A

Ab Ghafar, M.I. and Ibrahim, R. and Mazlan, Z. (2012) Development and implementation of hybrid controllers for flow control application. Sensors and Transducers, 17 (SPL 12). pp. 110-124. ISSN 17265479

Abba, H.A. and Zakaria, N.B. and Pal, A.J. and Naono, K. (2012) Performance Comparison of Some Hybrid Deadline Based Scheduling Algorithms for Computational Grid. Communications in Computer and Information Science, 344. pp. 19-30. ISSN 18650929

Abd, T.H. and Aljunid, S.A. and Fadhil, H.A. and Ahmad, R.A. and Saad, N.M. (2012) Design and simulation a new code with zero cross-correlation for SAC-OCDMA networks. Australian Journal of Basic and Applied Sciences, 6 (3). pp. 112-119. ISSN 19918178

Abd, T.H. and Aljunid, S.A. and Fadhil, H.A. and Junita, M.N. and Saad, N.M. (2012) Modelling and simulation of a 1.6 Tb/s optical system based on multi-diagonal code and optical code-division multiple-access. Ukrainian Journal of Physical Optics, 13 (2). pp. 54-66. ISSN 16091833

Abd, T.H. and Aljunid, S.A. and Fadhil, H.A. and Radhi, I.F. and Saad, N.M. (2012) Performance evaluation of hybrid SCM/SACOCDMA transmissions system using dynamic cyclic shift code. Journal of Optical Communications, 33 (4). pp. 279-283. ISSN 01734911

Abdalla, M.O. and Nagarajan, T. and Hashim, F.M. (2012) Improvement of actuation speed of hydraulic cylinders: Using novel flow control valve system. Communications in Computer and Information Science, 330 CC. pp. 331-339. ISSN 18650929

Abdul Aziz, Z. and Nazari, M. and Salah, F. and Ching, D.L.C. (2012) Constant accelerated flow for a third-grade fluid in a porous medium and a rotating frame with the homotopy analysis method. Mathematical Problems in Engineering, 2012. ISSN 1024123X

Abidin, E.Z.Z. and Ibrahim, A.A. and Aziz, A.R.A. and Zulkifli, S.A. (2012) Investigation of starting behaviour of a free-piston linear generator. Journal of Applied Sciences, 12 (24). pp. 2592-2597. ISSN 18125654

Adkham, Y. and Kutty, M.G. and Siew, P.L. and Shaharun, M.Sh. and Hamid, S.B.A. and Piven, V. (2012) Comparison of cobalt based catalysts supported on MWCNT and SBA- 15 supporters for fischer-tropsch synthesis by using autoclave type reactor. Advanced Materials Research, 364. pp. 70-75. ISSN 10226680

Affam, A.C. and Chaudhuri, M. and Kutty, S.R.M. (2012) Fenton treatment of chlorpyrifos, cypermethrin and chlorothalonil pesticides in aqueous solution. Journal of Environmental Science and Technology, 5 (6). pp. 407-418. ISSN 19947887

Agos, M.F. and Muhamad, N.A. (2012) Flashover phenomena prevention during gis installation using image processing technique. International Review on Computers and Software, 7 (1). pp. 158-161. ISSN 18286003

Ahmad, F. and Dennis, J.O. and Md Khir, M.H. and Hamid, N.H. (2012) A CMOS MEMS resonant magnetic field sensor with differential electrostatic actuation and capacitive sensing. Advanced Materials Research, 403-40. pp. 4205-4209. ISSN 10226680

Ahmad, F. and Dennis, J.O. and Md Khir, M.H. and Hamid, N.H. (2012) Modeling and layout design of resonant lateral comb magnetic sensor. Sensors and Transducers, 17 (SPL 12). pp. 1-12. ISSN 17265479

Ahmad, F. and Lau, K.K. and Shariff, A.M. and Murshid, G. (2012) Process simulation and optimal design of membrane separation system for CO 2 capture from natural gas. Computers and Chemical Engineering, 36 (1). pp. 119-128. ISSN 00981354

Ahmad, F. and Muhsan, A.S. and Raza, M.R. (2012) Rheological behavior of carbon nanotubes/ copper feedstocks for metal injection molding. Advanced Materials Research, 403-40. pp. 5335-5340. ISSN 10226680

Ahmad, F. and Ullah, S. and Hamizol, M.S. (2012) To study the effect of Aluminium Trihydrate and fumed silica on intumescent fire retardant coating. Journal of Applied Sciences, 12 (24). pp. 2631-2635. ISSN 18125654

Ahmad, I. and Sulaiman, S. (2012) Area based adaptive subdivision of a triangular mesh for visio haptic deformation. Information Technology Journal, 11 (1). pp. 171-175. ISSN 18125638

Ahmad, M.R. and Md Khir, M.H. (2012) Trapezoidal electrodes array for electret-based electrostatic energy harvester. Sensors and Transducers, 17 (SPL 12). pp. 186-198. ISSN 17265479

Ahmad, T. and Mamat, O. and Ahmad, R. (2012) Physico-mechanical properties of sintered iron-silica sand nanoparticle composites: A preliminary study. Defect and Diffusion Forum, 332. pp. 7-16. ISSN 10120386

Ahmada, T. and Mamat, O. (2012) Tronoh silica sand nanoparticle production and applications design for composites. Defect and Diffusion Forum, 330. pp. 39-47. ISSN 10120386

Ahmed, A.-H.M. and Zakaria, M.N. and Metwally, N. (2012) Teleportation in the presence of technical defects in transmission stations. Applied Mathematics and Information Sciences, 6 (3). pp. 781-787. ISSN 19350090

Ahmed, A.Y. and Dennis, J.O. and Md Khir, M.H. and Mohamad Saad, M.N. and Buyong, M.R. (2012) Design, simulation and fabrication of a mass sensitive CMOS-MEMS resonator. Sensors and Transducers, 17 (SPL 12). pp. 40-49. ISSN 17265479

Ahmed, H.Y. and Almaleeh, M. and Fadhil, H. and Aljunid, S.A. and Babiker, A.E. and Saad, N.M. (2012) Performance analysis of optical CDMA system using VC code family under various optical parameters. Journal of Engineering Science and Technology, 7 (3). pp. 303-321. ISSN 18234690

Ahmed, H.Y. and Almaleeh, M. and Fadhil, H. and Aljunid, S.A. and Elyass, A. and Saad, N.M. (2012) Performance analysis of spectral-amplitude-coding optical CDMA systems with new subtract exclusive or detection (SED) using vectors combinatorial (VC) code. Optik, 123 (15). pp. 1352-1359. ISSN 00304026

Ahmed, M.S.A.M.S. and Ul-Haq Gilani, S.I. (2012) Exergy analysis of a double-effect parallel-flow commercial steam absorption chiller. Journal of Applied Sciences, 12 (24). pp. 2580-2585. ISSN 18125654

Ahmed, S. and Abdullah, A. and Raja, M.Y.A. (2012) Cyber Security: Vulnerabilities and Solutions for Telemedicine over Cloud Architectures. Communications in Computer and Information Science, 293 PA. pp. 197-207. ISSN 18650929

Ahmed, T.Y. and Ahmad, M.M. and Lam, H.L. and Yusup, S. (2012) Residual minimization approach for kinetics parameter estimation for hydrogen production from gasification of palm kernel shell. Chemical Engineering Transactions, 29. pp. 883-888. ISSN 22839216

Ahmed, T.Y. and Ahmad, M.M. and Yusup, S. and Inayat, A. and Khan, Z. (2012) Mathematical and computational approaches for design of biomass gasification for hydrogen production: A review. Renewable and Sustainable Energy Reviews, 16 (4). pp. 2304-2315. ISSN 13640321

Akbar, M.M. and Murugesan, T. (2012) Thermophysical properties for the binary mixtures of 1-hexyl-3- methylimidazolium bis(trifluoromethylsulfonyl)imide hmimTf 2N + N-methyldiethanolamine (MDEA) at temperatures (303.15 to 323.15) K. Journal of Molecular Liquids, 169. pp. 95-101. ISSN 01677322

Akbar, R. and Hassan, M.F. and Abdullah, A. and Babar, M.E. and Safdar, S. (2012) A road map for implementing service oriented agricultural information management system. Journal of Animal and Plant Sciences, 22 (3). pp. 802-805. ISSN 10187081

Akhbari, A. and Zinatizadeh, A.A.L. and Mohammadi, P. and Mansouri, Y. and Irandoust, M. and Isa, M.H. (2012) Kinetic modeling of carbon and nutrients removal in an integrated rotating biological contactor-activated sludge system. International Journal of Environmental Science and Technology, 9 (2). pp. 371-378. ISSN 17351472

Al-Kayeim, H.H. and Salih, T.W. and Govindasamy, D. (2012) Coupled analytical-numerical procedure to solve the double wedge spiked supersonic intake flow field. Applied Mechanics and Materials, 225. pp. 67-72. ISSN 16609336

Al-Kayiem, H.H. and Alhamdo, M.H. (2012) Thermal behavior of encapsulated phase change material energy storage. Journal of Renewable and Sustainable Energy, 4 (1). ISSN 19417012

Al-Kayiem, H.H. and Badri, T.M. (2012) Transient analysis of structronics shell. Communications in Computer and Information Science, 330 CC. pp. 313-321. ISSN 18650929

Al-Kayiem, H.H. and Hon, T.F. (2012) CFD simulation of the intermediate passage of gas turbine with energy promoters. Journal of Applied Sciences, 12 (24). pp. 2511-2518. ISSN 18125654

Al-Mossawy, M.I. and Demiral, B. (2012) Duration of the transient pressure of liquid core flooding. Journal of Geophysics and Engineering, 9 (1). pp. 75-81. ISSN 17422132

Al-Wakeel, H.B. and Abdul Karim, Z.A. and Al-Kayiem, H.H. (2012) Soot reduction strategy: A review. Journal of Applied Sciences, 12 (23). pp. 2338-2345. ISSN 18125654

Alanezi, M.A. and Mahmood, A.K. and Basri, S. (2012) E-government service quality: A qualitative evaluation in the case of Saudi Arabia. Electronic Journal of Information Systems in Developing Countries, 54 (1). ISSN 16814835

Alhassan, A.M. and Saad, N.M. and Badruddin, N. (2012) Author's reply. IEEE Photonics Technology Letters, 24 (15). p. 1358. ISSN 10411135

Ali, A. and Majid, M.A.A. and Muhammad, M. (2012) Comparative study between degradation analysis and API 510 remaining life evaluation method for feed gas filter vessel reliability analysis. Journal of Applied Sciences, 12 (23). pp. 2448-2453. ISSN 18125654

Ali, M. and Jaafar, A.N. and Kamaruddin, I. and Rahman, H.A. (2012) Construction quality of school buildings using the industrialised building systEM (IBS). Malaysian Construction Research Journal, 11 (2). pp. 21-35. ISSN 19853807

Ali, N. and El-Harbawi, M. and Jabal, A.A. and Yin, C.-Y. (2012) Characteristics and oil sorption effectiveness of kapok fibre, sugarcane bagasse and rice husks: Oil removal suitability matrix. Environmental Technology, 33 (4). pp. 481-486. ISSN 09593330

Ali, S. and Mohd Zabidi, N.A. and Subbarao, D. (2012) Synthesis and characterization of bimetallic Fe/Co nanocatalyst on CNTs for Fischer-Tropsch reaction. Journal of Nano Research, 16. pp. 9-14. ISSN 16625250

Ali, S. and Mohd Zabidi, N.A. and Subbarao, D. (2012) Synthesis and characterization of γ-alumina-supported cobalt and iron nanocatalysts. Advanced Materials Research, 545. pp. 129-136. ISSN 10226680

Ali, S. and Zabidi, N.A.M. and Subbarao, D. (2012) Effect of niobium promoter on iron-based catalyst for Fischer-Tropsch reaction. Ranliao Huaxue Xuebao/Journal of Fuel Chemistry and Technology, 40 (1). pp. 48-53. ISSN 2097213X

Alsaade, F. and Zaman, N. and Abdullah, A. and Dawood, M.Z. (2012) Enhancing surveillance and security of oil pipelines transportation using wireless sensor network. Middle East Journal of Scientific Research, 11 (8). pp. 1029-1035. ISSN 19909233

Amir, N. and Ahmad, F. and Megat-Yusoff, P.S.M. (2012) Mechanisms of char strengthening in the fibre reinforced intumescent coatings. Journal of Applied Sciences, 12 (23). pp. 2459-2463. ISSN 18125654

Anbese, Y.T. and Aziz, A.R.A. and Heikal, M.R. (2012) Characteristics of induction flow in SI direct injection engine with dual variable Swirl Control Valve. Journal of Applied Sciences, 12 (24). pp. 2534-2540. ISSN 18125654

Aparow, V.R. and Ahmad, F. and Hassan, M.Z. and Hudha, K. (2012) Development of antilock braking system based on various intelligent control system. Applied Mechanics and Materials, 229-23. pp. 2394-2398. ISSN 16609336

Armi, N. and Arshad, M. and Rizvi, S.S.A. and Yusoff, M.Z. and Saad, N.M. (2012) Performance of opportunistic spectrum access with sensing error in cognitive radio Ad hoc networks. Journal of Engineering Science and Technology, 7 (2). pp. 142-155. ISSN 18234690

Asfaw, T.D. and Hashim, A.M. (2012) Development of cascade hydropower reservoirs operating system rule using refill and deplete ranking orders. Advanced Materials Research, 433-44. pp. 1735-1739. ISSN 10226680

Ashraf, K. and Khir, M.H.M. and Dennis, J.O. (2012) Analytical investigation of frequency dependence of average power of a vibration energy harvester. Sensors and Transducers, 17 (SPL 12). pp. 176-185. ISSN 17265479

Ashraf, K. and Md Khir, M.H. and Dennis, J.O. (2012) An electromagnetic frequency increased vibration energy harvester. Advanced Materials Research, 403-40. pp. 4231-4234. ISSN 10226680

Asirvadam, V.S. and Izzeldin, H.T.A. and Saad, N. and Mcloone, S.F. (2012) Semi batch learning with store management using enhanced conjugate gradient. Lecture Notes in Electrical Engineering, 136 LN. pp. 61-67. ISSN 18761100

Aslam, N. and Ullah, I. and Rohullah and Shams, B. and Akram, T. and Shabir, M. (2012) Tracking the progression of multimedia semantics: From text based retrieval to semantic based retrieval. World Applied Sciences Journal, 20 (4). pp. 549-553. ISSN 18184952

Asmara, Y.P. and Ismail, M.C. (2012) Efficient design of response surface experiment for corrosion prediction in CO 2 environments. Corrosion Engineering Science and Technology, 47 (1). pp. 10-18. ISSN 1478422X

Asmelash, G.M. and Mamat, O. (2012) Pressureless sintering and characterization of Al2O 3-SiO2-ZrO2 composite. Defect and Diffusion Forum, 329. pp. 113-128. ISSN 10120386

Asmelash, G.M. and Mamat, O. (2012) Processing and characterisation of Al2O3-SiO 2-ZrO2 composite material. International Journal of Microstructure and Materials Properties, 7 (1). pp. 64-76. ISSN 17418410

Asmelash, G.M. and Mamat, O. and Ahmad, F. (2012) Toughening mechanisms of Al2O3-SiO 2-ZrO2 composite materials. Ceramics - Silikaty, 56 (4). pp. 360-366. ISSN 08625468

Assaad, M. and Alser, M.H. (2012) Design of an all-digital synchronized frequency multiplier based on a dual-loop (D/FLL) architecture. VLSI Design, 2012. ISSN 1065514X

Awang, M. and Othman, M.H. and Shaari, K.Z.K. and Wichi, M.N. (2012) Microstructure and mechanical properties evaluations of heat treated dissimilar metal joint weldment between API 5CT C90 and ASTM A182 F22. Defect and Diffusion Forum, 326-32. pp. 335-340. ISSN 10120386

Ayaz, M. and Abdullah, A. and Faye, I. and Batira, Y. (2012) An efficient Dynamic Addressing based routing protocol for Underwater Wireless Sensor Networks. Computer Communications, 35 (4). pp. 475-486. ISSN 01403664

Aziz, M.A. and Sabil, K.M. and Uemura, Y. and Ismail, L. (2012) A study on torrefaction of oil palm biomass. Journal of Applied Sciences, 12 (11). pp. 1130-1135. ISSN 18125654

Azmi, B.M. and Hasanaly, S.M. and Zakaria, M. (2012) Mesoporous tin phosphate as anode material for lithium-ion cells. Advanced Materials Research, 545. pp. 175-181. ISSN 10226680

Azmi Adly, M. and Elamvazuthi, I. and Begamm, K.M. (2012) Control algorithms for biped robot with h oeterogeneous leg (BRHL). Australian Journal of Basic and Applied Sciences, 6 (3). pp. 65-75. ISSN 19918178

B

Badri, T.M. and Al-Kayiem, H.H. (2012) Dynamic responses of magneto-thermo-electro-elastic shell structures with closed-circuit surface condition. Journal of Applied Sciences, 12 (24). pp. 2541-2547. ISSN 18125654

Badri, T.M. and Al-Kayiem, H.H. (2012) Free vibration analysis of structronics shell. Communications in Computer and Information Science, 330 CC. pp. 322-330. ISSN 18650929

Baig, I. and Jeoti, V. (2012) PAPR reduction in 4G cellular network: A SLM-based IFDMA uplink system. Proceedings of the Pakistan Academy of Sciences, 49 (2). pp. 79-84. ISSN 03772969

Baig, I. and Jeoti, V. (2012) PAPR reduction in mobile WiMAX: A new ZCMT precoded random interleaved OFDMA system. Journal of Central South University of Technology (English Edition), 19 (4). pp. 988-993. ISSN 10059784

Baig, I. and Jeoti, V. (2012) Papr Reduction in Layered-OFDMA of LTE-A: A New Precoding Based Adaptive Uplink Ra System. Journal of Engineering Science and Technology, 7 (1). pp. 131-141. ISSN 18234690

Bakhit, A.A. and Wong, P.W. (2012) A novel single and dual-band miniaturized matched band-stop filter using stepped impedance resonator. Progress In Electromagnetics Research C, 33. pp. 229-241. ISSN 19378718

Bakhsh, S.T. and Hasbullah, H. and Tahir, S. (2012) Dynamic relay management protocol for efficient inter-piconet scheduling in Bluetooth scatternet. Computers and Electrical Engineering, 38 (3). pp. 626-642. ISSN 00457906

Basheer, F. and Isa, M.H. and Farooqi, I.H. (2012) Biodegradation of o-nitrophenol by aerobic granules with glucose as co-substrate. Water Science and Technology, 65 (12). pp. 2132-2139. ISSN 02731223

Batcha, M.F.M. and Sulaiman, S.A. and Raghavan, V.R. (2012) Hydrodynamics of oil palm frond in a swirling fluidized bed dryer. Applied Mechanics and Materials, 117-11. pp. 1829-1833. ISSN 16609336

Belusko, M. and Halawa, E. and Bruno, F. (2012) Characterising PCM thermal storage systems using the effectiveness-NTU approach. International Journal of Heat and Mass Transfer, 55 (13-14). pp. 3359-3365. ISSN 00179310

Borhan, A. and Kamil, A.F. (2012) Preparation and characterization of activated carbon from rubber-seed shell by chemical activation. Journal of Applied Sciences, 12 (11). pp. 1124-1129. ISSN 18125654

Bt Hairudin, W.M. and Awang, M.B. (2012) Prelimenary study on thermomechanical modelling of cutting process. Advanced Materials Research, 383-39. pp. 6741-6746. ISSN 10226680

C

Chandara, C. and Mohd Azizli, K.A. and Ahmad, Z.A. and Saiyid Hashim, S.F. and Sakai, E. (2012) Heat of hydration of blended cement containing treated ground palm oil fuel ash. Construction and Building Materials, 27 (1). pp. 78-81. ISSN 09500618

Chaudhuri, M. and Azizan, N.K.B. (2012) Adsorptive removal of chromium(VI) from aqueous solution by an agricultural waste-based activated carbon. Water, Air, and Soil Pollution, 223 (4). pp. 1765-1771. ISSN 00496979

Cheab, S. and Wong, P.W. (2012) Design and synthesis of quasi-elliptic triple mode filter. Progress in Electromagnetics Research Letters, 33. pp. 83-89. ISSN 19376480

Chin, S.C. and Shafiq, N. and Nuruddin, M.F. (2012) Strengthening of RC beams with large openings in shear by CFRP laminates: Experiment and 2D nonlinear finite element analysis. Research Journal of Applied Sciences, Engineering and Technology, 4 (9). pp. 1172-1180. ISSN 20407459

Cossa, N.J. and Potty, N.S. and Idrus, A.B. and Hamid, M.F.A. and Nizamani, Z. (2012) Reliability analysis of jacket platforms in Malaysia-environmental load factors. Research Journal of Applied Sciences, Engineering and Technology, 4 (19). pp. 3544-3551. ISSN 20407459

D

Daffalla, S.B. and Mukhtar, H. and Shaharun, M.S. (2012) Properties of activated carbon prepared from rice husk with chemical activation. International Journal of Global Environmental Issues, 12 (2-4). pp. 107-129. ISSN 14666650

Danyaro, K.U. and Jaafar, J. and Liew, M.S. (2012) Completeness knowledge representation in fuzzy description logics. Communications in Computer and Information Science, 295 CC. pp. 164-173. ISSN 18650929

Daud, H. and Akhtar, M.N. and Yahya, N. and Nasir, N. and Soleimani, H. (2012) Effect of frequency on hydrocarbon (HC) detection using 3D finite integral modeling. Defect and Diffusion Forum, 326-32. pp. 654-661. ISSN 10120386

Debebe Woldeyohannes, A. and Abd Majid, M.A. (2012) Analogical approach for optimizing natural gas transmission pipeline network system. Advanced Materials Research, 361-36. pp. 966-973. ISSN 10226680

Dehzangi, A. and Larki, F. and Hutagalung, S.D. and Saion, E.B. and Abdullah, A.M. and Hamidon, M.N. and Majlis, B.Y. and Kakooei, S. and Navaseri, M. and Kharazmi, A. (2012) Numerical investigation and comparison with experimental characterisation of side gate p-type junctionless silicon transistor in pinch-off state. Micro and Nano Letters, 7 (9). pp. 981-985. ISSN 17500443

Dhole, C.K. and Nanda, A. and Kargupta, K. and Ganguly, S. (2012) Synthesis, characterization and performance study of phosphosilicate gel-sulfonated poly (ether ether ketone) nanocomposite membrane for fuel cell application. Journal of Nano- and Electronic Physics, 4 (1). pp. 1-4. ISSN 20776772

E

Eisakhani, M. and Abdullah, M.P. and Karim, O.A. and Malakahmad, A. (2012) Validation of MIKE 11 model simulated data for biochemical and chemical oxygen demands transport. American Journal of Applied Sciences, 9 (3). pp. 382-387. ISSN 15469239

Eisakhani, M. and Pauzi, A. and Karim, O.A. and Malakahmad, A. (2012) Conceptual approaches to improving water quality of rivers in cameron highlands, Malaysia. Journal of Sustainability Science and Management, 7 (2). pp. 213-219. ISSN 18238556

El-Harbawi, M. and Shaaran, S.N.A.B. and Ahmad, F. and Wahi, M.A.A. and Abdul, A. and Laird, D.W. and Yin, C.-Y. (2012) Estimating the flammability of vapours above refinery wastewater laden with hydrocarbon mixtures. Fire Safety Journal, 51. pp. 61-67. ISSN 03797112

El-Khatib, N.A.F. (2012) Waterflooding performance in inclined communicating stratified reservoirs. SPE Journal, 17 (1). pp. 31-42. ISSN 1086055X

El-Khatib, N.A.F. (2012) The modification of the Dykstra-parsons method for inclined stratified reservoirs. SPE Journal, 17 (4). pp. 1029-1040. ISSN 1086055X

Elkhalifah, A.E.I. and Maitra, S. and Bustam, M.A. and Murugesan, T. (2012) Thermogravimetric analysis of different molar mass ammonium cations intercalated different cationic forms of montmorillonite. Journal of Thermal Analysis and Calorimetry, 110 (2). pp. 765-771. ISSN 13886150

Elmolla, E.S. and Chaudhuri, M. (2012) The feasibility of using combined Fenton-SBR for antibiotic wastewater treatment. Desalination, 285. pp. 14-21. ISSN 00119164

Elmolla, E.S. and Ramdass, N. and Chaudhuri, M. (2012) Optimization of sequencing batch reactor operating conditions for treatment of high-strength pharmaceutical wastewater. Journal of Environmental Science and Technology, 5 (6). pp. 452-459. ISSN 19947887

Elraies, K.A. (2012) An experimental study on ASP process using a new polymeric surfactant. Journal of Petroleum Exploration and Production Technology, 2 (4). pp. 223-227. ISSN 21900558

Estournès, G. and Menier, D. and Guillocheau, F. and Le Roy, P. and Paquet, F. and Goubert, E. (2012) The paleo-Etel River incised valley on the Southern Brittany inner shelf (Atlantic coast, France): Preservation of Holocene transgression within the remnant of a middle Pleistocene incision? Marine Geology, 329-33. pp. 75-92. ISSN 00253227

Ezechi, E.H. and Isa, M.H. and Mohamed Kutty, S.R.B. (2012) Boron in produced water: Challenges and improvements: A comprehensive review. Journal of Applied Sciences, 12 (5). pp. 402-415. ISSN 18125654

F

Faizal, M. and Seri, S.M. and Al-Hafiz, M. and Raghavan, V.R. (2012) CFD studies on velocity distribution of air in a swirling fluidized bed. Advanced Materials Research, 468-47. pp. 25-29. ISSN 10226680

Farooq, M. and Ramli, A. and Subbarao, D. (2012) Evaluation of the physiochemical properties of molybdenum supported catalysts. Advanced Materials Research, 488-48. pp. 206-210. ISSN 10226680

Farooq, M. and Ramli, A. and Subbarao, D. (2012) Physiochemical properties of γ-Al 2O 3-MgO and γ-Al 2O 3-CeO 2 composite oxides. Journal of Chemical and Engineering Data, 57 (1). pp. 26-32. ISSN 00219568

Fayek, H.M. and Elamvazuthi, I. (2012) Type-2 fuzzy logic PI (T2FLPI) based dc servomotor control. Journal of Applied Sciences Research, 8 (5). pp. 2564-2574. ISSN 1816157X

Fazal, I. and Karsiti, M.N. and Rama Rao, K.S. and Zulkifli, S.A. (2012) Modeling and simulation of moving iron linear generator (MILG). Applied Mechanics and Materials, 110-11. pp. 2464-2468. ISSN 16609336

Fazal, I. and Rama Rao, K.S. and Karsiti, M.N. (2012) Modeling and simulation of a moving-coil linear generator. Applied Mechanics and Materials, 110-11. pp. 2458-2463. ISSN 16609336

G

Ganesan, T. and Awang, M. (2012) Large Eddy Simulation (LES) of a steady turbulent flow over a surface-mounted cube. CFD Letters, 4 (1). pp. 1-10. ISSN 21801363

Ganesan, T. and Vasant, P. and Elamvazuthy, I. (2012) A hybrid PSO approach for solving non-convex optimization problems. Archives of Control Sciences, 22 (1). pp. 87-105. ISSN 12302384

Ganguly, S. and Das, S. and Kargupta, K. and Bannerjee, D. (2012) Optimization of Performance of Phosphoric Acid Fuel Cell (PAFC) Stack using Reduced Order Model with Integrated Space Marching and Electrolyte Concentration Inferencing. Computer Aided Chemical Engineering, 31. pp. 1010-1014. ISSN 15707946

Getu, M. and Mahadzir, S. and Lee, M. (2012) Analyzing the effects of uncertainties on the economic performance of a chemical process plant using a probabilistic optimization technique. Computer Aided Chemical Engineering, 30. pp. 832-836. ISSN 15707946

Ghazali, Z. and Amin Abd Majid, M. and Shazwani, M. (2012) Optimal solution of transportation problem using linear programming: A case of a Malaysian trading company. Journal of Applied Sciences, 12 (23). pp. 2430-2435. ISSN 18125654

Ghazali, Z. and Halib, M. (2012) Productivity-based group incentive scheme: A human resource strategy for competitive advantage in a Malaysian manufacturing company. European Journal of Social Sciences, 28 (1). pp. 101-108. ISSN 14502267

Ghazali, Z. and Halib, M. (2012) Technological onslaught and the demise of a dedicated manufacturing plant. European Journal of Social Sciences, 27 (4). pp. 580-587. ISSN 14502267

Ginta, T.L. and Nurul Amin, A.K.M. and Lajis, M.A. (2012) Suppressed vibrations during thermal-assisted machining of titanium alloy Ti-6A1-4V using PCD inserts. Journal of Applied Sciences, 12 (23). pp. 2418-2423. ISSN 18125654

Griffiths, J.F. and Piazzesi, R. and Sazhina, E.M. and Sazhin, S.S. and Glaude, P.-A. and Heikal, M.R. (2012) CFD modelling of cyclohexane auto-ignition in an RCM. Fuel, 96. pp. 192-203. ISSN 00162361

Guangul, F.M. and Sulaiman, S.A. and Ramli, A. (2012) Gasifier selection, design and gasification of oil palm fronds with preheated and unheated gasifying air. Bioresource Technology, 126. pp. 224-232. ISSN 09608524

H

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. and Firmansyah (2012) Combustion characteristics of late injected CNG in a spark ignition engine under lean operating condition. Journal of Applied Sciences, 12 (23). pp. 2368-2375. ISSN 18125654

Hailegiorgis, S.M. and Mahadzir, S. and Subbarao, D. (2012) In situ transesterification of non-edible oil in the presence of cetyltrimethylammonium bromide. International Journal of Global Environmental Issues, 12 (2-4). pp. 161-170. ISSN 14666650

Halawa, E. and Van Hoof, J. (2012) The adaptive approach to thermal comfort: A critical overview. Energy and Buildings, 51. pp. 101-110. ISSN 03787788

Hamada, K.I. and Rahman, M.M. and Aziz, A.R.A. (2012) Development of a computational fluid dynamics model for direct injection hydrogen fueled engine. International Review of Mechanical Engineering, 6 (3). pp. 675-679. ISSN 19708734

Hamada, K.I. and Rahman, M.M. and Aziz, A.R.A. (2012) Influence of engine speed and mixture strength on instantaneous heat transfer for direct injection hydrogen fuelled engine. Energy Education Science and Technology Part A: Energy Science and Research, 30 (SPEC .). pp. 153-172. ISSN 1308772X

Hamada, K.I. and Rahman, M.M. and Aziz, A.R.A. (2012) Multidimensional computational modeling of direct injection for hydrogen fueled engine. Advanced Science Letters, 13. pp. 317-321. ISSN 19366612

Hamada, K.I. and Rahman, M.M. and Aziz, A.R.A. (2012) Time-averaged heat transfer correlation for direct injection hydrogen fueled engine. International Journal of Hydrogen Energy, 37 (24). pp. 19146-19157. ISSN 03603199

Hamzah, A.A. and Hasan, N. and Takriff, M.S. and Kamarudin, S.K. and Abdullah, J. and Tan, I.M. and Sern, W.K. (2012) Effect of oscillation amplitude on velocity distributions in an oscillatory baffled column (OBC). Chemical Engineering Research and Design, 90 (8). pp. 1038-1044. ISSN 02638762

Hani, A.F.M. and Eltegani, N.M. and Arshad, L. and Hussein, S.H. and Jamil, A. and Gill, P. (2012) Wound model reconstruction from three-dimensional skin surface imaging using the convex hull approximation method. IET Image Processing, 6 (5). pp. 521-533. ISSN 17519659

Harimurti, S. and Rahmah, A.U. and Omar, A.A. and Murugesan, T. (2012) Application of response surface method in the degradation of wastewater containing MDEA using UV/H2O2 advanced oxidation process. Journal of Applied Sciences, 12 (11). pp. 1093-1099. ISSN 18125654

Haruman, E. and Sun, Y. and Triwiyanto, A. and Manurung, Y.H.P. and Adesta, E.Y. (2012) An investigation on low-temperature thermochemical treatments of austenitic stainless steel in fluidized bed furnace. Journal of Materials Engineering and Performance, 21 (3). pp. 388-394. ISSN 10599495

Hassan, S. and Khosravi, A. and Jaafar, J. and Belhaouari, S.B. (2012) Load forecasting accuracy through combination of trimmed forecasts. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7663 L (PART 1). pp. 152-159. ISSN 03029743

Heng, G.C. and Elmolla, E.S. and Chaudhuri, M. (2012) Optimization of photo-fenton treatment of mature landfill leachate. Nature Environment and Pollution Technology, 11 (1). pp. 65-72. ISSN 09726268

Hermana, M. and Azhar, H.H.B.M. and Harith, Z.Z.T. (2012) A new algorithm to estimate attenuation using frequency shift methods. Sains Malaysiana, 41 (8). pp. 953-959. ISSN 01266039

Hong, S.S.B. and Ibrahim, R. and Md Khir, M.H. and Zakariya, M.A. and Daud, H. (2012) RF energy harvester: Harvesting power from WiFi signals for low power RFID application. Sensors and Transducers, 17 (SPL 12). pp. 168-175. ISSN 17265479

Hussin, H. and Hashim, F.M. and Mokhtar, A.A. (2012) Systematic approach to maintainability analysis at operational phase. Journal of Applied Sciences, 12 (24). pp. 2562-2567. ISSN 18125654

I

Ibrahim, I. and Rani, A.M.A. and Zainuddin, A. and Anua, M.R.M. (2012) Centrifugal compressor cooler fan high vibration: A case study. Australian Journal of Mechanical Engineering, 9 (1). pp. 1-10. ISSN 14484846

Idrus, H. and Dahan, H.M. and Abdullah, N. (2012) The place of soft skills in the development of hard sciences: The Malaysian higher education scenario. International Journal of the Humanities, 9 (10). pp. 97-110. ISSN 14479508

Idrus, H. and Noor, A.M. and Baharom, M.N.R. (2012) Motivating engineering and technical students to learn technical writing by inculcating lifelong learning skills. International Journal of Learning, 18 (11). pp. 191-202. ISSN 14479494

Imran, M. and Younis, M. and Md Said, A. and Hasbullah, H. (2012) Localized motion-based connectivity restoration algorithms for wireless sensor and actor networks. Journal of Network and Computer Applications, 35 (2). pp. 844-856. ISSN 10848045

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. (2012) Process modeling for parametric study on oil palm empty fruit bunch steam gasification for hydrogen production. Fuel Processing Technology, 93 (1). pp. 26-34. ISSN 03783820

Indriawati, K. and Saputra, R.A. and Jabal, A.A. and Budiati, T. and Biyanto, T.R. (2012) Recent developments in modeling of monitoring in the anaerobic bioreactor system. Journal of Engineering Science and Technology, 7 (1). pp. 56-72. ISSN 18234690

Irawan, F. and Irawan, S. and Awang, M. (2012) A unique opportunity for liquid carbon dioxide as an enhanced oil recovery method. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 34 (7). pp. 654-661. ISSN 15567036

Irawan, S. and Abd Rahman, A.M. and Tunio, S.Q. (2012) Optimization of weight on bit during drilling operation based on rate of penetration model. Research Journal of Applied Sciences, Engineering and Technology, 4 (12). pp. 1690-1695. ISSN 20407459

Irawan, S. and Nair, P. and Tunio, S.Q. (2012) Forecasting CBM production of mukah balingian Coalfield, Sarawak, Malaysia. Research Journal of Applied Sciences, Engineering and Technology, 4 (21). pp. 4265-4274. ISSN 20407459

Isa, M.H. and Kutty, S.R.M. and Mohd Hussin, S.R. and Daud, N.M. and Malakahmad, A. (2012) Cadmium (Cd) removal from aqueous solution using Microwave Incinerated Rice Husk Ash (MIRHA). Pertanika Journal of Science and Technology, 20 (2). pp. 339-346. ISSN 01287680

Ishak, S. and Malakahmad, A. and Isa, M.H. (2012) Refinery wastewater biological treatment: A short review. Journal of Scientific and Industrial Research, 71 (4). pp. 251-256. ISSN 00224456

J

Jalauddin, Z. and Nor, N.M. and Ibrahim, T. and Sin, Y.T. (2012) Effectiveness of the polymer electrolyte membrane fuel cell in high humidity climate. Sensors and Transducers, 17 (SPL 12). pp. 234-246. ISSN 17265479

Jaradat, A. and Muhamad Amin, A.H. and Zakaria, M.N. and Golden, K.J. (2012) An enhanced grid performance data replica selection scheme satisfying user preferences quality of service. European Journal of Scientific Research, 73 (4). pp. 527-538. ISSN 1450216X

Javed, M.S. and Mahmood, A.K.B. and Sulaiman, S.B. (2012) Project planning, implementation and monitoring issues, findings and recommendations. Research Journal of Applied Sciences, Engineering and Technology, 4 (15). pp. 2469-2488. ISSN 20407459

Javed, M.S. and Mahmood, A.K.B. and Sulaiman, S.B.T. (2012) Analytical study of projects performance before 21st century in Pakistan. Journal of Theoretical and Applied Information Technology, 43 (1). pp. 156-164. ISSN 19928645

Jehangir, M. and Dominic, P.D.D. and Khan, A. and Naseebullah (2012) The contribution of human resources to e-commerce capability and business performance: A structural equation modelling. International Journal of Business Information Systems, 11 (2). pp. 148-161. ISSN 17460972

Jehangir, M. and Dominic, P.D.D. and Langove, N. and Khan, A. (2012) Managerial expertise, top management support and learning capacity impact on e-commerce capability and business performance. International Journal of Business Innovation and Research, 6 (4). pp. 379-390. ISSN 17510252

Jun, G.J. and Raghavan, V.R. and Sing, C.Y. (2012) Experimental study on the hydrodynamics of swirling fluidized bed. Applied Mechanics and Materials, 229-23. pp. 756-760. ISSN 16609336

K

Kakooei, S. and Akil, H.M. and Dolati, A. and Rouhi, J. (2012) The corrosion investigation of rebar embedded in the fibers reinforced concrete. Construction and Building Materials, 35. pp. 564-570. ISSN 09500618

Kakooei, S. and Akil, H.M. and Jamshidi, M. and Rouhi, J. (2012) The effects of polypropylene fibers on the properties of reinforced concrete structures. Construction and Building Materials, 27 (1). pp. 73-77. ISSN 09500618

Kakooei, S. and Ismail, M.C. and Ariwahjoedi, B. (2012) Mechanisms of microbiologically influenced corrosion: A review. World Applied Sciences Journal, 17 (4). pp. 524-531. ISSN 18184952

Kakooei, S. and Taheri, H. and Ismail, M.C. and Dolati, A. (2012) Corrosion investigation of pipeline steel in hydrogen sulfide containing solutions. Journal of Applied Sciences, 12 (23). pp. 2454-2458. ISSN 18125654

Kamaruddin, I. and Habib, N.Z. and Tan, I.M. and Komiyama, M. and Napiah, M. (2012) Effect of polymer dispersion on the Rheology and morphology of polymer modified bituminous blend. RILEM Bookseries, 4. pp. 859-868. ISSN 22110844

Kaoemanee, Y. and Mahamad, S. and Ibrahim, M.N. and Kasbon, R. (2012) Designing an alternative game-based for learning Thai Language. Applied Mechanics and Materials, 143-14. pp. 475-479. ISSN 16609336

Kargupta, K. and Saha, S. and Banerjee, D. and Seal, M. and Ganguly, S. (2012) Performance enhancement of phosphoric acid fuel cell using phosphosilicate gel based electrolyte. Ranliao Huaxue Xuebao/Journal of Fuel Chemistry and Technology, 40 (6). pp. 707-713. ISSN 2097213X

Karuppanan, S. and Aminudin, A.S. and Wahab, A.A. (2012) Burst pressure estimation of corroded pipeline with interacting defects using Finite Element Analysis. Journal of Applied Sciences, 12 (24). pp. 2626-2630. ISSN 18125654

Kasbon, R. and Shaharom, S. and Mazlan, E.M. and Mahamad, S. (2012) Implementing an active database for maintaining asset data. Advances in Intelligent and Soft Computing, 115 AI (VOL. 2). pp. 99-107. ISSN 18675662

Kassa, S. and Pierson, B.J. and Chow, W.S. and Talib, J.B.A. (2012) Identifying the link between lineament and cave passage trends to comprehend fractures continuity and influence on the Kinta Valley karst system, Peninsular Malaysia. International Journal of Speleology, 41 (1). pp. 59-73. ISSN 03926672

Keow, C.H. and Nallagownden, P. and Rama Rao, K.S. (2012) A De-noising scheme for wavelet based power quality disturbances detection and classification system. International Review on Modelling and Simulations, 5 (2). pp. 998-1004. ISSN 19749821

Khan, K. and Baharudin, B.B. (2012) Identifying product features from customer reviews using lexical concordance. Research Journal of Applied Sciences, Engineering and Technology, 4 (7). pp. 833-839. ISSN 20407459

Khan, T. and Ab Wahap, S.A.B. and Chaudhuri, M. (2012) Adsorption of arsenite from water by rice husk silica. Nature Environment and Pollution Technology, 11 (2). pp. 229-233. ISSN 09726268

Khan, W.Z. and Saad, N.M. and Aalsalem, M.Y. (2012) An overview of routing metrics for the evaluation of routing protocols in wireless sensor networks. European Journal of Scientific Research, 79 (2). pp. 208-224. ISSN 1450216X

Khoa, T.D. and Shuhaimi, M. and Nam, H.M. (2012) Application of three dimensional exergy analysis curves for absorption columns. Energy, 37 (1). pp. 273-280. ISSN 03605442

Khor, C.S. and Chachuat, B. and Shah, N. (2012) Optimal water network synthesis with detailed membrane-based regenerator models. Computer Aided Chemical Engineering, 31. pp. 1457-1461. ISSN 15707946

Khor, C.S. and Chachuat, B. and Shah, N. (2012) A superstructure optimization approach for water network synthesis with membrane separation-based regenerators. Computers and Chemical Engineering, 42. pp. 48-63. ISSN 00981354

Khor, C.S. and Shah, N. and Mahadzir, S. and Elkamel, A. (2012) Optimisation of petroleum refinery water network systems retrofit incorporating reuse, regeneration and recycle strategies. Canadian Journal of Chemical Engineering, 90 (1). pp. 137-143. ISSN 00084034

Konda, R.E. and Sulaiman, S.A. and Ariwahjoedi, B. (2012) Syngas Production from Gasification of Oil Palm Fronds with an updraft gasifier. Journal of Applied Sciences, 12 (24). pp. 2555-2561. ISSN 18125654

Kuppan Chetty, R.M. and Nagarajan, T. and Karsiti, N.B. and Singaperumal, M. (2012) State based modeling and control of a multi robot systems using simulink/Stateflow. Journal of Applied Sciences, 12 (24). pp. 2494-2502. ISSN 18125654

Kuppan Chetty, R.M. and Singaperumal, M. and Nagarajan, T. (2012) Behavior based multi robot formations with active obstacle avoidance based on switching control strategy. Advanced Materials Research, 433-44. pp. 6630-6635. ISSN 10226680

Kurnia, K.A. and Kamarudin, H. and Sarwono, A. and Abdul Mutalib, M.I. and Man, Z. and Bustam, M.A. (2012) Physicochemical properties of the protic ionic liquid bis(2-hydroxyethyl) methylammonium formate. Journal of Solution Chemistry, 41 (10). pp. 1802-1811. ISSN 00959782

Kurnia, K.A. and Mutalib, M.I.A. and Man, Z. and Bustam, M.A. (2012) Density and surface tension of ionic liquids H 2N-C 2mimPF 6 and H 2N-C 3mimPF 6. Journal of Chemical and Engineering Data, 57 (11). pp. 2923-2927. ISSN 00219568

Kusbiantoro, A. and Nuruddin, M.F. and Shafiq, N. and Qazi, S.A. (2012) The effect of microwave incinerated rice husk ash on the compressive and bond strength of fly ash based geopolymer concrete. Construction and Building Materials, 36. pp. 695-703. ISSN 09500618

Kyaw, A. and Azahar, B.S.B.N. and Tunio, S.Q. (2012) Fracturing fluid (guar polymer gel) degradation study by using oxidative and enzyme breaker. Research Journal of Applied Sciences, Engineering and Technology, 4 (12). pp. 1667-1671. ISSN 20407459

L

Leon, V. and Parret, R. and Almairac, R. and Alvarez, L. and Babaa, M.-R. and Doyle, B.P. and Ienny, P. and Parent, P. and Zahab, A. and Bantignies, J.-L. (2012) Spectroscopic study of double-walled carbon nanotube functionalization for preparation of carbon nanotube / epoxy composites. Carbon, 50 (14). pp. 4987-4994. ISSN 00086223

Lias, M.R. and Rao, T.V.V.L.N. and Awang, M. and Khan, M.A. (2012) The stress distribution of gear tooth due to axial misalignment condition. Journal of Applied Sciences, 12 (23). pp. 2404-2410. ISSN 18125654

Lim, S.Y. and Norani, M.M. (2012) The effect of catalyst on Carbon Nanotubes (CNTs) synthesized by catalytic Chemical Vapor Deposition (CVD) technique. Advanced Materials Research, 364. pp. 232-237. ISSN 10226680

Lin, S.C. and Al-Kayiem, H.H. (2012) Thermophysical properties of nanoparticles-phase change material compositions for thermal energy storage. Applied Mechanics and Materials, 232. pp. 127-131. ISSN 16609336

Lin, S.C. and Al-Kayiem, H.H. and Aris, M.S.B. (2012) Experimental investigation on the performance enhancement of integrated PCM-flat plate solar collector. Journal of Applied Sciences, 12 (23). pp. 2390-2396. ISSN 18125654

Lu, C.-K. and Tang, T.B. and Laude, A. and Dhillon, B. and Murraya, A.F. (2012) Parapapillary atrophy and optic disc region assessment (PANDORA): Retinal imaging tool for assessment of the optic disc and parapapillary atrophy. Journal of Biomedical Optics, 17 (10). ISSN 10833668

Lubis, A.M.H.S. and Sudin, M. and Ariwahjoedi, B. (2012) Four-ball study of Tricresyl Phosphate effect to jatropha oil for transmission oil application. Journal of Applied Sciences, 12 (24). pp. 2503-2510. ISSN 18125654

M

Machmudah, A. and Parman, S. and Zainuddin, A. (2012) Toward Bezier Curve Bank-Turn Trajectory Generation for Flying Robot. Intelligent Systems Reference Library, 26. pp. 109-131. ISSN 18684394

Mahamad, S. and Kaoemanee, Y. and Ibrahim, M.N. and Kasbon, R. (2012) A flash-based framework for learning Thai language as second language in preschool education. Advances in Intelligent and Soft Computing, 115 AI (VOL. 2). pp. 115-122. ISSN 18675662

Majid, M.A.A. and Sulaiman, S.A. and Ibrahim, I. and Baharddin, Z. (2012) Causal model for peak and off peak waste heat recovery for chilled water production. Journal of Applied Sciences, 12 (24). pp. 2636-2640. ISSN 18125654

Malakahmad, A. and Basri, N.E.A. and Zain, S.M. (2012) Design and process simulation of a small scale waste-to-energy bioreactor. Journal of Applied Sciences, 12 (24). pp. 2586-2591. ISSN 18125654

Malakahmad, A. and Ishak, S. and Nasoha, U.N. and Isa, M.H. and Kutty, S.R. (2012) Application of sequencing batch reactor (SBR) for treatment of refinery wastewater containing nickel. WIT Transactions on Ecology and the Environment, 164. pp. 403-411. ISSN 17433541

Malik, F. and Baharudin, B. (2012) Features analysis for content-based image retrieval based on color moments. Research Journal of Applied Sciences, Engineering and Technology, 4 (9). pp. 1215-1224. ISSN 20407459

Malik, F. and Baharudin, B. (2012) Median and laplacian filters based feature analysis for content based image retrieval using color histogram refinement method. Journal of Applied Sciences, 12 (5). pp. 416-427. ISSN 18125654

Mastan, A.A.K. and Mohamed, N.M. and Ahmedullah, S.S. (2012) The effects of temperature of hydrothermal growth of titanium dioxide nanomaterial. Advanced Materials Research, 545. pp. 93-99. ISSN 10226680

Matori, A.N. and Basith, A. and Harahap, I.S.H. (2012) Study of regional monsoonal effects on landslide hazard zonation in Cameron Highlands, Malaysia. Arabian Journal of Geosciences, 5 (5). pp. 1069-1084. ISSN 18667511

Mazinani, B. and Beitollahi, A. and Masrom, A.K. and Yahya, N. and Choong, T.S.Y. and Ibrahim, S.M. and Javadpour, J. (2012) Characterization and evaluation of the photocatalytic properties of wormhole-like mesoporous silica incorporating TiO2, prepared using different hydrothermal and calcination temperatures. Research on Chemical Intermediates, 38 (8). pp. 1733-1742. ISSN 09226168

Memon, F.A. and Nuruddin, M.F. and Demie, S. and Shafiq, N. (2012) Effect of superplasticizer and extra water on workability and compressive strength of self-compacting geopolymer concrete. Research Journal of Applied Sciences, Engineering and Technology, 4 (5). pp. 407-414. ISSN 20407459

Meselhy Eltoukhy, M. and Faye, I. and Belhaouari Samir, B. (2012) A statistical based feature extraction method for breast cancer diagnosis in digital mammogram using multiresolution representation. Computers in Biology and Medicine, 42 (1). pp. 123-128. ISSN 00104825

Minh, V.T. and Mohd Hashim, F.B. and Awang, M. (2012) Development of a real-time clutch transition strategy for a parallel hybrid electric vehicle. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 226 (2). pp. 188-203. ISSN 09596518

Minh, V.T. and Rashid, A.A. (2012) Automatic control of clutches and simulations for parallel hybrid vehicles. International Journal of Automotive Technology, 13 (4). pp. 645-651. ISSN 12299138

Minh, V.T. and Rashid, A.A. (2012) Modeling and model predictive control for hybrid electric vehicles. International Journal of Automotive Technology, 13 (3). pp. 477-485. ISSN 12299138

Mirza, A. and Hamid, N.H. and Khir, M.H.M. and Dennis, J.O. and Ashraf, K. (2012) DC characterization and post-CMOS processing of a microcantilever sensor. Sensors and Transducers, 17 (SPL 12). pp. 13-21. ISSN 17265479

Mirza, A. and Hamid, N.H. and Md Khir, M.H. and Ashraf, K. and Jan, M.T. and Riaz, K. (2012) Design, modeling and simulation of CMOS-MEMS piezoresistive cantilever based carbon dioxide gas sensor for capnometry. Advanced Materials Research, 403-40. pp. 3769-3774. ISSN 10226680

Mohamad Hani, A.F. and Sathyamoorthy, D. and Sagayan Asirvadam, V. (2012) Computing surface roughness of individual cells of digital elevation models via multiscale analysis. Computers and Geosciences, 43. pp. 137-146. ISSN 00983004

Mohamed, M. and Rashidi, N.A. and Yusup, S. and Teong, L.K. and Rashid, U. and Ali, R.M. (2012) Effects of experimental variables on conversion of cockle shell to calcium oxide using thermal gravimetric analysis. Journal of Cleaner Production, 37. pp. 394-397. ISSN 09596526

Mohamed, M. and Yousuf, S. and Maitra, S. (2012) Decomposition study of calcium carbonate in cockle shell. Journal of Engineering Science and Technology, 7 (1). pp. 1-10. ISSN 18234690

Mohamed, Y.A. (2012) I2MANET security logical specification framework. International Arab Journal of Information Technology, 9 (6). ISSN 16833198

Mohammadpour, E. and Awang, M. (2012) Nonlinear finite-element modeling of graphene and single- and multi-walled carbon nanotubes under axial tension. Applied Physics A: Materials Science and Processing, 106 (3). pp. 581-588. ISSN 09478396

Mohammadpour, E. and Awang, M. (2012) A finite element model to investigate the stress�strain behavior of single walled carbon nanotube. Advanced Structured Materials, 16. pp. 369-381. ISSN 18698433

Mohideen, M.F. and Md Seri, S. and Raghavan, V.R. (2012) Fluidization of Geldart Type-D particles in a swirling fluidized bed. Applied Mechanics and Materials, 110-11. pp. 3720-3727. ISSN 16609336

Mohideen, M.F. and Sreenivasan, B. and Sulaiman, S.A. and Raghavan, V.R. (2012) Heat transfer in a swirling fluidized bed with geldart type-D particles. Korean Journal of Chemical Engineering, 29 (7). pp. 862-867. ISSN 02561115

Mohiri, A. and Burhanudin, Z.A. and Ismail, I. (2012) Permittivity and conductivity dispersions of properly and non-properly slaughtered goat meat. Sensors and Transducers, 17 (SPL 12). pp. 247-256. ISSN 17265479

Mokhlif, N.D. and Al-Kayiem, H.H. and Baharom, M.B. (2012) Estimation model for the wax Crystal Size Distribution in solvent dewaxing process. Journal of Applied Sciences, 12 (24). pp. 2548-2554. ISSN 18125654

Mokhtar, S.N.F. and Wahab, A.A. and Karuppanan, S. (2012) Fracture toughness and fatigue crack growth study of friction stir welded plates. Journal of Applied Sciences, 12 (23). pp. 2469-2473. ISSN 18125654

Moni, M.N.Z. and Sulaiman, S.A. (2012) Downdraft gasification of Oil Palm Frond: Effects of temperature and operation time. Journal of Applied Sciences, 12 (24). pp. 2574-2579. ISSN 18125654

Mouangue Nanimina, A. and Majdi Abdul Rani, A. (2012) Surface quality of electro-discharge machined aluminum metal matrix composite. Journal of Applied Sciences, 12 (23). pp. 2442-2447. ISSN 18125654

Muhammad, M. and Hussin, H. and Mokhtar, A.A. and Majid, M.A.A. (2012) Reliability assessment of repairable system based on performance data. Journal of Applied Sciences, 12 (24). pp. 2568-2573. ISSN 18125654

Muhammad, N. and Man, Z. and Khalil, M.A.B. (2012) Ionic liquid-a future solvent for the enhanced uses of wood biomass. European Journal of Wood and Wood Products, 70 (1-3). pp. 125-133. ISSN 00183768

Muhammad, N. and Man, Z. and Khalil, M.A.B. and Rafiq, S. (2012) Kinetics of thermal degradation of ionic liquid regenerated cellulose. Advanced Materials Research, 488-48. pp. 923-927. ISSN 10226680

Muhammad, N. and Man, Z. and Ziyada, A.K. and Bustam, M.A. and Mutalib, M.I.A. and Wilfred, C.D. and Rafiq, S. and Tan, I.M. (2012) Thermophysical properties of dual functionalized imidazolium-based ionic liquids. Journal of Chemical and Engineering Data, 57 (3). pp. 737-743. ISSN 00219568

Muhammad, N. and Omar, W.N. and Man, Z. and Bustam, M.A. and Rafiq, S. and Uemura, Y. (2012) Effect of ionic liquid treatment on pyrolysis products from bamboo. Industrial and Engineering Chemistry Research, 51 (5). pp. 2280-2289. ISSN 08885885

Muhammad, S.M.Z. and Norani, M.M. and Kait, C.F. (2012) Preparation & characterization of carbon nanotube-based electrochromic material. Advanced Materials Research, 364. pp. 338-343. ISSN 10226680

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Yusoff, P.S.M.B.T.M. and Raza, M.R. (2012) Carbon nanotubes reinforced copper matrix nanocomposites via metal injection molding technique. Journal of Applied Sciences, 12 (23). pp. 2397-2403. ISSN 18125654

Mumtaz, W. and Xia, L. and Malik, A.S. and Yasin, M.A.M. (2012) Complexity analysis of EEG data during rest state and visual stimulus. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7663 L (PART 1). pp. 84-91. ISSN 03029743

Munir, H.A. and Saad, N. and Junid, S.A.A.S. and Zaidi, A.M.A. and Baharin, M.K. (2012) Comparison between two types of computer for Industrial Ethernet performance. Advanced Materials Research, 433-44. pp. 4959-4967. ISSN 10226680

Murshid, G. and Shariff, A.M. and Lau, K.K. and Bustam, M.A. and Ahmad, F. (2012) Physical properties of piperazine (PZ) activated aqueous solutions of 2-amino-2-hydroxymethyl-1,3-propanediol (AHPD + PZ). Journal of Chemical and Engineering Data, 57 (1). pp. 133-136. ISSN 00219568

Murugesan, R. and Dominic, P.D.D. (2012) A study on association between personality constructs and entrepreneurial attitudes. International Journal of Business Excellence, 5 (4). pp. 378-394. ISSN 17560047

Mustafa, M.R. and Rezaur, R.B. and Rahardjo, H. and Isa, M.H. (2012) Prediction of pore-water pressure using radial basis function neural network. Engineering Geology, 135-13. pp. 40-47. ISSN 00137952

Mustafa, M.R. and Rezaur, R.B. and Saiedi, S. and Isa, M.H. (2012) Erratum to River Suspended Sediment Prediction Using Various Multilayer Perceptron Neural Network Training Algorithms-A Case Study in Malaysia(Water Resour Manage, 10.1007/s11269-012-9992-5). Water Resources Management, 26 (7). p. 2123. ISSN 09204741

Mustafa, M.R. and Rezaur, R.B. and Saiedi, S. and Isa, M.H. (2012) River suspended sediment prediction using various multilayer perceptron neural network training algorithms-A case study in Malaysia. Water Resources Management, 26 (7). pp. 1879-1897. ISSN 09204741

Mustaffa, Z. and Van Gelder, P. and Hashim, A.M. (2012) An insight in spatial corrosion prediction. International Journal of Pressure Vessels and Piping, 95. pp. 16-23. ISSN 03080161

Muthuvalu, M.S. and Sulaiman, J. (2012) An implementation of the 2-point block arithmetic mean iterative method for first kind linear fredholm integral equations. World Journal of Modelling and Simulation, 8 (4). pp. 293-301. ISSN 17467233

N

Narahari, M. (2012) Transient free convection flow between long vertical parallel plates with ramped wall temperature at one boundary in the presence of thermal radiation and constant mass diffusion. Meccanica, 47 (8). pp. 1961-1976. ISSN 00256455

Narahari, M. (2012) An exact solution of unsteady MHD free convection flow of a radiating gas past an infinite inclined isothermal plate. Applied Mechanics and Materials, 110-11. pp. 2228-2233. ISSN 16609336

Narahari, M. and Dutta, B.K. (2012) Effects of thermal radiation and mass diffusion on free convection flow near a vertical plate with newtonian heating. Chemical Engineering Communications, 199 (5). pp. 628-643. ISSN 00986445

Naseebullah, L. and Basri, S. and Dominic, P.D.D. and Jehangir, M. (2012) An empirical investigation of organisational e-readiness impact on e-procurement implementation. International Journal of Logistics Systems and Management, 12 (4). pp. 412-432. ISSN 17427967

Nasir, F.M. and Demiral, B.M.R. (2012) A comparative study on carbon dioxide miscible injection modes. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 34 (17). pp. 1559-1568. ISSN 15567036

Nasrifar, K. and Moshfeghian, M. (2012) Multiphase equilibria of waxy systems with predictive equations of state and a solid solution model. Fluid Phase Equilibria, 314. pp. 60-68. ISSN 03783812

Nazal, I.T. and Al-Kayiem, H.H. (2012) Experimental characterization of diesel engine performance fuelled by various sunflower oil-diesel mixtures. Journal of Applied Sciences, 12 (24). pp. 2604-2609. ISSN 18125654

Nazir, M.S. and Abdullah, M.A.B. and Ariwahjoedi, B. and Yussof, A.W. (2012) Hazard analysis and critical control points (HACCP) in palm oil processing to improve the productivity and food quality of palm oil vegetation in Perak, Malaysia Análisis de Peligros y Puntos Críticos de Control (APPCC) en el procesamiento de aceite de palma para mejorar la productividad y la calidad alimenticia de la vegetación de aceite de palma en Perak, Malasia. Revista Cientifica UDO Agricola, 12 (1). pp. 198-201. ISSN 13179152

Nerma, M.H.M. and Kamel, N.S. and Jagadish, V.J. (2012) Investigation of using dual tree complex wavelet transform (DT-CWT) to improve the performance of OFDM system. Engineering Letters, 20 (2). p. 3. ISSN 1816093X

Ng, W.P.Q. and Lam, H.L. and Yusup, S. (2012) Supply network design and the utilisation of rubber seed oil as biofuel and biochemicals. Chemical Engineering Transactions, 29. pp. 835-840. ISSN 22839216

Nisar, H. and Malik, A.S. and Choi, T.-S. (2012) Content adaptive fast motion estimation based on spatio-temporal homogeneity analysis and motion classification. Pattern Recognition Letters, 33 (1). pp. 52-61. ISSN 01678655

Nordin, N. and Raghavan, V.R. and Othman, S. and Karim, Z.A.A. (2012) Compatibility of 3-D turning diffusers by means of varying area ratios and outlet-inlet configurations. ARPN Journal of Engineering and Applied Sciences, 7 (6). pp. 708-713. ISSN 18196608

Nordin, N. and Raghavan, V.R. and Othman, S. and Karim, Z.A.A. (2012) Numerical investigation of turning diffuser performance by varying geometric and operating parameters. Applied Mechanics and Materials, 229-23. pp. 2086-2093. ISSN 16609336

O

O'Connor, R.V. and Basri, S. (2012) The effect of team dynamics on software development process improvement. International Journal of Human Capital and Information Technology Professionals, 3 (3). pp. 13-26. ISSN 19473478

Olanrewaju, A.A.L. (2012) Quantitative analysis of defects in university buildings: User perspective. Built Environment Project and Asset Management, 2 (2). pp. 167-181. ISSN 2044124X

Ong, M.C. and Menier, D. and Shazili, N.A.M. and Dupont, V. (2012) Geochemistry of metallic trace elements in surficial sediments of the gulf of Morbihan, Brittany, France. Journal of Applied Sciences, 12 (21). pp. 2215-2224. ISSN 18125654

Osgouei, R.E. and Sorgun, M. (2012) A critical evaluation of Iranian natural gas resources. Energy Sources, Part B: Economics, Planning and Policy, 7 (2). pp. 113-120. ISSN 15567249

Othman, I. and Idrus, A. and Napiah, M. (2012) Human resource management in the construction of a sustainable development project: Towards successful completion. WIT Transactions on Ecology and the Environment, 162. pp. 169-180. ISSN 17433541

Oumer, A.N. and Mamat, O. (2012) A study of fiber orientation in short fiber-reinforced composites with simultaneous mold filling and phase change effects. Composites Part B: Engineering, 43 (3). pp. 1087-1094. ISSN 13598368

Oyefolahan, I.O. and Dominic, P.D.D. and Abdul Karim, N.S. (2012) Knowledge management systems utilisation and knowledge sharing effectiveness: An empirical study of social antecedents in Malaysian organisations. International Journal of Business Information Systems, 11 (4). pp. 410-425. ISSN 17460972

P

Padmanabhan, E. and Eswaran, H. and Mermut, A.R. (2012) Classifying soils at the ultimate stage of weathering in the tropics. Journal of Plant Nutrition and Soil Science, 175 (1). pp. 86-93. ISSN 14368730

Pakpahan, E.N. and Isa, M.H. and Kutty, S.R.M. and Chantara, S. and Wiriya, W. and Faye, I. (2012) Comparison of polycyclic aromatic hydrocarbons emission from thermal treatment of petroleum sludge cake in the presence of different additives. Journal of Scientific and Industrial Research, 71 (6). pp. 430-436. ISSN 00224456

Parman, S. and Ari-Wahjoedi, B. and Halawa, E. and Machmudah, A. (2012) Attitude maneuvers of CTS-like spacecraft using PD based constant-amplitude inputs. Journal of Applied Sciences, 12 (24). pp. 2519-2526. ISSN 18125654

Pathmanathan, E. and Ibrahim, R. and Asirvadam, V. (2012) Development of NOx emission model using particle swarm optimized least-squared SVR (PSO-LSSVR) hybrid algorithm. Sensors and Transducers, 17 (SPL 12). pp. 98-109. ISSN 17265479

Pathmanathan, E. and Ibrahim, R. and Asirvadam, V.S. (2012) Development of CO2 emission model of an acid gas incinerator using Nelder-Mead least squares support vector regression. Transactions of the Institute of Measurement and Control, 34 (8). pp. 974-982. ISSN 01423312

Pattinasarany, A. and Irawan, S. (2012) The novel method to estimate effect of cement slurry consistency toward friction pressure in oil/gas well cementing. Research Journal of Applied Sciences, Engineering and Technology, 4 (22). pp. 4596-4606. ISSN 20407459

Pierre, D.M. and Zakaria, N. and Pal, A.J. (2012) Quantitative and qualitative analysis of unmanned aerial vehicle's path planning using master-slave parallel vector-evaluated genetic algorithm. Advances in Intelligent and Soft Computing, 130 AI (VOL. 1). pp. 567-577. ISSN 18675662

Potty, N.S. and Ting, O.S. and Liew, M.S. (2012) Study of marine structural corrosion using corrosion coupons in lumut area. Malaysian Journal of Science, 31 (1). pp. 56-73. ISSN 13943065

Prihatin, T. and Mahadzir, S. and Abdul Mutalib, M.I. (2012) Modeling and optimization of water-based polygeneration system. Computer Aided Chemical Engineering, 31. pp. 1427-1431. ISSN 15707946

R

Rafiq, S. and Man, Z. and Maitra, S. and Muhammad, N. and Ahmad, F. (2012) Kinetics of thermal degradation of polysulfone/polyimide blended polymeric membranes. Journal of Applied Polymer Science, 123 (6). pp. 3755-3763. ISSN 00218995

Rafiq, S. and Man, Z. and Maulud, A. and Muhammad, N. and Maitra, S. (2012) Preparation and characterization of blended composite membranes. Advanced Materials Research, 488-48. pp. 506-510. ISSN 10226680

Rafiq, S. and Man, Z. and Maulud, A. and Muhammad, N. and Maitra, S. (2012) Separation of CO 2 from CH 4 using polysulfone/ polyimide silica nanocomposite membranes. Separation and Purification Technology, 90. pp. 162-172. ISSN 13835866

Rahmah, A.U. and Harimurti, S. and Omar, A.A. and Murugesan, T. (2012) Optimization of oxytetracycline degradation inside UV/H2O2 reactor using box-behnken experimental design. Journal of Applied Sciences, 12 (11). pp. 1154-1159. ISSN 18125654

Rahmat, R. and Mallik, A.S. and Kamel, N. and Choi, T.-S. and Hayes, M.H. (2012) 3D shape from focus using LULU operators. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7517 L. pp. 237-245. ISSN 03029743

Rama Rao, K.S. and Karsiti, M.N. (2012) Optimal design of a furnace transformer by intelligent evolutionary methods. International Journal of Electrical Power and Energy Systems, 43 (1). pp. 1056-1062. ISSN 01420615

Ramanathan, C. and Narayanan, S.P. and Idrus, A.B. (2012) Construction delays causing risks on time and cost - A critical review. Australasian Journal of Construction Economics and Building, 12 (1). pp. 37-57. ISSN 18356354

Ramanathan, C. and Potty, N.S. and Idrus, A.B. (2012) Analysis of time and cost overrun in Malaysian construction. Advanced Materials Research, 452-45. pp. 1002-1008. ISSN 10226680

Ramli, A. and Ahmed, S. and Yusup, S. (2012) Effect of synthesis duration on the physicochemical properties of siliceous mesoporous molecular sieve (Si-MMS). Defect and Diffusion Forum, 326-32. pp. 647-653. ISSN 10120386

Ramli, R. and Malik, A.S. and Hani, A.F.M. and Jamil, A. (2012) Acne analysis, grading and computational assessment methods: An overview. Skin Research and Technology, 18 (1). pp. 1-14. ISSN 0909752X

Rao, T.V.V.L.N. (2012) Stability characteristics of misaligned journal bearing. Advances in Vibration Engineering, 11 (4). pp. 361-370. ISSN 09725768

Rao, T.V.V.L.N. (2012) Stabilization of journal bearing using two-layered film lubrication. Journal of Tribology, 134 (1). ISSN 07424787

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Analysis of slider and journal bearing using partially textured slip surface. Tribology International, 56. pp. 121-128. ISSN 0301679X

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Analysis of two-layered porous journal bearing using the Brinkman model. Journal of Applied Sciences, 12 (24). pp. 2610-2615. ISSN 18125654

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Partially textured slider and journal bearing analysis. Jurnal Teknologi (Sciences and Engineering), 58 (SUPPL.). pp. 77-84. ISSN 01279696

Rashidi, N.A. and Eldemerdash, U.M.N. (2012) Evaluation of Lime as an aid for coagulation - Flocculation treatment of textile wastewater effluent. InterCeram: International Ceramic Review, 61 (1). pp. 12-15. ISSN 00205214

Rashidi, N.A. and Mohamed, M. and Yusup, S. (2012) The kinetic model of calcination and carbonation of Anadara Granosa. International Journal of Renewable Energy Research, 2 (3). pp. 497-503. ISSN 13090127

Raza, M.R. and Ahmad, F. and Mamat, O. and Omar, M.A. and German, R.M. and Muhsan, A.S. (2012) Effects of sintering temperature and cooling rate on mechanical properties of powder injection molded 316L stainless steel. Solid State Phenomena, 185. pp. 102-105. ISSN 10120394

Raza, M.R. and Ahmad, F. and Omar, M.A. and German, R.M. (2012) Effects of cooling rate on mechanical properties and corrosion resistance of vacuum sintered powder injection molded 316L stainless steel. Journal of Materials Processing Technology, 212 (1). pp. 164-170. ISSN 09240136

Raza, M.R. and Ahmad, F. and Omar, M.A. and German, R.M. and Muhsan, A.S. (2012) Defect analysis of 316LSS during the powder injection moulding process. Defect and Diffusion Forum, 329. pp. 35-43. ISSN 10120386

Renganathan, S. and Karim, Z.A.B.A. and Li, C.S. (2012) Students' perception of industrial internship programme. Education and Training, 54 (2-3). pp. 180-191. ISSN 00400912

Riaz, N. and Chong, F.K. and Dutta, B.K. and Man, Z.B. and Khan, M.S. and Nurlaela, E. (2012) Photodegradation of Orange II under visible light using Cu-Ni/TiO 2: Effect of calcination temperature. Chemical Engineering Journal, 185-18. pp. 108-119. ISSN 13858947

Ridha, S. and Irawan, S. and Ariwahjoedi, B. and Azizli, K.A.B.M. and Nuruddin, M.F. and Khairy, H. (2012) Modified Johnson model for permeability estimation in oil well cement during early hydration. Research Journal of Applied Sciences, Engineering and Technology, 4 (17). pp. 2920-2925. ISSN 20407459

Rizvi, S. and Saad, N.M. (2012) A dual mode mobile terminal for enhanced performance of data services in NGN networks. European Journal of Scientific Research, 67 (3). pp. 360-377. ISSN 1450216X

Rouhi, J. and Mahmud, S. and Hutagalung, S.D. and Kakooei, S. (2012) Optimisation of nanooxide mask fabricated by atomic force microscopy nanolithography: A response surface methodology application. Micro and Nano Letters, 7 (4). pp. 325-328. ISSN 17500443

Rouhi, J. and Mahmud, S. and Hutagalung, S.D. and Naderi, N. and Kakooei, S. and Abdullah, M.J. (2012) Controlling the shape and gap width of silicon electrodes using local anodic oxidation and anisotropic TMAH wet etching. Semiconductor Science and Technology, 27 (6). ISSN 02681242

Rozyyev, A. and Hasbullah, H. and Subhan, F. (2012) Combined K-Nearest neighbors and fuzzy logic indoor localization technique for wireless sensor network. Research Journal of Information Technology, 4 (4). pp. 155-165. ISSN 18157432

S

Saad, N. and Arrofiq, M. (2012) A PLC-based modified-fuzzy controller for PWM-driven induction motor drive with constant V/Hz ratio control. Robotics and Computer-Integrated Manufacturing, 28 (2). pp. 95-112. ISSN 07365845

Saeid, E. and Jeoti, V. and Samir, B.B. (2012) Efficient PA-SLNR linear precoding for multiuser multiple input multiple output system. Research Journal of Applied Sciences, Engineering and Technology, 4 (15). pp. 2489-2495. ISSN 20407459

Safar, A.M. and Aljunid, S.A. and Arief, A.R. and Nordin, J. and Saad, N. (2012) Minimizing correlation effect using zero cross correlation code in spectral amplitude coding optical code division multiple access. Optical Review, 19 (1). pp. 20-24. ISSN 13406000

Sahoo, N.C. and Ganguly, S. and Das, D. (2012) Multi-objective planning of electrical distribution systems incorporating sectionalizing switches and tie-lines using particle swarm optimization. Swarm and Evolutionary Computation, 3. pp. 15-32. ISSN 22106502

Said, A.M. and Dominic, P.D.D. and Zailani, S. (2012) A new scheme for extracting association rules: Market basket analysis case study. International Journal of Business Innovation and Research, 6 (1). pp. 28-46. ISSN 17510252

Saleem, H.M. and Hassan, M.F. and Asirvadam, V.S. (2012) Proxy-based selective forwarding in distributed service discovery using Application Oriented Networking. Advances in Information Sciences and Service Sciences, 4 (8). pp. 9-18. ISSN 19763700

Saleem, M.Q. and Jaafar, J. and Hassan, M.F. (2012) Secure business process modelling of SOA applications using "UML-SOA-Sec". International Journal of Innovative Computing, Information and Control, 8 (4). pp. 2729-2746. ISSN 13494198

Saleem, M.Q. and Jaafar, J.B. and Hassan, M.F. (2012) Framework for the model driven development of secure web services composition. Advances in Information Sciences and Service Sciences, 4 (9). pp. 67-78. ISSN 19763700

Saleem, M.Q. and Jaafar, J.B. and Hassan, M.F. (2012) Model-based security engineering of SOA systems using modified "UML-SOA-Sec". Advances in Information Sciences and Service Sciences, 4 (9). pp. 79-88. ISSN 19763700

Saleem, M.Q. and Jaafar, J.B. and Hassan, M.F. (2012) A domain-specific language for modelling security objectives in a business process models of SOA applications. Advances in Information Sciences and Service Sciences, 4 (1). pp. 353-362. ISSN 19763700

Saleh, A.F. and Kamarudin, E. and Yaacob, A.B. and Yussof, A.W. and Abdullah, M.A. (2012) Optimization of biomethane production by anaerobic digestion of palm oil mill effluent using response surface methodology. Asia-Pacific Journal of Chemical Engineering, 7 (3). pp. 353-360. ISSN 19322135

Samuding, K. and Rahman, M.T.A. and Abustan, I. and Isa, M.H. (2012) Heavy metals profiles in a groundwater system at a solid waste disposal site, Taiping, Perak. Bulletin of the Geological Society of Malaysia (58). pp. 9-14. ISSN 01266187

Sandran, T. and Zakaria, N. and Pal, A.J. (2012) An optimized tuning of genetic algorithm parameters in compiler flag selection based on compilation and execution duration. Advances in Intelligent and Soft Computing, 131 AI (VOL. 2). pp. 599-610. ISSN 18675662

Sapari, N. and Azie, R.Z.R. and Jusoh, H. (2012) Groundwater from fractured granite and metasedimentary rocks in the west coast of Peninsular Malaysia. Pertanika Journal of Science and Technology, 20 (2). pp. 371-379. ISSN 01287680

Sarini, M.Y. and Mokhtar, C.I. (2012) Corrosion inhibition performance with the presence of iron carbonate film in CO2 saturated brine solution. Journal of Corrosion Science and Engineering, 15. pp. 1-16. ISSN 14668858

Sarwono, A. and Man, Z. and Bustam, M.A. (2012) Blending of Epoxidised Palm Oil with Epoxy Resin: The Effect on Morphology, Thermal and Mechanical Properties. Journal of Polymers and the Environment, 20 (2). pp. 540-549. ISSN 15662543

Satheesh Kumar, G. and Nagarajan, T. (2012) Reconfigurable Stewart platform for vibration isolation. Communications in Computer and Information Science, 330 CC. pp. 37-45. ISSN 18650929

Sazhin, S.S. and Heikal, M.R. (2012) Droplet heating and evaporation-recent results and unsolved problems. Computational Thermal Sciences, 4 (6). pp. 485-496. ISSN 19402503

Seong Khor, C. and Chachuat, B. and Shah, N. (2012) Optimal water network synthesis with membrane separation-based regenerators. Computer Aided Chemical Engineering, 30. pp. 36-40. ISSN 15707946

Sern, W.K. and Takriff, M.S. and Kamarudin, S.K. and Talib, M.Z.M. and Hasan, N. (2012) Numerical simulation of fluid flow behaviour on scale up of oscillatory baffled column. Journal of Engineering Science and Technology, 7 (1). pp. 119-130. ISSN 18234690

Shaari, K.Z.K. and Mohd Laziz, A. and Heinen, K. and Awang, M. and Sufian, S. and Mahadzir, S. (2012) CFD simulation of coaxial jet mixer using RANS turbulent models. Defect and Diffusion Forum, 326-32. pp. 416-421. ISSN 10120386

Shah, P.A. and Yousaf, M. and Qayyum, A. and Hasbullah, H.B. (2012) Performance comparison of end-to-end mobility management protocols for TCP. Journal of Network and Computer Applications, 35 (6). pp. 1657-1673. ISSN 10848045

Shahzad, R. and Naveenchandran, P. and Aziz, A.R.A. (2012) Characteristics of lean and stoichiometric combustion of compressed natural gas in a direct injection engine. Applied Mechanics and Materials, 110-11. pp. 357-369. ISSN 16609336

Shaidan, N.H. and Eldemerdash, U. and Awad, S. (2012) Removal of Ni(II) ions from aqueous solutions using fixed-bed ion exchange column technique. Journal of the Taiwan Institute of Chemical Engineers, 43 (1). pp. 40-45. ISSN 18761070

Shariff, A.M. and Leong, C.T. and Zaini, D. (2012) Using process stream index (PSI) to assess inherent safety level during preliminary design stage. Safety Science, 50 (4). pp. 1098-1103. ISSN 09257535

Shariff, A.M. and Norazahar, N. (2012) At-risk behaviour analysis and improvement study in an academic laboratory. Safety Science, 50 (1). pp. 29-38. ISSN 09257535

Shoushtari, M.A. and Al-Kayiem, H.H. (2012) Synergistic evaluation of production tubing heat losses and integrity of oil well. Journal of Applied Sciences, 12 (23). pp. 2484-2488. ISSN 18125654

Siddiqui, F.I. and Bin Syed Osman, S.B.A. (2012) Electrical resistivity based non-destructive testing method for determination of soil's strength properties. Advanced Materials Research, 488-48. pp. 1553-1557. ISSN 10226680

Sing, C.Y. and Aris, M.S. (2012) An experimental investigation on the handling and storage properties of biomass fuel briquettes made from oil palm mill residues. Journal of Applied Sciences, 12 (24). pp. 2621-2625. ISSN 18125654

Sinnathambi, C.M. and Ismail, R.A.M. (2012) Optimization of n-hexane reforming using taguchi orthogonal array design. Sains Malaysiana, 41 (7). pp. 885-892. ISSN 01266039

Sinnathambi, C.M. and Nor, N.M. (2012) Relationship between SARA fractions and crude oil fouling. Journal of Applied Sciences, 12 (23). pp. 2479-2483. ISSN 18125654

Siti, N.A.Z. and Norani, M.M. and Bustam, M.A. (2012) The effect of calcinations temperature on the performance of TiO 2 aggregates-based Dye Solar Cells (DSCs). Advanced Materials Research, 364. pp. 248-253. ISSN 10226680

Soleimani, H. and Abbas, Z. and Yahya, N. and Shameli, K. and Soleimani, H. and Shabanzadeh, P. (2012) Reflection and transmission coefficient of Yttrium iron garnet filled polyvinylidene fluoride composite using rectangular waveguide at microwave frequencies. International Journal of Molecular Sciences, 13 (7). pp. 8540-8548. ISSN 16616596

Soleimani, H. and Abbas, Z. and Yahya, N. and Soleimani, H. and Ghotbi, M.Y. (2012) Determination of complex permittivity and permeability of lanthanum iron garnet filled PVDF-polymer composite using rectangular waveguide and Nicholson-Ross-Weir (NRW) method at X-band frequencies. Measurement: Journal of the International Measurement Confederation, 45 (6). pp. 1621-1625. ISSN 02632241

Soleimani, H. and Abbas, Z. and Yahya, N. and Soleimani, H. and Ghotbi, M.Y. (2012) Microwave characterization of lanthanum iron garnet-filled PVDF-polymer composite using rectangular waveguide at X-band frequency. Journal of Composite Materials, 46 (12). pp. 1497-1501. ISSN 00219983

Sulaiman, S.A. and Atnaw, S.M. and Moni, M.N.Z. (2012) Experimental study on temperature profile of fixed-bed gasification of oil-palm fronds. International Journal of Technology, 3 (1). pp. 35-44. ISSN 20869614

Sulaiman, S.A. and Kamarudin, N.A.Z. (2012) Bubbles size estimation in liquid flow through a vertical pipe. Journal of Applied Sciences, 12 (23). pp. 2464-2468. ISSN 18125654

Sulaiman, S.A. and Mujor, S.N.A. and Anffin, S.Z.H.S.T. and Muhammad, R. and Manaf, N.A. (2012) A study on reduction of cooling energy in glazed buildings. Journal of Applied Sciences, 12 (23). pp. 2436-2441. ISSN 18125654

Surya Abadi Ginting, M. and Tazli Azizan, M. and Yusup, S. (2012) Alkaline in situ ethanolysis of Jatropha curcas. Fuel, 93. pp. 82-85. ISSN 00162361

T

Taib, M.M. and Murugesan, T. (2012) Density, refractive index, and excess properties of 1-butyl-3- methylimidazolium tetrafluoroborate with water and monoethanolamine. Journal of Chemical and Engineering Data, 57 (1). pp. 120-126. ISSN 00219568

Taib, M.M. and Murugesan, T. (2012) Experimental study on the extractive desulfurization of model fuel using hydroxyl ammonium ionic liquids. Asia-Pacific Journal of Chemical Engineering, 7 (3). pp. 469-473. ISSN 19322135

Taib, M.M. and Murugesan, T. (2012) Solubilities of CO 2 in aqueous solutions of ionic liquids (ILs) and monoethanolamine (MEA) at pressures from 100 to 1600kPa. Chemical Engineering Journal, 181-18. pp. 56-62. ISSN 13858947

Taib, M.M. and Ziyada, A.K. and Wilfred, C.D. and Murugesan, T. (2012) Volumetric properties and refractive indices for binary mixtures of 1-propyronitrile-3-hexylimidazolium bromide + ethanol at temperatures from 293.15 to 323.15 K. Journal of Solution Chemistry, 41 (1). pp. 100-111. ISSN 00959782

Takaijudin, H. and Shahir, A.H.A. and Hashim, A.M. (2012) The utilization of an abandoned mining pond as a retention pond in dealing with stormwater runoff. WIT Transactions on Ecology and the Environment, 159. pp. 27-37. ISSN 17433541

Talpur, M.A.H. and Napiah, M. and Chandio, I.A. and Khahro, S.H. (2012) Transportation planning survey methodologies for the proposed study of physical and socio-economic development of deprived rural regions: A review. Modern Applied Science, 6 (7). pp. 1-16. ISSN 19131844

Tan, L.S. and Lau, K.K. and Bustam, M.A. and Shariff, A.M. (2012) Removal of high concentration CO2 from natural gas at elevated pressure via absorption process in packed column. Journal of Natural Gas Chemistry, 21 (1). pp. 7-10. ISSN 10039953

Tan, L.S. and Shariff, A.M. and Lau, K.K. and Bustam, M.A. (2012) Factors affecting CO 2 absorption efficiency in packed column: A review. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 1874-1883. ISSN 1226086X

Teoh, S.K. and Yap, V.V. and Soh, C.S. and Sebastian, P. (2012) Implementation and optimization of human tracking system using ARM embedded platform. Sensors and Transducers, 17 (SPL 12). pp. 226-233. ISSN 17265479

Thaw, Y.Y. and Dominic, P.D.D. and Mahmood, A.K. (2012) A structural equation modelling approach for Malaysian consumers' perspectives on e-commerce B2C transactions. International Journal of Business Information Systems, 10 (2). pp. 178-196. ISSN 17460972

Thaw, Y.Y. and Dominic, P.D.D. and Mahmood, A.K.B. (2012) The factors associating consumers' trust in e-commerce transactions: Malaysian consumers' perspectives. International Journal of Business Innovation and Research, 6 (2). pp. 238-257. ISSN 17510252

Tiew, B.J. and Shuhaimi, M. and Hashim, H. (2012) Carbon emission reduction targeting through process integration and fuel switching with mathematical modeling. Applied Energy, 92. pp. 686-693. ISSN 03062619

Tiruselvam, R. and Raghavan, V.R. (2012) Double tube heat exchanger with novel enhancement: Part I-flow development length and adiabatic friction factor. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 48 (4). pp. 641-651. ISSN 09477411

Triwiyanto, A. and Hussain, P. and Ismail, M.C. (2012) Behavior of carbon and nitrogen after low temperature thermochemical treatment on austenitic and Duplex stainless steel. Applied Mechanics and Materials, 110-11. pp. 621-626. ISSN 16609336

Tunio, S.Q. and Bhattacharya, S.K. and Irawan, S. (2012) A critical review of methane trapping mechanism to optimize CBM production. Research Journal of Applied Sciences, Engineering and Technology, 4 (23). pp. 5248-5250. ISSN 20407459

Tunio, S.Q. and Chandio, T.A. (2012) Recovery enhancement with application of FAWAG for a Malaysian field. Research Journal of Applied Sciences, Engineering and Technology, 4 (1). pp. 8-10. ISSN 20407459

Tunio, S.Q. and Chandio, T.A. and Memon, M.K. (2012) Comparative study of FAWAG and SWAG as an effective EOR technique for a Malaysian field. Research Journal of Applied Sciences, Engineering and Technology, 4 (6). pp. 645-648. ISSN 20407459

Tunji, L.A.Q. and Hashim, A.M. and Yusof, K.W. (2012) Shoreline response to three submerged offshore breakwaters along Kerteh Bay Coast of terengganu. Research Journal of Applied Sciences, Engineering and Technology, 4 (16). pp. 2604-2615. ISSN 20407459

U

Ugheoke, B.I. and Mamat, O. (2012) Hydro thermo-baric processing and properties of nano silica from rice husk. Applied Mechanics and Materials, 152-15. pp. 177-182. ISSN 16609336

Ugheoke, B.I. and Mamat, O. (2012) A novel method for high volume production of nano silica from rice husk: Process development and product characteristics. International Journal of Materials Engineering Innovation, 3 (2). pp. 139-155. ISSN 17572754

Ugheoke, I.B. and Mamat, O. (2012) A critical assessment and new research directions of rice husk silica processing methods and properties. Maejo International Journal of Science and Technology, 6 (3). pp. 430-448. ISSN 19057873

Ul Mustafa, M.R. and Bhuiyan, R.R. and Isa, M.H. and Saiedi, S. and Rahardjo, H. (2012) Effect of antecedent conditions on prediction of pore-water pressure using artificial neural networks. Modern Applied Science, 6 (2). pp. 6-15. ISSN 19131844

Ullah, R. and Jaafar, J. (2012) Queries snippet expansion for efficient images retrieval. Journal of Theoretical and Applied Information Technology, 40 (1). pp. 22-26. ISSN 19928645

Ullah, S. and Ahmad, F. (2012) Enhancing the char resistant of expandable graphite based intumescent fire retardant coatings by using multi-wall carbon nano tubes for structural steel. Solid State Phenomena, 185. pp. 90-93. ISSN 10120394

V

Vasant, P. (2012) A novel hybrid genetic algorithms and pattern search techniques for industrial production planning. International Journal of Modeling, Simulation, and Scientific Computing, 3 (4). ISSN 17939623

Vasant, P. and Ganesan, T. and Elamvazuthi, I. (2012) Hybrid tabu search hopfield recurrent ANN fuzzy technique to the production planning problems: A case study of crude oil in refinery industry. International Journal of Manufacturing, Materials, and Mechanical Engineering, 2 (1). pp. 47-65. ISSN 21561680

Vasant, P. and Ganesan, T. and Elamvazuthi, I. (2012) Improved tabu search recursive fuzzy method for crude oil industry. International Journal of Modeling, Simulation, and Scientific Computing, 3 (1). ISSN 17939623

Venkiteswaran, V.K. and Jun, G.J. and Sing, C.Y. and Sulaiman, S.A. and Raghavan, V.R. (2012) Variation of bed pressure drop with particle shapes in a swirling fluidized bed. Journal of Applied Sciences, 12 (24). pp. 2598-2603. ISSN 18125654

W

Wasiu, A.B. and Abd. Aziz, A.R. and Heikal, M.R. (2012) The effect of carbon dioxide content-natural gas on the performance characteristics of engines: A review. Journal of Applied Sciences, 12 (23). pp. 2346-2350. ISSN 18125654

Wilfred, C.D. and Kiat, C.F. and Man, Z. and Bustam, M.A. and Mutalib, M.I.M. and Phak, C.Z. (2012) Extraction of dibenzothiophene from dodecane using ionic liquids. Fuel Processing Technology, 93 (1). pp. 85-89. ISSN 03783820

Windarta and Bin Sudin, M. (2012) Analytical study on wear interaction between rail-wheel. Applied Mechanics and Materials, 110-11. pp. 2406-2410. ISSN 16609336

Windarta and Bin Sudin, M. and Baharom, M.B. (2012) Prediction of contact temperature on interaction between rail and wheel materials using pin-on-disc method. Journal of Applied Sciences, 12 (23). pp. 2424-2429. ISSN 18125654

Y

Yahya, N. and Akhtar, M.N. and Koziol, K. (2012) Encapsulation of Ni0.8Zn0.2Fe2O 4 single crystals in multiwall carbon nanotubes. Journal of Nanoscience and Nanotechnology, 12 (10). pp. 8116-8122. ISSN 15334880

Yahya, N. and Akhtar, M.N. and Nasir, N. and Shafie, A. and Jabeli, M.S. and Koziol, K. (2012) Carbon nanotubes fibres/aluminium-NiZnFe2O4 based electromagnetic transmitter for improved magnitude versus offset (MVO) in a scaled marine environment. Journal of Nanoscience and Nanotechnology, 12 (10). pp. 8100-8109. ISSN 15334880

Yahya, N. and Kashif, M. and Nasir, N. and Akhtar, M.N. and Yusof, N.M. (2012) Cobalt ferrite nanoparticles: An innovative approach for enhanced oil recovery application. Journal of Nano Research, 17. pp. 115-126. ISSN 16625250

Yahya, N. and Puspitasari, P. and Koziol, K. and Pavia, G. (2012) New Approach to ammonia synthesis by catalysis in magnetic field. Journal of Nano Research, 16. pp. 119-130. ISSN 16625250

Yahya, N. and Zakariah, M.H. (2012) Synthesis and characterization of YBa2Cu3O 7(Y123) via sol-gel method for development of superconducting quantum interference device magnetometer. Journal of Nanoscience and Nanotechnology, 12 (10). pp. 8147-8152. ISSN 15334880

Yaqub, A. and Ajab, H. and Isa, M.H. and Jusoh, H. and Junaid, M. and Farooq, R. (2012) Effect of ultrasound and electrode material on electrochemical treatment of industrial wastewater. Journal of New Materials for Electrochemical Systems, 15 (4). pp. 289-292. ISSN 14802422

Yazid, E. and Liew, M.S. and Parman, S. (2012) Time-varying spectrum estimation of offshore structure response based on a time-varying autoregressive model. Journal of Applied Sciences, 12 (23). pp. 2383-2389. ISSN 18125654

Yohannes, I. and Assaad, M. and Hisham Hamid, N. (2012) A CMOS interface circuit design for a 32-level resolution light sensor. International Review on Modelling and Simulations, 5 (4). pp. 1563-1568. ISSN 19749821

Yong, L.C. and Saad, N. and Idris, A.M. and Syahmi, A.H. (2012) Ladder logic diagram development for programmable logic controllers via S-method. Applied Mechanics and Materials, 229-23. pp. 2399-2403. ISSN 16609336

Yong, S.-P. and Deng, J.D. and Purvis, M.K. (2012) Novelty detection in wildlife scenes through semantic context modelling. Pattern Recognition, 45 (9). pp. 3439-3450. ISSN 00313203

Yunus, N.M. and Mutalib, M.I.A. and Man, Z. and Bustam, M.A. and Murugesan, T. (2012) Solubility of CO 2 in pyridinium based ionic liquids. Chemical Engineering Journal, 189-19. pp. 94-100. ISSN 13858947

Z

Zahed, M.A. and Aziz, H.A. and Isa, M.H. and Mohajeri, L. (2012) Response Surface Analysis to Improve Dispersed Crude Oil Biodegradation. Clean - Soil, Air, Water, 40 (3). pp. 262-267. ISSN 18630650

Zahlay, F.D. and Rama Rao, K.S. (2012) Neuro-prony and Taguchi's methodology-based adaptive autoreclosure scheme for electric transmission systems. IEEE Transactions on Power Delivery, 27 (2). pp. 575-582. ISSN 08858977

Zainol, I. and Alwi, N.M. and Abidin, M.Z. and Haniza, H.M.Z. and Ahmad, M.S. and Ramli, A. (2012) Physicochemical properties of hydroxyapatite extracted from fish scales. Advanced Materials Research, 545. pp. 235-239. ISSN 10226680

Zamin, N. and Oxley, A. and Bakar, Z.A. and Farhan, S.A. (2012) A lazy man�s way to part-of-speech tagging. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7457 L. pp. 106-117. ISSN 03029743

Ziyada, A.K. and Wilfred, C.D. and Murugesan, T. (2012) Densities, viscosities and refractive indices of 1-alkyl-3-propanenitrile imidazolium chloride ionic liquids. Physics and Chemistry of Liquids, 50 (2). pp. 152-160. ISSN 00319104