Alnarabiji, M.S. and Yahya, N. and Hamed, Y. and Ardakani, S.E.M. and Mohd Azizi, K.A. and Klemeš, J.J. and Abdullah, B. and Tasfy, S.F.H. and Hamid, S.B.A. and Nashed, O. (2017) Scalable bio-friendly method for production of homogeneous metal oxide nanoparticles using green bovine skin gelatin. Journal of Cleaner Production, 162. pp. 186-194. ISSN 09596526

Alqasem, B. and Yahya, N. and Qureshi, S. and Irfan, M. and Ur Rehman, Z. and Soleimani, H. (2017) The enhancement of the magnetic properties of α-Fe2O3 nanocatalyst using an external magnetic field for the production of green ammonia. Materials Science and Engineering: B, 217. pp. 49-62. ISSN 09215107

Alsaih, K. and Lemaitre, G. and Rastgoo, M. and Massich, J. and Sidibé, D. and Meriaudeau, F. (2017) Machine learning techniques for diabetic macular edema (DME) classification on SD-OCT images. BioMedical Engineering Online, 16 (1). ISSN 1475925X

Altaf, K. and Zulkarnain, A.F. and Qayyum, J.A. and Jahanzaib, M. (2017) Optimum build orientation OF3D printed parts for a robot gripper. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5772-5777. ISSN 18196608

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H. and Sebastian, P. and Saad, N. and Ibrahim, R. and Dass, S.C. (2017) Modeling Multicamera Coverage for Placement Optimization. IEEE Sensors Letters, 1 (6). ISSN 24751472

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. and Saad, N.B. and Ibrahim, R.B. and Dass, S.C. (2017) Optimizing Visual Surveillance Sensor Coverage Using Dynamic Programming. IEEE Sensors Journal, 17 (11). pp. 3398-3405. ISSN 1530437X

Alzahrani, S.K. and Ghazali, Z.B. and Kaur, S. (2017) Learning organization as a moderator of the relationship between knowledge creation and adaptability in international joint venture. International Journal of Applied Business and Economic Research, 15 (18). pp. 387-395. ISSN 09727302

Aman, M. and Said, A.B.M. and Kadir, S.J.A. and Baharudin, B. (2017) A review of studies on ontology development for Islamic knowledge domain. Journal of Theoretical and Applied Information Technology, 95 (14). pp. 3303-3311. ISSN 19928645

Amare, F.D. and Gilani, S.I. and Aklilu, B.T. and Mojahid, A. (2017) Two-shaft stationary gas turbine engine gas path diagnostics using fuzzy logic. Journal of Mechanical Science and Technology, 31 (11). pp. 5593-5602. ISSN 1738494X

Ameen, M. and Azizan, M.T. and Yusup, S. and Ramli, A. (2017) Hydroprocessing of rubber seed oil over Ni-Mo/γ-Al2O3 for the green diesel production. Chemical Engineering Transactions, 61. pp. 1843-1848. ISSN 22839216

Ameen, M. and Azizan, M.T. and Yusup, S. and Ramli, A. and Yasir, M. (2017) Catalytic hydrodeoxygenation of triglycerides: An approach to clean diesel fuel production. Renewable and Sustainable Energy Reviews, 80. pp. 1072-1088. ISSN 13640321

Amin, H.U. and Mumtaz, W. and Subhani, A.R. and Saad, M.N.M. and Malik, A.S. (2017) Classification of EEG signals based on pattern recognition approach. Frontiers in Computational Neuroscience, 11. ISSN 16625188

Aminu, M. and Matori, A.N. and Yusof, K.W. and Malakahmad, A. and Zainol, R.B. (2017) Analytic network process (ANP)-based spatial decision support system (SDSS) for sustainable tourism planning in Cameron Highlands, Malaysia. Arabian Journal of Geosciences, 10 (13). ISSN 18667511

Andriamihaja, S. and Padmanabhan, E. (2017) characterization of pore system changes induced by dissolution in carbonate rocks. Petroleum and Coal, 59 (5). pp. 582-589. ISSN 13377027

Anees, M. and Shah, M.M. and Qureshi, A.A. and Manzoor, S. (2017) Multi proxy approach to evaluate and delineate the potential of hot springs in the Kotli District (Kashmir, Pakistan). Geologica Acta, 15 (3). pp. 217-230. ISSN 16956133

Ani, Z.C. and Basri, S. and Sarlan, A. (2017) A reusability assessment of UCP-based effort estimation framework using object-oriented approach. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-5 Sp). pp. 111-114. ISSN 21801843

Anwer, A. and Azhar Ali, S.S. and Khan, A. and Meriaudeau, F. (2017) Underwater 3-D Scene Reconstruction Using Kinect v2 Based on Physical Models for Refraction and Time of Flight Correction. IEEE Access, 5. pp. 15960-15970. ISSN 21693536

Aqsha, A. and Tijani, M.M. and Moghtaderi, B. and Mahinpey, N. (2017) Catalytic pyrolysis of straw biomasses (wheat, flax, oat and barley) and the comparison of their product yields. Journal of Analytical and Applied Pyrolysis, 125. pp. 201-208. ISSN 01652370

Ariffin, M.M. and Ahmad, W.F.W. and Sulaiman, S. (2017) Harvesting the power of serious game for IT education. Advanced Science Letters, 23 (11). pp. 10978-10980. ISSN 19366612

Asaad, M.A. and Ismail, M. and Raja, P.B. and Khalid, N.H.A. (2017) Rhizophora Apiculata As Eco-Friendly Inhibitor Against Mild Steel Corrosion in 1 M HCL. Surface Review and Letters, 24. ISSN 0218625X

Asif, S. and Ahmad, M. and Bokhari, A. and Chuah, L.F. and Klemeš, J.J. and Akbar, M.M. and Sultana, S. and Yusup, S. (2017) Methyl ester synthesis of Pistacia khinjuk seed oil by ultrasonic-assisted cavitation system. Industrial Crops and Products, 108. pp. 336-347. ISSN 09266690

Assadi, M.K. and Hanaei, H. (2017) Transparent Carbon Nanotubes (CNTs) as Antireflection and Self-cleaning Solar Cell Coating. Topics in Mining, Metallurgy and Materials Engineering. pp. 101-114. ISSN 23643293

Assadi, M.K. and Hanaei, H. and Mohamed, N.M. and Saidur, R. and Bakhoda, S. and Bashiri, R. and Moayedfar, M. (2017) Erratum to: Enhancing the efficiency of luminescent solar concentrators (LSCs) (Applied Physics A, (2016), 122, 9, (821), 10.1007/s00339-016-0359-2). Applied Physics A: Materials Science and Processing, 123 (4). ISSN 09478396

Assagaf, A. and Yusoff, Y.M. and Hassan, R. (2017) Government subsidy, strategic profitability and its impact on financial performance: Empirical evidence from Indonesia. Investment Management and Financial Innovations, 14 (3). pp. 135-147. ISSN 18104967

Atnaw, S.M. and Sulaiman, S.A. and Singh, L. and Wahid, Z.A. and Yahya, C.K.M.F.B.C.K. (2017) Modeling and parametric study for maximizing heating value of gasification syngas. BioResources, 12 (2). pp. 2548-2564. ISSN 19302126

Aurybi, M.A. and Al-Kayiem, H.H. and Gilani, S.I.U. and Ismaeel, A.A. (2017) Numerical assessment of solar updraft power plant integrated with external heat sources. WIT Transactions on Ecology and the Environment, 226 (1). pp. 657-666. ISSN 1746448X

Awais, M. and Badruddin, N. and Drieberg, M. (2017) A hybrid approach to detect driver drowsiness utilizing physiological signals to improve system performance and Wearability. Sensors (Switzerland), 17 (9). ISSN 14248220

Awang, A. and Husain, K. and Kamel, N. and Aissa, S. (2017) Routing in Vehicular Ad-hoc Networks: A Survey on Single- and Cross-Layer Design Techniques, and Perspectives. IEEE Access, 5. pp. 9497-9517. ISSN 21693536

Ayinla, H.A. and Abdullah, W.H. and Makeen, Y.M. and Abubakar, M.B. and Jauro, A. and Sarki Yandoka, B.M. and Mustapha, K.A. and Zainal Abidin, N.S. (2017) Source rock characteristics, depositional setting and hydrocarbon generation potential of Cretaceous coals and organic rich mudstones from Gombe Formation, Gongola Sub-basin, Northern Benue Trough, NE Nigeria. International Journal of Coal Geology, 173. pp. 212-226. ISSN 01665162

Ayinla, H.A. and Abdullah, W.H. and Makeen, Y.M. and Abubakar, M.B. and Jauro, A. and Sarki Yandoka, B.M. and Zainal Abidin, N.S. (2017) Petrographic and geochemical characterization of the Upper Cretaceous coal and mudstones of Gombe Formation, Gongola sub-basin, northern Benue trough Nigeria: Implication for organic matter preservation, paleodepositional environment and tectonic settings. International Journal of Coal Geology, 180. pp. 67-82. ISSN 01665162

Ayob, F.B. and Hussain, P.B. and Abdullah, A.B. and Aziz, A. (2017) Preliminary study on diffusion welding of marine grades grey cast iron to low carbon steel. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3357-3362. ISSN 18196608

Ayodele, O.B. (2017) Eliminating reverse water gas shift reaction in CO2 hydrogenation to primary oxygenates over MFI-type zeolite supported Cu/ZnO nanocatalysts. Journal of CO2 Utilization, 20. pp. 368-377. ISSN 22129820

Ayodele, O.B. (2017) Influence of oxalate ligand functionalization on Co/ZSM-5 activity in Fischer Tropsch synthesis and hydrodeoxygenation of oleic acid into hydrocarbon fuels. Scientific Reports, 7 (1). ISSN 20452322

Ayodele, O.B. and Tasfy, S.F.H. and Zabidi, N.A.M. and Uemura, Y. (2017) Co-synthesis of methanol and methyl formate from CO2 hydrogenation over oxalate ligand functionalized ZSM-5 supported Cu/ZnO catalyst. Journal of CO2 Utilization, 17. pp. 273-283. ISSN 22129820

Ayoub, M. and Shien, G. and Diab, D. and Ahmed, Q. (2017) Modeling of drilling rate of penetration using adaptive neuro-fuzzy inference system. International Journal of Applied Engineering Research, 12 (22). pp. 12880-12891. ISSN 09734562

Azahari, I.N.N.A. and Wan Ahmad, W.F. and Hashim, A.S. and Jamaludin, Z. (2017) User experience of autism social-aid among autistic children: AUTISM social aid application. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10645 . pp. 391-397. ISSN 03029743

Azam, F.I. and Rani, A.M.A. and Altaf, K. and Zaharin, H.A. (2017) Additive manufacturing design of globe valve for optimized flow. Transactions of the Canadian Society for Mechanical Engineering, 41 (5). pp. 717-723. ISSN 03158977

Azarpour, A. and Alwi, S.R.W. (2017) Prediction of industrial catalysts deactivation rate using first principle model and operating data Ramalan kadar penyahaktifan mangkin industri menggunakan model prinsip pertama dan data operasi. Malaysian Journal of Analytical Sciences, 21 (1). pp. 204-212. ISSN 13942506

Azarpour, A. and N.G. Borhani, T. and R. Wan Alwi, S. and A. Manan, Z. and I. Abdul Mutalib, M. (2017) A generic hybrid model development for process analysis of industrial fixed-bed catalytic reactors. Chemical Engineering Research and Design, 117. pp. 149-167. ISSN 02638762

Azeem, B. and KuShaari, K. and Man, Z. and Irfan, S.A. and Trinh, T.H. (2017) Tumbling fluidized-bed process parameters affecting quality of biopolymer coating on surface of pristine urea particles. Powder Technology, 320. pp. 714-725. ISSN 00325910

Azeem, B. and KuShaari, K. and Man, Z. and Trinh, T.H. (2017) Nutrient release characteristics and coating homogeneity of biopolymer coated urea as a function of fluidized bed process variables. Canadian Journal of Chemical Engineering, 95 (5). pp. 849-862. ISSN 00084034

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2017) Interrelations between process safety management elements. Process Safety Progress, 36 (1). pp. 74-80. ISSN 10668527

Azmee, N.M. and Nuruddin, M.F. (2017) Impact performance of low cement Ultra-high-performance concrete. WIT Transactions on Ecology and the Environment, 223. pp. 481-488. ISSN 1746448X

Azmi, N. and Yusup, S. and Sabil, K.M. (2017) CO2 sorption on mesoporous solids: Effect of temperature and water content. Journal of Chemical and Engineering Data, 62 (1). pp. 456-462. ISSN 00219568

Azmi, N. and Yusup, S. and Sabil, K.M. (2017) Effect of water onto porous CaO for CO2 adsorption: Experimental and extended isotherm model. Journal of Cleaner Production, 168. pp. 973-982. ISSN 09596526

B

Bahloul, M.R. and Yusoff, M.Z. and Abdel, A.-H. and Naufal, M.M.S. and Kudsi, L. (2017) Spectrum sensing for cognitive radio systems using modulation classification: A review. Applied Mathematics and Information Sciences, 11 (3). pp. 857-865. ISSN 19350090

Bahloul, M.R. and Yusoff, M.Z. and Abdel-Aty, A.-H. and Saad, M.N. and Laouiti, A. (2017) Efficient and Reliable Modulation Classification for MIMO Systems. Arabian Journal for Science and Engineering, 42 (12). pp. 5201-5209. ISSN 2193567X

Baig, Z. and Mamat, O. and Mustapha, M. and Sarfraz, M. (2017) Influence of surfactant type on the dispersion state and properties of graphene nanoplatelets reinforced aluminium matrix nanocomposites. Fullerenes Nanotubes and Carbon Nanostructures, 25 (9). pp. 545-557. ISSN 1536383X

Baioumy, H. and Lehmann, B. (2017) Anomalous enrichment of redox-sensitive trace elements in the marine black shales from the Duwi Formation, Egypt: Evidence for the late Cretaceous Tethys anoxia. Journal of African Earth Sciences, 133. pp. 7-14. ISSN 1464343X

Baioumy, H. and Omran, M. and Fabritius, T. (2017) Mineralogy, geochemistry and the origin of high-phosphorus oolitic iron ores of Aswan, Egypt. Ore Geology Reviews, 80. pp. 185-199. ISSN 01691368

Bakhsh, S.T. and AlGhamdi, R. and Altalhi, A.H. and Tahir, S. and Sheikh, M.A. (2017) Adaptive Sleep Efficient Hybrid Medium Access Control algorithm for next-generation wireless sensor networks. Eurasip Journal on Wireless Communications and Networking, 2017 (1). ISSN 16871472

Bala, N. and Kamaruddin, I. and Napiah, M. (2017) The influence of polymer on rheological and thermo oxidative aging properties of modified bitumen binders. Jurnal Teknologi, 79 (6). pp. 61-73. ISSN 01279696

Bala, N. and Napiah, M. and Kamaruddin, I. (2017) Application of Response Surface Methodology for mix design optimization of nanocomposite modified asphalt mixtures. International Journal of GEOMATE, 13 (39). pp. 237-244. ISSN 21862982

Bala, N. and Napiah, M. and Kamaruddin, I. (2017) Performance evaluation of composite asphalt mixture modified with polyethylene and nanosilica. International Journal of Civil Engineering and Technology, 8 (9). pp. 616-628. ISSN 09766308

Balogun, A.-L. and Matori, A.-N. and Hamid-Mosaku, A.I. and Umar Lawal, D. and Ahmed Chandio, I. (2017) Fuzzy MCDM-based GIS model for subsea oil pipeline route optimization: An integrated approach. Marine Georesources and Geotechnology, 35 (7). pp. 961-969. ISSN 1064119X

Ban, Z.H. and Lau, K.K. and Shariff, A.M. (2017) In-line physical desorption unit�Part 1: Conceptual design and numerical analysis. Chemical Engineering Research and Design, 117. pp. 792-809. ISSN 02638762

Ban, Z.H. and Lau, K.K. and Shariff, A.M. (2017) In-line physical desorption unit�Part 2: Optimisation analysis. Chemical Engineering Research and Design, 117. pp. 810-830. ISSN 02638762

Basha, I.H.K. and Ho, E.T.W. and Yousuff, C.M. and Hamid, N.H.B. (2017) Towards multiplex molecular diagnosis-A review of microfluidic Genomics Technologies. Micromachines, 8 (9). ISSN 2072666X

Bashir, A.S.M. and Manusamy, Y. and Chew, T.L. and Ismail, H. and Ramasamy, S. (2017) Mechanical, thermal, and morphological properties of (eggshell powder)-filled natural rubber latex foam. Journal of Vinyl and Additive Technology, 23 (1). pp. 3-12. ISSN 10835601

Bashiri, R. and Mohamed, N.M. and Fai Kait, C. and Sufian, S. and Khatani, M. (2017) Enhanced hydrogen production over incorporated Cu and Ni into titania photocatalyst in glycerol-based photoelectrochemical cell: Effect of total metal loading and calcination temperature. International Journal of Hydrogen Energy, 42 (15). pp. 9553-9566. ISSN 03603199

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Khatani, M. (2017) Enhancing photoelectrochemical hydrogen production over Cu and Ni doped titania thin film: Effect of calcination duration. Journal of Environmental Chemical Engineering, 5 (4). pp. 3207-3214. ISSN 22133437

Basit, A. and Akram, M.S. and Saleem, M. and Awan, J.A. and Jaubert, J.-N. (2017) Characterization and kinetic modeling of the pyrolysis of sugar cane trash. International Journal of Energy, Environment and Economics, 25 (1). pp. 43-56. ISSN 1054853X

Basrawi, F. and Ibrahim, T.K. and Habib, K. and Yamada, T. and Daing Idris, D.M.N. (2017) Techno-economic performance of biogas-fueled micro gas turbine cogeneration systems in sewage treatment plants: Effect of prime mover generation capacity. Energy, 124. pp. 238-248. ISSN 03605442

Basri, E.I. and Razak, I.H.A. and Ab-Samat, H. and Kamaruddin, S. (2017) Preventive maintenance (PM) planning: A review. Journal of Quality in Maintenance Engineering, 23 (2). pp. 114-143. ISSN 13552511

Bataee, M. and Irawan, S. and Namazi-saleh, F. and Ridha, S. (2017) Development of stress model near the wellbore using an iterative coupling method. International Journal of Geomechanics, 17 (2). ISSN 15323641

Bataee, M. and Irawan, S. and Ridha, S. and Hematpour, H. and Hamdi, Z. (2017) Wellbore failure during water-alternating-gas injection by use of flow-stress coupling method. SPE Journal, 22 (1). pp. 172-183. ISSN 1086055X

Bavoh, C.B. and Partoon, B. and Lal, B. and Gonfa, G. and Foo Khor, S. and Sharif, A.M. (2017) Inhibition effect of amino acids on carbon dioxide hydrate. Chemical Engineering Science, 171. pp. 331-339. ISSN 00092509

Bavoh, C.B. and Partoon, B. and Lal, B. and Kok Keong, L. (2017) Methane hydrate-liquid-vapour-equilibrium phase condition measurements in the presence of natural amino acids. Journal of Natural Gas Science and Engineering, 37. pp. 425-434. ISSN 18755100

Behjani, M.A. and Rahmanian, N. and Fardina bt Abdul Ghani, N. and Hassanpour, A. (2017) An investigation on process of seeded granulation in a continuous drum granulator using DEM. Advanced Powder Technology, 28 (10). pp. 2456-2464. ISSN 09218831

Behrani, P. and Nizam, A.S. and Bt Salleh, R. (2017) Association between psychosocial factors with upper extremity musculoskeletal disorders: An academic review. Malaysian Journal of Public Health Medicine, 17 (1). pp. 1-7. ISSN 16750306

Bel, T. and Cakar, H. and Yahya, N. and Arslan, C. and Baydogan, N. (2017) Investigation of the bubble effect in lightweight PMMA polymer. Defect and Diffusion Forum, 380. pp. 227-231. ISSN 10120386

Belachew, C.T. and Che Ismail, M. and Karuppanan, S. (2017) Strength Assessment of Corroded Pipelines - Finite Element Simulations and Parametric Studies. International Journal of Structural Stability and Dynamics, 17 (7). ISSN 02194554

Ben-Awuah, J. and Padmanabhan, E. (2017) An enhanced approach to predict permeability in reservoir sandstones using artificial neural networks (ANN). Arabian Journal of Geosciences, 10 (7). ISSN 18667511

Ben-Awuah, J. and Padmanabhan, E. and Sokkalingam, R. (2017) Geochemistry of Miocene sedimentary rocks from offshore West Baram Delta, Sarawak Basin, Malaysia, South China Sea: implications for weathering, provenance, tectonic setting, paleoclimate and paleoenvironment of deposition. Geosciences Journal, 21 (2). pp. 167-185. ISSN 12264806

Bhat, A.H. and Dasan, Y.K. and Khan, I. and Jawaid, M. (2017) Cellulosic biocomposites: Potential materials for future. Green Energy and Technology (978331). pp. 69-100. ISSN 18653529

Bhat, A.H. and Khan, I. and Bhat, I.U.H. and Soleimani, H. and Usmani, M.A. (2017) Mechanism of Heat Transfer with Nanofluids for the Application in Oil Wells. Topics in Mining, Metallurgy and Materials Engineering. pp. 175-192. ISSN 23643293

Bhat, I.U.H. and Khanam, Z. and Bhat, A.H. (2017) Current Trends in the Preparation of Nanoparticles for Drug Delivery. Topics in Mining, Metallurgy and Materials Engineering. pp. 313-334. ISSN 23643293

Bhatti, M.S. and Tang, T.B. and Laude, A. (2017) Effects of water drinking test on ocular blood flow waveform parameters: A laser speckle flowgraphy study. PLoS ONE, 12 (7). ISSN 19326203

Bhayo, B.A. and Al-Kayiem, H.H. (2017) Experimental characterization and comparison of performance parameters of S-rotors for standalone wind power system. Energy, 138. pp. 752-763. ISSN 03605442

Bhullar, L.K. and Putra, Z.A. (2017) Process design and modelling of the production of butyl cellosolve acetate and EO-3 phosphate ester. Indonesian Journal of Science and Technology, 2 (2). pp. 166-182. ISSN 25281410

Bilad, M.R. (2017) Membrane bioreactor for domestic wastewater treatment: Principles, challanges and future research directions. Indonesian Journal of Science and Technology, 2 (1). pp. 97-123. ISSN 25281410

Bilad, M.R. (2017) Module-scale simulation of forward osmosis module-part B: Modified spiral-wound. Indonesian Journal of Science and Technology, 2 (2). pp. 211-220. ISSN 25281410

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. (2017) Fractional-order filter design for set-point weighted PID controlled unstable systems. International Journal of Mechanical and Mechatronics Engineering, 17 (5). pp. 173-179. ISSN 22272771

Bokhari, A. and Yusup, S. and Chuah, L.F. and Klemeš, J.J. and Asif, S. and Ali, B. and Akbar, M.M. and Kamil, R.N.M. (2017) Pilot scale intensification of rubber seed (Hevea brasiliensis) oil via chemical interesterification using hydrodynamic cavitation technology. Bioresource Technology, 242. pp. 272-282. ISSN 09608524

Bou-Rabee, M. and Sulaiman, S.A. and Saleh, M.S. and Marafi, S. (2017) Using artificial neural networks to estimate solar radiation in Kuwait. Renewable and Sustainable Energy Reviews, 72. pp. 434-438. ISSN 13640321

Broni-Bediako, E. and Amorin, R. and Bavoh, C.B. (2017) Gas hydrate formation phase boundary behaviour of synthetic natural gas system of the Keta basin of Ghana. Open Petroleum Engineering Journal, 10. pp. 64-72. ISSN 18748341

binti Mohd Zulkefli, N.A. and bin Baharudin, B. and bin Md Said, A. (2017) Trust blog ranking using multi-criteria decision analysis AHP and TOPSIS. Lecture Notes in Electrical Engineering, 450. pp. 68-76. ISSN 18761100

C

Chai, Y.H. and Yusup, S. and Chok, V.S. and Irawan, S. and Singh, J.S.D.B. (2017) Thermophysical properties of graphene nanosheets � Hydrogenated oil based nanofluid for drilling fluid improvements. Applied Thermal Engineering, 122. pp. 794-805. ISSN 13594311

Chala, G.T. and Aziz, A.R.A. and Hagos, F.Y. (2017) Combined effect of boost pressure and injection timing on the performance and combustion of CNG in a DI spark ignition engine. International Journal of Automotive Technology, 18 (1). pp. 85-96. ISSN 12299138

Chan, Y.H. and Yusup, S. and Quitain, A.T. and Uemura, Y. and Loh, S.K. (2017) Fractionation of pyrolysis oil via supercritical carbon dioxide extraction: Optimization study using response surface methodology (RSM). Biomass and Bioenergy, 107. pp. 155-163. ISSN 09619534

Chandrasena, D.C.N. and Yusof, K.B.W. and Liyanapathirana, V.C. and Ul Mustafa, M.R. and Mustaffa, Z. (2017) Blocked drains syndrome: Physical degradation of the storm drainage system in a compact city. Advanced Science Letters, 23 (2). pp. 1407-1411. ISSN 19366612

Che Abdullah, S.M. and Nor, N.M. and Zakariya, M.A. and Ali, S.M. and Daud, H. (2017) Investigation of the DGS-CDRA design with the aperture coupling technique for wide band application. Lecture Notes in Electrical Engineering, 398. pp. 563-570. ISSN 18761100

Che Othman, F.E. and Yusof, N. and Hasbullah, H. and Jaafar, J. and Ismail, A.F. and Abdullah, N. and Md Nordin, N.A.H. and Aziz, F. and Wan Salleh, W.N. (2017) Polyacrylonitrile/magnesium oxide-based activated carbon nanofibers with well-developed microporous structure and their adsorption performance for methane. Journal of Industrial and Engineering Chemistry, 51. pp. 281-287. ISSN 1226086X

Cheah, K.W. and Yusup, S. and Gurdeep Singh, H.K. and Uemura, Y. and Lam, H.L. (2017) Process simulation and techno economic analysis of renewable diesel production via catalytic decarboxylation of rubber seed oil � A case study in Malaysia. Journal of Environmental Management, 203. pp. 950-961. ISSN 03014797

Chee, L.P. and Alwi, S.R.W. and Lim, J.S. and Siwayanan, P. (2017) Production decision support system: Real-life emulsion plant case study. Chemical Engineering Transactions, 56. pp. 1267-1272. ISSN 22839216

Cheen, O.C. and Gopinath, S.C.B. and Perumal, V. and Arshad, M.K.M. and Lakshmipriya, T. and Chen, Y. and Haarindraprasad, R. and Rao, B.S. and Hashim, U. and Pandian, K. (2017) Aptamer-based impedimetric determination of the human blood clotting factor IX in serum using an interdigitated electrode modified with a ZnO nanolayer. Microchimica Acta, 184 (1). pp. 117-125. ISSN 00263672

Chennuri, B.K. and Losetty, V. and Wilfred, C.D. and Gardas, R.L. (2017) Thermophysical properties of N-phenyl-N-ethanol ammonium carboxylate based ionic liquids: Measurements, correlations and COSMO-RS study. Journal of Molecular Liquids, 241. pp. 246-254. ISSN 01677322

Chong, S.L. (2017) Many languages, whither literacy? Understanding the ontology of reading in linguistically-diverse contexts. 3L: Language, Linguistics, Literature, 23 (2). pp. 1-13. ISSN 01285157

Chuah, L.F. and Bokhari, A. and Yusup, S. and Klemeš, J.J. and Akbar, M.M. and Saminathan, S. (2017) Optimisation on pretreatment of kapok seed (Ceiba pentandra) oil via esterification reaction in an ultrasonic cavitation reactor. Biomass Conversion and Biorefinery, 7 (1). pp. 91-99. ISSN 21906815

Chuah, L.F. and Klemeš, J.J. and Yusup, S. and Bokhari, A. and Akbar, M.M. (2017) Influence of fatty acids in waste cooking oil for cleaner biodiesel. Clean Technologies and Environmental Policy, 19 (3). pp. 859-868. ISSN 1618954X

Chuah, L.F. and Klemeš, J.J. and Yusup, S. and Bokhari, A. and Akbar, M.M. (2017) A review of cleaner intensification technologies in biodiesel production. Journal of Cleaner Production, 146. pp. 181-193. ISSN 09596526

Chuah, L.F. and Klemeš, J.J. and Yusup, S. and Bokhari, A. and Akbar, M.M. and Chong, Z.K. (2017) Kinetic studies on waste cooking oil into biodiesel via hydrodynamic cavitation. Journal of Cleaner Production, 146. pp. 47-56. ISSN 09596526

Chughtai, O. and Badruddin, N. and Awang, A. and Rehan, M. (2017) A novel route discovery procedure for congestion avoidance in multi-hop WSNs. International Journal of Sensor Networks, 25 (4). pp. 229-243. ISSN 17481279

Chughtai, O. and Badruddin, N. and Rehan, M. and Khan, A. (2017) Congestion detection and alleviation in multihop wireless sensor networks. Wireless Communications and Mobile Computing, 2017. ISSN 15308669

Chung, K.W. and Leman, M.S. and Dzulkafli, M.A. and Mohamed, K.R. and Ali, C.A. and Talib, J.A. (2017) Gagau group (early cretaceous) sedimentary rock deposited at sungai chichir upstream, terengganu darul iman, malaysia Sedimentologi Batuan Enapan Daratan Kumpulan Gagau (Usia Kapur Awal) di Hulu Sungai Chichir, Terengganu Darul Iman, Malaysia. Sains Malaysiana, 46 (12). pp. 2315-2323. ISSN 01266039

Cole, J.M. and Abdelrahim, O.B. and Hunter, A.W. and Schrank, E. and Ismail, M.S.B. (2017) Late Cretaceous spore-pollen zonation of the Central African Rift System (CARS), Kaikang Trough, Muglad Basin, South Sudan: angiosperm spread and links to the Elaterates Province. Palynology, 41 (4). pp. 547-578. ISSN 01916122

Crespo, E.A. and Costa, J.M.L. and Hanafiah, Z.B.M.A. and Kurnia, K.A. and Oliveira, M.B. and Llovell, F. and Vega, L.F. and Carvalho, P.J. and Coutinho, J.A.P. (2017) New measurements and modeling of high pressure thermodynamic properties of glycols. Fluid Phase Equilibria, 436. pp. 113-123. ISSN 03783812

D

Dahy, E. and Shafie, A. and Abdel-Aty, A.-H. and Yahya, N. and Nyamasvisva, T.E. (2017) Simulation of the electromagnetic field response of a horizontal ring electric dipole antenna in planarly homogeneous layered media. Journal of Computational and Theoretical Nanoscience, 14 (7). pp. 3149-3155. ISSN 15461955

Dan, N. and Hussain, P. and Kakooei, S. (2017) Nitriding of Duplex Stainless Steel for Reduction Corrosion and Wear. Topics in Mining, Metallurgy and Materials Engineering. pp. 225-234. ISSN 23643293

Dan, N.E. and Rashid, N. and Hussain, P. and Mohebbi, H. and Amir, N. (2017) Pearlite transformation from ferrite phase by high temperature gas nitriding of duplex stainless steel. Malaysian Journal of Microscopy, 13 (1). pp. 35-41. ISSN 18237010

Daneshfozoun, S. and Abdullah, M.A. and Abdullah, B. (2017) Preparation and characterization of magnetic biosorbent based on oil palm empty fruit bunch fibers, cellulose and Ceiba pentandra for heavy metal ions removal. Industrial Crops and Products, 105. pp. 93-103. ISSN 09266690

Danish, M. and Ginta, T.L. and Habib, K. and Carou, D. and Rani, A.M.A. and Saha, B.B. (2017) Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions. International Journal of Advanced Manufacturing Technology, 91 (5-8). pp. 2855-2868. ISSN 02683768

Danlami, N. and Napiah, M. and Sadullah, A.F.M. and Bala, N. (2017) Exploring tangent-to-curve speed dynamics on two-lane roads in northern Nigeria. International Journal of Civil Engineering and Technology, 8 (11). pp. 466-473. ISSN 09766308

Danlami, N. and Napiah, M. and Sadullah, A.F.M. and Bala, N. (2017) An overview and prediction of Malaysian road fatality: Approach using generalized estimating equations. International Journal of Civil Engineering and Technology, 8 (11). pp. 452-465. ISSN 09766308

Dasan, Y.K. and Bhat, A.H. and Ahmad, F. (2017) Polymer blend of PLA/PHBV based bionanocomposites reinforced with nanocrystalline cellulose for potential application as packaging material. Carbohydrate Polymers, 157. pp. 1323-1332. ISSN 01448617

Dasan, Y.K. and Bhat, A.H. and Faiz, A. (2017) Development and material properties of poly(lactic acid)/poly(3-hydroxybutyrate-co�3-hydroxyvalerate)-based nanocrystalline cellulose nanocomposites. Journal of Applied Polymer Science, 134 (5). ISSN 00218995

Dasan, Y.K. and Guan, B.H. and Zahari, M.H. and Chuan, L.K. (2017) Influence of La3+ substitution on structure, morphology and magnetic properties of nanocrystalline Ni-Zn ferrite. PLoS ONE, 12 (1). ISSN 19326203

Dass, S.C. and Lee, J. and Lee, K. and Park, J. (2017) Laplace based approximate posterior inference for differential equation models. Statistics and Computing, 27 (3). pp. 679-698. ISSN 09603174

Daud, S.A. and Mohd Shaber, N. and Mahmood, N.H. and Ramlee, M.H. (2017) Polygon 3D surface reconstruction using IR scanner. Communications in Computer and Information Science, 751. pp. 235-244. ISSN 18650929

Dehzangi, A. and Ghaffari, A.R. and Kakooei, S. and Ghasemi, M. and Saadati, F. and Soleimani, H. (2017) Investigation of charged particles radiation moving in a homogeneous dispersive medium. International Journal of Engineering, Transactions B: Applications, 30 (5). pp. 678-683. ISSN 1728144X

Dhanalakshmi, R. and Dominic, P.D.D. and Muruganantham, G. and Parthiban, P. (2017) ANT mobility model in wireless networks using network simulator. Journal of Scientific and Industrial Research, 76 (7). pp. 419-422. ISSN 00224456

Dharmowijoyo, D.B.E. and Susilo, Y.O. and Karlström, A. (2017) Analysing the complexity of day-to-day individual activity-travel patterns using a multidimensional sequence alignment model: A case study in the Bandung Metropolitan Area, Indonesia. Journal of Transport Geography, 64. pp. 1-12. ISSN 09666923

Dhuban, S.B. and Karuppanan, S. and Mengal, A.N. and Patil, S.S. (2017) Effect of fiber orientation and ply stacking sequence on buckling behaviour of basalt-carbon hybrid composite laminates. Indian Journal of Engineering and Materials Sciences, 24 (3). pp. 187-193. ISSN 09714588

Din, I.U. and Shaharun, M.S. and Naeem, A. and Tasleem, S. and Johan, M.R. (2017) Carbon nanofiber-based copper/zirconia catalyst for hydrogenation of CO2 to methanol. Journal of CO2 Utilization, 21. pp. 145-155. ISSN 22129820

Djuraev, U. and Jufar, S.R. and Vasant, P. (2017) A review on conceptual and practical oil and gas reservoir monitoring methods. Journal of Petroleum Science and Engineering, 152. pp. 586-601. ISSN 09204105

E

E Silva, F.A. and Pereira, J.F.B. and Kurnia, K.A. and Ventura, S.P.M. and Silva, A.M.S. and Rogers, R.D. and Coutinho, J.A.P. and Freire, M.G. (2017) Temperature dependency of aqueous biphasic systems: An alternative approach for exploring the differences between Coulombic-dominated salts and ionic liquids. Chemical Communications, 53 (53). pp. 7298-7301. ISSN 13597345

Edara, G. and Murthy, Y.V.V.S.N. and Sharma, K.V. and Pullela, S. (2017) Numerical modeling of a fuel droplet for the evaluation of ignition temperature considering transport properties. Case Studies in Thermal Engineering, 10. pp. 121-130. ISSN 2214157X

El-Adawy, M. and Heikal, M.R. and Aziz, A.R.A. and Siddiqui, M.I. and Abdul Wahhab, H.A. (2017) Experimental study on an IC engine in-cylinder flow using different steady-state flow benches. Alexandria Engineering Journal, 56 (4). pp. 727-736. ISSN 11100168

El-Adawy, M. and Heikal, M.R. and Aziz, A.R.A. and Siddiqui, M.I. and Munir, S. (2017) Characterization of the inlet port flow under steady-state conditions using PIV and POD. Energies, 10 (12). ISSN 19961073

Elangovan, D. and Arunkumar, G. and Indragandhi, V. and Venkatesh, S. and Kannan, R. (2017) Design and analysis of flyback micro inverter for integration of fuel cells with single phase grid. International Journal of Mechanical Engineering and Technology, 8 (11). pp. 220-228. ISSN 09766340

Elangovan, D. and Arunkumar, G. and Indragandhi, V. and Venkatesh, S. and Kannan, R. (2017) Design and analysis of flyback micro inverter for integration of fuel cells with single phase grid. International Journal of Mechanical Engineering and Technology, 8 (11). pp. 204-219. ISSN 09766340

Elgharbawy, A.A. and Alam, M.Z. and Kabbashi, N.A. and Moniruzzaman, M. and Jamal, P. (2017) Implementation of Definite Screening Design in Optimization of In Situ Hydrolysis of EFB in Cholinium Acetate and Locally Produced Cellulase Combined System. Waste and Biomass Valorization, 8 (3). pp. 839-850. ISSN 18772641

Elghool, A. and Basrawi, F. and Ibrahim, T.K. and Habib, K. and Ibrahim, H. and Idris, D.M.N.D. (2017) A review on heat sink for thermo-electric power generation: Classifications and parameters affecting performance. Energy Conversion and Management, 134. pp. 260-277. ISSN 01968904

Eltahir Mustafa, S.G.E. and Mannan, H.A. and Nasir, R. and Mohshim, D.F. and Mukhtar, H. (2017) Synthesis, characterization, and performance evaluation of PES/EDA-functionalized TiO2 mixed matrix membranes for CO2/CH4 separation. Journal of Applied Polymer Science, 134 (39). ISSN 00218995

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Mehrpouya, M. and Kakooei, S. and Moayedfar, M. and Zafar, A. (2017) A review of friction stir welding pin profile. Lecture Notes in Mechanical Engineering. pp. 1-18. ISSN 21954356

Emamian, S. and Hussain, P. and Awang, M. and Arumugam, T. and Yusof, F. and Saheed, M.S.M. and Mohamed, N.M. (2017) Comparison of carbon-based nanomaterials characteristics on H13 tool steel: Vergleich der Eigenschaften Kohlenstoff-basierter Nanomaterialien auf H13 Werkzeugstahl. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 198-204. ISSN 09335137

Emani, S. and Ramasamy, M. and Ku Shaari, K.Z. (2017) CFD modeling of asphaltenes deposition from crude oil through discrete phase simulations. Journal of Engineering and Applied Sciences, 12 (9). pp. 2383-2387. ISSN 1816949X

Emani, S. and Yusoh, N.A. and Gounder, R.M. and Shaari, K.Z.K. (2017) Effect of operating conditions on crude oil fouling through CFD simulations. International Journal of Heat and Technology, 35 (4). pp. 1034-1044. ISSN 03928764

Embong, A.M. and Yaacob, R.A.I.B.R. and Noor, A.M. and Sabian, N.A.A. and Ray, T.C. and Hong, N.T. (2017) Highland teenagers: Their understanding and practice towards water ecology. Journal of Engineering and Applied Sciences, 12 (12). pp. 3267-3271. ISSN 1816949X

Ezechi, E.H. and Nwabuko, C.G. and Enyinnaya, O.C. and Babington, C.J. (2017) Municipal solid waste management in Aba, Nigeria: Challenges and prospects. Environmental Engineering Research, 22 (3). pp. 231-236. ISSN 12261025

Ezechi, E.H. and Sapari, N. and Menyechi, E.J. and Ude, C.M. and Olisa, E. (2017) Treatment of produced water in a floating carrier bioreactor. Environmental Engineering Research, 22 (2). pp. 210-215. ISSN 12261025

F

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Mohamed, N.M. (2017) Performance analysis of long grooved journal bearing with slip, no-slip, and slip/no-slip textured surface configurations. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5794-5798. ISSN 18196608

Fauzi, A. and Nuruddin, M.F. and Malkawi, A.B. and Abdullah, M.M.A.B. and Mohammed, B.S. (2017) Effect of alkaline solution to fly ash ratio on geopolymer mortar properties. Key Engineering Materials, 733 KE. pp. 85-88. ISSN 10139826

Fazli, H. and Yassin, A.Y.M. and Shafiq, N. and Wee, T. (2017) The behavior of Carbon Fiber Reinforced Polymer (CFRP) strengthened beams under a marine environment. International Journal of GEOMATE, 13 (39). pp. 179-184. ISSN 21862982

Firmansyah and Aziz, A.R.A. and Heikal, M.R. and Zainal, E.Z.A. (2017) Diesel/CNG mixture autoignition control using fuel composition and injection gap. Energies, 10 (10). ISSN 19961073

Foong, O.-M. and Cheong, A.-L. and Yew, K.-H. (2017) Resqku: An emergency mobile application with audible sound frequency. Advanced Science Letters, 23 (11). pp. 11070-11073. ISSN 19366612

Foong, O.-M. and Low, T.J. and Hong, K.W. (2017) Simulation study of single quantum channel BB84 quantum key distribution. Lecture Notes in Electrical Engineering, 450. pp. 159-167. ISSN 18761100

Foong, O.-M. and Majid, N.S. (2017) Stroke999 for quick stroke screening. Far East Journal of Electronics and Communications, 17 (6). pp. 1553-1560. ISSN 09737006

Fosu-Duah, E. and Padmanabhan, E. and Gámez Vintaned, J.A. (2017) Micro-scale hydrocarbon distribution in organic-rich shales: A case study in the Union Springs Formation, Marcellus Subgroup (USA). Petroleum and Coal, 59 (5). pp. 641-652. ISSN 13377027

G

Gan, P.G. and Sam, S.T. and Bin Abdullah, M.F. and Bin Zulkepli, N.N. and Yeong, Y.F. (2017) Characterization of nanocrystalline cellulose isolated from empty fruit bunch using acid hydrolysis. Solid State Phenomena, 264 SS. pp. 9-12. ISSN 10120394

Gandhamal, A. and Talbar, S. and Gajre, S. and Hani, A.F.M. and Kumar, D. (2017) Local gray level S-curve transformation � A generalized contrast enhancement technique for medical images. Computers in Biology and Medicine, 83. pp. 120-133. ISSN 00104825

Gandhamal, A. and Talbar, S. and Gajre, S. and Razak, R. and Hani, A.F.M. and Kumar, D. (2017) Fully automated subchondral bone segmentation from knee MR images: Data from the Osteoarthritis Initiative. Computers in Biology and Medicine, 88. pp. 110-125. ISSN 00104825

Ganesan, T. and Elamvazuthi, I. (2017) A multi-objective approach for resilience-based plant design optimization. Quality Engineering, 29 (4). pp. 656-671. ISSN 08982112

Gardezi, S.J.S. and Faye, I. and Adjed, F. and Kamel, N. and Eltoukhy, M.M. (2017) Mammogram classification using curvelet GLCM texture features and GIST features. Advances in Intelligent Systems and Computing, 533. pp. 705-713. ISSN 21945357

Garg, S. and Murshid, G. and Mjalli, F.S. and Ahmad, W. (2017) Physical properties of aqueous blend of diethanolamine and sarcosine: Experimental and correlation study. Chemical Papers, 71 (10). pp. 1799-1807. ISSN 03666352

Garg, S. and Murshid, G. and Mjalli, F.S. and Ali, A. and Ahmad, W. (2017) Experimental and correlation study of selected physical properties of aqueous blends of potassium sarcosinate and 2-piperidineethanol as a solvent for CO2 capture. Chemical Engineering Research and Design, 118. pp. 121-130. ISSN 02638762

Garg, S. and Shariff, A.M. and Shaik, M.S. and Lal, B. and Aftab, A. and Faiqa, N. (2017) Measurement and prediction of the physical properties of an aqueous sodium salt of L-phenylalanine. Journal of the Serbian Chemical Society, 82 (7-8). pp. 905-919. ISSN 03525139

Garg, S. and Shariff, A.M. and Shaikh, M.S. and Lal, B. and Suleman, H. and Faiqa, N. (2017) Experimental data, thermodynamic and neural network modeling of CO2 solubility in aqueous sodium salt of l-phenylalanine. Journal of CO2 Utilization, 19. pp. 146-156. ISSN 22129820

George, J.M. and Wahab, M.M.A. and John, K.V. (2017) Estimation of aging effects of piles in malaysian offshore locations. Journal of Engineering Science and Technology, 12 (4). pp. 987-1000. ISSN 18234690

Ghaedi, H. and Ayoub, M. and Sufian, S. and Hailegiorgis, S.M. and Murshid, G. and Farrukh, S. and Khan, S.N. (2017) Experimental and prediction of volumetric properties of aqueous solution of (allyltriphenylPhosphonium bromide�Triethylene glycol) deep eutectic solvents. Thermochimica Acta, 657. pp. 123-133. ISSN 00406031

Ghaedi, H. and Ayoub, M. and Sufian, S. and Lal, B. and Shariff, A.M. (2017) Measurement and correlation of physicochemical properties of phosphonium-based deep eutectic solvents at several temperatures (293.15 K�343.15 K) for CO2 capture. Journal of Chemical Thermodynamics, 113. pp. 41-51. ISSN 00219614

Ghaedi, H. and Ayoub, M. and Sufian, S. and Lal, B. and Uemura, Y. (2017) Thermal stability and FT-IR analysis of Phosphonium-based deep eutectic solvents with different hydrogen bond donors. Journal of Molecular Liquids, 242. pp. 395-403. ISSN 01677322

Ghaedi, H. and Ayoub, M. and Sufian, S. and Murshid, G. and Farrukh, S. and Shariff, A.M. (2017) Investigation of various process parameters on the solubility of carbon dioxide in phosphonium-based deep eutectic solvents and their aqueous mixtures: Experimental and modeling. International Journal of Greenhouse Gas Control, 66. pp. 147-158. ISSN 17505836

Ghaedi, H. and Ayoub, M. and Sufian, S. and Shariff, A.M. and Hailegiorgis, S.M. and Khan, S.N. (2017) CO2 capture with the help of Phosphonium-based deep eutectic solvents. Journal of Molecular Liquids, 243. pp. 564-571. ISSN 01677322

Ghaedi, H. and Ayoub, M. and Sufian, S. and Shariff, A.M. and Lal, B. (2017) The study on temperature dependence of viscosity and surface tension of several Phosphonium-based deep eutectic solvents. Journal of Molecular Liquids, 241. pp. 500-510. ISSN 01677322

Ghaedi, H. and Ayoub, M. and Sufian, S. and Shariff, A.M. and Murshid, G. and Hailegiorgis, S.M. and Khan, S.N. (2017) Density, excess and limiting properties of (water and deep eutectic solvent) systems at temperatures from 293.15 K to 343.15 K. Journal of Molecular Liquids, 248. pp. 378-390. ISSN 01677322

Ghanem, O.B. and Mutalib, M.I.A. and Lévêque, J.-M. and El-Harbawi, M. (2017) Development of QSAR model to predict the ecotoxicity of Vibrio fischeri using COSMO-RS descriptors. Chemosphere, 170. pp. 242-250. ISSN 00456535

Ghasemi, M. and Ahmad, A. and Jafary, T. and Azad, A.K. and Kakooei, S. and Wan Daud, W.R. and Sedighi, M. (2017) Assessment of immobilized cell reactor and microbial fuel cell for simultaneous cheese whey treatment and lactic acid/electricity production. International Journal of Hydrogen Energy, 42 (14). pp. 9107-9115. ISSN 03603199

Gholami, Z. and Asmawati Mohd ZabiDi, N. and Gholami, F. and Ayodele, O.B. and Vakili, M. (2017) The influence of catalyst factors for sustainable production of hydrocarbons via Fischer-Tropsch synthesis. Reviews in Chemical Engineering, 33 (4). pp. 337-358. ISSN 01678299

Gilal, A.R. and Jaafar, J. and Abro, A. and Omar, M. and Basri, S. and Saleem, M.Q. (2017) Effective personality preferences of software programmer: A systematic review. Journal of Information Science and Engineering, 33 (6). pp. 1399-1416. ISSN 10162364

Gilal, A.R. and Jaafar, J. and Abro, A. and Umrani, W.A. and Basri, S. and Omar, M. (2017) Making programmer effective for software development teams: An extended study. Journal of Information Science and Engineering, 33 (6). pp. 1447-1463. ISSN 10162364

Gilani, S.E. and Al-Kayiem, H.H. and Woldemicheal, D.E. and Gilani, S.I. (2017) Performance enhancement of free convective solar air heater by pin protrusions on the absorber. Solar Energy, 151. pp. 173-185. ISSN 0038092X

Gilani, S.F.-U.-H. and Khir, M.H.B.M. and Ibrahim, R. and Kirmani, E.U.H. and Gilani, S.I.-U.-H. (2017) Modelling and development of a vibration-based electromagnetic energy harvester for industrial centrifugal pump application. Microelectronics Journal, 66. pp. 103-111. ISSN 00262692

Goh, C.M. and Subramaniam, R. and Saad, N.M. and Ali, S.A. and Meriaudeau, F. (2017) Subcutaneous veins depth measurement using diffuse reflectance images. Optics Express, 25 (21). pp. 25741-25759. ISSN 10944087

Gonfa, G. and Bustam, M.A. and Muhammad, N. and Ullah, S. (2017) Effect of task specific thiocyanate based ionic liquids on relative volatility of cyclohexane and benzene azeotropic mixture. Journal of Molecular Liquids, 238. pp. 208-214. ISSN 01677322

Goodwin, V. and Amnaphiang, P. and Thungngern, P. and Kah Shin, K. and Udomsap, P. and Chollacoop, N. (2017) Zeolite supported bimetallic catalyst system: The effect of metal loading for catalytic pyrolysis of jatropha residue. Key Engineering Materials, 751 KE. pp. 494-499. ISSN 10139826

Gopinath, S.C.B. and Perumal, V. and Balakrishnan, S.R. and Md Arshad, M.K. and Lakshmipriya, T. and Haarindraprasad, R. and Hashim, U. (2017) Aptamer-based determination of ATP by using a functionalized impedimetric nanosensor and mediation by a triangular junction transducer. Microchimica Acta, 184 (11). pp. 4425-4431. ISSN 00263672

Gopinath, S.C.B. and Perumal, V. and Rao, B.S. and Md Arshad, M.K. and Voon, C.H. and Lakshmipriya, T. and Haarindraprasad, R. and Vijayakumar, T. and Chen, Y. and Hashim, U. (2017) Voltammetric immunoassay for the human blood clotting factor IX by using nanogapped dielectrode junctions modified with gold nanoparticle-conjugated antibody. Microchimica Acta, 184 (10). pp. 3739-3745. ISSN 00263672

Gothandam, K.M. and Thakur, I.S. and Sukumaran, R.K. and Aguilar, C.N. and Yusup, S. (2017) International Conference on Current Trends in Biotechnology & post ICCB-2016 conference on Strategies for Environmental Protection and Management (ICSEPM-2016). Bioresource Technology, 242. p. 1. ISSN 09608524

Gurdeep Singh, H.K. and Yusup, S. and Abdullah, B. and Cheah, K.W. and Azmee, F.N. and Lam, H.L. (2017) Refining of crude rubber seed oil as a feedstock for biofuel production. Journal of Environmental Management, 203. pp. 1011-1016. ISSN 03014797

H

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. and Firmansyah and Mamat, R. (2017) Effect of fuel injection timing of hydrogen rich syngas augmented with methane in direct-injection spark-ignition engine. International Journal of Hydrogen Energy, 42 (37). pp. 23846-23855. ISSN 03603199

Hairul, N.A.H. and Shariff, A.M. and Bustam, M.A. (2017) Process behaviour in a packed absorption column for high pressure CO2 absorption from natural gas using PZ + AMP blended solution. Fuel Processing Technology, 157. pp. 20-28. ISSN 03783820

Hajian, A. and Yong, S.-P. (2017) Feature extraction from EEG data for a P300 based brain-computer interface. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10526 . pp. 39-50. ISSN 03029743

Hamdavi, S. and Rao, T.V.V.L.N. and Muhammad, M. and Faez, K.M. and Ya, H.H. (2017) Linear stability analysis of short journal bearing with an axial groove: Lineare Stabilitätsanalyse von Kurzgleitlagern mit einer axialen Nut. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 210-217. ISSN 09335137

Hamidi, M.F.F.A. and Harun, W.S.W. and Samykano, M. and Ghani, S.A.C. and Ghazalli, Z. and Ahmad, F. and Sulong, A.B. (2017) A review of biocompatible metal injection moulding process parameters for biomedical applications. Materials Science and Engineering C, 78. pp. 1263-1276. ISSN 09284931

Hamsan, M.H. and Shukur, M.F. and Kadir, M.F.Z. (2017) NH4NO3 as charge carrier contributor in glycerolized potato starch-methyl cellulose blend-based polymer electrolyte and the application in electrochemical double-layer capacitor. Ionics, 23 (12). pp. 3429-3453. ISSN 09477047

Hamza, M.F. and Sinnathambi, C.M. and Merican, Z.M.A. and Soleimani, H. and Stephen Karl, D. (2017) An overview of the present stability and performance of eor-foam. Sains Malaysiana, 46 (9). pp. 1641-1650. ISSN 01266039

Hanif, M.F. and Ul Mustafa, M.R. and Hashim, A.M. and Yusof, K.W. (2017) Impact of climate and anthropogenic changes on streamflows of Kinta River Basin. Advanced Science Letters, 23 (2). pp. 1412-1415. ISSN 19366612

Harilal, M. and Krishnan, S.G. and Yar, A. and Misnon, I.I. and Reddy, M.V. and Yusoff, M.M. and Dennis, J.O. and Jose, R. (2017) Pseudocapacitive charge storage in single-step-synthesized CoO-MnO2-MnCo2O4 hybrid nanowires in aqueous alkaline electrolytes. Journal of Physical Chemistry C, 121 (39). pp. 21171-21183. ISSN 19327447

Hasan, M.L. and Embong, A.M. and Mohamed, M.A. (2017) Field trip as a tool to motivate students to learn Geoscience subject. Advanced Science Letters, 23 (8). pp. 7562-7565. ISSN 19366612

Hasan, R. and Napiah, M. (2017) Pedestrians� behavior towards the use of footbridges under the impact of motivational alerting posters: The case of Ipoh city, Malaysia. Advances in Transportation Studies, 42. pp. 117-128. ISSN 18245463

Hasan, R. and Napiah, M. (2017) Utilization of footbridges: Influential factors and improvement proposals. Advances in Transportation Studies, 43. pp. 43-60. ISSN 18245463

Hasnain, S.A. and Nasif, M.S. and Pao, W. and Al-Waked, R. (2017) Numerical investigation of smoke contamination in atrium upper balconies at different down stand depths. Building Simulation, 10 (3). pp. 365-381. ISSN 19963599

Hassaan, M. and Bhattacharya, S.K. and Mathew, M.J. and Siddiqui, N.A. (2017) Cenozoic development of southwestern Malay Basin: new insights from subsidence analysis and thermal history. Arabian Journal of Geosciences, 10 (8). ISSN 18667511

Hassaballa, A.A. and Matori, A.-N. and Al-Gaadi, K.A. and Tola, E.H. and Madugundu, R. (2017) Sub-pixel analysis to enhance the accuracy of evapotranspiration determined using MODIS images. International Journal of Agricultural and Biological Engineering, 10 (2). pp. 103-113. ISSN 19346344

Hassan, M.A. and Komiyama, M. (2017) Catalytic Partial Oxidation of Methane in Supercritical Water: A Domain in CH4/H2O-O2/CH4 Parameter Space Showing Significant Methane Coupling. Industrial and Engineering Chemistry Research, 56 (23). pp. 6618-6624. ISSN 08885885

Hassan, M.A. and Malik, A.S. and Fofi, D. and Saad, N. and Karasfi, B. and Ali, Y.S. and Meriaudeau, F. (2017) Heart rate estimation using facial video: A review. Biomedical Signal Processing and Control, 38. pp. 346-360. ISSN 17468094

Hassan, M.A. and Malik, A.S. and Fofi, D. and Saad, N. and Meriaudeau, F. (2017) Novel health monitoring method using an RGB camera. Biomedical Optics Express, 8 (11). pp. 4838-4854. ISSN 21567085

Hassan, M.A. and Malik, A.S. and Fofi, D. and Saad, N.M. and Ali, Y.S. and Meriaudeau, F. (2017) Video-based heartbeat rate measuring method using ballistocardiography. IEEE Sensors Journal, 17 (14). pp. 4544-4557. ISSN 1530437X

Hassan, M.H. and Othman, A.R. (2017) Contribution of processing parameters on void content in the vacuum bagging configurations of L-shaped composite laminates. International Journal of Advanced Manufacturing Technology, 93 (1-4). pp. 1333-1345. ISSN 02683768

Hassan, M.H. and Othman, A.R. and Kamaruddin, S. (2017) A review on the manufacturing defects of complex-shaped laminate in aircraft composite structures. International Journal of Advanced Manufacturing Technology, 91 (9-12). pp. 4081-4094. ISSN 02683768

Hassan, M.H. and Othman, A.R. and Kamaruddin, S. (2017) The use of response surface methodology (RSM) to optimize the acid digestion parameters in fiber volume fraction test of aircraft composite structures. International Journal of Advanced Manufacturing Technology, 90 (9-12). pp. 3739-3748. ISSN 02683768

Hassan, R. and Marimuth, M. and Tariq, E. and Aqeel, R. (2017) Ethnic and gender diversity in top level management and firm performance: Shareholder's perspectives. Journal of International Women's Studies, 18 (4). pp. 1-12. ISSN 15398706

Hassan, R. and Marimuthu, M. (2017) Does corporate diversity really matter in the plantation sector? Empirical evidence from a world Islamic leading country and market reaction. International Journal of Financial Studies, 5 (3). ISSN 22277072

Hassan, S. and Khanesar, M.A. and Jaafar, J. and Khosravi, A. (2017) Comparative analysis of three approaches of antecedent part generation for an IT2 TSK FLS. Applied Soft Computing Journal, 51. pp. 130-144. ISSN 15684946

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Bingi, K. (2017) Adopting setpoint weighting strategy for wirelesshart networked control systems characterised by stochastic delay. IEEE Access, 5. pp. 25885-25896. ISSN 21693536

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Bingi, K. and Chung, T.D. (2017) Robustness and stability analysis of a predictive PI controller inwirelesshart network characterised by stochastic delay. International Journal of Electrical and Computer Engineering, 7 (5). pp. 2605-2613. ISSN 20888708

Hassan, S.M. and Ibrahim, R. and Saad, N. and Asirvadam, V.S. and Chung, T.D. (2017) A filtered predictive PI controller for wirelessHART networked control system. Control Engineering and Applied Informatics, 19 (4). pp. 13-24. ISSN 14548658

Hazwani Dzulkafli, H. and Ahmad, F. and Ullah, S. and Hussain, P. and Mamat, O. and Megat-Yusoff, P.S.M. (2017) Effects of talc on fire retarding, thermal degradation and water resistance of intumescent coating. Applied Clay Science, 146. pp. 350-361. ISSN 01691317

Hematpour, H. and Mahmood, S.M. and Akbari, S. and Nasr, N.H. (2017) Comparison study on sag foam model parameters in different reservoir simulators. Journal of Engineering and Applied Sciences, 12 (21). pp. 5373-5378. ISSN 1816949X

Heng, G.C. and Isa, M.H. and Lim, J.-W. and Ho, Y.-C. and Zinatizadeh, A.A.L. (2017) Enhancement of anaerobic digestibility of waste activated sludge using photo-Fenton pretreatment. Environmental Science and Pollution Research, 24 (35). pp. 27113-27124. ISSN 09441344

Hermana, M. and Ghosh, D.P. and Sum, C.W. (2017) Discriminating lithology and pore fill in hydrocarbon prediction from seismic elastic inversion using absorption attributes. Leading Edge, 36 (11). pp. 902-909. ISSN 1070485X

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Rao, T.V.V.L.N. (2017) Meshless Local B-Spline Collocation Method for Two-Dimensional Heat Conduction Problems With Nonhomogenous and Time-Dependent Heat Sources. Journal of Heat Transfer, 139 (7). ISSN 00221481

Hirol, H. and Noor, M.A.M. and Kasiman, E.H. and Hong, A.K.B. and Yusop, Z. and Yassin, A.Y.M. (2017) Meshless point interpolation formulation of kinematic wave equation for flood routing. Journal of Engineering and Applied Sciences, 12 (20). pp. 5286-5293. ISSN 1816949X

Hisham, A.A.B. and Nafea, M. and Aujih, A.B. and Ishak, M.H.I. and Abidin, M.S.Z. (2017) Racer: a simulated environment driving simulator to investigate human driving skill. Communications in Computer and Information Science, 752. pp. 534-547. ISSN 18650929

Hittawe, M.M. and Sidibé, D. and Beya, O. and Mériaudeau, F. (2017) Machine vision for timber grading singularities detection and applications. Journal of Electronic Imaging, 26 (6). ISSN 10179909

Hori, Y. and Yamamoto, H. and Suzuki, T. and Okitsu, J. and Nakamura, T. and Maeda, T. and Matsuo, T. and Bt Zabiri, H. and Tufa, L.D. and Marappagounder, R. (2017) Online anomaly detection of distillation tower system using adaptive resonance theory. Journal of Chemical Engineering of Japan, 50 (6Speci). pp. 430-438. ISSN 00219592

Hosseini, S.N. and Sabet, M. and Soleimani, H. and Ahmadi Eshkaftaki, H. (2017) Brine divalent ions impacts on wettability alteration of carbonate rock sample at presence of DTAB. Defect and Diffusion Forum, 380. pp. 191-197. ISSN 10120386

Husain, K. and Awang, A. (2017) A receiver-based forwarding scheme to minimize multipath formation in VANET. Advances in Intelligent Systems and Computing, 548. pp. 15-26. ISSN 21945357

Hussain, M. and Akhter, P. and Iqbal, J. and Ali, Z. and Yang, W. and Shehzad, N. and Majeed, K. and Sheikh, R. and Amjad, U.-E.-S. and Russo, N. (2017) VOCs photocatalytic abatement using nanostructured titania-silica catalysts. Journal of Environmental Chemical Engineering, 5 (4). pp. 3100-3107. ISSN 22133437

Hussain, M. and Tufa, L.D. and Yusup, S. and Zabiri, H. and Taqvi, S.A. (2017) Aspen plus® simulation studies of steam gasification in fluidized bed reactor for hydrogen production using palm kernel shell. Communications in Computer and Information Science, 751. pp. 628-641. ISSN 18650929

Hussain, M. and Yusof, K.W. and Mustafa, M.R. and Mahmood, R. and Shaofeng, J. (2017) Projected changes in temperature and precipitation in sarawak state of Malaysia for selected CMIP5 climate scenarios. International Journal of Sustainable Development and Planning, 12 (8). pp. 1299-1311. ISSN 17437601

Hussain, N. and Karsiti, M.N. and Yahya, N. and Jeoti, V. and Yahya, N. (2017) 2D wavelets Galerkin method for the computation of em field on seafloor excited by a point source. International Journal of Applied Electromagnetics and Mechanics, 53 (4). pp. 631-644. ISSN 13835416

Hussain, N.A.A. and Ali, S.S.A. and Saad, M.N.M. and Ovinis, M. and Nordin, N. and Adil, S.H. (2017) Underactuated nonlinear adaptive control approach using U-model incorporated with RBFNN for multivariable underwater glider control parameters. Indian Journal of Geo-Marine Sciences, 46 (12). pp. 2482-2492. ISSN 25826506

Hussain, Z. and Bashir, N. and Khan, M.I. and Hussain, K. and Sulaiman, S.A. and Naz, M.Y. and Ibrahim, K.A. and Abdel-Salam, N.M. (2017) Production of Highly Upgraded Bio-oils through Two-Step Catalytic Pyrolysis of Water Hyacinth. Energy and Fuels, 31 (11). pp. 12100-12107. ISSN 08870624

Hussain, Z. and Sulaiman, S.A. and Bashir, N. and Uddin, I. and Khan, K.M. and Perveen, S. and Naz, M.Y. (2017) Effect of pretreatment on product distribution of two-step catalytic pyrolysis of spirogyra. Environmental Progress and Sustainable Energy, 36 (3). pp. 775-780. ISSN 19447442

Hussein, A.M. and Kadirgama, K. and Sharma, K.V. and Ramasamy, D. and Bakar, R.A. (2017) Heat Transfer Enhancement with Nanofluids for Automotive Cooling. Topics in Mining, Metallurgy and Materials Engineering. pp. 71-100. ISSN 23643293

Hussein, S.A. and Tahir, A.S.M. and Awang, M. (2017) On amorphous phase formation in dissimilar friction stir welding of aluminum to steel. Lecture Notes in Mechanical Engineering. pp. 69-81. ISSN 21954356

I

Ibrahim, A.E. and Karsiti, M.N. and Elamvazuthi, I. (2017) Fuzzy logic system to control a spherical underwater robot vehicle (URV). International Journal of Simulation: Systems, Science and Technology, 17 (41). 12.1-12.7. ISSN 14738031

Ibrahim, K.A. and Naz, M.Y. and Sulaiman, S.A. and Ghaffar, A. and Jamil, Y. and Abdel-Salam, N.M. (2017) Effect of urea and borate plasticizers on rheological response of corn starch. Polymers, 9 (9). ISSN 20734360

Ibrahim, O. and Yahaya, N.Z. and Saad, N. and Ahmed, K.Y. (2017) Development of Observer State Output Feedback for Phase-Shifted Full Bridge DC-DC Converter Control. IEEE Access, 5. pp. 18143-18154. ISSN 21693536

Ibrahim, Z.B. and Mohd Nasir, N.A.A. and Othman, K.I. and Zainuddin, N. (2017) Adaptive order of block backward differentiation formulas for stiff ODEs. Numerical Algebra, Control and Optimization, 7 (1). pp. 95-106. ISSN 21553289

Idris, A. and Harahap, I.S.H. and Ali, M.O.A. (2017) An approach for time-dependent reliability analysis of Jackup structures. Cogent Engineering, 4 (1). ISSN 23311916

Idris, A. and Man, Z. and Maulud, A.S. (2017) Polycarbonate/silica nanocomposite membranes: Fabrication, characterization, and performance evaluation. Journal of Applied Polymer Science, 134 (38). ISSN 00218995

Idris, A. and Man, Z. and Maulud, A.S. and Khan, M.S. (2017) Effects of phase separation behavior on morphology and performance of polycarbonate membranes. Membranes, 7 (2). ISSN 20770375

Idris, A. and Man, Z. and Maulud, A.S. and Uddin, F. (2017) Modified Bruggeman models for prediction of CO2 permeance in polycarbonate/silica nanocomposite membranes. Canadian Journal of Chemical Engineering, 95 (12). pp. 2398-2409. ISSN 00084034

Idrus, H. (2017) Can oral communication strategies help improve oral presentation skills? Advanced Science Letters, 23 (8). pp. 7682-7685. ISSN 19366612

Ilyas, S.U. and Pendyala, R. and Marneni, N. (2017) Stability of Nanofluids. Topics in Mining, Metallurgy and Materials Engineering. pp. 1-31. ISSN 23643293

Ilyas, S.U. and Pendyala, R. and Narahari, M. (2017) Rheological behavior of mechanically stabilized and surfactant-free MWCNT-thermal oil-based nanofluids. International Communications in Heat and Mass Transfer, 87. pp. 250-255. ISSN 07351933

Ilyas, S.U. and Pendyala, R. and Narahari, M. (2017) Stability and thermal analysis of MWCNT-thermal oil-based nanofluids. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 527. pp. 11-22. ISSN 09277757

Ilyas, S.U. and Pendyala, R. and Narahari, M. (2017) An experimental study on the natural convection heat transfer in rectangular enclosure using functionalized alumina-thermal oil-based nanofluids. Applied Thermal Engineering, 127. pp. 765-775. ISSN 13594311

Ilyas, S.U. and Pendyala, R. and Narahari, M. and Susin, L. (2017) Stability, rheology and thermal analysis of functionalized alumina- thermal oil-based nanofluids for advanced cooling systems. Energy Conversion and Management, 142. pp. 215-229. ISSN 01968904

Imran, M. and Liew, M.S. and Nasif, M.S. and Niazi, U.M. and Yasreen, A. (2017) Hazard assessment studies on hydrocarbon fire and blast: An overview. Advanced Science Letters, 23 (2). pp. 1243-1247. ISSN 19366612

Imran Gulcharan, N.F. and Nor, N.M. and Ibrahim, T. and Daud, H. (2017) Power system state estimation bad data detection and identification: A review on issues and alternative formulations. Indonesian Journal of Electrical Engineering and Computer Science, 8 (1). pp. 122-128. ISSN 25024752

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2017) Economic analysis and optimization for bio-hydrogen production from oil palm waste via steam gasification. Energy Sources, Part B: Economics, Planning and Policy, 12 (2). pp. 158-165. ISSN 15567249

Iqbal, B. and Muhammad, N. and Jamal, A. and Ahmad, P. and Khan, Z.U.H. and Rahim, A. and Khan, A.S. and Gonfa, G. and Iqbal, J. and Rehman, I.U. (2017) An application of ionic liquid for preparation of homogeneous collagen and alginate hydrogels for skin dressing. Journal of Molecular Liquids, 243. pp. 720-725. ISSN 01677322

Iqbal, M.A. and Salim, A.M.A. and Siddiqui, N.A. and Baioumy, H. and Ali, S.H. (2017) Petrographic investigations and reservoir potential of shallow marine sandstone: A case study from Nyalau Formation, Sarawak Basin, Malaysia. ARPN Journal of Engineering and Applied Sciences, 12 (21). pp. 6255-6264. ISSN 18196608

Iqbal, M.J. and Faye, I. and Said, A.M.D. and Samir, B.B. (2017) Computational Technique for an Efficient Classification of Protein Sequences With Distance-Based Sequence Encoding Algorithm. Computational Intelligence, 33 (1). pp. 32-55. ISSN 08247935

Iqbal, O. and Ahmad, M. and Abd Kadir, A.P.A. (2017) Geomechanical characterization of potential roseneath shale gas, Cooper basin, Australia. ARPN Journal of Engineering and Applied Sciences, 12 (17). pp. 5221-5231. ISSN 18196608

Irfan, M. and Moniruzzaman, M. and Ahmad, T. and Mandal, P.C. and Bhattacharjee, S. and Abdullah, B. (2017) Ionic liquid based extraction of flavonoids from Elaeis guineensis leaves and their applications for gold nanoparticles synthesis. Journal of Molecular Liquids, 241. pp. 270-278. ISSN 01677322

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2017) Condition monitoring of induction motors via instantaneous power analysis. Journal of Intelligent Manufacturing, 28 (6). pp. 1259-1267. ISSN 09565515

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Magzoub, M. (2017) An Online Fault Diagnosis System for Induction Motors via Instantaneous Power Analysis. Tribology Transactions, 60 (4). pp. 592-604. ISSN 10402004

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Nor, N.M. and Alwadie, A. and Sheikh, M.A. (2017) A hardware and software integration approach for development of a non-invasive condition monitoring systems for motor-coupled gears faults diagnosis. Communications in Computer and Information Science, 751. pp. 642-655. ISSN 18650929

Irfan, S.A. and Razali, R. and KuShaari, K. and Mansor, N. (2017) Reaction-multi diffusion model for nutrient release and autocatalytic degradation of pla-coated controlled-release fertilizer. Polymers, 9 (3). ISSN 20734360

Irfan Khan, M. and Khan, H.U. and Azizli, K. and Sufian, S. and Man, Z. and Siyal, A.A. and Muhammad, N. and Faiz ur Rehman, M. (2017) The pyrolysis kinetics of the conversion of Malaysian kaolin to metakaolin. Applied Clay Science, 146. pp. 152-161. ISSN 01691317

Irshad, K. and Habib, K. and Basrawi, F. and Saha, B.B. (2017) Study of a thermoelectric air duct system assisted by photovoltaic wall for space cooling in tropical climate. Energy, 119. pp. 504-522. ISSN 03605442

Irshad, K. and Habib, K. and Kareem, M.W. and Basrawi, F. and Saha, B.B. (2017) Evaluation of thermal comfort in a test room equipped with a photovoltaic assisted thermo-electric air duct cooling system. International Journal of Hydrogen Energy, 42 (43). pp. 26956-26972. ISSN 03603199

Irshad, S. and Rambli, D.R.A. (2017) Advances in mobile augmented reality from user experience perspective: A review of studies. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10645 . pp. 466-477. ISSN 03029743

Isa, F. and Zabiri, H. and Ramasamy, M. and Tufa, L.D. and Shariff, A.M. and Saleh, S.F. (2017) Pressure modification index based on hydrodynamics and mass transfer effects for modeling of CO2 removal from natural gas via absorption at high pressures. International Journal of Greenhouse Gas Control, 56. pp. 173-186. ISSN 17505836

Isa, F. and Zabiri, H. and Singh, S.K.M. and Shariff, A.M. (2017) Dynamic modelling for high pressure CO2 Absorption from Natural Gas. Communications in Computer and Information Science, 752. pp. 261-271. ISSN 18650929

Isha, A.S.N.B. and Sabir, A.A. and Ghazali, Z.B. and Sharif, M.A.B.M. and Ishak, S.Z. (2017) Proposing a quick assessment tool for heavy vehicle commercial drivers� fatigue in oil and gas industry of Malaysia. Advanced Science Letters, 23 (8). pp. 7742-7745. ISSN 19366612

Islam, B. and Baharudin, Z. and Nallagownden, P. (2017) Development of chaotically improved meta-heuristics and modified BP neural network-based model for electrical energy demand prediction in smart grid. Neural Computing and Applications, 28. pp. 877-891. ISSN 09410643

Islam, B. and Baharudin, Z. and Nallagownden, P. (2017) Modified meta heuristics and improved backpropagation neural network-based electrical load demand prediction technique for smart grid. IEEJ Transactions on Electrical and Electronic Engineering, 12. S20-S32. ISSN 19314973

Ismaeel, A. and Al-Kayiem, H. and Baheta, A. and Aurybi, M. (2017) Numerical analysis on the influence of inflow guide vanes in a solar vortex power generator. WIT Transactions on Ecology and the Environment, 224 (1). pp. 553-563. ISSN 1746448X

Ismaeel, A.A. and Al-Kayiem, H.H. and Baheta, A.T. and Aurybi, M.A. (2017) Review and comparative analysis of vortex generation systems for sustainable electric power production. IET Renewable Power Generation, 11 (13). pp. 1613-1624. ISSN 17521416

Ismail, I. and Halim, A.H. (2017) Comparative study of meta-heuristics optimization algorithm using benchmark function. International Journal of Electrical and Computer Engineering, 7 (3). pp. 1643-1650. ISSN 20888708

Ismail, S. and Mansor, N. and Man, Z. and Azizli, K.A. (2017) Characterization of tapioca starch plasticized by 1-ethyl-3-methylimidazolium acetate. Jurnal Teknologi, 79 (5-3). pp. 1-7. ISSN 01279696

J

Jaber, A.K. and Awang, M.B. (2017) Field-scale investigation of different miscible CO2-injection modes to improve oil recovery in a clastic highly heterogeneous reservoir. Journal of Petroleum Exploration and Production Technology, 7 (1). pp. 125-146. ISSN 21900558

Jaber, A.K. and Awang, M.B. and Lenn, C.P. (2017) Box-Behnken design for assessment proxy model of miscible CO2-WAG in heterogeneous clastic reservoir. Journal of Natural Gas Science and Engineering, 40. pp. 236-248. ISSN 18755100

Jafary, T. and Daud, W.R.W. and Ghasemi, M. and Kim, B.H. and Bakar, M.H.A. and Jahim, J.M. and Ismail, M. and Satar, I. and Kamaruzzaman, M.A. (2017) Assessment of recirculation batch mode of operation in bioelectrochemical system; a way forward for cleaner production of energy and waste treatment. Journal of Cleaner Production, 142. pp. 2544-2555. ISSN 09596526

Jafary, T. and Daud, W.R.W. and Ghasemi, M. and Kim, B.H. and Carmona-Martínez, A.A. and Bakar, M.H.A. and Jahim, J.M. and Ismail, M. (2017) A comprehensive study on development of a biocathode for cleaner production of hydrogen in a microbial electrolysis cell. Journal of Cleaner Production, 164. pp. 1135-1144. ISSN 09596526

Jagabar Sathik, M.A. and Abdel Aleem, S.H.E. and Kannan, R. and Zobaa, A.F. (2017) A New Switched DC-Link Capacitor-based Multi-level Converter (SDC2MLC). Electric Power Components and Systems, 45 (9). pp. 1001-1015. ISSN 15325008

Jagindar Singh, K.S.M. and Elamvazuthi, I. and Shaari, K.Z.K. and Pranavanand, S. (2017) Tuning of PID controller for DC servo motor using improved Cuckoo search algorithm. International Journal of Simulation: Systems, Science and Technology, 18 (2). 6.1-6.9. ISSN 14738031

Jahan, S. and Sakidin, H. and Nazar, R. and Pop, I. (2017) Boundary layer flow of nanofluid over a moving surface in a flowing fluid using revised model with stability analysis. International Journal of Mechanical Sciences, 131-13. pp. 1073-1081. ISSN 00207403

Jahan, S. and Sakidin, H. and Nazar, R. and Pop, I. (2017) Flow and heat transfer past a permeable nonlinearly stretching/shrinking sheet in a nanofluid: A revised model with stability analysis. Journal of Molecular Liquids, 233. pp. 211-221. ISSN 01677322

Jalal, A. and Shafiq, N. and Nikbakht, E. and Kumar, R. and Zahid, M. (2017) Mechanical properties of hybrid basalt-polyvinyl alcohol (PVA) fiber reinforced concrete. Key Engineering Materials, 744 74. pp. 3-7. ISSN 10139826

Jamil, A. and Ching, O.P. and Shariff, A.M. (2017) Mixed matrix hollow fibre membrane comprising polyetherimide and modified montmorillonite with improved filler dispersion and CO2/CH4 separation performance. Applied Clay Science, 143. pp. 115-124. ISSN 01691317

Janjuhah, H.T. and G�mez Vintaned, J.A. and Salim, A.M.A. and Faye, I. and Shah, M.M. and Ghosh, D.P. (2017) Microfacies and Depositional Environments of Miocene Isolated Carbonate Platforms from Central Luconia, Offshore Sarawak, Malaysia. Acta Geologica Sinica (English Edition), 91 (5). pp. 1778-1796. ISSN 10009515

Janjuhah, H.T. and Salim, A.M.A. and Shah, M.M. and Ghosh, D. and Alansari, A. (2017) Quantitative interpretation of carbonate reservoir rock using wireline logs: a case study from Central Luconia, offshore Sarawak, Malaysia. Carbonates and Evaporites, 32 (4). pp. 591-607. ISSN 08912556

Javaid, M.U. and Isha, A.S.N. and Ghazali, Z. (2017) Brief communication on psychosocial work environment and wellbeing in relation to job demands-resources: A study on Malaysian public health perspective. Pertanika Journal of Social Sciences and Humanities, 25 (1). pp. 39-44. ISSN 01287702

Javaid, M.Y. and Ovinis, M. and Hashim, F.B.M. and Maimun, A. and Ahmed, Y.M. and Ullah, B. (2017) Effect of wing form on the hydrodynamic characteristics and dynamic stability of an underwater glider. International Journal of Naval Architecture and Ocean Engineering, 9 (4). pp. 382-389. ISSN 20926782

Javaid, M.Y. and Ovinis, M. and Hashim, F.B.M. and Maimun, A. and Ahmed, Y.M. and Ullah, B. (2017) Pure heaving and pure pitching motion of an underwater glider. Advanced Science Letters, 23 (2). pp. 1388-1392. ISSN 19366612

Javaid, M.Y. and Ovinis, M. and Thirumalaiswamy, N. and Hashim, F.B.M. and Ullah, B. and Maimun, A. (2017) Numerical investigation on the hydrodynamic characteristics of an autonomous underwater glider with different wing layouts. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2588-2592. ISSN 18196608

Javed, E. and Faye, I. and Malik, A.S. and Abdullah, J.M. (2017) Removal of BCG artefact from concurrent fMRI-EEG recordings based on EMD and PCA. Journal of Neuroscience Methods, 291. pp. 150-165. ISSN 01650270

Jawad, Z.A. and Ahmad, A.L. and Low, S.C. and Seng, E.W.T. and Soh, C.F.B. and Sugu, L. and Chew, T.L. (2017) Binding stability of β-CD on MWCNTS: Role of washing cycle on the β-CD coating. Journal of Physical Science, 28. pp. 145-153. ISSN 16753402

Jeremiah, S.S. and Narayanasamy, A. and Zabiri, H. and Gounder, R.M. (2017) Analysis of constraint modification in model-based control valve stiction compensation. Jurnal Teknologi, 79 (7). pp. 83-89. ISSN 01279696

Jessam, R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2017) CFD simulation of flow control with energy promoters in S-shaped diffuser. ARPN Journal of Engineering and Applied Sciences, 12 (7). pp. 2363-2367. ISSN 18196608

Jiwa, M.Z. and Kim, D.K. and Mustaffa, Z. and Choi, H.S. (2017) A systematic approach to pipe-in-pipe installation analysis. Ocean Engineering, 142. pp. 478-490. ISSN 00298018

Johl, S.K. and Salami, O.L. (2017) Sustainability and corporate governance an investigation on firm performance: A study on Malaysian public listed firms. Advanced Science Letters, 23 (1). pp. 540-544. ISSN 19366612

Jumbri, K. and Micaelo, N.M. and Abdul Rahman, M.B. (2017) Solvation free energies of nucleic acid bases in ionic liquids. Molecular Simulation, 43 (1). pp. 19-27. ISSN 08927022

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and M. Shariff, A. (2017) Enhanced gas separation performance using mixed matrix membranes containing zeolite T and 6FDA-durene polyimide. Journal of Membrane Science, 525. pp. 175-186. ISSN 03767388

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and M. Shariff, A. (2017) Fabrication of silanated zeolite T/6FDA-durene composite membranes for CO2/CH4 separation. Journal of Cleaner Production, 166. pp. 1043-1058. ISSN 09596526

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and M. Shariff, A. (2017) Transport properties of mixed matrix membranes encompassing zeolitic imidazolate framework 8 (ZIF-8) nanofiller and 6FDA-durene polymer: Optimization of process variables for the separation of CO2from CH4. Journal of Cleaner Production, 149. pp. 80-95. ISSN 09596526

Jusoh, N. and Yeong, Y.F. and Mohamad, M. and Lau, K.K. and Shariff, A.M. (2017) Rapid-synthesis of zeolite T via sonochemical-assisted hydrothermal growth method. Ultrasonics Sonochemistry, 34. pp. 273-280. ISSN 13504177

K

Kadhim, S.K. and Nasif, M.S. and Al-Kayiem, H.H. and Nagarajan, T. and Al Waked, R. (2017) Numerical investigation on the effect of blood flow induced vibration on bileflet artificial heart valve by using fluid structure interaction technique. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2561-2565. ISSN 18196608

Kakooei, S. and Ismail, M.C. and Raja, B. and Mohebbi, H. and Emamian, S.S. and Moayedfar, M. (2017) Formation of nano-scale FeCO3 protective corrosion product in carbon dioxide-saturated 3 sodium chloride solution. Key Engineering Materials, 740 KE. pp. 3-8. ISSN 10139826

Kamal, S. and Sharma, K.V. and Srinivasa Rao, P. and Mamat, O. (2017) Thermal Spray Coatings for Hot Corrosion Resistance. Topics in Mining, Metallurgy and Materials Engineering. pp. 235-268. ISSN 23643293

Kamble, R. and Kokare, M. and Deshmukh, G. and Hussin, F.A. and Mériaudeau, F. (2017) Localization of optic disc and fovea in retinal images using intensity based line scanning analysis. Computers in Biology and Medicine, 87. pp. 382-396. ISSN 00104825

Kang, C.H. and Obama, M.P.E.M. and Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Facile formation of interconnected multi-walled carbon nanotube-graphene nanocomposite for nanoelectronics applications. Key Engineering Materials, 744 74. pp. 433-437. ISSN 10139826

Kannan, R. and Aizuddin, M. and Romlie, M.F. (2017) Design and implementation of material characteristics for capacitive coupling wireless power transfer system. International Journal of Applied Engineering Research, 12 (5). pp. 797-803. ISSN 09734562

Kannan, R. and Lokesh, N. and Hasan, K.N.M. and Aravind, C.V. (2017) Implementation of one cycle controller for single phase bi-directional converter. International Journal of Applied Engineering Research, 12 (6). pp. 804-812. ISSN 09734562

Kareem, M.W. and Gilani, S.I. and Habib, K. and Irshad, K. and Saha, B.B. (2017) Performance analysis of a multi-pass solar thermal collector system under transient state assisted by porous media. Solar Energy, 158. pp. 782-791. ISSN 0038092X

Kareem, M.W. and Habib, K. and Ruslan, M.H. and Saha, B.B. (2017) Thermal performance study of a multi-pass solar air heating collector system for drying of Roselle (Hibiscus sabdariffa). Renewable Energy, 113. pp. 281-292. ISSN 09601481

Kareem, M.W. and Habib, K. and Sopian, K. and Ruslan, M.H. (2017) Multi-pass solar air heating collector system for drying of screw-pine leaf (Pandanus tectorius). Renewable Energy, 112. pp. 413-424. ISSN 09601481

Kaur, J. and Ahmad, F. and Ullah, S. and Yusoff, P.S.M.M. and Ahmad, R. (2017) The Role of Bentonite Clay on Improvement in Char Adhesion of Intumescent Fire-Retardant Coating with Steel Substrate. Arabian Journal for Science and Engineering, 42 (5). pp. 2043-2053. ISSN 2193567X

Kazmi, D. and Qasim, S. and Harahap, I.S.H. and Baharom, S. (2017) Landslide of Highland Towers 1993: a case study of Malaysia. Innovative Infrastructure Solutions, 2 (1). ISSN 23644176

Kazmi, D. and Qasim, S. and Harahap, I.S.H. and Baharom, S. (2017) A Probabilistic Study for the Analysis of the Risks of Slope Failure by Applying HEART Technique. Geotechnical and Geological Engineering, 35 (6). pp. 2991-3003. ISSN 09603182

Kazmi, D. and Qasim, S. and Harahap, I.S.H. and Vu, T.H. (2017) Analytical study of the causes of the major landslide of Bukit Antarabangsa in 2008 using fault tree analysis. Innovative Infrastructure Solutions, 2 (1). ISSN 23644176

Khalil, A.E. and Nawawi, M. and Wagner, K. and Baioumy, H. and Kayode, J.S. and Ishola, K. and Rahman, A.A. and Aiffin, M.H. (2017) Application of time domain electromagnetic and magnetic gradiometer techniques to delineate water leakage site along buried iron pipe at Sungai Klah Perak Malaysia. Advanced Science Letters, 23 (2). pp. 1340-1343. ISSN 19366612

Khalil, I. and Aziz, A.R.A. and Yusup, S. and Heikal, M. and El-Adawy, M. (2017) Response surface methodology for the optimization of the production of rubber seed/palm oil biodiesel, IDI diesel engine performance, and emissions. Biomass Conversion and Biorefinery, 7 (1). pp. 37-49. ISSN 21906815

Khan, A. and Ali, S.S.A. and Meriaudeau, F. and Malik, A.S. and Soon, L.S. and Seng, T.N. (2017) Visual feedback�based heading control of autonomous underwater vehicle for pipeline corrosion inspection. International Journal of Advanced Robotic Systems, 14 (3). ISSN 17298806

Khan, A.S. and Man, Z. and Arvina, A. and Bustam, M.A. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Muhammad, N. (2017) Dicationic imidazolium based ionic liquids: Synthesis and properties. Journal of Molecular Liquids, 227. pp. 98-105. ISSN 01677322

Khan, A.S. and Man, Z. and Bustam, M.A. and Gonfa, G. and Chong, F.K. and Ullah, Z. and Nasrullah, A. and Sarwono, A. and Ahmad, P. and Muhammad, N. (2017) Effect of Structural Variations on the Thermophysical Properties of Protic Ionic Liquids: Insights from Experimental and Computational Studies. Journal of Chemical and Engineering Data, 62 (10). pp. 2993-3003. ISSN 00219568

Khan, F.U. and Asimullah and Khan, S.B. and Kamal, T. and Asiri, A.M. and Khan, I.U. and Akhtar, K. (2017) Novel combination of zero-valent Cu and Ag nanoparticles @ cellulose acetate nanocomposite for the reduction of 4-nitro phenol. International Journal of Biological Macromolecules, 102. pp. 868-877. ISSN 01418130

Khan, H. and Dominic, P.D.D. (2017) Performance measure of online system acceptance and customer satisfaction through airlines websites in Malaysia. International Journal of Business Innovation and Research, 12 (4). pp. 508-524. ISSN 17510252

Khan, I. and Shah, N.A. and Dennis, L.C.C. (2017) A scientific report on heat transfer analysis in mixed convection flow of Maxwell fluid over an oscillating vertical plate. Scientific Reports, 7. ISSN 20452322

Khan, I. and Usmani, M.A. and Bhat, A.H. and Rather, J.A. and Hassan, S.I. and Mumam, A. (2017) Recent progress on rubber based biocomposites: From carbon nanotubes to ionic liquids. Green Energy and Technology (978331). pp. 91-123. ISSN 18653529

Khan, J. and Malik, A.S. and Kamel, N. and Dass, S.C. and Affandi, A.M. (2017) Automated system for acne vulgaris grading using self-organizing map. Journal of Medical Imaging and Health Informatics, 7 (8). pp. 1705-1713. ISSN 21567018

Khan, M.S. and Bavoh, C.B. and Partoon, B. and Lal, B. and Bustam, M.A. and Shariff, A.M. (2017) Thermodynamic effect of ammonium based ionic liquids on CO2 hydrates phase boundary. Journal of Molecular Liquids, 238. pp. 533-539. ISSN 01677322

Khan, M.S. and Partoon, B. and Bavoh, C.B. and Lal, B. and Mellon, N.B. (2017) Influence of tetramethylammonium hydroxide on methane and carbon dioxide gas hydrate phase equilibrium conditions. Fluid Phase Equilibria, 440. pp. 1-8. ISSN 03783812

Khan, M.Y. and Karim, Z.A.A. and Aziz, A.R.A. and Tan, I.M. (2017) A case study on the influence of selected parameters on microexplosion behavior of water in biodiesel emulsion droplets. Journal of Energy Resources Technology, Transactions of the ASME, 139 (2). ISSN 01950738

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Shariff, A.M. and Garg, S. (2017) Thermophysical properties of aqueous N-methyldiethanolamine (MDEA) and ionic liquids 1-butyl-3-methylimidazolium trifluoromethanesulfonate bmimOTf, 1-butyl-3-methylimidazolium acetate bmimAc hybrid solvents for CO2 capture. Chemical Engineering Research and Design, 121. pp. 69-80. ISSN 02638762

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Shariff, A.M. and Garg, S. (2017) Thermophysical properties of concentrated aqueous solution of N-methyldiethanolamine (MDEA), piperazine (PZ), and ionic liquids hybrid solvent for CO2 capture. Journal of Molecular Liquids, 229. pp. 221-229. ISSN 01677322

Khan, T. and Mustafa, M.R.U. and Isa, M.H. and Manan, T.S.B.A. and Ho, Y.-C. and Lim, J.-W. and Yusof, N.Z. (2017) Artificial Neural Network (ANN) for Modelling Adsorption of Lead (Pb (II)) from Aqueous Solution. Water, Air, and Soil Pollution, 228 (11). ISSN 00496979

Khan, Z. and Razali, R.B. and Daud, H. and Nor, N.M. and Firuzabad, M.F. and Krebs, K.L. (2017) A new robust computational approach for the electric power system parameters. Journal of Computational and Theoretical Nanoscience, 14 (3). pp. 1613-1620. ISSN 15461955

Khan, Z. and Razalia, R. and Daud, H. and Norc, N.M. and Firuzabad, M.F. (2017) The evaluation of the confidence intervals for the state parameters of a DC power system. Journal of Engineering and Applied Sciences, 12 (18). pp. 4544-4550. ISSN 1816949X

Khanh, D.V.K. and Vasant, P.M. and Elamvazuthi, I. and Dieu, V.N. (2017) Geometric optimisation of thermo-electric coolers using simulated annealing. International Journal of Computational Science and Engineering, 14 (3). pp. 279-289. ISSN 17427185

Khoa, T.H. and Vasant, P.M. and Singh, B.S.M. and Dieu, V.N. (2017) Hybrid mean-variance mapping optimization for non-convex economic dispatch problems. International Journal of Swarm Intelligence Research, 8 (4). pp. 34-59. ISSN 19479263

Khoa, T.H. and Vasant, P.M. and Singh, M.S.B. and Dieu, V.N. (2017) Swarm based mean-variance mapping optimization for convex and non-convex economic dispatch problems. Memetic Computing, 9 (2). pp. 91-108. ISSN 18659284

Kim, D.K. and Lim, H.L. and Kim, M.S. and Hwang, O.J. and Park, K.S. (2017) An empirical formulation for predicting the ultimate strength of stiffened panels subjected to longitudinal compression. Ocean Engineering, 140. pp. 270-280. ISSN 00298018

Kim, D.K. and Zalaya, M.A. and Mohd, M.H. and Choi, H.S. and Park, K.S. (2017) Safety assessment of corroded jacket platform considering decommissioning event. International Journal of Automotive and Mechanical Engineering, 14 (3). pp. 4462-4485. ISSN 22298649

Kiu, S.S.K. and Yusup, S. and Soon, C.V. and Arpin, T. and Samion, S. and Kamil, R.N.M. (2017) Tribological investigation of graphene as lubricant additive in vegetable oil. Journal of Physical Science, 28. pp. 257-267. ISSN 16753402

Kolandaisamy, I. and Marimuthu, M. and Maran, K. and Sulasi, S. and Fahmida (2017) Small businesses and effect of capital structure: A conceptual review. International Journal of Economic Research, 14 (19). pp. 365-370. ISSN 09729380

Krishnan, S.G. and Harilal, M. and Yar, A. and Vijayan, B.L. and Dennis, J.O. and Yusoff, M.M. and Jose, R. (2017) Critical influence of reduced graphene oxide mediated binding of M (MÂ =Â Mg, Mn) with Co ions, chemical stability and charge storability enhancements of spinal-type hierarchical MCo2O4 nanostructures. Electrochimica Acta, 243. pp. 119-128. ISSN 00134686

Kumar, R. and Mohd Yaseen, A.Y.B. and Shafiq, N. and Jalal, A. (2017) Influence of metakaolin, fly ash and nano silica on mechanical and durability properties of concrete. Key Engineering Materials, 744 74. pp. 8-14. ISSN 10139826

Kunjirama, M. and Saman, N. and Johari, K. and Song, S.-T. and Kong, H. and Cheu, S.-C. and Lye, J.W.P. and Mat, H. (2017) Adsorption affinity and selectivity of 3-ureidopropyltriethoxysilane grafted oil palm empty fruit bunches towards mercury ions. Environmental Science and Pollution Research, 24 (17). pp. 15167-15181. ISSN 09441344

Kurnia, J.C. and Sasmito, A.P. and Shamim, T. (2017) Performance evaluation of a PEM fuel cell stack with variable inlet flows under simulated driving cycle conditions. Applied Energy, 206. pp. 751-764. ISSN 03062619

Kurnia, J.C. and Sasmito, A.P. and Xu, P. and Mujumdar, A.S. (2017) Performance and potential energy saving of thermal dryer with intermittent impinging jet. Applied Thermal Engineering, 113. pp. 246-258. ISSN 13594311

Kusbiantoro, A. and Embong, R. and Shafiq, N. (2017) Adaptation of eco-friendly approach in the production of soluble pozzolanic material. International Journal of Design and Nature and Ecodynamics, 12 (2). pp. 246-253. ISSN 17557437

L

Lai, G.T. and Mazlan, N.A. and Nadzir, M.S.M. and Rafek, A.G. and Serasa, A.S. and Hussin, A. and Ern, L.K. and Yeok, F.S. (2017) Uniaxial compressive strength of Antarctic Peninsula rocks: Schmidt hammer rebound test. Sains Malaysiana, 46 (5). pp. 677-684. ISSN 01266039

Lai, K.X. and Kim, D.K. and Chin Wong, E.W. (2017) Effect of vortex induced vibration on fatigue damage of top-tensioned riser subjected to current load. ARPN Journal of Engineering and Applied Sciences, 12 (16). pp. 4796-4803. ISSN 18196608

Lai, L.S. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2017) Single and Binary CO2/CH4 Separation of a Zeolitic Imidazolate Framework-8 Membrane. Chemical Engineering and Technology, 40 (6). pp. 1031-1042. ISSN 09307516

Lai, L.S. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2017) Synthesis of zeolitic imidazolate frameworks (ZIF)-8 membrane and its process optimization study in separation of CO2 from natural gas. Journal of Chemical Technology and Biotechnology, 92 (2). pp. 420-431. ISSN 02682575

Lakshmanan, S. and Murugesan, T. (2017) Chlorate adsorption from chlor-alkali plant brine stream. Water Science and Technology, 76 (1). pp. 87-94. ISSN 02731223

Lam, M.K. and Yusoff, M.I. and Uemura, Y. and Lim, J.W. and Khoo, C.G. and Lee, K.T. and Ong, H.C. (2017) Cultivation of Chlorella vulgaris using nutrients source from domestic wastewater for biodiesel production: Growth condition and kinetic studies. Renewable Energy, 103. pp. 197-207. ISSN 09601481

Langove, N. and Isha, A.S.N. (2017) Interpersonal conflict and turnover intention: The mediating role of psychological well-being. Advanced Science Letters, 23 (8). pp. 7695-7698. ISSN 19366612

Latiff, A.H.A. and Ghosh, D.P. and Latiff, N.M.A. (2017) Optimizing acquisition geometry in shallow gas cloud using particle swarm optimization approach. International Journal of Computational Intelligence Systems, 10 (1). pp. 1198-1210. ISSN 18756891

Lawrence, G.D. and Rahmat, R. and Makahleh, A. and Saad, B. (2017) Liquid Chromatographic Analysis of α-Dicarbonyls Using Girard-T Reagent Derivatives. Journal of Chromatographic Science, 55 (10). pp. 1043-1050. ISSN 00219665

Lebelo, R.S. and Okosun, K.O. and Mtunzi, F. and Muthuvalu, M.S. and Mahlobo, R.K. (2017) Thermal stability and reactant consumption analysis in a reactive cylinder of variable thermal conductivity. International Review of Mechanical Engineering, 11 (11). pp. 787-796. ISSN 19708734

Lee, H.C. and Liu, W.-W. and Chai, S.-P. and Mohamed, A.R. and Aziz, A. and Khe, C.-S. and Hidayah, N.M.S. and Hashim, U. (2017) Review of the synthesis, transfer, characterization and growth mechanisms of single and multilayer graphene. RSC Advances, 7 (26). pp. 15644-15693. ISSN 20462069

Lee, H.X. and Ahmad, F. and Saad, B. and Ismail, M.N. (2017) Evaluation of extraction methods for the identification of proteins from date palm (Phoenix dactylifera L.) seed and flesh. Preparative Biochemistry and Biotechnology, 47 (10). pp. 998-1007. ISSN 10826068

Lee, M.Y. and Ho, W.S. and Hashim, H. and Muis, Z.A. and Liu, W.H. and Rozali, N.E.M. and Klemeš, J.J. (2017) Application of electric system cascade analysis for various system configuration. Chemical Engineering Transactions, 61. pp. 943-948. ISSN 22839216

Lendik, L.S. and Chan, M.Y. and Renganathan, S. and Yap, N.T. (2017) Metaphor and the representations of health and illness among the Semai indigenous community in Malaysia. GEMA Online Journal of Language Studies, 17 (4). pp. 61-83. ISSN 16758021

Leong, K.-Y. and See, S. and Lim, J.-W. and Bashir, M.J.K. and Lam, M.-K. and Chew, T.-L. (2017) Interaction of key process variables acting on the simultaneous adsorption of phenolics in binary solution: trend and optimization of adsorption. Journal of Industrial Pollution Control, 33 (1). pp. 712-722. ISSN 09702083

Leong, K.-Y. and See, S. and Lim, J.-W. and Bashir, M.J.K. and Ng, C.-A. and Tham, L. (2017) Effect of process variables interaction on simultaneous adsorption of phenol and 4-chlorophenol: statistical modeling and optimization using RSM. Applied Water Science, 7 (4). pp. 2009-2020. ISSN 21905487

Levêque, J.-M. and Duclaux, L. and Rouzaud, J.-N. and Reinert, L. and Komatsu, N. and Desforges, A. and Afreen, S. and Sivakumar, M. and Kimura, T. (2017) Ultrasonic treatment of glassy carbon for nanoparticle preparation. Ultrasonics Sonochemistry, 35. pp. 615-622. ISSN 13504177

Lias, M.R. and Sharif, Z. and Awang, M. and Jailani, A. and Warap, H. (2017) Quasi-static modeling of spur gear time varying strength analysis. ARPN Journal of Engineering and Applied Sciences, 12 (6). pp. 1938-1947. ISSN 18196608

Liew, M.S. and Danyaro, K.U. and Mohamad, M. and Shawn, L.E. and Aulov, A. (2017) Ground Motion Prediction Equations for Malaysia Due to Subduction Zone Earthquakes in Sumatran Region. IEEE Access, 5. pp. 23920-23937. ISSN 21693536

Lim, E.H. and Wan Ahmad, W.F. and Hashim, A.S. (2017) Enhancement of learning management system by integrating learning styles and adaptive courses. Advances in Intelligent Systems and Computing, 532. pp. 211-218. ISSN 21945357

Lim, J.-W. and Beh, H.-G. and Ching, D.L.C. and Ho, Y.-C. and Baloo, L. and Bashir, M.J.K. and Wee, S.-K. (2017) Central Composite Design (CCD) applied for statistical optimization of glucose and sucrose binary carbon mixture in enhancing the denitrification process. Applied Water Science, 7 (7). pp. 3719-3727. ISSN 21905487

Liu, C. and Ghosh, D. (2017) A new seismic attribute for ambiguity reduction in hydrocarbon prediction. Geophysical Prospecting, 65 (1). pp. 229-239. ISSN 00168025

Lock, I.S.M. and Lock, S.S.M. and Vo, D.-V.N. and Abdullah, B. (2017) Influence of palladium on Ni-based catalyst for hydrogen production via thermo-catalytic methane decomposition. Chemical Engineering Transactions, 57. pp. 343-348. ISSN 22839216

Lock, S.S.M. and Lau, K.K. and Mash�al, A.-A.B. and Shariff, A.M. and Yeong, Y.F. and Mei, I.L.S. and Ahmad, F. (2017) Elucidation on the effect of operating temperature to the transport properties of polymeric membrane using molecular simulation tool. Communications in Computer and Information Science, 752. pp. 456-471. ISSN 18650929

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. (2017) Preliminary techno-economic and environmental assessment of thickness dependent physical aging in oxygen enriched combustion using polymeric membranes. Journal of Cleaner Production, 162. pp. 914-937. ISSN 09596526

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. (2017) Process Modelling and Optimization of Thickness Dependent Physical Aging in Polymeric Membranes. Computer Aided Chemical Engineering, 40. pp. 367-372. ISSN 15707946

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. (2017) Computational insights on the role of film thickness on the physical properties of ultrathin polysulfone membranes. RSC Advances, 7 (70). pp. 44376-44393. ISSN 20462069

Loh, S.L. and Lim, S.P. and Chong, S.H. and Ching, D.L.C. (2017) A new local search algorithm for minimum span frequency assignment in mobile communication. Communications in Computer and Information Science, 752. pp. 116-125. ISSN 18650929

Losetty, V. and Matheswaran, P. and Wilfred, C.D. (2017) Synthesis, thermophysical properties and COSMO-RS study of DBU based protic ionic liquids. Journal of Chemical Thermodynamics, 105. pp. 151-158. ISSN 00219614

Lotfi, M. and Moniruzzaman, M. and Sivapragasam, M. and Kandasamy, S. and Abdul Mutalib, M.I. and Alitheen, N.B. and Goto, M. (2017) Solubility of acyclovir in nontoxic and biodegradable ionic liquids: COSMO-RS prediction and experimental verification. Journal of Molecular Liquids, 243. pp. 124-131. ISSN 01677322

Lubis, A.M.H.S. and Ariwahjoedi, B. and Sudin, M. (2017) XPS characterization of tribo-layer formation on the steel lubricated with crude and epoxidized jatropha oil under boundary lubrication. Industrial Lubrication and Tribology, 69 (3). pp. 371-377. ISSN 00368792

M

Mahat, S.Q.A. and Mohd. Saaid, I. (2017) Development of anionic-cationic inhibitors for mitigating silicate scales during ASP flooding. Journal of Petroleum Science and Engineering, 149. pp. 701-706. ISSN 09204105

Mahdi, F.P. and Habib, M.M. and Ahad, M.A.R. and McKeever, S. and Moslehuddin, A.S.M. and Vasant, P. (2017) Face recognition-based real-time system for surveillance. Intelligent Decision Technologies, 11 (1). pp. 79-92. ISSN 18724981

Mahdi, F.P. and Vasant, P. and Abdullah-Al-Wadud, M. and Watada, J. and Kallimani, V. and Fai, P.Y.S. (2017) Quantum particle swarm optimization for economic dispatch problem using cubic function considering power loss constraint. International Journal of GEOMATE, 13 (7). pp. 44-50. ISSN 21862982

Mahesh, K. and Nallagownden, P. and Elamvazuthi, I. (2017) Multi-objective PSO based optimal placement of solar power DG in radial distribution system. Journal of Electrical Systems, 13 (2). pp. 322-331. ISSN 11125209

Mahesh, K. and Nallagownden, P. and Elamvazuthi, I. (2017) Optimal placement and sizing of distributed generators for voltage-dependent load model in radial distribution system. Renewable Energy Focus, 19-20. pp. 23-37. ISSN 17550084

Mahesh, K. and Nallagownden, P. and Elamvazuthi, I. (2017) Optimal placement and sizing of renewable distributed generations and capacitor banks into radial distribution systems. Energies, 10 (6). ISSN 19961073

Mahgoub, B.K.M. and Hassan, S. and Sulaiman, S.A. and Mamat, R. and Abdul Adam, A. and Hagos, F.Y. (2017) Combustion and performance of syngas dual fueling in a CI engine with blended biodiesel as pilot fuel. BioResources, 12 (3). pp. 5617-5631. ISSN 19302126

Mahgoub, M.I. and Padmanabhan, E. and Abdullatif, O.M. (2017) Seismic inversion as a predictive tool for porosity and facies delineation in Paleocene fluvial/lacustrine reservoirs, Melut Basin, Sudan. Marine and Petroleum Geology, 86. pp. 213-227. ISSN 02648172

Mahmood, H. and Moniruzzaman, M. and Iqbal, T. and Yusup, S. (2017) Effect of ionic liquids pretreatment on thermal degradation kinetics of agro-industrial waste reinforced thermoplastic starch composites. Journal of Molecular Liquids, 247. pp. 164-170. ISSN 01677322

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Muhammad, N. and Iqbal, T. and Akil, H.M. (2017) Ionic liquids pretreatment for fabrication of agro-residue/thermoplastic starch based composites: A comparative study with other pretreatment technologies. Journal of Cleaner Production, 161. pp. 257-266. ISSN 09596526

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Welton, T. (2017) Ionic liquids assisted processing of renewable resources for the fabrication of biodegradable composite materials. Green Chemistry, 19 (9). pp. 2051-2075. ISSN 14639262

Mahmoud, A.A. and Dass, S.C. and Muthuvalu, M.S. and Asirvadam, V.S. (2017) Maximum Likelihood Inference for Univariate Delay Differential Equation Models with Multiple Delays. Complexity, 2017. ISSN 10762787

Maizan, A.M. and Kuzilati, K. and Luqman, H.H. (2017) Droplet impact behaviour of modified alkali-activated material solution on urea surface. Journal of Engineering and Applied Sciences, 12 (10). pp. 2770-2776. ISSN 1816949X

Majeed, Z. and Mansor, N. and Ajab, Z. and Man, Z. (2017) Lignin macromolecule's implication in slowing the biodegradability of urea-crosslinked starch films applied as slow-release fertilizer. Starch/Staerke, 69 (11-12). ISSN 00389056

Majid, M.A.A. and Fudzin, F. (2017) Study on robots failures in automotive painting line. ARPN Journal of Engineering and Applied Sciences, 12 (1). pp. 62-67. ISSN 18196608

Majid, M.A.A. and Nordin, A. and Salim, D.A. (2017) Exergoeconomics model for power and chilled water cost rates of gas-fueled district cooling system. International Journal of Applied Engineering Research, 12 (21). pp. 10802-10808. ISSN 09734562

Malakahmad, A. and Abualqumboz, M.S. and Kutty, S.R.M. and Abunama, T.J. (2017) Assessment of carbon footprint emissions and environmental concerns of solid waste treatment and disposal techniques; case study of Malaysia. Waste Management, 70. pp. 282-292. ISSN 0956053X

Malakahmad, A. and Ho, L.L.H. (2017) UV/H2O2 oxidation process optimization by response surface methodology for removal of polycyclic aromatic hydrocarbons (PAHs) from water. Desalination and Water Treatment, 65. pp. 408-417. ISSN 19443994

Malakahmad, A. and Idrus, N.B. and Abualqumboz, M.S. and Yavari, S. and Kutty, S.R.M. (2017) In-vessel co-composting of yard waste and food waste: an approach for sustainable waste management in Cameron Highlands, Malaysia. International Journal of Recycling of Organic Waste in Agriculture, 6 (2). pp. 149-157. ISSN 21953228

Malkawi, A.B. and Nuruddin, M.F. and Fauzi, A. and Al-Mattarneh, H. and Mohammed, B.S. (2017) Effect of plasticizers and water on properties of HCFA geopolymers. Key Engineering Materials, 733 KE. pp. 76-79. ISSN 10139826

Mandal, P.C. and Morshed, S.M. (2017) Localization of fugitive methane emission from natural gas distribution network of Titas Gas. Polish Journal of Chemical Technology, 19 (1). pp. 127-131. ISSN 15098117

Mandal, P.C. and Nasir, H.S.M. (2017) Total acid number reduction of naphthenic acid using subcritical methanol: A kinetic study. Iranian Journal of Chemistry and Chemical Engineering, 36 (5). pp. 143-147. ISSN 10219986

Maneth Wanniarachchi, W.A. and Gamage, R.P. and Perera, M.S.A. and Rathnaweera, T.D. and Gao, M. and Padmanabhan, E. (2017) Investigation of depth and injection pressure effects on breakdown pressure and fracture permeability of shale reservoirs: An experimental study. Applied Sciences (Switzerland), 7 (7). ISSN 20763417

Mannan, H.A. and Mohshim, D.F. and Mukhtar, H. and Murugesan, T. and Man, Z. and Bustam, M.A. (2017) Synthesis, characterization, and CO2 separation performance of polyether sulfone/EMIMTf2N ionic liquid-polymeric membranes (ILPMs). Journal of Industrial and Engineering Chemistry, 54. pp. 98-106. ISSN 1226086X

Mannan, H.A. and Mukhtar, H. and Murugesan, T. and Man, Z. and Bustam, M.A. and Shaharun, M.S. and Abu Bakar, M.Z. (2017) Prediction of CO2 gas permeability behavior of ionic liquid�polymer membranes (ILPM). Journal of Applied Polymer Science, 134 (17). ISSN 00218995

Mannan, S. and Nordin, S.M. and Rafik-Galea, S. and Ahmad Rizal, A.R. (2017) The ironies of new innovation and the sunset industry: Diffusion and adoption. Journal of Rural Studies, 55. pp. 316-322. ISSN 07430167

Mannar, N. and Bavoh, C.B. and Baharudin, A.H. and Lal, B. and Mellon, N.B. (2017) Thermophysical properties of aqueous lysine and its inhibition influence on methane and carbon dioxide hydrate phase boundary condition. Fluid Phase Equilibria, 454. pp. 57-63. ISSN 03783812

Manoharan, L.S. and Teh, H.M. and Lim, C.H. (2017) Wave transmission of submerged breakwaters consisting multiple pipes. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5807-5810. ISSN 18196608

Manoranjitham, M. and Ooi, L.K. and Savita, K.S. (2017) Touch sensation based computer application to facilitate the learning process of dyslexic children. Advanced Science Letters, 23 (11). pp. 11192-11196. ISSN 19366612

Mansor, R. and Othman, M. and Kasim, M.M. (2017) Fuzzy reasoning based time series forecasting using weighted subsethood model. Advanced Science Letters, 23 (9). pp. 9094-9097. ISSN 19366612

Maqsood, K. and Ali, A. and Shariff, A.B.M. and Ganguly, S. (2017) Process intensification using mixed sequential and integrated hybrid cryogenic distillation network for purification of high CO2 natural gas. Chemical Engineering Research and Design, 117. pp. 414-438. ISSN 02638762

Mardi, N.H. and Malek, M.A. and Liew, M.S. (2017) Tsunami simulation due to seaquake at Manila Trench and Sulu Trench. Natural Hazards, 85 (3). pp. 1723-1741. ISSN 0921030X

Marik Singh, S.K. and Zabiri, H. and Isa, F. and Shariff, A.M. (2017) Simulation of CO2 rich natural Gas pilot plant carbon dioxide absorption column at elevated pressure using equilibrium and rate based method. Communications in Computer and Information Science, 752. pp. 327-336. ISSN 18650929

Marimuthu, M. and Kolandaisamy, I. and Hassan, R. (2017) Government linked-companies: Impact of gearing and boardsize on firm performance. Journal of Advanced Research in Dynamical and Control Systems, 9 (Specia). pp. 679-685. ISSN 1943023X

Masrom, S. and Abidin, S.Z.Z. and Omar, N. and Rahman, A.S.A. and Rizman, Z.I. (2017) Dynamic parameterizations of particle swarm optimization and genetic algorithm for facility layout problem. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3195-3201. ISSN 18196608

Mathialagan, R. and Mansor, N. and Shamsuddin, M.R. and Uemura, Y. and Majeed, Z. (2017) Optimisation of Ultrasonic-Assisted Extraction (UAE) of Allicin from Garlic (Allium sativum L.). Chemical Engineering Transactions, 56. pp. 1747-1752. ISSN 22839216

Mavukkandy, M.O. and Bilad, M.R. and Kujawa, J. and Al-Gharabli, S. and Arafat, H.A. (2017) On the effect of fumed silica particles on the structure, properties and application of PVDF membranes. Separation and Purification Technology, 187. pp. 365-373. ISSN 13835866

Mazher, M. and Abd Aziz, A. and Malik, A.S. and Ullah Amin, H. (2017) An EEG-Based Cognitive Load Assessment in Multimedia Learning Using Feature Extraction and Partial Directed Coherence. IEEE Access, 5. pp. 14819-14829. ISSN 21693536

Mazlan, M.A.A.A. and Khir, M.H.M. and Saad, N.M. and Dass, S.C. (2017) Wifi fingerprinting indoor positioning with multiple access points in a single base station using probabilistic method. International Journal of Applied Engineering Research, 12 (6). p. 1102. ISSN 09734562

McIntyre, D. and Naeem, W. and Ali, S.S.A. (2017) Concertina effect-based underwater structure inspection by autonomous vehicles in three dimensions. Indian Journal of Geo-Marine Sciences, 46 (12). pp. 2588-2600. ISSN 25826506

Mehat, N.M. and Shahrul, K. (2017) Investigation on wear behavior of bamboo filler reinforcement of injection moulded plastic gear. Key Engineering Materials, 737 KE. pp. 119-123. ISSN 10139826

Mehrpouya, M. and Emamian, S. (2017) Recent advantages in laser fabrication of micro-channel heat exchangers: Fortschritte in der Herstellung von Mikrokanal Wärmetauschern mittels Laserherstellung. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 205-209. ISSN 09335137

Memon, A.H. and Ibrahim, T.B. and Nallagoowden, P. (2017) Design development and modelling of linear permanent magnet generator topologies for wave energy conversion. International Journal of Applied Engineering Research, 12 (12). pp. 3329-3336. ISSN 09734562

Memon, M.A. and Sallaeh, R. and Baharom, M.N.R. and Md Nordin, S. and Ting, H. (2017) The relationship between training satisfaction, organisational citizenship behaviour, and turnover intention: A PLS-SEM approach. Journal of Organizational Effectiveness, 4 (3). pp. 267-290. ISSN 20516614

Memon, M.A. and Ting, H. and Ramayah, T. and Chuah, F. and Cheah, J.-H. (2017) A review of the methodological misconceptions and guidelines related to the application of structural equation modeling: A malaysian scenario. Journal of Applied Structural Equation Modeling, 1 (1). i-xiii. ISSN 25904221

Memon, M.K. and Elraies, K.A. and Al-Mossawy, M.I. (2017) Impact of new foam surfactant blend with water alternating gas injection on residual oil recovery. Journal of Petroleum Exploration and Production Technology, 7 (3). pp. 843-851. ISSN 21900558

Memon, M.K. and Shuker, M.T. and Elraies, K.A. (2017) Study of blended surfactants to generate stable foam in presence of crude oil for gas mobility control. Journal of Petroleum Exploration and Production Technology, 7 (1). pp. 77-85. ISSN 21900558

Mengal, A.N. and Karuppanan, S. and Ovinis, M. (2017) In�plane shear properties of basalt�carbon/epoxy hybrid composite laminates: In�plane Schereigenschaften von Basalt-Kohlenstoff/Epoxy-Hybrid-Verbundlaminaten. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 261-266. ISSN 09335137

Menier, D. and Mathew, M. and Pubellier, M. and Sapin, F. and Delcaillau, B. and Siddiqui, N. and Ramkumar, M. and Santosh, M. (2017) Landscape response to progressive tectonic and climatic forcing in NW Borneo: Implications for geological and geomorphic controls on flood hazard. Scientific Reports, 7 (1). ISSN 20452322

Meyghani, B. and Awang, M. and Emamian, S. (2017) A mathematical formulation for calculating temperature dependent friction coefficient values: Application in friction stir welding (FSW). Defect and Diffusion Forum, 379. pp. 73-82. ISSN 10120386

Meyghani, B. and Awang, M. and Emamian, S. and Khalid, N.M. (2017) Developing a finite element model for thermal analysis of friction stir welding by calculating temperature dependent friction coefficient. Lecture Notes in Mechanical Engineering. pp. 107-126. ISSN 21954356

Meyghani, B. and Awang, M.B. and Emamian, S.S. and Mohd Nor, M.K.B. and Pedapati, S.R. (2017) A comparison of different finite element methods in the thermal analysis of friction stir welding (FSW). Metals, 7 (10). ISSN 20754701

Mian, M.U. and Dennis, J.O. and Khir, M.H.M. and Ahmed, M.G.A. and Rabih, A.A.S. and Tang, T.B. (2017) Experimental analysis of out-of-plane Lorentz force actuated magnetic field sensor. IEICE Electronics Express, 14 (5). ISSN 13492543

Mirza, M.Z. and Isha, A.S.N. (2017) Context matters: A research agenda to move beyond conventional leadership-safety relationship. Safety Science, 98. pp. 167-173. ISSN 09257535

Mkayes, A.A. and Walter, N. and Saad, N.M. and Faye, I. and Cheong, S.C. and Lim, K.P. (2017) Enhancement of cell visibility and contrast for fluorescence microscope images by subjective and objective analysis of several visual aspects. Lecture Notes in Electrical Engineering, 398. pp. 321-331. ISSN 18761100

Mobin, M.A. and Masih, M. and Alhabshi, S.O. (2017) Religion of Islam and Microfinance: Does It Make Any Difference? Emerging Markets Finance and Trade, 53 (7). pp. 1547-1562. ISSN 1540496X

Mohamad, A.M. and Hamada, G.M. (2017) Determination techniques of Archie's parameters: A, m and n in heterogeneous reservoirs. Journal of Geophysics and Engineering, 14 (6). pp. 1358-1367. ISSN 17422132

Mohamad, M. and Liew, M.S. and Danyaro, K.U. and Lim, E.S. (2017) Implementation of attenuation equations for seismic hazard assessment in Malaysian water. Advanced Science Letters, 23 (2). pp. 1361-1365. ISSN 19366612

Mohamed, M. and Yusup, S. and Bustam, M.A. and Azmi, N. (2017) Effect of coal bottom ash & binder addition into CaO-based Sorbent on CO2capture performance. Chemical Engineering Transactions, 56. pp. 325-330. ISSN 22839216

Mohamed Yousuff, C. and B Hamid, N.H. and Kamal Basha, I.H. and Wei Ho, E.T. (2017) Output channel design for collecting closely-spaced particle streams from spiral inertial separation devices. AIP Advances, 7 (8). ISSN 21583226

Mohamed Zain, I.F. and Awang, A. and Laouiti, A. (2017) Hybrid MAC protocols in VANET: A survey. Advances in Intelligent Systems and Computing, 548. pp. 1-14. ISSN 21945357

Mohammad, M.F. and Rahman, N.A.A. and Hassan, R. and Kurniawan, R. (2017) Multi-Criteria Decision Making (MCDM) for bachelor of aircraft engineering technology (avionic) final year students in project management course: AHP method for career selection. Journal of Engineering and Applied Sciences, 12 (3). pp. 705-714. ISSN 1816949X

Mohammad Rozali, N.E. and Wan Alwi, S.R. and Ho, W.S. and Manan, Z.A. and Klemeš, J.J. and Mustapha, N.N. and Rosli, M.H. (2017) A new framework for cost-effective design of Hybrid Power Systems. Journal of Cleaner Production, 166. pp. 806-815. ISSN 09596526

Mohammad Shuhaili, F. and Sulaiman, S. and Mahamad, S. and Sarlan, A. (2017) Visual object interface signifier of museum application for large display. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10645 . pp. 582-591. ISSN 03029743

Mohammed, B.S. and Achara, B.E. and Nuruddin, M.F. and Yaw, M. and Zulkefli, M.Z. (2017) Properties of nano-silica-modified self-compacting engineered cementitious composites. Journal of Cleaner Production, 162. pp. 1225-1238. ISSN 09596526

Mohammed, B.S. and Adamu, M. and Shafiq, N. (2017) Establishing relationship between modulus of elasticity and strength of nano silica modified roller compacted rubbercrete. International Journal of GEOMATE, 13 (39). pp. 103-110. ISSN 21862982

Mohammed, B.S. and Adamu, M. and Shafiq, N. (2017) A review on the effect of crumb rubber on the properties of rubbercrete. International Journal of Civil Engineering and Technology, 8 (9). pp. 599-615. ISSN 09766308

Mohammed, B.S. and Syed, Z.I. and Khed, V. and Qasim, M.S. (2017) Evaluation of nano-silica modified ECC based on ultrasonic pulse velocity and rebound hammer. Open Civil Engineering Journal, 11. pp. 638-649. ISSN 18741495

Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusuf, S. (2017) Effects of Pretreatments of Napier Grass with Deionized Water, Sulfuric Acid and Sodium Hydroxide on Pyrolysis Oil Characteristics. Waste and Biomass Valorization, 8 (3). pp. 755-773. ISSN 18772641

Mohammed, I.Y. and Abakr, Y.A. and Yusup, S. and Alaba, P.A. and Morris, K.I. and Sani, Y.M. and Kazi, F.K. (2017) Upgrading of Napier grass pyrolytic oil using microporous and hierarchical mesoporous zeolites: Products distribution, composition and reaction pathways. Journal of Cleaner Production, 162. pp. 817-829. ISSN 09596526

Mohammed, I.Y. and Abakr, Y.A. and Yusup, S. and Kazi, F.K. (2017) Valorization of Napier grass via intermediate pyrolysis: Optimization using response surface methodology and pyrolysis products characterization. Journal of Cleaner Production, 142. pp. 1848-1866. ISSN 09596526

Mohammed, I.Y. and Lim, C.H. and Kazi, F.K. and Yusup, S. and Lam, H.L. and Abakr, Y.A. (2017) Co-pyrolysis of Rice Husk with Underutilized Biomass Species: A Sustainable Route for Production of Precursors for Fuels and Valuable Chemicals. Waste and Biomass Valorization, 8 (3). pp. 911-921. ISSN 18772641

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2017) Performance and combustion characteristics of a novel crank-rocker engine. Journal of Mechanical Science and Technology, 31 (7). pp. 3563-3571. ISSN 1738494X

Mohd Arif, N.N. and Harun, N. and Yunus, N.M. and Vo, D.-V.N. and Azizan, M.T. and Zainal Abidin, S. (2017) Reforming of glycerol for hydrogen production over Ni based catalysts: Effect of support type. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 39 (7). pp. 657-663. ISSN 15567036

Mohd Laziz, A. and Ku Shaari, K.Z. (2017) CFD simulation of two phase segmented flow in microchannel reactor using volume of fluid model for biodiesel production. Communications in Computer and Information Science, 751. pp. 336-344. ISSN 18650929

Mohd Yassin, A.Y. and Nethercot, D.A. (2017) Non-iterative moment capacities of complex composite beams using Fourier series. International Journal of Advanced Structural Engineering, 9 (1). pp. 37-49. ISSN 20083556

Mohd Zaid, H.F. and Chong, F.K. and Abdul Mutalib, M.I. (2017) Extractive deep desulfurization of diesel using choline chloride-glycerol eutectic-based ionic liquid as a green solvent. Fuel, 192. pp. 10-17. ISSN 00162361

Mohd-Noor, S.-N. and Wong, C.-Y. and Lim, J.-W. and Mah-Hussin, M.-I.-A. and Uemura, Y. and Lam, M.-K. and Ramli, A. and Bashir, M.J.K. and Tham, L. (2017) Optimization of self-fermented period of waste coconut endosperm destined to feed black soldier fly larvae in enhancing the lipid and protein yields. Renewable Energy, 111. pp. 646-654. ISSN 09601481

Mohd-Sahib, A.-A. and Lim, J.-W. and Lam, M.-K. and Uemura, Y. and Isa, M.H. and Ho, C.-D. and Kutty, S.R.M. and Wong, C.-Y. and Rosli, S.-S. (2017) Lipid for biodiesel production from attached growth Chlorella vulgaris biomass cultivating in fluidized bed bioreactor packed with polyurethane foam material. Bioresource Technology, 239. pp. 127-136. ISSN 09608524

Mohyaldinn, M.E. and Rammudo, L. and Ayoub, M. (2017) Experimental investigation of polyvinylpyrrolidone for application as a demulsifier for water-in-oil emulsion. Open Petroleum Engineering Journal, 10. pp. 263-275. ISSN 18748341

Mokri, N.A. and Oh, P.C. and Mukhtar, H. and Chew, T.L. (2017) Synthesis of high molecular weight polyimide consisting hexafluoroisopropylidene moiety for gas separation. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 3144-3151. ISSN 22894659

Momeni, M. and Ridha, S. and Hosseiniz, S.J. and Liu, X. and Atashnezhad, A. and Ghaheri, S. (2017) Optimum drill bit selection by using bit images and mathematical investigation. International Journal of Engineering, Transactions B: Applications, 30 (11). pp. 1807-1813. ISSN 1728144X

Mousa Ali, E. and Yahaya, N.Z. and Nallagownden, P. and Zakariya, M.A. (2017) A novel rectifying circuit for microwave power harvesting system. International Journal of RF and Microwave Computer-Aided Engineering, 27 (4). ISSN 10964290

Muhammad, G. and Alsulaiman, M. and Ali, Z. and Mesallam, T.A. and Farahat, M. and Malki, K.H. and Al-nasheri, A. and Bencherif, M.A. (2017) Voice pathology detection using interlaced derivative pattern on glottal source excitation. Biomedical Signal Processing and Control, 31. pp. 156-164. ISSN 17468094

Muhammad, N. and Gonfa, G. and Rahim, A. and Ahmad, P. and Iqbal, F. and Sharif, F. and Khan, A.S. and Khan, F.U. and Khan, Z.U.H. and Rehman, F. and Rehman, I.U. (2017) Investigation of ionic liquids as a pretreatment solvent for extraction of collagen biopolymer from waste fish scales using COSMO-RS and experiment. Journal of Molecular Liquids, 232. pp. 258-264. ISSN 01677322

Muhd, F.N. and Amir, F. and Mohamed, M.A.W. and Shafiq, N. and Malkawi, A.B. (2017) Utilization of eafd in concrete composite. Materials Science Forum, 894 MS. pp. 72-75. ISSN 02555476

Mumtaz, W. and Vuong, P.L. and Xia, L. and Malik, A.S. and Rashid, R.B.A. (2017) An EEG-based machine learning method to screen alcohol use disorder. Cognitive Neurodynamics, 11 (2). pp. 161-171. ISSN 18714080

Mumtaz, W. and Xia, L. and Ali, S.S.A. and Yasin, M.A.M. and Hussain, M. and Malik, A.S. (2017) Electroencephalogram (EEG)-based computer-aided technique to diagnose major depressive disorder (MDD). Biomedical Signal Processing and Control, 31. pp. 108-115. ISSN 17468094

Mumtaz, W. and Xia, L. and Yasin, M.A.M. and Ali, S.S.A. and Malik, A.S. (2017) A wavelet-based technique to predict treatment outcome for Major Depressive Disorder. PLoS ONE, 12 (2). ISSN 19326203

Muniandy, M. and Sulaiman, S. (2017) The role of multimedia design elements in computer accessibility for visually impaired: A complete review. Journal of Theoretical and Applied Information Technology, 95 (20). pp. 5379-5398. ISSN 19928645

Muniandy, M. and Sulaiman, S. and Savita, K.S. (2017) Evaluating accessibility criteria and alternatives of computer applications for the blind using analytical hierarchy process. Advanced Science Letters, 23 (11). pp. 10991-10995. ISSN 19366612

Musa, A.A. and Ben-Awuah, J. and Saad, R. and Andriamihaja, S. (2017) Combined use of 2D electrical resistivity and seismic refraction in hydrogeophysical exploration. Petroleum and Coal, 59 (1). 01-09. ISSN 13377027

Musa, N. and Mohammed, B.S. and Liew, M.S. and Singh, P. (2017) Flexural strength of rc beams with multiple layers of cfrp sheet. International Journal of Civil Engineering and Technology, 8 (12). pp. 134-143. ISSN 09766308

Musah, A.A. and Ghazali, Z. and Isha, S.N.A. (2017) Sources of conflict and conflict management styles in temporary work environment: A case of plant turnaround maintenance workers. International Journal of Project Organisation and Management, 9 (2). pp. 171-193. ISSN 17402891

Musthafa, N.H.B. and Hooi, Y.K. and Hassan, M.F. and Shariff, A.M. and Khalid, K.S. (2017) Automatic statistical inventory reconciliation for leak detection of petrochemical storage. Advanced Science Letters, 23 (11). pp. 10777-10781. ISSN 19366612

Muthuvalu, M.S. and Sulaiman, J. (2017) Numerical performance of Half-Sweep Geometric Mean (HSGM) iterative method for solving third order Newton�Cotes quadrature system. Lobachevskii Journal of Mathematics, 38 (1). pp. 73-81. ISSN 19950802

Muzammel, M. and Yusoff, M.Z. and Meriaudeau, F. (2017) Rear-end vision-based collision detection system for motorcyclists. Journal of Electronic Imaging, 26 (3). ISSN 10179909

N

Na, K.L. and Lee, H.E. and Liew, M.S. and Wan Abdullah Zawawi, N.A. (2017) An expert knowledge based decommissioning alternative selection system for fixed oil and gas assets in the South China Sea. Ocean Engineering, 130. pp. 645-658. ISSN 00298018

Nadeem, H. and Habib, N.Z. and Aun, N.C. and Zoorob, S.E. and Mustaffa, Z. and Mesney, R. and Suubitaa, S. (2017) Used engine oil as alternate binder for buildings - A comparative study. Proceedings of Institution of Civil Engineers: Waste and Resource Management, 170 (2). pp. 57-65. ISSN 17476526

Nadeem, H. and Habib, N.Z. and Aun, N.C. and Zoorob, S.E. and Mustaffa, Z. and Nadeem, S. (2017) Production of environmentally friendly roofing tiles using palm oil as a binder. Green Materials, 5 (3). pp. 135-143. ISSN 20491220

Nadeem, H. and Habib, N.Z. and Ng, C.A. and Zoorob, S.E. and Mustaffa, Z. and Chee, S.Y. and Younas, M. (2017) Utilization of catalyzed waste vegetable oil as a binder for the production of environmentally friendly roofing tiles. Journal of Cleaner Production, 145. pp. 250-261. ISSN 09596526

Naeem, R. and Yahya, R. and Mansoor, M.A. and Teridi, M.A.M. and Sookhakian, M. and Mumtaz, A. and Mazhar, M. (2017) Photoelectrochemical water splitting over mesoporous CuPbI3 films prepared by electrophoretic technique. Monatshefte fur Chemie, 148 (6). pp. 981-989. ISSN 00269247

Naffouti, S.E. and Fougerolle, Y. and Sakly, A. and Mériaudeau, F. (2017) An advanced global point signature for 3D shape recognition and retrieval. Signal Processing: Image Communication, 58. pp. 228-239. ISSN 09235965

Nallagownden, P. and Hamid Abdalla, E.A. and Mohd Nor, N. and Romlie, M.F. (2017) Optimal chiller loading using improved particle swarm optimization. Lecture Notes in Electrical Engineering, 398. pp. 103-113. ISSN 18761100

Nallagownden, P. and Mahesh, K. and Elamvazuthi, I. (2017) A combined-model for uncertain load and optimal configuration of distributed generation in power distribution system. International Journal of Simulation: Systems, Science and Technology, 17 (41). 11.1-11.7. ISSN 14738031

Namazi-saleh, F. and Kurian, V.J. and Mustaffa, Z. and Tahan, M. and Kim, D. (2017) Effect of bed vicinity on vortex shedding and force coefficients of fluid flow on an offshore pipeline. Journal of Marine Science and Application, 16 (1). pp. 81-86. ISSN 16719433

Nandiyanto, A.B.D. and Putra, Z.A. and Andika, R. and Bilad, M.R. and Kurniawan, T. and Zulhijah, R. and Hamidah, I. (2017) Porous activated carbon particles from rice straw waste and their adsorption properties. Journal of Engineering Science and Technology, 12 (Specia). pp. 1-11. ISSN 18234690

Narahari, M. and Soorapuraju, S.K.R. and Pendyala, R. and Pop, I. (2017) Transient two-dimensional natural convection flow of a nanofluid past an isothermal vertical plate using Buongiorno's model. International Journal of Numerical Methods for Heat and Fluid Flow, 27 (1). pp. 23-47. ISSN 09615539

Narahari, M. and Suresh Kumar Raju, S. and Pendyala, R. (2017) Unsteady natural convection flow of multi-phase nanofluid past a vertical plate with constant heat flux. Chemical Engineering Science, 167. pp. 229-241. ISSN 00092509

Nasif, M.S. and Ahmed, M.A.M. and Hasnain, S.A. and Kamaruzaman, A. and Ismail, F.B. (2017) Numerical investigation of fire spread, evacuation and hazard assessment in an offshore petroleum platform by using cfd simulation. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2566-2569. ISSN 18196608

Nasr, N.H. and Raza, A. and Mahmood, S.M. and Hematpour, E. (2017) Comparison of permeability correlations for different rock fabric. Journal of Engineering and Applied Sciences, 12 (7). pp. 1853-1858. ISSN 1816949X

Nasrullah, A. and Bhat, A.H. and Isa, M.H. and Danish, M. and Naeem, A. and Muhammad, N. and Khan, T. (2017) Efficient removal of methylene blue dye using mangosteen peel waste: Kinetics, isotherms and artificial neural network (ANN) modeling. Desalination and Water Treatment, 86. pp. 191-202. ISSN 19443994

Nayeem, M.M. and Alikhan, L.U.R.L. (2017) Agro-development in Musali by using Muzara'ah supply chain model. International Journal of Economic Research, 14 (15). pp. 127-133. ISSN 09729380

Naz, M.Y. and Ismail, N.I. and Sulaiman, S.A. and Shukrullah, S. (2017) Characterization of erosion of gas pipelines by dry sand. Instrumentation Science and Technology, 45 (1). pp. 62-72. ISSN 10739149

Naz, M.Y. and Sulaiman, S.A. (2017) Attributes of natural and synthetic materials pertaining to slow-release urea coating industry. Reviews in Chemical Engineering, 33 (3). pp. 293-308. ISSN 01678299

Naz, M.Y. and Sulaiman, S.A. and Bou-Rabee, M.A. (2017) Particle tracking velocimetry investigations on density dependent velocity vector profiles of a swirling fluidized bed. Drying Technology, 35 (2). pp. 193-202. ISSN 07373937

Naz, M.Y. and Sulaiman, S.A. and Shukrullah, S. and Ghaffar, A. and Ibrahim, K.A. and AbdEl-Salam, N.M. (2017) Development of erosion-corrosion mechanisms for the study of steel surface behavior in a sand slurry. Measurement: Journal of the International Measurement Confederation, 106. pp. 203-210. ISSN 02632241

Naz, M.Y. and Sulaiman, S.A. and Shukrullah, S. and Ghaffar, A. and Khan, Y. and Ahmad, I. (2017) PIV investigations on particle velocity distribution in uniform swirling regime of fluidization. Granular Matter, 19 (2). ISSN 14345021

Nazim, R. and Yaacob, R.A.I.R. (2017) Criteria for supplier selection: An application of AHP-SCOR integrated model (ASIM). International Journal of Supply Chain Management, 6 (3). pp. 284-290. ISSN 20513771

Negash, B.M. and Tufa, L.D. and Ramasamy, M. and Awang, M.B. (2017) System Identification Based Proxy Model of a Reservoir under Water Injection. Modelling and Simulation in Engineering, 2017. ISSN 16875591

Negash, B.M. and Vel, A. and Elraies, K.A. (2017) Artificial neural network and inverse solution method for assisted history matching of a reservoir model. International Journal of Applied Engineering Research, 12 (11). pp. 2952-2962. ISSN 09734562

Ng, H.C. and Khe, C.S. and Aziz, A. and Merican, Z.M.A. and Sokkalingam, R. and Chew, T.L. and Lai, C.W. (2017) Biosynthesis of silver nanoparticles using unriped Carica papaya fruit extract with different PH conditions. International Journal of Nanoparticles, 9 (2). pp. 55-70. ISSN 17532507

Ng, W.C.K. and Hwang, O.J. (2017) Effect of finite element formulation type on blast wall analysis subjected to explosive loading. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5778-5783. ISSN 18196608

Ng, Z.G. and Lim, J.W. and Isa, M.H. and Pasupuleti, V.R. and Yunus, N.M. and Lee, K.C. (2017) Adsorptive removal of hexavalent chromium using sawdust: Enhancement of biosorption and bioreduction. Separation Science and Technology (Philadelphia), 52 (10). pp. 1707-1716. ISSN 01496395

Nizamani, A.A. and Ismail, A.R. and Junin, R. and Dayo, A.Q. and Tunio, A.H. and Ibupoto, Z.H. and Sidek, M.A.M. (2017) Synthesis of titania-bentonite nanocomposite and its applications in water-based drilling fluids. Chemical Engineering Transactions, 56. pp. 949-954. ISSN 22839216

Noor, Z.H. and Humayun, N. and Ng Choon, A. and Salah, E.Z. and Zahiraniza, M. (2017) Sustainable and eco-friendly vege roofing tiles: An innovative bio-composite. Materials Science Forum, 882. pp. 71-76. ISSN 02555476

Nor, N.M. and Ali, A. and Ibrahim, T. and Romlie, M.F. (2017) Battery Storage for the Utility-Scale Distributed Photovoltaic Generations. IEEE Access, 6. pp. 1137-1154. ISSN 21693536

Nor, N.M. and Zemri, N.S. and Daud, S.A. and Ibrahim, T. and Daud, H. (2017) Development of an automated three-phase distribution box system. Indonesian Journal of Electrical Engineering and Computer Science, 6 (2). pp. 233-240. ISSN 25024752

Nordin, A. and Majid, M.A.A. (2017) Parametric study on effect of pinch and approach points on heat recovery steam generator performance at a district cooling system. Journal of Mechanical Engineering and Sciences, 11 (2). pp. 2626-2636. ISSN 22894659

Nordin, K.H. and Ovinis, M. and Javaid, M.Y. (2017) Study on the effect of wing geometry on underwater glider hydrodynamics. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3101-3104. ISSN 18196608

Nordin, N. and Abdul Karim, Z.A. and Othman, S. and Raghavan, V.R. and Adzila, S. and Md Seri, S. and Md Taib, I. and Ramli, Y. (2017) Assessment of turbulence model performance adopted near wall treatment for a sharp 90° 3-D turning diffuser. Communications in Computer and Information Science, 751. pp. 259-273. ISSN 18650929

Nordin, N.A.H.M. and Ismail, A.F. and Yahya, N. (2017) Zeolitic imidazole framework 8 decorated graphene oxide (ZIF-8/GO) mixed matrix membrane (MMM) for CO2/CH4 separation. Jurnal Teknologi, 79 (1-2). pp. 59-63. ISSN 01279696

Norlaili, A. and Faiz, A. and Hazwan, A.H. and Fatima, G. and Megat, P.S.M.Y. and Aziz, H. and Rafiq, A. (2017) Synergistic effects of titanium dioxide and zinc borate on thermal degradation and water resistance of epoxy based intumescent fire retardant coatings. Key Engineering Materials, 740 KE. pp. 41-47. ISSN 10139826

Nugroho, H. and Fei-Lu, S. and Firmansyah (2017) Developing renewable energy in developing countries: A lesson from Indonesia. Energy Sources, Part B: Economics, Planning and Policy, 12 (4). pp. 318-325. ISSN 15567249

Nuhu Shuaibu, A. and Faye, I. and Salih Ali, Y. and Kamel, N. and Saad, M.N. and Malik, A.S. (2017) Sparse Representation for Crowd Attributes Recognition. IEEE Access, 5. pp. 10422-10433. ISSN 21693536

Nuruddin, M.F. and Puad, N.H.A. and Zaidi, N.H.A. (2017) Effectiveness of aerogel roofing system on temperature reduction in Malaysian residential buildings. Journal of Engineering and Applied Sciences, 12 (16). pp. 4057-4062. ISSN 1816949X

O

Ofei, T.N. and Bavoh, C.B. and Rashidi, A.B. (2017) Insight into ionic liquid as potential drilling mud additive for high temperature wells. Journal of Molecular Liquids, 242. pp. 931-939. ISSN 01677322

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Applications of Taguchi method for optimization of dye solar cell design. Sains Malaysiana, 46 (3). pp. 503-508. ISSN 01266039

Omar, M.Y. and Rambli, D.R.A. and Shiratuddin, M.F. (2017) Designing persuasive stroke rehabilitation game: An analysis of persuasion context. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10645 . pp. 559-569. ISSN 03029743

Osman, A.B. and Mark, O.V. and Fakhruldin, M.H. and Faye, I. (2017) Wavelet-based optical velocimetry: An alternative technique for deepwater oil spill flow rate estimation. Indian Journal of Geo-Marine Sciences, 46 (12). pp. 2579-2587. ISSN 25826506

Osman, A.B. and Ovinis, M. and Hashim, F.M. and Mohammed, K. and Osei, H. (2017) Time delay estimation using continuous wavelet transform coefficients. Advanced Science Letters, 23 (2). pp. 1299-1303. ISSN 19366612

Othman, A.R. and Jadee, K.J. and Ismadi, M.-Z. (2017) Mitigating stress concentration through defense hole system for improvement in bearing strength of composite bolted joint, Part 1: Numerical analysis. Journal of Composite Materials, 51 (26). pp. 3685-3699. ISSN 00219983

Owolabi, A.L. and Al-Kayiem, H.H. and Baheta, A.T. (2017) Performance investigation on a thermal energy storage integrated solar collector system using nanofluid. International Journal of Energy Research, 41 (5). pp. 650-657. ISSN 0363907X

Owolabi, A.L. and Megat-Yusoff, P.S.M. and Said, M.A.M. (2017) Investigation on microstructure and mechanical properties on varying surface region of a serviceexposed IN738 turbine blade. International Journal of Microstructure and Materials Properties, 12 (1-2). pp. 38-54. ISSN 17418410

P

Pal, A. and Shahrom, M.S.R. and Moniruzzaman, M. and Wilfred, C.D. and Mitra, S. and Thu, K. and Saha, B.B. (2017) Ionic liquid as a new binder for activated carbon based consolidated composite adsorbents. Chemical Engineering Journal, 326. pp. 980-986. ISSN 13858947

Pampouchidou, A. and Pediaditis, M. and Maridaki, A. and Awais, M. and Vazakopoulou, C.-M. and Sfakianakis, S. and Tsiknakis, M. and Simos, P. and Marias, K. and Yang, F. and Meriaudeau, F. (2017) Quantitative comparison of motion history image variants for video-based depression assessment. Eurasip Journal on Image and Video Processing, 2017 (1). ISSN 16875176

Pao, W. and Saieed, A. and Hashim, F.M. and Norpiah, R.B.M. (2017) Numerical simulation of two�phase separation in a small diameter ratio T-junction: Numerische Simulation der Zweiphasentrennung in einem T-Knoten mit kleinem Durchmesser. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 255-260. ISSN 09335137

Pao, W. and Sam, B. and Nasif, M.S. and Norpiah, R.B.M. (2017) Numerical validation of two-phase slug flow and its liquid holdup correlation in horizontal pipeline. Key Engineering Materials, 740 KE. pp. 173-182. ISSN 10139826

Pasha, M. and Zaini, D. and Mohd Shariff, A. (2017) Inherently safer design for heat exchanger network. Journal of Loss Prevention in the Process Industries, 48. pp. 55-70. ISSN 09504230

Patel, A. and Alhussian, H. and Pedersen, J.M. and Bounabat, B. and Júnior, J.C. and Katsikas, S. (2017) A nifty collaborative intrusion detection and prevention architecture for Smart Grid ecosystems. Computers and Security, 64. pp. 92-109. ISSN 01674048

Patrick, D.O. and Yusup, S. and Osman, N.B. and Zabiri, H. and Shahbaz, M. (2017) Performance of water-leached coal bottom ash as catalyst in Thermogravimetric Analyser (TGA) biomass gasification. Chemical Engineering Transactions, 61. pp. 1681-1686. ISSN 22839216

Pedapati, S.R. and Sidiq, A.B. and Awang, M. and Hashim, F.M. and Jebaraj, S. (2017) Effect of bevel angles on tensile strength of SS304 steel weld joints. Lecture Notes in Mechanical Engineering. pp. 95-106. ISSN 21954356

Pierre, D.M. and Zakaria, N. (2017) Stochastic partially optimized cyclic shift crossover for multi-objective genetic algorithms for the vehicle routing problem with time-windows. Applied Soft Computing Journal, 52. pp. 863-876. ISSN 15684946

Pirzada, N. and Nayan, M.Y. and Subhan, F. and Abro, A. and Hassan, M.F. and Sakidin, H. (2017) Location Fingerprinting Technique for WLAN Device-Free Indoor Localization System. Wireless Personal Communications, 95 (2). pp. 445-455. ISSN 09296212

Prakasan, A. and Ovinis, M. and Javaid, M.Y. (2017) A numerical investigation of the drag forces on a fleet of underwater gliders. Advanced Science Letters, 23 (2). pp. 1272-1276. ISSN 19366612

Pratama, E. and Ismail, M.S. and Ridha, S. (2017) Screening criteria of optimum carbon dioxide injection for enhanced coalbed methane recovery and prediction of carbon dioxide storage capacity: A case study in south sumatera basin, Indonesia. Chemical Engineering Transactions, 56. pp. 997-1002. ISSN 22839216

Pratama, E. and Ismail, M.S. and Ridha, S. and Buntoro, A. (2017) An alternative approach for dynamic modeling in a complexly structured and heterogeneous carbonate gas reservoir: a field case study. Arabian Journal of Geosciences, 10 (16). ISSN 18667511

Pratama, E. and Suhaili Ismail, M. and Ridha, S. (2017) An integrated workflow to characterize and evaluate low resistivity pay and its phenomenon in a sandstone reservoir. Journal of Geophysics and Engineering, 14 (3). pp. 513-519. ISSN 17422132

Prathama, Y.B.H. and Shapiai, M.I. and Aris, S.A.M. and Ibrahim, Z. and Jaafar, J. and Fauzi, H. (2017) Common spatial pattern with feature scaling (FSc-CSP) for motor imagery classification. Communications in Computer and Information Science, 751. pp. 591-604. ISSN 18650929

Putra, Z.A. (2017) Improving heat exchanger network design of a revamped chemical plant. Indonesian Journal of Science and Technology, 2 (1). pp. 87-96. ISSN 25281410

Q

Qadir, D. and Mukhtar, H. and Keong, L.K. (2017) Mixed Matrix Membranes for Water Purification Applications. Separation and Purification Reviews, 46 (1). pp. 62-80. ISSN 15422119

Qadir, D. and Mukhtar, H. and Keong, L.K. (2017) Monitoring and physico-chemical assessment of ex-mining pools in Perak, Malaysia. Malaysian Journal of Science, 36 (1). pp. 32-46. ISSN 13943065

Qadir, D. and Mukhtar, H. and Keong, L.K. (2017) Retention of sulfate and chloride ions in commercially available tubular membranes. Membrane Water Treatment, 8 (4). pp. 369-380. ISSN 20058624

Qadir, D. and Mukhtar, H.B. and Keong, L.K. (2017) Rejection of divalent ions in commercial tubular membranes: Effect of feed concentration and anion type. Sustainable Environment Research, 27 (2). pp. 103-106. ISSN 24682039

Qayyum, A. and Malik, A.S. and Saad, N.M. and Iqbal, M. and Faris Abdullah, M. and Rasheed, W. and Rashid Abdullah, T.A. and Bin Jafaar, M.Y. (2017) Scene classification for aerial images based on CNN using sparse coding technique. International Journal of Remote Sensing, 38 (8-10). pp. 2662-2685. ISSN 01431161

Qayyum, A. and Malik, A.S. and Saad, N.M. and bin Abdullah, M.F. and Iqbal, M. and Rasheed, W. and Bin Ab Abdullah, A.R. and Hj Jaafar, M.Y. (2017) Measuring height of high-voltage transmission poles using unmanned aerial vehicle (UAV) imagery. Imaging Science Journal, 65 (3). pp. 137-150. ISSN 13682199

Qayyum, J.A. and Altaf, K. and Abdul Rani, A.M. and Ahmad, F. and Jahanzaib, M. (2017) Performance of 3D printed polymer mold for metal injection molding process. ARPN Journal of Engineering and Applied Sciences, 12 (22). pp. 6430-6434. ISSN 18196608

Qazi, E.-H. and Hussain, M. and Aboalsamh, H. and Malik, A.S. and Ullahamin, H. and Bamatraf, S. (2017) Single trial EEG patterns for the prediction of individual differences in fluid intelligence. Frontiers in Human Neuroscience, 10. ISSN 16625161

Quraish, K.S. and Bustam, M.A. and Krishnan, S. and Aminuddin, N.F. and Azeezah, N. and Ghani, N.A. and Uemura, Y. and Lévêque, J.M. (2017) Ionic liquids toxicity on fresh water microalgae, Scenedesmus quadricauda, Chlorella vulgaris & Botryococcus braunii; selection criterion for use in a two-phase partitioning bioreactor (TPPBR). Chemosphere, 184. pp. 642-651. ISSN 00456535

Quraishi, K.S. and Bustam, M.A. and Krishnan, S. and Khan, M.I. and Wilfred, C.D. and Lévêque, J.-M. (2017) Thermokinetics of alkyl methylpyrrolidinium NTf2 ionic liquids: Effect of alkyl chain on thermal stability. Journal of Thermal Analysis and Calorimetry, 129 (1). pp. 261-270. ISSN 13886150

Qureshi, S. and Yahya, N. and Kait, C.F. and Alqasem, B. and ur Rehman, Z. and Irfan, M. (2017) Enhanced catalytic activity of α-Fe2O3 with the adsorption of gases for ammonia synthesis. Materials Science Forum, 880. pp. 15-18. ISSN 02555476

R

Rahmah, A.U. and Harimurti, S. and Murugesan, T. (2017) Experimental investigation on the effect of wastewater matrix on oxytetracycline mineralization using UV/H2O2 system. International Journal of Environmental Science and Technology, 14 (6). pp. 1225-1233. ISSN 17351472

Rahman, N.A. and Yusup, S. (2017) Gas condensate conversion into high octane gasoline. Journal of Engineering and Applied Sciences, 12 (Specia). pp. 5624-5629. ISSN 1816949X

Rahman, N.A.A. and Mohammad, M.F. and Rahim, S.A. and Hassan, R. and Ahmad, M.F. and Kadir, S.A. (2017) Shipper's perceptions of aviation Logistics Service Quality (LSQ) of air freight provider. Journal of Engineering and Applied Sciences, 12 (3). pp. 699-704. ISSN 1816949X

Rahman, S.A. and Taghizadeh, S.K. and Ramayah, T. and Alam, M.M.D. (2017) Technology acceptance among micro-entrepreneurs in marginalized social strata: The case of social innovation in Bangladesh. Technological Forecasting and Social Change, 118. pp. 236-245. ISSN 00401625

Raj, J.J. and Wilfred, C.D. and Shah, S.N. and Pranesh, M. and Abdul Mutalib, M.I. and Lethesh, K.C. (2017) Physicochemical and thermodynamic properties of imidazolium ionic liquids with nitrile and ether dual functional groups. Journal of Molecular Liquids, 225. pp. 281-289. ISSN 01677322

Rajabi, M.S. and Moniruzzaman, M. and Mahmood, H. and Sivapragasam, M. and Bustam, M.A. (2017) Extraction of β-carotene from organic phase using ammonium based ionic liquids. Journal of Molecular Liquids, 227. pp. 15-20. ISSN 01677322

Ramasamy, M. and Dhanapal, D. and Murugesan, P. (2017) Effects of FDI spillover on regional productivity: Evidence from panel data analysis using stochastic frontier analysis. International Journal of Emerging Markets, 12 (3). pp. 427-446. ISSN 17468809

Rameshkumar, K. and Indragandhi, V. and Palanisamy, K. and Kannan, R. (2017) A novel current control technique for photo voltaic integrated single phase shunt active power filter. International Journal of Renewable Energy Research, 7 (4). pp. 1710-1722. ISSN 13090127

Ramkumar, M. and Menier, D. and Mathew, M. and Santosh, M. and Siddiqui, N.A. (2017) Early Cenozoic rapid flight enigma of the Indian subcontinent resolved: Roles of topographic top loading and subcrustal erosion. Geoscience Frontiers, 8 (1). pp. 15-23. ISSN 16749871

Ramli, A. (2017) Development of Mo/γ-Al2O3-CeO2 catalyst with high thermal stability by modified impregnation method. Materials Science Forum, 888 MS. pp. 491-495. ISSN 02555476

Ramli, A.A. and Kasim, S. and Fudzee, Mohd.F.Md. and Mohd Nawi, N. and Mahdin, H. and Watada, J. (2017) A revisited convex hull-based fuzzy linear regression model for dynamic fuzzy healthcare data. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-7). pp. 49-57. ISSN 21801843

Ramli, N.M. and Hussain, M.A. and Jan, B.M. and Abdullah, B. (2017) Online composition prediction of a debutanizer column using artificial neural network. Iranian Journal of Chemistry and Chemical Engineering, 36 (2). pp. 153-174. ISSN 10219986

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2017) Stability evaluation of three-layered journal bearing with slip/partial slip. Industrial Lubrication and Tribology, 69 (3). pp. 334-341. ISSN 00368792

Rao, T.V.V.L.N. and Rani, A.M.A. and Sufian, S. and Mohamed, N.M. (2017) Thin Film Hydrodynamic Bearing Analysis Using Nanoparticle Additive Lubricants. Topics in Mining, Metallurgy and Materials Engineering. pp. 149-173. ISSN 23643293

Rasheed, W. and Neoh, Y.Y. and Bin Hamid, N.H. and Reza, F. and Idris, Z. and Tang, T.B. (2017) Early visual analysis tool using magnetoencephalography for treatment and recovery of neuronal dysfunction. Computers in Biology and Medicine, 89. pp. 573-583. ISSN 00104825

Rashid, A.S.A. and Black, J.A. and Kueh, A.B.H. and Mohamad, H. and Noor, N.M. (2017) Bearing capacity charts of soft soil reinforced by deep mixing. Proceedings of the Institution of Civil Engineers: Ground Improvement, 170 (1). pp. 12-25. ISSN 17550750

Rashid, A.S.A. and Shirazi, M.G. and Mohamad, H. and Sahdi, F. (2017) Bearing capacity of sandy soil treated by Kenaf fibre geotextile. Environmental Earth Sciences, 76 (12). ISSN 18666280

Rashid, T. and Kait, C.F. and Murugesan, T. (2017) Effect of alkyl chain length on the thermophysical properties of pyridinium carboxylates. Chinese Journal of Chemical Engineering, 25 (9). pp. 1266-1272. ISSN 10049541

Rashidi, N.A. and Yusup, S. (2017) Potential of palm kernel shell as activated carbon precursors through single stage activation technique for carbon dioxide adsorption. Journal of Cleaner Production, 168. pp. 474-486. ISSN 09596526

Rashidi, N.A. and Yusup, S. (2017) A review on recent technological advancement in the activated carbon production from oil palm wastes. Chemical Engineering Journal, 314. pp. 277-290. ISSN 13858947

Rasool, F. and Drieberg, M. and Badruddin, N. and Mahinder Singh, B.S. (2017) PV panel modeling with improved parameter extraction technique. Solar Energy, 153. pp. 519-530. ISSN 0038092X

Rathinam, A. and Karthikeyan, T. and Ramani, K. (2017) Electric vehicle by using modified topology of multilevel inverter. International Journal of Vehicle Structures and Systems, 9 (1). pp. 47-52. ISSN 09753060

Raza, M.Q. and Nadarajah, M. and Hung, D.Q. and Baharudin, Z. (2017) An intelligent hybrid short-term load forecasting model for smart power grids. Sustainable Cities and Society, 31. pp. 264-275. ISSN 22106707

Raza, M.R. and Ahmad, F. and Muhamad, N. and Sulong, A.B. and Omar, M.A. and Akhtar, M.N. and Aslam, M. and Sherazi, I. (2017) Effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 L - Stainless steel. Sains Malaysiana, 46 (2). pp. 285-293. ISSN 01266039

Redzuan, M. and Saw, C.L. and Lew, W.C. and Choong, C.G. and Salvinder, S. and Al-Kayiem, H.H. and Lukmon, A. (2017) Numerical simulation of pcm intergrated solar collector storage water heater. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3363-3367. ISSN 18196608

Rehman, M. and Baharudin, Z. and Nallagownden, P. and Islam, B. (2017) Modelling and efficiency-analysis of wireless power transfer using magnetic resonance coupling. Indonesian Journal of Electrical Engineering and Computer Science, 6 (3). pp. 563-571. ISSN 25024752

Ridha, S. and Lubis, L.A. and Setiawan, R.A. and Razif Mohar, J.M.B. (2017) Investigation on mixed oil-cement for wellbore integrity using acoustic velocity. Key Engineering Materials, 740 KE. pp. 190-194. ISSN 10139826

Ridha, S. and Pratama, E. and Ismail, Mohd.S. (2017) Performance assessment of CO2 sequestration in a horizontal well for enhanced coalbed methane recovery in deep unmineable coal seams. Chemical Engineering Transactions, 56. pp. 589-594. ISSN 22839216

Rojek, T. and Gubler, L. and Nasef, M.M. and Abouzari-Lotf, E. (2017) Polyvinylamine-Containing Adsorbent by Radiation-Induced Grafting of N-Vinylformamide onto Ultrahigh Molecular Weight Polyethylene Films and Hydrolysis for CO2 Capture. Industrial and Engineering Chemistry Research, 56 (20). pp. 5925-5934. ISSN 08885885

Roslan, N.S. and Izhar, L.I. and Faye, I. and Saad, M.N.M. and Sivapalan, S. and Rahman, M.A. (2017) Review of EEG and ERP studies of extraversion personality for baseline and cognitive tasks. Personality and Individual Differences, 119. pp. 323-332. ISSN 01918869

Rouhi, J. and Kakooei, S. and Ismail, M.C. and Karimzadeh, R. and Mahmood, M.R. (2017) Development of iridium oxide sensor for surface pH measurement of a corroding metal under deposit. International Journal of Electrochemical Science, 12 (11). pp. 9933-9943. ISSN 14523981

Rozali, N.E.M. and Alwi, S.R.W. and Ho, W.S. and Manan, Z.A. and Klemeš, J.J. (2017) PoPA - Sharps: A new framework for cost-effective design of hybrid power systems. Chemical Engineering Transactions, 56. pp. 559-564. ISSN 22839216

Rozali, N.E.M. and Zaki, S.A.A.S.M. and Ho, W.S. and Liu, W.H. and Alwi, S.R.W. and Manan, Z.A. and Klemeš, J.J. (2017) Study of the effects of peak/off-peak load shifting on hybrid power system storage using Power Pinch Analysis. Chemical Engineering Transactions, 61. pp. 1519-1524. ISSN 22839216

S

Sabir, A.A. and Isha, A.S.N.B. (2017) Health care issues: A risk for fatal crashes amongst heavy vehicle drivers in oil and gas industry. Journal of Medical Imaging and Health Informatics, 7 (3). pp. 729-732. ISSN 21567018

Sadig, H. and Sulaiman, S.A. and Said, M.A. (2017) Effect of producer gas staged combustion on the performance and emissions of a single shaft micro-gas turbine running in a dual fuel mode. Journal of the Energy Institute, 90 (1). pp. 132-144. ISSN 17439671

Saeid, E. and Jeoti, V. and Samir, B.B. (2017) Per-antenna signal to leakage noise ratio precoding for MU-MIMO-OFDM system with reduced feedback. International Journal of Information and Communication Technology, 10 (2). pp. 206-217. ISSN 14666642

Safdar, T. and Hasbullah, H. and Saba, T. and Rehman, A. (2017) Minimizing the channel switching events for qos-based routing in cognitive radio Ad-Hoc network. Journal of Theoretical and Applied Information Technology, 95 (7). pp. 1370-1380. ISSN 19928645

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. (2017) Precursor and pressure dependent 3D graphene: A study on layer formation and type of carbon material. Diamond and Related Materials, 79. pp. 93-101. ISSN 09259635

Sakai, H. and Nakata, M. and Watada, J. (2017) A proposal of machine learning by rule generation from tables with non-deterministic information and its prototype system. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10313 . pp. 535-551. ISSN 03029743

Salam, M.A. and Abdullah, B. (2017) Catalysis mechanism of Pd-promoted γ-alumina in the thermal decomposition of methane to hydrogen: A density functional theory study. Materials Chemistry and Physics, 188. pp. 18-23. ISSN 02540584

Salam, M.A. and Abdullah, B. and Islam, M.A. (2017) Temperature programmed analysis of hydrogenation and dehydrogenation of magnesium (Mg), nickel (Ni) and aluminum (Al) containing mixed oxides. Chemical Engineering Research and Design, 118. pp. 103-111. ISSN 02638762

Salam, M.A. and Sufian, S. (2017) A DFT study of hydrogen adsorption kinetics and thermodynamics on mixed oxides of Mg0.5Ni0.25O1.13. Journal of Engineering and Applied Sciences, 12 (17). pp. 4431-4436. ISSN 1816949X

Sam, B. and Pao, W.K.S. and Nasif, M.S. and Ofei, T.N. (2017) Preliminary numerical simulation of steady-state gas-liquid flow in horizontal T-junction. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2570-2575. ISSN 18196608

Saman, N. and Johari, K. and Song, S.-T. and Kong, H. and Cheu, S.-C. and Mat, H. (2017) High removal efficacy of Hg(II) and MeHg(II) ions from aqueous solution by organoalkoxysilane-grafted lignocellulosic waste biomass. Chemosphere, 171. pp. 19-30. ISSN 00456535

Samsudin, M.F.R. and Sufian, S. and Bashiri, R. and Mohamed, N.M. and Ramli, R.M. (2017) Synergistic effects of pH and calcination temperature on enhancing photodegradation performance of m-BiVO4. Journal of the Taiwan Institute of Chemical Engineers, 81. pp. 305-315. ISSN 18761070

Saravanan, D.D.A. and Murugesan, T. and Arunagiri, A. (2017) Determination of design parameters for the cloud point extraction of remazol turquoise blue G-133 dye using triton X-114 surfactant. Desalination and Water Treatment, 60. pp. 228-241. ISSN 19443994

Sardar, S. and Wilfred, C.D. and Leveque, J.M. (2017) One-pot mannich base synthesis using task specific protic ionic liquids Sintesis bes mannich tunggal menggunakan cecair ionik terkhusus. Malaysian Journal of Analytical Sciences, 21 (5). pp. 1203-1209. ISSN 13942506

Sardar, S. and Wilfred, C.D. and Mumtaz, A. and Leveque, J.-M. (2017) Investigation of the Thermophysical Properties of AMPS-Based Aprotic Ionic Liquids for Potential Application in CO2 Sorption Processes. Journal of Chemical and Engineering Data, 62 (12). pp. 4160-4168. ISSN 00219568

Sarlan, A. and Wan Ahmad, W.F. and Rashikin, N.S. and Abdullah, M.Z. and Ahmad, R. (2017) The integration of engineering calculations: ENGIEPRO. Advanced Science Letters, 23 (11). pp. 10709-10714. ISSN 19366612

Sarwono, A. and Man, Z. and Muhammad, N. and Khan, A.S. and Hamzah, W.S.W. and Rahim, A.H.A. and Ullah, Z. and Wilfred, C.D. (2017) A new approach of probe sonication assisted ionic liquid conversion of glucose, cellulose and biomass into 5-hydroxymethylfurfural. Ultrasonics Sonochemistry, 37. pp. 310-319. ISSN 13504177

Sasmito, A.P. and Kurnia, J.C. and Shamim, T. and Mujumdar, A.S. (2017) Optimization of an open-cathode polymer electrolyte fuel cells stack utilizing Taguchi method. Applied Energy, 185. pp. 1225-1232. ISSN 03062619

Satar, I. and Daud, W.R.W. and Kim, B.H. and Somalu, M.R. and Ghasemi, M. (2017) Immobilized mixed-culture reactor (IMcR) for hydrogen and methane production from glucose. Energy, 139. pp. 1188-1196. ISSN 03605442

Satar, I. and Ghasemi, M. and Aljlil, S.A. and Isahak, W.N.R.W. and Abdalla, A.M. and Alam, J. and Daud, W.R.W. and Yarmo, M.A. and Akbarzadeh, O. (2017) Production of hydrogen by Enterobacter aerogenes in an immobilized cell reactor. International Journal of Hydrogen Energy, 42 (14). pp. 9024-9030. ISSN 03603199

Sattar, S. and Zulkifli, T.Z.A. (2017) A 2.4/5.2-GHz Concurrent Dual-Band CMOS Low Noise Amplifier. IEEE Access, 5. pp. 21148-21156. ISSN 21693536

Sautter, B. and Pubellier, M. and Jousselin, P. and Dattilo, P. and Kerdraon, Y. and Choong, C.M. and Menier, D. (2017) Late Paleogene rifting along the Malay Peninsula thickened crust. Tectonophysics, 710-71. pp. 205-224. ISSN 00401951

Savita, K.S. and Afifi, A.A.M. and Muniandy, M. (2017) Gesture control as assistive technology. Advanced Science Letters, 23 (11). pp. 11144-11148. ISSN 19366612

Savita, K.S. and Zainuddin, N.A. and Muniandy, M. and Mehat, M. (2017) A mobile based application on environmental education for primary school children in Malaysia. Journal of Theoretical and Applied Information Technology, 95 (22). pp. 6300-6313. ISSN 19928645

Schlaich, M. and Aigner, T. (2017) Facies and integrated sequence stratigraphy of an Epeiric Carbonate Ramp Succession: Dhruma Formation, Sultanate of Oman. Depositional Record, 3 (1). pp. 92-132. ISSN 20554877

Sebastian, P. and Voon, Y.V. and Comley, R. (2017) Parametric tracking across multiple cameras. Pertanika Journal of Science and Technology, 25 (S). pp. 159-168. ISSN 01287680

Sedighi, M. and Ghasemi, M. and Jahangiri, A. (2017) Catalytic performance of CeAPSO-34 molecular sieve with various cerium content for methanol conversion to olefin. Korean Journal of Chemical Engineering, 34 (4). pp. 997-1003. ISSN 02561115

Seng, L.K. and Ovinis, M. and Nagarajan and Seulin, R. and Morel, O. (2017) Vision-based state estimation of an unmanned aerial vehicle. Trends in Bioinformatics, 10 (1). pp. 11-19. ISSN 19947941

Serasa, A.S. and Lai, G.T. and Rafek, A.G. and Hussin, A. and Khai Ern, L. and Mohamed, T.R. (2017) Peak friction angle estimation from joint roughness coefficient of discontinuities of limestone in peninsular Malaysia. Sains Malaysiana, 46 (2). pp. 181-188. ISSN 01266039

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2017) Bio-inspired fault tolerant network on chip. Integration, the VLSI Journal, 58. pp. 155-166. ISSN 01679260

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2017) Review of network on chip architectures. Recent Advances in Electrical and Electronic Engineering, 10 (1). pp. 4-29. ISSN 23520965

Shafiai, S.H. and Shahruzzaman, D.B. and Xien, G.J. and Latheef, M. (2017) Lattice Boltzmann Method of a Flooding Accident at Gopeng, Perak, Malaysia. Mathematical Problems in Engineering, 2017. ISSN 1024123X

Shah, M.U.H. and Sivapragasam, M. and Moniruzzaman, M. and Talukder, M.M.R. and Yusup, S.B. and Goto, M. (2017) Production of sophorolipids by Starmerella bombicola yeast using new hydrophobic substrates. Biochemical Engineering Journal, 127. pp. 60-67. ISSN 1369703X

Shah, S.A.A. and Tang, T.B. and Faye, I. and Laude, A. (2017) Blood vessel segmentation in color fundus images based on regional and Hessian features. Graefe's Archive for Clinical and Experimental Ophthalmology, 255 (8). pp. 1525-1533. ISSN 0721832X

Shah Riman, N.I. and Abdullah, M.F. and Romlie, M.F. and Baharudin, Z. (2017) The third harmonic generated voltage by salient-pole synchronous generator during 3-phase�to�ground fault. International Transactions on Electrical Energy Systems, 27 (11). ISSN 20507038

Shahabudin, N. and Ibrahim, T. and Zamri, N.A.M. (2017) Portable pico linear generator design with different magnet shapes for wave energy conversion system. International Journal of Power Electronics and Drive Systems, 8 (1). pp. 360-366. ISSN 20888694

Shahbaz, M. and Yusup, S. and Ammar, M. and Inayat, A. and Patrick, D.O. (2017) Development of process flow sheet for syngas production from sorption enhanced steam gasification of palm kernel shell. Chemical Engineering Transactions, 61. pp. 1675-1680. ISSN 22839216

Shahbaz, M. and Yusup, S. and Inayat, A. and Ammar, M. and Patrick, D.O. and Pratama, A. and Naqvi, S.R. (2017) Syngas Production from Steam Gasification of Palm Kernel Shell with Subsequent CO2 Capture Using CaO Sorbent: An Aspen Plus Modeling. Energy and Fuels, 31 (11). pp. 12350-12357. ISSN 08870624

Shahbaz, M. and Yusup, S. and Inayat, A. and Patrick, D.O. and Ammar, M. and Pratama, A. (2017) Cleaner Production of Hydrogen and Syngas from Catalytic Steam Palm Kernel Shell Gasification Using CaO Sorbent and Coal Bottom Ash as a Catalyst. Energy and Fuels, 31 (12). pp. 13824-13833. ISSN 08870624

Shahbaz, M. and Yusup, S. and Inayat, A. and Patrick, D.O. and Pratama, A. and Ammar, M. (2017) Optimization of hydrogen and syngas production from PKS gasification by using coal bottom ash. Bioresource Technology, 241. pp. 284-295. ISSN 09608524

Shahbaz, M. and Yusup, S. and Naz, M.Y. and Sulaiman, S.A. and Inayat, A. and Partama, A. (2017) Fluidization of palm kernel shell, palm oil fronds, and empty fruit bunches in a swirling fluidized bed gasifier. Particulate Science and Technology, 35 (2). pp. 150-157. ISSN 02726351

Shahbaz, M. and yusup, S. and Inayat, A. and Patrick, D.O. and Ammar, M. (2017) The influence of catalysts in biomass steam gasification and catalytic potential of coal bottom ash in biomass steam gasification: A review. Renewable and Sustainable Energy Reviews, 73. pp. 468-476. ISSN 13640321

Shaheen, A.-U.-R. and Hussin, F.A. and Hamid, N.H. (2017) A hybrid delay design-for-testability for nonseparable RTL controller-data path circuits. Journal of Circuits, Systems and Computers, 26 (2). ISSN 02181266

Shaikh, M.S. and Shariff, A.M. and Garg, S. and Bustam, M.A. (2017) Physical properties of aqueous solutions of potassium l-prolinate from 298.15 to 343.15 K at atmospheric pressure. Chemical Papers, 71 (7). pp. 1185-1194. ISSN 03666352

Shaikh, P.H. and Nor, N.B.M. and Sahito, A.A. and Nallagownden, P. and Elamvazuthi, I. and Shaikh, M.S. (2017) Building energy for sustainable development in Malaysia: A review. Renewable and Sustainable Energy Reviews, 75. pp. 1392-1403. ISSN 13640321

Shamim, A. and Ghazali, Z. and Albinsson, P.A. (2017) Construction and validation of customer value co-creation attitude scale. Journal of Consumer Marketing, 34 (7). pp. 591-602. ISSN 07363761

Sharma, K.V. and Suleiman, A. and Hassan, H.S.B. and Hegde, G. (2017) Considerations on the Thermophysical Properties of Nanofluids. Topics in Mining, Metallurgy and Materials Engineering. pp. 33-70. ISSN 23643293

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. and Bakhsh, S.T. and Irfan, M. and Saad, N.B. (2017) An intelligent automated method to diagnose and segregate induction motor faults. Journal of Electrical Systems, 13 (2). pp. 241-254. ISSN 11125209

Sheng, A.L.K. and Bilad, M.R. and Osman, N.B. and Arahman, N. (2017) Sequencing batch membrane photobioreactor for real secondary effluent polishing using native microalgae: Process performance and full-scale projection. Journal of Cleaner Production, 168. pp. 708-715. ISSN 09596526

Sheng, L.W. and Basri, E.I. and Kamaruddin, S. (2017) Analysis on the effect of shop floor parameters on the effectiveness of preventive maintenance through discrete event simulation. Pertanika Journal of Science and Technology, 25 (1). pp. 1-16. ISSN 01287680

Shoaib, M. and Hamid, N.H. and Tariq Jan, M. and Zain Ali, N.B. (2017) Effects of Crack Faults on the Dynamics of Piezoelectric Cantilever-Based MEMS Sensor. IEEE Sensors Journal, 17 (19). pp. 6279-6294. ISSN 1530437X

Sholagberu, A.T. and Mustafa, M.R. and Yusof, K.W. and Hashim, A.M. (2017) Geo-statistical based susceptibility mapping of soil erosion and optimization of its causative factors: A conceptual framework. Journal of Engineering Science and Technology, 12 (11). pp. 2880-2895. ISSN 18234690

Shukla, V. and Hussin, F.A. and Hamid, N.H. and Ali, N.B.Z. (2017) Advances in testing techniques for digital microfluidic biochips. Sensors (Switzerland), 17 (8). ISSN 14248220

Shukla, V. and Hussin, F.A. and Hamid, N.H. and Ali, N.B.Z. and Chakrabarty, K. (2017) Offline Error Detection in MEDA-Based Digital Microfluidic Biochips Using Oscillation-Based Testing Methodology. Journal of Electronic Testing: Theory and Applications (JETTA), 33 (5). pp. 621-635. ISSN 09238174

Shukri, S.R.M. and Howes, A. (2017) Reward conditions modify children�s drawing behaviour. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10645 . pp. 455-465. ISSN 03029743

Shukrullah, S. and Mohamed, N.M. and Khan, Y. and Naz, M.Y. and Ghaffar, A. and Ahmad, I. (2017) Effect of Gas Flowrate on Nucleation Mechanism of MWCNTs for a Compound Catalyst. Journal of Nanomaterials, 2017. ISSN 16874110

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2017) Study of surface defects and crystallinity of MWCNTs growth in FCCVD. Science and Engineering of Composite Materials, 24 (6). pp. 845-851. ISSN 0334181X

Siddiqui, N.A. and Mathew, M.J. and Menier, D. and Hassaan, M. (2017) 2D and 3D seismic simulation for fault modeling: exploratory revision from the Gullfaks field. Journal of Petroleum Exploration and Production Technology, 7 (2). pp. 417-432. ISSN 21900558

Siddiqui, N.A. and Rahman, A.H.A. and Sum, C.W. and Mathew, M.J. and Hassaan, M. and Menier, D. (2017) Generic hierarchy of sandstone facies quality and static connectivity: an example from the Middle-Late Miocene Miri Formation, Sarawak Basin, Borneo. Arabian Journal of Geosciences, 10 (11). ISSN 18667511

Sidibé, D. and Sankar, S. and Lemaître, G. and Rastgoo, M. and Massich, J. and Cheung, C.Y. and Tan, G.S.W. and Milea, D. and Lamoureux, E. and Wong, T.Y. and Mériaudeau, F. (2017) An anomaly detection approach for the identification of DME patients using spectral domain optical coherence tomography images. Computer Methods and Programs in Biomedicine, 139. pp. 109-117. ISSN 01692607

Sikander, U. and Sufian, S. and Salam, M.A. (2017) A review of hydrotalcite based catalysts for hydrogen production systems. International Journal of Hydrogen Energy, 42 (31). pp. 19851-19868. ISSN 03603199

Simon, N. and De Roiste, M. and Crozier, M. and Rafek, A.G. (2017) Representing landslides as polygon (areal) or points? How different data types influence the accuracy of landslide susceptibility maps. Sains Malaysiana, 46 (1). pp. 27-34. ISSN 01266039

Sivapalan, S. (2017) Sustainability, blended learning and the undergraduate communication skills classroom: negotiating engineering undergraduates� expectations and perceptions. On the Horizon, 25 (1). pp. 7-23. ISSN 10748121

Soeung, S. and Cheab, S. and Wong, P.W. (2017) Lossy Asymmetrical Bandstop Filter Based on a Multiple Triplet Realization. IEEE Access, 6. pp. 1284-1291. ISSN 21693536

Soeung, S. and Wong, P.W. and Cheab, S. (2017) Highly selective lossy dual-band bandstop filter synthesis and design based on predistortion hybrid dual-band elliptic reflection function. Progress in Electromagnetics Research Letters, 66. pp. 15-23. ISSN 19376480

Soh, B. and Pao, W. and Chen, X.H. (2017) Numerical analyses for improved terminal velocity of deep water torpedo anchor. International Journal of Numerical Methods for Heat and Fluid Flow, 27 (2). pp. 428-443. ISSN 09615539

Sreenivasan, V. and Raja Sekhar, Y. and Sharma, K.V. (2017) Nanofluids for Enhanced Solar Thermal Energy Conversion. Topics in Mining, Metallurgy and Materials Engineering. pp. 115-148. ISSN 23643293

Subhani, A.R. and Mumtaz, W. and Saad, M.N.B.M. and Kamel, N. and Malik, A.S. (2017) Machine learning framework for the detection of mental stress at multiple levels. IEEE Access, 5. pp. 13545-13556. ISSN 21693536

Sulaiman, S. and Rambli, D.R.A. and Mean, F.O. and Tuan, N.M. and Zuki, F.S.M. (2017) Graphical representation of the navigation status in a web-based virtual museum. Advanced Science Letters, 23 (11). pp. 11444-11448. ISSN 19366612

Sulaiman, S.A. and Biga, B.K. and Chala, G.T. (2017) Injection of non-reacting gas into production pipelines to ease restart pumping of waxy crude oil. Journal of Petroleum Science and Engineering, 152. pp. 549-554. ISSN 09204105

Sulaimon, A.A. and Adeyemi, B.J. and Rahimi, M. (2017) Performance enhancement of selected vegetable oil as base fluid for drilling HPHT formation. Journal of Petroleum Science and Engineering, 152. pp. 49-59. ISSN 09204105

Sulaimon, A.A. and Tajuddin, M.Z.M. (2017) Application of COSMO-RS for pre-screening ionic liquids as thermodynamic gas hydrate inhibitor. Fluid Phase Equilibria, 450. pp. 194-199. ISSN 03783812

Suleman, H. and Maulud, A.S. and Man, Z. (2017) Reconciliation of outliers in CO2-alkanolamine-H2O datasets by robust neural network winsorization. Neural Computing and Applications, 28 (9). pp. 2621-2632. ISSN 09410643

Suleman, H. and Maulud, A.S. and Man, Z. (2017) VLE Determination of Carbon Dioxide Loaded Aqueous Alkanolamine Mixtures Using Modified Kent Eisenberg Model. Zeitschrift fur Physikalische Chemie, 231 (11-12). pp. 1891-1908. ISSN 09429352

Suleman, H. and Maulud, A.S. and Man, Z. (2017) A thermodynamic model for determination of carbon dioxide solubility and ionic speciation in aqueous alkanolamine solutions. Journal of the Chemical Society of Pakistan, 39 (3). pp. 374-383. ISSN 02535106

Suman, S. and Hussin, F.A. and Malik, A.S. and Ho, S.H. and Hilmi, I. and Leow, A.H.-R. and Goh, K.-L. (2017) Feature selection and classification of ulcerated lesions using statistical analysis for WCE images. Applied Sciences (Switzerland), 7 (10). ISSN 20763417

Sundararajan, V. and Selvaraj, G. and Ng, H.M. and Ramesh, S. and Ramesh, K. and Wilfred, C.D. and Bashir, S. (2017) Exploring the effect of novel N-butyl-6-methylquinolinium bis(trifluoromethylsulfonyl)imide ionic liquid addition to poly(methyl methacrylate-co-methacrylic) acid electrolyte system as employed in gel-state dye sensitized solar cells. Electrochimica Acta, 240. pp. 361-370. ISSN 00134686

T

Taghizadeh, S.K. and Rahman, S.A. and Halim, H.A. and Ahmad, N.H. (2017) Dwelling into Service Innovation Management Practices: A Comparison Between Telecommunication Industry in Malaysia and Bangladesh. Global Business Review, 18 (1). pp. 87-98. ISSN 09721509

Tahan, M. and Muhammad, M. and Abdul Karim, Z.A. (2017) Performance evaluation of a twin-shaft gas turbine engine in mechanical drive service. Journal of Mechanical Science and Technology, 31 (2). pp. 937-948. ISSN 1738494X

Tahan, M. and Muhammad, M. and Abdul Karim, Z.A. (2017) A multi-nets ANN model for real-time performance-based automatic fault diagnosis of industrial gas turbine engines. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (7). pp. 2865-2876. ISSN 16785878

Tahan, M. and Tsoutsanis, E. and Muhammad, M. and Abdul Karim, Z.A. (2017) Performance-based health monitoring, diagnostics and prognostics for condition-based maintenance of gas turbines: A review. Applied Energy, 198. pp. 122-144. ISSN 03062619

Tahir, S. and Bakhsh, S.T. and Altalhi, A.H. (2017) An Efficient Route Maintenance Protocol for Dynamic Bluetooth Networks. Journal of King Saud University - Computer and Information Sciences, 29 (4). pp. 449-461. ISSN 13191578

Taj and Deepthi, A.N. and Kumar, B.P. and Sree, S.N. (2017) A review on sub zero heat treatment for D2 steels. International Journal of Civil Engineering and Technology, 8 (7). pp. 47-62. ISSN 09766308

Taj and Prasad Nidumolu, E.C. and Geeta Krishna, P. and Prashanth Kumar, B. (2017) Finite element modeling and analysis of hip joint prosthesis with modular stem. International Journal of Mechanical Engineering and Technology, 8 (6). pp. 789-795. ISSN 09766340

Tan, C.S. and Lau, P.Y. and Low, T.J. (2017) Macroalgae recognition based on histogram oriented gradient. Lecture Notes in Electrical Engineering, 398. pp. 257-266. ISSN 18761100

Taqvi, S.A. and Tufa, L.D. and Zabiri, H. and Mahadzir, S. and Shah Maulud, A. and Uddin, F. (2017) Artificial neural network for anomalies detection in distillation column. Communications in Computer and Information Science, 751. pp. 302-311. ISSN 18650929

Tasfy, S. and Mohd Zabidi, N.A. and Shaharun, M.S. and Subbarao, D. (2017) Methanol production via CO2 hydrogenation reaction: Effect of catalyst support. International Journal of Nanotechnology, 14 (1-6). pp. 410-421. ISSN 14757435

Tasfy, S.F.H. and Zabidi, N.A.M. and Shaharun, M.S. and Subbarao, D. and Elbagir, A. (2017) Carbon dioxide hydrogenation to methanol over Cu/ZnO-SBA-15 catalyst: Effect of metal loading. Defect and Diffusion Forum, 380. pp. 151-160. ISSN 10120386

Tay, W.H. and Barashaid, A.A.B. and Lau, K.K. and Shariff, A.M. (2017) Effect of solution height on carbon dioxide absorption using high frequency ultrasonic irradiation. Chemical Engineering Transactions, 56. pp. 1225-1230. ISSN 22839216

Tay, W.H. and Lau, K.K. and Shariff, A.M. (2017) High frequency ultrasonic-assisted chemical absorption of CO2 using monoethanolamine (MEA). Separation and Purification Technology, 183. pp. 136-144. ISSN 13835866

Tay, W.H. and Lau, K.K. and Shariff, A.M. (2017) High performance promoter-free CO2 absorption using potassium carbonate solution in an ultrasonic irradiation system. Journal of CO2 Utilization, 21. pp. 383-394. ISSN 22129820

Teo, W. and Hing, K.L.M. and Liew, M.S. (2017) Interaction between internal shear reinforcement and external FRP systems of RC beams: Experimental study. Open Civil Engineering Journal, 11. pp. 143-152. ISSN 18741495

Teoh, C.S. and Mahmood, A.K. (2017) National cyber security strategies for digital economy. Journal of Theoretical and Applied Information Technology, 95 (23). pp. 6510-6522. ISSN 19928645

Thiruchelvam, L. and Asirvadam, V.S. and Dass, S.C. and Daud, H. and Gill, B.S. (2017) Dengue incidence prediction using model variables with registered case feedback. Lecture Notes in Electrical Engineering, 398. pp. 163-172. ISSN 18761100

Tijani, M.M. and Aqsha, A. and Mahinpey, N. (2017) Synthesis and study of metal-based oxygen carriers (Cu, Co, Fe, Ni) and their interaction with supported metal oxides (Al2O3, CeO2, TiO2, ZrO2) in a chemical looping combustion system. Energy, 138. pp. 873-882. ISSN 03605442

Ting, D.H. and Cheng, C.F.C. (2017) Developing pro-environmental behaviour: ecotourism fieldtrip and experiences. International Journal of Sustainability in Higher Education, 18 (7). pp. 1212-1229. ISSN 14676370

Ting, H. and Mering, M.W. and Adruce, S.A.Z. and Memon, M.A. (2017) Intention to attend the Rainforest World Music Festival: Local visitor perspectives. Tourism, Culture and Communication, 17 (2). pp. 119-129. ISSN 1098304X

Togunwa, O.S. and Abdullah, W.H. (2017) Geochemical characterization of Neogene sediments from onshore West Baram Delta Province, Sarawak: Paleoenvironment, source input and thermal maturity. Open Geosciences, 9 (1). pp. 302-313. ISSN 23915447

Toledo Hijo, A.A.C. and Maximo, G.J. and Costa, M.C. and Cunha, R.L. and Pereira, J.F.B. and Kurnia, K.A. and Batista, E.A.C. and Meirelles, A.J.A. (2017) Phase Behavior and Physical Properties of New Biobased Ionic Liquid Crystals. Journal of Physical Chemistry B, 121 (14). pp. 3177-3189. ISSN 15206106

Toloue, I. and Liew, M.S. and Harahap, I.S.H. (2017) The effect of element types on force analogy method analysis. Journal of Engineering and Technological Sciences, 49 (6). pp. 785-798. ISSN 23375779

Tomi, A. and Rambli, D.R.A. (2017) A conceptual design of spatial calibration for optical see-through head mounted display using electroencephalographic signal processing on eye tracking. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10645 . pp. 331-339. ISSN 03029743

Tsai, C.-Y. and Liu, C.-W. and Chan, Y.H. and Chang, T.-Y. and Chen, B.-C. and Hsi, H.-C. (2017) Development of HCl-treated titania nanotube photocatalysts for dye photodegradation and low-concentration elemental mercury removal. Catalysis Today, 297. pp. 113-123. ISSN 09205861

Tsegab, H. and Sum, C.W. and Yuriy, G.A. and Hunter, A.W. and Talib, J.A.B. and Kassa, S. (2017) Higher-resolution biostratigraphy for the kinta limestone and an implication for continuous sedimentation in the paleo-tethys, western belt of peninsular Malaysia. Turkish Journal of Earth Sciences, 26 (5). pp. 377-394. ISSN 13000985

Tyng, C.M. and Amin, H.U. and Saad, M.N.M. and Malik, A.S. (2017) The influences of emotion on learning and memory. Frontiers in Psychology, 8 (AUG). ISSN 16641078

U

Uemura, Y. and Sellappah, V. and Trinh, T.H. and Hassan, S. and Tanoue, K.-I. (2017) Torrefaction of empty fruit bunches under biomass combustion gas atmosphere. Bioresource Technology, 243. pp. 107-117. ISSN 09608524

Ullah, H. and Wilfred, C.D. and Shaharun, M.S. (2017) Ionic liquid based ultrasonication-assisted extraction of essential oil from the leaves of Persicaria minor and conductor-like screening model for realistic solvents study. Chinese Journal of Chromatography (Se Pu), 35 (6). pp. 656-664. ISSN 10008713

Ullah, H. and Wilfred, C.D. and Shaharun, M.S. (2017) Synthesis of Silver Nanoparticles Using Ionic-Liquid-Based Microwave-Assisted Extraction from Polygonum minus and Photodegradation of Methylene Blue. Journal of the Chinese Chemical Society, 64 (10). pp. 1164-1171. ISSN 00094536

Ullah, S. and Ahmad, F. and Shariff, A.M. and Bustam, M.A. and Gonfa, G. and Gillani, Q.F. (2017) Effects of ammonium polyphosphate and boric acid on the thermal degradation of an intumescent fire retardant coating. Progress in Organic Coatings, 109. pp. 70-82. ISSN 03009440

Ullah, S. and Ahmad, F. and Shariff, A.M. and Raza, M.R. and Masset, P.J. (2017) The role of multi-wall carbon nanotubes in char strength of epoxy based intumescent fire retardant coating. Journal of Analytical and Applied Pyrolysis, 124. pp. 149-160. ISSN 01652370

Ullah, S. and Bustam, M.A. and Shariff, A.M. and Gonfa, G. and Ayoub, M. and Raihan, M. (2017) Experimental study of corrosion on A36 mild steel towards aqueous 2-Amino-2-Ethyl-1, 3-Propanediol and diethanolamine. International Journal of Electrochemical Science, 12 (2). pp. 1642-1656. ISSN 14523981

Ullah, S. and Daud, H. and Dass, S.C. and Khan, H.N. and Khalil, A. (2017) Detecting space-time disease clusters with arbitrary shapes and sizes using a co-clustering approach. Geospatial Health, 12 (2). pp. 210-216. ISSN 18271987

Ullah, Z. and Bustam, M.A. and Man, Z. and Khan, A.S. and Muhammad, N. and Sarwono, A. (2017) Preparation and kinetics study of biodiesel production from waste cooking oil using new functionalized ionic liquids as catalysts. Renewable Energy, 114. pp. 755-765. ISSN 09601481

Ullah, Z. and Bustam, M.A. and Man, Z. and Khan, A.S. and Muhammad, N. and Sarwono, A. and Farooq, M. and Ullah, R. and Mengal, A.N. (2017) A Detail Description on Catalytic Conversion of Waste Palm Cooking Oil into Biodiesel and Its Derivatives: New Functionalized Ionic Liquid Process. ChemistrySelect, 2 (27). pp. 8583-8595. ISSN 23656549

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Khamidi, M.F. (2017) A review on adoption of novel techniques in construction waste management and policy. Journal of Material Cycles and Waste Management, 19 (4). pp. 1361-1373. ISSN 14384957

Umar Salihi, I. and Rahman Mohamed Kutty, S. and Hasnain Isa, M. (2017) Equilibrium and kinetic studies on lead (II) adsorption by sugarcane bagasse derived activated carbon. International Journal of Engineering, Transactions B: Applications, 30 (11). pp. 1647-1653. ISSN 1728144X

Usama, M. and Zakaria, N. (2017) Chaos-based simultaneous compression and encryption for Hadoop. PLoS ONE, 12 (1). ISSN 19326203

Usmani, M.A. and Khan, I. and Bhat, A.H. and Pillai, R.S. and Ahmad, N. and Mohamad Haafiz, M.K. and Oves, M. (2017) Current trend in the application of nanoparticles for waste water treatment and purification: A review. Current Organic Synthesis, 14 (2). pp. 206-226. ISSN 15701794

ul Islam, B. and Baharudin, Z. (2017) A meta-heuristics based input variable selection technique for hybrid electrical energy demand prediction models. International Journal of Simulation: Systems, Science and Technology, 17 (41). 4.1-4.5. ISSN 14738031

V

Vakili, M. and Rafatullah, M. and Ibrahim, M.H. and Abdullah, A.Z. and Gholami, Z. and Salamatinia, B. (2017) Enhancing reactive blue 4 adsorption through chemical modification of chitosan with hexadecylamine and 3-aminopropyl triethoxysilane. Journal of Water Process Engineering, 15. pp. 49-54. ISSN 22147144

Vasant, P. and Kose, U. and Watada, J. (2017) Metaheuristic techniques in enhancing the efficiency and performance of thermo-electric cooling devices. Energies, 10 (11). ISSN 19961073

Vasant, P. and Watada, J. (2017) Special Issue On: Optimization for Engineering, Science and Technology. Intelligent Decision Technologies, 11 (1). p. 1. ISSN 18724981

Vijayan, B.L. and Krishnan, S.G. and Zain, N.K.M. and Harilal, M. and Yar, A. and Misnon, I.I. and Dennis, J.O. and Yusoff, M.M. and Jose, R. (2017) Large scale synthesis of binary composite nanowires in the Mn2O3-SnO2 system with improved charge storage capabilities. Chemical Engineering Journal, 327. pp. 962-972. ISSN 13858947

W

Wahhab, H.A.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. and Afolabi, L.O. (2017) Prediction of the phase distribution of diesel/CNG bubbly flow in a horizontal pipe under the influence of a magnetic field. Journal of Mechanical Science and Technology, 31 (11). pp. 5299-5309. ISSN 1738494X

Y

YAVARI, S. and MALAKAHMAD, A. and SAPARI, N.B. (2017) Phytoremediation of urea fertilizer factory wastewater by teak (tectona grandis). Environment Protection Engineering, 43 (4). pp. 5-15. ISSN 03248828

Yaakob, A.B. and Sulaimon, A.A. (2017) Performance assessment of plant extracts as green demulsifiers. Journal of the Japan Petroleum Institute, 60 (4). pp. 186-193. ISSN 13468804

Yahaya Khan, M. and Abdul Karim, Z.A. and Aziz, A.R.A. and Heikal, M.R. and Crua, C. (2017) Puffing and microexplosion behavior of water in pure diesel emulsion droplets during leidenfrost effect. Combustion Science and Technology, 189 (7). pp. 1186-1197. ISSN 00102202

Yahya, N. and Alqasem, B. and Irfan, M. and Qureshi, S. and Rehman, Z.U. and Shafie, A. and Soleimani, H. (2017) The effect of saturation magnetization of nanocatalyst and oscillating magnetic field for green urea synthesis. Physica B: Condensed Matter, 507. p. 95. ISSN 09214526

Yahya, N. and Qureshi, S. and Rehman, Z.U. and Alqasem, B. and Fai Kait, C. (2017) Green urea synthesis catalyzed by hematite nanowires in magnetic field. Journal of Magnetism and Magnetic Materials, 428. pp. 469-480. ISSN 03048853

Yahya, W.Z.N. and Meng, W.T. and Khatani, M. and Samsudin, A.E. and Mohamed, N.M. (2017) Bio-based chitosan/PVdF-HFP polymer-blend for quasi-solid state electrolyte dye-sensitized solar cells. E-Polymers, 17 (5). pp. 355-361. ISSN 16187229

Yap, K.H. and Ung, W.C. and Ebenezer, E.G.M. and Nordin, N. and Chin, P.S. and Sugathan, S. and Chan, S.C. and Yip, H.L. and Kiguchi, M. and Tang, T.B. (2017) Visualizing hyperactivation in neurodegeneration based on prefrontal oxygenation: A comparative study of mild Alzheimer's disease, mild cognitive impairment, and healthy controls. Frontiers in Aging Neuroscience, 9 (SEP). ISSN 16634365

Yaqub, A. and Isa, M.H. and Ajab, H. and Junaid, M. (2017) Electrochemical degradation of petroleum hydrocarbons (PAHS) from synthetic aqueous solutions. Petroleum Chemistry, 57 (5). pp. 457-465. ISSN 09655441

Yaqub, A. and Isa, M.H. and Ajab, H. and Junaid, M. (2017) Preparation of Ti/TiO2 anode for electrochemical oxidation of toxic priority pollutants. Journal of New Materials for Electrochemical Systems, 20 (1). pp. 7-12. ISSN 14802422

Yaqub, A. and Isa, M.H. and Ajab, H. and Kutty, S.R. and Ezechi, E.H. (2017) Polycyclic aromatic hydrocarbons removal from produced water by electrochemical process optimization. Ecological Chemistry and Engineering S, 24 (3). pp. 397-404. ISSN 18986196

Yaro, A.S. and Sha�Ameri, A.Z. and Kamel, N. (2017) Ground receiving station reference pair selection technique for a minimum configuration 3D emitter position estimation multilateration system. Advances in Electrical and Electronic Engineering, 15 (3). pp. 391-399. ISSN 13361376

Yasir, M. and Azizan, M.T. and Ameen, M. and Ramli, A. (2017) Solvothermal synthesis of anatase tio2 nanosheets with exposed 001 facets. Sains Malaysiana, 46 (12). pp. 2515-2521. ISSN 01266039

Yau, X.H. and Yew, K.Y. and Khe, C.S. and Rajalingam, S. and Lai, C.W. and Liu, W.W. (2017) Facile one pot synthesis of highly stable L-ascorbic acid coated magnetite nanoparticles dispersion. Digest Journal of Nanomaterials and Biostructures, 12 (2). pp. 401-413. ISSN 18423582

Yavari, S. and Malakahmad, A. and Sapari, N.B. (2017) Phytoremediation of urea fertilizer factory wastewater by teak (Tectona grandis). Environment Protection Engineering, 43 (4). pp. 5-15. ISSN 03248828

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. (2017) Sorption properties optimization of agricultural wastes-derived biochars using response surface methodology. Process Safety and Environmental Protection, 109. pp. 509-519. ISSN 09575820

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. (2017) Synthesis optimization of oil palm empty fruit bunch and rice husk biochars for removal of imazapic and imazapyr herbicides. Journal of Environmental Management, 193. pp. 201-210. ISSN 03014797

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. (2017) Treatment of urea manufacturing facility effluent by Hopea odorata and Khaya ivorensis. Water Science and Technology, 75 (7). pp. 1684-1692. ISSN 02731223

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. and Khan, E. (2017) Nutrient balancing for phytoremediation enhancement of urea manufacturing raw wastewater. Journal of Environmental Management, 202. pp. 225-231. ISSN 03014797

Yekeen, N. and Manan, M.A. and Idris, A.K. and Samin, A.M. and Risal, A.R. (2017) Experimental investigation of minimization in surfactant adsorption and improvement in surfactant-foam stability in presence of silicon dioxide and aluminum oxide nanoparticles. Journal of Petroleum Science and Engineering, 159. pp. 115-134. ISSN 09204105

Yiin, C.L. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2017) Choline chloride (ChCl) and monosodium glutamate (MSG)-based green solvents from optimized cactus malic acid for biomass delignification. Bioresource Technology, 244. pp. 941-948. ISSN 09608524

Yim, S.C. and Quitain, A.T. and Yusup, S. and Sasaki, M. and Uemura, Y. and Kida, T. (2017) Metal oxide-catalyzed hydrothermal liquefaction of Malaysian oil palm biomass to bio-oil under supercritical condition. Journal of Supercritical Fluids, 120. pp. 384-394. ISSN 08968446

Yin, Y.C. and Kait, C.F. and Fatimah, H. and Wilfred, C. and Taha, M.F.B. and Yunus, N.B.M. (2017) Preparation and characterization of Mg/TiO2 for visible light photooxidative-extractive deep desulfurization. Sains Malaysiana, 46 (3). pp. 493-501. ISSN 01266039

Yousuff, C.M. and Danish, M. and Ho, E.T.W. and Basha, I.H.K. and Hamid, N.H.B. (2017) Study on the optimum cutting parameters of an aluminum mold for effective bonding strength of a PDMS microfluidic device. Micromachines, 8 (8). ISSN 2072666X

Yousuff, C.M. and Ho, E.T.W. and Ismail Hussain, K. and Hamid, N.H.B. (2017) Microfluidic platform for cell isolation and manipulation based on cell properties. Micromachines, 8 (1). ISSN 2072666X

Yu, S.Y. and Choi, H.S. and Park, K.S. and Kim, Y.T. and Kim, D.K. (2017) Advanced procedure for estimation of pipeline embedment on soft clay seabed. Structural Engineering and Mechanics, 62 (4). pp. 381-389. ISSN 12254568

Yueze, L. and Akhtar, S. and Sasmito, A.P. and Kurnia, J.C. (2017) Prediction of air flow, methane, and coal dust dispersion in a room and pillar mining face. International Journal of Mining Science and Technology, 27 (4). pp. 657-662. ISSN 20952686

Yusof, K.W. and Babangida, N.M. and Mustafa, M.R. and Isa, M.H. (2017) Linear kernel support vector machines for modeling pore-water pressure responses. Journal of Engineering Science and Technology, 12 (8). pp. 2202-2212. ISSN 18234690

Yusoff, N.M. and Ahmad, R.F. and Guillet, C. and Malik, A.S. and Saad, N.M. and Merienne, F. (2017) Selection of Measurement Method for Detection of Driver Visual Cognitive Distraction: A Review. IEEE Access, 5. pp. 22844-22854. ISSN 21693536

Yusuf, N.R. and Kamil, R.N.M. and Yusup, S. (2017) Physicochemical properties and structural characterisation of fatty acids derived from Jatropha curcas oil using microwave assisted alkaline hydrolysis. Journal of Physical Science, 28. pp. 269-279. ISSN 16753402

Z

Zafar, A. and Awang, M. and Khan, S.R. (2017) Friction stir welding of polymers: An overview. Lecture Notes in Mechanical Engineering. pp. 19-36. ISSN 21954356

Zafar, F. and Mandal, P.C. and Shaari, K.Z.B.K. and Ullah, Z. (2017) Coupling of subcritical methanol with acidic ionic liquids for the acidity reduction of naphthenic acids. Polish Journal of Chemical Technology, 19 (3). pp. 68-74. ISSN 15098117

Zafar, R. and Dass, S.C. and Malik, A.S. (2017) Electroencephalogram-based decoding cognitive states using convolutional neural network and likelihood ratio based score fusion. PLoS ONE, 12 (5). ISSN 19326203

Zafar, R. and Dass, S.C. and Malik, A.S. and Kamel, N. and Rehman, M.J.U. and Ahmad, R.F. and Abdullah, J.M. and Reza, F. (2017) Prediction of Human Brain Activity Using Likelihood Ratio Based Score Fusion. IEEE Access, 5. pp. 13010-13019. ISSN 21693536

Zafar, R. and Kamel, N. and Naufal, M. and Malik, A.S. and Dass, S.C. and Ahmad, R.F. and Abdullah, J.M. and Reza, F. (2017) Decoding of visual activity patterns from fMRI responses using multivariate pattern analyses and convolutional neural network. Journal of Integrative Neuroscience, 16 (3). pp. 275-289. ISSN 02196352

Zahari, M.K. and Ahmad, B.H. and Wen, W.P. and Shairi, N.A. (2017) Switchable absorptive bandstop to bandpass filter using stepped-impedance dual mode resonator. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-13). pp. 17-21. ISSN 21801843

Zahari, M.K. and Ahmad, B.H. and Wen, W.P. and Shairi, N.A. and Mutalib, M.A. and Hassan, N. (2017) An investigation of switchable matched bandstop to bandpass filter based on lossy resonator. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-5). pp. 119-123. ISSN 21801843

Zahid, M. and Shafiq, N. and Nuruddin, M.F. and Nikbakht, E. and Jalal, A. (2017) Effect of partial replacement of fly ash by metakaolin on strength development of fly ash based geopolymer mortar. Key Engineering Materials, 744 74. pp. 131-135. ISSN 10139826

Zahidah, K.A. and Kakooei, S. and Ismail, M.C. and Bothi Raja, P. (2017) Halloysite nanotubes as nanocontainer for smart coating application: A review. Progress in Organic Coatings, 111. pp. 175-185. ISSN 03009440

Zahidah, K.A. and Kakooei, S. and Kermanioryani, M. and Mohebbi, H. and Ismail, M.C. and Raja, P.B. (2017) Benzimidazole-loaded halloysite nanotube as a smart coating application. International Journal of Engineering and Technology Innovation, 7 (4). pp. 243-254. ISSN 22235329

Zahraee, S.M. and Assadi, M.K. (2017) Applications and challenges of the palm biomass supply chain in Malaysia. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5789-5793. ISSN 18196608

Zaid, H.M. and Adil, M. and Lee, K.C. (2017) Structural and morphological evolution of metal oxide nanoparticles synthesised via sol-gel auto-combustion. International Journal of Nanotechnology, 14 (1-6). pp. 284-296. ISSN 14757435

Zakaria, Z.A. and Hasan, K.N.M. and Razak, M.F.A. and Yaacob, A. and Othman, A.R. (2017) Experimental study on tensile strength of butt joints for mild steel with thickness 6mm using Gas Metal Arc Welding (GMAW). Key Engineering Materials, 740 KE. pp. 155-160. ISSN 10139826

Zakaria, Z.A. and Yaacob, A. and Mokri, K.N. and Hanaffi, M.S. and Zainol, M.Z. and Ganesan, L. and Ishak, M.F. and Majid, M.A. and Hasan, K.N.M. (2017) Development of cost effective Ultrasonic Testing thickness measurement specimens and basic laboratory guidelines for UniKL MIMET. ARPN Journal of Engineering and Applied Sciences, 12 (6). pp. 1961-1967. ISSN 18196608

Zakariya, M.A. and Ali, S.M. and Baharudin, Z. and Rehman, M.Z.U. and Abdullah, S.M.C. and Khan, A.M. and Khan, M.T. (2017) Investigation of DGS CDRA for high gain applications. Lecture Notes in Electrical Engineering, 398. pp. 571-580. ISSN 18761100

Zaman, N. and Ilyas, M. and Ahmad, M. and Mohammad, F. and Abdullah, A. (2017) An experimental research in health informatics for designing an enhanced intelligent could-based collaborative multi-modal framework for medical imaging diagnostics. Journal of Medical Imaging and Health Informatics, 7 (6). pp. 1358-1364. ISSN 21567018

Zamri, N.A.K. and Sulam, M. and Merican, A.M.N. (2017) Tracing the trajectories of history of Malaysia: Exploring historical consciousness in sarawak. Pertanika Journal of Social Sciences and Humanities, 25 (Februa). pp. 219-228. ISSN 01287702

Zamri, N.A.M. and Ibrahim, T. and Nor, N.M. (2017) Design and modelling of generator for wave energy conversion system in Malaysia. International Journal of Simulation: Systems, Science and Technology, 17 (41). 23.1-23.6. ISSN 14738031

Zamri, N.A.M. and Ibrahim, T. and Nor, N.M. (2017) Direct drive linear generator designs with aluminium spacer and alternate slot winding for wave energy conversion system. International Journal on Advanced Science, Engineering and Information Technology, 7 (4). pp. 1282-1288. ISSN 20885334

Zee, E. and Wong, P.W. (2017) Design and synthesis of dual-band microwave bandpass filter based on hybrid polynomials. Progress In Electromagnetics Research C, 72. pp. 141-149. ISSN 19378718

Zia-ul-Mustafa, M. and Ahmad, F. and Ullah, S. and Amir, N. and Gillani, Q.F. (2017) Thermal and pyrolysis analysis of minerals reinforced intumescent fire retardant coating. Progress in Organic Coatings, 102. pp. 201-216. ISSN 03009440

Zulkafli, A.Z. and Basri, S. and Ahmad, R. and Imam, A.A. (2017) A framework for image synchronization from mobile NoSQL database to server-side SQL database. Advances in Intelligent Systems and Computing, 575. pp. 179-191. ISSN 21945357

Zulkarnain, N.F. and Ibrahim, T. and Romlie, M.F. (2017) Analysis of radial and halbach permanent magnet configurations for ceiling fan applications. International Journal of Simulation: Systems, Science and Technology, 17 (41). 22.1-22.6. ISSN 14738031