A

Ab. Rahim, L. and Whittle, J. (2015) A survey of approaches for verifying model transformations. Software and Systems Modeling, 14 (2). pp. 1003-1028. ISSN 16191366

Abbas, M.A. and Wan Ahmad, W.F. and Kalid, K.S. (2015) A semantic web based framework for preschool cognitive skills tutoring system. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17758-17765. ISSN 18196608

Abbas, T. and Kallidanthiyil Chellappan, L. and Mutalib, M.I.A. and Cheun, K.Y. and Nasir Shah, S. and Nazir, S. and Hassan, A. and Abai, M.B. and Khan, E. (2015) Stability and Performance of Physically Immobilized Ionic Liquids for Mercury Adsorption from a Gas Stream. Industrial and Engineering Chemistry Research, 54 (48). pp. 12114-12123. ISSN 08885885

Abbas, T. and Nazir, S. and �vergård, K.I. and Manca, D. and Abdul Mutalib, M.I. and Khan, E. (2015) Hazards of mercury-safety perspectives and measures. Chemical Engineering Transactions, 43. pp. 2143-2148. ISSN 22839216

Abbasi, A.Z. and Jamak, A.B.S.A. (2015) A conceptual model: Video-game engagement and its moderating impact on consumers� personality. Advanced Science Letters, 21 (5). pp. 1216-1220. ISSN 19366612

Abbasi, I. and Ali, S.S.A. and Ovinis, M. and Naeem, W. (2015) Adaptive identification of underwater glider using U-model for depth & pitch control under hydrodynamic disturbances. Jurnal Teknologi, 74 (9). pp. 113-118. ISSN 01279696

Abbasi, I. and Ali, S.S.A. and Ovinis, M. and Naeem, W. (2015) Adaptive identification of underwater glider using U-model for depth & pitch control under hydrodynamic disturbances. Jurnal Teknologi, 74 (9). pp. 113-118. ISSN 01279696

Abdalla, M.O. and Nagarajan, T. (2015) A computational study of the actuation speed of the hydraulic cylinder under different ports� sizes and configurations. Journal of Engineering Science and Technology, 10 (2). pp. 160-173. ISSN 18234690

Abdel-Aty, A.-H. and Zakaria, N. and Cheong, L.Y. and Metwally, N. (2015) Entanglement and teleportation via partial entangled-state quantum network. Journal of Computational and Theoretical Nanoscience, 12 (9). pp. 2213-2220. ISSN 15461955

Abdul Halim, H.N. and Shariff, A.M. and Tan, L.S. and Bustam, M.A. (2015) Mass transfer performance of CO2 absorption from natural gas using monoethanolamine (MEA) in high pressure operations. Industrial and Engineering Chemistry Research, 54 (5). pp. 1675-1680. ISSN 08885885

Abdul Karim, S.A. (2015) Shape preserving by using rational cubic ball interpolant. Far East Journal of Mathematical Sciences, 96 (2). pp. 211-230. ISSN 09720871

Abdul Karim, S.A. and Voon Pang, K. and Saaban, A. (2015) Positivity preserving interpolation using rational bicubic spline. Journal of Applied Mathematics, 2015. ISSN 1110757X

Abdul Majid, N.D. and Mohd Shariff, A. and Rusli, R. (2015) Process Safety Management (PSM) for managing contractors in process plant. Journal of Loss Prevention in the Process Industries, 37. pp. 82-90. ISSN 09504230

Abdul Rahim, R.H. and Rahmiati, T. and Azizli, K.A. and Man, Z. and Nuruddin, M.F. and Ismail, L. (2015) Comparison of using NaOH and KOH activated fly ash-based geopolymer on the mechanical properties. Materials Science Forum, 803. pp. 179-184. ISSN 02555476

Abdulkadir, S.J. and Yong, S.-P. (2015) Scaled UKF�NARX hybrid model for multi-step-ahead forecasting of chaotic time series data. Soft Computing, 19 (12). pp. 3479-3496. ISSN 14327643

Abdullah, M.A. and Afzaal, M. and Ismail, Z. and Ahmad, A. and Nazir, M.S. and Bhat, A.H. (2015) Comparative study on structural modification of Ceiba pentandra for oil sorption and palm oil mill effluent treatment. Desalination and Water Treatment, 54 (11). pp. 3044-3053. ISSN 19443994

Abdullah, M.R.T.L. and Siraj, S. and Yean, L.L. (2015) Perception of undergraduates on their language competence based on english language national examination results. Pertanika Journal of Social Sciences and Humanities, 23 (August). pp. 55-72. ISSN 01287702

Abid, S.A. and Othman, M. and Shah, N. and Sabir, O. and Khan, A.U.R. and Ali, M. and Shafi, J. and Ullah, S. (2015) Merging of DHT-based logical networks in MANETs. Transactions on Emerging Telecommunications Technologies, 26 (12). pp. 1347-1367. ISSN 21615748

Abidin, M.U.S.Z. and Mukhtar, H. and Shaharun, M.S. (2015) Effect of pH on flux and rejection for diglycolamine and triethanolamine. Chemical Engineering Transactions, 45. pp. 1429-1434. ISSN 22839216

Adam, I.K. and Aziz, A.R.A. and Yusup, S. (2015) Determination of diesel engine performance fueled biodiesel (Rubber seed/palm oil mixture) diesel blend. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2675-2685. ISSN 22298649

Adeyemi, B.J. and Sulaimon, A.A. (2015) Investigating the kinetics of water-in-crude oil emulsion stability. ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7131-7136. ISSN 18196608

Afrooz, I.E. and �chsner, A. (2015) Effect of the carbon nanotube distribution on the thermal conductivity of composite materials. Journal of Heat Transfer, 137 (3). ISSN 00221481

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2015) Aerobic and anaerobic co-cultivation of Nannochloropsis oculata with oil palm empty fruit bunch for enhanced biomethane production and palm oil mill effluent treatment. Desalination and Water Treatment, 56 (8). pp. 2055-2065. ISSN 19443994

Ahmad, A.H. and Mahmood, A.K. and Jaafar, J. (2015) The architecture of fuzzy agent in rescuer monitoring system. American Journal of Engineering and Applied Sciences, 8 (3). pp. 345-353. ISSN 19417020

Ahmad, F. and Lau, K.K. and Lock, S.S.M. and Rafiq, S. and Khan, A.U. and Lee, M. (2015) Hollow fiber membrane model for gas separation: Process simulation, experimental validation and module characteristics study. Journal of Industrial and Engineering Chemistry, 21. pp. 1246-1257. ISSN 1226086X

Ahmad, J. and Malik, A.S. and Abdullah, M.F. and Kamel, N. and Xia, L. (2015) A novel method for vegetation encroachment monitoring of transmission lines using a single 2D camera. Pattern Analysis and Applications, 18 (2). pp. 419-440. ISSN 14337541

Ahmad, M. and Rahim, L.A.B. and Arshad, N.I. (2015) An analysis of educational games design frameworks from software engineering perspective. Journal of Information and Communication Technology, 14 (1). pp. 123-151. ISSN 1675414X

Ahmad, N.N.R. and Mukhtar, H. and Man, Z. and Mohshim, D.F. (2015) Synthesis and characterization of EDA-functionalized polyethersulfone/SAPO-34 mixed matrix membrane. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6192-6195. ISSN 18196608

Ahmad, T. and Ahmad, R. and Kamran, M. and Wahjoedi, B. and Shakoor, I. and Hussain, F. and Riaz, F. and Jamil, Z. and Isaac, S. and Ashraf, Q. (2015) Effect of Thal silica sand nanoparticles and glass fiber reinforcements on epoxy-based hybrid composite. Iranian Polymer Journal (English Edition), 24 (1). pp. 21-27. ISSN 10261265

Ahmad, W.F.W. and Azahari, I.N.N. (2015) Visual approach of a mobile application for autistic children: Little routine. Communications in Computer and Information Science, 529. pp. 436-442. ISSN 18650929

Ahmed, M.O. and Yenduri, A. and Kurian, V.J. (2015) Investigation on the dynamic responses of a truss spar platform for different mooring line groups. Journal of Marine Science and Application, 14 (2). pp. 189-195. ISSN 16719433

Ahmed, S. and Kaur Johl, S. and Bin Abdul Jamak, A.B.S. and Mohamed Noor, A.B. (2015) Mind the purchasers� disturbance: Exploring planned purchasers� influences. Advanced Science Letters, 21 (5). pp. 1381-1384. ISSN 19366612

Ahsanullah and Sulaiman, S. and Mahmood, A.K.B. and Khan, M. (2015) Understanding factors influencing User Experience of interactive systems: A literature review. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 18175-18185. ISSN 18196608

Ahsanullah and Sulaiman, S. and Mahmood, A.K.B. and Khan, M. and Madni, M. (2015) Applications of multi-touch tabletop displays and their challenging issues: An overview. International Journal on Smart Sensing and Intelligent Systems, 8 (2). pp. 966-991. ISSN 11785608

Aissaoui, T. and Alnashef, I.M. and Hayyan, M. and Hashim, M.A. (2015) Erratum: Neoteric FT-IR investigation on the functional groups of phosphonium-based deep eutectic solvents (Spectrochim. Acta Part A: Mol. Biomol. Spectrosc. (2015) 149 (588-591) DOI: 10.1016/j.saa.2015.05.001 PII: S1386142515005892). Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, 149. R1. ISSN 13861425

Aissaoui, T. and Alnashef, I.M. and Hayyan, M. and Hashim, M.A. (2015) Neoteric FT-IR investigation on the functional groups of phosphonium-based deep eutectic solvents. Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, 149. pp. 588-591. ISSN 13861425

Akhir, M.K.M. and Sulaiman, J. and Othman, M. and Majid, Z.A. and Muthuvalu, M.S. and Aruchunan, E. (2015) Application of four-point MEGMSOR method for the solution of 2D helmholtz equations. International Journal of Mathematical Analysis, 9 (37-40). pp. 1847-1862. ISSN 13128876

Akhtar, S. and Kurnia, J.C. and Shamim, T. (2015) A three-dimensional computational model of H2-air premixed combustion in non-circular micro-channels for a thermo-photovoltaic (TPV) application. Applied Energy, 152. pp. 47-57. ISSN 03062619

Al Riza, D.F. and Gilani, S.I.U.H. and Aris, M.S. (2015) Standalone photovoltaic systems sizing optimization using design space approach: Case study for residential lighting load. Journal of Engineering Science and Technology, 10 (7). pp. 943-957. ISSN 18234690

Al-Jemeli, M. and Hussin, F.A. (2015) An energy efficient cross-layer network operation model for IEEE 802.15.4-based mobile wireless sensor networks. IEEE Sensors Journal, 15 (2). pp. 684-692. ISSN 1530437X

Al-Kayiem, H.H. and Heng, Y.M. (2015) Experimental investigation of rooftop solar chimney for natural ventilation. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10249-10254. ISSN 18196608

Al-Kayiem, H.H. and Yassen, T.A. (2015) On the natural convection heat transfer in a rectangular passage solar air heater. Solar Energy, 112. pp. 310-318. ISSN 0038092X

Al-Waked, R. and Nasif, M.S. and Morrison, G. and Behnia, M. (2015) CFD simulation of air to air enthalpy heat exchanger: Variable membrane moisture resistance. Applied Thermal Engineering, 84. pp. 301-309. ISSN 13594311

Aldabbagh, G. and Hasbullah, H. and Verma, K. and Bamasak, O. (2015) Space-efficient and accurate forwarding loop detection method using Bloom-filter for fast and reliable internet routing. Journal of Theoretical and Applied Information Technology, 79 (3). pp. 456-475. ISSN 19928645

Aleem, W. and Mellon, N. and Sufian, S. and Mutalib, M.I.A. and Subbarao, D. (2015) A Model for the Estimation of Surface Tension of Pure Hydrocarbon Liquids. Petroleum Science and Technology, 33 (23-24). pp. 1908-1915. ISSN 10916466

Aleem, W. and Mellon, N. and Sufian, S. and Mutalib, M.I.A. and Subbarao, D. (2015) A Model for the Estimation of Viscosity of Pure Hydrocarbon Liquids. Petroleum Science and Technology, 33 (21-22). pp. 1815-1821. ISSN 10916466

Ali, A. and Farooq, M.U. and Naz, M.Y. and Qayyum, A. and Khan, Y. and Ghaffar, A. and Shukrullah, S. (2015) Symmetric tungsten triple probe diagnostic for time resolved measurements in plasma discharge. International Journal of Applied Electromagnetics and Mechanics, 49 (2). pp. 289-298. ISSN 13835416

Ali, A.S.O. and Asirvadam, V.S. and Malik, A.S. and Eltoukhy, M.M. and Aziz, A. (2015) Age-Invariant Face Recognition Using Triangle Geometric Features. International Journal of Pattern Recognition and Artificial Intelligence, 29 (5). ISSN 02180014

Ali, A.S.O. and Sagayan, V. and Saeed, A.M. and Ameen, H. and Aziz, A. (2015) Age-invariant face recognition system using combined shape and texture features. IET Biometrics, 4 (2). pp. 98-115. ISSN 20474938

Ali, E.M. and Yahaya, N.Z. and Perumal, N. and Zakariya, M.A. (2015) Design and development of harvester RECTENNA at GSM band for battery charging applications. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10206-10212. ISSN 18196608

Ali, S.M. and Zakariya, M.A. and Baharudin, Z. and Adz, J.J. and Jilani, M.T. and Ain, M.F. and Ahmad, Z.A. (2015) Parametric study of Cylindrical Dielectric Resonator Antenna (CDRA) feeder with symmetric parabolic reflector. Research Journal of Applied Sciences, Engineering and Technology, 10 (6). pp. 607-617. ISSN 20407459

Ali, Z. and Muhammad, G. and Alsulaiman, M. and Elamvazuthi, I. and Al-Mutib, K. (2015) Oriented and interpolated local features for speech recognition of vocal fold disordered patients. International Journal of Computers and their Applications, 22 (1). pp. 3-11. ISSN 10765204

Aljuboori, A.H.R. and Idris, A. and Al-joubory, H.H.R. and Uemura, Y. and Ibn Abubakar, B.S.U. (2015) Flocculation behavior and mechanism of bioflocculant produced by Aspergillus flavus. Journal of Environmental Management, 150. pp. 466-471. ISSN 03014797

Altaf, K. and Rani, A.M.B.A. (2015) Numerical study of profiled conformal cooling channels for cooling time reduction in injection mould tools. International Journal of Engineering Systems Modelling and Simulation, 7 (4). pp. 230-237. ISSN 17559758

Amin, H.U. and Malik, A.S. and Ahmad, R.F. and Badruddin, N. and Kamel, N. and Hussain, M. and Chooi, W.-T. (2015) Feature extraction and classification for EEG signals using wavelet transform and machine learning techniques. Australasian Physical and Engineering Sciences in Medicine, 38 (1). pp. 139-149. ISSN 01589938

Amin, H.U. and Malik, A.S. and Kamel, N. and Chooi, W.-T. and Hussain, M. (2015) P300 correlates with learning & memory abilities and fluid intelligence. Journal of NeuroEngineering and Rehabilitation, 12 (1). ISSN 17430003

Amin, M.M. and Yusup, S. (2015) Transesterification via direct-ultrasonic irradiation of rubber seed oil with waste materials based heterogeneous catalyst. Chemical Engineering Transactions, 45. pp. 1267-1272. ISSN 22839216

Aminu, M. and Matori, A.-N. and Yusof, K.W. and Malakahmad, A. and Zainol, R.B. (2015) A GIS-based water quality model for sustainable tourism planning of Bertam River in Cameron Highlands, Malaysia. Environmental Earth Sciences, 73 (10). pp. 6525-6537. ISSN 18666280

Ani, Z.C. and Sarlan, A. (2015) Validating reusability of software projects using object-oriented design metrics. Lecture Notes in Electrical Engineering, 339. pp. 845-850. ISSN 18761100

Aniza, N. and Hassan, S. and Nor, M.F.M. and Kee, K.E. and Aklilu, T. (2015) Investigation of thermal degradation of poultry processing dewatered sludge using thermogravimetric analysis method. Jurnal Teknologi, 76 (5). pp. 7-10. ISSN 01279696

Ansari, S. and Gonzalez, J.P. and Otero, P. and Ansari, A. (2015) Analysis of MAC Strategies for Underwater Applications. Wireless Personal Communications, 85 (2). pp. 359-376. ISSN 09296212

Araki, S. and Wakabayashi, R. and Moniruzzaman, M. and Kamiya, N. and Goto, M. (2015) Ionic liquid-mediated transcutaneous protein delivery with solid-in-oil nanodispersions. MedChemComm, 6 (12). pp. 2124-2128. ISSN 20402503

Ariffin, M.M. and Ahmad, W.F.W. and Sulaiman, S. (2015) Guideline for designing an effective serious game by using cultural-based game design model. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9429. pp. 111-118. ISSN 03029743

Armi, N. and Yusoff, M.Z. and Saad, N.M. (2015) Decentralized multiuser cooperative spectrum sensing in cognitive radio system. International Journal on Electrical Engineering and Informatics, 7 (3). pp. 418-428. ISSN 20856830

Arshad, N.I. and Mehat, M. and Ariff, M.I.M. (2015) Electronic content management systems support highly integrated business processes. International Journal of Business Information Systems, 20 (3). pp. 362-381. ISSN 17460972

Aruchunan, E. and Muthuvalu, M.S. and Sulaiman, J. (2015) Quarter-sweep iteration concept on conjugate gradient normal residual method via second order quadrature - Finite difference schemes for solving Fredholm integro-differential equations. Sains Malaysiana, 44 (1). pp. 139-146. ISSN 01266039

Asadpour, R. and Sapari, N.B. and Isa, M.H. and Kakooei, S. and Orji, K.U. (2015) Acetylation of corn silk and its application for oil sorption. Fibers and Polymers, 16 (9). pp. 1830-1835. ISSN 12299197

Asif, A. and Man, Z. and Mohd Azizli, K.A. and Nuruddin, M.F. and Ismail, L. (2015) The effect of Si/Al ratio and sodium silicate on the mechanical properties of fly ash based geopolymer for coating. Materials Science Forum, 803. pp. 355-361. ISSN 02555476

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Prediction of RC beams failure load using non-linear finite element analysis. International Journal of Applied Engineering Research, 10 (22). pp. 42974-42980. ISSN 09734562

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Root cause of reinforced concrete dapped-end beams failure. International Journal of Applied Engineering Research, 10 (22). pp. 42927-42933. ISSN 09734562

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Shear Failure of RC Dapped-End Beams. Advances in Materials Science and Engineering, 2015. ISSN 16878434

Awang, A. and Agarwal, S. (2015) Data Aggregation Using Dynamic Selection of Aggregation Points Based on RSSI for Wireless Sensor Networks. Wireless Personal Communications, 80 (2). pp. 611-633. ISSN 09296212

Awang, M. and Raza, S.K. and Yahaya, M.S.A. (2015) Microstructure and hardness investigation of different welding passes in weld zones. Materialwissenschaft und Werkstofftechnik, 46 (4-5). pp. 492-497. ISSN 09335137

Ayodele, O.B. and Farouk, H.U. and Mohammed, J. and Uemura, Y. and Daud, W.M.A.W. (2015) Effect of precursor acidity on zeolite supported Pd catalyst properties and hydrodeoxygenation activity for the production of biofuel. Journal of Molecular Catalysis A: Chemical, 400. pp. 179-186. ISSN 13811169

Ayodele, O.B. and Farouk, H.U. and Mohammed, J. and Uemura, Y. and Daud, W.M.A.W. (2015) Hydrodeoxygenation of oleic acid into n- and iso-paraffin biofuel using zeolite supported fluoro-oxalate modified molybdenum catalyst: Kinetics study. Journal of the Taiwan Institute of Chemical Engineers, 50. pp. 142-152. ISSN 18761070

Ayoub, M. and Inayat, A. and Rashid, U. and Ullah, S. and Lal, B. (2015) Synthesis of stable lithium modified mesoporous catalyst for oligomerization of biodisel-drive glycerol to diglycerol. Chemical Engineering Transactions, 45. pp. 1291-1296. ISSN 22839216

Ayoub, M.A. and Shabib-Asl, A. and AbdellahiZein, A.M. and Elraies, K.A. and MohdSaaid, I.B. (2015) Recovery optimization of an oil reservoir by water flooding under different scenarios; a simulation approach. Research Journal of Applied Sciences, Engineering and Technology, 10 (4). pp. 357-372. ISSN 20407459

Azahari, I.N.N.A. and Ahmad, W.F.W. and Hashim, A.S. (2015) Preliminary study on social learning using mobile technology among children with autism. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9429. pp. 420-431. ISSN 03029743

Azarpour, A. and Nejad Ghaffar Borhani, T. and Wan Alwi, S.R. and Abdul Manan, Z. and Madooli Behbehani, M. (2015) Prediction of Pd/C Catalyst Deactivation Rate and Assessment of Optimal Operating Conditions of Industrial Hydropurification Process. Industrial and Engineering Chemistry Research, 54 (28). pp. 7067-7082. ISSN 08885885

B

Babiker, A. and Faye, I. and Prehn, K. and Malik, A. (2015) Machine learning to differentiate between positive and negative emotions using pupil diameter. Frontiers in Psychology, 6 (DEC). ISSN 16641078

Baharudin, Z. and Rehman, M.U.Z. and Zakariya, M.A. and Khir, M.H.M. and Khan, M.T. and Adz, J.J. (2015) Bowtie shaped substrate integrated waveguide bandpass filter. Lecture Notes in Electrical Engineering, 315. pp. 365-373. ISSN 18761100

Baheta, A.T. and Emad, M.A. (2015) Parametric analysis of carbon dioxide transcritical and supercritical power cycles using low grade heat source. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10169-10173. ISSN 18196608

Bahloul, M.R. and Yusoff, M.Z. and Saad, M.N.B.M. (2015) Robust and reliable modulation classification for MIMO systems. Applied Mathematics and Information Sciences, 9 (5). pp. 2513-2519. ISSN 19350090

Bahloul, M.R. and Yusoff, M.Z. and Saad, M.N.M. (2015) Efficient and low complexity modulation classification algorithm for MIMO systems. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 58-64. ISSN 20407459

Bajeh, A.O. and Basri, S. and Jung, L.T. (2015) An empirical validation of coupling and cohesion metrics as testability indicators. Lecture Notes in Electrical Engineering, 339. pp. 915-922. ISSN 18761100

Bakar, Z.A. and Abdullah, M.R.T.L. (2015) Importance of correct pronunciation in spoken english: Dimension of second language learners' perspective. Pertanika Journal of Social Sciences and Humanities, 23 (August). pp. 143-158. ISSN 01287702

Bakhsh, S.T. and Aman Sheikh, M. and Alghamdi, R. (2015) Self-Schedule and Self-Distributive MAC Scheduling Algorithms for Next-Generation Sensor Networks. International Journal of Distributed Sensor Networks, 2015. ISSN 15501329

Balogun, A.-L. and Matori, A.-N. and Hamid-Mosaku, A.I. (2015) A fuzzy multi-criteria decision support system for evaluating subsea oil pipeline routing criteria in East Malaysia. Environmental Earth Sciences, 74 (6). pp. 4875-4884. ISSN 18666280

Ban, Z.H. and Lau, K.K. and Shariff, A.M. (2015) Prediction of the bubble nucleation rate in a quasi-stable cavitating nozzle using 2D computational fluid dynamics and enhanced classical nucleation theory. Engineering Applications of Computational Fluid Mechanics, 9 (1). pp. 247-258. ISSN 19942060

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2015) Hydrogen production from water photosplitting using Cu/TiO2 nanoparticles: Effect of hydrolysis rate and reaction medium. International Journal of Hydrogen Energy, 40 (18). pp. 6021-6037. ISSN 03603199

Basrawi, F. and Ibrahim, T.K. and Lee, G.C. and Habib, K. and Ibrahim, H. (2015) Effect of Solar Fraction on the Economic and Environmental Performance of Solar Air-Conditioning by Adsorption Chiller in a Tropical Region. Journal of Solar Energy Engineering, Transactions of the ASME, 137 (6). ISSN 01996231

Bayuaji, R. and Nuruddin, M.F. and Francis, S. and Ekaputri, J.J. and Triwulan and Junaedi, S. and Fansuri, H. (2015) Mechanical properties of MIRHA-fly ash geopolymer concrete. Materials Science Forum, 803. pp. 49-57. ISSN 02555476

Ben Ghanem, O. and Mutalib, M.I.A. and Léveîque, J.-M. and Gonfa, G. and Kait, C.F. and El-Harbawi, M. (2015) Studies on the Physicochemical Properties of Ionic Liquids Based On 1-Octyl-3-methylimidazolium Amino Acids. Journal of Chemical and Engineering Data, 60 (6). pp. 1756-1763. ISSN 00219568

Ben-Awuah, J. and Eswaran, P. (2015) Effect of bioturbation on reservoir rock quality of sandstones: A case from the Baram Delta, offshore Sarawak, Malaysia. Petroleum Exploration and Development, 42 (2). pp. 223-231. ISSN 18763804

Besrour, S. and Rahim, L.B.A. and Dominic, P.D.D. (2015) Exploratory study to assess and evaluate requirement specification techniques using analysis determination requirements framework. Research Journal of Applied Sciences, Engineering and Technology, 9 (3). pp. 165-171. ISSN 20407459

Bhattacharjee, S. and Rahim, L.B.A. and Aziz, I.B.A. (2015) Enhancement of confidentiality and integrity during big data transmission using a hybrid technique. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 18029-18038. ISSN 18196608

Bhattacharjee, S. and Rahim, L.B.A. and Aziz, I.B.A. (2015) A lossless compression technique to increase robustness in big data transmission system. International Journal of Advances in Soft Computing and its Applications, 7 (3). pp. 126-145. ISSN 20748523

Bhattacharyya, E. and Zainal, A.Z. (2015) What do students and engineers have to say about communicative competence in technical oral presentations? Pertanika Journal of Social Sciences and Humanities, 23 (August). pp. 123-142. ISSN 01287702

Bokhari, A. and Chuah, L.F. and Yusup, S. and Ahmad, J. and Shamsuddin, M.R. and Teng, M.K. (2015) Microwave-assisted methyl esters synthesis of Kapok (Ceiba pentandra) seed oil: Parametric and optimization study. Biofuel Research Journal, 2 (3). pp. 281-287. ISSN 22928782

Borhani, T.N.G. and Azarpour, A. and Akbari, V. and Wan Alwi, S.R. and Manan, Z.A. (2015) CO2 capture with potassium carbonate solutions: A state-of-the-art review. International Journal of Greenhouse Gas Control, 41. pp. 142-162. ISSN 17505836

Bou-Rabee, M.A. and Sulaiman, S.A. (2015) On seasonal variation of solar irradiation in Kuwait. International Journal of Renewable Energy Research, 5 (2). pp. 367-372. ISSN 13090127

Bou-Rabee, M.A. and Sulaiman, S.A. and Choe, G. and Han, D. and Saeed, T. and Marafie, S. (2015) Characteristics of solar energy radiation on typical summer and winter days in Kuwait. International Journal of Automotive and Mechanical Engineering, 12 (1). pp. 2944-2953. ISSN 22298649

Brahim-Belhaouari, S. and Hassan, M. and Walter, N. and Bermak, A. (2015) Advanced statistical metrics for gas identification system with quantification feedback. IEEE Sensors Journal, 15 (3). pp. 1705-1715. ISSN 1530437X

Bt Yaser, N.M. and Chemat, F. and Rashid, T. and Thanabalan, M. (2015) Degradation of aqueous diethanolamine (DEA) solutions using UV/H2O2 process. Chemical Engineering Transactions, 43. pp. 2263-2268. ISSN 22839216

C

Chai, Y.H. and Yusup, S. and Chok, V.S. (2015) A review on nanoparticle addition in base fluid for improvement of biodegradable ester-based drilling fluid properties. Chemical Engineering Transactions, 45. pp. 1447-1452. ISSN 22839216

Chakraborty, A. and Ahmad, T. and Abdullah, B.B. and Bhattacharjee, S. (2015) Process engineering studies on synthesis of gold nanoparticles by Turkevitch method. Chemical Engineering Transactions, 45. pp. 1939-1944. ISSN 22839216

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Abdullah, W.A.K.W. (2015) Effects of cooling regime on the formation of voids in statically cooled waxy crude oil. International Journal of Multiphase Flow, 77. pp. 187-195. ISSN 03019322

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Kamil Wan Abdullah, W.A. (2015) Study on influence of flow rates on voids in waxy crude oil subjected to dynamic and static cooling. Journal of Mechanical Engineering and Sciences, 9. pp. 1587-1594. ISSN 22894659

Chan, Y.H. and Yusup, S. and Quitain, A.T. and Tan, R.R. and Sasaki, M. and Lam, H.L. and Uemura, Y. (2015) Effect of process parameters on hydrothermal liquefaction of oil palm biomass for bio-oil production and its life cycle assessment. Energy Conversion and Management, 104. pp. 180-188. ISSN 01968904

Chandio, Z.A. and Ramasamy, M. and Mukhtar, H.B. (2015) Temperature effects on solubility of asphaltenes in crude oils. Chemical Engineering Research and Design, 94. pp. 573-583. ISSN 02638762

Che Mansor, M.F. and Cheng, E.M. and Zakaria, Z. and Abdul Malek, M.F. and Chik, A. and Rojan, M.A. and Zahid, L. and Abu Bakar, S. and Mohd Nasir, N.F. and Khor, S.F. and Beh, H.G. (2015) Microwave absorption analysis on recycled glass doped with Ferum (II, III) Oxide (Fe2O3). International Journal of Mechanical and Mechatronics Engineering, 15 (5). pp. 1-13. ISSN 22272771

Cheab, S. and Wong, P.W. (2015) Design and synthesis of quasi dual-mode, elliptic coaxial filter. Radioengineering, 24 (3). pp. 795-799. ISSN 12102512

Cheab, S. and Wong, P.W. and Chew, X.Y. (2015) Parallel Connected Dual-Mode Filter. IEEE Microwave and Wireless Components Letters, 25 (9). pp. 582-584. ISSN 15311309

Chemat, F. and You, H.J. and Muthukumar, K. and Murugesan, T. (2015) Effect of l-arginine on the physical properties of choline chloride and glycerol based deep eutectic solvents. Journal of Molecular Liquids, 212. pp. 605-611. ISSN 01677322

Chin, S.C. and Shafiq, N. and Nuruddin, M.F. (2015) FRP as strengthening material for Reinforced Concrete beams with openings � A review. KSCE Journal of Civil Engineering, 19 (1). pp. 213-219. ISSN 12267988

Chuah, L.F. and Aziz, A.R.A. and Yusup, S. and Bokhari, A. and Klemeš, J.J. and Abdullah, M.Z. (2015) Performance and emission of diesel engine fuelled by waste cooking oil methyl ester derived from palm olein using hydrodynamic cavitation. Clean Technologies and Environmental Policy, 17 (8). pp. 2229-2241. ISSN 1618954X

Chuah, L.F. and Yusup, S. and Abd Aziz, A.R. and Bokhari, A. and Klemeš, J.J. and Abdullah, M.Z. (2015) Intensification of biodiesel synthesis from waste cooking oil (Palm Olein) in a Hydrodynamic Cavitation Reactor: Effect of operating parameters on methyl ester conversion. Chemical Engineering and Processing: Process Intensification, 95. pp. 235-240. ISSN 02552701

Chuan, N.K. and Sivaji, A. and Ahmad, W.F.W. (2015) Usability heuristics for heuristic evaluation of gestural interaction in HCI. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9186. pp. 138-148. ISSN 03029743

Chung, K.W. and Sum, C.W. and Rahman, Abd.H.A. (2015) Stratigraphic succession and depositional framework of the Sandakan formation, Sabah. Sains Malaysiana, 44 (7). pp. 931-940. ISSN 01266039

Cárdenas-Barrón, L.E. and Treviño-Garza, G. and Taleizadeh, A.A. and Vasant, P. (2015) Determining replenishment lot size and shipment policy for an EPQ inventory model with delivery and rework. Mathematical Problems in Engineering, 2015. ISSN 1024123X

D

Dahalan, A.A. and Muthuvalu, M.S. and Sulaiman, J. (2015) Numerical solution for fuzzy heat equation using hsage method. UPB Scientific Bulletin, Series A: Applied Mathematics and Physics, 77 (2). pp. 251-260. ISSN 12237027

Dan-Mallam, Y. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2015) Mechanical properties of short and continuous kenaf/PET fibre reinforced polyoxymethylene composite. Advanced Composites Letters, 24 (4). pp. 81-91. ISSN 2633366X

Dashti, N.G. and Malakahmad, A. (2015) Approximation of polycyclic aromatic hydrocarbons (PAHs) presence in kinta river and its tributaries. Advances in Environmental Biology, 9 (6). pp. 21-27. ISSN 19950756

Dass, S.C. and Lim, C.Y. and Maiti, T. and Zhang, Z. (2015) Clustering curves based on change point analysis : a nonparametric Bayesian approach. Statistica Sinica, 25 (2). pp. 677-708. ISSN 10170405

Dennis, J.-O. and Ahmed, A.-Y. and Khir, M.-H. (2015) Fabrication and characterization of a CMOS-MEMS humidity sensor. Sensors (Switzerland), 15 (7). pp. 16674-16687. ISSN 14248220

Dennis, J.O. and Ahmad, F. and Md Khir, M.B. and Hamid, N.H.B. (2015) Optical characterization of lorentz force based CMOS-MEMS magnetic field sensor. Sensors (Switzerland), 15 (8). pp. 18256-18269. ISSN 14248220

Dennis, J.O. and Ahmed, A.Y. and Md. Khir, M.H. and Rabih, A.A.S. (2015) Modelling and simulation of the effect of air damping on the frequency and quality factor of a CMOS-MEMS resonator. Applied Mathematics and Information Sciences, 9 (2). pp. 729-737. ISSN 19350090

Dennis, J.O. and Rabih, A.A.S. and Md Khir, M.H. and Abdullah, M.A. and Ahmed, M.G.A. (2015) Review on exhaled hydrogen peroxide as a potential biomarker for diagnosis of inflammatory lung diseases. Journal of Biomimetics, Biomaterials and Biomedical Engineering, 22. pp. 77-87. ISSN 22969837

Devi Wilfred, C. and Salleh, M.Z.M. and Mutalib, M.I.B.M. (2015) Oxidative Desulfurization of Fuels using 1-Butyl-6-Methyl-Quinolinium Dicyanamide. Separation Science and Technology (Philadelphia), 50 (2). pp. 159-163. ISSN 01496395

Dewangan, S. and Gangopadhyay, S. and Biswas, C.K. (2015) Study of surface integrity and dimensional accuracy in EDM using Fuzzy TOPSIS and sensitivity analysis. Measurement: Journal of the International Measurement Confederation, 63. pp. 364-376. ISSN 02632241

Dominic, P.D.D. and Arshad, N.I. and Sarlan, A. (2015) Editorial. International Journal of Business Information Systems, 20 (3). pp. 271-273. ISSN 17460972

Doraiselvan, K. and Yusup, S. and Wai, C.K. and Muda, N.S. (2015) Optimization studies on catalytic pyrolysis of empty fruit bunch (EFB) using L9 Taguchi Orthogonal Array. Chemical Engineering Transactions, 45. pp. 1639-1644. ISSN 22839216

Dutta, A. and Banerjee, P. and Sarkar, D. and Bhattacharjee, S. and Chakrabarti, S. (2015) Degradation of Trypan Blue in wastewater by sunlight-assisted modified photo-Fenton reaction. Desalination and Water Treatment, 56 (6). pp. 1498-1506. ISSN 19443994

E

Ee, L.K. and Zamin, N. and Aziz, I.A. and Haron, N.S. and Mehat, M. and Ismail, N.N. (2015) Bedrunn3R: An intelligent running alarm clock. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17890-17898. ISSN 18196608

Eisakhani, M. and Abdullah, M.P. and Karim, O.A. and Malakahmad, A. (2015) Best management practices for water quality improvement of Bertam River, Malaysia. International Journal of Applied Engineering Research, 10 (2). pp. 3923-3935. ISSN 09734562

El-Kammar, M.M. and Abuassy, E.M.A. and Wali, A.M.A. and Abu El-Ezz, A.R. (2015) The possible origin of hydrocarbon generation sourced from an evaporative environment: A comparative analog of recent and older environments. Petroleum Science and Technology, 33 (1). pp. 51-61. ISSN 10916466

Elkhalifah, A.E.I. and Azmi Bustam, M. and Shariff, A.M. and Murugesan, T. (2015) Selective adsorption of CO2 on a regenerable amine-bentonite hybrid adsorbent. Applied Clay Science, 107. pp. 213-219. ISSN 01691317

Elraies, K.A. and Kalwar, S.A. and Ayoub, M.A. and Belhaj, H.A. (2015) Experimental investigation of alkali-surfactant-polymer flooding forcarbonate reservoirs. International Journal of Applied Engineering Research, 10 (11). pp. 28401-28410. ISSN 09734562

Endut, M.N.A.-A. and Nur Arfah, A.S. (2015) The islamic epistemological element of Al-Yaqin in critical thinking. Pertanika Journal of Social Sciences and Humanities, 23 (August). pp. 91-102. ISSN 01287702

Ezechi, E.H. and Hasnain Isa, M. and Kutty, S.R.B.M. and Ahmed, Z. (2015) Electrochemical removal of boron from produced water and recovery. Journal of Environmental Chemical Engineering, 3 (3). pp. 1962-1973. ISSN 22133437

Ezechi, E.H. and Kutty, S.R.B.M. and Isa, M.H. and Malakahmad, A. and Ibrahim, S.U. (2015) Chemical oxygen demand removal from wastewater by integrated bioreactor. Journal of Environmental Science and Technology, 8 (5). pp. 238-243. ISSN 19947887

Ezechi, E.H. and Kutty, S.R.B.M. and Isa, M.H. and Malakahmad, A. and Ude, C.M. and Menyechi, E.J. and Olisa, E. (2015) Determination of decay coefficient of biomass through endogenous respiration. Research Journal of Microbiology, 10 (8). pp. 355-365. ISSN 18164935

Ezechi, E.H. and Kutty, S.R.B.M. and Malakahmad, A. and Isa, M.H. (2015) Characterization and optimization of effluent dye removal using a new low cost adsorbent: Equilibrium, kinetics and thermodynamic study. Process Safety and Environmental Protection, 98. pp. 16-32. ISSN 09575820

F

Farooq, M. and Ramli, A. (2015) Biodiesel production from low FFA waste cooking oil using heterogeneous catalyst derived from chicken bones. Renewable Energy, 76. pp. 362-368. ISSN 09601481

Farooq, M.U. and Ali, A. and Qayyum, A. and Naz, M.Y. and Khan, Y. and Shukrullah, S. and Ghaffar, C.A. (2015) Time function triple Langmuir probe measurements in low frequency pulsed DC discharge plasma. High Energy Chemistry, 49 (4). pp. 286-293. ISSN 00181439

Firmansyah and Aziz, A.R.A. (2015) Investigation of auto-ignition of octane-CNG mixture in HCCI engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2235-2242. ISSN 22298649

Fuddoly, A. and Jaafar, J. and Zamin, N. (2015) News classification with human annotators: A case study. Jurnal Teknologi, 74 (10). pp. 21-28. ISSN 01279696

Fujita, M. and Lévêque, J.-M. and Komatsu, N. and Kimura, T. (2015) Sono-bromination of aromatic compounds based on the ultrasonic advanced oxidation processes. Ultrasonics Sonochemistry, 27. pp. 247-251. ISSN 13504177

G

Ganesan, T. and Awang, M. (2015) Large eddy simulation (LES) for steady-state turbulent flow prediction. Advanced Structured Materials, 44. pp. 17-32. ISSN 18698433

Ganesan, T. and Elamvazuthi, I. and Vasant, P. (2015) Multiobjective design optimization of a nano-CMOS voltage-controlled oscillator using game theoretic-differential evolution. Applied Soft Computing Journal, 32. pp. 293-299. ISSN 15684946

Ganesan, T. and Elamvazuthi, I. and Vasant, P. and Shaari, K.Z.K. (2015) Multiobjective optimization of bioactive compound extraction process via evolutionary strategies. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9012. pp. 13-21. ISSN 03029743

Gardezi, S.J.S. and Faye, I. (2015) Fusion of completed local binary pattern features with curvelet features for mammogram classification. Applied Mathematics and Information Sciences, 9 (6). pp. 3037-3048. ISSN 19350090

Gardezi, S.S.S. and Shafiq, N. and Abdullah, N.A.W. and Khamidi, M.F. and Farhan, S.A. (2015) Minimization of embodied carbon footprint from housing sector of Malaysia. Chemical Engineering Transactions, 45. pp. 1927-1932. ISSN 22839216

Gasim, H. and Megat, A.R.M.M.A. and Shamsul, R.M.K. (2015) Treatment of petroleum refinery wastewater using extended aeration activated sludge. International Journal of Engineering Research in Africa, 13. pp. 1-7. ISSN 16633571

Getu, M. and Mahadzir, S. and Samyudia, Y. and Khan, M.S. and Bahadori, A. and Lee, M. (2015) Risk-based optimization for representative natural gas liquid (NGL) recovery processes by considering uncertainty from the plant inlet. Journal of Natural Gas Science and Engineering, 27. pp. 42-54. ISSN 18755100

Ghanem, O.B. and Mutalib, M. and El-Harbawi, M. and Gonfa, G. and Kait, C.F. and Alitheen, N.B.M. and Lévêque, J.-M. (2015) Effect of imidazolium-based ionic liquids on bacterial growth inhibition investigated via experimental and QSAR modelling studies. Journal of Hazardous Materials, 297. pp. 198-206. ISSN 03043894

Ghanem, O.B. and Papaiconomou, N. and Abdul Mutalib, M.I. and Viboud, S. and El-Harbawi, M. and Uemura, Y. and Gonfa, G. and Azmi Bustam, M. and Lévêque, J.-M. (2015) Thermophysical properties and acute toxicity towards green algae and Vibrio fischeri of amino acid-based ionic liquids. Journal of Molecular Liquids, 212. pp. 352-359. ISSN 01677322

Ghazali, Z. and Shamim, A. (2015) Managing plant turnaround maintenance in Malaysian process-based industries: A study on centralisation, formalisation and plant technology. International Journal of Applied Management Science, 7 (1). pp. 59-80. ISSN 17558913

Gholami, Z. and Abdullah, A.Z. and Lee, K.T. (2015) Catalytic Etherification of Glycerol to Diglycerol Over Heterogeneous Calcium-Based Mixed-Oxide Catalyst: Reusability and Stability. Chemical Engineering Communications, 202 (10). pp. 1397-1405. ISSN 00986445

Gilani, S.F.-H. and Gilani, S.I.-H. and Baharudin, Z. and Ibrahim, R. (2015) Development of energy harvesting system using rotation mechanism of a revolving door. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10159-10163. ISSN 18196608

Gilassi, S. and Rahmanian, N. (2015) Mathematical modelling and numerical simulation of CO2/CH4 separation in a polymeric membrane. Applied Mathematical Modelling, 39 (21). pp. 6599-6611. ISSN 0307904X

Gillani, S.A. and Shah, P.A. and Qayyum, A. and Hasbullah, H.B. (2015) MAC layer challenges and proposed protocols for vehicular ad-hoc networks. Advances in Intelligent Systems and Computing, 306. pp. 3-13. ISSN 21945357

Gitan, A.A. and Abdulmalek, S.H. and Dihrab, S.S. (2015) Tracking collector consideration of tilted collector solar updraft tower power plant under Malaysia climate conditions. Energy, 93. pp. 1467-1477. ISSN 03605442

Gonfa, G. and Bustam, M.A. and Muhammad, N. and Khan, A.S. (2015) Evaluation of Thermophysical Properties of Functionalized Imidazolium Thiocyanate Based Ionic Liquids. Industrial and Engineering Chemistry Research, 54 (49). pp. 12428-12437. ISSN 08885885

Gonfa, G. and Bustam, M.A. and Muhammad, N. and Ullah, S. (2015) Density and excess molar volume of binary mixture of thiocyanate-based ionic liquids and methanol at temperatures 293.15-323.15 K. Journal of Molecular Liquids, 211. pp. 734-741. ISSN 01677322

Gonfa, G. and Bustam, M.A. and Sharif, A.M. and Mohamad, N. and Ullah, S. (2015) Tuning ionic liquids for natural gas dehydration using COSMO-RS methodology. Journal of Natural Gas Science and Engineering, 27. pp. 1141-1148. ISSN 18755100

Gul, T. and Islam, S. and Shah, R.A. and Khan, I. and Dennis, L.C.C. (2015) Temperature dependent viscosity of a third order thin film fluid layer on a lubricating vertical belt. Abstract and Applied Analysis, 2015. ISSN 10853375

Gupta, R. and Elamvazuthi, I. and Dass, S.C. and George, J. and Rozalli, F.I. and Faye, I. and Vasant, P. (2015) Adaptive contrast enhancement of supraspinatus (SSP) tendon ultrasound images. Journal of Medical Imaging and Health Informatics, 5 (3). pp. 581-590. ISSN 21567018

H

Habte, A.D. and Onur, M. and Saaid, I.M.B. (2015) Pressure transient behavior of immiscible water alternating gas (IWAG) injection well with and without relative permeability hysteresis and capillary pressure effects. Journal of Petroleum Science and Engineering, 127. pp. 169-178. ISSN 09204105

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2015) Investigation of deposit formation in direct-injection spark-ignition engine powered on syngas. International Journal of Automotive Technology, 16 (3). pp. 479-485. ISSN 12299138

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2015) Methane enrichment of syngas (H2/CO) in a spark-ignition directinjection engine: Combustion, performance and emissions comparison with syngas and Compressed Natural Gas. Energy, 90. pp. 2006-2015. ISSN 03605442

Hakro, M.R. and Harahap, I.S.H. (2015) Flume experiments for investigation of rainfall-induced slope failure. International Journal of Engineering Research in Africa, 16. pp. 49-56. ISSN 16633571

Haleem, A.A. and Hashim, H. and Varbanov, P.S. and Yong, J.Y. and Klemeš, J.J. and Yusup, S. (2015) Case study: Optimisation of Federal Land Development Authority Jengka supply chain management using P-graph approach. Chemical Engineering Transactions, 45. pp. 1375-1380. ISSN 22839216

Halim, H.N.A. and Shariff, A.M. and Bustam, M.A. (2015) High pressure CO2 absorption from natural gas using piperazine promoted 2-amino-2-methyl-1-propanol in a packed absorption column. Separation and Purification Technology, 152. pp. 87-93. ISSN 13835866

Hamizol, M.S. and Megat-Yusoff, P.S.M. (2015) Tensile strength of single continuous fiber extracted from mengkuang leaves. Jurnal Teknologi, 76 (3). pp. 101-107. ISSN 01279696

Hamzah, H.I. and Jung, L.T. and Mutalib, A.A. (2015) Prevention of digital music file duplication. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 427-435. ISSN 18196608

Hani, A.F.M. and Kumar, D. and Malik, A.S. and Ahmad, R.M.K.R. and Razak, R. and Kiflie, A. (2015) Non-invasive and in vivo assessment of osteoarthritic articular cartilage: A review on MRI investigations. Rheumatology International, 35 (1). ISSN 01728172

Hani, A.F.M. and Kumar, D. and Malik, A.S. and Walter, N. and Razak, R. and Kiflie, A. (2015) Multinuclear MR and Multilevel Data Processing. An Insight into Morphologic Assessment of InVivo Knee Articular Cartilage. Academic Radiology, 22 (1). pp. 93-104. ISSN 10766332

Hani, A.F.M. and Paputungan, I.V. and Hassan, M.F. (2015) Renegotiation in service level agreement management for a cloud-based system. ACM Computing Surveys, 47 (3). ISSN 03600300

Hani, A.M. and Feng, Y.X. and Tang, T.B. and Kiguchi, M. (2015) The effect of working memory load on prefrontal cortex activation: An optical topography study. ARPN Journal of Engineering and Applied Sciences, 10 (20). pp. 9846-9852. ISSN 18196608

Hanita, D. and Nurul Fauzana, I.G. and Nursyarizal, M.N. and Taib, I. (2015) A zigbee-based continuous online vital sign monitoring system. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 391-395. ISSN 18196608

Harun, N.Y. and Afzal, M.T. (2015) Chemical and mechanical properties of pellets made from agricultural and woody biomass blends. Transactions of the ASABE, 58 (4). pp. 921-930. ISSN 21510032

Harun, N.Y. and Afzal, M.T. (2015) Combustion behavior and thermal analysis of agricultural and woody biomass blends. Advances in Environmental Biology, 9 (15). pp. 34-40. ISSN 19950756

Hasan, K.N.M. and Mohamad, A.S. (2015) Modeling and simulation of modal analysis-based technique on UTP distribution network for evaluating harmonic resonances. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10255-10263. ISSN 18196608

Hashim, A.S. and Ahmad, W.F.W. (2015) A study on usability of mobileschool system for secondary school: Role-based questionnaire method. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9429. pp. 393-404. ISSN 03029743

Hassan, K. and Abdullah, A. (2015) Modeling the economic impacts of oil production in sudan: An empirical analysis for productive sectors. Advanced Science Letters, 21 (6). pp. 2166-2168. ISSN 19366612

Hassan, M.A. and Malik, A.S. and Nicolas, W. and Faye, I. (2015) Adaptive foreground extraction for crowd analytics surveillance on unconstrained environments. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9009. pp. 390-400. ISSN 03029743

Hassan, N.H. and Arshad, N.I. and Mustapha, E.E. (2015) A preliminary study on learning orientation, information technology infrastructure flexibility and agility. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17816-17823. ISSN 18196608

Hassan, R. and Marimuthu, M. and Johl, S.K. (2015) Ethnic diversity on boards and market performance: An empirical investigation in Malaysia. Advanced Science Letters, 21 (5). pp. 1099-1103. ISSN 19366612

Hassan, S. and Khosravi, A. and Jaafar, J. (2015) Examining performance of aggregation algorithms for neural network-based electricity demand forecasting. International Journal of Electrical Power and Energy Systems, 64. pp. 1098-1105. ISSN 01420615

Hassan, S. and Khosravi, A. and Jaafar, J. and Khanesar, M.A. (2015) Hybrid model for the training of interval type-2 fuzzy logic system. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9489. pp. 644-653. ISSN 03029743

Hegde, G. and Abdul Manaf, S.A. and Kumar, A. and Ali, G.A.M. and Chong, K.F. and Ngaini, Z. and Sharma, K.V. (2015) Biowaste Sago Bark Based Catalyst Free Carbon Nanospheres: Waste to Wealth Approach. ACS Sustainable Chemistry and Engineering, 3 (9). pp. 2247-2253. ISSN 21680485

Hendriana, D. and Firmansyah, T. and Setiawan, J.D. and Garinto, D. (2015) Design and optimization of low speed horizontal-axis wind turbine using OpenFOAM. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10264-10274. ISSN 18196608

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. (2015) B-spline collocation with domain decomposition method and its application for singularly perturbed convection-diffusion problems. Springer Series in Materials Science, 204. pp. 27-47. ISSN 0933033X

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. (2015) A new meshless local B-spline basis functions-FD method for two-dimensional heat conduction problems. International Journal of Numerical Methods for Heat and Fluid Flow, 25 (2). pp. 225-251. ISSN 09615539

Ho, W.S. and Khor, C.S. and Hashim, H. and Lim, J.S. and Ashina, S. and Herran, D.S. (2015) Optimal operation of a distributed energy generation system for a sustainable palm oil-based eco-community. Clean Technologies and Environmental Policy, 17 (6). pp. 1597-1617. ISSN 1618954X

Homid, A.H. and Abdel-Aty, A. and Abdel-Aty, M. and Badawi, A. and Obada, A.-S.F. (2015) Efficient realization of quantum search algorithm using quantum annealing processor with dissipation. Journal of the Optical Society of America B: Optical Physics, 32 (9). pp. 2025-2033. ISSN 07403224

Hong, B.Z. and Keong, L.K. and Shariff, A.M. (2015) Modelling of Bubble Growth in Supersaturated Solution using Computational Fluid Dynamics-Population Balance Model (CFD-PBM) Approach. Defect and Diffusion Forum, 362. pp. 200-208. ISSN 10120386

Hosna Talebian, S. and Mohd Tan, I. and Sagir, M. and Muhammad, M. (2015) Static and dynamic foam/oil interactions: Potential of CO2-philic surfactants as mobility control agents. Journal of Petroleum Science and Engineering, 135. pp. 118-126. ISSN 09204105

Hosseini, S.N. and Shuker, M.T. and Hosseini, Z. and Joao Tomocene, T. and Shabib-asl, A. and Sabet, M. (2015) The role of salinity and brine ions in interfacial tension reduction while using surfactant for enhanced oil recovery. Research Journal of Applied Sciences, Engineering and Technology, 9 (9). pp. 722-726. ISSN 20407459

Hussain, A. and Abolaban, F. and Khubaib, S.M. and Mubin, S. and Ahmed, I. (2015) Steady state and transient thermalhydraulic analysis of PHWR using COBRA-3C/RERTR. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 39. pp. 233-242. ISSN 22286187

I

Ibrahim, F. and Moniruzzaman, M. and Yusup, S. and Uemura, Y. (2015) Dissolution of cellulose with ionic liquid in pressurized cell. Journal of Molecular Liquids, 211. pp. 370-372. ISSN 01677322

Ibrahim, M.Y. and Ghazali, Z. and Ur Rahman, H. (2015) The best scenario of carbon capturing storage and utilization (CCSU) in Malaysia. Advances in Environmental Biology, 9 (7). pp. 28-35. ISSN 19950756

Ibrahim, N. and Wan Ahmad, W.F. and Shafie, A. (2015) Multimedia mobile learning application for children�s education: The development of MFolktales. Asian Social Science, 11 (24). pp. 203-215. ISSN 19112017

Imam, A.A. and Basri, S. and Ahmad, R. (2015) Data synchronization between mobile devices and server-side databases: A systematic literature review. Journal of Theoretical and Applied Information Technology, 81 (2). pp. 364-382. ISSN 19928645

Imam, A.A. and Basri, S.B. and Ahmad, R.B. (2015) Synchronization algorithm for remote heterogeneous database environment. Advances in Intelligent Systems and Computing, 349. pp. 55-65. ISSN 21945357

Imran, M. and Liew, M.S. and Nasif, M.S. (2015) Experimental studies on fire for offshore structures and its limitations: A review. Chemical Engineering Transactions, 45. pp. 1951-1956. ISSN 22839216

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2015) MINLP optimization for heat integration of bio-hydrogen production from palm waste. Journal of Engineering Science and Technology, 10 (Spec.i). pp. 50-60. ISSN 18234690

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. (2015) An on-line condition monitoring system for induction motors via instantaneous power analysis. Journal of Mechanical Science and Technology, 29 (4). pp. 1483-1492. ISSN 1738494X

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Hung, N.T. and Magzoub, M.A. (2015) Analysis of Bearing Surface Roughness Defects in Induction Motors. Journal of Failure Analysis and Prevention, 15 (5). pp. 730-736. ISSN 15477029

Irfan Khan, M. and Azizli, K. and Sufian, S. and Man, Z. (2015) Sodium silicate-free geopolymers as coating materials: Effects of Na/Al and water/solid ratios on adhesion strength. Ceramics International, 41 (2). pp. 2794-2805. ISSN 02728842

Irfan Khan, M. and Azizli, K. and Sufian, S. and Man, Z. and Khan, A.S. (2015) Simultaneous preparation of nano silica and iron oxide from palm oil fuel ash and thermokinetics of template removal. RSC Advances, 5 (27). pp. 20788-20799. ISSN 20462069

Irshad, K. and Habib, K. and Basrawi, F. and Thirumalaiswamy, N. and Saidur, R. and Saha, B.B. (2015) Thermal comfort study of a building equipped with thermoelectric air duct system for tropical climate. Applied Thermal Engineering, 91. pp. 1141-1155. ISSN 13594311

Irshad, K. and Habib, K. and Thirumalaiswamy, N. and Saha, B.B. (2015) Performance analysis of a thermoelectric air duct system for energy-efficient buildings. Energy, 91. pp. 1009-1017. ISSN 03605442

Irshad, S. and Rambli, D.R.A. (2015) User experience satisfaction of mobile-based AR advertising applications. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9429. pp. 432-442. ISSN 03029743

Isa, M.H. (2015) Simulated textile dye wastewater treatment by electrochemical oxidation: application of response surface methodology (RSM). Desalination and Water Treatment, 53 (8). pp. 2260-2265. ISSN 19443994

Ishmanov, F. and Malik, A.S. and Kim, S.W. and Begalov, B. (2015) Trust management system in wireless sensor networks: Design considerations and research challenges. Transactions on Emerging Telecommunications Technologies, 26 (2). pp. 107-130. ISSN 21615748

Islam, B. and Baharudin, Z. and Nallagownden, P. (2015) Effect of input variables selection on energy demand prediction based on intelligent hybrid neural networks. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10228-10235. ISSN 18196608

Ismail, A. and Awang, M. and Samsudin, S.H. (2015) The influence of process parameters on the temperature profile of friction stir welded aluminium alloy 6063-T6 pipe butt joint. Advanced Structured Materials, 70. pp. 243-249. ISSN 18698433

Ismail, A. and Lee, Y.C. and Mahmoud, Z.M.M. (2015) Puzzle of the folding potential on the nuclear halo reactions. International Journal of Modern Physics E, 24 (4). ISSN 02183013

Ismail, A. and Lee, Y.C. and Tammam, M. (2015) Elastic scattering analysis of p+40 Ca at incident energies from threshold to 48.4 MeV and nuclear matter radius. International Journal of Modern Physics E, 24 (7). ISSN 02183013

Ismail, I. and Baioumy, H. and Ouyang, H. and Mossa, H. and Aly, H.F. (2015) Origin of fluorite mineralizations in the Nuba Mountains, Sudan and their rare earth element geochemistry. Journal of African Earth Sciences, 112. pp. 276-286. ISSN 1464343X

J

Jaafar, J. and Janjua, U.I. and Lai, F.W. (2015) Software effective risk management: An evaluation of risk management process models and standards. Lecture Notes in Electrical Engineering, 339. pp. 837-844. ISSN 18761100

Jahan, S. and Sakidin, H. (2015) Influence of heat transfer on the MHD stagnation point flow of a power law fluid with convective boundary condition. Jurnal Teknologi, 77 (20). pp. 53-59. ISSN 01279696

Japper-Jaafar, A. and Bhaskoro, P.T. and Sean, L.L. and Sariman, M.Z. and Nugroho, H. (2015) Yield stress measurement of gelled waxy crude oil: Gap size requirement. Journal of Non-Newtonian Fluid Mechanics, 218. pp. 71-82. ISSN 03770257

Javaid, M.Y. and Ovinis, M. and Thirumalaiswamy, N. and Hashim, F.B.M. and Maimun, A. and Ullah, B. (2015) Dynamic motion analysis of a newly developed autonomous underwater glider with rectangular and tapered wing. Indian Journal of Geo-Marine Sciences, 44 (12). pp. 1928-1936. ISSN 25826506

Javaid, N. and Ahmad, A. and Nadeem, Q. and Imran, M. and Haider, N. (2015) iM-SIMPLE: iMproved stable increased-throughput multi-hop link efficient routing protocol for Wireless Body Area Networks. Computers in Human Behavior, 51. pp. 1003-1011. ISSN 07475632

Jawad, Z.A. and Ahmad, A.L. and Low, S.C. and Chew, T.L. and Zein, S.H.S. (2015) Influence of solvent exchange time on mixed matrix membrane separation performance for CO2/N2 and a kinetic sorption study. Journal of Membrane Science, 476. pp. 590-601. ISSN 03767388

Jebaraj, S. and Iniyan, S. (2015) Oil demand forecasting for India using artificial neural network. International Journal of Global Energy Issues, 38 (4-6). pp. 322-341. ISSN 09547118

Jebaraj, S. and Srinivasa Rao, P. (2015) High-efficiency solar oven for tropical countries. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10213-10217. ISSN 18196608

Johnson, O.A. and Madzlan, N. and Kamaruddin, I. (2015) Encapsulation of petroleum sludge in building blocks. Construction and Building Materials, 78. pp. 281-288. ISSN 09500618

Johnson, O.A. and Madzlan, N. and Kamaruddin, I. and Oloruntobi, O.O. (2015) Building blocks from petroleum sludge: Leachability and toxicity studies. International Journal of Applied Engineering Research, 10 (24). pp. 45479-45481. ISSN 09734562

Jumbri, K. and Al-Haniff Rozy, M.F. and Ashari, S.E. and Mohamad, R. and Basri, M. and Fard Masoumi, H.R. (2015) Optimisation and characterisation of lipase catalysed synthesis of a kojic monooleate ester in a solvent-free system by response surface methodology. PLoS ONE, 10 (12). ISSN 19326203

K

Kaeomanee, Y. and Dominic, P.D.D. and Mohd Rias, R. (2015) Social software characteristics and the impacts on students' knowledge sharing behaviour. International Journal of Business Innovation and Research, 9 (2). pp. 163-187. ISSN 17510252

Kaewanuchit, C. and Muntaner, C. and Isha, N. (2015) A causal relationship of occupational stress among university employees. Iranian Journal of Public Health, 44 (7). pp. 931-938. ISSN 22516085

Kamal, S. and Sharma, K.V. and Jayaganthan, R. and Prakash, S. (2015) Hot corrosion behavior of thermal spray coatings on superalloy in coal-fired boiler environment. Journal of Materials Research, 30 (18). pp. 2829-2843. ISSN 08842914

Kannan, R. and Shanmuga Priyan, S. and Setiawan, J.D. (2015) Experimental verification of multilevel inverter with MPPT based solar energy. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10236-10244. ISSN 18196608

Kee, K.E. and Babic, M. and Richter, S. and Paolinelli, L. and Li, W. and Nesic, S. (2015) Flow patterns and water wetting in gas-oil-water three-phase flow - A flow loop study. NACE - International Corrosion Conference Series, 2015-J. ISSN 03614409

Khalifa, M.K.H. and Mahmud, W.M. and Alta�ee, A.F. and Mills, K.J. (2015) Sequence stratigraphic analysis of fluvial deposits using facies characterization and wireline log correlation: case of the late Early-early Middle Devonian Snake Cave Interval, Darling Basin, Australia. Arabian Journal of Geosciences, 8 (11). pp. 9733-9752. ISSN 18667511

Khan, A.M. and Jeoti, V. (2015) On time-domain OFDM channel estimation: Use of pilots correlation for digital video broadcasting (DVB) cable receiver. Optoelectronics and Advanced Materials, Rapid Communications, 9 (5-6). pp. 891-897. ISSN 18426573

Khan, A.M. and Jeoti, V. and Azman Zakariya, M. (2015) Pilot based pre FFT signal to noise ratio estimation for OFDM systems in Rayleigh-fading channel. Lecture Notes in Electrical Engineering, 315. pp. 171-182. ISSN 18761100

Khan, M.A. and Ali, A. and Dennis, L.C.C. and Islam, S. and Khan, I. and Ullah, M. and Gul, T. (2015) Dynamical behavior of cholera epidemic model with non-linear incidence rate. Applied Mathematical Sciences, 9 (17-20). pp. 989-1002. ISSN 1312885X

Khan, M.A. and Ali, Z. and Dennis, L.C.C. and Khan, I. and Islam, S. and Ullah, M. and Gul, T. (2015) Stability analysis of an SVIR epidemic model with non-linear saturated incidence rate. Applied Mathematical Sciences, 9 (21-24). pp. 1145-1158. ISSN 1312885X

Khan, M.A. and Jeoti, V. (2015) On the enlargement of robust region of chaotic tent map for the use in key based substitution-box (S-Box). Journal of Computer Science, 11 (3). pp. 517-525. ISSN 15493636

Khan, M.B. and Lee, X.Y. and Nisar, H. and Ng, C.A. and Yeap, K.H. and Malik, A.S. (2015) Digital image processing and analysis for activated sludge wastewater treatment. Advances in Experimental Medicine and Biology, 823. pp. 227-248. ISSN 00652598

Khan, M.I. and Min, T.K. and Azizli, K. and Sufian, S. and Ullah, H. and Man, Z. (2015) Effective removal of methylene blue from water using phosphoric acid based geopolymers: Synthesis, characterizations and adsorption studies. RSC Advances, 5 (75). pp. 61410-61420. ISSN 20462069

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2015) A case study on preparation, stability and physical properties of water in diesel emulsion. ARPN Journal of Engineering and Applied Sciences, 10 (22). pp. 17289-17293. ISSN 18196608

Khan, R.A. and Liew, M.S. and Zawawi, N.A.W.A. (2015) Impulse response analysis for Malaysian construction sector by vector error correction model. Malaysian Construction Research Journal, 16 (1). pp. 1-14. ISSN 19853807

Khan, W.Z. and Aalsalem, M.Y. and Saad, N.M. (2015) Distributed clone detection in static Wireless Sensor Networks: Random Walk with Network Division. PLoS ONE, 10 (5). ISSN 19326203

Khan, Z. and Inayat, A. and Yusup, S. and Ahmad, M.M. (2015) Kinetic parameters determination using optimization approach in integrated catalytic adsorption steam gasification for hydrogen production. International Journal of Hydrogen Energy, 40 (29). pp. 8824-8832. ISSN 03603199

Khan, Z. and Razali, R.B. and Daud, H. and Nor, N.M. and Firuzabad, M.F. (2015) The largest studentized residual test for bad data identification in state estimation of a power system. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10184-10191. ISSN 18196608

Kheradmand, M. and Castro-Gomes, J. and Azenha, M. and Silva, P.D. and De Aguiar, J.L.B. and Zoorob, S.E. (2015) Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems. Construction and Building Materials, 89. pp. 48-59. ISSN 09500618

Khoa, T.H. and Vasant, P.M. and Balbir Singh, M.S. and Dieu, V.N. (2015) Solving economic dispatch problem with valve-point effects using swarm-based mean�variance mapping optimization (MVMOS). Cogent Engineering, 2 (1). ISSN 23311916

Kim, D.K. and Choi, H.S. and Shin, C.S. and Liew, M.S. and Yu, S.Y. and Park, K.S. (2015) Fatigue performance of deepwater SCR under short-term VIV considering various S-N curves. Structural Engineering and Mechanics, 53 (5). pp. 881-896. ISSN 12254568

Kudiri, K.M. and Said, A.M. and Nayan, M.Y. (2015) Emotion detection through speech and facial expressions. Journal of Theoretical and Applied Information Technology, 82 (1). pp. 172-183. ISSN 19928645

Kulsi, C. and Mitra, M. and Kargupta, K. and Ganguly, S. and Banerjee, D. and Goswami, S. (2015) Effect of different surfactants and thicknesses on electrodeposited films of bismuth telluride and its thermoelectric performance. Materials Research Express, 2 (10). ISSN 20531591

Kumar, A. and Gupta, A. and Sharma, K.V. (2015) Thermal and mechanical properties of urea-formaldehyde (UF) resin combined with multiwalled carbon nanotubes (MWCNT) as nanofiller and fiberboards prepared by UF-MWCNT. Holzforschung, 69 (2). pp. 199-205. ISSN 00183830

Kurian, V.J. and Goh, S.S. and Wahab, M.M.A. and Liew, M.S. (2015) Component reliability assessment of offshore jacket platforms. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 1-10. ISSN 20407459

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2015) An experimental investigation of the responses of classic spar platform subjected to bi-directional waves. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 11-17. ISSN 20407459

Kurian, V.J. and Ng, C.Y. and Liew, M.S. (2015) A numerical and experimental study on motion responses of semi-submersible platforms subjected to short-crested waves. Journal of Vibration Engineering and Technologies, 3 (3). pp. 331-344. ISSN 25233920

Kurnia, J.C. and Sasmito, A.P. and Hassani, F.P. and Mujumdar, A.S. (2015) Introduction and evaluation of a novel hybrid brattice for improved dust control in underground mining faces: A computational study. International Journal of Mining Science and Technology, 25 (4). pp. 537-543. ISSN 20952686

Kurnia, K.A. and Lima, F. and Cláudio, A.F.M. and Coutinho, J.A.P. and Freire, M.G. (2015) Hydrogen-bond acidity of ionic liquids: an extended scale. Physical Chemistry Chemical Physics, 17 (29). pp. 18980-18990. ISSN 14639076

Kutty, S.R.M. and Yoong, L.S. and Khun, T.C. (2015) Growth performance, waste reduction and efficiency of conversion of digested food waste by Hermetia illucens larvae via bioconversion. Journal of Pure and Applied Microbiology, 9 (Specia). pp. 533-537. ISSN 09737510

L

Laghari, S.M. and Isa, M.H. and Laghari, A.J. (2015) Delignification of coconut husk by microwave assisted chemical pretreatment. Advances in Environmental Biology, 9 (1). pp. 1-5. ISSN 19950756

Lai, F.-W. (2015) Empirical examination of enterprise risk management�s value creation mechanism. WSEAS Transactions on Business and Economics, 12. pp. 111-123. ISSN 11099526

Lai, G.T. and Rafek, A.G. and Serasa, A.S. and Simon, N. and Ern, L.K. and Hussin, A. (2015) Empirical correlation of uniaxial compressive strength and primary wave velocity of Malaysian schists. Electronic Journal of Geotechnical Engineering, 20 (5). pp. 1801-1812. ISSN 10893032

Lai, G.T. and Rafek, A.G. and Serasa, A.S. and Simon, N. and Hussin, A. and Ern, L.K. (2015) Correlation of ultrasonic velocity slowness with uniaxial compressive strength of schists in Malaysia. Electronic Journal of Geotechnical Engineering, 20 (25). pp. 12663-12670. ISSN 10893032

Lai, L.S. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2015) CO2 and CH4 permeation through zeolitic imidazolate framework (ZIF)-8 membrane synthesized via in situ layer-by-layer growth: an experimental and modeling study. RSC Advances, 5 (96). pp. 79098-79106. ISSN 20462069

Langove, N. and Isha, A.S.N. and Javaid, M.U. (2015) Time pressure, employee well-being, perceived organizational support and turnover intention of information technology executives in Malaysia: A proposed conceptual framework. Advanced Science Letters, 21 (6). pp. 1898-1901. ISSN 19366612

Le, S.N.T. and Nguyen, K.V. and Mahadzir, S.B. and Chen, C.-L. (2015) Applying exergy analysis for simulation and optimization of the iso-butane recovery process from liquefied petroleum gas. Chemical Engineering Transactions, 45. pp. 619-624. ISSN 22839216

Leong, S.Y. and Kutty, S.R.M. and Tan, C.K. and Tey, L.H. (2015) Comparative study on the effect of organic waste on lauric acid produced by hermetia illucens larvae via bioconversion. Journal of Engineering Science and Technology, 10 (Spec. ). pp. 52-63. ISSN 18234690

Lethesh, K.C. and Shah, S.N. and Mutalib, M.I.A. (2015) Synthesis, characterization, physical and thermodynamic properties of diazobicyclo undecene based dicyanamide ionic liquids. Journal of Molecular Liquids, 208. pp. 253-258. ISSN 01677322

Lieu, T. and Yusup, S. and Moniruzzaman, M. (2015) Parametric study of esterification of free fatty acids derived from Ceiba Pentandra seed oil using microwaveassisted technique via response surface methodology. Chemical Engineering Transactions, 45. pp. 931-936. ISSN 22839216

Liew, M.S. and Nordin, A.H. and Lim, E.S. and Zawawi, N.A.W.A. (2015) Wave energy spectrum for the south China sea. Marine Technology, 52 (3). pp. 15-18. ISSN 00253316

Liew, M.S. and Zawawi, N.A.W.A. (2015) The decommissioning challenge. Marine Technology, 52 (3). pp. 50-54. ISSN 00253316

Lim, C.H. and Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusup, S. and Lam, H.L. (2015) Element characteristic tolerance for semi-batch fixed bed biomass pyrolysis. Chemical Engineering Transactions, 45. pp. 1285-1290. ISSN 22839216

Liñán, E. and Gámez Vintaned, J.A. and Gozalo, R. (2015) The middle lower Cambrian (Ovetian) Lunagraulos n. gen. from Spain and the oldest trilobite records. Geological Magazine, 152 (6). pp. 1123-1136. ISSN 00167568

Lock, S.S.M. and Lau, K.K. and Ahmad, F. and Shariff, A.M. (2015) Modeling, simulation and economic analysis of CO2 capture from natural gas using cocurrent, countercurrent and radial crossflow hollow fiber membrane. International Journal of Greenhouse Gas Control, 36. pp. 114-134. ISSN 17505836

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. (2015) Effect of recycle ratio on the cost of natural gas processing in countercurrent hollow fiber membrane system. Journal of Industrial and Engineering Chemistry, 21. pp. 542-551. ISSN 1226086X

Lubis, A.M.H.S. and Ariwahjoedi, B. and Sudin, M.B. (2015) Investigation on oxidation and thermal stability of jatropha oil. Jurnal Teknologi, 77 (21). pp. 79-83. ISSN 01279696

M

Madani, T. and Tahir, M. and Ziauddin, S. and Raza, S. and Ahmed, M. and Khan, M. and Ashraf, M. (2015) An accelerometer-based approach to evaluate 3D unistroke gestures. International Arab Journal of Information Technology, 12 (4). pp. 389-394. ISSN 16833198

Madni, T.M. and Nayan, Y. and Sulaiman, S. and Tahir, M. (2015) Comparative investigation of medical contents using desktop and tabletop technologies. Lecture Notes in Electrical Engineering, 339. pp. 225-233. ISSN 18761100

Madni, T.M. and Nayan, Y. and Sulaiman, S. and Tahir, M. and Abro, A. and Khan, M.I. (2015) Collaborative learning using tabletop and interactive whiteboard systems. International Journal of Business Information Systems, 20 (3). pp. 382-395. ISSN 17460972

Maharun, M. and Baharom, M.B. and Mohd, M.S. (2015) Ride comfort simulation of a vehicle equipped with semiactive steering system. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2495-2503. ISSN 22298649

Mahgoub, B.K.M. and Hassan, S. and Sulaiman, S.A. (2015) Effect of varying engine parameters and syngas composition on the combustion characteristics, performance and emission of syngas-diesel dual fuel engine - A review. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7712-7718. ISSN 18196608

Mahgoub, B.K.M. and Sulaiman, S.A. and Karim, Z.A.A. (2015) Performance study of imitated syngas in a dual-fuel compression ignition diesel engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2282-2293. ISSN 22298649

Mahmod, M.F. and Bakar, E.A. and Othman, A.R. and Ramzi, A.R. and Goh, C.Y. (2015) Fiber glass composite laminates (FGCL) measurement using 3 axis pulse echo scanning unit. Jurnal Teknologi, 76 (1). pp. 147-155. ISSN 01279696

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Akil, H.Md. (2015) Comparison of some biocomposite board properties fabricated from lignocellulosic biomass before and after Ionic liquid pretreatment. Chemical Engineering Transactions, 45. pp. 709-714. ISSN 22839216

Majeed, Z. and Ramli, N.K. and Mansor, N. and Man, Z. (2015) A comprehensive review on biodegradable polymers and their blends used in controlled-release fertilizer processes. Reviews in Chemical Engineering, 31 (1). pp. 69-95. ISSN 01678299

Majidaie, S. and Onur, M. and Tan, I.M. (2015) An experimental and numerical study of chemically enhanced water alternating gas injection. Petroleum Science, 12 (3). pp. 470-482. ISSN 16725107

Malakahmad, A. and Abd Manan, T.S. and Sivapalan, S. (2015) Detection methods of carcinogens in estuaries: A review. International Journal of Sustainable Development and Planning, 10 (5). pp. 601-619. ISSN 17437601

Maleki, M. and Beitollahi, A. and Javadpour, J. and Yahya, N. (2015) Dual template route for the synthesis of hierarchical porous boron nitride. Ceramics International, 41 (3). pp. 3806-3813. ISSN 02728842

Malik, A.S. and Khairuddin, R.N.H.R. and Amin, H.U. and Smith, M.L. and Kamel, N. and Abdullah, J.M. and Fawzy, S.M. and Shim, S. (2015) EEG based evaluation of stereoscopic 3D displays for viewer discomfort. BioMedical Engineering Online, 14 (1). ISSN 1475925X

Manaf, S.A.A. and Roy, P. and Sharma, K.V. and Ngaini, Z. and Malgras, V. and Aldalbahi, A. and Alshehri, S.M. and Yamauchi, Y. and Hegde, G. (2015) Catalyst-free synthesis of carbon nanospheres for potential biomedical applications: Waste to wealth approach. RSC Advances, 5 (31). pp. 24528-24533. ISSN 20462069

Marneni, N. and Ashraf, M. (2015) Mixed convection flow over a permeable stretching wedge in the presence of heat generation/absorption, viscous dissipation, radiation and ohmic heating. Chemical Engineering Transactions, 45. pp. 955-960. ISSN 22839216

Marneni, N. and Tippa, S. and Pendyala, R. (2015) Ramp temperature and Dufour effects on transient MHD natural convection flow past an infinite vertical plate in a porous medium. European Physical Journal Plus, 130 (12). pp. 1-22. ISSN 21905444

Martins, M.A.R. and Neves, C.M.S.S. and Kurnia, K.A. and Carvalho, P.J. and Rocha, M.A.A. and Santos, L.M.N.B.F. and Pinho, S.P. and Freire, M.G. (2015) Densities, viscosities and derived thermophysical properties of water-saturated imidazolium-based ionic liquids. Fluid Phase Equilibria, 407. pp. 188-196. ISSN 03783812

Mastor, F.A. and Aziz, I.A. and Haron, N.S. and Jaafar, J. and Ismail, N.N. and Mehat, M. (2015) Pre-flood warning system based on user mobility. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17905-17913. ISSN 18196608

Mat Desa, W.L.H. and Kamaruddin, S. and Nawawi, M.K.M. and Zulkepli, J. (2015) Evaluation on absenteeism effect in production line at aircraft composite manufacturer. Jurnal Teknologi, 77 (5). pp. 63-67. ISSN 01279696

Mazinani, I. and Binti Ismail, Z. and Hashim, A.M. (2015) Erratum: An Overview of Tsunami Wave Force on Coastal Bridge and Open Challenges (Journal of Earthquake and Tsunami (2015) 9:2 (1550006). Journal of Earthquake and Tsunami, 9 (3). ISSN 17934311

Mazinani, I. and Ismail, Z.B. and Hashim, A.M. (2015) An Overview of Tsunami Wave Force on Coastal Bridge and Open Challenges. Journal of Earthquake and Tsunami, 9 (2). ISSN 17934311

Mazlan, M.A.F. and Uemura, Y. and Osman, N.B. and Yusup, S. (2015) Fast pyrolysis of hardwood residues using a fixed bed drop-type pyrolyzer. Energy Conversion and Management, 98. pp. 208-214. ISSN 01968904

Md Yusof, M.A. and Mahadzir, N.A. (2015) Development of mathematical model for hydraulic fracturing design. Journal of Petroleum Exploration and Production Technology, 5 (3). pp. 269-276. ISSN 21900558

Mebrahitom Asmelash, G. and Mamat, O. and Ahmad, F. and Prasada Rao, A.K. (2015) Thermal shock and fatigue behavior of pressureless sintered Al2O3�SiO2�ZrO2 composites. Journal of Advanced Ceramics, 4 (3). pp. 190-198. ISSN 22264108

Mei, I.L.S. and Ismail, I. and Shafquet, A. and Abdullah, B. (2015) Real-time monitoring and measurement of wax deposition in pipelines via non-invasive electrical capacitance tomography. Measurement Science and Technology, 27 (2). ISSN 09570233

Memon, A.H. and Bin Ibrahim, T. and Nallagowden, P. (2015) Design optimization of a pico linear permanent magnet generator with novel shaped magnet for wave energy conversion using finite element analysis. International Journal of Applied Engineering Research, 10 (18). pp. 39058-39065. ISSN 09734562

Memon, M.A. and Salleh, R. and Baharom, M.N.R. (2015) Linking person-job fit, person-organization fit, employee engagement and turnover intention: A three-step conceptual model. Asian Social Science, 11 (2). pp. 313-320. ISSN 19112017

Memon, M.A. and Salleh, R. and Baharom, M.N.R. (2015) Person-organization fit and turnover intention: Conceptualizing the moderating role of social exchange ideology. Advanced Science Letters, 21 (6). pp. 2127-2129. ISSN 19366612

Memon, P.Q. and Yong, S.-P. and Pao, W. and Pau, J.S. (2015) Dynamic well bottom-hole flowing pressure prediction based on radial basis neural network. Studies in Computational Intelligence, 591. pp. 279-292. ISSN 1860949X

Miin, C.S. and Sulaiman, S.A. and Raghavan, V.R. and Heikal, M.R. and Naz, M.Y. (2015) Hydrodynamics of multi-sized particles in stable regime of a swirling bed. Korean Journal of Chemical Engineering, 32 (11). pp. 2361-2367. ISSN 02561115

Mitra, M. and Kulsi, C. and Chatterjee, K. and Kargupta, K. and Ganguly, S. and Banerjee, D. and Goswami, S. (2015) Reduced graphene oxide-polyaniline composites - Synthesis, characterization and optimization for thermoelectric applications. RSC Advances, 5 (39). pp. 31039-31048. ISSN 20462069

Mi�i�, V. and Yusup, S. and Damjanovi�, V. and Chan, Y.H. (2015) Kinetic modelling of supercritical carbon dioxide extraction of sage (Salvia officinalis L.) leaves and jatropha (Jatropha curcas L.) seeds. Journal of Supercritical Fluids, 100. pp. 142-145. ISSN 08968446

Moayedfar, M. and Abdul-Rani, A.M. and Kumar, D. (2015) An integrated approach utilising imaging and computer aided design of MR images for customized medical knee implants production. Journal of Medical Imaging and Health Informatics, 5 (8). pp. 1839-1842. ISSN 21567018

Mohamed, N.M. and Bashiri, R. and Chong, F.K. and Sufian, S. and Kakooei, S. (2015) Photoelectrochemical behavior of bimetallic Cu-Ni and monometallic Cu, Ni doped TiO2 for hydrogen production. International Journal of Hydrogen Energy, 40 (40). pp. 14031-14038. ISSN 03603199

Mohamed, N.M. and Khatani, M. and Hamid, N.H. and Sahmer, A.Z. and Zaine, S.N.A. (2015) Performance analysis of dye solar cell with additional TiO2 layer under different light Intensities. Materials Science in Semiconductor Processing, 38. pp. 381-386. ISSN 13698001

Mohammad Rozali, N.E. and Wan Alwi, S.R. and Manan, Z.A. and Klemeš, J.J. (2015) Peak-off-peak load shifting for hybrid power systems based on Power Pinch Analysis. Energy, 90. pp. 128-136. ISSN 03605442

Mohammadat, M.T. and Ali, N.B.Z. and Hussin, F.A. and Zwolinski, M. (2015) Resistive open faults detectability analysis and implications for testing low power nanometric ICs. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 23 (3). pp. 580-583. ISSN 10638210

Mohammed, B.S. and Ibrahim, R. and Perumal, N. and Rama Rao, K.S. (2015) Power flow control of a multi-bus/three-feeder distribution system using generalized unified power quality conditioner. Journal of Electrical Engineering and Technology, 10 (1). pp. 8-17. ISSN 19750102

Mohammed, I.Y. and Abakr, Y.A. and Kabir, F. and Yusuf, S. (2015) Effect of aqueous pretreatment on pyrolysis characteristics of napier grass. Journal of Engineering Science and Technology, 10 (11). pp. 1487-1496. ISSN 18234690

Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusuf, S. and Alshareef, I. and Chin, S.A. (2015) Pyrolysis of Napier Grass in a Fixed Bed Reactor: Effect of Operating Conditions on Product Yields and Characteristics. BioResources, 10 (4). pp. 6457-6478. ISSN 19302126

Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusup, S. and Alshareef, I. and Chin, S.A. (2015) Comprehensive characterization of Napier grass as a feedstock for thermochemical conversion. Energies, 8 (5). pp. 3403-3417. ISSN 19961073

Mohammed, I.Y. and Kazi, F.K. and Abakr, Y.A. and Yusuf, S. and Razzaque, M.A. (2015) Novel method for the determination of water content and higher heating value of pyrolysis oil. BioResources, 10 (2). pp. 2681-2690. ISSN 19302126

Mohd Zaid, H.F. and Chong, F.K. and Abdul Mutalib, M.I. (2015) Photooxidative-extractive deep desulfurization of diesel using Cu-Fe/TiO2 and eutectic ionic liquid. Fuel, 156. pp. 54-62. ISSN 00162361

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2015) Ionic liquid embedded in polymeric membrane for high pressure CO2 separation. Chemical Engineering Transactions, 45. pp. 1423-1428. ISSN 22839216

Mohtar, S.S. and Tengku Malim Busu, T.N.Z. and Md Noor, A.M. and Shaari, N. and Yusoff, N.A. and Bustam Khalil, M.A. and Abdul Mutalib, M.I. and Mat, H.B. (2015) Extraction and characterization of lignin from oil palm biomass via ionic liquid dissolution and non-toxic aluminium potassium sulfate dodecahydrate precipitation processes. Bioresource Technology, 192. pp. 212-218. ISSN 09608524

Mokhtar, A.A. and Saari, N. and Ismail, M.C. (2015) Assessment of insulated piping system inspection using logistic regression. Lecture Notes in Mechanical Engineering, 19. pp. 265-277. ISSN 21954356

Moniruzzaman, M. and Mahmood, H. and Kamiya, N. and Yusup, S. and Goto, M. (2015) Activity and stability of enzyme immobilized with ionic liquid based polymer materials. Journal of Engineering Science and Technology, 10. pp. 60-69. ISSN 18234690

Montasir, O.A. and Yenduri, A. and Kurian, V.J. (2015) Effect of mooring line configurations on the dynamic responses of truss spar platforms. Ocean Engineering, 96. pp. 161-172. ISSN 00298018

Mubashir, M. and Yeong, Y.F. and Binti Mohamed Nazri, N.S. and Lau, K.K. (2015) Accelerated synthesis of deca-dodecasil 3 rhombohedral (DDR3) zeolite crystals via hydrothermal growth coupled with ultrasonic irradiation method. RSC Advances, 5 (29). pp. 22658-22664. ISSN 20462069

Muhammad, I.D. and Awang, M. and Mamat, O. and Shaari, K.Z.K. (2015) Estimating young's modulus of single-walled zirconia nanotubes using nonlinear finite element modeling. Journal of Nanomaterials, 2015. ISSN 16874110

Muhammad, I.D. and Awang, M. and Seng, L.K. (2015) Numerical modelling of Young�s modulus of single-layered cubic zirconia nanosheets. Advanced Structured Materials, 70. pp. 373-380. ISSN 18698433

Muhammad, M. and Nasir, M. and Mokhtar, A.A. and Hussin, H. (2015) Continuous life cycle cost model for repairable system. Lecture Notes in Mechanical Engineering, 19. pp. 279-287. ISSN 21954356

Muhammad, M. and Yeong, Y.F. and Lau, K.K. and Mohd Shariff, A.B. (2015) Issues and challenges in the development of deca-dodecasil 3 rhombohedral membrane in CO2 capture from natural gas. Separation and Purification Reviews, 44 (4). pp. 331-340. ISSN 15422119

Muhammad, N. and Elsheikh, Y.A. and Mutalib, M.I.A. and Bazmi, A.A. and Khan, R.A. and Khan, H. and Rafiq, S. and Man, Z. and Khan, I. (2015) An overview of the role of ionic liquids in biodiesel reactions. Journal of Industrial and Engineering Chemistry, 21. pp. 1-10. ISSN 1226086X

Muhammad, N. and Gao, Y. and Khan, M.I. and Khan, Z. and Rahim, A. and Iqbal, F. and khan, A.S. and Iqbal, J. (2015) Effect of ionic liquid on thermo-physical properties of bamboo biomass. Wood Science and Technology, 49 (5). pp. 897-913. ISSN 00437719

Muhammad, N. and Man, Z. and Mutalib, M.I.A. and Bustam, M.A. and Wilfred, C.D. and Khan, A.S. and Ullah, Z. and Gonfa, G. and Nasrullah, A. (2015) Dissolution and Separation of Wood Biopolymers Using Ionic Liquids. ChemBioEng Reviews, 2 (4). pp. 257-278. ISSN 21969744

Muhammad, N.A. and Chin, J.F. and Kamarrudin, S. and Chik, M.A. and Prakash, J. (2015) Fundamental simulation studies of CONWIP in front-end wafer fabrication. Journal of Industrial and Production Engineering, 32 (4). pp. 232-246. ISSN 21681015

Muhammad, Y. and Norani Muti, M. and Nor Hisham, H. and Mohamed Shuaib, M.S. and Shazia, S. (2015) Growth of sub-millimeter long vertically aligned multi-walled carbon nanotubes arrays for sensing applications. Malaysian Journal of Microscopy, 11 (1). pp. 121-126. ISSN 18237010

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2015) Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites. International Journal of Powder Metallurgy, 51 (1). pp. 57-66. ISSN 08887462

Mukhtar, A. and Xia, L. and Tang, T.B. (2015) Vehicle Detection Techniques for Collision Avoidance Systems: A Review. IEEE Transactions on Intelligent Transportation Systems, 16 (5). pp. 2318-2338. ISSN 15249050

Mumtaz, W. and Malik, A.S. and Ali, S.S.A. and Yasin, M.A.M. (2015) A study to investigate different EEG reference choices in diagnosing major depressive disorder. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9492. pp. 77-86. ISSN 03029743

Mumtaz, W. and Malik, A.S. and Yasin, M.A.M. and Xia, L. (2015) Review on EEG and ERP predictive biomarkers for major depressive disorder. Biomedical Signal Processing and Control, 22. pp. 85-98. ISSN 17468094

Muniandy, M. and Sulaiman, S. (2015) An exploratory study on blind users� mental model in computer accessibility. Lecture Notes in Electrical Engineering, 315. pp. 925-938. ISSN 18761100

Munir, S. and Siddiqui, M.I. and Heikal, M. and Abdul Aziz, A.R. and de Sercey, G. (2015) Identification of dominant structures and their flow dynamics in the turbulent two-phase flow using POD technique. Journal of Mechanical Science and Technology, 29 (11). pp. 4701-4710. ISSN 1738494X

Musah, A.A. and Ghazali, Z. and Isha, A.S.N. (2015) Role of temperament and communication in conflict management styles: A conceptual approach. Advanced Science Letters, 21 (6). pp. 1776-1780. ISSN 19366612

Mushtaq, M. and Tan, I.M. and Rashid, U. and Sagir, M. and Mumtaz, M. (2015) Effect of pH on the static adsorption of foaming surfactants on Malaysian sandstone. Arabian Journal of Geosciences, 8 (10). pp. 8539-8548. ISSN 18667511

Mustafa, A.T. and Al-Kayiem, H.H. and Gilani, S.I.U. (2015) Investigation and evaluation of the solar air collector model to support the solar vortex engine. ARPN Journal of Engineering and Applied Sciences, 10 (12). pp. 5309-5319. ISSN 18196608

Mustafa, A.T. and Al-Kayiem, H.H. and Gilani, S.I.U. (2015) A review of convective and artificial vortices for power generation. International Journal of Sustainable Development and Planning, 10 (5). pp. 650-665. ISSN 17437601

Mustafa, M.R. and Rezaur, R.B. and Rahardjo, H. and Isa, M.H. and Arif, A. (2015) Artificial neural network modeling for spatial and temporal variations of pore-water pressure responses to rainfall. Advances in Meteorology, 2015. ISSN 16879309

Muthuvalu, M.S. and Asirvadam, V.S. and Mashadov, G. (2015) Performance analysis of Arithmetic Mean method in determining peak junction temperature of semiconductor device. Ain Shams Engineering Journal, 6 (4). pp. 1203-1210. ISSN 20904479

N

Nagrath, V. and Morel, O. and Malik, A. and Saad, N. and Meriaudeau, F. (2015) Dynamic electronic institutions in agent oriented cloud robotic systems. SpringerPlus, 4 (1). pp. 1-16. ISSN 21931801

Nallagownden, P. and Alhaj, H.M.M. and Sarwar, M.B. (2015) Optimizing the efficiency of Oscillating Water Column (OWC) wave energy converter using genetic algorithm. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10218-10227. ISSN 18196608

Naqvi, S.A.A. and Badruddin, N. and Jatoi, M.A. and Malik, A.S. and Hazabbah, W. and Abdullah, B. (2015) EEG based time and frequency dynamics analysis of visually induced motion sickness (VIMS). Australasian Physical and Engineering Sciences in Medicine, 38 (4). pp. 721-729. ISSN 01589938

Naqvi, S.R. and Uemura, Y. and Osman, N. and Yusup, S. (2015) Kinetic study of the catalytic pyrolysis of paddy husk by use of thermogravimetric data and the Coats-Redfern model. Research on Chemical Intermediates, 41 (12). pp. 9743-9755. ISSN 09226168

Naqvi, S.R. and Uemura, Y. and Osman, N. and Yusup, S. (2015) Production and Evaluation of Physicochemical Characteristics of Paddy Husk Bio-char for its C Sequestration Applications. Bioenergy Research, 8 (4). pp. 1800-1809. ISSN 19391234

Naqvi, S.R. and Uemura, Y. and Yusup, S. and Sugiura, Y. and Nishiyama, N. (2015) In situ catalytic fast pyrolysis of paddy husk pyrolysis vapors over MCM-22 and ITQ-2 zeolites. Journal of Analytical and Applied Pyrolysis, 114. pp. 32-39. ISSN 01652370

Nasif, M.S. (2015) Effect of utilizing different permeable material in air-to-air fixed plate energy recovery heat exchangeron energy saving. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10153-10158. ISSN 18196608

Nasir, Q. and Sabil, K.M. and Lau, K.K. (2015) Measurement of isothermal (vapor+liquid) equilibria, (VLE) for binary (CH4+CO2) from T=(240.35 to 293.15) K and CO2 rich synthetic natural gas systems from T=(248.15 to 279.15) K. Journal of Natural Gas Science and Engineering, 27. pp. 158-167. ISSN 18755100

Nasir, R. and Mukhtar, H. and Man, Z. and Dutta, B.K. and Shaharun, M.S. and Abu Bakar, M.Z. (2015) Mixed matrix membrane performance enhancement using alkanolamine solution. Journal of Membrane Science, 483. pp. 84-93. ISSN 03767388

Nasir, R. and Mukhtar, H. and Man, Z. and Shaharun, M.S. and Abu Bakar, M.Z. (2015) Effect of fixed carbon molecular sieve (CMS) loading and various di-ethanolamine (DEA) concentrations on the performance of a mixed matrix membrane for CO2/CH4 separation. RSC Advances, 5 (75). pp. 60814-60822. ISSN 20462069

Nasir, R. and Mukhtar, H. and Man, Z. and Shaharun, M.S. and Bakar, M.Z.A. (2015) Development and performance prediction of polyethersulfone-carbon molecular sieve mixed matrix membrane for CO2/CH4 separation. Chemical Engineering Transactions, 45. pp. 1417-1422. ISSN 22839216

Nasir Shah, S. and Mutalib, M.I.A. and Pilus, R.B.M. and Lethesh, K.C. (2015) Extraction of naphthenic acid from highly acidic oil using hydroxide-based ionic liquids. Energy and Fuels, 29 (1). pp. 106-111. ISSN 08870624

Nasrullah, A. and Khan, H. and Khan, A.S. and Man, Z. and Muhammad, N. and Khan, M.I. and Abd El-Salam, N.M. (2015) Potential biosorbent derived from Calligonum polygonoides for removal of methylene blue dye from aqueous solution. Scientific World Journal, 2015. ISSN 23566140

Nawaz, F. and Jeoti, V. (2015) NFRA-C, neighbor friendly reader to reader anti-collision protocol with counters for dense reader environments. Journal of Network and Computer Applications, 49. pp. 60-67. ISSN 10848045

Nawaz, F. and Jeoti, V. (2015) A novel anti-collision protocol for optimization of remote sensing in dense reader network. Lecture Notes in Electrical Engineering, 315. pp. 213-222. ISSN 18761100

Naz, M.Y. and Ismail, N.I. and Sulaiman, S.A. and Shukrullah, S. (2015) Electrochemical and Dry Sand Impact Erosion Studies on Carbon Steel. Scientific Reports, 5. ISSN 20452322

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Shakir, I. and Ullah, S. and Sagir, M. and Pervaiz, M. (2015) Surface morphology and mechanical strength of AISI M2 tool steel treated in abnormal glow region of plasma. Surface Engineering and Applied Electrochemistry, 51 (1). pp. 58-64. ISSN 10683755

Naz, M.Y. and Shukrullah, S. and Javaid, M.A. and Ghaffar, A. and Rehman, N.U. (2015) Surface Hardening of M2 High Speed Steel Using 50 Hz Pulsed DC Source with Nitrogen as a Base Gas. Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, 45 (7). pp. 1057-1062. ISSN 15533174

Naz, M.Y. and Shukrullah, S. and Khan, Y. and Ghaffar, A. and Rehman, N.U. and Ullah, S. (2015) Actinometry study on dissociation fraction in low pressure capactively coupled Ar-O2 mixture plasma. High Energy Chemistry, 49 (6). pp. 449-458. ISSN 00181439

Naz, M.Y. and Sulaiman, S.A. (2015) Physico-chemical properties of carbohydrate polymer coatings for slow release urea industry. Main Group Chemistry, 14 (1). pp. 35-42. ISSN 10241221

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2015) Effect of the borax mass and pre-spray medium temperature on droplet size and velocity vector distributions of intermittently sprayed starchy solutions. Physical Chemistry Chemical Physics, 17 (5). pp. 3704-3714. ISSN 14639076

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Shaari, K.Z.K. (2015) Effect of pre-coat solution temperature on fluidized bed urea coatings. Surface Engineering, 31 (7). pp. 486-491. ISSN 02670844

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Zilati, K. (2015) Visual characterization of heated water spray jet breakup induced by full cone spray nozzles. Journal of Applied Mechanics and Technical Physics, 56 (2). pp. 211-219. ISSN 00218944

Naz, M.Y. and Sulaiman, S.A. and Man, Z. (2015) Time function DualPDA study of spray growth and droplet size-velocity profiles of chemically modified tapioca starch. Aerosol and Air Quality Research, 15 (5). pp. 1699-1711. ISSN 16808584

Naz, M.Y. and Sulaiman, S.A. and Man, Z. and Ariwahjoedi, B. (2015) Effect of the water spray stress on swirling fluidized bed height. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10192-10195. ISSN 18196608

Nazri, N.I.A.M. and Awang Rambli, D.R. and Doolan, D.C. (2015) Interaction experiences in mobile augmented reality. Jurnal Teknologi, 75 (3). pp. 75-80. ISSN 01279696

Niaz Akhtar, M. and Yahya, N. and Sattar, A. and Ahmad, M. and Idrees, M. and Hasan Asif, M. and Azhar Khan, M. (2015) Investigations of structural and magnetic properties of nanostructured Ni0.5+xZn0.5-xFe2O4 magnetic feeders for CSEM application. International Journal of Applied Ceramic Technology, 12 (3). pp. 625-637. ISSN 1546542X

Nik Yusoff, N.H. and Mamat, O. and Isa, M.C. (2015) A review of electrodeposition techniques and variables for production of nickel-cobalt / alumina (Ni-Co/Al2O3) composite coatings. Defence S and T Technical Bulletin, 8 (2). pp. 129-140. ISSN 19856571

Nisar, H. and Malik, A.S. and Ullah, R. and Shim, S.-O. and Bawakid, A. and Khan, M.B. and Subhani, A.R. (2015) Tracking of EEG activity using motion estimation to understand brain wiring. Advances in Experimental Medicine and Biology, 823. pp. 159-174. ISSN 00652598

Nizamani, F. and Marimuthu, M. (2015) Small and medium enterprises: Asymmetric information and critical factors affecting bank financing. Advanced Science Letters, 21 (5). pp. 1615-1618. ISSN 19366612

Nordin, A. and Majid, M.A.A. (2015) Performance assessment of Heat Recovery Steam Generator at district Cooling plant. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10196-10199. ISSN 18196608

Nordin, S. and Rizal, A.R.A. and Yahya, J. (2015) Communication impact towards innovation on paddy plantation Impak komunikasi terhadap penerimaan inovasi penanaman padi. Jurnal Pengurusan, 44. ISSN 01272713

Norizan, S.N.I.B. and Aziz, I.B.A. and Haron, N.S. and Jaafar, J. and Ismail, N.N. and Mehat, M. (2015) Roadside worker detection and alert system using RFID. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17899-17904. ISSN 18196608

Nuruddin, M.F. and Memon, F.A. and Demie, S. and Shafiq, N. (2015) Influence of water-to-geopolymer solids ratio and curing time on the properties of self-compacting geopolymer concrete. Malaysian Construction Research Journal, 13 (2). pp. 29-38. ISSN 19853807

Nuruddin, M.F. and Ullah Khan, S. and Shafiq, N. and Ayub, T. (2015) Strength prediction models for PVA fiber-reinforced high-strength concrete. Journal of Materials in Civil Engineering, 27 (12). ISSN 08991561

Nurudin, M.F. and Memon, F.A. (2015) Properties of self-compacting geopolymer concrete. Materials Science Forum, 803. pp. 99-109. ISSN 02555476

O

Ofei, T.N. and Irawan, S. and Pao, W. (2015) Modelling of pressure drop in eccentric narrow horizontal annuli with the presence of cuttings and rotating drillpipe. International Journal of Oil, Gas and Coal Technology, 9 (1). pp. 39-60. ISSN 17533309

Ofei, T.N. and Irawan, S. and Pao, W. and Osgouei, R.E. (2015) Modified Yield Power-Law fluid flow in narrow annuli with inner rotating pipe. Canadian Journal of Chemical Engineering, 93 (1). pp. 150-165. ISSN 00084034

Okitsu, J. and Khamis, M.F.I. and Zakaria, N. and Naono, K. and Haruna, A.A. (2015) Toward an architecture for integrated gas district cooling with data center control to reduce CO2 emission. Sustainable Computing: Informatics and Systems, 6. pp. 39-47. ISSN 22105379

Olisa, E. and Sapari, N. and Malakahmad, A. and Orji, K.U. and Riahi, A. (2015) Detection of landfill gas in leachate pipe and pond of a semi-aerobic landfill. Chemical Engineering Transactions, 45. pp. 1687-1692. ISSN 22839216

Ooi, B.L. and Gilbert, J.M. and Aziz, A.R.A. (2015) Switching damping for a frequency-tunable electromagnetic energy harvester. Sensors and Actuators, A: Physical, 234. pp. 311-320. ISSN 09244247

P

Padmanabhan, E. and Sivapriya, B. and Huang, K.H. and Askury, A.K. and Chow, W.S. (2015) The impact of stylolites and fractures in defining critical petrophysical and geomechanical properties of some carbonate rocks. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 1 (1-2). pp. 55-67. ISSN 23638419

Pakpahan, E.N. and Isa, M.H. and Kutty, S.R. and Chantara, S. and Wiriya, W. and Farooqi, I.H. (2015) Effect of excess air on polycyclic aromatic hydrocarbons removal from petroleum sludge using thermal treatment with additives. Journal of Scientific and Industrial Research, 74 (4). pp. 245-249. ISSN 00224456

Pao, W. and Khan, J.A. and Ofei, T.N. and Irawan, S. (2015) Fill removal from horizontal wellbore using foam in different coiled tubing/annulus diameter ratios. International Journal of Oil, Gas and Coal Technology, 9 (2). pp. 129-147. ISSN 17533309

Park, D.K. and Kim, D.K. and Park, C.-H. and Park, D.H. and Jang, B.S. and Kim, B.J. and Paik, J.K. (2015) On the crashworthiness of steel-plated structures in an arctic environment: An experimental and numerical study. Journal of Offshore Mechanics and Arctic Engineering, 137 (5). ISSN 08927219

Partoon, B. and Sabil, K.M. and Keong, L.K. (2015) Capturing carbon dioxide through a gas hydrate-based process. Chemical Engineering Transactions, 45. pp. 1867-1872. ISSN 22839216

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2015) Contact stress evaluation of involute gear pairs, including the effects of friction and helix angle. Journal of Tribology, 137 (4). ISSN 07424787

Pendyala, R. and Chong, J.L. and Ilyas, S.U. (2015) CFD analysis of heat transfer performance in a car radiator with nanofluids as coolants. Chemical Engineering Transactions, 45. pp. 1261-1266. ISSN 22839216

Pendyala, R. and Wong, Y.S. and Ilyas, S.U. (2015) CFD simulations of natural convection heat transfer in enclosures with varying aspect ratios. Chemical Engineering Transactions, 45. pp. 793-798. ISSN 22839216

Pendyala, R. and Yong, J. and Azman, I.A. and Ilyas, S.U. (2015) CFD simulations of transient fuel gases mixing, leakage and flammability in air. Chemical Engineering Transactions, 45. pp. 1921-1926. ISSN 22839216

Pereira, M.M. and Kurnia, K.A. and Sousa, F.L. and Silva, N.J.O. and Lopes-Da-Silva, J.A. and Coutinho, J.A.P. and Freire, M.G. (2015) Contact angles and wettability of ionic liquids on polar and non-polar surfaces. Physical Chemistry Chemical Physics, 17 (47). pp. 31653-31661. ISSN 14639076

Pervaiz, M. and Yousaf, M. and Sagir, M. and Mushtaq, M. and Naz, M.Y. and Ullah, S. and Mushtaq, R. (2015) Synthesis and characterization of bimetallic post transition complexes for antimicrobial activity. Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, 45 (4). pp. 546-552. ISSN 15533174

Potty, N.S. and Sirajuddin, M. (2015) Study on empirical seismic codal guidelines for masonry buildings in Kollam, Kerala, India. Journal of Engineering Science and Technology, 10 (7). pp. 865-877. ISSN 18234690

Prajapati, S. and Ghosh, D. (2015) Acoustic 2D full waveform inversion to solve gas cloud challenges. Annals of Geophysics, 58 (4). ISSN 15935213

Purnomo, E.W. and Ghosh, D.P. (2015) The maximum amplitude weighted integrated energy spectra: A new gauge in seismic thin-bed interpretation. Journal of Engineering and Technological Sciences, 47 (1). pp. 20-35. ISSN 23375779

Q

Qadrouh, A. and Carcione, J.M. and Salim, A.M. and Harith, Z.Z.T. (2015) Attenuation effects on the seismic response of a bottom-simulating reflector. Journal of Natural Gas Science and Engineering, 24. pp. 510-517. ISSN 18755100

Qayyum, A. and Faye, I. and Shoaib, M. and Latif, M.A. (2015) A generalization of Ostrowski type inequality for mappings whose second derivatives belong to L1 (a, b) and applications. International Journal of Pure and Applied Mathematics, 98 (2). pp. 169-180. ISSN 13118080

Qayyum, A. and Shoaib, M. and Faye, I. (2015) Some new generalized results on Ostrowski type integral inequalities with application. Journal of Computational Analysis and Applications, 19 (4). pp. 693-712. ISSN 15211398

Quental, M.V. and Passos, H. and Kurnia, K.A. and Coutinho, J.A.P. and Freire, M.G. (2015) Aqueous Biphasic Systems Composed of Ionic Liquids and Acetate-Based Salts: Phase Diagrams, Densities, and Viscosities. Journal of Chemical and Engineering Data, 60 (6). pp. 1674-1682. ISSN 00219568

R

Rafiq, S. and Maulud, A. and Man, Z. and Mutalib, M.I.A. and Ahmad, F. and Khan, A.U. and Khan, A.L. and Ghauri, M. and Muhammad, N. (2015) Modelling in mixed matrix membranes for gas separation. Canadian Journal of Chemical Engineering, 93 (1). pp. 88-95. ISSN 00084034

Rahmah, A.U. and Harimurti, S. and Omar, A.A. and Murugesan, T. (2015) Kinetics and thermodynamic studies of oxytetracycline mineralization using UV/H2O2. Clean - Soil, Air, Water, 43 (4). pp. 496-503. ISSN 18630650

Rahman, I. and Vasant, P. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2015) Hybrid swarm intelligence-based optimization for charging plug-in hybrid electric vehicle. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9012. pp. 22-30. ISSN 03029743

Rahman, I. and Vasant, P. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2015) Technical challenges of plug-in hybrid electric vehicles deployment in smart electric grid. Contemporary Engineering Sciences, 8 (21-24). pp. 1119-1126. ISSN 13136569

Rahman, I. and Vasant, P.M. and Mahinder Singh, B.S. and Abdullah-Al-Wadud, M. (2015) Swarm Intelligence-Based Smart Energy Allocation Strategy for Charging Stations of Plug-In Hybrid Electric Vehicles. Mathematical Problems in Engineering, 2015. ISSN 1024123X

Rahmanian, N. and Ali, S.H.B. and Homayoonfard, M. and Ali, N.J. and Rehan, M. and Sadef, Y. and Nizami, A.S. (2015) Analysis of physiochemical parameters to evaluate the drinking water quality in the state of perak, Malaysia. Journal of Chemistry, 2015. ISSN 20909063

Rahmanian, N. and Ilias, I.B. and Nasrifar, K. (2015) Process simulation and assessment of a back-up condensate stabilization unit. Journal of Natural Gas Science and Engineering, 26. pp. 730-736. ISSN 18755100

Rahmiati, T. and Azizli, K.A. and Man, Z. and Ismail, L. and Nuruddin, M.F. (2015) Effect of solid/liquid ratio during curing time fly ash based geopolymer on mechanical property. Materials Science Forum, 803. pp. 120-124. ISSN 02555476

Ramli, A. and Farooq, M. (2015) Optimization of process parameters for the production of biodiesel from waste cooking oil in the presence of bifunctional γ-al2o3-ceo2supported catalysts Pengoptimuman Parameter Pemprosesan untuk Penghasilan Biodesel daripada Sisa Minyak Masak dengan Menggunakan Mangkin Dwifungsi Berpenyokong γ-al2o3-ceo2. Malaysian Journal of Analytical Sciences, 19 (1). pp. 8-19. ISSN 13942506

Ramli, R.M. and Chong, F.K. and Omar, A.A. and Murugesan, T. (2015) Performance of Surfactant Assisted Synthesis of Fe/TiO2 on the Photodegradation of Diisopropanolamine. Clean - Soil, Air, Water, 43 (5). pp. 690-697. ISSN 18630650

Rashidi, N.A. and Yusup, S. (2015) Effect of process variables on the production of biomass-based activated carbons for carbon dioxide capture and sequestration. Chemical Engineering Transactions, 45. pp. 1507-1512. ISSN 22839216

Raza, M.Q. and Khosravi, A. (2015) A review on artificial intelligence based load demand forecasting techniques for smart grid and buildings. Renewable and Sustainable Energy Reviews, 50. pp. 1352-1372. ISSN 13640321

Razali, M.F. and Ahmad, A. and Mohd, O. and Bahari, N.I.S. and Sakidin, H. (2015) Quantifying haze from satellite using haze optimized transformation (HOT). Applied Mathematical Sciences, 9 (29-32). pp. 1407-1416. ISSN 1312885X

Razali, R. and Shafie, A. and Hassan, A.R. and Khan, H. (2015) A multivariate study of energy consumption, urbanisation, trade openness and economic growth in Malaysia. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10275-10280. ISSN 18196608

Rehan, M. and Hasbullah, H. and Rehan, M. and Chughtai, O. and Rehan, W. (2015) Zoomout HELLO: A novel 1-hop broadcast scheme to improve network QoS for VANET on highways. Advances in Intelligent Systems and Computing, 306. pp. 75-84. ISSN 21945357

Rehman, M.Z.U. and Baharudin, Z. and Zakariya, M.A. and Khir, M.H.M. and Jilani, M.T. (2015) RF MEMS based tunable bowtie shaped substrate integrated waveguide filter. Radioengineering, 24 (1). pp. 25-31. ISSN 12102512

Reiniati, I. and Osman, N.B. and Mc Donald, A.G. and Laborie, M.-P. (2015) Linear viscoelasticity of hot-pressed hybrid poplar relates to densification and to the in situ molecular parameters of cellulose. Annals of Forest Science, 72 (6). pp. 693-703. ISSN 12864560

Riahi, A. and Yusof, K.W. and Singh, B.S.M. and Olisa, E. and Sapari, N. and Isa, M.H. (2015) The performance investigation of triangular solar stills having different heat storage materials. International Journal of Energy and Environmental Engineering, 6 (4). pp. 385-391. ISSN 20089163

Roslim, M.K. and Hassan, S. and Baheta, A.T. (2015) Experimental investigation on heat transfer enhancement by using porous twisted plate as an insert in a fitted tube. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10164-10168. ISSN 18196608

Rozali, N.E.M. and Alwi, S.R.W. and Ho, W.S. and Manan, Z.A. and Klemeš, J.J. (2015) Expansion of a diesel plant into a hybrid power system using power pinch analysis. Chemical Engineering Transactions, 45. pp. 343-348. ISSN 22839216

S

Saad, M.N.M. and Laouiti, A. and Qayyum, A. (2015) Foreword. Advances in Intelligent Systems and Computing, 306. V-VI. ISSN 21945357

Saad, M.S.M. and Rizal, A.R.A. and Nordin, S.M. (2015) Analyzing inter-organization communication between customer and supplier of subsidized paddy fertilizer. Asian Social Science, 11 (17). pp. 90-100. ISSN 19112017

Sabet, M. and Hassan, A. and Ratnam, C.T. (2015) Properties of ethylene-vinyl acetate filled with metal hydroxide. Journal of Elastomers and Plastics, 47 (1). pp. 88-100. ISSN 00952443

Sabil, K.M. and Nashed, O. and Lal, B. and Ismail, L. and Japper-Jaafar, A. (2015) Experimental investigation on the dissociation conditions of methane hydrate in the presence of imidazolium-based ionic liquids. Journal of Chemical Thermodynamics, 84. pp. 7-13. ISSN 00219614

Saeed, M.O. and Azizli, K. and Isa, M.H. and Bashir, M.J.K. (2015) Application of CCD in RSM to obtain optimize treatment of POME using Fenton oxidation process. Journal of Water Process Engineering, 8. e7-e16. ISSN 22147144

Safdar, R. and Omar, A.A. and Ismail, L.B. and Bari, A. and Lal, B. (2015) Measurement and correlation of physical properties of aqueous solutions of tetrabutylammonium hydroxide, piperazine and their aqueous blends. Chinese Journal of Chemical Engineering, 23 (11). pp. 1811-1818. ISSN 10049541

Saha, S. and Ganguly, S. and Banerjee, D. and Kargupta, K. (2015) Novel bimetallic graphene-cobalt-nickel (G-Co-Ni) nano-ensemble electrocatalyst for enhanced borohydride oxidation. International Journal of Hydrogen Energy, 40 (4). pp. 1760-1773. ISSN 03603199

Saheed, M.S.M. and Mohamed, N.M. (2015) Stack growth of aligned multiwalled carbon nanotubes using floating catalyst chemical vapor deposition technique. Chemical Physics Letters, 625. pp. 53-57. ISSN 00092614

Said, A.M. and Dominic, P.D.D. and Faye, I. (2015) Data stream outlier detection approach based on frequent pattern mining technique. International Journal of Business Information Systems, 20 (1). pp. 55-70. ISSN 17460972

Saini, S. and Zakaria, N. and Rambli, D.R.A. and Sulaiman, S. (2015) Markerless human motion tracking using hierarchical multi-swarm cooperative particle swarm optimization. PLoS ONE, 10 (5). ISSN 19326203

Salami, O.L. and Adeyemi, A.A. (2015) Malaysian islamic banks� efficiency: An intra-bank comparative analysis of islamic windows and full-fledged subsidiaries. International Journal of Business and Society, 16 (1). pp. 19-38. ISSN 15116670

Salihi, I.U. and Kutty, S.R.M. and Isa, M.H. and Olisa, E. and Aminu, N. (2015) Adsorption of copper using modified and unmodified sugarcane bagasse. International Journal of Applied Engineering Research, 10 (19). pp. 40434-40438. ISSN 09734562

Salleh, R. and Memon, M.A. (2015) A review on the effects of pay satisfaction on employee engagement and turnover: A proposed mediating framework. International Business Management, 9 (3). pp. 344-348. ISSN 19935250

Sasmito, A.P. and Kurnia, J.C. and Birgersson, E. and Mujumdar, A.S. (2015) Computational evaluation of thermal management strategies in an underground mine. Applied Thermal Engineering, 90. pp. 1144-1150. ISSN 13594311

Satti, I.A. and Ghosh, D. and Wan Yusoff, W.I. (2015) 3-D predrill overpressure prediction using prestack depth-migrated seismic velocity in a field of southwestern Malay Basin. Arabian Journal of Geosciences, 8 (9). pp. 7387-7398. ISSN 18667511

Satti, I.A. and Ghosh, D. and Yusoff, W.I.W. (2015) 3D predrill pore pressure prediction using basin modeling approach in a field of Malay Basin. Asian Journal of Earth Sciences, 8 (1). pp. 24-31. ISSN 18191886

Satti, I.A. and Ghosh, D. and Yusoff, W.I.W. and Hoesni, M.J. (2015) Origin of overpressure in a field in the southwestern Malay basin. SPE Drilling and Completion, 30 (3). pp. 198-211. ISSN 10646671

Savall, J. and Ho, E.T.W. and Huang, C. and Maxey, J.R. and Schnitzer, M.J. (2015) Dexterous robotic manipulation of alert adult Drosophila for high-content experimentation. Nature Methods, 12 (7). pp. 657-660. ISSN 15487091

Savita, K.S. and Dominic, P.D.D. and Ratnam, K.A. (2015) The role of green IT and IT for green within green supply Chain management: A preliminary finding from ISO14001 companies in Malaysia. Lecture Notes in Electrical Engineering, 315. pp. 883-894. ISSN 18761100

Shaari, K.Z.K. and Awang, M. (2015) Engineering applications of computational fluid dynamics. Advanced Structured Materials, 44. ISSN 18698433

Shabib-Asl, A. and Ayoub, M.A. and Saaid, I.M. and Valentim, P.P.J. (2015) Experimental investigation into effects of crude oil acid and base number on wettability alteration by using different low salinity water in sandstone rock. Journal of the Japan Petroleum Institute, 58 (4). pp. 228-236. ISSN 13468804

Shafiq, N. and Nurrudin, M.F. and Gardezi, S.S.S. and Kamaruzzaman, A.B. (2015) Carbon footprint assessment of a typical low rise office building in Malaysia using building information modelling (BIM). International Journal of Sustainable Building Technology and Urban Development, 6 (3). pp. 157-172. ISSN 2093761X

Shafiq, N. and Nuruddin, M.F. and Khan, S.U. and Ayub, T. (2015) Calcined kaolin as cement replacing material and its use in high strength concrete. Construction and Building Materials, 81. pp. 313-323. ISSN 09500618

Shafiq, N. and Nuruddin, M.F. and Safdar Gardezi, S.S. and Farhan, S.A. and Al Rawy, H.A.M. (2015) Reduction of embodied CO2 emissions from conventional single storey house in malaysia by recycled materials using building information modeling (BIM). Advances in Environmental Biology, 9 (1). pp. 17-21. ISSN 19950756

Shafquet, A. and Ismail, I. and Japper-Jaafar, A. and Sulaiman, S.A. and Chala, G.T. (2015) Estimation of gas void formation in statically cooled waxy crude oil using online capacitance measurement. International Journal of Multiphase Flow, 75. pp. 257-266. ISSN 03019322

Shah, S.N. and Lethesh, K.C. and Abdul Mutalib, M.I. and Mohd Pilus, R.B. (2015) Extraction and recovery of naphthenic acid from acidic oil using supported ionic liquid phases (SILPs). Chemical Product and Process Modeling, 10 (4). pp. 221-228. ISSN 21946159

Shah, S.N. and Lethesh, K.C. and Mutalib, M.I.A. and Pilus, R.B.M. (2015) Evaluation of thermophysical properties of imidazolium-based phenolate ionic liquids. Industrial and Engineering Chemistry Research, 54 (14). pp. 3697-3705. ISSN 08885885

Shahid, R. and Muhammad, N. and Gonfa, G. and Toprak, M.S. and Muhammed, M. (2015) Synthesis, COSMO-RS analysis and optical properties of surface modified ZnS quantum dots using ionic liquids. Journal of Physics and Chemistry of Solids, 85. pp. 34-38. ISSN 00223697

Shaikh, M.S. and Shariff, A.M. and Bustam, M.A. and Murshid, G. (2015) Measurement and prediction of physical properties of aqueous sodium L-prolinate and piperazine as a solvent blend for CO2 removal. Chemical Engineering Research and Design, 102. pp. 378-388. ISSN 02638762

Shaikh, M.S. and Shariff, A.M. and Bustam, M.A. and Murshid, G. (2015) Physicochemical properties of aqueous solutions of sodium glycinate in the non-precipitation regime from 298.15 to 343.15 K. Chinese Journal of Chemical Engineering, 23 (3). pp. 536-540. ISSN 10049541

Shairi, N.A. and Ahmad, B.H. and Wong, P.W. and Zakaria, Z. (2015) High isolation and absorptive feature in single pole double throw (SPDT) discrete switch design using switchable matched ring resonator. Advanced Science Letters, 21 (1). pp. 93-97. ISSN 19366612

Shakir, M. and Qidwai, U. and Malik, A.S. and Kamel, N. (2015) Electroencephalography simulation hardware for realistic seizure, preseizure and normal mode signal generation. Journal of Medical Imaging and Health Informatics, 5 (1). pp. 43-49. ISSN 21567018

Shamim, A. and Ghazali, Z. (2015) Customer participation in value co-creation: Can it develop corporate brand experience? Advanced Science Letters, 21 (5). pp. 1197-1201. ISSN 19366612

Shamsudin, N. and Hussein, S.H. and Nugroho, H. and Ahmad Fadzil, M.H. (2015) Objective assessment of vitiligo with a computerised digital imaging analysis system. Australasian Journal of Dermatology, 56 (4). pp. 285-289. ISSN 00048380

Shannan, N.M. and Yahaya, N.Z. and Singha, B. and Salam, Z. and Ahmed, K.Y. (2015) Two-diode model for parameters extraction of photovoltaic module under temperature variation. IEICE Electronics Express, 12 (19). ISSN 13492543

Shehzad, A. and Bashir, M.J.K. and Sethupathi, S. and Lim, J.-W. (2015) An overview of heavily polluted landfill leachate treatment using food waste as an alternative and renewable source of activated carbon. Process Safety and Environmental Protection, 98. pp. 309-318. ISSN 09575820

Shukrullah, S. and Mohamed, N.M. and Naz, M.Y. and Shaharun, M.S. (2015) Synthesis and Characterization of Multiwalled Carbon Nanotubes Using Ferrocene and Aluminum Oxide/Iron Nitrate Catalysts. Analytical Letters, 48 (2). pp. 340-348. ISSN 00032719

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. (2015) Optimum temperature on structural growth of multiwalled carbon nanotubes with low activation energy. Diamond and Related Materials, 58. pp. 129-138. ISSN 09259635

Siddiqui, F.I. and Pathan, D.M. and Osman, S.B.A.B.S. and Pinjaro, M.A. and Memon, S. (2015) Comparison between regression and ANN models for relationship of soil properties and electrical resistivity. Arabian Journal of Geosciences, 8 (8). pp. 6145-6155. ISSN 18667511

Simon, N. and Ghani, M.F.A. and Hussin, A. and Lai, G.t. and Rafek, A.G. and Surip, N. and Monam, T.R.T. and Ern, L.K. (2015) Assessment of rockfall potential of limestone hills in the Kinta Valley. Journal of Sustainability Science and Management, 10 (2). pp. 24-34. ISSN 18238556

Singh, N.S.S. and Ching, D.L.C. (2015) Auto-based BDEC computational modeling framework for fault tolerant nano-computing. Applied Mathematical Sciences, 9 (13-16). pp. 761-771. ISSN 1312885X

Singh, V. and Elamvazuthi, I. and Jeoti, V. and George, J. and Swain, A.K. and Kumar, D. (2015) 3D reconstruction of CFL ligament based on ultrasonographic images. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9429. pp. 503-513. ISSN 03029743

Siti Nur Azella, Z. and Noraini Muti, M. (2015) Microscopy analysis of synthesized monodisperse SiO2 sphere. Malaysian Journal of Microscopy, 11 (1). pp. 115-120. ISSN 18237010

Slaiman, I. and Tang, T.B. and Hamid, N.H. (2015) Pulse Amplitude and Delay Modulation: Design and performance analysis. Optics Communications, 345. pp. 52-56. ISSN 00304018

Sohail, A. and Dominic, P.D.D. (2015) From ER model to star model: A systematic transformation approach. International Journal of Business Information Systems, 18 (3). pp. 249-267. ISSN 17460972

Soleimani, H. and Abbas, Z. and Yahya, N. and Soleimani, H. and Sabet, M. and Oechsner, A. and Politis, C. (2015) An optimisation approch to determine the electromagnetic properties of lanthanum iron garnet filled PVDF-polymer composite at microwave frequencies. Digest Journal of Nanomaterials and Biostructures, 10 (3). pp. 895-900. ISSN 18423582

Soon, J.N.P. and Mahmood, A.K. and Yin, C.P. and Wan, W.S. and Yuen, P.K. and Heng, L.E. (2015) Barebone cloud IaaS: Revitalisation disruptive technology. International Journal of Business Information Systems, 18 (1). pp. 107-126. ISSN 17460972

Subhan, F. and Ahmed, S. and Ashraf, K. and Imran, M. (2015) Extended Gradient RSSI Predictor and Filter for Signal Prediction and Filtering in Communication Holes. Wireless Personal Communications, 83 (1). pp. 297-314. ISSN 09296212

Sugathan, S.K. and Dominic, D.D. and Ramayah, T. and Ratnam, K.A. (2015) The associating factors and outcomes of green supply chain management implementation � from the technological and non-technological perspectives. Advances in Intelligent Systems and Computing, 353. pp. 491-501. ISSN 21945357

Sulaiman, S. and Rambli, D.R.A. and Zuki, F.S.M. (2015) Putting the tactile feedback to Quranic verses and tajweed rules. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17996-18003. ISSN 18196608

Sulaiman, S.A. and Balamohan, S. and Moni, M.N.Z. and Atnaw, S.M. and Mohamed, A.O. (2015) Feasibility study of gasification of oil palm fronds. Journal of Mechanical Engineering and Sciences, 9. pp. 1744-1757. ISSN 22894659

Suleman, H. and Maulud, A.S. and Man, Z. (2015) Review and selection criteria of classical thermodynamic models for acid gas absorption in aqueous alkanolamines. Reviews in Chemical Engineering, 31 (6). pp. 599-639. ISSN 01678299

Suleman, H. and Nasir, Q. and Maulud, A.S. and Man, Z. (2015) Comparative study of electrolyte thermodynamic models for carbon dioxide solubility in water at high pressure. Chemical Engineering Transactions, 45. pp. 589-594. ISSN 22839216

Suman, S. and Walter, N. and Hussin, F.A. and Malik, A.S. and Ho, S.H. and Goh, K.L. and Hilmi, I. (2015) Optimum colour space selection for ulcerated regions using statistical analysis and classification of ulcerated frames from WCE video footage. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9489. pp. 373-381. ISSN 03029743

Sumra, I.A. and Hasbullah, H.B. and AbManan, J.-L.B. (2015) Attacks on security goals (confidentiality, integrity, availability) in VANET: A survey. Advances in Intelligent Systems and Computing, 306. pp. 51-61. ISSN 21945357

Sundramoorthy, J.D. and Hammonds, P. and Sabil, K.M. and Foo, K.S. and Lal, B. (2015) Macroscopic Observations of Catastrophic Gas Hydrate Growth during Pipeline Operating Conditions with or without a Kinetic Hydrate Inhibitor. Crystal Growth and Design, 15 (12). pp. 5919-5929. ISSN 15287483

Sundramoorthy, J.D. and Sabil, K.M. and Lal, B. and Hammonds, P. (2015) Catastrophic crystal growth of clathrate hydrate with a simulated natural gas system during a pipeline shut-in condition. Crystal Growth and Design, 15 (3). pp. 1233-1241. ISSN 15287483

T

Taha, O.M.A. and Bahrom, M.B. and Taha, O.Y. and Aris, M.S. (2015) Experimental study on two way shape memory effect training procedure for NiTiNOL shape memory alloy. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7847-7851. ISSN 18196608

Taib, S.M. and Bakar, A.A. and Hamdan, A.R. and Abdullah, S.M.S. (2015) Classifying weather time series using featurebased approach. International Journal of Advances in Soft Computing and its Applications, 7 (Specia). pp. 56-71. ISSN 20748523

Talla, G. and Sahoo, D.K. and Gangopadhyay, S. and Biswas, C.K. (2015) Modeling and multi-objective optimization of powder mixed electric discharge machining process of aluminum/alumina metal matrix composite. Engineering Science and Technology, an International Journal, 18 (3). pp. 369-373. ISSN 22150986

Tamidi, A.B.M. and Shaari, K.Z.K. and Ganesan, T. (2015) Reaction modeling for prediction of hydrogen production during biomass gasification. Advanced Structured Materials, 44. pp. 1-16. ISSN 18698433

Tan, L.S. and Shariff, A.M. and Lau, K.K. and Bustam, M.A. (2015) Impact of high pressure on high concentration carbon dioxide capture from natural gas by monoethanolamine/N-methyl-2-pyrrolidone solvent in absorption packed column. International Journal of Greenhouse Gas Control, 34. pp. 25-30. ISSN 17505836

Tasfy, S.F.H. and Zabidi, N.A.M. and Shaharun, M.S. and Subbarao, D. (2015) The influence of Mn, Zr and Pb promoters on the performance of Cu/ZnO/SBA-15 catalyst for hydrogenation of CO2 to methanol. Defect and Diffusion Forum, 365. pp. 178-182. ISSN 10120386

Teo, W. and Hor, Y. (2015) Suitability of optimized truss model to predict the FRP contribution to shear resistance for externally bonded FRP strengthened RC beams without internal stirrups. Composites Part B: Engineering, 80. pp. 385-398. ISSN 13598368

Thangarasu, G. and Dominic, P.D.D. (2015) Diabetic deduction through non-parametric analysis. International Journal of Business Information Systems, 20 (3). pp. 325-347. ISSN 17460972

Ting, H. and Chuah, F. and Cheah, J. and Memon, M.A. and Yacob, Y. (2015) Revisiting attitude towards advertising, its antecedent and outcome: A two-stage approach using PLS-SEM. International Journal of Economics and Management, 9 (2). pp. 150-170. ISSN 1823836X

Traini, C. and Proust, J.-N. and Menier, D. and Mathew, M.J. (2015) Distinguishing natural evolution and human impact on estuarine morpho-sedimentary development: A case study from the Vilaine Estuary, France. Estuarine, Coastal and Shelf Science, 163 (PB). pp. 143-155. ISSN 02727714

Trinh, T.H. and Kushaari, K. and Basit, A. (2015) Modeling the Release of Nitrogen from Controlled-Release Fertilizer with Imperfect Coating in Soils and Water. Industrial and Engineering Chemistry Research, 54 (26). pp. 6724-6733. ISSN 08885885

Trinh, T.H. and Kushaari, K. and Shuib, A.S. and Ismail, L. and Azeem, B. (2015) Modelling the release of nitrogen from controlled release fertiliser: Constant and decay release. Biosystems Engineering, 130. pp. 34-42. ISSN 15375110

Truong, K.H. and Vasant, P. and Sing, M.S.B. and Vo, D.N. (2015) Swarm based mean-variance mapping optimization for solving economic dispatch with cubic fuel cost function. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9012. pp. 3-12. ISSN 03029743

U

Ud Din, I. and Shaharun, M.S. and Subbarao, D. and Naeem, A. (2015) Synthesis, characterization and activity pattern of carbon nanofibers based copper/zirconia catalysts for carbon dioxide hydrogenation to methanol: Influence of calcination temperature. Journal of Power Sources, 274. pp. 619-628. ISSN 03787753

Uemura, Y. and Matsumoto, R. and Saadon, S. and Matsumura, Y. (2015) A study on torrefaction of Laminaria japonica. Fuel Processing Technology, 138. pp. 133-138. ISSN 03783820

Uemura, Y. and Saadon, S. and Osman, N. and Mansor, N. and Tanoue, K.-I. (2015) Torrefaction of oil palm kernel shell in the presence of oxygen and carbon dioxide. Fuel, 144. pp. 171-179. ISSN 00162361

Ullah, H. and Islam, S. and Dennis, L.C.C. and Abdelhameed, T.N. and Khan, I. and Fiza, M. (2015) Approximate solution of two-dimensional nonlinear wave equation by optimal homotopy asymptotic method. Mathematical Problems in Engineering, 2015. ISSN 1024123X

Ullah, R. and Jaafar, J. and Said, A.B.M. (2015) Purify noisy data from annotated images using Montylingua and control redundant term. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 18193-18199. ISSN 18196608

Ullah, R. and Jaafar, J. and Said, A.B.M. and Ullah, I. (2015) Semantic intensity: Objects contributions towards image annotation. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9429. pp. 237-248. ISSN 03029743

Ullah, S. and Bustam, M.A. and Ahmad, F. and Nadeem, M. and Naz, M.Y. and Sagir, M. and Shariff, A.M. (2015) Synthesis and characterization of melamine formaldehyde resins for decorative paper applications. Journal of the Chinese Chemical Society, 62 (2). pp. 182-190. ISSN 00094536

Ullah, S. and Shariff, A.M. and Bustam, M.A. and Nadeem, M. and Naz, M.Y. and Ayoub, M. (2015) Study on effect of benzotriazole and surfactants on corrosion inhibition of copper alloys in sulphuric acid. International Journal of Electrochemical Science, 10 (11). pp. 9443-9455. ISSN 14523981

Ullah, S. and Shariff, A.M. and Bustam, M.A. and Nadeem, M. and Naz, M.Y. and Ayoub, M. (2015) Study on effect of benzotriazole and surfactants on corrosion inhibition of copper alloys in sulphuric acid. International Journal of Electrochemical Science, 10 (10). pp. 8321-8333. ISSN 14523981

Ullah, Z. and Azmi Bustam, M. and Muhammad, N. and Man, Z. and Khan, A.S. (2015) Synthesis and thermophysical properties of hydrogensulfate based acidic ionic liquids. Journal of Solution Chemistry, 44 (3-4). pp. 875-889. ISSN 00959782

Ullah, Z. and Bustam, M.A. and Man, Z. (2015) Biodiesel production from waste cooking oil by acidic ionic liquid as a catalyst. Renewable Energy, 77. pp. 521-526. ISSN 09601481

Ullah, Z. and Bustam, M.A. and Man, Z. and Muhammad, N. and Khan, A.S. (2015) Synthesis, characterization and the effect of temperature on different physicochemical properties of protic ionic liquids. RSC Advances, 5 (87). pp. 71449-71461. ISSN 20462069

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Khamidi, M.F. and Farhan, S.A. and Gardezi, S.S.S. (2015) 4D BIM application in AEC industry: Impact on integrated project delivery. Research Journal of Applied Sciences, Engineering and Technology, 10 (5). pp. 547-552. ISSN 20407459

Ur Rehman, M.Z. and Baharudin, Z. and Zakariya, M.A. and Khir, M.H.M. and Jilani, M.T. (2015) RF MEMS based tunable bandpass filter using QMSIW resonator. Optoelectronics and Advanced Materials, Rapid Communications, 9 (11-12). pp. 1498-1502. ISSN 18426573

Ur Rehman, M.Z. and Baharudin, Z. and Zakariya, M.A. and Khir, M.H.M. and Jilani, M.T. and Khan, M.T. (2015) RF MEMS based half mode bowtie shaped substrate integrated waveguide tunable bandpass filter. Progress In Electromagnetics Research C, 60. pp. 21-30. ISSN 19378718

Usman Dalhatu, D.B. and Abdullah, A. and Ibrahim, Y.M. and Abideen, A.A. (2015) Awareness level of north-west zone of Nigeria retail customers towards Islamic banking. Advanced Science Letters, 21 (5). pp. 1460-1463. ISSN 19366612

V

Vasant, P. and Weber, G.-W. and Barsoum, N. and Dieu, V.N. (2015) Power, control, and optimization. Scientific World Journal, 2015. ISSN 23566140

Vasant, P. and Weber, G.-W. and Dieu, V.N. (2015) Classical and hybrid optimization approaches and their applications in engineering and economics. Mathematical Problems in Engineering, 2015. ISSN 1024123X

Verma, K. and Hasbullah, H. (2015) Bloom-filter based IP-CHOCK detection scheme for denial of service attacks in VANET. Security and Communication Networks, 8 (5). pp. 864-878. ISSN 19390114

W

Wagdy, M. and Faye, I. and Rohaya, D. (2015) Border noise removal from the document image using X-Y cut and filtering technique based on morphological operation. International Journal of Imaging and Robotics, 15 (3). pp. 88-105. ISSN 2231525X

Wagdy, M. and Faye, I. and Rohaya, D. (2015) Document image binarization using retinex and global thresholding. Electronic Letters on Computer Vision and Image Analysis, 14 (1). pp. 61-73. ISSN 15775097

Wai, C.K. and Yusup, S. and Kapor, N.Z.A. and Chok, C. (2015) Catalytic pyrolysis of Oil Palm Frond (OPF) using Graphite Nanofiber (GNF) as catalysts. Chemical Engineering Transactions, 45. pp. 1543-1548. ISSN 22839216

Waris, M. and Liew, M.S. and Faris, M. and Idrus, A. (2015) An exploratory study on enablers and barriers for onsite mechanisation in the Malaysian construction industry. Malaysian Construction Research Journal, 16 (1). pp. 15-30. ISSN 19853807

Wong, M.K. and Bustam, M.A. and Shariff, A.M. (2015) Chemical speciation of CO2 absorption in aqueous monoethanolamine investigated by in situ Raman spectroscopy. International Journal of Greenhouse Gas Control, 39. pp. 139-147. ISSN 17505836

X

Xia, L. and Farooq, M.U. and Bell, I.M. (2015) High level fault modeling of analog circuits through automated model generation using Chebyshev and Newton interpolating polynomials. Analog Integrated Circuits and Signal Processing, 82 (1). pp. 265-283. ISSN 09251030

Y

Ya, H.H. and El-Sobky, H. (2015) An experimental study on the behaviour of glass filled polypropylene and polyethylene composite pipes under quasi-static axial loading. Jurnal Teknologi, 74 (10). pp. 111-119. ISSN 01279696

Yaqub, A. and Isa, M.H. and Ajab, H. (2015) Electrochemical degradation of polycyclic aromatic hydrocarbons in synthetic solution and produced water using a Ti/SnO2-Sb2O5-RuO2 anode. Journal of Environmental Engineering (United States), 141 (4). ISSN 07339372

Yavari, S. and Malakahmad, A. and Sapari, N.B. (2015) Biochar efficiency in pesticides sorption as a function of production variables�a review. Environmental Science and Pollution Research, 22 (18). pp. 13824-13841. ISSN 09441344

Yavari, S. and Malakahmad, A. and Sapari, N.B. (2015) A Review on Phytoremediation of Crude Oil Spills. Water, Air, and Soil Pollution, 226 (8). ISSN 00496979

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2015) Identification of slow drift motions of a truss spar platform using parametric Volterra model. Ocean Engineering, 109. pp. 654-668. ISSN 00298018

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2015) Improving the modeling capacity of Volterra model using evolutionary computing methods based on Kalman smoother adaptive filter. Applied Soft Computing Journal, 35. pp. 695-707. ISSN 15684946

Ye, K.Z. and Kyaw, H.A. and Portnov, E.M. and Bain, A.M. and Vasant, P. (2015) The efficiency of detecting the failures and troubleshooting while applying technical diagnostics for multi-computer systems. Archives of Control Sciences, 25 (1). pp. 87-107. ISSN 12302384

Yiin, C.L. and Yusup, S. and Quitain, A.T. and Uemura, Y. (2015) Physicochemical properties of low transition temperature mixtures in water. Chemical Engineering Transactions, 45. pp. 1525-1530. ISSN 22839216

Yousaf, U. and Shamim, A. and Siddiqui, H. and Raina, M. (2015) Studying the influence of entrepreneurial attributes, subjective norms and perceived desirability on entrepreneurial intentions. Journal of Entrepreneurship in Emerging Economies, 7 (1). pp. 23-34. ISSN 20534604

Yousif, A.A. and Sulaiman, S.A. and Nasif, M.S. (2015) Experimental study on laminar flame speeds and Markstein length of propane air mixtures at atmospheric conditions. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2188-2198. ISSN 22298649

Yu, S.Y. and Choi, H.S. and Lee, S.K. and Park, K.-S. and Kim, D.K. (2015) Nonlinear soil parameter effects on dynamic embedment of offshore pipeline on soft clay. International Journal of Naval Architecture and Ocean Engineering, 7 (2). pp. 227-243. ISSN 20926782

Yusof, Z.A.M. and Ahmed, I. and Khan, M.S. and Hussain, S.A. and Hussain, A. and Mutalib, I.B.A. and Balkhair, K.S. and Albeirutty, M.H. (2015) Thermal Evaluation of Diesel/Hydrogen Peroxide Fuel Blend. Chemical Engineering and Technology, 38 (12). pp. 2170-2180. ISSN 09307516

Yussiff, A.-S. and Ahmad, W.F.W. and Mustapha, E.E. (2015) A constructivist didactics framework for e-collaboration through social media. International Journal of Business Information Systems, 20 (3). pp. 310-324. ISSN 17460972

Yussiff, A.-S. and Wan Ahmad, W.F. and Mustapha, E.E. (2015) Exploring students perceptions of teaching, social, cognitive presences, effectiveness for teamwork and learning outcomes. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 17749-17757. ISSN 18196608

Yusuf, N.R. and Kamil, R.N.M. and Yusup, S. (2015) Response surface methodology approach for optimisation of alkaline hydrolysis of Jatropha Curcas oil via microwave assisted. Chemical Engineering Transactions, 45. pp. 1513-1518. ISSN 22839216

Yusup, S. and Bokhari, A. and Chuah, L.F. and Ahmad, J. (2015) Pre-blended methyl esters production from crude palm and rubber seed oil via hydrodynamic cavitation reactor. Chemical Engineering Transactions, 43. pp. 517-522. ISSN 22839216

Z

Zafar, R. and Malik, A.S. and Amin, H.U. and Kamel, N. and Dass, S.C. (2015) Discrimination of brain states using wavelet and power spectral density. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9492. pp. 341-347. ISSN 03029743

Zafar, R. and Malik, A.S. and Kamel, N. and Dass, S.C. and Abdullah, J.M. and Reza, F. and Abdul Karim, A.H. (2015) Decoding of visual information from human brain activity: A review of fMRI and EEG studies. Journal of Integrative Neuroscience, 14 (2). pp. 155-168. ISSN 02196352

Zahari, A. and Jaafar, J. (2015) Combining Hidden Markov Model and case based reasoning for time series forecasting. Communications in Computer and Information Science, 513. pp. 237-247. ISSN 18650929

Zainal A., E.Z. and Ibrahim, A.A. and Aziz, A.R.A. and Zulkifli, S.A. (2015) Effect of motoring voltage on compression ratio of a free-piston linear generator engine. Journal of Mechanical Engineering and Sciences, 8. pp. 1393-1400. ISSN 22894659

Zakaria, M.S. and Hassan, S. and Nor, M.F.M. (2015) Calorific value of the sewage sludge in the thermal dryer. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10245-10248. ISSN 18196608

Zamin, N. and Bakar, Z.A. (2015) Name entity recognition for malay texts using cross-lingual annotation projection approach. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9155. pp. 242-256. ISSN 03029743

Zamri, N.H. and Ismail, L. and Abdul Rahim, R.H. and Siyal, A.A. and Man, Z. and Azizli, K.A. (2015) Kinetics of geopolymer solidification study using texture analyzer. Materials Science Forum, 803. pp. 75-80. ISSN 02555476

Zangeneh, H. and Zinatizadeh, A.A.L. and Habibi, M. and Akia, M. and Hasnain Isa, M. (2015) Photocatalytic oxidation of organic dyes and pollutants in wastewater using different modified titanium dioxides: A comparative review. Journal of Industrial and Engineering Chemistry, 26. pp. 1-36. ISSN 1226086X

Zarif, S. and Faye, I. and Rohaya, D. (2015) Image completion based on statistical texture analysis. Journal of Electronic Imaging, 24 (1). ISSN 10179909

Zarif, S. and Faye, I. and Rohaya, D. (2015) Image completion: Survey and comparative study. International Journal of Pattern Recognition and Artificial Intelligence, 29 (3). ISSN 02180014

Zulkarnain, N.F. and Ibrahim, T. and Hashim, H.Z. (2015) Design and modelling of electrical machine for ceiling fan system. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10174-10183. ISSN 18196608

Zulkefli, N.A.M. and Baharudin, B. (2015) Travel recommendation system based on trust using hybrid neuro-fuzzy: A study of potential trust in blog and Facebook. International Journal of Business Information Systems, 20 (3). pp. 289-309. ISSN 17460972

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2015) Operation and control of split-parallel, through-theroad hybrid electric vehicle with in-wheel motors. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2793-2808. ISSN 22298649