Article

Agathiyan, A. and Gowrisankar, A. and Natarajan, P. and Bingi, K. and Shaik, N.B. (2023) Note on Fourier Transform of Hidden Variable Fractal Interpolation. Engineering Journal, 27 (12). pp. 23-36. ISSN 01258281

Babu, B.P. and Khandagale, S. and Shinde, V. and Gargote, S. and Bingi, K. (2023) Enhancing Infrastructure Safety: A UAV-Based Approach for Crack Detection. Engineering Journal, 27 (12). pp. 11-22. ISSN 01258281

Vasudevan, M. and Perumal, V. and Raja, P.B. and Ibrahim, M.N.M. and Lee, H.-L. and Gopinath, S.C.B. and Ovinis, M. and Karuppanan, S. and Ang, P.C. and Arumugam, N. and Kumar, R.S. (2023) A quadruplet 3-D laser scribed graphene/MoS2 functionalised N2-doped graphene quantum dots and lignin-based Ag-nanoparticles for biosensing. International Journal of Biological Macromolecules, 253.

Ullah, F. and Ghani, U. and Mohamed Saheed, M.S. (2023) A PN-type CuO@TiO2 nanorods heterojunction for efficient PEC water splitting: DFT model and experimental investigation on the effect of calcination temperature. International Journal of Hydrogen Energy, 48 (100). pp. 39866-39884.

Inbanaathan, P.V. and Balasubramanian, D. and Nguyen, V.N. and Le, V.V. and Wae-Hayee, M. and R, R. and Veza, I. and Yukesh, N. and Kalam, M.A. and Sonthalia, A. and Varuvel, E.G. (2023) Comprehensive study on using hydrogen-gasoline-ethanol blends as flexible fuels in an existing variable speed SI engine. International Journal of Hydrogen Energy, 48 (99). pp. 39531-39552.

Wahab, D.N.A. and Siddique, M.B.M. and Chew, J.J. and Su, H.T. and Khairuddin, N. and Khaerudini, D.S. and Hossain, M.S. and Sunarso, J. (2023) Characterization of starch biofilm reinforced with cellulose microfibers isolated from Musa Saba' midrib residue and its application as an active packaging film. Journal of Applied Polymer Science, 140 (48).

Hira, N.E. and Lock, S.S.M. and Arshad, U. and Asif, K. and Ullah, F. and Farooqi, A.S. and Yiin, C.L. and Chin, B.L.F. and Huma, Z.E. (2023) Screening of Metal Oxides and Hydroxides for Arsenic Removal from Water Using Molecular Dynamics Simulations. ACS Omega, 8 (50). pp. 48130-48144.

Zainal Abidin, A. and Zango, Z.U. and Akhdar, H. and Aldaghri, O. and Ibnaouf, K.H. and Sulieman, A. and Lim, J.W. and Ng, H.-S. and Khoo, K.S. (2023) Sustainable grafting of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) and natural rubber into a new thermoplastic elastomer film. Polymer, 289.

Sharifi, A.M. and Kwon, D.-J. and Shah, S.Z.H. and Lee, J. (2023) Modeling of frontal polymerization of carbon fiber and dicyclopentadiene woven composites with stochastic material uncertainty. Composite Structures, 326.

Abdulmunem, A.R. and Hamed, H.M. and Samin, P.M. and Mazali, I.I. and Sopian, K. (2023) Thermal management of lithium-ion batteries using palm fatty acid distillate as a sustainable bio-phase change material. Journal of Energy Storage, 73. ISSN 2352152X

Shimul, I.M. and Moshikur, R.M. and Nabila, F.H. and Moniruzzaman, M. and Goto, M. (2023) Formulation and characterization of choline oleate-based micelles for co-delivery of luteolin, naringenin, and quercetin. Food Chemistry, 429.

Mok, S.Y. and Sivapragasam, M. and Raja Shahrom, M.S. and Bustam, M.A. and Abidin, Z.Z. (2023) Screening of ionic liquids for the dissolution of chitosan using COSMO-RS. Green Chemistry, 26 (3). pp. 1577-1586.

Mim, R.T. and Negash, B.M. and Jufar, S.R. and Ali, F. (2023) Minireview on CO2 Storage in Deep Saline Aquifers: Methods, Opportunities, Challenges, and Perspectives. Energy and Fuels, 37 (23). pp. 18467-18484.

Abdullah and Faye, I. and Aziz, L.A. (2023) Artificial Neural Networks Solutions for Solving Differential Equations: A Focus and Example for Flow of Viscoelastic Fluid with Microrotation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 112 (1). pp. 76-83.

Zainuddin, N. and Nasir, N.A.A.M. and Abdullah, N. and Jamshed, W. and Ishak, A. (2023) Numerical Solution of EMHD GO-Fe3O4/H2O Flow and Heat Transfer over Moving Riga Plate with Thermal Radiation and Heat Absorption/Generation Impacts. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 112 (1). pp. 62-75.

Al-Bayati, A.D.J. and Abdulwahhab, H.A. and Al-Kayiem, H.H. and Mohamed, I.M. (2023) EXPERIMENTAL AND NUMERICAL INVESTIGATION OF FLOW MALDISTRIBUTION IN A CIRCULAR MICROCHANNEL HEAT EXCHANGER AT VARIOUS FLOWRATES. Journal of Engineering Science and Technology, 18. pp. 275-287. ISSN 18234690

Al-Kayiem, H.H. and Abdul Wahhab, H.A. and Jamil, I.E.A. and Mohamed, M.M. and Mohamed, I.M. (2023) Evaluation of 15-m-Height Solar Chimney Model Integrated with TES under Tropical Climate. International Journal of Energy Production and Management, 8 (4). pp. 211-218. ISSN 20563272

Joseph, E. and Singh, B.S.M. and Ching, D.L.C. (2023) Developing a Simple Algorithm for Photovoltaic Array Fault Detection Using MATLAB/Simulink Simulation. International Journal of Energy Production and Management, 8 (4). pp. 235-240.

Hassan, A. and Awang, M. and Pedapati, S.R. and Altaf, K. and Ahmed, N. and Marode, R.V. and Ahmed, S.W. and Soomro, I.A. (2023) Investigation on Surface Hardness and Microstructure Evolution in AA 7075-T651 Multi-Layered Laminate Fabricated Through Friction Stir Additive Manufacturing. Iranian Journal of Materials Science and Engineering, 20 (4). ISSN 17350808

Mohd Anuar, N. and Teh, H.-M. and Ma, Z. (2023) A Numerical Study on Storm Surge Dynamics Caused by Tropical Depression 29W in the Pahang Region. Journal of Marine Science and Engineering, 11 (12).

Ramesh, V.A. and Nikbakht Jarghouyeh, E. and Alraeeini, A.S. and Al-Fakih, A. (2023) Optimisation Investigation and Bond-Slip Behaviour of High Strength PVA-Engineered Geopolymer Composite (EGC) Cured in Ambient Temperatures. Buildings, 13 (12).

Ismail, M.R. and Ismail, M.C. and Shah, S.Z.H. (2023) Effect of Acetate on Microbiologically Influenced Corrosion of Internal Pipeline Surfaces. Metals, 13 (12).

Shokrollahi, F. and Lau, K.K. and Partoon, B. (2023) Experimental Evaluation of Chemical Reactions Involved in Ultrasonic-Assisted Absorption of Bulk CO2. Processes, 11 (12).

Ho, C.-D. and Chen, L. and Tu, J.-W. and Lin, Y.-C. and Lim, J.-W. and Chen, Z.-Z. (2023) Investigation of CO2 Absorption Rate in Gas/Liquid Membrane Contactors with Inserting 3D Printing Mini-Channel Turbulence Promoters. Membranes, 13 (12).

Bakar, S.N.S.S.A. and Alsaffar, M.A. and Abdullah, B. and Shaharun, M.S. and Abdullah, S. and Ayodele, B.V. (2023) Catalytic Performance of Bimetallic Cobalt�Nickel/Graphene Oxide for Carbon Dioxide Reforming of Methane. ChemEngineering, 7 (6).

Subhani, N. and May, Z. and Alam, Md.K. and Mamun, S. (2023) An enhanced gain non-isolated quadratic boost DC-DC converter with continuous source current. PLoS ONE, 18 (12 Dec).

Remesh, S. and Vasudevan, M. and Sivakumar, M. and Perumal, V. and Ovinis, M. and Karuppanan, S. and Edison, T.N.J.I. and Raja, P.B. and Ibrahim, M.N.M. and Latip, A.F.B.A. and Arumugam, N. and Kumar, R.S. (2023) In-situ Mg-Al LDH infused lignin-derived laser scribed graphene for facilitated ion transport in flexible supercapacitor application. Journal of the Taiwan Institute of Chemical Engineers, 153.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Usman, A. and Tanjung, L.E. and Aliyu, I. and Jagaba, A.H. (2023) Optimizing biochar-based geopolymer composites for enhanced water resistance in asphalt mixes: an experimental, microstructural, and multi-objective analysis. Journal of Engineering and Applied Science, 70 (1).

Arokiasamy, L. and Fujikawa, T. and Piaralal, S.K. and Arumugam, T. (2023) Role of HRM Practices in Organization Performance: A Survey Approach. International Journal of Sociotechnology and Knowledge Development, 16 (1). ISSN 19416253

Banjar, M.F. and Joynal Abedin, F.N. and Fizal, A.N.S. and Muhamad Sarih, N. and Hossain, M.S. and Osman, H. and Khalil, N.A. and Ahmad Yahaya, A.N. and Zulkifli, M. (2023) Synthesis and Characterization of a Novel Nanosized Polyaniline. Polymers, 15 (23).

Sulaimon, A.A. and Murungi, P.I. and Tackie-Otoo, B.N. and Nwankwo, P.C. and Bustam, M.A. (2023) Analysis of natural okra extracts as corrosion inhibitors for mild steel in acidic medium. Environmental science and pollution research international, 30 (56). pp. 119309-119328. ISSN 16147499

Al Salaheen, M. and Alaloul, W.S. and Alzubi, K.M. and Malkawi, A.B.A. and Musarat, M.A. (2023) Advancing waste-based construction materials through carbon dioxide curing: A comprehensive review. Results in Engineering, 20.

Nik Mohamed Daud, N.M.R. and Kok Eng, K. and Jumbri, K. and Mohammed Nor, A. and Suhor, M.F. and Borhan, N. and Abas, A.Z. and Aizamddin, M.F. and Mohd Pu'ad, M.J. and Muhammad, M.F. (2023) Benchmarking the impact of nickel filler addition, weld hardness, environmental pH, and corrosion inhibitors on A333 carbon steel pipe weld corrosion. Results in Engineering, 20.

Khan, M.N. and Jan, A.A. and Asif, M. and Lai, F.-W. and Shad, M.K. and Shadab, S. (2023) Do domestic innovations promote trade openness? Empirical evidence from emerging economies. Heliyon, 9 (12). ISSN 24058440

Ja'e, I.A. and Salih, A.R. and Syamsir, A. and Min, T.H. and Itam, Z. and Amaechi, C.V. and Anggraini, V. and Sridhar, J. (2023) Experimental and predictive evaluation of mechanical properties of kenaf-polypropylene fibre-reinforced concrete using response surface methodology. Developments in the Built Environment, 16.

Waqar, A. and Othman, I. and Shafiq, N. and Mateen Khan, A. (2023) Integration of passive RFID for small-scale construction project management. Data and Information Management, 7 (4). ISSN 25439251

Iferobia, C.C. and Ahmad, M. (2023) Nanoindentation application in geomechanics analysis of shale under high-temperature treatment/thermal fracturing conditions. Bulletin of Engineering Geology and the Environment, 82 (12).

Lawal, I.M. and Soja, U.B. and Hussaini, A. and Saleh, D. and Aliyu, M. and Noor, A. and Birniwa, A.H. and Jagaba, A.H. (2023) Sequential batch reactors for aerobic and anaerobic dye removal: A mini-review. Case Studies in Chemical and Environmental Engineering, 8. ISSN 26660164

Al-Sabaeei, A.M. and Alhussian, H. and Abdulkadir, S.J. and Sutanto, M. and Alrashydah, E. and Mabrouk, G. and Bilema, M. and Milad, A. and Abdulrahman, H. (2023) Computational modelling for predicting rheological properties of composite modified asphalt binders. Case Studies in Construction Materials, 19.

Jagaba, A.H. and Birniwa, A.H. and Usman, A.K. and Mu'azu, N.D. and Yaro, N.S.A. and Soja, U.B. and Abioye, K.J. and Almahbashi, N.M.Y. and Al-dhawi, B.N.S. and Noor, A. and Lawal, I.M. (2023) Trend and current practices of coagulation-based hybrid systems for pulp and paper mill effluent treatment: mechanisms, optimization techniques and performance evaluation. Journal of Cleaner Production, 429. ISSN 09596526

Waqar, A. and Husin Gultom, M. and Hannan Qureshi, A. and Evianti Tanjung, L. and R. Almujibah, H. (2023) Complexities to the deployment of cloud computing for sustainability of small construction projects: Evidence from Pakistan. Ain Shams Engineering Journal, 14 (12).

Kalam, S. and Arif, M. and Raza, A. and Lashari, N. and Mahmoud, M. (2023) Data-driven modeling to predict adsorption of hydrogen on shale kerogen: Implication for underground hydrogen storage. International Journal of Coal Geology, 280.

Rouf, H. and Ramli, A. and Anuar, N.A.S.I.K. and Yunus, N.M. (2023) Ce�Zr-based mixed oxide catalyst for oxidative depolymerization of kenaf stalk (biomass) into vanillin. Bioresources and Bioprocessing, 10 (1).

Adnan, K. and Akbar, R. and Wang, K.S. (2023) Usability enhancement model for unstructured text in big data. Journal of Big Data, 10 (1). ISSN 21961115

Akinyemi, O.D. and Elsaadany, M. and Siddiqui, N.A. and Elkurdy, S. and Olutoki, J.O. and Islam, M.M. (2023) Machine learning application for prediction of sonic wave transit time - A case of Niger Delta basin. Results in Engineering, 20.

Waqar, A. and Alshehri, A.H. and Alanazi, F. and Alotaibi, S. and Almujibah, H.R. (2023) Evaluation of challenges to the adoption of intelligent transportation system for urban smart mobility. Research in Transportation Business and Management, 51.

Salman, N.A.S. and Saheed, M.S.M. and Saqib, N.U. and Latip, A.F.A. and Adnan, R. (2023) Polydimethylsiloxane-carbon nanotubes-based hydrophobic sponge for treatment of palm oil mill effluents with enhanced reusability. Journal of Environmental Chemical Engineering, 11 (6).

Waqar, A. and Othman, I. and Saad, N. and Qureshi, A.H. and Azab, M. and Khan, A.M. (2023) Complexities for adopting 3D laser scanners in the AEC industry: Structural equation modeling. Applications in Engineering Science, 16. ISSN 26664968

Khan, K. and Hassan, F. and Koo, J. and Mohammed, M.A. and Hasan, Y. and Shamsheela and Muhammad, D. and Chowdhry, B.S. and Qureshi, N.M.F. (2023) Blockchain-based applications and energy effective electric vehicle charging � A systematic literature review, challenges, comparative analysis and opportunities. Computers and Electrical Engineering, 112. ISSN 00457906

Dzubir, F.A.A. and Othman, A.R. and Othman, M.F. (2023) Stress Classification Lines for Non-Standard Y-Tee Design in Piping System. Journal of Advanced Research in Applied Sciences and Engineering Technology, 33 (1). pp. 367-383.

Ali, F. and Negash, B.M. and Ridha, S. and Abdulelah, H. (2023) A review on the interfacial properties of caprock/CO2/brine system-implications for structural integrity of deep saline aquifers during geological carbon storage. Earth-Science Reviews, 247.

Dezfouli, M.M.S. and Dehghani-Sanij, A.R. and Kadir, K. and Suhairi, R. and Rostami, S. and Sopian, K. (2023) Is a fan coil unit (FCU) an efficient cooling system for net-zero energy buildings (NZEBs) in tropical regions? An experimental study on thermal comfort and energy performance of an FCU. Results in Engineering, 20.

Usman, A. and Sutanto, M.H. and Yaro, N.S.A. and Albuaymi, M. and Alluqmani, A.E. and Alanazi, H. (2023) Effects of γ radiation on rutting and fatigue performance of WPET asphalt mixtures. Case Studies in Construction Materials, 19.

Qin, J. and Ying, J. and Wang, Y. and Niu, A. and Lin, C. and Qiu, R. and Lim, J.W. (2023) Insights into active and passive carbon sequestration and causticity reduction in hazardous red mud slurry. Carbon Research, 2 (1).

Hassan, A. and Awang, M. and Pedapati, S.R. and Altaf, K. and Marode, R.V. and Ahmed, S.W. (2023) Experimental investigation on tool pin profile for defect-free multi-layered laminates using friction stir additive manufacturing. Results in Engineering, 20.

Hamza, M.F. and Soleimani, H. and Lorimer, S. and Sikiru, S. and Mudassir Hassan, Y. and Rostami, A. and Soleimani, H. and Demiral, B.M.R. (2023) Hydrothermal synthesis, response surface study, and interfacial tension evaluation of modified nanotube. Journal of Molecular Liquids, 391.

Waqar, A. and Othman, I. and Saad, N. and Azab, M. and Khan, A.M. (2023) BIM in green building: Enhancing sustainability in the small construction project. Cleaner Environmental Systems, 11. ISSN 26667894

Liaw, K.L. and Ahmadihosseini, A. and Rosle, A.F.H.B. and Kurnia, J.C. and Sasmito, A.P. (2023) Enhanced performance of pinned metal foam heat sinks with dielectric coolant � A pore-scale numerical study. International Communications in Heat and Mass Transfer, 149.

Devan, P.A.M. and Ibrahim, R. and Omar, M. and Bingi, K. and Nagarajapandian, M. and Abdulrab, H. (2023) A novel fractional-order dead-time compensating controller for the wireless networks. Scientific Reports, 13 (1).

Abioye, K.J. and Harun, N.Y. and Sufian, S. and Yusuf, M. and Khan, M.I. and Jagaba, A.H. and Sikiru, S. and Waqas, S. and Kamyab, H. and Al-Enizi, A.M. and Sehgal, S.S. and Gupta, M. and Rezania, S. and Ibrahim, H. (2023) Kinetics and thermodynamic analysis of palm oil decanter cake and alum sludge combustion for bioenergy production. Sustainable Chemistry and Pharmacy, 36.

Odiyi, D.C. and Sharif, T. and Choudhry, R.S. and Mallik, S. and Shah, S.Z.H. (2023) A review of advancements in synthesis, manufacturing and properties of environment friendly biobased Polyfurfuryl Alcohol Resin and its Composites. Composites Part B: Engineering, 267. ISSN 13598368

Noor, A. and Ali, W. and Ahmad, T. and Noori, M.T. and Anwar, S. and Khan, M.E. and Affam, A.C. and Bashiri, A.H. and Zakri, W. and Jagaba, A.H. (2023) Treatment of petrochemical wastewater by 3D printed biocarrier integrated activated sludge system: Optimization by response surface methodology, biokinetics, and microbial community. Journal of Water Process Engineering, 56.

Yadav, A.K. and Singh, K. and Srivastava, P.K. and Mahamad, S. and Alghamdi, A. and Baleanu, D. and Ahmadian, A. (2023) ECCANS: Enhanced CRITIC-based Context-Aware Network Selection algorithm for 5G HetNet. Sustainable Energy Technologies and Assessments, 60.

Nazar, M. and Ul Hassan Shah, M. and Ahmad, A. and Goto, M. and Zaireen Nisa Yahya, W. and Moniruzzaman, M. (2023) Aggregation, toxicity, and biodegradability study of an ionic liquid-based formulation for effective oil spill remediation. Chemosphere, 344.

Karim, M.A. and Abdullah, M.Z. and Waqar, A. and Deifalla, A.F. and Ragab, A.E. and Khan, M. (2023) Analysis of the mechanical properties of the single layered braid reinforced thermoplastic pipe (BRTP) for oil & gas industries. Results in Engineering, 20.

Lam, S.-M. and Sin, J.-C. and Warren Tong, M.W. and Zeng, H. and Li, H. and Huang, L. and Lin, H. and Lim, J.-W. (2023) Eminent destruction of organics and pathogens concomitant with power generation in a visible light-responsive photocatalytic fuel cell with NiFe2O4/ZnO pine tree-like photoanode and CuO/Cu2O nanorod cathode. Chemosphere, 344.

Lim, S.W. and Kansedo, J. and Tan, I.S. and Tan, Y.H. and Nandong, J. and Lam, M.K. and Ongkudon, C.M. (2023) Biosynthesis of polyhydroxyalkanoates (PHAs) from non-edible Cerbera odollam (sea mango) oil. Bioresource Technology Reports, 24.

Susilowati, Y. and Hardiyasanti, D.C. and Widianingrum, S. and Endrasari, F. and Djamari, D.W. and Bahar, A.H. and Wahono, J. and Veza, I. (2023) Carbon credit and economic feasibility analysis of biomass-solar PV-battery power plant for application in Indonesia remote area. Renewable Energy, 219.

Al-dhawi, B.N.S. and Kutty, S.R.M. and Alawag, A.M. and Almahbashi, N.M.Y. and Al-Towayti, F.A.H. and Algamili, A. and Aminu, N. and Al-Mekhlafi, A.-B.A. and Birniwa, A.H. and Jagaba, A.H. (2023) Optimal parameters for boron recovery in a batch adsorption study: Synthesis, characterization, regeneration, kinetics, and isotherm studies. Case Studies in Chemical and Environmental Engineering, 8.

Kiatkittipong, W. and Lim, J.W. and Najdanovic-Visak, V. (2023) Editorial preface: VSI �Algae and biological residues in South-East Asia for sustainable energy production�. Biomass and Bioenergy, 179. ISSN 09619534

Shah, S.Z.H. and Altaf, K. and Lee, J. and Sharif, T. and Choudhry, R.S. and Hussain, S.M. (2023) Bending performance and failure mechanisms of hybrid and regular sandwich composite structures with 3D printed corrugated cores. Composite Structures, 325.

Ahmad, K.N. and Samidin, S. and Rosli, M.I. and Yusop, M.R. and Kassim, M.B. and Ayodele, B.V. and Yarmo, M.A. and Wan Isahak, W.N.R. (2023) Alkaline earth metal modified nickel nanoparticles supported on exfoliated g-C3N4 for atmospheric CO2 methanation. Journal of Environmental Chemical Engineering, 11 (6).

Hagar, H.S. and Jufar, S.R. and Lee, J.H. and Al-mahbashi, N. and Alameen, M.B. and Kwon, S. and Jagaba, A.H. and Rathnayake, U. (2023) Chitin nanocrystals: A promising alternative to synthetic surfactants for stabilizing oil-in-water emulsions. Case Studies in Chemical and Environmental Engineering, 8.

Bheel, N. and Mohammed, B.S. and Ahmed Ali, M.O. and Shafiq, N. and Mohamed Tag-eldin, E. and Ahmad, M. (2023) Effect of polyvinyl alcohol fiber on the mechanical properties and embodied carbon of engineered cementitious composites. Results in Engineering, 20.

Cai, Z. and Li, Y. and Herath, M.T. and Topa, A. and Djukic, L.P. and Rodgers, D.C. and Yang, R. and Pearce, G.M.K. (2023) Numerical simulation of �sand-like� polymer flow during rotational moulding using smoothed particle hydrodynamics method. Applied Mathematical Modelling, 124. pp. 694-712. ISSN 0307904X

Vasudevan, M. and Remesh, S. and Perumal, V. and Raja, P.B. and Ibrahim, M.N.M. and Gopinath, S.C.B. and Lee, H.-L. and Karuppanan, S. and Ovinis, M. and Arumugam, N. and Kumar, R.S. (2023) Lignin derived nanoparticle intercalation on nitrogen-doped graphene quantum dots for electrochemical sensing of cardiac biomarker. Microchemical Journal, 195.

Zango, Z.U. and Binzowaimil, A.M. and Aldaghri, O.A. and Eisa, M.H. and Garba, A. and Ahmed, N.M. and Lim, J.W. and Ng, H.-S. and Daud, H. and Jumbri, K. and Khoo, K.S. and Ibnaouf, K.H. (2023) Applications of covalent organic frameworks for the elimination of dyes from wastewater: A state-of-the-arts review. Chemosphere, 343.

Azmi, N. and Ameen, M. and Yashni, G. and Yusup, S. and Yusoff, M.H.M. and Chai, Y.H. (2023) In Situ Catalytic Conversion of Glycerol to Triacetin under Microwave Irradiation with Commercial Palladium on Activated Carbon Catalyst. Journal of Sustainable Development of Energy, Water and Environment Systems, 11 (4).

Ali, S. and Ahmad, F. and Yusoff, P.S.M.M. and Muhamad, N. and Haider, W. and Malik, K. and Shahed, C.A. (2023) Interface and mechanical properties of graphene/copper composite with sonication induced Au decoration of graphene. Powder Technology, 430.

Najm, A.S. and Al-Ghamdi, A. and Amin, M.T. and Al Ghamdi, A. and Moria, H. and Holi, A.M. and Abed, A.M. and AL-Zahrani, A.A. and Sopian, K. and Bais, B. and Sultan, A.J. (2023) Towards a promising systematic approach to the synthesis of CZTS solar cells. Scientific Reports, 13 (1).

Rahman, R.A. and Masrom, S. and Mohamad, M. and Sari, E.N. and Saragih, F. and Rahman, A.S.A. (2023) Comparisons of automated machine learning (AutoML) in predicting whistleblowing of academic dishonesty with demographic and theory of planned behavior. MethodsX, 11.

Almahbashi, N.M.Y. and Kutty, S.R.M. and Jagaba, A.H. and Al-nini, A. and Al-Dhawi, B.N.S. and Rathnayake, U. (2023) Phenol removal from aqueous solutions using rice stalk-derived activated carbon: Equilibrium, kinetics, and thermodynamics study. Case Studies in Chemical and Environmental Engineering, 8.

Ahmed, S.U. and Shuja, J. and Tahir, M.A. (2023) Leaf classification on Flavia dataset: A detailed review. Sustainable Computing: Informatics and Systems, 40.

Waqar, A. and Othman, I. and Shafiq, N. and Deifalla, A. and Ragab, A.E. and Khan, M. (2023) Impediments in BIM implementation for the risk management of tall buildings. Results in Engineering, 20.

Usman, F. and Ghazali, K.H. and Muda, R. and Johari, N.H. and Dennis, J.O. and Tamam, N. and Sulieman, A. and Ji, Y. (2023) Magnetoresistance and magneto-plasmonic sensors for the detection of cancer biomarkers: A bibliometric analysis and recent advances. Sensors and Actuators Reports, 6.

Park, Y.-J. and Lee, H. and Choi, H.L. and Tapia, M.C. and Chuah, C.Y. and Bae, T.-H. (2023) Mixed-dimensional nanocomposites based on 2D materials for hydrogen storage and CO2 capture. npj 2D Materials and Applications, 7 (1).

Chin, S.Y. and Lim, S.F. and Lau, K.K. and Thangavel, M. and Kamaruzaman, M.R. (2023) Iron-Based Nanoparticles Oxygen Scavenger for Suppressing Heat-Stable Salts Formation in Amine. Chemical Engineering and Technology, 46 (12). pp. 2670-2675.

Arivarasi, A. and Thiripurasundari, D. and Selvakumar, A.A. and Kumaar, B. and Aghil, T. and Rahul, S. and Kannan, R. (2023) An advanced cost-efficient IoT method for stroke rehabilitation using smart gloves. Nanotechnology and Precision Engineering, 6 (4).

Hasnida Raja Hashim, R. and Anas Nagoor Gunny, A. and Ting, S.S. and Gopinath, S.C.B. and Fong, Y.Y. and Pareek, S. and Makhtar, M.M.Z. and Shukor, H. (2023) Fabrication of active food packaging based on PLA/Chitosan/CNC-containing Coleus aromaticus essential oil: application to Harumanis mango. Journal of Food Measurement and Characterization, 17 (6). pp. 6341-6349.

Sundera Murthe, S. and Sreekantan, S. and Mydin, R.B.S.M.N. and Vasudevan, M. and Appaturi, J.N. (2023) Shelf-life, bioburden, water and oxygen permeability studies of laser welded SEBS/PP blended polymer. Scientific Reports, 13 (1).

Haque, M.A. and Rahman, M.A. and Al-Bawri, S.S. and Yusoff, Z. and Sharker, A.H. and Abdulkawi, W.M. and Saha, D. and Paul, L.C. and Zakariya, M.A. (2023) Machine learning-based technique for gain and resonance prediction of mid band 5G Yagi antenna. Scientific Reports, 13 (1).

Khan, R. and Petru, J. and Seikh, A.H. (2023) Erosion prediction due to micron-sized particles in the multiphase flow of T and Y pipes of oil and gas fields. International Journal of Pressure Vessels and Piping, 206.

Al-mahbashi, N.M.Y. and Kutty, S.R.M. and Jagaba, A.H. and Al-nini, A. and Sholagberu, A.T. and Aldhawi, B.N.S. and Rathnayake, U. (2023) Sustainable sewage sludge biosorbent activated carbon for remediation of heavy metals: Optimization by response surface methodology. Case Studies in Chemical and Environmental Engineering, 8.

Tong, K.T.X. and Tan, I.S. and Foo, H.C.Y. and Show, P.L. and Lam, M.K. and Wong, M.K. (2023) Sustainable circular biorefinery approach for novel building blocks and bioenergy production from algae using microbial fuel cell. Bioengineered, 14 (1). pp. 246-289. ISSN 21655987

Wang, C. and Zhang, Y. and Lim, L.G. and Cao, W. and Zhang, W. and Wan, X. and Fan, L. and Liu, Y. and Zhang, X. and Tian, Z. and Liu, X. and Pan, X. and Zheng, Y. and Pan, R. and Tan, Y. and Zhang, Z. and McIntyre, R.S. and Li, Z. and Ho, R.C.M. and Tang, T.B. (2023) An fNIRS investigation of novel expressed emotion stimulations in schizophrenia. Scientific Reports, 13 (1).

Aminu, N. and Kutty, S.R.M. and Isa, M.H. and Ismail, A. and Noor, A. and Al-dhawi, B.N.S. and Jagaba, A.H. (2023) Hybrid suspended growth bioreactor system for the nitrification, denitrification, and ammonia removal from beverage industry wastewater: Biokinetic modelling and optimization by response surface methodology. Case Studies in Chemical and Environmental Engineering, 8. ISSN 26660164

Sokama-Neuyam, Y.A. and Yusof, M.A.M. and Owusu, S.K. and Darkwah-Owusu, V. and Turkson, J.N. and Otchere, A.S. and Ursin, J.R. (2023) Experimental and theoretical investigation of the mechanisms of drying during CO2 injection into saline reservoirs. Scientific Reports, 13 (1).

Amin, H.U. and Ullah, R. and Reza, M.F. and Malik, A.S. (2023) Single-trial extraction of event-related potentials (ERPs) and classification of visual stimuli by ensemble use of discrete wavelet transform with Huffman coding and machine learning techniques. Journal of NeuroEngineering and Rehabilitation, 20 (1).

Rajendran, Y. and Abdulkadir, B.A. and Jun, L.N. and Miskan, S.N. and Vo, D.-V.N. and Lim, J.W. and Setiabudi, H.D. (2023) Ethylene Glycol Dry Reforming over La-Co/Al2O3: Optimization and Regeneration Studies. Chemical Engineering and Technology, 46 (12). pp. 2521-2531.

Bello, U. and Amran, N.A. and Samsuri, S. and Ruslan, M.S.H. (2023) LINEAR KINETICS MODELLING AND THERMODYNAMICS STUDY OF SUPERCRITICAL CO2-DERIVED OIL EXTRACTS FROM PALM FRUIT MESOCARP. Journal of Oil Palm Research, 35 (4). pp. 713-724.

Lau, H.Y. and Kiew, P.L. and Tan, L.S. and Lam, M.K. and Yeoh, W.M. (2023) Deciphering the effects of plasticizers in potato-based bioplastic for food and fresh produce packaging. International Journal of Environmental Science and Technology, 20 (12). pp. 13703-13716.

Moujdin, I.A. and Khan, M.S. and Abulkhair, H.A. and Shaiban, A.A. and Organji, H.A. and Alsaiari, A.O. (2023) Influence of hydrogenated diesel/H2O2 blend fuel on diesel engine performance and exhaust emission characterization. Scientific Reports, 13 (1).

Abbasi, A.Z. and Khan, M.K. and Naeem, F. and Albashrawi, M. and Ting, D.H. and Kumar, S. (2023) Gamers� subjective Well-Being: the role of Peripheral and Core elements of eSporst Videogame Addiction. Current Psychology, 42 (36). pp. 32230-32243. ISSN 10461310

Soni, A. and Das, P.K. and Yusuf, M. and Pasha, A.A. and Irshad, K. and Bourchak, M. (2023) Synergy of RHA and silica sand on physico-mechanical and tribological properties of waste plastic�reinforced thermoplastic composites as floor tiles. Environmental Science and Pollution Research, 30 (60). pp. 124566-124584.

Ahmad, M.I. and Bahtiyar, D. and Khan, H.W. and Shah, M.U.H. and Kiran, L. and Aydinol, M.K. and Yusuf, M. and Kamyab, H. and Rezania, S. (2023) Ionic liquids-assisted electrolytes in aqueous zinc ion batteries. Journal of Energy Storage, 72.

Aboelazm, E. and Khe, C.S. and Shukur, M.F. and Chong, K.F. and Saheed, M.S.M. and Hegazy, M.B.Z. (2023) Synergistic nanostructuring of CoNi-carbide/reduced graphene oxide derived from porous coordination polymers for high-performance hybrid supercapacitors. Journal of Energy Storage, 72.

Almashwali, A.A. and Idress, M. and Lal, B. and Salem, A. and Jin, Q.C. (2023) Kinetic and Thermodynamic Influence of NaCl on Methane Hydrate in an Oil-Dominated System. ACS Omega, 8 (47). pp. 44796-44803.

Anwer, A. and Ainouz, S. and Saad, N.M. and Ali, S.S.A. and Meriaudeau, F. (2023) Joint network for specular highlight detection and adversarial generation of specular-free images trained with polarimetric data. Neurocomputing, 559.

Abdul Rahim, A.R. and Johari, K. and Rabat, N.E. and Hussain, M. and Shezad, N. and Park, Y.-K. (2023) Isothermal, kinetic, thermal, and economic characteristics of NaOH-modified charred�desiccated coconut waste as adsorbent for lead (II) in water phase. Journal of Industrial and Engineering Chemistry, 127. pp. 171-181.

Oke, A.E. and Farouk Kineber, A. and Abdel-Tawab, M. and Abubakar, A.S. and Albukhari, I. and Kingsley, C. (2023) Barriers to the implementation of cloud computing for sustainable construction in a developing economy. International Journal of Building Pathology and Adaptation, 41 (5). pp. 988-1013. ISSN 23984708

Falletta, E. and Galloni, M.G. and Mila, N. and bin Roslan, M.N. and Abd Ghani, N. and Cerrato, G. and Giordana, A. and Magni, M. and Spriano, S. and Boffito, D.C. and Bianchi, C.L. (2023) Fast and Efficient Piezo-Photocatalytic Mineralization of Ibuprofen by BiOBr Nanosheets under Solar Light Irradiation. ACS Photonics, 10 (11). pp. 3929-3943.

Rostami, A. and Wahaab, F.A. and Soleimani, H. and Sikiru, S. and Khosravi, V. and Yusuff, A.O. and Hamza, M.F. (2023) Advances in fibre Bragg grating technology for magnetic field sensing: A review. Measurement: Journal of the International Measurement Confederation, 221.

Rostami, A. and Soleimani, H. and Samavati, Z. and Khodapanah, N. and Soleimani, H. and Sikiru, S. and Falalu Hamza, M. and Khosravi, V. (2023) Real-time monitoring of urea slow release through fiber Bragg grating sensors. Measurement: Journal of the International Measurement Confederation, 221.

Mulk, W.U. and Hassan Shah, M.U. and Shah, S.N. and Zhang, Q.-J. and Khan, A.L. and Sheikh, M. and Younas, M. and Rezakazemi, M. (2023) Enhancing CO2 separation from N2 mixtures using hydrophobic porous supports immobilized with tributyl-tetradecyl-phosphonium chloride P44414Cl. Environmental Research, 237.

Ayodele, F.O. and Mustapa, S.I. and Ayodele, B.V. (2023) The Potential of Renewable Energy Green Financing through Carbon Taxation to Achieve Net-Zero Emissions Target. International Journal of Energy Economics and Policy, 13 (6). pp. 388-396.

Khan, M.B. and Iqbal Khan, M. and Shafiq, N. and Abbas, Y.M. and Imran, M. and Fares, G. and Khatib, J.M. (2023) Enhancing the mechanical and environmental performance of engineered cementitious composite with metakaolin, silica fume, and graphene nanoplatelets. Construction and Building Materials, 404.

Ali, I. and Ahmad, M. and Ridha, S. and Iferobia, C.C. and Lashari, N. (2023) Enhancing drilling mud performance through CMITS-modified formulations: rheological insights and performance optimization. RSC Advances, 13 (47). pp. 32904-32917.

Su�ait, M.S. and Rayung, M. and Ibrahim, S. and Ahmad, A. (2023) Bio-Based Polyurethane Polymer Electrolyte for Dye Solar Cells Application. ACS Symposium Series, 1454. pp. 37-62. ISSN 00976156

Majid, A.F.A. and Dewi, R. and Shahri, N.N.M. and Shahrin, E.W.E.S. and Kusrini, E. and Shamsuddin, N. and Lim, J.-W. and Thongratkaew, S. and Faungnawakij, K. and Usman, A. (2023) Enhancing adsorption performance of alkali activated kaolinite in the removal of antibiotic rifampicin from aqueous solution. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 676.

Shivangi and Singh, P. and Mohammed, B.S. (2023) The Efficacy of Electromechanical Impedance Monitoring of Embedded Piezoelectric Ceramic Lead Zirconium Titanate Sensors in Different Orientations for Hybrid Fiber-Reinforced Concrete Structures Hydration. Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 6 (4). ISSN 25723901

Ong, P.Y. and Jamaludin, S.N.F. (2023) Fracture Network Analysis of Karstified Subis Limestone Build-Up in Niah, Sarawak. Applied Sciences (Switzerland), 13 (22).

Rasangika, A.H.D.K. and Nasif, M.S. and Al-Waked, R. (2023) Comparison of Forced Convective Heat-Transfer Enhancement of Conventional and Thin Plate-Fin Heat Sinks under Sinusoidal Vibration. Applied Sciences (Switzerland), 13 (21).

Nordin, N.S. and Al-Sharifi, H.A.M. and Kasim, A.R.M. and Waini, I. and Mokhtar, M. and Romlie, M.F. and Samsudin, D. and Adytia, D. (2023) Mathematical Model of Reiner-Philippoff Embedded with Al2 O3 and Cu Particles over a Shrinking Sheet with Mixed Convection and Mass Flux Effect. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 111 (2). pp. 195-213.

Alameen, M.B. and Elraies, K.A. and Almansour, A. and Mohyaldinn, M. and Hagar, H. (2023) Quartz Hydrolysis Analysis of Pure Quartz for Enhanced Oil Production; Influence of Time, pH, and Salinity on Hydrolysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 111 (2). pp. 99-106.

Sinin, N.A.M. and Rais, A.R.M. and Sopian, K. and Ibrahim, M.A. (2023) The concentration factor on the mixture of Ag paste and H3 PO4 solution as a dopant paste for contact formation in silicon solar cells. Journal of Ovonic Research, 19 (6). pp. 681-694.

Mohd Tamidi, A. and Lau, K.K. and Ng, L.H. and Mhd Yusof, S.M. and Azmi, N. and Zakariya, S. and Khalit, S.H. and Quek, V.C. (2023) Numerical Modeling and Economic Analysis of Ultrasonic-Assisted CO2 Absorption Process for Offshore Application. Processes, 11 (11).

Sattar, M. and Othman, A.R. and Othman, M.F. and Ali, H.T. and Khan, M.K. (2023) New Creep Crack Growth Prediction Model for the Life Assessment of Stainless-Steel Material Using Computational Modeling. Metals, 13 (11).

Shahed, C.A. and Ahmad, F. and Günister, E. and Altaf, K. and Ali, S. and Raza, A. and Malik, K. and Haider, W. (2023) Microstructure and mechanical performance of low-cost biomedical-grade Titanium-316L alloy. Journal of Materials Research and Technology, 27. pp. 8008-8022.

Ibrahim, M.K. and Yusof, U.K. and Eisa, T.A.E. and Nasser, M. (2023) Enhanced Genetic Method for Optimizing Multiple Sequence Alignment. Mathematics, 11 (22).

Bin Mahfouz, A.S. and Nasir, R. and Mannan, H.A. and Abdulrahman, A. and Bt Mohshim, D.F. (2023) Theoretical analysis of various permeation models for gas transport through a covalent organic framework (COF) mixed matrix membrane Theoretische Analyse verschiedener Permeationsmodelle für den Gastransport durch eine Membran mit kovalentem organischem Gerüst (KOG) und gemischter Matrix. Materialwissenschaft und Werkstofftechnik, 54 (11). pp. 1400-1406. ISSN 09335137

Jusoh, R. and Aksah, S.J. and Zainuddin, N. and Ibrahim, Z.B. (2023) Numerical Solver of A(alpha)-stable for Stiff Ordinary Differential Equations. Engineering Letters, 31 (4). pp. 1574-1583.

Fati, S.M. and Muneer, A. and Alwadain, A. and Balogun, A.O. (2023) Correction to: Cyberbullying Detection on Twitter Using Deep Learning-Based Attention Mechanisms and Continuous Bag of Words Feature Extraction (Mathematics, (2023), 11, 16, (3567), 10.3390/math11163567). Mathematics, 11 (21).

Waqar, A. and Andri and Qureshi, A.H. and Almujibah, H.R. and Tanjung, L.E. and Utami, C. (2023) Evaluation of success factors of utilizing AI in digital transformation of health and safety management systems in modern construction projects. Ain Shams Engineering Journal, 14 (11).

Zamzuki, F.A. and Lola, M.S. and Aruchunan, E. and Muthuvalu, M.S. and Jubilee, R.V.W. and Zainuddin, N.H. and Abdul Hamid, A.A.K. and Mokhtar, N.A. and Abdullah, M.T. (2023) Assessing the sustainability of the homestay industry for the East Coast of Malaysia using the Delphi approach. Heliyon, 9 (11).

Isa, M.H. and Ajab, H. and Yaqub, A. (2023) Economical electrochemical process for PAHs removal form offshore produced water. Journal of Hazardous Materials Advances, 12.

Rahman, M.T. and Habib, K. and Quader, M.N. and Aslfattahi, N. and Kadirgama, K. and Das, L. (2023) Effect of porous density of twisted tape inserts on heat transfer performance inside a closed conduit. Heliyon, 9 (11).

Ullah, A. and Sakidin, H. and Gul, S. and Shah, K. and Muthuvalu, M.S. and Abdeljawad, T. and Iqbal, M. (2023) Sensitivity Analysis-Based Validation of the Modified NERA Model for Improved Performance. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (3). pp. 1-11.

Veza, I. and Asy'ari, M.Z. and Idris, M. and Epin, V. and Rizwanul Fattah, I.M. and Spraggon, M. (2023) Electric vehicle (EV) and driving towards sustainability: Comparison between EV, HEV, PHEV, and ICE vehicles to achieve net zero emissions by 2050 from EV. Alexandria Engineering Journal, 82. pp. 459-467. ISSN 11100168

M. Sultan, S. and Tso, C.P. and Sopian, K. and K Ajeel, R. and Sobayel, K. and Ibrahim, A. and Z. Abdullah, M. (2023) Development of assessment methods for photovoltaic module enhancing techniques using the lifespan parameter. Heliyon, 9 (11). ISSN 24058440

Asif, M. and Khan, P.A. and Irfan, F. and Salim, M. and Jan, A. and Khan, M. (2023) Is gender diversity is diversity washing or good governance for firm sustainable development goal performance: A scoping review. Environmental Science and Pollution Research, 30 (53). pp. 114690-114705. ISSN 09441344

Ma, Y. and Mustapha, F. and Ishak, M.R. and Abdul Rahim, S. and Mustapha, M. (2023) Machine learning methods for multi-rotor UAV structural damage detection based on MEMS sensor. International Journal of Aeroacoustics, 22 (7-8). pp. 656-674.

Waqar, A. and Alharbi, L.A. and Abdullah Alotaibi, F. and Othman, I. and Almujibah, H. (2023) Impediment to implementation of Internet of Things (IOT) for oil and gas construction project Safety: Structural equation modeling approach. Structures, 57. ISSN 23520124

Nazri, N.S. and Fudholi, A. and Solomin, E. and Arifin, M. and Yazdi, M.H. and Suyono, T. and Priandana, E.R. and Mustapha, M. and Hamsan, M.H. and Hussain, A.H. and Khaidzir, M.F.S. and Ali Zaini, M.I. and Rosli, N.N. and Mohammad, M. and Sopian, K. (2023) Analytical and experimental study of hybrid photovoltaic�thermal�thermoelectric systems in sustainable energy generation. Case Studies in Thermal Engineering, 51.

Altaf, M. and Alaloul, W.S. and Musarat, M.A. and Qureshi, A.H. (2023) Life cycle cost analysis (LCCA) of construction projects: sustainability perspective. Environment, Development and Sustainability, 25 (11). pp. 12071-12118.

Yıldız, M. and Gomes, R.F. and Felix, E.O. and Ademiju, O. and Tayyeb, M. and Noibi, T.O. and Tanimowo, A. and Khadka, R.B. and Rhino, A. and Yildiz, R. and Khuzaiyah, S. and Yildirim, M.S. and Solmaz, E. and Haylı, �.M. and �ENGAN, A. and AKTURK, B. and Hossen, M. and Hweissa, N. and Gengatharan, K. and Kumar, V. and Ramazanzadegan, K. and Nuraliyeva, Z. and Muçaj, S. (2023) Attitudes of different religions towards breast milk bank: Analysis of 17 countries with data mining. Women's Studies International Forum, 101.

Liaw, K.L. and Kurnia, J.C. and Lai, W.K. and Ong, K.C. and Zar, M.A.B.M.A. and Muhammad, M.F.B. and Firmansyah (2023) Optimization of a novel impulse gas turbine nozzle and blades design utilizing Taguchi method for micro-scale power generation. Energy, 282.

Nawaz, R. and Haider, S. and Anjum, M. and Haneef, T. and Oad, V.K. and Aqif, M. and Haider, A. and Khan, R. (2023) Photodegrading hazardous pollutants using black TiO2 materials with different morphology and estimation of energy requirement. Materials Chemistry and Physics, 309.

Liao, J. and Yang, D. and Arshad, N.I. and Venkatachalam, K. and Ahmadian, A. (2023) MEMS: An automated multi-energy management system for smart residences using the DD-LSTM approach. Sustainable Cities and Society, 98.

Ziyada, A.K. and Osman, A. and Elbashir, A.A. and Rajab, F. and Khan, A.M. and Omar, M.M.A. and Wilfred, C.D. (2023) Effect of allyl, benzyl, and hydroxyl groups on the CO2 absorption capacity of propanenitrile imidazolium�based ionic liquids incorporating dioctylsulfosuccinate anion. Ionics, 29 (11). pp. 4659-4667.

Shelare, S.D. and Belkhode, P.N. and Nikam, K.C. and Jathar, L.D. and Shahapurkar, K. and Soudagar, M.E.M. and Veza, I. and Khan, T.M.Y. and Kalam, M.A. and Nizami, A.-S. and Rehan, M. (2023) Biofuels for a sustainable future: Examining the role of nano-additives, economics, policy, internet of things, artificial intelligence and machine learning technology in biodiesel production. Energy, 282.

Sa'adah, N. and Arokiasamy, L. (2023) A qualitative study on the urgency of attitude in designing effective procurement certification training. Journal of High Technology Management Research, 34 (2).

Leong, W.H. and Lim, J.W. and Rawindran, H. and Liew, C.S. and Lam, M.K. and Ho, Y.C. and Khoo, K.S. and Kusakabe, K. and Abdelghani, H.T.M. and Ho, C.-D. and Ng, H.-S. and Usman, A. and Kang, H.-S. (2023) Energy balance and life cycle assessments in producing microalgae biodiesel via a continuous microalgal-bacterial photobioreactor loaded with wastewater. Chemosphere, 341.

Khan, R. and Mourad, A.-H.I. and Seikh, A.H. and Petru, J. and H.Ya, H. (2023) Erosion impact on mild steel elbow pipeline for different orientations under liquid-gas-sand annular flow. Engineering Failure Analysis, 153.

Al-Sabaeei, A.M. and Alhussian, H. and Abdulkadir, S.J. and Jagadeesh, A. (2023) Prediction of oil and gas pipeline failures through machine learning approaches: A systematic review. Energy Reports, 10. pp. 1313-1338.

Prabhu, L. and Shenbagaraman, S. and Anbarasu, A. and Muniappan, A. and Suthan, R. and Veza, I. (2023) Prediction of the Engine Performance and Emission Characteristics of Glycine Max Biodiesel Blends With Nanoadditives and Hydrogen. Journal of Energy Resources Technology, Transactions of the ASME, 145 (11). ISSN 01950738

Sharma, K.V. and Talpa Sai, P.H.V.S. and Sharma, P. and Kanti, P.K. and Bhramara, P. and Akilu, S. (2023) Prognostic modeling of polydisperse SiO2/Aqueous glycerol nanofluids' thermophysical profile using an explainable artificial intelligence (XAI) approach. Engineering Applications of Artificial Intelligence, 126.

Iqbal, M. and Karuppanan, S. and Perumal, V. and Ovinis, M. and Nouman, H. (2023) Empirical modeling of stress concentration factors using finite element analysis and artificial neural networks for the fatigue design of tubular KT-joints under combined loading. Fatigue and Fracture of Engineering Materials and Structures, 46 (11). pp. 4333-4349.

Ahmed, A.A. and Saaid, I.M. and Sambo, C. and Mohd Shafian, S.R. and Hamza, M.F. (2023) Experimental investigation and numerical simulation of relative permeability modifiers during water shut-off. Geoenergy Science and Engineering, 230. ISSN 29498910

Rosli, M.A.F. and Ismael, M.A. and Aziz, A.R.A. and Mohammed, S.E. and A.B., O. and Opatola, R.A. (2023) Experimental study of Gas-To-Liquid (GTL) and diesel fuel blends evaporation behaviour and droplet lifetime through Leidenfrost effect. Energy Reports, 10. pp. 805-818.

Abd El Aal, A. and Abdullah, G.M.S. and Radwan, A.E. and Ali, S.H. and Wahid, A. and Shoukat, N. and Zakhera, M. and Moftah, H. (2023) Experimental study of the influence of the degree of saturation on physical and mechanical properties of carbonate rocks in the Jurassic Tuwaiq Mountain Formation (Saudi Arabia). Geological Journal, 58 (11). pp. 3970-3984.

Amin, A. and Rehman, M. and Basri, S. and Capretz, L.F. and Goraya, M.A.S. and Akbar, R. (2023) The impact of stressors on the relationship between personality traits, knowledge collection behaviour and programmer creativity intention in software engineering. Information and Software Technology, 163. ISSN 09505849

Husain, S.F. and Chiang, S.K. and Vasu, A.A. and Goh, C.P. and McIntyre, R.S. and Tang, T.B. and Tran, B.X. and Dang, T.H.T. and Nguyen, T.T. and Ho, R.C. and Ho, C.S. (2023) Functional Near-Infrared Spectroscopy of English-Speaking Adults With Attention-Deficit/Hyperactivity Disorder During a Verbal Fluency Task. Journal of Attention Disorders, 27 (13). pp. 1448-1459.

Mahmood Ali, A. and Khan, A. and Shahbaz, M. and Imtiaz Rashid, M. and Imran, M. and Shahzad, K. and Binti Mahpudz, A. (2023) A renewable and sustainable framework for clean fuel towards circular economy for solid waste generation in leather tanneries. Fuel, 351.

Marode, R.V. and Pedapati, S.R. and Lemma, T.A. and Loyte, A. and Devarajan, Y. and Thandavamoorthy, R. (2023) Influence of Silicon Carbide on Microhardness and Corrosion Behavior of AZ91/SiC Surface Composites Processed through Friction Stir Processing: Multi-Response Optimization Using Taguchi-Grey Relational Analysis. Silicon, 15 (16). pp. 6921-6943.

Kanthasamy, R. and Almatrafi, E. and Ali, I. and Hussain Sait, H. and Zwawi, M. and Abnisa, F. and Choe Peng, L. and Victor Ayodele, B. (2023) Biochar production from valorization of agricultural Wastes: Data-Driven modelling using Machine learning algorithms. Fuel, 351.

Kumar, V. and Kutty, S.R.M. and Abd Razak, S.N. and Shafiq, N. and Adebanjo, A. and Baloo, L. and Azougagh, A.-A. and Iseni, R. (2023) Exploring the untapped potentials of oily sludge ash blended with fly ash for geopolymer binder via waste valorisation approach. Journal of Hazardous Materials Letters, 4.

Waqar, A. and Othman, I. and Shafiq, N. and Mansoor, M.S. (2023) Applications of AI in oil and gas projects towards sustainable development: a systematic literature review. Artificial Intelligence Review, 56 (11). pp. 12771-12798. ISSN 02692821

Lai, Z.Y. and Yiin, C.L. and Lock, S.S.M. and Chin, B.L.F. and Zauzi, N.S.A. and Sar-ee, S. (2023) A review on natural based deep eutectic solvents (NADESs): fundamentals and potential applications in removing heavy metals from soil. Environmental Science and Pollution Research, 30 (55). pp. 116878-116905.

Toh, Y.P. and Bashir, M.J.K. and Guo, X. and Wong, L.P. and Ozturk, D. and Amr, S.S.A. and Lim, J.W. (2023) Advanced treatment of poultry slaughterhouse wastewater using electrocoagulation and peroxidation: parametric analysis and process optimization. International Journal of Environmental Science and Technology, 20 (11). pp. 12307-12322.

Ismail, I.S. and Othman, M.F.H. and Rashidi, N.A. and Yusup, S. (2023) Recent progress on production technologies of food waste�based biochar and its fabrication method as electrode materials in energy storage application. Biomass Conversion and Biorefinery, 13 (16). pp. 14341-14357.

Gadipudi, N. and Elamvazuthi, I. and Izhar, L.I. and Tiwari, L. and Hebbalaguppe, R. and Lu, C.-K. and Doss, A.S.A. (2023) A review on monocular tracking and mapping: from model-based to data-driven methods. Visual Computer, 39 (11). pp. 5897-5924.

Ali, S.A. and Khan, A.U. and Mulk, W.U. and Khan, H. and Nasir Shah, S. and Zahid, A. and Habib, K. and Shah, M.U.H. and Othman, M.H.D. and Rahman, S. (2023) An Ongoing Futuristic Career of Metal-Organic Frameworks and Ionic Liquids, A Magical Gateway to Capture CO2; A Critical Review. Energy and Fuels, 37 (20). pp. 15394-15428.

Mandal, D. and Elraies, K.A. and Jufar, S. (2023) New Mathematical Technique for Step Rate Test Analysis Aids Determination of Fracture Pressure and Overcomes the Uncertainty of Conventional Analysis. ACS Omega, 8 (41). pp. 38313-38329.

Kumar, S. and Regassa Jufar, S. and Kumar, S. and Foroozesh, J. and Kumari, S. and Bera, A. (2023) Underground hydrogen storage and its roadmap and feasibility in India toward Net-Zero target for global decarbonization. Fuel, 350.

Kanthasamy, R. and Almatrafi, E. and Ali, I. and Hussain Sait, H. and Zwawi, M. and Abnisa, F. and Choe Peng, L. and Victor Ayodele, B. (2023) Bayesian optimized multilayer perceptron neural network modelling of biochar and syngas production from pyrolysis of biomass-derived wastes. Fuel, 350.

Musa Ardo, F. and Shiong Khoo, K. and Min Woon, J. and Tasnim Sahrin, N. and Fong Yeong, Y. and Ng, H.-S. and Sean Goh, P. and Dina Setiabudi, H. and Kiatkittipong, W. and Wei Lim, J. and Ikenaga, K. and Ansar, S. (2023) Green hydrogen derived from municipal wastewater via bioconversion by attached microalgae onto various sizes of polyurethane foam cubes. Fuel, 350.

Yeong, M.K. and Ho, E.T.W. (2023) Recurrent neural network implementation of digital integrated circuits to mitigate challenges in design verification. Review of Computer Engineering Research, 10 (3). pp. 122-135. ISSN 24109142

Ibrahim, M.A. and Jaafar, M.Z. and Yusof, M.A.M. and Shye, C.A. and Idris, A.K. (2023) Influence of size and surface charge on the adsorption behaviour of silicon dioxide nanoparticles on sand particles. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 674.

Nawaz, R. and Ullah, H. and Ghanim, A.A.J. and Irfan, M. and Anjum, M. and Rahman, S. and Ullah, S. and Abdel Baki, Z. and Kumar Oad, V. (2023) Green Synthesis of ZnO and Black TiO2 Materials and Their Application in Photodegradation of Organic Pollutants. ACS Omega, 8 (39). pp. 36076-36087.

Islam, M.M. and Babikir, I. and Elsaadany, M. and Elkurdy, S. and Siddiqui, N.A. and Akinyemi, O.D. (2023) Application of a Pre-Trained CNN Model for Fault Interpretation in the Structurally Complex Browse Basin, Australia. Applied Sciences (Switzerland), 13 (20).

Saif, Y. and Rus, A.Z.M. and Yusof, Y. and Ahmed, M.L. and Al-Alimi, S. and Didane, D.H. and Adam, A. and Gu, Y.H. and Al-masni, M.A. and Abdulrab, H.Q.A. (2023) Advancements in Roundness Measurement Parts for Industrial Automation Using Internet of Things Architecture-Based Computer Vision and Image Processing Techniques. Applied Sciences (Switzerland), 13 (20).

Qasim, M. and Ayoub, M. and Singh, K. and Inayat, A. and Shamsuddin, R. and Danish, M. and Farrukh, S. (2023) A Comparative Study of Eggshell and Commercial Sorbent-Based Catalysts through Synthesis and Characterization for SESR Process. Sustainability (Switzerland), 15 (20). ISSN 20711050

Nordin, S.M. and Lohana, S. and Abd Razak, S.N. and Kumar, V. and Abdul Rashid, R. and Ahmad Rizal, A.R. and Atmadji, E. (2023) Identification of Opportunities for Espousing Green Fertilizers Technology Among Smallholder Paddy Farmers for Higher Productivity and Environmental Sustenance. SAGE Open, 13 (4).

Salleh, P.A.K.M. and Ibrahim, T. and Nor, N.M. and Kannan, R. and Rahman, M.Z. (2023) Development of Converter for Linear Wave Energy Stabilizer by Replacing the Inductor Type from the Existing Modified SEPIC Circuit. Journal of Advanced Research in Applied Mechanics, 110 (1). pp. 97-111.

Mokhtar, M. and Kasim, A.R.M. and Waini, I. and Nordin, N.S. and Sakidin, H. and Sukri, A. and Adytia, D. (2023) Combined Convective Transport of Williamson Hybrid Nanofluid over a Shrinking Sheet. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 110 (2). pp. 219-235.

Kho, Y.B. and Jusoh, R. and Sheremet, M. and Salleh, M.Z. and Ismail, Z. and Zainuddin, N. (2023) Unsteady Hiemenz Flow of Cu-SiO2 Hybrid Nanofluid with Heat Generation/Absorption. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 110 (2). pp. 95-107.

Lahimer, A.A. and Razak, A.A. and Sopian, K. (2023) Mathematical Modeling and Validation of Solar-Induced Ventilation System for Vehicle Cabin Cooling in Hot Parking Conditions. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 110 (1). pp. 200-226.

Kim Pham, C. and Chong, S.L. and Wan, R. (2023) A Phenomenographic Research Study of Students� Conceptions of Silence in Face-to-Face English as a Foreign Language Learning. SAGE Open, 13 (4). ISSN 21582440

Jafar, S.H. and Akhtar, S. and El-Chaarani, H. and Khan, P.A. and Binsaddig, R. (2023) Forecasting of NIFTY 50 Index Price by Using Backward Elimination with an LSTM Model. Journal of Risk and Financial Management, 16 (10). ISSN 19118074

Khan, M.M.H. and Mustafa, M.R.U. and Hossain, M.S. and Shams, S. and Julius, A.D. (2023) Short-Term and Long-Term Rainfall Forecasting Using ARIMA Model. International Journal of Environmental Science and Development, 14 (5). pp. 292-298.

Hussain Shah, S.M. and Yassin, M.A. and Abba, S.I. and Lawal, D.U. and Hussein Al-Qadami, E.H. and Teo, F.Y. and Mustaffa, Z. and Aljundi, I.H. (2023) Flood Risk and Vulnerability from a Changing Climate Perspective: An Overview Focusing on Flash Floods and Associated Hazards in Jeddah. Water (Switzerland), 15 (20).

Ab Rahim, A.H. and Yunus, N.M. and Bustam, M.A. (2023) Ionic Liquids Hybridization for Carbon Dioxide Capture: A Review. Molecules, 28 (20).

Maghami, M.R. and Pasupuleti, J. and Ling, C.M. (2023) Comparative Analysis of Smart Grid Solar Integration in Urban and Rural Networks. Smart Cities, 6 (5). pp. 2593-2618.

Dol, S.S. and Wee, S.K. and Yong, T.H. and Sulaiman, S.A. (2023) The Effects of Flexible Cylinder Structural Dynamics to the near Wake Turbulence. Fluids, 8 (10).

Fatima, S.S. and Borhan, A. and Ayoub, M. and Ghani, N.A. (2023) Modeling of CO2 Adsorption on Surface-Functionalized Rubber-Seed Shell Activated Carbon: Isotherm and Kinetic Analysis. Processes, 11 (10).

Kumar, R. and Hassan, M.F. and Adnan, M.H.M. (2023) Model of an Intelligent and Automated Negotiation Agent for the Service Level Agreement Negotiation Process in Cloud Computing. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (2). pp. 189-202.

Saif-ur-Rehman and Shozab Mehdi, M. and Fakhar-e-Alam, M. and Asif, M. and Rehman, J. and A. Alshgari, R. and Jamal, M. and Uz Zaman, S. and Umar, M. and Rafiq, S. and Muhammad, N. and Fawad, J.B. and Shafiee, S.A. (2023) Deep Eutectic Solvent Coated Cerium Oxide Nanoparticles Based Polysulfone Membrane to Mitigate Environmental Toxicology. Molecules, 28 (20).

Humayun, M.A. and Shuja, J. and Abas, P.E. (2023) Speaker Profiling Based on the Short-Term Acoustic Features of Vowels. Technologies, 11 (5).

Jiwa, M.Z. and Kim, Y.T. and Mustaffa, Z. and Kim, S. and Kim, D.K. (2023) A Simplified Approach for Predicting Bend Radius in HDPE Pipelines during Offshore Installation. Journal of Marine Science and Engineering, 11 (10).

Alotaibi, F. and Al-Dhaqm, A. and Al-Otaibi, Y.D. (2023) A Conceptual Digital Forensic Investigation Model Applicable to the Drone Forensics Field. Engineering, Technology and Applied Science Research, 13 (5). pp. 11608-11615.

Bilema, M. and Yuen, C.W. and Alharthai, M. and Al-Saffar, Z.H. and Al-Sabaeei, A. and Yusoff, N.I.M. (2023) A Review of Rubberised Asphalt for Flexible Pavement Applications: Production, Content, Performance, Motivations and Future Directions. Sustainability (Switzerland), 15 (19).

Dzulkefli, F.S. and Abdul Latiff, A.H. and Hashim, H.S. and Majdi, A.M. and Rusmanugroho, H. and Li, J. (2023) Unveiling Accurate Seismic Imaging through the Advanced Target-Oriented Kirchhoff Migration Method. Applied Sciences (Switzerland), 13 (19).

Hassan, N.H. and Arshad, N.I. (2023) Information technology personnel competency towards organizational agility: Study at Malaysia automotive. Indonesian Journal of Electrical Engineering and Computer Science, 32 (1). pp. 312-317. ISSN 25024752

Barakat, B. and Milhem, M. and Naji, G.M.A. and Alzoraiki, M. and Muda, H.B. and Ateeq, A. and Abro, Z. (2023) Assessing the Impact of Green Training on Sustainable Business Advantage: Exploring the Mediating Role of Green Supply Chain Practices. Sustainability (Switzerland), 15 (19).

Kircher, M. and Roschger, M. and Koo, W.Y. and Blaschke, F. and Grandi, M. and Bodner, M. and Hacker, V. (2023) Effects of Catalyst Ink Storage on Polymer Electrolyte Fuel Cells. Energies, 16 (19).

Boushara, R.S.H. and Abdul Rahim, A.R. and Johari, K. and Rabat, N.E. and Khan, A.S. and Saman, N. (2023) Effect of various solvents on the structure of silica nanocapsules synthesised for anionic and cationic dyes adsorption from aqueous solution. Journal of Environmental Chemical Engineering, 11 (5).

Shoukat, N. and Ali, S.H. and Siddiqui, N.A. and Wahid, A. and Bashir, Y. (2023) Diagenesis and sequence stratigraphy of Miocene, Nyalau Formation, Sarawak, Malaysia: A case study for clastic reservoirs. Kuwait Journal of Science, 50 (4). pp. 790-802.

Majid, M.F. and Mohd Zaid, H.F. and Abd Shukur, M.F. and Ahmad, A. and Jumbri, K. (2023) Physicochemical properties and density functional theory calculation of octahedral UiO-66 with Bis(Trifluoromethanesulfonyl)imide ionic liquids. Heliyon, 9 (10).

Ho, N.T.T. and Abdullah, M.R.T.L. and Idrus, H.B. and Sivapalan, S. and Pham, H.-H. and Dinh, V.-H. and Pham, H.K. and Nguyen, L.T.M. (2023) Acceptance Toward Coursera MOOCs Blended Learning: A Mixed Methods View of Vietnamese Higher Education Stakeholders. SAGE Open, 13 (4). ISSN 21582440

Hamidi, S.R. and Ismail, M.A. and Mohamed Shuhidan, S. and Abd Kadir, S. (2023) Corporate Reputation in Industry 4.0: A Systematic Literature Review and Bibliometric Analysis. SAGE Open, 13 (4). ISSN 21582440

Khor, W.H. and Goh, J.H. and Yew, Q.M. and Kang, H.-S. and Lim, J.-W. and Iwamoto, K. and Tang, C.H.-H. and Lee, K.-Q. and Wu, Y.-T. and Goh, P.S. (2023) Residence time distribution of an offshore floating photobioreactor under hydrodynamic sloshing effect. Chemical Engineering Research and Design, 198. pp. 340-348.

Adamu, H. and Bello, U. and Yuguda, A.U. and Tafida, U.I. and Jalam, A.M. and Sabo, A. and Qamar, M. (2023) Production processes, techno-economic and policy challenges of bioenergy production from fruit and vegetable wastes. Renewable and Sustainable Energy Reviews, 186.

Muhammad Wajahat ul Hasnain, S. and Salam Farooqi, A. and Singh, O. and Hidayah Ayuni, N. and Victor Ayodele, B. and Abdullah, B. (2023) Response surface optimization of hydrogen-rich syngas production by the catalytic valorization of greenhouse gases (CH4 and CO2) over Sr-promoted Ni/SBA-15 catalyst. Energy Conversion and Management: X, 20.

Thakre, S. and Pandhare, A. and Malwe, P.D. and Gupta, N. and Kothare, C. and Magade, P.B. and Patel, A. and Meena, R.S. and Veza, I. and L, Natrayan and Panchal, H. (2023) Heat transfer and pressure drop analysis of a microchannel heat sink using nanofluids for energy applications. Kerntechnik, 88 (5). pp. 543-555. ISSN 09323902

Ahmed, M.I.I. and Baharom, M. and Aziz, A.R.A. (2023) The Effect of Curve Cylinder Liner on in-Cylinder Tumble Flow Motion Characteristic using CFD Port Flow Simulation. CFD Letters, 15 (10). pp. 186-205.

Haque, M.A. and Zakariya, M.A. and Al-Bawri, S.S. and Yusoff, Z. and Islam, M. and Saha, D. and Abdulkawi, W.M. and Rahman, M.A. and Paul, L.C. (2023) Quasi-Yagi antenna design for LTE applications and prediction of gain and directivity using machine learning approaches. Alexandria Engineering Journal, 80. pp. 383-396.

Rasangika, A.H.D.K. and Nasif, M.S. and Pao, W. and Al-Waked, R. (2023) CFD Investigation of the Effect of Vibration Direction on the Heat Transfer Enhancement of Heat Sink. CFD Letters, 15 (10). pp. 170-185.

Jeon, J. and Suvitha, K. and Arshad, N.I. and Kalaiselvan, S. and Narayanamoorthy, S. and Ferrara, M. and Ahmadian, A. (2023) A probabilistic hesitant fuzzy MCDM approach to evaluate India's intervention strategies against the COVID-19 pandemic. Socio-Economic Planning Sciences, 89.

Isah, A.S. and Takaijudin, H.B. and Mahinder Singh, B.S. and Abubakar, U.A. and Mohammad, S.J. and Oladoyin abimbola, T. (2023) Assessing the performance, sustainability, and economic viability of a photovoltaic-based solar desalination system for water scarce regions. Journal of Cleaner Production, 421.

Leong, W.H. and Rawindran, H. and Ameen, F. and Alam, M.M. and Chai, Y.H. and Ho, Y.C. and Lam, M.K. and Lim, J.W. and Tong, W.-Y. and Bashir, M.J.K. and Ravindran, B. and Alsufi, N.A. (2023) Advancements of microalgal upstream technologies: Bioengineering and application aspects in the paradigm of circular bioeconomy. Chemosphere, 339.

Nagamani Prabu, A. and Revathi, N. and Kumar, A. and Fatima, A. and Mohamed Abdulla, I. and Ubaidullah, M. and Pandit, B. and Kansal, L. and Payal, H. and Janarthanan, B. and Yusuf, M. and Sehgal, S.S. (2023) Analysing the design, fabrication, and performance of a compact parabolic trough collector equipped with a shell-type receiver made from a variety of metals and introduced with single slope solar still. Journal of King Saud University - Science, 35 (7).

Ahmad, A. and Abbas, A. and Hussain, G. and Al-Abbasi, O. and Alkahtani, M. and Altaf, K. (2023) Performance evaluation of 3D printed polymer heat exchangers: influence of printing temperature, printing speed and wall thickness with consideration of surface roughness. International Journal of Advanced Manufacturing Technology, 128 (7-8). pp. 3627-3647.

Filho, W.L. and Salvia, A.L. and Balogun, A.-L. and Pereira, M.J.V. and Mucova, S.A.R. and Ajulo, O.M. and Ng, A. and Gwenzi, J. and Mashonjowa, E. and Aina, Y.A. and Li, C. and Totin, E. and Pinho, P. and Campbell, D. and Chanza, N. and Setti, A.F.F. (2023) Towards more sustainable responses to natural hazards and climate change challenges via transformative adaptation. Cities, 141.

Bani-Melhem, K. and Elektorowicz, M. and Tawalbeh, M. and Al Bsoul, A. and El Gendy, A. and Kamyab, H. and Yusuf, M. (2023) Integrating of electrocoagulation process with submerged membrane bioreactor for wastewater treatment under low voltage gradients. Chemosphere, 339.

Remesh, S. and Vasudevan, M. and Perumal, V. and Ovinis, M. and Karuppanan, S. and Edison, T.N.J.I. and Raja, P.B. and Ibrahim, M.N.M. and Voon, C.H. and Arumugam, N. and Kumar, R.S. (2023) Oil palm lignin-derived laser scribed graphene in neutral electrolyte for high-performance microsupercapacitor application. Journal of Environmental Chemical Engineering, 11 (5).

Jagaba, A.H. and Lawal, I.M. and Ghfar, A.A. and Usman, A.K. and Yaro, N.S.A. and Noor, A. and Abioye, K.J. and Birniwa, A.H. (2023) Biochar-based geopolymer nanocomposite for COD and phenol removal from agro-industrial biorefinery wastewater: Kinetic modelling, microbial community, and optimization by response surface methodology. Chemosphere, 339.

Nisa, Z.U. and Chuan, L.K. and Guan, B.H. and Ahmad, F. and Ayub, S. (2023) Coconut shell char-based nanocomposites of polyamide-6: An investigation of thermal, morphological, and crystalline properties. Diamond and Related Materials, 138.

Mustafa, S.F.Z. and Mat Deris, M. and Abd Manan, T.S.B. and Beddu, S. and Mohd Kamal, N.L. and Mohamad, D. and Yavari, S. and Qazi, S. and Hanafiah, Z. and Omar Abu Nassar, S. and Yeoh, K.L. and Sheriff, I. and Wan Mohtar, W.H.M. and Isa, M.H. and Yusoff, M.S. and Abdul Aziz, H. (2023) Modelling of similarity characteristics of polycyclic aromatic hydrocarbons (PAHs) in Sungai Perak, Malaysia via rough set theory and principal component analysis (PCA). Chemical Physics Letters, 828.

Ahmad Sobri, M.Z. and Khoo, K.S. and Sahrin, N.T. and Ardo, F.M. and Ansar, S. and Hossain, M.S. and Kiatkittipong, W. and Lin, C. and Ng, H.-S. and Zaini, J. and Bilad, M.R. and Lam, M.K. and Lim, J.W. (2023) Kinetic model derived from machine learning for accurate prediction of microalgal hydrogen production via conversion from low thermally pre-treated palm kernel expeller waste. Chemosphere, 338.

Amosa, T.I. and Sebastian, P. and Izhar, L.I. and Ibrahim, O. and Ayinla, L.S. and Bahashwan, A.A. and Bala, A. and Samaila, Y.A. (2023) Multi-camera multi-object tracking: A review of current trends and future advances. Neurocomputing, 552.

Quddus, A. and Shah, A. and Rasheed Qureshi, K. and Tahir, A. and ul Mustafa, R. and Samee, A. (2023) Numerical study on effects of nozzle hole spacing distance on steam submerged jet condensation from triangular holes spray nozzle. Applied Thermal Engineering, 233.

Haruna, A. and Merican, Z.M.A. and Rahman, M.B.A. and Musa, S.G. and Al-Yaari, A. (2023) Fabrication of PW11Zn@MOF-808 and its catalytic activity for oxidative desulfurization of fuel oil: Kinetics, thermodynamics and mechanism. Journal of Solid State Chemistry, 326.

Ahmed, H.J.A. and Azad, A.S.M.S. and Poon, W.C. and Safiullah, M. (2023) Is there a CSI-leverage nexus? International Review of Financial Analysis, 89. ISSN 10575219

Maray, M. and Mustafa, E. and Shuja, J. and Bilal, M. (2023) Dependent task offloading with deadline-aware scheduling in mobile edge networks. Internet of Things (Netherlands), 23.

Shamsuri, N.A. and Rojudi, Z.E. and Vicxeant, V.T. and Noor, I.M. and Kadir, M.F.Z. and Shukur, M.F. (2023) Plasticized lithium iodide-doped polyacrylonitrile-methylcellulose blend electrolytes for supercapacitor application. Ionics, 29 (10). pp. 4243-4252.

Tong, W.Y. and Tan, W.-N. and Kamarul Azizi, M.A. and Leong, C.R. and El Azab, I.H. and Lim, J.W. and Mahmoud, M.H.H. and Dailin, D.J. and Ibrahim, M.M. and Chuah, L.F. (2023) Nanoparticle-laden contact lens for controlled release of vancomycin with enhanced antibiotic efficacy. Chemosphere, 338.

Ziyada, A.K. and Osman, A. and Elbashir, A.A. and Rajab, F. and Khan, A.M. and Omar, M.M.A. and Wilfred, C.D. (2023) Impact of nitrile incorporated with hydroxyl, benzyl, and allyl on physicochemical properties of propanenitrile imidazolium-based dual functionalized ionic liquids. Ionics, 29 (10). pp. 4067-4076.

Athar, M. and Nawaz, M. and Nadeem, H. and Rashid, M.I. and Umer, A. and Iqbal, J. and Aadil, M.A. (2023) Catalytic Ozonation in Pulp and Paper Industry Wastewater Treatment: A Bibliometric Analysis. ChemBioEng Reviews, 10 (5). pp. 756-778.

Rather, S.-U. and Sulaimon, A.A. and Shariff, A.M. and Qasim, A. and Bamufleh, H.S. and Alhumade, H.A. and Saeed, U. and Al-Alayah, W. (2023) Investigation of physical properties and carbon dioxide solubility in tetramethylammonium bromide and tetraethylammonium bromide ionic liquids solutions. Chemosphere, 337.

Baena, J.C. and Wang, C. and Kabir, I.I. and Khalid, A. and Nazir, M.T. and Yuen, A.C.Y. and Ahmad, F. and Yeoh, G.H. (2023) Fire behaviour of waterborne intumescent coatings on timber substrate for bushfire exposure. Fire Safety Journal, 140.

Al-Masoodi, A.H.H. and Abbas, Y.M. and Alkhatib, F. and Khan, M.I. and Shafiq, N. and ElGawady, M. (2023) Aerodynamic optimization for corner modification of octagonal-shape tall buildings using computational approach. Journal of Building Engineering, 76.

Khoo, C.G. and Hirose, Y. and Matsumura, Y. and Lam, M.K. and Tan, I.S. and Lee, K.T. (2023) Valorisation of Chlorella vulgaris biomass for multi-products synthesis via hydrothermal processing. Energy Conversion and Management: X, 20.

Tan, N.N. and Ng, Q.H. and Enche Ab Rahim, S.K. and Ahmad, A.L. and Hoo, P.Y. and Chew, T.L. (2023) Synthesis of novel magneto-hybrid polyoxometalate composite membrane with simultaneous photocatalytic self-cleaning and antifouling functionalities. Frontiers of Chemical Science and Engineering, 17 (10). pp. 1450-1459.

Ali, A.M. and Shahbaz, M. and Inayat, M. and Shahzad, K. and Al-Zahrani, A.A. and Mahpudz, A.B. (2023) Conversion of municipals waste into syngas and methanol via steam gasification using CaO as sorbent: An Aspen Plus modelling. Fuel, 349.

Alaloul, W.S. and Heng, L.J. and Qureshi, A.H. (2023) Last Planner System (LPS) Themed Framework for Effective Application of Industrialized Building System (IBS). Arabian Journal for Science and Engineering, 48 (10). pp. 13377-13393. ISSN 2193567X

Hannan Qureshi, A. and Salah Alaloul, W. and Kai Wing, W. and Saad, S. and Ali Musarat, M. and Ammad, S. and Farouk Kineber, A. (2023) Automated progress monitoring technological model for construction projects. Ain Shams Engineering Journal, 14 (10).

Al-Aidrous, A.-H.M.H. and Shafiq, N. and Rahmawati, Y. and Mohammed, B.S. and Al-Ashmori, Y.Y. and Baarimah, A.O. and Alawag, A.M. (2023) Major blocking factors affecting the application of industrialized building system. Ain Shams Engineering Journal, 14 (10).

Maqsoom, A. and Ali Musarat, M. and Mubbasit, H. and Salah Alaloul, W. and Ashraf, H. and Babar Ali Rabbani, M. and Shaheen, I. (2023) Extrinsic workforce diversity factors: An impact of employee characteristics on productivity. Ain Shams Engineering Journal, 14 (10).

Shukla, S. and Hassan, M.F. and Tran, D.C. and Akbar, R. and Paputungan, I.V. and Khan, M.K. (2023) Improving latency in Internet-of-Things and cloud computing for real-time data transmission: a systematic literature review (SLR). Cluster Computing, 26 (5). pp. 2657-2680.

Huo, J. and Jin, L. and Chen, C. and Chen, D. and Xu, Z. and Wilfred, C.D. and Xu, Q. and Lu, J. (2023) Improving the Sulfurophobicity of the NiS-Doping CoS Electrocatalyst Boosts the Low-Energy-Consumption Sulfide Oxidation Reaction Process. ACS Applied Materials and Interfaces, 15 (37). pp. 43976-43984.

Hoang, A.T. and Pandey, A. and Lichtfouse, E. and Bui, V.G. and Veza, I. and Nguyen, H.L. and Nguyen, X.P. (2023) Green hydrogen economy: Prospects and policies in Vietnam. International Journal of Hydrogen Energy, 48 (80). pp. 31049-31062.

Rawindran, H. and Khoo, K.S. and Ethiraj, B. and Suparmaniam, U. and Leong, W.H. and Raksasat, R. and Liew, C.S. and Sahrin, N.T. and Lam, M.K. and Kiatkittipong, W. and Lim, J.W. and Zango, Z.U. and Shahid, M.K. and Abdelghani, H.T.M. and Ng, H.-S. (2023) Fundamental alteration of cellular biochemicals from attached microalgae onto palm kernel expeller waste upon optimizing the growth environment in forming adhesion complex. Environmental Research, 233.

Rana, M.M. and Uddin, M. and Sarkar, M.R. and Meraj, S.T. and Shafiullah, G.M. and Muyeen, S.M. and Islam, M.A. and Jamal, T. (2023) Applications of energy storage systems in power grids with and without renewable energy integration � A comprehensive review. Journal of Energy Storage, 68. ISSN 2352152X

Veza, I. and Setiawan, I.C. and Firman, L.O.M. and Handi and Amanah, A. and Kurnia, M.T. and Paristiawan, P.A. and Idris, M. and Sule, A. and Opia, A.C. (2023) Strategies to achieve controlled auto-ignition (CAI) combustion: A review. Mechanical Engineering for Society and Industry, 3 (1). pp. 22-34. ISSN 27985245

Ding, S.H. and Oh, P.C. and Mukhtar, H. and Jamil, A. (2023) Nucleophilic substituted NH2-MIL-125 (Ti)/polyvinylidene fluoride hollow fiber mixed matrix membranes for CO2/CH4 separation and CO2 permeation prediction via theoretical models. Journal of Membrane Science, 681.

Mesri, M. and Shamsudin, Z. and Dom, A.H.M. and Hassan, R. and Mulyadi, M. (2023) EXPERIMENTAL AND VALIDATION OF GLASS-CERAMIC COMPOSITE PROPERTIES DERIVED FROM WASTE MATERIALS AT ELEVATED SINTERING TEMPERATURE. Journal of Advanced Manufacturing Technology, 17 (3).

Alam, M.A. and Ya, H.H. and Qistina, N.A. and Azeem, M. and Mustapha, M. and Yusuf, M. and Masood, F. and Khan, R. and Ahmad, T. (2023) Investigating the Microhardness Behavior of Al6061/TiC Surface Composites Produced by Friction Stir Processing. International Journal of Computational Methods and Experimental Measurements, 11 (3). pp. 157-161.

Awang Ahmad, M.Z. and Nurudin, S.M. and Anuar, A. and Yob, M.S. and Omar, M.A. (2023) Failure of 24 Inches Blowdown Tower Inlet Nozzle Due to Cyclic Surge Forces. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (2). pp. 79-85. ISSN 22897879

Abdullahi, M.B. and Jufar, S.R. and Lee, J.H. and Al-Shami, T.M. and Le, M.D. and Kwon, S. (2023) Pore Pressure Diffusion Waves Transmission in Oil Reservoir. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (2). pp. 49-65.

Arshed, M.A. and Alwadain, A. and Faizan Ali, R. and Mumtaz, S. and Ibrahim, M. and Muneer, A. (2023) Unmasking Deception: Empowering Deepfake Detection with Vision Transformer Network. Mathematics, 11 (17).

Halim, N.H. and Saaid, I.M. and Panuganti, S.R. (2023) Demulsifier Selection Guideline for Destabilizing Water-in-Oil Emulsion for both non-EOR and EOR Application. Substantia, 7 (2). pp. 21-33. ISSN 25323997

Rajan, H. and Yusuf, N.R. and Mohsim, D.F. and Halim, N.H.B. (2023) Chemical Demulsification of Oil-in-Water Emulsion from Gas Condensate Field. Substantia, 7 (2). pp. 7-19. ISSN 25323997

Al-Aasam, A.B. and Ibrahim, A. and Syafiq, U. and Sopian, K. and Abdulsahib, B.M. and Dayer, M. (2023) Enhancing the performance of water-based PVT collectors with nano-PCM and twisted absorber tubes. International Journal of Renewable Energy Development, 12 (5). pp. 891-901.

Nesan, K.P. and Buang, A. and Kaniapan, S. and Zaini, D. and Nesan, V.P. and Razal, M.J.M. (2023) A Holistic Team Approach (HTA) Model to Curb Machinery Accidents in Power Plants. Journal of Scientific and Industrial Research, 82 (9). pp. 947-955.

Al-Shatari, M. and Hussin, F.A. and Aziz, A.A. and Eisa, T.A.E. and Tran, X.-T. and Dalam, M.E.E. (2023) IoT Edge Device Security: An Efficient Lightweight Authenticated Encryption Scheme Based on LED and PHOTON. Applied Sciences (Switzerland), 13 (18).

Suleiman, A.A. and Daud, H. and Singh, N.S.S. and Ishaq, A.I. and Othman, M. (2023) A New Odd Beta Prime-Burr X Distribution with Applications to Petroleum Rock Sample Data and COVID-19 Mortality Rate. Data, 8 (9).

Musarat, M.A. and Irfan, M. and Alaloul, W.S. and Maqsoom, A. and Ghufran, M. (2023) A Review on the Way Forward in Construction through Industrial Revolution 5.0. Sustainability (Switzerland), 15 (18).

Mamman, H. and Balogun, A.O. and Basri, S. and Capretz, L.F. and Adeyemo, V.E. and Imam, A.A. and Kumar, G. (2023) Software Requirement Risk Prediction Using Enhanced Fuzzy Induction Models. Electronics (Switzerland), 12 (18).

Salleh, S.F. and Suleiman, A.A. and Daud, H. and Othman, M. and Sokkalingam, R. and Wagner, K. (2023) Tropically Adapted Passive Building: A Descriptive-Analytical Approach Using Multiple Linear Regression and Probability Models to Predict Indoor Temperature. Sustainability (Switzerland), 15 (18). ISSN 20711050

Marode, R.V. and Awang, M. and Janga, V.S.R. (2023) Computational Modelling and Comparative Analysis of Friction Stir Welding and Stationary Shoulder Friction Stir Welding on AA6061. Crystals, 13 (9).

Mihoob, M.M. and Albarody, T.M.B. and Ahmad, F. and Alnarabiji, M.S. (2023) Optimizing the Thermal Spray Parameters for Producing High-Performance Mo/ZrB2 Metal Matrix Composites Using the Taguchi Method. Coatings, 13 (9).

Rasool, M.H. and Ahmad, M. (2023) Reactivity of Basaltic Minerals for CO2 Sequestration via In Situ Mineralization: A Review. Minerals, 13 (9).

Maheshwari, V.C. and Osman, N.A. and Aziz, N. (2023) A Hybrid Approach Adopted for Credit Card Fraud Detection Based on Deep Neural Networks and Attention Mechanism. Journal of Advanced Research in Applied Sciences and Engineering Technology, 32 (1). pp. 315-331.

Garba, E. and Abdul-Rani, A.M. and Yunus, N.A. and Aliyu, A.A.A. and Gul, I.A. and Al-Amin, M. and Aliyu, R. (2023) A Review of Electrode Manufacturing Methods for Electrical Discharge Machining: Current Status and Future Perspectives for Surface Alloying. Machines, 11 (9).

Yousufi, M.M. and Dzulkarnain, I.B. and Elhaj, M.E.M. and Ahmed, S. (2023) A Perspective on the Prospect of Pickering Emulsion in Reservoir Conformance Control with Insight into the Influential Parameters and Characterization Techniques. Processes, 11 (9).

Fawwaz, M.A. and Bingi, K. and Ibrahim, R. and Devan, P.A.M. and Prusty, B.R. (2023) Design of PIDDα Controller for Robust Performance of Process Plants. Algorithms, 16 (9).

Rozaini, M.T. and Grekov, D.I. and Bustam, M.A. and Pré, P. (2023) Shaping of HKUST-1 via Extrusion for the Separation of CO2/CH4 in Biogas. Separations, 10 (9).

Venkata Pavan Kumar, Y. and Naga Venkata Bramareswara Rao, S. and Kannan, R. (2023) Islanding Detection in Grid-Connected Urban Community Multi-Microgrid Clusters Using Decision-Tree-Based Fuzzy Logic Controller for Improved Transient Response. Urban Science, 7 (3).

Shahed, C.A. and Ahmad, F. and Günister, E. and Foudzi, F.M. and Ali, S. and Malik, K. and Harun, W.S.W. (2023) Antibacterial mechanism with consequent cytotoxicity of different reinforcements in biodegradable magnesium and zinc alloys: A review. Journal of Magnesium and Alloys, 11 (9). pp. 3038-3058.

Suleiman, A.A. and Othman, M. and Daud, H. and Abdullah, M.L. and Kadir, E.A. and Kane, I.L. and Husin, A. (2023) Forecasting the Volatility of Real Residential Property Prices in Malaysia: A Comparison of Garch Models. Real Estate Management and Valuation, 31 (3). pp. 20-31. ISSN 23005289

Najm, A.S. and Selvanathan, V. and Aljuwaya, T.M. and Sabri, L.S. and Jamal, M.S. and Abdullah Al-Zahrani, A. and Holi, A.M. and Jaber, I. and Al Ghamdi, A. and Amin, M.T. and Sopian, K. and Ismail, R.A. and Moria, H. and Bais, B. and Majdi, H.S. and Chowdhury, S. and Sultan, A.J. and Alhuzaymi, T.M. (2023) Recent progress in performance improvement strategies for quantum dot sensitization methods: Challenges, achievements, and future prospects. APL Materials, 11 (9). ISSN 2166532X

Malik, K. and Ahmad, F. and Yunus, N.A. and Nakato, T. and Mouri, E. and Dawood, S. and Memon, I.R. (2023) A new method of reinforcing graphene nanoplatelets in glass/epoxy composites: Eine neue Methode zur Verstärkung von Glas-/Epoxid-Verbundwerkstoffen mit Graphen-Nanoplättchen. Materialwissenschaft und Werkstofftechnik, 54 (9). pp. 1157-1166.

Janga, V.S.R. and Awang, M. (2023) The influence of coefficient of friction in thermal prediction of refill friction stir spot welding process of AA7075-T6: Einfluss des Reibungskoeffizienten auf die thermische Abschätzung des Nachfüllreibungs-Rührreibpunktschwei�prozesses von AA7075-T6. Materialwissenschaft und Werkstofftechnik, 54 (9). pp. 1068-1074. ISSN 09335137

Mohamednour, A.E.E. and Nordin, N.A.H.M. and Bilad, M.R. and Shafie, S.N.A. and Hizam, S.M. and Nawi, N.I.M. (2023) Quantifying the impact of silica hydrophilicity and loading on membrane surface properties through response surface methodology. Journal of Materials Science, 58 (35). pp. 13974-13993.

Saparin, M.A. and Mustapha, K.A. and Ismail, M.S. (2023) Biostratigraphy, organic petrography and carbon isotope chemostratigraphy of the Ordovician-Silurian black shales from the Northwestern Domain of Peninsular Malaysia. International Journal of Coal Geology, 277.

Al-Qadami, E.H.H. and Razi, M.A.M. and Damanik, W.S. and Mustaffa, Z. and Martinez-Gomariz, E. (2023) Understanding the Stability of Passenger Vehicles Exposed to Water Flows through 3D CFD Modelling. Sustainability (Switzerland), 15 (17).

Dharmowijoyo, D.B.E. and Cherchi, E. and Ahmad Termida, N. and Samsura, D.A.A. (2023) On the role of subjective well-being in mediating the relationship between spatiotemporal and health variables. Journal of Transport and Health, 32.

Zawawi, N.A.W.A. and Danyaro, K.U. and Liew, M.S. and Shawn, L.E. (2023) Environmental Sustainability and Efficiency of Offshore Platform Decommissioning: A Review. Sustainability (Switzerland), 15 (17).

Haque, M.A. and Saha, D. and Al-Bawri, S.S. and Paul, L.C. and Rahman, M.A. and Alshanketi, F. and Alhazmi, A. and Rambe, A.H. and Zakariya, M.A. and Ba Hashwan, S.S. (2023) Machine learning-based technique for resonance and directivity prediction of UMTS LTE band quasi Yagi antenna. Heliyon, 9 (9). ISSN 24058440

Al-Mekhlafi, A.-B.A. and Isha, A.S.N. and Al-Tahitah, A.N. and Kineber, A.F. and Al-Dhawi, B.N.S. and Ajmal, M. (2023) Modelling the Impact of Driver Work Environment on Driving Performance among Oil and Gas Heavy Vehicles: SEM-PLS. Safety, 9 (3).

Al-Jothery, H.K.M. and Albarody, T.M.B. and Sultan, N.M. and Mohammed, H.G. and Megat-Yusoff, P.S.M. and Almuramady, N. and AL-Nidawi, W.J.A. (2023) Sintering β-SiC nanopowder using novel microwave-current assisted sintering technique: preliminary study. Advances in Natural Sciences: Nanoscience and Nanotechnology, 14 (3).

Mulk, W.U. and Ali, S.A. and Shah, S.N. and Shah, M.U.H. and Zhang, Q.-J. and Younas, M. and Fatehizadeh, A. and Sheikh, M. and Rezakazemi, M. (2023) Breaking boundaries in CO2 capture: Ionic liquid-based membrane separation for post-combustion applications. Journal of CO2 Utilization, 75.

Bheel, N. and Mohammed, B.S. and Ali, M.O.A. and Shafiq, N. and Radu, D. (2023) Effect of graphene oxide as a nanomaterial on the bond behaviour of engineered cementitious composites by applying RSM modelling and optimization. Journal of Materials Research and Technology, 26. pp. 1484-1507.

Chohan, I.M. and Ahmad, A. and Sallih, N. and Bheel, N. and Ali, M. and Deifalla, A.F. (2023) A review on life cycle assessment of different pipeline materials. Results in Engineering, 19.

Hananto, A.L. and Fauzi, A. and Suhara, A. and Davison, I. and Spraggon, M. and Herawan, S.G. and Samuel, O.D. and Yusuf, A.A. and Idris, M. and Veza, I. (2023) Elman and cascade neural networks with conjugate gradient Polak-Ribière restarts to predict diesel engine performance and emissions fueled by butanol as sustainable biofuel. Results in Engineering, 19. ISSN 25901230

Ishak, M.A.A.B. and Ibrahim, A. and Fazlizan, A. and Fauzan, M.F. and Sopian, K. and Rahmat, A.A. (2023) Exergy performance of a reversed circular flow jet impingement bifacial photovoltaic thermal (PVT) solar collector. Case Studies in Thermal Engineering, 49. ISSN 2214157X

Al-Aasam, A.B. and Ibrahim, A. and Sopian, K. and Abdulsahib M, B. and Dayer, M. (2023) Nanofluid-based photovoltaic thermal solar collector with nanoparticle-enhanced phase change material (Nano-PCM) and twisted absorber tubes. Case Studies in Thermal Engineering, 49.

Chaiyasarn, K. and Buatik, A. and Mohamad, H. and Zhou, M. and Poovarodom, N. (2023) Defect Change Detection in Masonry Structures Using Image-Based 3D Photogrammetry. Journal of Architectural Engineering, 29 (3).

Chaiyasarn, K. and Poovarodom, N. and Ejaz, A. and Ng, A.W.M. and Hussain, Q. and Saingam, P. and Mohamad, H. and Joyklad, P. (2023) Influence of natural fiber rope wrapping techniques on the compressive response of recycled aggregate concrete circular columns. Results in Engineering, 19.

Shuhidan, S.M. and Lokman, A.M. and Hamidi, S.R. and Kadir, S.A. and Syahirah, S. and Alam, M.M. (2023) Unfolding emotions for creating happiness and quality of life in Malaysia's low-income community using text mining. Journal of Community and Applied Social Psychology, 33 (5). pp. 1078-1098.

Kazem, H.A. and Al-Waeli, A.A. and Chaichan, M.T. and Sopian, K. and Ahmed, A.-A. and Wan Nor Roslam, W.I. (2023) Enhancement of photovoltaic module performance using passive cooling (Fins): A comprehensive review. Case Studies in Thermal Engineering, 49. ISSN 2214157X

Khan, T. and Singh, K. and Shariq, M. and Ahmad, K. and Savita, K.S. and Ahmadian, A. and Salahshour, S. and Conti, M. (2023) An efficient trust-based decision-making approach for WSNs: Machine learning oriented approach. Computer Communications, 209. pp. 217-229.

Adamu, U.A. and Abu Bakar, N.H.H. and Zango, Z.U. and Sambudi, N.S. and Iqbal, A. and Hussin, M.H. and Hamidon, T.S. (2023) Low-temperature synthesis and characterization of porous chromium terephthalate MIL-101(Cr) and its photocatalytic degradation of phenanthrene. Korean Journal of Chemical Engineering, 40 (9). pp. 2239-2252. ISSN 02561115

Yusaidi, N.J. and Fauzan, M.F. and Ibrahim, A. and Jarimi, H. and Fazlizan, A. and Sopian, K. (2023) Recent development on double pass solar thermal collector. Renewable and Sustainable Energy Reviews, 183.

Abduljabbar, A. and Eissa Mohyaldinn, M. and Ridha, S. and Younis, O. and Saeed Alakbari, F. (2023) CFD-based erosion modelling of sand screen using dense discrete phase model: Investigating carrier fluid type effect. Advanced Powder Technology, 34 (9).

Haruna, A. and Tanimu, G. and Ibrahim, I. and Garba, Z.N. and Yahaya, S.M. and Musa, S.G. and Merican, Z.M.A. (2023) Mitigating oil and gas pollutants for a sustainable environment � Critical review and prospects. Journal of Cleaner Production, 416.

Hussnain, S.M. and Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Hussain, M.Z. (2023) Degradation and mechanical performance of fibre-reinforced polymer composites under marine environments: A review of recent advancements. Polymer Degradation and Stability, 215.

Irawan, M.Z. and Dharmowijoyo, D.B.E. and Waluyo, T.A. and Widiastuti, N.O. (2023) Responding to customers while driving: Predictors of intention to text among motorcycle-based ride-hailing drivers. Transportation Research Interdisciplinary Perspectives, 21. ISSN 25901982

Li, A.T.B. and Bakar, M.A.A. and Omar, A.F. and Saheed, M.S.M. and Taib, N.A.M. and Mohammad, S.M. and Krishnan, G. and Abdullah, M. (2023) 3rd order optical nonlinearity enhancement of halochromic phenol red dye immobilized in PVA/silica hybrid host matrix. Journal of Sol-Gel Science and Technology, 107 (3). pp. 523-535.

Kamyab, H. and Chelliapan, S. and Hayder, G. and Yusuf, M. and Taheri, M.M. and Rezania, S. and Hasan, M. and Yadav, K.K. and Khorami, M. and Farajnezhad, M. and Nouri, J. (2023) Exploring the potential of metal and metal oxide nanomaterials for sustainable water and wastewater treatment: A review of their antimicrobial properties. Chemosphere, 335.

Yusuf, A.A. and Ampah, J.D. and Veza, I. and Atabani, A.E. and Hoang, A.T. and Nippae, A. and Powoe, M.T. and Afrane, S. and Yusuf, D.A. and Yahuza, I. (2023) Investigating the influence of plastic waste oils and acetone blends on diesel engine combustion, pollutants, morphological and size particles: Dehalogenation and catalytic pyrolysis of plastic waste. Energy Conversion and Management, 291. ISSN 01968904

Mustaffa, Z. and Edmund, J.E. and Al-Bared, M.A.M. and Hanizan, D.F. and Ben Seghier, M.E.A. (2023) Failure mechanisms of reinforced thermoplastic pipe (RTP) with crack defects at longitudinal and circumferential orientations. Engineering Failure Analysis, 151.

Gad, M.A. and Nikbakht, E. and Faez, M. and Rusydan, A. and Abu Bakar, N.B. (2023) Structural performance of sandwich steel-concrete-steel composites utilising engineered cementitious composites. Structures, 55. pp. 545-556.

Ahmad, I. and Jee, H. and Song, S.H. and Kim, M.J. and Eisa, T. and Jang, J.K. and Chae, K.-J. and Chuah, C.Y. and Yang, E. (2023) Delaminated or multilayer Ti3C2TX-MXene-incorporated polydimethylsiloxane mixed-matrix membrane for enhancing CO2/N2 separation. Materials Today Sustainability, 23.

Chuah, C.Y. and Bae, T.-H. (2023) Polyimide-derived carbon molecular sieve membranes for advanced gas separation: From membrane development to pilot-scale operations. Separation and Purification Technology, 320.

Hussein, A.R. and Albarody, T.M.B. and Abdullah, M.A. (2023) Dielectric and scattering properties of transparent SiC composite in X-band range for radome application. Journal of the Australian Ceramic Society, 59 (4). pp. 1023-1038.

Mkawi, E.M. and Iqbal, M.W. and Al-Hadeethi, Y. and Hassan, H. and Arkook, B. and ALmehmadi, F.G. and Dennis, J.O. (2023) Exploring the redox characteristics of vanadium copper sulfide (VCuS) and its applications as a high-performance electrode for energy storage devices. Journal of Energy Storage, 67.

Haider, S. and Nawaz, R. and Anjum, M. and Haneef, T. and Oad, V.K. and Uddinkhan, S. and Khan, R. and Aqif, M. (2023) Property-performance relationship of core-shell structured black TiO2 photocatalyst for environmental remediation. Frontiers of Environmental Science and Engineering, 17 (9).

Muhammad Mustafa Rizvi, S. and kazmi, B. and Ali Ammar Taqvi, S. and Mobeen Khan, M. and Zabiri, H. and Qadir, D. and Ouladsmane, M. and Metwally, A.S.M. (2023) Techno-economic sustainability assessment for bio-hydrogen production based on hybrid blend of biomass: A simulation study. Fuel, 347.

Taqvi, S.A.A. and Zabiri, H. and Singh, S.K.M. and Tufa, L.D. and Naqvi, M. (2023) Investigation of control performance on an absorption/stripping system to remove CO2 achieving clean energy systems. Fuel, 347. ISSN 00162361

Safdar, R. and Thanabalan, M. (2023) Preparation of Chitosan-Tripolyphosphate Formulated Insulin Microparticles, Their Characterization, ANN Prediction, and Release Kinetics. Journal of Pharmaceutical Innovation, 18 (3). pp. 1047-1064.

Sabireen and Butt, F. and Ahmad, A. and Ullah, K. and Zaid, O. and Ahmed Shah, H. and Kamal, T. (2023) Mechanical performance of fiber-reinforced concrete and functionally graded concrete with natural and recycled aggregates. Ain Shams Engineering Journal, 14 (9).

Rahim, N.A. and Harun, N.Y. and Saeed, A.A.H. and Bilad, M.R. (2023) Green Route Synthesis of Amorphous Silica from Oil Palm Decanter Cake: From Literature Review to Experiments. Indonesian Journal of Science and Technology, 8 (2). pp. 141-156.

Yap, C.C. and Loh, S.K. and Chan, Y.J. and Supramaniam, C.V. and Soh, A.C. and Chong, M.F. and Lim, L.K. and Lim, J.W. (2023) Pilot-Scale Anaerobic Co-Digestion of Palm Oil Mill Effluent with Moringa Oleifera Filtrate in an Integrated Anaerobic�Aerobic Bioreactor. Bioenergy Research, 16 (3). pp. 1922-1938.

Omkaresh, B.R. and Kattimani, V.R. and Yatish, K.V. and Veza, I. and Pramoda, K. (2023) Optimization and kinetics analysis of biodiesel production from Annona reticulata seed oil using magnesium phosphate catalyst. Brazilian Journal of Chemical Engineering, 40 (3). pp. 775-787. ISSN 01046632

Yiin, C.L. and Yap, K.L. and Fui Chin, B.L. and Mun Lock, S.S. (2023) Insights into the Lignin Dissolution Mechanism of Water Content Tailored-choline Chloride (ChCl) Based Green Solvents for Biomass Pretreatment. Physical Chemistry Research, 11 (3). pp. 605-614.

Danish, M. and Al-Amin, M. and Rubaiee, S. and Gul, I.A. and Ahmed, A. and Rahman, M.O. and Zhang, C. and Yildirim, M.B. (2023) Investigation of coated 316L steel surface: Surface morphology, composition, corrosion, and biocompatibility using hydroxyapatite mixed-EDM process. Surface and Coatings Technology, 467.

Koay, K.Y. and Lim, W.M. and Kaur, S. and Soh, K. and Poon, W.C. (2023) How and when social media influencers' intimate self-disclosure fosters purchase intentions: the roles of congruency and parasocial relationships. Marketing Intelligence and Planning, 41 (6). pp. 790-809.

Saoula, O. and Shamim, A. and Mohd Suki, N. and Ahmad, M.J. and Abid, M.F. and Patwary, A.K. and Abbasi, A.Z. (2023) Building e-trust and e-retention in online shopping: the role of website design, reliability and perceived ease of use. Spanish Journal of Marketing - ESIC, 27 (2). pp. 178-201.

Abbasi, A.Z. and Asif, M. and Shamim, A. and Ting, D.H. and Rather, R.A. (2023) Engagement and consumption behavior of eSports gamers. Spanish Journal of Marketing - ESIC, 27 (2). pp. 261-282. ISSN 24449695

Sharifigaliuk, H. and Mahmood, S.M. and Zoveidavianpoor, M. and Zivar, D. and Ayobami Afolabi, F. (2023) Experimental and Modeling Study of Water Imbibition and Flowback in Shale: Prediction of Relative Permeability and Capillary Pressure Curves. Energy and Fuels, 37 (16). pp. 11928-11941.

Tan, V.W.G. and Chan, Y.J. and Arumugasamy, S.K. and Lim, J.W. (2023) Optimizing biogas production from palm oil mill effluent utilizing integrated machine learning and response surface methodology framework. Journal of Cleaner Production, 414.

Singa, P.K. and Isa, M.H. and Sivaprakash, B. and Ho, Y.-C. and Lim, J.-W. and Rajamohan, N. (2023) PAHs remediation from hazardous waste landfill leachate using fenton, photo � fenton and electro - fenton oxidation processes � performance evaluation under optimized conditions using RSM and ANN. Environmental Research, 231.

Zango, Z.U. and Ethiraj, B. and Al-Mubaddel, F.S. and Alam, M.M. and Lawal, M.A. and Kadir, H.A. and Khoo, K.S. and Garba, Z.N. and Usman, F. and Zango, M.U. and Lim, J.W. (2023) An overview on human exposure, toxicity, solid-phase microextraction and adsorptive removal of perfluoroalkyl carboxylic acids (PFCAs) from water matrices. Environmental Research, 231.

Shah, S.Z.H. and Lee, J. and Megat-Yusoff, P.S.M. and Hussain, S.Z. and Sharif, T. and Choudhry, R.S. (2023) Multiscale damage modelling of notched and un-notched 3D woven composites with randomly distributed manufacturing defects. Composite Structures, 318.

Warsi Khan, H. and Kaif Khan, M. and Moniruzzaman, M. and Al Mesfer, M.K. and Danish, M. and Irshad, K. and Yusuf, M. and Kamyab, H. and Chelliapan, S. (2023) Evaluating ionic liquids for its potential as eco-friendly solvents for naproxen removal from water sources using COSMO-RS: Computational and experimental validation. Environmental Research, 231.

Kang, D. and Jaisankar, R. and Murugesan, V. and Suvitha, K. and Narayanamoorthy, S. and Omar, A.H. and Arshad, N.I. and Ahmadian, A. (2023) A novel MCDM approach to selecting a biodegradable dynamic plastic product: a probabilistic hesitant fuzzy set-based COPRAS method. Journal of Environmental Management, 340.

Sebayang, A.H. and Kusumo, F. and Milano, J. and Shamsuddin, A.H. and Silitonga, A.S. and Ideris, F. and Siswantoro, J. and Veza, I. and Mofijur, M. and Reen Chia, S. (2023) Optimization of biodiesel production from rice bran oil by ultrasound and infrared radiation using ANN-GWO. Fuel, 346.

Ahmed, M. and Faisal, M. and Laskar, A. and Abdullah, A. and Shahadat, M. and Umar, K. and Kamyab, H. and Ubaidullah, M. and Pandit, B. and Prakash, C. and Yusuf, M. (2023) Experimental studies for thin layer model validation and microwave drying characteristics of beetroot considering energy optimization. Fuel, 346.

Min Woon, J. and Shiong Khoo, K. and Akermi, M. and Alanazi, M.M. and Wei Lim, J. and Jing Chan, Y. and Sean Goh, P. and Silas Chidi, B. and Kee Lam, M. and Zaini, J. and Roil Bilad, M. and Zhou, Y. and Tasnim Sahrin, N. and Musa Ardo, F. (2023) Reviewing biohydrogen production from microalgal cells through fundamental mechanisms, enzymes and factors that engendering new challenges and prospects. Fuel, 346.

Qasim, A. and Idris, A. and Mushtaq, A. and Khan, M.S. and Sahith Sayani, J.K. and Sulaimon, A.A. and Lal, B. and Moujdin, I.A. (2023) Effect of Hydrogen Bonding Energy and Freezing Point Depression of Quaternary Ammonium Salts on the Thermodynamic Gas Hydrate Inhibition. Journal of Chemical and Engineering Data, 68 (8). pp. 1856-1864.

Hussain, M. and Ali, O. and Raza, N. and Zabiri, H. and Ahmed, A. and Ali, I. (2023) Recent advances in dynamic modeling and control studies of biomass gasification for production of hydrogen rich syngas. RSC Advances, 13 (34). pp. 23796-23811.

Rodriguez, F. and Llamedo, M. and Belhaj, H. and Mendoza, A. and Elraies, K.A. (2023) Workflow of the In Situ Combustion EOR Method in Venezuela: Challenges and Opportunities. ACS Omega, 8 (31). pp. 28060-28079.

Dhananjaya, M. and Chaitanya, B.K. and Babu, T.S. and Potnuru, D. and Aljafari, B. and Kannan, R. and Lohani, T.K. (2023) Design of multi-input single output DC�DC converter with preserved output voltage under source-fault. IET Power Electronics, 16 (10). pp. 1732-1742. ISSN 17554535

Noda, Y. and Ikeda, S. and Yoshida, T. and Uemura, Y. and Nonaka, H. (2023) Relationship between Pellet Strength and Chemical Composition of Torrefied Cellulose �������������強度��学�����. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 102 (8). pp. 77-83. ISSN 09168753

Ismail, M. and Bustam, M.A. and Yeong, Y.F. (2023) Adsorption of Carbon Dioxide and Methane on Cobalt Gallate-Based Metal-Organic Framework (Co-Gallate): Equilibrium Isotherm, Thermodynamic and Kinetic Studies. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 108 (2). pp. 151-163.

Osman, H.I. and Ismail, Z. and Ching, D.L.C. and Omar, N.F.M. and Vieru, D. (2023) Unsteady MHD Casson Fluid Through a Porous Medium over an Inclined Plate in the Present of Chemical Reaction. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 108 (2). pp. 172-183.

Ahanin, Z. and Ismail, M.A. and Singh, N.S.S. and AL-Ashmori, A. (2023) Hybrid Feature Extraction for Multi-Label Emotion Classification in English Text Messages. Sustainability (Switzerland), 15 (16).

AL-Ashmori, A. and Thangarasu, G. and Dominic, P.D.D. and Al-Mekhlafi, A.-B.A. (2023) A Readiness Model and Factors Influencing Blockchain Adoption in Malaysia�s Software Sector: A Survey Study. Sustainability (Switzerland), 15 (16). ISSN 20711050

Salilew, W.M. and Gilani, S.I. and Lemma, T.A. and Fentaye, A.D. and Kyprianidis, K.G. (2023) Simultaneous Fault Diagnostics for Three-Shaft Industrial Gas Turbine. Machines, 11 (8).

Bheel, N. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Effect of Graphene Oxide as a Nanomaterial on the Durability Behaviors of Engineered Cementitious Composites by Applying RSM Modelling and Optimization. Buildings, 13 (8).

Bheel, N. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Durability Behaviours of Engineered Cementitious Composites Blended with Carbon Nanotubes against Sulphate and Acid Attacks by Applying RSM Modelling and Optimization. Buildings, 13 (8).

Giri, Y.G.A.L.P. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. and Abdulkadir, I. and Singh, P. and Ravindran, G. (2023) Mechanical and Microstructural Properties of Rubberized Geopolymer Concrete: Modeling and Optimization. Buildings, 13 (8).

Subramanian, J.A. and Asirvadam, V.S. and Zulkifli, S.A.B.M. and Sawaran Singh, N.S. and Shanthi, N. and Lagisetty, R.K. (2023) Target Localization for Autonomous Landing Site Detection: A Review and Preliminary Result with Static Image Photogrammetry. Drones, 7 (8). ISSN 2504446X

Salilew, W.M. and Gilani, S.I. and Lemma, T.A. and Fentaye, A.D. and Kyprianidis, K.G. (2023) Synergistic Effect of Physical Faults and Variable Inlet Guide Vane Drift on Gas Turbine Engine. Machines, 11 (8).

Bheel, N. and Mohammed, B.S. and Abdulkadir, I. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Effects of Graphene Oxide on the Properties of Engineered Cementitious Composites: Multi-Objective Optimization Technique Using RSM. Buildings, 13 (8).

Waqar, A. and Othman, I. and Hayat, S. and Radu, D. and Khan, M.B. and Galatanu, T.F. and Almujibah, H.R. and Hadzima-Nyarko, M. and Benjeddou, O. (2023) Building Information Modeling�Empowering Construction Projects with End-to-End Life Cycle Management. Buildings, 13 (8).

Hasan, M.M. and Hiung, L.H. and Kannan, R. and Lumen, S.M.S. (2023) An Efficient Bidirectional DC Circuit Breaker Capable of Regenerative Current Breaking for DC Microgrid Application. Electronics (Switzerland), 12 (16).

Ai Zamruddin, N.N.S. and Zainal Abidin, N.S. and Endut, Z. and Makoundi, C. and Lok, L.K. and Ismail, M.S. (2023) Trace Element Analysis of Pyrite and Arsenopyrite Using the LA-ICPMS Technique in Pulai, Central Belt of Peninsular Malaysia. Minerals, 13 (8).

Waqas, S. and Harun, N.Y. and Sambudi, N.S. and Abioye, K.J. and Zeeshan, M.H. and Ali, A. and Abdulrahman, A. and Alkhattabi, L. and Alsaadi, A.S. (2023) Effect of Operating Parameters on the Performance of Integrated Fixed-Film Activated Sludge for Wastewater Treatment. Membranes, 13 (8).

Ho, C.-D. and Tu, J.-W. and Chen, Y.-H. and Chew, T.L. (2023) Two-Dimensional Theoretical Analysis and Experimental Study of Mass Transfer in a Hollow-Fiber Dialysis Module Coupled with Ultrafiltration Operations. Membranes, 13 (8).

Kari, N.E.F. and Ismail, M. and Ahmad, A. and Kamal, K. and Chew, T.L. and Bustam, M.A. (2023) Screening and Experimental Validation for Selection of Open Metal Sites Metal-Organic Framework (M-CPO-27, M = Co, Mg, Ni and Zn) to Capture CO2. Separations, 10 (8).

Ibrahim, M. and Nawaz, M.H. and Rout, P.R. and Lim, J.-W. and Mainali, B. and Shahid, M.K. (2023) Advances in Produced Water Treatment Technologies: An In-Depth Exploration with an Emphasis on Membrane-Based Systems and Future Perspectives. Water (Switzerland), 15 (16).

Muneer, A. and Alwadain, A. and Ragab, M.G. and Alqushaibi, A. (2023) Cyberbullying Detection on Social Media Using Stacking Ensemble Learning and Enhanced BERT. Information (Switzerland), 14 (8).

Fati, S.M. and Muneer, A. and Alwadain, A. and Balogun, A.O. (2023) Cyberbullying Detection on Twitter Using Deep Learning-Based Attention Mechanisms and Continuous Bag of Words Feature Extraction. Mathematics, 11 (16). ISSN 22277390

Jagaba, A.H. and Bashir, F.M. and Lawal, I.M. and Usman, A.K. and Yaro, N.S.A. and Birniwa, A.H. and Hamdoun, H.Y. and Shannan, N.M. (2023) Agricultural Wastewater Treatment Using Oil Palm Waste Activated Hydrochar for Reuse in Plant Irrigation: Synthesis, Characterization, and Process Optimization. Agriculture (Switzerland), 13 (8).

Aljafari, B. and Pachauri, R.K. and Thanikanti, S.B. and Ayodele, B.V. (2023) Innovative Methodologies for Higher Global MPP of Photovoltaic Arrays under PSCs: Experimental Validation. Sustainability (Switzerland), 15 (15).

Rashid, F.L. and Al-Obaidi, M.A. and Dulaimi, A. and Mahmood, D.M.N. and Sopian, K. (2023) A Review of Recent Improvements, Developments, and Effects of Using Phase-Change Materials in Buildings to Store Thermal Energy. Designs, 7 (4).

Ahmad Fuad, M.I. and Hermana, M. and Jaya, M.S. and Ishak, M.A. (2023) A New Robust Weak Supervision Deep Learning Approach for Reservoir Properties Prediction in Malaysian Basin Field. Applied Sciences (Switzerland), 13 (15).

Alsaffar, M.A. and Ghany, M.A.R.A. and Mageed, A.K. and AbdulRazak, A.A. and Ali, J.M. and Sukkar, K.A. and Ayodele, B.V. (2023) Effect of Textural Properties on the Degradation of Bisphenol from Industrial Wastewater Effluent in a Photocatalytic Reactor: A Modeling Approach. Applied Sciences (Switzerland), 13 (15).

Tengku Hassan, T.N.A. and Mohd Shariff, A. and Abd Aziz, N.F. and Mustafa, N.F.A. and Tan, L.S. and Abdul Halim, H.N. and Mohamed, M. and Hermansyah, H. (2023) Aqueous Potassium Salt of L-Cysteine as Potential CO2 Removal Solvent: An Investigation on Physicochemical Properties and CO2 Loading Capacity. Sustainability (Switzerland), 15 (15).

Waqar, A. and Othman, I. and Radu, D. and Ali, Z. and Almujibah, H. and Hadzima-Nyarko, M. and Khan, M.B. (2023) Modeling the Relation between Building Information Modeling and the Success of Construction Projects: A Structural-Equation-Modeling Approach. Applied Sciences (Switzerland), 13 (15). ISSN 20763417

Bhanbhro, H. and Kwang Hooi, Y. and Kusakunniran, W. and Amur, Z.H. (2023) A Symbol Recognition System for Single-Line Diagrams Developed Using a Deep-Learning Approach. Applied Sciences (Switzerland), 13 (15).

Rahman, N.A.A. and May, Z. and Jaffari, R. and Hanif, M. (2023) Failure Severity Prediction for Protective-Coating Disbondment via the Classification of Acoustic Emission Signals. Sensors, 23 (15).

Al-Yaari, A. and Ling Chuan Ching, D. and Sakidin, H. and Sundaram Muthuvalu, M. and Zafar, M. and Haruna, A. and Merican Aljunid Merican, Z. and Azad, A.S. (2023) A New 3D Mathematical Model for Simulating Nanofluid Flooding in a Porous Medium for Enhanced Oil Recovery. Materials, 16 (15).

Rasool, M.H. and Ahmad, M. (2023) Epsom Salt-Based Natural Deep Eutectic Solvent as a Drilling Fluid Additive: A Game-Changer for Shale Swelling Inhibition. Molecules, 28 (15).

Ghaleb, E.A.A. and Dominic, P.D.D. and Singh, N.S.S. and Naji, G.M.A. (2023) Assessing the Big Data Adoption Readiness Role in Healthcare between Technology Impact Factors and Intention to Adopt Big Data. Sustainability (Switzerland), 15 (15).

Wang, P.S. and Ahmad, A. and Nazar, M. and Rahmah, A.U. and Moniruzzaman, M. (2023) Biocompatible and Biodegradable Surfactants from Orange Peel for Oil Spill Remediation. Molecules, 28 (15).

Basirun, A.A. and Karim, W.A.W.A. and Wei, N.C. and Wu, J. and Wilfred, C.D. (2023) Manganese Removal Using Functionalised Thiosalicylate-Based Ionic Liquid: Water Filtration System Application. Molecules, 28 (15).

Salisu, S. and Ruhaiyem, N.I.R. and Eisa, T.A.E. and Nasser, M. and Saeed, F. and Younis, H.A. (2023) Motion Capture Technologies for Ergonomics: A Systematic Literature Review. Diagnostics, 13 (15).

Al-Sabaeei, A.M. and Safaeldeen, G.I. and Napiah, M. (2023) Utilization of response surface methodology for predicting and optimizing the physical properties of rubberized asphalt modified with nanosilica and waste denim fiber. Cleaner Engineering and Technology, 15.

Zahoor, F. and Hanif, M. and Isyaku Bature, U. and Bodapati, S. and Chattopadhyay, A. and Azmadi Hussin, F. and Abbas, H. and Merchant, F. and Bashir, F. (2023) Carbon nanotube field effect transistors: an overview of device structure, modeling, fabrication and applications. Physica Scripta, 98 (8).

Zafar, M. and Sakidin, H. and Sheremet, M. and Dzulkarnain, I. and Nazar, R. and Al-Yaari, A. and Mohamad Asri, N.A. and Salleh, M.Z. and Bashir, S. (2023) A numerical investigation of mathematical modelling in 3D hexagonal porous prism on oil recovery using nanoflooding. Heliyon, 9 (8).

Khan, H.W. and Elgharbawy, A.A. and Shah, M.U.H. and Negash, B.M. and Khan, M.K. and Khan, K. and Kamyab, H. and Yusuf, M. (2023) Exploring ionic liquids for formaldehyde separation via computational COSMO-RS screening. Chemical Engineering Research and Design, 196. pp. 588-598.

Tariq Chaichan, M. and Kazem, H.A. and Al-Waeli, A.H.A. and Mohammed, S.A. and Omara, Z.M. and Sopian, K. (2023) Performance enhancement of solar distillation system works in harsh weather conditions: An experimental study. Thermal Science and Engineering Progress, 43. ISSN 24519049

Mohammad, S.T. and Al-Kayiem, H.H. and Khlief, A.K. and Aurybi, M.A. (2023) Modeling and Performance Assessment of a Hypothetical Stand-Alone Parabolic Trough Solar Power Plant Supported by Climatic Measurements in Ipoh, Malaysia. Journal of Solar Energy Engineering, Transactions of the ASME, 145 (4).

Vellaiyan, S. and Kuppusamy, S. and Chandran, D. and Raviadaran, R. and Devarajan, Y. (2023) Optimisation of fuel modification parameters for efficient and greener energy from diesel engine powered by water-emulsified biodiesel with cetane improver. Case Studies in Thermal Engineering, 48.

Sharuddin, M.H.B. and Sulaiman, M.H. and Kamaruddin, S. and Dahnel, A.H. and Abd Halim, N.F.H. and Ridzuan, M.J.M. and Abdul-Rani, A.M. (2023) Properties and tribological evaluation of graphene and fullerene nanoparticles as additives in oil lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (8). pp. 1647-1656.

Lim, M.T. and Tan, E.S. and Chai, Y.H. and Chin, B.L.F. and Juwono, F.H. and Hisham, D.H.B. and Mohamed Anuar, M.A. (2023) Pilot-scale flue gas pyrolysis system for organic and plastic wastes with improved liquid properties in a non-thermal plasma reactor. Journal of Analytical and Applied Pyrolysis, 173.

Nishat, A. and Yusuf, M. and Qadir, A. and Ezaier, Y. and Vambol, V. and Ijaz Khan, M. and Ben Moussa, S. and Kamyab, H. and Sehgal, S.S. and Prakash, C. and Yang, H.-H. and Ibrahim, H. and Eldin, S.M. (2023) Wastewater treatment: A short assessment on available techniques. Alexandria Engineering Journal, 76. pp. 505-516.

Siyal, A.A. and Shamsuddin, R. and Komiyama, M. and Manogaran, M.D. and Soehartanto, T. (2023) Control Strategies for Enhanced Biogas Production from Chicken Manure. ChemBioEng Reviews, 10 (4). pp. 423-440.

Wong, W.-Y. and Lim, S. and Pang, Y.-L. and Shuit, S.-H. and Lam, M.-K. and Tan, I.-S. and Chen, W.-H. (2023) A comprehensive review of the production methods and effect of parameters for glycerol-free biodiesel production. Renewable and Sustainable Energy Reviews, 182.

Marode, R.V. and Pedapati, S.R. and Lemma, T.A. and Awang, M. (2023) A review on numerical modelling techniques in friction stir processing: current and future perspective. Archives of Civil and Mechanical Engineering, 23 (3). ISSN 16449665

Tackie-Otoo, B.N. and Ayoub Mohammed, M.A. and Otchere, D.A. and Jufar, S.R. (2023) A study of the oil recovery potential and mechanisms of an alternative Alkaline-Surfactant-Polymer formulation for carbonate reservoir. Geoenergy Science and Engineering, 227.

Ibrahim, M.A. and Jaafar, M.Z. and Md Yusof, M.A. and Chong, A.S. and Idris, A.K. and Md Yusof, S.R. and Radzali, I. (2023) The effect of surface properties of silicon dioxide nanoparticle in drilling fluid on return permeability. Geoenergy Science and Engineering, 227.

Julio, B. and Ramdhani, S.R. and Avriansyah, R. and Dahliyanti, A. and Hussain, R. and Jusoh, N. and Usman, I. and Adhyaksa, G.W.P. (2023) Feasibility of Adding Antireflective Coating Foil Made from Nanoscale-Patterned Optical Disk Templates on Industrial Silicon Photovoltaics. Energy Technology, 11 (8).

Hassan, N.H. and Manickavasagam, G. and Althakafy, J.T. and Saaid, M. and Adnan, R. and Saad, B. and Wong, Y.F. (2023) Physicochemical properties, proline content and furanic compounds of stingless bee honey marketed in Malaysia. Journal of Food Composition and Analysis, 121.

Abd El Aal, A. and Abdullah, G.M.S. and Radwan, A.E. and Haroon Ali, S. and Shoukat, N. (2023) Linking the sedimentary cyclicity with mechanical and physical properties of limestone and marl rocks, Dam Formation, Eastern Saudi Arabia: Implications for hydrocarbon exploration and reservoir development. Journal of Asian Earth Sciences, 251.

Roslan, M.F. and Veza, I. and Said, M.F.M. (2023) Effects of injection parameters and intake air temperature on acetone-butanol-ethanol (ABE) blend HCCI-DI engine. Fuel, 345.

Muhamad, K.N. and Sahrin, N.T. and Alakeel, R.A. and Syed, R. and Ardo, F.M. and Woon, J.M. and Tan, W.N. and Cheng, C.K. and Zango, Z.U. and Ho, C.-D. and Lam, S.M. and Sin, J.C. and Khoo, K.S. and Kiatkittipong, W. and Lim, J.W. (2023) Low thermal pre-treatment of palm kernel expeller to enhance microalgal hydrogen production. Fuel, 345.

Nazly, D.Q.M. and Isawasan, P. and Salleh, K.A. and Sugathan, S.K. (2023) Malaysia coin identification app using deep learning model. Bulletin of Electrical Engineering and Informatics, 12 (4). pp. 2506-2512.

Mhmoud Alzubi, K. and Salah Alaloul, W. and Malkawi, A.B. and Al Salaheen, M. and Hannan Qureshi, A. and Ali Musarat, M. (2023) Automated monitoring technologies and construction productivity enhancement: Building projects case. Ain Shams Engineering Journal, 14 (8).

Abbasi, A.Z. and Azeem, S. and Farooq, M.U. and Hussain, K. and Ting, D.H. and Rehman, U. and Griffiths, M.D. and Pakpour, A.H. (2023) Engagement in educational games and quality of life in early and middle childhood: evidence from a developing country. Current Psychology, 42 (22). pp. 19386-19400. ISSN 10461310

Suparmaniam, U. and Lam, M.K. and Lim, J.W. and Yusup, S. and Tan, I.S. and Lau, S.Y. and Kodgire, P. and Kachhwaha, S.S. (2023) Influence of environmental stress on microalgae growth and lipid profile: a systematic review. Phytochemistry Reviews, 22 (4). pp. 879-901.

Kim, D.K. and Ban, I. and Poh, B.Y. and Shin, S.-C. (2023) A useful guide of effective mesh-size decision in predicting the ultimate strength of flat- and curved plates in compression. Journal of Ocean Engineering and Science, 8 (4). pp. 401-417.

Ahn, J. and Shamim, A. (2023) The role of consciousness in sustainable food consumption: a cultural comparison. Social Responsibility Journal, 19 (7). pp. 1263-1275. ISSN 17471117

Ting, D.H. (2023) Understanding knowledge transfer and knowledge management through social learning. Journal of Knowledge Management, 27 (7). pp. 1904-1924.

Ali, K. and Johl, S.K. (2023) Driving forces for industry 4.0 readiness, sustainable manufacturing practices and circular economy capabilities: does firm size matter? Journal of Manufacturing Technology Management, 34 (5). pp. 838-871.

Lahimer, A.A. and Razak, A.A. and Sharol, A.F. and Sopian, K. (2023) Automotive cabin soak temperature control strategies for improved safety, comfort and fuel efficiency: A review. Solar Energy, 259. pp. 416-436.

Wong, M.K. and Lock, S.S.M. and Chan, Y.H. and Yeoh, S.J. and Tan, I.S. (2023) Towards sustainable production of bio-based ethylene glycol: Progress, perspective and challenges in catalytic conversion and purification. Chemical Engineering Journal, 468. ISSN 13858947

Vasudevan, M. and Remesh, S. and Perumal, V. and Raja, P.B. and Ibrahim, M.N.M. and Gopinath, S.C.B. and Karuppanan, S. and Ovinis, M. (2023) Facile synthesis of MoS2 nanoflower-Ag NPs grown on lignin-derived graphene for Troponin I aptasensing. Chemical Engineering Journal, 468.

Qureshi, F. and Yusuf, M. and Ibrahim, H. and Kamyab, H. and Chelliapan, S. and Pham, C.Q. and Vo, D.-V.N. (2023) Contemporary avenues of the Hydrogen industry: Opportunities and challenges in the eco-friendly approach. Environmental Research, 229.

Kanthasamy, R. and Ali, I. and Ayodele, B.V. and Maddah, H.A. (2023) Bio-hydrogen production from the photocatalytic conversion of wastewater: Parametric analysis and data-driven modelling using nonlinear autoregressive with exogeneous input and back-propagated multilayer perceptron neural networks. Fuel, 344.

Al-Yaseri, A. and Al-Mukainah, H. and Yekeen, N. (2023) Experimental insights into limestone-hydrogen interactions and the resultant effects on underground hydrogen storage. Fuel, 344. ISSN 00162361

Loy, A.C.M. and Lim, J.Y. and How, B.S. and Yiin, C.L. and Lock, S.S.M. and Lim, L.G. and Alhamzi, H. and Yoo, C. (2023) Rethinking of the future sustainable paradigm roadmap for plastic waste management: A multi-nation scale outlook compendium. Science of the Total Environment, 881.

Adenutsi, C.D. and Turkson, J.N. and Wang, L. and Zhao, G. and Zhang, T. and Quaye, J.A. and Erzuah, S. and Sokama-Neuyam, Y.A. (2023) Review on Potential Application of Saponin-Based Natural Surfactants for Green Chemical Enhanced Oil Recovery: Perspectives and Progresses. Energy and Fuels, 37 (13). pp. 8781-8823.

Hassan, A. and Numin, M.S. and Jumbri, K. and Kee, K.E. and Borhan, N. and Nik Mohamed Daud, N.M.R. and Mohammed Nor, A. and Suhor, M.F. and Abdul Wahab, R. (2023) Density Functional Theory Studies on New Possible Biobased Gemini Corrosion Inhibitors Derived from Fatty Hydrazide Derivatives. ACS Omega, 8 (26). pp. 23945-23952.

Oke, A.E. and Kineber, A.F. and Al-Bukhari, I. and Famakin, I. and Kingsley, C. (2023) Exploring the benefits of cloud computing for sustainable construction in Nigeria. Journal of Engineering, Design and Technology, 21 (4). pp. 973-990. ISSN 17260531

Yunus, R.B. and Zainuddin, N. and Daud, H. and Kannan, R. and Abdul Karim, S.A. and Yahaya, M.M. (2023) A Modified Structured Spectral HS Method for Nonlinear Least Squares Problems and Applications in Robot Arm Control. Mathematics, 11 (14).

Zaulkiflee, N.D. and Ahmad, A.L. and Che Lah, N.F. and Low, S.C. and Nishiyama, N. (2023) Preliminary Study of Utilizing Polyaniline as Electrode Material for Supercapacitor Application: Juxtaposition of Electrochemical Performances. Malaysian Journal of Fundamental and Applied Sciences, 19 (4). pp. 645-652.

Sulaimon, A.A. and Sannang, M.Z. and Nazar, M. and Shariff, A.M. (2023) Investigating the Effect of Okra Mucilage on Waxy Oil Flow in Pipeline. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 107 (2). pp. 41-49.

Al-Shami, T.M. and Jufar, S.R. and Negash, B.M. and Hyun, L.J. and Abdullahi, M.B. and Al-Hajri, S. (2023) Effect of Matrix Permeability on a Horizontal Shale Gas Well Performance using a Fully Coupled Fluid Flow with Geomechanics Model. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 107 (2). pp. 208-224.

Tahir, H. and Khan, M.B. and Shafiq, N. and Radu, D. and Nyarko, M.H. and Waqar, A. and Almujibah, H.R. and Benjeddou, O. (2023) Optimisation of Mechanical Characteristics of Alkali-Resistant Glass Fibre Concrete towards Sustainable Construction. Sustainability (Switzerland), 15 (14).

Yaro, N.S.A. and Sutanto, M.H. and Baloo, L. and Habib, N.Z. and Usman, A. and Yousafzai, A.K. and Ahmad, A. and Birniwa, A.H. and Jagaba, A.H. and Noor, A. (2023) A Comprehensive Overview of the Utilization of Recycled Waste Materials and Technologies in Asphalt Pavements: Towards Environmental and Sustainable Low-Carbon Roads. Processes, 11 (7). ISSN 22279717

Waqar, A. and Othman, I. and Falqi, I.I. and Almujibah, H.R. and Alshehri, A.M. and Alsulamy, S.H. and Benjeddou, O. (2023) Assessment of Barriers to Robotics Process Automation (RPA) Implementation in Safety Management of Tall Buildings. Buildings, 13 (7).

Teh, H.M. and Al-Towayti, F.A.H. and Venugopal, V. and Ma, Z. (2023) Interaction of Waves with a Free-Surface Semicircular Breakwater: Experimental Investigation and Empirical Models. Journal of Marine Science and Engineering, 11 (7).

Rasool, M.H. and Ahmad, M. and Siddiqui, N.A. and Junejo, A.Z. (2023) Eco-Friendly Drilling Fluid: Calcium Chloride-Based Natural Deep Eutectic Solvent (NADES) as an All-Rounder Additive. Energies, 16 (14).

Khan, M.B. and Shafiq, N. and Waqar, A. and Radu, D. and Cisma�, C. and Imran, M. and Almujibah, H. and Benjeddou, O. (2023) Effects of Jute Fiber on Fresh and Hardened Characteristics of Concrete with Environmental Assessment. Buildings, 13 (7).

Tamidi, A.M. and Lau, K.K. and Yusof, S.M.M. and Azmi, N. and Zakariya, S. and Patthi, U. (2023) Enhancement of CO2 Absorption Process Using High-Frequency Ultrasonic Waves. Sustainability (Switzerland), 15 (14).

Ganesan, T. and Elamvazuthi, I. (2023) Entanglement Distillation Optimization Using Fuzzy Relations for Quantum State Tomography. Algorithms, 16 (7). ISSN 19994893

Surmi, A. and Shariff, A.M. and Lock, S.S.M. (2023) Modeling of Nitrogen Removal from Natural Gas in Rotating Packed Bed Using Artificial Neural Networks. Molecules, 28 (14).

Sajjad, M. and Hu, A. and Waqar, A. and Falqi, I.I. and Alsulamy, S.H. and Bageis, A.S. and Alshehri, A.M. (2023) Evaluation of the Success of Industry 4.0 Digitalization Practices for Sustainable Construction Management: Chinese Construction Industry. Buildings, 13 (7).

Jaffari, R. and Hashmani, M.A. and Reyes-Aldasoro, C.C. and Junejo, A.Z. and Taib, H. and Abdullah, M.N.B. (2023) PLPose: An efficient framework for detecting power lines via key points-based pose estimation. Journal of King Saud University - Computer and Information Sciences, 35 (7).

Suleiman, A.A. and Daud, H. and Singh, N.S.S. and Othman, M. and Ishaq, A.I. and Sokkalingam, R. (2023) A Novel Odd Beta Prime-Logistic Distribution: Desirable Mathematical Properties and Applications to Engineering and Environmental Data. Sustainability (Switzerland), 15 (13).

Mohd Yusop, N. and Ching, O.P. and Sufian, S. and Zain, M.M. (2023) Enhanced Effect of Metal Sulfide Doping (MgS-TiO2) Nanostructure Catalyst on Photocatalytic Reduction of CO2 to Methanol. Sustainability (Switzerland), 15 (13).

Abdul Khadir, F.K.B. and Yee, N.C. and Takaijudin, H.B. and Zawawi, N.A.W.A. and Alaloul, W.S. and Musarat, M.A. (2023) Evaluation of the Implementation of Sustainable Stormwater Management Practices for Landed Residential Areas: A Case Study in Malaysia. Sustainability (Switzerland), 15 (13).

Ramli, A. and Khairul Anuar, N.A.S.I. and Bakhtiar, N.A.A. and Mohamad Yunus, N. and Mohamed, A.R. (2023) Direct Oxidation of Hibiscus cannabinus Stalks to Vanillin Using CeO2 Nanostructure Catalysts. Molecules, 28 (13).

Devan, P.A.M. and Ibrahim, R. and Omar, M. and Bingi, K. and Abdulrab, H. (2023) A Novel Hybrid Harris Hawk-Arithmetic Optimization Algorithm for Industrial Wireless Mesh Networks. Sensors, 23 (13).

Usman, I.M.T. and Ho, Y.-C. and Lam, M.-K. and Show, P.-L. and Sujarwo, W. (2023) Continuous-Flow Grafting of LENFLOC� Coagulant for Water Treatment toward Circular Economy. Water (Switzerland), 15 (13).

Salleh, N.F. and Yusup, S. and Mandal, P.C. and Ruslan, M.S.H. (2023) Extraction of Metalloporphyrins Using Subcritical Toluene-Assisted Thermally Stable Ionic Liquid. Pertanika Journal of Science and Technology, 31 (4). pp. 1971-1990.

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Salih, A.A. and Abbas, A.H. (2023) A decision tree model for accurate prediction of sand erosion in elbow geometry. Heliyon, 9 (7).

Al-Amin, M. and Danish, M. and Rubaiee, S. and Ahmed, A. and Abdul-Rani, A.M. and Mannan, A. and Yildirim, M.B. (2023) Improvement in 316L steel surface features, corrosion and biocompatibility through novel CNT-assisted hydroxyapatite powder mixed-EDM process. Applied Physics A: Materials Science and Processing, 129 (7).

Khosravi, V. and Mahmood, S.M. and Yeap, S.P. (2023) Unveiling the molecular interactions of surface wetting modification in porous medium: A groundbreaking insight into wettability alteration. Chemical Engineering Research and Design, 195. pp. 418-431.

Hassan, Y.M. and Guan, B.H. and Chuan, L.K. and Hamza, M.F. and Sikiru, S. (2023) Effect of silica-based hybrid nano-surfactant on interfacial tension reduction for enhanced oil recovery. Chemical Engineering Research and Design, 195. pp. 370-377. ISSN 02638762

Lim, S.W. and Kansedo, J. and Tan, I.S. and Tan, Y.H. and Nandong, J. and Lam, M.K. and Ongkudon, C.M. (2023) Microbial valorization of oil-based substrates for polyhydroxyalkanoates (PHA) production � Current strategies, status, and perspectives. Process Biochemistry, 130. pp. 715-733.

Bello, U. and Amran, N.A. and Ruslan, M.S.H. (2023) Improving antioxidant scavenging effect of fruit peel waste extracts and their applicability in biodiesel stability enhancement. Journal of Saudi Chemical Society, 27 (4).

Babikir, I. and Elsaadany, M. and Sajid, M. and Laudon, C. (2023) On the training sample size and classification performance: An experimental evaluation in seismic facies classification. Geoenergy Science and Engineering, 226.

Bukhari, S.M.A.H. and Baccour, E. and Bilal, K. and Shuja, J. and Erbad, A. and Bilal, M. (2023) To transcode or not? A machine learning based edge video caching and transcoding strategy. Computers and Electrical Engineering, 109.

Foong, S.Y. and Chan, Y.H. and Yiin, C.L. and Lock, S.S.M. and Loy, A.C.M. and Lim, J.Y. and Yek, P.N.Y. and Wan Mahari, W.A. and Liew, R.K. and Peng, W. and Tabatabaei, M. and Aghbashlo, M. and Lam, S.S. (2023) Sustainable CO2 capture via adsorption by chitosan-based functional biomaterial: A review on recent advances, challenges, and future directions. Renewable and Sustainable Energy Reviews, 181.

Alfellag, M.A. and Kamar, H.M. and Sidik, N.A.C. and Muhsan, A.S. and Kazi, S.N. and Alawi, O.A. and Abidin, U. (2023) Rheological and thermophysical properties of hybrid nanofluids and their application in flat-plate solar collectors: a comprehensive review. Journal of Thermal Analysis and Calorimetry, 148 (14). pp. 6645-6686.

Chan, Y.H. and Lock, S.S.M. and Chin, B.L.F. and Wong, M.K. and Loy, A.C.M. and Foong, S.Y. and Yiin, C.L. and Lam, S.S. (2023) Progress in thermochemical co-processing of biomass and sludge for sustainable energy, value-added products and circular economy. Bioresource Technology, 380.

Kanna Dasan, Y. and Lam, M.K. and Chai, Y.H. and Lim, J.W. and Ho, Y.C. and Tan, I.S. and Lau, S.Y. and Show, P.L. and Lee, K.T. (2023) Unlocking the potential of microalgae bio-factories for carbon dioxide mitigation: A comprehensive exploration of recent advances, key challenges, and energy-economic insights. Bioresource Technology, 380.

Lawal, I.M. and Bertram, D. and White, C.J. and Kutty, S.R.M. and Hassan, I. and Jagaba, A.H. (2023) Application of Boruta algorithms as a robust methodology for performance evaluation of CMIP6 general circulation models for hydro-climatic studies. Theoretical and Applied Climatology, 153 (1-2). pp. 113-135.

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Muhsan, A.S. and Hussein, I.A. (2023) A robust Gaussian process regression-based model for the determination of static Young�s modulus for sandstone rocks. Neural Computing and Applications, 35 (21). pp. 15693-15707.

Abioye, K.J. and Harun, N.Y. and Sufian, S. and Yusuf, M. and Kamyab, H. and Hassan, M.A. and Jagaba, A.H. and Sikiru, S. and Ubaidullah, M. and Pandit, B. and Dhaliwal, N. (2023) Regulation of ash slagging behavior of palm oil decanter cake by alum sludge addition. Chemosphere, 330.

Tawalbeh, M. and Mohammed, S. and Al-Othman, A. and Yusuf, M. and Mofijur, M. and Kamyab, H. (2023) MXenes and MXene-based materials for removal of pharmaceutical compounds from wastewater: Critical review. Environmental Research, 228.

Liew, Z.-S. and Ho, Y.-C. and Lau, W.J. and Youravong, W. and Sirinupong, T. and Liang, Y.Y. (2023) Investigations on membrane performance for coconut water concentration under pressure and by osmotically driven process. Journal of Chemical Technology and Biotechnology, 98 (7). pp. 1722-1730. ISSN 02682575

Safdar, R. and Nawaz, M. and Mushtaq, A. and Khanh Tran, T. and Aziz Omar, A. (2023) A bibliometric analysis for estimating the global research trends related to applications of ionic liquids in drug delivery. Journal of Molecular Liquids, 381.

Al-Sabaeei, A.M. and Alhussian, H. and Abdulkadir, S.J. and Giustozzi, F. and Napiah, M. and Jagadeesh, A. and Sutanto, M. and Memon, A.M. (2023) Utilization of response surface methodology and machine learning for predicting and optimizing mixing and compaction temperatures of bio-modified asphalt. Case Studies in Construction Materials, 18.

Memon, A.M. and Sutanto, M.H. and Yusoff, N.I.M. and Memon, R.A. and Khan, M.I. and Al-Sabaeei, A.M. (2023) Rheological modeling and microstructural evaluation of oily sludge modified bitumen. Case Studies in Construction Materials, 18.

Hasan, K. and Othman, M.M. and Meraj, S.T. and Mekhilef, S. and Abidin, A.F.B. (2023) Shunt Active Power Filter Based on Savitzky-Golay Filter: Pragmatic Modelling and Performance Validation. IEEE Transactions on Power Electronics, 38 (7). pp. 8838-8850.

Oladosu, T.L. and Al-Kayiem, H.H. and Gilani, S.I.U.H. and Baheta, A.T. and Horng, T.W. (2023) Performance enhancement of electrodialysis regeneration of deep eutectic solvent for liquid desiccant air conditioning systems. Journal of Building Engineering, 70.

Gu, J. and Zhao, L. and Yue, X. and Arshad, N.I. and Mohamad, U.H. (2023) Multistage quality control in manufacturing process using blockchain with machine learning technique. Information Processing and Management, 60 (4).

Ali, A.M. and Waheed, A. and Shahbaz, M. and Mirani, A.A. and Shahzad, K. and Al-Zahrani, A.A. and Nawaz, A.M. and Mahpudz, A.B. (2023) Synergistic evaluation of co-torrefaction performance of rice husk and coffee bean ground blends for biosolid production for industrial fuel sustainability. Fuel, 343.

Nabilah Mohd Noor, N. and Hazirah Kamaruzaman, N. and Al-Gheethi, A. and Maya Saphira Radin Mohamed, R. and Hossain, M.S. (2023) Degradation of antibiotics in aquaculture wastewater by bio-nanoparticles: A critical review. Ain Shams Engineering Journal, 14 (7).

Ayub, S. and Hoe Guan, B. and Soleimani, H. and Ahmad, F. and Un Nisa, Z. and Yetunde Yusuf, J. and Amin Bin Hamid, M. and Mudassir Hassan, Y. (2023) Magnetite deposit on graphene nanoplatelets Surface: An assessment of grafting parameters: Magnetite deposit on graphene nanoplatelets Surface. Ain Shams Engineering Journal, 14 (7).

Talpur, M.A.H. and Khahro, S.H. and Ali, T.H. and Waseem, H.B. and Napiah, M. (2023) Computing travel impendences using trip generation regression model: a phenomenon of travel decision-making process of rural households. Environment, Development and Sustainability, 25 (7). pp. 5973-5996.

Chai, Y.H. and Mohamed, M. and Cheng, Y.W. and Chin, B.L.F. and Yiin, C.L. and Yusup, S. and Lam, M.K. (2023) A review on potential of biohydrogen generation through waste decomposition technologies. Biomass Conversion and Biorefinery, 13 (10). pp. 8549-8574.

Azizan, M.T. and Aqsha, A. and Ameen, M. and Syuhada, A. and Klaus, H. and Abidin, S.Z. and Sher, F. (2023) Catalytic reforming of oxygenated hydrocarbons for the hydrogen production: an outlook. Biomass Conversion and Biorefinery, 13 (10). pp. 8441-8464.

Abubakar, A.M. and Houndedjihou, D. and Shamsuddin, R. and Kasinath, A. and Lawan, B. and Haruna, N.M. (2023) Substitute Biogas Source for Sustainable Energy Generation: Advances in Insects Employment. Journal of Studies in Science and Engineering, 3 (1). pp. 61-68. ISSN 2789634X

Mohyaldinn, M.E. and Alakbari, F.S. and Bin Azman Nor, A.N.A. and Hassan, A.M. (2023) Stability, Rheological Behavior, and pH Responsiveness of CTAB/HCl Acidic Emulsion: Experimental Investigation. ACS Omega, 8 (25). pp. 22428-22439.

Ajmal, M.M. and Khan, M. and Shad, M.K. and AlKatheeri, H. and Jabeen, F. (2023) Empirical examination of societal, financial and technology-related challenges amid COVID-19 in service supply chains: evidence from emerging market. International Journal of Logistics Management, 34 (4). pp. 994-1019. ISSN 09574093

Oke, A.E. and Kineber, A.F. and Alsolami, B. and Kingsley, C. (2023) Adoption of cloud computing tools for sustainable construction: a structural equation modelling approach. Journal of Facilities Management, 21 (3). pp. 334-351. ISSN 14725967

Hasni, D.I.M. and Sarlan, A. (2023) COLLABORATIVE VISUALIZATION FRAMEWORK FOR CROSS-FIELD WORKING GROUP: ANALYSIS THROUGH SMART PLS. Journal of Theoretical and Applied Information Technology, 101 (11). pp. 4377-4389.

Kalam, S. and Abu-Khamsin, S.A. and Kamal, M.S. and Abbasi, G.R. and Lashari, N. and Patil, S. and Abdurrahman, M. (2023) A Mini-Review on Underground Hydrogen Storage: Production to Field Studies. Energy and Fuels, 37 (12). pp. 8128-8141. ISSN 08870624

Suparmaniam, U. and Lam, M.K. and Rawindran, H. and Lim, J.W. and Pa'ee, K.F. and Yong, K.T.L. and Tan, I.S. and Chin, B.L.F. and Show, P.L. and Lee, K.T. (2023) Optimizing extraction of antioxidative biostimulant from waste onion peels for microalgae cultivation via response surface model. Energy Conversion and Management, 286.

Mat Esa, M.A. and Muhammad, M. (2023) Adoption of prescriptive analytics for naval vessels risk-based maintenance:A conceptual framework. Ocean Engineering, 278.

Rather, S.-U. and Islam, M.S. and Bamufleh, H.S. and Alhumade, H. and Ahmad Taimoor, A. and Saeed, U. and Adebayo Sulaimon, A. and Anamul Hoque, M. and Alalayah, W.M. and Mohd Shariff, A. (2023) Effects of alcohols and temperature on association, micellar parameters, and energetics of mixture of cetylpyridinium bromide and polyvinyl alcohol. Journal of Molecular Liquids, 380.

Abulkhair, H. and Nallakukkala, S. and Moujdin, I.A. and Almatrafi, E. and Bamaga, O. and Alsaiari, A. and Albeirutty, M.H. and Nallakukkala, J.R.D. and Lal, B. and Shariff, A.M. (2023) Desalination of produced water via CO2 + C3H8 hydrate formation. Separation and Purification Technology, 315.

Nguyen, H.-H.T. and Nguyen, H.T. and Ahmed, S.F. and Rajamohan, N. and Yusuf, M. and Sharma, A. and Arunkumar, P. and Deepanraj, B. and Tran, H.-T. and Al-Gheethi, A. and Vo, D.-V.N. (2023) Emerging waste-to-wealth applications of fly ash for environmental remediation: A review. Environmental Research, 227.

Meraj, S.T. and Yu, S.S. and Rahman, M.S. and Hasan, K. and Hossain Lipu, M.S. and Trinh, H. (2023) Energy management schemes, challenges and impacts of emerging inverter technology for renewable energy integration towards grid decarbonization. Journal of Cleaner Production, 405. ISSN 09596526

Woon, J.M. and Khoo, K.S. and AL-Zahrani, A.A. and Alanazi, M.M. and Lim, J.W. and Cheng, C.K. and Sahrin, N.T. and Ardo, F.M. and Yi-Ming, S. and Lin, K.-S. and Lan, J.C.-W. and Hossain, M.S. and Kiatkittipong, W. (2023) Epitomizing biohydrogen production from microbes: Critical challenges vs opportunities. Environmental Research, 227.

Ekeoma, B.C. and Ekeoma, L.N. and Yusuf, M. and Haruna, A. and Ikeogu, C.K. and Merican, Z.M.A. and Kamyab, H. and Pham, C.Q. and Vo, D.-V.N. and Chelliapan, S. (2023) Recent advances in the biocatalytic mitigation of emerging pollutants: A comprehensive review. Journal of Biotechnology, 369. pp. 14-34.

Kathlyn, T.K. and Zabiri, H. and Aldrich, C. and Liu, X. and Mohd Amiruddin, A.A.A. (2023) Fault Detection and Identification in an Acid Gas Removal Unit Using Deep Autoencoders. ACS Omega, 8 (22). pp. 19273-19286.

Hasbullah, S. and Mohd Zahid, M.S. and Mandala, S. (2023) Detection of Myocardial Infarction Using Hybrid Models of Convolutional Neural Network and Recurrent Neural Network. BioMedInformatics, 3 (2). pp. 478-492.

Efras, M.R. and Dzulkarnain, I. and Merdeka, M.G. and Redzuan, F.R. and Rita, N. and Alameen, M.B. (2023) Steamflood Injection Performance on 2 Types of Sand Heterogeneity in XYZ Field. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 106 (2). pp. 1-13.

Nizam, C.M. and Ismail, A.R. and Sukadarin, E.H. and Husshin, N. (2023) The Effects of Constant Illuminance at Multiple Temperatures Towards Muscle Activities for Rubber Scrap Industries. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 106 (2). pp. 194-200.

Al-Azawiey, S.S. and Mohamed, M.M. and Arifin, A.B. (2023) Effectiveness of PV/T passive natural air cooling by backside attached fins. International Journal of Energy Production and Management, 8 (2). pp. 55-62. ISSN 20563272

Osman, M. and Takaijudin, H. and Massoudieh, A. and Goh, H.W. (2023) Effects of Vegetation and Saturated Zone in Cascaded Bioretention on Enhancing Nutrient Removal. Environmental Engineering Research, 28 (3).

Usman Kankia, M. and Baloo, L. and Danlami, N. and Zawawi, N.A. and Bello, A. and Muhammad, S.I. (2023) Microstructural Analysis and Compressive Strength of Fly Ash and Petroleum Sludge Ash Geopolymer Mortar under High Temperatures. Sustainability (Switzerland), 15 (12).

Ho, C.-D. and Tu, J.-W. and Lim, J.-W. and Lai, W.-C. (2023) Device Performance of a Tubular Membrane Dialyzer Incorporating Ultrafiltration Effects on the Dialysis Efficiency. Membranes, 13 (6).

Amur, Z.H. and Hooi, Y.K. and Soomro, G.M. and Bhanbhro, H. and Karyem, S. and Sohu, N. (2023) Unlocking the Potential of Keyword Extraction: The Need for Access to High-Quality Datasets. Applied Sciences (Switzerland), 13 (12).

Yahya, M.S. and Soeung, S. and Singh, N.S.S. and Yunusa, Z. and Chinda, F.E. and Rahim, S.K.A. and Musa, U. and Nor, N.B.M. and Sovuthy, C. and Abro, G.E.M. (2023) Triple-Band Reconfigurable Monopole Antenna for Long-Range IoT Applications. Sensors, 23 (12).

Yong, G.T.X. and Chan, Y.J. and Lau, P.L. and Ethiraj, B. and Ghfar, A.A. and Mohammed, A.A.A. and Shahid, M.K. and Lim, J.W. (2023) Optimization of the Performances of Palm Oil Mill Effluent (POME)-Based Biogas Plants Using Comparative Analysis and Response Surface Methodology. Processes, 11 (6).

Yap, B.J.T. and Heng, G.C. and Ng, C.A. and Bashir, M.J.K. and Lock, S.S.M. (2023) Enhancement of Electrochemical�Anaerobic Digested Palm Oil Mill Effluent Waste Activated Sludge in Solids Minimization and Biogas Production: Bench�Scale Verification. Processes, 11 (6).

Maqsoom, A. and Ashraf, H. and Alaloul, W.S. and Salman, A. and Ullah, F. and Ghufran, M. and Musarat, M.A. (2023) The Relationship between Error Management, Safety Climate, and Job-Stress Perception in the Construction Industry: The Mediating Role of Psychological Capital. Buildings, 13 (6).

Wali, A. and Mahamad, S. and Sulaiman, S. (2023) Task Automation Intelligent Agents: A Review. Future Internet, 15 (6).

Salleh, H. and Ahmad, A.A. and Abdul-Samad, Z. and Alaloul, W.S. and Ismail, A.S. (2023) BIM Application in Construction Projects: Quantifying Intangible Benefits. Buildings, 13 (6). ISSN 20755309

Jamallullail, S.H. and Nordin, S.M. (2023) Ethnolinguistics Vitality Theory: The Last Stance for a Language Survival. Sustainable Multilingualism, 22 (1). pp. 27-55. ISSN 23352019

Singh, P. and Yee, N.C. and Mohammed, B.S. (2023) Utilizing Stearic-Acid-Coated Marble Dust for the Production of Eco-Friendly Self-Cleaning Concrete: RSM Modeling and Optimization. Sustainability (Switzerland), 15 (11).

Ayub, S. and Guan, B.H. and You, K.Y. (2023) Electromagnetic interference shielding mechanisms of MMG@PVDF composites for a broadband frequency range. Materials Today Communications, 35.

Razak, N.A. and Nasir, R. and Azmi, N. and Mukhtar, H. and Mohsim, D.F. and Mustafa, M.R.U. (2023) Utilization and performance evaluation of mixed matrix membranes for the treatment of produced water: A review. Water Environment Research, 95 (6).

Vasudevan, M. and Kanesan, A. and Remesh, S. and Perumal, V. and Raja, P.B. and Ibrahim, M.N.M. and Karuppanan, S. and Gopinath, S.C.B. and Ovinis, M. (2023) Characterizations of synthesized laser-scribed graphene/ molybdenum disulfide (LSG/MoS2) hybrids for supercapacitor performance. Journal of Water and Environmental Nanotechnology, 8 (2). pp. 137-150.

Ahmad, B. and Ali, S.H. and Wahid, A. and Bashir, Y. and Shoukat, N. and Qadri, S.M.T. and Ali, A. and Siddiqui, N.A. and Abioui, M. and Yaseen, A. (2023) Soft Sedimentary Deformations Structures (SSDS) in Neoproterozoic Sharaban Formation, Kirana Complex, Pakistan: Regional Tectonic Implications. Doklady Earth Sciences, 510 (2). pp. 371-386.

Sutanto, J.E. and Krisprimandoyo, D.A. and Imron, M.A. (2023) Integration of trust supplier with supply chain capability and application towards supply chain performance: Minimarket competition during the Covid-19 pandemic. Uncertain Supply Chain Management, 11 (3). pp. 1031-1040.

Hakimi, M. and Manogaran, M.D. and Shamsuddin, R. and Mohd Johari, S.A. and Abdalla M Hassan, M. and Soehartanto, T. (2023) Co-anaerobic digestion of sawdust and chicken manure with plant herbs: Biogas generation and kinetic study. Heliyon, 9 (6).

Suryawan, I.W.K. and Septiariva, I.Y. and Sari, M.M. and Ramadan, B.S. and Suhardono, S. and Sianipar, I.M.J. and Tehupeiory, A. and Prayogo, W. and Lim, J.-W. (2023) Acceptance of Waste to Energy Technology by Local Residents of Jakarta City, Indonesia to Achieve Sustainable Clean and Environmentally Friendly Energy. Journal of Sustainable Development of Energy, Water and Environment Systems, 11 (2). ISSN 18489257

Abdul Rahman, A.S. and Fizal, A.N.S. and Khalil, N.A. and Ahmad Yahaya, A.N. and Hossain, M.S. and Zulkifli, M. (2023) Fabrication and Characterization of Magnetic Cellulose�Chitosan�Alginate Composite Hydrogel Bead Bio-Sorbent. Polymers, 15 (11).

Zafar, M. and Sakidin, H. and Dzulkarnain, I. and Hussain, A. and Sheremet, M. and Nazar, R. and Al-Yaari, A. and Asri, N.A.M. and Bashir, S. (2023) The Impact of 3D Prism Cavity for Enhanced Oil Recovery Using Different Nanomaterials. Materials, 16 (11).

Mohamed, E.A. and Adam, I.K. and Yusoff, M.Z. (2023) Effect of Subject-Specific Region of Interest on Motor Imagery Brain�Computer Interface. Applied Sciences (Switzerland), 13 (11).

Waqar, A. and Othman, I. and Shafiq, N. and Altan, H. and Ozarisoy, B. (2023) Modeling the Effect of Overcoming the Barriers to Passive Design Implementation on Project Sustainability Building Success: A Structural Equation Modeling Perspective. Sustainability (Switzerland), 15 (11). ISSN 20711050

Shawish, S. and Mostafa, D.B. and Al-Waked, R. and Nasif, M.S. (2023) CFD Simulation of Energy Transfer within a Membrane Heat Exchanger under Turbulent Flow. Jordan Journal of Mechanical and Industrial Engineering, 17 (2). pp. 139-154.

Patel, M.C. and Ayoub, M.A. and Idress, M.B. and Sircar, A. (2023) Development of a Novel Surfactant-Based Viscoelastic Fluid System as an Alternative Nonpolymeric Fracturing Fluid and Comparative Analysis with Traditional Guar Gum Gel Fluid. Polymers, 15 (11).

Zakaria, M.R. and Ahmad Thirmizir, M.Z. and Zainol Abidin, M.S. and Md Akil, H. and Omar, M.F. and Anjang Ab Rahman, A. and Nosbi, N. and Ab Ghafar, N. (2023) A Comparison Process Between Wet Lay-Up, Single Vacuum Bagging and Double Vacuum Bagging Toward Natural Fibre (Palm, Coconut and Kenaf) Reinforced Epoxy Composite Laminates. Fibers and Polymers, 24 (6). pp. 2107-2116.

Veza, I. and Spraggon, M. and Fattah, I.M.R. and Idris, M. (2023) Response surface methodology (RSM) for optimizing engine performance and emissions fueled with biofuel: Review of RSM for sustainability energy transition. Results in Engineering, 18. ISSN 25901230

Shar, I.A. and Memon, F.A. and Bheel, N. and Benjeddou, O. and Alwetaishi, M. (2023) Effect of used engine oil on the mechanical properties and embodied carbon of concrete blended with wheat straw ash as cementitious material. Environmental Science and Pollution Research, 30 (30). pp. 75879-75893.

Abdullah and Faye, I. and Islam, M.R. (2023) Retraction notice to �A comparative study on end-to-end deep learning methods for Electroencephalogram channel selection� Eng. Appl. Artif. Intell. 122 (2023) 106122 (Engineering Applications of Artificial Intelligence (2023) 122, (S0952197623003068), (10.1016/j.engappai.2023.106122)). Engineering Applications of Artificial Intelligence, 122. ISSN 09521976

Garba, Z.N. and Haruna, A. and Tanimu, A. and Bello, B.Z. and Zango, Z.U. (2023) Recent progress in the preparation, characterization, and applications of modified halloysite nanotubes as adsorbents for wastewater treatment. Korean Journal of Chemical Engineering, 40 (6). pp. 1247-1267. ISSN 02561115

Haruna, A. and Merican, Z.M.A. and Musa, S.G. and Rahman, M.B.A. (2023) MOF-808(Zr)-supported with Keggin Polyoxometalates as an efficient oxidative desulfurization catalyst. Journal of the Taiwan Institute of Chemical Engineers, 147.

Inayat, A. and Rocha-Meneses, L. and Ayoub, M. and Ullah, S. and Abdullah, A.Z. and Naqvi, S.R. and Bhat, A.H. (2023) Influence of Co3O4-based catalysts on N2O catalytic decomposition and NO conversion. Environmental Science and Pollution Research, 30 (28). pp. 72224-72235. ISSN 09441344

Afiq-Firdaus, A.M. and Safuan, C.D.M. and Shafie, S. and Izhar, L.I. and Awalludin, E.A. and Ahmad, M.F. and Johari, N.A.M. and Bachok, Z. (2023) Current Status of Coral Reef Fish Abundances at Pulau Bidong and Nearby Islands, South China Sea Using Stereo-Diver Operated Video System. Ocean Science Journal, 58 (2).

Thirunavukkarasu, G. and Murugesan, G. and Aziz, A.A. and Kowsikkumar, S. (2023) Quad Element Beamforming Microstrip Antenna for Indoor User Equipment Localization at 6Â GHz Band. Wireless Personal Communications, 130 (4). pp. 2471-2494. ISSN 09296212

Kasim, S.A. and Suhaili Ismail, M. and Ahmed, N. and Rashid, A. (2023) Facies analysis, petrography and textural characteristics of the onshore Paleogene-Neogene Lawin Basin, Perak, Peninsular Malaysia: Insights into palaeodepositional environment and provenance. Journal of Asian Earth Sciences: X, 9.

Seng Liew, C. and Ren Mong, G. and Wei Lim, J. and Raksasat, R. and Rawindran, H. and Hong Leong, W. and Devendran Manogaran, M. and Ho Chai, Y. and Chia Ho, Y. and Ur Rahmah, A. and Lin, C. and Shiong Khoo, K. and Kiatkittipong, W. (2023) Life cycle assessment: Sustainability of biodiesel production from black soldier fly larvae feeding on thermally pre-treated sewage sludge under a tropical country setting. Waste Management, 164. pp. 238-249.

Karim, M.A. and Abdullah, M.Z. and Deifalla, A.F. and Azab, M. and Waqar, A. (2023) An assessment of the processing parameters and application of fibre-reinforced polymers (FRPs) in the petroleum and natural gas industries: A review. Results in Engineering, 18. ISSN 25901230

Al-dhawi, B.N.S. and Kutty, S.R.M. and Baloo, L. and Alawag, A.M. and Almahbashi, N.M.Y. and Naji, G.M.A. and Alsaeedi, Y.A.A. and Al-Towayti, F.A.H. and Jagaba, A.H. (2023) Lithium adsorption from aqueous solution using aluminum hydroxide: Characterization, optimization by response surface methodology, kinetic modelling, and isotherm studies. Case Studies in Chemical and Environmental Engineering, 7.

Ruman, U.E. and Zubair, M. and Zeeshan, M.H. (2023) Analytical assessment of modulated electric flux triggered degradation of chlorfenapyr and deltamethrin pesticides in guava fruits. Analytical Biochemistry, 670. ISSN 00032697

Afzan, M. and Teh, U.N. and Nurul, I.K. (2023) Eco-friendly water treatment: The role of MIL metal�organic frameworks for the bisphenols adsorption from water. Inorganic Chemistry Communications, 152.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Jagaba, A.H. and Al-Sabaeei, A.M. (2023) Modeling and optimization of asphalt content, waste palm oil clinker powder and waste rice straw ash for sustainable asphalt paving employing response surface methodology: A pilot study. Cleaner Materials, 8.

Yamusa, I.B. and Ismail, M.S. (2023) Futuristic Structural and Lithological Constraint Mapping of Landslides Using Structural Geology and Geospatial Techniques. Journal of Geovisualization and Spatial Analysis, 7 (1). ISSN 25098810

Lim, H.Y. and Rashidi, N.A. (2023) Lignocellulosic biomass conversion into 5-hydroxymethylfurfural and 2,5-dimethylfuran, and role of the �Green� solvent. Current Opinion in Green and Sustainable Chemistry, 41.

Abdullah and Faye, I. and Islam, M.R. (2023) A comparative study on end-to-end deep learning methods for Electroencephalogram channel selection. Engineering Applications of Artificial Intelligence, 122.

Sin, J.-C. and Lam, S.-M. and Zeng, H. and Lin, H. and Li, H. and Huang, L. and Liaw, S.-J. and Mohamed, A.R. and Lim, J.-W. (2023) Construction of visible light-driven Eu-doped BiOBr hierarchical microflowers for ameliorated photocatalytic 2,4-dichlorophenol and pathogens decomposition with synchronized hexavalent chromium reduction. Materials Today Sustainability, 22.

Haque, M.A. and Zakariya, M.A. and Singh, N.S.S. and Paul, L.C. and Ishraque, M.F. (2023) Investigation of coupling loss caused by misalignment in optical fiber. Bulletin of Electrical Engineering and Informatics, 12 (3). pp. 1560-1569.

Farooqi, S.A. and Farooqi, A.S. and Sajjad, S. and Yan, C. and Victor, A.B. (2023) Electrochemical reduction of carbon dioxide into valuable chemicals: a review. Environmental Chemistry Letters, 21 (3). pp. 1515-1553.

Haque, M.A. and Zakariya, M.A. and Singh, N.S.S. and Rahman, M.A. and Paul, L.C. (2023) Parametric study of a dual-band quasi-Yagi antenna for LTE application. Bulletin of Electrical Engineering and Informatics, 12 (3). pp. 1513-1522.

Masrom, S. and Rahman, R.A. and Baharun, N. and Rohani, S.R.S. and Rahman, A.S.A. (2023) Machine learning with task-technology fit theory factors for predicting students� adoption in video-based learning. Bulletin of Electrical Engineering and Informatics, 12 (3). pp. 1666-1673.

Waqar, A. and Bheel, N. and Shafiq, N. and Othman, I. and Khan, M.B. and Mansoor, M.S. and Benjeddou, O. and Yaseen, G. (2023) Effect of volcanic pumice powder ash on the properties of cement concrete using response surface methodology. Journal of Building Pathology and Rehabilitation, 8 (1).

Al-dhawi, B.N.S. and Kutty, S.R.M. and Ghaleb, A.A.S. and Almahbashi, N.M.Y. and Saeed, A.A.H. and Al-Mekhlafi, A.-B.A. and Alsaeedi, Y.A.A. and Jagaba, A.H. (2023) Pretreated palm oil clinker as an attached growth media for organic matter removal from synthetic domestic wastewater in a sequencing batch reactor. Case Studies in Chemical and Environmental Engineering, 7.

Ali, R.F. and Muneer, A. and Almaghthawi, A. and Alghamdi, A. and Fati, S.M. and Ghaleb, E.A.A. (2023) BMSP-ML: big mart sales prediction using different machine learning techniques. IAES International Journal of Artificial Intelligence, 12 (2). pp. 874-883. ISSN 20894872

YAHAYA, S.M. and MAHMUD, A.A. and ABDULLAHI, M. and HARUNA, A. (2023) Recent advances in the chemistry of nitrogen, phosphorus and potassium as fertilizers in soil: A review. Pedosphere, 33 (3). pp. 385-406.

Danish, M. and Al-Amin, M. and Abdul-Rani, A.M. and Rubaiee, S. and Ahmed, A. and Zohura, F.T. and Ahmed, R. and Yildirim, M.B. (2023) Optimization of hydroxyapatite powder mixed electric discharge machining process to improve modified surface features of 316L stainless steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 237 (3). pp. 881-895.

Shahzad, K. and Shah, S.Q.A. and Lai, F.-W. and Jan, A.A. and Shah, S.A.A. and Shad, M.K. (2023) Exploring the nexus of corporate governance and intellectual capital efficiency: from the lens of profitability. Quality and Quantity, 57 (3). pp. 2447-2468. ISSN 00335177

Salman, H.M. and Wan Ahmad, W.F. and Sulaiman, S. (2023) A design framework of a smartphone user interface for elderly users. Universal Access in the Information Society, 22 (2). pp. 489-509.

Hussain, M. and Zabiri, H. and Uddin, F. and Yusup, S. and Tufa, L.D. (2023) Pilot-scale biomass gasification system for hydrogen production from palm kernel shell (part B): dynamic and control studies. Biomass Conversion and Biorefinery, 13 (9). pp. 8173-8195.

Yavari, S. and Kamyab, H. and Asadpour, R. and Yavari, S. and Sapari, N.B. and Baloo, L. and Manan, T.S.B.A. and Ashokkumar, V. and Chelliapan, S. (2023) The fate of imazapyr herbicide in the soil amended with carbon sorbents. Biomass Conversion and Biorefinery, 13 (9). pp. 7561-7569.

Shaik, N.B. and Benjapolakul, W. and Asdornwised, W. and Chaitusaney, S. and Elsmany, E.F.A. and Bingi, K. (2023) A Theoretical Approach to Optimize the Pipeline Data Communication in Oil and Gas Remote Locations Using Sky X Technology. Engineering Journal, 27 (5). pp. 29-36.

Irfan, M. and Ghalib, S.A. and Waqas, S. and Khan, J.A. and Rahman, S. and Faraj Mursal, S.N. and Ghanim, A.A.J. (2023) Response Surface Methodology for the Synthesis and Characterization of Bio-Oil Extracted from Biomass Waste and Upgradation Using the Rice Husk Ash Catalyst. ACS Omega, 8 (20). pp. 17869-17879.

Nadarajah, R. and Hossain, M.S. and Siddique, M.B.M. and Arafath, M.A. and Naushad, M. and Lim, J.W. and Al-Gheethi, A. and Ahmad, H. (2023) A review on environmental chemodynamics, isothermal, kinetics, and thermodynamics modeling for the adsorptive removal of Cr(vi) from the industrial effluent using magnetic nanoparticles as a bio-sorbent. Environmental Science: Water Research and Technology, 9 (7). pp. 1764-1782.

Beheshti, M. and Saeidi, M. and Adel-Rastkhiz, M. and Shahrestani, S. and Zarrabi, A. and Bai, J. and Simchi, A. and Akbarmolaie, S. (2023) Efficient electrochemical CO2 conversion by cobalt-based metal organic frameworks modified by bimetallic gold-silver nanostructures. Catalysis Science and Technology, 13 (12). pp. 3645-3654.

Singh, R.K.J. and Hui, K.C. and Salleh, N.K.M. and Peechmani, P. and Aziz, F. and Abdullah, H. and Rosli, A.N. and Sambudi, N.S. (2023) The synthesis of oxalate-modified pyrite/chitosan as an antibacterial composite. Bioinspired, Biomimetic and Nanobiomaterials, 12 (2). pp. 94-103. ISSN 20459858

Al-Selwi, S.M. and Hassan, M.F. and Abdulkadir, S.J. and Muneer, A. (2023) LSTM Inefficiency in Long-Term Dependencies Regression Problems. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (3). pp. 16-31.

Qureshi, F. and Yusuf, M. and Arham Khan, M. and Ibrahim, H. and Ekeoma, B.C. and Kamyab, H. and Rahman, M.M. and Nadda, A.K. and Chelliapan, S. (2023) A State-of-The-Art Review on the Latest trends in Hydrogen production, storage, and transportation techniques. Fuel, 340.

Ab Rahim, A.H. and Yunus, N.M. and Jaffar, Z. and Allim, M.F. and Othman Zailani, N.Z. and Mohd Fariddudin, S.A. and Abd Ghani, N. and Umar, M. (2023) Synthesis and characterization of ammonium-based protic ionic liquids for carbon dioxide absorption. RSC Advances, 13 (21). pp. 14268-14280.

Chinda, F.E. and Seoung, S. and Cheab, S. and Yahya, M.S. and Hawari, H.F. (2023) Design of Compact Parallel-Connected Chained Function Filters. Journal of Electromagnetic Engineering and Science, 23 (3). pp. 283-293.

Jayabalan, L. and Mustapha, M. and Mokhtar, A.A. (2023) DISCRETE EVENT SIMULATION MODELLING AS AN IMPROVEMENT VALIDATION TOOL ON PRINTED CIRCUIT BOARD MECHANICAL ASSEMBLY PROCESS. ARPN Journal of Engineering and Applied Sciences, 18 (9). pp. 1078-1088. ISSN 18196608

Al-Shami, T.M. and Jufar, S.R. and Abdullahi, M.B. and Negash, B.M. (2023) A Study on the Production Performance of a Horizontal Shale Gas Well Using a Fully Coupled Flow and Geomechanics Modelling. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105 (2). pp. 146-165.

Wong, K.-H. and Lai, W. and Ng, J.-H. and Fazlizan, A. and Sopian, K. and Sahoo, N. (2023) Open-Loop Subsonic Suction Type Wind Tunnel: Design, Simulation, Build and Test. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105 (2). pp. 204-223.

Ishak, M.A. and Abdul Latiff, A.H. and Ho, E.T.W. and Fuad, M.I.A. and Tan, N.W. and Sajid, M. and Elsebakhi, E. (2023) Advanced Elastic and Reservoir Properties Prediction through Generative Adversarial Network. Applied Sciences (Switzerland), 13 (10).

Nordin, S.M. and Mokhtar, N.I. and Priyadi, U. and Tarjo, T. and Wan Ahmad, W.F. and Ahmad Rizal, A.R. (2023) Communicating Sustainable Brand Equity in a High Carbon Footprint and High-Risk Sector: Comparing Malaysia and Indonesia Oil and Gas Industry. Sustainability (Switzerland), 15 (10).

Islam, M.T. and Alam, M.A. and Lipu, M.S.H. and Hasan, K. and Meraj, S.T. and Masrur, H. and Rahman, M.F. (2023) A Single DC Source Five-Level Switched Capacitor Inverter for Grid-Integrated Solar Photovoltaic System: Modeling and Performance Investigation. Sustainability (Switzerland), 15 (10).

Hussain, H.H. and Sulaiman, S.A. and Chala, G.T. and Husin, H. (2023) Effect of Crude Oil and Nitrogen Gas Flow Rates on the Time Taken for Flow Initiation of Waxy Crude Oil. Processes, 11 (5).

Abdul Manaf, A.S. and Mostapha, M. and Ameen, M. and Yusup, S. and Amran, N.A. (2023) Optimization Study of Glucose Synthesis to 5-Hydroxymethylfurfural (5-HMF) by Using Low Transition-Temperature Mixtures (LTTM). Catalysts, 13 (5).

Waqar, A. and Othman, I. and González-Lezcano, R.A. (2023) Challenges to the Implementation of BIM for the Risk Management of Oil and Gas Construction Projects: Structural Equation Modeling Approach. Sustainability (Switzerland), 15 (10). ISSN 20711050

Ravindran, G. and Mahesh, V. and Bheel, N. and Chittimalla, S. and Srihitha, K. and Sushmasree, A. (2023) Usage of Natural Fibre Composites for Sustainable Material Development: Global Research Productivity Analysis. Buildings, 13 (5). ISSN 20755309

Almakayeel, N. and Buniya, M.K. and Abubakar, A.S. and Kamil, S.M. and Qureshi, K.M. and Qureshi, M.R.N.M. (2023) Modelling the Construction Projects Implementation Barriers: A Structure Equation Modelling Approach. Buildings, 13 (5).

Waqas, S. and Harun, N.Y. and Sambudi, N.S. and Bilad, M.R. and Abioye, K.J. and Ali, A. and Abdulrahman, A. (2023) A Review of Rotating Biological Contactors for Wastewater Treatment. Water (Switzerland), 15 (10).

Khalid, A.M. and Hossain, M.S. and Khalil, N.A. and Zulkifli, M. and Arafath, M.A. and Shaharun, M.S. and Ayub, R. and Ahmad Yahaya, A.N. and Ismail, N. (2023) Adsorptive Elimination of Heavy Metals from Aqueous Solution Using Magnetic Chitosan/Cellulose-Fe(III) Composite as a Bio-Sorbent. Nanomaterials, 13 (10).

Abu Hussein, N.A. and Wong, Y.H. and Burhanudin, Z.A. and Hawari, H.F. (2023) Ternary Hybrid Materials for Highly Sensitive Acetone Sensing at Room Temperature. Crystals, 13 (5).

Wikantyasning, E.R. and Setiyadi, G. and Pramuningtyas, R. and Kurniawati, M.D. and Ho, C.Y. (2023) FORMULATION OF NANOEMULGEL CONTAINING EXTRACT OF IMPATIENTS BALSAMINA L. AND ITS ANTIBACTERIAL ACTIVITY. International Journal of Applied Pharmaceutics, 15 (3). pp. 67-70.

Masor, A.E. and Nasir, R. and Mannan, H.A. and Qadir, D. and Sharif, R. and Mohshim, D.F. and Mukhtar, H. and Muhammad, A. (2023) Performance optimization of polyetherimide-zeolite 4A mixed matrix membranes for carbon dioxide/methane separation process using response surface methodology Leistungsoptimierung von Polyetherimid-Zeolith-4A-Mischmatrixmembranen für die Abscheidung von Kohlenstoffdioxid und Methan mit Hilfe der Antwortflächenmethode. Materialwissenschaft und Werkstofftechnik, 54 (5). pp. 571-585.

Gabayan, R.C.M. and Sulaimon, A.A. and Jufar, S.R. (2023) Application of Bio-Derived Alternatives for the Assured Flow of Waxy Crude Oil: A Review. Energies, 16 (9).

Waqar, A. and Skrzypkowski, K. and Almujibah, H. and Zagórski, K. and Khan, M.B. and Zagórska, A. and Benjeddou, O. (2023) Success of Implementing Cloud Computing for Smart Development in Small Construction Projects. Applied Sciences (Switzerland), 13 (9).

Chaichan, M.T. and Kazem, H.A. and Al-Ghezi, M.K.S. and Al-Waeli, A.H.A. and Ali, A.J. and Sopian, K. and Kadhum, A.A.H. and Isahak, W.N.R.W. and Takriff, M.S. and Al-Amiery, A.A. (2023) Effect of Different Preparation Parameters on the Stability and Thermal Conductivity of MWCNT-Based Nanofluid Used for Photovoltaic/Thermal Cooling. Sustainability (Switzerland), 15 (9). ISSN 20711050

Mumtaz, F. and Yahaya, N.Z. and Meraj, S.T. and Singh, N.S.S. and Rahman, M.S. and Hossain Lipu, M.S. (2023) A High Voltage Gain Interleaved DC-DC Converter Integrated Fuel Cell for Power Quality Enhancement of Microgrid. Sustainability (Switzerland), 15 (9).

Rahman, T. and Mansur, A.A. and Hossain Lipu, M.S. and Rahman, M.S. and Ashique, R.H. and Houran, M.A. and Elavarasan, R.M. and Hossain, E. (2023) Investigation of Degradation of Solar Photovoltaics: A Review of Aging Factors, Impacts, and Future Directions toward Sustainable Energy Management. Energies, 16 (9). ISSN 19961073

Numin, M.S. and Jumbri, K. and Kee, K.E. and Hassan, A. and Borhan, N. and Matmin, J. (2023) DFT Calculation and MD Simulation Studies on Gemini Surfactant Corrosion Inhibitor in Acetic Acid Media. Polymers, 15 (9).

Effendi, A.D. and Md Yusof, M.A. and Abd Mutalib, N.F. and Sia, C.W. (2023) Amidated Pectic Polysaccharides (Pectin) as Methane Hydrate Inhibitor at Constant Cooling and Isobaric Condition. Polymers, 15 (9).

Chaichan, M.T. and Kazem, H.A. and Al-Waeli, A.H.A. and Sopian, K. and Fayad, M.A. and Alawee, W.H. and Dhahad, H.A. and Isahak, W.N.R.W. and Al-Amiery, A.A. (2023) Sand and Dust Storms� Impact on the Efficiency of the Photovoltaic Modules Installed in Baghdad: A Review Study with an Empirical Investigation. Energies, 16 (9). ISSN 19961073

Lakhina, U. and Badruddin, N. and Elamvazuthi, I. and Jangra, A. and Huy, T.H.B. and Guerrero, J.M. (2023) An Enhanced Multi-Objective Optimizer for Stochastic Generation Optimization in Islanded Renewable Energy Microgrids. Mathematics, 11 (9).

Hafizi, Z.M. and Ibrahim, I.N. and Vorathin, E. (2023) DELAMINATION DETECTION IN THIN-WALLED COMPOSITE STRUCTURES USING ACOUSTIC PITCH-CATCH TECHNIQUE WITH FIBER BRAGG GRATING SENSORS. Jurnal Teknologi, 85 (3). pp. 35-42.

Soh, M. and Phang, F.J.F. and Chai, Y.H. and Chew, J.J. and Loh, S.K. and Yusup, S. and Yu, A. and Sunarso, J. (2023) Reaction mechanisms of the wet torrefaction of oil palm trunks under the effect of initial pressurisation. Chemical Engineering Research and Design, 193. pp. 493-506.

Zhang, S. and Omar, A.H. and Hashim, A.S. and Alam, T. and Khalifa, H.A.E.-W. and Elkotb, M.A. (2023) Enhancing waste management and prediction of water quality in the sustainable urban environment using optimized algorithm of least square support vector machine and deep learning techniques. Urban Climate, 49.

Mohamad, H. and Beddelee, A.A.A.M. and Ghazali, M.F. and Lee, H.E. and Chaiyasarn, K. and Nasir, M.Y.M. (2023) Distributed fibre optic inclinometer with cloud-based monitoring system. Engineering Science and Technology, an International Journal, 41.

Hashlamon, I. and Nikbakht, E. (2023) Theoretical and numerical investigation of bridge frequency identification employing an instrumented vehicle in stationary and moving states. Structures, 51. pp. 1684-1693. ISSN 23520124

Wang, Y. and Wang, X. and Ariffin, M.M. and Abolfathi, M. and Alqhatani, A. and Almutairi, L. (2023) Attack detection analysis in software-defined networks using various machine learning method. Computers and Electrical Engineering, 108. ISSN 00457906

Chandran, D. and Raviadaran, R. and Lau, H.L.N. and Numan, A. and Elumalai, P.V. and Samuel, O.D. (2023) Corrosion characteristic of stainless steel and galvanized steel in water emulsified diesel, diesel and palm biodiesel. Engineering Failure Analysis, 147.

Liew, C.S. and Mong, G.R. and Lim, J.W. and Raksasat, R. and Rawindran, H. and Hassan, M.A. and Lam, M.K. and Khoo, K.S. and Zango, Z.U. (2023) Low-temperature thermal pre-treated sewage sludge for feeding of black soldier fly (Hermetia illucens) larvae: Protein, lipid and biodiesel profile and characterization. Renewable and Sustainable Energy Reviews, 178.

Sze Yin, G.G. and Aqilah, N.F. and Mat Nawi, N.I. and Mohd Hizam, S. and Md Nordin, N.A.H. and Bilad, M.R. and Adi Putra, Z. and Jaafar, J. and Yusof, N. and Hamid, N.A. and Mokhtar, N.M. (2023) Incorporation of Hydrophobic Silica in a Polyvinylidene Fluoride Membrane: Membrane Development and Performance Modeling. Chemical Engineering and Technology, 46 (5). pp. 1005-1016.

Loh, S.R. and Tan, I.S. and Foo, H.C.Y. and Tan, Y.H. and Lam, M.K. and Lim, S. (2023) Exergy analysis of a holistic zero waste macroalgae-based third-generation bioethanol biorefinery approach: Biowaste to bioenergy. Environmental Technology and Innovation, 30.

Tabaaza, G.A. and Tackie-Otoo, B.N. and Zaini, D.B. and Otchere, D.A. and Lal, B. (2023) Application of machine learning models to predict cytotoxicity of ionic liquids using VolSurf principal properties. Computational Toxicology, 26.

A. Razak, A.A. and M. Saaid, I. and Md. Yusof, M.A. and Husein, N. and Zaidin, M.F. and Mohamad Sabil, K. (2023) Physical and chemical effect of impurities in carbon capture, utilisation and storage. Journal of Petroleum Exploration and Production Technology, 13 (5). pp. 1235-1246.

Heng, H.Y. and Zaini, M.F. and Rebecca, L.W.X. and Bakar, M.A.A. and Saheed, M.S.M. and Ibrahim, A.R. and Ahmed, N.M. and Abdullah, M. (2023) A green and facile synthesis of lead-free hybrid organic-inorganic bismuth halides quantum dots for nanophotonics applications. Photonics and Nanostructures - Fundamentals and Applications, 54.

Soni, A. and Das, P.K. and Yusuf, M. and Ridha, S. and Kamyab, H. and Alam, M.A. and Masood, F. and Chelliapan, S. and Ubaidullah, M. and Pandit, B. and Prakash, C. (2023) Synergy of silica sand and waste plastics as thermoplastic composites on abrasive wear characteristics under conditions of different loads and sliding speeds. Chemosphere, 323.

Afolabi, L.O. and Enweremadu, C.C. and Kareem, M.W. and Arogundade, A.I. and Irshad, K. and Islam, S. and Oladosu, K.O. and Elfaghi, A.M. and Didane, D.H. (2023) Experimental investigation of double slope solar still integrated with PCM nanoadditives microencapsulated thermal energy storage. Desalination, 553.

Mahmad, A. and Zango, Z.U. and Noh, T.U. and Usman, F. and Aldaghri, O.A. and Ibnaouf, K.H. and Shaharun, M.S. (2023) Response surface methodology and artificial neural network for prediction and validation of bisphenol a adsorption onto zeolite imidazole framework. Groundwater for Sustainable Development, 21.

Al-Kayiem, H.H. and Mohamed, M.M. and Gilani, S.I.U. (2023) State of the Art of Hybrid Solar Stills for Desalination. Arabian Journal for Science and Engineering, 48 (5). pp. 5709-5755.

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Muhsan, A.S. and Abdulkadir, S.J. and Hussein, I.A. and Salih, A.A. (2023) Prediction of critical total drawdown in sand production from gas wells: Machine learning approach. Canadian Journal of Chemical Engineering, 101 (5). pp. 2493-2509.

Rather, S.-U. and Rahman, M.H. and Bamufleh, H.S. and Alhumade, H. and Taimoor, A.A. and Saeed, U. and Sulaimon, A.A. and Alalayah, W.M. and Shariff, A.M. and Hoque, M.A. (2023) Physicochemical approaches reveal the impact of electrolytes and hydrotropic salt on micellization and phase separation behavior of polymer polyvinyl alcohol and surfactant mixture. International Journal of Biological Macromolecules, 235.

Alhawari, A.R.H. and Saeidi, T. and Ismail, I. and Alsuwian, T. and Al-Gburi, A.J.A. (2023) Health Control of Tree Trunk Utilizing Microwave Imaging and Reverse Problem Algorithms. ACS Omega, 8 (16). pp. 14387-14400.

Ilyas, S.U. and Shamsuddin, R. and Kai Xiang, T. and Estellé, P. and Pendyala, R. (2023) Rheological profile of graphene-based nanofluids in thermal oil with hybrid additives of carbon nanotubes and nanofibers. Journal of Molecular Liquids, 376.

Haruna, A. and Merican, Z.M.A. and Musa, S.G. (2023) Remarkable stability and catalytic performance of PW11M@MOF-808 (M=Mn and Cu) nanocomposites for oxidative desulfurization of fuel oil. Molecular Catalysis, 541.

Kamaruddin, N.A.L. and Taha, M.F. and Romil, A.M. and Mohd Rasdi, F.L. (2023) Synthesis and characterization of novel solid-supported salicylate-based ionic liquid for adsorptive removal of Pb(ii) and Ni(ii) ions from aqueous solution. RSC Advances, 13 (17). pp. 11249-11260.

Mohd Musa, M.S. and Gopalan, P.Y. and Yekeen, N. and Al-Yaseri, A. (2023) Influence of Henna Extracts on Static and Dynamic Adsorption of Sodium Dodecyl Sulfate and Residual Oil Recovery from Quartz Sand. ACS Omega, 8 (14). pp. 13118-13130. ISSN 24701343

Yekeen, N. and Ali Elakkari, A.M. and Khan, J.A. and Ali, M. and Al-Yaseri, A. and Hoteit, H. (2023) Experimental and Computational Fluid Dynamics Investigation of Mechanisms of Enhanced Oil Recovery via Nanoparticle-Surfactant Solutions. Energy and Fuels, 37 (7). pp. 5114-5129.

Hussain, K. and Abbasi, A.Z. and Rasoolimanesh, S.M. and Schultz, C.D. and Ting, D.H. and Ali, F. (2023) Local food consumption values and attitude formation: the moderating effect of food neophilia and neophobia. Journal of Hospitality and Tourism Insights, 6 (2). pp. 464-491. ISSN 25149792

Ahmad, A. and Sari, M.Y.A. and Sakidin, H. and Sufahani, S.F. and Amin, A.R.M. and Rasib, A.W. (2023) CLASSIFICATION OF OBJECTS WITHIN AGRICULTURAL LANDSCAPE FROM HIGH-RESOLUTION AERIAL IMAGERY USING MAXIMUM LIKELIHOOD DISCRIMINANT RULES. ARPN Journal of Engineering and Applied Sciences, 18 (8). pp. 936-948.

Malek, A.M.A.-B. and Othman, A.R. and Othman, M.F. (2023) A Computational Technique for Low-Cycle Fatigue of LNG Mixing-Tee Weldment � An Industry Case Study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 104 (2). pp. 103-114.

Ab Rashid, S. and Tong, W.-Y. and Leong, C.-R. and Tan, W.-N. and Lee, C.-K. and Anuar, M.R. and Teo, S.-H. and Lazit, S.K.A. and Lim, J.-W. and Rozman, N.A.S. (2023) Thymol-Loaded Polymeric Nanoparticles Improve the Postharvest Microbiological Safety of Blueberries. Food Technology and Biotechnology, 61 (2). pp. 151-159.

Osman, N.A. and Pham, D.N. (2023) IMPROVING ACCURACY IN SENTIMENT ANALYSIS FOR FORMAL AND INFORMAL MALAY LANGUAGE USING SEMANTIC INFORMATION. Journal of Theoretical and Applied Information Technology, 101 (8). pp. 3009-3016. ISSN 19928645

Arzaman, A.F.M. and Damaianti, I. and Shafi, S. and Aziz, N.A.A. and Jusoh, M.H. and Kadir, F.K.A. and Baharuddin, S.A. and Hashim, H.M. and Pham, L.H.H.P. and Embong, A.M. (2023) A Systematic Review: Mirror-Mirror on the Wall, What is the Relationship between Blue Economy and Community Development? International Journal of Sustainable Development and Planning, 18 (4). pp. 991-997. ISSN 17437601

Lakhina, U. and Elamvazuthi, I. and Badruddin, N. and Jangra, A. and Truong, B.-H. and Guerrero, J.M. (2023) A Cost-Effective Multi-Verse Optimization Algorithm for Efficient Power Generation in a Microgrid. Sustainability (Switzerland), 15 (8).

Daud, S. and Wan Hanafi, W.N. and Ayodele, B.V. and Rajadurai, J. and Mustapa, S.I. and Ahmad, N.N. and Wan Abdullah, W.M.T. and Toolib, S.N. and Asha�ari, M.J. and Afsarizal, H.A. (2023) Residential Consumers� Lifestyle Energy Usage and Energy Efficiency in Selected States in Malaysia. Energies, 16 (8).

Ismail, M.F.H. and May, Z. and Asirvadam, V.S. and Nayan, N.A. (2023) Machine-Learning-Based Classification for Pipeline Corrosion with Monte Carlo Probabilistic Analysis. Energies, 16 (8).

Rehman, O.U. and Ramasamy, M.G. and Rozali, N.E.M. and Mahadzir, S. and Ghumman, A.S.M. and Qureshi, A.H. (2023) Modeling Strategies for Crude Oil-Induced Fouling in Heat Exchangers: A Review. Processes, 11 (4).

Genisa, M. and Abdullah, J.Y. and Yusoff, B.M.D. and Arief, E.M. and Hermana, M. and Utomo, C.P. (2023) Adopting Signal Processing Technique for Osteoporosis Detection Based on CT Scan Image. Applied Sciences (Switzerland), 13 (8).

Chit, V. and Tan, L.S. and Kiew, P.L. and Tsuji, T. and Funazukuri, T. and Lock, S.S.M. (2023) Advancing Process Intensification with High-Frequency Ultrasound: A Mini-Review of Applications in Biofuel Production and Beyond. Processes, 11 (4).

Janga, V.S.R. and Awang, M. and Pedapati, S.R. (2023) A Numerical Study on the Effect of Tool Speeds on Temperatures and Material Flow Behaviour in Refill Friction Stir Spot Welding of Thin AA7075-T6 Sheets. Materials, 16 (8).

Maqsoom, A. and Umer, M. and Alaloul, W.S. and Salman, A. and Ullah, F. and Ashraf, H. and Musarat, M.A. (2023) Adopting Green Behaviors in the Construction Sector: The Role of Behavioral Intention, Motivation, and Environmental Consciousness. Buildings, 13 (4).

Hisham, N.F. and Zainal Abidin, N.S. (2023) Sedimentology and Paleodepositional Environment of the Early-Middle Miocene Tanjong Formation, Southeast Sabah: Evidence from Bulk Geochemistry and Palynology Analyses. Minerals, 13 (4).

Mahtar, A. and Sulaimon, A.A. and Wilfred, C.D. (2023) Lignosulfonate-Based Ionic Liquids as Asphaltene Dispersants. Molecules, 28 (8).

Rasool, M.H. and Ahmad, M. and Ayoub, M. and Abbas, M.A. (2023) A Novel Ascorbic Acid Based Natural Deep Eutectic Solvent as a Drilling Mud Additive for Shale Stabilization. Processes, 11 (4).

Alawag, A.M. and Alaloul, W.S. and Liew, M.S. and Baarimah, A.O. and Musarat, M.A. and Al-Mekhlafi, A.-B.A. (2023) The Role of the Total-Quality-Management (TQM) Drivers in Overcoming the Challenges of Implementing TQM in Industrialized-Building-System (IBS) Projects in Malaysia: Experts� Perspectives. Sustainability (Switzerland), 15 (8). ISSN 20711050

Zainal Abidin, M.R.S. and Noh, M.H. and Moniruzzaman, M. and Goto, M. (2023) Evaluation of Crude Oil Wax Dissolution Using a Hydrocarbon-Based Solvent in the Presence of Ionic Liquid. Processes, 11 (4).

Purnomo, E.W. and Abdul Latiff, A.H. and Elsaadany, M.M.A.A. (2023) Predicting Reservoir Petrophysical Geobodies from Seismic Data Using Enhanced Extended Elastic Impedance Inversion. Applied Sciences (Switzerland), 13 (8). ISSN 20763417

Maghami, M.R. and Pasupuleti, J. and Ling, C.M. (2023) A Static and Dynamic Analysis of Photovoltaic Penetration into MV Distribution Network. Processes, 11 (4).

Adam, A.A. and Soleimani, H. and Dennis, J.O. and Aldaghri, O.A. and Alsadig, A. and Ibnaouf, K.H. and Abubakar Abdulkadir, B. and Wadi, I.A. and Cyriac, V. and Shukur, M.F.B.A. (2023) Insight into the Effect of Glycerol on Dielectric Relaxation and Transport Properties of Potassium-Ion-Conducting Solid Biopolymer Electrolytes for Application in Solid-State Electrochemical Double-Layer Capacitor. Molecules, 28 (8).

Mad Zahir, M.H. and Abdul Aziz, K.M. and Ghazali, A.R. and Abdul Latiff, A.H. (2023) Effectiveness of Fiber Optic Distributed Acoustic Sensing (DAS) in Vertical Seismic Profiling (VSP) Field Survey. Applied Sciences (Switzerland), 13 (8).

Rasool, M.H. and Ahmad, M. and Ayoub, M. (2023) Selecting Geological Formations for CO2 Storage: A Comparative Rating System. Sustainability (Switzerland), 15 (8).

Nisa, Z.U. and Chuan, L.K. and Guan, B.H. and Ahmad, F. and Ayub, S. (2023) A Comparative Study on the Crystalline and Surface Properties of Carbonized Mesoporous Coconut Shell Chars. Sustainability (Switzerland), 15 (8).

Saadon, S.Z.A.H. and Osman, N.B. (2023) Effect of Drying Pretreatment on Cellulolytic Enzymatic Hydrolysis of Lignin from Napier Grass. Processes, 11 (4).

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Usman, A. and Kaura, J.M. and Murana, A.A. and Birniwa, A.H. and Jagaba, A.H. (2023) A Comprehensive Review of Biochar Utilization for Low-Carbon Flexible Asphalt Pavements. Sustainability (Switzerland), 15 (8). ISSN 20711050

Joseph, E. and Vijaya Kumar, P.M. and Mahinder Singh, B.S. and Ching, D.L.C. (2023) Performance Monitoring Algorithm for Detection of Encapsulation Failures and Cell Corrosion in PV Modules. Energies, 16 (8).

Khan, M.B. and Waqar, A. and Bheel, N. and Shafiq, N. and Hamah Sor, N. and Radu, D. and Benjeddou, O. (2023) Optimization of Fresh and Mechanical Characteristics of Carbon Fiber-Reinforced Concrete Composites Using Response Surface Technique. Buildings, 13 (4). ISSN 20755309

Moshikur, R.M. and Carrier, R.L. and Moniruzzaman, M. and Goto, M. (2023) Recent Advances in Biocompatible Ionic Liquids in Drug Formulation and Delivery. Pharmaceutics, 15 (4). ISSN 19994923

Zaulkiflee, N.D. and Ahmad, A.L. and Che Lah, N.F. and Low, S.C. and Norikazu, N. (2023) Collation of PANI as electrode material for supercapacitor: effect of different substrate and its performances. Journal of Materials Science: Materials in Electronics, 34 (12).

Nisa, Z.U. and Chuan, L.K. and Guan, B.H. and Ahmad, F. and Ayub, S. (2023) Experimental Correlation of the Role of Synthesized Biochar on Thermal, Morphological, and Crystalline Properties of Coagulation Processed Poly(1,4-phenylene sulfide) Nanocomposites. Polymers, 15 (8).

Faqih, M. and Omar, M.B. and Ibrahim, R. (2023) Prediction of Dry-Low Emission Gas Turbine Operating Range from Emission Concentration Using Semi-Supervised Learning. Sensors, 23 (8).

Bhattad, A. and Rao, B.N. and Atgur, V. and Veza, I. and Zamri, M.F.M.A. and Fattah, I.M.R. (2023) Thermal Performance Evaluation of Plate-Type Heat Exchanger with Alumina�Titania Hybrid Suspensions. Fluids, 8 (4).

Abbasi, I.A. and Ashari, H. and Yusuf, I. (2023) System Dynamics Modelling: Integrating Empty Fruit Bunch Biomass Logistics to Reduce GHG Emissions. Resources, 12 (4).

Hussain, A. and Faye, I. and Muthuvalu, M.S. and Tang, T.B. and Zafar, M. (2023) Advancements in Numerical Methods for Forward and Inverse Problems in Functional near Infra-Red Spectroscopy: A Review. Axioms, 12 (4).

Raza, A. and Altaf, K. and Ahmad, F. and Shahed, C.A. and Ahmed, S.W. (2023) STUDY AND ANALYSIS OF METAL PARTS FABRICATED THROUGH FUSED DEPOSITION MODELLING, DE-BINDING AND SINTERING PROCESSES. Journal of Engineering Science and Technology, 18 (2). pp. 827-843.

Irfan, M. and Khan, J.A. and Al-Kayiem, H.H. and Waqas, S. and Aleem, W. and Rozali, N.E.M. and Qamar, S. and Ghanim, A.A.J. and Ginter-Kramarczyk, D. and Legutko, S. and Kruszelnicka, I. and Rahman, S. (2023) Characteristics of Malaysian Crude Oils and Measurement of ASP Flooded Water in Oil Emulsion Stability and Viscosity in Primary Separator. Water (Switzerland), 15 (7).

Abdullah, W.N.A.S. and Mohd Nawi, N.S. and Lau, W.J. and Ho, Y.C. and Aziz, F. and Ismail, A.F. (2023) Enhancing Physiochemical Substrate Properties of Thin-Film Composite Membranes for Water and Wastewater Treatment via Engineered Osmosis Process. Polymers, 15 (7).

Al-Ashmori, Y.Y. and Othman, I. and Al-Aidrous, A.-H.M.H. (2023) Correction:. �Values, Challenges, and Critical Success Factors� of Building Information Modelling (BIM) in Malaysia: Experts Perspective(Sustainability, (2022), 14, (3192), 10.3390/su14063192). Sustainability (Switzerland), 15 (7). ISSN 20711050

Vijaya Kumar, S.D. and Karuppanan, S. and Perumal, V. and Ovinis, M. (2023) Failure Pressure Prediction of Corroded High-Strength Steel Pipe Elbow Subjected to Combined Loadings Using Artificial Neural Network. Mathematics, 11 (7).

Manogaran, M.D. and Hakimi, M. and Basheer Ahmad, M.H.N. and Shamsuddin, R. and Lim, J.W. and M Hassan, M.A. and Sahrin, N.T. (2023) Effect of Temperature on Co-Anaerobic Digestion of Chicken Manure and Empty Fruit Bunch: A Kinetic Parametric Study. Sustainability (Switzerland), 15 (7).

Tijjani Usman, I.M. and Lee, F.-W. and Ho, Y.-C. and Khaw, H.-P. and Chong, Q.-W. and Kee, Y.-M. and Lim, J.-W. and Show, P.-L. (2023) Evaluation of Annona diversifolia Seed Extract as A Natural Coagulant for Water Treatment. Sustainability (Switzerland), 15 (7).

Che Su, N. and Basirun, A.A. and Hameed Sultan, N.S. and Kanakaraju, D. and Wilfred, C.D. (2023) Modified Nanocellulose-Based Adsorbent from Sago Waste for Diclofenac Removal. Sustainability (Switzerland), 15 (7).

Saleh, S.S.M. and Omar, M.F. and Akil, H.M. and Kudus, M.H.A. and Abdullah, M.M.A.B. and Sandu, A.V. and Vizureanu, P. and Halim, K.A.A. and Rasidi, M.S.M. and Mahamud, S.N.S. and Sandu, I. and Nosbi, N. (2023) Preparation of Carbon Nanotubes/Alumina Hybrid-Filled Phenolic Composite with Enhanced Wear Resistance. Materials, 16 (7).

Dwarshala, S.K.R. and Rajakumar, S.S. and Kummitha, O.R. and Venkatesan, E.P. and Veza, I. and Samuel, O.D. (2023) A Review on Recent Developments of RCCI Engines Operated with Alternative Fuels. Energies, 16 (7). ISSN 19961073

Hassan, A. and Pedapati, S.R. and Awang, M. and Soomro, I.A. (2023) A Comprehensive Review of Friction Stir Additive Manufacturing (FSAM) of Non-Ferrous Alloys. Materials, 16 (7).

Alsaiari, M. and Nwafor, B.O. and Hermana, M. and Hassan H. M, A.M. and Irfan, M. (2023) Understanding the Mechanisms of Earth Fissuring for Hazard Mitigation in Najran, Saudi Arabia. Sustainability (Switzerland), 15 (7).

Mohd Laziz, A. and Chuah, C.Y. and Denecke, J. and Bilad, M.R. and Ku Shaari, K.Z. (2023) Investigation of Mass-Transfer Performance for Biodiesel Reaction in Microchannel Reactor using Volume-of-Fluid with Species-Transport Model. Sustainability (Switzerland), 15 (7).

Aslam, F. and Jamil, K. and Htwe, O. and Yuliawiratman, B.S. and Natarajan, E. and Elamvazuthi, I. and Naicker, A.S. (2023) Postsurgical Analysis of Gait, Radiological, and Functional Outcomes in Children with Developmental Dysplasia of the Hip. Sensors, 23 (7). ISSN 14248220

Ismail, M. and Bustam, M.A. and Kari, N.E.F. and Yeong, Y.F. (2023) Ideal Adsorbed Solution Theory (IAST) of Carbon Dioxide and Methane Adsorption Using Magnesium Gallate Metal-Organic Framework (Mg-gallate). Molecules, 28 (7).

Uddin, S. and Islam, M.R. and Moshikur, R.M. and Wakabayashi, R. and Moniruzzaman, M. and Goto, M. (2023) Modification with Conventional Surfactants to Improve a Lipid-Based Ionic-Liquid-Associated Transcutaneous Anticancer Vaccine. Molecules, 28 (7).

Bheel, N. and Benjeddou, O. and Almujibah, H.R. and Abbasi, S.A. and Sohu, S. and Ahmad, M. and Sabri Sabri, M.M. (2023) Effect of calcined clay and marble dust powder as cementitious material on the mechanical properties and embodied carbon of high strength concrete by using RSM-based modelling. Heliyon, 9 (4).

Noor, A. and Mohamed Kutty, S.R. and Baloo, L. and Affam, A.C. and Jagaba, A.H. and Saeed Ghaleb, A.A. and Yahya Almahbashi, N.M. and Ahmad, T. and Nawab, M.S. and Birniwa, A.H. (2023) Parametric optimization of additive manufactured biocarrier submerged in sequencing batch reactor for domestic wastewater treatment. Heliyon, 9 (4).

Hasnen, S.H. and Shahid, M. and Zabiri, H. and Taqvi, S.A.A. (2023) Semi-supervised adaptive PLS soft-sensor with PCA-based drift correction method for online valuation of NOx emission in industrial water-tube boiler. Process Safety and Environmental Protection, 172. pp. 787-801.

Ibrahim, O. and Bakare, M.S. and Amosa, T.I. and Otuoze, A.O. and Owonikoko, W.O. and Ali, E.M. and Adesina, L.M. and Ogunbiyi, O. (2023) Development of fuzzy logic-based demand-side energy management system for hybrid energy sources. Energy Conversion and Management: X, 18. ISSN 25901745

Cheng, N.F.L. and Hasanov, A.S. and Poon, W.C. and Bouri, E. (2023) The US-China trade war and the volatility linkages between energy and agricultural commodities. Energy Economics, 120.

Lawal, M. and Hassan, M.H.A. and Abdullah, W.H. and Otchere, D.A. (2023) Sedimentary facies and stratigraphy of the Campanian-Maastrichtian Taloka Formation, southeastern Iullemmeden Basin, Nigeria. Journal of African Earth Sciences, 200.

Soh, M. and Mostapha, M. and Chai, Y.H. and Khaerudini, D.S. and Phang, F.J.F. and Chew, J.J. and Loh, S.K. and Yusup, S. and Sunarso, J. (2023) Role of levulinic acid in catalytic wet torrefaction of oil palm trunks: Insights into the hydrochar physicochemical properties, liquid phase composition, and reaction mechanisms. Process Safety and Environmental Protection, 172. pp. 1087-1098.

Khan, P.A. and Johl, S.K. and Kumar, A. and Luthra, S. (2023) Hope-hype of green innovation, corporate governance index, and impact on firm financial performance: a comparative study of Southeast Asian countries. Environmental Science and Pollution Research, 30 (19). pp. 55237-55254.

Rawindran, H. and Syed, R. and Alangari, A. and Khoo, K.S. and Lim, J.W. and Sahrin, N.T. and Suparmaniam, U. and Raksasat, R. and Liew, C.S. and Leong, W.H. and Kiatkittipong, W. and Shahid, M.K. and Hara, H. and Shaharun, M.S. (2023) Mechanistic behaviour of Chlorella vulgaris biofilm formation onto waste organic solid support used to treat palm kernel expeller in the recent Anthropocene. Environmental Research, 222.

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Azella Zaine, S.N. and Khatani, M. and Yar, A. and Ahmad, W. and Hussain, M.B. and Alothman, A.A. and Saleh Mushab, M.S. (2023) Graphene loaded TiO2 submicron spheres scattering layer for efficient dye-sensitized solar cell. Chemosphere, 321.

El-Adawy, M. and Ismael, M.A. and Dalha, I.B. and Aziz, A.R.A. and El Maghlany, W. (2023) Unveiling the status of emulsified water-in-diesel and nanoparticles on diesel engine attributes. Case Studies in Thermal Engineering, 44.

Rasool, M.H. and Ahmad, M. (2023) Synthesis and physico-chemical characterization of novel Epsom salt based natural deep Eutectic solvent. Chemical Data Collections, 44.

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Zaine, S.N.A. and Yar, A. and Ahmad, W. and Irshad, M.I. and Hussain, M.B. (2023) High-yield TiO2 submicron sphere/nanoparticle-blended scattering layer for efficient and scalable dye-sensitized solar cells. Emergent Materials, 6 (2). pp. 671-679.

kumari, S. and Singh, K. and Khan, T. and Ariffin, M.M. and Mohan, S.K. and Baleanu, D. and Ahmadian, A. (2023) A Novel Approach for Continuous Authentication of Mobile Users Using Reduce Feature Elimination (RFE): A Machine Learning Approach. Mobile Networks and Applications, 28 (2). pp. 767-781. ISSN 1383469X

Chee, A.L.K. and Chin, B.L.F. and Goh, S.M.X. and Chai, Y.H. and Loy, A.C.M. and Cheah, K.W. and Yiin, C.L. and Lock, S.S.M. (2023) Thermo-catalytic co-pyrolysis of palm kernel shell and plastic waste mixtures using bifunctional HZSM-5/limestone catalyst: Kinetic and thermodynamic insights. Journal of the Energy Institute, 107.

Ahmad, T. and Iqbal, J. and Bustam, M.A. and Babar, M. and Tahir, M.B. and Sagir, M. and Irfan, M. and Anwaar Asghar, H.M. and Hassan, A. and Riaz, A. and Chuah, L.F. and Bokhari, A. and Mubashir, M. and Show, P.L. (2023) Performance evaluation of phosphonium based deep eutectic solvents coated cerium oxide nanoparticles for CO2 capture. Environmental Research, 222.

Sikiru, S. and Oladosu, T.L. and Kolawole, S.Y. and Mubarak, L.A. and Soleimani, H. and Afolabi, L.O. and Oluwafunke Toyin, A.-O. (2023) Advance and prospect of carbon quantum dots synthesis for energy conversion and storage application: A comprehensive review. Journal of Energy Storage, 60. ISSN 2352152X

Bello, U. and Amran, N.A. and Samsuri, S. and Ruslan, M.S.H. (2023) Kinetics, thermodynamic studies, and parametric effects of supercritical CO2 extraction of banana peel wastes. Sustainable Chemistry and Pharmacy, 31.

Ma, Q. and Rejab, M.R.M. and Hassan, S.A. and Azeem, M. and Saffirna, M.S. (2023) Failure Behavior Analysis of the Spherical-Roof Contoured Core (SRCC) Under Quasi-Static Loading: A Numerical Study. Journal of Failure Analysis and Prevention, 23 (2). pp. 511-519.

Ben Ghanem, O. and Shahrom Raja Shahrom, M. and Nasir Shah, S. and Ibrahim Abdul Mutalib, M. and Leveque, J.-M. and Ullah, Z. and El-Harbawi, M. and Sahban Alnarabiji, M. (2023) Greener approach for the separation of naphthenic acid from model oil using Pyrrolidinium-based amino acid ionic liquids. Fuel, 337.

Ning, Y.C. and Ridha, S. and Ilyas, S.U. and Krishna, S. and Dzulkarnain, I. and Abdurrahman, M. (2023) Application of machine learning to determine the shear stress and filtration loss properties of nano-based drilling fluid. Journal of Petroleum Exploration and Production Technology, 13 (4). pp. 1031-1052.

Liu, X. and Cai, B. and Yuan, X. and Shao, X. and Liu, Y. and Akbar Khan, J. and Fan, H. and Liu, Y. and Liu, Z. and Liu, G. (2023) A hybrid multi-stage methodology for remaining useful life prediction of control system: Subsea Christmas tree as a case study. Expert Systems with Applications, 215.

Qureshi, A.H. and Alaloul, W.S. and Wing, W.K. and Saad, S. and Ammad, S. and Altaf, M. (2023) Characteristics-Based Framework of Effective Automated Monitoring Parameters in Construction Projects. Arabian Journal for Science and Engineering, 48 (4). pp. 4731-4749.

Akande, O.N. and Gbenle, O. and Abikoye, O.C. and Jimoh, R.G. and Akande, H.B. and Balogun, A.O. and Fatokun, A. (2023) SMSPROTECT: An automatic smishing detection mobile application. ICT Express, 9 (2). pp. 168-176.

Qayyum, A. and Mazher, M. and Nuhu, A. and Benzinou, A. and Malik, A.S. and Razzak, I. (2023) Assessment of physiological states from contactless face video: a sparse representation approach. Computing, 105 (4). pp. 761-781. ISSN 0010485X

Hussain, M. and Zabiri, H. and Uddin, F. and Yusup, S. and Tufa, L.D. (2023) Pilot-scale biomass gasification system for hydrogen production from palm kernel shell (part A): steady-state simulation. Biomass Conversion and Biorefinery, 13 (5). pp. 3849-3862.

Noor, N. and Sarlan, A. and Aziz, N. (2023) GOVERNMENT REVENUE PREDICTION USING FEED FORWARD NEURAL NETWORK. Journal of Theoretical and Applied Information Technology, 101 (6). pp. 2459-2473.

Ahmad, A. and Mansor, N. and Mahmood, H. and Sharif, F. and Safdar, R. and Moniruzzaman, M. (2023) Evaluation thermal degradation kinetics of ionic liquid assisted polyetheretherketone-multiwalled carbon nanotubes composites. Journal of Applied Polymer Science, 140 (12).

Ahmed, M. and Ahmad, K.A. and Vo, D.-V.N. and Yusuf, M. and Haq, A. and Abdullah, A. and Aslam, M. and Patle, D.S. and Ahmad, Z. and Ahmad, E. and Athar, M. (2023) Recent trends in sustainable biodiesel production using heterogeneous nanocatalysts: Function of supports, promoters, synthesis techniques, reaction mechanism, and kinetics and thermodynamic studies. Energy Conversion and Management, 280.

Zango, Z.U. and Khoo, K.S. and Garba, A. and Kadir, H.A. and Usman, F. and Zango, M.U. and Da Oh, W. and Lim, J.W. (2023) A review on superior advanced oxidation and photocatalytic degradation techniques for perfluorooctanoic acid (PFOA) elimination from wastewater. Environmental Research, 221.

Liu, T. and Aniagor, C.O. and Ejimofor, M.I. and Menkiti, M.C. and Tang, K.H.D. and Chin, B.L.F. and Chan, Y.H. and Yiin, C.L. and Cheah, K.W. and Ho Chai, Y. and Lock, S.S.M. and Yap, K.L. and Wee, M.X.J. and Yap, P.-S. (2023) Technologies for removing pharmaceuticals and personal care products (PPCPs) from aqueous solutions: Recent advances, performances, challenges and recommendations for improvements. Journal of Molecular Liquids, 374. ISSN 01677322

Ahmed, R. and Rangaiah, G.P. and Mahadzir, S. and Mirjalili, S. and Hassan, M.H. and Kamel, S. (2023) Memory, evolutionary operator, and local search based improved Grey Wolf Optimizer with linear population size reduction technique. Knowledge-Based Systems, 264. ISSN 09507051

Saparin, M.A. and Ismail, M.S. (2023) Latest Ordovician to earliest Silurian graptolites of northwest Peninsular Malaysia. Journal of Paleontology, 97 (2). pp. 395-420.

Ghumman, A.S.M. and Shamsuddin, R. and Sabir, R. and Waheed, A. and Sami, A. and Almohamadi, H. (2023) Synthesis and performance evaluation of slow-release fertilizers produced from inverse vulcanized copolymers obtained from industrial waste. RSC Advances, 13 (12). pp. 7867-7876.

Shokouhi, M. and Vahidi, M. and Neshati, K. and Zhalehrajabi, E. (2023) Diffusion Coefficient and Absorption of Carbonyl Sulfide in 1-Hexyl-3-methylimidazolium Bis (Trifluoromethyl) Sulfonylimide (hmimTf2N). Journal of Chemical and Engineering Data, 68 (3). pp. 586-600. ISSN 00219568

Ayub, S. and Guan, B.H. and Ahmad, F. and Soleimani, H. and You, K.Y. and Nisa, Z.U. and Yusuf, J.Y. and Bin Hamid, M.A. (2023) Optimization of magnetite with modified graphene for microwave absorption properties. Journal of Alloys and Compounds, 936. ISSN 09258388

Al-Nini, A. and Ya, H.H. and Al-Mahbashi, N. and Hussin, H. (2023) A Review on Green Cooling: Exploring the Benefits of Sustainable Energy-Powered District Cooling with Thermal Energy Storage. Sustainability (Switzerland), 15 (6).

Tusher, H.M. and Nazir, S. and Ghosh, S. and Rusli, R. (2023) Seeking the Best Practices of Assessment in Maritime Simulator Training. TransNav, 17 (1). pp. 105-114.

Alaloul, W.S. and Qureshi, A.H. and En, Y.P. and Khan, S.A. and Musarat, M.A. and Alzubi, K.M. and Salaheen, M.A. (2023) Survey Evaluation of Building Information Modelling (BIM) for Health and Safety in Building Construction Projects in Malaysia. Sustainability (Switzerland), 15 (6). ISSN 20711050

Raheem, A.T. and Aziz, R.A.A. and Zulkifli, S.A. and Rahem, A.T. and Ayandotun, W.B. and Elfakki, S.M. and Baharom, M.B. and Zainal, E.Z. (2023) Combustion Characteristics of a Free Piston Engine Linear Generator using Various Fuel Injection Durations. Evergreen, 10 (1). pp. 594-600.

Ahmad, R.K. and Sulaiman, S.A. and Majid, A.M.B.A. and Yusuf, S. and Dol, S.S. and Inayat, M. and Umar, H.A. (2023) Assessing the Technical and Environmental Potential of Coconut Shell Biomass: Experimental Study through Pyrolysis and Gasification. Evergreen, 10 (1). pp. 585-593.

Musarat, M.A. and Alaloul, W.S. and Cher, L.S. and Qureshi, A.H. and Alawag, A.M. and Baarimah, A.O. (2023) Applications of Building Information Modelling in the Operation and Maintenance Phase of Construction Projects: A Framework for the Malaysian Construction Industry. Sustainability (Switzerland), 15 (6).

Premchand and Komiyama, M. and Aqsha and Uemura, Y. (2023) A COMPARATIVE STUDY OF OIL PALM FRONDS TORREFACTION UNDER FLUE GAS AND NITROGEN ATMOSPHERES. Journal of Oil Palm Research, 35 (1). pp. 75-85.

Qureshi, K.M. and Mewada, B.G. and Buniya, M.K. and Qureshi, M.R.N.M. (2023) Analyzing Critical Success Factors of Lean 4.0 Implementation in Small and Medium Enterprises for Sustainable Manufacturing Supply Chain for Industry 4.0 Using PLS-SEM. Sustainability (Switzerland), 15 (6).

Al-Kayiem, H.H. and Mohammed, M.N. and Kelly, K. and Riyadi, T.W.B. and Effendy, M. (2023) Experimental Assessment and Development of Thermal Comfort Model for Implication in Tropical Climate. International Journal of Computational Methods and Experimental Measurements, 11 (1). pp. 35-43.

Karaeva, A. and Magaril, E. and Al-Kayiem, H.H. (2023) Review and Comparative Analysis of Renewable Energy Policies in the European Union, Russia and the United States. International Journal of Energy Production and Management, 8 (1). pp. 11-19.

Aliyu Yaro, N.S. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Muhammad, A. and Jagaba, A.H. (2023) Modeling and optimization of rheological properties and aging resistance of asphalt binder incorporating palm oil mill waste using response surface methodology. Journal of Infrastructure Intelligence and Resilience, 2 (1).

Matmin, J. and Ibrahim, S.I. and Mohd Hatta, M.H. and Ricky Marzuki, R. and Jumbri, K. and Nik Malek, N.A.N. (2023) Starch-Derived Superabsorbent Polymer in Remediation of Solid Waste Sludge Based on Water�Polymer Interaction. Polymers, 15 (6).

Ali, A.M. and Azeem, B. and Alghamdi, A.M. and Shahzad, K. and Al-Zahrani, A.A. and Rashid, M.I. and Mahpudz, A.B. and Jamil, A. (2023) Optimization of Fluidized-Bed Process Parameters for Coating Uniformity and Nutrient-Release Characteristics of Controlled-Release Urea Produced by Modified Lignocellulosic Coating Material. Agronomy, 13 (3).

Al-Najar, J.A. and Al-Humairi, S.T. and Lutfee, T. and Balakrishnan, D. and Veza, I. and Soudagar, M.E.M. and Fattah, I.M.R. (2023) Cost-Effective Natural Adsorbents for Remediation of Oil-Contaminated Water. Water (Switzerland), 15 (6).

Hong, W.C. and Mohammed, B.S. and Abdulkadir, I. and Liew, M.S. (2023) Modeling and Optimizing the Effect of Palm Oil Fuel Ash on the Properties of Engineered Cementitious Composite. Buildings, 13 (3).

Rizkiyah, D.N. and Putra, N.R. and Idham, Z. and Aziz, A.H.A. and Che Yunus, M.A. and Veza, I. and Irianto and Chinedu Mamah, S. and Qomariyah, L. (2023) Recovery of Anthocyanins from Hibiscus sabdariffa L. Using a Combination of Supercritical Carbon Dioxide Extraction and Subcritical Water Extraction. Processes, 11 (3).

Tay, X.H. and Kasim, S. and Sutikno, T. and Fudzee, M.F.M. and Hassan, R. and Patah Akhir, E.A. and Aziz, N. and Seah, C.S. (2023) An Entropy-Based Directed Random Walk for Cancer Classification Using Gene Expression Data Based on Bi-Random Walk on Two Separated Networks. Genes, 14 (3).

Arumugam, T. and Vijaya Kumar, S.D. and Karuppanan, S. and Ovinis, M. (2023) The Influence of Axial Compressive Stress and Internal Pressure on a Pipeline Network: A Review. Applied Sciences (Switzerland), 13 (6).

Amur, Z.H. and Kwang Hooi, Y. and Bhanbhro, H. and Dahri, K. and Soomro, G.M. (2023) Short-Text Semantic Similarity (STSS): Techniques, Challenges and Future Perspectives. Applied Sciences (Switzerland), 13 (6).

Gul, I.A. and Abdul-Rani, A.M. and Al-Amin, M. and Garba, E. (2023) Elucidating Powder-Mixed Electric Discharge Machining Process, Applicability, Trends and Futuristic Perspectives. Machines, 11 (3).

Khan, M.L. and Salleh, R. and Javaid, M.U. and Arshad, M.Z. and Saleem, M.S. and Younas, S. (2023) Managing Butterfly Career Attitudes: The Moderating Interplay of Organisational Career Management. Sustainability (Switzerland), 15 (6).

Risha, M. and Tsegab, H. and Rahmani, O. and Douraghi, J. (2023) The Impact of Clay Minerals on the Porosity Distribution of Clastic Reservoirs: A Case Study from the Labuan Island, Malaysia. Applied Sciences (Switzerland), 13 (6).

Pitafi, S. and Anwar, T. and Sharif, Z. (2023) A Taxonomy of Machine Learning Clustering Algorithms, Challenges, and Future Realms. Applied Sciences (Switzerland), 13 (6).

Soleimani, H. and Yusuf, J.Y. and Chuan, L.K. and Soleimani, H. and Lutfi bin Sabar, M. and �chsner, A. and Abbas, Z. and Balogun, A.I. and Kozlowski, G. (2023) Corrigendum to �In-situ preparation of CoFe2O4 nanoparticles on eggshell membrane-activated carbon for microwave absorption� Heliyon 9 (3) (March 2023) Article e13256 (Heliyon (2023) 9(3), (S2405844023004632), (10.1016/j.heliyon.2023.e13256)). Heliyon, 9 (3).

Zakaria, M.S. and Mustapha, M. and Azmi, A.I. and Khor, C.Y. (2023) Chip Morphology and Surface Integrity in Turning AZ31 Magnesium Alloy under Dry Machining and Submerged Convective Cooling. Metals, 13 (3).

Mumtaz, F. and Yahaya, N.Z. and Meraj, S.T. and Singh, N.S.S. and Abro, G.E.M. (2023) A Novel Non-Isolated High-Gain Non-Inverting Interleaved DC�DC Converter. Micromachines, 14 (3). ISSN 2072666X

Waqar, A. and Othman, I. and Almujibah, H. and Khan, M.B. and Alotaibi, S. and Elhassan, A.A.M. (2023) Factors Influencing Adoption of Digital Twin Advanced Technologies for Smart City Development: Evidence from Malaysia. Buildings, 13 (3).

Zafar, M. and Sakidin, H. and Sheremet, M. and Dzulkarnain, I. and Nazar, R.M. and Hussain, A. and Said, Z. and Afzal, F. and Al-Yaari, A. and Khan, M.S. and Khan, J.A. (2023) The Impact of Cavities in Different Thermal Applications of Nanofluids: A Review. Nanomaterials, 13 (6).

Sajid, Z. and Karuppanan, S. and Eng, K.K. and Shah, S.Z.H. (2023) Analytical Method for the Optimization of the Open-Hole and Filled-Hole Laminates at the Preliminary Design Stage. Materials, 16 (6).

Kineber, A.F. and Othman, I. and Famakin, I.O. and Oke, A.E. and Hamed, M.M. and Olayemi, T.M. (2023) Challenges to the Implementation of Building Information Modeling (BIM) for Sustainable Construction Projects. Applied Sciences (Switzerland), 13 (6).

Ghani, S.M.M. and Rabat, N.E. and Abdul Rahim, A.R. and Johari, K. and Siyal, A.A. and Kumeresen, R. (2023) Amine Infused Fly Ash Grafted Acrylic Acid/Acrylamide Hydrogel for Carbon Dioxide (CO2) Adsorption and Its Kinetic Analysis. Gels, 9 (3).

Zafar, M. and Sakidin, H. and Sheremet, M. and Dzulkarnain, I.B. and Hussain, A. and Nazar, R. and Khan, J.A. and Irfan, M. and Said, Z. and Afzal, F. and Al-Yaari, A. (2023) Recent Development and Future Prospective of Tiwari and Das Mathematical Model in Nanofluid Flow for Different Geometries: A Review. Processes, 11 (3).

Berahim, N.H. and Zabidi, N.A.M. and Ramli, R.M. and Suhaimi, N.A. (2023) The Activity and Stability of Promoted Cu/ZnO/Al2O3 Catalyst for CO2 Hydrogenation to Methanol. Processes, 11 (3).

Abro, G.E.M. and Zulkifli, S.A.B.M. and Kumar, K. and El Ouanjli, N. and Asirvadam, V.S. and Mossa, M.A. (2023) Comprehensive Review of Recent Advancements in Battery Technology, Propulsion, Power Interfaces, and Vehicle Network Systems for Intelligent Autonomous and Connected Electric Vehicles. Energies, 16 (6).

Gayatri, R. and Fizal, A.N.S. and Yuliwati, E. and Hossain, M.S. and Jaafar, J. and Zulkifli, M. and Taweepreda, W. and Ahmad Yahaya, A.N. (2023) Preparation and Characterization of PVDF�TiO2 Mixed-Matrix Membrane with PVP and PEG as Pore-Forming Agents for BSA Rejection. Nanomaterials, 13 (6).

Mohammed, S.A.S. and Yahya, W.Z.N. and Bustam, M.A. and Kibria, M.G. (2023) Experimental and Computational Evaluation of 1,2,4-Triazolium-Based Ionic Liquids for Carbon Dioxide Capture. Separations, 10 (3).

Mohd Hizam, S.M. and Mohamed Saheed, M.S. (2023) Facile Electrochemical Approach Based on Hydrogen-Bonded MOFs-Derived Tungsten Ethoxide/Polypyrrole-Reduced GO Nanocrystal for ppb Level Ammonium Ions Detection. Chemosensors, 11 (3).

Khayrani, A.C. and Sambudi, N.S. and Wijaya, H. and Buys, Y.F. and Radini, F.A. and Jusoh, N. and Kamal, N.A. and Suhaimi, H. (2023) Review of Artificial Nacre for Oil�Water Separation. Separations, 10 (3).

Ahmad Sobri, M.Z. and Redhwan, A. and Ameen, F. and Lim, J.W. and Liew, C.S. and Mong, G.R. and Daud, H. and Sokkalingam, R. and Ho, C.-D. and Usman, A. and Nagaraju, D.H. and Rao, P.V. (2023) A Review Unveiling Various Machine Learning Algorithms Adopted for Biohydrogen Productions from Microalgae. Fermentation, 9 (3).

Hashmi, Z. and Bilad, M.R. and Fahrurrozi and Zaini, J. and Lim, J.W. and Wibisono, Y. (2023) Recent Progress in Microalgae-Based Technologies for Industrial Wastewater Treatment. Fermentation, 9 (3).

Malik, A.A. and Nasif, M.S. and Arshad, U. and Mokhtar, A.A. and Tohir, M.Z.M. and Al-Waked, R. (2023) Predictive Modelling of Wind-Influenced Dynamic Fire Spread Probability in Tank Farm Due to Domino Effect by Integrating Numerical Simulation with ANN. Fire, 6 (3).

Majid, M.F. and Mohd Zaid, H.F. and Abd Shukur, M.F. and Ahmad, A. and Jumbri, K. (2023) Host�Guest Interactions of Zirconium-Based Metal�Organic Framework with Ionic Liquid. Molecules, 28 (6).

Vijayan, D. and Aziz, I. (2023) Adaptive Hierarchical Density-Based Spatial Clustering Algorithm for Streaming Applications. Telecom, 4 (1). pp. 1-14.

Jan, A.A. and Lai, F.-W. and Siddique, J. and Zahid, M. and Ali, S.E.A. (2023) A walk of corporate sustainability towards sustainable development: a bibliometric analysis of literature from 2005 to 2021. Environmental Science and Pollution Research, 30 (13). pp. 36521-36532.

Isha, A.S.N. and Naji, G.M.A. and Saleem, M.S. and Brough, P. and Alazzani, A. and Ghaleb, E.A.A. and Muneer, A. and Alzoraiki, M. (2023) Validation of �Depression, Anxiety, and Stress Scales� and �Changes in Psychological Distress during COVID-19� among University Students in Malaysia. Sustainability (Switzerland), 15 (5).

Waqar, A. and Othman, I. and Skrzypkowski, K. and Ghumman, A.S.M. (2023) Evaluation of Success of Superhydrophobic Coatings in the Oil and Gas Construction Industry Using Structural Equation Modeling. Coatings, 13 (3). ISSN 20796412

Veza, I. and Huat, L.C. and Abas, M.A. and Idris, M. and Spraggon, M. and Herawan, S.G. (2023) Effects of Pre-Turbocharger Turbine Water Injection on the Sustainable Performance of Spark Ignition Engine. Sustainability (Switzerland), 15 (5).

Mandala, S. and Pratiwi Wibowo, A.R. and Adiwijaya and Suyanto and Zahid, M.S.M. and Rizal, A. (2023) The Effects of Daubechies Wavelet Basis Function (DWBF) and Decomposition Level on the Performance of Artificial Intelligence-Based Atrial Fibrillation (AF) Detection Based on Electrocardiogram (ECG) Signals. Applied Sciences (Switzerland), 13 (5).

Khurshid, H. and Mustafa, M.R.U. and Kilic, Z. (2023) Removal of Naphthalene, Fluorene and Phenanthrene by Recyclable Oil Palm Leaves� Waste Activated Carbon Supported Nano Zerovalent Iron (N-OPLAC) Composite in Wastewater. Water (Switzerland), 15 (5).

Prasanth, B. and Paul, R. and Kaliyaperumal, D. and Kannan, R. and Venkata Pavan Kumar, Y. and Kalyan Chakravarthi, M. and Venkatesan, N. (2023) Maximizing Regenerative Braking Energy Harnessing in Electric Vehicles Using Machine Learning Techniques. Electronics (Switzerland), 12 (5).

Waqar, A. and Othman, I. and Pomares, J.C. (2023) Impact of 3D Printing on the Overall Project Success of Residential Construction Projects Using Structural Equation Modelling. International Journal of Environmental Research and Public Health, 20 (5). ISSN 16617827

Alzoraiki, M. and Ahmad, A.R. and Ateeq, A.A. and Naji, G.M.A. and Almaamari, Q. and Beshr, B.A.H. (2023) Impact of Teachers� Commitment to the Relationship between Transformational Leadership and Sustainable Teaching Performance. Sustainability (Switzerland), 15 (5).

Ammar, S.M. and Ali, N. and Saad, M.N. and Aljunid, S.A. and Endut, R. and Alhassan, A.M. and Edet, C.O. (2023) Development of New Spectral Amplitude Coding OCDMA Code by Using Polarization Encoding Technique. Applied Sciences (Switzerland), 13 (5).

Tijjani Usman, I.M. and Ho, Y.-C. and Baloo, L. and Lam, M.-K. and Show, P.-L. and Sujarwo, W. (2023) Comprehensive Review of Modification, Optimisation, and Characterisation Methods Applied to Plant-Based Natural Coagulants (PBNCs) for Water and Wastewater Treatment. Sustainability (Switzerland), 15 (5).

Waqar, A. and Khan, M.B. and Shafiq, N. and Skrzypkowski, K. and Zagórski, K. and Zagórska, A. (2023) Assessment of Challenges to the Adoption of IOT for the Safety Management of Small Construction Projects in Malaysia: Structural Equation Modeling Approach. Applied Sciences (Switzerland), 13 (5). ISSN 20763417

Baashar, Y. and Alkawsi, G. and Wan Ahmad, W.N. and Alomari, M.A. and Alhussian, H. and Tiong, S.K. (2023) Towards Wearable Augmented Reality in Healthcare: A Comparative Survey and Analysis of Head-Mounted Displays. International Journal of Environmental Research and Public Health, 20 (5).

Alwadain, A. and Ali, R.F. and Muneer, A. (2023) Estimating Financial Fraud through Transaction-Level Features and Machine Learning. Mathematics, 11 (5).

Abbas, Y.M. and Shafiq, N. and Fares, G. and Osman, M. and Khan, M.I. and Khatib, J.M. (2023) Strength Iso-Responses of Shear-Deficient Ultra-High Performance Fiber Reinforced Concrete Beams. Sustainability (Switzerland), 15 (5).

Elmakki, T. and Zavahir, S. and Hafsa, U. and Al-Sulaiti, L. and Ahmad, Z. and Chen, Y. and Park, H. and Shon, H.K. and Ho, Y.-C. and Han, D.S. (2023) Novel LiAlO2 Material for Scalable and Facile Lithium Recovery Using Electrochemical Ion Pumping. Nanomaterials, 13 (5).

Ismail, S.N.A. and Nayan, N.A. and Mohammad Haniff, M.A.S. and Jaafar, R. and May, Z. (2023) Wearable Two-Dimensional Nanomaterial-Based Flexible Sensors for Blood Pressure Monitoring: A Review. Nanomaterials, 13 (5).

Zainuddin, N. and Ibrahim, Z.B. and Zawawi, I.S.M. (2023) Diagonal Block Method for Stiff Van der Pol Equation. IAENG International Journal of Applied Mathematics, 53 (1). ISSN 19929978

Khan, H.W. and Elgharbawy, A.A.M. and Bustam, M.A. and Goto, M. and Moniruzzaman, M. (2023) Ionic Liquid-Based Green Emulsion Liquid Membrane for the Extraction of the Poorly Soluble Drug Ibuprofen. Molecules, 28 (5).

Filho, W.L. and Wolf, F. and Totin, E. and Zvobgo, L. and Simpson, N.P. and Musiyiwa, K. and Kalangu, J.W. and Sanni, M. and Adelekan, I. and Efitre, J. and Donkor, F.K. and Balogun, A.-L. and Mucova, S.A.R. and Ayal, D.Y. (2023) Is indigenous knowledge serving climate adaptation? Evidence from various African regions. Development Policy Review, 41 (2).

Soleimani, H. and Yusuf, J.Y. and Chuan, L.K. and Soleimani, H. and bin Sabar, M.L. and �chsner, A. and Abbas, Z. and Balogun, A.I. and Kozlowski, G. (2023) In-situ preparation of CoFe2O4 nanoparticles on eggshell membrane-activated carbon for microwave absorption. Heliyon, 9 (3).

Bature, U.I. and Nawi, I.M. and Khir, M.H.M. and Zahoor, F. and Ba Hashwan, S.S. and Algamili, A.S. and Abbas, H. (2023) Analysis of thermodynamic resistive switching in ZnO-based RRAM device. Physica Scripta, 98 (3).

Ayaz, M. and Ammad-Uddin, M. and Sharif, Z. and Hijji, M. and Mansour, A. (2023) A hybrid data collection scheme to achieve load balancing for underwater sensor networks. Journal of King Saud University - Computer and Information Sciences, 35 (3). pp. 74-86.

Binhweel, F. and Pyar, H. and Senusi, W. and Shaah, M.A. and Hossain, M.S. and Ahmad, M.I. (2023) Utilization of marine ulva lactuca seaweed and freshwater azolla filiculoides macroalgae feedstocks toward biodiesel production: Kinetics, thermodynamics, and optimization studies. Renewable Energy, 205. pp. 717-730.

Bheel, N. and Ali, M.O.A. and Shafiq, N. and Almujibah, H.R. and Awoyera, P. and Benjeddou, O. and Shittu, A. and Olalusi, O.B. (2023) Utilization of millet husk ash as a supplementary cementitious material in eco-friendly concrete: RSM modelling and optimization. Structures, 49. pp. 826-841. ISSN 23520124

Barewar, S.D. and Joshi, M. and Sharma, P.O. and Kalos, P.S. and Bakthavatchalam, B. and Chougule, S.S. and Habib, K. and Saha, S.K. (2023) Optimization of jet impingement heat transfer: A review on advanced techniques and parameters. Thermal Science and Engineering Progress, 39.

Teo, Y.H. and Yap, J.H. and An, H. and Xie, N. and Chang, J. and Yu, S.C.M. and Poon, W.C. and Zhang, L. and Cheong, K.H. (2023) A simulation-aided approach in examining the viability of passive daylighting techniques on inclined windows. Energy and Buildings, 282.

Ang, P.C. and Perumal, V. and Ibrahim, M.N.M. and Adnan, R. and Mohd Azman, D.K. and Gopinath, S.C.B. and Raja, P.B. (2023) Electrochemical biosensor detection on respiratory and flaviviruses. Applied Microbiology and Biotechnology, 107 (5-6). pp. 1503-1513.

Riyadi, T.W.B. and Spraggon, M. and Herawan, S.G. and Idris, M. and Paristiawan, P.A. and Putra, N.R. and R, M.F. and Silambarasan, R. and Veza, I. (2023) Biodiesel for HCCI engine: Prospects and challenges of sustainability biodiesel for energy transition. Results in Engineering, 17. ISSN 25901230

Khan, J.A. and Padmanabhan, E. and Ul Haq, I. and Franchek, M.A. (2023) Hydraulic fracturing with low and high viscous injection mediums to investigate net fracture pressure and fracture network in shale of different brittleness index. Geomechanics for Energy and the Environment, 33.

Ayodele, E. and Okolie, C. and Akinnusi, S. and Mbu-Ogar, E. and Alani, R. and Daramola, O. and Tella, A. (2023) An assessment of the spatio-temporal dynamics of Landsat-derived aerosol concentration in relation with land cover and road networks in the Lagos megacity. Environmental Science and Pollution Research, 30 (15). pp. 43279-43299.

Waqar, A. and Bheel, N. and Almujibah, H.R. and Benjeddou, O. and Alwetaishi, M. and Ahmad, M. and Sabri, M.M.S. (2023) Effect of Coir Fibre Ash (CFA) on the strengths, modulus of elasticity and embodied carbon of concrete using response surface methodology (RSM) and optimization. Results in Engineering, 17.

Shahrin, E.W.E.S. and Narudin, N.A.H. and Shahri, N.N.M. and Nur, M. and Lim, J.-W. and Bilad, M.R. and Mahadi, A.H. and Hobley, J. and Usman, A. (2023) A comparative study of adsorption behavior of rifampicin, streptomycin, and ibuprofen contaminants from aqueous solutions onto chitosan: Dynamic interactions, kinetics, diffusions, and mechanisms. Emerging Contaminants, 9 (1).

Soomro, I.A. and Pedapati, S.R. and Awang, M. and Alam, M.A. (2023) Effects of double pulse welding on microstructure, texture, and fatigue behavior of DP590 steel resistance spot weld. International Journal of Advanced Manufacturing Technology, 125 (3-4). pp. 1271-1287.

Chong, D.J.S. and Chan, Y.J. and Arumugasamy, S.K. and Yazdi, S.K. and Lim, J.W. (2023) Optimisation and performance evaluation of response surface methodology (RSM), artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS) in the prediction of biogas production from palm oil mill effluent (POME). Energy, 266.

Abbasi, A.Z. and Tsiotsou, R.H. and Hussain, K. and Rather, R.A. and Ting, D.H. (2023) Investigating the impact of social media images� value, consumer engagement, and involvement on eWOM of a tourism destination: A transmittal mediation approach. Journal of Retailing and Consumer Services, 71. ISSN 09696989

Liaw, K.L. and Ong, K.C. and Mohd Ali Zar, M.A.B. and Lai, W.K. and Muhammad, M.F.B. and Firmansyah and Kurnia, J.C. (2023) Experimental and numerical investigation of an innovative non-combustion impulse gas turbine for micro-scale electricity generation. Energy, 266.

Inayat, A. and Jamil, F. and Ahmed, S.F. and Ayoub, M. and Abdul, P.M. and Aslam, M. and Mofijur, M. and Khan, Z. and Mustafa, A. (2023) Thermal degradation characteristics, kinetic and thermodynamic analyses of date palm surface fibers at different heating rates. Fuel, 335.

Prabowo, A. and Suparman, S. and Li, C.S. and Janan, D. and Damayanti, T.D. (2023) The effect of reading literacy to mathematics comprehension of elementary school students in Indonesia and Malaysia. International Journal of Evaluation and Research in Education, 12 (1). pp. 546-554.

Nashed, O. and Talib, N.K. and Lal, B. and Ghanem, O.B. and Mohshim, D.F. and Sabil, K.M. and Shariff, A.M. (2023) Measurement of physicochemical properties of green aqueous amino acid-based ionic liquids and their correlation with temperature and concentration. Asia-Pacific Journal of Chemical Engineering, 18 (2).

Liaw, K.L. and Kurnia, J.C. and Putra, Z.A. and Aziz, M. and Sasmito, A.P. (2023) Enhanced turbulent convective heat transfer in helical twisted Multilobe tubes. International Journal of Heat and Mass Transfer, 202.

Dahy, E. and Shafie, A. and Alharbi, W.R. and Soleimani, H. (2023) Simulation of electric field response of horizontal circular electric half wave dipole antenna for seabed logging. Alexandria Engineering Journal, 66. pp. 421-431.

Gandikota, N.S.K. and Hasan, M.H. and Jaafar, J. (2023) An adaptive metaheuristic approach for risk-budgeted portfolio optimization. IAES International Journal of Artificial Intelligence, 12 (1). pp. 305-314. ISSN 20894872

Rocha-Meneses, L. and Inayat, A. and Ayoub, M. and Ullah, S. and Naqvi, S.R. and Farrukh, S. and Mustafa, A. and Abdullah, A.Z. and Bhat, A.H. (2023) Parametric study for N2O conversion and reduction using cobalt-oxide-based catalysts. Environmental Progress and Sustainable Energy, 42 (2). ISSN 19447442

Al-Alimi, S. and Lajis, M.A. and Shamsudin, S. and Yusuf, N.K. and Altharan, Y. and Didane, D.H. and Saif, Y. and Sadeq, S. and Sabbar, H.M. and Msebawi, M.S. (2023) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering, 48 (3). pp. 3381-3389.

Mohsen Alawag, A. and Salah Alaloul, W. and Liew, M.S. and Ali Musarat, M. and Baarimah, A.O. and Saad, S. and Ammad, S. (2023) Critical Success Factors Influencing Total Quality Management In Industrialised Building System: A Case Of Malaysian Construction Industry. Ain Shams Engineering Journal, 14 (2).

Rashidi, N.A. and Yusup, S. (2023) The insights of pet cokes/palm kernel shell activated carbon as CO2 adsorbent: equilibrium, kinetics, thermodynamics, and regeneration performance. Journal of Chemical Technology and Biotechnology, 98 (3). pp. 575-582.

Ahmad, S.I. and Rashid, R. and Hashim, Z. and Meng, C.C. and Lun, C.K. and Jumaatuden, D.M.H. and Yasin, N.A. and Jati, A. and Hassim, M.H. (2023) Economic study on biohydrogen production from liquid pineapple waste. Clean Technologies and Environmental Policy, 25 (2). pp. 703-716.

Shubham, S. and Jain, N. and Gupta, V. and Mohan, S. and Ariffin, M.M. and Ahmadian, A. (2023) Identify glomeruli in human kidney tissue images using a deep learning approach. Soft Computing, 27 (5). pp. 2705-2716.

Koay, K.Y. and Poon, W.C. (2023) Students' cyberslacking behaviour in e-learning environments: the role of the Big Five personality traits and situational factors. Journal of Applied Research in Higher Education, 15 (2). pp. 521-536.

Ali, M.A. and Ting, D.H. and Isha, A.S.N. and Ahmad-Ur-Rehman, M. and Ali, S. (2023) Does service recovery matter? Relationships among perceived recovery justice, recovery satisfaction and customer affection and repurchase intentions: the moderating role of gender. Journal of Asia Business Studies, 17 (2). pp. 308-326. ISSN 15587894

Sayani, J.K.S. and English, N.J. and Khan, M.S. and Lal, B. and Kamireddi, V.R. (2023) Estimation of Thermodynamic Stability of Methane and Carbon Dioxide Hydrates in the Presence of Hydrogen Sulfide. ACS Omega, 8 (7). pp. 6218-6224. ISSN 24701343

Siddiqa, A. and Yhobu, Z. and Nagaraju, D.H. and Padaki, M. and Budagumpi, S. and Pasupuleti, V.R. and Lim, J.-W. (2023) Review and Perspectives of Sustainable Lignin, Cellulose, and Lignocellulosic Carbon Special Structures for Energy Storage. Energy and Fuels, 37 (4). pp. 2498-2519.

Shokrollahi, F. and Lau, K.K. and Partoon, B. and Lai, L.S. (2023) Elucidation of Operating Parameters Influencing the Ultrasonic-Assisted Absorption of Bulk CO2 Using Unpromoted and Promoted Methyldiethanolamine. Industrial and Engineering Chemistry Research, 62 (6). pp. 2843-2865.

Chan, Y.H. and Loy, A.C.M. and Cheah, K.W. and Chai, S.Y.W. and Ngu, L.H. and How, B.S. and Li, C. and Lock, S.S.M. and Wong, M.K. and Yiin, C.L. and Chin, B.L.F. and Chan, Z.P. and Lam, S.S. (2023) Hydrogen sulfide (H2S) conversion to hydrogen (H2) and value-added chemicals: Progress, challenges and outlook. Chemical Engineering Journal, 458.

Joju, J. and Verdi, D. and Han, W.S. and Hang, L.Y. and Soh, N. and Hampo, C.C. and Liu, N. and Yang, S.S. (2023) Sustainability assessment of feedstock powder reuse for Directed Laser Deposition. Journal of Cleaner Production, 388.

Sharif, Z. and Jung, L.T. and Razzak, I. and Alazab, M. (2023) Adaptive and Priority-Based Resource Allocation for Efficient Resources Utilization in Mobile-Edge Computing. IEEE Internet of Things Journal, 10 (4). pp. 3079-3093.

Al-Yaseri, A. and Esteban, L. and Yekeen, N. and Giwelli, A. and Sarout, J. and Sarmadivaleh, M. (2023) The effect of clay on initial and residual saturation of hydrogen in clay-rich sandstone formation: Implications for underground hydrogen storage. International Journal of Hydrogen Energy, 48 (13). pp. 5175-5185.

Malik, K. and Ahmad, F. and Yunus, N.A. and Gunister, E. and Ali, S. and Raza, A. (2023) Physical and mechanical properties of kenaf/flax hybrid composites. Journal of Applied Polymer Science, 140 (5).

Hassan, A. and Jumbri, K. and Numin, M.S. and Kee, K.E. and Borhan, N. and Daud, N.M.R.N.M. and Nor, A.M. and Suhor, M.F. (2023) Screening and Benchmarking of Commercial Corrosion Inhibitors for Organic Acids Corrosion Mitigations. Journal of Advanced Research in Applied Mechanics, 102 (1). pp. 10-31.

Abdullah, N.A.F. and Wei, L.J. and Jumbri, K. (2023) Electronic and Topological Properties of UIO66-ILs Interaction through a Computational Study. Journal of Advanced Research in Applied Mechanics, 102 (1). pp. 44-53.

Sikiru, Surajudeen and Soleimani, H. and Shafie, A. and Olayemi, R.I. and Hassan, Y.M. (2023) Prediction of Electromagnetic Properties Using Artificial Neural Networks for Oil Recovery Factors. Colloid Journal, 85 (1). pp. 151-165.

Fathi, A.Y. and El-Khodary, I.A. and Saafan, M. (2023) A Hybrid Model Combining Discrete Wavelet Transform and Nonlinear Autoregressive Neural Network for Stock Price Prediction: An Application in the Egyptian Exchange. Revue d'Intelligence Artificielle, 37 (1). pp. 15-21. ISSN 0992499X

Ghoushchi, S.J. and Ab Rahman, M.N. and Soltanzadeh, M. and Rafique, M.Z. and Hernadewita and Marangalo, F.Y. and Ismail, A.R. (2023) Assessing Sustainable Passenger Transportation Systems to Address Climate Change Based on MCDM Methods in an Uncertain Environment. Sustainability (Switzerland), 15 (4).

Noor Akashah, M.H. and Mohammad Rozali, N.E. and Mahadzir, S. and Liew, P.Y. (2023) Utilization of Cold Energy from LNG Regasification Process: A Review of Current Trends. Processes, 11 (2).

Sultan, N.M. and Albarody, T.M.B. and Obodo, K.O. and Baharom, M.B. (2023) Effect of Mn+2 Doping and Vacancy on the Ferromagnetic Cubic 3C-SiC Structure Using First Principles Calculations. Crystals, 13 (2).

Sattar, M. and Othman, A.R. and Muzamil, M. and Kamaruddin, S. and Akhtar, M. and Khan, R. (2023) Correlation Analysis of Established Creep Failure Models through Computational Modelling for SS-304 Material. Metals, 13 (2).

Al-dhawi, B.N.S. and Kutty, S.R.M. and Hayder, G. and Elnaim, B.M.E. and Mnzool, M. and Noor, A. and Saeed, A.A.H. and Al-Mahbashi, N.M.Y. and Al-Nini, A. and Jagaba, A.H. (2023) Adsorptive Removal of Boron by DIAION� CRB05: Characterization, Kinetics, Isotherm, and Optimization by Response Surface Methodology. Processes, 11 (2).

Mohd Aji, A.Q. and Mohshim, D.F. and Maulianda, B. and El-Raeis, K.A. (2023) Molecular Simulation Study on Methane Adsorption in Amorphous Shale Structure. Minerals, 13 (2).

Al-Yaari, A. and Ching, D.L.C. and Sakidin, H. and Muthuvalu, M.S. and Zafar, M. and Alyousifi, Y. and Saeed, A.A.H. and Haruna, A. (2023) Optimum Volume Fraction and Inlet Temperature of an Ideal Nanoparticle for Enhanced Oil Recovery by Nanofluid Flooding in a Porous Medium. Processes, 11 (2).

Famakin, I.O. and Othman, I. and Kineber, A.F. and Oke, A.E. and Olanrewaju, O.I. and Hamed, M.M. and Olayemi, T.M. (2023) Building Information Modeling Execution Drivers for Sustainable Building Developments. Sustainability (Switzerland), 15 (4).

Garcia, L.V. and Ho, Y.-C. and Myo Thant, M.M. and Han, D.S. and Lim, J.W. (2023) Lithium in a Sustainable Circular Economy: A Comprehensive Review. Processes, 11 (2).

Sharif, Z. and Tang Jung, L. and Ayaz, M. and Yahya, M. and Pitafi, S. (2023) Priority-based task scheduling and resource allocation in edge computing for health monitoring system. Journal of King Saud University - Computer and Information Sciences, 35 (2). pp. 544-559.

Elgharbawy, A.A.M. and Syed Putra, S.S. and Khan, H.W. and Azmi, N.A.N. and Sani, M.S.A. and Ab llah, N. and Hayyan, A. and Jewaratnam, J. and Basirun, W.J. (2023) Menthol and Fatty Acid-Based Hydrophobic Deep Eutectic Solvents as Media for Enzyme Activation. Processes, 11 (2).

Ho, C.-D. and Chang, H. and Chen, Y.-H. and Chew, T.L. and Ke, J.-W. (2023) Investigation on the Performance of CO2 Absorption in Ceramic Hollow-Fiber Gas/Liquid Membrane Contactors. Membranes, 13 (2).

Abdullah, T.A.A. and Zahid, M.S.M. and Ali, W. and Hassan, S.U. (2023) B-LIME: An Improvement of LIME for Interpretable Deep Learning Classification of Cardiac Arrhythmia from ECG Signals. Processes, 11 (2).

Abd Halim, N.S. and Mohd Hizam, S. and Wan Suhaimi, W.M.S. and Ahmad Farid, A.S. and Abd Rahman, P.N.K. and Wirzal, M.D.H. and Sambudi, N.S. and Md Nordin, N.A.H. (2023) Nylon 6,6 Waste Nanofiber Membrane for Produced Water Filtration: Experimental, Performance Modelling, Optimization and Techno-Economic Analysis. Membranes, 13 (2).

Dennis, J.O. and Shukur, M.F. and Aldaghri, O.A. and Ibnaouf, K.H. and Adam, A.A. and Usman, F. and Hassan, Y.M. and Alsadig, A. and Danbature, W.L. and Abdulkadir, B.A. (2023) A Review of Current Trends on Polyvinyl Alcohol (PVA)-Based Solid Polymer Electrolytes. Molecules, 28 (4).

Rahman, M.O. and Nor, N.B.M. and Sawaran Singh, N.S. and Sikiru, S. and Dennis, J.O. and Shukur, M.F.B.A. and Junaid, M. and Abro, G.E.M. and Siddiqui, M.A. and Al-Amin, M. (2023) One-Step Solvothermal Synthesis by Ethylene Glycol to Produce N-rGO for Supercapacitor Applications. Nanomaterials, 13 (4).

Alnadish, A.M. and Singh, N.S.S. and Alawag, A.M. (2023) Applications of Synthetic, Natural, and Waste Fibers in Asphalt Mixtures: A Citation-Based Review. Polymers, 15 (4). ISSN 20734360

Mohamad Yahaya, N.A. and Awang Rambli, D.R. and Sulaiman, S. and Merienne, F. and Alyan, E. (2023) Design of Game-Based Virtual Forests for Psychological Stress Therapy. Forests, 14 (2).

Arefin, A.A. and Rahman, M.S. and Hossain Lipu, M.S. and Sarker, M.R. and Sawaran Singh, N.S. and Meraj, S.T. (2023) Determining Unintentional Island Threshold to Enhance the Reliability in an Electrical Distribution Grid. Mathematics, 11 (4).

Majeed, Z. and Nawazish, S. and Baig, A. and Akhtar, W. and Iqbal, A. and Khan, W.M. and Bukhari, S.M. and Zaidi, A. and Show, P.L. and Mansoor, N. (2023) Effect of varying thickness properties of the slow release fertilizer films on morphology, biodegradability, urea release, soil health, and plant growth. PLoS ONE, 18 (2 Febr).

Salilew, W.M. and Abdul Karim, Z.A. and Lemma, T.A. and Fentaye, A.D. and Kyprianidis, K.G. (2023) Three Shaft Industrial Gas Turbine Transient Performance Analysis. Sensors, 23 (4).

Khursheed, S. and Badruddin, N. and Jeoti, V. and Vukobratovic, D. and Hashmani, M.A. (2023) Low Computational Coding-Efficient Distributed Video Coding: Adding a Decision Mode to Limit Channel Coding Load. Entropy, 25 (2).

Zango, Z.U. and Rozaini, M.N. and Bakar, N.H.H.A. and Zango, M.U. and Haruna, M.A. and Dennis, J.O. and Alsadig, A. and Ibnaouf, K.H. and Aldaghri, O.A. and Wadi, I.A. (2023) Advancements in Clay Materials for Trace Level Determination and Remediation of Phenols from Wastewater: A Review. Separations, 10 (2).

Gil, N. and Quinteros, G. and Blanco, M. and Samsuri, S. and Amran, N.A. and Orellana-Palma, P. and Schwinden, E. and Hernández, E. (2023) Vacuum-Assisted Block Freeze Concentration Studies in Cheese Whey and Its Potential in Lactose Recovery. Foods, 12 (4).

Saafie, N. and Sambudi, N.S. and Wirzal, M.D.H. and Sufian, S. (2023) Effect of Hydrothermal Conditions on Kenaf-Based Carbon Quantum Dots Properties and Photocatalytic Degradation. Separations, 10 (2).

Usman, F. and Ghazali, K.H. and Muda, R. and Dennis, J.O. and Ibnaouf, K.H. and Aldaghri, O.A. and Alsadig, A. and Johari, N.H. and Jose, R. (2023) Detection of Kidney Complications Relevant Concentrations of Ammonia Gas Using Plasmonic Biosensors: A Review. Chemosensors, 11 (2).

Iqbal, M. and Karuppanan, S. and Perumal, V. and Ovinis, M. and Rasul, A. (2023) Rehabilitation Techniques for Offshore Tubular Joints. Journal of Marine Science and Engineering, 11 (2).

Ma, Q. and Rejab, M.R.M. and Azeem, M. and Idris, M.S. and Rani, M.F. and Kumar, A.P. (2023) Axial and radial crushing behaviour of thin-walled carbon fiber-reinforced polymer tubes fabricated by the real-time winding angle measurement system. Forces in Mechanics, 10.

Abdullah, I. and Warviyan, D. and Safrina, R. and Utama, N.A. and Tirta, A. and Veza, I. and Irianto, I. (2023) Green Fiscal Stimulus in Indonesia and Vietnam: A Reality Check of Two Emerging Economies. Sustainability (Switzerland), 15 (3).

Waqar, A. and Qureshi, A.H. and Alaloul, W.S. (2023) Barriers to Building Information Modeling (BIM) Deployment in Small Construction Projects: Malaysian Construction Industry. Sustainability (Switzerland), 15 (3).

Suhaimi, N.H. and Jusoh, N. and Rashidi, S.S. and Ch�ng, C.W.M. and Sambudi, N.S. (2023) Ethylene Recovery via Pebax-Based Composite Membrane: Numerical Optimization. Sustainability (Switzerland), 15 (3).

Rizkiyah, D.N. and Putra, N.R. and Yunus, M.A.C. and Veza, I. and Irianto, I. and Aziz, A.H.A. and Rahayuningsih, S. and Yuniarti, E. and Ikhwani, I. (2023) Insight into Green Extraction for Roselle as a Source of Natural Red Pigments: A Review. Molecules, 28 (3).

Wan Osman, W.N.A. and Badrol, N.A.I. and Samsuri, S. (2023) Biodiesel Purification by Solvent-Aided Crystallization Using 2-Methyltetrahydrofuran. Molecules, 28 (3).

Ahmed, A.A. and Ali, W. and Abdullah, T.A.A. and Malebary, S.J. (2023) Classifying Cardiac Arrhythmia from ECG Signal Using 1D CNN Deep Learning Model. Mathematics, 11 (3).

Hasan, K. and Othman, M.M. and Meraj, S.T. and Rahman, M.S. and Lipu, M.S.H. and Kotsampopoulos, P. (2023) DC-AC Converter with Dynamic Voltage Restoring Ability Based on Self-Regulated Phase Estimator-DQ Algorithm: Practical Modeling and Performance Evaluation. Electronics (Switzerland), 12 (3).

Talpur, N. and Jadid Abdulkadir, S. and Akashah Patah Akhir, E. and Hilmi Hasan, M. and Alhussian, H. and Hafizul Afifi Abdullah, M. (2023) A novel bitwise arithmetic optimization algorithm for the rule base optimization of deep neuro-fuzzy system. Journal of King Saud University - Computer and Information Sciences, 35 (2). pp. 821-842.

Shahid, M.K. and Mainali, B. and Rout, P.R. and Lim, J.W. and Aslam, M. and Al-Rawajfeh, A.E. and Choi, Y. (2023) A Review of Membrane-Based Desalination Systems Powered by Renewable Energy Sources. Water (Switzerland), 15 (3).

Saaid, M.H. and Mahadzir, S. (2023) UTILIZING TRANSIENT MODEL FOR SIMULATING UNCERTAINTY OF NATURAL GAS TRANSPORTATION SYSTEMS. Journal of Engineering Science and Technology, 18 (1). pp. 276-300. ISSN 18234690

Almomani, M. and Balogun, A.O. and Basri, S. and Imam, A.A. and Alazzawi, A.K. and Adeyemo, V.E. and Kumar, G. (2023) EMPIRICAL ANALYSIS OF THRESHOLD VALUES FOR RANK-BASED FILTER FEATURE SELECTION METHODS IN SOFTWARE DEFECT PREDICTION. Journal of Engineering Science and Technology, 18 (1). pp. 187-209. ISSN 18234690

Ahmed, R. and Mahadzir, S. and Mota-Babiloni, A. and Al-Amin, M. and Usmani, A.Y. and Ashraf Rana, Z. and Yassin, H. and Shaik, S. and Hussain, F. (2023) 4E analysis of a two-stage refrigeration system through surrogate models based on response surface methods and hybrid grey wolf optimizer. PLoS ONE, 18 (2 Febr).

Rafindadi, A.D. and Shafiq, N. and Othman, I. and Ibrahim, A. and Aliyu, M.M. and Miki�, M. and Alarifi, H. (2023) Data mining of the essential causes of different types of fatal construction accidents. Heliyon, 9 (2).

Munir, S. and Aziz, A.R.A. and Heikal, M. and Siddiqui, M.I. (2023) Combination of linear stochastic estimation and proper orthogonal decomposition: application in two-phase slug flow. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 45 (2). ISSN 16785878

Al-Shami, T.M. and Jufar, S.R. and Kumar, S. and Abdulelah, H. and Abdullahi, M.B. and Al-Hajri, S. and Negash, B.M. (2023) A comprehensive review of interwell interference in shale reservoirs. Earth-Science Reviews, 237.

Rather, S.-U. and Shariff, A.M. and Sulaimon, A.A. and Bamufleh, H.S. and Qasim, A. and Khan, M.S. and Alhumade, H. and Saeed, U. and Alalayah, W.M. (2023) Corrigendum to �Prediction of carbon-dioxide activity coefficient for solubility in ionic liquids using multi-non-linear regression analysis�, Chemosphere, 311, (2023), 1�10, 137102 (Chemosphere (2023) 311(P2), (S0045653522035950), (10.1016/j.chemosphere.2022.137102)). Chemosphere, 315. ISSN 00456535

Zaib Abbasi, A. and Alqahtani, N. and Tsiotsou, R.H. and Rehman, U. and Hooi Ting, D. (2023) Esports as playful consumption experiences: Examining the antecedents and consequences of game engagement. Telematics and Informatics, 77. ISSN 07365853

Lekkala, M.R. and Mohamed, L. and Jung, J.H. and Jin, C.K. and Li, B. and Jeong, B. and Kim, D.K. (2023) Numerical investigations of flow over wavy cylinders at sub-critical Reynolds number. Ocean Engineering, 269.

Hussain, A. and Muthuvalu, M.S. and Faye, I. and Zafar, M. and Inc, M. and Afzal, F. and Iqbal, M.S. (2023) Numerical investigation of treated brain glioma model using a two-stage successive over-relaxation method. Computers in Biology and Medicine, 153. ISSN 00104825

Tiong, A.C.Y. and Tan, I.S. and Foo, H.C.Y. and Lam, M.K. and Mahmud, H.B. and Lee, K.T. and Show, P.L. (2023) Study on the synergism of cellulose nanocrystals and janus graphene oxide for enhanced oil recovery. Journal of Petroleum Science and Engineering, 221.

Lashari, N. and Ganat, T. and Ayoub, M.A. and Kalam, S. and Ali, I. (2023) Coreflood investigation of HPAM/GO-SiO2 composite through wettability alteration. Journal of Molecular Liquids, 371.

Hamza, M.F. and Soleimani, H. and Ridha, S. and Ahmed, A.A. and Sikiru, S. (2023) Double layer chemical encapsulation of SiO2 nanoparticles for interfacial tension reduction under low salinity condition. Journal of Molecular Liquids, 371.

Foong, S.Y. and Chan, Y.H. and Lock, S.S.M. and Chin, B.L.F. and Yiin, C.L. and Cheah, K.W. and Loy, A.C.M. and Yek, P.N.Y. and Chong, W.W.F. and Lam, S.S. (2023) Microwave processing of oil palm wastes for bioenergy production and circular economy: Recent advancements, challenges, and future prospects. Bioresource Technology, 369.

Abdullahi, M.B. and Jufar, S.R. and Kumar, S. and Al-shami, T.M. and Le, M.D. (2023) Characteristics of SH-wave propagation during oil reservoir excitation using BEM formulation in half-plane model representation. International Journal of Rock Mechanics and Mining Sciences, 162.

Sankoh, A.A. and Laar, C. and Rashid, A. and Frazer-Williams, R. (2023) Coupling multivariate analysis and Bayesian isotope mixing model to assess the origin and quality of groundwater in the Freetown Layered Complex, Sierra Leone. Journal of African Earth Sciences, 198.

Krishna Sahith Sayani, J. and English, N.J. and Khan, M.S. and Ali, A. (2023) A prediction model to predict the thermodynamic conditions of gas hydrates. Chemosphere, 313. ISSN 00456535

Kasim, S.A. and Ismail, M.S. and Ahmed, N. (2023) Grain size statistics and morphometric analysis of Kluang-Niyor, Layang-Layang, and Kampung Durian Chondong Tertiary Sediments, Onshore Peninsular Malaysia: Implications for paleoenvironment and depositional processes. Journal of King Saud University - Science, 35 (2).

Riyadh Atta, M. and Shima Shaharun, M. and Maksudur Rahman Khan, M. and Abdullah, B. and Fadhl Al-Mahmodi, A. and Diyan Mohd Ridzuan, N. and Devi Munusamy, T. and Jun Wei, L. (2023) Enhancing the photo-electrocatalytic properties of g-C3N4 by boron doping and ZIF-8 hybridization. Inorganic Chemistry Communications, 148.

Sari, M.M. and Septiariva, I.Y. and Fauziah, E.N. and Ummatin, K.K. and Arifianti, Q.A.M.O. and Faria, N. and Lim, J.-W. and Suryawan, I.W.K. (2023) Prediction of recovery energy from ultimate analysis of waste generation in Depok City, Indonesia. International Journal of Electrical and Computer Engineering, 13 (1). pp. 1-8.

Yekeen, N. and Salampessy, S.N. and Abu Bakar, A.H. and Ali, M. and Okunade, O.A. and Musa, S.A. and Bavoh, C.B. (2023) Synthesis and pore-scale visualization studies of enhanced oil recovery mechanisms of rice straw silica nanoparticles. Journal of Petroleum Science and Engineering, 221.

Abunowara, M. and Bustam, M.A. and Sufian, S. and Babar, M. and Eldemerdash, U. and Mukhtar, A. and Ullah, S. and Assiri, M.A. and Al-Sehemi, A.G. and Lam, S.S. (2023) High pressure CO2 adsorption onto Malaysian Mukah-Balingian coals: Adsorption isotherms, thermodynamic and kinetic investigations. Environmental Research, 218.

Saafan, M. and Mohyaldinn, M. and Elraies, K. (2023) Obtaining capillary pressure curves from resistivity measurements in low-permeability sandstone. Journal of Petroleum Science and Engineering, 221. ISSN 09204105

Zulqarnain and Yusoff, M.H.M. and Nazir, M.H. and Rahman, M.F.A. and Yaqoob, H. and Rashid, T. and Hai, I.U. and Sher, F. (2023) Hybrid valorization of biodiesel production using sustainable mixed alcohol solvent. Environmental Technology and Innovation, 29.

Ali, M. and Tang Jung, L. and Hassan Sodhro, A. and Ali Laghari, A. and Birahim Belhaouari, S. and Gillani, Z. (2023) A Confidentiality-based data Classification-as-a-Service (C2aaS) for cloud security. Alexandria Engineering Journal, 64. pp. 749-760.

Radzi, M.R.M. and Zulqarnain and Mohd Yusoff, M.H. and Azmi, N. and Anuar, M.R. (2023) Esterification of Glycerol Derived from Biodiesel with Fatty Acids to Monoglycerides � Malaysian Perspective. ChemBioEng Reviews, 10 (1). pp. 22-36.

Wong, K.C. and Goh, P.S. and Suzaimi, N.D. and Ahmad, N.A. and Lim, J.W. and Ismail, A.F. (2023) Copper-catalyzed FeOOH templated method for accelerated fabrication of ultraporous membranes used in microalgae dewatering. Chemical Engineering Journal, 453.

Veza, I. and Irianto and Tuan Hoang, A. and Yusuf, A.A. and Herawan, S.G. and Soudagar, M.E.M. and Samuel, O.D. and Said, M.F.M. and Silitonga, A.S. (2023) Effects of Acetone-Butanol-Ethanol (ABE) addition on HCCI-DI engine performance, combustion and emission. Fuel, 333.