A

Aliyu, A.A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Rao, T.V.V.L.N. and Selvamurugan, N. and Roy, S. (2018) Hydroxyapatite mixed-electro discharge formation of bioceramic Lakargiite (CaZrO3) on Zr�Cu�Ni�Ti�Be for orthopedic application. Materials and Manufacturing Processes, 33 (16). pp. 1734-1744. ISSN 10426914

Ahmad, N.A. and Jumbri, K. and Ramli, A. and Ghani, N.A. and Ahmad, H. and Lim, J.W. (2018) A kinetic approach of DPPH free radical assay of ferulate-based protic ionic liquids (PILs). Molecules, 23 (12). ISSN 14203049

Aminu, N. and Kutty, S.R.M. and Isa, M.H. and Salihi, I.U. (2018) Performance and Kinetics Evaluation of Integrated Suspended Growth Bioreactor Treating Beverage Industry Wastewater. Water Conservation Science and Engineering, 3 (4). pp. 235-252. ISSN 23663340

Aziz, A.R.A. and Hagos, F.Y. and Anbese, Y.T. and Heikal, M.R. and Firmansyah (2018) Application of the chain code and Fourier analysis techniques for the investigation of wrinkles and distortions on early flames. International Journal of Automotive and Mechanical Engineering, 15 (4). pp. 5709-5728. ISSN 22298649

Al-Sabaeei, A. and Napiah, M. and Sutanto, M. and Alaloul, W. (2018) An overview on using the waste denim fiber as a bitumen modifier for sustainable road construction. International Journal of Civil Engineering and Technology, 9 (13). pp. 1194-1200. ISSN 09766308

Abdulelah, H. and Mahmood, S.M. and Al-Hajri, S. and Hakimi, M.H. and Padmanabhan, E. (2018) Retention of hydraulic fracturing water in shale: The influence of anionic surfactant. Energies, 11 (12). ISSN 19961073

Amare, D.F. and Aklilu, T.B. and Gilani, S.I. (2018) Gas path fault diagnostics using a hybrid intelligent method for industrial gas turbine engines. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (12). ISSN 16785878

Amiri, I.S. and Zakaria, R. and Anwar, T. and Bahadoran, M. and Vigneswaran, D. and Yupapin, P. (2018) Dual wavelength optical duobinary modulation using GaAs�AlGaAs microring resonator. Results in Physics, 11. pp. 1087-1093. ISSN 22113797

Adnan, N. and Md Nordin, S. and bin Bahruddin, M.A. and Ali, M. (2018) How trust can drive forward the user acceptance to the technology? In-vehicle technology for autonomous vehicle. Transportation Research Part A: Policy and Practice, 118. pp. 819-836. ISSN 09658564

Azmee, N.M. and Shafiq, N. (2018) Ultra-high performance concrete: From fundamental to applications. Case Studies in Construction Materials, 9. ISSN 22145095

Adam, I.K. and Heikal, M.R. and Aziz, A.R.A. and Othman, A.R. and Yusup, S. (2018) Combustion performance of rubber seed methyl ester using aromatic and phenolic antioxidants in a multi-cylinder diesel engine. Clean Technologies and Environmental Policy, 20 (10). pp. 2239-2253. ISSN 1618954X

Adnan, N. and Nordin, S.M. and Ali, M. (2018) A solution for the sunset industry: Adoption of Green Fertiliser Technology amongst Malaysian paddy farmers. Land Use Policy, 79. pp. 575-584. ISSN 02648377

Aurybi, M.A. and Gilani, S.I. and Al-Kayiem, H.H. and Ismaeel, A.A. (2018) Mathematical evaluation of solar chimney power plant collector, integrated with external heat source for non-interrupted power generation. Sustainable Energy Technologies and Assessments, 30. pp. 59-67. ISSN 22131388

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Asghar, H.M.A. and Bhattacharjee, S. (2018) Quantitative growth evolution of gold nanoparticles synthesized using aqueous Elaeis guineensis (oil palm) leaves extract. Materials Chemistry and Physics, 220. pp. 240-248. ISSN 02540584

Aslam, M. and Ahmad, R. and Yasin, M. and Khan, A.L. and Shahid, M.K. and Hossain, S. and Khan, Z. and Jamil, F. and Rafiq, S. and Bilad, M.R. and Kim, J. and Kumar, G. (2018) Anaerobic membrane bioreactors for biohydrogen production: Recent developments, challenges and perspectives. Bioresource Technology, 269. pp. 452-464. ISSN 09608524

Alnarabiji, M.S. and Yahya, N. and Nadeem, S. and Adil, M. and Baig, M.K. and Ghanem, O.B. and Azizi, K. and Ahmed, S. and Maulianda, B. and Klemeš, J.J. and Elraies, K.A. (2018) Nanofluid enhanced oil recovery using induced ZnO nanocrystals by electromagnetic energy: Viscosity increment. Fuel, 233. pp. 632-643. ISSN 00162361

Ali, A.M. and Padmanabhan, E. and Baioumy, H. (2018) Incorporation of silica into the goethite structure: a microscopic and spectroscopic study. Acta Geochimica, 37 (6). pp. 911-921. ISSN 20960956

Al-Bared, M.A.M. and Ayub, A. and Mohd Yunus, N.Z. and Hamonangan Harahap, I.S. and Marto, A. (2018) Application of demolished concrete material (DCM) in civil engineering structures - A review. International Journal of Civil Engineering and Technology, 9 (11). pp. 2345-2352. ISSN 09766308

Akbarzadeh, O. and Mohd Zabidi, N.A. and Wahab, Y.A. and Hamizi, N.A. and Chowdhury, Z.Z. and Merican, Z.M.A. and Ab Rahman, M. and Akhter, S. and Rasouli, E. and Johan, M.R. (2018) Effect of cobalt catalyst confinement in carbon nanotubes support on Fischer-Tropsch synthesis performance. Symmetry, 10 (11). ISSN 20738994

Athar, M. and Shariff, A.M. and Buang, A. and Hermansyah, H. (2018) Inherently safer mechanical material selection for process equipment. Process Safety and Environmental Protection, 120. pp. 178-186. ISSN 09575820

Andika, R. and Nandiyanto, A.B.D. and Putra, Z.A. and Bilad, M.R. and Kim, Y. and Yun, C.M. and Lee, M. (2018) Co-electrolysis for power-to-methanol applications. Renewable and Sustainable Energy Reviews, 95. pp. 227-241. ISSN 13640321

Azam, F.I. and Rani, A.M.A. and Altaf, K. and Zaharin, H.A. (2018) Experimental and numerical investigation of six-bar linkage application to bellow globe valve for compact design. Applied Sciences (Switzerland), 8 (10). ISSN 20763417

Al-Quraishi, M.S. and Elamvazuthi, I. and Daud, S.A. and Parasuraman, S. and Borboni, A. (2018) Eeg-based control for upper and lower limb exoskeletons and prostheses: A systematic review. Sensors (Switzerland), 18 (10). ISSN 14248220

Azeem, B. and KuShaari, K. and Man, Z. and Irfan, S.A. (2018) Parametric study of tumbling fluidized bed to evaluate nitrogen release characteristics of biopolymer-coated controlled release urea. Chemical Engineering Communications, 205 (10). pp. 1397-1414. ISSN 00986445

Ahmed, A. and Mohd Saaid, I. and M Pilus, R. and Abbas Ahmed, A. and Tunio, A.H. and Baig, M.K. (2018) Development of surface treated nanosilica for wettability alteration and interfacial tension reduction. Journal of Dispersion Science and Technology, 39 (10). pp. 1469-1475. ISSN 01932691

Al-Hajri, S. and Mahmood, S.M. and Abdulelah, H. and Akbari, S. (2018) An overview on polymer retention in Porous media. Energies, 11 (10). ISSN 19961073

Alaloul, W.S. and Loganathan, R. and Mohammed, B.S. and Hasan, E. and Nikbakht and Liew, M.S. and Khed, V. and Adamu, M. (2018) Deformation properties of concrete containing crumb rubber as partial replacement to fine aggregate. International Journal of Civil Engineering and Technology, 9 (10). pp. 317-326. ISSN 09766308

Almomani, M.A. and Basri, S. and Gilal, A.R. (2018) Empirical study of software process improvement in Malaysian small and medium enterprises: The human aspects. Journal of Software: Evolution and Process, 30 (10). ISSN 20477481

Adam, I.K. and Heikal, M. and Aziz, A.R.A. and Yusup, S. (2018) Mitigation of NOx emission using aromatic and phenolic antioxidant-treated biodiesel blends in a multi-cylinder diesel engine. Environmental Science and Pollution Research, 25 (28). pp. 28500-28516. ISSN 09441344

Abbasi, A. and Nasef, M.M. and Faridi-Majidi, R. and Etesami, M. and Takeshi, M. and Abouzari-Lotf, E. (2018) Highly flexible method for fabrication of poly (Glycidyl Methacrylate) grafted polyolefin nanofiber. Radiation Physics and Chemistry, 151. pp. 283-291. ISSN 0969806X

Alebrahim, R. and Sharifishourabi, G. and Sharifi, S. and Alebrahim, M. and Zhang, H. and Yahya, Y. and Ayob, A. (2018) Thermo-mechanical behaviour of smart composite beam under quasi-static loading. Composite Structures, 201. pp. 21-28. ISSN 02638223

Al-Bared, M.A.M. and Marto, A. and Latifi, N. (2018) Utilization of Recycled Tiles and Tyres in Stabilization of Soils and Production of Construction Materials � A State-of-the-Art Review. KSCE Journal of Civil Engineering, 22 (10). pp. 3860-3874. ISSN 12267988

Al-Bared, M.A.M. and Marto, A. and Latifi, N. and Horpibulsuk, S. (2018) Sustainable Improvement of Marine Clay Using Recycled Blended Tiles. Geotechnical and Geological Engineering, 36 (5). pp. 3135-3147. ISSN 09603182

Ahmad, F. and Draz, M.U. and Su, L. and Ozturk, I. and Rauf, A. (2018) Tourism and environmental pollution: Evidence from the One Belt One Road provinces of Western China. Sustainability (Switzerland), 10 (10). ISSN 20711050

Ahmad, M. and Zafar, M. and Sultana, S. and Ahmad, M. and Abbas, Q. and Ayoub, M. and Bahadur, S. and Ullah, F. (2018) Identification of green energy ranunculaceous flora of district Chitral, Northern Pakistan using pollen features through scanning electron microscopy. Microscopy Research and Technique, 81 (9). pp. 1004-1016. ISSN 1059910X

Amiri, I.S. and Anwar, T. and Zakaria, R. and Yupapin, P. (2018) TE-like mode analysis of microsystem InGaAsP/InP semiconductor resonator generating 20�GHz repetition rate pulse trains. Results in Physics, 10. pp. 980-986. ISSN 22113797

Akbari, S. and Mahmood, S.M. and Tan, I.M. and Hematpour, H. (2018) Comparison of neuro-fuzzy network and response surface methodology pertaining to the viscosity of polymer solutions. Journal of Petroleum Exploration and Production Technology, 8 (3). pp. 887-900. ISSN 21900558

Ali, B. and Yusup, S. and Quitain, A.T. and Alnarabiji, M.S. and Kamil, R.N.M. and Kida, T. (2018) Synthesis of novel graphene oxide/bentonite bi-functional heterogeneous catalyst for one-pot esterification and transesterification reactions. Energy Conversion and Management, 171. pp. 1801-1812. ISSN 01968904

Al-hasani, A. and Hakimi, M.H. and Saaid, I.M. and Salim, A.M.A. and Mahat, S.Q.A. and Ahmed, A.A. and Umar, A.A.B. (2018) Reservoir characteristics of the Kuhlan sandstones from Habban oilfield in the Sabatayn Basin, Yemen and their relevance to reservoir rock quality and petroleum accumulation. Journal of African Earth Sciences, 145. pp. 131-147. ISSN 1464343X

Al-Waked, R. and Nasif, M.S. and Mostafa, D.B. (2018) Enhancing the performance of energy recovery ventilators. Energy Conversion and Management, 171. pp. 196-210. ISSN 01968904

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Mellon, N. and Keong, L.K. (2018) Adsorption of pure and predicted binary (CO2:CH4) mixtures on 13X-Zeolite: Equilibrium and kinetic properties at offshore conditions. Microporous and Mesoporous Materials, 267. pp. 221-234. ISSN 13871811

AbdulKareem, F.A. and Mohd. Shariff, A. and Ullah, S. and See, T.L. and Keong, L.K. and Mellon, N. (2018) Adsorption performance of 5A molecular sieve zeolite in water vapor�binary gas environment: Experimental and modeling evaluation. Journal of Industrial and Engineering Chemistry, 64. pp. 173-187. ISSN 1226086X

Ahmad, F. and Draz, M.U. and Yang, S.-C. (2018) Causality nexus of exports, FDI and economic growth of the ASEAN5 economies: evidence from panel data analysis. Journal of International Trade and Economic Development, 27 (6). pp. 685-700. ISSN 09638199

Ahmed, K.Y. and Yahaya, N.Z.B. and Asirvadam, V.S. and Saad, N. and Kannan, R. and Ibrahim, O. (2018) Development of power electronic distribution transformer based on adaptive PI controller. IEEE Access, 6. pp. 44970-44980. ISSN 21693536

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Adamu, M. and Khed, V.C. and Dahim, M.A. and Al-Mattarneh, H. (2018) Mechanical behavior of rubberized interlocking bricks for masonry structural applications. International Journal of Civil Engineering and Technology, 9 (9). pp. 185-193. ISSN 09766308

Al-Sabaeei, A. and Muniandy, R. and Hassim, S. and Napiah, M. (2018) Effect of tire crumb rubber (tcr) on the gyratory compaction of stone mastic asphalt. International Journal of Civil Engineering and Technology, 9 (9). pp. 1138-1150. ISSN 09766308

Anne, J.M. and Boon, Y.H. and Saad, B. and Miskam, M. and Yusoff, M.M. and Shahriman, M.S. and Zain, N.N.M. and Lim, V. and Raoov, M. (2018) b-Cyclodextrin conjugated bifunctional isocyanate linker polymer for enhanced removal of 2,4-dinitrophenol from environmental waters. Royal Society Open Science, 5 (8). ISSN 20545703

Anas, M. and Nasir, M.A. and Asfar, Z. and Nauman, S. and Akalin, M. and Ahmad, F. (2018) Structural health monitoring of GFRP laminates using graphene-based smart strain gauges. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (8). ISSN 16785878

Abdulkadir, B.A. and Ramli, A. and Wei, L.J. and Uemura, Y. (2018) Effect of MgO loading on the production of biodiesel from jatropha oil in the presence of MgO/MCM-22 catalyst. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 97 (7). pp. 191-199. ISSN 09168753

Abdul Aziz, N.H. and Ibrahim, Z. and Ab Aziz, N.A. and Mohamad, M.S. and Watada, J. (2018) Single-solution Simulated Kalman Filter algorithm for global optimisation problems. Sadhana - Academy Proceedings in Engineering Sciences, 43 (7). ISSN 02562499

Abdalsalam M, E. and Yusoff, M.Z. and Mahmoud, D. and Malik, A.S. and Bahloul, M.R. (2018) Discrimination of four class simple limb motor imagery movements for brain�computer interface. Biomedical Signal Processing and Control, 44. pp. 181-190. ISSN 17468094

Adnan, N. and Md Nordin, S. and Hadi Amini, M. and Langove, N. (2018) What make consumer sign up to PHEVs? Predicting Malaysian consumer behavior in adoption of PHEVs. Transportation Research Part A: Policy and Practice, 113. pp. 259-278. ISSN 09658564

Ajab, H. and Dennis, J.O. and Abdullah, M.A. (2018) Synthesis and characterization of cellulose and hydroxyapatite-carbon electrode composite for trace plumbum ions detection and its validation in blood serum. International Journal of Biological Macromolecules, 113. pp. 376-385. ISSN 01418130

Altaf, K. and Qayyum, J.A. and Rani, A.M.A. and Ahmad, F. and Megat-Yusoff, P.S.M. and Baharom, M. and Aziz, A.R.A. and Jahanzaib, M. and German, R.M. (2018) Performance analysis of enhanced 3D printed polymer molds for metal injection molding process. Metals, 8 (6). ISSN 20754701

Ahmad, A. and Lajis, M.A. and Shamsudin, S. and Yusuf, N.K. (2018) Conjectured the behaviour of a recycled metal matrix composite (MMC-AlR) developed through hot press forging by means of 3D FEM simulation. Materials, 11 (6). ISSN 19961944

Albahri, T.A. and Khor, C.S. and Elsholkami, M. and Elkamel, A. (2018) Optimal Design of Petroleum Refinery Configuration Using a Model-Based Mixed-Integer Programming Approach with Practical Approximation. Industrial and Engineering Chemistry Research, 57 (22). pp. 7555-7565. ISSN 08885885

Azman, A.I. and Talib, J.A. and Sokiman, M.S. (2018) Lineament study of the semanggol formation and adjacent areas from landsat 8 image. Bulletin of the Geological Society of Malaysia, 65. pp. 119-124. ISSN 01266187

Amran, N.A. and Samsuri, S. and Jusoh, M. (2018) Effect of freezing time and shaking speed on the performance of progressive Freeze Concentration via Vertical Finned Crystallizer. International Journal of Automotive and Mechanical Engineering, 15 (2). pp. 5356-5366. ISSN 22298649

Al-Mutarreb, A. and Jufar, S.R. and Abdulelah, H. and Padmanabhan, E. (2018) Influence of water immersion on pore system and methane desorption of shales: A case study of batu gajah and kroh shale formations in Malaysia. Energies, 11 (6). ISSN 19961073

Adam, I.K. and Abdul Aziz, A.R. and Heikal, M.R. and Yusup, S. and Firmansyah and Ahmad, A.S. and Zainal Abidin, E.Z. (2018) Performance and emission analysis of rubber seed, palm, and their combined blend in a multi-cylinder diesel engine. Energies, 11 (6). ISSN 19961073

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2018) Physical properties of the rubberized interlocking masonry brick. International Journal of Civil Engineering and Technology, 9 (6). pp. 656-664. ISSN 09766308

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Malik, A.F. and Iqbal, A. (2018) FEM analysis of sezawa mode SAW sensor for VOC based on CMOS compatible AlN/SiO2/Si multilayer structure. Sensors (Switzerland), 18 (6). ISSN 14248220

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. and Saad, N.B. and Ibrahim, R.B. and Dass, S.C. (2018) Optimizing Visual Sensor Coverage Overlaps for Multiview Surveillance Systems. IEEE Sensors Journal, 18 (11). pp. 4544-4552. ISSN 1530437X

Amiri, I.S. and Ariannejad, M.M. and Azzuhri, S.R.B. and Anwar, T. and Kouhdaragh, V. and Yupapin, P. (2018) Vertical Ge photodetector base on InP taper waveguide. Results in Physics, 9. pp. 576-579. ISSN 22113797

Ahmad, F. and Zulkurnain, E.S.B. and Ullah, S. and Amir, N. (2018) Effects of nano-sized boron nitride on thermal decomposition and water resistance behaviour of epoxy-based intumescent coating. Journal of Analytical and Applied Pyrolysis, 132. pp. 171-183. ISSN 01652370

Avila-Torres, P. and Caballero, R. and Litvinchev, I. and Lopez-Irarragorri, F. and Vasant, P. (2018) The urban transport planning with uncertainty in demand and travel time: a comparison of two defuzzification methods. Journal of Ambient Intelligence and Humanized Computing, 9 (3). pp. 843-856. ISSN 18685137

Akilu, S. and Baheta, A.T. and M.Said, M.A. and Minea, A.A. and Sharma, K.V. (2018) Properties of glycerol and ethylene glycol mixture based SiO2-CuO/C hybrid nanofluid for enhanced solar energy transport. Solar Energy Materials and Solar Cells, 179. pp. 118-128. ISSN 09270248

Adamu, M. and Mohammed, B.S. and Shahir Liew, M. (2018) Mechanical properties and performance of high volume fly ash roller compacted concrete containing crumb rubber and nano silica. Construction and Building Materials, 171. pp. 521-538. ISSN 09500618

Aman, M. and Said, A.M. and Kadir, S.J.A. and Ullah, I. (2018) Key concept identification: A comprehensive analysis of frequency and topical graph-based approaches. Information (Switzerland), 9 (5). ISSN 20782489

Atkins, M. and de Haan, A.B. and Abdul Mutalib, M.I.B. and Jacquemin, J. (2018) Editorial special issue Separation and Purification Technology on ILSEPT-3. Separation and Purification Technology, 196. pp. 1-2. ISSN 13835866

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Anwaar Asghar, H.M. and Bhattacharjee, S. (2018) Green synthesis of stabilized spherical shaped gold nanoparticles using novel aqueous Elaeis guineensis (oil palm) leaves extract. Journal of Molecular Structure, 1159. pp. 167-173. ISSN 00222860

Aslam, M. and Rahim, L.B.A. and Watada, J. and Hashmani, M. (2018) Clustering-based cloud migration strategies. Journal of Advanced Computational Intelligence and Intelligent Informatics, 22 (3). pp. 295-305. ISSN 13430130

Adebayo, O.F. and Adegoke, A.K. and Mustapha, K.A. and Adeleye, M.A. and Agbaji, A.O. and Abidin, N.S.Z. (2018) Paleoenvironmental reconstruction and hydrocarbon potentials of Upper Cretaceous sediments in the Anambra Basin, southeastern Nigeria. International Journal of Coal Geology, 192. pp. 56-72. ISSN 01665162

Alabool, H. and Kamil, A. and Arshad, N. and Alarabiat, D. (2018) Cloud service evaluation method-based Multi-Criteria Decision-Making: A systematic literature review. Journal of Systems and Software, 139. pp. 161-188. ISSN 01641212

Azeem, B. and KuShaari, K. and Man, Z. and Trinh, T.H. (2018) Effect of fluidized-bed process variables on controlled-release of nitrogen and coating. Brazilian Journal of Chemical Engineering, 35 (2). pp. 587-603. ISSN 01046632

Al Qudah, A. and Abdul Rahim, M. and Ghazaly, M.Z. and Mashaan, N.S. and Koting, S. and Napiah, M. and Wan Omar, W.M.S. and Issa, Y. (2018) Effect of aged crumb rubber bitumen on performance dense graded mix in Malaysia. International Journal of Civil Engineering and Technology, 9 (4). pp. 1356-1369. ISSN 09766308

Ahmed, S. and Elraies, K.A. and Hashmet, M.R. and Alnarabiji, M.S. (2018) Empirical modeling of the viscosity of supercritical carbon dioxide foam fracturing fluid under different downhole conditions. Energies, 11 (4). ISSN 19961073

Abdalla, E.A.H. and Nallagownden, P. and Nor, N.B.M. and Romlie, M.F. and Hassan, S.M. (2018) An application of a novel technique for assessing the operating performance of existing cooling systems on a university campus. Energies, 11 (4). ISSN 19961073

Alaba, P.A. and Oladoja, N.A. and Sani, Y.M. and Ayodele, O.B. and Mohammed, I.Y. and Olupinla, S.F. and Daud, W.M.W. (2018) Insight into wastewater decontamination using polymeric adsorbents. Journal of Environmental Chemical Engineering, 6 (2). pp. 1651-1672. ISSN 22133437

Ahmad, T. and Bustam, M.A. and Irfan, M. and Moniruzzaman, M. and Asghar, H.M.A. and Bhattacharjee, S. (2018) Effect of volume of gold chloroauric acid on size, shape and stability of biosynthesized AuNPs using aqueous Elaeis guineensis (oil palm) leaves extract. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5135-5145. ISSN 22298649

Athar, M. and Shariff, A.M. and Buang, A. and Zaini, D. (2018) Integrated safety and process optimization approach for ammonia synthesis loop. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5074-5085. ISSN 22298649

Ali, A. and Mohd Nor, N. and Ibrahim, T. and Fakhizan Romlie, M. (2018) Sizing and placement of solar photovoltaic plants by using time-series historical weather data. Journal of Renewable and Sustainable Energy, 10 (2). ISSN 19417012

Aftab, A. and M. Shariff, A. and Garg, S. and Lal, B. and Shaikh, M.S. and Faiqa, N. (2018) Solubility of CO2 in aqueous sodium β-alaninate: Experimental study and modeling using Kent Eisenberg model. Chemical Engineering Research and Design, 131. pp. 385-392. ISSN 02638762

Abdalsalam, E. and Yusoff, M.Z. and Malik, A. and Kamel, N.S. and Mahmoud, D. (2018) Modulation of sensorimotor rhythms for brain-computer interface using motor imagery with online feedback. Signal, Image and Video Processing, 12 (3). pp. 557-564. ISSN 18631703

AL-Qutami, T.A. and Ibrahim, R. and Ismail, I. and Ishak, M.A. (2018) Virtual multiphase flow metering using diverse neural network ensemble and adaptive simulated annealing. Expert Systems with Applications, 93. pp. 72-85. ISSN 09574174

Abdulelah, H. and Mahmood, S.M. and Al-Mutarreb, A. (2018) Effect of Anionic Surfactant on Wettability of Shale and Its Implication on Gas Adsorption/Desorption Behavior. Energy and Fuels, 32 (2). pp. 1423-1432. ISSN 08870624

Adil, M. and Lee, K. and Zaid, H.M. and Latiff, N.R.A. and Alnarabiji, M.S. (2018) Experimental study on electromagnetic-assisted ZnO nanofluid flooding for enhanced oil recovery (EOR). PLoS ONE, 13 (2). ISSN 19326203

Abd Majid, M.A. and Talib, N. (2018) Exhaust steam for biomass drying - Potential efficiency enhancement of palm oil mill cogeneration plant. ARPN Journal of Engineering and Applied Sciences, 13 (4). pp. 1512-1517. ISSN 18196608

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Dreisbach, F. and Keong, L.K. and Mellon, N. and Garg, S. (2018) Experimental measurements and modeling of supercritical CO2 adsorption on 13X and 5A zeolites. Journal of Natural Gas Science and Engineering, 50. pp. 115-127. ISSN 18755100

Ahmad, P. and Khandaker, M.U. and Muhammad, N. and Rehman, F. and Khan, G. and Khan, A.S. and Ullah, Z. and Rehman, M.A. and Ahmed, S. and Gulzar, M. and Din, I.U. and Ahmed, S.M. and Ali, H. and Arshid, N. (2018) Magnesium diboride (MgB2): An effective and novel precursor for the synthesis of vertically aligned BNNTs. Materials Research Bulletin, 98. pp. 235-239. ISSN 00255408

Alshishani, A. and Salhimi, S.M. and Saad, B. (2018) Salting-out assisted liquid-liquid extraction coupled with hydrophilic interaction chromatography for the determination of biguanides in biological and environmental samples. Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences, 1073. pp. 51-59. ISSN 15700232

Al-Kayiem, H.H. and Sreejaya, K.V. and Chikere, A.O. (2018) Experimental and numerical analysis of the influence of inlet configuration on the performance of a roof top solar chimney. Energy and Buildings, 159. pp. 89-98. ISSN 03787788

Alshishani, A.A. and Saad, B. and Semail, N.F. and Mohamad Salhimi, S. and Talib, M.K.M. (2018) Salting-out assisted liquid-liquid extraction method coupled to gas chromatography for the simultaneous determination of thujones and pulegone in beverages. International Journal of Food Properties, 20. S2776-S2785. ISSN 10942912

Ahmad, A. and Bhat, A.H. and Buang, A. (2018) Biosorption of transition metals by freely suspended and Ca-alginate immobilised with Chlorella vulgaris: Kinetic and equilibrium modeling. Journal of Cleaner Production, 171. pp. 1361-1375. ISSN 09596526

Ali, A. and Maqsood, K. and Shin, L.P. and Sellappah, V. and Garg, S. and Shariff, A.B.M. and Ganguly, S. (2018) Synthesis and mixed integer programming based optimization of cryogenic packed bed pipeline network for purification of natural gas. Journal of Cleaner Production, 171. pp. 795-810. ISSN 09596526

Aleem, W. and Mellon, N. (2018) Model for the prediction of separation profile of oil-in-water emulsion. Journal of Dispersion Science and Technology, 39 (1). pp. 8-17. ISSN 01932691

Alansari, A. and Salim, A.M.A. and Rahman, A.H.B.A. and Fello, N.M. and Janjuhah, H.T. (2018) AUGMENTED WIRELINE BASED LITHOLOGY AND FACIES PREDICTION, FOR UPPER ORDOVICIAN SUCCESSION, MURZUQ BASIN, LIBYA. Petroleum and Coal, 60 (5). pp. 994-1007. ISSN 13377027

Abdullahi, A.U. and Ahmad, R. and Nordin Zakaria, M. (2018) Experimental performance analysis of B+-trees with big data indexing potentials. Lecture Notes on Data Engineering and Communications Technologies, 5. pp. 20-29. ISSN 23674512

Altaf, K. and Baharom, M. and Aziz, A.R.A. and Qayyum, J.A. and Jahanzaib, M. (2018) Rapid prototyping of a customized cooling system for a novel crank rocker engine. International Journal of Engineering and Technology(UAE), 7 (3). pp. 90-93. ISSN 2227524X

Akilu, S. and Baheta, A.T. and Sharma, K.V. (2018) Evaluation on thermo-electrical characteristics of Sio2 nanofluids for fuel cell cooling application in automobiles. International Journal of Engineering and Technology(UAE), 7 (3). pp. 137-140. ISSN 2227524X

Arbaiy, N. and Samsudin, N.A. and Mustapa, A. and Watada, J. and Lin, P.-C. (2018) An enhanced possibilistic programming model with fuzzy random confidence-interval for multi-objective problem. Studies in Computational Intelligence, 741. pp. 217-235. ISSN 1860949X

Abdullah, R.N. and Azman, M.N.A. and Kamal, M.F.M. and Riu, T.J. and Yaacob, R.A.I.R. (2018) Experiential learning: The effective application of virtual reality in teaching and learning. Journal of Social Sciences Research, 2018 (Specia). pp. 1208-1212. ISSN 24136670

Alsubal, S. and Sapari, N. and Harahap, I.S.H. (2018) The rise of groundwater due to rainfall and the control of landslide by zero-energy groundwater withdrawal system. International Journal of Engineering and Technology(UAE), 7 (2.29 S). pp. 921-926. ISSN 2227524X

Amir, Z. and Mohd Saaid, I. and Mohamed Jan, B. (2018) An optimization study of polyacrylamide-polyethylenimine-based polymer gel for high temperature reservoir conformance control. International Journal of Polymer Science, 2018. ISSN 16879422

Ahmad, A. and Hashim, U.K.M. and Mohd, O. and Abdullah, M.M. and Sakidin, H. and Rasib, A.W. and Sufahani, S.F. (2018) Comparative analysis of support vector machine, maximum likelihood and neural network classification on multispectral remote sensing data. International Journal of Advanced Computer Science and Applications, 9 (9). pp. 529-537. ISSN 2158107X

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Ghaleb, A.A.S. (2018) An overview on using the chicken manure (CM) waste as a bio-binder for sustainable flexible pavement. International Journal of Engineering Research and Technology, 11 (12). pp. 2023-2033. ISSN 09743154

Ali, S.H. and Poppelreiter, M.C. and Shah, M.M. and Bing, S.B. and Schlaich, M. (2018) Diagenetic understandings based on quantitative data, Miocene carbonate buildup, Offshore Sarawak, Malaysia. Petroleum and Coal, 60 (6). pp. 1275-1282. ISSN 13377027

Ani, Z.C. and Hashim, N.L. and Harun, H. and Basri, S. and Sarlan, A. (2018) Evaluating the quality of UCP-based framework using CK metrics. International Journal of Advanced Computer Science and Applications, 9 (11). pp. 624-631. ISSN 2158107X

Abdul Karim, S.A. and Saaban, A. (2018) Reconstruction of monotone surface using rational bi-cubic spline interpolation. Journal of Engineering and Applied Sciences, 13 (23). pp. 10059-10067. ISSN 1816949X

Azmi, A.S. and Aziz, N.A.C. and Puad, N.I.M. and Halim, A.A. and Yusof, F. and Yusup, S. (2018) Chlorella vulgaris logistic growth kinetics model in high concentrations of aqueous ammonia. IIUM Engineering Journal, 19 (2). pp. 1-9. ISSN 1511788X

Ali, H.M. and Ali, H. and Abubaker, M. and Saieed, A. and Pao, W. and Ahmadlouydarab, M. and Koten, H. and Abid, M. (2018) Condensate retention as a function of condensate flow rate on horizontal enhanced pin-fin tubes. Thermal Science, 2018. pp. 3887-3892. ISSN 03549836

Abbasi, A.Z. and Ting, D.H. and Hlavacs, H. and Fayyaz, M.S. (2018) Modeling consumers� observational learning in digital gaming: A conceptual model. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 11243 . pp. 159-168. ISSN 03029743

Alnarabiji, M.S. and Mohd Zabidi, N.A. and Ramli, A. and Ghanem, O.B. and Abdullah, B. (2018) Controllable green synthesis of supported hollow NiO crystals with shape evolution from octahedral to novel truncated octahedral. CrystEngComm, 20 (42). pp. 6662-6666. ISSN 14668033

Abdulkadir, S.J. and Alhussian, H. and Nazmi, M. and Elsheikh, A.A. (2018) Long short term memory recurrent network for standard and Poor's 500 index modelling. International Journal of Engineering and Technology(UAE), 7 (4). pp. 25-29. ISSN 2227524X

Aman, M. and Md Said, A.B. and Abdul Kadir, S.J. and Ullah, I. (2018) Key concept identification: A sentence parse tree-based technique for candidate feature extraction from unstructured texts. IEEE Access, 6. pp. 60403-60413. ISSN 21693536

Ahmad, A. and Lajis, M.A. and Shamsudin, S. and Yusuf, N.K. (2018) Integrating simulation with experiment for recycled metal matrix composite (MMC-AlR) developed through hot press forging. Key Engineering Materials, 775 KE. pp. 493-498. ISSN 10139826

Ahmad Azahari, I.N.N.B. and Wan Ahmad, W.F. and Hashim, A.S. (2018) Evaluation of video modeling application to teach social interaction skills to autistic children. Communications in Computer and Information Science, 886. pp. 125-135. ISSN 18650929

Alaloul, W.S. and Liew, M.S. and Wan Zawawi, N.A. and Mohammed, B.S. and Adamu, M. (2018) An Artificial neural networks (ANN) model for evaluating construction project performance based on coordination factors. Cogent Engineering, 5 (1). pp. 1-18. ISSN 23311916

Abdul Karim, S.A. (2018) Construction new rational cubic spline with application in shape preservations. Cogent Engineering, 5 (1). pp. 1-19. ISSN 23311916

Abbas, M.K. and Tong, B. (2018) Context-aware based alert system for people with hearing impairments. Journal of Engineering and Applied Sciences, 13 (Specia). pp. 2309-2316. ISSN 1816949X

Arahman, N. and Mukramah and Syawaliah and Maimun, T. and Bilad, M.R. (2018) Fabrication of polyethersulfone membranes using nanocarbon as additive. International Journal of GEOMATE, 15 (50). pp. 51-57. ISSN 21862982

Al-Bared, M.A.M. and Harahap, I.S.H. and Marto, A. (2018) Sustainable strength improvement of soft clay stabilized with two sizes of recycled additive. International Journal of GEOMATE, 15 (51). pp. 39-46. ISSN 21862982

Abdullah, M.A. and Mukhtar, H. and Fong, Y.Y. and Shaharun, M.S. and Mannan, H.A. (2018) Effect of TiO2 incorporation on separation performance of pure PES and PES/PVAc blend membranes. Materials Science Forum, 923 MS. pp. 35-39. ISSN 02555476

Abdullah, M.R.T.L. and Siraj, S. (2018) The evaluation of mLearning implementation model for English Language learning via Fuzzy Delphi method. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 33-54. ISSN 01287702

Ali, M. and Yaacob, R.A.I.R. and Endut, M.N.A.-A. and Sulam, M. (2018) The influence of contents utility on students' use of social media. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 93-110. ISSN 01287702

Akhter, J. and Gilani, S.I. and Ali, M. and Gilani, S.Z.A. (2018) Design and optical modeling of a low-profile stationary concentrating solar collector for medium temperature heat supply. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 65-71. ISSN 21801843

Alansari, A. and Salim, A.M.A. and Janjuhah, H.T. and Fello, N.M. (2018) Enhanced delineation of glacial clastic reservoirs by the application of petroelastic well correlation and seismic inversion: Case study. Petroleum and Coal, 60 (3). pp. 386-401. ISSN 13377027

Abu Bakar, E. and Othman, W.A.F.W. and Othman, A.R. (2018) Systematic approach for uncertainty delta E data for composites panel coating analysis. Lecture Notes in Mechanical Engineering (978981). pp. 131-140. ISSN 21954356

Ayub, T. and Khan, S.U. and Shafiq, N. (2018) Flexural modelling and finite element analysis of frc beams reinforced with PVA and basalt fibres and their validation. Advances in Civil Engineering, 2018. ISSN 16878086

Abdulkadir, S.J. and Alhussian, H. and Alzahrani, A.I. (2018) Analysis of recurrent neural networks for henon simulated time-series forecasting. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-8). pp. 155-159. ISSN 21801843

Al-Hajri, S.A. and Ghayas, S. and Echchabi, A. (2018) Investigating the e-learning acceptance in Oman: Application of structural equation modelling approach. Journal of Computer Science, 14 (3). pp. 368-375. ISSN 15493636

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Skid Resistance of nano silica modified roller compacted rubbercrete for pavement applications: Experimental methods and response surface methodology. Cogent Engineering, 5 (1). ISSN 23311916

Abdalla, I.I. and Ibrahim, T. and Nor, N.M. (2018) Analysis of Tubular Linear Motors for Different Shapes of Magnets. IEEE Access, 6. pp. 10297-10310. ISSN 21693536

Ahmad, F. and Draz, M.U. and Yang, S.-C. (2018) What drives OFDI? Comparative evidence from ASEAN and selected Asian economies. Journal of Chinese Economic and Foreign Trade Studies, 11 (1). pp. 15-31. ISSN 17544416

Adamu, M. and Mohammed, B.S. and Liew, M.S. (2018) Effect of crumb rubber and nano silica on the creep and drying shrinkage of roller compacted concrete pavement. International Journal of GEOMATE, 15 (47). pp. 58-65. ISSN 21862982

Al-Kayiem, H.H. and Mustafa, A.T. and Gilani, S.I.U. (2018) Solar vortex engine: Experimental modelling and evaluation. Renewable Energy, 121. pp. 389-399. ISSN 09601481

Adnan, N. and Md Nordin, S. and Althawadi, O.M. (2018) Barriers towards widespread adoption of V2G technology in smart grid environment: From laboratories to commercialization. Studies in Systems, Decision and Control, 145. pp. 121-134. ISSN 21984182

Ali, A.A. and Dominic, P.D.D. (2018) The influence of technological factors on individual�s intention towards knowledge sharing practice. International Journal of Business Information Systems, 27 (3). pp. 331-348. ISSN 17460972

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Effect of crumb rubber and nano silica on the fatigue performance of roller compacted concrete pavement. Cogent Engineering, 5 (1). ISSN 23311916

Affam, A.C. and Chaudhuri, M. and Kutty, S.R.M. (2018) Comparison of five advanced oxidation processes for degradation of pesticide in aqueous solution. Bulletin of Chemical Reaction Engineering and Catalysis, 13 (1). pp. 179-186. ISSN 19782993

Al-shargie, F. and Tang, T.B. and Badruddin, N. and Kiguchi, M. (2018) Towards multilevel mental stress assessment using SVM with ECOC: an EEG approach. Medical and Biological Engineering and Computing, 56 (1). pp. 125-136. ISSN 01400118

Azizan, M.T. and Mellon, N. and Ramli, R.M. and Yusup, S. (2018) Improving teamwork skills and enhancing deep learning via development of board game using cooperative learning method in Reaction Engineering course. Education for Chemical Engineers, 22. pp. 1-13. ISSN 17497728

Abdul Kareem, F.A. and Shariff, A.M. and Ullah, S. and Keong, L.K. and Mellon, N. (2018) Total and partial uptakes of multicomponent vapor-gas mixtures on 13X zeolite at 343K: Experimental and modeling study. Microporous and Mesoporous Materials, 258. pp. 95-113. ISSN 13871811

Amin, A. and Basri, S. and Hassan, M.F. and Rehman, M. (2018) A snapshot of 26 years of research on creativity in software engineering - A systematic literature review. Lecture Notes in Electrical Engineering, 425. pp. 430-438. ISSN 18761100

Assadi, M.K. and Bakhoda, S. and Saidur, R. and Hanaei, H. (2018) Recent progress in perovskite solar cells. Renewable and Sustainable Energy Reviews, 81. pp. 2812-2822. ISSN 13640321

B

Bavoh, C.B. and Khan, M.S. and Lal, B. and Bt Abdul Ghaniri, N.I. and Sabil, K.M. (2018) New methane hydrate phase boundary data in the presence of aqueous amino acids. Fluid Phase Equilibria, 478. pp. 129-133. ISSN 03783812

Butt, F.I. and Muhammad, N. and Hamid, A. and Moniruzzaman, M. and Sharif, F. (2018) Recent progress in the utilization of biosynthesized polyhydroxyalkanoates for biomedical applications � Review. International Journal of Biological Macromolecules, 120. pp. 1294-1305. ISSN 01418130

Basit, A. and Siwayanan, P. and KuShaari, K. and Keong, L.K. and Azeem, B. (2018) An investigation on dissolutive wetting of porous urea surface. Canadian Journal of Chemical Engineering, 96 (12). pp. 2690-2699. ISSN 00084034

Bhatti, M.S. and Tang, T.B. and Chen, H.C. (2018) Ocular Blood Flow in Rabbits under Deep Anesthesia: A Real-Time Measurement Technique and Its Application in Characterizing Retinal Ischemia. Scientific Reports, 8 (1). ISSN 20452322

Bin Matlan, M.J. and Mohebbi, H. and Pedapati, S.R. and Awang, M.B. and Che Ismail, M. and Kakooei, S. and Dan, N.E. (2018) Dissimilar Friction Stir Welding of Carbon Steel and Stainless Steel: Some Observation on Microstructural Evolution and Stress Corrosion Cracking Performance. Transactions of the Indian Institute of Metals, 71 (10). pp. 2553-2564. ISSN 09722815

Bilad, M.R. and Qing, L. and Fane, A.G. (2018) Non-linear least-square fitting method for characterization of forward osmosis membrane. Journal of Water Process Engineering, 25. pp. 70-80. ISSN 22147144

Bilad, M.R. and Azizo, A.S. and Wirzal, M.D.H. and Jia Jia, L. and Putra, Z.A. and Nordin, N.A.H.M. and Mavukkandy, M.O. and Jasni, M.J.F. and Yusoff, A.R.M. (2018) Tackling membrane fouling in microalgae filtration using nylon 6,6 nanofiber membrane. Journal of Environmental Management, 223. pp. 23-28. ISSN 03014797

Ban, S. and Pao, W. and Nasif, M.S. (2018) Numerical simulation of two-phase flow regime in horizontal pipeline and its validation. International Journal of Numerical Methods for Heat and Fluid Flow, 28 (6). pp. 1279-1314. ISSN 09615539

Basit, A. and Kushaari, K. and Siwayanan, P. and Azeem, B. (2018) Effect of process parameters on droplet spreading behaviour over porous surface. Canadian Journal of Chemical Engineering, 96 (1). pp. 352-359. ISSN 00084034

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Munir, K.S. and Sarfraz, M. (2018) Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion. Ultrasonics Sonochemistry, 45. pp. 133-149. ISSN 13504177

Bala, N. and Napiah, M. and Kamaruddin, I. (2018) Effect of nanosilica particles on polypropylene polymer modified asphalt mixture performance. Case Studies in Construction Materials, 8. pp. 447-454. ISSN 22145095

Babar, M. and Bustam, M.A. and Ali, A. and Maulud, A.S. (2018) Identification and quantification of CO2 solidification in Cryogenic CO2 capture from natural gas. International Journal of Automotive and Mechanical Engineering, 15 (2). pp. 5367-5376. ISSN 22298649

Basri, W.N.F.W. and Lim, J.-W. and Isa, M.H. and Baloo, L. and Uemura, Y. and Bashir, M.J.K. and Lee, Y.-C. and Ching, D.L.C. (2018) Sugarcane bagasse-based adsorbent as an alternative to enhance the harvesting process of Chlorella vulgaris biomass. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 106-113. ISSN 22897879

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Ali, S. and Sarfraz, M. (2018) Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear. International Journal of Minerals, Metallurgy and Materials, 25 (6). pp. 704-715. ISSN 16744799

Budiman Abdurakhman, Y. and Adi Putra, Z. and Bilad, M.R. and Md Nordin, N.A.H. and Wirzal, M.D.H. (2018) Techno-economic analysis of biodiesel production process from waste cooking oil using catalytic membrane reactor and realistic feed composition. Chemical Engineering Research and Design, 134. pp. 564-574. ISSN 02638762

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. (2018) Fractional Order Set-point Weighted PID Controller for pH Neutralization Process Using Accelerated PSO Algorithm. Arabian Journal for Science and Engineering, 43 (6). pp. 2687-2701. ISSN 2193567X

Bashir, Y. and Ghosh, D.P. and Sum, C.W. (2018) Influence of seismic diffraction for high-resolution imaging: applications in offshore Malaysia. Acta Geophysica, 66 (3). pp. 305-316. ISSN 18956572

Beer, M.I. and Hassan, M.F. (2018) Adaptive security architecture for protecting RESTful web services in enterprise computing environment. Service Oriented Computing and Applications, 12 (2). pp. 111-121. ISSN 18632386

Baheta, A.T. and Oumer, A.N. and Hailegiorgis, S.M. (2018) Analysing the thermal performance of heat pipe using copper nanofluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 149-155. ISSN 22897879

Bashiri, R. and Mohamed, N.M. and Suhaimi, N.A. and Shahid, M.U. and Kait, C.F. and Sufian, S. and Khatani, M. and Mumtaz, A. (2018) Photoelectrochemical water splitting with tailored TiO2/SrTiO3@g-C3N4 heterostructure nanorod in photoelectrochemical cell. Diamond and Related Materials, 85. pp. 5-12. ISSN 09259635

Beheshti, M. and Ismail, M.C. and Kakooei, S. and Shahrestani, S. and Mohan, G. and Zabihiazadboni, M. (2018) Influence of deposition temperature on the corrosion resistance of electrodeposited zinc-nickel alloy coatings: Einfluss der Abscheidetemperatur auf die Korrosionsbeständigkeit von galvanisch aufgebrachten Zink-Nickel-Beschichtungen. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 472-482. ISSN 09335137

Balandong, R.P. and Ahmad, R.F. and Mohamad Saad, M.N. and Malik, A.S. (2018) A Review on EEG-Based Automatic Sleepiness Detection Systems for Driver. IEEE Access, 6. pp. 22908-22919. ISSN 21693536

Bong, Y.C. and Oh, P.C. and Chew, T.L. (2018) The effect of amine substituent chain length on POSS/Polysulfone mixed matrix membrane. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3494-3504. ISSN 22894659

Baioumy, H. and Ahmed Salim, A.M. and Arifin, M.H. and Akmal Anuar, M.N. and Musa, A.A. (2018) Geochemical characteristics of the Paleogene-Neogene coals and black shales from Malaysia: Implications for their origin and hydrocarbon potential. Journal of Natural Gas Science and Engineering, 51. pp. 73-88. ISSN 18755100

Bashir, Y. and Ghosh, D.P. and Janjuhah, H.T. and Sum, C.W. (2018) Diffraction enhancement through pre-image processing: Applications to field data, sarawak basin, East Malaysia. Geosciences (Switzerland), 8 (2). ISSN 20763263

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Sarfraz, M. and Haider, S. (2018) An efficient approach to address issues of graphene nanoplatelets (GNPs) incorporation in aluminium powders and their compaction behaviour. Metals, 8 (2). ISSN 20754701

Bala, N. and Napiah, M. and Kamaruddin, I. (2018) Influence of nanosilica on moisture resistance of polymer modified bitumens. Petroleum Science and Technology, 36 (3). pp. 244-250. ISSN 10916466

Bataee, M. and Irawan, S. (2018) Porosity and permeability alteration around wellbore during injection process. International Journal of Geomechanics, 18 (2). ISSN 15323641

Bavoh, C.B. and Nashed, O. and Khan, M.S. and Partoon, B. and Lal, B. and Sharif, A.M. (2018) The impact of amino acids on methane hydrate phase boundary and formation kinetics. Journal of Chemical Thermodynamics, 117. pp. 48-53. ISSN 00219614

Bahari, N.I.S. and Ahmad, A. and Aboobaider, B. and Bin Razali, M.F. and Sakidin, H. and Isa, M.S.M. and Ananta, G.P. and Sari, Y.A. and Sari, N.A. (2018) Remote sensing data restoration to compensate for haze effect. Journal of Theoretical and Applied Information Technology, 96 (1). pp. 118-126. ISSN 19928645

Baig, Z. and Mamat, O. and Mustapha, M. (2018) Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review. Critical Reviews in Solid State and Materials Sciences, 43 (1). pp. 1-46. ISSN 10408436

Babikir, I.A.M. and Salim, A.M.A. and Ghosh, D.P. (2018) STRATIGRAPHIC CHARACTERIZATION OF A FLUVIAL RESERVOIR USING SEISMIC ATTRIBUTES AND SPECTRAL DECOMPOSITION: AN EXAMPLE FROM THE NORTHERN MALAY BASIN. Petroleum and Coal, 60 (5). pp. 943-950. ISSN 13377027

Babasafari, A.A. and Ghosh, D. and Salim, A.M.A. and Alashloo, S.Y.M. (2018) Rock physics modeling assisted reservoir properties prediction: Case study in Malay Basin. International Journal of Engineering and Technology(UAE), 7 (3). pp. 24-28. ISSN 2227524X

Bala, N. and Napiah, M. and Kamaruddin, I. (2018) APPLICATION OF MULTIVARIABLE REGRESSION MODELS FOR PREDICTION OF COMPOSITE NANOSILICA/POLYMER ASPHALT MIXTURE OBC. International Journal of GEOMATE, 14 (45). pp. 202-209. ISSN 21862982

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. and Harindran, V.R. (2018) A comparative study of 2DOF PID and 2DOF fractional order PID controllers on a class of unstable systems. Archives of Control Sciences, 28 (4). pp. 635-682. ISSN 12302384

Balakrishnan, S.R. and Hashim, U. and Sahrim, M. and Ismail, I. and Jamaludin, J. and Ismail, W.Z.W. and Perumal, V. and Haarindraprasad, R. and Mahalingam, S. (2018) Design and fabrication of polydimethylsiloxane based low cost microfluidic for ultra-fast diagnostic applications. International Journal of Integrated Engineering, 10 (4). pp. 109-113. ISSN 2229838X

Bala, A. and Ismail, I. and Ibrahim, R. and Sait, S.M. (2018) Applications of Metaheuristics in Reservoir Computing Techniques: A Review. IEEE Access, 6. pp. 58012-58029. ISSN 21693536

Borhan, A. and Yit, T.Y. and Yusup, S. and Yunus, N.M. (2018) Monoethanolamine wastewater treatment via adsorption using wood sawdust based activated carbon Rawatan air sisa monoetanolamina melalui kaedah penjerapan menggunakan karbon habuk kayu yang diaktifkan. Malaysian Journal of Analytical Sciences, 22 (3). pp. 532-541. ISSN 13942506

Bala, N. and Kamaruddin, I. and Napiah, M. and Danlami, N. (2018) Polyethylene polymer modified bitumen: Process optimization and modeling of linear viscoelastic rheological properties using response surface methodology. Journal of Engineering and Applied Sciences, 13 (9). pp. 2818-2827. ISSN 1816949X

C

Chan, Y.H. and Tan, R.R. and Yusup, S. and Quitain, A.T. and Loh, S.K. and Uemura, Y. (2018) Life Cycle Assessment (LCA) of Production and Fractionation of Bio-Oil Derived from Palm Kernel Shell: a Gate-to-Gate Case Study. Process Integration and Optimization for Sustainability, 2 (4). pp. 343-351. ISSN 25094238

Chan, Y.H. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Liquefaction of palm kernel shell in sub- and supercritical water for bio-oil production. Journal of the Energy Institute, 91 (5). pp. 721-732. ISSN 17439671

Chan, Y.H. and Yusup, S. and Quitain, A.T. and Chai, Y.H. and Uemura, Y. and Loh, S.K. (2018) Extraction of palm kernel shell derived pyrolysis oil by supercritical carbon dioxide: Evaluation and modeling of phenol solubility. Biomass and Bioenergy, 116. pp. 106-112. ISSN 09619534

Chen, X. and Thornton, S.F. and Pao, W. (2018) Mathematical model of coupled dual chemical osmosis based on mixture-coupling theory. International Journal of Engineering Science, 129. pp. 145-155. ISSN 00207225

Chew, T.L. and Choy, C.K. and Yeong, Y.F. and Lim, J.W. and Ahmad, A.L. and Ho, C.D. (2018) Mesoporous materials synthesized by novel reflux synthesis method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 47 (1). pp. 151-158. ISSN 22897879

Chowdhury, M.R. and Moshikur, R.M. and Wakabayashi, R. and Tahara, Y. and Kamiya, N. and Moniruzzaman, M. and Goto, M. (2018) Ionic-Liquid-Based Paclitaxel Preparation: A New Potential Formulation for Cancer Treatment. Molecular Pharmaceutics, 15 (6). pp. 2484-2488. ISSN 15438384

Chee, O.P. and Poppelreiter, M. and Ghosh, D. and Lazar, R. and Djuraev, U. (2018) Study of a TX field miocene carbonate build-up: Integration of sedimentological data with modern carbonate analogue and 3D seismic characterization to establish carbonate facies modelling workflow. Bulletin of the Geological Society of Malaysia, 65. pp. 135-140. ISSN 01266187

Cruz-Mejia, O. and Marmolejo, J.A. and Vasant, P. (2018) Lead time performance in a internet product delivery supply chain with automatic consolidation. Journal of Ambient Intelligence and Humanized Computing, 9 (3). pp. 867-874. ISSN 18685137

Choudhury, B. and Chatterjee, P.K. and Habib, K. and Saha, B.B. (2018) Performance Investigation of a Solar Heat Driven Adsorption Chiller under Two Different Climatic Conditions. Journal of The Institution of Engineers (India): Series C, 99 (3). pp. 347-354. ISSN 22500545

Cheab, S. and Wong, P.W. and Soeung, S. (2018) Design of multi-band filters using parallel connected topology. Radioengineering, 27 (1). pp. 186-192. ISSN 12102512

Chan, Y.H. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Optimization of hydrothermal liquefaction of palm kernel shell and consideration of supercritical carbon dioxide mediation effect. Journal of Supercritical Fluids, 133. pp. 640-646. ISSN 08968446

Che Ani, M.N. and Kamaruddin, S. and Azid, I.A. (2018) The model development of an effective triggering system of production Kanban size towards just-in-time (JIT) production. Advances in Science, Technology and Engineering Systems, 3 (5). pp. 298-306. ISSN 24156698

Chala, G.T. and Aziz, A.R.A. and Hagos, F.Y. (2018) Natural Gas Engine Technologies: Challenges and Energy Sustainability Issue. Energies, 11 (11). ISSN 19961073

Cheah, J.-H. and Memon, M.A. and Chuah, F. and Ting, H. and Ramayah, T. (2018) Assessing reflective models in marketing research: A comparison between pls and plsc estimates. International Journal of Business and Society, 19 (1). pp. 139-160. ISSN 15116670

Chin, J.F. and Prakash, J. and Kamaruddin, S. and Tan, M.C.L. (2018) Automating computer simulation and statistical analysis in production planning and control research. International Journal of Computers and Applications, 40 (1). pp. 25-41. ISSN 1206212X

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. (2018) Flow start-up and transportation of waxy crude oil in pipelines-A review. Journal of Non-Newtonian Fluid Mechanics, 251. pp. 69-87. ISSN 03770257

Chern-Tong, H. and Aziz, I.A. (2018) A Performance Evaluation of Chi-Square Pruning Techniques in Class Association Rules Optimization. Advances in Intelligent Systems and Computing, 662. pp. 195-203. ISSN 21945357

Chong, W.K. and Drieberg, M. and Jeoti, V. (2018) Mitigating false blocking problem in wireless ad hoc networks. Telecommunication Systems, 67 (1). pp. 31-46. ISSN 10184864

D

Djuraev, U. and Jufar, S.R. and Mahardika, H. and Ooi, P.C. (2018) Numerical simulation of seismoelectric effect for monitoring foam propagation through a reservoir. Journal of Petroleum Science and Engineering, 171. pp. 618-635. ISSN 09204105

Dong, Y. and Shah, S.N. and Pranesh, M. and Prokkola, H. and Kärkkäinen, J. and Leveque, J.-M. and Lassi, U. and Lethesh, K.C. (2018) Azepanium based protic ionic liquids: Synthesis, thermophysical properties and COSMO-RS study. Journal of Molecular Liquids, 264. pp. 24-31. ISSN 01677322

Ding, S.H. and Chew, T.L. and Oh, P.C. and Ahmad, A.L. and Jawad, Z.A. (2018) Preparation of mixed matrix membrane using cellulose acetate incorporated with synthesized KIT-6 silica. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3505-3514. ISSN 22894659

Din, I.U. and Shaharun, M.S. and Naeem, A. and Tasleem, S. and Rafie Johan, M. (2018) Carbon nanofibers based copper/zirconia catalysts for carbon dioxide hydrogenation to methanol: Effect of copper concentration. Chemical Engineering Journal, 334. pp. 619-629. ISSN 13858947

Dominic, P.D.D. and Jaafar, J.B. and Arshad, N.I. (2018) Editorial. International Journal of Business Information Systems, 29 (1). pp. 1-3. ISSN 17460972

Danyaro, K.U. and Liew, M.S. (2018) A proposed methodology for integrating oil and gas data using semantic big data technology. Lecture Notes on Data Engineering and Communications Technologies, 5. pp. 30-38. ISSN 23674512

Danlami, N. and Napiah, M.B. and Sadullah, A.F.M. and Bala, N. (2018) A simple appraisal of available visibility variation on two-lane rural roads. Journal of Engineering and Applied Sciences, 13 (19). pp. 7966-7974. ISSN 1816949X

Daneshpajouh, H. and Delisle, P. and Boisson, J.-C. and Krajecki, M. and Zakaria, N. (2018) Parallel batch self-organizing map on graphics processing unit using CUDA. Communications in Computer and Information Science, 796. pp. 87-100. ISSN 18650929

E

Eliseus, A. and Bilad, M.R. and Nordin, N.A.H.M. and Khan, A.L. and Putra, Z.A. and Wirzal, M.D.H. and Aslam, M. and Aqsha, A. and Jaafar, J. (2018) Two-way switch: Maximizing productivity of tilted panel in membrane bioreactor. Journal of Environmental Management, 228. pp. 529-537. ISSN 03014797

Elgharbawy, A.A. and Alam, M.Z. and Moniruzzaman, M. and Kabbashi, N.A. and Jamal, P. (2018) Factors affecting the in-situ hydrolysis of empty fruit bunches in ionic liquid compatible cellulase system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 52 (1). pp. 23-32. ISSN 22897879

El-Adawy, M. and Heikal, M.R. and Rashid, A. and Aziz, A. and Adam, I.K. and Ismael, M.A. and Babiker, M.E. and Baharom, M.B. and Firmansyah and Abidin, E.Z.Z. (2018) On the application of proper orthogonal decomposition (POD) for in-cylinder flow analysis. Energies, 11 (9). ISSN 19961073

Eliseus, A. and Putra, Z.A. and Bilad, M.R. and Nordin, N.A.H.M. and Wirzal, M.D.H. and Jaafar, J. and Khan, A.L. and Aqsha (2018) Energy minimization of a tilted panel filtration system for microalgae filtration: Performance modeling and optimization. Algal Research, 34. pp. 104-115. ISSN 22119264

Eng, J. and Karuppanan, S. and Patil, S. (2018) Frictional stress analysis of spur gear with misalignments. Journal of Mechanical Engineering and Sciences, 12 (2). pp. 3566-3580. ISSN 22894659

Elaina, N.S. and Malik, A.S. and Shams, W.K. and Badruddin, N. and Abdullah, J.M. and Reza, M.F. (2018) Localized N20 Component of Somatosensory Evoked Magnetic Fields in Frontoparietal Brain Tumor Patients Using Noise-Normalized Approaches. Clinical Neuroradiology, 28 (2). pp. 267-281. ISSN 18691439

Elgharbawy, A.A. and Alam, M.Z. and Moniruzzaman, M. and Kabbashi, N.A. and Jamal, P. (2018) Chemical and structural changes of pretreated empty fruit bunch (EFB) in ionic liquid-cellulase compatible system for fermentability to bioethanol. 3 Biotech, 8 (5). ISSN 2190572X

Elgharbawy, A.A. and Riyadi, F.A. and Alam, M.Z. and Moniruzzaman, M. (2018) Ionic liquids as a potential solvent for lipase-catalysed reactions: A review. Journal of Molecular Liquids, 251. pp. 150-166. ISSN 01677322

Etesami, M. and Abouzari-Lotf, E. and Ripin, A. and Mahmoud Nasef, M. and Ting, T.M. and Saharkhiz, A. and Ahmad, A. (2018) Phosphonated graphene oxide with high electrocatalytic performance for vanadium redox flow battery. International Journal of Hydrogen Energy, 43 (1). pp. 189-197. ISSN 03603199

El-Adawy, M. and Heikal, M.R. and Aziz, A.R.A. and Siddiqui, M.I. and Wahhab, H.A.A. and Ismael, M.A. (2018) Tumble Motion Evolution for GDI Engine Using Particle Image Velocimetry (PIV). Journal of Mechanical Engineering, Specia (1). pp. 191-201. ISSN 18235514

Ean, L.W. and Malek, M.A. and Mohammed, B.S. and Tang, C.-W. and Bong, P.X.H. (2018) A review on characterization of sediments for Green bricks production. International Journal of Engineering and Technology(UAE), 7 (4). pp. 41-47. ISSN 2227524X

Ee, L.K. and Aziz, I.A. (2018) A hybrid prediction model for pipeline corrosion using Artificial Neural Network with Particle Swarm Optimization. Journal of Engineering and Applied Sciences, 13 (Specia). pp. 3131-3138. ISSN 1816949X

Endut, M.N.A.-A. and Abdullah, M.R.T.L. and Yaacob, R.A.I.R. (2018) Reformulation of critical thinking in the Malaysian tertiary engineering education: An Islamic approach. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 121-136. ISSN 01287702

El Adawy, M. and Heikal, M.R. and Aziz, A.R.A. and Munir, S. and Siddiqui, M.I. (2018) Effect of boost pressure on the in-cylinder tumble- motion of GDI engine under steady-state conditions using Stereoscopic-PIV. Journal of Applied Fluid Mechanics, 11 (3). pp. 733-742. ISSN 17353572

Embong, A.M. and Yaacob, R.A.I.R. and Sabian, N.A.A. and Noor, A.B.M. and Mohamad, R. and Lahmuddin, A.H. (2018) Revealing the non-Muslim Kopitiams and the awarded Halal Signage. Journal of Engineering and Applied Sciences, 13 (1). pp. 248-253. ISSN 1816949X

F

Farooq, J. and Mushtaq, M. and Munir, S. and Ramzan, M. and Chung, J.D. and Farooq, U. (2018) Slip flow through a non-uniform channel under the influence of transverse magnetic field. Scientific Reports, 8 (1). ISSN 20452322

Fentaye, A.D. and Baheta, A.T. and Gilani, S.I.U.-H. (2018) Gas turbine gas-path fault identification using nested artificial neural networks. Aircraft Engineering and Aerospace Technology, 90 (6). pp. 992-999. ISSN 17488842

Fernandes, C.S. and Nordin, N.A.H.M. and Bilad, M.R. and Aqsha, A. and Wirzal, M.D.H. and Putra, Z.A. (2018) Phase inversion and pore formation of PVDF membrane with silica as additive. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 49 (1). pp. 48-54. ISSN 22897879

Filho, W.L. and Balogun, A.-L. and Ayal, D.Y. and Bethurem, E.M. and Murambadoro, M. and Mambo, J. and Taddese, H. and Tefera, G.W. and Nagy, G.J. and Fudjumdjum, H. and Mugabe, P. (2018) Strengthening climate change adaptation capacity in Africa- case studies from six major African cities and policy implications. Environmental Science and Policy, 86. pp. 29-37. ISSN 14629011

Fazli, H. and Yassin, A.Y.M. and Shafiq, N. and Teo, W. (2018) Pull-off testing as an interfacial bond strength assessment of CFRP-concrete interface exposed to a marine environment. International Journal of Adhesion and Adhesives, 84. pp. 335-342. ISSN 01437496

Foroozesh, J. and Jamiolahmady, M. (2018) The physics of CO2 transfer during carbonated water injection into oil reservoirs: From non-equilibrium core-scale physics to field-scale implication. Journal of Petroleum Science and Engineering, 166. pp. 798-805. ISSN 09204105

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Ovinis, M. (2018) Experimental Study of Low Velocity Impact Response of Carbon/Basalt Hybrid Filament Wound Composite Pipes. International Journal of Structural Stability and Dynamics, 18 (7). ISSN 02194554

Fazli, H. and Mohd Yassin, A.Y. and Shafiq, N. and Teo, W. (2018) Effective bond length of CFRP sheets externally bonded to concrete beams under marine environment. Construction and Building Materials, 167. pp. 726-738. ISSN 09500618

Farooq, M. and Ramli, A. and Naeem, A. and Mahmood, T. and Ahmad, S. and Humayun, M. and Islam, M.G.U. (2018) Biodiesel production from date seed oil (Phoenix dactylifera L.) via egg shell derived heterogeneous catalyst. Chemical Engineering Research and Design, 132. pp. 644-651. ISSN 02638762

Fosu-Duah, E. and Padmanabhan, E. and Vintane, J.A.G. (2018) VARIATIONS IN SURFACE POTENTIAL CHARACTERISTICS OF SELECTED SHALES FROM CENTRAL LUCONIA, OFFSHORE SARAWAK- MALAYSIA. Petroleum and Coal, 60 (2). pp. 244-254. ISSN 13377027

Farag, H. and Embaby, A.-A. and Kishida, M. and El-Hendawy, A.-N.A. and Nasef, M.M. (2018) Highly Active Low Cobalt Content-Based Bulk MoS2 Hydrodesulfurization Catalysts with a Unique Impact of H2S. Journal of Chemistry, 2018. ISSN 20909063

Faez, K.M. and Hamdavi, S. and Rao, T.V.V.L.N. and Ya, H.H. and Mohamed, N.M. (2018) Performance analysis of grooved hydrodynamic journal bearing with multi- depth textured surface. International Journal of Vehicle Structures and Systems, 10 (2). pp. 142-145. ISSN 09753060

Fayaz, F. and Nga, N.T.A. and Pham, T.L.M. and Danh, H.T. and Abdullah, B. and Setiabudi, H.D. and Vo, D.-V.N. (2018) Hydrogen production from ethanol dry reforming over lanthania-promoted Co/Al2O3 catalyst. IIUM Engineering Journal, 19 (1). pp. 24-33. ISSN 1511788X

Fong, L.K. and Bhattacharyya, E. and Md Nordin, S. (2018) Communication in real-time: ESL students' perception of "Time Out" role play. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 73-92. ISSN 01287702

G

Genisa, M. and Shuib, S. and Rajion, Z.A. and Arief, E.M. and Hermana, M. (2018) Density estimation based on the Hounsfield unit value of cone beam computed tomography imaging of the jawbone system. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 232 (12). pp. 1168-1175. ISSN 09544119

Goyal, S. and Shaharun, M.S. and Kait, C.F. and Abdullah, B. and Ameen, M. (2018) Photoreduction of carbon dioxide to methanol over copper based zeolitic imidazolate framework-8: A new generation photocatalyst. Catalysts, 8 (12). ISSN 20734344

Ganat, T.A. and Hrairi, M. (2018) A new choke correlation to predict flow rate of artificially flowing wells. Journal of Petroleum Science and Engineering, 171. pp. 1378-1389. ISSN 09204105

Gerami, A. (2018) 3D electrical resistivity forward modeling using the Kirchhoff's method for solving an equivalent resistor network. Journal of Applied Geophysics, 159. pp. 135-145. ISSN 09269851

Gopinath, S.C.B. and Anbu, P. and Theivasanthi, T. and Arshad, M.K.M. and Lakshmipriya, T. and Voon, C.H. and Pandian, K. and Velusamy, P. and Chinni, S.V. (2018) Characterization of reduced graphene oxide obtained from vacuum-assisted low-temperature exfoliated graphite. Microsystem Technologies, 24 (12). pp. 5007-5016. ISSN 09467076

Ganat, T.A. and Hrairi, M. (2018) Gas-liquid two-phase upward flow through a vertical pipe: Influence of pressure drop on the measurement of fluid flow rate. Energies, 11 (11). ISSN 19961073

Gillani, Q.F. and Ahmad, F. and Mutalib, M.I.A. and Megat-Yusoff, P.S.M. and Ullah, S. (2018) Effects of Halloysite Nanotube Reinforcement in Expandable Graphite Based Intumescent Fire Retardant Coatings Developed Using Hybrid Epoxy Binder System. Chinese Journal of Polymer Science (English Edition), 36 (11). pp. 1286-1296. ISSN 02567679

Gbadamosi, A.O. and Junin, R. and Manan, M.A. and Yekeen, N. and Agi, A. and Oseh, J.O. (2018) Recent advances and prospects in polymeric nanofluids application for enhanced oil recovery. Journal of Industrial and Engineering Chemistry, 66. pp. 1-19. ISSN 1226086X

Gillani, Q.F. and Ahmad, F. and Abdul Mutalib, M.I. and Megat-Yusoff, P.S.M. and Ullah, S. and Messet, P.J. and Zia-ul-Mustafa, M. (2018) Thermal degradation and pyrolysis analysis of zinc borate reinforced intumescent fire retardant coatings. Progress in Organic Coatings, 123. pp. 82-98. ISSN 03009440

Gan, D.K.W. and Loy, A.C.M. and Chin, B.L.F. and Yusup, S. and Unrean, P. and Rianawati, E. and Acda, M.N. (2018) Kinetics and thermodynamic analysis in one-pot pyrolysis of rice hull using renewable calcium oxide based catalysts. Bioresource Technology, 265. pp. 180-190. ISSN 09608524

Gámez Vintaned, J.A. and Liñán, E. and Navarro, D. and Zhuravlev, A.Y. (2018) The oldest Cambrian skeletal fossils of Spain (Cadenas Ibéricas, Aragón). Geological Magazine, 155 (7). pp. 1465-1474. ISSN 00167568

Ghaleb, A.A.G. and Kutty, S.R.M. and Ching, C.Y. and Al-Fakih, A. (2018) Degradation of ammonia in an integrated anoxic-aerobic clarifier system. International Journal of Civil Engineering and Technology, 9 (9). pp. 1060-1070. ISSN 09766308

Ghoushji, M.J. and Alebrahim, R. and Zulkifli, R. and Sulong, A.B. and Abdullah, S. and Azhari, C.H. (2018) Crashworthiness characteristics of natural ramie/bio-epoxy composite tubes for energy absorption application. Iranian Polymer Journal (English Edition), 27 (8). pp. 563-575. ISSN 10261265

Gozalo, R. and Dies �lvarez, M.E. and Gámez Vintaned, J.A. and Chirivella, J.B. and Liñán, E. (2018) Presence of naraoia walcott, 1912 (Nektaspida, arthropoda) in the middle cambrian of europe (Murero, NE Spain) presencia de naraoia walcott, 1912 (Nektaspida, arthropoda) en el cámbrico medio de europa (murero, ne de España). Spanish Journal of Palaeontology, 33 (1). pp. 83-88. ISSN 22550550

Gohari, A. and Matori, A.N. and Yusof, K.W. and Toloue, I. and Myint, K.C. and Sholagberu, A.T. (2018) Route selection and trade-offs evaluation of the intermodal freight transportation. Journal of Engineering Science and Technology, 13 (6). pp. 1451-1466. ISSN 18234690

Gonfa, G. and Muhammad, N. and Azmi Bustam, M. (2018) Probing the interactions between DNA nucleotides and biocompatible liquids: COSMO-RS and molecular simulation study. Separation and Purification Technology, 196. pp. 237-243. ISSN 13835866

Gillani, Q.F. and Ahmad, F. and Melor, P.S. and Mutlib, M.I.A. and Ullah, S. (2018) A synergy study of zinc borate in halloysite nanotube reinforced, siloxane epoxy base intumescent fire resistive coatings: Eine Synergieuntersuchung zu Zinkborat in, mit Halloysit-Nanoröhren verstärkten, Siloxane Epoxy basierten, intumeszenten feuerfesten Beschichtungen. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 420-426. ISSN 09335137

Ghazali, Z. and Zahid, M. (2018) The Awareness and Impact of Carbon Capture and Storage (CCS) on Climate Change in Malaysia. International Journal of Social Ecology and Sustainable Development, 9 (2). pp. 13-27. ISSN 19478402

Ghanem, O.B. and Shah, S.N. and Lévêque, J.-M. and Mutalib, M.I.A. and El-Harbawi, M. and Khan, A.S. and Alnarabiji, M.S. and Al-Absi, H.R.H. and Ullah, Z. (2018) Study of the antimicrobial activity of cyclic cation-based ionic liquids via experimental and group contribution QSAR model. Chemosphere, 195. pp. 21-28. ISSN 00456535

Ghaedi, H. and Ayoub, M. and Sufian, S. and Shariff, A.M. and Lal, B. and Wilfred, C.D. (2018) Density and refractive index measurements of transition-temperature mixture (deep eutectic analogues) based on potassium carbonate with dual hydrogen bond donors for CO2 capture. Journal of Chemical Thermodynamics, 118. pp. 147-158. ISSN 00219614

Gardezi, S.J.S. and Faye, I. and Sanchez Bornot, J.M. and Kamel, N. and Hussain, M. (2018) Mammogram classification using dynamic time warping. Multimedia Tools and Applications, 77 (3). pp. 3941-3962. ISSN 13807501

Gámez Vintaned, J.A. and Zhuravlev, A.Y. (2018) Comment on �Aysheaia prolata from the Utah Wheeler Formation (Drumian, Cambrian) is a frontal appendage of the radiodontan Stanleycaris� by Stephen Pates, Allison C. Daley, and Javier Ortega-Hernández. Acta Palaeontologica Polonica, 63 (1). pp. 103-104. ISSN 05677920

Gohari, A. and Matori, A.N. and Yusof, K.W. and Toloue, I. and Sholagberu, A.T. (2018) The effect of fuel price increase on transport cost of container transport vehicles. International Journal of GEOMATE, 15 (50). pp. 174-181. ISSN 21862982

Goscinski, A.M. and Tari, Z. and Aziz, I.A. and Alzahrani, E.J. (2018) Fog computing as a critical link between a central cloud and iot in support of fast discovery of new hydrocarbon reservoirs. Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST, 235. pp. 247-261. ISSN 18678211

Gubartallah, E.A. and Makahleh, A. and Quirino, J.P. and Saad, B. (2018) Determination of biogenic amines in seawater using capillary electrophoresis with capacitively coupled contactless conductivity detection. Molecules, 23 (5). ISSN 14203049

Guan, B.H. and Bin Zahari, M.H. and Lee, K.C. (2018) Effect of La3+ substitution on the structural and magnetic properties of Mn-Zn ferrite prepared by sol-gel auto-combustion method. Materials Science Forum, 916 MS. pp. 91-95. ISSN 02555476

Gohari, A. and Nasir Matori, A. and Yusof, K.W. and Toloue, I. and Myint, K.C. and Sholagberu, A.T. (2018) Route/Modal choice analysis and tradeoffs evaluation of the intermodal transport network of Peninsular Malaysia. Cogent Engineering, 5 (1). ISSN 23311916

Gilal, A.R. and Jaafar, J. and Capretz, L.F. and Omar, M. and Basri, S. and Aziz, I.A. (2018) Finding an effective classification technique to develop a software team composition model. Journal of Software: Evolution and Process, 30 (1). ISSN 20477481

Ghaedi, H. and Ayoub, M. and Sufian, S. and Hailegiorgis, S.M. and Murshid, G. and Khan, S.N. (2018) Thermal stability analysis, experimental conductivity and pH of phosphonium-based deep eutectic solvents and their prediction by a new empirical equation. Journal of Chemical Thermodynamics, 116. pp. 50-60. ISSN 00219614

H

Hamdan, N.H. and Jamalud, S.N.F. (2018) Reservoir characteristics of carbonates build-ups in southern central Luconia province: A study based on different scales. Bulletin of the Geological Society of Malaysia, 66. pp. 99-105. ISSN 01266187

Ho, C.-D. and Chen, L. and Cheng, C.-H. and Hsu, T.-H. and Lim, J.-W. (2018) Permeate flux enhancement with roughened-surface flow channel in air-gmembrane distillation systems. Desalination and Water Treatment, 136. pp. 39-48. ISSN 19443994

Hosseini, S. and Lao-atiman, W. and Han, S.J. and Arpornwichanop, A. and Yonezawa, T. and Kheawhom, S. (2018) Discharge Performance of Zinc-Air Flow Batteries Under the Effects of Sodium Dodecyl Sulfate and Pluronic F-127. Scientific Reports, 8 (1). ISSN 20452322

Hosseini, S. and Han, S.J. and Arponwichanop, A. and Yonezawa, T. and Kheawhom, S. (2018) Ethanol as an electrolyte additive for alkaline zinc-air flow batteries. Scientific Reports, 8 (1). ISSN 20452322

Hermansyah, H. and Hidayat, M.E.N. and Kumaraningrum, A.R. and Yohda, M. and Shariff, A.B.M. (2018) Assessment, mitigation, and control of potential gas leakage in existing buildings not designed for gas installation in Indonesia. Energies, 11 (11). ISSN 19961073

Haruna, S. and Mohammed, B.S. and Shahir-Liew, M. and Alaloul, W.S. and Haruna, A. (2018) Effect of water-binder ratio and naoh molarity on the properties of high calcium fly ash geopolymer mortars at outdoor curing. International Journal of Civil Engineering and Technology, 9 (10). pp. 1339-1352. ISSN 09766308

Hakim, W.M.D. and Mohd, Y.A.R. and Saeed, Q.M. (2018) Voltammetric determination of ampicillin and penicillin G at a mercury meniscus modified silver amalgam electrode. Research Journal of Chemistry and Environment, 22 (10). pp. 34-41. ISSN 09720626

Huzir, N.M. and Aziz, M.M.A. and Ismail, S.B. and Abdullah, B. and Mahmood, N.A.N. and Umor, N.A. and Syed Muhammad, S.A.F. (2018) Agro-industrial waste to biobutanol production: Eco-friendly biofuels for next generation. Renewable and Sustainable Energy Reviews, 94. pp. 476-485. ISSN 13640321

Hussain, M. and Yusof, K.W. and Mustafa, M.R.U. and Mahmood, R. and Jia, S. (2018) Evaluation of CMIP5 models for projection of future precipitation change in Bornean tropical rainforests. Theoretical and Applied Climatology, 134 (1-2). pp. 423-440. ISSN 0177798X

Hussain, K. and Bashir, N. and Hussain, Z. and Naz, M.Y. and Sulaiman, S.A. and Ghaffar, A. and Khan, K.M. (2018) Production of highly upgraded bio-oil by microwave�metal interaction pyrolysis of biomass in a copper coil reactor. International Journal of Green Energy, 15 (12). pp. 758-765. ISSN 15435075

Hussain, M. and Tufa, L.D. and Yusup, S. and Zabiri, H. (2018) A kinetic-based simulation model of palm kernel shell steam gasification in a circulating fluidized bed using Aspen Plus®: A case study. Biofuels, 9 (5). pp. 635-646. ISSN 17597269

Hussein, O.S. and Elraies, K.A. and Almansour, A. and Husin, H. and Mohd Shuhili, J.A.B. (2018) Beyond fracking: Enhancement of shale gas desorption via surface tension reduction and wettability alteration. Journal of Natural Gas Science and Engineering, 57. pp. 322-330. ISSN 18755100

Hassan, R. and Marimuthu, M. (2018) Contextualizing comprehensive board diversity and firm financial performance: Integrating market, management and shareholder's perspective. Journal of Management and Organization, 24 (5). pp. 634-678. ISSN 18333672

Hussain, Z. and Hussain, K. and Sulaiman, S.A. and Naz, M.Y. and Ibrahim, K.A. and Abdel-Salam, N.M. (2018) Preparation of upgraded bio-oil using two-step catalytic pyrolysis of fresh, putrefied, and microbe-treated biomass. Environmental Progress and Sustainable Energy, 37 (5). pp. 1836-1844. ISSN 19447442

Husin, H. and Elraies, K.A. and Choi, H.J. and Aman, Z. (2018) Influence of graphene nanoplatelet and silver nanoparticle on the rheological properties of water-based mud. Applied Sciences (Switzerland), 8 (8). ISSN 20763417

Hanamertani, A.S. and Pilus, R.M. and Manan, N.A. and Mutalib, M.I.A. (2018) The use of ionic liquids as additive to stabilize surfactant foam for mobility control application. Journal of Petroleum Science and Engineering, 167. pp. 192-201. ISSN 09204105

Hanamertani, A.S. and Pilus, R.M. and Manan, N.A. and Ahmed, S. and Awang, M. (2018) Ionic Liquid Application in Surfactant Foam Stabilization for Gas Mobility Control. Energy and Fuels, 32 (6). pp. 6545-6556. ISSN 08870624

Hamza, M.F. and Soleimani, H. and Sinnathambi, C.M. and Merican, Z.M.A. and Stephen, K.D. (2018) Laboratory characterization of crude oil and sandstone reservoir for chemical enhanced oil recovery. World Journal of Engineering, 15 (3). pp. 354-361. ISSN 17085284

Harun, N.Y. and Parvez, A.M. and Afzal, M.T. (2018) Process and energy analysis of pelleting agricultural and woody biomass blends. Sustainability (Switzerland), 10 (6). ISSN 20711050

Hematpur, H. and Mahmood, S.M. and Nasr, N.H. and Elraies, K.A. (2018) Foam flow in porous media: Concepts, models and challenges. Journal of Natural Gas Science and Engineering, 53. pp. 163-180. ISSN 18755100

Hashmani, M.A. and Abro, F.R. and Unar, M.A. and Watada, J. (2018) A novel algorithm to reduce peak-to-average power ratio of orthogonal frequency division multiplexing signals. Journal of Theoretical and Applied Information Technology, 96 (8). pp. 2106-2127. ISSN 19928645

Hasan, R. and Napiah, M. (2018) The perception of Malaysian pedestrians toward the use of footbridges. Traffic Injury Prevention, 19 (3). pp. 292-297. ISSN 15389588

Husin, H. and Solo, B.B. and Ibrahim, I.M. and Chyuan, O.H. and Roslan, A. (2018) Weight loss effect and potentiodynamic polarization response of 1-butyl-3-methylimidazolium chloride ionic liquid in highly acidic medium. Journal of Engineering Science and Technology, 13 (4). pp. 1005-1015. ISSN 18234690

Halim, A.H. and Ismail, I. (2018) Tree physiology optimization in constrained optimization problem. Telkomnika (Telecommunication Computing Electronics and Control), 16 (2). pp. 876-882. ISSN 16936930

Husham Abdulmalek, S. and Khalaji Assadi, M. and Al-Kayiem, H.H. and Gitan, A.A. (2018) A comparative analysis on the uniformity enhancement methods of solar thermal drying. Energy, 148. pp. 1103-1115. ISSN 03605442

Harun, W.S.W. and Kamariah, M.S.I.N. and Muhamad, N. and Ghani, S.A.C. and Ahmad, F. and Mohamed, Z. (2018) A review of powder additive manufacturing processes for metallic biomaterials. Powder Technology, 327. pp. 128-151. ISSN 00325910

Hanamertani A.S., Sr. and Pilus, R.M. and Idris, A.K. and Irawan, S. and Tan, I.M. (2018) Ionic liquids as a potential additive for reducing surfactant adsorption onto crushed Berea sandstone. Journal of Petroleum Science and Engineering. pp. 480-490. ISSN 09204105

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Irawan, S. (2018) A Meshfree Approach for Transient Heat Conduction Analysis of Nonlinear Functionally Graded Materials. International Journal of Computational Methods, 15 (2). ISSN 02198762

Hasan, M.H. and Akhir, E.A.P. and Aziz, N.A. and Aziz, I.A. and Jaafar, J. (2018) An analysis of parallelization in mamdani- and sugeno-type quality of web service fuzzy monitoring models. Journal of Theoretical and Applied Information Technology, 96 (3). pp. 722-731. ISSN 19928645

Hailegiorgis, S.M. and Khan, S.N. and Abdolah, N.H.H. and Ayoub, M. and Tesfamichael, A. (2018) Investigation of carbon dioxide solubility in aqueous N-methyldiethanolamine (MDEA)-1- butyl-3-methylimidazolium acetate (bmimAc) hybrid solvent. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 65-71. ISSN 22897879

Hamza, M.F. and Merican, Z.M.A. and Soleimani, H. and Abghari, S.Z. and Sinnathambi, C.M. and Stephen, K.D. (2018) A laboratory study of chemical enhanced oil recovery (CEOR) in compartmentalized sandstone reservoir: A case study of a 2-D phase macro-model reservoir. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 893-901. ISSN 18196608

Hassan, S. and Khanesar, M.A. and Jaafar, J. and Khosravi, A. (2018) Optimal parameters of an ELM-based interval type 2 fuzzy logic system: a hybrid learning algorithm. Neural Computing and Applications, 29 (4). pp. 1001-1014. ISSN 09410643

Hanouneh, S. and Amin, H.U. and Saad, N.M. and Malik, A.S. (2018) EEG Power and Functional Connectivity Correlates with Semantic Long-Term Memory Retrieval. IEEE Access, 6. pp. 8695-8703. ISSN 21693536

Hammad, D.B. and Shafiq, N. and Nuruddin, M.F. (2018) Vectors of Defects in Reinforced Concrete Structures in Onshore Oil and Gas Process Plants. Advances in Civil Engineering, 2018. ISSN 16878086

Haji Abd Samad, F. and Sulaiman, S. and Awang Rambli, D.R. and Hasbullah, H. (2018) Capturing haptic experience through users� visual sketches. Lecture Notes on Data Engineering and Communications Technologies, 5. pp. 412-419. ISSN 23674512

HanChern-Tong and Aziz, I. (2018) CMARPGA: Classification based on multiple association rules using parallel genetic algorithm pruned decision tree. Lecture Notes on Data Engineering and Communications Technologies, 5. pp. 554-560. ISSN 23674512

Haris, M. and Kakooei, S. and Ismail, M.C. (2018) Corrosion investigation of commercially available linepipe steel in CO2 environment. International Journal of Engineering and Technology(UAE), 7 (3). pp. 15-18. ISSN 2227524X

Hamidi, R. and Bashir, Y. and Ghosh, D.P. and Akhtar, S. and Sheikh, M.I. (2018) Application of multi attributes for feasibility study of fractures and structural anomalies in Malaysian Basin. International Journal of Engineering and Technology(UAE), 7 (3). pp. 84-87. ISSN 2227524X

Hashmani, M.A. and Jameel, S.M. and Ibrahim, A.M. and Zaffar, M. and Raza, K. (2018) An ensemble approach to big data security (Cyber Security). International Journal of Advanced Computer Science and Applications, 9 (9). pp. 75-77. ISSN 2158107X

Hayder, G. and Perumulselum, P. and Alhussian, H. (2018) Treatment of domestic wastewater with fixed bed biofilm reactor. International Journal of Engineering and Technology(UAE), 7 (4). pp. 22-25. ISSN 2227524X

Haruna, A. and Shafiq, N. and Montasir, O.A. and Haruna, S. (2018) Barriers for developing Building with low embodied energy multi criteria decision making approach. International Journal of Engineering and Technology(UAE), 7 (4). pp. 3126-3130. ISSN 2227524X

Hasan, M.K. and Othman, N.A. and Karim, S.A.A. and Sulaiman, J. (2018) Semi non-standard trimean algorithm for Rosenzweig-MacArthur interaction model. International Journal on Advanced Science, Engineering and Information Technology, 8 (4-2). pp. 1520-1527. ISSN 20885334

Hussain, A. and Mkpojiogu, E.O.C. and Suleiman, K. and Alhussian, H. (2018) A heuristic evaluation of a mobile print and design shopping application. Journal of Advanced Research in Dynamical and Control Systems, 10 (10 Spe). pp. 1457-1462. ISSN 1943023X

Hassan, R. and Marimuthu, M. (2018) Bridging and bonding: having a Muslim diversity on corporate boards and firm performance. Journal of Islamic Accounting and Business Research, 9 (3). pp. 457-478. ISSN 17590817

Hussain, N.A.A. and Ali, S.S.A. and Saad, M.N.M. and Ovinis, M. (2018) Nonlinear ROV modelling and control system design using adaptive U-model, FLC and PID control approaches. Defence S and T Technical Bulletin, 11 (1). pp. 77-89. ISSN 19856571

Hussain, N. and Iqbal, A. and Jeoti, V. (2018) Investigation into an efficient numerical modelling approach for estimating path-loss over variable terrain. International Journal of Engineering and Technology(UAE), 7 (2). pp. 26-30. ISSN 2227524X

Hermana, M. and Ngui, J.Q. and Sum, C.W. and Ghosh, D.P. (2018) Feasibility study of SQp and SQs attributes application for facies classification. Geosciences (Switzerland), 8 (1). ISSN 20763263

Hussain, K. and Bashir, N. and Hussain, Z. and Sulaiman, S.A. (2018) Cement catalyzed conversion of biomass into upgraded bio-oil through microwave metal interaction pyrolysis in aluminum coil reactor. Journal of Analytical and Applied Pyrolysis, 129. pp. 37-42. ISSN 01652370

I

Imam, A.A. and Basri, S. and Ahmad, R. and Watada, J. and González-Aparicio, M.T. (2018) Automatic schema suggestion model for NoSQL document-stores databases. Journal of Big Data, 5 (1). ISSN 21961115

Idris, A. and Harahap, I.S.H. and Ali, M.O.A. (2018) Jack up reliability analysis: An overview. Frontiers of Structural and Civil Engineering, 12 (4). pp. 504-514. ISSN 20952430

Iqbal, O. and Ahmad, M. and Kadir, A.A. (2018) Effective evaluation of shale gas reservoirs by means of an integrated approach to petrophysics and geomechanics for the optimization of hydraulic fracturing: A case study of the Permian Roseneath and Murteree Shale Gas reservoirs, Cooper Basin, Australia. Journal of Natural Gas Science and Engineering, 58. pp. 34-58. ISSN 18755100

Ismael, M.A. and Heikal, M.R. and Aziz, A.R.A. and Crua, C. and El-Adawy, M. and Nissar, Z. and Baharom, M.B. and Zainal, E.Z.A. and Firmansyah (2018) Investigation of puffing and micro-explosion of water-in-diesel emulsion spray using shadow imaging. Energies, 11 (9). ISSN 19961073

Isa, F. and Zabiri, H. and Ng, N.K.S. and Shariff, A.M. (2018) Purification of CO2 removal via promoted potassium carbonate: A review on modelling & simulation techniques. International Journal of Greenhouse Gas Control, 76. pp. 236-265. ISSN 17505836

Ismail, A. and Bhatti, M.S. and Faye, I. and Lu, C.K. and Laude, A. and Tang, T.B. (2018) Pulse waveform analysis on temporal changes in ocular blood flow due to caffeine intake: a comparative study between habitual and non-habitual groups. Graefe's Archive for Clinical and Experimental Ophthalmology, 256 (9). pp. 1711-1721. ISSN 0721832X

Irshad, K. and Khan, A.I. and Algarni, S. and Habib, K. and Saha, B.B. (2018) Objective and subjective evaluation of a sleeping environment test chamber with a thermoelectric air cooling system. Building and Environment, 141. pp. 155-165. ISSN 03601323

Irfan, M. and Moniruzzaman, M. and Ahmad, T. and Osman, O.Y. and Mandal, P.C. and Bhattacharjee, S. and Hussain, M. (2018) Stability, interparticle interactions and catalytic performance of gold nanoparticles synthesized through ionic liquid mediated oil palm leaves extract. Journal of Environmental Chemical Engineering, 6 (4). pp. 5024-5031. ISSN 22133437

Ismael, M.A. and Heikal, M.R. and Aziz, A.R.A. and Syah, F. and Zainal A., E.Z. and Crua, C. (2018) The effect of fuel injection equipment on the dispersed phase of water-in-diesel emulsions. Applied Energy, 222. pp. 762-771. ISSN 03062619

Iqbal, B. and Sarfaraz, Z. and Muhammad, N. and Ahmad, P. and Iqbal, J. and Khan, Z.U.H. and Gonfa, G. and Iqbal, F. and Jamal, A. and Rahim, A. (2018) Ionic liquid as a potential solvent for preparation of collagen-alginate-hydroxyapatite beads as bone filler. Journal of Biomaterials Science, Polymer Edition, 29 (10). pp. 1168-1184. ISSN 09205063

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2018) Phase-shifted full-bridge zero voltage switching DC-DC converter design with MATLAB/simulink implementation. International Journal of Electrical and Computer Engineering, 8 (3). pp. 1488-1497. ISSN 20888708

Izzyan, F. and Huynh, D. and Xiong, S. and Aziz, N. and Iida, H. (2018) Comparative study: A case study in analyzing gamification between MindSnacks and Duolingo. JP Journal of Heat and Mass Transfer, 15 (Specia). pp. 101-106. ISSN 09735763

Idris, I.H.M. and Yusof, N.Z. (2018) Development of low thermal mass cement-sand block utilizing peat soil and effective microorganism. Case Studies in Construction Materials, 8. pp. 8-15. ISSN 22145095

Irfan, S.A. and Razali, R. and KuShaari, K. and Mansor, N. and Azeem, B. and Ford Versypt, A.N. (2018) A review of mathematical modeling and simulation of controlled-release fertilizers. Journal of Controlled Release, 271. pp. 45-54. ISSN 01683659

Ismail, N.F. and Hasan, M.H. and Mustapha, E.E. (2018) Technology use, emotional connection and their relationship: A literature review. Journal of Theoretical and Applied Information Technology, 96 (1). pp. 127-139. ISSN 19928645

Ibad, S.M. and Padmanabhan, E. (2018) SPECTROSCOPIC AND PETROGRAPHIC CHARACTERIZATION OF SHALE FROM KUBANG PASU FORMATION, MALAYSIA. Petroleum and Coal, 60 (2). pp. 321-329. ISSN 13377027

Ibrahim, W.E. and MD Rafek, A.G. and Salim, A.M.A. (2018) Lithological variations in black shales and mudstone formations of central Sarawak, Malaysia. Petroleum and Coal, 60 (3). pp. 446-452. ISSN 13377027

Isa, N.H.M. and Othman, M. and Karim, S.A.A. (2018) Multivariate matrix for fuzzy linear regression model to analyse the taxation in Malaysia. International Journal of Engineering and Technology(UAE), 7 (4). pp. 78-82. ISSN 2227524X

Ibad, S.M. and Padmanabhan, E. (2018) Significance of spectroscopic characterization for determining depositional environment of organic matter in some devonian shale. Petroleum and Coal, 60 (6). pp. 1241-1249. ISSN 13377027

Imam, A.A. and Basri, S. and Ahmad, R. and Watada, J. and Gonzlez-Aparicio, M.T. and Almomani, M.A. (2018) Data modeling guidelines for NoSQL document-store databases. International Journal of Advanced Computer Science and Applications, 9 (10). pp. 544-555. ISSN 2158107X

Irshad, S. and Awang Rambli, D.R. and Muhamad Nazri, N.I.A. and Mohd Shukri, S.R. and Omar, Y. (2018) Measuring user experience of mobile augmented reality systems through non-instrumental quality attributes. Communications in Computer and Information Science, 886. pp. 349-357. ISSN 18650929

Ismail, A. and Hussain, P. and Mustapha, M. and Nuruddin, M.F. and Saat, A.M. and Abdullah, A. and Rahim, A.A.A. and Chevalier, S. (2018) Fe-Al diffusion bonding: Effect of reaction time on the interlayer thickness. Journal of Mechanical Engineering, 5 (Specia). pp. 80-91. ISSN 18235514

Ismael, M.A. and Heikal, M.R. and Aziz, A.R.A. and Crua, C. (2018) The effect of fuel injection equipment of water-in-diesel emulsions on micro-explosion behaviour. Energies, 11 (7). ISSN 19961073

Irshad, K. and Habib, K. and Saidur, R. (2018) Photovoltaic-assisted thermoelectric cooling and heating systems. Green Energy and Technology. pp. 251-272. ISSN 18653529

Imam, A.A. and Basri, S. and Ahmad, R. and Gilal, A.R. (2018) Data synchronization model for heterogeneous mobile databases and server-side database. International Journal of Advanced Computer Science and Applications, 9 (1). pp. 521-531. ISSN 2158107X

Ismail, O.A. and Mahmood, A.K. and Abdelmaboud, A. (2018) Factors influencing academic performance of students in blended and traditional domains. International Journal of Emerging Technologies in Learning, 13 (2). pp. 170-187. ISSN 18688799

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. and Ahmad, K. (2018) The mapping of full weld cycle heat profile for friction stir welding pipe butt joints. Advanced Structured Materials, 85. pp. 461-467. ISSN 18698433

Ismail, A. and Awang, M. and Rahman, F.A. and Baharudin, B.A. and Khalid, P.Z.M. and Hamid, D.A. (2018) Evaluation of the hardness distribution and fracture location in friction stir welded AA6063 pipe butt joints. Advanced Structured Materials, 85. pp. 439-444. ISSN 18698433

Iqbal, O. and Baig, M.S. and Pervez, S. and Siddiqi, M.I. (2018) Structure and stratigraphy of Rumbli and Panjar areas of Kashmir and Pakistan with the aid of GIS. Journal of the Geological Society of India, 91 (1). pp. 57-66. ISSN 00167622

J

Jusuf, B.N. and Sambudi, N.S. and Isnaeni, I. and Samsuri, S. (2018) Microwave-assisted synthesis of carbon dots from eggshell membrane ashes by using sodium hydroxide and their usage for degradation of methylene blue. Journal of Environmental Chemical Engineering, 6 (6). pp. 7426-7433. ISSN 22133437

Javvad ur Rehman, M. and Dass, S.C. and Asirvadam, V.S. (2018) A weighted likelihood criteria for learning importance densities in particle filtering. Eurasip Journal on Advances in Signal Processing, 2018 (1). ISSN 16876172

Jamil, A. and Oh, P.C. and Shariff, A.M. (2018) Polyetherimide-montmorillonite mixed matrix hollow fibre membranes: Effect of inorganic/organic montmorillonite on CO2/CH4 separation. Separation and Purification Technology, 206. pp. 256-267. ISSN 13835866

Jafary, T. and Daud, W.R.W. and Aljlil, S.A. and Ismail, A.F. and Al-Mamun, A. and Baawain, M.S. and Ghasemi, M. (2018) Simultaneous organics, sulphate and salt removal in a microbial desalination cell with an insight into microbial communities. Desalination, 445. pp. 204-212. ISSN 00119164

Jatoi, M.A. and Kamel, N. (2018) Brain source localization using reduced EEG sensors. Signal, Image and Video Processing, 12 (8). pp. 1447-1454. ISSN 18631703

Jahan, S. and Sakidin, H. and Nazar, R. and Pop, I. (2018) Analysis of heat transfer in nanofluid past a convectively heated permeable stretching/shrinking sheet with regression and stability analyses. Results in Physics, 10. pp. 395-405. ISSN 22113797

Jibril, Z.I. and Ramli, A. and Jumbri, K. (2018) Al-MCM-41 based catalysts for transesterification of Jatropha oil to biodiesel: Effect of Ce and Zr. Nihon Enerugi Gakkaishi/Journal of the Japan Institute of Energy, 97 (7). pp. 200-204. ISSN 09168753

Jahan, S. and Sakidin, H. and Nazar, R. and Pop, I. (2018) Unsteady flow and heat transfer past a permeable stretching/shrinking sheet in a nanofluid: A revised model with stability and regression analyses. Journal of Molecular Liquids, 261. pp. 550-564. ISSN 01677322

JosephNg, P.S. (2018) EaaS Optimization: Available yet hidden information technology infrastructure inside medium size enterprise. Technological Forecasting and Social Change, 132. pp. 165-173. ISSN 00401625

Jun, L.Y. and Zung, L.S. (2018) Integrated reservoir characterization of low resistivity thin beds using three-dimensional modeling for natural gas exploration. Bulletin of the Geological Society of Malaysia, 65. pp. 91-99. ISSN 01266187

Janjuhah, H.T. and Salim, A.M.A. and Alansari, A. and Ghosh, D.P. (2018) Presence of microporosity in Miocene carbonate platform, Central Luconia, offshore Sarawak, Malaysia. Arabian Journal of Geosciences, 11 (9). ISSN 18667511

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2018) Effects of amine-functionalization on mixed matrix membranes encompassing of T-type zeolite and 6FDA-based polyimide for separation of CO2 from CH4. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5126-5134. ISSN 22298649

Jumbri, K. and Noh, N.S.F.M. and Ahmad, N.A. and Rahman, M.B.A. and Ahmad, H. (2018) Synthesis and characterization of new cholinium-based ionic liquids for antimicrobial application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 16-23. ISSN 22897879

Jamaludin, S.N.F. and Pubellier, M. and Menier, D. (2018) Structural Restoration of Carbonate Platform in the Southern Part of Central Luconia, Malaysia. Journal of Earth Science, 29 (1). pp. 155-168. ISSN 1674487X

Jaludin, J.E. and Zung, L.S. and Rafek, A.G.M. (2018) Application of spectral decomposition for evaluation of fluvial channel in 'B' field, Malay Basin, Malaysia. Journal of Engineering and Applied Sciences, 13 (12). pp. 4336-4343. ISSN 1816949X

Javaid, M.U. and Isha, A.S.N. and Sabir, A.A. and Ghazali, Z. and Nübling, M. (2018) Does Psychosocial Work Environment Factors Predict Stress and Mean Arterial Pressure in the Malaysian Industry Workers? BioMed Research International, 2018. ISSN 23146133

Jaafar, J. and Gilal, A.R. and Omar, M. and Basri, S. and Aziz, I.A. and Hasan, M.H. (2018) A Rough-Fuzzy Inference System for Selecting Team Leader for Software Development Teams. Advances in Intelligent Systems and Computing, 661. pp. 304-314. ISSN 21945357

K

Kim, D.K. and Lim, H.L. and Yu, S.Y. (2018) A technical review on ultimate strength prediction of stiffened panels in axial compression. Ocean Engineering, 170. pp. 392-406. ISSN 00298018

Kannan, R. and Khalid, H. and Indragandhi, V. and Albert Alexander, S. (2018) Threshold voltage and drain current investigation of power MOSFET ZVN3320FTA by 2D simulations. International Journal of Simulation: Systems, Science and Technology, 19 (6). 39.1-39.6. ISSN 14738031

Khan, A. and Ali, M. and Ilyas, A. and Naik, P. and Vankelecom, I.F.J. and Gilani, M.A. and Bilad, M.R. and Sajjad, Z. and Khan, A.L. (2018) ZIF-67 filled PDMS mixed matrix membranes for recovery of ethanol via pervaporation. Separation and Purification Technology, 206. pp. 50-58. ISSN 13835866

Kim, D.K. and Poh, B.Y. and Lee, J.R. and Paik, J.K. (2018) Ultimate strength of initially deflected plate under longitudinal compression: Part i = An advanced empirical formulation. Structural Engineering and Mechanics, 68 (2). pp. 247-259. ISSN 12254568

Kim, D.K. and Ng, W.C.K. and Hwang, O. (2018) An empirical formulation to predict maximum deformation of blast wall under explosion. Structural Engineering and Mechanics, 68 (2). pp. 237-245. ISSN 12254568

Khan, M.S. and Lal, B. and Keong, L.K. and Sabil, K.M. (2018) Experimental evaluation and thermodynamic modelling of AILs alkyl chain elongation on methane riched gas hydrate system. Fluid Phase Equilibria, 473. pp. 300-309. ISSN 03783812

Kim, D.K. and Ng, W.C.K. and Hwang, O.J. and Sohn, J.M. and Lee, E.B. (2018) Recommended finite element formulations for the analysis of offshore blast walls in an explosion. Latin American Journal of Solids and Structures, 15 (10). pp. 1-32. ISSN 16797817

Khodapanah, N. and Idris, A. and Khodapanah, L. and Soltani, S.M. and Yunus, R. (2018) Enhanced coagulant extraction from Jatropha curcas in aqueous solutions and its application in turbidity removal. Desalination and Water Treatment, 129. pp. 227-233. ISSN 19443994

Kanesan, D. and Irawan, S. and Ridha, S. and Chandran, D. and Azhar, N.A.B. (2018) The suitability offly ashbased geopolymer cement for oil well cementing applications: A review. ARPN Journal of Engineering and Applied Sciences, 13 (20). pp. 8297-8316. ISSN 18196608

Kurnia, J.C. and Sasmito, A.P. (2018) Numerical investigation of heat transfer performance of a rotating latent heat thermal energy storage. Applied Energy, 227. pp. 542-554. ISSN 03062619

Khan, M.I. and Zaini, D. and Shariff, A.M. and Moniruzzaman, M. (2018) Probabilistic ecotoxicological risk assessment of imidazolium ionic liquids with amino acid and halide anions. Journal of Mechanical Engineering and Sciences, 12 (3). pp. 3798-3810. ISSN 22894659

Kanesan, D. and Mohyaldin, M.E. (2018) A review: The effects of particle properties on solid particle erosion for oil and gas pipelines applications. ARPN Journal of Engineering and Applied Sciences, 13 (18). pp. 4882-4896. ISSN 18196608

Kadir, W.N.A. and Lam, M.K. and Uemura, Y. and Lim, J.W. and Lee, K.T. (2018) Harvesting and pre-treatment of microalgae cultivated in wastewater for biodiesel production: A review. Energy Conversion and Management, 171. pp. 1416-1429. ISSN 01968904

Khan, Z. and Yusup, S. and Ahmad, M.M. and Inayat, A. and Naqvi, M. and Sheikh, R. and Watson, I. (2018) Integrated catalytic adsorption steam gasification in a bubbling fluidized bed for enhanced H2 production: perspective of design and pilot plant experiences. Biofuels, Bioproducts and Biorefining, 12 (5). pp. 735-748. ISSN 1932104X

Khan, Z. and Yusup, S. and Kamble, P. and Naqvi, M. and Watson, I. (2018) Assessment of energy flows and energy efficiencies in integrated catalytic adsorption steam gasification for hydrogen production. Applied Energy, 225. pp. 346-355. ISSN 03062619

Khan, A. and Ali, S.S.A. and Anwer, A. and Adil, S.H. and Meriaudeau, F. (2018) Subsea pipeline corrosion estimation by restoring and enhancing degraded underwater images. IEEE Access, 6. pp. 40585-40601. ISSN 21693536

Khed, V.C. and Mohammed, B.S. and Shahir Liew, M. and Alaloul, W.S. and Adamu, M. (2018) Hybrid fibre rubberized ECC optimization for modulus of elasticity. International Journal of Civil Engineering and Technology, 9 (7). pp. 918-928. ISSN 09766308

Khed, V.C. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Adamu, M. and Al-Fakih, A. and Karthikeyan, J. (2018) Experimental investigation on pullout strength of hybrid reinforcement of fibre in rubberized cementitious composites. International Journal of Civil Engineering and Technology, 9 (7). pp. 1612-1622. ISSN 09766308

Khan, M.S. and Bavoh, C.B. and Partoon, B. and Nashed, O. and Lal, B. and Mellon, N.B. (2018) Impacts of ammonium based ionic liquids alkyl chain on thermodynamic hydrate inhibition for carbon dioxide rich binary gas. Journal of Molecular Liquids, 261. pp. 283-290. ISSN 01677322

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. (2018) Experimental investigation of performance and emission characteristics of an idi diesel engine using homogenized water in diesel emulsion. International Journal of Mechanical and Production Engineering Research and Development, 8 (3). pp. 933-942. ISSN 22496890

Kumar, M. and Das, B. and Nallagownden, P. and Elamvazuthi, I. and Khan, S.A. (2018) Optimal configuration of wind farms in radial distribution system using particle swarm optimization technique. Bulletin of Electrical Engineering and Informatics, 7 (2). pp. 286-293. ISSN 20893191

Kin, L.K. and Baheta, A.T. and Habib, K. (2018) Analytical investigation of thermoelectric performance for cooling application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 32-40. ISSN 22897879

Khan, M.A. and Ali, A. and Jeoti, V. and Manzoor, S. (2018) A Chaos-Based Substitution Box (S-Box) Design with Improved Differential Approximation Probability (DP). Iranian Journal of Science and Technology - Transactions of Electrical Engineering, 42 (2). pp. 219-238. ISSN 22286179

Kim, D.K. and Incecik, A. and Choi, H.S. and Wong, E.W.C. and Yu, S.Y. and Park, K.S. (2018) A simplified method to predict fatigue damage of offshore riser subjected to vortex-induced vibration by adopting current index concept. Ocean Engineering, 157. pp. 401-411. ISSN 00298018

Koh, K.J. and Mohd Yassin, A.Y. and Latheef, M. (2018) On the buoyancy load formulation for geometrically nonlinear analysis of flexible marine risers. Ocean Engineering, 157. pp. 313-324. ISSN 00298018

Kajo, I. and Kamel, N. and Ruichek, Y. and Malik, A.S. (2018) SVD-Based Tensor-Completion Technique for Background Initialization. IEEE Transactions on Image Processing, 27 (6). pp. 3114-3126. ISSN 10577149

Kadir, M.F.Z. and Salleh, N.S. and Hamsan, M.H. and Aspanut, Z. and Majid, N.A. and Shukur, M.F. (2018) Biopolymeric electrolyte based on glycerolized methyl cellulose with NH4Br as proton source and potential application in EDLC. Ionics, 24 (6). pp. 1651-1662. ISSN 09477047

Kandasamy, S. and Moniruzzaman, M. and Sivapragasam, M. and Shamsuddin, M.R. and Mutalib, M.I.A. (2018) Formulation and characterization of acetate based ionic liquid in oil microemulsion as a carrier for acyclovir and methotrexate. Separation and Purification Technology, 196. pp. 149-156. ISSN 13835866

Kueh, B.W.B. and Yusup, S. and Osman, N. (2018) Supercritical carbon dioxide extraction of Melaleuca cajuputi leaves for herbicides allelopathy: Optimization and kinetics modelling. Journal of CO2 Utilization, 24. pp. 220-227. ISSN 22129820

Kartikawati, N.A. and Safdar, R. and Lal, B. and Mutalib, M.I.B.A. and Shariff, A.M. (2018) Measurement and correlation of the physical properties of aqueous solutions of ammonium based ionic liquids. Journal of Molecular Liquids, 253. pp. 250-258. ISSN 01677322

Kamarulzaman, P.S.D. and Yusup, S. and Osman, N. and Ramli@Yusof, N.H. and Kueh, B.W.B. and Talib, R. (2018) Effectiveness of neem based biopesticide to enhance rice (Oryza sativa) productivity. Sustainable Chemistry and Pharmacy, 7. pp. 36-40. ISSN 23525541

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Shariff, A.M. (2018) Solubility of CO2 in piperazine (PZ) activated aqueous N-methyldiethanolamine (MDEA) solvent under high pressure. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 96-102. ISSN 22897879

Kadhim, S.K. and Nasif, M.S. and Al-Kayiem, H.H. and Al-Waked, R. (2018) Computational fluid dynamics simulation of blood flow profile and shear stresses in bileaflet mechanical heart valve by using monolithic approach. Simulation, 94 (2). pp. 93-104. ISSN 00375497

Khan, A.S. and Man, Z. and Bustam, M.A. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Shah, F.U. and Muhammad, N. (2018) Efficient conversion of lignocellulosic biomass to levulinic acid using acidic ionic liquids. Carbohydrate Polymers, 181. pp. 208-214. ISSN 01448617

Kose, U. and Vasant, P. (2018) A model of swarm intelligence based optimization framework adjustable according to problems. Studies in Computational Intelligence, 741. pp. 21-38. ISSN 1860949X

Kumalasari, I. and Napiah, M. and Sutanto, M.H. (2018) A review on phase change materials incorporation in asphalt pavement. Indonesian Journal of Science and Technology, 3 (2). pp. 171-179. ISSN 25281410

Karim, S.A.B.A. (2018) Constrained data interpolation using C2 rational cubic spline. Journal of Engineering and Applied Sciences, 13 (23). pp. 10053-10058. ISSN 1816949X

Karim, S.A.A. and Saaban, A. and Hasan, M.K. and Sulaiman, J. and Hashim, I. (2018) Interpolation using Cubic Bèzier Triangular Patches. International Journal on Advanced Science, Engineering and Information Technology, 8 (4-2). pp. 1746-1752. ISSN 20885334

Kareem, S. and Binti Ahmad, R. and Binti Sarlan, A. and Hussain, A. (2018) Extraction of associations from electronic health records using association rules mining. Journal of Advanced Research in Dynamical and Control Systems, 10 (10 Spe). pp. 1274-1284. ISSN 1943023X

Kairi, M.I. and Dayou, S. and Kairi, N.I. and Bakar, S.A. and Vigolo, B. and Mohamed, A.R. (2018) Toward high production of graphene flakes-a review on recent developments in their synthesis methods and scalability. Journal of Materials Chemistry A, 6 (31). pp. 15010-15026. ISSN 20507488

Karim, S.A.A. and Ismail, M.T. and Othman, M. and Abdullah, M.F. and Hasan, M.K. and Sulaiman, J. (2018) Rational cubic spline interpolation for missing solar data imputation. Journal of Engineering and Applied Sciences, 13 (9). pp. 2587-2592. ISSN 1816949X

Khan, A.M. and Jeoti, V. and Rehman, M.Z.U. and Jilani, M.T. and Chugtai, O. and Rehmani, M.H. (2018) Pilot-Based Time Domain SNR Estimation for Broadcasting OFDM Systems. Journal of Computer Networks and Communications, 2018. ISSN 20907141

Kanesan, D. and Suppiah, R. and Zubir, M.S.B. (2018) A study on the thickening time of class F fly ash geopolymer cement for oil well cementing. ARPN Journal of Engineering and Applied Sciences, 13 (2). pp. 682-685. ISSN 18196608

Khan, S.N. and Hailegiorgis, S.M. and Man, Z. and Garg, S. and Shariff, A.M. and Farrukh, S. and Ayoub, M. and Ghaedi, H. (2018) High-pressure absorption study of CO2 in aqueous N-methyldiethanolamine (MDEA) and MDEA-piperazine (PZ)-1-butyl-3-methylimidazolium trifluoromethanesulfonate bmimOTf hybrid solvents. Journal of Molecular Liquids, 249. pp. 1236-1244. ISSN 01677322

Khan, A.S. and Nasrullah, A. and Ullah, Z. and Bhat, A.H. and Ghanem, O.B. and Muhammad, N. and Rashid, M.U. and Man, Z. (2018) Thermophysical properties and ecotoxicity of new nitrile functionalised protic ionic liquids. Journal of Molecular Liquids, 249. pp. 583-590. ISSN 01677322

Khan, A.S. and Man, Z. and Bustam, M.A. and Kait, C.F. and Nasrullah, A. and Ullah, Z. and Sarwono, A. and Ahamd, P. and Muhammad, N. (2018) Dicationic ionic liquids as sustainable approach for direct conversion of cellulose to levulinic acid. Journal of Cleaner Production, 170. pp. 591-600. ISSN 09596526

Kong, H. and Cheu, S.C. and Othman, N.S. and Song, S.T. and Johari, K. and Saman, N. and Lye, J.W.P. and Mat, H. (2018) Cetyltrimethylammonium bromide-coated agrosorbents and their high benzene adsorption performance from aqueous solution. Environmental Progress and Sustainable Energy, 37 (1). pp. 305-317. ISSN 19447442

Kajo, I. and Kamel, N. and Malik, A.S. (2018) An adaptive block-based matching algorithm for crowd motion sequences. Multimedia Tools and Applications, 77 (2). pp. 1783-1809. ISSN 13807501

L

Lim, J.-W. and Mohd Zaid, H.F. and Isa, M.H. and Oh, W.-D. and Adnan, R. and Bashir, M.J.K. and Kiatkittipong, W. and Wang, D.K. (2018) Shielding immobilized biomass cryogel beads with powdered activated carbon for the simultaneous adsorption and biodegradation of 4-chlorophenol. Journal of Cleaner Production, 205. pp. 828-835. ISSN 09596526

Lebelo, R.S. and Moloi, K.C. and Okosun, K.O. and Mukamuri, M. and Adesanya, S.O. and Muthuvalu, M.S. (2018) Two-step low-temperature oxidation for thermal stability analysis of a combustible sphere. Alexandria Engineering Journal, 57 (4). pp. 2829-2835. ISSN 11100168

Lee, K. and Lee, J. and Dass, S.C. (2018) Inference for differential equation models using relaxation via dynamical systems. Computational Statistics and Data Analysis, 127. pp. 116-134. ISSN 01679473

Lim, B.-C. and Lim, J.-W. and Ho, Y.-C. (2018) Garden cress mucilage as a potential emerging biopolymer for improving turbidity removal in water treatment. Process Safety and Environmental Protection, 119. pp. 233-241. ISSN 09575820

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. and Jusoh, N. and Ahmad, F. (2018) An atomistic simulation towards elucidation of operating temperature effect in CO2 swelling of polysulfone polymeric membranes. Journal of Natural Gas Science and Engineering, 57. pp. 135-154. ISSN 18755100

Li, S.-A. and Wang, W.-Y. and Pan, W.-Z. and Hsu, C.-C.J. and Lu, C.-K. (2018) FPGA-based hardware design for scale-invariant feature transform. IEEE Access, 6. pp. 43850-43864. ISSN 21693536

Leong, W.-H. and Lim, J.-W. and Lam, M.-K. and Uemura, Y. and Ho, Y.-C. (2018) Third generation biofuels: A nutritional perspective in enhancing microbial lipid production. Renewable and Sustainable Energy Reviews, 91. pp. 950-961. ISSN 13640321

Loy, A.C.M. and Gan, D.K.W. and Yusup, S. and Chin, B.L.F. and Lam, M.K. and Shahbaz, M. and Unrean, P. and Acda, M.N. and Rianawati, E. (2018) Thermogravimetric kinetic modelling of in-situ catalytic pyrolytic conversion of rice husk to bioenergy using rice hull ash catalyst. Bioresource Technology, 261. pp. 213-222. ISSN 09608524

Lias, M.R. and Awang, M. and Talib, M.N. and Senawi, A.R. and Samad, M.A. (2018) Investigation of axial misalignment effects to the gear tooth strength properties using FEM model. Journal of Mechanical Engineering and Sciences, 12 (2). pp. 3581-3592. ISSN 22894659

Leong, W.-H. and Lim, J.-W. and Lam, M.-K. and Uemura, Y. and Ho, C.-D. and Ho, Y.-C. (2018) Co-cultivation of activated sludge and microalgae for the simultaneous enhancements of nitrogen-rich wastewater bioremediation and lipid production. Journal of the Taiwan Institute of Chemical Engineers, 87. pp. 216-224. ISSN 18761070

Loy, A.C.M. and Yusup, S. and Lam, M.K. and Chin, B.L.F. and Shahbaz, M. and Yamamoto, A. and Acda, M.N. (2018) The effect of industrial waste coal bottom ash as catalyst in catalytic pyrolysis of rice husk for syngas production. Energy Conversion and Management, 165. pp. 541-554. ISSN 01968904

Leong, K.-Y. and Loo, S.-L. and Bashir, M.J.K. and Oh, W.-D. and Rao, P.V. and Lim, J.-W. (2018) Bioregeneration of spent activated carbon: Review of key factors and recent mathematical models of kinetics. Chinese Journal of Chemical Engineering, 26 (5). pp. 893-902. ISSN 10049541

Lee, C.T. and Mohammad Rozali, N.E. and Klemeš, J.J. and Towprayoon, S. (2018) Advancing low-carbon emissions in Asia: mitigation of greenhouse gases and enhancing economic feasibility for major sectors. Clean Technologies and Environmental Policy, 20 (3). pp. 441-442. ISSN 1618954X

Lee, C.T. and Mohammad Rozali, N.E. and Van Fan, Y. and Klemeš, J.J. and Towprayoon, S. (2018) Low-carbon emission development in Asia: energy sector, waste management and environmental management system. Clean Technologies and Environmental Policy, 20 (3). pp. 443-449. ISSN 1618954X

Lee, S.-P. and Mellon, N. and Shariff, A.M. and Leveque, J.-M. (2018) High-pressure CO2-CH4 selective adsorption on covalent organic polymer. Journal of Natural Gas Science and Engineering, 50. pp. 139-146. ISSN 18755100

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Bustam, M.A. (2018) Thickness dependent penetrant gas transport properties and separation performance within ultrathin polysulfone membrane: Insights from atomistic molecular simulation. Journal of Polymer Science, Part B: Polymer Physics, 56 (2). pp. 131-158. ISSN 08876266

Luqman Hakim, H. and Ku Zilati, K.Z. and Muhammad Harris, N. (2018) Parameters affecting coating uniformity of alkali -activated material coated fertilizer. International Journal of Engineering and Technology(UAE), 7 (3). pp. 33-37. ISSN 2227524X

Loo, S.H. and Liaw, K.K. and Lo, S.-Z. (2018) Integrated approach to delineate meandering channel sands as potential stratigraphic traps. International Journal of Engineering and Technology(UAE), 7 (4). pp. 521-526. ISSN 2227524X

Lock, S.S.M. and Lau, K.K. and Lock, I.S.M. and Shariff, A.M. and Yeong, Y.F. and Ahmad, F. (2018) Empirical model of operating temperature and pressure effect towards pure and binary O2/N2 Gas permeability in polysulfone membrane. Key Engineering Materials, 777 KE. pp. 238-244. ISSN 10139826

Lee, S.-P. and Mellon, N. and Shariff, A.M. and Leveque, J.-M. (2018) Geometry variation in porous covalent triazine polymer (CTP) for CO2 adsorption. New Journal of Chemistry, 42 (18). pp. 15488-15496. ISSN 11440546

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. and Ahmad, F. (2018) Mathematical modelling of thickness and temperature dependent physical aging to O2/N2 gas separation in polymeric membranes. RSC Advances, 8 (53). pp. 30265-30279. ISSN 20462069

Lal, B. and Shariff, A.M. and Mukhtar, H. and Nasir, Q. and Qasim, A. (2018) An overview of cryogenic separation techniques for natural gas with high CO2 content. Journal of Engineering and Applied Sciences, 13 (8). pp. 2152-2155. ISSN 1816949X

Lai, G.T. and Mang, W.J. and Rafek, A.G. and Serasa, A.S. and Mazlan, N.A. and Razib, A.M.M. and Hussin, A. and Ern, L.K. and Mohamed, T.R. (2018) Stability assessment of limestone cave: Batu Caves, Selangor, Malaysia. Sains Malaysiana, 47 (1). pp. 59-66. ISSN 01266039

Lemma, T.A. (2018) Intelligent Fault Detection and Diagnostics. Studies in Computational Intelligence, 743. pp. 99-117. ISSN 1860949X

Lemma, T.A. (2018) Literature Review. Studies in Computational Intelligence, 743. pp. 11-35. ISSN 1860949X

Lemma, T.A. (2018) Introduction. Studies in Computational Intelligence, 743. pp. 1-10. ISSN 1860949X

Lemma, T.A. (2018) Model Uncertainity, Fault Detection and Diagnostics. Studies in Computational Intelligence, 743. pp. 75-97. ISSN 1860949X

Lemma, T.A. (2018) Application Studies, Part-I: Model Identification and Validation. Studies in Computational Intelligence, 743. pp. 119-169. ISSN 1860949X

Lemma, T.A. (2018) Model Identification Using Neuro-Fuzzy Approach. Studies in Computational Intelligence, 743. pp. 37-74. ISSN 1860949X

Lemma, T.A. (2018) Preface. Studies in Computational Intelligence, 743. vii-viii. ISSN 1860949X

M

Mohammed, B.S. and Achara, B.E. and Liew, M.S. (2018) The influence of high temperature on microstructural damage and residual properties of nano-silica-modified (NS-modified) self-consolidating engineering cementitious composites (SC-ECC) using response surface methodology (RSM). Construction and Building Materials, 192. pp. 450-466. ISSN 09500618

Mang, W.J. and Rafek, A.G.M. (2018) Durability characterisation of weathered sedimentary rocks using slake durability index and jar slake test. Bulletin of the Geological Society of Malaysia, 66. pp. 81-88. ISSN 01266187

Malik, M.H.A. and Zung, L.S. and Rafek, A.G.M. (2018) Exploration potential for stratigraphic traps in field X, Malay basin. Bulletin of the Geological Society of Malaysia, 66. pp. 121-127. ISSN 01266187

Muda, N.R.S. and Wardana, I.N.G. and Hamidi, N. and Yuliati, L. and Witjaksono, G. (2018) Electron spins coupling of coconut shell activated nanocarbons in solid propellant on improving to the thrust stability and specific impulses. Journal of Mechanical Engineering and Sciences, 12. pp. 4001-4017. ISSN 22894659

Mahgoub, M.I. and Padmanabhan, E. and Abdullatif, O.M. (2018) Facies and porosity 3D models constrained by stochastic seismic inversion to delineate Paleocene fluvial/lacustrine reservoirs in Melut Rift Basin, Sudan. Marine and Petroleum Geology, 98. pp. 79-96. ISSN 02648172

Mohammed, B.S. and Khed, V.C. and Liew, M.S. (2018) Optimization of hybrid fibres in engineered cementitious composites. Construction and Building Materials, 190. pp. 24-37. ISSN 09500618

Malkawi, A.B. and Al-Mattarneh, H. and Achara, B.E. and Muhammed, B.S. and Nuruddin, M.F. (2018) Dielectric properties for characterization of fly ash-based geopolymer binders. Construction and Building Materials, 189. pp. 19-32. ISSN 09500618

Mohsin, H.M. and Johari, K. and Shariff, A.M. (2018) Virgin coconut oil (VCO) and potassium glycinate (PG) mixture as absorbent for carbon dioxide capture. Fuel, 232. pp. 454-462. ISSN 00162361

Murugiah, P.S. and Oh, P.C. and Lau, K.K. (2018) Impregnation of carbonaceous nanofibers into glassy polymer-based composite membrane for CO2 separation. Chinese Journal of Chemical Engineering, 26 (11). pp. 2385-2390. ISSN 10049541

Majeed, Z. and Mansor, N. and Ajab, Z. and Man, Z. and Sarwano, A. and Ahmad, B. and Hussain, Z. (2018) Lignin linked to slow biodegradability of urea-crosslinked starch in an anaerobic soil environment. E-Polymers, 18 (6). pp. 473-483. ISSN 16187229

Murshid, G. and Ghaedi, H. and Ayoub, M. and Mjalli, F.S. and Garg, S. (2018) Volumetric properties of non-aqueous binary mixture of diethanolamine (DEA) and dimethylformamide (DMF). Journal of Environmental Chemical Engineering, 6 (5). pp. 6390-6398. ISSN 22133437

Minh Loy, A.C. and Yusup, S. and Fui Chin, B.L. and Wai Gan, D.K. and Shahbaz, M. and Acda, M.N. and Unrean, P. and Rianawati, E. (2018) Comparative study of in-situ catalytic pyrolysis of rice husk for syngas production: Kinetics modelling and product gas analysis. Journal of Cleaner Production, 197. pp. 1231-1243. ISSN 09596526

Mumtaz, W. and Malik, A.S. (2018) A Comparative Study of Different EEG Reference Choices for Diagnosing Unipolar Depression. Brain Topography, 31 (5). pp. 875-885. ISSN 08960267

Mohammad, S.T. and Al-Kayiem, H.H. and Assadi, M.K. and Sabir, O. and Khlief, A.K. (2018) An integrated program of a stand-Alone parabolic trough solar thermal power plant: Code description and test. Case Studies in Thermal Engineering, 12. pp. 26-37. ISSN 2214157X

Mumtaz, A. and Mohamed, N.M. and Irshad, M.I. and Yar, A. and Mohamed Saheed, M.S. (2018) Mutual effect of extrinsic defects and electronic carbon traps of M-TiO2 (M = V, Co, Ni) nanorod arrays on photoexcited charge extraction of CdS for superior photoelectrochemical activity of hydrogen production. International Journal of Hydrogen Energy, 43 (31). pp. 14388-14405. ISSN 03603199

Mohamed, E.A. and Yusoff, M.Z. and Malik, A.S. and Bahloul, M.R. and Adam, D.M. and Adam, I.K. (2018) Comparison of EEG signal decomposition methods in classification of motor-imagery BCI. Multimedia Tools and Applications, 77 (16). pp. 21305-21327. ISSN 13807501

Mohammad Rozali, N.E. and Ho, W.S. and Wan Alwi, S.R. and Manan, Z.A. and Klemeš, J.J. and Mohd Yunus, M.N.S. and Syed Mohd Zaki, S.A.A. (2018) Peak-off-peak load shifting for optimal storage sizing in hybrid power systems using Power Pinch Analysis considering energy losses. Energy, 156. pp. 299-310. ISSN 03605442

Moshikur, R.M. and Chowdhury, M.R. and Wakabayashi, R. and Tahara, Y. and Moniruzzaman, M. and Goto, M. (2018) Characterization and cytotoxicity evaluation of biocompatible amino acid esters used to convert salicylic acid into ionic liquids. International Journal of Pharmaceutics, 546 (1-2). pp. 31-38. ISSN 03785173

Mertens, M. and Bilad, M.R. and Gebreyohannes, A.Y. and Marbelia, L. and Vankelecom, I.F.J. (2018) Membrane development for improved performance of a magnetically induced vibration system for anaerobic sludge filtration. Separation and Purification Technology, 200. pp. 120-129. ISSN 13835866

Mayoral, E.J. and Gámez Vintaned, J.A. and Diez, J.B. and Liñán, E. (2018) Carboniferous trace fossils from vélez-málaga (Maláguide Complex, Betic Cordillera, SE Spain) Icnofósiles del carbonífero del complejo Maláguide en Vélez-Málaga (Cordillera Bética, SE de España). Spanish Journal of Palaeontology, 33 (1). pp. 89-104. ISSN 22550550

Mohd-Sahib, A.-A. and Lim, J.-W. and Lam, M.-K. and Uemura, Y. and Ho, C.-D. and Oh, W.-D. and Tan, W.-N. (2018) Mechanistic kinetic models describing impact of early attachment between Chlorella vulgaris and polyurethane foam material in fluidized bed bioreactor on lipid for biodiesel production. Algal Research, 33. pp. 209-217. ISSN 22119264

Mohd Razib, A.M. and Lai, G.T. and Mazlan, N.A. and Abdul Ghani, M.F. and Tuan Mohamed, T.R. and Rafek, A.G. and Serasa, A.S. and Chen, Y. and Zhang, M. (2018) A systematic approach of rock slope stability assessment: A case study at Gunung Kandu, Gopeng, Perak, Malaysia. Sains Malaysiana, 47 (7). pp. 1413-1421. ISSN 01266039

Mokhtar, A.A. and Zulkifli, A. (2018) Effects of flow velocity on RBI analysis of cooling water heat exchangers. ARPN Journal of Engineering and Applied Sciences, 13 (14). pp. 4265-4271. ISSN 18196608

Marbelia, L. and Bilad, M.R. and Maes, S. and Arafat, H.A. and Vankelecom, I.F.J. (2018) Poly(vinylidene fluoride)-Based Membranes for Microalgae Filtration. Chemical Engineering and Technology, 41 (7). pp. 1305-1312. ISSN 09307516

Mubashir, M. and Yeong, Y.F. and Lau, K.K. and Chew, T.L. and Norwahyu, J. (2018) Efficient CO2/N2 and CO2/CH4 separation using NH2-MIL-53(Al)/cellulose acetate (CA) mixed matrix membranes. Separation and Purification Technology, 199. pp. 140-151. ISSN 13835866

Masyhur, E.M.H. and Jus, W.N.W. and Bakar, M.N.A. (2018) Field study to identify river plume extension of Kerian river discharge during neap and spring tide. Bulletin of the Geological Society of Malaysia, 65. pp. 13-18. ISSN 01266187

Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. and Hoong, C.Y. and Adamu, M. (2018) Properties of nano-silica modified pervious concrete. Case Studies in Construction Materials, 8. pp. 409-422. ISSN 22145095

Mohammed, B.S. and Liew, M.S. and S Alaloul, W. and Al-Fakih, A. and Ibrahim, W. and Adamu, M. (2018) Development of rubberized geopolymer interlocking bricks. Case Studies in Construction Materials, 8. pp. 401-408. ISSN 22145095

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the effect of crumb rubber and nano silica on the properties of high volume fly ash roller compacted concrete pavement using non-destructive techniques. Case Studies in Construction Materials, 8. pp. 380-391. ISSN 22145095

Mayoral, E. and Santos, A. and Gámez Vintaned, J.A. and Ledesma-Vazquez, J. and Baarli, B.G. and Cachão, M. and da Silva, C.M. and Johnson, M.E. (2018) Upper Pleistocene trace fossils from Ponta das Bicudas, Santiago, Cape Verde Islands: Systematics, taphonomy and palaeoenvironmetal evolution. Palaeogeography, Palaeoclimatology, Palaeoecology, 498. pp. 83-98. ISSN 00310182

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Akil, H.M. (2018) Ionic liquid pretreatment at high solids loading: A clean approach for fabrication of renewable resource based particulate composites. Polymer Composites, 39 (6). pp. 1994-2003. ISSN 02728397

Masri, A.N. and Abdul Mutalib, M.I. and Aminuddin, N.F. and Lévêque, J.-M. (2018) Novel SO3H-functionalized dicationic ionic liquids � A comparative study for esterification reaction by ultrasound cavitation and mechanical stirring for biodiesel production. Separation and Purification Technology, 196. pp. 106-114. ISSN 13835866

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2018) A study on carbon dioxide removal by blending the ionic liquid in membrane synthesis. Separation and Purification Technology, 196. pp. 20-26. ISSN 13835866

Matsumoto, Y. and Watada, J. (2018) Knowledge acquisition from rough sets using merged decision rules. Journal of Advanced Computational Intelligence and Intelligent Informatics, 22 (3). pp. 404-410. ISSN 13430130

Meyghani, B. and Awang, M.B. and Emamian, S. and Akinlabi, E.T. (2018) A comparison between temperature dependent and constant Young's modulus values in investigating the effect of the process parameters on thermal behaviour during friction stir welding: Vergleich zwischen den temperaturabhängigen und konstanten Elastizitätsmodulwerten in der Untersuchung der Prozessparameter auf die Wärmewirkung beim Rührreibschwei�en. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 427-434. ISSN 09335137

Musthafa, N.H. and Sulaiman, S. (2018) An investigation of the current practice to support upper limb rehabilitation among advanced stroke survivors. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1). pp. 280-285. ISSN 25024752

Mumtaz, W. and Vuong, P.L. and Malik, A.S. and Rashid, R.B.A. (2018) A review on EEG-based methods for screening and diagnosing alcohol use disorder. Cognitive Neurodynamics, 12 (2). pp. 141-156. ISSN 18714080

Manaf, N.A. and Saad, B. and Mohamed, M.H. and Wilson, L.D. and Latiff, A.A. (2018) Cyclodextrin based polymer sorbents for micro-solid phase extraction followed by liquid chromatography tandem mass spectrometry in determination of endogenous steroids. Journal of Chromatography A, 1543. pp. 23-33. ISSN 00219673

Muhammad, M.M. and Wan Yusof, K. and Ul Mustafa, M.R. and Zakaria, N.A. and Ab Ghani, A. (2018) Prediction models for flow resistance in flexible vegetated channels. International Journal of River Basin Management, 16 (4). pp. 427-437. ISSN 15715124

Murugiah, P.S. and Oh, P.C. and Lau, K.K. (2018) The performance of PPOdm-CNF Mixed Matrix Membrane for CO2/CH4 separation. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5086-5096. ISSN 22298649

Mubashir, M. and Fong, Y.Y. and Leng, C.T. and Keong, L.K. (2018) Enhanced gases separation of cellulose acetate membrane using N-Methyl-1-2 pyrrolidone as fabrication solvent. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 4978-4986. ISSN 22298649

Mahdi, F.P. and Vasant, P. and Abdullah-Al-Wadud, M. and Watada, J. and Kallimani, V. (2018) A quantum-inspired particle swarm optimization approach for environmental/economic power dispatch problem using cubic criterion function. International Transactions on Electrical Energy Systems, 28 (3). ISSN 20507038

Muddamsetty, S.M. and Sidibé, D. and Trémeau, A. and Mériaudeau, F. (2018) Salient objects detection in dynamic scenes using color and texture features. Multimedia Tools and Applications, 77 (5). pp. 5461-5474. ISSN 13807501

Momeni, M. and Hosseini, S.J. and Ridha, S. and Laruccia, M.B. and Liu, X. (2018) An optimum drill bit selection technique using artificial neural networks and genetic algorithms to increase the rate of penetration. Journal of Engineering Science and Technology, 13 (2). pp. 361-372. ISSN 18234690

Majeed, Z. and Mansor, N. and Ajab, Z. and Man, Z. and Sarwono, A. (2018) Kraft lignin ameliorates degradation resistance of starch in urea delivery biocomposites. Polymer Testing, 65. pp. 398-406. ISSN 01429418

Malakahmad, A. and Manan, T.S.B.A. and Sivapalan, S. and Khan, T. (2018) Genotoxicity assessment of raw and treated water samples using Allium cepa assay: evidence from Perak River, Malaysia. Environmental Science and Pollution Research, 25 (6). pp. 5421-5436. ISSN 09441344

Mohmmed, A.O. and Nasif, M.S. and Al-Kayiem, H.H. (2018) Experimental data for the slug two-phase flow characteristics in horizontal pipeline. Data in Brief, 16. pp. 527-530. ISSN 23523409

Murtaza, M. and Rahman, A.H.A. and Sum, C.W. and Konjing, Z. (2018) Facies associations, depositional environments and stratigraphic framework of the Early Miocene-Pleistocene successions of the Mukah-Balingian Area, Sarawak, Malaysia. Journal of Asian Earth Sciences, 152. pp. 23-38. ISSN 13679120

Mubashir, M. and Fong, Y.Y. and Leng, C.T. and Keong, L.K. (2018) Issues and Current Trends of Hollow-Fiber Mixed-Matrix Membranes for CO2 Separation from N2 and CH4. Chemical Engineering and Technology, 41 (2). pp. 235-252. ISSN 09307516

Mumtaz, W. and Ali, S.S.A. and Yasin, M.A.M. and Malik, A.S. (2018) A machine learning framework involving EEG-based functional connectivity to diagnose major depressive disorder (MDD). Medical and Biological Engineering and Computing, 56 (2). pp. 233-246. ISSN 01400118

Mohammed, B.S. and Adamu, M. (2018) Mechanical performance of roller compacted concrete pavement containing crumb rubber and nano silica. Construction and Building Materials, 159. pp. 234-251. ISSN 09500618

Mohammed, B.S. and Khed, V.C. and Nuruddin, M.F. (2018) Rubbercrete mixture optimization using response surface methodology. Journal of Cleaner Production, 171. pp. 1605-1621. ISSN 09596526

Memon, M.A. and Cheah, J.-H. and Ramayah, T. and Ting, H. and Chuah, F. (2018) Mediation analysis issues and recommendations. Journal of Applied Structural Equation Modeling, 2 (1). I-IX. ISSN 25904221

Mani, N. and Helfert, M. and Pahl, C. and Nimmagadda, S.L. and Vasant, P. (2018) Domain Model Definition for Domain-Specific Rule Generation Using Variability Model. EAI/Springer Innovations in Communication and Computing. pp. 39-55. ISSN 25228595

Mani, N. and Helfert, M. and Pahl, C. and Nimmagadda, S.L. and Vasant, P. (2018) Domain model definition for domain-specific rule generation using variability model. Studies in Computational Intelligence, 741. pp. 39-55. ISSN 1860949X

Majid, N.D.A. and Zaini, D. and Shariff, A.M. (2018) Managing employee participation based on OSHA's process safety management requirements. International Journal of Engineering and Technology(UAE), 7 (3). pp. 13-18. ISSN 2227524X

Malik, A.A. and Hasan, M.H. and Jasamai, M. (2018) A review on "Management by Exception" Surveillance for well management: To maximize Oil Production. International Journal of Engineering and Technology(UAE), 7 (3). pp. 90-95. ISSN 2227524X

Mushtaq, A. and Mukhtar, H. and Shariff, A.M. (2018) Synthesis and characterization of polymeric blend membranes enhanced by monoethanolamine for CO 2 /CH 4 separation. Bulgarian Chemical Communications, 50 (4). pp. 575-583. ISSN 08619808

Mushtaq, A. and Mukhtar, H. and Shariff, A.M. (2018) Effect of MEA on the performance of polysulfone/polyvinyl acetate blend membranes. Bulgarian Chemical Communications, 50 (4). pp. 584-591. ISSN 08619808

Memon, P.Q. and Yong, S.-P. and Pao, W. (2018) Surrogate reservoir model for average reservoir pressure. Lecture Notes in Networks and Systems, 15. pp. 737-746. ISSN 23673370

Mubashir, M. and Fong, Y.Y. and Leng, C.T. and Keong, L.K. (2018) Prediction of CO 2 permeability in NH 2 -MIL-53(Al)/cellulose acetate mixed matrix membranes using theoretical models. International Journal of Integrated Engineering, 10 (5). pp. 176-180. ISSN 2229838X

Masrom, S. and Khairuddin, N. and Abdul Rahman, A. and Azizan, A. and Rahman, A.S.A. (2018) An evaluation framework of trust aware recommender system. International Journal of Engineering and Technology(UAE), 7 (4). pp. 5-9. ISSN 2227524X

Mang, W.J. and Md Rafek, A.G. and Lai, G.T. (2018) Issues in engineering geological classification of weathered sedimentary rocks: Case study of Kati Formation, Parit, Perak. International Journal of Engineering and Technology(UAE), 7 (4). pp. 131-135. ISSN 2227524X

Moradi, B. and Ayoub, M. and Bataee, M. (2018) Sensitivity analysis of the parameters affecting temperature and pressure profiles along the wellbore. Petroleum and Coal, 60 (6). pp. 1291-1303. ISSN 13377027

Masyhur, E.M.H.B. and Rafek, A.G.A. and Noh, K.A.M. (2018) Behavior of seismic wave propagation with respect to fracture orientations in limestone, Perak, Malaysia. International Journal of Engineering and Technology(UAE), 7 (4). pp. 400-403. ISSN 2227524X

Muhaiyuddin, N.D.M. and Rambli, D.R.A. (2018) An interactive image-based virtual reality application for guided imagery therapy. Journal of Advanced Research in Dynamical and Control Systems, 10 (4 Spec). ISSN 1943023X

Mustaffa, Z. and Gelder, P.V. and Dawotola, A.W. and Yu, S.Y. and Kim, D.K. (2018) Reliability assessment for corroded pipelines in series considering length-scale effects. International Journal of Automotive and Mechanical Engineering, 15 (3). pp. 5607-5624. ISSN 22298649

Muhamad Nazri, N.I.A. and Awang Rambli, D.R. and Irshad, S. (2018) Exploratory study on multimodal information presentation for mobile ar application. Communications in Computer and Information Science, 886. pp. 358-369. ISSN 18650929

Mohammad Shuhaili, F. and Sulaiman, S. and Mahamad, S. and Sarlan, A. and Abro, A. (2018) An investigation on a suitable information structure of a museum environment for large display. Communications in Computer and Information Science, 886. pp. 302-312. ISSN 18650929

Mesgar, M. and Tafazoli, D. (2018) Online metacognitive reading strategies by internal and external locus of control. International Journal of Virtual and Personal Learning Environments, 8 (1). pp. 38-50. ISSN 19478518

Moayedfar, M. and Assadi, M.K. (2018) Various types of anti-reflective coatings (ARCS) Based on the layer composition and surface topography: A review. Reviews on Advanced Materials Science, 53 (2). pp. 187-205. ISSN 16065131

Mohmmed, A.O. and Nasif, M.S. and Al-Kayiem, H.H. (2018) Numerical investigation of slug characteristics in a horizontal air/water and air/oil pipe flow. Progress in Computational Fluid Dynamics, 18 (4). pp. 241-256. ISSN 14684349

Machmudah, A. and Parman, S. and Baharom, M.B. (2018) Continuous path planning of Kinematically redundant manipulator using Particle Swarm Optimization. International Journal of Advanced Computer Science and Applications, 9 (3). pp. 207-217. ISSN 2158107X

Muzammel, M. and Yusoff, M.Z. and Meriaudeau, F. (2018) Event-Related Potential Responses of Motorcyclists Towards Rear End Collision Warning System. IEEE Access, 6. pp. 31609-31620. ISSN 21693536

Moozarm Nia, P. and Abouzari-Lotf, E. and Arshad, A. and Nasef, M.M. and Ripin, A. (2018) Tunable electrochemical approach for reduction of graphene oxide: Taguchi-assisted chemical and structural optimization. Journal of the Electrochemical Society, 165 (9). E429-E438. ISSN 00134651

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. and Zainal, A.E.Z. and Firmansyah, F. (2018) Experimental investigation of ignition timing on the performance and emission characteristics of a crank-rocker engine. International Journal of Vehicle Structures and Systems, 10 (2). pp. 146-149. ISSN 09753060

Merican, A.M. and Abdulra'uf, M.Y. and Sulam, M. (2018) The representation of George Town Heritage: A two-space analysis of local alienation. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 137-152. ISSN 01287702

Muhammad, M.M. and Yusof, K.W. and Ul Mustafa, M.R. and Zakaria, N.A. and Ghani, A.Ab. (2018) Artificial neural network applications for predicting drag coefficient in flexible vegetated channels. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 99-102. ISSN 21801843

Mustapa, M.A. and Othman, W.A.F.W. and Abu Bakar, E. and Othman, A.R. (2018) Development of pole-like tree spiral climbing robot. Lecture Notes in Mechanical Engineering (978981). pp. 285-293. ISSN 21954356

Memon, M.A. and Salleh, R. and Nordin, S.M. and Cheah, J.-H. and Ting, H. and Chuah, F. (2018) Person-organisation fit and turnover intention: the mediating role of work engagement. Journal of Management Development, 37 (3). pp. 285-298. ISSN 02621711

Mohd Zabidi, N.A. and Tuan Sulong, T.S. and Ali, S. (2018) Synthesis and characterization of Cu/ZnO catalyst on carbon nanotubes and Al2O3 supports. Materials Science Forum, 916 MS. pp. 139-143. ISSN 02555476

Mahamad, S. and Sulaiman, S. and Sofian, N.M. (2018) Analyzing users' performance interacting with a digitized traditional game on multi-touch display using fitts's law. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-6). pp. 25-28. ISSN 21801843

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the static and dynamic modulus of elasticity of roller compacted rubbercrete using response surface methodology. International Journal of GEOMATE, 14 (41). pp. 186-192. ISSN 21862982

Murshid, G. and Ghaedi, H. and Ayoub, M. and Garg, S. and Ahmad, W. (2018) Experimental and correlation of viscosity and refractive index of non-aqueous system of diethanolamine (DEA) and dimethylformamide (DMF) for CO2 capture. Journal of Molecular Liquids, 250. pp. 162-170. ISSN 01677322

Mahdi, F.P. and Vasant, P. and Abdullah-Al-Wadud, M. and Watada, J. and Kallimani, V. (2018) Quantum-Behaved Bat Algorithm for Combined Economic Emission Dispatch Problem with Valve-Point Effect. Lecture Notes in Electrical Engineering, 465. pp. 923-933. ISSN 18761100

Mumtaz, W. and Saad, M.N.B.M. and Kamel, N. and Ali, S.S.A. and Malik, A.S. (2018) An EEG-based functional connectivity measure for automatic detection of alcohol use disorder. Artificial Intelligence in Medicine, 84. pp. 79-89. ISSN 09333657

Moniruzzaman, M. and Mahmood, H. and Goto, M. (2018) Ionic Liquid Based Nanocarriers for Topical and Transdermal Drug Delivery. RSC Smart Materials, 2018-J (28). pp. 390-403. ISSN 20460066

Mohammad Zubir, W.M.A. and Abdul Aziz, I. and Jaafar, J. and Hasan, M.H. (2018) Inference Algorithms in Latent Dirichlet Allocation for Semantic Classification. Advances in Intelligent Systems and Computing, 662. pp. 173-184. ISSN 21945357

Melo, H. and Zhang, H. and Vasant, P. and Watada, J. (2018) Training method for a feed forward neural network based on meta-heuristics. Smart Innovation, Systems and Technologies, 82. pp. 378-385. ISSN 21903018

Mahdi, F.P. and Vasant, P. and Kallimani, V. and Watada, J. and Fai, P.Y.S. and Abdullah-Al-Wadud, M. (2018) A holistic review on optimization strategies for combined economic emission dispatch problem. Renewable and Sustainable Energy Reviews, 81. pp. 3006-3020. ISSN 13640321

N

Nadeem, S. and Mumtaz, A. and Mumtaz, M. and Abdul Mutalib, M.I. and Shaharun, M.S. and Abdullah, B. (2018) Visible light driven CO2 reduction to methanol by Cu-porphyrin impregnated mesoporous Ti-MCM-48. Journal of Molecular Liquids, 272. pp. 656-667. ISSN 01677322

Nizamani, Z. and Mustaffa, Z. and Wen, L.L. (2018) Determination of extension of life of corroded offshore pipelines using form and Monte Carlo structural reliability. International Journal of Civil Engineering and Technology, 9 (13). pp. 1487-1499. ISSN 09766308

Naqvi, S.R. and Tariq, R. and Hameed, Z. and Ali, I. and Taqvi, S.A. and Naqvi, M. and Niazi, M.B.K. and Noor, T. and Farooq, W. (2018) Pyrolysis of high-ash sewage sludge: Thermo-kinetic study using TGA and artificial neural networks. Fuel, 233. pp. 529-538. ISSN 00162361

Nashed, O. and Partoon, B. and Lal, B. and Sabil, K.M. and Shariff, A.M. (2018) Review the impact of nanoparticles on the thermodynamics and kinetics of gas hydrate formation. Journal of Natural Gas Science and Engineering, 55. pp. 452-465. ISSN 18755100

Naffouti, S.E. and Fougerolle, Y. and Aouissaoui, I. and Sakly, A. and Mériaudeau, F. (2018) Heuristic optimization-based wave kernel descriptor for deformable 3D shape matching and retrieval. Signal, Image and Video Processing, 12 (5). pp. 915-923. ISSN 18631703

Ng, Q.H. and Chin, B.L.F. and Yusup, S. and Loy, A.C.M. and Chong, K.Y.Y. (2018) Modeling of the co-pyrolysis of rubber residual and HDPE waste using the distributed activation energy model (DAEM). Applied Thermal Engineering, 138. pp. 336-345. ISSN 13594311

Nikbakht, E. and Rashid, K. (2018) Investigation on seismic performance and functionality of self-centring post-tensioned segmental columns. Structure and Infrastructure Engineering, 14 (6). pp. 730-742. ISSN 15732479

Noor, S.N.M. and Lim, J.W. and Lam, M.K. and Uemura, Y. and Chew, T.L. and Ho, Y.C. and Mohamad, M. (2018) Lipid and protein from black soldier fly larvae fed with self- fermented coconut waste medium. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 88-95. ISSN 22897879

Nizam, N.F.I.A. and Sallih, N. and Puspitasari, D. and Ginta, T.L. and Mustapha, M. (2018) The influence of substrate surface energy on the adhesion compatibility of epoxy adhesive using molecular simulation tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2786-2792. ISSN 18196608

Nasir, R. and Ahmad, N.N.R. and Mukhtar, H. and Mohshim, D.F. (2018) Effect of ionic liquid inclusion and amino-functionalized SAPO-34 on the performance of mixed matrix membranes for CO2/CH4 separation. Journal of Environmental Chemical Engineering, 6 (2). pp. 2363-2368. ISSN 22133437

Nazir, M.S. and Ajab, H. and Raza, M.R. and Abdullah, M.A. (2018) Surface modification of cellulose fibers from oil palm empty fruit bunches for heavy metal ion sorption and diesel desulphurization. Desalination and Water Treatment, 107. pp. 241-256. ISSN 19443994

Ngui, J.Q. and Hermana, M. and Ghosh, D.P. and Yusoff, W.I.W. (2018) Integrated study of lithofacies identification�a case study in X field, Sabah, Malaysia. Geosciences (Switzerland), 8 (2). ISSN 20763263

Nasrullah, A. and Bhat, A.H. and Naeem, A. and Isa, M.H. and Danish, M. (2018) High surface area mesoporous activated carbon-alginate beads for efficient removal of methylene blue. International Journal of Biological Macromolecules, 107. pp. 1792-1799. ISSN 01418130

Nashed, O. and Sabil, K.M. and Ismail, L. and Japper-Jaafar, A. and Lal, B. (2018) Mean induction time and isothermal kinetic analysis of methane hydrate formation in water and imidazolium based ionic liquid solutions. Journal of Chemical Thermodynamics, 117. pp. 147-154. ISSN 00219614

Nedaei, M. and Ataei, A. and Adaramola, M.S. and Mirzahosseini, A.H. and Khalaji Assadi, M. and Assareh, E. (2018) Comparative analysis of three numerical methods for estimating the onshore wind power in a coastal area. International Journal of Ambient Energy, 39 (1). pp. 58-72. ISSN 01430750

Noh, N.F.M. and Sulaiman, S. and Noor, A.M. and Kit, J.L.O.W. (2018) A preliminary study on the effect of audio feedback to support comprehension of web content among non-visual internet users. Lecture Notes on Data Engineering and Communications Technologies, 5. pp. 335-342. ISSN 23674512

Nasir, N. and Abd Aziz, M.I. and Hamzah, A.S.A. (2018) Stability analysis of palm oil control model with felling effect. Compusoft, 7 (11). pp. 2916-2920. ISSN 23200790

Nawi, N.I.M. and Bilad, M.R. and Nordin, N.A.H.M. and Mavukkandy, M.O. and Putra, Z.A. and Wirzal, M.D.H. and Jaafar, J. and Khan, A.L. (2018) Exploiting the interplay between liquid-liquid demixing and crystallization of the PVDF membrane for membrane distillation. International Journal of Polymer Science, 2018. ISSN 16879422

Noorasikin, M.M. and Maisarah, A. and Khairul Akmaliah, A. and Mashitoh, Y. (2018) Consumer perceived value in sustaining recycling behaviour. Malaysian Journal of Consumer and Family Economics, 21. pp. 50-64. ISSN 15112802

Nordin, N.A.H.M. and Ismail, A.F. and Racha, S.M. and Cheer, N.B. and Bilad, M.R. and Putra, Z.A. and Wirzal, M.D.H. (2018) Limitation in fabricating PSf/ZIF-8 hollow fiber membrane for CO2/CH4 separation. Indonesian Journal of Science and Technology, 3 (2). pp. 138-149. ISSN 25281410

Naz, M.Y. and Sulaiman, S.A. and Khan, Y. and Ghaffar, A. and Jamil, Y. and Ahmad, I. (2018) Study of particle dynamics in a swirling fluidized bed by using a mesh-type air distributor. Journal of Porous Media, 21 (11). pp. 1059-1068. ISSN 1091028X

Negash, B.M. and Vasant, P.M. and Jufar, S.R. (2018) Application of artificial neural networks for calibration of a reservoir model. Intelligent Decision Technologies, 12 (1). pp. 67-79. ISSN 18724981

Noureen, S. and Noreen, S. and Ghumman, S.A. and Batool, F. and Arshad, M. and Noreen, F. and Ishtiaq, U. and Bukhari, S.N. (2018) Seeds of giant dodder (Cuscuta reflexa) as a function of extract procedure and solvent nature. Notulae Botanicae Horti Agrobotanici Cluj-Napoca, 46 (2). pp. 653-662. ISSN 0255965X

Nurika, O. and Hassan, M.F. and Zakaria, N. and Jung, L.T. (2018) A study of fluctuations and confidence of implementation in genetic algorithm optimized network in data centre. Intelligent Decision Technologies, 12 (1). pp. 25-37. ISSN 18724981

Nasir, A.M. and Md Nordin, N.A.H. and Goh, P.S. and Ismail, A.F. (2018) Application of two-dimensional leaf-shaped zeolitic imidazolate framework (2D ZIF-L) as arsenite adsorbent: Kinetic, isotherm and mechanism. Journal of Molecular Liquids, 250. pp. 269-277. ISSN 01677322

Nashed, O. and Dadebayev, D. and Khan, M.S. and Bavoh, C.B. and Lal, B. and Shariff, A.M. (2018) Experimental and modelling studies on thermodynamic methane hydrate inhibition in the presence of ionic liquids. Journal of Molecular Liquids, 249. pp. 886-891. ISSN 01677322

Nazif, A. and Mohammed, N.I. and Malakahmad, A. and Abualqumboz, M.S. (2018) Regression and multivariate models for predicting particulate matter concentration level. Environmental Science and Pollution Research, 25 (1). pp. 283-289. ISSN 09441344

Naqvi, S.R. and Jamshaid, S. and Naqvi, M. and Farooq, W. and Niazi, M.B.K. and Aman, Z. and Zubair, M. and Ali, M. and Shahbaz, M. and Inayat, A. and Afzal, W. (2018) Potential of biomass for bioenergy in Pakistan based on present case and future perspectives. Renewable and Sustainable Energy Reviews, 81. pp. 1247-1258. ISSN 13640321

O

Ong, C.C. and Sundera Murthe, S. and Mohamed, N.M. and Perumal, V. and Mohamed Saheed, M.S. (2018) Nanoscaled Surface Modification of Poly(dimethylsiloxane) Using Carbon Nanotubes for Enhanced Oil and Organic Solvent Absorption. ACS Omega, 3 (11). pp. 15907-15915. ISSN 24701343

Oh, W.-D. and Lisak, G. and Webster, R.D. and Liang, Y.-N. and Veksha, A. and Giannis, A. and Moo, J.G.S. and Lim, J.-W. and Lim, T.-T. (2018) Insights into the thermolytic transformation of lignocellulosic biomass waste to redox-active carbocatalyst: Durability of surface active sites. Applied Catalysis B: Environmental, 233. pp. 120-129. ISSN 09263373

Ong, C.C. and Gopinath, S.C.B. and Rebecca, L.W.X. and Perumal, V. and Lakshmipriya, T. and Saheed, M.S.M. (2018) Diagnosing human blood clotting deficiency. International Journal of Biological Macromolecules, 116. pp. 765-773. ISSN 01418130

Ooi, J.-O. and Hussin, F.A. and Zakaria, M.N. (2018) Fine-grained overhead characterisation of cross-ISA DBTO for multicore processor. Indonesian Journal of Electrical Engineering and Computer Science, 10 (3). pp. 1036-1044. ISSN 25024752

Omar, N. and Al-Tashi, Q. (2018) Arabic nested noun compound extraction based on linguistic features and statistical measures. GEMA Online Journal of Language Studies, 18 (2). pp. 93-107. ISSN 16758021

Oumer, A.N. and Hasan, M.M. and Baheta, A.T. and Mamat, R. and Abdullah, A.A. (2018) Bio-based liquid fuels as a source of renewable energy: A review. Renewable and Sustainable Energy Reviews, 88. pp. 82-98. ISSN 13640321

Osman, A.B. and Ovinis, M. and Faye, I. and Hashim, F.M. and Osei, H. (2018) An optical flow measurement technique based on continuous wavelet transform. Journal of Applied Fluid Mechanics, 11 (3). pp. 695-707. ISSN 17353572

Othman, A.R. and Hassan, M.H. and Abu Bakar, E. and Othman, W.A.F.W. (2018) Statistical analysis of the machining parameters in drilling of carbon fibre reinforced plastics (CFRP) composite with various drill types. Lecture Notes in Mechanical Engineering (978981). pp. 141-154. ISSN 21954356

Osman, A. and Mohd Razali, R. and Nurdin, N. (2018) Powertrain Warm-Up Optimization Involving Simplified Split Cooling with Integrated Exhaust Heat Recovery and Reuse. SAE Technical Papers, 2018-A. ISSN 01487191

Osman, A.B. and Ovinis, M. and Faye, I. and Hashim, F.M. (2018) Image-Based Technique for Turbulent Flow Segmentation. Lecture Notes in Electrical Engineering, 488. pp. 119-129. ISSN 18761100

P

Putra, N.R. and Idham, Z.B. and Machmudah, S. and Ruslan, M.S.H.B. and Che Yunus, M.A. (2018) Extraction of peanut skin oil by modified supercritical carbon dioxide: Empirical modelling and optimization. Separation Science and Technology (Philadelphia), 53 (17). pp. 2695-2703. ISSN 01496395

Porwal, P. and Pachade, S. and Kokare, M. and Giancardo, L. and Mériaudeau, F. (2018) Retinal image analysis for disease screening through local tetra patterns. Computers in Biology and Medicine, 102. pp. 200-210. ISSN 00104825

Puspitasari, W.C. and Ahmad, F. and Ullah, S. and Rafi Raza, M. and Hussain, P. and Yusoff, P.S.M. and Azmi, Y. (2018) The study of corrosion behaviour of intumescent fire retardant coating with structural steel substrate. International Journal of Electrochemical Science, 13 (10). pp. 9916-9930. ISSN 14523981

Partoon, B. and Sabil, K.M. and Lau, K.K. and Lal, B. and Nasrifar, K. (2018) Production of gas hydrate in a semi-batch spray reactor process as a means for separation of carbon dioxide from methane. Chemical Engineering Research and Design, 138. pp. 168-175. ISSN 02638762

Perumal, V. and Saheed, M.S.M. and Mohamed, N.M. and Saheed, M.S.M. and Murthe, S.S. and Gopinath, S.C.B. and Chiu, J.-M. (2018) Gold nanorod embedded novel 3D graphene nanocomposite for selective bio-capture in rapid detection of Mycobacterium tuberculosis. Biosensors and Bioelectronics, 116. pp. 116-122. ISSN 09565663

Porwal, P. and Pachade, S. and Kamble, R. and Kokare, M. and Deshmukh, G. and Sahasrabuddhe, V. and Meriaudeau, F. (2018) Indian diabetic retinopathy image dataset (IDRiD): A database for diabetic retinopathy screening research. Data, 3 (3). ISSN 23065729

Patidar, K. and Roy, R. and Kumar, S. and Nirmala, G. and Murugesan, T. (2018) Experimental investigation of sterculia foetida and moringa oleifera as a coagulant for water and wastewater treatment. Desalination and Water Treatment, 122. pp. 254-259. ISSN 19443994

Putra, N.R. and Rizkiyah, D.N. and Zaini, A.S. and Yunus, M.A.C. and Machmudah, S. and Idham, Z.B. and Hazwan Ruslan, M.S. (2018) Effect of particle size on yield extract and antioxidant activity of peanut skin using modified supercritical carbon dioxide and soxhlet extraction. Journal of Food Processing and Preservation, 42 (8). ISSN 01458892

Pham, L.H.H.P. and Rusli, R. and Laziz, A.M. (2018) Numerical analysis of initial CO2 bubbles leaked in seawater from ocean CO2 storage using volume of fluid method. International Journal of Automotive and Mechanical Engineering, 15 (2). p. 5389. ISSN 22298649

Putra, N.R. and Yunus, M.A.C. and Ruslan, M.S.H. and Idham, Z. and Idrus, F.N. (2018) Comparison extraction of peanut skin between CO2 supercritical fluid extraction and soxhlet extraction in term of oil yield and catechin. Pertanika Journal of Science and Technology, 26 (2). pp. 799-810. ISSN 01287680

Pratama, E. and Ismail, M.S. and Ridha, S. (2018) Identification of coal seams suitability for carbon dioxide sequestration with enhanced coalbed methane recovery: a case study in South Sumatera Basin, Indonesia. Clean Technologies and Environmental Policy, 20 (3). pp. 581-587. ISSN 1618954X

Puspitasari, D. and Ginta, T.L. and Mustapha, M. and Sallih, N. and Puspitasari, P. (2018) Statistical optimization of stress relieving parameters on closed cell aluminium foam using central composite design. Archives of Materials Science and Engineering, 89 (2). pp. 55-63. ISSN 18972764

Permanasari, A.E. and Rambli, D.R.A. and Dominic, P.D.D. (2018) User interface design for a zoonosis prediction system. Journal of Engineering Science and Technology, 13 (2). pp. 347-360. ISSN 18234690

Prakash, C. and Singh, S. and Singh, M. and Antil, P. and Aliyu, A.A.A. and Abdul-Rani, A.M. and Sidhu, S.S. (2018) Multi-objective Optimization of MWCNT Mixed Electric Discharge Machining of Al�30SiCp MMC Using Particle Swarm Optimization. Materials Horizons: From Nature to Nanomaterials. pp. 145-164. ISSN 25245384

Puspitasari, D. and Ginta, T.L. and Puspitasari, P. and Mustapha, M. (2018) The effect of thermal processing parameters on the mechanical properties of aluminium alloy foam. Journal of Achievements in Materials and Manufacturing Engineering, 91 (1). pp. 12-17. ISSN 17348412

Putra, Z.A. (2018) Lignocellulosic biomass pretreatment for biorefinery: A review. Indonesian Journal of Science and Technology, 3 (1). pp. 75-81. ISSN 25281410

Perdomo, O. and Andrearczyk, V. and Meriaudeau, F. and Müller, H. and González, F.A. (2018) Glaucoma Diagnosis from Eye Fundus Images Based on Deep Morphometric Feature Estimation. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 11039 . pp. 319-327. ISSN 03029743

Puspitasari, P. and Fauzan, R. and Ginta, T.L. and Mustapha, M. and Puspitasari, D. (2018) Morphology of aluminium with nickel addition on sand casting process. Journal of Achievements in Materials and Manufacturing Engineering, 87 (1). pp. 13-17. ISSN 17348412

Pan, J.-S. and Tsai, P.-W. and Watada, J. and Jain, L.C. (2018) Preface. Smart Innovation, Systems and Technologies, 81. v-vi. ISSN 21903018

Pan, J.-S. and Tsai, P.-W. and Watada, J. and Jain, L.C. (2018) Preface. Smart Innovation, Systems and Technologies, 82. v-vi. ISSN 21903018

Q

Qadar Chaudhary, G. and Ali, M. and Sheikh, N.A. and Gilani, S.I.U.H. and Khushnood, S. (2018) Integration of solar assisted solid desiccant cooling system with efficient evaporative cooling technique for separate load handling. Applied Thermal Engineering, 140. pp. 696-706. ISSN 13594311

Qi, C.L. and Wee, S.C. and Maulianda, B. and Barati, R. and Zafri bin Bahruddin, A. and Padmanabhan, E. (2018) Determination of solvation free energy of carbon dioxide (CO2) in the mixture of brine, Alfa Olefin Sulfonate (AOS) and CH4 after foam fracturing in the shale reservoirs on enhanced shale gas recovery (ESGR). Journal of Natural Gas Science and Engineering, 54. pp. 102-109. ISSN 18755100

Qayyum, A. and Saad, N.M. and Kamel, N. and Malik, A.S. (2018) Deep convolutional neural network processing of aerial stereo imagery to monitor vulnerable zones near power lines. Journal of Applied Remote Sensing, 12 (1). ISSN 19313195

Qadrouh, A.N. and Carcione, J.M. and Ba, J. and Gei, D. and Salim, A.M. (2018) Backus and Wyllie Averages for Seismic Attenuation. Pure and Applied Geophysics, 175 (1). pp. 165-170. ISSN 00334553

R

Rahim Risal, A. and Manan, M.A. and Yekeen, N. and Mohamed Samin, A. and Azli, N.B. (2018) Rheological properties of surface-modified nanoparticles-stabilized CO2 foam. Journal of Dispersion Science and Technology, 39 (12). pp. 1767-1779. ISSN 01932691

Rahim, K.N.K.A. and Elamvazuthi, I. and Izhar, L.I. and Capi, G. (2018) Classification of human daily activities using ensemble methods based on smartphone inertial sensors. Sensors (Switzerland), 18 (12). ISSN 14248220

Rabih, A.A.S. and Dennis, J.O. and Ahmed, A.Y. and Md Khir, M.H. and Ahmed, M.G.A. and Idris, A. and Mian, M.U. (2018) MEMS-Based Acetone Vapor Sensor for Non-Invasive Screening of Diabetes. IEEE Sensors Journal, 18 (23). pp. 9486-9500. ISSN 1530437X

Rehman, T.-U. and Ali, H.M. and Saieed, A. and Pao, W. and Ali, M. (2018) Copper foam/PCMs based heat sinks: An experimental study for electronic cooling systems. International Journal of Heat and Mass Transfer, 127. pp. 381-393. ISSN 00179310

Rehman, S. and Ali, S.S. and Khan, S.A. (2018) Wind Farm Layout Design Using Cuckoo Search Algorithms. Applied Artificial Intelligence, 32 (9-10). pp. 956-978. ISSN 08839514

Ridha, S. and Hamid, A.I.A. and Setiawan, R.A. and Ibrahim, M.A. and Shahari, A.R. (2018) Microstructure Behavior of Fly Ash-Based Geopolymer Cement Exposed to Acidic Environment for Oil Well Cementing. Arabian Journal for Science and Engineering, 43 (11). pp. 6413-6428. ISSN 2193567X

Ragunathan, T. and Xu, X. and Wood, C.D. (2018) Gas phase dehydration using hydrogels. Journal of Natural Gas Science and Engineering, 59. pp. 1-8. ISSN 18755100

Rezk, M.G. and Foroozesh, J. (2018) Determination of mass transfer parameters and swelling factor of CO2-oil systems at high pressures. International Journal of Heat and Mass Transfer, 126. pp. 380-390. ISSN 00179310

Ragunathan, R. and Drieberg, M. and Aziz, A.A. and Sebastian, P. (2018) Modelling of indoor light energy harvesting for IoT. International Journal of Simulation: Systems, Science and Technology, 19 (5). 3.1-3.5. ISSN 14738031

Rouhi, J. and Malayeri, H.K. and Kakooei, S. and Karimzadeh, R. and Alrokayan, S. and Khan, H. and Mahmood, M.R. (2018) Three separated growth sequences of vertically-aligned carbon nanotubes on porous silicon: Field emission applications. International Journal of Electrochemical Science, 13 (10). pp. 9742-9748. ISSN 14523981

Ridha, S. and Abd Hamid, A.I. and Setiawan, R.A. and Shahari, A.R. (2018) Influence of sulfuric and hydrochloric acid on the resistance of geopolymer cement with nano-silica additive for oil well cement application. International Journal of Structural Integrity, 9 (5). pp. 616-624. ISSN 17579864

Rozi, F. and Mohebbi, H. and Ismail, M.C. and Kakooei, S. and Ahmadi, M. and Aghasadeghi, A. and Aghasadeghi, A. (2018) Laboratory investigation on the condensation and corrosion rates of top of line corrosion in carbon steel: a case study from pipeline transporting wet gas in elevated temperature. Corrosion Engineering Science and Technology, 53 (6). pp. 444-448. ISSN 1478422X

Rehan, M. and Hasbullah, H. and Faye, I. and Rehan, W. and Chughtai, O. and Rehmani, M.H. (2018) ZGLS: a novel flat quorum-based and reliable location management protocol for VANETs. Wireless Networks, 24 (6). pp. 1885-1903. ISSN 10220038

Rahmanian, N. and Aqar, D.Y. and Bin Dainure, M.F. and Mujtaba, I.M. (2018) Process simulation and assessment of crude oil stabilization unit. Asia-Pacific Journal of Chemical Engineering, 13 (4). ISSN 19322135

Rahim, N.F. and Othman, M. and Sokkalingam, R. and Abdul Kadir, E. (2018) Forecasting Crude Palm Oil Prices Using Fuzzy Rule-Based Time Series Method. IEEE Access, 6. pp. 32216-32224. ISSN 21693536

Ruslan, M.S.H. and Idham, Z. and Zaini, M.A.A. and Yian, L.Y. and Yunus, M.A.C. (2018) Kinetic modeling of supercritical fluid extraction of betel nut. International Journal of Automotive and Mechanical Engineering, 15 (2). pp. 5273-5284. ISSN 22298649

Rodríguez-Aguilar, R. and Marmolejo-Saucedo, J.A. and Vasant, P. (2018) Evaluation of inequality and technical efficiency of federal health financing for population without social security per Federal Entity, 2004�2012 in México. Journal of Ambient Intelligence and Humanized Computing, 9 (3). pp. 771-788. ISSN 18685137

Rashid, T. and Gnanasundaram, N. and Appusamy, A. and Kait, C.F. and Thanabalan, M. (2018) Enhanced lignin extraction from different species of oil palm biomass: Kinetics and optimization of extraction conditions. Industrial Crops and Products, 116. pp. 122-136. ISSN 09266690

Ramli, N.H. and Yusup, S. and Kueh, B.W.B. and Kamarulzaman, P.S.D. and Osman, N. and Abd. Rahim, M. and Aziz, R. and Mokhtar, S. and Ahmad, A.B. (2018) Effectiveness of biopesticides against brown planthopper (Nilaparvata lugens) in paddy cultivation. Sustainable Chemistry and Pharmacy, 8. pp. 16-20. ISSN 23525541

Ramanathan, S. and Gopinath, S.C.B. and Anbu, P. and Lakshmipriya, T. and Kasim, F.H. and Lee, C.-G. (2018) Eco-friendly synthesis of Solanum trilobatum extract-capped silver nanoparticles is compatible with good antimicrobial activities. Journal of Molecular Structure, 1160. pp. 80-91. ISSN 00222860

Raj, J.J. and Magaret, S. and Pranesh, M. and Lethesh, K.C. and Devi, W.C. and Mutalib, M.I.A. (2018) Extractive desulfurization of model fuel oil using ester functionalized imidazolium ionic liquids. Separation and Purification Technology, 196. pp. 115-123. ISSN 13835866

Raja Shahrom, M.S. and Wilfred, C.D. and Chong, F.K. (2018) Thermodynamic and kinetic studies on CO2 capture with PolyVBTMAArg. Journal of Physics and Chemistry of Solids, 116. pp. 22-29. ISSN 00223697

Ridha, S. and Setiawan, R.A. and Hamid, A.I.A. and Shahari, A.R. (2018) The influence of CO2 accelerated carbonation on alkali-activated fly ash cement under elevated temperature and pressure: Einfluss von CO2 beschleunigter Karbonisierung auf alkalisch aktivierten Flugaschezement unter erhöhter Temperatur und erhöhtem Druck. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 483-488. ISSN 09335137

Rashid, Z. and Wilfred, C.D. and Gnanasundaram, N. and Arunagiri, A. and Murugesan, T. (2018) Screening of ionic liquids as green oilfield solvents for the potential removal of asphaltene from simulated oil: COSMO-RS model approach. Journal of Molecular Liquids, 255. pp. 492-503. ISSN 01677322

Ruslan, M.S.H. and Idham, Z. and Nian Yian, L. and Ahmad Zaini, M.A. and Che Yunus, M.A. (2018) Effect of operating conditions on catechin extraction from betel nuts using supercritical CO2-methanol extraction. Separation Science and Technology (Philadelphia), 53 (4). pp. 662-670. ISSN 01496395

Ramli@Yusof, N.H. and Yusup, S. and Kueh, B.W.B. and Kamarulzaman, P.S.D. and Osman, N. and Abd. Rahim, M. and Aziz, R. and Mokhtar, S. and Ahmad, A.B. (2018) Effectiveness of biopesticides in enhancing paddy growth for yield improvement. Sustainable Chemistry and Pharmacy, 7. pp. 1-8. ISSN 23525541

Rashid A.S.A., Sr. and Kueh, A.B.H. and Mohamad, H. (2018) Behaviour of soft soil improved by floating soil-cement columns. International Journal of Physical Modelling in Geotechnics, 18 (2). pp. 95-116. ISSN 1346213X

Ramkumar, M. and Santosh, M. and Nagarajan, R. and Li, S.S. and Mathew, M. and Menier, D. and Siddiqui, N. and Rai, J. and Sharma, A. and Farroqui, S. and Poppelreiter, M.C. and Lai, J. and Prasad, V. (2018) Late Middle Miocene volcanism in Northwest Borneo, Southeast Asia: Implications for tectonics, paleoclimate and stratigraphic marker. Palaeogeography, Palaeoclimatology, Palaeoecology, 490. pp. 141-162. ISSN 00310182

Ramlee, N.N.E.N. and Yatin, S.F.M. and Zali, M.M. and Zain, N.A.M. and Bakar, A.A. and Saman, W.S.W.M. and Yaacob, R.A.I.R. (2018) The requirement of records management practices for institutional audits. International Journal of Engineering and Technology(UAE), 7 (3.7 Sp). pp. 228-231. ISSN 2227524X

Rosli, R. and Poppelreiter, M.C. and Jamaludin, S.N.F. (2018) A review of stratigraphic foward models (SFM) for carbonate platform. International Journal of Engineering and Technology(UAE), 7 (4). pp. 143-147. ISSN 2227524X

Rais, H.M. and Mehmood, T. (2018) Dynamic Ant Colony System with Three Level Update Feature Selection for Intrusion Detection. International Journal of Network Security, 20 (1). pp. 184-192. ISSN 1816353X

Ridha, S. and Abd Hamid, A.I. and Che Ku Mazuan, C.K.A.H. (2018) Influence of different brine water salinity on mechanical properties of fly ash-based geopolymer cement. International Journal of Structural Integrity, 9 (2). pp. 142-152. ISSN 17579864

Renganathan, S. and Kral, I. (2018) Comparative analysis of language and education policies for indigenous minorities in Australia and Malaysia. International Journal of Multicultural Education, 20 (1). pp. 1-19. ISSN 19345267

Rahman, N.A.A. and Mohammad, M.F. and Rahim, S.A. and Hassan, R. and Ahmad, M.F. and Kadir, S.A. (2018) Shipper's perceptions of aviation Logistics Service Quality (LSQ) of air freight provider. Journal of Engineering and Applied Sciences, 13 (1). pp. 1-6. ISSN 1816949X

Riahi, A. and Wan Yusof, K. and Isa, M.H. and Singh Mahinder Singh, B. and Mustaffa, Z. and Ahsan, A. and Ul Mustafa, M.R. and Sapari, N. and Zahari, N.A.M. (2018) Potable water production using two solar stills having different cover materials and fabrication costs. Environmental Progress and Sustainable Energy, 37 (1). pp. 584-596. ISSN 19447442

S

Sabet, M. and Soleimani, H. (2018) Thermal, electrical and characterization effects of graphene on the properties of low-density polyethylene composites. International Journal of Plastics Technology, 22 (2). pp. 234-246. ISSN 0972656X

Shah, S.M.H. and Mustaffa, Z. and Yusof, K.W. and Nor, M.F.M. (2018) Influence of forces on vehicle's instability in floodwaters. Ain Shams Engineering Journal, 9 (4). pp. 3245-3258. ISSN 20904479

Sedighi, M. and Aljlil, S.A. and Alsubei, M.D. and Ghasemi, M. and Mohammadi, M. (2018) Performance optimisation of microbial fuel cell for wastewater treatment and sustainable clean energy generation using response surface methodology. Alexandria Engineering Journal, 57 (4). pp. 4243-4253. ISSN 11100168

Shehzad, N. and Tahir, M. and Johari, K. and Murugesan, T. and Hussain, M. (2018) Improved interfacial bonding of graphene-TiO2 with enhanced photocatalytic reduction of CO2 into solar fuel. Journal of Environmental Chemical Engineering, 6 (6). pp. 6947-6957. ISSN 22133437

Sazali, N. and W. Salleh, W.N. and Ismail, A.F. and Ismail, N.H. and Mohamed, M.A. and M. Nordin, N.A.H. and M. Sokri, M.N.M. and Iwamoto, Y. and Honda, S. (2018) Enhanced gas separation performance using carbon membranes containing nanocrystalline cellulose and BTDA-TDI/MDI polyimide. Chemical Engineering Research and Design, 140. pp. 221-228. ISSN 02638762

Sardar, S. and Wilfred, C.D. and Mumtaz, A. and Rashid, Z. and Leveque, J.-M. (2018) Synthesis, thermophysical properties, Hammett acidity and COSMO-RS study of camphorsulfonate-based Brönsted acidic ionic liquids. Journal of Molecular Liquids, 271. pp. 621-630. ISSN 01677322

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. and Irfan, M. (2018) Unsupervised on-line method to diagnose unbalanced voltage in three-phase induction motor. Neural Computing and Applications, 30 (12). pp. 3877-3892. ISSN 09410643

Sambo, C. and Yin, Y. and Djuraev, U. and Ghosh, D. (2018) Application of Adaptive Neuro-Fuzzy Inference System and Optimization Algorithms for Predicting Methane Gas Viscosity at High Pressures and High temperatures Conditions. Arabian Journal for Science and Engineering, 43 (11). pp. 6627-6638. ISSN 2193567X

Sardar, S. and Wilfred, C.D. and Mumtaz, A. and Leveque, J.-M. and Khan, A.S. and Krishnan, S. (2018) Physicochemical properties, Brönsted acidity and ecotoxicity of imidazolium-based organic salts: Non-toxic variants of protic ionic liquids. Journal of Molecular Liquids, 269. pp. 178-186. ISSN 01677322

Saieed, A. and Pao, W. and Hewakandamby, B. and Azzopardi, B.J. and Wood, D.A. and Ali, H.M. (2018) Experimental investigation on the effect of diameter ratio on two-phase slug flow separation in a T-Junction. Journal of Petroleum Science and Engineering, 170. pp. 139-150. ISSN 09204105

Shafiq, N. and Choo, C.S. and Isa, M.H. (2018) Effects of used engine oil on slump, compressive strength and oxygen permeability of normal and blended cement concrete. Construction and Building Materials, 187. pp. 178-184. ISSN 09500618

Said, R. and Abdul Rahim, A.A. and Hassan, R. (2018) Exploring the effects of corporate governance and human governance on management commentary disclosure. Social Responsibility Journal, 14 (4). pp. 843-858. ISSN 17471117

Sarang, S. and Drieberg, M. and Awang, A. and Ahmad, R. (2018) A QoS MAC protocol for prioritized data in energy harvesting wireless sensor networks. Computer Networks, 144. pp. 141-153. ISSN 13891286

Siyal, A.A. and Shamsuddin, M.R. and Khan, M.I. and Rabat, N.E. and Zulfiqar, M. and Man, Z. and Siame, J. and Azizli, K.A. (2018) A review on geopolymers as emerging materials for the adsorption of heavy metals and dyes. Journal of Environmental Management, 224. pp. 327-339. ISSN 03014797

Samsudin, M.F.R. and Sufian, S. and Hameed, B.H. (2018) Epigrammatic progress and perspective on the photocatalytic properties of BiVO4-based photocatalyst in photocatalytic water treatment technology: A review. Journal of Molecular Liquids, 268. pp. 438-459. ISSN 01677322

Samsudin, M.F.R. and Mahmood, A. and Sufian, S. (2018) Enhanced photocatalytic degradation of wastewater over RGO-TiO2/BiVO4 photocatalyst under solar light irradiation. Journal of Molecular Liquids, 268. pp. 26-36. ISSN 01677322

Syed Muhammad, A.F. and Awad, A. and Saidur, R. and Masiran, N. and Salam, A. and Abdullah, B. (2018) Recent advances in cleaner hydrogen productions via thermo-catalytic decomposition of methane: Admixture with hydrocarbon. International Journal of Hydrogen Energy, 43 (41). pp. 18713-18734. ISSN 03603199

Shamshirgaran, S.R. and Khalaji Assadi, M. and Badescu, V. and Al-Kayiem, H.H. (2018) Upper limits for the work extraction by nanofluid-filled selective flat-plate solar collectors. Energy, 160. pp. 875-885. ISSN 03605442

Saieed, A. and Pao, W. and Ali, H.M. (2018) Prediction of phase separation in a T-Junction. Experimental Thermal and Fluid Science, 97. pp. 160-179. ISSN 08941777

Sulaiman, S.A. and Roslan, R. and Inayat, M. and Yasin Naz, M. (2018) Effect of blending ratio and catalyst loading on co-gasification of wood chips and coconut waste. Journal of the Energy Institute, 91 (5). pp. 779-785. ISSN 17439671

Shah, M.U.H. and Sivapragasam, M. and Moniruzzaman, M. and Talukder, M.M.R. and Yusup, S.B. and Goto, M. (2018) Aggregation behavior and antimicrobial activity of a micellar system of binary ionic liquids. Journal of Molecular Liquids, 266. pp. 568-576. ISSN 01677322

Safdar, R. and Omar, A.A. and Lal, B. (2018) Performance of aqueous tetrabutylammonium hydroxide, piperazine and their blends for carbon dioxide capture. Journal of Molecular Liquids, 266. pp. 522-528. ISSN 01677322

Singh, S. and Bahari, M.B. and Abdullah, B. and Phuong, P.T.T. and Truong, Q.D. and Vo, D.-V.N. and Adesina, A.A. (2018) Bi-reforming of methane on Ni/SBA-15 catalyst for syngas production: Influence of feed composition. International Journal of Hydrogen Energy, 43 (36). pp. 17230-17243. ISSN 03603199

Shah, Z. and Dawar, A. and Islam, S. and Khan, I. and Ching, D.L.C. (2018) Darcy-Forchheimer flow of radiative carbon nanotubes with microstructure and inertial characteristics in the rotating frame. Case Studies in Thermal Engineering, 12. pp. 823-832. ISSN 2214157X

Shah, S.M.H. and Mustaffa, Z. and Yusof, K.W. (2018) Experimental studies on the threshold of vehicle instability in floodwaters. Jurnal Teknologi, 80 (5). pp. 25-36. ISSN 01279696

Sharifi, S. and Gohari, S. and Sharifiteshnizi, M. and Alebrahim, R. and Burvill, C. and Yahya, Y. and Vrcelj, Z. (2018) Fracture of laminated woven GFRP composite pressure vessels under combined low-velocity impact and internal pressure. Archives of Civil and Mechanical Engineering, 18 (4). pp. 1715-1728. ISSN 16449665

Safiyullah, F. and Sulaiman, S.A. and Naz, M.Y. and Jasmani, M.S. and Ghazali, S.M.A. (2018) Prediction on performance degradation and maintenance of centrifugal gas compressors using genetic programming. Energy, 158. pp. 485-494. ISSN 03605442

Sarwono, A. and Man, Z. and Idris, A. and Nee, T.H. and Muhammad, N. and Khan, A.S. and Ullah, Z. (2018) Alkyd paint removal: Ionic liquid vs volatile organic compound (VOC). Progress in Organic Coatings, 122. pp. 79-87. ISSN 03009440

Shafiq, N. and Hussein, A.A.E. and Nuruddin, M.F. and Al Mattarneh, H. (2018) Effects of sugarcane bagasse ash on the properties of concrete. Proceedings of the Institution of Civil Engineers: Engineering Sustainability, 171 (3). pp. 123-132. ISSN 14784629

Saman, N. and Tan, J.-W. and Mohtar, S.S. and Kong, H. and Lye, J.W.P. and Johari, K. and Hassan, H. and Mat, H. (2018) Selective biosorption of aurum(III) from aqueous solution using oil palm trunk (OPT) biosorbents: Equilibrium, kinetic and mechanism analyses. Biochemical Engineering Journal, 136. pp. 78-87. ISSN 1369703X

Salam, M.A. and Ahmed, K. and Akter, N. and Hossain, T. and Abdullah, B. (2018) A review of hydrogen production via biomass gasification and its prospect in Bangladesh. International Journal of Hydrogen Energy, 43 (32). pp. 14944-14973. ISSN 03603199

Singa, P.K. and Isa, M.H. and Lim, J.-W. and Ho, Y.-C. (2018) Kinetics and optimization of electro-fenton process for CoD removal from hazardous waste landfill leachate. International Journal of Civil Engineering and Technology, 9 (8). pp. 1276-1284. ISSN 09766308

Sazali, N. and Salleh, W.N.W. and Ismail, A.F. and Ismail, N.H. and Sokri, M.N.M. and Nordin, N.A.H.M. (2018) CO2 selective carbon tubular membrane: The effect of stabilization temperature on BTDA-TDI/MDI P84 co-polyimide. International Journal of Engineering, Transactions B: Applications, 31 (8). pp. 1356-1363. ISSN 1728144X

Salim, D.A. and Majid, M.A.A. and Noordin, A. (2018) Study on turbine inlet air cooling by chilled water from steam absorption chiller. ARPN Journal of Engineering and Applied Sciences, 13 (15). pp. 4453-4457. ISSN 18196608

Supian, A.B.M. and Sapuan, S.M. and Zuhri, M.Y.M. and Zainudin, E.S. and Ya, H.H. (2018) Hybrid reinforced thermoset polymer composite in energy absorption tube application: A review. Defence Technology, 14 (4). pp. 291-305. ISSN 22149147

Satar, I. and Daud, W.R.W. and Kim, B.H. and Somalu, M.R. and Ghasemi, M. and Bakar, M.H.A. and Jafary, T. and Timmiati, S.N. (2018) Performance of titanium�nickel (Ti/Ni) and graphite felt-nickel (GF/Ni) electrodeposited by Ni as alternative cathodes for microbial fuel cells. Journal of the Taiwan Institute of Chemical Engineers, 89. pp. 67-76. ISSN 18761070

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2018) Bio-inspired network on chip having both guaranteed throughput and best effort services using fault-tolerant algorithm. IEEJ Transactions on Electrical and Electronic Engineering, 13 (8). pp. 1153-1162. ISSN 19314973

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Experimental evaluation and theoretical prediction of CO2 & CH4 permeation in PSF/PDMS composite membrane under the influence of membrane swelling. Canadian Journal of Chemical Engineering, 96 (8). pp. 1796-1804. ISSN 00084034

Sedighi, M. and Mohammadi, M. and Sedighi, M. and Ghasemi, M. (2018) Biobased Cadaverine as a Green Template in the Synthesis of NiO/ZSM-5 Nanocomposites for Removal of Petroleum Asphaltenes: Financial Analysis, Isotherms, and Kinetics Study. Energy and Fuels, 32 (7). pp. 7412-7422. ISSN 08870624

Singh, D. and Murugaiyah, V. and Hamid, S.B.S. and Kasinather, V. and Chan, M.S.A. and Ho, E.T.W. and Grundmann, O. and Chear, N.J.Y. and Mansor, S.M. (2018) Assessment of gonadotropins and testosterone hormone levels in regular Mitragyna speciosa (Korth.) users. Journal of Ethnopharmacology, 221. pp. 30-36. ISSN 03788741

Samat, N.A.S.A. and Zabiri, H. and Kamaruddin, B. (2018) The development and investigation analysis of an arx-based generalized likelihood ratio (GLR) stiction detection method. Jurnal Teknologi, 80 (4). pp. 1-16. ISSN 01279696

Suleman, H. and Maulud, A.S. and Syalsabila, A. (2018) Thermodynamic modelling of carbon dioxide solubility in aqueous amino acid salt solutions and their blends with alkanolamines. Journal of CO2 Utilization, 26. pp. 336-349. ISSN 22129820

Shehzad, N. and Tahir, M. and Johari, K. and Murugesan, T. and Hussain, M. (2018) A critical review on TiO2 based photocatalytic CO2 reduction system: Strategies to improve efficiency. Journal of CO2 Utilization, 26. pp. 98-122. ISSN 22129820

Sachan, S. and Adnan, N. (2018) Stochastic charging of electric vehicles in smart power distribution grids. Sustainable Cities and Society, 40. pp. 91-100. ISSN 22106707

Shahriar, M.R. and Borghesani, P. and Tan, A.C.C. (2018) Electrical Signature Analysis-Based Detection of External Bearing Faults in Electromechanical Drivetrains. IEEE Transactions on Industrial Electronics, 65 (7). pp. 5941-5950. ISSN 02780046

Sarwono, A. and Man, Z. and Bustam, M.A. and Subbarao, D. and Idris, A. and Muhammad, N. and Khan, A.S. and Ullah, Z. (2018) Swelling mechanism of urea cross-linked starch�lignin films in water. Environmental Technology (United Kingdom), 39 (12). pp. 1522-1532. ISSN 09593330

Sabri, A.A.M. and Siddiqui, N.A. (2018) Variance in reservoir quality due to diagenesis: A study from tidal deposits, Nyalau formation, Sarawak, east Malaysia. Bulletin of the Geological Society of Malaysia, 65. pp. 101-106. ISSN 01266187

Salimun, N. and Rafek, A.G. and Noh, K.A.M. (2018) Correlation of seismic velocity and density of metasandstone from Kati formation, Seri Iskandar, Perak, Malaysia. Bulletin of the Geological Society of Malaysia, 65. pp. 131-134. ISSN 01266187

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Khatani, M. and Bashiri, R. and Zaine, S.N.A. and Shamsudin, A.E. (2018) Dual functional passivating layer of graphene/TiO2 for improved performance of dye-sensitized solar cells. Applied Nanoscience (Switzerland), 8 (5). pp. 1001-1013. ISSN 21905509

Saucedo-Martínez, J.A. and Pérez-Lara, M. and Marmolejo-Saucedo, J.A. and Salais-Fierro, T.E. and Vasant, P. (2018) Industry 4.0 framework for management and operations: a review. Journal of Ambient Intelligence and Humanized Computing, 9 (3). pp. 789-801. ISSN 18685137

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. and Bakhsh, S.T. (2018) An Analytical and Experimental Approach to Diagnose Unbalanced Voltage Supply. Arabian Journal for Science and Engineering, 43 (6). pp. 2735-2746. ISSN 2193567X

Sabil, K.M. and Partoon, B. (2018) Recent advances on carbon dioxide capture through a hydrate-based gas separation process. Current Opinion in Green and Sustainable Chemistry, 11. pp. 22-26. ISSN 24522236

Shamshirgaran, S. and Assadi, M.K. and Al-Kayiem, H.H. and Sharma, K.V. (2018) Energetic and exergetic performance of a solar flat-plate collector working with cu nanofluid. Journal of Solar Energy Engineering, Transactions of the ASME, 140 (3). ISSN 01996231

Soleimani, H. and Baig, M.K. and Yahya, N. and Khodapanah, L. and Sabet, M. and Demiral, B.M.R. and Burda, M. (2018) Impact of carbon nanotubes based nanofluid on oil recovery efficiency using core flooding. Results in Physics, 9. pp. 39-48. ISSN 22113797

Shamshirgaran, S.R. and Khalaji Assadi, M. and Viswanatha Sharma, K. (2018) Application of nanomaterials in solar thermal energy storage. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 54 (6). pp. 1555-1577. ISSN 09477411

Suleman, H. and Maulud, A.S. and Man, Z. (2018) Experimental measurements and modelling of carbon dioxide solubility in aqueous AMP/MDEA and Piperazine/MDEA blends. Fluid Phase Equilibria, 463. pp. 142-148. ISSN 03783812

Shah, S.N. and Pranesh, M. and Raj, J.J. and Mutalib, M.I.A. and Lethesh, K.C. and Ghanem, O.B. and Ullah, Z. (2018) De-acidification of crude oil using supported ionic liquids phases. Separation and Purification Technology, 196. pp. 96-105. ISSN 13835866

Sabet, M. and Soleimani, H. and Hosseini, S. (2018) Effect of addition graphene to ethylene vinyl acetate and low-density polyethylene. Journal of Vinyl and Additive Technology, 24. E177-E185. ISSN 10835601

Samsuri, S. and Amran, N.A. and Jusoh, M. (2018) Modelling of heat transfer for progressive freeze concentration process by spiral finned crystallizer. Chinese Journal of Chemical Engineering, 26 (5). pp. 970-975. ISSN 10049541

Salman, H.M. and Wan Ahmad, W.F. and Sulaiman, S. (2018) Usability Evaluation of the Smartphone User Interface in Supporting Elderly Users from Experts' Perspective. IEEE Access, 6. pp. 22578-22591. ISSN 21693536

Shaikh, P.H. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. (2018) Intelligent multi-objective optimization for building energy and comfort management. Journal of King Saud University - Engineering Sciences, 30 (2). pp. 195-204. ISSN 10183639

Shamshirgaran, S.R. and Assadi, M.K. and Al-Kayiem, H.H. and Sharma, K.V. (2018) The role of nanomaterials in the enhancement of non-concentrating solar collectors technology: Die Rolle von Nanomaterialien für die Weiterentwicklung der nicht konzentrierten Solarkollektorentechnologie. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 435-441. ISSN 09335137

Syed, Z.I. and Liew, M.S. and Rahman, S.A. and Palaniandy, D.K. (2018) Evaluation of Failure Capacity of Offshore Riser Protectors Under Vessel Impact. Journal of Failure Analysis and Prevention, 18 (2). pp. 280-290. ISSN 15477029

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Development, characterization and performance evaluation of a swelling resistant membrane for CO2/CH4 separation. Journal of Natural Gas Science and Engineering, 52. pp. 390-400. ISSN 18755100

Singh, N. and Singh, A.K. (2018) Data Privacy Protection Mechanisms in Cloud. Data Science and Engineering, 3 (1). pp. 24-39. ISSN 23641185

Shamim, M.Y. and Buang, A. and Shariff, A.M. and Anjum, H. (2018) Implementation of safety performance framework (SPF) in process industries to avoid disasters. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 5022-5035. ISSN 22298649

Shehzad, N. and Johari, K. and Murugesan, T. and Tahir, M. (2018) Graphene Oxide as An Efficient Photocatalyst For Photocatalytic Reduction of CO2 Into Solar Fuel. International Journal of Automotive and Mechanical Engineering, 15 (1). pp. 4909-4918. ISSN 22298649

Seo, J.H. and Kim, D.K. and Choi, H.S. and Yu, S.Y. and Park, K.S. (2018) Simplified Technique for Predicting Offshore Pipeline Expansion. Journal of Marine Science and Application, 17 (1). pp. 68-78. ISSN 16719433

Sikander, U. and Sufian, S. and KuShaari, K. and Chong, F.K. (2018) Effects of catalytic bed position on hydrogen production by methane decomposition. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3313-3320. ISSN 22894659

Salvinder, K.M.S. and Zabiri, H. and Isa, F. and Taqvi, S.A. and Roslan, M.A.H. and Shariff, A.M. (2018) Dynamic modelling, simulation and basic control of CO2 absorption based on high pressure pilot plant for natural gas treatment. International Journal of Greenhouse Gas Control, 70. pp. 164-177. ISSN 17505836

Saieed, A. and Pao, W. and Hashim, F.M. (2018) Effect of T-junction diameter ratio on stratified-wavy flow separation. Journal of Natural Gas Science and Engineering, 51. pp. 223-232. ISSN 18755100

Saidu, A. and Wagiran, H. and Saeed, M.A. and Obayes, H.K. and Bala, A. and Usman, F. (2018) Thermoluminescence response of rare earth activated zinc lithium borate glass. Radiation Physics and Chemistry, 144. pp. 413-418. ISSN 0969806X

Shafiq, N. and Gardezi, S.S.S. and Nuruddin, M.F. and Abdullah Zawawi, N.A.W. (2018) Recurrent carbon footprint assessment and forecasting for conventional housing in tropical regions: A Malaysian case study. Environmental Progress and Sustainable Energy, 37 (2). pp. 839-849. ISSN 19447442

Samsuri, S. and Mohd Bakri, M.M. (2018) Optimization of fractional crystallization on crude biodiesel purification via response surface methodology. Separation Science and Technology (Philadelphia), 53 (3). pp. 567-572. ISSN 01496395

Sang, W.Y. and Ching, O.P. (2018) Tailoring MCM-41 mesoporous silica particles through modified sol-gel process for gas separation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 46-56. ISSN 22897879

Shameen, Z. and Yusoff, M.Z. and Saad, M.N.M. and Malik, A.S. and Muzammel, M. (2018) Electroencephalography (EEG) based drowsiness detection for drivers: A review. ARPN Journal of Engineering and Applied Sciences, 13 (4). pp. 1458-1464. ISSN 18196608

Soleimani, H. and Baig, M.K. and Yahya, N. and Khodapanah, L. and Sabet, M. and Demiral, B.M.R. and Burda, M. (2018) Synthesis of ZnO nanoparticles for oil�water interfacial tension reduction in enhanced oil recovery. Applied Physics A: Materials Science and Processing, 124 (2). ISSN 09478396

Suleman, H. and Maulud, A.S. and Shah, S.N. and Man, Z. and Mutalib, M.I.A. (2018) Thermodynamic modelling of liquid-liquid extraction systems involving ionic liquids: A new approach. Journal of Molecular Liquids, 252. pp. 18-23. ISSN 01677322

Subhani, A.R. and Kamel, N. and Mohamad Saad, M.N. and Nandagopal, N. and Kang, K. and Malik, A.S. (2018) Mitigation of stress: new treatment alternatives. Cognitive Neurodynamics, 12 (1). ISSN 18714080

Setvati, M.R. and Mustaffa, Z. (2018) Rehabilitation of notched circular hollow sectional steel beam using CFRP patch. Steel and Composite Structures, 26 (2). pp. 151-161. ISSN 12299367

Seyedin, S.H. and Ardjmand, M. and Safekordi, A.A. and Raygan, S. and Zhalehrajabi, E. and Rahmanian, N. (2018) Using response surface methodology to optimize the operating parameters in a top-spray fluidized bed coating system. Surface and Coatings Technology, 334. pp. 43-49. ISSN 02578972

Samsudin, M.F.R. and Sufian, S. and Mohamed, N.M. and Bashiri, R. and Wolfe, F. and Ramli, R.M. (2018) Enhancement of hydrogen production over screen-printed TiO2/BiVO4 thin film in the photoelectrochemical cells. Materials Letters, 211. pp. 13-16. ISSN 0167577X

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2018) Enhanced gas separation performance of PSF membrane after modification to PSF/PDMS composite membrane in CO2/CH4 separation. Journal of Applied Polymer Science, 135 (1). ISSN 00218995

Saucedo-Martínez, J.A. and Marmolejo-Saucedo, J.A. and Vasant, P. (2018) A set-partitioning-based model to save cost on the import processes. Studies in Computational Intelligence, 741. pp. 57-72. ISSN 1860949X

Saad, S.A. and Shafiq, N. and Ali, M. (2018) PHYSICOCHEMICAL PROPERTIES AND POZZOLANIC PERFORMANCE OF ULTRAFINE TREATED RICE HUSK ASH (UFTRHA) AS ADDITIVE IN CONCRETE. Planning Malaysia, 16 (2). pp. 314-323. ISSN 16756215

Shoieb, M.A. and Sum, C.W. and Ismail, M.S. and Gebretsadik, H.T. (2018) Mineralogical and petrographic characterization of the Paleozoic shale in the Kroh formation, North Perak, Peninsular Malaysia. Petroleum and Coal, 60 (5). pp. 1021-1028. ISSN 13377027

Shamsuddin, A.A.S. and Ghosh, D. (2018) Fracture network based on principal component analysis and neural network- A case study in the Malay Basin. International Journal of Engineering and Technology(UAE), 7 (3). pp. 62-66. ISSN 2227524X

Said, M.A. and Mun, L.K. and Aziz, A.R.A. (2018) Wall heat transfer analysis of internal combustion engine with free piston linear motion. International Journal of Engineering and Technology(UAE), 7 (3). pp. 141-144. ISSN 2227524X

Sarlan, A. and Azhan, S.M.A.S.M. and Ahmad, R. and Ahmad, W.F.W. and Hussain, A. (2018) Aedes breeding habitat localization system. International Journal of Engineering and Technology(UAE), 7 (4.19 S). pp. 45-49. ISSN 2227524X

Shokrollahi, F. and Lau, K.K. and Tay, W.H. and Lai, L.S. (2018) Power measurement by calorimetric method using water infrequency range between 1.7 Mhz to 3 Mhz. International Journal of Engineering and Technology(UAE), 7 (3). pp. 106-109. ISSN 2227524X

Singh, D. and Chye, Y. and Suo, C. and Yücel, M. and Grundmann, O. and Ahmad, M.Z. and Ho, E.T.W. and Mansor, S.M. and Yusof, S.R. and McCurdy, C.R. and M�ller, C. and Boyer, E.W. and Vicknasingam, B. (2018) Brain Magnetic Resonance Imaging of Regular Kratom (Mitragyna speciosa Korth.) Users: A preliminary study. Malaysian Journal of Medicine and Health Sciences, 14. pp. 65-70. ISSN 16758544

Shah, S.M.H. and Mustaffa, Z. and Yusof, K.W. and Zainuddin, M.Z. and Mew Ghazali, M.A. and Mokhtar, M.I. (2018) Design considerations of an advanced flood cautionary sign for vehicles safety at low lying areas. Malaysian Construction Research Journal, 5 (3 Spec). pp. 162-173. ISSN 19853807

Sholagberu, A.T. and Ul Mustafa, M.R. and Yusof, K.W. and Hashim, A.M. (2018) Geospatial assessment of soil moisture distribution in Cameron highlands using GIS and remote sensing techniques. Malaysian Construction Research Journal, 5 (3 Spec). pp. 14-27. ISSN 19853807

Suliman, S.H. and Hashim, W. and Ismail, A.F. and Zakariya, M.A. and Yahya, A.S. and Sauti, M.S. (2018) Measurements of mobile signal received power level at Ringlet, Cameron Highland, Malaysia. International Journal of Engineering and Technology(UAE), 7 (4). pp. 404-409. ISSN 2227524X

Saad, S.A. and Shafiq, N. and Ali, M. and Osman, M.M. (2018) Analysis by means of surface response to chemical composition and pozzolanic reactivity of ultrafine treated rice husk ash (UFTRHA) as cementing additive material. International Journal of Engineering and Technology(UAE), 7 (4). pp. 342-346. ISSN 2227524X

Saad, S.A. and Shafiq, N. and Osman, M.M. and Masjuki, S.A. (2018) Compressive strength and microstructure analysis of treated rice husk ash (TRHA) incorporated mortar. International Journal of Engineering and Technology(UAE), 7 (4). pp. 388-391. ISSN 2227524X

Syachruddin, A.R. and Syukur, A. and Suryaningsih, S. and Rahmawati, R. and Khan, A.L. (2018) Effect of shell color and nursery depth on the growth of pearl oyster pinctada maxima in Tekalok West Nusa Tenggara Indonesia. Indonesian Journal of Science and Technology, 3 (2). pp. 105-114. ISSN 25281410

Saed, K.A. and Aziz, N. and Abdulkadir, S.J. and Aziz, I.A. and Hassan, N.H. (2018) Data governance cloud security checklist at infrastructure as a service (IaaS). International Journal of Advanced Computer Science and Applications, 9 (10). pp. 297-306. ISSN 2158107X

Saad, S.A. and Shafiq, N. and Ali, M. (2018) Physicochemical properties and pozzolanic performance of ultrafine treated rice husk ash (uftrha) as additive in concrete. Planning Malaysia, 16 (2). pp. 285-292. ISSN 16756215

Sulong, S. and Sulaiman, S. (2018) Exploring blind users� experience on website to highlight the importance of user�s mental model. Communications in Computer and Information Science, 886. pp. 105-113. ISSN 18650929

Sulaiman, S. and Okere, H.C. and Rambli, D.R.A. and Foong, O.-M. (2018) Validation of a multimodal interaction model for foot reflexology virtual reality stress therapy application. International Journal of Business Information Systems, 29 (1). pp. 126-138. ISSN 17460972

Salman, H.M. and Wan Ahmad, W.F. and Sulaiman, S. (2018) Revisiting the usability of smartphone user interface for elderly users. Lecture Notes on Data Engineering and Communications Technologies, 5. pp. 155-162. ISSN 23674512

Shairi, N.A. and Zobilah, A.M. and Zakaria, Z. and Ahmad, B.H. and Zahari, M.K. and Ramli, F.A.M. and Wong, P.W. (2018) An Overview of Filter Integrated Switch (FIS) for RF and Microwave Applications. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-6). pp. 111-118. ISSN 21801843

Sivanathan, P. and Ismail, M.C. and Eng, K.K. (2018) Chloride Induced Stress Corrosion Cracking (CISCC) of austenitic stainless steel under thermal insulation at ambient temperature. Journal of Engineering and Applied Sciences, 13 (2). pp. 361-366. ISSN 1816949X

Shaharun, S. and Shaharun, M.S. and Shah, M.F.M. and Amer, N.A. (2018) Catalytic performance of Cu/ZnO/Al2O3/ZrO2 for slurry methanol synthesis from CO hydrogenation: Effect of Cu/Zn molar ratio. Sains Malaysiana, 47 (1). pp. 207-214. ISSN 01266039

Sivalingam, J.R. and Kait, C.F. and Wilfred, C.D. (2018) CeO2-TiO2 photocatalyst: Ionic liquid-mediated synthesis, characterization, and performance for diisopropanolamine visible light degradation. Bulletin of Chemical Reaction Engineering and Catalysis, 13 (1). pp. 170-178. ISSN 19782993

Sazali, N. and Salleh, W.N.W. and Ismail, A.F. and Nordin, N.A.H.M. and Ismail, N.H. and Mohamed, M.A. and Aziz, F. and Yusof, N. and Jaafar, J. (2018) Incorporation of thermally labile additives in carbon membrane development for superior gas permeation performance. Journal of Natural Gas Science and Engineering, 49. pp. 376-384. ISSN 18755100

Shahid, M.Z. and Maulud, A.S. and Bustam, M.A. (2018) Non-invasive monitoring of CO2 concentration in aqueous diethanolamine (DEA), methyldiethanolamine (MDEA) and their blends in high CO2 loading region using Raman spectroscopy and partial least square regression (PLSR). International Journal of Greenhouse Gas Control, 68. pp. 42-48. ISSN 17505836

T

Tran, M. and Memon, Z. and Saieed, A. and Pao, W. and Hashim, F. (2018) Numerical simulation of two-phase separation in T-junction with experimental validation. Journal of Mechanical Engineering and Sciences, 12. pp. 4216-4230. ISSN 22894659

Tijani, M.M. and Aqsha, A. and Yu, N. and Mahinpey, N. (2018) Determination of redox pathways of supported bimetallic oxygen carriers in a methane fuelled chemical looping combustion system. Fuel, 233. pp. 133-145. ISSN 00162361

Taqvi, S.A. and Tufa, L.D. and Zabiri, H. and Maulud, A.S. and Uddin, F. (2018) Multiple Fault Diagnosis in Distillation Column Using Multikernel Support Vector Machine. Industrial and Engineering Chemistry Research, 57 (43). pp. 14689-14706. ISSN 08885885

Teh, W.K. and Zabiri, H. and Samyudia, Y. and Jeremiah, S.S. and Kamaruddin, B. and Mohd Amiruddin, A.A.A. and Ramli, N.M. (2018) An Improved Diagnostic Tool for Control Valve Stiction Based on Nonlinear Principle Component Analysis. Industrial and Engineering Chemistry Research, 57 (33). pp. 11350-11365. ISSN 08885885

Talebian, S.H. and Sagir, M. and Mumtaz, M. (2018) An Integrated Property-Performance Analysis for CO2-Philic Foam-Assisted CO2-Enhanced Oil Recovery. Energy and Fuels, 32 (7). pp. 7773-7785. ISSN 08870624

Tan, X.B. and Lam, M.K. and Uemura, Y. and Lim, J.W. and Wong, C.Y. and Ramli, A. and Kiew, P.L. and Lee, K.T. (2018) Semi-continuous cultivation of Chlorella vulgaris using chicken compost as nutrients source: Growth optimization study and fatty acid composition analysis. Energy Conversion and Management, 164. pp. 363-373. ISSN 01968904

Thiruchelvam, L. and Dass, S.C. and Zaki, R. and Yahya, A. and Asirvadam, V.S. (2018) Correlation analysis of air pollutant index levels and dengue cases across five different zones in Selangor, Malaysia. Geospatial Health, 13 (1). pp. 102-109. ISSN 18271987

Ting, D.H. (2018) Modeling the customer satisfaction function: a two-country comparison. Electronic Markets, 28 (2). pp. 163-175. ISSN 10196781

Tan, W.-N. and Lim, J.-Q. and Afiqah, F. and Nik Mohamed Kamal, N.N.S. and Abdul Aziz, F.A. and Tong, W.-Y. and Leong, C.-R. and Lim, J.-W. (2018) Chemical composition and cytotoxic activity of Garcinia atroviridis Griff. ex T. Anders. essential oils in combination with tamoxifen. Natural Product Research, 32 (7). pp. 854-858. ISSN 14786419

Tran, C.D. and Ibrahim, R. and Asirvadam, V.S. and Saad, N. and Sabo Miya, H. (2018) Internal model control for industrial wireless plant using WirelessHART hardware-in-the-loop simulator. ISA Transactions, 75. pp. 236-246. ISSN 00190578

Tijani, M.M. and Aqsha, A. and Mahinpey, N. (2018) X-ray diffraction and TGA kinetic analyses for chemical looping combustion applications. Data in Brief, 17. pp. 200-209. ISSN 23523409

Tahir, Z. and Ilyas, A. and Li, X. and Bilad, M.R. and Vankelecom, I.F.J. and Khan, A.L. (2018) Tuning the gas separation performance of fluorinated and sulfonated PEEK membranes by incorporation of zeolite 4A. Journal of Applied Polymer Science, 135 (10). ISSN 00218995

Theng, S.G. and Jumbri, K. and Wirzal, M.D.H. (2018) Molecular dynamics simulation of membrane in room temperature ionic liquids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 42 (1). pp. 38-45. ISSN 22897879

Tan, S.C. and Wang, S. and Watada, J. (2018) A self-adaptive class-imbalance TSK neural network with applications to semiconductor defects detection. Information Sciences, 427. pp. 1-17. ISSN 00200255

Tayeh, B.A. and Al Hallaq, K. and Al Faqawi, A.H. and Alaloul, W.S. and Kim, S.Y. (2018) Success factors and barriers of last planner system implementation in the gaza strip construction industry. Open Construction and Building Technology Journal, 12 (1). pp. 389-403. ISSN 18748368

Taib, S.M. and Mohd Zabidi, Z.A. and Aziz, I.A. and Mousor, F.H. and Bakar, A.A. and Mokhtar, A.A. (2018) Discovery of corrosion patterns using symbolic time series representation and N-gram model. International Journal of Advanced Computer Science and Applications, 9 (12). pp. 554-560. ISSN 2158107X

Tariq, H. and Jilani, T. and Ali, E. and Faraz, S. and Amjad, U. (2018) Recurrence relation for projectile simulation project and game based learning. International Journal of Advanced Computer Science and Applications, 9 (12). pp. 500-508. ISSN 2158107X

Tajudin, H.A. and Alkhatib, M.F. and Mirghani, M.E.S. and Salleh, H.M. and Nasef, M.M. (2018) Immobilisation of candida rugosa lipase on aminated polyethylene/polypropylene microfibrous sheet modified with oxirane group. ASM Science Journal, 11 (3). pp. 182-200. ISSN 18236782

Toloue, I. and Liew, M.S. and Harahap, I.S.H. and Lee, H.E. (2018) A novel algorithm for effective vibration control of portal frames. Journal of Engineering and Technological Sciences, 50 (3). pp. 315-329. ISSN 23375779

Tayeh, B.A. and Al Hallaq, K. and Alaloul, W.S. and Kuhail, A.R. (2018) Factors affecting the success of construction projects in Gaza strip. Open Civil Engineering Journal, 12 (1). pp. 301-315. ISSN 18741495

Taherei Ghazvinei, P. and Darvishi, H.H. and Mosavi, A. and Bin Wan Yusof, K. and Alizamir, M. and Shamshirband, S. and Chau, K.-W. (2018) Sugarcane growth prediction based on meteorological parameters using extreme learning machine and artificial neural network. Engineering Applications of Computational Fluid Mechanics, 12 (1). pp. 738-749. ISSN 19942060

Thangiah, M. and Basri, S. and Dominic, D.D. (2018) Developing a conceptual framework using exploratory testing to improve software quality in SME's. International Journal of Engineering and Technology(UAE), 7 (4). pp. 42-46. ISSN 2227524X

Ting, H. and Lau, W.M. and Cheah, J.-H. and Yacob, Y. and Memon, M.A. and Lau, E. (2018) Perceived quality and intention to revisit coffee concept shops in Malaysia: A mixed-methods approach. British Food Journal, 120 (5). pp. 1106-1119. ISSN 0007070X

Tuan, T.T. and Tufa, L.D. and Mutalib, M.I.A. and Ramli, N.M. (2018) Optimal operation of a process by integrating dynamic economic optimization and model predictive control formulated with empirical model. Archives of Control Sciences, 28 (1). pp. 35-50. ISSN 12302384

Tan, X.B. and Lam, M.K. and Uemura, Y. and Lim, J.W. and Wong, C.Y. and Lee, K.T. (2018) Cultivation of microalgae for biodiesel production: A review on upstream and downstream processing. Chinese Journal of Chemical Engineering, 26 (1). pp. 17-30. ISSN 10049541

Trinh, H. and Yusup, S. and Uemura, Y. (2018) Optimization and kinetic study of ultrasonic assisted esterification process from rubber seed oil. Bioresource Technology, 247. pp. 51-57. ISSN 09608524

U

Umar, U.A. and Shafiq, N. and Isa, M.H. (2018) Investigation of construction wastes generated in the Malaysian residential sector. Waste Management and Research, 36 (12). pp. 1157-1165. ISSN 0734242X

Uddin, F. and Tufa, L.D. and Maulud, A.S. (2018) Consistent and Effective Nonlinearity Index and its Application on Model Predictive Controller Performance Deterioration. Industrial and Engineering Chemistry Research, 57 (43). pp. 14596-14606. ISSN 08885885

Ullah, Z. and Khan, A.S. and Muhammad, N. and Ullah, R. and Alqahtani, A.S. and Shah, S.N. and Ghanem, O.B. and Bustam, M.A. and Man, Z. (2018) A review on ionic liquids as perspective catalysts in transesterification of different feedstock oil into biodiesel. Journal of Molecular Liquids, 266. pp. 673-686. ISSN 01677322

Ullah, H. and Wilfred, C.D. and Shaharun, M.S. (2018) Synthesis of nickel nanoparticle using ionic liquid based extract from polygonum minus and their applications. Desalination and Water Treatment, 125. pp. 32-39. ISSN 19443994

Ung, W.C. and Funane, T. and Katura, T. and Sato, H. and Tang, T.B. and Hani, A.F.M. and Kiguchi, M. (2018) Effectiveness Evaluation of Real-Time Scalp Signal Separating Algorithm on Near-Infrared Spectroscopy Neurofeedback. IEEE Journal of Biomedical and Health Informatics, 22 (4). pp. 1148-1156. ISSN 21682194

Ullah, S. and Daud, H. and Dass, S.C. and Hadi, F.-T. and Khalil, A. (2018) An eigenspace approach for detecting multiple space-time disease clusters: Application to measles hotspots detection in khyber-pakhtunkhwa, Pakistan. PLoS ONE, 13 (6). ISSN 19326203

Umar, A.A. and Saaid, I.B.M. and Sulaimon, A.A. and Pilus, R.B.M. (2018) A review of petroleum emulsions and recent progress on water-in-crude oil emulsions stabilized by natural surfactants and solids. Journal of Petroleum Science and Engineering, 165. pp. 673-690. ISSN 09204105

Uddin, F. and Tufa, L.D. and Shah Maulud, A. and Taqvi, S.A. (2018) System Behavior and Predictive Controller Performance Near the Azeotropic Region. Chemical Engineering and Technology, 41 (4). pp. 806-818. ISSN 09307516

Usman Shah, S.M. and Abdullah, M.A. (2018) Effects of macro/micronutrients on green and brown microalgal cell growth and fatty acids in photobioreactor and open-tank systems. Biocatalysis and Agricultural Biotechnology, 14. pp. 10-17. ISSN 18788181

Ullah Khan, I. and Othman, M.H.D. and Ismail, A.F. and Matsuura, T. and Hashim, H. and Nordin, N.A.H.M. and Rahman, M.A. and Jaafar, J. and Jilani, A. (2018) Status and improvement of dual-layer hollow fiber membranes via co-extrusion process for gas separation: A review. Journal of Natural Gas Science and Engineering, 52. pp. 215-234. ISSN 18755100

Uddin, M. and Romlie, M.F. and Abdullah, M.F. and Abd Halim, S. and Abu Bakar, A.H. and Chia Kwang, T. (2018) A review on peak load shaving strategies. Renewable and Sustainable Energy Reviews, 82. pp. 3323-3332. ISSN 13640321

Utomo, C. and Rahmawati, Y. and Krestawan, I. (2018) DEVELOPMENT OF URBAN MARKET SPATIAL FOR HIGHEST AND BEST USE OF LAND PRODUCTIVITY AND SUSTAINABILITY. Planning Malaysia, 16 (1). pp. 163-172. ISSN 16756215

Ur Rehman, Z. and Yahya, N. and Qureshi, S. and Alqasem, B. and Irfan, M. (2018) CO2 mixture adsorption at single-walled carbon nanotube: Effects from different gases and stoichiometric ratios. Journal of Computational and Theoretical Nanoscience, 15 (6-7). pp. 1892-1897. ISSN 15461955

Utomo, C. and Rahmawati, Y. and Krestawan, I. (2018) Development of urban market spatial for highest and best use of land productivity and sustainability. Planning Malaysia, 16 (1). pp. 163-172. ISSN 16756215

Ullah, B. and Ovinis, M. and Baharom, M.B. and Ali, S.S.A. and Javaid, M.Y. (2018) Pitch and depth control of underwater glider using LQG and LQR via Kalman filter. International Journal of Vehicle Structures and Systems, 10 (2). pp. 137-141. ISSN 09753060

Ullah, H. and Azizli, K.A.M. and Man, Z.B. and Ismail, M.B.C. and Rehman, S.U. and Khan, M.I. (2018) Efficient Entrapment of Oxirane Ring Containing Compounds in Thermally Stable Poly(urea-formaldehyde) Polymer Shell Wall. Polymer Science - Series B, 60 (1). pp. 20-34. ISSN 15600904

V

Vandrangi, S.K. and Emani, S. and Velidi, G. and Sharma, K.V. (2018) Friction Factor Analysis of SiO2 and Al2O3 Nanofluids dispersed in 60 EGW and 40 EGW Base Fluids. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 51 (1). pp. 61-70. ISSN 22897879

Venkatraman, V. and Raj, J.J. and Evjen, S. and Lethesh, K.C. and Fiksdahl, A. (2018) In silico prediction and experimental verification of ionic liquid refractive indices. Journal of Molecular Liquids, 264. pp. 563-570. ISSN 01677322

Vasant, P. and Weber, G.-W. and Le, V.T. (2018) Special issue for COMPSE 2016: First EAI international Conference on computer science and Engineering, November 11�12, 2016, Penang, Malaysia. Journal of Ambient Intelligence and Humanized Computing, 9 (3). pp. 739-742. ISSN 18685137

Vasant, P. and Marmolejo-Saucedo, J.A. and Litvinchev, I. (2018) Preface. EAI/Springer Innovations in Communication and Computing. v-vi. ISSN 25228595

Vandrangi, S.K. and Emani, S. and Sharma, K.V. and Velidi, G. (2018) Computational analysis to determine the heat transfer coefficients for SiO 2 /60EGW and SiO 2 /40EGW based nano-fluids. Annales de Chimie: Science des Materiaux, 42 (1). pp. 103-114. ISSN 01519107

Vantuch, T. and Zelinka, I. and Vasant, P. (2018) An algorithm for Elliott Waves pattern detection. Intelligent Decision Technologies, 12 (1). pp. 15-24. ISSN 18724981

Vasant, P. and Kose, U. (2018) Special Issue for COMPSE 2016 - Current Trends in Optimization Technology. Intelligent Decision Technologies, 12 (1). pp. 1-2. ISSN 18724981

W

Wong, E.W.C. and Kim, D.K. (2018) A simplified method to predict fatigue damage of TTR subjected to short-term VIV using artificial neural network. Advances in Engineering Software, 126. pp. 100-109. ISSN 09659978

Wan, R. and Renganathan, S. and Kral, I. (2018) Tekná�a vanishing oral tradition among the Kayan people of Sarawak, Malaysian Borneo. Indonesia and the Malay World, 46 (135). pp. 218-234. ISSN 13639811

Wong, L.-P. and Isa, M.H. and Bashir, M.J.K. and Yaqub, A. (2018) Low frequency ultrasound treatment of palm oil mill effluent for solubilization of organic matter. Desalination and Water Treatment, 108. pp. 164-170. ISSN 19443994

Weber, G.-W. and Vasant, P. and Marmolejo Saucedo, J.A. (2018) Computer science and engineering. Journal of Computational Science, 25. pp. 416-418. ISSN 18777503

Waheed, M. and Ahmad, R. and Ahmed, W. and Drieberg, M. and Alam, M.M. (2018) Towards efficient wireless body area network using two-way relay cooperation. Sensors (Switzerland), 18 (2). ISSN 14248220

Wong, L.-P. and Isa, M.H. and Bashir, M.J.K. (2018) Disintegration of palm oil mill effluent organic solids by ultrasonication: Optimization by response surface methodology. Process Safety and Environmental Protection, 114. pp. 123-132. ISSN 09575820

Whah, C.Y. and Tiek, L.K. and Beng, K.S. and Kamaruddin, S. (2018) Knowledge and talent development in the Electronics and electrical (EE) industry of Malaysia state-industry-university collaboration. Asian Journal of Social Science, 46 (6). pp. 668-705. ISSN 15684849

Wang, F.-A. and Lakshmipriya, T. and Gopinath, S.C.B. (2018) Red Spectral Shift in Sensitive Colorimetric Detection of Tuberculosis by ESAT-6 Antigen-Antibody Complex: a New Strategy with Gold Nanoparticle. Nanoscale Research Letters, 13. ISSN 19317573

Wang, B. and Li, Y. and Wang, S. and Watada, J. (2018) A Multi-Objective Portfolio Selection Model with Fuzzy Value-At-Risk Ratio. IEEE Transactions on Fuzzy Systems, 26 (6). pp. 3673-3687. ISSN 10636706

Woldemichael, D.E. (2018) Enhancing active learning in large classes using web clicker. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 111-120. ISSN 01287702

Wannahari, R. and Sannasi, P. and Nordin, M.F.M. and Mukhtar, H. (2018) Sugarcane bagasse derived nano magnetic adsorbent composite (SCB-NMAC) for removal of Cu2+ from aqueous solution. ARPN Journal of Engineering and Applied Sciences, 13 (1). pp. 1-9. ISSN 18196608

Watada, J. and Zhang, H. and Melo, H. and Sun, D. and Vasant, P. (2018) Boosted HOG features and its application on object movement detection. Smart Innovation, Systems and Technologies, 81. pp. 340-348. ISSN 21903018

Watada, J. and Zhang, H. and Melo, H. and Wang, J. and Vasant, P. (2018) SURF algorithm-based panoramic image mosaic application. Smart Innovation, Systems and Technologies, 81. pp. 349-358. ISSN 21903018

Watada, J. and Tan, S.C. and Matsumoto, Y. and Vasant, P. (2018) Rough set-based text mining from a large data repository of experts� diagnoses for power systems. Smart Innovation, Systems and Technologies, 73. pp. 136-144. ISSN 21903018

X

Xia, L. and Malik, A.S. and Subhani, A.R. (2018) A physiological signal-based method for early mental-stress detection. Biomedical Signal Processing and Control, 46. pp. 18-32. ISSN 17468094

Xin, O.W. and Zuo, L. and Iida, H. and Aziz, N. (2018) Gamification Effect of Loyalty Program and Its Assessment Using Game Refinement Measure: Case Study on Starbucks. Lecture Notes in Electrical Engineering, 488. pp. 161-171. ISSN 18761100

Y

Yaqub, S. and Lal, B. and Partoon, B. and Mellon, N.B. (2018) Investigation of the task oriented dual function inhibitors in gas hydrate inhibition: A review. Fluid Phase Equilibria, 477. pp. 40-57. ISSN 03783812

Yatim, M.A. and Ibrahim, M.N. and Abdullah, Z. and Md Syed, M.A. (2018) Supervisory communication and employees� job satisfaction in the small and medium-sized enterprises (SMEs). Jurnal Komunikasi: Malaysian Journal of Communication, 34 (4). pp. 285-302. ISSN 2289151X

Yeganeh Ghotbi, M. and Javanmard, A. and Soleimani, H. (2018) Three dimensional metal/N-doped nanoplate carbon catalysts for oxygen reduction, the reason for using a layered nanoreactor. Scientific Reports, 8 (1). ISSN 20452322

Yenugu, V.M.R. and Ambavaram, V.B.R. and Moniruzzaman, M. and Madhavi, G. (2018) A simple, sensitive, and straightforward LC�MS approach for rapid analysis of three potential genotoxic impurities in rabeprazole formulations. Journal of Separation Science, 41 (21). pp. 3966-3973. ISSN 16159306

Yiin, C.L. and Yusup, S. and Quitain, A.T. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Delignification kinetics of empty fruit bunch (EFB): a sustainable and green pretreatment approach using malic acid-based solvents. Clean Technologies and Environmental Policy, 20 (9). pp. 1987-2000. ISSN 1618954X

Yekeen, N. and Padmanabhan, E. and Idris, A.K. (2018) A review of recent advances in foam-based fracturing fluid application in unconventional reservoirs. Journal of Industrial and Engineering Chemistry, 66. pp. 45-71. ISSN 1226086X

Yong, Y.K. and Maulianda, B. and Wee, S.C. and Mohshim, D. and Elraies, K.A. and Wong, R.C. and Gates, I.D. and Eaton, D. (2018) Determination of stimulated reservoir volume and anisotropic permeability using analytical modelling of microseismic and hydraulic fracturing parameters. Journal of Natural Gas Science and Engineering, 58. pp. 234-240. ISSN 18755100

Yiin, C.L. and Yusup, S. and Quitain, A.T. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Life cycle assessment of oil palm empty fruit bunch delignification using natural malic acid-based low-transition-temperature mixtures: a gate-to-gate case study. Clean Technologies and Environmental Policy, 20 (8). pp. 1917-1928. ISSN 1618954X

Yahya, N. and Rehman, Z.U. and Shafie, A. and Alqasem, B. and Soleimani, H. and Irfan, M. and Qureshi, S. (2018) MWCNT for ambient urea synthesis. Physica B: Condensed Matter, 545. pp. 358-369. ISSN 09214526

Yasir, M. and Amir, N. and Ahmad, F. and Ullah, S. and Jimenez, M. (2018) Effect of basalt fibers dispersion on steel fire protection performance of epoxy-based intumescent coatings. Progress in Organic Coatings, 122. pp. 229-238. ISSN 03009440

Yiin, C.L. and Quitain, A.T. and Yusup, S. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Sustainable green pretreatment approach to biomass-to-energy conversion using natural hydro-low-transition-temperature mixtures. Bioresource Technology, 261. pp. 361-369. ISSN 09608524

Yoong, A.A. and Ghani Md Rafek, A. and Noh, K.A.M. and Mazlan, R. (2018) The reconstruction of 3D geo-lithological model of Pekan, Pahang: A possible onshore extension of Penyu basin. Bulletin of the Geological Society of Malaysia, 65. pp. 63-67. ISSN 01266187

Yekeen, N. and Manan, M.A. and Idris, A.K. and Samin, A.M. and Risal, A.R. (2018) Mechanistic study of nanoparticles�surfactant foam flow in etched glass micro-models. Journal of Dispersion Science and Technology, 39 (5). pp. 623-633. ISSN 01932691

Yekeen, N. and Manan, M.A. and Idris, A.K. and Padmanabhan, E. and Junin, R. and Samin, A.M. and Gbadamosi, A.O. and Oguamah, I. (2018) A comprehensive review of experimental studies of nanoparticles-stabilized foam for enhanced oil recovery. Journal of Petroleum Science and Engineering, 164. pp. 43-74. ISSN 09204105

Yiin, C.L. and Yusup, S. and Quitain, A.T. and Uemura, Y. and Sasaki, M. and Kida, T. (2018) Thermogravimetric analysis and kinetic modeling of low-transition-temperature mixtures pretreated oil palm empty fruit bunch for possible maximum yield of pyrolysis oil. Bioresource Technology, 255. pp. 189-197. ISSN 09608524

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. (2018) Fullerene C60 for enhancing phytoremediation of urea plant wastewater by timber plants. Environmental Science and Pollution Research, 25 (12). pp. 11351-11363. ISSN 09441344

Yaro, A.S. and Sha�Ameri, A.Z. and Kamel, N. (2018) Position estimation comparison of a 3-D linear lateration algorithm with a reference selection technique. Indonesian Journal of Electrical Engineering and Computer Science, 10 (1). pp. 207-213. ISSN 25024752

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. (2018) Nutrients balance for improvement of phytoremediation ability of teak seedlings (Tectona grandis). Journal of Plant Nutrition, 41 (5). pp. 545-551. ISSN 01904167

Yaro, A.S. and Sha�Ameri, A.Z. and Kamel, N. (2018) Position estimation error performance model for a minimum configuration 3-D multilateration. International Journal on Electrical Engineering and Informatics, 10 (1). pp. 153-169. ISSN 20856830

Yi, T.T. and Habte, A.D. (2018) Pressure transient behaviour of a horizontal steam injection well in a naturally fractured reservoir. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 1071-1079. ISSN 18196608

Yusuf, I. and Padmanabhan, E. (2018) IMPACT OF SMALL - SCALE HETEROGENEITY ON POTENTIAL RECOVERY IN SELECTED RESERVOIR SANDSTONES FROM WEST BARAM DELTA, OFFSHORE, SARAWAK. Petroleum and Coal, 60 (3). pp. 496-507. ISSN 13377027

Yahya, A.A. and Ali, N. and Mohd Kamal, N.L. and Shahidan, S. and Beddu, S. and Nuruddin, M.F. and Shafiq, N. (2018) Characterization of coal bottom ash (CBA) heavy metal element after acid leaching treatment. Malaysian Construction Research Journal, 4 (2 Spec). pp. 141-151. ISSN 19853807

Yaro, A.S. and Sha�Ameri, A.Z. and Kamel, N. (2018) Position estimation bias analysis of a multilateration system with a reference station selection technique. Advances in Electrical and Electronic Engineering, 16 (3). pp. 332-340. ISSN 13361376

Yussiff, A.-S. and Yussiff, W.F.W.A. and Mustapha, E.E. (2018) E-collaborative learning experience, interdependencies of presences and learning outcomes: Evidence of mediating and moderating effects. International Journal of Business Information Systems, 29 (1). pp. 23-41. ISSN 17460972

Yusoff, A.A. and Abdullah, M.R.T.L. and Endut, M.N.A.-A. and Aziz, E.A. and Talib, A.T. (2018) Indicators for Socio-Religious Harmony Index (SRHI) instrument for Malaysia: Findings of FDM expert panel. Pertanika Journal of Social Sciences and Humanities, 26 (Januar). pp. 55-72. ISSN 01287702

Yusoff, N.H.N. and Mamat, O. and Isa, M.C. and Amir, N. (2018) Optimisation of electrodeposition parameters on the mechanical properties of nickel cobalt coated mild steel. Defence S and T Technical Bulletin, 11 (1). pp. 57-65. ISSN 19856571

Yahya, N. (2018) Agricultural 4.0: Its implementation toward future sustainability. Green Energy and Technology (978981). pp. 125-145. ISSN 18653529

Yahya, N. (2018) Reactor design for novel green urea synthesis. Green Energy and Technology (978981). pp. 61-98. ISSN 18653529

Yahya, N. (2018) Efficacy of green urea for sustainable agriculture. Green Energy and Technology (978981). pp. 99-123. ISSN 18653529

Yahya, N. (2018) Urea fertilizer: The global challenges and their impact to our sustainability. Green Energy and Technology (978981). pp. 1-21. ISSN 18653529

Yahya, N. (2018) Gas adsorption and urea formation using magnetically induced environment. Green Energy and Technology (978981). pp. 23-60. ISSN 18653529

Yong, Z.J. and Bashir, M.J.K. and Ng, C.A. and Sethupathi, S. and Lim, J.-W. (2018) A sequential treatment of intermediate tropical landfill leachate using a sequencing batch reactor (SBR) and coagulation. Journal of Environmental Management, 205. pp. 244-252. ISSN 03014797

Yuan, L.X. and Tan, S.C. and Goh, P.Y. and Lim, C.P. and Watada, J. (2018) Fuzzy ARTMAP with binary relevance for multi-label classification. Smart Innovation, Systems and Technologies, 73. pp. 127-135. ISSN 21903018

Z

Zulfiqar, M. and Chowdhury, S. and Sufian, S. and Omar, A.A. (2018) Enhanced photocatalytic activity of Orange II in aqueous solution using solvent-based TiO2 nanotubes: Kinetic, equilibrium and thermodynamic studies. Journal of Cleaner Production, 203. pp. 848-859. ISSN 09596526

Zaharin, H.A. and Rani, A.M.A. and Azam, F.I. and Ginta, T.L. and Sallih, N. and Ahmad, A. and Yunus, N.A. and Zulkifli, T.Z.A. (2018) Effect of unit cell type and pore size on porosity and mechanical behavior of additively manufactured Ti6Al4V scaffolds. Materials, 11 (12). ISSN 19961944

Zaffar, M. and Hashmani, M.A. and Savita, K.S. and Qayyum, A. (2018) A predictive model for student outcomes using sparse coding � Hybrid features selection. Journal of Theoretical and Applied Information Technology, 96 (21). pp. 7124-7138. ISSN 19928645

Ziyada, A.K. and Wilfred, C.D. (2018) Effect of Cation Modification on the Physicochemical Properties and CO2 Solubility: Nonfluorinated Phosphonium-Based Ionic Liquids Incorporating a Dioctylsulfosuccinate Anion. Journal of Chemical and Engineering Data, 63 (10). pp. 3672-3683. ISSN 00219568

Zobilah, A.M. and Shairi, N.A. and Zakaria, Z. and Ahmad, B.H. and Zahari, M.K. and Wong, P.W. (2018) Simulation analysis on the potential application of matched bandstop to bandpass filter in filter integrated SPDT switch design. Journal of Telecommunication, Electronic and Computer Engineering, 10 (4). pp. 127-131. ISSN 21801843

Zhang, H. and Watada, J. (2018) A european call options pricing model using the infinite pure jump levy process in a fuzzy environment. IEEJ Transactions on Electrical and Electronic Engineering, 13 (10). pp. 1468-1482. ISSN 19314973

Zafar, R. and Kamel, N. and Naufal, M. and Malik, A.S. and Dass, S.C. and Ahmad, R.F. and Abdullah, J.M. and Reza, F. (2018) A study of decoding human brain activities from simultaneous data of EEG and fMRI using MVPA. Australasian Physical and Engineering Sciences in Medicine, 41 (3). pp. 633-645. ISSN 01589938

Zahid, M. and Shafiq, N. and Isa, M.H. and Gil, L. (2018) Statistical modeling and mix design optimization of fly ash based engineered geopolymer composite using response surface methodology. Journal of Cleaner Production, 194. pp. 483-498. ISSN 09596526

Zahid, M. and Shafiq, N. and Jalal, A. (2018) Investigating the effects of solarcure curing method on the compressive strength, microstructure and polymeric reaction of fly ash based geopolymer. Construction and Building Materials, 181. pp. 227-237. ISSN 09500618

Zakaria, M.S. and Hassan, S. and Noor, M.F.M. (2018) Thermal degradation of Malaysian Domestic Wastewater Sludge (DWS) using thermogravimetric analysis method. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 48 (2). pp. 176-182. ISSN 22897879

Zhang, H. and Watada, J. (2018) Fuzzy Levy-GJR-GARCH American option pricing model based on an infinite pure jump process. IEICE Transactions on Information and Systems, E101D (7). pp. 1843-1859. ISSN 09168532

Zainal Abidin, M. and Rusli, R. and Khan, F. and Mohd Shariff, A. (2018) Development of inherent safety benefits index to analyse the impact of inherent safety implementation. Process Safety and Environmental Protection, 117. pp. 454-472. ISSN 09575820

Zulfiqar, M. and Chowdhury, S. and Omar, A.A. (2018) Hydrothermal synthesis of multiwalled TiO2 nanotubes and its photocatalytic activities for Orange II removal. Separation Science and Technology (Philadelphia), 53 (9). pp. 1412-1422. ISSN 01496395

Zahari, S.H.N. and Rusli, R. and Buang, A. and Mohanan, K. (2018) Minimum ignition energy of aluminium nanopowders as engineered nanomaterials (ENMs). International Journal of Automotive and Mechanical Engineering, 15 (2). pp. 5285-5294. ISSN 22298649

Zulkepli, S.N.I.S. and Hamid, N.H. and Shukla, V. (2018) Droplet velocity measurement based on dielectric layer thickness variation using digital microfluidic devices. Biosensors, 8 (2). ISSN 20796374

Zabiri, H. and Marappagounder, R. and Ramli, N.M. (2018) Parallel based support vector regression for empirical modeling of nonlinear chemical process systems. Sains Malaysiana, 47 (3). pp. 635-643. ISSN 01266039

Zelinka, I. and Tomaszek, L. and Vasant, P. and Dao, T.T. and Hoang, D.V. (2018) A novel approach on evolutionary dynamics analysis � A progress report. Journal of Computational Science, 25. pp. 437-445. ISSN 18777503

Zaidi, K.S. and Jeoti, V. and Drieberg, M. and Awang, A. and Iqbal, A. (2018) Fading Characteristics in Evaporation Duct: Fade Margin for a Wireless Link in the South China Sea. IEEE Access, 6. pp. 11038-11045. ISSN 21693536

Zelinka, I. and Vasant, P. and Duy, V.H. and Dao, T.T. (2018) Preface. Studies in Computational Intelligence, 741. xi-xiii. ISSN 1860949X

Zawawi, A. and Ramli, R.M. and Harun, N.Y. (2018) Synergistic effect of adsorption-photodegradation of composite TiO2 /AC for degradation of 1-butyl-3-methylimidazolium chloride Kesan sinergistik penjerapan-fotopenguraian dari bahan komposit TiO2 /AC untuk mengurai 1-butil-3-metillimidazolium klorida. Malaysian Journal of Analytical Sciences, 22 (4). pp. 648-658. ISSN 13942506

Zaffar, M. and Hashmani, M.A. and Savita, K.S. and Rizvi, S.S.H. (2018) A study of feature selection algorithms for predicting students academic performance. International Journal of Advanced Computer Science and Applications, 9 (5). pp. 541-549. ISSN 2158107X

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Shahid, M.U. (2018) Effect of paste viscosity on direct-current resistance in improving the efficiency of dye-sensitized solar cell. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 73-78. ISSN 21801843

Zahari, M.H.B. and Guan, B.H. and Meng, C.E. (2018) Development and evaluation of BaFe12 O19-PANI-MWCNT composite for electromagnetic interference (EMI) shielding. Progress In Electromagnetics Research C, 80. pp. 55-64. ISSN 19378718

Zhang, H. and Watada, J. (2018) Building fuzzy variance gamma option pricing models with jump levy process. Smart Innovation, Systems and Technologies, 73. pp. 105-116. ISSN 21903018