A

Abdullah, M.Z. and Loo, K.P. (2006) Separation of divalent metal ions using Pandanus Amaryllifolius Roxb (Pandanus) leaves: Desorption study. WIT Transactions on Ecology and the Environment, 92. pp. 313-321. ISSN 17433541

Adam, A.B. and Sakrani, S. and Wahab, Y. (2006) Sn-Sb-Se crystalline phases formed by melt-quenching technique. Journal of Materials Science, 41 (17). pp. 5797-5801. ISSN 00222461

Adam, M.I. and Osamura, K. (2006) Electromechanical properties of Ag/Bi2223 flat wire in a short thermocycle. Superconductor Science and Technology, 19 (10). pp. 1018-1022. ISSN 09532048

Azmi, A.S. and Yusup, S. and Muhamad, S. (2006) The influence of temperature on adsorption capacity of Malaysian coal. Chemical Engineering and Processing: Process Intensification, 45 (5). pp. 392-396. ISSN 02552701

B

Begam, K.M. and Prabaharan, S.R.S. (2006) Improved cycling performance of nano-composite Li2Ni2(MoO4)3 as a lithium battery cathode material. Journal of Power Sources, 159 (1 SPEC). pp. 319-322. ISSN 03787753

Bhattacharya, A. and Abraham, A. and Grosan, C. and Vasant, P. and Han, S. (2006) Meta-learning evolutionary artificial neural network for selecting flexible manufacturing systems. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 3973 L. pp. 891-897. ISSN 03029743

G

German, R.M. and Ahmad, F. (2006) Statistical analysis of fibre fracture during powder injection moulding. Powder Metallurgy, 49 (4). pp. 307-313. ISSN 00325899

J

Jaafar, M.S. and Alwathaf, A.H. and Thanoon, W.A. and Noorzaei, J. and Abdulkadir, M.R. (2006) Behaviour of interlocking mortarless block masonry. Proceedings of Institution of Civil Engineers: Construction Materials, 159 (3). pp. 111-117. ISSN 1747650X

K

Khalil, H.P.S.A. and Shahnaz, S.B.S. and Ratnam, M.M. and Ahmad, F. and Fuaad, N.A.N. (2006) Recycle polypropylene (RPP) - Wood saw dust (WSD) composites - Part 1: The effect of different filler size and filler loading on mechanical and water absorption properties. Journal of Reinforced Plastics and Composites, 25 (12). pp. 1291-1303. ISSN 07316844

M

Mohamad Ibrahim, M.N. and Nur Azreena, I. and Nor Nadiah, M.Y. and Mohd Saaid, I. (2006) Lignin graft copolymer as a drilling mud thinner for high temperature well. Journal of Applied Sciences, 6 (8). pp. 1808-1813. ISSN 18125654

Mohamed, N.M. and Chech, T.Y. and Masrom, A.K. (2006) Narrow diameter Carbon Nanotubes (CNTs) for polymer composite reinforcement. Materials Science Forum, 517. pp. 129-134. ISSN 02555476

Mohd Shariff, A. and Rusli, R. and Leong, C.T. and Radhakrishnan, V.R. and Buang, A. (2006) Inherent safety tool for explosion consequences study. Journal of Loss Prevention in the Process Industries, 19 (5). pp. 409-418. ISSN 09504230

Mustaffa, Z. and Rajaratnam, N. and Zhu, D.Z. (2006) An experimental study of flow into orifices and grating inlets on streets. Canadian Journal of Civil Engineering, 33 (7). pp. 837-845. ISSN 03151468

N

Nadeem, M. and Rangkuti, C. and Anuar, K. and Haq, M.R.U. and Tan, I.B. and Shah, S.S. (2006) Diesel engine performance and emission evaluation using emulsified fuels stabilized by conventional and gemini surfactants. Fuel, 85 (14-15). pp. 2111-2119. ISSN 00162361

Nadeem, M. and Tan, I.B. and Haq, M.R.U. and Shahid, S.A. and Shah, S.S. and McKay, G. (2006) Sorption of lead ions from aqueous solution by chickpea leaves, stems and fruit peelings. Adsorption Science and Technology, 24 (3). pp. 269-282. ISSN 02636174

Noorzaei, J. and Bayagoob, K.H. and Thanoon, W.A. and Jaafar, M.S. (2006) Thermal and stress analysis of Kinta RCC dam. Engineering Structures, 28 (13). pp. 1795-1802. ISSN 01410296

Noorzaei, J. and Naghshineh, A. and Abdul Kadir, M.R. and Thanoon, W.A. and Jaafar, M.S. (2006) Nonlinear interactive analysis of cooling tower-foundation-soil interaction under unsymmetrical wind load. Thin-Walled Structures, 44 (9). pp. 997-1005. ISSN 02638231

O

Omar, R. and Abdullah, M.A. and Hasan, M.A. and Rosfarizan, M. and Marziah, M. (2006) Kinetics and modelling of cell growth and substrate uptake in Centella asiatica cell culture. Biotechnology and Bioprocess Engineering, 11 (3). pp. 223-229. ISSN 12268372

P

Pasricha, M.S. (2006) Effect of damping on parametrically excited torsional vibrations of reciprocating engines including gas forces. Journal of Ship Research, 50 (2). pp. 147-157. ISSN 00224502

R

Ramasamy, M. (2006) Modeling of grinding in a laboratory continuous ball mill for dynamic studies. Chemical Product and Process Modeling, 1 (1). ISSN 19342659

S

Saad, N. and Kadirkamanathan, V. (2006) A DES approach for the contextual load modelling of supply chain system for instability analysis. Simulation Modelling Practice and Theory, 14 (5). pp. 541-563. ISSN 1569190X

Shafiq, N. and Cabrera, J.G. (2006) Calculation of the coefficients of oxygen permeability of mortar samples using PORECOR analysis. Structural Concrete, 7 (4). pp. 159-164. ISSN 14644177

T

Thanoon, H.A. and Jaafar, M.S. and Thanoon, W.A. and Mohammed, T.A. and Noorzaei, J. (2006) Debonding, slipping and crushing effects on the seismic response of a roller compacted concrete dam. Civil-Comp Proceedings, 83. ISSN 17593433

Thanoon, W.A. and Noorzaei, J. and Jaafar, M.S. (2006) Inelastic analysis of reinforced concrete beams strengthened with CFRP. Civil-Comp Proceedings, 83. ISSN 17593433

V

Vasant, P. (2006) Fuzzy decision making of profit function in production planning using S-curve membership function. Computers and Industrial Engineering, 51 (4). pp. 715-725. ISSN 03608352

Vasant, P. and Barsoum, N.N. (2006) Fuzzy optimization of units products in mix-product selection problem using fuzzy linear programming approach. Soft Computing, 10 (2). pp. 144-151. ISSN 14327643

Vasant, P. and Bhattacharya, A. and Barsoum, N.N. (2006) Fuzzy patterns in multi-level of satisfaction for MCDM model using modified smooth S-curve MF. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 3614 L. pp. 1294-1303. ISSN 03029743

Vasant, P.M. (2006) Fuzzy production planning and its application to decision making. Journal of Intelligent Manufacturing, 17 (1). pp. 5-12. ISSN 09565515

W

Wilkinson, A.N. and Man, Z. and Stanford, J.L. and Matikainen, P. and Clemens, M.L. and Lees, G.C. and Liauw, C.M. (2006) Structure and dynamic mechanical properties of melt intercalated polyamide 6 - Montmorillonite nanocomposites. Macromolecular Materials and Engineering, 291 (8). pp. 917-928. ISSN 14387492

Z

Zabiri, H. and Samyudia, Y. (2006) A hybrid formulation and design of model predictive control for systems under actuator saturation and backlash. Journal of Process Control, 16 (7). pp. 693-709. ISSN 09591524