A

Aimen Isa, M. and Chew, T.L. and Yeong, Y.F. (2018) Zeolite NaY Synthesis by using Sodium Silicate and Colloidal Silica as Silica Source. In: UNSPECIFIED.

Ahmad, N. and Vijaya Bhaskar Reddy, A. and Saha, B.B. and Nasruddin and Moniruzzaman, M. (2018) Synthesis and characterization of ionic liquid polymer composite with zeolite and its application for carbon dioxide capture. In: UNSPECIFIED.

Abdullah, M.Z. and Mohamed Rashidi, N.A. (2018) Mixing analysis of nitrogen and hydrogen gases for ammonia synthesis via magnetic induction in monolithic channel. In: UNSPECIFIED.

Athar, M. and Zaidi, N.A.B. and Shariff, A.M. and Buang, A. and Khan, M.I. (2018) Chemical reactor inherent safety index at preliminary design stage. In: UNSPECIFIED.

Anjum, H. and Gnanasundaram, N. and Johari, K. and Murugesan, T. (2018) Decontamination of benzene from aqueous solution by green functionalization of activated carbon. In: UNSPECIFIED.

Ahmadon, A. and Nazir, L.S.M. and Yeong, Y.F. and Sabdin, S. (2018) Formation of pure NaX zeolite: Effect of ageing and hydrothermal synthesis parameters. In: UNSPECIFIED.

Aris, M.N.M. and Daud, H. and Dass, S.C. (2018) Prediction of hydrocarbon depth for seabed logging (SBL) application using Gaussian process. In: UNSPECIFIED.

Ayoub, M. and Mahmood, S.M. and Ahmad, W. and Ullah, S. and Ahmad, M. and Zafar, M. and Farrukh, S. and Nasr, N.H. (2018) Carbon Dioxide CO 2 Capture Using Amino Acid Salt Solution. In: UNSPECIFIED.

Ali, H. and Soleimani, H. and Yahya, N. and Baig, M.K. and Rostami, A. (2018) Finite element method for modelling of two phase fluid flow in porous media. In: UNSPECIFIED.

Ariffin, M.N. and Shafie, A. (2018) Investigation of failure times parameter through standard and mixture Weibull distribution. In: UNSPECIFIED.

Abdalsalam Mohamed, E. and Zuki Yusoff, M. and Khalil Adam, I. and Ali Hamid, E. and Al-Shargie, F. and Muzammel, M. (2018) Enhancing EEG Signals in Brain Computer Interface Using Intrinsic Time-Scale Decomposition. In: UNSPECIFIED.

Ab Rahim, A.H. and Man, Z. and Sarwono, A. and Wan Hamzah, W.S. and Yunus, N.M. and Wilfred, C.D. (2018) Extraction and Comparative Analysis of Lignin Extract from Alkali and Ionic Liquid Pretreatment. In: UNSPECIFIED.

Alva, S. and Sundari, R. and A Aziz, A.S. and A Rashid, N.A. and Gunawan, W. (2018) Development of Ammonium-Selective Electrode Based on PVC/MB28 Membrane. In: UNSPECIFIED.

Adebayo, J.O. and Napiah, M. and Ibrahim, K. and Raduan Kabit, M. (2018) Evaluation of Waste Cooking Oil as Sustainable Binder for Building Blocks. In: UNSPECIFIED.

Alsaih, K. and Tang, T. and Meriaudeau, F. and Lemaitre, G. and Rastgoo, M. and Sidibe, D. (2018) Classification of Retinal Cysts on SD-OCT Images Using Stacked Auto-Encoder. In: UNSPECIFIED.

Abdul Aziz, A.F. and Binti Anuar, N.A. and Zainol, M.Z. and Romlie, M.F. (2018) Effect of Ferromagnetic Material in Circular Magnetic Structure for Electric Vehicle Wireless Power Transfer. In: UNSPECIFIED.

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Malik, A.F. (2018) FEM Simulation Analysis of AlN/SiO 2 /Si Multilayer Structure and Effect of IDT Configuration on SAW Propagation Modes and Characteristics. In: UNSPECIFIED.

Adil, S.H. and Ebrahim, M. and Raza, K. and Azhar Ali, S.S. (2018) Prediction of Eye State Using KNN Algorithm. In: UNSPECIFIED.

Abbasi, T. and Lim, K.H. and Rosli, N.S. and Ismail, I. and Ibrahim, R. (2018) Development of Predictive Maintenance Interface Using Multiple Linear Regression. In: UNSPECIFIED.

Ahmed, A.Y. and Baskaran, F.M.F. and Rabih, A.S.A. and Dennis, J.O. and Md Khir, M.H. and Elmaleeh, M.A.A. (2018) Design, Modeling and Simulation of Microhotplate for Application in Gas Detection. In: UNSPECIFIED.

Albarody, T.M.B. and Al-Jothery, H.K.M. and Hussein, A.R. and Teng, L.Z. and Muhsan, A.S. and Ahmad, F. (2018) Ultrafast-contactless plasma arc sintering. In: UNSPECIFIED.

Abbas, S.S. and Nasif, M.S. and Said, M.A.M. and Al-Waked, R. (2018) Numerical simulation of the non-Newtonian blood flow through aortic Bileaflet mechanical heart valve using fluid-structure interaction approach. In: UNSPECIFIED.

Abdulmalek, S.H. and Al-Kayiem, H.H. and Assadi, M.K. and Gitan, A.A. (2018) Development of multi chamber technique to improve the uniformity in drying application. In: UNSPECIFIED.

Abdullah, M.Z. and Jemsee, J.S. and Mahmud, M.S. and Ya, H. (2018) Effects of fluoropolymer and calcium stearate on melt flow index and mechanical properties of high-density polyethylene. In: UNSPECIFIED.

Ahmad, A. and Dzubir, F.A. and Ya, H.H. and Sudin, M.A. and Ismail, R. and Faizal, M. (2018) Deslgn and development of casted staln less steel Y-Tee jolnt for oll and gas appllcatlon. In: UNSPECIFIED.

Al Sambathan, S. and Ismail, F.B. and Nasif, M.S. (2018) Underfloor air distribution technology: A review. In: UNSPECIFIED.

Abas, A.Z. and Ismail, M.C. and Eng, K.K. (2018) The effect of CO2-H2S on corrosion of low alloy steel 3Cr in high partial pressure CO2 environments. In: UNSPECIFIED.

Al-Kayiem, H.H. and Wahhab, H.A.A. and Magaril, E. and Aziz, A.R.A. (2018) Performance and emissions investigation of a single cylinder diesel engine using enhanced blend biodiesel by nanoparticles. In: UNSPECIFIED.

Adzis, A.H.A. and Abdul-Rani, A.M. and Yi, K.Y. and Maulianda, B.T. and Rao, T.V.V.L.N. (2018) Effect of back rake angle and shape on wear rate of PDC cutter in hard formation. In: UNSPECIFIED.

Abdul-Rani, A.M. and Aliyu, A.A.A. and Hastuty, S. and Ginta, T.L. and Rao, T.V.V.L.N. and Ali, S. (2018) Enhancing surface quality of Zr-Cu-Ni-Ti-Be through hydroxyapatite mixed EDM for potential orthopedic application. In: UNSPECIFIED.

Afiqah, K.A.S.N. and Mizamzul, M.N. and Shahrul, K. (2018) Micromechanics analysis of rhombus model via finite elements integrated with Taguchi method and principle component analysis. In: UNSPECIFIED.

Abrishami, S.J. and Zeraatkar, M. and Esrafilian, R. and Vafaei, S.A. and Zahraee, S.M. (2018) Application of Computer Simulation for Productivity Improvement of Welding Unit in a Heater Manufacturing Industry: A Case Study Based on Arena. In: UNSPECIFIED.

Azwan, E. and Kannan, R. and Lee, L. and Krishnamurthy, S. (2018) Study the Effects of Photon Radiation on Power MOSFET for Harsh Environment Application. In: UNSPECIFIED.

Aurybi, M.A. and Al-Kayiem, H.H. and Gilani, S.I.U. and Ismaeel, A.A. (2018) CFD Analysis of Hybrid Solar Chimney Power Plant. In: UNSPECIFIED.

Azizan, I. and Karim, S.A.B.A. and Suresh Kumar Raju, S. (2018) Fitting Rainfall Data by Using Cubic Spline Interpolation. In: UNSPECIFIED.

Amir, N. and Hisham, M.S.M. and Abidin, K.A.Z. (2018) Study of Physical Properties and Shock Absorption Abilities of Starch Polymer Foam as Cushioning Material for Packaging. In: UNSPECIFIED.

Abdullah, M.A. and Albarody, T.M.B. and Yusoff, P.S.M.B.M. and Hussein, A.R. (2018) Carbon-13 Characterization and Modelling for Temperature Measurement-Based Proton Frequency. In: UNSPECIFIED.

Abdulmalek, S.H. and Al-Kayiem, H.H. and Baheta, A.T. and Gitan, A.A. (2018) Design of Flue Gas-Air Heat Exchanger for Regeneration of Desiccant System. In: UNSPECIFIED.

Ahmed, M.G. and Dennis, J.O. and Khir, M.H.M. and Rabih, A.A.S. (2018) Characterization of Micro-heater and Temperature Sensor in Micro-electromechanical System Device for Gas Detection. In: UNSPECIFIED.

Almusaylim, Z.A. and Zaman, N. and Jung, L.T. (2018) Proposing A Data Privacy Aware Protocol for Roadside Accident Video Reporting Service Using 5G In Vehicular Cloud Networks Environment. In: UNSPECIFIED.

Abubakar, M.Y. and Tang Jung, L. (2018) Synthesis of Reversible Logic Using Enhanced Genetic Programming Approach. In: UNSPECIFIED.

Abbas, M.K. and Tong, B. and Abdulla, R. (2018) A Hybrid Alert System for Deaf People using Context-Aware Computing and Image Processing. In: UNSPECIFIED.

Akhir, E.A.P. and Bachok, R. and Arshad, N.I. and Aiman Zamri, A. (2018) Conceptual Framework for SIDS Alert System. In: UNSPECIFIED.

Alazzawi, A.K. and Md Rais, H. and Basri, S. (2018) Artificial Bee Colony Algorithm for t-Way Test Suite Generation. In: UNSPECIFIED.

Amirthalingam, T. and Rais, H.M. (2018) Automated Table Partitioner (ATAP) in Apache Hive. In: UNSPECIFIED.

Aslam, M. and Ab Rahim, L.B. and Hashmani, M. and Watada, J. (2018) Domain Specific Modelling Language of PIM for OSSS on Infrastructure Cloud Service Model. In: UNSPECIFIED.

Al-Tashi, Q. and Rais, H. and Abdulkadir, S.J. (2018) Hybrid Swarm Intelligence Algorithms with Ensemble Machine Learning for Medical Diagnosis. In: UNSPECIFIED.

Al-Arabiat, D.A. and Ahmad, W.F.W. and Sarlan, A. (2018) Mobile Learning and Software as a Service: The Effect on Knowledge Sharing. In: UNSPECIFIED.

Adil, S.H. and Ebrahim, M. and Raza, K. and Azhar Ali, S.S. and Ahmed Hashmani, M. (2018) Liver Patient Classification using Logistic Regression. In: UNSPECIFIED.

Ahmed Ismail, A.O. and Mahmood, A.K. (2018) The Influence of Interaction on Students Academic Performance: Case of Saudi Public University. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. and Mohammed, B.S. (2018) Industry Revolution IR 4.0: Future Opportunities and Challenges in Construction Industry. In: UNSPECIFIED.

Akram, A. and Mustaffa, Z. and Albarody, T. (2018) Numerical Simulation and Experimental Test on the Burst Pressure of ASME A106 Steel Pipe. In: UNSPECIFIED.

Abdullah, M.S. and Alaloul, W.S. and Liew, M.S. and Mohammed, B.S. (2018) Delays and Cost Overruns Causes during Construction of Palm Oil Refinery Projects. In: UNSPECIFIED.

Abdurrasheed, A.S. and Yusof, K.W. and Takaijudin, H.B. and Ghani, A.A. and Muhammad, M.M. and Sholagberu, A.T. (2018) Advances and Challenging Issues in Subsurface Drainage Module Technology and BIOECODS: A Review. In: UNSPECIFIED.

Ahmad, R. and Sarlan, A. and Hashim, A.S. and Hassan, M.F. (2018) Relationship between Hands-on and Written Coursework Assessments with Critical Thinking Skills in Structured Programming Course. In: UNSPECIFIED.

Ahmad, W.F.W. and Sarlan, A. and Rokhmah, S. and Ahmad, R. (2018) Integrating Design Thinking Approach to Increase Student's Motivation. In: UNSPECIFIED.

Afsharian, A. and Sivapalan, S. and Md Nordin, S.B. (2018) Blended Learning the Higher Education Classroom: A Critical Review of Developments Within Engineering Education. In: UNSPECIFIED.

Albarody, T.M.B. and Mohsen, A.S. and Hussein, A.R. and Melor, P.S. and Yusoff, B.M. (2018) Sustaining a synergistic industrial advisory board and academic collaboration. In: UNSPECIFIED.

Azizan, M.T. and Ramli, R.M. and Rabat, N.E. and Mellon, N. (2018) The Impact of Student Centred Learning Towards Reinforcement of positive Values among Chemical Engineering Students. In: UNSPECIFIED.

Abdullah, B. and Bin Azizan, M.T. (2018) A Flipped Classroom Technique in Improving Students' Grade of Transport Phenomena Course. In: UNSPECIFIED.

Afsharian, A. and Sivapalan, S. and Md Nordin, S.B. (2018) Blended Learning the Higher Education Classroom: A Critical Review of Developments Within Engineering Education. In: UNSPECIFIED.

Anwar, R. and Rehman, M. and Wang, K.S. and Salleh, R. (2018) Job Performance Through Knowledge Sharing Behavior in Global Software Development Organizations. In: UNSPECIFIED.

Awan, A. and Saleem, M. and Basit, A. (2018) Simulation of Proton Exchange Membrane Fuel Cell by using ANSYS Fluent. In: UNSPECIFIED.

Axinte, E. and Wang, Y. and Abdul-Rani, A.M. and Aliyu, A.A.A. and Andronic, O. and Stegaru, C. and Bofu, A. (2018) An environmental friendly model for materials substitution in a fiberglass reinforced polyester composite. In: UNSPECIFIED.

Abdulelah, H. and Mahmood, S. and Hamada, G. (2018) Hydraulic flow units for reservoir characterization: A successful application on arab-d carbonate. In: UNSPECIFIED.

Azli, N. and Shukri, S.R.M. (2018) Sketching profiles: For logical structure in children's drawing. In: UNSPECIFIED.

Amin, A. and Rehman, M. and Akbar, R. and Basri, S. and Hassan, M.F. (2018) Trait-based personality profile of software programmers: A study on Pakistan's software industry. In: UNSPECIFIED.

Amirudin, N.A.B. and Saad, N. and Ali, S.S.A. and Adil, S.H. (2018) Detection and Analysis of Driver Drowsiness. In: UNSPECIFIED.

Ahmad, J. and Mahamad, S. and Mohd Fadzil, N.S. (2018) Integrated mosquitoes repellent with ultrasound and frequency. In: UNSPECIFIED.

Akhir, E.A.P. and Aziz, N. and Roslin, A.F. (2018) Data Visualization for Evaluation Form Management System. In: UNSPECIFIED.

Amirthalingam, T. and Rais, H.M. (2018) HALA: Hive advanced lexical analyzer. In: UNSPECIFIED.

Al-Mutarreb, A.M. and Jufar, S.R. and Abdulelah, H. and Padmanabhan, E. and Mostafa, G. and Ahmed, M. (2018) The Influence of shales characteristics on CO2 adsorption behaviour under sub-critical conditions. In: UNSPECIFIED.

Ani, C. and Norzaimi, M. and Kamaruddin and Shahrul and Azid, A. and Ishak (2018) Analysis of the effective production Kanban size with triggering system for achieving just-in-time (JIT) production. In: UNSPECIFIED.

Adham Adnan, M. and Kee, K.-E. and Raja, P.B. and Ismail, M.C. and Kakooei, S. (2018) Influence of Heat Treatment on the Corrosion of Carbon Steel in Environment Containing Carbon Dioxide and Acetic Acid. In: UNSPECIFIED.

Ali, S. and Rani, A.M.A. and Altaf, K. and Baig, Z. (2018) Investigation of Boron addition and compaction pressure on the compactibility, densification and microhardness of 316L Stainless Steel. In: UNSPECIFIED.

Alkali, A.U. and Ginta, T.L. and Abdulrani, A.M. and Elsiti, N.M. (2018) Fundamental investigation on influence of external heat on chip formation during thermal assisted machining. In: UNSPECIFIED.

Ahmad, N.R. and Jamin, N.H. (2018) Preliminary view of geotechnical properties of soft rocks of Semanggol formation at Pokok Sena, Kedah. In: UNSPECIFIED.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2018) Abrasion Resistance of Nano Silica Modified Roller Compacted Rubbercrete: Cantabro Loss Method and Response Surface Methodology Approach. In: UNSPECIFIED.

Al-Fakih, A. and Mohammed, B.S. and Nuruddin, F. and Nikbakht, E. (2018) Development of Interlocking Masonry Bricks and its' Structural Behaviour: A Review Paper. In: UNSPECIFIED.

Al-Bared, M.A.M. and Marto, A. and Harahap, I.S.H. and Kasim, F. (2018) Compaction and Plasticity Comparative Behaviour of Soft Clay Treated with Coarse and Fine Sizes of Ceramic Tiles. In: UNSPECIFIED.

Afzal, T. and Isa, M.H. and Raza Ul Mustafa, M. (2018) Removal of organic pollutants from produced water using Fenton oxidation. In: UNSPECIFIED.

Abdul Wahhab, H.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. and Reda, M.N. (2018) Application of Electromagnetic Induction Technique to Measure the Void Fraction in Oil/Gas Two Phase Flow. In: UNSPECIFIED.

Azam, F.I. and Abdul Rani, A.M. and Altaf, K. and Rao, T.V.V.L.N. and Zaharin, H.A. (2018) An In-Depth Review on Direct Additive Manufacturing of Metals. In: UNSPECIFIED.

Ayob, F. and Hussain, P. and Awang, M. and Zoolfakar, M.R. and Abdullah, A. and Baharudin, B.A. and Abdul Rahim, A.A. (2018) Effect of post heat treatment on the microstructure and microhardness of diffusion coupled gray cast iron and low carbon steel. In: UNSPECIFIED.

Abdulmalek, S.H. and Assadi, M.K. and Al-Kayiem, H.H. and Gitan, A.A. (2018) Effect of Tube Diameter on the Design of Heat Exchanger in Solar Drying system. In: UNSPECIFIED.

Abdul-Rani, A.M. and Sidid, A.A.B.C. and Ab Adzis, A.H. (2018) Study on the Effect of Diamond Grain Size on Wear of Polycrystalline Diamond Compact Cutter. In: UNSPECIFIED.

Anjum, H. and Obaid, M.A. and Shamim, M.Y. and Murugesan, T. (2018) Adsorption of Benzene by "green" functionalization of Montmorillonite. In: UNSPECIFIED.

Abd Halim, F.A. and Mohd Ariffin, M. and Sugathan, S.K. (2018) Towards the Development of Mobile App Design Model for Dyscalculia Children in Malaysia. In: UNSPECIFIED.

Ahmad, M.S. and Mohshim, D.F. and Nasir, R. and Mannan, H.A. and Mukhtar, H. (2018) Effect of solvents on the morphology and performance of Polyethersulfone (PES) polymeric membranes material for CO2/CH4 separation. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Wan Zawawi, N.A. (2018) Communication, coordination and cooperation in construction projects: Business environment and human behaviours. In: UNSPECIFIED.

Ahmad, M. and Padmanabhan, E. and Haghighi, M. and Rajabi, M. (2018) Brine estimation in shale gas reservoirs using wireline logging and laboratory data: A case study from Murteree Shale, Cooper Basin, South Australia. In: UNSPECIFIED.

Arshad, N.I. and Bosua, R. and Milton, S.K. (2018) Understanding technology-use through the lens of technology-in-practice. In: UNSPECIFIED.

Amelia, S. and Latief, Y. and Zawawi, N.A.W.A. and Santos, A.J. (2018) Policy and institution of offshore platform decommissioning in Indonesia oil and gas upstream industry to improve the performance of navigational safety and state-owned asset management. In: UNSPECIFIED.

Arshad, A.R.M. and Ghosh, D.P. and Latiff, A.H.A. (2018) Velocity estimation by joint migration inversion: An example from a field in the Malay Basin. In: UNSPECIFIED.

Abdul Aziz, A.F. and Romlie, M.F. and Azni Zulkifli, T.Z. and Baharudin, Z. (2018) Evaluation of five compensation circuits for electric vehicle inductively coupled power transfer (ICPT). In: UNSPECIFIED.

Ahmed, R.M. and Mohan, C.S. (2018) Gasification of refinery sludge using coal fly ash and refinery sludge ash as catalysts. In: UNSPECIFIED.

Ali, A. and Romlie, M.F. and Nor, N.M. and Ibrahim, T. (2018) Optimization for the planning of distributed renewable generators using genetic algorithm. In: UNSPECIFIED.

Altahir, A.A. and Asirvadam, V.S. and Hamid, N. and Sebastian, P. and Saad, N. and Dass, S.C. (2018) Optimizing camera placement based on task modeling. In: UNSPECIFIED.

Altaf, K. and Majdi, A. and Rani, A. and Ahmad, F. and Ahmad, J. (2018) Enhanced polymer rapid tooling for metal injection moulding process. In: UNSPECIFIED.

B

Bavoh, C.B. and Khan, M.S. and Ting, V.J. and Lal, B. and Ofei, T.N. and Ben-Awuah, J. and Ayoub, M. and Shariff, A.B.M. (2018) The Effect of Acidic Gases and Thermodynamic Inhibitors on the Hydrates Phase Boundary of Synthetic Malaysia Natural Gas. In: UNSPECIFIED.

Biyanto, T.R. and Sehamat, N. and Sordi, N.A. and Zabiri, H. (2018) Optimization of PID controller tuning parameters for multivariable system using Duelist algorithm. In: UNSPECIFIED.

Biyanto, T.R. and Sordi, N.A. and Sehamat, N. and Zabiri, H. (2018) PID multivariable tuning system using BLT method for distillation column. In: UNSPECIFIED.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. and Harindran, V.R. (2018) Design and Analysis of Fractional-order Filters Using Scilab. In: UNSPECIFIED.

Binti Azman, N.N. and Abdul Karim, S.A.B. (2018) Assessing Climate Factors on Dengue Spreading in State of Perak. In: UNSPECIFIED.

Berahim, N.H. and Seman, A.A. and Abd Halim, N.S. and Mohd Zabidi, N.A. (2018) Synthesis and Characterization of Hybrid Catalyst on SBA-15 Support for CO 2 Hydrogenation Reaction. In: UNSPECIFIED.

Bel, T. and Yahya, N. and Cimenoglu, H. and Arslan, C. and Baydogan, N. (2018) The Examination of the Changes in the Magnetic Properties of the Poly(methyl methacrylate). In: UNSPECIFIED.

Borhan, N. and Ramli, A. (2018) Inhibition of Naphthenates Emulsion Soaps Chemical EOR using Synthesis Compound Derived from Fatty Hydrazide. In: UNSPECIFIED.

Bavoh, C.B. and Lal, B. and Khan, M.S. and Osei, H. and Ayuob, M. (2018) Combined Inhibition Effect of 1-Ethyl-3-methy-limidazolium Chloride + Glycine on Methane Hydrate. In: UNSPECIFIED.

Baig, M.K. and Soleimani, H. and Yahya, N. and Ali, H. and Sabet, M. and Rostami, A. (2018) Electronic polarization of zinc nitride nanoparticles for interfacial tension reduction in enhanced oil recovery. In: UNSPECIFIED.

Bade, L.A. and Dennis, J.O. and Md Khir, M.H. and Wen, W.P. (2018) Design of tunable interdigital capacitor. In: UNSPECIFIED.

Babiker, A. and Faye, I. and Malik, A.S. (2018) EMD-Based Feature to Detect Situational Interest in Classroom Settings Using EEG. In: UNSPECIFIED.

Baharudin, F. and Mohamed, R. and Ismail, I. and Bala, A. (2018) Deployment of Six Sigma Methodology in Plant Data Analytics. In: UNSPECIFIED.

Burhani, N.R.A. and Muhammad, M. and Ismail, M.C. (2018) Corrosion under insulation rate prediction model for piping by two stages of artificial neural network. In: UNSPECIFIED.

Bakhoda, S. and Al-Kayiem, H.H. and Assadi, M.K. (2018) The heavy metal free-near infrared "cuInSeS/ZnS" core/shell quantum dot and its application in luminescent solar concentrator. In: UNSPECIFIED.

Baheta, A.T. and Hailegiorgis, S.M. and Oumer, A.N. and Sulaiman, S.A.B. (2018) Performance Analysis of Transcritical Carbon Dioxide Rankine Cycle with Regenerator. In: UNSPECIFIED.

Basha, S.N. and Rao, P.S. (2018) A Simulated Model for Assesing the Line Condition of Onshore Pipelines. In: UNSPECIFIED.

Basrawi, F. and Al-Anati, A.I.M. and Ibrahim, T.K. and Yusof, M.H. and Razak, A.A. and Sulaiman, S.A. and Yamada, T. (2018) Theoretical Analysis on the Micro Gas Turbine Integrated Solar Farm for Power Output Stabilization. In: UNSPECIFIED.

Basrawi, F. and Leon, Y.C. and Ibrahim, T.K. and Yusof, M.H. and Razak, A.A. and Sulaiman, S.A. and Yamada, T. (2018) Experimental Analysis on the Effect of Area of Surface Cooling for a Water-Cooled Photovoltaic. In: UNSPECIFIED.

Babu, B.P. and Indragandhi, V. and Rajasingh, R. and Kannan, R. (2018) Design Approach of Grid Coupled Solar Inverter. In: UNSPECIFIED.

Bakthavatchalam, B. and Habib, K. and Patil, N. and Hussein, O.A. (2018) Microstructural analysis of Al6063/sic with calcium additives for hardness enhancement. In: UNSPECIFIED.

Bhattacharjee, S. and Ab Rahim, L.B. and Zakaria, M.N.B. and Ab Aziz, I.B. (2018) A Hybrid Technique for Enhancing Data Integrity in Big Data Transmission Environment. In: UNSPECIFIED.

Bhattacharjee, S. and Ab Rahim, L.B. and Zakaria, M.N.B. and Ab Aziz, I.B. (2018) A Protocol for Selecting the Strongest and Authentic Hotspot in any Wireless Infrastructure. In: UNSPECIFIED.

Balarabe, I.W. and Hisham, M. and Niraku, A.R. and Harahap, I.S.H. (2018) Preliminary View of a Smart Technique for Materials Testing in the Laboratory using FBG Sensor. In: UNSPECIFIED.

Basri, S. and Sarlan, A. and Aziz, N.A. and Ahmad Zahiri, A.S. (2018) Teaching Software Engineering Course with Cooperative Learning Method: A Pilot Study. In: UNSPECIFIED.

Bhattacharyya, E. (2018) Are we there yet? A Case Study of Industry-University Collaboration on Communicative Competence for Sustainable Employability and Work Readiness. In: UNSPECIFIED.

Babikir, I.A.M. and Salim, A.M.A. and Ghosh, D.P. (2018) Applying seismic sedimentology for litho-geomorphological facies analysis of a coal-dominated deltaic reservoir, Northern Malay Basin. In: UNSPECIFIED.

Babasafari, A.A. and Ghosh, D.P. and Salim, A.M.A. and Ratnam, T. and Sambo, C. and Rezaee, S. (2018) Petro Elastic Modeling for enhancement of hydrocarbon prediction: Case study in SE Asia. In: UNSPECIFIED.

Baig, Z. and Mamat, O. and Mustapha, M. and Ali, S. and Yasir, M. (2018) Low energy solution ball milling of graphene nanoplatelets (GNPs) reinforced aluminium nanocomposites and its mechanical properties. In: UNSPECIFIED.

Binti Amir Boktar, A.S. and Aziz, I.A. and Mohd Jaafar, N.S. (2018) Teenager monitoring mobile application using geofencing. In: UNSPECIFIED.

Bt Nasaruddin, N.S. and Aziz, I.A. and Rashid, N.A. (2018) Web-based electronic healthcare record system (EHRS) based on feedback. In: UNSPECIFIED.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. and Harindran, V.R. (2018) Fractional Order PI Controllers for Real-Time Control of Pressure Plant. In: UNSPECIFIED.

Benlamoudi, A. and Kadir, A.A. and Khodja, M. and Nuruddin, M.F. (2018) Analysis of the cement clinker produced with incorporation of petroleum sludge. In: UNSPECIFIED.

Bala, N. and Napiah, M. and Kamaruddin, I. and Danlami, N. (2018) Optimization of Nanocomposite Modified Asphalt Mixtures Fatigue Life using Response Surface Methodology. In: UNSPECIFIED.

Beheshti, M. and Zabihiazadboni, M. and Ismail, M.C. and Kakooei, S. and Shahrestani, S. (2018) Investigation on Simultaneous Effects of Shot Peen and Austenitizing Time and Temperature on Grain Size and Microstructure of Austenitic Manganese Steel (Hadfield). In: UNSPECIFIED.

Bakhoda, S. and Assadi, M.K. and Ahmadi Kandjani, S. and Al Kayiem, H.H. and Bhat, A.H. (2018) Application of Quantum Dot nanocrystal in Luminescent solar concentrators. In: UNSPECIFIED.

Babasafari, A. and Ghosh, D. and Ratnam, T. and Salim, A. (2018) Finely layered anisotropic media effect on seismic reservoir characterization. In: UNSPECIFIED.

Bt Mohd Shafian, S.R. and Ahmed, S. and Elraies, K.A. and Hashmet, M.R. and Hanamartani, A.S. (2018) Laboratory study of CO2 foam for enhanced oil recovery: Advanced screening, optimization, and evaluation. In: UNSPECIFIED.

Bhullar, L.K. and Putra, Z.A. and Bilad, M.R. and Hadi, N.A. and Hakim, M.D. (2018) Process simulation of bio-ethanol production from empty fruit bunch via acid hydrolysis pretreatment. In: UNSPECIFIED.

Babikir, I.A.M. and Salim, A.M.A. and Ghosh, D.P. (2018) Applying seismic sedimentology for litho-geomorphological facies analysis of a coal-dominated deltaic reservoir, Northern Malay Basin. In: UNSPECIFIED.

Bashir, Y. and Ghosh, D.P. and Sum, C.W. and Mahgoub, M. (2018) Depth imaging using innovative algorithm for high-resolution seismic. In: UNSPECIFIED.

C

Cheong, M.-F. and Liu, W.-W. and Khe, C.-S. and Hidayah, N.M.S. and Lee, H.C. and Teoh, Y.-P. and Foo, K.L. and Voon, C.H. and Zaaba, N.I. and Adelyn, P.Y.P. (2018) Green synthesis of reduced graphene oxide decorated with iron oxide nanoparticles using Oolong Tea extract. In: UNSPECIFIED.

Chuan Ching, D.L. (2018) Mathematical model of vector potential and magnetic surface density of geophone SM-24. In: UNSPECIFIED.

Chandran, K. and Fai Kait, C. and Mohd Zaid, H.F. (2018) Morphology of titanium dioxide synthesized via precipitation technique: Effect of calcination and reflux on the surface morphology. In: UNSPECIFIED.

Chung Hua, B.D. and Fahmi, H. and Yuhao, L. and Kiong, C.C. and Harun, A. (2018) Internet of Things (IOT) Monitoring System for Elderly. In: UNSPECIFIED.

Chan, G.C.Y. and Shah, S.A.A. and Tang, T.B. and Lu, C.-K. and Muller, H. and Meriaudeau, F. (2018) Deep Features and Data Reduction for Classification of SD-OCT Images: Application to Diabetic Macular Edema. In: UNSPECIFIED.

Cr, S. and Mani, G. and Kannan, R. (2018) Multilayer Analysis for Prediction of Power Tracing on Uncertain Loads. In: UNSPECIFIED.

Cheng, S.W.Y. and Kurnia, J.C. and Isa, M.S.M. and Ashraf, S. (2018) Numerical investigation on the heat transfer of wellbore heat extractor. In: UNSPECIFIED.

Chala, G.T. and Lim, Y.P. and Sulaiman, S.A. and Liew, C.L. (2018) Thermogravimetric analysis of empty fruit bunch. In: UNSPECIFIED.

Chikere, A.O. and Al-Kayiem, H.H. and Karim, Z.A.A. (2018) Thermal Diffusion Performance of a Diffuser by various Guide Vanes configurations. In: UNSPECIFIED.

Chand, M.R.R. and Basrawi, F. and Aziz, A.A. and Azran, Z. and Sulaiman, S.A. and Zulkepli, A. (2018) Evaluation on Methods in Estimating the Photovoltaic Performances Affected by Module Operation Temperature in Tropical Region. In: UNSPECIFIED.

Chan, G.C.Y. and Kamble, R. and Muller, H. and Shah, S.A.A. and Tang, T.B. and Meriaudeau, F. (2018) Fusing Results of Several Deep Learning Architectures for Automatic Classification of Normal and Diabetic Macular Edema in Optical Coherence Tomography. In: UNSPECIFIED.

Chuan, N.K. and Ahmad, W.F.W. and Sivaji, A. (2018) Designing Page Scrolling Gesture using Gesture-Specific Heuristics in Leap Motion Validating The Gesture-Specific Heuristics By Creating Optimal Gestures. In: UNSPECIFIED.

Chengyee, N. and Adha, T.S.N. and Kurian, V.J. and Loon, L.W. (2018) Ocean Wave-Structure Interaction of Two Wave Energy Converters in Malaysian Water. In: UNSPECIFIED.

Chew, J.S.L. and Ho, A.Y.Y. and Lim, B.C. and Chan, W.L. and Ho, Y.C. and Lim, J.W. and Lai, S.O. (2018) New Natural Coagulant Aid in Water Treatment. In: UNSPECIFIED.

Choi, H.-S. and Kim, D.K. and Kim, S. and Cheon, E.-J. and Kim, K.-S. (2018) Subsea Equipment Decommissioning Using Fiber Rope. In: UNSPECIFIED.

Chong, S.L. (2018) Student-centredness in Engineering Education: Where goes the teacher? In: UNSPECIFIED.

Chee, C.-H. and Jaafar, J. and Aziz, I.A. (2018) FP-NoSQL: An Efficient Frequent Itemset Mining Algorithm Using the FP-DB Approach. In: UNSPECIFIED.

Cv, A. and Kannan, R. and Lei, H.J. and Setiawan, J.D. (2018) Design studies of inner and outer embedded Permanent Magnet for hybrid electric vehicles. In: UNSPECIFIED.

Chea, T.B. and Akhir, N.A.M. and Idris, A.K. (2018) Investigation on the effect of types of nanoparticles and temperature on nanoparticles-foam stability. In: UNSPECIFIED.

D

Deshpande, A.V. and Kannan, R. and Subashini, M.M. (2018) Study of Various Image De-Noising Methods Used for the Purpose of Traffic Sign Board Recognition in an Intelligent Advanced Driver Assistance System. In: UNSPECIFIED.

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Firmansyah, F. (2018) Strategies and methods of RCCI combustion: A review. In: UNSPECIFIED.

Dan, N.E. and Mahmud, M.S. and Hussain, P. and Mohebbi, H. and Kakooei, S. (2018) Physical and mechanical properties of heat affected zone of dissimilar welds between duplex stainless steel and low carbon steel. In: UNSPECIFIED.

Dan, N.E. and Mohd Sabri, S.N.S. and Hussain, P. and Mohebbi, H. (2018) The Influence of Nitrogen on the Wear Resistance of Ferritic Stainless Steel. In: UNSPECIFIED.

Draz, M.U. (2018) Teaching accounting to engineering students and the use of concept mapping: A preliminary review. In: UNSPECIFIED.

Danaei, S. and Hermana, M. and Ghosh, D.P. (2018) 4D seismic qualitative interpretation for water injection monitoring: Case study in Southeast Asia. In: UNSPECIFIED.

E

Elashmawy, M. and Elamvazuthi, I. and Al-Quraishi, M.S. (2018) An Exploratory Study of Thermal Imaging for Diagnosis of Work-related Musculoskeletal Disorders. In: UNSPECIFIED.

El-Adawy, M. and Heikal, M.R. and Aziz, A.R.A. and Ismeal, M.A. and Wahhab, H.A.A. (2018) Characterization of the effect of pressure difference on in-cylinder flow field using proper orthogonal decomposition (POD). In: UNSPECIFIED.

Evelyn, E. and Aziz, A.R.A. and Firmansyah, F. and Abidin, E.Z.Z. (2018) A review on the operating characteristics of free piston engine and its recent developments. In: UNSPECIFIED.

Elghool, A. and Naeem, M.F. and Basrawi, F. and Ibrahim, H. and Idris, D. and Habib, K. and Yusof, M.H. (2018) Analysis on the Performance of a Prototype of Thermoelectric based Power Generation System. In: UNSPECIFIED.

Elghool, A. and Basrawi, F. and Ibrahim, H. and Ibrahim, T.K. and Sulaiman, S.A. and Ishak, M. (2018) Study on the Performance of a Thermo-Electric Generation Model with Two Different Materials of Heat Pipe-Heat Sink. In: UNSPECIFIED.

Edmund, J.E. and Mustaffa, Z.B. (2018) Numerical Analysis of Crack Failure of Reinforced Thermoplastic Pipe (RTP). In: UNSPECIFIED.

Egambaram, A. and Badruddin, N. and Asirvadam, V.S. and Fauvet, E. and Stolz, C. and Begum, T. (2018) Unsupervised Eye Blink Artifact Identification in Electroencephalogram. In: UNSPECIFIED.

F

Foo, K.S. and Khan, M.S. and Lal, B. and Sufian, S. (2018) Semi-clathratic impact of tetrabutylammonium hydroxide on the carbon dioxide hydrates. In: UNSPECIFIED.

Farrukh, S. and Tahir, N.A. and Hussain, A. and Ayoub, M. and Rafiq, M. and Khan, M.H. (2018) Fabrication and analysis of HNBR-Silica / Carbon Phenolic ablative composites as an effective thermal protection system (TPS). In: UNSPECIFIED.

Foong, F.M. and Ket, T.C. and Lee, O.B. and Abdul Aziz, A.R. (2018) A Novel Design to Increase the Power Output of an Electromagnetic Vibration Energy Harvester Using Finite Element Analysis. In: UNSPECIFIED.

Fakruldin, A. and Ramli, A. and Abdul Mutalib, M.I. (2018) Effect of preparation method on physicochemical properties of Fe/zeolite catalyst. In: UNSPECIFIED.

Foong, F.M. and Ket Thein, C. and Abdul Aziz, A.R. (2018) Effect of Electromagnetic Damping on the Optimum Load Resistance of an Electromagnetic Vibration Energy Harvester. In: UNSPECIFIED.

Feng, Y.X. and Ung, W.C. and Dass, S.C. and Mohd Hani, A.F. and Tang, T.B. and Wei Ho, E.T. (2018) Temporal Haemodynamic Measures of Mood and Work Load Effects on Working Memory Performance. In: UNSPECIFIED.

Firmansyah and Morgan, R. and Heikal, M.R. and Aziz, A.R.A. (2018) Effect of pressure in crossover port to the in-cylinder flow of split-cycle engine. In: UNSPECIFIED.

Foroozesh, J. and Dier, M.A. and Rezk, M.G. (2018) A simulation study on CO2 sequestration in saline aquifers: Trapping mechanisms and risk of CO2 leakage. In: UNSPECIFIED.

Faraz, S. and Ali, S.S.A. and Adil, S.H. (2018) Machine Learning and Stress Assessment: A Review. In: UNSPECIFIED.

Foong, F.M. and Ket, T.C. and Lee, O.B. and Abdul Aziz, A.R. (2018) Validation of Analytical Damping Ratio by Fatigue Stress Limit. In: UNSPECIFIED.

Fadhil Majnis, M. and Francis, H. and Zilati Ku Shaari, K. (2018) Droplet formation in microchannels at low values of the capillary and the reynolds numbers. In: UNSPECIFIED.

Fakhrul Ridhwan Samsudin, M. and Sufian, S. and Bashiri, R. and Muti Mohamed, N. and Tau Siang, L. and Mahirah Ramli, R. (2018) Optimization of photodegradation of methylene blue over modified TiO2/BiVo4 photocatalysts: Effects of total TiO2 loading and different type of co-catalyst. In: UNSPECIFIED.

Fakhrul Ridhwan Samsudin, M. and Tau Siang, L. and Sufian, S. and Bashiri, R. and Muti Mohamed, N. and Mahirah Ramli, R. (2018) Exploring the role of electron-hole scavengers on optimizing the photocatalytic performance of BiVO4. In: UNSPECIFIED.

G

Gan, D.K.W. and Chin, B.L.F. and Loy, A.C.M. and Yusup, S. and Acda, M.N. and Unrean, P. and Rianawati, E. and Jawad, Z.A. and Lee, R.J. (2018) An In-Situ Thermogravimetric Study of Pyrolysis of Rice Hull with Alkali Catalyst of CaCO 3. In: UNSPECIFIED.

Guong, R.L.L. and Hisham, S.B. and Elamvazuthi, I. and Aole, S. and Parasuraman, S. and Khan, M.K.A.A. (2018) PID Tuning of Process Plant using Particle Swarm Optimization. In: UNSPECIFIED.

Goyal, S. and Shaharun, M.S. and Kait, C.F. and Abdullah, B. (2018) Effect of monometallic copper on zeolitic imidazolate framework-8 synthesized by hydrothermal method. In: UNSPECIFIED.

Guan, M. and Ali, M.O.A. and Ng, C.Y. (2018) Effect of Water Depths on the Hydrodynamic Responses of an FPSO Platform. In: UNSPECIFIED.

Gohari, A. and Matori, N. and Wan Yusof, K. and Toloue, I. and Cho Myint, K. (2018) Effects of the Fuel Price Increase on the Operating Cost of Freight Transport Vehicles. In: UNSPECIFIED.

Guan, M. and Osman, M. and Ng, C.Y. (2018) Prediction of Deepwater FPSO responses using different numerical analysis methods. In: UNSPECIFIED.

Gheshmi, M.S. and Fatahiyan, S.M. and Khanesary, N.T. and Sia, C.W. and Momeni, M.S. (2018) Investigating the effects of rock porosity and permeability on the performance of nitrogen injection into a southern Iranian oil reservoirs through neural network. In: UNSPECIFIED.

Ghaheri, S. and Suhaili, M. and Sapari, N. and Momeni, M. (2018) Sedimentary architecture and depositional environment of Kudat Formation, Sabah, Malaysia. In: UNSPECIFIED.

Gbadamosi, A.O. and Junin, R. and Oseh, J.O. and Agi, A. and Yekeen, N. and Abdalla, Y. and Ogiriki, S.O. and Yusuff, A.S. (2018) Improving hole cleaning efficiency using nanosilica in water-based drilling mud. In: UNSPECIFIED.

Ghosh, D. and Babasafari, A. and Ratnam, T. and Sambo, C. (2018) New workflow in reservoir modelling - Incorporating high resolution seismic and rock physics. In: UNSPECIFIED.

Ghon, G. and Rankey, E.C. and Baechle, G.T. and Schlaich, M. and Ali, S.H. and Mokhtar, S. and Poppelreiter, M.C. (2018) Carbonate reservoir characterisation of an isolated platform integrating sequence stratigraphy and rock physics in central luconia. In: UNSPECIFIED.

Ganie, K. and Manan, M.A. and Idris, A.K. (2018) Formulation of lignin based surfactant using extracted lignin from ultrasound-assisted technique for enhanced oil recovery. In: UNSPECIFIED.

Gupta, A. and Kumar, A. and Sharma, K.V. and Gupta, R. (2018) Application of High Conductive Nanoparticles to Enhance the Thermal and Mechanical Properties of Wood Composite. In: UNSPECIFIED.

H

Ho, S. and Elamvazuthi, I. and Lu, C.K. (2018) Classification of Rheumatoid Arthritis using Machine Learning Algorithms. In: UNSPECIFIED.

Hussain, A. and Muthuvalu, M.S. and Faye, I. and Ali, M.K.M. and Lebelo, R.S. (2018) Numerical Study of Glioma Growth Model with Treatment Using the Two-Stage Gauss-Seidel Method. In: UNSPECIFIED.

Hamza, M.F. and Soleimani, H. and Merican, Z.M.A. and Sinnathambi, C.M. and Stephen, K.D. (2018) One-pot Synthesis and Static Bulk Foam Studies of C 18 -conjugated Zwitterionic Surfactant. In: UNSPECIFIED.

Hidayat Chai, M.H. and Amir, N. and Yahya, N. and Saaid, I.M. (2018) Characterization and Colloidal Stability of Surface Modified Zinc Oxide Nanoparticle. In: UNSPECIFIED.

Heng, G.C. and Isa, M.H. and Lim, M.H. (2018) Effect of H2O2 Oxidation/Alkaline Hydrolysis on Waste Activated Sludge Disintegration and Dewaterability. In: UNSPECIFIED.

Husain, K. and Awang, A. and Kamel, N. (2018) Performance Evaluation of a Receiver-Based Routing Protocol in Vehicular Ad-Hoc Networks. In: UNSPECIFIED.

Han, F.L. and Drieberg, M. and Mohammad Azam, S.F. and Sebastian, P. and Hiung, L.H. (2018) An Internet of Things Environmental Monitoring in Campus. In: UNSPECIFIED.

Hizam, S.M. and Nordin, N.A.H.M. and Bilad, M.R. and Wirzal, M.D.H. and Putra, Z.A. and Sambudi, N.S. and Nasef, M.M.E. (2018) The Effect of Concentration Staging on Performance of Produced Water treatment using Forward Osmosis. In: UNSPECIFIED.

Halim, N.S.A. and Wirzal, M.D.H. and Bilad, M.R. and Yusoff, A.R.M. and Nordin, N.A.H.M. and Putra, Z.A. and Jaafar, J. (2018) Effect of Solvent Vapor Treatment on Electrospun Nylon 6,6 Nanofiber Membrane. In: UNSPECIFIED.

Han, C.Y. and Parasuraman, S. and Elamvazhuthi, I. and Deisy, C. and Padmavathy, S. and Ahamed Khan, M.K.A. (2018) Vision Guided Soccer Robot. In: UNSPECIFIED.

Hardjasudjana, A.W. and Kosalishkwaran, G. and Parasuraman, S. and Elamvazhuthi, I. and Jeba Singh, D.K. and Deisy, C. and Padmavathy, S. (2018) Image Analysis of Spine and Related Mechanical Investigations. In: UNSPECIFIED.

Husna, O.N. and Mazli, M. and Mokhtar, C.I. (2018) Surface Modification of Zinc Oxide by 3-aminopropyltiethoxysilane and a Comparative Study of Effect of Corrosion on Carbon Steel with Epoxy Containing Graphene Oxide-Zinc Oxide (GO-ZnO) Hybrids. In: UNSPECIFIED.

Hussein, A.R. and Albarody, T.M.B. and Yousf, P.S.M.B.M. and Abdullah, M.A. and Al-Jothery, H.K.M. (2018) Permittivity and Permeability Characterization of SiC and Ferro Metals for Structural Health Monitoring Utilization. In: UNSPECIFIED.

Halim, L.A. and Basrawi, F. and Chong, J.Z. and Oumer, A.N. and Yudin, A.S.M. and Yusof, M.H.B. and Sulaiman, S.A. (2018) Preliminary Study on Drying of Stingless Bee Pot Pollen Using Novel Fluidized Bed Dryer with Swirling Distributor. In: UNSPECIFIED.

Hassan, S. and Afdhal, S. and Shahrizal, M. and Eleena, A. (2018) Simulation Study on the Potential of Braided Hose Failure in Internal Combustion Engines. In: UNSPECIFIED.

Han, T.D. and Razif, M.R.M. and Sulaiman, S.A. (2018) Study on Premature Failure of PV Systems in Malaysia using FMEA and Integrated ISM Approaches. In: UNSPECIFIED.

Hasan, K.N.M. and Ahmad, A.S. and Zakaria, Z.A. (2018) Interleaved 4-Phases DC/DC Converter for Electric Scooter to Improve Efficiency. In: UNSPECIFIED.

Hooi, Y.K. and Hassan, M.F. and Sharifff, M.A. (2018) Pragmatic Ontology Design Pattern for Contextual Integration. In: UNSPECIFIED.

Hamid, M.S.A. and Shafiq, N. (2018) Factors affecting the eco-efficiency design of reinforced concrete structure of low-rise and high-rise residential house in Malaysia. In: UNSPECIFIED.

Han, F.Y. and Komiyama, M. and Uemura, Y. and Rabat, N.E. (2018) One pot biodiesel production from wet Chlorella vulgaris using supercritical methanol with oxide catalysts. In: UNSPECIFIED.

Hasan, M.A. and Aqsha and Putra, Z.A. and Bilad, M.R. and Sapiaa, N.A.H. and Wirzal, M.D.H. and Tijani, M.M. (2018) Biogas production from chicken food waste and cow manure via multi-stages anaerobic digestion. In: UNSPECIFIED.

Halim, N.H. and Yunus, N.M. and Ap Wilfred, C.D. (2018) Thermophysical properties and CO2 absorption of ammonium-based ionic liquids. In: UNSPECIFIED.

Hassan, N.M.K.N. and Kamel, N.A.M.N.M. and Pauzi, M.F. and Teh, H.M. (2018) Construction Technology Used for the Reclamation of Seri Tanjung Pinang (Phase 2). In: UNSPECIFIED.

Hustim, M. and El Zaza, A. and Al Madhoun, W. and Heen, Z.A. and Aly, S.H. and Ramli, M.I. (2018) Assessing Noise Pollution and its Impact on Student's Blood Pressure and Their Learning Performance in Palestine. In: UNSPECIFIED.

Hoe, O.Y. and Mohamad, H. (2018) Comparison of Induced Deflection and Forces in Piles Adjacent to Tunnelling and Deep Excavation in 2D and 3D Problems. In: UNSPECIFIED.

Halim, A.H.A. and Mustaffa, Z. and Kim, D.K. (2018) Reliability Analysis of Vertical Well Casing: Comparison of API 5C3 and ISO 10400. In: UNSPECIFIED.

Huan, V.N.P. and Harahap, I.S.H. and Alaloul, W.S. (2018) Modelling of Tsunami Due to Submarine Landslide by Smoothed Particle Hydrodynamics Method. In: UNSPECIFIED.

Hashim, A.S. and Ahmad, R. and Shahrul Amar, M.S. (2018) Difficulties in Learning Structured Programming: A Case Study in UTP. In: UNSPECIFIED.

Hashim, A.M. and Shahruzzaman, D.B. and Yusof, N.Z. (2018) The role of structured academic visit in enhancing experiential learning for Coastal Engineering courses. In: UNSPECIFIED.

Hashim, A.M. and Shahruzzaman, D.B. and Yusof, N.Z. (2018) The role of structured academic visit in enhancing experiential learning for Coastal Engineering courses. In: UNSPECIFIED.

Hasan, M.L. and Mohyaldinn, M.E. and Hja Aziz, N.A. and Mohamed, M.A. (2018) Improving Students' Motivation to Learn through Gamification. In: UNSPECIFIED.

Halim, F.A.A. and Sugathan, S.K. and Ariffin, M.M. (2018) Towards a mobile app design model for Dyscalculia children. In: UNSPECIFIED.

Hossain, T.M. and Watada, J. and Hermana, M. and Shukri, S.R.B.M. and Sakai, H. (2018) A Rough Set Based Rule Induction Approach to Geoscience Data. In: UNSPECIFIED.

Hashim, A.S. and Lee, V.J.X. (2018) Usability of ShopCart among Customers at Shopping Malls. In: UNSPECIFIED.

Hussein, A.R. and Albarody, T.M.B. and Yusoff, P.S.M.B.M. (2018) Evaluation of Electromagnetic Near-Field Measurement Technique as Non-Destructive Testing for Composite Structures. In: UNSPECIFIED.

Husin, H. and Ahmad, N. and Jamil, N. and Chyuan, O.H. and Roslan, A. (2018) Evaluation on the Presence of Nano Silver Particle in Improving a Conventional Water-based Drilling Fluid. In: UNSPECIFIED.

Hidayah Ishak, N. and Mustafa Hashim, A. (2018) Dam pre-release as an important operation strategy in reducing flood impact in Malaysia. In: UNSPECIFIED.

Hamada, G. and Joseph, V. (2018) Developed correlations between sound wave velocity and porosity, permeability and mechanical properties of sandstone core samples. In: UNSPECIFIED.

Hamidi, R. and Ghosh, D. and Bashir, Y. (2018) A new approach to fractured damage zone evaluation using wavelet transform and variance attribute. In: UNSPECIFIED.

Hanamertani, A.S. and Manan, N.A. and Ahmed, S. and Pilus, R.M. (2018) Surface and interfacial tension behavior in the use of ionic liquids as additives for surfactant-based enhanced oil recovery. In: UNSPECIFIED.

Hassan, R. and Mahinderjit-Singh, M. and Hassan, H. and Yuhaniz, S.S. (2018) Online Islamic business enhancer tool (OIBET) for young entrepreneurs. In: UNSPECIFIED.

Hatta, S.A.M. and Zawawi, I. and Gupta, A. and Safwan Ahmad Nadzri, M. and Salleh, N.I. and Jeffry, S.J.M. and Md Sharif, N. and Ishak, I.H. and Azuwan Maoinser, M. (2018) Sand prediction for a cost-effective marginal green field development. In: UNSPECIFIED.

Habibur Rahman, M. and Pierson, B.J. and Yusoff, W.I.W. (2018) A new approach to classify microporosity in Miocene carbonate reservoirs of offshore Sarawak, Malaysia. In: UNSPECIFIED.

Husin, H. and Aman, Z. and Hwai Chyuan, O. (2018) Correlation between rate of deposition and temperature of asphaltene particles. In: UNSPECIFIED.

Herman, A.P. and Ismail, N.I. and Vaea, M.A. and Hasan, M.L. (2018) The impact of sand particle size and velocity on sand erosion of stainless steel plate using sand blasting technique. In: UNSPECIFIED.

I

Ismail, A.O.A. and Mahmood, A.K. (2018) The Influence of Technological Factors on Students' Academic Performance. In: UNSPECIFIED.

Ismail, A. and Cheong, L.Y. and Makhlof, S.A. and Allosh, M. (2018) Theoretical Study on Carbon Isotopes. In: UNSPECIFIED.

Irshad, S. and Awang, D.R.B. (2018) A UX oriented evaluation approach for mobile augmented reality applications. In: UNSPECIFIED.

Ibrahim, T.B. and Memon, A.H. and Memon, F. and Nallagowden, P. and Mohd Zamri, N.A. (2018) Modelling and Validation of Linear Synchronous Permanent Magnet Generator with Triangular Magnet-Array Configuration for Wave Energy Conversion. In: UNSPECIFIED.

Ibrahim, A.R. and Nik Ibrahim, N.H. and Harun, A.N. and Mohd Kassim, M.R. and Kamaruddin, S.E. and Meng, L.K. and Hui, C.J. and Witjaksono, G. (2018) Automated Monitoring and LoRaWAN Control Mechanism for Swiftlet Bird House. In: UNSPECIFIED.

Ismail, A. and Tang, T.B. and Ibrahima, F. and Cheng, C.H. (2018) Animal Model - Investigation of Laser Speckle Flowgraphy for Early Carotid Artery Stenosis Detection. In: UNSPECIFIED.

Ismail, L.S. and Zulkifl, S.A. and Hamid, N.H. (2018) Circuit Modeling and Analysis of Cardiovascular System Using Analog Circuit Analogy. In: UNSPECIFIED.

Ibrahim, N.H.N. and Brahim, A.R. and Mat, I. and Harun, A.N. and Witjaksono, G. (2018) IR 4.0 using IoT and LORAWAN to Accelerate Lentinula Edodes Growth. In: UNSPECIFIED.

Ibrahim, A.R. and Ibrahim, N.H.N. and Harun, A.N. and Kassim, M.R.M. and Kamaruddin, S.E. and Witjaksono, G. (2018) Bird Counting and Climate Monitoring using LoRaWAN in Swiftlet Farming for IR4.0 Applications. In: UNSPECIFIED.

Ismael, M.A. and Heikal, M.R. and Aziz, A.R.A. and Crua, C. and El-Adawy, M. (2018) The effect of unstable emulsion of water-in-diesel on micro-explosion phenomena. In: UNSPECIFIED.

Inayat, M. and Sulaiman, S.A. (2018) Effect of Blending Ratio on Quality of Producer Gas from Co-Gasification of Wood and Coconut Residual. In: UNSPECIFIED.

Ismaeel, A.A. and Al-Kayiem, H.H. and Baheta, A.T. and Aurybi, M.A. (2018) Computational analysis of the inflow air slot size influence on solar vortex generator peformance. In: UNSPECIFIED.

Inayat, M. and Sulaiman, S.A. and Hung, T.W. and Guangul, F.M. and Basrawi, F. (2018) Effect of limestone catalyst on co-gasification of coconut fronds and wood chips. In: UNSPECIFIED.

Ismadi, M.Z.P. and Kurnia, J.C. and Sulaiman, S.A. and Hassan, S. and Awang, M. and Yusoff, P.S.M.M. and Urquia, A. (2018) The Need of Computer Modelling and Simulation (CMS) Competency among Employers in Malaysia. In: UNSPECIFIED.

Inayat, M. and Sulaiman, S.A. and Naz, M.Y. (2018) Thermochemical Characterization of Oil Palm Fronds, Coconut Shells, and Wood as A Fuel for Heat and Power Generation. In: UNSPECIFIED.

Imran, M. and Liew, M.S. and Nasif, M.S. and Gracia, E.M. and Danyaro, K.U. and Niazi, M.U. (2018) Thermal and Mechanical Response of Partially Protected Steel I-Beam under Fire. In: UNSPECIFIED.

Isam, M. and Baloo, L. and Sapari, N. and Nordin, I. and Yavari, S. and Al-Madhoun, W. (2018) Removal of Lead using Activated Carbon Derived from Red Algae (Gracilaria Changii). In: UNSPECIFIED.

Irawan, R. and Liew, M.S. and Ali, M.O.A. and Al Yacouby, A.M. (2018) Prediction of dynamic responses of floating structures using NARX with mirroring technique. In: UNSPECIFIED.

Idress, M. and Chew, K.H. (2018) Implementation of Cooperative Learning to Enhance Student Learning in Well Stimulation Technique Class. In: UNSPECIFIED.

Ismail, N.I. and Md Yusof, M.A. and Herman, A.P. (2018) Work Based Learning Strategy through a Strutured Industrial Internship Program for Undergraduate. In: UNSPECIFIED.

Idrus, H. (2018) Important soft skills to be integrated in the teaching of technical courses: Views of lecturers versus students. In: UNSPECIFIED.

Idrus, H.B. and Embong, A.M. and Abu Bakar, Z.B. (2018) Improving English Language Ability for Engineering and Technology Students through Focusing on Grammar. In: UNSPECIFIED.

Irfan, M. and Ahmad, T. and Moniruzzaman, M. and Abdullah, B. (2018) Ionic liquid functionalized synthesis of gold nanoparticles in response to Elaise Guineensis (oil palm) leaves amount. In: UNSPECIFIED.

Imran, M. and Liew, M.S. and Garcia, E.M. and Nasif, M.S. and Yassin, A.Y.M. and Niazi, U.M. (2018) Deformation and Heat Transfer on Three Sides Protected Beams under Fire Accident. In: UNSPECIFIED.

Ibrahim, N.A. and Wirzal, M.D.H. and Nordin, N.A.H. and Abd Halim, N.S. (2018) Development of Polyvinylidene fluoride (PVDF)-ZIF-8 Membrane for Wastewater Treatment. In: UNSPECIFIED.

Idris, A. and Harahap, I.S.H. and Ahmed Ali, M.O. (2018) Variation of Time Domain Failure Probabilities of Jack-up with Wave Return Periods. In: UNSPECIFIED.

Irawan, S. and Kalwar, S.A. and Abbas, G. and Kumar, S. (2018) An innovative solution for preventing gas migration through cement slurry in the lower Indus basin of Pakistan. In: UNSPECIFIED.

Islam, M.A. and Mohd Yusri, M.A. and Shalaby, M.R. and Salam, M.A. and Latiff, A.H.A. (2018) Evaluation of petrophysical parameters and reservoir potential of boka bil and bhuban formations of surma basin, Bangladesh: A case study of rashidpur gas field using well log. In: UNSPECIFIED.

Idress, M. and Jasamai, M. and Naim Yuhaznel, F. and Peng, W. and Karimi, N. (2018) Preliminary study of natural polymer as kinetic hydrate inhibitor. In: UNSPECIFIED.

Idress, M. and Jasamai, M. and Syimir Afandi, M. (2018) Modelling on Gas Hydrate Kinetics in Presence of Saline Water in Porous Media. In: UNSPECIFIED.

Ismail, N.I. and Prakasan, A. and Herman, A.P. and Hasan, M.L. and Sapari, N. (2018) Qualitative characterization of geotextile material for downhole application. In: UNSPECIFIED.

J

Jeremiah, S.S. and Zabiri, H. and Ramasamy, M. and Kamaruddin, B. and Teh, W.K. and Mohd Amiruddin, A.A.A. (2018) IAM: An Intuitive ANFIS-based method for stiction detection. In: UNSPECIFIED.

Jusoh, S.N. and Mohamad, H. and Marto, A. and Kassim, F. (2018) Assessment on segment joint to improve soil-tunnel interaction. In: UNSPECIFIED.

Jahan, S. and Sakidin, H. and Nazar, R. and Pop, I. (2018) Stability Analysis of 3D flow over a deforming surface with suction effect: A Buongiorno's model. In: UNSPECIFIED.

Joshi, A. and Kadethankar, A. and Patwardhan, V. and Porwal, P. and Pachade, S. and Kokare, M. and Meriaudeau, F. (2018) Glaucoma Screening Through Level Set for Optic Disc Segmentation and Textural Features for Classification. In: UNSPECIFIED.

Jangra, A. and Chouhan, A. and Jangra, P. and Singh, N. (2018) Efficient Utilization of Cloud Based IoT Services Using Ontology System. In: UNSPECIFIED.

Jawed, S. and Amin, H.U. and Malik, A.S. and Faye, I. (2018) Differentiating between Visual and Non-Visual Learners Using EEG Power Spectrum Entropy. In: UNSPECIFIED.

Jun, L.Q. and Bin Djaswadi, G.W. and Bin Hawari, H.F. and B Zakariya, M.A. (2018) Simulation of Interdigitated Electrodes (IDEs) Geometry Using COMSOL Multiphysics. In: UNSPECIFIED.

Jessam, R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2018) Experimental and numerical analysis of different flow modifier on the reversal flow region in s-shaped aggressive diffuser. In: UNSPECIFIED.

Jaffry, M.N.M. and Abdul Karim, Z.A. and Ramlan, N.A. and Mohammed, S.E. and Zainal, E.Z. and Firmansyah and Ahmad, A.S. and Baharom, M.B. and Heikal, M.R. and Aziz, A.R.A. (2018) Bouncing phenomena of free piston linear generator at starting process. In: UNSPECIFIED.

Jamaluddin, A.A. and Mehat, N.M. and Kamaruddin, S. (2018) Effect of processing parameters on the shrinkage behaviour of injection moulded polypropylene gear. In: UNSPECIFIED.

Jamaludin, A.A. and Mehat, N.M. and Kamaruddin, S. (2018) PDC cutter optimization using response surface methodology with orthogonal arrays. In: UNSPECIFIED.

Jamil, A. and Baharom, M.B. and Lemma, T.A. (2018) Mathematical Modelling and Transient Thermal Analysis of Coupler-Rocker Bearing. In: UNSPECIFIED.

Jessam, R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2018) Comparative Study on the Performance of S-Shaped Diffuser with Shorten Length. In: UNSPECIFIED.

Jamali, A.A. and Nor, N.M. and Ibrahim, T. and Romlie, M.F. and Khan, Z. (2018) Impact of Photovoltaic Plant Outputs in Distribution Networks. In: UNSPECIFIED.

Jung, L.T. and Ali Wagan, A. (2018) Distributed Network Mobility Management Scheme for Network Mobility. In: UNSPECIFIED.

Jamaludin, N. and Monsi, M. and Hassan, N. (2018) The performance of the interval midpoint zoro symmetric single-step (IMZSS2-5D) procedure to converge simultaneously to the zeros. In: UNSPECIFIED.

Johl, S.K. and Umrani, A.I. and Munodawafa, R.T. (2018) A Comparative Study of Active Learning with and Without Using Mind Mapping Approach. In: UNSPECIFIED.

Jusoh, S.N. and Mohamad, H. and Marto, A. and Abdullah, R.A. and Yunus, N.M. (2018) 3D Numerical Model of Soil-Tunnel Interaction Induced by Segment Joint Parameter. In: UNSPECIFIED.

Juhani, J.M. and Ibrahim, R. (2018) Mother Wavelet Selection for Control Valve Leakage Detection using Acoustic Emission. In: UNSPECIFIED.

Jakeri, M.M. and Hassan, M.F. (2018) A review of factors influencing the implementation of secure framework for in-house web application development in Malaysian public sector. In: UNSPECIFIED.

Jatoi, M.A. and Kamel, N. and Gaho, A.A. and Dharejo, F.A. (2018) Bayesian Framework based Brain Source Localization Using High SNR EEG Data. In: UNSPECIFIED.

Jung, L.T. and Haruna, A.A. (2018) Green data center by incentive-based job scheduling approach. In: UNSPECIFIED.

Jibril, Z.I. and Ramli, A. and Jumbri, K. (2018) Preparation and Characterization of Ce-Zr/Al-MCM-41 Bimetallic Catalyst for Transesterification of Jatropha Oil to Biodiesel. In: UNSPECIFIED.

Jamil, N. and Husin, H. and Aman, Z. and Hassan, Z. (2018) Investigation on the effect of THF on Nitrogen Hydrate formation under isobaric condition. In: UNSPECIFIED.

Jiskani, I.M. and Zhou, W. and Chalgri, S.R. and Cai, Q. and Behrani, P. and Aziz, R. (2018) Prevalence of musculoskeletal disorders and assessment of workplace factors: A case of coal mine in Pakistan. In: UNSPECIFIED.

Janssen, M.T.G. and Zitha, P.L.J. and Pilus, R.M. (2018) Oil recovery by alkaline-surfactant-foam asf flooding: Effect of drive foam quality on oil bank propagation. In: UNSPECIFIED.

Jai Krishna Sahith, S. and Venkateswara Rao, K. and Srinivasa Rao, P. (2018) Design and Surge Study of Salaya Mathura Pipeline for Higher Throughput of Crude Oil Transportation. In: UNSPECIFIED.

K

Khan, M.I. and Zaini, D. and Shariff, A.M. and Athar, M. and Shamim, M.Y. (2018) Estimation of safe environmental concentrations of ionic liquids towards bacteria by chemical toxicity distribution method. In: UNSPECIFIED.

Khan, M.S. and Bavoh, C.B. and Lal, B. and Keong, L.K. and Mellon, N.B. and Bustam, M.A. and Shariff, A.M. (2018) Application of Electrolyte Based Model on Ionic Liquids-Methane Hydrates Phase Boundary. In: UNSPECIFIED.

Kartikawati, N.A. and Lal, B. and Mutalib, M.I.B.A. and Sufian, S.B. and Shariff, A.M. (2018) Density Measurement of Aqueous solution of Tetrapropylammonium Hydroxide at different Temperatures and Concentrations: Data and Correlation. In: UNSPECIFIED.

Kassim, Z. and Khan, M.S. and Lal, B. and Partoon, B. and Shariff, A.M. (2018) Evaluation of Tetraethylammonium Chloride on Methane Gas Hydrate Phase Conditions. In: UNSPECIFIED.

Kaur, H. and Japper-Jaafar, A. and Yusup, S. (2018) Carboxymethyl cellulose from cavendish banana peel as a drag reduction agent. In: UNSPECIFIED.

Kusakabe, K. and Miyazaki, H. and Sakuragi, M. and Ikeda, N. and Guan, G. and Uemura, Y. (2018) Interfacial behaviours during biodiesel synthesis in alkaline methanol phase. In: UNSPECIFIED.

Karar, O. and Emani, S. and Gounder, R.M. and Mukhtar, H. (2018) CFD simulations of convective heat transfer in actively heated tube bundle. In: UNSPECIFIED.

Khan, M.K.A.A. and Manzoor, S. and Marais, H. and Aramugam, K. and Elamvazuthi, I. and Parasuraman, S. (2018) PID Controller design for a Magnetic Levitation system. In: UNSPECIFIED.

Kamble, R.M. and Aujih, B. and Kokare, M. and Meriaudeau, F. (2018) Detection of Bright and Dark Lesions from Color Fundus Images Using Delta-Rank Transform. In: UNSPECIFIED.

Kardan, R. and Baharom, M.B. and Mohammed, S.E. and Aziz, A.R.A. and Zainal, A.E.Z. and Firmansyah (2018) The effect of engine throttle position on the performance characteristics of a crank-rocker engine fitted with a conventional cylinder head. In: UNSPECIFIED.

Kayshan, F.K. and AlQahtani, H.O. and Elamvazuthi, I. and Tageldeen, M. and Parasuraman, S. and Khan, M.K.A.A. (2018) Design and Analysis of Upper Arm Exoskeleton with Virtual Reality based Motion Tracking Capabilities. In: UNSPECIFIED.

Karim, S.A.B.A. and Suresh Kumar Raju, S. (2018) Wind Velocity Data Interpolation Using Rational Cubic Spline. In: UNSPECIFIED.

Karim, Z.A.A. and Khan, M.Y. (2018) Experimental Investigation of Performance and Emission Characteristics of IDI Diesel Engine Using Homogenized Water in Bio-Diesel Emulsion. In: UNSPECIFIED.

Karim, S.A.B.A. and Saaban, A. (2018) Visualization Terrain Data Using Cubic Ball Triangular Patches. In: UNSPECIFIED.

Khlief, A.K. and Gilani, S.I.U. and Al-Kayiem, H.H. and Mohammad, S.T. (2018) Design a New Receiver for the Central Tower of Solar Energy. In: UNSPECIFIED.

Koh, K. and Al-Kayiem, H.H. and Kurnia, J.C. (2018) Thermal Comfort Assessment of an Office Building in Tropical Climate Condition. In: UNSPECIFIED.

Khan, M.M. and Mokhtar, A.A. and Hussin, H. and Muhammad, M. (2018) Prediction for CUI in Piping Systems using Fuzzy Logic with Sensitivity Analysis of Corrosion Producing Factors. In: UNSPECIFIED.

Kurnia, J.C. and Sasmito, A.P. (2018) Numerical Evaluation of Heat Transfer and Entropy Generation of Helical Tubes with Various Cross-sections under Constant Heat Flux Condition. In: UNSPECIFIED.

Karim, Z.A.A. and Tee, D. and Khan, M.Y. and Hagos, F.Y. (2018) Investigation of Water-in-Biodiesel Emulsion Characteristics Produced by Ultrasonic Homogenizer. In: UNSPECIFIED.

Kadir, W.N.A. and Lam, M.K. and Uemura, Y. and Lim, J.-W. and Lee, K.T. (2018) Harvesting and pre-treatment of microalgae biomass via ozonation for lipid extraction: A preliminary study. In: UNSPECIFIED.

Kaliappan, S.K. and Siyal, A.A. and Man, Z. and Lay, M. and Shamsuddin, R. (2018) Effect of pore forming agents on geopolymer porosity and mechanical properties. In: UNSPECIFIED.

Khoo, C.M. and Idris, N.I.S.I. and Mohamad, H. and Rashid, A.S.A. (2018) Numerical Evaluation of Settlement trough Width Parameter. In: UNSPECIFIED.

Kanapathy, S. and Lee, K.E. and Mokhtar, M. and Sved Zakaria, S.Z. and Sivapalan, S. and Zahidi, A.M. (2018) The integration of sustainable development concept in Chemistry curriculum: A conceptual framework for the case of Pusat PERMAT Apintar� Negara. In: UNSPECIFIED.

Kashim, M.Z. and Tsegab, H. and Ayub, S.A. and Abu Bakar, Z.A.B. (2018) Numerical modeling of CO2 sequestration into basalt at high pressure and temperature with variable brine solutions. In: UNSPECIFIED.

Karim, S.A.A. and Ismail, M.T. and Hasan, M.K. and Sulaiman, J. (2018) Data interpolation using Runge Kutta method. In: UNSPECIFIED.

Khan, M.S. and Ahmed, I. and Lal, B. and Idris, A.-A. and Albeirutty, M.H. and Ayoub, M. and Sufian, S.B. (2018) Physicochemical and FTIR Study of Diesel-Hydrogen Peroxide Fuel Blend. In: UNSPECIFIED.

Khan, M.S. and Yaqub, S. and Manner, N. and Karthwathi, N.A. and Qasim, A. and Binti Mellon, N. and Lal, B. (2018) Experimental Equipment Validation for Methane (CH4) and Carbon Dioxide (CO2) Hydrates. In: UNSPECIFIED.

Khed, V.C. and Mohammed, B.S. and Nuruddin, M.F. (2018) Effects of different crumb rubber sizes on the flowability and compressive strength of hybrid fibre reinforced ECC. In: UNSPECIFIED.

Koh, C.K. and Chin, J.F. and Kamaruddin, S. (2018) Modified SPC for short run test and measurement process in multi-stations. In: UNSPECIFIED.

Kaur, H. and Jaafar, A. (2018) The effect of sodium hydroxide on drag reduction using banana peel as a drag reduction agent. In: UNSPECIFIED.

L

Lakhina, U. and Elamvazuthi, I. and Meriaudeau, F. and Ramasamy, G. and Jangra, A. (2018) Developing A Multi Agent System in JADE for Micro Grids. In: UNSPECIFIED.

Lee, K. and Shuhaili, F.M. and Zaid, H.M. and Guan, B.H. (2018) Neodymium (Nd) Doped Yttrium Iron Garnet (YIG) Nanofluid Activated by Electromagnetic Waves for Enhanced Oil Recovery (EOR). In: UNSPECIFIED.

Lawal, B. and Dennis, J.O. and Sovuthy, C. (2018) Design and Simulation of a Miniaturized RF-MEMS Reconfigurable Microstrip Combline Band Pass Filter. In: UNSPECIFIED.

Lebelo, R.S. and Moloi, K.C. and Chitumwa, C.C. and Sadiki, M.W.R. and Baloyi, P. and Muthuvalu, M.S. (2018) On Heat Transfer of a Convective Radiating Cylinder. In: UNSPECIFIED.

Lakhina, U. and Singh, N. and Elamvazuthi, I. and Meriaudeau, F. and Nallagownden, P. and Ramasamy, G. and Jangra, A. (2018) Threshold Based Load Handling Mechanism for Multi-Agent Micro Grid Using Cloud Computing. In: UNSPECIFIED.

Lawal, B. and Dennis, J.O. and Sovuthy, C. (2018) Miniaturized Reconfigurable Conductor-Backed Coplanar Waveguide Bandpass Filter. In: UNSPECIFIED.

Lim, D.C. and Al-Kayiem, H.H. and Kurnia, J.C. (2018) Comparison of different turbulence models in pipe flow of various Reynolds numbers. In: UNSPECIFIED.

Latip, A.S.A. and Matori, A.N. and Aobpaet, A. (2018) A Case Study on Offshore Platform Deformation Monitoring by using InSAR. In: UNSPECIFIED.

Latheef, M. and Abdulla, N. and Jupri, M.F.M. (2018) Wave current interaction: Effect on force prediction for fixed offshore structures. In: UNSPECIFIED.

Lew, C.L. and Hermana, M. and Ghosh, D.P. (2018) Improvised Approach Using SQp-SQs Attributes for Hydrocarbon Prediction: A Field Case Study in Malay Basin. In: UNSPECIFIED.

Lee, A.W.C. and Yong, S.-P. (2018) Localized Object Information from Detected Objects Based on Deep Learning in Video Scene. In: UNSPECIFIED.

Lim, Y.P. and Toh, Y.L. and Cheab, S. and Ng, G.S. and Wong, P.W. (2018) Chained-Function Waveguide Filter for 5G and beyond. In: UNSPECIFIED.

Lim, Y.P. and Toh, Y.L. and Cheab, S. and Lucyszyn, S. and Wong, P.W. (2018) Coupling matrix synthesis and design of a chained-function waveguide filter. In: UNSPECIFIED.

Lee, S.-P. and Mellon, N. and Shariff, A.M. and Leveque, J.-M. (2018) Adsorption of CO2 and Methane on Covalent Organic Polymer. In: UNSPECIFIED.

Lai, L.S. and Yeong, Y.F. and Lau, K.K. and Azmi, M.S. and Chew, T.L. (2018) Zeolitic Imidazolate Framework-8 Membrane for H2/CO2 Separation: Experimental and Modeling. In: UNSPECIFIED.

Lee, S.C.H. and Rafek, A.G. and Zakariah, M.N.A. (2018) Integration of high resolution geoelectrical resistivity and refraction seismic profiling for exploration of groundwater. In: UNSPECIFIED.

Lichter, H. and Sunetnanta, T. and Anwar, T. and Suwannasart, T. (2018) Report on the 6th international workshop on quantitative approaches to software quality (QuASoQ 2018). In: UNSPECIFIED.

Luqman Hasan, M. and Afiqah Zainol Abidin, N. and Singh, A. (2018) The rheological performance of guar gum and castor oil as additives in water-based drilling fluid. In: UNSPECIFIED.

Luqman Hasan, M. and Jantararas, J. and Mohd Zaki, R. and Azmi, A. (2018) Effects of temperature and injection rates on the performance of bio-polymer drag reducing agent. In: UNSPECIFIED.

Liu, C. and Ishikura, K. and Hermana, M. and Sum, C.W. and Ghosh, D.P. (2018) Applications of hydrocarbon prediction in Malaysian offshore using a new attribute in place of conventional AVO fluid factor. In: UNSPECIFIED.

M

Murugiah, P.S. and Oh, P.C. and Lau, K.K. (2018) Concatenation of carbonaceous nanofillers for mixed matrix membrane development. In: UNSPECIFIED.

Masri, A.N. and Abdul Mutalib, M.I. and Yahya, W.Z.N. and Aminuddin, N.F. and Leveque, J.-M. (2018) Thermokinetics of SO 3 H-functionalized dicationic ionic liquids: Effect of anions. In: UNSPECIFIED.

Muhsan, A. and Ishtiaq, U. and Rozali, A. and Mohamed, N. and Albarody, T. (2018) Nanocarbon-based enhanced squeeze treatment for improved scale management. In: UNSPECIFIED.

Muhammad, N.Z. and Harun, A. and Murad, S.A.Z. and Jambek, A.B. and Isa, M.N.M. and Mohyar, S.N. and Ismail, R.C. and Hawari, H.F. (2018) RTL platform validation of digital intellectual property (IP) of real time clock (RTC) for customized wireless microcontroller unit. In: UNSPECIFIED.

Mohd Aris, M.N. and Daud, H. and Dass, S.C. (2018) Processing synthetic seabed logging (SBL) data using Gaussian Process regression. In: UNSPECIFIED.

Mohamed, N.M. and Bashiri, R. and Shahid, M.U. and Kait, C.F. and Sufian, S. (2018) Potential Application of Metal-organic frameworks for Photocatalytic Water Splitting. In: UNSPECIFIED.

Mohd Nasir, I.N. and Ismail, M.T. and Abdul Karim, S.A. (2018) Malaysian Tapis: A Closer Look into Additive Outliers and Persistence Volatility. In: UNSPECIFIED.

Mohamed, N.M. and Shahid, M.U. and Mahinder Singh, B.S. and Joseph, E. and Mohamed Saheed, M.S. and Yar, A. and Bashiri, R. (2018) Polyaniline (PANI)/reduced graphene oxide (rGO) composite as a counter electrode for dye solar cells. In: UNSPECIFIED.

Murthe, S.S. and Mohamed Saheed, M.S. and Perumal, V. and Mohamed, N.M. and Mohamed Saheed, M.S. (2018) Effects of solvent ratio on the encapsulation of carbon nanotubes/Arthrospira platensis composite within electrospun poly(methyl methacrylate) nanofiber. In: UNSPECIFIED.

Mohamad Hanapi, A.L. and Othman, M. and Sokkalingam, R. and Sakidin, H. (2018) Developed A Hybrid Sliding Window and GARCH Model for Forecasting of Crude Palm Oil Prices in Malaysia. In: UNSPECIFIED.

Mathur, N. and Asirvadam, V.S. and Dass, S.C. (2018) Spatial-Temporal Visualization of Dengue Incidences Using Gaussian Kernel. In: UNSPECIFIED.

Marzuki, A. and Aziz, S.R.A. and Azni Zulkifli, T.Z. (2018) Solid State Lighting Driver IC Modeling Using Behavioral Simulation Technique. In: UNSPECIFIED.

Mani, G. and Sivaraman, N. and Kannan, R. (2018) Visual Servoing Based Model Reference Adaptive Control with Lyapunov Rule for a Ball on Plate Balancing System. In: UNSPECIFIED.

Masroor, K. and Jeoti, V. and Drieberg, M. (2018) Improving the Energy Efficiency of a Wireless Body Area Network Using a Redundant Coordinator for Healthcare Applications. In: UNSPECIFIED.

Mehedi, I.M. and Al-Saggaf, U.M. and Azhar Ali, S.S. (2018) Design and Simulation of Fractional Order Control Scheme for Rotary Flexible Link. In: UNSPECIFIED.

Memon, Z.Q. and Tran, C.M. and Pao, W. and Hashim, F.M. (2018) Two-phase slug flow separation at T-junction with regular and reduced vertical side arm. In: UNSPECIFIED.

Masri, M.M. and Evelyn, E. and Ahmad, A.S. and Tamili, S.N.A. and Abidin, E.Z.Z. and Firmansyah, F. and Aziz, A.R.A. and Heikal, M.R. (2018) Investigation on intake manifold volume in free-piston linear generator engine. In: UNSPECIFIED.

Mohammed, S.E. and Ramlan, N.A. and Aziz, A.R.A. and Firmansyah, F. and Ezrann Zainal, Z. (2018) Investigation of late fuel injection position on the combustion of free piston engine. In: UNSPECIFIED.

Mutafi, M.A. and Nasif, M.S. and Pao, W. and Ismail, F.B. (2018) Numerical investigation on the effect of fire compartment opening width and heat release rate on the horizontal projection of smoke plume in a full-scale atrium. In: UNSPECIFIED.

Majid, M.A.A. and Yamin, M.F. (2018) Study on the performance analysis of stratified thermal energy storage system of a district cooling plant. In: UNSPECIFIED.

Mahmud, A. and Megat-Yusoff, P.S.M. and Ahmad, F. (2018) Nano-silica effect on the poly (1, 8-octanediol citrate) composite properties for bone plate application. In: UNSPECIFIED.

Megat-Yussof, P.S.M. and Afolabi, L.O. and Arogundade, A.I. and Muriana, R.A. (2018) Effect of bauxite residue on the corrosion resistance of an intumescent paint coated steel plate. In: UNSPECIFIED.

Mandita, F. and Abdullah, H.M. and Anwar, T. and Assawinjaiptech, P. (2018) A novel algorithm for a grammar model checking using statistical Markov model. In: UNSPECIFIED.

Meyghani, B. and Awang, M.B. (2018) Prediction of the Temperature Distribution during Friction Stir Welding (Fsw) with A Complex Curved Welding Seam: Application in the Automotive Industry. In: UNSPECIFIED.

Moni, M.N.Z. and Sulaiman, S.A. and Baheta, A.T. (2018) Downdraft Co-gasification of Oil Palm Frond with Other Oil Palm Residues: Effects of Blending Ratio. In: UNSPECIFIED.

Mulubrhan, F. and Mokhtar, A.A. and Muhammad, M. (2018) Sensitivity Analysis of Fuzzy Activity-Based Life Cycle Costing. In: UNSPECIFIED.

Mohammad, S.T. and Al-Kayiem, H.H. and Gilani, S.I.U. and Khlief, A.K. (2018) Performance Comparison of Different Models of Direct Steam Solar Plants Based on Parabolic Trough Technology by Simulink MATLAB. In: UNSPECIFIED.

Mughal, B.M. and Tang Jung, L. and Wagan, A.A. (2018) Single-hop Packet Delivery Rate in V2V Safety Communications for Worst-case Highway Scenarios. In: UNSPECIFIED.

Mohd-Noor, S.-N. and Lim, J.-W. and Mah-Hussin, M.-T.-A. and Ramli, A. and Chew, T.-L. and Bashir, M.J.K. and Tan, W.-N. and Beniers, J.J.A. (2018) Potential of protein and lipid productions from black soldier fly larvae fed with mixture of waste coconut endosperm and soybean curd residue. In: UNSPECIFIED.

Musthafa, N.H. and Sulaiman, S. (2018) A review on accessible design requirement for mobile application among physically impaired users. In: UNSPECIFIED.

Mustafa, M.R.U. and Sholagberu, A.T. and Yusof, K.W. and Hashim, A.M. and Khan, M.W.A. and Shahbaz, M. (2018) SVM-Based Geospatial Prediction of Soil Erosion under Static and Dynamic Conditioning Factors. In: UNSPECIFIED.

Mellon, N. and Ramli, R.M. and Ekmi Rabat, N. and Amran, N.A. and Azizan, M.T. (2018) Instilling the 4Cs of 21stcentury skills through integrated project via Cooperative Problem Based Learning (CPBL) for chemical engineering students. In: UNSPECIFIED.

Mengal, A.N. and Karuppanan, S. and Qaisarani, Z.N. and Siddique, M. and Kashif, M. and Najam, M. (2018) In-plane shear strength analysis of Basalt Fiber-Reinforced Epoxy Laminates with Biowaste Catalyst Free Carbon. In: UNSPECIFIED.

Maulana, N.Z. and Shukri, S.R.M. (2018) Sketching profiles: For meaning making of graphical representation in children's drawing. In: UNSPECIFIED.

Mathur, N. and Asirvadam, V.S. and Abd Aziz, A. and Ibrahim, R. (2018) Visualizing and Predicting Reliability of Control Valves based on Simulation. In: UNSPECIFIED.

Matsumoto, Y. and Watada, J. (2018) Study of Knowledge Acquisition Using Rough Set Merging Rule from Time Series Data. In: UNSPECIFIED.

Mahamad, S. and Sulaiman, S. and Leng, W.Y. (2018) An Integrated Courier Services Application: A New User Experience. In: UNSPECIFIED.

Memon, M. and Bajwa, U.A. and Ikhlas, A. and Memon, Y. and Memon, S. and Malani, M. (2018) Blockchain beyond Bitcoin: Block Maturity Level Consensus Protocol. In: UNSPECIFIED.

Mohd Fauzi, N.H. and Aziz, I.A. and Mohd Jaafar, N.S. (2018) An early warning system for motorist to detect cyclist. In: UNSPECIFIED.

Mansor, R. and Zaini, B.J. and Othman, M. and Kasim, M.M. (2018) The effect of interval length in weighted subsethood fuzzy time series. In: UNSPECIFIED.

Mohammad, S.T. and Al-Kayiem, H.H. and Assadi, M.K. and Gilani, S.I.U.H. and Khlief, A.K. (2018) Performance and Simulation of a Stand-alone Parabolic Trough Solar Thermal Power Plant. In: UNSPECIFIED.

Mohamed, N.M. and Bashiri, R. and Kait, C.F. and Sufian, S. (2018) Photocatalytic water splitting over titania supported copper and nickel oxide in photoelectrochemical cell; Optimization of photoconversion efficiency. In: UNSPECIFIED.

Mazlina, M. and Liew, M.S. and Adnan, A. and Harahap, I.S.H. and Hamid, N.A. (2018) Determination of Shear Wave Velocity in Offshore Terengganu for Ground Response Analysis. In: UNSPECIFIED.

Muhthassim, B. and Thian, X.K. and Hasan, K.N.Md. (2018) Energy Harvesting from Salinity Gradient. In: UNSPECIFIED.

Mazlan, N.A. and Lai, G.T. and Razib, A.M.M. and Rafek, A.G. and Serasa, A.S. and Simon, N. and Surip, N. and Ern, L.K. and Mohamed, T.R. (2018) The geomechanical strength of carbonate rock in Kinta valley, Ipoh, Perak Malaysia. In: UNSPECIFIED.

Myint, K.C. and Matori, A.N. and Gohari, A. (2018) Application of GNSS Methods for Monitoring Offshore Platform Deformation. In: UNSPECIFIED.

Mehat, N.M. and Zakarria, N.S. and Kamaruddin, S. (2018) Optimization of Recycled Glass Fibre-Reinforced Plastics Gear via Integration of the Taguchi Method and Grey Relational Analysis. In: UNSPECIFIED.

Moayedfar, M. and Hanaei, H. and Rani, A.M. and Bin Musa, M.A. and Momeni, M.S. (2018) Early Shear Failure Prediction in Incremental Sheet Forming Process Using FEM and ANN. In: UNSPECIFIED.

Momeni, M.S. and Ridha, S. and Hosseini, S.J. and Meyghani, B. and Emamian, S.S. (2018) Bit selection using field drilling data and mathematical investigation. In: UNSPECIFIED.

Muruthy, S.P. and Ghosh, D.P. (2018) Integration of Seismic attributes, Petrophysics & Rock physics for Depositional environment and facies characterization. In: UNSPECIFIED.

Moussavi Alashloo, S.Y. and Ghosh, D. and Bashir, Y. (2018) Least-squares reverse time migration using generalised diffraction-stack imaging condition. In: UNSPECIFIED.

Murugiah, P.S. and Oh, P.C. and Lau, K.K. (2018) Facilitated transport graphene oxide based PPOdm mixed matrix membrane for CO2 separation. In: UNSPECIFIED.

Md Radzi, M.R. and Azizan, M.T. and Daud, N.F.D.M. and Topek, M.A. and Abidin, S.Z. (2018) Aqueous phase reforming of sorbitol over Ca doped Ni/Al2O3 for value-added chemicals production. In: UNSPECIFIED.

Mohd Anuar, N. and Hashim, A.M. and Awang, N.A. and Abd Hamid, M.R. (2018) Historical storm surges: Consequences on coastal resources and shoreline protection in the east coast of peninsular Malaysia. In: UNSPECIFIED.

N

Nashed, O. and Youssouf, S.M. and Sabil, K.M. and Shariff, A.M. and Sufian, S. and Lal, B. (2018) Investigating the effect of silver nanoparticles on carbon dioxide hydrates formation. In: UNSPECIFIED.

Negash, B.M. and Tufa, L.D. and Ramasamy, M. (2018) System identification based proxy modeling of a reservoir under iWAG. In: UNSPECIFIED.

Nazri, S.R.B. and Liu, W.-W. and Khe, C.-S. and Hidayah, N.M.S. and Teoh, Y.-P. and Voon, C.H. and Lee, H.C. and Adelyn, P.Y.P. (2018) Synthesis, characterization and study of graphene oxide. In: UNSPECIFIED.

Nurhanim, K. and Elamvazuthi, I. and Izhar, L.I. (2018) Ensemble Methods for Classifying of Human Activity Recognition. In: UNSPECIFIED.

Nasir, K. and Khan, M. and Chandio, T.A. and Bashir, Y. (2018) Comparative Analysis of Essential and Toxic Elements in Water and Blood Samples of Kidney Patients in Quetta, Pakistan. In: UNSPECIFIED.

Negim, E.-S. and Bekbayeva, L. and Adam, H. and Yeligbayeva, G. and Ganjian, E. and Saleh, M. and Saad, B. (2018) The effect of blend ratios on physico-mechanical properties and miscibility of cross-linked poly(vinyl alcohol)/urea blends. In: UNSPECIFIED.

Nik Ibrahim, N.H. and Ibrahim, A.R. and Mat, I. and Harun, A.N. and Witjaksono, G. (2018) LoRaWAN in Climate Monitoring in Advance Precision Agriculture System. In: UNSPECIFIED.

Nugroho, Y.D.H. and Pramudita, B.A. and Wibirama, S. and Izhar, L.I. and Setiawan, N.A. (2018) EEG Motor Imagery Signal Classification Using Firefly Support Vector Machine. In: UNSPECIFIED.

Nasif, M.S. and Samsudin, A.F.S.M. and Ismail, F.B. and Lim, D.C. (2018) Numerical investigation on the utilization of phase change material (PCM) to reduce building's HVAC energy consumption. In: UNSPECIFIED.

Nadhari, W.N.A.W. and Ramlan, N.A. and Mohammed, S.E. and Munir, S. and Zainal, Z.E.Z. and Firmansyah, F. and Aziz, A.A. and Heikal, M.R. (2018) Performance characteristics of free piston linear generator on different equivalence ratio. In: UNSPECIFIED.

Niazi, U.M. and Nasif, M.S. and Muhammad, M.B. and Imran, M. (2018) Integrated Consequence Modelling for Fire Radiation and Combustion Product Toxicity in offshore Petroleum Platform using Risk Based Approach. In: UNSPECIFIED.

Naz, M.Y. and Sulaiman, S.A. and Ismail, N.I. and Inayat, M. and Shukrullah, S. and Ghaffar, A. (2018) Study of Impact Erosion of Oil and Gas Flowlines with Micro-sized Sand Particles. In: UNSPECIFIED.

Nor, M.F.M. and Hassan, S. and Said, M.A. and Aris, M.S. (2018) Investigation of Fuel Characterisation of Waste Sludge from Sewage Treatment Plants (STP). In: UNSPECIFIED.

Niazi, U.M. and Nasif, M.S. and Muhammad, M.B. and Imran, M. (2018) A Parametric Study to Investigate Human Injury and Fatality due to Vapor Cloud Explosion. In: UNSPECIFIED.

Nikbakht, E. and Gaspar, H.A.D.C. and Jaradah, R.M. and Sutanto, M.H. (2018) Investigation on the Influence of Type of Steel Fibers on Shear Failure of HPFRCC Beams. In: UNSPECIFIED.

Ngui, J.Q. and Ghosh, D.P. and bin Wan Yusoff, W.I. (2018) Seismic Geomorphological Analysis of Late Miocene Sequences, Offshore Sabah Basin. In: UNSPECIFIED.

Nazir, L.S.M. and Yeong, Y.F. and Chew, T.L. and Ahmadon, A. (2018) The effect of zeolite suspension concentration on the formation of seed layer via vacuum seeding prior to NaX zeolite membranes growth. In: UNSPECIFIED.

Norizan, N.A.M. and Taib, S.M. and Zakaria, N. (2018) E-internship system with genetic algorithm. In: UNSPECIFIED.

Nor, N.H.M. and Aziz, I.A. and Rashid, N.A. (2018) Prediction of Lifetime Digital Heat Exchanger using Life Cycle Cost Analysis (LCCA). In: UNSPECIFIED.

Nu'Aim, M.N. and Bustam, M.A. (2018) Toxicity prediction of ionic liquids based on Daphnia magna by using density functional theory. In: UNSPECIFIED.

Nawi, N.I.M. and Bilad, M.R. and Nordin, N.A.H.M. (2018) Effect of dope solution temperature on the membrane structure and membrane distillation performance. In: UNSPECIFIED.

Narahari, M. (2018) Unsteady free convection flow past a semi-infinite vertical plate with constant heat flux in water based nanofluids. In: UNSPECIFIED.

Nia, E.M. and Zawawi, N.A.W.A. and Singh, B.S.M. (2018) A review of walking energy harvesting using piezoelectric materials. In: UNSPECIFIED.

Ngo, T.N. and Peng, D.-J. and Pao, W. and Ya, H. and Rohaizad, M.N. (2018) Investigation on erosion due to fine particles in multiphase flow. In: UNSPECIFIED.

Nikbakht, E. and Al-Nini, A. and Dahi, S.M. and Mahzabin, S. (2018) Lateral behaviour of PT segmental bridge columns with Ultra High Strength Concrete (UHSC). In: UNSPECIFIED.

O

Othman, N.A. and Zabiri, H. and Tufa, L.D. (2018) Dynamic simulation and control of feed conditioning system for CO 2 capture. In: UNSPECIFIED.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. and Vitra Paputungan, I. (2018) Simulation Study of Dye Solar Cell with TiO 2 Nanoparticles/Aggregates Composite for Improved Performance. In: UNSPECIFIED.

Oni, J.-O. and Hussin, F.A. and Zakaria, N. (2018) Fine-Grained Overhead Analysis Utilizing Atomic Instructions for Cross-ISA Dynamic Binary Translation on Multicore Processor. In: UNSPECIFIED.

Osman, A.B. and Ovinis, M. and Ismael, M.A. and Fakhruldin, M.H. and Faye, I. (2018) Color-based oil spill image segmentation. In: UNSPECIFIED.

Ovinis, M. and Karuppanan, S. and Sulaiman, S.A. and Melor, P.S. and Paiz, M.Z. and Urquia, A. (2018) A Comparative Analysis of Attainment of Program Outcomes for Courses with and without the Use of Modern Tools. In: UNSPECIFIED.

Owolabi, A.L. and Megat-Yusoff, P.S.M. and Amir, N. and Jasmani, M.S. and Syed Ahmad Ghazali, S.M.A. (2018) Effect of Grain Boundary Formation in Microstructural Changes in IN 738 Service Exposed Turbine Blade. In: UNSPECIFIED.

Othman, I. and Hashim, Z. and Mohamad, H. and Napiah, M. (2018) The Framework for Effective Human Resource Management at Construction Site. In: UNSPECIFIED.

Othman, I. and Azlam, M.H. and Mohamad, H. and Shafiq, N. and Napiah, M. (2018) Identification of Good China Steel Manufacturer for Industry. In: UNSPECIFIED.

Othman, I. and Majid, R. and Mohamad, H. and Shafiq, N. and Napiah, M. (2018) Variety of Accident Causes in Construction Industry. In: UNSPECIFIED.

Othman, I. and Ghani, S.N. and Mohamad, H. and Alalou, W. and Shafiq, N. (2018) Early Warning Signs of Project Failure. In: UNSPECIFIED.

Othman, I. and Harahap, M.I.P. and Mohamad, H. and Shafiq, N. and Napiah, M. (2018) Development of BIM-Based Safety Management Model Focusing on Safety Rule Violations. In: UNSPECIFIED.

Othman, I. and Ibrahim, M.F.H. and Shafiq, N. and Mohamad, H. and Kamil, M.S. (2018) HSE Management System for Hotwork Operation at High Elevation in Shipbuilding Project. In: UNSPECIFIED.

Othman, A.R. and Hussin, H. and Mustapha, M. and Parman, S. (2018) Cross-Disciplinary Team Learning in Engineering Project-Based: Challenges in Collaborative Learning. In: UNSPECIFIED.

Osman, M.A.M. and Kamaruddin, B. and Ramasamy, M. (2018) Optimality and Stability of Cooperative Distributed Model Predictive Control in Large-scale Plant. In: UNSPECIFIED.

Omar, M. and Ibrahim, R. and Abdullah, M.F. and Tarik, M.H.M. (2018) Modelling and System Identification of Gas Fuel Valves in Rowen's Model for Dry Low Emission Gas Turbine. In: UNSPECIFIED.

Othman, I. and Shafiq, N. and Nuruddin, M.F. (2018) Quality planning in Construction Project. In: UNSPECIFIED.

Othman, I. and Shafiq, N. and Nuruddin, M.F. (2018) Time Overrun in Construction Project. In: UNSPECIFIED.

Othman, I. and Shafiq, N. and Nuruddin, M.F. (2018) Effective Safety Management in Construction Project. In: UNSPECIFIED.

P

Pransisco, P. and Balbir, S. and Shuaib, M. and Joseph, E. (2018) Microstructure Investigation of Polyaniline (PANI) Conductive Polymer Synthesized through Chemical Polymerization. In: UNSPECIFIED.

Porwal, P. and Pachade, S. and Kadethankar, A. and Joshi, A. and Patwardhan, V. and Kamble, R. and Kokare, M. and Meriaudeau, F. (2018) Automatic Segmentation of Optic Disc by Gradient Minimization Based Approach. In: UNSPECIFIED.

Paramaguru, D. and Pedapati, S.R. and Awang, M. (2018) Microstructural analysis on underwater friction stir welded 5052 aluminium alloy. In: UNSPECIFIED.

Puspitasari, D. and Rabie, F.K.H. and Ginta, T.L. and Kurnia, J.C. and Mustapha, M. (2018) The Influence of Temperature on Stability of Aluminum Foam Cell Wall during Foaming Process. In: UNSPECIFIED.

Phung, Y.C. and Dominic, P.D.D. and Ahmad, R. (2018) Analysis of Learning Preferences and Learning Styles for an Undergraduate Teaching Unit. In: UNSPECIFIED.

Puspitasari, P. and Dewi Izzatus, T. and Achyarsyah, M. and Bandanajaya, B. and Puspitasari, D. (2018) Multistage artificial aging optimization for tensile properties of Duralium using Response Surface Method (RSM). In: UNSPECIFIED.

Pasra, M. and Ramli, M.I. and Dharmowijoyo, D.E. (2018) Car Ownership of Households in Sub-Urban Area in Makassar City. In: UNSPECIFIED.

Pereira, E.J. and Teh, H.M. and Manoharan, L.S. and Lim, C.H. (2018) Design Optimization of a Porous Box-Type Breakwater Subjected to Regular Waves. In: UNSPECIFIED.

Perdomo, O. and Otalora, S. and Gonzalez, F.A. and Meriaudeau, F. and Muller, H. (2018) OCT-NET: A convolutional network for automatic classification of normal and diabetic macular edema using sd-oct volumes. In: UNSPECIFIED.

Pao, W. and Sam, B. and Saieed, A. and Tran, C.M. (2018) Numerical Investigation of Liquid Carryover in T-Junction with Different Diameter Ratios. In: UNSPECIFIED.

Purnomo, E.W. (2018) Investigation of LCRC reservoir using multicomponent seismic data and low gas saturation model. In: UNSPECIFIED.

Purnomo, E.W. and Ghosh, D.P. (2018) Identifying shallow water flow in offshore Malaysia using multicomponent data and FWI approach. In: UNSPECIFIED.

Pratama, E. and Ismail, M.S. and Ridha, S. (2018) Development of a predictive model for enhanced gas recovery by CO2 huff-n-puff in depleted carbonate gas reservoirs. In: UNSPECIFIED.

Paramaguru, D. and Pedapati, S.R. and Awang, M. and Mohebbi, H. (2018) Mathematical model to predict tensile strength of underwater friction stir welded (UFSW) on 5052 aluminium alloys. In: UNSPECIFIED.

Q

Qasim, A. and Shariff, A.M. and Sufian, S. and Ayoub, M. and Lal, B. (2018) Phase identification of natural gas system with high CO 2 content through simulation approach using Peng-Robinson model. In: UNSPECIFIED.

Qayyum, J.A. and Altaf, K. and Rani, A.M.A. and Ahmad, F. and Qadir, H.A. and Amin, W. (2018) Metal Injection Molding Process Parameters as A Function of Filling Performance of 3D Printed Polymer Mold. In: UNSPECIFIED.

Qasim, S. and Kazmi, D. and Harahap, I.S.H. and Imran, M. and Sandhu, A.R. (2018) Probabilistic Assessment of Bored Pile Wall: A Slope Stabilisation Technique. In: UNSPECIFIED.

Qayyum, A. and Khan, M.K.A.A. and Mazher, M. and Suresh, M. (2018) Classification of EEG Learning and Resting States using 1D-Convolutional Neural Network for Cognitive Load Assesment. In: UNSPECIFIED.

R

Rosli, N.S.B. and Ibrahim, R.B. and Ismail, I. (2018) Application of principle component analysis in resolving influential factor subject to industrial motor failure. In: UNSPECIFIED.

Rosli, M.R. and Lam, M.K. and Kadir, W.N.A. and Uemura, Y. and Shuit, S.H. (2018) Utilizing Lipid-extracted Microalgae Residue for Removal of Methylene Blue from Aqueous Solution. In: UNSPECIFIED.

Rashid, T. and Murugesan, T. and Hussain, S. (2018) Optimization of multistage cross current extraction by iterative dynamic programming. In: UNSPECIFIED.

Rosli, N.S.B. and Ibrahim, R.B. and Ismail, I. and Bingi, K. (2018) Application of Principal Component Analysis vs. Multiple Linear Regression in Resolving Influential Factor Subject to Air Booster Compressor Motor Failure. In: UNSPECIFIED.

Rahim, N.F. and Othman, M. and Sokkalingam, R. (2018) A Comparative Review on Various Method of Forecasting Crude Palm Oil Prices. In: UNSPECIFIED.

Rab, N. and Chong, F.K. and Mohamed, H.I. and Lim, W.H. (2018) Preparation of TiO 2 nanoparticles by hydrolysis of TiCl 4 using water and glycerol solvent system. In: UNSPECIFIED.

Rahman, N.J.A. and Ramli, A. and Jumbri, K. and Uemura, Y. (2018) Influence of preparation methods on physicochemical properties of zirconia for transesterification of Nannochloropsis oculata microalga's oil. In: UNSPECIFIED.

Rahman, N.A. and Devi Wilfred, C. (2018) Removal of Mn(VII) from Industrial Wastewater by using Alginate-Poly(vinyl) alcohol as Absorbent. In: UNSPECIFIED.

Rizwan, M. and Dass, S.C. and Asirvadam, V.S. and Gill, B.S. and Sulaiman, L.H. (2018) DenMap: A Dengue Surveillance System for Malaysia. In: UNSPECIFIED.

Raja Shahrom, M.S. and Nordin, A.R. and Wilfred, C.D. (2018) Activated Carbon Supported Amine Functionalized Ionic Liquids for CO 2 Sorption. In: UNSPECIFIED.

Rameli, N. and Jumbri, K. and Wahab, R.A. and Ramli, A. and Huyop, F. (2018) Synthesis and characterization of mesoporous silica nanoparticles using ionic liquids as a template. In: UNSPECIFIED.

Roslee, M.F.I. and Ahmad, M.R. (2018) Development of Multi-Inputs Power Management Circuit for Hybrid Energy Harvester. In: UNSPECIFIED.

Roslan, R. and Nasif, M.S. and Al-Waked, R. (2018) CFD simulation of liquid-to-air membrane energy exchangers (LAMEE): Flat plate exchanger effectiveness. In: UNSPECIFIED.

Rebecca, L.W.X. and Saheed, M.S.M. and Saheed, M.S.M. and Burhanudin, Z.A. (2018) Formation of quasi-2D layered crystallite using long chain halide to form hybrid perovskite film. In: UNSPECIFIED.

Rahmawati, R. and Bilad, M.R. and Nordin, N.A.H.M. (2018) Advanced Aeration Using Finned Panel Spacer for Fouling Control in Produced Water Membrane Filtration. In: UNSPECIFIED.

Romlie, M.F. and Lau, K. and Zainol, M.Z. and Abdullah, M.F. and Kannan, R. (2018) Performance of Inductive Coupled Power Transfer Versus the Coil Shape - Investigation using Finite Element Analysis. In: UNSPECIFIED.

Rahman, H.A. and Shah Riman, N.I. and Abdullah, M.F. and Sakidin, H. and Romlie, M.F. and Nor, N.M. (2018) Neutral Earthing Reactance Design in Mitigating Third Harmonic Current at the Generator Neutral. In: UNSPECIFIED.

Rehman, M. and Baharudin, Z. and Nallagownden, P. and Islam, B.U. (2018) Design and Analysis of Resonant Wireless Power Transfer System. In: UNSPECIFIED.

Rahman, Z.H.A. and Khir, M.H.M. and Zakariya, M.A. (2018) Tip deflection of a thermal bimorph cantilever beam with different geometrical structures. In: UNSPECIFIED.

Rosli, S.-S. and Lim, J.-W. and Uemura, Y. and Lam, M.-K. and Isa, M.H. and Oh, W.-D. and Sakidin, H. (2018) PH optimization to promote attached growth of microalgae biomass onto polyurethane foam material. In: UNSPECIFIED.

Rahim, A.H.A. and Yunus, N.M. and Man, Z. and Sarwono, A. and Hamzah, W.S.W. and Wilfred, C.D. (2018) Ultrasonic assisted dissolution of bamboo biomass using ether-functionalized ionic liquid. In: UNSPECIFIED.

Ramli, M.I. and Dharmowijoyo, D.E. (2018) Activity-Travel Behaviour, and Daily and Global Well-Being. In: UNSPECIFIED.

Raf'Ee, S.S. and Liew, M.S. and Zawawi, N.A. and Danyaro, K.U. (2018) A Structured Review on the Improvement of GBI-RNC. In: UNSPECIFIED.

Raf'Ee, S.S. and Liew, M.S. and Zawawi, N.A. and Danyaro, K.U. (2018) Thermal Insulation of Residential Construction through the Study of Temperature Difference of Bricks. In: UNSPECIFIED.

Romlie, M.F. and Bakar, Z.A. and Azman, N.A. (2018) An Innovative Approach of Using Mind Map to Support Active Learning for Engineering Students. In: UNSPECIFIED.

Ridhuan, M. and Abdullah, T.L. and Ahmad, R. and Yaacob, I.R. and Al Amin, M.N. and Amin, U.R. and Panaemalae, A.R. (2018) Inverted Classroom Implementation Model for Social-Science Course Subject Instruction among Undergraduate Engineering Students. In: UNSPECIFIED.

Rosli, N. and Aziz, I.A. and Mohd Jaafar, N.S. (2018) Home underground pipeline leakage alert system based on water pressure. In: UNSPECIFIED.

Radzi, S.S.M. and Asirvadam, V.S. and Hutapea, D.K.Y. and Dass, S.C. (2018) Comparison of EEG signals during alert and sleep inertia states using fractal dimension. In: UNSPECIFIED.

Ridha, S. and Ibrahim, A. and Shahari, R. and Fonna, S. (2018) Graphene nanoplatelets as high-performance filtration control material in water-based drilling fluids. In: UNSPECIFIED.

Ratnam, T.C. and Ghosh, D.P. and Negash, B.M. (2018) The integration of elastic wave properties and machine learning for the distribution of petrophysical properties in reservoir modeling. In: UNSPECIFIED.

Razak, M.A. and Rani, A.M.A. and Saad, N.M. and Littlefair, G. and Aliyu, A.A. (2018) Controlling corrosion rate of Magnesium alloy using powder mixed electrical discharge machining. In: UNSPECIFIED.

Ridha, S. and Abd Hamid, A.I. and Abdul Halim, A.H. and Zamzuri, N.A. (2018) Elasticity and expansion test performance of geopolymer as oil well cement. In: UNSPECIFIED.

Rudini and Matori, A.N. and Ab Talib, J. and Balogun, A.-L. (2018) Application of Geographic Information System (GIS) to Model the Hydrocarbon Migration: Case Study from North-East Malay Basin, Malaysia. In: UNSPECIFIED.

Razak, Z.A. and Sha'ari, F.A.-Z. and Liew, S. (2018) Earthquake analysis requirement for fixed Offshore Structures, Offshore Malaysia. In: UNSPECIFIED.

Razavi Setvati, M. and Mustaffa, Z. and Kim, D. (2018) Fracture analysis of single-edge cracked tubular steel beam rehabilitated by CFRP sheets. In: UNSPECIFIED.

S

Singh, G. and Shamsuddin, M.R. and Aqsha and Lim, S.W. (2018) Characterization of Chicken Manure from Manjung Region. In: UNSPECIFIED.

Shafiq, U. and Shariff, A.M. and Babar, M. and Ali, A. (2018) A study on blowdown of pressurized vessel containing CO 2 /N 2 /H 2 S at cryogenic conditions. In: UNSPECIFIED.

Shariff, A.M. and Athar, M. and Buang, A. and Khan, M.I. and Hermansyah, H. (2018) Distillation column inherent safety index at preliminary design stage. In: UNSPECIFIED.

Shah, M.U.H. and Sivapragasam, M. and Moniruzzaman, M. and Talukder, M.M.R. and Yusup, S.B. (2018) Investigation of choline based ionic liquids as an oil spill dispersant. In: UNSPECIFIED.

Salleh, N.F. and Ishak, N. and Ruslan, M.S.H. and Mandal, P.C. and Yusup, S. (2018) Fundamental studies on extraction of vanadyl oxide tetraphenyl porphyrin (VO TPP) presence in heavy oil model using toluene assisted ionic liquids. In: UNSPECIFIED.

Siyal, A.A. and Rashid Shamsuddin, M. and Rabat, N.E. and Zulfiqar, M. and Ayoub, M. and Azizli, K.A. (2018) Removal of anionic surfactant sodium dodecylbenzenesulfonate from water using fly ash adsorbent. In: UNSPECIFIED.

Sha'Rani, S.S. and Abouzari-Lotf, E. and Nasef, M.M. and Ahmad, A. and Ting, T.M. and Ali, R.R. (2018) Improved vanadium barrier properties of perfluorinated sulfonic acid membranes for vanadium redox flow battery. In: UNSPECIFIED.

Sang, W.Y. and Ching, O.P. and Keong, L.K. (2018) Synergistic effect of binary fillers (MCM-41/C20) hybrid membrane for CO 2 /CH 4 separation. In: UNSPECIFIED.

Safdar, R. and Omar, A.A. and Arunagiri, A. and Thanabalan, M. (2018) Synthesis and characterization of imidazolium ILs based chitosan-tripolyphosphate microparticles. In: UNSPECIFIED.

Singh, N. and Elamvazuthi, I. and Nallagownden, P. and Ramasamy, G. and Jangra, A. (2018) VOLTTRON based Multi-agent System for Residential Micro-grid. In: UNSPECIFIED.

Saeidi, T. and Ismail, I. and Wen, W.P. and Alhawari, A.R.H. (2018) UWB Transparent THz antenna for Medical Imaging and Satellite Communication Applications. In: UNSPECIFIED.

Saeidi, T. and Ismail, I. and Wen, W.P. and Alhawari, A.R.H. (2018) High Gain Dual-band Low-frequency Scaled Transparent THz Antenna for Satellite Systems. In: UNSPECIFIED.

Shukur, M.F. and Hamsan, M.H. and Kadir, M.F.Z. (2018) Plasticized and plasticizer free lithium acetate doped polyvinyl alcohol-chitosan blend solid polymer electrolytes: Comparative studies. In: UNSPECIFIED.

Soleimani, H. and Ahmad Latiff, N.R. and Zaid, H.M. and Yahya, N. and Sadrolhosseini, A.R. and Adil, M. (2018) Effect of synthesis parameters on cobalt ferrite saturation magnetization. In: UNSPECIFIED.

Sadrolhosseini, A.R. and Rashid, S.A. and Soleimani, H. and Shafie, S. and Noor, A.S.M. and Mohammadi, A. (2018) Application of Surface Plasmon Resonance Sensor with Polypyrrole Chitosan Graphene Oxide layer to Detect the Napropamide. In: UNSPECIFIED.

Singa, P.K. and Isa, M.H. and Ho, Y.-C. and Lim, J.-W. (2018) Mineralization of Hazardous Waste Landfill Leachate using Photo-Fenton Process. In: UNSPECIFIED.

Safarjalani, R. and Sidibe, D. and Ainouz, S. and Shahin, A. and Meriaudeau, F. (2018) Diabetic Retinal Tomographical Image Classification Using Convolutionnal Neural Network. In: UNSPECIFIED.

Subhani, N. and Kannan, R. and Romlie, M.F. (2018) Modified Topology of Z-Source Inverter by Switched Inductor with Series Impedance Network. In: UNSPECIFIED.

Shahidi, M.I. and Zakariya, M.A. and Witjaksono, G. and Nor, N.M. and M Khir, M.H. and Khairuddin, A.S. and Yahya, N. and M Noor, M.F. and A Fadzil, M.F. (2018) Design and Performance Analysis of High Gain Yagi Shaped Patch Antenna for Wi-Fi Application. In: UNSPECIFIED.

Singh, N. and Lakhina, U. and Elamvazuthi, I. and Jangra, A. and Singh, A.K. (2018) Biomedical Data Privacy Enhancement Architecture Based on Multi-Keyword Search Technique. In: UNSPECIFIED.

Salman, M.S.B.M. and Karsiti, M.N.B. and Rozly-Azni, N.A.S.B. (2018) Dynamic Resource Allocation Strategy for Low Cost Smart Parking System. In: UNSPECIFIED.

Soomro, A.A. and Mokhtar, A.A. (2018) Prediction of performance parameters of stratified TES tank using artificial neural network. In: UNSPECIFIED.

Singh, V. and Jangra, A. and Parasuraman, S. and George, J. and Elamvazuthi, I. and Khan, M.K.A.A. (2018) Calcaneofibular Ligament Ultrasound Image Segmentation Based on Advanced Image Processing Techniques. In: UNSPECIFIED.

Sulaiman, S.A. and Razif, M.R.M. and Han, T.D. and Atnaw, S.M. and Tamili, S.N.A. (2018) Impact of Soiling Rate on Solar Photovoltaic Panel in Malaysia. In: UNSPECIFIED.

Sulaiman, S.A. and Moni, M.N.Z. and Tamili, S.N.A. (2018) Flow of Water-Oil Emulsion through an Orifice. In: UNSPECIFIED.

Soomro, A.A. and Mokhtar, A.A. and Akbar, A. and Abbasi, A. (2018) Modelling Techniques Used in the Analysis of Stratified Thermal Energy Storage: A Review. In: UNSPECIFIED.

Shamshirgaran, S.R. and Al-Kayiem, H.H. and Assadi, M.K. and Sharma, K.V. (2018) Suitability of base liquid in a nanofluid-laden solar flat-plate collector with emphasize on bioglycol. In: UNSPECIFIED.

Sidik, M.H.I. and Amir, N. and Kamal, S. (2018) Wear Mechanism of Wear Resistant HVOF Thermal Spray Coating: Chromium Carbide Nickel Chrome on 304 AISI Steel. In: UNSPECIFIED.

Sakidin, H. and Nor, M.F.M. and Hassan, S. and Basrawi, F. and Ahmad, A. and Rahman, I. (2018) Development of Solar Powered Buggy Charging Station. In: UNSPECIFIED.

Syalsabila, A. and Maulud, A.S. and Nordin, N.A.H.M. and Suleman, H. (2018) VLE of carbon dioxide loaded aqueous potassium lysinate with separate blends of piperazine and 2-amino-2-methyl-1-propanol. In: UNSPECIFIED.

Saed, K.A. and Aziz, N. and Ramadhani, A.W. and Hafizah Hassan, N. (2018) Data Governance Cloud Security Assessment at Data Center. In: UNSPECIFIED.

Savita, K.S. and Luqmanulhakim and Muniandy, M. and Mathiyazhagan, K. (2018) Smart Event Management Waste Bin. In: UNSPECIFIED.

Salim, W.S.W. and Liew, M.S. and Shafie, A. (2018) An evaluation of the outcomes probabilities of roadway bridge defect model using Event Tree method. In: UNSPECIFIED.

Sofian, N.M. and Hashim, A.S. and Ahmad, W.F.W. (2018) A review on usability guidelines for designing mobile apps user interface for children with autism. In: UNSPECIFIED.

Salihi, I.U. and Kutty, S.R.M. and Ismail, H.H.M. (2018) Copper Metal Removal using Sludge Activated Carbon Derived from Wastewater Treatment Sludge. In: UNSPECIFIED.

Sutanto, M. and Bala, N. and Al Chodri, F. and Sunarjono, S. (2018) Effect of Hydrated Lime and Portland Cement on Asphalt Binders using DSR. In: UNSPECIFIED.

Sutanto, M. and Bala, N. and Al Zaro, K. and Sunarjono, S. (2018) Properties of Crumb Rubber and Latex Modified Asphalt Binders using Superpave Tests. In: UNSPECIFIED.

Shah, S.M.H. and Mustaffa, Z. and Kim, D.K. and Yusof, K.W. (2018) Instability Criteria for Vehicles in Motion Exposed to Flood Risks. In: UNSPECIFIED.

Sivapalan, S. and Afsharian, A. and Shafiq, N. and Nuruddin, F.B. and Sivapalan, M. (2018) Communicating Sustainability: Context Matters. In: UNSPECIFIED.

Shukla, S. and Hassan, M.F. and Jung, L.T. and Awang, A. (2018) Fuzzy-based Fog Computing for Real-Time Data Transmission in Healthcare Internet-of-Things. In: UNSPECIFIED.

Savita, K.S. and Razip, M.M. and Mehat, M. and Muniandy, M. (2018) Bluetooth drawer (BD) lock system for student's residential. In: UNSPECIFIED.

Setiawan, L.F. and Witjaksono, G. and Ahmed, A.Y. (2018) Modeling and Simulation of Thermally Actuated MEMS Resonators for Gas Sensing Applications. In: UNSPECIFIED.

Savita, K.S. and Marrima, J.J.D.A. and Muniandy, M. and Abidin, A.I.Z. and Taib, S.M. (2018) Help Me MyDem Application for Early Stage Dementia Patients. In: UNSPECIFIED.

Savita, K.S. and Hasbullah, N.A. and Taib, S.M. and Abidin, A.I.Z. and Muniandy, M. (2018) How's the Turnout to the Class? A Face Detection System for Universities. In: UNSPECIFIED.

Sakai, H. and Nakata, M. and Watada, J. (2018) A model of rule generation handling granules defined by implications in table data sets. In: UNSPECIFIED.

Sathasivam, L. and Elamvazuthi, I. and Khan, M.K.A.A. and Parasuraman, S. (2018) Tuning A Three-Phase Separator Level Controller via Particle Swarm OptimizationAlgorithm. In: UNSPECIFIED.

Sheikh, M.A. and Saad, N.R. and Mohd Nor, N.B. and Tahir Rakhsh, S. and Irfan, M. (2018) An Unsupervised Automated Method to Diagnose Industrial Motors Faults. In: UNSPECIFIED.

Shoieba, M.A. and Sum, C.W. and Abidin, N.S.Z. and Bhattachary, S.K. (2018) The organic geochemical characterization: An indication of type of kerogen and maturity of early - Mid Jurassic shale in the Blue Nile formation. In: UNSPECIFIED.

Sallih, N. and Lescher, P. and Bhattacharyya, D. (2018) Flatwise Compressive Properties of Kenaf/Polypropylene Honeycomb Core. In: UNSPECIFIED.

Samsuri, S. and Amran, N.A. and Jusoh, M. (2018) Optimization of Progressive Freeze Concentration on Apple Juice via Response Surface Methodology. In: UNSPECIFIED.

Setiawan, J.D. and Baharom, M.B. and Bin Abdul Wali, M.A. (2018) Development of force feedback in steering systems for virtual driving simulator. In: UNSPECIFIED.

Salaam, H.A. and Taha, Z. and Tuan Ya, T. (2018) Multi Objective Optimization Using Genetic Algorithm of a Pneumatic Connector. In: UNSPECIFIED.

Singa, P.K. and Isa, M.H. and Ho, Y.-C. and Lim, J.-W. (2018) Treatment of hazardous waste landfill leachate using Fenton oxidation process. In: UNSPECIFIED.

Sukeri, M. and Paiz Ismadi, M.Z. and Othman, A.R. and Kamaruddin, S. (2018) Wear Detection of Drill Bit by Image-based Technique. In: UNSPECIFIED.

Shahrestani, S. and Ismail, M.C. and Kakooei, S. and Beheshti, M. and Zabihiazadboni, M. and Zavareh, M.A. (2018) Iridium Oxide pH Sensor Based on Stainless Steel Wire for pH Mapping on Metal Surface. In: UNSPECIFIED.

Setiaji, H. and Paputungan, I.V. (2018) Design of Telegram Bots for Campus Information Sharing. In: UNSPECIFIED.

Savita, K.S. and Razip, M.M. and Kalid, K.S. and Mathiyazhagan, K. (2018) Impact of IoT towards environmental sustainability in Malaysia. In: UNSPECIFIED.

Sedaralit, M.F. and Saaid, I.M. and Awang, M. (2018) Design and evaluation of in-situ chemical regeneration of foam for enhanced oil recovery EOR, 1D foam modelling-Malaysia's Offshore Oilfield. In: UNSPECIFIED.

Sambo, C.H. and Hermana, M. and Babasari, A. and Janjuhah, H.T. and Ghosh, D.P. (2018) Application of artificial intelligence methods for predicting water saturation from new seismic attributes. In: UNSPECIFIED.

Subhani, N. and Kannan, R. and Romlie, M.F. (2018) Steady state performance analysis of one switched inductor series Z-source inverter. In: UNSPECIFIED.

Sulaiman, S.S. and Mohd Nor, N. and Haji Baharudin, Z. and Ismail, I. and Baharudin, N. and Sidek, H. (2018) Smart energy meter using telegram bot. In: UNSPECIFIED.

Shah, S.Y. and Wolf, K.-H. and Pilus, R.M. and Rossen, W.R. (2018) Foam generation by capillary snap-off in flow across a sharp permeability transition. In: UNSPECIFIED.

T

Tai, M.J.-Y. and Liu, W.-W. and Khe, C.-S. and Hidayah, N.M.S. and Teoh, Y.-P. and Voon, C.H. and Lee, H.C. and Adelyn, P.Y.P. (2018) Green synthesis of reduced graphene oxide using green tea extract. In: UNSPECIFIED.

Tarmizi, I.A. and Aziz, A.A. (2018) Vehicle Detection Using Convolutional Neural Network for Autonomous Vehicles. In: UNSPECIFIED.

Tamili, S.N.A. and Aziz, A.R.A. and Sulaiman, S.A. and Zainal, E.Z. and Firmansyah and Heikal, M.R. (2018) A review on free piston linear engine (FPLE). In: UNSPECIFIED.

Tran, M. and Memon, Z. and Pao, W. and Hashim, F.M. (2018) Preliminary Results of Numerical Simulation of Slug Flow in a Regular T-Junction. In: UNSPECIFIED.

Tamili, N. and Chuan, L.K. and Sulaiman, S.A. and Moni, M.N.Z. and Inayat, M. and Lo, M.Y.K. (2018) Effect of Grass and Coconut Shell Blending Ratio on the Performance of Syngas. In: UNSPECIFIED.

Tamili, N. and Chuan, L.K. and Sulaiman, S.A. and Moni, M.N.Z. and Inayat, M. and Lo, M.Y.K. (2018) Co-Gasification of Corn and Coconut Residues in Downdraft Gasifier. In: UNSPECIFIED.

Tahan, M. and Tamiru, A.L. and Muhammad, M. (2018) Design optimization of industrial gas turbines using simulated annealing algorithms. In: UNSPECIFIED.

Thiyagu, A. and Indragandhi, V. and Kannan, R. (2018) Mathematical Modelling of High Voltage Gain Converter Using P and O for PV Based Application. In: UNSPECIFIED.

Tang, T.B. and Chan, Y.L. (2018) Functional Connectivity Analysis on Mild Alzheimer's Disease, Mild Cognitive Impairment and Normal Aging using fNIRS. In: UNSPECIFIED.

Thangarasu, G. and Subramanian, K. and Dominic, P.D.D. (2018) An Integrated Architecture for Prediction of Heart Disease from the Medical Database. In: UNSPECIFIED.

Teoh, C.S. and Kamil Mahmood, A. and Dzazali, S. (2018) Cyber Security Challenges in Organisations: A Case Study in Malaysia. In: UNSPECIFIED.

Topa, A. and Kim, D.K. and Kim, Y. (2018) 3D Numerical Simulation of Seamless Pipe Piercing Process by Fluid-Structure Interaction Method. In: UNSPECIFIED.

Tarmizi, Z.I. and Nasef, M.M. and Nallappan, M.L. and Khairudin, N.B.A. and Ali, R.R. and Ahmad, A. (2018) Preparation and characterization of hydrophilic polyurethane scaffolds by electrospinning and radiation induced grafting of 2-hydroxyethylmethacrylate. In: UNSPECIFIED.

Tat, C.C. and Parasuraman, S. and Khan, M.K.A.A. and Elamvazuthi, I. (2018) Walking support system for Ageing Community. In: UNSPECIFIED.

Thalib, S. and Ikhsan, M. and Fonna, S. and Huzni, S. and Ridha, S. (2018) Identification of corrosion product on medium carbon steel under the exposure of Banda Aceh's atmosphere. In: UNSPECIFIED.

Tahir, T. and Hashim, A.M. and Yusof, K.W. (2018) Statistical downscaling of rainfall under transitional climate in Limbang River Basin by using SDSM. In: UNSPECIFIED.

Toloue, I. and Liew, M.S. and Harahap, I.S.H. and Lee, H.E. (2018) A novel approach to enhance the accuracy of vibration control of Frames. In: UNSPECIFIED.

Tachmammedov, S. and Hooi, Y.K. and Kalid, K.S. (2018) Automated multi-factor analytics for cheat-proofing attendance-taking. In: UNSPECIFIED.

Tarik, M.H.M. and Omar, M. and Abdullah, M.F. and Ibrahim, R. (2018) Optimization of neural network hyperparameters for gas turbine modelling using bayesian optimization. In: UNSPECIFIED.

Tan, L.S. and Shariff, A.M. and Lau, K.K. and Tsuji, T. (2018) Modification of effective surface area correlation for structured packed absorption column at elevated pressures. In: UNSPECIFIED.

U

Uemura, Y. and Sellappah, V. and Trinh, T.H. and Komiyama, M. and Hassan, S. and Tanoue, K. (2018) Improvement of energy density and energy yield of oil palm biomass by torrefaction in combustion gas. In: UNSPECIFIED.

Ullah, H. and Tahir, F.A. and Malik, A.S. and Cheema, H.M. (2018) A Wearable Radiometric Antenna for Non-Invasive Brain Temperature Monitoring. In: UNSPECIFIED.

Usman, F. and Dennis, J.O. and Meriaudeau, F. and Ayodele, O.B. (2018) Modelling and simulation of surface plasmon resonance breathe acetone sensor based on doped polyaniline-graphene composite. In: UNSPECIFIED.

Usman, A. and Sutanto, M.H. and Napiah, M. (2018) Effect of Recycled Plastic in Mortar and Concrete and the Application of Gamma Irradiation-A Review. In: UNSPECIFIED.

Ung, W.C. and Meriaudeau, F. and Tang, T.B. (2018) Optimizing Mental Workload by Functional Near-Infrared Spectroscopy Based Dynamic Difficulty Adjustment. In: UNSPECIFIED.

Utomo, C. and Suhartono and Rahmawati, Y. (2018) A Concept of Value and Sustainable Performance on Affordable High-Rise Residential Decision. In: UNSPECIFIED.

Usman, F. and Dennis, J.O. and Meriaudeau, F. (2018) Development of a surface plasmon resonance acetone sensor for noninvasive screening and monitoring of diabetes. In: UNSPECIFIED.

Ur Rehman, M.J. and Dass, S.C. and Asirvadam, V.S. (2018) A Bayesian parameter learning procedure for nonlinear dynamical systems via the ensemble Kalman filter. In: UNSPECIFIED.

Uthayakumar, M. and Balasubramanian, V. and Abdul Rani, A.M. and Hadzima, B. (2018) Effects of Welding on the Fatigue Behaviour of Commercial Aluminum AA-1100 Joints. In: UNSPECIFIED.

Uddin, M. and Romlie, M.F. and Abdullah, M.F. and Hassan, K.N.M. and Tan, C.K. and Bakar, A.H.A. (2018) Modeling of campus microgrid for off-grid application. In: UNSPECIFIED.

Uemura, Y. and Yee Han, F. and Tien Nguyen, T. and Hoai Trinh, T. and Kusakabe, K. (2018) Single-phase transesterification of palm oil in the presence of methylethylketone-a study on intrinsic reaction kinetics -. In: UNSPECIFIED.

Ul Hassan Shah, M. and Sivapragasam, M. and Moniruzzaman, M. and Mahabubur Rahman Talukder, M. and Bt Yusup, S. (2018) Dispersion of crude oil by choline based ionic liquids. In: UNSPECIFIED.

Uemura, Y. and Han, F.Y. and Nguyen, T.T. and Trinh, T.H. and Kusakabe, K. (2018) Estimation of Overall Transesterification Rate of Palm Oil in Oil- Methanol Two-Phase Reaction System-Does the Mass Transfer Matter? -. In: UNSPECIFIED.

V

Vijayakumaran, H. and Lemma, T.A. (2018) Simulation of swirling wet steam flow through a supersonic nozzle. In: UNSPECIFIED.

W

Wong, P.W. (2018) A Sustainable and Fast Approach to Filter Design for 5G Implementation. In: UNSPECIFIED.

Wahhab, H.A.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. and El-Adawy, M. (2018) Magneto-hydrodynamics of bubbly flow in horizontal pipe: New criteria through numerical simulation. In: UNSPECIFIED.

Why, E.S.K. and Ismail, F.B. and Hasini, H. and Nasif, M.S. (2018) CFD based investigation on effect of classifier blade length to coal particle distribution in coal pulverizer. In: UNSPECIFIED.

Woldeyohannes, A.D. and Woldemichael, D.E. (2018) Developing renewable energy alternative resources evaluation model based on multiple criteria. In: UNSPECIFIED.

Witjaksono, G. and Junaid, M. (2018) Analysis of Tunable Energy Band Gap of Graphene Layer. In: UNSPECIFIED.

Why, E. and Alnaimi, F. and Hasini, H. and Nasif, M. (2018) Computational Study of Coal Particle Distribution in Coal Pulverizer: Effect of Air Flow Rate and Coal Particle Flow Rate. In: UNSPECIFIED.

Wong, C.-Y. and Lim, J.-W. and Uemura, Y. and Chong, F.-K. and Yeong, Y.-F. and Mohamad, M. and Hermansyah, H. (2018) Insect-based lipid for biodiesel production. In: UNSPECIFIED.

Wahab, N.W.B.A. and Samsudin, M.F.R. and Sufian, S. and Shaharun, M.S. (2018) Development of the carbon nanofibers (CNFs) supported iron catalyst via deposition precipitation method. In: UNSPECIFIED.

Wong, E.W.C. and Choi, H.S. and Kim, D.K. and Hashim, F.M. (2018) Development of ANN Model for the Prediction of VIV Fatigue Damage of Top-tensioned Riser. In: UNSPECIFIED.

Woldemichael, D.E. (2018) A Hybrid Student-centered Learning Instructional Approaches for a Lecture Based Engineering Class. In: UNSPECIFIED.

Watada, J. and Yabuuchi, Y. (2018) Preface. In: UNSPECIFIED.

Witjaksono, G. and Saeed Rabih, A.A. and Yahya, N.B. and Alva, S. (2018) IOT for Agriculture: Food Quality and Safety. In: UNSPECIFIED.

Woen, E.L. and Malek, M.A. and Mohammed, B.S. and Chao-Wei, T. and Tamunif, M.T. (2018) Experimental study on compressive strength of sediment brick masonry. In: UNSPECIFIED.

Wei Yi, L. and Hamidi, R. and Ghosh, D. and Hermana, M. and Soleimani, H. and Musa, M.H. (2018) Application of empirical wavelet transform in coherent noise attenuation in high frequency marine seismic data. In: UNSPECIFIED.

Y

Yaqub, S. and Lal, B. and Mellon, N.B. and Sufian, S.B. (2018) Effect of the natural Green Materials on Methane Hydrate Formation Kinetics. In: UNSPECIFIED.

Yaakob, S.M. and Rabat, N.E. and Sufian, S. (2018) Effects of Na: Al and water: Solid ratios on the mechanical properties of fly ash based geopolymer. In: UNSPECIFIED.

Yaqub, M.W. and Pendyala, R. (2018) CFD simulations of gas-liquid-liquid three-phase co-current flow in horizontal pipe by tracking volume fractions using VOF model. In: UNSPECIFIED.

Yar, A. and Dennis, J.O. and Mohammed, N.M. and Ahmad, F. and Din, F.U. (2018) Optimization of Nickel Nano Structure Deposition in Alumina Template and Its Utilization as Supercapacitor Electrode. In: UNSPECIFIED.

Yuharmon, N.A.S. and Mohamed, N.M. and Chong, F.K. and Cheong, K.Y. (2018) Scanning electron microscopy of soxhlet extracted aloe vera gel for electrolyte application. In: UNSPECIFIED.

Ya, H.H. and Othman, M.F. and Pao, W. and Tran, N.N. and Khan, R. (2018) Simulation study on impact of fine sand particle to 90°steel elbow in pipe. In: UNSPECIFIED.

Yasir, M. and Amir, N.B. and Ahmad, F. and Afiq, A. and Baig, Z. (2018) Effect of dispersing agent on the thermal properties of basalt fibre reinforced intumescent coating. In: UNSPECIFIED.

Yassen, T.A. and Waes, M.M. and Ahmed, O.K. and Tahseen, T.A. and Baharom, M.B. (2018) Performance investigation on an integrated multi-stage cylindrical-tank solar water heater. In: UNSPECIFIED.

Ya, H.H. and Hafizzie, A. and Pao, W. and Hassan, S. and Khan, R. (2018) Experimental study on the impact of wet sand particle to the erosion of carbon steel and HDPE. In: UNSPECIFIED.

Yahia, K. and Kannan, R. and Yahaya, N.Z. and Asirvadam, V.S. (2018) Development of an Adaptive Controller for Gridconnected Power Electronic Converter. In: UNSPECIFIED.

Yin Ling, A.M. and Wan Ahmad, W.F. and Hashim, A.S. (2018) Readiness of Mobile Learning among Working Adults in Malaysia. In: UNSPECIFIED.

Yong, S.-P. and Yeong, Y.-C. (2018) Human Object Detection in Forest with Deep Learning based on Drone's Vision. In: UNSPECIFIED.

Yau, X.H. and Khe, C.S. and Mohamed Saheed, M.S. and Lai, C.W. (2018) Effect on the Formation of Magnetite Reduced Graphene Oxide with Controlled Stirring Duration. In: UNSPECIFIED.

Yunus, N.M.M. and Wilfred, C.D. and Man, Z. (2018) Characterization of asphaltenes from the middle east crude oil. In: UNSPECIFIED.

Yong, S.-P. and Chung, A.L.W. and Yeap, W.K. and Sallis, P. (2018) Motion Detection Using Drone's Vision. In: UNSPECIFIED.

Ying, G.L. and Elamvazuthi, I. and Khan, M.K.A.A. and Parasuraman, S. (2018) Development of EMG based Upper Arm Exoskeleton. In: UNSPECIFIED.

Yousufi, M.M. and Elhaj, M.E.M. and Moniruzzaman, M. (2018) Comparative Analysis of Corrosion Inhibition: Between Jatrophacurcas, Palm and Diesel Oil based Emulsified Acids for Acid Stimulation Operations. In: UNSPECIFIED.

Yusof, N.Z. and Samsuddin, N.S. and Hanif, M.F. and Syed Osman, S.B. (2018) Peat soils stabilization using Effective Microorganisms (EM). In: UNSPECIFIED.

Yin, C.J. and Murad, S.A.Z. and Harun, A. and Ramli, M.M. and Zulkifli, T.Z.A. and Karim, J. (2018) A Low Power 2.4 GHz CMOS Mixer Using Forward Body Bias Technique for Wireless Sensor Network. In: UNSPECIFIED.

Ya, H.H. and Luthfi, H. and Ngo, N.-T. and Hassan, S. and Pao, W. (2018) A Preliminary Experimental Investigation of Wet Fine Erosion in Two-Phase Flow. In: UNSPECIFIED.

Yong, H.Y. and Liew, M.S. and Ovinis, M. and Danyaro, K.U. and Lim, E.S. (2018) Hydrodynamic study of free standing drilling risers under typhoon generated swell. In: UNSPECIFIED.

Yusoff, W.I.W. and Adha, K. and Hanapiah, N.M. and Ghosh, D.P. (2018) Major controlling factors of overpressure generation in West Baram Delta, Offshore Sarawak Basin: An overview on disequlibirum compaction and thermal analysis causing overpressure interval. In: UNSPECIFIED.

Yen, L.H. and Kamaruddin, S. and Ismadi, Z.P. and Prakash, J. and Mehat, N.M. (2018) Impact of capacity loss factors in front-of-line IC packaging on production performance: A case study. In: UNSPECIFIED.

Z

Zainal, S.A. and Daud, W.R. and Putra, Z.A. and Nor, N. (2018) Integrated constraints optimization for surface and sub-surface towards CAPEX free maximizing production. In: UNSPECIFIED.

Zaini, D. and Khan, M.I. and Shariff, A.M. and Athar, M. and Shamim, M.Y. (2018) Effect of the Density and the Refractive Index on the Toxicity of Imidazolium Ionic Liquids: A study of Ionic Interactions. In: UNSPECIFIED.

Zulkifli, A.F. and Ramli, A. and Lim, J.W. and Lam, M.K. (2018) Effect of NaNO 3 and NaCl concentration on Nannochloropsis oculata cell biomass and FAME composition for biodiesel production. In: UNSPECIFIED.

Zulkifili, N.H. and Sutanto, M.H. (2018) The Influence of Bonding between Layers on Pavement Performance, a Case Study of Malaysian Road. In: UNSPECIFIED.

Zakariya, M.A. and Shahidi, M.I. and Sanmugan, L. and Witjaksono, G. and Nor, N.M. and Khir, M.M.H. and Khairuddin, A.S. and Yahya, N. and Fadzil, F.A. and Nor, M.M.F. (2018) The Development of Dual Band DRA Hybrid Antenna. In: UNSPECIFIED.

Zahari, M.K. and Shairi, N.A. and Ahmad, B.H. and Zakaria, Z. and Wong, P.W. (2018) Miniaturized Switchable Bandpass to Matched Bandstop Filter Using Stepped-Impedance Resonator. In: UNSPECIFIED.

Zhang, X. and Aoki, H. and Majid, M.A.A. and Hassan, Z. and Karim, Z.A.A. and Muhammad, M. (2018) Experiences and lessons from an anomaly root cause analysis in a large district cooling plant. In: UNSPECIFIED.

Zulkepli, A. and Chand, M.R.R. and Ibrahim, T.K. and Sakidin, H. and Basrawi, F. and Yusof, M.H. (2018) Performance analysis of a Copper Indium Gallium Selenide (CIGS) based Photovoltaic Thermal (PV/T) water collector. In: UNSPECIFIED.

Zhang, H. and Watada, J. (2018) A Fuzzy Index Tracking Multi-Objective Approach to Stock Data Analytics. In: UNSPECIFIED.

Zaffar, M. and Hashmani, M.A. and Savita, K.S. (2018) A Study of Prediction Models for Students Enrolled in Programming Subjects. In: UNSPECIFIED.

Zamin, N. and Ab Rahim, H. and Savita, K.S. and Bhattacharyya, E. and Zaffar, M. and Katijah Mohd Jamil, S.N. (2018) Learning Block Programming using Scratch among School Children in Malaysia and Australia: An Exploratory Study. In: UNSPECIFIED.

Zulkafli, A.Z. and Basri, S. and Ahmad, R. and Imam, A.B. (2018) Image synchronization gateway for NoSQL document database and server-side SQL database in mobile environment. In: UNSPECIFIED.

Zaid, H.M. and Zainuddin, A. (2018) A Study on Foundation Students' Misconceptions in Projectile motion and free fall. In: UNSPECIFIED.

Zainal Abidin, A.I. and Fadzil, F.A. and Peh, Y.S. (2018) Micro-controller based fertilizer dispenser control system. In: UNSPECIFIED.

Zainuddin, R. and Jaafar, J. and Aziz, I.A. (2018) Risk Overview and Cost Prediction Model for Refinery Equipment Using Life Cycle Costing Analysis. In: UNSPECIFIED.

Zaid, H.M. and Adil, M. and Lee, K.C. and Latiff, N.R.A. (2018) Influence of Frequency-Dependent Dielectric Loss on Electrorheology of Surface Modified ZnO Nanofluids. In: UNSPECIFIED.

Zahari, N.Z. and Hashim, A.M. (2018) Adequacy of Flood Relief Shelters: A Case Study in Perak, Malaysia. In: UNSPECIFIED.

Zaharin, H.A. and Abdul Rani, A.M. and Ginta, T.L. and Azam, F.I. (2018) Additive Manufacturing Technology for Biomedical Components: A review. In: UNSPECIFIED.