A

Al-Shatari, M. and Hussin, F.A. and Aziz, A.A. and Witjaksono, G. and Rohmad, M.S. and Tran, X.-T. (2019) An Efficient Implementation of LED Block Cipher on FPGA. In: UNSPECIFIED.

Adil, S.H. and Ebrahim, M. and Ali, S.S.A. and Raza, K. (2019) Identifying Trends in Data Science Articles using Text Mining. In: UNSPECIFIED.

Ali, F.A.M. and Karim, S.A.A. and Dass, S.C. and Skala, V. and Saaban, A. and Hasan, M.K. and Hashim, I. (2019) Visualizing the Energy of Scattered Data by Using Cubic Timmer Triangular Patches. In: UNSPECIFIED.

Amir, Z. and Said, I.M. and Jan, B.M. and Khalil, M. (2019) Molecular analysis on retardation on polyacrylamide in high salinity and high temperature conditions. In: UNSPECIFIED.

Afrooz, I.E. and Ling Chuan Ching, D. (2019) Eulerian-Lagrangian Approach Evaluation for Numerically Prediction of Fluidized Bed Hydrodynamics. In: UNSPECIFIED.

Ammar Taqvi, S.A. and Zabiri, H. and Tufa, L.D. and Fatima, S.A. and Shah Maulud, A.H. (2019) Distillation Column: Review of Major Disturbances. In: UNSPECIFIED.

Ahmad, R. and Zakaria, M.N. and Abdullahi, A.U. (2019) Hadoop MapReduce's InputSplit based Indexing for Join Query Processing. In: UNSPECIFIED.

Ahmad, K.A.B. and Othman, M. and Syed Abdullah, S.L. and Rasidah Ali, N. and Muhamat Dawam, S.R. (2019) Mango Shape Maturity Classification Using Image Processing. In: UNSPECIFIED.

Abro, A. and Sulaiman, S. and Mahamad, S. and Mean, F.O. and Awang Rambli, D.R. and Shuhaili, F.M. (2019) Assessing User Experience (UX) Interacting with Car Catalog Application Using Multi-touch Tabletop Display. In: UNSPECIFIED.

Alam, M.K. and Aziz, A.A. and Latif, S.A. and Awang, A. (2019) EEG Data Compression using Truncated Singular Value Decomposition for Remote Driver Status Monitoring. In: UNSPECIFIED.

Alam, M.K. and Aziz, A.A. and Latif, S.A. and Awang, A. (2019) Data Clustering Technique for In-Network Data Reduction in Wireless Sensor Network. In: UNSPECIFIED.

Anitha, T. and Gopu, G. and Nagarajapandian, M. and Devan, P.A.M. (2019) Hybrid Fuzzy PID Controller for Pressure Process Control Application. In: UNSPECIFIED.

Anthony, L.S. and Perumal, V. (2019) Optimization of Metal Oxide Nanostructures via Two-Step Hydrothermal Synthesis. In: UNSPECIFIED.

Atef, M. and Abdullah, M.F. and Khatib, T. and Romlie, M.F. (2019) Utilization of Artificial Neural Networks to Improve the Accuracy of a Hybrid Power System Model. In: UNSPECIFIED.

Alazzawi, A.K. and Rais, H.M. and Basri, S. and Alsariera, Y.A. (2019) PhABC: A Hybrid Artificial Bee Colony Strategy for Pairwise test suite Generation with Constraints Support. In: UNSPECIFIED.

Alaloul, W.S. and Alfaseeh, A.S. and Tayeh, B.A. and Zawawi, N.A.W.A. and Liew, M.S. (2019) Reconstruction of residential buildings post-disaster: A comparison of influencing factors. In: UNSPECIFIED.

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Chand, A. (2019) PZT based multilayer surface acoustic wave device for high frequency applications. In: UNSPECIFIED.

Ahmed, A.Y. and Khir, M.H.M. and Dennis, J.O. and Rabih, A.A.S. (2019) Electrothermal Analysis of a MetalMUMPs Device for Acetone Detection. In: UNSPECIFIED.

Abdurrahman Isa, A. and Samsuri, S. and Aini Amran, N. (2019) Integration of Maceration and Freeze Concentration for Recovery of Vitamin C from Orange Peel Waste. In: UNSPECIFIED.

Appasamy, J.S. and Kurnia, J.C. (2019) Synthesis and Evaluation of Novel TiO2-based Self-cleaning Coating Layer for Buildings. In: UNSPECIFIED.

Al Fitri, M.R. and Oktiawati, U.Y. and Paputungan, I.V. (2019) Mobile based application design of wireless motion detection for home security. In: UNSPECIFIED.

Alsubal, S. and Sapari, N.B. and Harahap, I.S.H. and Ali Mohammed Al-Bared, M. (2019) A review on mechanism of rainwater in triggering landslide. In: UNSPECIFIED.

Al Madhoun, W.A. and Firdaus, A.A. and Isiyaka, H.A. (2019) Sustainable assessment of academic buildings at Universiti Teknologi Petronas campus. In: UNSPECIFIED.

Abbasi, T. and Lann, K.H. and Ismail, I. (2019) Optimal input selection for recurrent neural network in predictive maintenance. In: UNSPECIFIED.

Albashah, N.L.S.B. and Asirvadam, V.S. and Dass, S.C. and Meriaudeau, F. (2019) Segmentation of blood clot MRI images using intuitionistic fuzzy set theory. In: UNSPECIFIED.

Almahasneh, H. and Kamel, N. and Khan, D.M. (2019) Variation in brain's effective connectivity due to driving using partial directed coherence. In: UNSPECIFIED.

Arumugam, T. and Karuppanan, S. and Ovinis, M. (2019) Residual strength analysis of pipeline with circumferential groove corrosion subjected to internal pressure. In: UNSPECIFIED.

Ayoub, M.A. and Almansour, A.O. and Hassan, A.M. (2019) A novel formula for estimating oil compressibility below bubble point pressure using group method of data handling: A comparative approach. In: UNSPECIFIED.

Aimen Isa, M. and Leng Chew, T. and Fong Yeong, Y. (2019) Studies on Different Support Seeding Conditions Applied in the Formation of NaY Zeolite Membrane. In: UNSPECIFIED.

Abdul Latiff, A.H. and Mohd Zaki, Z. and Wan Yusoff, W.I. (2019) Survey design in anisotropy media from focal beam analysis. In: UNSPECIFIED.

Ahmed, S. and Elraies, K.A. and Hanamertani, A.S. and Hashmet, M.R. and Shafian, S.R.M. and Hsia, I.C.C. (2019) Investigation of carbon dioxide foam performance utilizing different additives for fracturing unconventional shales. In: UNSPECIFIED.

Anuar, A. and Mohamad, H. and Md Rafek, A.G. (2019) Quantification of weathering profile based on durability for heterogeneous siliclastic Sedimentary rock in Malaysia. In: UNSPECIFIED.

Ahmed, M.O. and Yenduri, A. and John, K.V. (2019) Evaluation of the dynamic responses of truss spar platforms for different mooring materials in intact and damaged line conditions. In: UNSPECIFIED.

Abbas, M.K. and Low, T.J. and Abdulla, R. (2019) Automated fining system for high speed driving offences via VANET. In: UNSPECIFIED.

Alim, N.N.N.A. and Saheed, M.S.M. and Mohamed, N.M. and Saheed, M.S.M. (2019) Highly flexible and stretchable 3D graphene/MXene composite thin film. In: UNSPECIFIED.

Ameen, M. and Azizan, M.T. and Yusup, S. and Ramli, A. and Yasir, M. and Kaur, H. and Wai, C.K. (2019) H-Y zeolite as hydrodeoxygenation catalyst for diesel range hydrocarbon production from rubber seed oil. In: UNSPECIFIED.

Abdullah, M.Z.B. and Abdullah, A.N.B. and Othman, M.H.B. and Ahmad, M.A.B. and Hussain, P. (2019) Pin-on-disc tribotest of Cr/CrN/CrCN/ZrN multilayer coatings by physical vapour deposition (PVD). In: UNSPECIFIED.

Ali, M. and Ahmad, F. and Melor, P.S. and Yahya, N. and Aslam, M. (2019) Investigation of boron effect on the densification of Fe-50Ni soft magnetic alloys produced by powder metallurgy route. In: UNSPECIFIED.

Al-Mossawy, M.I. (2019) A simple approach to identify the proper relative permeability model. In: UNSPECIFIED.

Al-Sabaeei, A. and Napiah, M. and Sutanto, M. and Alaloul, W. (2019) Effects of Waste Denim Fibre (WDF) on the physical and rheological properties of bitumen. In: UNSPECIFIED.

Ani, M.N.C. and Kamaruddin, S. and Azid, I.A. (2019) Streamlining the flow of production system through elimination the waste of the overburden (muri) for manual handling process. In: UNSPECIFIED.

Alshaikh, M. and Lee, Y.S. and Hascakir, B. (2019) Anionic surfactant and heavy oil interaction during surfactant-steam process. In: UNSPECIFIED.

Abbas, M.K. and Jung, L.T. and Abdulla, R. (2019) An automated software-agents system for detecting road speed limit offences. In: UNSPECIFIED.

Alsiyabi, K. and AL-Aamri, M. and Siddiqui, N.A. (2019) Effective geomechanic approach for wellbore stability analysis. In: UNSPECIFIED.

B

Biswas, K. and Vasant, P.M. and Vintaned, J.A.G. and Watada, J. (2019) Metaheuristic Algorithm for Wellbore Trajectory Optimization. In: UNSPECIFIED.

Bhaskarwar, T. and Chile, R. and Aole, S. and Elamvazuthi, I. (2019) Remote Monitoring of Coupled Tank Accompanied by PLC-OPC-MATLAB Architecture. In: UNSPECIFIED.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. and Elamvazuthi, I. and Devan, A.M. (2019) Design and Analysis of Fractional-order Oscillators Using Scilab. In: UNSPECIFIED.

Borhan, A. and Hamidi, M.N.R. (2019) Modification of rubber-seed shell activated carbon using chitosan for removal of Cu2+ and Pb2+ from aqueous solution. In: UNSPECIFIED.

Baseer, F. and Jaafar, J. and Habib, A. (2019) Gender and age identification through romanized Urdu dataset. In: UNSPECIFIED.

Babasafari, A.A. and Ghosh, D.P. (2019) New anisotropic parameter to enhance lithology identification in Clastic reservoir. In: UNSPECIFIED.

Bashir, Y. and Ghosh, D.P. and Babasafari, A. (2019) Wave Propagation Characteristics using Advance Modelling Algorithm for D-Data imaging. In: UNSPECIFIED.

Bashir, M.J.K. and Ng, C.A. and Sethupathi, S. and Lim, J.W. (2019) Assessment of the Environmental, Technical and Economic Issues Associated with Energy Recovery from Municipal Solid Waste in Malaysia. In: UNSPECIFIED.

Baig, I. and Farooq, U. and Hasan, N.U. and Zghaibeh, M. and Jeoti, V. and Imran, M. (2019) A Low PAPR Universal Filtered Multi-Carrier System for 5G Machine Type Communications. In: UNSPECIFIED.

Biyanto, T.R. and Musyafa, A. and Cordova, H. and Matradji and Prasetyo, A. and Zabiri, H. and Sordi, A. and Sapika, N. (2019) Comparison on PID controller performance for multivariable system between de-tuned method and optimization method. In: UNSPECIFIED.

Babiker, A. and Faye, I. and Malik, A.S. and Sato, H. (2019) Studying the effect of lecture content on students� EEG data in classroom using SVD. In: UNSPECIFIED.

Basri, A.Q. and Mohamed, N.M.Z.N. and Yasir, K.A.S.H.M. and Fazi, H.M. and Fudzin, A.F. (2019) The validation of productivity on the changeover activity at the automotive stamping press line by comparing the embedded SMED frame-work versus SMED approach: A witness simulation case study. In: UNSPECIFIED.

Bahrudin, M.N.H.M. and Mukhtar, A.N. and Hagos, F.Y. and Mamat, R. and Abdullah, A.A. and Karim, Z.A.A. (2019) Comparison between tri-fuel (diesel-ethanol-biodiesel) emulsion with and without surfactant. In: UNSPECIFIED.

Bin Ayob, F. and Bin Hussain, P. and Abdullah, A.B. and Bin Abdul Rahim, A.A. and Bin Baharudin, B.A. (2019) Unconventional approach in the study of diffusion welding of marine grades grey cast iron to low carbon steel. In: UNSPECIFIED.

Bashir, Y. and Babasafari, A.A. and Biswas, A. and Hamidi, R. and Alashloo, S.Y.M. and Janjuah, H.T. and Ghosh, D.P. and Sum, C.W. (2019) Cohesive approach for high-resolution seismic using inversion & Imaging in Malaysian carbonate field. In: UNSPECIFIED.

Banerjee, A. and Ghosh, D.P. and Salim, A.M.A. and Zakaria, A.A. (2019) Sub-surface investigation in the frontier region of deep-water NW Sabah, Malaysia. In: UNSPECIFIED.

Bashir, Y. and Latif, A.H.A. and Rezaei, S. and Mahgoub, M. and Alashloo, S.Y.M. and Hermana, M. and Ghosh, D.P. and Sum, C.W. (2019) Seismic diffraction imaging in laterally varying velocity media for frequency bandwidth expansion - Application in carbonate field Sarawak, Malaysia. In: UNSPECIFIED.

Bavoh, C.B. and Lal, B. and Ben-Awuah, J. and Khan, M.S. and Ofori-Sarpong, G. (2019) Kinetics of Mixed Amino Acid and Ionic Liquid on CO2 Hydrate Formation. In: UNSPECIFIED.

Babasafari, A.A. and Ghosh, D.P. and Salim, A.M.A. and Ratnam, T. and Sambo, C. and Rezaee, S. (2019) Petro Elastic Modeling for enhancement of hydrocarbon prediction: Case study in SE Asia. In: UNSPECIFIED.

C

Choo, H.S. and Ooi, C.Y. and Inoue, M. and Ismail, N. and Moghbel, M. and Baskara Dass, S. and Kok, C.H. and Hussin, F.A. (2019) Machine-Learning-Based Multiple Abstraction-Level Detection of Hardware Trojan Inserted at Register-Transfer Level. In: UNSPECIFIED.

Chuan, C.Y. and Sovuthy, C. (2019) Design and Synthesis of Parallel Connected Chained Function Filter. In: UNSPECIFIED.

Chong, J.S. and Lu, C.-K. and Tang, T.B. (2019) Study of emotional state effect on decision making by using fNIRS. In: UNSPECIFIED.

Chitturi, V. and Rao Pedapati, S. and Awang, M. (2019) A Review on Process Parameters and their effects on Dissimilar Friction Stir Welding of Aluminium and Steel Alloys. In: UNSPECIFIED.

Challa, P. and Sahith, S.J.K. and Rao, K.V. and Pedapati, S.R. (2019) Hydraulic modeling for upstream gas production planning and allocation - Significance, challenges, and recommendations. In: UNSPECIFIED.

Chew, T.L. and Husni, H. (2019) Oil palm frond for the adsorption of Janus Green dye. In: UNSPECIFIED.

Cheng, S.W.Y. and Kurnia, J.C. and Sasmito, A.P. and Lubis, L.A. (2019) The effect of triangular protrusions on geothermal wellbore heat exchanger from retrofitted abandoned oil wells. In: UNSPECIFIED.

D

Devan, P.A.M. and Hussin, F.A. and Ibrahim, R. and Bingi, K. and Nagarajapandian, M. (2019) IoT Based Vehicle Emission Monitoring and Alerting System. In: UNSPECIFIED.

Duc Chung, T. and Ibrahim, R.B. (2019) Building Ambient Temperature Measurement using Industrial Wireless Mesh Technology. In: UNSPECIFIED.

Daud, N.A.B. and Abouzari Lotf, E. and Sophia Sha'Rani, S. and Nasef, M.M. and Ahmad, A. and Rasit Ali, R. (2019) Efforts to Improve PBI/Acid Membrane System for High Temperature Polymer Electrolyte Membrane Fuel Cell (HT-PEMFC). In: UNSPECIFIED.

Danish, M. and Ginta, T.L. and Rani, A.M.A. and Carou, D. and Davim, J.P. and Rubaiee, S. and Ghazali, S. (2019) Investigation of surface integrity induced on AZ31C magnesium alloy turned under cryogenic and dry conditions. In: UNSPECIFIED.

E

Ejaz, M.M. and Tang, T.B. and Lu, C.-K. (2019) Autonomous Visual Navigation using Deep Reinforcement Learning: An Overview. In: UNSPECIFIED.

Egambaram, A. and Badruddin, N. and Asirvadam, V.S. and Fauvet, E. and Stolz, C. and Begum, T. (2019) Automated and Online Eye Blink Artifact Removal from Electroencephalogram. In: UNSPECIFIED.

Esbitan, S.M.Y. and Albarody, T.M.B. (2019) Molecular Dynamics Simulation and Visualization Parallelism of Structronics. In: UNSPECIFIED.

F

Fatima, S.A. and Zabiri, H. and Ammar Taqvi, S.A. and Ramli, N. (2019) System Identification of Industrial Debutanizer Column. In: UNSPECIFIED.

Fauzi, M.F.A.M. and Aziz, I.A. and Amiruddin, A. (2019) The Prediction of Remaining Useful Life (RUL) in Oil and Gas Industry using Artificial Neural Network (ANN) Algorithm. In: UNSPECIFIED.

Fudzin, A.F. and Mokhtar, A.A. and Amin, M. and Basri, A.Q. (2019) Analytical hierarchy process application of body in white modular sub-assembly for automotive manufacturing in Malaysia - A case study. In: UNSPECIFIED.

Fuad, I.I.M. and Rosli, L.H. and Husni, H. (2019) Application of hybrid ARIMA - Decision tree algorithm in reservoir pressure surveillance. In: UNSPECIFIED.

Fong, M. and Alzoubi, M. and Sasmito, A.P. and Kurnia, J.C. (2019) Performance evaluation of ground-coupled seasonal thermal energy storage with high resolution weather data: Case study of Calgary Canada. In: UNSPECIFIED.

G

Gouda, M. and Salim, A.M.A. and Hamada, G. (2019) Estimation of anisotropy-free acoustic impedance from partial-stack seismic inversion: A case study from Inas Field, Malay Basin. In: UNSPECIFIED.

Ghazali, M.F. and Mohamad, H. (2019) Monitoring subsurface ground movement using fibre optic inclinometer sensor. In: UNSPECIFIED.

H

Hasnen, S.H. and Zabiri, H. and Prakash, K.K. and Mat, T.T. (2019) Adaptive PLS inferential soft sensor for continuous online estimation of NOx emission in industrial water-tube boiler. In: UNSPECIFIED.

Hamid, M.S.A. and Shafiq, N. and Musir, A.A. and Rosseli, S.R. (2019) Classification of reinforced concrete single story and double story house using eco-efficiency index approach. In: UNSPECIFIED.

Hamid, M.S.A. and Jasni, O.O. and Shafiq, N. (2019) Eco-efficiency index analysis of single story structure of reinforced concrete house using economical and environmental score approach. In: UNSPECIFIED.

Hassan, N.H. and Arshad, N.I. (2019) Proposing construct for organizational agility model in Malaysian automotive organization. In: UNSPECIFIED.

Hamzah, M.H. and Saaid, I.M. and Idris, A.K. (2019) Particle stability of nano-zinc oxide and nano-silica in sodium silicate solution. In: UNSPECIFIED.

Haruna, A.A. and Muhammad, L.J. and Yahaya, B.Z. and Garba, E.J. and Oye, N.D. and Jung, L.T. (2019) An Improved C4.5 Data Mining Driven Algorithm for the Diagnosis of Coronary Artery Disease. In: UNSPECIFIED.

Hacks, S. and Hofert, H. and Salentin, J. and Yeong, Y.C. and Lichter, H. (2019) Towards the definition of enterprise architecture debts. In: UNSPECIFIED.

Hafeez, Y. and Ali, S.S.A. and Faraz, S. and Moinuddin, M. and Adil, S.H. (2019) Effect of Neurofeedback 2D and 3D Stimulus Content on Stress Mitigation. In: UNSPECIFIED.

Hamsan, N.H. and Mansor, M.Y. and Kiat, L.K. (2019) Detection and Delineation of Shallow Channel Morphology Using 3D Seismic Data in the K Field, Malay Basin, Malaysia. In: UNSPECIFIED.

Hashim, H. and Yusup, S. and Arlabosse, P. (2019) Extraction of crude palm oil (CPO) using thermally assisted mechanical dewatering (TAMD) and their characterization during storage. In: UNSPECIFIED.

Harun, N.Y. and Jian, T.M. and Jusoh, N. and Ramli, R.M. (2019) Application of response surface methodology to investigate the effect of different variables on fusion slagging index. In: UNSPECIFIED.

Hastuty, S. and Zacharias, P. and Awwaluddin, M. and Krismawan and Setiawan, P.H. and Siswanto, E. and Santoso, B. and Nugroho, A. and Abdul-Rani, A.M. (2019) Considerations of Material Selection for Control Rod Drive Mechanism of Reaktor Daya Eksperimental. In: UNSPECIFIED.

Hamamoto, M. and Rahim Md Arshad, A. and Prasad Ghosh, D. (2019) Full waveform inversion based on genetic local search algorithm with hybrid-grid scheme. In: UNSPECIFIED.

Hamidi, R. (2019) Deep learning application in time-frequency analysis for noise attenuation. In: UNSPECIFIED.

Husna, O.N. and Ismail, M.C. and Mustapha, M. (2019) Mechanical and anticorrosive properties of epoxy containing modified graphene Oxide hybrids. In: UNSPECIFIED.

Hassan, A.M. and Ayoub, M. and Eissa, M. and Bruining, H. and Al-Mansour, A. and Al-Guraishi, A. (2019) A novel hybrid enhanced oil recovery method by smart water-injection and foam-flooding in carbonate reservoirs. In: UNSPECIFIED.

Hamidi, R. and Ghosh, D. (2019) Seismic attribute feasibility study for fault and fracture analysis and integration with spectral decomposition: Application in Sarawak basin. In: UNSPECIFIED.

Hashim, H. and Arshad, A.R. and Abdul Latiff, A.H. (2019) Sparse CL-SRME using impulse response and source wavelet: Method and applications. In: UNSPECIFIED.

Han, D. and Kwon, S. and Son, H. and Lee, J. (2019) Production forecasting for shale gas well in transient flow using machine learning and decline curve analysis. In: UNSPECIFIED.

Hashim, H. and Tang, Y.M. and Abdul Latiff, A.H. and Ghosh, D.P. (2019) Elimination of internal multiple using inverse scattering series in Malay Basin - A case study. In: UNSPECIFIED.

Hamid, F.A. and Saad, M.N.M. and Malik, A.S. (2019) Characterization stress reactions to stroop color-word test using spectral analysis. In: UNSPECIFIED.

Hussain, M. and Tufa, L.D. and Yusup, S. and Zabiri, H. (2019) Characterization of coal bottom ash &its potential to be used as catalyst in biomass gasification. In: UNSPECIFIED.

Hussain, M. and Tufa, L.D. and Yusup, S. and Zabiri, H. (2019) Thermochemical behavior and characterization of palm kernel shell via TGA/DTG technique. In: UNSPECIFIED.

Huey, C.E. and Yahya, W.Z.N. and Mansor, N. (2019) Allicin incorporation as urease inhibitor in a chitosan/starch based biopolymer for fertilizer application. In: UNSPECIFIED.

Hidayah, N.M.S. and Liu, W.W. and Khe, C.S. and Lai, C.W. and Noriman, N.Z. and Hashim, U. (2019) Synthesis and characterization of alkylated graphene oxide (AGO) and reduced graphene oxide (ARGO). In: UNSPECIFIED.

Ho, C. and Ayoub, M.A. (2019) Effect of salinity, single and binary ionic compounds' low salinity water on wettability alteration in carbonate rocks. In: UNSPECIFIED.

Hamdi, Z. and Momeni, M.S. and Meyghani, B. and Zivar, D. and Chung, B.Y. and Bataee, M. and Asadian, M.A. (2019) Oil well compressive strength analysis from sonic log; A case study. In: UNSPECIFIED.

Hussain, A. and Vincent-Bonnieu, S. and Kamarul Bahrim, R. and Pilus, R. and Rossen, W. (2019) Impact of crude oil on pre-generated foam in porous media. In: UNSPECIFIED.

Hashim, H. and Tang, Y.M. and Abdul Arshad, A.R. and Abdul Latiff, A.H. (2019) Elimination of shallow water multiple through sparse inversion in offshore Malay basin - A case study. In: UNSPECIFIED.

I

Isa, F. and Zabiri, H. and Shaarif, M.A. (2019) CO2 removal via promoted potassium carbonate with glycine: Solubility measurement at elevated pressure. In: UNSPECIFIED.

Isa, N.F.M. and Shafie, A. and Zainuddin, N. (2019) An empirical model and sensitivity analysis for silica oxide in enhanced oil recovery. In: UNSPECIFIED.

Irfan, M. and Saad, N. and Ali, A. and Vinoth Kumar, K. and Aman Sheikh, M. and Awais, M. (2019) A Condition Monitoring System for the Analysis of Bearing Distributed Faults. In: UNSPECIFIED.

Islam, J. and Vasant, P.M. and Negash, B.M. and Watada, J. (2019) A modified crow search algorithm with niching technique for numerical optimization. In: UNSPECIFIED.

Iampita, I.M. and Hisham, S.B. (2019) Smith Predictor-based Controllers for Temperature Process with Time Delay. In: UNSPECIFIED.

Iqbal, A. and Jeoti, V. and Drieberg, M. and Wen, W.P. (2019) A Time-Domain Channel Impulse Response Estimation Method for an OFDM Sounding System. In: UNSPECIFIED.

Ismail, N.S. and Sovuthy, C. (2019) Breast Cancer Detection Based on Deep Learning Technique. In: UNSPECIFIED.

Irawan, A. and Witjaksono, G. and Wibowo, W.K. (2019) Deep Learning for Polar Codes over Flat Fading Channels. In: UNSPECIFIED.

Idress, M. and Luqman Hasan, M. and Devi Vijaya Kumar, S. (2019) Performance Evaluation of Commercial Lost Circulation Materials. In: UNSPECIFIED.

Ismail, A. and Awang, M. and Rahman, F.A. and Megat Khalid, P.Z. and Baharudin, B.A. and Rojan, M.A. and Hamid, D.A. (2019) The Effects of Welding Parameters on Macro and Micro-Structure of Friction Stir Welded Aluminium. In: UNSPECIFIED.

J

Javaid, A. and Muthuvalu, M.S. and Sulaiman, J. and Ismail, M.T. and Ali, M.K.M. (2019) Forecast the moisture ratio removal during seaweed drying process using solar drier. In: UNSPECIFIED.

Jian, Z. and Sakai, H. and Watada, J. and Roy, A. and Hassan, M.H.B. (2019) An Apriori-based Data Analysis on Suspicious Network Event Recognition. In: UNSPECIFIED.

Jakeri, M.M. and Hassan, M.F. (2019) Criteria Prioritization in Adaptive Security Activities Selection, ASAS Model using Analytic Network Process, ANP. In: UNSPECIFIED.

Jameel, S.M. and Hashmani, M.A. and Hussain, H.A. and Rehman, M. and Budiman, A. (2019) Deleterious effects of uncertainty in color imagery streams on classification models. In: UNSPECIFIED.

Junaid, M. and Witjaksono, G. (2019) Analysis of band gap in AA and Ab stacked bilayer graphene by Hamiltonian tight binding method. In: UNSPECIFIED.

Jusoh, S.N. and Yusufiansyah, D. and Mohamad, H. and Abdullah, R.A. and Mohd Yunus, N.Z. (2019) Geotechnical aspects of tunnel lining with segmental joint parameters to improve soil surface settlement prediction. In: UNSPECIFIED.

Jawed, S. and Amin, H.U. and Malik, A.S. and Faye, I. (2019) EEG visual and non- Visual learner classification using LSTM recurrent neural networks. In: UNSPECIFIED.

Janssen, M. and Mutawa, A. and Pilus, R. and Zitha, P. (2019) Evaluation of foam-assisted surfactant flooding at reservoir conditions. In: UNSPECIFIED.

Jalil, A.A.M. and Faudzi Mat Isa, M. and Rostani, K. and Othman, N.A. and Shariff, A.M. and Lau, K.K. and Partoon, B. and Tay, W.H. (2019) Design and engineering implementation of blowdown system for cryogenic CO2- NG pilot facility. In: UNSPECIFIED.

K

Kuo, J.-T. and Wang, C.-C. and Ng, C.L. and Lin, C.-H. and Wong, P.W. (2019) New alternative realizations of a cross coupled quadruplet bandpass filter. In: UNSPECIFIED.

Kok, C.H. and Ooi, C.Y. and Inoue, M. and Moghbel, M. and Baskara Dass, S. and Choo, H.S. and Ismail, N. and Hussin, F.A. (2019) Net Classification Based on Testability and Netlist Structural Features for Hardware Trojan Detection. In: UNSPECIFIED.

Khan, F.U. and Aziz, I.B.A. (2019) Reducing high variability in medical image collection by a novel cluster based synthetic oversampling technique. In: UNSPECIFIED.

Khan, Z. and Yahya, N. and Alsaih, K. and Meriaudeau, F. (2019) Zonal Segmentation of Prostate T2W-MRI using Atrous Convolutional Neural Network. In: UNSPECIFIED.

Krishnamurthy, S. and Kannan, R. and Hussin, F.A. and Yahya, E.A. (2019) Enhanced Trench Shielded Power UMOSFET for Single Event Burnout Hardening. In: UNSPECIFIED.

Kumar, P. and Norkakim, N.N. and Mohamed Saheed, M.S. and Burhanudin, Z.A. (2019) Optimization of CO2 laser power for patterning of single-layer graphene for advanced devices applications. In: UNSPECIFIED.

Khahro, S.H. and Matori, A.N. and Chandio, I.A. and Talpur, M.A.H. (2019) Data Preparation for GIS based Land Suitability Modelling: A Stepped Approach. In: UNSPECIFIED.

Kadir, E.A. and Siswanto, A. and Rosa, S.L. and Syukur, A. and Irie, H. and Othman, M. (2019) Smart sensor node of WSNs for river water pollution monitoring system. In: UNSPECIFIED.

Ko, C.-E. and Chen, P.-H. and Liao, W.-M. and Lu, C.-K. and Lin, C.-H. and Liang, J.-W. (2019) Using A Cropping Technique or Not: Impacts on SVM-based AMD Detection on OCT Images. In: UNSPECIFIED.

Klufallah, M. and Ibrahim, I.S. and Moayedi, F. (2019) Sustainable practices barriers towards green projects in Malaysia. In: UNSPECIFIED.

Kamble, R.M. and Kokare, M. and Chan, G.C.Y. and Perdomo, O. and González, F.A. and Müller, H. and Mériaudeau, F. (2019) Automated Diabetic Macular Edema (DME) analysis using fine tuning with inception-resnet-v2 on oct images. In: UNSPECIFIED.

Khan, A.A.A. and Ajab, H. and Yaqub, A. and Abdullah, M.A. (2019) Bismuth/hydroxyapatite-modified carbon screen-printed electrode for heavy-metal ion detection in aqueous media. In: UNSPECIFIED.

Kassim, Z. and Saad Khan, M. and Lal, B. (2019) Thermodynamic modelling on methane hydrate equilibrium condition in the presence of electrolyte inhibitor. In: UNSPECIFIED.

Kassim, Z. and Rahman, F.H. and Lal, B. (2019) Dual function hydrate inhibitor for prevention of hydrate in methane and carbon dioxide system. In: UNSPECIFIED.

Kayode, J.S. and Arifin, H. and Nawawi, M. and Khalil, A. and Baioumy, H. (2019) Characterization of the hot spring aquifers at Sungai Klah using potential fields geophysical methods. In: UNSPECIFIED.

Kok, T.L. and Aldrich, C. (2019) Analysis of Electrochemical Noise for Corrosion Type Identification by Use of Global Recurrence Plots and Texture Analysis. In: UNSPECIFIED.

Khan, Z.R. and Ganat, T. and Aris, J. and Ridha, S. (2019) Detecting harmful parameters of produced water and drilling waste from smart phone through things speak app: Case study from the mediterranean region. In: UNSPECIFIED.

Kamal, N.L.M. and Beddu, S. and Syamsir, A. and Mohammad, D. and Itam, Z. and Hamid, Z.A.A. and Manan, T.S.A. (2019) Immobilization of heavy metals for building materials in the construction industry - An overview. In: UNSPECIFIED.

Kuo, W.-L. and Lee, H.-X. and Hsieh, S.-H. (2019) Designing a Database Schema for Supporting Visual Management of Variable Parameters in BIM Models. In: UNSPECIFIED.

Kim, Y. and Yeom, S. and Yoon, S. and Kim, J.-K. and Kwon, S. and Hwang, S. and Shariff, A.B. (2019) Development and demonstration of novel cryogenic distillation process for offshore gas platform. In: UNSPECIFIED.

L

Lin, C.-H. and Ng, C.L. and Wong, P.W. and Kuo, J.-T. (2019) Power divider and balun filters with a single cross-coupled quadruplet. In: UNSPECIFIED.

Lakhina, U. and Elamvazuthi, I. and Badruddin, N. and Meriaudeau, F. and Ramasamy, G. and Jangra, A. (2019) Multi-Agent Based Energy Management in Microgrids Using MACSimJX. In: UNSPECIFIED.

Law, D. and Mohd Noh, K.A. and Md Rafek, A.G. (2019) Application of Transient Electromagnetic (TEM) Method for Delineation of Mineralized Fracture Zones. In: UNSPECIFIED.

Lim, E.S. and Liew, M.S. (2019) Nonlinear System Identification of Structures Subject to Stochastic Loadings. In: UNSPECIFIED.

Latiff, A.H.A. and Esmail Khalil, A. (2019) Seismic Site Effect along Bukit Tinggi Fault Line from Microtremor Analysis. In: UNSPECIFIED.

Lim, E.S. and Lee, H.E. and Liew, M.S. (2019) Forensic investigation of a slender high-rise structure subject to dynamic wind conditions. In: UNSPECIFIED.

Lim, J.M. and Al Madhoun, W. and Yee, C.M. and Nair, G. and Siong, W.S. and Isiyaka, H.A. (2019) Factors influencing customer intention to stay in green hotel in Malaysia. In: UNSPECIFIED.

Latif, W.M.S.M. and Sharbini, S.N. and Wan Sulaiman, W.R. and Idris, A.K. (2019) Utilization of silicon dioxide nanoparticles in foam enhanced oil recovery - A comprehensive review. In: UNSPECIFIED.

Liu, C. and Ghosh, D. and Salim, A.M.A. and Chow, W.S. (2019) Fluid discrimination using bulk modulus and neural network. In: UNSPECIFIED.

Lee, S.C. and Tee, B.P. and Chong, M.F. and Ku Mahamud, K.M.S. and Mohamad, H. (2019) Structural assessment for an old steel railway bridge under static and dynamic loads using fibre optic sensors. In: UNSPECIFIED.

Lee, W.Y. and Hamidi, R. and Ghosh, D. and Musa, M.H. (2019) Signal to noise ratio enhancement using empirical wavelet transform. In: UNSPECIFIED.

Luluan, L. and Hermana, M. and Ghosh, D. and Weng Sum, C. (2019) Uncertainty analysis in elastic and electrical properties of hydrocarbon reservoir: Pitfalls and propose solutions. In: UNSPECIFIED.

Lichter, H. and Sunetnanta, T. and Anwar, T. (2019) Preface of the 7th international workshop on quantitative approaches to software quality (QuASoQ 2019). In: UNSPECIFIED.

Low, J.Y. and Aljunid Merican, Z.M. and Hamza, M.F. (2019) Polymer light emitting diodes (PLEDs): An update review on current innovation and performance of material properties. In: UNSPECIFIED.

Liew, C.F. and Prakash, J. and Kamaruddin, S. and Ong, K.S. (2019) Deployment of an FMEA-Integrated Framework to Improve Operational Performance in Semiconductor Manufacturing: A Case Study. In: UNSPECIFIED.

Latif, N.A.A. and Abidin, I.M.Z. and Azaman, N. and Jamaludin, N. and Mokhtar, A.A. (2019) A Feature Extraction Technique Based on Factor Analysis for Pulsed Eddy Current Defects Categorization. In: UNSPECIFIED.

Lew, C.L. and Hermana, M. and Ghosh, D.P. (2019) Improvised approach using SQP-SQS attributes for hydrocarbon prediction: A field case study in Malay basin. In: UNSPECIFIED.

M

Mansur, F.Z. and Faizal, C.K.M. and Samad, A.F.A. and Atnaw, S.M. and Sulaiman, S.A. (2019) Performance modelling and validation on co-gasification of coal and sawdust pellet in research-scale downdraft reactor. In: UNSPECIFIED.

Masri, H.L. and Kalid, K.S. (2019) GrouPro: Developing a group-formation system to support collaborative learning in group projects. In: UNSPECIFIED.

Masroor, K. and Jeoti, V. and Drieberg, M. (2019) Analyzing the effects of LED lamp arrangements on performance of an indoor visible light communication system. In: UNSPECIFIED.

Mathe, R.P. and Ali, S.S.A. and Gilani, S.I.U.H. and Adil, S.H. and Ebrahim, M. (2019) Advanced Bio-Sensing System for Thermal Ambience Comfort. In: UNSPECIFIED.

Mazelan, F.N. and Kannan, R. and Hasan, K.N.M. and Ali, A. (2019) Multi-Input Power Converter for Renewable Energy Sources using Active Current Sharing Schemes. In: UNSPECIFIED.

Mutharpavalar, A.A.P. and Sebastian, P. (2019) Measuring of Real-Time Traffic Flow Using Video from Multiple IP-Based Cameras. In: UNSPECIFIED.

Masrom, S. and Mohd, T. and Jamil, N.S. and Rahman, A.S.A. and Baharun, N. (2019) Automated machine learning based on genetic programming: A case study on a real house pricing dataset. In: UNSPECIFIED.

Mohideen, A.A.M. and Saheed, M.S.M. and Mohamed, N.M. (2019) Multiwalled carbon nanotubes and graphene oxide as nano-additives in water-based drilling fluid for enhanced fluid-loss-control & gel strength. In: UNSPECIFIED.

Muhaiyuddin, N.D.M. and Rambli, D.R.A. (2019) Assessment of spatial presence model for image-based virtual reality. In: UNSPECIFIED.

Mansura, A. and Drieberg, M. and Aziz, A.A. and Bassoo, V. (2019) Multi-Energy Threshold-based Routing Protocol for Wireless Sensor Networks. In: UNSPECIFIED.

Mathialagan, R. and Mansor, N. and Shamsuddin, M.R. (2019) Kinetic properties of soil urease inhibited by allicin and NBPT (N-(n-butyl) thiophosphoric triamide). In: UNSPECIFIED.

Mohd Norhakim, N.N.H.B. and Arif Bin Burhanudin, Z. (2019) Correlation of charge neutrality point and ions capture in DNA-graphene field-effect transistor using drift-diffusion model. In: UNSPECIFIED.

Mahzabin, M.S. and Jee Hock, L. and Siong Kang, L. and Nikbakht Jarghouyeh, E. (2019) Behaviour of kenaf fibre reinforced composite. In: UNSPECIFIED.

Mathur, N. and Asirvadam, V.S. and Abd Aziz, A. and Ibrahim, R. (2019) Fault Tree Analysis for Control Valves in Process Plants by using R. In: UNSPECIFIED.

Mohamad, N.A. and Abouzari Lotf, E. and Mohamed, M.N. and Arshad, A. and Abdullah, T. (2019) A comparison of CO2 adsorption behaviour of mono-and diamine-functionalised adsorbents. In: UNSPECIFIED.

Moayedi, F. and Amila Wan Abdullah Zawawi, N. and Shahir Liew, M. (2019) A Systematic Approach to Embodied Carbon Reduction in Buildings. In: UNSPECIFIED.

Moayedi, F. and Amila Wan Abdullah Zawawi, N. and Shahir Liew, M. (2019) Building life cycle analysis toward low carbon emission and energy efficiency. In: UNSPECIFIED.

Mahamad, S. and Farid Mohd Zaid, M. (2019) An Automatic Power Cut-off Appliance with Smart Battery Optimizer. In: UNSPECIFIED.

Mohamad, M. and Mohammad, R. and May, T.S. and Wei, L.J. (2019) Removal of malachite green by sugarcane bagasse biochar using response surface methodology. In: UNSPECIFIED.

Mazher, M. and Faye, I. and Qayyum, A. and Malik, A.S. (2019) Classification of resting and cognitive states using EEG-based feature extraction and connectivity approach. In: UNSPECIFIED.

Mawardzi, M.F.R.M. and Japper-Jaafar, A. and Najib, M.S. and Daud, S.M. and Ya, T.M.Y.S.T. (2019) Classification of waxy crude oil odor-profile using gas sensor array. In: UNSPECIFIED.

Mawardzi, M.F.R.M. and Japper-Jaafar, A. and Najib, M.S. and Daud, S.M. and Ya, T.M.Y.S.T. (2019) Intelligent classification of waxy crude oil odor-profile at different temperature. In: UNSPECIFIED.

Md Jalil, A.A.M. and Faudzi Mat Isa, M. and Rostani, K. and Othman, N.A. and Shariff, A.M. and Lau, K.K. and Partoon, B. and Tay, W.H. (2019) Design and engineering implementation of blowdown system for cryogenic CO2- NG pilot facility. In: UNSPECIFIED.

Majid, M.F.B. and Binti, M.Z.H.F. and Kait, C.F. and Ghani, N.B.A. and Saidon, N.B. (2019) Physical properties of dihydric Alcohol-based deep eutectic solvent for integrated fuel oil desulfurization. In: UNSPECIFIED.

Masyhur, E.M.H. and Rafek, A.G.M. and Noh, K.A.M. (2019) Utilization of air wave to determine the quality of seismic refraction data in near surface geophysical survey. In: UNSPECIFIED.

Mahmud, A. and Megat-Yusoff, P.S.M. and Ahmad, F. (2019) Synthesis and evaluation of poly octanediol citrate / nano silica composite. In: UNSPECIFIED.

Meyghani, B. and Awang, M.B. and Poshteh, R.G.M. and Momeni, M. and Kakooei, S. and Hamdi, Z. (2019) The Effect of Friction Coefficient in Thermal Analysis of Friction Stir Welding (FSW). In: UNSPECIFIED.

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. (2019) Thermal properties of cool asphalt concrete containing phase change material. In: UNSPECIFIED.

Meyghani, B. and Awang, M.B. and Momeni, M. and Rynkovskaya, M. (2019) Development of a Finite Element Model for Thermal Analysis of Friction Stir Welding (FSW). In: UNSPECIFIED.

Mokhtar, S. (2019) Integrated electrofacies characterisation of X-field, central luconia. In: UNSPECIFIED.

Mohamad, A.M. and Hamada, G.M. and Salim, A.M. (2019) Determination techniques of Archie's parameters, A, M and N and its relevant impact on water saturation values in sandstone core samples. In: UNSPECIFIED.

N

Nasir, N.A.A.M. and Ishak, A. and Pop, I. and Zainuddin, N. (2019) MHD stagnation point flow over a permeable stretching/shrinking sheet with a heat sink and radiation effects. In: UNSPECIFIED.

Norzam, W.A.S. and Hawari, H.F. and Kamarudin, K. (2019) Analysis of Mobile Robot Indoor Mapping using GMapping Based SLAM with Different Parameter. In: UNSPECIFIED.

Nasir, N.A.A.M. and Ishak, A. and Pop, I. and Zainuddin, N. (2019) MHD stagnation point flow towards a quadratically stretching/shrinking surface. In: UNSPECIFIED.

Nagarajapandian, M. and Kanthalakshmi, S. and Anitha, T. and Devan, P.A.M. (2019) Linear Matrix Inequality Based Controller used in Multivariable Systems. In: UNSPECIFIED.

Nurhanim, K. and Elamvazuthi, I. and Izhar, L.I. and Capi, G. (2019) Feature selection of Human Daily Activities using Ensemble method Classification. In: UNSPECIFIED.

Nawaz, M. and Maulud, A.S. and Zabiri, H. (2019) Online process monitoring using multiscale principal component analysis. In: UNSPECIFIED.

Narahari, M. and Ilyas, S.U. and Pendyala, R. (2019) Unsteady free convective non-homogeneous nanofluid flow past a moving vertical plate. In: UNSPECIFIED.

Naser Reda, M. and Spinnler, M. and Al-Kayiem, H. and Sattelmayer, T. (2019) Experimental investigation of temperature and condensation control of photovoltaic panels. In: UNSPECIFIED.

Nur Liyana Zakaria, W.W. and Kee, K.E. and Ismail, M.C. (2019) The effect of sensitization treatment on chloride induced stress corrosion cracking of 304L stainless steel using U-bend test. In: UNSPECIFIED.

Nakayama, A. and Nizamani, Z. and Uchiyama, Y. and Cheng Yee, N. and Osman, M. (2019) EVALUATION OF HYDRODYNAMIC LOADS ON OFFSHORE TRUSS STRUCTURE USING LARGE EDDY SIMULATION METHOD. In: UNSPECIFIED.

Nasha Musa, N. and Zulaikha Yusof, N. (2019) Chemical and Physical Parameters Affecting Bacterial Pigment Production. In: UNSPECIFIED.

Nashrom, F.I.R. and Saheed, M.S.M. and Kait, C.F. (2019) Development of janus polymer/carbon nanotubes hybrid membrane for oil-water separation. In: UNSPECIFIED.

Naseer, A. and Ahmad, F. and Muhsan, A.S. and Aslam, M. (2019) Investigation of suitable graphene reinforcements for copper based PIM feedstock. In: UNSPECIFIED.

Ng, T.Y.S. and Chew, T.L. and Yeong, Y.F. (2019) Synthesis of small pore zeolite via ultrasonic-assisted hydrothermal synthesis. In: UNSPECIFIED.

Nordin, M.J. and Aziz, N. and Xin, O.W. (2019) Food Image Recognition for Price Calculation using Convolutional Neural Network. In: UNSPECIFIED.

O

Omar, M.Y.B. and Rambli, D.R.A. and Sulaiman, S. and Shiratuddin, M.F. and Merienne, F. and Vanhalle, D. (2019) Proposed conceptual design model of persuasive game for upper limb for stroke rehabilitation. In: UNSPECIFIED.

Owyed, S. and Abdel-Aty, A. and Mabrok, M. and Zakaria, N. (2019) Mathematical modeling and simulation of 3-qubits quantum annealing processor. In: UNSPECIFIED.

Ong, C.C. and Mohamed Saheed, M.S. and Mohamed, N.M. and Mohamed Saheed, M.S. (2019) Highly hydrophobic 3D graphene-carbon nanotubes composite film for oil absorption. In: UNSPECIFIED.

Ofei, T.N. and Jalaludin, A.N. and Habte, A.D. and Lemma, T.A. and Ben-Awuah, J. (2019) Investigation of Plastering Effect in Casing-while-Drilling - A CFD Study. In: UNSPECIFIED.

P

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Al-Yacouby, A.M. and Abdurrasheed, A.S. and Whyte, A. (2019) Downtime Cost Analysis of Offloading Operations Considering Vessel Motions and Mooring Responses in Malaysian Waters. In: UNSPECIFIED.

Prajapati, S. and Liu, C. and Ghosh, D. (2019) Rock Physics Templates and Anisotropy. In: UNSPECIFIED.

Permanasari, A.A. and Kuncara, B.S. and Puspitasari, P. and Sukarni, S. and Ginta, T.L. and Irdianto, W. (2019) Convective heat transfer characteristics of TiO2-EG nanofluid as coolant fluid in heat exchanger. In: UNSPECIFIED.

Permanasari, A.A. and Puspitasari, P. and Sukarni, S. and Irdianto, W. and Ginta, T.L. and Gilang, D. (2019) Thermophysical properties and heat transfer performance of TiO2-Distilled water nanofluid using shell and tube heat exchanger. In: UNSPECIFIED.

Paputungan, I.V. and Setiaji, H. (2019) Engineering kids health monitoring system in Indonesia. In: UNSPECIFIED.

Patil, N.A. and Safwan, A. and Pedapati, S.R. (2019) Effect of deposition methods on microstructure and mechanical properties of Al 7075 alloy-rice husk ash surface composites using friction stir processing. In: UNSPECIFIED.

Prajapati, S. and Ghosh, D. (2019) Enhancing velocity model for gas cloud using first break travel time tomography full waveform inversion. In: UNSPECIFIED.

Purnomo, E.W. and Biswas, A. and Ghosh, D.P. and Sum, C.W. (2019) Under gas clouds effects shallow marine gas reservoir delineation. In: UNSPECIFIED.

Prajapati, S. and Ghosh, D. (2019) An equivalent media theory for reservoir characterization. In: UNSPECIFIED.

Perumal, V. and Mohamed, N.M. and Saheed, M.S.M. and Saheed, M.S.M. (2019) Novel hydrothermal growth of ZnO/NiO hybrids nanostructures on 3D graphene. In: UNSPECIFIED.

Q

Qayyum, A. and Ahamed Khan, M.K.A. and Mazher, M. and Suresh, M. and Jamal, D.N. and Duc Chung, J.T. (2019) Convolutional Neural Network Approach for Estimating Physiological States Involving Face Analytics. In: UNSPECIFIED.

Qayyum, A. and Meriaudeau, F. and Chan, G.C.Y. (2019) Classification of atrial fibrillation with pretrained convolutional neural network models. In: UNSPECIFIED.

Qayyum, A. and Faye, I. and Malik, A.S. and Mazher, M. (2019) Assessment of cognitive load using multimedia learning and resting states with deep learning perspective. In: UNSPECIFIED.

Qi Ngui, J. and Prasad Ghosh, D. and Bin Wan Yusoff, W.I. (2019) Seismic Geomorphological Analysis of Late Miocene Sequences, Offshore Sabah Basin. In: UNSPECIFIED.

R

Reddy Prasad, D.M. and Pendyala, R. and Senthilkumar, R. and Azri, M.H.B. (2019) Microbial production of poly (3-hydroxybutyrate) (PHB) from rubber seed oil using Cupriavidus necator H16. In: UNSPECIFIED.

Rosli, N.S. and Ain Burhani, N.R. and Ibrahim, R. (2019) Predictive Maintenance of Air Booster Compressor (ABC) Motor Failure using Artificial Neural Network trained by Particle Swarm Optimization. In: UNSPECIFIED.

Rahim, A.H.A. and Khoo, K.S. and Yunus, N.M. and Hamzah, W.S.W. (2019) Ether-functionalized ionic liquids as solvent for Gigantochloa scortechini dissolution. In: UNSPECIFIED.

Raza, A. and Capretz, L.F. and Basri, S.B. (2019) An Empirical Study of User Support Tools in Open Source Software. In: UNSPECIFIED.

Rosli, N.S.B. and Ibrahim, R.B. and Ismail, I. (2019) Optimized neural network of predictive maintenance for air booster compressor (ABC) motor failure. In: UNSPECIFIED.

Roslan, N.S. and Izhar, L.I. and Feng, Y.X. and Faye, I. and Ho, E.T.W. and Rahman, M.A. (2019) An investigation of physiological correlates of neuroticism during speaking task: A preliminary study. In: UNSPECIFIED.

Rao, T.V.V.L. and Abdul Rani, A.M. and Manivasagam, G. (2019) Squeeze film analysis of three-layered parallel plate and partial journal bearing lubricated with couple stress fluids for skeletal joint applications. In: UNSPECIFIED.

Ratnam, T.C. and Ghosh, D.P. and Negash, B.M. and Hermana, M. and Ishikura, K. (2019) Facies modeling and property distribution with based on new seismic attributes. In: UNSPECIFIED.

S

Sharifuddin, F.H. and Mulubrhan, F. and Asmelash, M. and Azhar, A. and Alemu, T. (2019) Process simulation modelling and improvement on energy consumptions efficiency. In: UNSPECIFIED.

Subhani, N. and Kannan, R. and Porkumaran, K. and Prasath, S. and Srinath, M. (2019) An Improved Modified Capacitor-Assisted Z-Source Inverter with Reduced Capacitor Voltage Stress and Inrush Start-up Current. In: UNSPECIFIED.

Singh, N. and Elamvazuthi, I. and Nallagownden, P. and Ramasamy, G. and Jangra, A. (2019) Communication Latency in Multi-agent System for Microgrid. In: UNSPECIFIED.

Subramani, I.G. and Bin Ahmad Fauzi, I.A. and Perumal, V. (2019) Expeditious Fabrication Characterization of Metal Interdigitated Transducer on Polyimide film for Biosensing Application. In: UNSPECIFIED.

Sharon, H. and Elamvazuthi, I. and Lu, C.K. and Parasuraman, S. and Natarajan, E. (2019) Classification of Rheumatoid Arthritis using Machine Learning Algorithms. In: UNSPECIFIED.

Salehian, S. and Sebastian, P. and Sayuti, A.B. (2019) Framework for Pedestrian Detection, Tracking and Re-identification in Video Surveillance System. In: UNSPECIFIED.

Sapini, M.L. and Aris, M.N.M. and Robangi, A.A. and Zulkanain, N.N. and Yusof, N.M. (2019) The existence of chaos in stock market price: An investigation using BDS test and close returns test. In: UNSPECIFIED.

Syarafuddin Salam, S. and Mizamzul Mehat, N. and Kamaruddin, S. (2019) Optimization of Laminated Composites Characteristics via integration of Chamis Equation, Taguchi method and Principal Component Analysis. In: UNSPECIFIED.

Shafiqah, M.-N.N. and Nguyen, T.D. and Jun, L.N. and Bahari, M.B. and Phuong, P.T.T. and Abdullah, B. and Vo, D.-V.N. (2019) Production of syngas from ethanol CO2 reforming on La-doped Cu/Al2O3: Impact of promoter loading. In: UNSPECIFIED.

Saafie, N. and Samsudin, M.F.R. and Sufian, S. and Ramli, R.M. (2019) Enhancement of the activated carbon over methylene blue removal efficiency via alkali-acid treatment. In: UNSPECIFIED.

Suparmaniam, U. and Lam, M.K. and Uemura, Y. and Shuit, S.H. (2019) Development of Bioflocculant from Chicken's Eggshell Membrane to Harvest Chlorella vulgaris. In: UNSPECIFIED.

Soaid, N.I. and Mohamed Saheed, M.S. and Mohamed Saheed, M.S. and Mohamed, N.M. (2019) Effect of laser power on the formation of porous graphitic carbon on polyimide film. In: UNSPECIFIED.

Suresh, K. and Jeoti, V. and Drieberg, M. and Iqbal, A. (2019) On Self Driving Cars: An LED Time of Flight (ToF) based Detection and Ranging using various Unipolar Optical CDMA Codes. In: UNSPECIFIED.

Shahzadi, I. and Meriadeau, F. and Tang, T.B. and Quyyum, A. (2019) CNN-LSTM: Cascaded framework for brain tumour classification. In: UNSPECIFIED.

Shahhiran, A.F. and Ramli, R.M. and Zawawi, A. and Zaid, H.F.M. and Harun, N.Y. (2019) Modification of TiO2/AC catalyst for visible light degradation of ionic liquid contaminated wastewater: Effect of Cu loading on the characterization and efficiency. In: UNSPECIFIED.

Sultan, T. and Zabiri, H. and Ali Ammar Taqvi, S. and Shahbaz, M. (2019) Plant-wide MPC control scheme for CO2absorption/stripping system. In: UNSPECIFIED.

Suhaimi, N.H. and Yeong, Y.F. and Jusoh, N. and Asri, M.F.M. (2019) Amine-Functionalized Metal Organic Framework (MOF)/6FDA-Durene Composite Membranes for CO2 Removal from CH4. In: UNSPECIFIED.

Salwa Mohd Nazir, L. and Fong Yeong, Y. and Leng Chew, T. (2019) Effect of Alkalinity Towards the Formation of NaX Zeolite Membranes. In: UNSPECIFIED.

Shamsuddin, A.A.S. and Shahar, S. and Ghosh, D.P. (2019) Detecting sills as kinematic indicators based on spectral decomposition - Inferring stress regime in the Malay Basin (Fractured basement reservoir). In: UNSPECIFIED.

Shah, S. and As Syukri, H. and Wolf, K.-H. and Pilus, R.M. and Rossen, W.R. (2019) Foam generation in flow across a sharp permeability transition: Effect of velocity and fractional flow. In: UNSPECIFIED.

Sharifigaliuk, H. and Mahmood, S.M. and Padmanabhan, E. (2019) Evaluation of the wettability variation of shales by drop shape analysis approach. In: UNSPECIFIED.

Sajid, M. and Ayoub, M. and Uemura, Y. and Yusup, S. and Saleem, M. and Abdullah, B. and Khan, A.U. (2019) Comparative study of glycerol conversion to polyglycerol via conventional and microwave irradiation reactor. In: UNSPECIFIED.

Shukur, M.F. and Hamsan, M.H. and Kadir, M.F.Z. (2019) Investigation of plasticized ionic conductor based on chitosan and ammonium bromide for EDLC application. In: UNSPECIFIED.

Shariff, A.M. and Md Jalil, A.A.-M. and Rostani, K. and Othman, N.A. and Faudzi Mat Isa, M. and Partoon, B. and Lau, K.K. (2019) High CO2-natural gas depressurization via CO2 flow loop facility: Design & engineering implementation. In: UNSPECIFIED.

Shah, S. and As Syukri, H. and Wolf, K. and Pilus, R. and Rossen, W. (2019) Foam generation by snap-off in flow across a sharp permeability transition. In: UNSPECIFIED.

Shukla, S. and Hassan, M.F. and Jung, L.T. and Awang, A. and Khan, M.K. (2019) A 3-tier architecture for network latency reduction in healthcare internet-of-things using fog computing and machine learning. In: UNSPECIFIED.

Shabib-Asl, A. and Abdalla Ayoub, M. and Abdalla Elraies, K. (2019) Combined low salinity water injection and foam flooding in sandstone reservoir rock: A new hybrid EOR. In: UNSPECIFIED.

Saw, B.B. and Poppelreiter, M. and Gamez Vintaned, J.A. and Lunt, P. (2019) Quantitative characterisation of the early Miocene (Cycle-2) Subis limestone in Debbestone Quarry, Niah, Sarawak. In: UNSPECIFIED.

T

Thangarasu, G. and Dominic, P.D.D. and Subramanian, K. and Bin Othman, M. and Sokkalingam, R. (2019) An Efficient Energy Consumption Technique in Integrated WSN-IoT Environment Operations. In: UNSPECIFIED.

Tai, M.J.Y. and Vasudevan, M. and Perumal, V. and Liu, W.W. and Mohamed, N.M. (2019) Synthesis of Laser Scribed Graphene Electrode with Optimized Power for Biosensing. In: UNSPECIFIED.

Thulasiraman, S. and Yunus, N.M.M. and Kumar, P. and Burhanudin, Z.A. and Wilfred, C.D. and Ariffin, A. and Hamdan, M.F. and Hamid, N.H. (2019) Characteristics of Asphaltenes Thin Film Extracted from Crude-Oil-Tank-Bottom-Sludge (COTBS). In: UNSPECIFIED.

Templeton, J.D. and Ghoreishi-Madiseh, S.A. and Hassani, F.P. and Sasmito, A.P. and Kurnia, J.C. (2019) Study of transient conjugate heat transfer in helical closed-loop geothermal heat exchangers for application of thermal energy storage in backfilled mine stopes. In: UNSPECIFIED.

Tayeh, B.A. and Alaloul, W.S. and Alnairab, A.F. (2019) Challenges facing municipalities to provide wastewater services: A case study of Gaza strip. In: UNSPECIFIED.

Tayeh, B.A. and Alaloul, W.S. and Al-Ghazalli, N.K. (2019) Tender pricing of infrastructure projects: Affecting factors. In: UNSPECIFIED.

Tiong, M. and Gholami, R. and Rahman, M.E. and Irawan, S. (2019) An approach to enhance the durability and mechanical properties of Class G cement using nano materials. In: UNSPECIFIED.

U

Umair, M. and Hashmani, M.A. and Hasan, M.H.B. (2019) Survey of Sea Wave Parameters Classification and Prediction using Machine Learning Models. In: UNSPECIFIED.

Ungku Farid, U.F. and Hajian, A. and Zaki, S. and Ahmad Fuad, M.I. and Butumalai, H.R. and Amin, Y.K. and Ahmad Munif, H.A. (2019) Machine learning based litho-fluid facies identification in siliciclastic depositional environments. In: UNSPECIFIED.

Ul Hassan Shah, M. and Moniruzzaman, M. and Mahabubur Rahman Talukder, M. and Bt Yusup, S. (2019) Antimicrobial Activity and Acute Toxicity of Choline Based Ionic Liquid Mixtures. In: UNSPECIFIED.

Umar, A.A. and Saaid, I.M. and Sulaimon, A.A. and Pilus, R.M. and Amer, N.A. and Halilu, A. and Negash, B.M. (2019) Characterization of native colloids and study of emulsions stabilized by asphaltene, wax, silicates and calcites using optical analyzer turbiscan. In: UNSPECIFIED.

V

Vasudevan, M. and Murthe, S.S. and Yong, M.T.J. and Perumal, V. and Mohamed, N.M. and Gopinath, S.C.B. (2019) Facile Synthesis of Cellulose Acetate Nanofiber for Biosensing Application. In: UNSPECIFIED.

Vijayan, D. and Farhan, A. and Rao, H. (2019) A quick automatic 3D zero-offset VSP simulation and processing workflow for complex salt structures. In: UNSPECIFIED.

W

Wahida Khalili, N.N. and Othman, M. and Abu Bakar, M.N. and Sakidin, H. and Abdullah, M.L. (2019) Mathematical Modelling and Simulation of the Performance of PV/T Air Solar Collector. In: UNSPECIFIED.

Wong, L.P. and Isa, M.H. and Bashir, M.J.K. and Guo, X.X. (2019) Optimization of ultrasound irradiation for palm oil mill effluent. In: UNSPECIFIED.

Woon, W.C. and Yahya, N. and Badruddin, N. (2019) EEG Eye State Identification based on Statistical Feature and Common Spatial Pattern Filter. In: UNSPECIFIED.

Wong, C.-Y. and Lim, J.-W. and Lam, M.-K. and Uemura, Y. and Chong, F.-K. and Chew, T.-L. and Mohamad, M. and Hasan, H.A. (2019) Impact of limited feed medium and different lipid extraction solvents in dealing with black soldier fly larvae. In: UNSPECIFIED.

Wong, L.P. and Isa, M.H. and Bashir, M.J.K. and Chin, Y.H. (2019) Effect of hydraulic retention time on volatile fatty acid production and organic degradation in anaerobic digestion of palm oil mill effluent. In: UNSPECIFIED.

Wongso, V. and Sambudi, N.S. and Sufian, S. and Isnaeni and Abdullah, B. (2019) The effect of pH in the synthesis of carbon quantum dots from rice husk on their photoluminescence properties. In: UNSPECIFIED.

Wong, W.-L. and Lim, W.-H. and Si, J. and Lam, M.-K. and Ho, Y.-C. (2019) Production of biodiesel from Annona muricata seeds. In: UNSPECIFIED.

X

Xin, S.Q. and Yahya, N. and Izhar, L.I. (2019) Classification of Neurological States from Biosensor Signals Based on Statistical Features. In: UNSPECIFIED.

Y

Yew, K.-H. and Foong, O.-M. and Sivarajan, T.P. (2019) Knowledge-Based Improvement of Machine Downtime Management for IR4.0. In: UNSPECIFIED.

Yahya Al-Ashmori, Y. and Bin Othman, I. and Bin Mohamad, H. and Rahmawati, Y. and Napiah, M. (2019) Establishing the Level of BIM implementation - A Case Study in Melaka, Malaysia. In: UNSPECIFIED.

Yee Min, H. and Aini Amran, N. and Samsuri, S. (2019) Winterization of biodiesel through progressive freezing for cold flow properties improvement. In: UNSPECIFIED.

Yan, L.Z. and Fahmi Bin Hawari, H. and Witjaksono Bin Djaswadi, G. (2019) Room temperature interdigitated electrode acetone sensor based on SnO2-rGO hybrid composite. In: UNSPECIFIED.

Yan, L.Z. and Fahmi Hawari, H. and Djaswadi, G.W. (2019) Highly Sensitive SnO2-Reduced Graphene Oxide Hybrid Composites for Room Temperature Acetone Sensor. In: UNSPECIFIED.

Yub Harun, N. and Jin Han, T. and Vijayakumar, T. and Saeed, A. and Afzal, M.T. (2019) Ash Deposition Characteristics of Industrial Biomass Waste and Agricultural Residues. In: UNSPECIFIED.

Yee, L.S. and Redzuan, I.F.B.M. (2019) Mathematical description of normal convective and vacuum drying process of rapeseeds. In: UNSPECIFIED.

Yal Khattab, N.F.N. (2019) Sedimentology of semanggol formation at Pokok Sena, Kedah. In: UNSPECIFIED.

Yeong, Y.C. and Hacks, S. and Lichter, H. (2019) Prioritization of EA debts facilitating portfolio theory. In: UNSPECIFIED.

Yasir, M. and Amir, N. and Ahmad, F. and Ullah, S. and Jimenez, M. (2019) Synergistic effect of basalt fiber on the thermal properties of intumescent fire retardant coating. In: UNSPECIFIED.

Z

Zulkifli, N.A. and Karim, S.A.A. and Shafie, A. and Sarfraz, M. (2019) Rational bicubic Ball for image interpolation. In: UNSPECIFIED.

Zahoor, F. and Zulkifli, T.Z.A. and Khanday, F.A. and Fida, A.A. (2019) Low-power RRAM Device based 1T1R Array Design with CNTFET as Access Device. In: UNSPECIFIED.

Zainuddin, Z. and P Akhir, E.A. and Aziz, N. (2019) Predictive analytics for machine failure using optimized recurrent neural network-gated recurrent unit (GRU). In: UNSPECIFIED.

Zin, R.M. and Sabil, K.M. and Mutalib, M.I.A. and Coquelet, C. (2019) Modelling of solubility of mercaptans in water at low concentrations. In: UNSPECIFIED.

Zubair Yahaya, A. and Rao Somalu, M. and Muchtar, A. and Anwar Sulaiman, S. and Wan Daud, W.R. (2019) Characterization of tar formation during high temperature gasification of different chemical compositions in biomass. In: UNSPECIFIED.

Zobilah, A.M. and Shairi, N.A. and Zakaria, Z. and Othman, A. and Wong, P.W. (2019) Design and Analysis of Absorptive Filter Integrated SPDT Switch using Coupled Line L-shape and Transmission Line Stub Resonators. In: UNSPECIFIED.

Zubair, N.A. and Abouzari-Lotf, E. and Mahmoud Nasef, M. and Abdullah, E.C. (2019) Aerogel-based materials for adsorbent applications in material domains. In: UNSPECIFIED.

Zakaullah and Witjaksono, G. and Khattak, M.I. and Israr, H. (2019) Design and Analysis of Graphene Nano-Bowtie circular array Antenna for Energy Harvesting Applications. In: UNSPECIFIED.

Zakaria, N.S. and Merican, Z.M.A. and Hamza, M.F. (2019) Performance and critical issues of polymer liners in pipeline industry: A review. In: UNSPECIFIED.

Zia-Ul-Mustafa, M. and Mukhtar, H. and Nordin, N.A.H.M. and Mannan, H.A. (2019) Effect of imidazolium based ionic liquids on PES membrane for CO2/CH4 separation. In: UNSPECIFIED.