A

Al Kaisy, G.M.J. and Abdul Mutalib, M.I. and Bustam, M.A. and Leveque, J.-M. and Muhammad, N. (2016) Liquid-Liquid extraction of aromatics and sulfur compounds from base oil using ionic liquids. Journal of Environmental Chemical Engineering, 4 (4). pp. 4786-4793. ISSN 22133437

Ali, F. and Saeed, S. and Shah, S.S. and Rahim, F. and Duclaux, L. and Levêque, J.-M. and Reinert, L. (2016) Sulfonated polyimide-clay thin films for energy application. Recent Patents on Nanotechnology, 10 (3). pp. 221-230. ISSN 18722105

Al-Kayiem, H.H. and Bhayo, B.A. and Assadi, M. (2016) Comparative critique on the design parameters and their effect on the performance of S-rotors. Renewable Energy, 99. pp. 1306-1317. ISSN 09601481

Aziz, H. and Ahmad, F. (2016) Effects from nano-titanium oxide on the thermal resistance of an intumescent fire retardant coating for structural applications. Progress in Organic Coatings, 101. pp. 431-439. ISSN 03009440

Akilu, S. and Sharma, K.V. and Baheta, A.T. and Mamat, R. (2016) A review of thermophysical properties of water based composite nanofluids. Renewable and Sustainable Energy Reviews, 66. pp. 654-678. ISSN 13640321

Altaf, K. and Abdul Rani, A.M. and Ahmad, F. and Baharom, M. and Raghavan, V.R. (2016) Determining the effects of thermal conductivity on epoxy molds using profiled cooling channels with metal inserts. Journal of Mechanical Science and Technology, 30 (11). pp. 4901-4907. ISSN 1738494X

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Chai, W.L. and Ngeow, W.C. and Nawi, M.K.A. (2016) Investigation of Boron Addition on Densification and Cytotoxicity of Powder Injection Molded 316L Stainless Steel Dental Materials. Arabian Journal for Science and Engineering, 41 (11). pp. 4669-4681. ISSN 2193567X

Ali, Z. and Elamvazuthi, I. and Alsulaiman, M. and Muhammad, G. (2016) Automatic Voice Pathology Detection With Running Speech by Using Estimation of Auditory Spectrum and Cepstral Coefficients Based on the All-Pole Model. Journal of Voice, 30 (6). 757.e7-757.e19. ISSN 08921997

Ayodele, O.B. (2016) Structure and reactivity of ZSM-5 supported oxalate ligand functionalized nano-Fe catalyst for low temperature direct methane conversion to methanol. Energy Conversion and Management, 126. pp. 537-547. ISSN 01968904

Al-Shargie, F. and Kiguchi, M. and Badruddin, N. and Dass, S.C. and Hani, A.F.M. and Tang, T.B. (2016) Mental stress assessment using simultaneous measurement of EEG and fNIRS. Biomedical Optics Express, 7 (10). pp. 3882-3898. ISSN 21567085

Abrik, A. and Hassan, M.F.B. and Hooi, Y.K. (2016) A flexible hybrid chaining model for rule engines. Advanced Science Letters, 22 (10). pp. 2899-2904. ISSN 19366612

Adnan, M.H.M. and Hassan, M.F. (2016) Dynamic pricing for cloud service negotiation. Advanced Science Letters, 22 (10). pp. 2710-2714. ISSN 19366612

Abd Rahman, A.S. and Zakaria, M.N. and Masrom, S. (2016) Attack path selection optimization with adaptive genetic algorithms. Advanced Science Letters, 22 (10). pp. 2871-2875. ISSN 19366612

Ahmad, P. and Khandaker, M.U. and Amin, Y.M. and Muhammad, N. and Khan, G. and Khan, A.S. and Numan, A. and Rehman, M.A. and Ahmed, S.M. and Khan, A. (2016) Synthesis of hexagonal boron nitride fibers within two hour annealing at 500 °C and two hour growth duration at 1000 °C. Ceramics International, 42 (13). pp. 14661-14666. ISSN 02728842

Akbari, V. and Dehghani, M.R. and Borhani, T.N.G. and Azarpour, A. (2016) Activity Coefficient Modelling of Aqueous Solutions of Alkyl Ammonium Salts using the Extended UNIQUAC Model. Journal of Solution Chemistry, 45 (10). pp. 1434-1452. ISSN 00959782

Aljuboori, A.H.R. and Uemura, Y. and Thanh, N.T. (2016) Flocculation and mechanism of self-flocculating lipid producer microalga Scenedesmus quadricauda for biomass harvesting. Biomass and Bioenergy, 93. pp. 38-42. ISSN 09619534

Ali Shah, S.A. and Laude, A. and Faye, I. and Tang, T.B. (2016) Automated microaneurysm detection in diabetic retinopathy using curvelet transform. Journal of Biomedical Optics, 21 (10). ISSN 10833668

Ali, L. and Islam, S. and Gul, T. and Khan, I. and Dennis, L.C.C. (2016) New version of Optimal Homotopy Asymptotic Method for the solution of nonlinear boundary value problems in finite and infinite intervals. Alexandria Engineering Journal, 55 (3). pp. 2811-2819. ISSN 11100168

Assadi, M.K. and Hanaei, H. and Mohamed, N.M. and Saidur, R. and Bakhoda, S. and Bashiri, R. and Moayedfar, M. (2016) Enhancing the efficiency of luminescent solar concentrators (LSCs). Applied Physics A: Materials Science and Processing, 122 (9). ISSN 09478396

Ahmed, M.O. and Yenduri, A. and Kurian, V.J. (2016) Evaluation of the dynamic responses of truss spar platforms for various mooring configurations with damaged lines. Ocean Engineering, 123. pp. 411-421. ISSN 00298018

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. (2016) Identification of coordination factors affecting building projects performance. Alexandria Engineering Journal, 55 (3). pp. 2689-2698. ISSN 11100168

Ariffin, M.M. and Ahmad, W.F.W. and Sulaiman, S. (2016) Towards a culturally-enhanced serious game model. Journal of Theoretical and Applied Information Technology, 90 (2). pp. 95-105. ISSN 19928645

Abbasi, A. and Hashim, F.M. (2016) An intelligent optimization�based prediction model for natural gas hydrate formation in a deepwater pipeline. Petroleum Science and Technology, 34 (15). pp. 1352-1358. ISSN 10916466

Ahmed, S. and Ramli, A. and Yusup, S. (2016) CO2 adsorption study on primary, secondary and tertiary amine functionalized Si-MCM-41. International Journal of Greenhouse Gas Control, 51. pp. 230-238. ISSN 17505836

Al-Kayiem, H.H. and Huong, T.M. and Khan, J.A. (2016) Evaluation of pressure losses due to solids-in-liquid pipe flow by CFD simulation. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9908-9916. ISSN 18196608

Ali, A.S.O. and Sagayan, V. and Malik, A. and Aziz, A. (2016) Proposed face recognition system after plastic surgery. IET Computer Vision, 10 (5). pp. 342-348. ISSN 17519632

Abbas, T. and Gonfa, G. and Lethesh, K.C. and Mutalib, M.I.A. and Abai, M.B. and Cheun, K.Y. and Khan, E. (2016) Mercury capture from natural gas by carbon supported ionic liquids: Synthesis, evaluation and molecular mechanism. Fuel, 177. pp. 296-303. ISSN 00162361

Adil, M. and Zaid, H.M. and Chuan, L.K. and Latiff, N.R.A. (2016) Effect of Dispersion Stability on Electrorheology of Water-Based ZnO Nanofluids. Energy and Fuels, 30 (7). pp. 6169-6177. ISSN 08870624

Abdullah, M.A. and Nazir, M.S. and Raza, M.R. and Wahjoedi, B.A. and Yussof, A.W. (2016) Autoclave and ultra-sonication treatments of oil palm empty fruit bunch fibers for cellulose extraction and its polypropylene composite properties. Journal of Cleaner Production, 126. pp. 686-697. ISSN 09596526

Aalsalem, M.Y. and Khan, W.Z. and Saad, N.M. and Hossain, M.S. and Atiquzzaman, M. and Khan, M.K. (2016) A new random walk for replica detection in WSNs. PLoS ONE, 11 (7). ISSN 19326203

Amok, J.O.M. and Saad, N.M. (2016) Performance Analysis of Multiantenna MC DS CDMA System Over Correlated � Multipath Fading Channels. Wireless Personal Communications, 89 (2). pp. 539-568. ISSN 09296212

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and German, R.M. (2016) Powder injection molding of biocompatible stainless steel biodevices. Powder Technology, 295. pp. 84-95. ISSN 00325910

Akbar, J.U.D. and Ghazali, Z.B. (2016) The mediating influence of team alignment on the relationship between plant turnaround maintenance planning and plant turnaround maintenance performance. International Journal of Economics and Financial Issues, 6 (3). pp. 76-82. ISSN 21464138

Abualqumboz, M.S. and Malakahmad, A. and Mohammed, N.I. (2016) Greenhouse gas emissions estimation from proposed El Fukhary Landfill in the Gaza Strip. Journal of the Air and Waste Management Association, 66 (6). pp. 597-608. ISSN 10962247

Abd Majid, M.A. and Chi, T.C. and Mokhtar, A.K. (2016) Replacement analysis of amine circulation pumps. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7628-7632. ISSN 18196608

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. and Abdullah, J.M. (2016) Simultaneous EEG-fMRI for working memory of the human brain. Australasian Physical and Engineering Sciences in Medicine, 39 (2). pp. 363-378. ISSN 01589938

Asadpour, R. and Sapari, N.B. and Isa, M.H. and Kakooei, S. (2016) Acetylation of oil palm empty fruit bunch fiber as an adsorbent for removal of crude oil. Environmental Science and Pollution Research, 23 (12). pp. 11740-11750. ISSN 09441344

Altaf, K. and Rani, A.M.A. and Woldemichael, D.E. and Lemma, T.A. and Jian, C.Z. and Fiqri, M.H. (2016) Application of additive manufacturing/3D printing technologies and investment casting for prototype development of polycrystalline diamond compact (PDC) drill bit body. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6514-6518. ISSN 18196608

Ahmad, N.N.R. and Mukhtar, H. and Mohshim, D.F. and Nasir, R. and Man, Z. (2016) Effect of different organic amino cations on SAPO-34 for PES/SAPO-34 mixed matrix membranes toward CO2/CH4 separation. Journal of Applied Polymer Science, 133 (18). ISSN 00218995

Abbasi, A. and Hashim, F.M. (2016) A prediction model for the natural gas hydrate formation pressure into transmission line. Petroleum Science and Technology, 34 (9). pp. 824-831. ISSN 10916466

Alhassan, F.H. and Rashid, U. and Taufiq-Yap, Y.H. (2016) Optimization of simultaneous production of waste cooking oil based-biodiesel using iron-manganese doped zirconia-supported molybdenum oxide nanoparticles catalyst. Journal of Renewable and Sustainable Energy, 8 (3). ISSN 19417012

Augustine, A.C. and Chaudhuri, M. and Hetrick, K. (2016) Optimization of solar irradiated Fenton treatment of pesticide chlorpyrifos wastewater by response surface methodology. Environmental Earth Sciences, 75 (9). ISSN 18666280

Ali, A. and Maqsood, K. and Redza, A. and Hii, K. and Shariff, A.B.M. and Ganguly, S. (2016) Performance enhancement using multiple cryogenic desublimation based pipeline network during dehydration and carbon capture from natural gas. Chemical Engineering Research and Design, 109. pp. 519-531. ISSN 02638762

Al-Kayiem, H.H. and Aja, O.C. (2016) Historic and recent progress in solar chimney power plant enhancing technologies. Renewable and Sustainable Energy Reviews, 58. pp. 1269-1292. ISSN 13640321

Abdalla, I.I. and Ibrahim, T. and Mohd Nor, N.B. (2016) Development and optimization of a moving-magnet tubular linear permanent magnet motor for use in a reciprocating compressor of household refrigerators. International Journal of Electrical Power and Energy Systems, 77. pp. 263-270. ISSN 01420615

Ahmed Satti, I. and Wan Yusoff, W.I. and Ghosh, D. (2016) Overpressure in the Malay Basin and prediction methods. Geofluids, 16 (2). pp. 301-313. ISSN 14688115

Ahmed, A.A. and Saaid, I.M. and Md Akhir, N.A. (2016) Effect of surfactants and grafted copolymer on stability of bentonite particles dispersion in brine system. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4822-4827. ISSN 18196608

Ahmed, M.G.A. and Dennis, J.O. and Khair, M.H.M. and Rabih, A.A.S. and Mian, M.U. (2016) Characterization of embedded micro-heater and temperature sensor in a CMOS-MEMS resonator for gas sensing. International Journal of Applied Engineering Research, 11 (6). pp. 4381-4386. ISSN 09734562

Ahmed, M.G.A. and Dennis, J.O. and Khair, M.H.M. and Rabih, A.A.S. and Mian, M.U. (2016) Modeling, simulation and experimental validation of the properties of macro-scale piezoelectric cantilevers for deduction of mass sensitivity of micro-cantilevers. International Journal of Applied Engineering Research, 11 (6). pp. 4512-4520. ISSN 09734562

Ayub, T. and Shafiq, N. and Khan, S.U. (2016) Compressive stress-strain behavior of HSFRC reinforced with basalt fibers. Journal of Materials in Civil Engineering, 28 (4). ISSN 08991561

Ahmad, M.M. and Inayat, A. and Chugani, L.M. and Yusup, S. (2016) Process simulation of hydrogen production from bio-oil using iCON. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 38 (5). pp. 730-736. ISSN 15567036

Affam, A.C. and Chaudhuri, M. and Kutty, S.R.M. and Muda, K. (2016) Degradation of chlorpyrifos, cypermethrin and chlorothalonil pesticides in aqueous solution by FeGAC/H2O2 process. Desalination and Water Treatment, 57 (11). pp. 5146-5154. ISSN 19443994

Abdullah, M.A. and Ahmad, A. and Shah, S.M.U. and Shanab, S.M.M. and Ali, H.E.A. and Abo-State, M.A.M. and Othman, M.F. (2016) Integrated algal engineering for bioenergy generation, effluent remediation, and production of high-value bioactive compounds. Biotechnology and Bioprocess Engineering, 21 (2). pp. 236-249. ISSN 12268372

Alwi, A. and Mehat, M. and Arshad, N.I. (2016) E-Semai Teaching Portal (ESTP): A preliminary study in assisting the teaching of Bahasa Semai. International Journal of Advances in Soft Computing and its Applications, 8 (1). pp. 57-69. ISSN 20748523

Afzainizam, N. and Embong, A.M. and Yaacob, R.A.I.R. and Sabina, N.A.A. and Ashgaftaki, A.A. and Elsayed, M.M. (2016) Job stress among offshore personnel in oil and gas extraction industries. Indian Journal of Science and Technology, 9 (9). ISSN 09746846

Amin, H.U. and Malik, A.S. and Kamel, N. and Hussain, M. (2016) A Novel Approach Based on Data Redundancy for Feature Extraction of EEG Signals. Brain Topography, 29 (2). pp. 207-217. ISSN 08960267

Abdul Majid, N.D. and Mohd Shariff, A. and Mohamed Loqman, S. (2016) Ensuring emergency planning & response meet the minimum Process Safety Management (PSM) standards requirements. Journal of Loss Prevention in the Process Industries, 40. pp. 248-258. ISSN 09504230

Alabool, H.M. and Mahmood, A.K.B. (2016) A novel evaluation framework for improving trust level of Infrastructure as a Service. Cluster Computing, 19 (1). pp. 389-410. ISSN 13867857

Almeida, H.F.D. and Carvalho, P.J. and Kurnia, K.A. and Lopes-da-Silva, J.A. and Coutinho, J.A.P. and Freire, M.G. (2016) Surface tensions of ionic liquids: Non-regular trend along the number of cyano groups. Fluid Phase Equilibria, 409. pp. 458-465. ISSN 03783812

Affam, A.C. and Chaudhuri, M. and Kutty, S.R.M. and Muda, K. (2016) Combination of FeGAC/H2O2 advanced oxidation process and sequencing batch reactor for treatment pesticide wastewater. Environmental Earth Sciences, 75 (4). pp. 1-9. ISSN 18666280

Ahmad, M. and Jung, L.T. and Bhuiyan, M.A.-A. (2016) On fuzzy semantic similarity measure for DNA coding. Computers in Biology and Medicine, 69. pp. 144-151. ISSN 00104825

Abdul Mannan, H. and Mukhtar, H. and Shima Shaharun, M. and Roslee Othman, M. and Murugesan, T. (2016) Polysulfone/poly(ether sulfone) blended membranes for CO2 separation. Journal of Applied Polymer Science, 133 (5). ISSN 00218995

Alhussian, H. and Zakaria, N. and Patel, A. (2016) An unfair semi-greedy real-time multiprocessor scheduling algorithm. Computers and Electrical Engineering, 50. pp. 143-165. ISSN 00457906

Abdul Latiff, A.H. (2016) Shallow gas cloud illumination analysis by the focal beam method. Journal of Geophysics and Engineering, 13 (1). pp. 96-108. ISSN 17422132

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Non-linear Finite Element Analysis of Nanotubes. Engineering Materials. pp. 107-131. ISSN 16121317

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Influence of Defects on the Strength of Graphene and Carbon Nanotube. Engineering Materials. pp. 165-173. ISSN 16121317

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Linear Finite Element Analysis of Nanotubes. Engineering Materials. pp. 63-106. ISSN 16121317

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Nanotubes. Engineering Materials. pp. 1-13. ISSN 16121317

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Interatomic Bonding. Engineering Materials. pp. 15-25. ISSN 16121317

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Finite Element Modeling of Nanotubes. Engineering Materials. pp. 27-46. ISSN 16121317

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Nanotube Modeling Using Beam Element. Engineering Materials. pp. 47-61. ISSN 16121317

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Effect of Geometrical Parameters on Tensile Properties of Nanotubes. Engineering Materials. pp. 133-155. ISSN 16121317

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Finite Element Analysis of Multi-walled Nanotubes. Engineering Materials. pp. 157-163. ISSN 16121317

Awang, M. and Mohammadpour, E. and Muhammad, I.D. (2016) Mechanical Behavior of Carbon Nanotube-Reinforced Polymer Composites. Engineering Materials. pp. 175-212. ISSN 16121317

Al-Azawiey, S.S. and Hassan, S.B. (2016) Heat absorption properties of ground material for solar chimney power plants. International Journal of Energy Production and Management, 1 (4). pp. 403-418. ISSN 20563272

Al-Kayiem, H.H. (2016) Hybrid techniques to enhance solar thermal: The way forward. International Journal of Energy Production and Management, 1 (1). pp. 50-60. ISSN 20563272

Ali, A.M. and Padmanabhan, E. and Baioumy, H. (2016) Surface characterization of goethite-humate chelations complexated with quartz. Petroleum and Coal, 58 (6). pp. 668-675. ISSN 13377027

Abdullah, A.Z. and Gholami, Z. and Ayoub, M. and Gholami, F. (2016) Selective monolaurin synthesis through esterification of glycerol using sulfated zirconia-loaded SBA-15 catalyst. Chemical Engineering Communications, 203 (4). pp. 496-504. ISSN 00986445

Azmi, N. and Rashidi, N.A. and Yusup, S. and Sabil, K.M. (2016) Addition of water in calcium based adsorbent for CO2 adsorption: Experimental and isotherm modelling studies. Chemical Engineering Transactions, 52. pp. 73-78. ISSN 22839216

Al-Kayiem, H.H. and Khan, J.A. (2016) CFD simulation of drag reduction in pipe flow by turbulence energy promoters. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14219-14224. ISSN 18196608

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2016) Energy absorption capability of aluminium tube partially wrapped with glass/epoxy subjected to quasi-static loading. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14313-14318. ISSN 18196608

Abdul Karim, Z.A. and Aiman, M.H. and Khan, M.Y. (2016) Efficacy of water-in-diesel emulsion to reduce exhaust gas pollutants of diesel engine. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14284-14289. ISSN 18196608

Amirul Syamin Mad Jeli, M. and Kee, K.E. and Hassan, S. and Ismail, M.C. (2016) Compatibilty study of thermoplastics in ron97 gasoline blended with ethanol. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14214-14218. ISSN 18196608

Amare, D.F. and Aklilu, T.B. and Gilani, S.I. (2016) Effects of performance deterioration on gas path measurements in an industrial gas turbine. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14202-14207. ISSN 18196608

Albarody, T.M.B. and Taufiq, M.B. (2016) Technical acceptance assurance limit of ifl� pipelines. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14248-14252. ISSN 18196608

Adam, I.K. and Aziz, A.R.A. and Yusuf, S. (2016) Response surface methodology optimization of palm rubber seed combined oil based biodiesel and idi diesel engine performance and emission. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14195-14201. ISSN 18196608

Aniza, N. and Hassan, S. and Inayat, M. (2016) Thermogravimetric kinetic analysis of Malaysian poultry processing waste material under inert and oxidative atmospheres. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 1943-1955. ISSN 22894659

Akilu, S. and Baheta, A.T. and Sharma, K.V. and Vandragi, S.K. (2016) Properties of silica nanofluid in glycerol-ethylene glycol mixture as base liquid. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13019-13024. ISSN 18196608

Abd Majid, M.A. and Nakamura, T. and Xiaoming, Z. and Nordin, A. (2016) Effect of irreversibility on COP of double effect steam absorption chillers. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12979-12983. ISSN 18196608

Alkali, A.U. and Ginta, T.L. and Abdulrani, A.M. and Fawad, H. and Yasir, M. and Danish, M. (2016) Study of tool life of uncoated WC-Co insert during flame assisted machining of 316L stainless steel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13441-13447. ISSN 18196608

Ali, B.H. and Gilani, S.I. and Al-Kayiem, H.H. and Khlief, A.K. (2016) Dual axis tracking model for a heliostat field solar tower heat flux investigation. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13344-13347. ISSN 18196608

Arifin, M.H. and Jamaluddin, T.A. and Husin, H. and Ismail, A. and Abbas, A.A. and Nordin, M.N.M. and Baioumy, H.M. and Kayode, J.S. and Ismail, N. and Othman, N.A. and Setu, A. and Sulaiman, M.A.A. (2016) Comparison of geological mapping with electrical resistivity and ground penetration radar methods for rock fractured system study. Chiang Mai Journal of Science, 43 (6Speci). pp. 1346-1357. ISSN 01252526

Ahmed, F.A. and Elraies, A.K. and Ayoub, A.M. and Gaafar, R.G. (2016) An experimental investigation on the impact of brine composition on silica solubility at high temperature. International Journal of Mechanics, 10. pp. 23-26. ISSN 19984448

Andriamihaja, S. and Padmanabhan, E. and Ben-Awuah, J. (2016) Characterization of pore systems in carbonate using 3D X -ray computed tomography. Petroleum and Coal, 58 (4). pp. 507-516. ISSN 13377027

Askalany, A. and Habib, K. and Ghazy, M. and Assadi, M.K. (2016) Adsorption cooling system employing activated carbon/ hfc410a adsorption pair. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12253-12257. ISSN 18196608

Ahmed, U. and Hussin, H. and Muhammad, M. (2016) Comprehensive data collection for root cause failure analysis in oil and gas industries. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12153-12158. ISSN 18196608

Al-Hashimy, Z.I. and Al-Kayiem, H.H. and Time, R.W. (2016) Experimental investigation on the vibration induced by slug flow in horizontal pipe. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12134-12139. ISSN 18196608

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. and Rao, T.V.V.L.N. and Pedapati, S.R. (2016) Application of nano aluminum in modified EDM: pmedm. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12117-12121. ISSN 18196608

Arshad, S.A. and Tuan Ya, T.M.Y.S. and Sabir, O. (2016) Decomposed dicom video into frames using matlab. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12070-12072. ISSN 18196608

Arogundade, A.I. and Megat-Yusoff, P.S.M. and Ahmad, F. and Bhat, A.H. and Gillani, Q.F. (2016) Effect of bauxite residue loading on heat shielding performance of an ammonium polyphosphate based epoxy intumescent system. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12165-12169. ISSN 18196608

Al-Azawiey, S.S. and Al-Kayiem, H.H. and Hassan, S.B. (2016) Investigation on the influnce of collector height on the performance of solar chimney power plant. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12197-12201. ISSN 18196608

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Rafi Raza, M. (2016) Low pressure injection molding of boron admixed 316l stainless steel for engineering applications. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11960-11965. ISSN 18196608

Abd Karim, M.A. and Che Ismail, M. and Abd Karim, M.F. (2016) Performance of corrosion inhibitor with sand deposit in co2 environment. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12103-12107. ISSN 18196608

Assadi, M.K. and Zahraee, S.M. and Isaabadi, M.H.Z. and Habib, K. (2016) Evaluating different scenarios for optimizing energy consumption to achieve sustainable green building in malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12112-12116. ISSN 18196608

Anuar, S.B.S. and Ismail, M.C. and Raja, P.B. and Rahman, N.A.B.A. (2016) Condensation rate effect on top of line corrosion in CO2 environment. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12058-12063. ISSN 18196608

Abdul-Wahhab, H.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2016) CFD simulation of bubbly diesel-cng flow in a horizantal pipe under the influence of a magnetic field. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12122-12127. ISSN 18196608

Amir, N. and Jalil, A.N.A. and Ahmad, F. (2016) Characterization and study of char performance of glass wool and rockwool hybrid fibre reinforced intumescent coatings. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12268-12274. ISSN 18196608

Aurybi, M.A. and Al-Kayiem, H.H. and Gilani, S.I.U. and Ismaeel, A.A. (2016) Mathematical modeling to evaluate the performance enhancement of solar updraft power plant by external heat source. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12128-12133. ISSN 18196608

Al-Wakeel, H.B. and Karim, Z.A.A. (2016) Study on the effect of inserting multi-electrodes in a material exposed to electromagnetic wave. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12064-12069. ISSN 18196608

Afrooz, I.E. and Sinnathambi, C.M. and Karuppanan, S. and Ching, D.L.C. (2016) CFD simulation of bubbling fluidized bed: Effect of distributor plate orifice pattern configuration on hydrodynamics of gas-solid mixing. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11954-11959. ISSN 18196608

Al-Hashimy, Z.I. and Al-Kayiem, H.H. and Time, R.W. and Kadhim, Z.K. (2016) Numerical characterisation of slug flow in horizontal air/water pipe flow. International Journal of Computational Methods and Experimental Measurements, 4 (2). pp. 114-130. ISSN 20460546

Awang, M. and Ismail, A. and Zaman, M.A.K. (2016) Effect of process parameters on the strength of swept friction stir spot welded plates. Advanced Structured Materials, 61. pp. 105-110. ISSN 18698433

Adawiyah, N. and Moniruzzaman, M. and Hawatulaila, S. and Goto, M. (2016) Ionic liquids as a potential tool for drug delivery systems. MedChemComm, 7 (10). pp. 1881-1897. ISSN 20402503

Abbasi, A.Z. and Ting, D.H. and Hlavacs, H. (2016) A revisit of the measurements on engagement in videogames: A new scale development. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9926 L. pp. 247-252. ISSN 03029743

Abbasi, A.Z. and Ting, D.H. and Hlavacs, H. (2016) Proposing a new conceptual model predicting consumer videogame engagement triggered through playful-consumption experiences. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9926 L. pp. 126-134. ISSN 03029743

Ahmad, F. and Draz, M.U. and Yang, S.-C. (2016) A novel study on OFDI and home country exports: implications for the ASEAN region. Journal of Chinese Economic and Foreign Trade Studies, 9 (2). pp. 131-145. ISSN 17544416

Abdul Karim, S.A. and Voon Pang, K. (2016) Shape preserving interpolation using C2 rational cubic spline. Journal of Applied Mathematics, 2016. ISSN 1110757X

Ameen, M. and Azizan, M.T. and Yusup, S. and Ramli, A. and Yasir, M. and Jais, K.A. and Sa'aid, M.H. (2016) Effects of ultrasound irradiation on synthesis of solid acid catalysts. Key Engineering Materials, 701. pp. 67-72. ISSN 10139826

Ali, W. and Abdullah, A. and Azam, M. (2016) The dynamic linkage between technological innovation and carbon dioxide emissions in Malaysia: An autoregressive distributed lagged bound approach. International Journal of Energy Economics and Policy, 6 (3). pp. 389-400. ISSN 21464553

Alkali, A.U. and Ginta, T.L. and Abdulrani, A.M. and Fawad, H. and Danish, M. (2016) Study on the machinability of 316L stainless steel using flame assisted machining. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8743-8749. ISSN 18196608

Ahmad, A. and Buang, A. and Bhat, A.H. (2016) Renewable and sustainable bioenergy production from microalgal co-cultivation with palm oil mill effluent (POME): A review. Renewable and Sustainable Energy Reviews, 65. pp. 214-234. ISSN 13640321

Adil, M. and Zaid, H.M. and Chuan, L.K. and Latiff, N.R.A. (2016) Designing and experimental validation of an electromagnetic setup at MHZ frequency under different propagation media. Lecture Notes in Electrical Engineering, 379. pp. 41-50. ISSN 18761100

Arif, N.N.M. and Vo, D.-V.N. and Azizan, M.T. and Abidin, S.Z. (2016) Carbon dioxide dry reforming of glycerol for hydrogen production using Ni/ZrO2 and Ni/CaO as catalysts. Bulletin of Chemical Reaction Engineering and Catalysis, 11 (2). pp. 200-209. ISSN 19782993

Andriamihaja, S. and Padmanabhan, E. and Ben-Awuah, J. and Sokkalingam, R. (2016) Modeling the impacts of petrophysical and textural parameters on dissolution of carbonate rocks at 25°C, 50°C, and 75°C. Petroleum and Coal, 58 (3). pp. 359-367. ISSN 13377027

Ali, A.M. and Padmanabhan, E. and Baioumy, H. (2016) Petrographic and microtextural analyses of miocene sandstones of onshore West Baram delta province, Sarawak basin: Implications for porosity and reservoir rock quality. Petroleum and Coal, 58 (2). pp. 162-184. ISSN 13377027

Adil, M. and Zaid, H.M. and Chuan, L.K. and Latiff, N.R.A. (2016) Influence of electromagnetic waves on viscosity and electrorheology of dielectric nanofluids-scale-based approach. Jurnal Teknologi, 78 (6-4). pp. 49-54. ISSN 01279696

Ahmad, I. and Awang, M. and Sufian, S. and Irfan Khan, M. and Mumtazb, M. (2016) Effect of ball milling of fly ash particle size on foam stabilization for EOR applications. Jurnal Teknologi, 78 (6-7). pp. 115-119. ISSN 01279696

Adil, M. and Zaid, H.M. and Chuan, L.K. and Latiff, N.R.A. (2016) Effect of annealing temperature on phase transition of nano-alumina synthesized by auto-combustion route. Journal of Nano Research, 41. pp. 74-86. ISSN 16625250

Aigbogun, O. and Ghazali, Z. and Razali, R. (2016) The mediating impact of Halal logistics on supply chain resilience: An agency perspective. International Review of Management and Marketing, 6 (4). pp. 209-216. ISSN 21464405

Ali, S. and Shariff, A.M. (2016) An integrated conceptual framework for proactive improvement of safety culture. International Review of Management and Marketing, 6 (4). pp. 120-124. ISSN 21464405

Ahmad, F. and Draz, M.U. and Yang, S.-C. (2016) Foreign portfolio inflows and economic growth: Evidence from ASEAN5. Actual Problems of Economics, 179 (5). pp. 57-69. ISSN 19936788

Ahmad, A. and Shah, S.M.U. and Buang, A. and Abdullah, M.A. (2016) Anaerobic co-cultivation of multi-algal species with oil palm empty fruit bunches for mill effluent treatment and biomethane production. Jurnal Teknologi, 78 (5-6). pp. 65-73. ISSN 01279696

Ayoub, M. and Ullah, S. and Inayat, A. and Mahmood, S.M. (2016) Investigation of biodiesel-drive glycerol conversion to polyglycerol over basic modified AlPC catalyst. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2668-2672. ISSN 18196608

Aldabbagh, G. and Rehan, M. and Hasbullah, H. and Rehan, W. and Chughtai, O. (2016) A driver safety information broadcast protocol for VANET. Applied Mathematics and Information Sciences, 10 (2). pp. 451-468. ISSN 19350090

Ayodele, O.B. and Lethesh, K.C. and Gholami, Z. and Uemura, Y. (2016) Effect of ethanedioic acid functionalization on Ni/Al2O3 catalytic hydrodeoxygenation and isomerization of octadec-9-enoic acid into biofuel: Kinetics and Arrhenius parameters. Journal of Energy Chemistry, 25 (1). pp. 158-168. ISSN 20954956

Al-Wakeel, H.B. and Karim, Z.A.A. and Al-Kayiem, H.H. (2016) A technique for localized rapid soot oxidation using metal aided microwave radiation. IEEE Transactions on Microwave Theory and Techniques, 64 (1). pp. 37-43. ISSN 00189480

Abdalla, I.I. and Ibrahim, T.B. and Nor, N.M. (2016) A study on different topologies of the tubular linear permanent magnet motor designed for linear reciprocating compressor applications. Applied Computational Electromagnetics Society Journal, 31 (1). pp. 85-91. ISSN 10544887

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Abdul Khalil, H.P.S. and Raza, M.R. (2016) Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks. Advances in Materials Science and Engineering, 2016. ISSN 16878434

Ali, Z. and Alsulaiman, M. and Elamvazuthi, I. and Muhammad, G. and Mesallam, T.A. and Farahat, M. and Malki, K.H. (2016) Voice pathology detection based on the modified voice contour and SVM. Biologically Inspired Cognitive Architectures, 15. pp. 10-18. ISSN 2212683X

Akbar, M.M. and Chemat, F. and Arunagiri, A. and Murugesan, T. (2016) Density and excess properties of N-methyldiethanolamine (MDEA) with 1-hexyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate hmimFAP. Journal of Thermal Analysis and Calorimetry, 123 (1). pp. 785-791. ISSN 13886150

Abdul, A.H. (2016) Development of soil formation corresponding to cyclic stress - derived shear strain function based on stratum index factor. International Journal of GEOMATE, 10 (2). pp. 1730-1736. ISSN 21862982

Ali, Z. and Elamvazuthi, I. and Alsulaiman, M. and Muhammad, G. (2016) Detection of Voice Pathology using Fractal Dimension in a Multiresolution Analysis of Normal and Disordered Speech Signals. Journal of Medical Systems, 40 (1). pp. 1-10. ISSN 01485598

Ahmad, A.A. and Zawawi, N.A. and Kasim, F.H. and Inayat, A. and Khasri, A. (2016) Assessing the gasification performance of biomass: A review on biomass gasification process conditions, optimization and economic evaluation. Renewable and Sustainable Energy Reviews, 53. pp. 1333-1347. ISSN 13640321

Azmi, W.H. and Sharma, K.V. and Mamat, R. and Najafi, G. and Mohamad, M.S. (2016) The enhancement of effective thermal conductivity and effective dynamic viscosity of nanofluids - A review. Renewable and Sustainable Energy Reviews, 53. pp. 1046-1058. ISSN 13640321

B

Bataee, M. and Irawan, S. and Ridha, S. (2016) Wellbore stability model based on iterative coupling method in water alternating gas injection. Journal of Petroleum Exploration and Production Technology, 6 (4). pp. 755-775. ISSN 21900558

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Kakooei, S. and Khatani, M. and Gholami, Z. (2016) Optimization hydrogen production over visible light-driven titania-supported bimetallic photocatalyst from water photosplitting in tandem photoelectrochemical cell. Renewable Energy, 99. pp. 960-970. ISSN 09601481

Bahari, M.B. and Phuc, N.H.H. and Abdullah, B. and Alenazey, F. and Vo, D.-V.N. (2016) Ethanol dry reforming for syngas production over Ce-promoted Ni/Al2O3 catalyst. Journal of Environmental Chemical Engineering, 4 (4). pp. 4830-4838. ISSN 22133437

Bokhari, A. and Chuah, L.F. and Yusup, S. and Klemeš, J.J. and Akbar, M.M. and Kamil, R.N.M. (2016) Cleaner production of rubber seed oil methyl ester using a hydrodynamic cavitation: optimisation and parametric study. Journal of Cleaner Production, 136. pp. 31-41. ISSN 09596526

Bavoh, C.B. and Lal, B. and Nashed, O. and Khan, M.S. and Keong, L.K. and Bustam, M.A. (2016) COSMO-RS: An ionic liquid prescreening tool for gas hydrate mitigation. Chinese Journal of Chemical Engineering, 24 (11). pp. 1619-1624. ISSN 10049541

Babangida, N.M. and Mustafa, M.R.U. and Yusuf, K.W. and Isa, M.H. (2016) Prediction of pore-water pressure response to rainfall using support vector regression Prédiction de la réponse de la pression de l�eau interstitielle à la pluie en utilisant la régression à vecteurs de support Predição da resposta da pressão da água no poro à chuva usando regressão por vetores de suporte Predicción de la respuesta de la presión del agua intersticial a la precipitación mediante regresión de vectores de soporte. Hydrogeology Journal, 24 (7). pp. 1821-1833. ISSN 14312174

Baig, M.K. and Atiq, S. and Bashir, S. and Riaz, S. and Naseem, S. and Soleimani, H. and Yahya, N. (2016) Pulsed laser deposition of SmCo thin films for MEMS applications. Journal of Applied Research and Technology, 14 (5). pp. 287-292. ISSN 16656423

Biyanto, T.R. and Ramasamy, M. and Jameran, A.B. and Fibrianto, H.Y. (2016) Thermal and hydraulic impacts consideration in refinery crude preheat train cleaning scheduling using recent stochastic optimization methods. Applied Thermal Engineering, 108. pp. 1436-1450. ISSN 13594311

Baioumy, H. and Ulfa, Y. and Nawawi, M. and Padmanabhan, E. and Anuar, M.N.A. (2016) Mineralogy and geochemistry of Palaeozoic black shales from Peninsular Malaysia: Implications for their origin and maturation. International Journal of Coal Geology, 165. pp. 90-105. ISSN 01665162

Belachew, C.T. and Mokhtar, C.I. and Karuppanan, S. (2016) Strength assessment of a corroded pipeline through the burst test: Case study. Journal of Pipeline Systems Engineering and Practice, 7 (3). 04016003. ISSN 19491190

Budhathoki, M. and Barnee, S.H.R. and Shiau, B.-J. and Harwell, J.H. (2016) Improved oil recovery by reducing surfactant adsorption with polyelectrolyte in high saline brine. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 498. pp. 66-73. ISSN 09277757

Babiker, M.E. and Aziz, A.R.A. and Heikal, M. and Yusup, S. and Hagos, F.Y. (2016) Experimental and simulation study on steam gasification of phoenix-dactylifera date palm seeds. International Journal of Automotive and Mechanical Engineering, 13 (1). pp. 3201-3214. ISSN 22298649

Baioumy, H. and Ulfa, Y. (2016) Facies analysis of the Semanggol Formation, South Kedah, Malaysia: A possible Permian�Triassic boundary section. Arabian Journal of Geosciences, 9 (8). ISSN 18667511

Biyanto, T.R. and Kusuma, F. and Musyafa, A. and Noriyati, R.D. and Bayuaji, R. and da Costa, S. and Irawan, S. (2016) Correction factor determination on failure rate equation of MacLaurin series for low and high mode application. Ain Shams Engineering Journal, 7 (2). pp. 827-834. ISSN 20904479

Bhutto, A.W. and Abro, R. and Gao, S. and Abbas, T. and Chen, X. and Yu, G. (2016) Oxidative desulfurization of fuel oils using ionic liquids: A review. Journal of the Taiwan Institute of Chemical Engineers, 62. pp. 84-97. ISSN 18761070

Bashir, M.J.K. and Mau Han, T. and Jun Wei, L. and Choon Aun, N. and Abu Amr, S.S. (2016) Polishing of treated palm oil mill effluent (POME) from ponding system by electrocoagulation process. Water Science and Technology, 73 (11). pp. 2704-2712. ISSN 02731223

Baioumy, H. (2016) Factors controlling the geochemical variations of lateritic bauxites formed upon different parent rocks in Peninsular Malaysia. Arabian Journal of Geosciences, 9 (6). ISSN 18667511

Bargshady, G. and Zahraee, S.M. and Ahmadi, M. and Parto, A. (2016) The effect of information technology on the agility of the supply chain in the Iranian power plant industry. Journal of Manufacturing Technology Management, 27 (3). pp. 427-442. ISSN 1741038X

Borhani, T.N.G. and Afkhamipour, M. and Azarpour, A. and Akbari, V. and Emadi, S.H. and Manan, Z.A. (2016) Modeling study on CO2 and H2S simultaneous removal using MDEA solution. Journal of Industrial and Engineering Chemistry, 34. pp. 344-355. ISSN 1226086X

Basrawi, F. and Ibrahim, T.K. and Habib, K. and Yamada, T. (2016) Effect of operation strategies on the economic and environmental performance of a micro gas turbine trigeneration system in a tropical region. Energy, 97. pp. 262-272. ISSN 03605442

Bahloul, M.R. and Yusoff, M.Z. and Abdel-Aty, A.-H. and Saad, M.N.M. and Al-Jemeli, M. (2016) Modulation classification for MIMO systems: State of the art and research directions. Chaos, Solitons and Fractals, 89. pp. 497-505. ISSN 09600779

Bhat, A.H. and Khan, I. and Amil Usmani, M. and Rather, J.A. (2016) Bioplastics and Bionanocomposites Based on Nanoclays and Other Nanofillers. Engineering Materials. pp. 115-139. ISSN 16121317

Bilad, M.R. (2016) Module-scale simulation of forward osmosis module-part A: Plate-and-frame. Indonesian Journal of Science and Technology, 1 (2). pp. 249-261. ISSN 25281410

Bahloul, M.R. and Yusoff, M.Z. and Abdel-Aty, A.-H. and Saad, M.N.M. (2016) An efficient likelihood-based modulation classification algorithm for multiple-input multiple-output systems. Journal of Computational and Theoretical Nanoscience, 13 (11). pp. 7879-7885. ISSN 15461955

Bokhari, A. and Yusup, S. and Chuah, L.F. and Kamil, R.N.M. (2016) Relative efficiency of esterified rubber seed oil in a hydrodynamic cavitation reactor and purification via distillation column. Chemical Engineering Transactions, 52. pp. 775-780. ISSN 22839216

Beheshti, M. and Kakooei, S. and Ismail, M.C. and Shahrestani, S. (2016) Design and implementation of scanning electrochemical microscopy (SECM) for scanning open circuit potential system on damaged coated surfaces. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14299-14302. ISSN 18196608

Bin Iman, H. and Pao, W. (2016) Various mathematical model of torsional vibration in oil well drill string and their validation techniques. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13389-13391. ISSN 18196608

Babiker, M.E. and Aziz, A.R.A. and Heikal, M.R. and Yusup, S. and Adam, A. (2016) Effects of enhancing cetane number of ethanol fumigation on diesel engine performance and emissions. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12994-12999. ISSN 18196608

Baheta, A.T. and Sidahmed, M. and Suleiman, S.A. and Fentaye, A.D. and Ghazali, S.A.S. (2016) Development and validation of a twin shaft industrial gas turbine performance model. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13365-13371. ISSN 18196608

Bhaskoro, P.T. and Japper-Jaafar, A. and Zainalabidin, M.A.F. and Chunhaur, L. (2016) The role and effect of aeration on combined demulsification process for stubborn water-in-oil emulsion from slop oil tank. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13025-13030. ISSN 18196608

Ben-Awuah, J. and Padmanabhan, E. and Andriamihaja, S. and Amponsah, P.O. and Ibrahim, Y. (2016) Petrophysical and reservoir characteristics of sedimentary rocks from offshore west Baram Delta, Sarawak Basin, Malaysia. Petroleum and Coal, 58 (4). pp. 414-429. ISSN 13377027

Ben-Awuah, J. and Padmanabhan, E. (2016) Application of attenuated total reflectance-fourier transform infrared spectroscopy (ATR-FTIR) to evaluate impact of rock heterogeneities on hydrocarbon distribution in deltaic reservoir sandstones. Petroleum and Coal, 58 (4). pp. 522-538. ISSN 13377027

Baig, Z. and Mamat, O. and Mustapha, M. and Altaf, K. and Mailabari, R.J. (2016) Graphene nanoplatelets (GNPS) exfoliation and dispersion in metal powder using different solvents. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12023-12028. ISSN 18196608

Burhani, N.R.A. and Muhammad, M. and Ismail, M.C. and Mahed, M.A. (2016) An experimental analysis using taguchi method in resolving the significant factors subject to corrosion under insulation. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11966-11970. ISSN 18196608

Bargshady, G. and Chegeni, A. and Kamranvand, S. and Zahraee, S.M. (2016) A relational study of supply chain agility and firms� performance in the services providers. International Review of Management and Marketing, 6 (4). pp. 38-42. ISSN 21464405

Bano, S. and Sharif, M.A.M. (2016) Metrosexual: Emerging and lucrative segment for marketers. International Review of Management and Marketing, 6 (4). pp. 114-119. ISSN 21464405

Bokhari, A. and Chuah, L.F. and Yusup, S. and Klemeš, J.J. and Kamil, R.N.M. (2016) Optimisation on pretreatment of rubber seed (Hevea brasiliensis) oil via esterification reaction in a hydrodynamic cavitation reactor. Bioresource Technology, 199. pp. 414-422. ISSN 09608524

Badri-Harun, A. and Radzi Zainol, M. and Amar, A. and Shaari, Z.H. (2016) Emotional intelligence as mediator between leadership styles and leadership effectiveness: A theoretical framework. International Review of Management and Marketing, 6 (1). pp. 116-121. ISSN 21464405

Bamatraf, S. and Hussain, M. and Aboalsamh, H. and Qazi, E.-U.-H. and Malik, A.S. and Amin, H.U. and Mathkour, H. and Muhammad, G. and Imran, H.M. (2016) A System for True and False Memory Prediction Based on 2D and 3D Educational Contents and EEG Brain Signals. Computational Intelligence and Neuroscience, 2016. ISSN 16875265

C

Chakraborty, A. and Chakraborty, S. and Chaudhuri, B. and Bhattacharjee, S. (2016) Process engineering studies on gold nanoparticle formation via dynamic spectroscopic approach. Gold Bulletin, 49 (3-4). pp. 75-85. ISSN 00171557

Chughtai, O. and Badruddin, N. and Awang, A. and Rehan, M. (2016) Congestion-aware and traffic load balancing scheme for routing in WSNs. Telecommunication Systems, 63 (4). pp. 481-504. ISSN 10184864

Chuah, L.F. and Mohd Amin, M. and Yusup, S. and Raman, N.A. and Bokhari, A. and Klemeš, J.J. and Alnarabiji, M.S. (2016) Influence of green catalyst on transesterification process using ultrasonic-assisted. Journal of Cleaner Production, 136. pp. 14-22. ISSN 09596526

Chai, Y.H. and Yusup, S. and Chok, V.S. and Arpin, M.T. and Irawan, S. (2016) Investigation of thermal conductivity of multi walled carbon nanotube dispersed in hydrogenated oil based drilling fluids. Applied Thermal Engineering, 107. pp. 1019-1025. ISSN 13594311

Chan, Y.H. and Tan, R.R. and Yusup, S. and Lam, H.L. and Quitain, A.T. (2016) Comparative life cycle assessment (LCA) of bio-oil production from fast pyrolysis and hydrothermal liquefaction of oil palm empty fruit bunch (EFB). Clean Technologies and Environmental Policy, 18 (6). pp. 1759-1768. ISSN 1618954X

Cheng Ying, Y. and Ab-Samat, H. and Kamaruddin, S. (2016) Practical production layout design for multi-product and small-lot-size production: A case study. Jurnal Teknologi, 78 (7). pp. 161-175. ISSN 01279696

Chuah, L.F. and Bokhari, A. and Yusup, S. and Klemeš, J.J. and Abdullah, B. and Akbar, M.M. (2016) Optimisation and Kinetic Studies of Acid Esterification of High Free Fatty Acid Rubber Seed Oil. Arabian Journal for Science and Engineering, 41 (7). pp. 2515-2526. ISSN 2193567X

Chen, X. and Pao, W. and Thornton, S. and Small, J. (2016) Unsaturated hydro-mechanical-chemical constitutive coupled model based on mixture coupling theory: Hydration swelling and chemical osmosis. International Journal of Engineering Science, 104. pp. 97-109. ISSN 00207225

Chatha, S.A.S. and Hussain, A.I. and Ali, S. and Saif, M.J. and Mallhi, A.I. and Sagir, M. and Naz, M.Y. (2016) Significance of chitosan to improve the substantivity of reactive dyes. Journal of the Chilean Chemical Society, 61 (2). pp. 2895-2897. ISSN 07179324

Chemat, F. and Anjum, H. and Shariff, A.M. and Kumar, P. and Murugesan, T. (2016) Thermal and physical properties of (Choline chloride + urea + l-arginine) deep eutectic solvents. Journal of Molecular Liquids, 218. pp. 301-308. ISSN 01677322

Cong, T.Y. and Raj, A. and Chanaphet, J. and Mohammed, S. and Ibrahim, S. and Al Shoaibi, A. (2016) A detailed reaction mechanism for hydrogen production via hydrogen sulphide (H2S) thermolysis and oxidation. International Journal of Hydrogen Energy, 41 (16). pp. 6662-6675. ISSN 03603199

Chung, T.D. and Ibrahim, R.B. and Asirvadam, V.S. and Saad, N.B. and Hassan, S.M. (2016) Adopting EWMA Filter on a Fast Sampling Wired Link Contention in WirelessHART Control System. IEEE Transactions on Instrumentation and Measurement, 65 (4). pp. 836-845. ISSN 00189456

Chin, S.C. and Shafiq, N. and Nuruddin, M.F. (2016) Behaviour of RC beams with CFRP-strengthened openings. Structural Concrete, 17 (1). pp. 32-43. ISSN 14644177

Carcione, J.M. and Almalki, H.S. and Qadrouh, A.N. (2016) Geophone-ground coupling with flat bases. Geophysical Prospecting, 64 (2). pp. 255-267. ISSN 00168025

Cheu, S.C. and Kong, H. and Song, S.T. and Johari, K. and Saman, N. and Che Yunus, M.A. and Mat, H. (2016) Separation of dissolved oil from aqueous solution by sorption onto acetylated lignocellulosic biomass - Equilibrium, kinetics and mechanism studies. Journal of Environmental Chemical Engineering, 4 (1). pp. 864-881. ISSN 22133437

Chuah, L.F. and Yusup, S. and Aziz, A.R.A. and Klemeš, J.J. and Bokhari, A. and Abdullah, M.Z. (2016) Influence of fatty acids content in non-edible oil for biodiesel properties. Clean Technologies and Environmental Policy, 18 (2). pp. 473-482. ISSN 1618954X

Chandran, K. and Krishnan, S. and Sinnathambi, C.M. (2016) Development of demulsifier for Malaysian crude oil - Effect of ASP and polymer flooding. International Journal of Applied Chemistry, 12 (4). pp. 753-760. ISSN 09731792

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Wan, W.A.K. (2016) Investigation of convective heat transfer coefficient and initial temperature of waxy crude oil on the formation of voids. International Journal of Automotive and Mechanical Engineering, 13 (3). pp. 3754-3762. ISSN 22298649

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. and Herman, A.P. (2016) Effect of temperature on catalytic steam co-gasification of rubber seed shells and plastic HDPE residues. Chemical Engineering Transactions, 52. pp. 577-582. ISSN 22839216

Chandrakasan, G. and Ovinis, M. (2016) Investigation on thermocompression bonding using lead free sinterable paste and high lead solder paste for high power led packaging. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14332-14337. ISSN 18196608

Chouhan, M. and Hasbullah, H. (2016) Defense against Cache-Based Side Channel Attacks for secure cloud computing. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13146-13152. ISSN 18196608

Chew, T.L. and Lim, J.W. and Ahmad, A.L. (2016) Ba-SAPO-34 zeolite membrane for CO2 and N2 permeation Resapan gas CO2 dan N2 melalui membran zeolit Ba-SAPO-34. Malaysian Journal of Analytical Sciences, 20 (6). pp. 1397-1404. ISSN 13942506

Chuah, L.F. and Aziz, A.R.A. and Yusup, S. and Klemeš, J.J. and Bokhari, A. (2016) Waste cooking oil biodiesel via hydrodynamic cavitation on a diesel engine performance and greenhouse gas footprint reduction. Chemical Engineering Transactions, 50. pp. 301-306. ISSN 22839216

Carvalho, P.J. and Kurnia, K.A. and Coutinho, J.A.P. (2016) Dispelling some myths about the CO2 solubility in ionic liquids. Physical Chemistry Chemical Physics, 18 (22). pp. 14757-14771. ISSN 14639076

Chuah, L.F. and Yusup, S. and Abd Aziz, A.R. and Bokhari, A. and Abdullah, M.Z. (2016) Cleaner production of methyl ester using waste cooking oil derived from palm olein using a hydrodynamic cavitation reactor. Journal of Cleaner Production, 112. pp. 4505-4514. ISSN 09596526

Cheu, S.C. and Kong, H. and Song, S.T. and Saman, N. and Johari, K. and Mat, H. (2016) High removal performance of dissolved oil from aqueous solution by sorption using fatty acid esterified pineapple leaves as novel sorbents. RSC Advances, 6 (17). pp. 13710-13722. ISSN 20462069

Chong, S.L. (2016) Re-thinking aliteracy: When undergraduates surrender their reading choices. Literacy, 50 (1). pp. 14-22. ISSN 17414350

D

Dass, S.C. (2016) Comment on article by chkrebtii, campbell, calderhead, and girolami. Bayesian Analysis, 11 (4). pp. 1275-1277. ISSN 19360975

Dennis, J.O. and Ahmad, F. and Khir, M.H.B.M. and Hamid, N.H.B. (2016) Post micromachining of MPW based CMOS�MEMS comb resonator and its mechanical and thermal characterization. Microsystem Technologies, 22 (12). pp. 2909-2919. ISSN 09467076

Dan-Mallam, Y. and Abdullah, M.Z. and Megat Yusoff, P.S.M. (2016) Influence of Recycling Frequency on Mechanical and Physical Properties of Kenaf Fiber Reinforced Polyoxymethylene Composite. Journal of Natural Fibers, 13 (5). pp. 532-546. ISSN 15440478

Dennis, J.O. and Rabih, A.A.S. and Md Khir, M.H. and Ahmed, A.Y. and Ahmed, M.G. and Mian, M.U. (2016) Characterization of embedded microheater of a CMOS�MEMS gravimetric sensor device. Microelectronics Journal, 55. pp. 179-188. ISSN 00262692

Danish, M. and Ginta, T.L. and Wahjoedi, B.A. (2016) Enhanced functional properties of Mg alloys by cryogenic machining. International Journal of Applied Engineering Research, 11 (7). pp. 5055-5059. ISSN 09734562

Danish, M. and Ginta, T.L. and Alkali, A.U. and Yasir, M. (2016) Thermal analysis of cryogenic machining of Mg alloy using FEM. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5134-5138. ISSN 18196608

Din, I.U. and Tasleem, S. and Naeem, A. and Shaharun, M.S. and Nasir, Q. (2016) Study of Annealing Conditions on Particle Size of Nickel Ferrite Nanoparticles Synthesized by Wet Chemical Route. Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, 46 (3). pp. 405-408. ISSN 15533174

Daud, H. and Razali, R. and Zaki, M.R.O. and Shafie, A. (2016) Curve fitting using logarithmic function for sea bed logging data. Journal of Computational and Theoretical Nanoscience, 13 (10). pp. 7448-7454. ISSN 15461955

Danish, M. and Ginta, T.L. and Wahjoedi, B.A. and Yasir, M. and Alkali, A.U. (2016) Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14259-14263. ISSN 18196608

Dan, N.E. and Tarmizi Othman, M. and Hussain, P. and Amir, N.B. and Kakooei, S. (2016) Quenching and heat treatment of welded duplex stainless steel to avoid intergranular corrosion. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13405-13409. ISSN 18196608

Dahy, E. and Shafie, A. and Yahya, N. (2016) A study on the behavior of electromagnetic waves for a curved antenna. Applied Mathematics and Information Sciences, 10 (6). pp. 2101-2108. ISSN 19350090

Daud, M.A. and Ariffin, M.R.K. and Kularajasingam, S. and Hussin, C.H.C. and Juhan, N. and Hasni, M.M. (2016) Use of new efficient lossless data compression method in transmitting encrypted Baptista symmetric chaotic cryptosystem data. Jurnal Teknologi, 78 (6-4). pp. 61-66. ISSN 01279696

Dennis, J.O. and Rabih, A.A.S. and Md Khir, M.H. and Ahmed, M.G.A. and Ahmed, A.Y. (2016) Modeling and Finite Element Analysis Simulation of MEMS Based Acetone Vapor Sensor for Noninvasive Screening of Diabetes. Journal of Sensors, 2016. ISSN 1687725X

Din, I.U. and Shaharun, M.S. and Subbarao, D. and Naeem, A. and Hussain, F. (2016) Influence of niobium on carbon nanofibres based Cu/ZrO2catalysts for liquid phase hydrogenation of CO2to methanol. Catalysis Today, 259. pp. 303-311. ISSN 09205861

E

Elgharbawy, A.A. and Alam, M.Z. and Kabbashi, N.A. and Moniruzzaman, M. and Jamal, P. (2016) Evaluation of several ionic liquids for in situ hydrolysis of empty fruit bunches by locally-produced cellulase. 3 Biotech, 6 (2). ISSN 2190572X

Eldemerdash, U. and Kamarudin, K. (2016) Assessment of new and improved solvent for pre-elimination of BTEX emissions in glycol dehydration processes. Chemical Engineering Research and Design, 115. pp. 214-220. ISSN 02638762

Ezechi, E.H. and Kutty, S.R.B.M. and Isa, M.H. and Liew, M.S. (2016) Application of response surface methodology for the optimization of hexavalent chromium removal using a new low-cost adsorbent. Desalination and Water Treatment, 57 (47). pp. 22507-22518. ISSN 19443994

Esfahani, N.B. and Dashti, N.G. and Dashti, M.G. and Noorv, M.I. and Koon, P.B. and Talib, R.A. and Lubis, S.H. (2016) Dietary predictors of overweight and obesity in Iranian adolescents. Iranian Red Crescent Medical Journal, 18 (9). ISSN 20741804

Ezechi, E.H. and Kutty, S.R.M. and Isa, M.H. and Malakahmad, A. and Udeh, C.M. and Menyechi, E.J. (2016) Treatment of synthetic domestic wastewater by integrated aerobic/anoxic bioreactor (IAAB). Nature Environment and Pollution Technology, 15 (3). pp. 943-946. ISSN 09726268

Embong, R. and Shafiq, N. and Kusbiantoro, A. (2016) Silica extraction and incineration process of sugarcane bagasse ash (SCBA) as pozzolanic materials: A review. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7304-7308. ISSN 18196608

Elgharbawy, A.A. and Alam, M.Z. and Moniruzzaman, M. and Goto, M. (2016) Ionic liquid pretreatment as emerging approaches for enhanced enzymatic hydrolysis of lignocellulosic biomass. Biochemical Engineering Journal, 109. pp. 252-267. ISSN 1369703X

Embong, R. and Shafiq, N. and Kusbiantoro, A. and Nuruddin, M.F. (2016) Effectiveness of low-concentration acid and solar drying as pre-treatment features for producing pozzolanic sugarcane bagasse ash. Journal of Cleaner Production, 112. pp. 953-962. ISSN 09596526

Embong, R. and Kusbiantoro, A. and Shafiq, N. and Nuruddin, M.F. (2016) Strength and microstructural properties of fly ash based geopolymer concrete containing high-calcium and water-absorptive aggregate. Journal of Cleaner Production, 112. pp. 816-822. ISSN 09596526

Elarafi, M.G.M.K. and Zabiri, H. (2016) Analysis of control valves stiction quantification tool. ASEAN Journal of Chemical Engineering, 16 (2). pp. 70-94. ISSN 16554418

Emamian, S. and Awang, M. and Hussai, P. and Meyghani, B. and Zafar, A. (2016) Influences of tool pin profile on the friction stir welding of AA6061. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12258-12261. ISSN 18196608

Ezechi, E.H. and Kutty, S.R.B.M. and Isa, M.H. and Malakahmad, A. and Ude, C.M. and Menyechi, E.J. and Olisa, E. (2016) Nutrient removal from wastewater by integrated attached growth bioreactor. Research Journal of Environmental Toxicology, 10 (1). pp. 28-38. ISSN 18193420

El-Harbawi, M. and Trang, P.T.K. (2016) Development of mathematical model using group contribution method to predict exposure limit values in air for safeguarding health. Advances in Intelligent Systems and Computing, 382. pp. 395-402. ISSN 21945357

F

Faisal, A. and Kamaruddin, B. and Ramasamy, M. and Zabiri, H. and Mahadzir, S. (2016) Economic model predictive control of distillation column. Advanced Science Letters, 22 (10). pp. 2671-2675. ISSN 19366612

Foulet, A. and Ghanem, O.B. and El-Harbawi, M. and Lévêque, J.-M. and Mutalib, M.I.A. and Yin, C.-Y. (2016) Understanding the physical properties, toxicities and anti-microbial activities of choline-amino acid-based salts: Low-toxic variants of ionic liquids. Journal of Molecular Liquids, 221. pp. 133-138. ISSN 01677322

Financie, R. and Moniruzzaman, M. and Uemura, Y. (2016) Enhanced enzymatic delignification of oil palm biomass with ionic liquid pretreatment. Biochemical Engineering Journal, 110. pp. 1-7. ISSN 1369703X

Fosu-Duah, E.L. and Padmanabhan, E. and Gámez Vintaned, J.A. (2016) Electrophoretic behavior of some shales from the setap formation, Sarawak Basin, Malaysia. International Journal of Applied Engineering Research, 11 (1). pp. 337-341. ISSN 09734562

Foong, O.-M. and Yong, S.-P. (2016) Swarm LSA-PSO clustering model in text summarization. International Journal of Advances in Soft Computing and its Applications, 8 (3). pp. 88-99. ISSN 20748523

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Mengal, A.N. (2016) Effect of low velocity impact on deformation behavior of metallic pressure vessel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13319-13324. ISSN 18196608

Firmansyah and Aziz, A.R.A. and Heikal, M.R. and Abidin, E.Z.Z. (2016) The effect of wall temperature to the combustion of diesel/CNG mixture. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12923-12928. ISSN 18196608

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. (2016) An analytical investigation of the grooved journal bearing's performance with slip/no-slip texture bearing. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12990-12993. ISSN 18196608

Fmy, Y. and Othman, M. (2016) The mechanism and microstructure of silicanizing process on mild steel substrate in the medium of silica sand. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12005-12010. ISSN 18196608

Farnam, M. and Mukhtar, H. and Shariff, A.M. (2016) An investigation of blended polymeric membranes and their gas separation performance. RSC Advances, 6 (104). pp. 102671-102679. ISSN 20462069

Farooq, M. and Ramli, A. and Naeem, A. and Saleem Khan, M. (2016) Effect of different metal oxides on the catalytic activity of γ-Al2O3-MgO supported bifunctional heterogeneous catalyst in biodiesel production from WCO. RSC Advances, 6 (2). pp. 505-512. ISSN 20462069

G

Ghani, M.F.A. and Simon, N. and Lai, G.T. and Mohamed, T.R.T. and Rafek, A.G. (2016) Study of lineament density in potential evaluation of rock fall in Kinta Valley Kajian ketumpatan lineamen dalam penilaian potensi jatuhan batuan di kawasan Lembah Kinta. Sains Malaysiana, 45 (12). pp. 1887-1896. ISSN 01266039

Gilani, S.I.-U. and Khan, M.H. and Ali, M. (2016) Revisiting Fanger's thermal comfort model using mean blood pressure as a bio-marker: An experimental investigation. Applied Thermal Engineering, 109. pp. 35-43. ISSN 13594311

Gouveia, A.S.L. and Oliveira, F.S. and Kurnia, K.A. and Marrucho, I.M. (2016) Deep Eutectic Solvents as Azeotrope Breakers: Liquid-Liquid Extraction and COSMO-RS Prediction. ACS Sustainable Chemistry and Engineering, 4 (10). pp. 5640-5650. ISSN 21680485

Garg, S. and Shariff, A.M. and Shaikh, M.S. and Lal, B. and Aftab, A. and Faiqa, N. (2016) Selected physical properties of aqueous potassium salt of L-phenylalanine as a solvent for CO2 capture. Chemical Engineering Research and Design, 113. pp. 169-181. ISSN 02638762

Gonfa, G. and Bustam, M.A. and Shariff, A.M. and Muhammad, N. and Ullah, S. (2016) Quantitative structure�activity relationships (QSARs) for estimation of activity coefficient at infinite dilution of water in ionic liquids for natural gas dehydration. Journal of the Taiwan Institute of Chemical Engineers, 66. pp. 222-229. ISSN 18761070

Garg, S. and Shariff, A.M. and Shaikh, M.S. and Lal, B. and Aftab, A. and Faiqa, N. (2016) VLE of CO2 in aqueous potassium salt of L-phenylalanine: Experimental data and modeling using modified Kent-Eisenberg model. Journal of Natural Gas Science and Engineering, 34. pp. 864-872. ISSN 18755100

Ganesan, T. and Vasant, P. and Elamvazuthi, I. and Shaari, K.Z.K. (2016) Game-theoretic differential evolution for multiobjective optimization of green sand mould system. Soft Computing, 20 (8). pp. 3189-3200. ISSN 14327643

Gholami, Z. and Zabidi, N.A.M. and Gholami, F. and Vakili, M. (2016) Synthesis and characterization of niobium-promoted cobalt/iron catalysts supported on carbon nanotubes for the hydrogenation of carbon monoxide. Ranliao Huaxue Xuebao/Journal of Fuel Chemistry and Technology, 44 (7). pp. 815-821. ISSN 2097213X

Ghazali, Z. and Zahid, M. and Kee, T.S. and Yussoff Ibrahim, M. (2016) A step towards sustainable society: The awareness of carbon dioxide emissions, climate change and carbon capture in Malaysia. International Journal of Economics and Financial Issues, 6 (3). pp. 179-187. ISSN 21464138

Gonfa, G. and Bustam, M.A. and Shariff, A.M. (2016) Quantum-chemical-based quantitative structure-activity relationships for estimation of CO2 absorption/desorption capacities of amine-based absorbents. International Journal of Greenhouse Gas Control, 49. pp. 372-378. ISSN 17505836

Gilal, A.R. and Jaafar, J. and Omar, M. and Basri, S. and Waqas, A. (2016) A rule-based model for software development team composition: Team leader role with personality types and gender classification. Information and Software Technology, 74. pp. 105-113. ISSN 09505849

Gebremedhen, H.S. and Woldemichael, D.E. and Hashim, F.M. (2016) Structural topology optimization subjected to relaxed stress and design variables. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6490-6495. ISSN 18196608

Gardezi, S.S.S. and Shafiq, N. and Zawawi, N.A.W.A. and Khamidi, M.F. and Farhan, S.A. (2016) A multivariable regression tool for embodied carbon footprint prediction in housing habitat. Habitat International, 53. pp. 292-300. ISSN 01973975

Ghasemi, M. and Wan Daud, W.R. and Hassan, S.H.A. and Jafary, T. and Rahimnejad, M. and Ahmad, A. and Yazdi, M.H. (2016) Carbon nanotube/polypyrrole nanocomposite as a novel cathode catalyst and proper alternative for Pt in microbial fuel cell. International Journal of Hydrogen Energy, 41 (8). pp. 4872-4878. ISSN 03603199

Ghasemi, M. and Wan Daud, W.R. and Alam, J. and Jafari, Y. and Sedighi, M. and Aljlil, S.A. and Ilbeygi, H. (2016) Sulfonated poly ether ether ketone with different degree of sulphonation in microbial fuel cell: Application study and economical analysis. International Journal of Hydrogen Energy, 41 (8). pp. 4862-4871. ISSN 03603199

Ganesan, T. and Vasant, P. and Elamvazuthi, I. (2016) Multiobjective optimization using particle swarm optimization with non-Gaussian random generators. Intelligent Decision Technologies, 10 (2). pp. 93-103. ISSN 18724981

Gilassi, S. and Rahmanian, N. (2016) CFD Modelling of a Hollow Fibre Membrane for CO2 Removal by Aqueous Amine Solutions of MEA, DEA and MDEA. International Journal of Chemical Reactor Engineering, 14 (1). pp. 53-61. ISSN 15426580

Ghasemi, M. and Wan Daud, W.R. and Alam, J. and Ilbeygi, H. and Sedighi, M. and Ismail, A.F. and Yazdi, M.H. and Aljlil, S.A. (2016) Treatment of two different water resources in desalination and microbial fuel cell processes by poly sulfone/Sulfonated poly ether ether ketone hybrid membrane. Energy, 96. pp. 303-313. ISSN 03605442

Gebremedhen, H.S. and Woldemichael, D.E. and Hashim, F.M. (2016) A literature survey on challenges in stress based topology optimization. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14188-14194. ISSN 18196608

Gilani, S.E. and Al-Kayiem, H.H. and Woldemicheal, D.E. (2016) Effect of conical pin arrangement on heat transfer efficiency of a free convective solar air heater. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2053-2064. ISSN 22894659

Gilani, S.E. and Al-Kayiem, H.H. and Matthias, B. and Woldemicheal, D.E. (2016) Enhancement of the heat transfer rate in free convection solar air heater using pin shaped artificial roughness on absorber plate. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12953-12958. ISSN 18196608

Gillani, Q.F. and Ahmad, F. and Mutlib, M.I.A. and Melor, P.S. and Arogundade, A. (2016) Synergistic effects of zinc borate and halloysite nanotubes (HNTS) on char morphology and gases emission of epoxy based intumescent fire retardant systems. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12053-12057. ISSN 18196608

Gupta, R. and Elamvazuthi, I. and George, J. (2016) Image quality assessment: A case study on ultrasound images of supraspinatus tendon. Studies in Computational Intelligence, 651. pp. 257-284. ISSN 1860949X

Goudos, S.K. and Anagnostou, D.E. and Kalialakis, C. and Vasant, P. and Nikolaou, S. (2016) Evolutionary Algorithms Applied to Antennas and Propagation: Emerging Trends and Applications. International Journal of Antennas and Propagation, 2016. ISSN 16875869

Gafoordeen, N. and Nayeem, M.M. and Aslam, A.M. (2016) Zakat investment in shariah. International Business Management, 10 (12). pp. 2398-2401. ISSN 19935250

Garg, S. and Shariff, A.M. and Shaikh, M.S. and Lal, B. and Aftab, A. and Faiqa, N. (2016) Surface tension and derived surface thermodynamic properties of aqueous sodium salt of L-phenylalanine. Indian Journal of Science and Technology, 9 (29). ISSN 09746846

Gillani, Q.F. and Ahmad, F. and Mutlib, M.I.A. and Syahera, E. (2016) Thermal degradation and char morphology of HNTs reinforced epoxy based intumescent fire retardant coatings. Key Engineering Materials, 701. pp. 83-88. ISSN 10139826

Gilal, A.R. and Jaafar, J. and Omar, M. and Basri, S. and Aziz, I.A. (2016) Balancing the personality of programmer: Software development team composition. Malaysian Journal of Computer Science, 29 (2). pp. 145-155. ISSN 01279084

George, J.M. and Kurian, V.J. and Wahab, M.M.A. (2016) Changes in the pushover analysis results of offshore jacket platforms due to the incorporation of the aging effect of piles. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2602-2606. ISSN 18196608

H

Hussain, Z. and Sulaiman, S.A. and Khan, A. and Khan, K.M. and Perveen, S. and Naz, M.Y. (2016) Two-Step Pyrolysis of Spirogyra for Fuels Using Cement Catalytic. Waste and Biomass Valorization, 7 (6). pp. 1481-1489. ISSN 18772641

Hina, S. and Dominic, P.D.D. and Ratnam, K.A. (2016) A Relational Study of Critical Threats and Risks Affecting the Potential Usage of Collaborative Pattern. Global Journal of Flexible Systems Management, 17 (4). pp. 373-388. ISSN 09722696

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2016) Effect of injection timing on combustion, performance and emissions of lean-burn syngas (H2/CO) in spark-ignition direct-injection engine. International Journal of Engine Research, 17 (9). pp. 921-933. ISSN 14680874

Hassan, S. and Khosravi, A. and Jaafar, J. and Khanesar, M.A. (2016) A systematic design of interval type-2 fuzzy logic system using extreme learning machine for electricity load demand forecasting. International Journal of Electrical Power and Energy Systems, 82. pp. 1-10. ISSN 01420615

Hematpour, H. and Parvazdavani, M. and Abbasi, S. and Mahmood, S.M. (2016) Investigation of low saline water�s effects on relative permeability in carbonate reservoirs. Jurnal Teknologi, 78 (10). pp. 93-99. ISSN 01279696

Huang, W. and Leong, Y.-K. and Chen, T. and Au, P.-I. and Liu, X. and Qiu, Z. (2016) Surface chemistry and rheological properties of API bentonite drilling fluid: pH effect, yield stress, zeta potential and ageing behaviour. Journal of Petroleum Science and Engineering, 146. pp. 561-569. ISSN 09204105

Hassan, R. and Marimuthu, M. (2016) Corporate governance, board diversity, and firm value: Examining large companies using panel data approach. Economics Bulletin, 36 (3). pp. 1737-1750. ISSN 15452921

Hussain, N. and Karsiti, M.N. and Jeoti, V. and Yahya, N. (2016) Use of wavelets in marine controlled source electromagnetic method for geophysical modeling. International Journal of Applied Electromagnetics and Mechanics, 51 (4). pp. 431-443. ISSN 13835416

Hassan, S. and Khanesar, M.A. and Kayacan, E. and Jaafar, J. and Khosravi, A. (2016) Optimal design of adaptive type-2 neuro-fuzzy systems: A review. Applied Soft Computing Journal, 44. pp. 134-143. ISSN 15684946

Hairul, N.A.H. and Shariff, A.M. and Tay, W.H. and Mortel, A.M.A.V.D. and Lau, K.K. and Tan, L.S. (2016) Modelling of high pressure CO2 absorption using PZ+AMP blended solution in a packed absorption column. Separation and Purification Technology, 165. pp. 179-189. ISSN 13835866

Hematpour, H. and Mahmood, S.M. and Memon, M.K. and Mongy, A.M. (2016) Study of unsteady state behavior of foam in surfactant-alternating-gas process. Indian Journal of Science and Technology, 9 (28). p. 91056. ISSN 09746846

Hairul, N.A.H. and Shariff, A.M. and Bustam, M.A. (2016) Mass transfer performance of 2-amino-2-methyl-1-propanol and piperazine promoted 2-amino-2-methyl-1-propanol blended solvent in high pressure CO2 absorption. International Journal of Greenhouse Gas Control, 49. pp. 121-127. ISSN 17505836

Hanaei, H. and Assadi, M.K. and Saidur, R. (2016) Highly efficient antireflective and self-cleaning coatings that incorporate carbon nanotubes (CNTs) into solar cells: A review. Renewable and Sustainable Energy Reviews, 59. pp. 620-635. ISSN 13640321

Hong, B.Z. and Keong, L.K. and Shariff, A.M. (2016) CFD modelling of most probable bubble nucleation rate from binary mixture with estimation of components� mole fraction in critical cluster. Continuum Mechanics and Thermodynamics, 28 (3). pp. 655-668. ISSN 09351175

Hussin, H. and Shuaib, K. and Abd Majid, M.A. (2016) A case study on fuzzy logic-based risk assessment in oil and gas industry. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3049-3054. ISSN 18196608

Hanaei, H. and Assadi, M.K. and Mohamed, N.M. and Appasamy, J.S. (2016) Fabrication of SWCNT/TiO2 for creating self-cleaning property on the glass. International Journal of Renewable Energy Research, 6 (4). pp. 1612-1618. ISSN 13090127

Herman, A.P. and Yusup, S. and Shahbaz, M. (2016) Utilization of bottom ash as catalyst in biomass steam gasification for hydrogen and syngas production. Chemical Engineering Transactions, 52. pp. 1249-1254. ISSN 22839216

Haris, F. and Hussain, P. and Abidin, K.A.Z. (2016) Feasible joining on the reaction layer of diffusion bonded sialon and duplex stainless steel. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14290-14293. ISSN 18196608

Huat, B.Y. and Ghai, L.L. and Pao, W. and Boon, T.T. (2016) Sensitivity analysis of concave capacitance sensors for holdup measurement in two-phase flow. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14244-14247. ISSN 18196608

Hamizol, M.S. and Megat-Yusoff, P.S.M. and Nasrudin, M.A. and Meor Said, M.A. and Jasmani, M.S. and Syed Ahmad Ghazali, S.M.A. (2016) Investigation on changes in gamma prime precipitate on varying surface locations of IN738 engine turbine blade. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2076-2083. ISSN 22894659

Halim, H.A. and Ahmad, N.H. and Ramayah, T. and Taghizadeh, S.K. (2016) Capturing the �pioneering minds� via human capital: The impact on innovative performance of Malaysian SMEs. Asian Academy of Management Journal, 21. pp. 105-126. ISSN 13942603

Haghanifar, S. and Kakooei, S. and Ismail, M.C. (2016) Electrochemical hydrogen storage characteristics of Mg2-xCxNi (x = 0, 0.1, 0.2, 0.5) alloys prepared by mechanical alloying. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13013-13018. ISSN 18196608

Hussin, H. and Ghazali, Z. and Suratanin, N.A. and Muhamad, M. and Mokhtar, A.A. (2016) An investigation into root cause failure analysis (RCFA) practices in oil and gas industry. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13372-13375. ISSN 18196608

Hussain, N. and Bin Baharom, M. and Maharun, M. (2016) The effect of total length of wire ropes on the torsional properties of Low-Stiffness-Resilient-Shaft. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12913-12918. ISSN 18196608

Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. (2016) Effect of surface texturing on hydrodynamic performance of journal bearings. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 172-176. ISSN 18196608

Hashim, U.K.M. and Ahmad, A. and Aboobaider, B.M. and Sakidin, H. and Subatira, B. and Isa, M.S.M. (2016) Change detection from Landsat-5 TM Satellite data. ARPN Journal of Engineering and Applied Sciences, 11 (17). pp. 10234-10238. ISSN 18196608

Hanaei, H. and Assadi, M.K. and Mohamed, N.M. and Bashiri, R. (2016) A theoretical investigation into the performance of swcnts as an antireflection coating layer for silicon solar cell. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12094-12098. ISSN 18196608

Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Faez, K.M. (2016) An analytical approach to investigate the effect of grooved surface on short journal bearing's performance. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12045-12049. ISSN 18196608

Hashim, N. and Mamat, O. and Baig, Z. (2016) Application of taguchi's method on the purifying process of tronoh silica sand via mechanical milling and ultrasonic bath. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12017-12022. ISSN 18196608

Hashim, F.M. and Abbasi, A. (2016) Empirical modeling of hydrate formation prediction in deepwater pipelines. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12212-12216. ISSN 18196608

Hussain, A. and Ibrahim, T. and Nallagoowden, P. and Memon, F. (2016) Optimization of linear permanent magnet (PM) generator with triangular-shaped magnet for wave energy conversion using finite element method. Journal of Electrical Systems, 12 (3). pp. 583-590. ISSN 11125209

Hashim, A.S. and Ahmad, W.F.W. (2016) Mobile school conceptual model for secondary schools in Malaysia. Jurnal Teknologi, 78 (8-2). pp. 1-11. ISSN 01279696

Hassan, E.A. and Tang, T.B. (2016) Smart glasses for the visually impaired people. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9759. pp. 579-582. ISSN 03029743

Hematpour, H. and Mahmood, S.M. and Akbari, S. and Asl, A.S. (2016) Foam modeling approaches in enhanced oil recovery: A review. Indian Journal of Science and Technology, 9 (22). ISSN 09746846

Harun, N. and Gimbun, J. and Azizan, M.T. and Abidin, S.Z. (2016) Characterization of Ag-promoted Ni/SiO2 catalysts for syngas production via carbon dioxide (CO2) dry reforming of glycerol. Bulletin of Chemical Reaction Engineering and Catalysis, 11 (2). pp. 220-229. ISSN 19782993

Hamdi, Z. and Awang, M. (2016) Effect of low temperature CO2 injection in high temperature oil reservoirs using slimtube experiment. Jurnal Teknologi, 78 (6-6). pp. 35-39. ISSN 01279696

Hematpur, H. and Mahmood, S.M. and Amer, M.M. (2016) Experimental investigation of flow rate�s effect on surfactant-alternating-gas foam process. Jurnal Teknologi, 78 (6-4). pp. 55-60. ISSN 01279696

Habib, K. and Askalany, A. (2016) Study of a silica gel-water based dual mode adsorption chiller. International Journal of Engineering and Technology, 8 (2). pp. 1010-1017. ISSN 23198613

Hafezolghorani Esfahani, M. and Hejazi, F. and Vaghei, R. and Nikbakht, E. and Tze, D.C.J. (2016) Development of Constitutive Model for Precast Prestressed Concrete Segmental Columns. Modelling and Simulation in Engineering, 2016. ISSN 16875591

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. (2016) B-spline collocation method for boundary value problems in complex domains. International Journal of Computing Science and Mathematics, 7 (2). pp. 110-125. ISSN 17525055

Hussein, A.M. and Bakar, R.A. and Kadirgama, K. and Sharma, K.V. (2016) Heat transfer enhancement with elliptical tube under turbulent flow tio2-water nanofluid. Thermal Science, 20 (1). pp. 89-97. ISSN 03549836

Halim, A. and Sulam, M.B. (2016) Prediction of soil settlement based on constant plastic index method. International Journal of GEOMATE, 11 (5). pp. 2717-2722. ISSN 21862982

Hina, S. and Dominic, P.D.D. (2016) Gauging the school-based acceptability of Web 2.0 collaborative tools. International Journal of Business Information Systems, 21 (3). pp. 321-341. ISSN 17460972

Hooi, Y.K. and Fadzil Hassan, M. and Shariff, A.M. and Aziz, H.A. and Jamal, N.M. and Suppiah, S. (2016) Analysis of chemical plant process safety information integration model from information system perspective. Lecture Notes in Electrical Engineering, 376. pp. 289-298. ISSN 18761100

Hussain, Z. and Sulaiman, S.A. and Gul, H. and Farooq, S. and Khan, K.M. and Gulab, H. and Naz, M.Y. (2016) Conversion of waste-soap and soap-like materials into diesel and gasoline by catalytic pyrolysis using virgin soap as model. Canadian Journal of Chemical Engineering, 94 (1). pp. 94-100. ISSN 00084034

Humayun, J. and Malik, A.S. (2016) Real-time processing for shape-from-focus techniques. Journal of Real-Time Image Processing, 11 (1). pp. 49-62. ISSN 18618200

I

Ismail, S. and Abdul Rahman, H. and Abidin, E.Z. and Isha, A.S.N. and Abu Bakar, S. and Zulkifley, N.A. and Fuad, A.F.A. (2016) The effect of faith-based smoking cessation intervention during Ramadan among Malay smokers. Qatar Medical Journal, 2016 (2). ISSN 02538253

Ikram, I.M. and Ismail, A. and Zakaria, A. and Awang, M. and Rojan, M.A. and Hamid, D.A. and Makhtar, M.F. and Said, M.T.S.M. (2016) A preliminary experimental study of underwater Friction Stir Welding AA5083 plate butt joint. Journal of Environmental Science and Technology, 9 (6). pp. 462-466. ISSN 19947887

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Magzoub, M. and Hung, N.T. (2016) A Non-Invasive Method for Condition Monitoring of Induction Motors Operating Under Arbitrary Loading Conditions. Arabian Journal for Science and Engineering, 41 (9). pp. 3463-3471. ISSN 2193567X

Ibrahim, N. and Ahmad, W.F.W. and Shafie, A. (2016) Effectiveness study on multimedia mobile application for children: Mfolktales. Journal of Theoretical and Applied Information Technology, 89 (1). pp. 269-277. ISSN 19928645

Isa, F. and Suleman, H. and Zabiri, H. and Maulud, A.S. and Ramasamy, M. and Tufa, L.D. and Shariff, A.M. (2016) An overview on CO2 removal via absorption: Effect of elevated pressures in counter-current packed column. Journal of Natural Gas Science and Engineering, 33. pp. 666-677. ISSN 18755100

Ibrahim, M.Y. and Ghazali, Z. and Rahman, H.U. (2016) The feasibility of carbon capturing, storage and utilization projects in developing countries: A case of Malaysia. International Journal of Economics and Financial Issues, 6 (3). pp. 6-11. ISSN 21464138

Ibrahim, M.Y. and Ahmad, A.C. and Khan, M.A. (2016) Improving shareholder value through corporate governance mechanism in Malaysian listed companies. International Journal of Economics and Financial Issues, 6 (3). pp. 44-49. ISSN 21464138

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2016) State-space Modelling and Digital Controller Design for DC-DC Converter. Telkomnika (Telecommunication Computing Electronics and Control), 14 (2). pp. 497-506. ISSN 16936930

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2016) PID controller response to set-point change in DC-DC converter control. International Journal of Power Electronics and Drive Systems, 7 (2). pp. 294-302. ISSN 20888694

Ibrahim, A.M. and Baharudin, B. and Md Said, A. and Hashimah, P.N. (2016) Classification of breast tumor in mammogram images using unsupervised feature learning. American Journal of Applied Sciences, 13 (5). pp. 552-561. ISSN 15469239

Ismaeel, A.A. and Al-Kayiem, H.H. and Baheta, A.T. and Aurybi, M.A. (2016) Comparative critique of thermal energy storage technique in solar chimney power plants. International Energy Journal, 16 (1). pp. 11-24. ISSN 1513718X

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Magzoub, M. (2016) An Intelligent Fault Diagnosis of Induction Motors in an Arbitrary Noisy Environment. Journal of Nondestructive Evaluation, 35 (1). pp. 1-13. ISSN 01959298

Inayat, M. and Sulaiman, S.A. and Kumar, A. and Guangul, F.M. (2016) Effect of fuel particle size and blending ratio on syngas production and performance of co-gasification. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2187-2199. ISSN 22894659

Imran, M.N. and Baharom, M.B. (2016) Simplified modelling method to predict output speed of an overrunning clutch using ADAMS/Solver subroutine. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13038-13041. ISSN 18196608

Ismail, A. and Awang, M. and Hamid, D.A. and Ab Rahman, F. and Khalid, P.Z.M. (2016) Temperature profile and fracture location of friction stir welded AA6063-T6 pipe butt joint. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13305-13308. ISSN 18196608

Ismail, A. and Awang, M. and Rojan, M.A. and Samsudin, S.H. (2016) The characteristic of temperature curves for friction stir welding of aluminium alloy 6063-T6 pipe during tool plunging stage. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 277-280. ISSN 18196608

Ibrahim, M.Y. and Ahmad, A.C. and Johl, S.K. and Ur Rahman, H. (2016) Corporate regulations and quality of financial reporting: A proposed study. International Journal of Economics and Financial Issues, 6 (7Speci). pp. 132-136. ISSN 21464138

Ismael, M.A. and Heikal, M.R. and Rashid, A. and Aziz, A. and Crua, C. (2016) An overview of experimental techniques of the investigation of water-diesel emulsion characteristics droplets micro-explosion. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11975-11981. ISSN 18196608

Irshad, K. and Habib, K. and Kareem, M.W. (2016) Effect of air gap on performance enhancement of building assisted with photo voltaic systems. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12078-12083. ISSN 18196608

Ismaeel, A.A. and Al-Kayiem, H.H. and Baheta, A.T. and Aurybi, M.A. (2016) Comparative critique on the performance evaluation of a solar - air heater for natural updraft solar system. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12170-12175. ISSN 18196608

Ismail, A. and Awang, M. and Samsudin, S.H. and Rojan, M.A. and Jasri, M.A.H.M. (2016) The hardness variation due to secondary heating in friction stir welding of small diameter aluminium alloy 6063 pipe. Advanced Structured Materials, 61. pp. 87-94. ISSN 18698433

Ibrahim, N.-N.M.D. and Awang, M. and Hussain, P. (2016) Effect of thickness on residual stress in joining sialon to AISI 420. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4191-4196. ISSN 18196608

Irshad, M.I. and Mohamed, N.M. and Abdullah, M.Z. and Saheed, M.S.M. and Mumtaz, A. and Yasar, M. and Yar, A. and Zeeshan, M.A. and Sort, J. (2016) Influence of the electrodeposition potential on the crystallographic structure and effective magnetic easy axis of cobalt nanowires. RSC Advances, 6 (17). pp. 14266-14272. ISSN 20462069

Irshad, S. and Rambli, D.R.A. (2016) Design implications for quality user experience in mobile augmented reality applications. Lecture Notes in Electrical Engineering, 362. pp. 1283-1294. ISSN 18761100

J

Jusoh, N. and Yeong, Y.F. and Cheong, W.L. and Lau, K.K. and M. Shariff, A. (2016) Facile fabrication of mixed matrix membranes containing 6FDA-durene polyimide and ZIF-8 nanofillers for CO2 capture. Journal of Industrial and Engineering Chemistry, 44. pp. 164-173. ISSN 1226086X

Jusoh, N. and Lau, K.K. and Yeong, Y.F. and Shariff, A.M. (2016) Bulk CO2/CH4 separation for offshore operating conditions using membrane process. Sains Malaysiana, 45 (11). pp. 1707-1714. ISSN 01266039

Japper-Jaafar, A. and Bhaskoro, P.T. and Mior, Z.S. (2016) A new perspective on the measurements of wax appearance temperature: Comparison between DSC, thermomicroscopy and rheometry and the cooling rate effects. Journal of Petroleum Science and Engineering, 147. pp. 672-681. ISSN 09204105

Jumbri, K. and Ahmad, H. and Abdulmalek, E. and Abdul Rahman, M.B. (2016) Binding energy and biophysical properties of ionic liquid-DNA complex: Understanding the role of hydrophobic interactions. Journal of Molecular Liquids, 223. pp. 1197-1203. ISSN 01677322

Jusoh, N. and Yeong, Y.F. and Chew, T.L. and Lau, K.K. and Shariff, A.M. (2016) Current Development and Challenges of Mixed Matrix Membranes for CO2/CH4 Separation. Separation and Purification Reviews, 45 (4). pp. 321-344. ISSN 15422119

Jamil, A. and Ching, O.P. and Shariff, A.B.M. (2016) Current Status and Future Prospect of Polymer-Layered Silicate Mixed-Matrix Membranes for CO2/CH4 Separation. Chemical Engineering and Technology, 39 (8). pp. 1393-1405. ISSN 09307516

Jan, M.T. and Ahmad, F. and Hamid, N.H.B. and Khir, M.H.B.M. and Shoaib, M. and Ashraf, K. (2016) Experimental investigation of temperature and relative humidity effects on resonance frequency and quality factor of CMOS-MEMS paddle resonator. Microelectronics Reliability, 63. pp. 82-89. ISSN 00262714

Johari, K. and Saman, N. and Song, S.T. and Cheu, S.C. and Kong, H. and Mat, H. (2016) Development of coconut pith chars towards high elemental mercury adsorption performance - Effect of pyrolysis temperatures. Chemosphere, 156. pp. 56-68. ISSN 00456535

Jilani, M.T. and Cheong, L.Y. and Saand, A.S. and Wen, W.P. and Rehman, M.Z.U. (2016) Non-destructive characterization of dielectric materials by microwave spectroscopy in LS band. Journal of Optoelectronics and Advanced Materials, 18 (5-6). pp. 589-594. ISSN 14544164

Johari, K. and Saman, N. and Song, S.T. and Chin, C.S. and Kong, H. and Mat, H. (2016) Adsorption enhancement of elemental mercury by various surface modified coconut husk as eco-friendly low-cost adsorbents. International Biodeterioration and Biodegradation, 109. pp. 45-52. ISSN 09648305

Jamil, F. and Ahmad, M.M. and Yusup, S. and Abdullah, B. (2016) Upgrading of bio-oil from palm kernel shell by catalytic cracking in the presence of HZSM-5. International Journal of Green Energy, 13 (4). pp. 424-429. ISSN 15435075

Jatoi, M.A. and Kamel, N. and Malik, A.S. and Faye, I. and Bornot, J.M. and Begum, T. (2016) EEG-based brain source localization using visual stimuli. International Journal of Imaging Systems and Technology, 26 (1). pp. 55-64. ISSN 08999457

Jilani, M.T. and Wen, W.P. and Rehman, M.Z.U. and Khan, A.M. and Cheong, L.Y. (2016) Microwave sensor for non-destructive dielectric characterization of biological systems. International Journal of Applied Electromagnetics and Mechanics, 50 (2). pp. 353-363. ISSN 13835416

Jan, M.T. and Ahmad, F. and Hamid, N.H.B. and Md Khir, M.H.B. and Ashraf, K. and Shoaib, M. (2016) Temperature dependent Young's modulus and quality factor of CMOS-MEMS resonator: Modelling and experimental approach. Microelectronics Reliability, 57. pp. 64-70. ISSN 00262714

Jilnai, M.T. and Wen, W.P. and Cheong, L.Y. and Rehman, M.Z.U. (2016) A microwave ring-resonator sensor for non-invasive assessment of meat aging. Sensors (Switzerland), 16 (1). ISSN 14248220

Jamil, A. and Ching, O.P. and Shariff, A.M. (2016) Macrovoids suppression in polyetherimide (Pei) hollow fibre membranes by optimizing the air gap. International Journal of Applied Engineering Research, 11 (19). pp. 9684-9688. ISSN 09734562

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2016) Fabrication of ZIF-8 / polyimide mixed matrix membranes and their structural properties. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11140-11144. ISSN 18196608

Jebaraj, S. (2016) Energy planning for india with focus on cost of coal based power generation. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14117-14120. ISSN 18196608

Jamil, I.E.A. and Al-Kayiem, H.H. (2016) Validation of simulation procedure for vertical oil/water flow. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13376-13379. ISSN 18196608

Johari, M.I.A. and Mustapha, M. and Mamat, O. and Kakooei, S. and Ginta, T.L. and Ismadi, M.Z.P. (2016) The microstructure, physical and mechanical properties of silicon carbide with alumina and yttria as sintering additives. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13300-13304. ISSN 18196608

Jaal, R.A. and Ismail, M.C. and Ariwahjoedi, B. (2016) Determination of critical micelle concentration (CMC) of corrosion inhibitor via electrochemical measurement. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13431-13434. ISSN 18196608

Javaid, M.Y. and Ovinis, M. and Hashim, F.B.M. and Maimun, A. and Ahmed, Y.M. and Ullah, B. (2016) Spiraling motion of an underwater glider: Dynamic modeling. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13006-13012. ISSN 18196608

Jamaludin, A.A.B. and Kamaruddin, S.B. and Othman, A.R.B. and Ismadi, M.Z.P. (2016) Determination of optimal PDC cutters geometry for multi-response optimization using the Taguchi method. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13410-13414. ISSN 18196608

Jessam, R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2016) Flow control in s-shaped aggressive diffuser using grooves on the inner and outer surfaces. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12247-12252. ISSN 18196608

Javaid, M.Y. and Ovinis, M. and Hashim, F.M. and Maimun, A. and Ahmed, Y.M. and Ullah, B. (2016) Effect of water current on underwater glider velocity and range. Jurnal Teknologi, 78 (10-4). pp. 47-53. ISSN 01279696

JosephNg, P.S. and KamilMahmood, A. and Kang, C.M. and Choo, P.Y. and Wong, S.W. and Phan, K.Y. and Lim, E.H. (2016) Exostructure services for infrastructure resources optimization. Journal of Telecommunication, Electronic and Computer Engineering, 8 (4). pp. 65-69. ISSN 21801843

Jaafar, J. and Indra, Z. and Zamin, N. (2016) A category classification algorithm for Indonesian and Malay news documents. Jurnal Teknologi, 78 (8-2). pp. 121-132. ISSN 01279696

Jusoh, S.N. and Mohamad, H. and Marto, A. and Alias, N.E. and Hezmi, M.A. and Abdullah, R.A. and Mohd. Yunus, N.Z. (2016) Investigation on the mechanics of precast segment tunnel lining. Jurnal Teknologi, 78 (8-6). pp. 61-66. ISSN 01279696

Javaid, M.U. and Isha, A.S.N. and Ghazali, Z. and Langove, N. (2016) Psychosocial stressors in relation to unsafe acts. International Review of Management and Marketing, 6 (4). pp. 108-113. ISSN 21464405

Jamil, A. and Ching, O.P. and Shariff, A.M. (2016) Minimizing morphological defects of PEI hollow fibre membrane by optimizing the dope viscosity. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1687-1691. ISSN 18196608

Jassim, L. and Yunus, R. and Rashid, U. and Rashid, S.A. and Salleh, M.A. and Irawan, S. and Ghaemi, F. (2016) Synthesis and optimization of 2-ethylhexyl ester as base oil for drilling fluid formulation. Chemical Engineering Communications, 203 (4). pp. 463-470. ISSN 00986445

JosephNg, P.S. and Kang, C.M. (2016) Beyond barebones cloud infrastructure services: Stumbling competitiveness during economic turbulence. Pertanika Journal of Science and Technology, 24 (1). pp. 101-121. ISSN 01287680

Jilani, M.T. and Wen, W.P. and Cheong, L.Y. and Rehman, M.Z.U. and Khan, M.T. (2016) Determination of size-independent effective permittivity of an overlay material using microstrip ring resonator. Microwave and Optical Technology Letters, 58 (1). pp. 4-9. ISSN 08952477

K

Kutty, S.R.M. and Ezechi, E.H. and Khaw, S.G. and Lai, C.L. and Isa, M.H. (2016) Bio-physical removal of heavy metal from aqueous solution. Desalination and Water Treatment, 57 (59). pp. 28932-28938. ISSN 19443994

Khan, Z. and Razali, R.B. and Daud, H. and Nor, N.M. and Fotuhi-Firuzabad, M. and Krebs, K.L. (2016) The computation of confidence intervals for the state parameters of power systems. SpringerPlus, 5 (1). ISSN 21931801

Kermanioryani, M. and Mutalib, M.I.A. and Kurnia, K.A. and Lethesh, K.C. and Krishnan, S. and Leveque, J.-M. (2016) Enhancement of ��� aromatic interactions between hydrophobic Ionic Liquids and Methylene Blue for an optimum removal efficiency and assessment of toxicity by microbiological method. Journal of Cleaner Production, 137. pp. 1149-1157. ISSN 09596526

Khan, W. and Gul, T. and Idrees, M. and Islam, S. and Khan, I. and Dennis, L.C.C. (2016) Thin film williamson Nanofluid flow with varying viscosity and thermal conductivity on a time-dependent stretching sheet. Applied Sciences (Switzerland), 6 (11). ISSN 20763417

Kumar, A. and Paramesran, R. and Lim, C.-L. and Dass, S.C. (2016) Tchebichef moment based restoration of Gaussian blurred images. Applied Optics, 55 (32). pp. 9006-9016. ISSN 1559128X

Karim, S.A.A. (2016) Positivity preserving interpolation by using rational cubic ball spline. Jurnal Teknologi, 78 (11). pp. 141-148. ISSN 01279696

Khan, A.S. and Man, Z. and Bustam, M.A. and Kait, C.F. and Ullah, Z. and Nasrullah, A. and Khan, M.I. and Gonfa, G. and Ahmad, P. and Muhammad, N. (2016) Kinetics and thermodynamic parameters of ionic liquid pretreated rubber wood biomass. Journal of Molecular Liquids, 223. pp. 754-762. ISSN 01677322

Kurnia, J.C. and Sasmito, A.P. and Mujumdar, A.S. (2016) Thermal Performance of Coiled Square Tubes at Large Temperature Differences for Heat Exchanger Application. Heat Transfer Engineering, 37 (16). pp. 1341-1356. ISSN 01457632

Kuppusamy, C.S. and Karuppanan, S. and Patil, S.S. (2016) Buckling Strength of Corroded Pipelines with Interacting Corrosion Defects: Numerical Analysis. International Journal of Structural Stability and Dynamics, 16 (9). ISSN 02194554

Khan, M.N.H. and Hasan, M.R. and Alam, M.K. (2016) Switching algorithm for leakage current reduction in a PV- no transformer inverter system. Indonesian Journal of Electrical Engineering and Computer Science, 4 (1). pp. 52-56. ISSN 25024752

Khezri, N. and Mohamad, H. and Fatahi, B. (2016) Stability assessment of tunnel face in a layered soil using upper bound theorem of limit analysis. Geomechanics and Engineering, 11 (4). pp. 471-492. ISSN 2005307X

Khor, C.S. and Elkamel, A. (2016) Optimal synthesis of a heat-integrated petroleum refinery configuration. Canadian Journal of Chemical Engineering, 94 (10). pp. 1939-1946. ISSN 00084034

Kurnia, J.C. and Xu, P. and Sasmito, A.P. (2016) A novel concept of enhanced gas recovery strategy from ventilation air methane in underground coal mines � A computational investigation. Journal of Natural Gas Science and Engineering, 35. pp. 661-672. ISSN 18755100

Khoo, S.-W. and Karuppanan, S. and Tan, C.-S. (2016) A review of surface deformation and strain measurement using two-dimensional digital image correlation. Metrology and Measurement Systems, 23 (3). pp. 461-480. ISSN 08608229

Khan, H.N. and Khan, M.A. and Razli, R.B. and Sahfie, A.B. and Shehzada, G. and Krebs, K.L. and Sarvghad, N. (2016) Health Care Expenditure and Economic Growth in SAARC Countries (1995�2012): A Panel Causality Analysis. Applied Research in Quality of Life, 11 (3). pp. 639-661. ISSN 18712584

Kang, C.H. and Shen, C. and Saheed, M.S.M. and Mohamed, N.M. and Ng, T.K. and Ooi, B.S. and Burhanudin, Z.A. (2016) Carbon nanotube-graphene composite film as transparent conductive electrode for GaN-based light-emitting diodes. Applied Physics Letters, 109 (8). ISSN 00036951

Kalid, K.S. and Mahmood, A.K. (2016) The development of a storytelling framework to support knowledge management processes. Journal of Theoretical and Applied Information Technology, 90 (1). pp. 12-22. ISSN 19928645

Krishnan, G. and Bidin, N. and Abdullah, M. and Ahmad, M.F.S. and Bakar, M.A.A. and Yasin, M. (2016) Liquid refractometer based mirrorless fiber optic displacement sensor. Sensors and Actuators, A: Physical, 247. pp. 227-233. ISSN 09244247

Kudiri, K.M. and Said, A.M. and Nayan, M.Y. (2016) Human emotion detection through facial expressions. Journal of Theoretical and Applied Information Technology, 88 (3). pp. 613-623. ISSN 19928645

Kermanioryani, M. and Mutalib, M.I.A. and Dong, Y. and Lethesh, K.C. and Ben Ghanem, O.B.O. and Kurnia, K.A. and Aminuddin, N.F. and Leveque, J.-M. (2016) Physicochemical properties of new imidazolium-based ionic liquids containing aromatic group. Journal of Chemical and Engineering Data, 61 (6). pp. 2020-2026. ISSN 00219568

Kurnia, J.C. and Sasmito, A.P. and Shamim, T. and Mujumdar, A.S. (2016) Numerical investigation of heat transfer and entropy generation of laminar flow in helical tubes with various cross sections. Applied Thermal Engineering, 102. pp. 849-860. ISSN 13594311

Khan, A.S. and Man, Z. and Bustam, M.A. and Kait, C.F. and Khan, M.I. and Muhammad, N. and Nasrullah, A. and Ullah, Z. and Ahmad, P. (2016) Impact of Ball-Milling Pretreatment on Pyrolysis Behavior and Kinetics of Crystalline Cellulose. Waste and Biomass Valorization, 7 (3). pp. 571-581. ISSN 18772641

Kermanioryani, M. and Abdul Mutalib, M.I. and Gonfa, G. and El-Harbawi, M. and Mazlan, F.A. and Lethesh, K.C. and Leveque, J.-M. (2016) Using tunability of ionic liquids to remove methylene blue from aqueous solution. Journal of Environmental Chemical Engineering, 4 (2). pp. 2327-2332. ISSN 22133437

Kumar, A. and Khir, M.H.M. and Yusoff, W.I.W. (2016) A model-based approach for integration analysis of well log and seismic data for reservoir characterization. Geosciences Journal, 20 (3). pp. 331-350. ISSN 12264806

Kurnia, J.C. and Sasmito, A.P. and Mujumdar, A.S. (2016) Potential catalyst savings in heterogeneous gaseous spiral coiled reactor utilizing selective wall coating - A computational study. Computers and Chemical Engineering, 88. pp. 59-72. ISSN 00981354

Khan, M.A. and Ullah, S. and Ching, D.L.C. and Khan, I. and Ullah, S. and Islam, S. and Gul, T. (2016) A mathematical study of an epidemic disease model spread by rumors. Journal of Computational and Theoretical Nanoscience, 13 (5). pp. 2856-2866. ISSN 15461955

Khan, F.U. and Khan, A.-U. and Hussain, J. and Khan, I.U. and Muhammad, N. and Khan, A. and Mehmood, S. and Asiri, A.M. and Khan, S.B. and Gilani, A.H. (2016) Spasmolytic and Ca++ channel blocking potential of nepetolide: Isolated from nepeta suavis. Natural Product Communications, 11 (5). pp. 591-592. ISSN 1934578X

Khan, R.R.M. and Adnan, A. and Pervaiz, M. and Raza, M.A. and Sagir, M. and Naz, M.Y. (2016) Biodegradation of H acid by Bacillus subtilis and RP-HPLC method development for percent degradation estimation. Russian Journal of Physical Chemistry B, 10 (3). pp. 517-523. ISSN 19907931

Kulsi, C. and Dhara, P. and Mitra, M. and Kargupta, K. and Ganguly, S. and Banerjee, D. (2016) Effect of solvent on nanostructure and thermoelectric properties of bismuth. Indian Journal of Physics, 90 (5). pp. 557-562. ISSN 09731458

Khe, C.S. and Aziz, A. and Lockman, Z. and Liu, W.W. and Lai, C.W. and Rajalingam, S. and Merican, Z. (2016) Surfactant-free synthesis of magnetic cobalt particles with hierarchical nanostructures. Digest Journal of Nanomaterials and Biostructures, 11 (2). pp. 321-327. ISSN 18423582

Khan, W.Z. and Hossain, M.S. and Aalsalem, M.Y. and Saad, N.M. and Atiquzzaman, M. (2016) A cost analysis framework for claimer reporter witness based clone detection schemes in WSNs. Journal of Network and Computer Applications, 63. pp. 68-85. ISSN 10848045

Khan, S.U. and Khan, F.U. and Khan, I.U. and Muhammad, N. and Badshah, S. and Khan, A. and Ullah, A. and Khan, A.S. and Bilal, H. and Nasrullah, A. (2016) Biosorption of nickel (II) and copper (II) ions from aqueous solution using novel biomass derived from Nannorrhops ritchiana (Mazri Palm). Desalination and Water Treatment, 57 (9). pp. 3964-3974. ISSN 19443994

Kurnia, J.C. and Jangam, S.V. and Akhtar, S. and Sasmito, A.P. and Mujumdar, A.S. (2016) Advances in biofuel production from oil palm and palm oil processing wastes: A review. Biofuel Research Journal, 3 (1). pp. 332-346. ISSN 22928782

Krishnan, S. and Chandran, K. and Sinnathambi, C.M. (2016) Wastewater treatment technologies used for the removal of different surfactants: A comparative review. International Journal of Applied Chemistry, 12 (4). pp. 727-739. ISSN 09731792

Kurnia, J.C. and Sasmito, A.P. (2016) Heat transfer performance of non-circular coiled tubes - research summary, challenges and directions. International Journal of Automotive and Mechanical Engineering, 13 (3). pp. 3710-3727. ISSN 22298649

Khan, I. and Abdelhameed, T.N.A. and Dennis, L.C.C. (2016) Heat transfer in eccentric-concentric rotation of a disk and fluid at infinity. Journal of Computational and Theoretical Nanoscience, 13 (10). pp. 6482-6487. ISSN 15461955

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. (2016) An experimental investigation of microexplosion in bio fuel emulsion. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14303-14307. ISSN 18196608

Khan, J.A. and Al-Kayiem, H.H. and Aris, M.S. (2016) Effect of ASP flooding on oil-water stabilization and separation. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14253-14258. ISSN 18196608

Khlief, A.K. and Gilani, A.I.-U.-H. and Al-Kayiem, H.H. and Ali, B.H. (2016) Optical analysis of various reflectors applied in solar beam down tower. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14308-14312. ISSN 18196608

Krishnan, S. and Nagarajan, T. and Rani, A.M.A. and Ambaraj, W. and Ramiah, R. (2016) Rehabilitation for foot/ankle - Continuous Passive motion (CPM) using Shape Memory Alloy (SMA) actuated Stewart platform. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12908-12912. ISSN 18196608

Kurnia, K.A. and Sintra, T.E. and Danten, Y. and Cabaço, M.I. and Besnard, M. and Coutinho, J.A.P. (2016) A simple method for preparation of a novel hydrophobic ionic liquid with a per-fluoro-tert-butoxide anion. New Journal of Chemistry, 41 (1). pp. 47-50. ISSN 11440546

Khan, M.M. and Mokhtar, A.A. and Hussin, H. (2016) A fuzzy-based model to determine CUI corrosion rate for carbon steel piping systems. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13325-13330. ISSN 18196608

Khan, M.M. and Mokhtar, A. and Hussin, H. (2016) Prediction for corrosion under insulation subject to carbon steel pipes using ANFIS. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 268-276. ISSN 18196608

Kadhim, S.K. and Nasif, M.S. and Al-Kayiem, H.H. and Al Waked, R. (2016) Using fluid structure interaction technique to investigate the effect of vibration on bileaflet mechanical heart valve deformation. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12192-12196. ISSN 18196608

Karuppanan, S. and Patil, S.S. (2016) Finite element analysis of stress variation along the depth of gear tooth. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12228-12233. ISSN 18196608

Kamaruddin, S. and Zakarria, N.S. and Mehat, N.M. (2016) The influence of plastic extrusion blow molding parameters on waste reduction. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12029-12032. ISSN 18196608

Khan, S.A. and Yong, S.-P. and Janjua, U.I. (2016) A comparative evaluation of features for medical image modality classification. Jurnal Teknologi, 78 (8-2). pp. 133-141. ISSN 01279696

Khoo, S.W. and Karuppanan, S. and Tan, C.S. (2016) Development of a quantifiable approach in monitoring the fatigue cracks using digital image correlation. Key Engineering Materials, 701. pp. 211-215. ISSN 10139826

Khan, S.A. and Yong, S.-P. (2016) An evaluation of convolutional neural nets for medical image anatomy classification. Lecture Notes in Electrical Engineering, 387. pp. 293-303. ISSN 18761100

Khan, T. and Isa, M.H. and Ul Mustafa, M.R. and Yeek-Chia, H. and Baloo, L. and Binti Abd Manan, T.S. and Saeed, M.O. (2016) Cr(VI) adsorption from aqueous solution by an agricultural waste based carbon. RSC Advances, 6 (61). pp. 56365-56374. ISSN 20462069

Kinif, I. and Irawan, S. and Bharadwaj, A.M. (2016) Development and evaluation of solid control system to optimize drilling performance. Jurnal Teknologi, 78 (6-7). pp. 101-107. ISSN 01279696

Kutty, S.R.B.M. and Nagum, A.T.A. and Ezechi, E.H. (2016) Organic matter and nutrient removal in a sequencing baffled steep-flow constructed wetland system. Journal of Environmental Science and Technology, 9 (4). pp. 340-344. ISSN 19947887

Khoo, C.G. and Lam, M.K. and Lee, K.T. (2016) Pilot-scale semi-continuous cultivation ofmicroalgae Chlorella vulgaris in bubble column photobioreactor (BC-PBR): Hydrodynamics and gas-liquid mass transfer study. Algal Research, 15. pp. 65-76. ISSN 22119264

Khan, M.L. and Salleh, R. and Hemdi, M.A.B. (2016) Effect of protean career attitudes on organizational commitment of employees with moderating role of organizational career management. International Review of Management and Marketing, 6 (4). pp. 155-160. ISSN 21464405

Kutty, S.R.M. and Ezechi, E.H. and Khaw, S.G. and Lai, C.L. and Isa, M.H. and Salihi, I.U. (2016) Copper removal from biological treatment system using modified adsorbent derived from groundwater treatment plant sludge and rice husk. Jurnal Teknologi, 78 (5-3). pp. 53-57. ISSN 01279696

Khan, K. and Ullah, A. and Baharudin, B. (2016) Pattern and semantic analysis to improve unsupervised techniques for opinion target identification. Kuwait Journal of Science, 43 (1). pp. 129-149. ISSN 23074108

Keong, W.T. and Ahmad, F. and Sharif, S. and Moinser, M.A. (2016) Response surface methodology integrated modeling of glass fiber reinforced polymer delamination in high speed drilling. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4176-4185. ISSN 18196608

Kong, H. and Cheu, S.-C. and Othman, N.S. and Song, S.-T. and Saman, N. and Johari, K. and Mat, H. (2016) Surfactant modification of banana trunk as low-cost adsorbents and their high benzene adsorptive removal performance from aqueous solution. RSC Advances, 6 (29). pp. 24738-24751. ISSN 20462069

Khanh, D.V.K. and Vasant, P.M. and Elamvazuthi, I. and Dieu, V.N. (2016) Collaborative simulated annealing genetic algorithm for geometric optimization of thermo-electric coolers. Studies in Computational Intelligence, 611. pp. 155-183. ISSN 1860949X

L

Laghari, S.M. and Isa, M.H. and Laghari, A.J. (2016) Delignification of palm fiber by microwave assisted chemical pretreatment for improving energy efficiency. Malaysian Journal of Science, 35 (1). pp. 8-14. ISSN 13943065

Liu, W.H. and Wan Alwi, S.R. and Hashim, H. and Lim, J.S. and Mohammad Rozali, N.E. and Ho, W.S. (2016) Sizing of Hybrid Power System with varying current type using numerical probabilistic approach. Applied Energy, 184. pp. 1364-1373. ISSN 03062619

Lakshmanan, S. and Murugesan, T. (2016) Adsorption performance of coconut shell activated carbon for the removal of chlorate from chlor-alkali brine stream. Water Science and Technology, 74 (12). pp. 2819-2831. ISSN 02731223

Losetty, V. and Wilfred, C.D. and Shekar, M.C. (2016) Synthesis and study of ionic interactions by volumetric, transport, FT-IR and computational methods of alkyl imidazolium acetate ionic liquid with molecular solvents (DMSO, DMF & EG) at T = (293.15�363.15) K. Journal of Molecular Liquids, 224. pp. 480-491. ISSN 01677322

Lidu, S.R. and Mohamed, N.A. and Klemeš, J.J. and Varbanov, P.S. and Yusup, S. (2016) Evaluation of the energy saving opportunities for palm oil refining process: Sahabat Oil Products (SOP) in Lahad Datu, Malaysia. Clean Technologies and Environmental Policy, 18 (8). pp. 2453-2465. ISSN 1618954X

Lim, C.H. and Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusup, S. and Lam, H.L. (2016) Novel input-output prediction approach for biomass pyrolysis. Journal of Cleaner Production, 136. pp. 51-61. ISSN 09596526

Lai, G.T. and Reza, M.S. and Rafek, A.G. and Serasa, A.S. and Hussin, A. and Ern, L.K. (2016) Assessment of ultimate bearing capacity based on the hoek-brown failure criterion. Sains Malaysiana, 45 (11). pp. 1603-1607. ISSN 01266039

Lethesh, K.C. and Shah, S.N. and Ayodele, O.B. and Mutalib, M.I.A. and Uemura, Y. (2016) Nitrile-functionalized azepanium ionic liquids: Synthesis characterization and thermophysical properties. Journal of Molecular Liquids, 221. pp. 1140-1144. ISSN 01677322

Lee, H.E. and Liew, M.S. and Mardi, N.H. and Na, K.L. and Toloue, I. and Wong, S.K. (2016) Development of jacket platform tsunami risk rating system in waters offshore North Borneo. Journal of Marine Science and Application, 15 (3). pp. 307-320. ISSN 16719433

Lai, L.S. and Yeong, Y.F. and Chew, T.L. and Lau, K.K. and Azmi, M.S. (2016) CO2 and CH4 gas permeation study via zeolitic imidazolate framework (ZIF)-8 membrane. Journal of Natural Gas Science and Engineering, 34. pp. 509-519. ISSN 18755100

Lim, L.G. and Pao, W.K.S. and Hamid, N.H. and Tang, T.B. (2016) Design of helical capacitance sensor for holdup measurement in two-phase stratified flow: A sinusoidal function approach. Sensors (Switzerland), 16 (7). ISSN 14248220

Lam, M.K. and Lee, K.T. and Khoo, C.G. and Uemura, Y. and Lim, J.W. (2016) Growth kinetic study of chlorella vulgaris using lab-scale and pilot-scale photobioreactor: Effect of CO2 concentration. Journal of Engineering Science and Technology, 11 (Specia). pp. 73-87. ISSN 18234690

Lin, S.C. and Al-Kayiem, H.H. (2016) Evaluation of copper nanoparticles - Paraffin wax compositions for solar thermal energy storage. Solar Energy, 132. pp. 267-278. ISSN 0038092X

Lieu, T. and Yusup, S. and Moniruzzaman, M. (2016) Kinetic study on microwave-assisted esterification of free fatty acids derived from Ceiba pentandra Seed Oil. Bioresource Technology, 211. pp. 248-256. ISSN 09608524

Latiff, N.M.A. and NikAbdMalik, N. and Latiff, A.H.A. (2016) A green clustering protocol for mobile sensor network using particle swarm optimization. Journal of Electronic Science and Technology, 14 (2). pp. 160-169. ISSN 1674862X

Lemma, T.A. and Hashim, F.M. and Abd Majid, M.A.B. (2016) An integrated approach to industrial gas turbine diagnostics and reliability montoring. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7799-7805. ISSN 18196608

Liu, H. and Zhang, J. and Shafiai, S.H. (2016) A second-order treatment to the wet-dry interface of shallow water. Journal of Hydrology, 536. pp. 514-523. ISSN 00221694

Lai, G.T. and Rafek, A.G. and Serasa, A.S. and Hussin, A. and Ern, L.K. (2016) Use of ultrasonic velocity travel time to estimate uniaxial compressive strength of granite and schist in Malaysia. Sains Malaysiana, 45 (2). pp. 185-193. ISSN 01266039

Lock, S.S.M. and Lau, K.K. and Sow Mei, I.L. and Shariff, A.M. and Yeong, Y.F. (2016) Succession of states mathematical algorithm for incorporation of unit operation in iCON® process simulator applied in natural gas purification. Indian Journal of Science and Technology, 9 (38). ISSN 09746846

Lemaître, G. and Rastgoo, M. and Massich, J. and Cheung, C.Y. and Wong, T.Y. and Lamoureux, E. and Milea, D. and Mériaudeau, F. and Sidibé, D. (2016) Classification of SD-OCT Volumes Using Local Binary Patterns: Experimental Validation for DME Detection. Journal of Ophthalmology, 2016. ISSN 2090004X

Low, S.-N. and Kamaruddin, S. and Azid, I.B.H.A. (2016) An integrated simulation with design on experiment approach for shop floor improvement solution selections. European Journal of Industrial Engineering, 10 (4). pp. 479-498. ISSN 17515254

Liñán, E. and Gámez Vintaned, J.A. and Pillola, G.L. and Gozalo, R. (2016) Upper Ovetian trilobites from Spain and their implications for the palaeobiogeography and correlation of the Cambrian Stage 3 in Gondwana. Tectonophysics, 681. pp. 46-57. ISSN 00401951

Lee, S.-P. and Mellon, N. and Lau, T.K. and Shariff, A.M. and Leveque, J.-M. (2016) Synthesis and characterization of covalent organic polymer. Key Engineering Materials, 701. pp. 270-274. ISSN 10139826

Lock, S.S.M. and Lau, K.K. and Lock, I.S.M. and Shariff, A.M. and Yeong, Y.F. and Abdullah, B. (2016) Mathematical modeling of thickness dependent physical aging in polymeric membranes. Key Engineering Materials, 701. pp. 275-280. ISSN 10139826

Lemma, T.A. and Hashim, F.M. and Majid, M.A.B.A. (2016) Short-term and multi-state reliability model for an industrial gas turbine. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8715-8720. ISSN 18196608

Langove, N. and Isha, A.S.N.B. and Javaid, M.U. (2016) The mediating effect of employee well-being in relation to role stressors and turnover intention: A conceptual study. International Review of Management and Marketing, 6 (4). pp. 150-154. ISSN 21464405

Lotfi, M. and Moniruzzaman, M. and Abdul Mutalib, M.I.B. and Rajabi, M.S. (2016) Predicting the solubility of pharmaceutical compound in ionic liquids using COSMo-RS model. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1618-1622. ISSN 18196608

Lai, L.S. and Yeong, Y.F. and Lau, K. and Shariff, A.M. (2016) Gas permeation study of H2 and N2 through zeolitic imidazolate frameworks-8 membrane synthesized viamicrowave-assisted secondary solvothermal growth. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1647-1652. ISSN 18196608

Leong, S.Y. and Kutty, S.R.M. and Malakahmad, A. and Tan, C.K. (2016) Feasibility study of biodiesel production using lipids of Hermetia illucens larva fed with organic waste. Waste Management, 47. pp. 84-90. ISSN 0956053X

Lee, K. and Saipolbahri, Z.A.B. and Soleimani, H. and Zaid, H.M. and Guan, B.H. and Ching, D.L.C. (2016) Effect of zinc oxide nanoparticle sizes on viscosity of nanofluid for application in enhanced oil recovery. Journal of Nano Research, 38. pp. 36-39. ISSN 16625250

M

Mohammed, I.Y. and Abakr, Y.A. and Musa, M. and Yusup, S. and Singh, A. and Kazi, F.K. (2016) Valorization of Bambara groundnut shell via intermediate pyrolysis: Products distribution and characterization. Journal of Cleaner Production, 139. pp. 717-728. ISSN 09596526

Meng, C.C. and Pubellier, M. and Abdeldayem, A. and Sum, C.W. (2016) Deformation styles and structural history of the paleozoic limestone, kinta valley, Perak, Malaysia. Bulletin of the Geological Society of Malaysia, 62. pp. 37-45. ISSN 01266187

Mohammad Rozali, N.E. and Wan Alwi, S.R. and Manan, Z.A. and Klemeš, J.J. (2016) Process Integration for Hybrid Power System supply planning and demand management � A review. Renewable and Sustainable Energy Reviews, 66. pp. 834-842. ISSN 13640321

Moradi, B. and Ayoub, M. and Awang, M. (2016) Modification of Ramey's model for carbon dioxide injection in the vicinity of critical point. Journal of CO2 Utilization, 16. pp. 218-224. ISSN 22129820

Mulyani, S. and Hassan, R. and Anugrah, F. (2016) The critical success factors for the use of information systems and its impact on the organizational performance. International Business Management, 10 (4). pp. 552-560. ISSN 19935250

Mohd Shariff, A. and Abdul Aziz, H. and Abdul Majid, N.D. (2016) Way forward in Process Safety Management (PSM) for effective implementation in process industries. Current Opinion in Chemical Engineering, 14. pp. 56-60. ISSN 22113398

Muhammad, G. and Hussain, M. and Al-Hammadi, M. and Aboalsamh, H. and Mathkour, H. and Malik, A.S. (2016) Short-term and long-term memory analysis of learning using 2D and 3D educational contents. Behaviour and Information Technology, 35 (11). pp. 958-967. ISSN 0144929X

Mahgoub, M.I. and Padmanabhan, E. and Abdullatif, O.M. (2016) Sedimentological reservoir characteristics of the Paleocene fluvial/lacustrine Yabus Sandstone, Melut Basin, Sudan. Journal of African Earth Sciences, 123. pp. 75-88. ISSN 1464343X

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2016) Composite blending of ionic liquid�poly(ether sulfone) polymeric membranes: Green materials with potential for carbon dioxide/methane separation. Journal of Applied Polymer Science, 133 (39). ISSN 00218995

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Akil, H.M. (2016) Particulate composites based on ionic liquid-treated oil palm fiber and thermoplastic starch adhesive. Clean Technologies and Environmental Policy, 18 (7). pp. 2217-2226. ISSN 1618954X

Miya, H.S. and Ibrahim, R.B. and Saad, N.B. and Asirvadam, V.S. and Chung, T.D. (2016) WirelessHART process control with smith predictor compensator. Advanced Science Letters, 22 (10). pp. 2676-2680. ISSN 19366612

Muhammad, M.M. and Alias, M.N. and Yusof, K.W. and Mustafa, M.R.U. and Ghani, A.A. (2016) Suitability of bioengineering channels in erosion control: Application to urban stormwater drainage systems. Advances and Applications in Fluid Mechanics, 19 (4). pp. 765-785. ISSN 09734686

Mandal, P.C. and Nagarajan, T. (2016) Kinetics and reaction pathways of total acid number reduction of cyclopentane carboxylic acid using subcritical methanol. Polish Journal of Chemical Technology, 18 (3). pp. 44-49. ISSN 15098117

Mahat, S.Q. and Saaid, I.M. and Lal, B. (2016) Green silica scale inhibitors for Alkaline-Surfactant-Polymer flooding: a review. Journal of Petroleum Exploration and Production Technology, 6 (3). pp. 379-385. ISSN 21900558

Mathew, M.J. and Menier, D. and Siddiqui, N. and Kumar, S.G. and Authemayou, C. (2016) Active tectonic deformation along rejuvenated faults in tropical Borneo: Inferences obtained from tectono-geomorphic evaluation. Geomorphology, 267. pp. 1-15. ISSN 0169555X

Mumtaz, W. and Vuong, P.L. and Xia, L. and Malik, A.S. and Rashid, R.B.A. (2016) Automatic diagnosis of alcohol use disorder using EEG features. Knowledge-Based Systems, 105. pp. 48-59. ISSN 09507051

Mohmmed, A.O. and Nasif, M.S. and Al-Kayiem, H.H. and Time, R.W. (2016) Measurements of translational slug velocity and slug length using an image processing technique. Flow Measurement and Instrumentation, 50. pp. 112-120. ISSN 09555986

Mohammad Rozali, N.E. and Wan Alwi, S.R. and Ho, W.S. and Manan, Z.A. and Klemeš, J.J. (2016) Integration of diesel plant into a hybrid power system using power pinch analysis. Applied Thermal Engineering, 105. pp. 792-798. ISSN 13594311

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Khan, M.I. and Khan, M.J. (2016) Kinetic modeling and optimization of biomass pyrolysis for bio-oil production. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 38 (14). pp. 2065-2071. ISSN 15567036

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Akil, H.M. (2016) Pretreatment of oil palm biomass with ionic liquids: A new approach for fabrication of green composite board. Journal of Cleaner Production, 126. pp. 677-685. ISSN 09596526

Memon, M.A. and Salleh, R. and Baharom, M.N.R. (2016) The link between training satisfaction, work engagement and turnover intention. European Journal of Training and Development, 40 (6). pp. 407-429. ISSN 20469012

Mushtaq, M. and Tan, I.M. and Sagir, M. and Suleman Tahir, M. and Pervaiz, M. (2016) A novel hybrid catalyst for the esterification of high FFA in Jatropha oil for biodiesel production. Grasas y Aceites, 67 (3). ISSN 00173495

Mathew, M.J. and Menier, D. and Siddiqui, N. and Ramkumar, M. and Santosh, M. and Kumar, S. and Hassaan, M. (2016) Drainage basin and topographic analysis of a tropical landscape: Insights into surface and tectonic processes in northern Borneo. Journal of Asian Earth Sciences, 124. pp. 14-27. ISSN 13679120

Mahmud, A. and Bt Megat Yusoff, P.S.M. and Ahmad, F. (2016) Processing of rice husk tobio-silica nanoparticlesthrough thermal combustion. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7650-7654. ISSN 18196608

Memon, M.A. and Nor, K.M. and Salleh, R. (2016) Personality Traits Influencing Knowledge Sharing in Student-Supervisor Relationship: A Structural Equation Modelling Analysis. Journal of Information and Knowledge Management, 15 (2). ISSN 02196492

Mazinani, I. and Ismail, Z.B. and Shamshirband, S. and Hashim, A.M. and Mansourvar, M. and Zalnezhad, E. (2016) Estimation of tsunami bore forces on a coastal bridge using an Extreme Learning Machine. Entropy, 18 (5). ISSN 10994300

Mark Amok, J.O. and Mohamad Saad, N. (2016) Error rate performance analysis of multiantenna MC DS-CDMA system over η-μ Frequency selective fading channels with arbitrary parameters. AEU - International Journal of Electronics and Communications, 70 (5). pp. 517-529. ISSN 14348411

Mohamed, N.M. and Irshad, M.I. and Abdullah, M.Z. and Saheed, M.S.M. (2016) Novel growth of carbon nanotubes on nickel nanowires. Diamond and Related Materials, 65. pp. 59-64. ISSN 09259635

Milano, J. and Ong, H.C. and Masjuki, H.H. and Chong, W.T. and Lam, M.K. and Loh, P.K. and Vellayan, V. (2016) Microalgae biofuels as an alternative to fossil fuel for power generation. Renewable and Sustainable Energy Reviews, 58. pp. 180-197. ISSN 13640321

Mumtaz, A. and Mohamed, N.M. and Mazhar, M. and Ehsan, M.A. and Mohamed Saheed, M.S. (2016) Core-Shell Vanadium Modified Titania@β-In2S3 Hybrid Nanorod Arrays for Superior Interface Stability and Photochemical Activity. ACS Applied Materials and Interfaces, 8 (14). pp. 9037-9049. ISSN 19448244

Mohammed, B.S. and Awang, A.B. and Wong, S.S. and Nhavene, C.P. (2016) Properties of nano silica modified rubbercrete. Journal of Cleaner Production, 119. pp. 66-75. ISSN 09596526

Muhammad, N. and Gao, Y. and Iqbal, F. and Ahmad, P. and Ge, R. and Nishan, U. and Rahim, A. and Gonfa, G. and Ullah, Z. (2016) Extraction of biocompatible hydroxyapatite from fish scales using novel approach of ionic liquid pretreatment. Separation and Purification Technology, 161. pp. 129-135. ISSN 13835866

Menier, D. and Estournès, G. and Mathew, M.J. and Ramkumar, M. and Briend, C. and Siddiqui, N. and Traini, C. and Pian, S. and Labeyrie, L. (2016) Relict geomorphological and structural control on the coastal sediment partitioning, North of Bay of Biscay. Zeitschrift fur Geomorphologie, 60 (1). pp. 67-74. ISSN 03728854

Majeed, Z. and Mansor, N. and Man, Z. and Wahid, S.A. (2016) Lignin reinforcement of urea-crosslinked starch films for reduction of starch biodegradability to improve slow nitrogen release properties under natural aerobic soil condition. E-Polymers, 16 (2). pp. 159-170. ISSN 16187229

Mubashir, M. and Yeong, Y.F. and Lau, K.K. (2016) Ultrasonic-assisted secondary growth of deca-dodecasil 3 rhombohedral (DD3R) membrane and its process optimization studies in CO2/CH4 separation using response surface methodology. Journal of Natural Gas Science and Engineering, 30. pp. 50-63. ISSN 18755100

Mohammed, B.S. and Aswin, M. and Beatty, W.H. and Hafiz, M. (2016) Longitudinal shear resistance of PVA-ECC composite slabs. Structures, 5. pp. 247-257. ISSN 23520124

Macdonald, S. and Steen, J. and Shazi, R. (2016) Aiming for Excellence: Reflections on the Advanced Institute of Management Research and its Elite. British Journal of Management, 27 (2). pp. 438-454. ISSN 10453172

Matheswaran, P. and Wilfred, C.D. and Kurnia, K.A. and Ramli, A. (2016) Overview of Activity Coefficient of Thiophene at Infinite Dilution in Ionic Liquids and their Modeling Using COSMO-RS. Industrial and Engineering Chemistry Research, 55 (3). pp. 788-797. ISSN 08885885

Mahesh, K. and Nallagownden, P. and Elamvazuthi, I. (2016) Advanced Pareto front non-dominated sorting multi-objective particle swarm optimization for optimal placement and sizing of distributed generation. Energies, 9 (12). ISSN 19961073

Mansor, R. and Mat Kasim, M. and Othman, M. (2016) A weighted subsethood mamdani fuzzy rules based system rule extraction (MFRBS-WSBA) for forecasting electricity load demand - A framework. Journal of Telecommunication, Electronic and Computer Engineering, 8 (8). pp. 97-102. ISSN 21801843

Mahdi, F.P. and Vasant, P. and Kallimani, V. and Fai, P.S.Y. and Wadud, M.A. (2016) Emission dispatch problem with cubic function considering transmission loss using particle swarm optimization. Journal of Telecommunication, Electronic and Computer Engineering, 8 (12). pp. 17-21. ISSN 21801843

Mubashir, M. and Fong, Y.Y. and Keong, L.K. (2016) Synthesis of deca-dodecasil 3 rhombohedral (dd3r) membranes via secondary hydrothermal growth method and their gas permeation performance in co2 and ch4. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11145-11149. ISSN 18196608

Muhammad, M.B and Sarwar, U. and Tahan, M.R. and Abdul Karim, Z.A. (2016) Fault diagnostic model for rotating machinery based on principal component analysis and neural network. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14327-14331. ISSN 18196608

Mohmmed, A.O. and Nasif, M.S. and Al-Kayiem, H.H. (2016) A study on slug induced stresses using file-based coupling technique. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14208-14213. ISSN 18196608

Majid, M.A.A. and Nordin, A. and Mokhtar, A.A. (2016) Exergoeconomic power cost rates model for onshore and offshore gas turbines. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14322-14326. ISSN 18196608

Muhsan, A.S. and Mohamed, N.M. and Ahmad, F. and Albarody, T.M.B. and Shahid, M.U. (2016) Effects of sintering parameters on the microstructural characteristics of cu/cnts nanocomposites. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14294-14298. ISSN 18196608

Moni, M.N.Z. and Sulaiman, S.A. and Raja, Y.S. and Karunamurthy, K. and Inayat, M. and Bou-Rabee, M.A. (2016) Investigation of the relationship between moisture content and density of selected Malaysian biomass. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2111-2125. ISSN 22894659

Mahgoub, B.K.M. and Hassan, S. and Sulaiman, S.A. and Mamat, R. and Abdul Adam, A. and Hagos, F.Y. (2016) Dual fuel combustion in a CI engine powered by blended diesel-biodiesel fuel and simulated gasification gas. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12947-12952. ISSN 18196608

Masood, R. and Gilani, S.I.U.H. and Al-Kayiem, H.H. (2016) A simplified design procedure of parabolic trough solar field for industrial heating applications. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13065-13071. ISSN 18196608

Mahmud, A. and Megat-Yusoff, P.S.M. and Ahmad, F. and Farezzuan, A.A. (2016) Acid leaching as efficient chemical treatment for rice husk in production of amorphous silica nanoparticles. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13384-13388. ISSN 18196608

Mokhtar, A.A. and Misren, M.M. and Muhammad, M. and Hussin, H. (2016) RAM analysis of crude oil transfer pumps using dominant failure mode. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13348-13352. ISSN 18196608

Mohd. Nor, M.F. and Hassan, S. and Zakariya, A. and Fadzil, F.A. (2016) Preliminary study of renewable Pico-Mini hydro electrification in Royal Belum, Perak. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13313-13318. ISSN 18196608

Meyghani, B. and Awang, M. and Emamian, S. (2016) A comparative study of finite element analysis for friction stir welding application. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12984-12989. ISSN 18196608

Mulubrhan, F. and Mokhtar, A.A.B. and Muhammad, M. (2016) Replacement analysis using probabilistic life cycle costing. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13042-13048. ISSN 18196608

Mohamed Ibrahim, M. and Hassan, M.F. (2016) Construction of customizable soa security framework using artificial neural networks. Jurnal Teknologi, 78 (12-3). pp. 69-75. ISSN 01279696

Mohyaldinn, M.E. and Hamid, R. and Adil, M. and Musa, O. (2016) Study of the effect of flow modifiers on the operation of Heglig-Port Sudan Pipeline. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 259-267. ISSN 18196608

Moayedfar, M. and Rani, A.M.A. and Emamian, S.S. and Haghighizadeh, A. and Jafari, N. (2016) Manufacture of medical orthopaedic implants using computed tomography imaging and rapid prototyping. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 177-180. ISSN 18196608

Mushtaq, S. and Baharom, M.B. (2016) Electromagnets arrangement for electromagnetic windshield wipers - Proposal and analysis. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 150-154. ISSN 18196608

Mohammed, B.S. and Nuruddin, M.F. and Aswin, M. and Mahamood, N. and Al-Mattarneh, H. (2016) Structural Behavior of Reinforced Self-Compacted Engineered Cementitious Composite Beams. Advances in Materials Science and Engineering, 2016. ISSN 16878434

Memon, M.B. and Azahar, S.B. and Qazi, W.H. (2016) Determination of correlation between laboratory based electrical resistivity and bulk density of compacted laterite soil. Indian Journal of Science and Technology, 9 (39). ISSN 09746846

Mohammad Rozali, N.E. and Wan Alwi, S.R. and Manan, Z.A. and Klemeš, J.J. (2016) Sensitivity analysis of hybrid power systems using Power Pinch Analysis considering Feed-in Tariff. Energy, 116. pp. 1260-1268. ISSN 03605442

Mengal, A.N. and Karuppanan, S. and Farhood, N.H. (2016) Compressive behaviour of basalt FRP and basalt-carbon hybrid frp laminates. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11994-11998. ISSN 18196608

Mahmoud, H.R.S. and Hussain, P.B. and Ismail, M.C. (2016) Surface properties of nitrided layer on aisi 316l austenitic stainless steel produced by varied time low-temperature thermochemical treatments. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12099-12102. ISSN 18196608

Mauliddin, D.S. and Ginta, T.L. (2016) The effect of repeated welding cycles on the microstructure and ferrite content of 25cr super duplex stainless steel weld metal by automatic orbital tig welding. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11982-11987. ISSN 18196608

Mohammad, S.T. and Al-Kayiem, H.H. and Assadi, M.K. (2016) Developed mathematical model of solar thermal parabolic trough power plant at universiti teknologi petronas. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12140-12145. ISSN 18196608

Mailabari, R.J. and Mamat, O. and Baig, Z. (2016) Dispersion of carbon black in epoxy resin and the electrical property of the nanocomposite. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12176-12180. ISSN 18196608

Mohammed, S.E. and Baharom, M.B. and Rashid, A. and Aziz, A. (2016) Thermodynamic analysis of a single cylinder crank-rocker engine. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12239-12246. ISSN 18196608

Md Khir, M.H. and Kumar, A. and Wan Yusoff, W.I. (2016) Accelerometer Sensor Specifications to Predict Hydrocarbon Using Passive Seismic Technique. Journal of Sensors, 2016. ISSN 1687725X

Mian, M.U. and Dennis, J.O. and Khir, M.H.B.M. and Ahmed, M.G.A. and Rabih, A.A.S. and Tang, T.B. (2016) Optical and capacitive characterization of MEMS magnetic resonator. IEICE Electronics Express, 13 (18). ISSN 13492543

Mohamad, H. and Tee, B.P. and Ang, K.A. and Chong, M.F. (2016) Characterizing anomalies in distributed strain measurements of cast-in-situ bored piles. Jurnal Teknologi, 78 (8-5). pp. 75-82. ISSN 01279696

Mohan Kudiri, K. and Md. Said, A. and Nayan, M.Y. (2016) Hybrid fusion of face and speech information for bimodal emotion estimation. Jurnal Teknologi, 78 (8-2). pp. 26-34. ISSN 01279696

Mengal, A.N. and Karuppanan, S. (2016) Study on interlaminar shear strength of angle ply oriented basalt-carbon hybrid composite. Key Engineering Materials, 701. pp. 300-306. ISSN 10139826

Majid, M.A.A. and Fudzin, F. and Mokhtar, A.A. (2016) Replacement model for robots in automotive assembly plant. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8562-8567. ISSN 18196608

Mauliddin, D.S. and Ginta, T.L. (2016) The effect of repeated welding cycles on the properties of 25Cr super duplex stainless steel by automatic orbital TIG welding. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8754-8758. ISSN 18196608

Muzammel, M. and Yusoff, M.Y. and Saad, M.N.M. and Malik, A.S. (2016) Audio visual tracking of a speaker based on FFT and Kalman filter. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8947-8951. ISSN 18196608

Memon, M.A. and Ting, H. and Salleh, R. and Ali, J.K. and Yacob, Y. (2016) Level of stress and job satisfaction among call operators: A case of Malaysian telecommunication sector. International Review of Management and Marketing, 6 (3). pp. 442-447. ISSN 21464405

Mei, I.L.S. and Lock, S.S.M. and Vo, D.-V.N. and Abdullah, B. (2016) Thermo-catalytic methane decomposition for hydrogen production: Effect of palladium promoter on Ni-based catalysts. Bulletin of Chemical Reaction Engineering and Catalysis, 11 (2). pp. 191-199. ISSN 19782993

Mehmod, T. and Rais, H.B.M. (2016) Ant colony optimization and feature selection for intrusion detection. Lecture Notes in Electrical Engineering, 387. pp. 305-312. ISSN 18761100

Malik, U. and Ching, D.L.C. and Daud, H. (2016) Seismic boundary reflection approximation by autoregression. Applied Mathematical Sciences, 10 (29-32). pp. 1509-1523. ISSN 1312885X

Moussavi Alashloo, S.Y. and Ghosh, D.P. and Bashir, Y. and Wan Ismail, W.Y. (2016) Influence of Error in Estimating Anisotropy Parameters on VTI Depth Imaging. International Journal of Geophysics, 2016. ISSN 1687885X

Malakahmad, A. and Tan, S. and Yavari, S. (2016) Valorization of Wasted Black Tea as a Low-Cost Adsorbent for Nickel and Zinc Removal from Aqueous Solution. Journal of Chemistry, 2016. ISSN 20909063

Mamat, O. and Mailabari, R.J. (2016) Characterization and production of conductive filler from oil palm ash and its performance in epoxy matrix. International Journal of Engineering and Technology, 8 (2). pp. 966-973. ISSN 23198613

Masood, R. and Gilani, S.I.U.-H. and Al-Kayiem, H.H. (2016) Thermal output analysis of a designed parabolic trough solar field for moderate temperature industrial load. International Journal of Engineering and Technology, 8 (2). pp. 1018-1024. ISSN 23198613

Muhammad, G. and Altuwaijri, G. and Alsulaiman, M. and Ali, Z. and Mesallam, T.A. and Farahat, M. and Malki, K.H. and Al-Nasheri, A. (2016) Automatic voice pathology detection and classification using vocal tract area irregularity. Biocybernetics and Biomedical Engineering, 36 (2). pp. 309-317. ISSN 02085216

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2016) The effect of rocker ratio and connecting rod length on the performance of a crank-rocker mechanism with an extended rocker input link. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4221-4227. ISSN 18196608

Memon, M.B. and Osman, S.B.A.B.S. and Qazi, W.H. (2016) Effects of shear strength properties on electrical resistivity of compacted laterite soil: A conceptual model. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3663-3667. ISSN 18196608

Memon, I.A. and Napiah, M. and Talpur, M.A.H. and Hakro, M.R. (2016) Mode choice modelling method to shift car travelers towards park and ride service. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3677-3683. ISSN 18196608

Mustafa, M.R. (2016) Modeling daily suspended sediments of a hyper-concentrated river in Malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2141-2145. ISSN 18196608

Matcha, W. and Rambli, D.R.A. (2016) Time on task for collaborative augmented reality in science experiment. Jurnal Teknologi, 78 (2-2). pp. 137-144. ISSN 01279696

Mohammed, B.S. and Nuruddin, M.F. and Yogeswary, A. and Dayalan, P. (2016) Properties of high permeable concrete utilizing pozzolanic materials. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1457-1466. ISSN 18196608

Muhammad, I.D. and Awang, M. (2016) Modeling the bending behavior of single-walled cubic zirconia nanotubes. Journal of Nano Research, 38. pp. 88-95. ISSN 16625250

Muthusamy, Y. and Kadirgama, K. and Rahman, M.M. and Ramasamy, D. and Sharma, K.V. (2016) Wear analysis when machining AISI 304 with ethylene glycol/TIO2 nanoparticle-based coolant. International Journal of Advanced Manufacturing Technology, 82 (1-4). pp. 327-340. ISSN 02683768

N

Nasvi, M.C.M. and Rathnaweera, T.D. and Padmanabhan, E. (2016) Geopolymer as well cement and its mechanical integrity under deep down-hole stress conditions: application for carbon capture and storage wells. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 2 (4). pp. 245-256. ISSN 23638419

Nurika, O. and Hassan, M.F. and Zakaria, N. and Jung, L.T. (2016) Genetic algorithm optimized receiver-oriented packet clustering in multi-buffer network card. Advanced Science Letters, 22 (10). pp. 2914-2917. ISSN 19366612

Nurika, O. and Hassan, M.F. and Zakaria, N. and Jung, L.T. (2016) Genetic algorithm optimized network in cloud data centre. Advanced Science Letters, 22 (10). pp. 2705-2709. ISSN 19366612

Naz, M.Y. and Ismail, N.I. and Sulaiman, S.A. and Shukrullah, S. (2016) ABRASIVE EROSION STUDY on S45C CARBON STEEL USING SAND BLASTING TECHNIQUE. Surface Review and Letters, 23 (5). ISSN 0218625X

Noordin, N.A.K.N. and Arshad, N.I. and Kalid, K.S. (2016) A preliminary study on reward management system model for encouraging employee�s knowledge sharing behavior. Journal of Theoretical and Applied Information Technology, 91 (1). pp. 107-116. ISSN 19928645

Naz, M.Y. and Shukrullah, S. and Sulaiman, S.A. and Najeeb-Ur-Rehman and Khan, Y. and Ghaffar, A. and Ullah, S. (2016) Investigations on spatial distribution of low temperature plasma parameters using NiCr wire probe diagnostic. Measurement: Journal of the International Measurement Confederation, 91. pp. 194-200. ISSN 02632241

Narahari, M. and Kamran, M. (2016) MHD natural convection flow past an impulsively started infinite vertical porous plate with Newtonian heating in the presence of radiation. International Journal of Numerical Methods for Heat and Fluid Flow, 26 (6). pp. 1932-1953. ISSN 09615539

Nadeem, S. and Mutalib, M.I.A. and Shaharun, M.S. (2016) One pot syntheses and characterization of MESO-5, 10, 15, 20-copper tetraphenylporphyrin. Rasayan Journal of Chemistry, 9 (3). pp. 309-314. ISSN 09741496

Ng, Z.-G. and Lim, J.-W. and Daud, H. and Ng, S.-L. and Bashir, M.J.K. (2016) Reassessment of adsorption-reduction mechanism of hexavalent chromium in attaining practicable mechanistic kinetic model. Process Safety and Environmental Protection, 102. pp. 98-105. ISSN 09575820

Naz, M.Y. and Sulaiman, S.A. (2016) PTV profiling of particles motion from the top and side of a swirling fluidized bed. Journal of Instrumentation, 11 (5). ISSN 17480221

Nawaz, F. and Jeoti, V. (2016) GREEN protocol: gradient based energy efficient routing with network coding capacity. Telecommunication Systems, 62 (1). pp. 135-147. ISSN 10184864

Nasrullah, A. and Khan, H. and Khan, A.S. and Muhammad, N. and Man, Z. and Khan, F.U. and Ullah, Z. (2016) Calligonum polygonoides biomass as a low-cost adsorbent: surface characterization and methylene blue adsorption characteristics. Desalination and Water Treatment, 57 (16). pp. 7345-7357. ISSN 19443994

Nazif, A. and Mohammed, N.I. and Malakahmad, A. and Abualqumboz, M.S. (2016) Application of Step Wise Regression Analysis in Predicting Future Particulate Matter Concentration Episode. Water, Air, and Soil Pollution, 227 (4). ISSN 00496979

Naz, M.Y. and Sulaiman, S.A. (2016) Slow release coating remedy for nitrogen loss from conventional urea: A review. Journal of Controlled Release, 225. pp. 109-120. ISSN 01683659

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Rehman, N.U. and Khan, Y. (2016) Test of a new tip material for Langmuir probe diagnostic. Journal of Applied Mechanics and Technical Physics, 57 (2). pp. 211-218. ISSN 00218944

Nawaz, F. and Jeoti, V. (2016) Performance assessment of WirelessHART technology for its implementation in dense reader environment. Computing, 98 (3). pp. 257-277. ISSN 0010485X

Nagrath, V. and Morel, O. and Malik, A.S. and Saad, M.N.B.M. and Meriaudeau, F. (2016) Peer to peer trade in HTM5 meta model for agent oriented cloud robotic systems. Peer-to-Peer Networking and Applications, 9 (2). pp. 328-343. ISSN 19366442

Nasim, W. and Belhouchette, H. and Tariq, M. and Fahad, S. and Hammad, H.M. and Mubeen, M. and Munis, M.F.H. and Chaudhary, H.J. and Khan, I. and Mahmood, F. and Abbas, T. and Rasul, F. and Nadeem, M. and Bajwa, A.A. and Ullah, N. and Alghabari, F. and Saud, S. and Mubarak, H. and Ahmad, R. (2016) Correlation studies on nitrogen for sunflower crop across the agroclimatic variability. Environmental Science and Pollution Research, 23 (4). pp. 3658-3670. ISSN 09441344

Nasir Shah, S. and Kallidanthiyil Chellappan, L. and Gonfa, G. and Mutalib, M.I.A. and Pilus, R.B.M. and Bustam, M.A. (2016) Extraction of naphthenic acid from highly acidic oil using phenolate based ionic liquids. Chemical Engineering Journal, 284. pp. 487-493. ISSN 13858947

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Rehman, N.U. and Sagir, M. (2016) A Low-Frequency Dielectric Barrier Discharge System Design for Textile Treatment. Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, 46 (1). pp. 104-109. ISSN 15533174

Noor, N.F.M. and Awang, M. (2016) Overview of underwater friction stir welding. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14319-14321. ISSN 18196608

Nordin, A. and Majid, M.A.A. (2016) Parametric study on the effects of pinch and approach points on heat recovery steam generator performance at a district cooling system. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2134-2144. ISSN 22894659

Negash, B.M. and Tufa, L.D. and Marappagounder, R. and Awang, M.B. (2016) Performance prediction of a reservoir under gas injection, using output error model. Contemporary Engineering Sciences, 9 (29-32). pp. 1479-1489. ISSN 13136569

Nik Yusoff, N.H. and Mamat, O. and Isa, M.C. (2016) Electrode position of nickel-cobalt/alumina (Ni-Co/Al2O3) composite coatings: A current approach. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13331-13337. ISSN 18196608

Nasif, M.S. and Fekry, M. and Ismail, F.B. (2016) CFD investigation on the effect of varying fire sprinkler orientation on sprinkler activation time. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12919-12922. ISSN 18196608

Niazi, U.M. and Nasif, M.S. and Bin Muhammad, M. and Imran, M. (2016) Modeling of pool fire and injury prediction considering different wind speeds and directions in offshore platform. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13000-13005. ISSN 18196608

Nasif, M.S. and Roslan, R. (2016) Effect of varying roof run-off coefficient values and tank size on rainwater harvesting system's water savings in Malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12937-12941. ISSN 18196608

Noor, A.M.Z. and Sara, T. and Maizatul, S.S. (2016) Effects of Nb promoter on the properties of Cu/ZnO/SBA-15 catalyst and performance in methanol production. Key Engineering Materials, 708. pp. 94-97. ISSN 10139826

Nasif, M.S. and Kadhim, S.K. and Al-Kayiem, H.H. and Al Waked, R. (2016) Using one way fluid structure interaction coupling to investigate the effect of blood flow on the bileaflet mechanical heart valve structure. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11971-11973. ISSN 18196608

Nordin, N. and Karim, Z.A.A. and Othman, S. and Raghavan, V.R. and Seri, S.M. and Shaari, M.F. and Adzila, S. (2016) Validation by piv of the numerical study of flow in the two-dimensional turning diffuser. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11948-11953. ISSN 18196608

Nor, M.A.M. and Al-Kayiem, H.H. and Lemma, T.A. (2016) CFD analysis of swirly flow field in conical and cylindrical cyclones for deoiling applications. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12262-12267. ISSN 18196608

Noorzi, M.I. and Faye, I. (2016) A review of EEG signal simulation methods. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9950 L. pp. 599-608. ISSN 03029743

Naziatul Shima, A.A. and Wan Fatimah, W.A. and Ahmad Sobri, H. (2016) The design of mobile numerical application development lifecyle for children with autism. Jurnal Teknologi, 78 (9-3). pp. 13-20. ISSN 01279696

Negash, B.M. and Tufa, L.D. and Ramasamy, M. (2016) Performance prediction of a reservoir under gas injection using Box-Jenkins model. International Journal of Oil, Gas and Coal Technology, 12 (3). pp. 285-301. ISSN 17533309

Nasir, R. and Mukhtar, H. and Man, Z. (2016) Prediction of gas transport across amine mixed matrix membranes with ideal morphologies based on the Maxwell model. RSC Advances, 6 (36). pp. 30130-30138. ISSN 20462069

Nadeesha Chandraseana, D.C. and Wan Yusof, K. and Ul Mustafa, M.R. and Mustaffa, Z. and Umar, S.I. (2016) A theoretical discussion and case study on the development of smart storm drainage unit for compact cities. Jurnal Teknologi, 78 (5-3). pp. 85-90. ISSN 01279696

Naubi, I. and Zardari, N.H. and Shirazi, S.M. and Ibrahim, N.F.B. and Baloo, L. (2016) Effectiveness of water quality index for monitoring Malaysian river water quality. Polish Journal of Environmental Studies, 25 (1). pp. 231-239. ISSN 12301485

Nishanth, R. and John, K.V. and Whyte, A. (2016) Dynamic behaviour of FPSO in Kikeh field under different loading conditions. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2302-2307. ISSN 18196608

Namazi-Saleh, F. and John, K.V. and Bt. Mustaffa, Z. (2016) Numerical evaluation of galerkin finite volume solver for laminar/turbulent flow over flat plate. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2393-2399. ISSN 18196608

O

Ozdokur, K.V. and Moniruzzaman, M. and Yanik, J. and Ono, T. (2016) Synthesis and characterization of a polyoxometalate-based ionic liquid catalyst for delignification of wood biomass. Wood Science and Technology, 50 (6). pp. 1213-1226. ISSN 00437719

Owolabi, A.L. and Al-Kayiem, H.H. and Baheta, A.T. (2016) Nanoadditives induced enhancement of the thermal properties of paraffin-based nanocomposites for thermal energy storage. Solar Energy, 135. pp. 644-653. ISSN 0038092X

Ooi, B.L. and Gilbert, J.M. and Aziz, A.R.A. (2016) Analytical and finite-element study of optimal strain distribution in various beam shapes for energy harvesting applications. Acta Mechanica Sinica/Lixue Xuebao, 32 (4). pp. 670-683. ISSN 05677718

Osman, A. and Mutalib, M.I.A. and Shigidi, I. (2016) Heat recovery enhancement in HENs using a combinatorial approach of paths combination and process streams� temperature flexibility. South African Journal of Chemical Engineering, 21. pp. 37-48. ISSN 10269185

Osman, S.B.S. and Jusoh, H. and Abdul, H. (2016) Behavior of electrical resistivity in sandy clay loam soil with respect to its strength parameters. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5433-5438. ISSN 18196608

Osman, A. and Muhammad Yusof, M.K.A. and Rafi, M. (2016) Vehicle Testing and Development Involving a Simplified Split Cooling with Integrated Exhaust Heat Recovery and Reuse. SAE Technical Papers. ISSN 01487191

Othman, M. and Abdullah, S.L.S. and Ahmad, K.A. and Abu Bakar, M.N. and Mansor, A.R. (2016) The fusion of edge detection and mathematical morphology algorithm for shape boundary recognition. Journal of Information and Communication Technology, 15 (1). pp. 133-144. ISSN 1675414X

Othman, M. and Azahari, S.N.F. (2016) Deseasonalised forecasting model of rainfall distribution using fuzzy time series. Journal of Information and Communication Technology, 15 (2). pp. 153-169. ISSN 1675414X

Opatola, R.A. and Aziz, A.R.A. and Heikal, M.R. and Said, M.A.M. (2016) Towards mitigating engine-out emissions: A migration to fuel based and combustion based solutions. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13435-13440. ISSN 18196608

Osman, A.B. and Ovinis, M. and Osei, H. and Hashim, F.M. (2016) A review of optical flow models applied for fluid motion estimation. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12181-12186. ISSN 18196608

Osei, H. and Al-Kayiem, H.H. and Osman, A.B. (2016) Flow dynamics behaviour of a novel liquid-liquid hydrocyclone with varying upper cylindrical lengths and number of inlets. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12159-12164. ISSN 18196608

Othman, A.R. and Jadee, K.J. (2016) Specific bearing strength of bolted composite joint with different glass fiber reinforcement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12039-12044. ISSN 18196608

Ooi, B.L. and Gilbert, J.M. and Aziz, A.R.A. and Thein, C.K. (2016) Analytical modeling for switched damping electromagnetic energy harvester. Lecture Notes in Electrical Engineering, 379. pp. 1-12. ISSN 18761100

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2016) Simulation on the Performance of Dye Solar Cell Incorporated with TiO2 Passivation Layer. International Journal of Photoenergy, 2016. ISSN 1110662X

Olisa, E. and Sapari, N. and Malakahmad, A. and Ezechi, E.H. and Riahi, A. (2016) Enhancing landfill gas recovery- A review. Jurnal Teknologi, 78 (5-2). pp. 105-109. ISSN 01279696

Olisa, E. and Sapari, N. and Malakahmad, A. and Ezechi, E.H. and Riahi, A. and Salihi, I.U. and Orji, K.U. (2016) Evaluation of leachate characteristics from different leachate ponds in a semi-aerobic landfill. International Journal of Engineering Research in Africa, 22. pp. 68-82. ISSN 16633571

Omer, M.A. and Rao, T.V.V.L.N. (2016) Effect of additive volume fraction on a fluid film pressure and load of hydrodynamic journal bearing using ferromagnetic fluid. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4203-4207. ISSN 18196608

Olisa, E. and Sapari, N. and Malakahmad, A. and Ezechi, E.H. and Riahi, A. and Orji, K.U. and Alex-Ohunyon, O. and Salihi, I.U. (2016) Performance of sand channel as pre-treatment for anaerobic landfill bioreactor leachate and biogas generation. Journal of Environmental Science and Technology, 9 (1). pp. 100-110. ISSN 19947887

P

Pham, L.H.H.P. and Rusli, R. (2016) A review of experimental and modelling methods for accidental release behaviour of high-pressurised CO2 pipelines at atmospheric environment. Process Safety and Environmental Protection, 104. pp. 48-84. ISSN 09575820

Pasha, M. and Zaini, D. and Shariff, A.M. (2016) Explosion potential assessment of heat exchanger network at the preliminary design stage. Journal of Engineering Science and Technology, 11 (Specia). pp. 30-42. ISSN 18234690

Park, K.S. and Kim, Y.T. and Kim, D.K. and Yu, S.Y. and Choi, H.S. (2016) A new method for strake configuration design of Steel Catenary Risers. Ships and Offshore Structures, 11 (4). pp. 385-404. ISSN 17445302

Pereira, L.M.C. and Martins, V. and Kurnia, K.A. and Oliveira, M.B. and Dias, A.M.A. and Llovell, F. and Vega, L.F. and Carvalho, P.J. and Coutinho, J.A.P. (2016) High pressure solubility of CH4, N2O and N2 in 1-butyl-3-methylimidazolium dicyanamide: Solubilities, selectivities and soft-SAFT modeling. Journal of Supercritical Fluids, 110. pp. 56-64. ISSN 08968446

Partoon, B. and Sabil, K.M. and Roslan, H. and Lal, B. and Keong, L.K. (2016) Impact of acetone on phase boundary of methane and carbon dioxide mixed hydrates. Fluid Phase Equilibria, 412. pp. 51-56. ISSN 03783812

Prajapati, S. and Kukarina, E. and Mishra, S. (2016) Crustal seismic structure beneath the Deccan Traps area (Gujarat, India), from local travel-time tomography. Tectonophysics, 672-67. pp. 139-149. ISSN 00401951

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2016) Experimental measurement of strain and stress state at the contacting helical gear pairs. Measurement: Journal of the International Measurement Confederation, 82. pp. 313-322. ISSN 02632241

Pau, J.S. and Pao, W. and Yong, S.P. (2016) CO2 flow in saline aquifer with salt precipitation. International Journal of Numerical Methods for Heat and Fluid Flow, 26 (1). pp. 122-145. ISSN 09615539

Prasanth Kumar, B. and Rao, T.V.V.L.N. and Baharom, M. (2016) Microstructure based finite element analysis for deformation behavior of magnesium based composites. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12967-12972. ISSN 18196608

Pal, A. and El-Sharkawy, I.I. and Saha, B.B. and Habib, K. and Miyazaki, T. and Koyama, S. (2016) Thermodynamic analysis of adsorption cooling cycle using consolidated composite adsorbents - ethanol pairs. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12234-12238. ISSN 18196608

Parman, S. and Zainuddin, E. (2016) Design and analysis of hydraulic in a heavy commercial vehicle by recovering energy during braking. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11999-12004. ISSN 18196608

Pao, W. and Sam, B. and Nasif, M.S. (2016) Simulation of two phase oil-gas flow in pipeline. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4208-4213. ISSN 18196608

Puspitasari, P. and Yahya, N. and Andoko and Ekaputri, J.J. and Risdanareni, P. (2016) Properties of Y3Fe5O12(YIG) as nanocatalyst for ammonia formation produced from magnetic induction method (MIM). Materials Science Forum, 857. pp. 146-150. ISSN 02555476

Prajapati, S. and Ghosh, D. (2016) Resolving high frequency anomalies of gas cloud using full waveform inversion. Annals of Geophysics, 59 (1). ISSN 15935213

Q

Quek, L.X. and Ghant, A.A. and Saidin, M. and Harith, Z.Z.T. (2016) Durbachite-like melagranite in taiping pluton of bintang batholith, Peninsular Malaysia. Bulletin of the Geological Society of Malaysia, 62. pp. 1-6. ISSN 01266187

Qazi, W.H. and Osman, S.B.S. and Memon, M.B. (2016) Improvement of correlation using artificial neural networks technique for the prediction of resistivity against soil strength properties. Indian Journal of Science and Technology, 9 (37). ISSN 09746846

Qadrouh, A.N. and Carcione, J.M. and Salim, A.M.A. and Tuan Harith, Z.Z. (2016) Seismic spectrograms of an anelastic layer with different source-receivers configurations. Arabian Journal of Geosciences, 9 (5). ISSN 18667511

Qayyum, A. and Shoaib, M. and Faye, I. (2016) A companion of ostrowski type integral inequality using a 5-step kernel with some applications. Filomat, 30 (13). pp. 3601-3614. ISSN 03545180

Qayyum, J.A. and Altaf, K. and Mahmood, A. and Shah, M. and Rani, A.M.A. (2016) Grain refinement of LM25 Aluminum alloy casting using sloping plate process. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13049-13052. ISSN 18196608

Qayyum, A. and Faye, I. and Shoaib, M. (2016) Improvement of Ostrowski integral type inequalities with application. Filomat, 30 (6). pp. 1441-1456. ISSN 03545180

Qazi, W.H. and Osman, S.B.A.B.S. and Memon, M.B. (2016) Prediction of soil engineering properties using electrical resistivity values at controlled moisture content- A conceptual paper. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3684-3689. ISSN 18196608

Qayyum, A. and Kashif, A.R. and Shoaib, M. and Faye, I. (2016) Derivation and applications of inequalities of Ostrowski type for n-times differentiable mappings for cumulative distribution function and some quadrature rules. Journal of Nonlinear Science and Applications, 9 (4). pp. 1844-1857. ISSN 20081898

Qayyum, A. and Shoaib, M. and Faye, I. (2016) Companion of Ostrowski-type inequality based on 5-step quadratic kernel and applications. Journal of Nonlinear Science and Applications, 9 (2). pp. 537-552. ISSN 20081898

R

Rais, H.M. and Mehmood, T. (2016) Feature selection in intrusion detection, state of the art: A review. Journal of Theoretical and Applied Information Technology, 94 (1). pp. 30-43. ISSN 19928645

Renganathan, S. (2016) Literacy and development for the Orang Asli in Malaysia: What matters? Prospects, 46 (3-4). pp. 479-490. ISSN 00331538

Rehman, S. and Ali, S.S. and Khan, S.A. (2016) Wind Farm Layout Design Using Cuckoo Search Algorithms. Applied Artificial Intelligence, 30 (10). pp. 899-922. ISSN 08839514

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2016) Reliability driven constrained job scheduling on volunteer grid resources. Advanced Science Letters, 22 (10). pp. 2690-2694. ISSN 19366612

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2016) Application analysis: Theory of constraints for job scheduling on volunteer grid resources. Advanced Science Letters, 22 (10). pp. 2715-2718. ISSN 19366612

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2016) Analysis of Micropolar and Power Law Fluid�Lubricated Slider and Journal Bearing with Partial Slip�Partial Slip Texture Configuration. Tribology Transactions, 59 (5). pp. 896-910. ISSN 10402004

Raja, P.B. and Ismail, M. and Ghoreishiamiri, S. and Mirza, J. and Ismail, M.C. and Kakooei, S. and Rahim, A.A. (2016) Reviews on Corrosion Inhibitors: A Short View. Chemical Engineering Communications, 203 (9). pp. 1145-1156. ISSN 00986445

Rasin, N. and Kueh, A.B.H. and Mahat, M.N.H. and Yassin, A.Y.M. (2016) Stability of triaxially woven fabric composites employing geometrically nonlinear plate model with volume segmentation ABD constitution. Journal of Composite Materials, 50 (19). pp. 2719-2735. ISSN 00219983

Riahi, A. and Wan Yusof, K. and Mahinder Singh, B.S. and Isa, M.H. and Olisa, E. and Zahari, N.A.M. (2016) Sustainable potable water production using a solar still with photovoltaic modules-AC heater. Desalination and Water Treatment, 57 (32). pp. 14929-14944. ISSN 19443994

Ramli, R. and Bakar, A.A. and Aziz, N. (2016) Review of literatures on trust factors affecting customer's purchase intention on SOHO seller: S-commerce context. Information (Japan), 19 (7B). pp. 2791-2796. ISSN 13434500

Ranitha, M. and Nurlidia, M. and Muhammad Rashid, S. and Yoshimitsu, U. (2016) Bioremoval of lead in industrial wastewater by microalgae. Journal of Engineering Science and Technology, 11 (Specia). pp. 43-49. ISSN 18234690

Raja Shahrom, M.S. and Wilfred, C.D. and Taha, A.K.Z. (2016) CO2 capture by task specific ionic liquids (TSILs) and polymerized ionic liquids (PILs and AAPILs). Journal of Molecular Liquids, 219. pp. 306-312. ISSN 01677322

Ramli, N.M. and Hussain, M.A. and Jan, B.M. (2016) Multivariable control of a debutanizer column using equation based artificial neural network model inverse control strategies. Neurocomputing, 194. pp. 135-150. ISSN 09252312

Rashid, T. and Kait, C.F. and Regupathi, I. and Murugesan, T. (2016) Dissolution of kraft lignin using Protic Ionic Liquids and characterization. Industrial Crops and Products, 84. pp. 284-293. ISSN 09266690

Renganathan, S. (2016) Educating the Orang Asli children: Exploring indigenous children's practices and experiences in schools. Journal of Educational Research, 109 (3). pp. 275-285. ISSN 00220671

Rahman, I. and Vasant, P.M. and Singh, B.S.M. and Abdullah-Al-Wadud, M. and Adnan, N. (2016) Review of recent trends in optimization techniques for plug-in hybrid, and electric vehicle charging infrastructures. Renewable and Sustainable Energy Reviews, 58. pp. 1039-1047. ISSN 13640321

Rashidi, N.A. and Yusup, S. (2016) Overview on the Potential of Coal-Based Bottom Ash as Low-Cost Adsorbents. ACS Sustainable Chemistry and Engineering, 4 (4). pp. 1870-1884. ISSN 21680485

Rosyadah Ahmad, N.N. and Mukhtar, H. and Mohshim, D.F. and Nasir, R. and Man, Z. (2016) Surface modification in inorganic filler of mixed matrix membrane for enhancing the gas separation performance. Reviews in Chemical Engineering, 32 (2). pp. 181-200. ISSN 01678299

Rahman, A.U. and Alharby, A. and Hasbullah, H. and Almuzaini, K. (2016) Corona based deployment strategies in wireless sensor network: A survey. Journal of Network and Computer Applications, 64. pp. 176-193. ISSN 10848045

Rahman, I. and Vasant, P.M. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2016) Novel metaheuristic optimization strategies for plug-in hybrid electric vehicles: A holistic review. Intelligent Decision Technologies, 10 (2). pp. 149-163. ISSN 18724981

Rahman, I. and Vasant, P.M. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2016) On the performance of accelerated particle swarm optimization for charging plug-in hybrid electric vehicles. Alexandria Engineering Journal, 55 (1). pp. 419-426. ISSN 11100168

Rashidi, N.A. and Yusup, S. (2016) An overview of activated carbons utilization for the post-combustion carbon dioxide capture. Journal of CO2 Utilization, 13. pp. 1-16. ISSN 22129820

Rosli, M.A. and Yahaya, N.Z. and Baharudin, Z. (2016) Multi-input DC-AC inverter for hybrid renewable energy power system. International Journal of Electrical and Computer Engineering, 6 (1). pp. 40-52. ISSN 20888708

Rafique, M.Z. and Rahman, M.N.A. and Saibani, N. and Arsad, N. and Mughal, I.A. and Hanif, S. and Zafar, M. (2016) Quality check for customer benefit in bus transport system through statistical control charts and gauge R & R. International Journal of Applied Engineering Research, 11 (1). pp. 101-104. ISSN 09734562

Raza, M.R. and Ahmad, F. and Muhamad, N. and Sulong, A.B. and Omar, M.A. and Akhtar, M.N. and Aslam, M. (2016) Effects of solid loading and cooling rate on the mechanical properties and corrosion behavior of powder injection molded 316 L stainless steel. Powder Technology, 289. pp. 135-142. ISSN 00325910

Rahmanian, N. and Halmi, M.H. and Kong, C.C. and Patel, R. and Yusup, S. and Mujtaba, I.M. (2016) An experimental investigation on seeded granulation of detergent powders. Chemical Engineering Transactions, 52. pp. 1297-1302. ISSN 22839216

Rao, T.V.V.L.N. and Mokhtar, A.A. and Muhammad, M. and Hussain, P. (2016) Optimally tuned active damped dynamic vibration absorber. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13380-13383. ISSN 18196608

Reza Shamshirgaran, S. and Nouzari, M.M. and Khalaji Assadi, M. and Najafzadeh, K. and Reza Bayati, G. (2016) The indicators and criteria of efficiency, water consumption and emission of thermal power plants. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13338-13343. ISSN 18196608

Rahman, N.A.A. and Ismil, M.C. and Man, Z. (2016) Modification of epoxy with Polyaniline and its effects on cathodic disbondment factors. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12973-12978. ISSN 18196608

Razali, R. and Jaafar, J. (2016) Classification algorithm for customer complaint using fuzzy approach. Jurnal Teknologi, 78 (12-2). pp. 65-76. ISSN 01279696

Ridha, S. and Akmalludin, M. and Salehudin, S.S. (2016) Microstructure investigations on nano-geopolymer cement cured under HPHT conditions. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 144-149. ISSN 18196608

Raza, T. and Muhammad, M.B. and Majid, M.A.A. (2016) A comprehensive framework and key performance indicators for maintenance performance measurement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12146-12152. ISSN 18196608

Rahman, M.B.A. and Ishak, Z.I. and Jumbri, K. and Aziz, A.A. and Basri, M. and Salleh, A.B. (2016) Effect of ionic liquids on oil palm biomass fiber dissolution. BioResources, 11 (3). pp. 7172-7190. ISSN 19302126

Rahmanian, N. and Bt Jusoh, L.S. and Homayoonfard, M. and Nasrifar, K. and Moshfeghian, M. (2016) Simulation and optimization of a condensate stabilisation process. Journal of Natural Gas Science and Engineering, 32. pp. 453-464. ISSN 18755100

Razali, R. and Irfan, S.A. and Xiang, T.Y. (2016) Fuzzy logic model of nitrate release from polymercoated fertilizers. Ecology, Environment and Conservation, 22 (1). pp. 345-349. ISSN 0971765X

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2016) Load capacity coefficient evaluation of three-layered journal bearing with slip. Jurnal Teknologi, 78 (6-10). pp. 39-43. ISSN 01279696

Riaz, N. and Chong, F.K. and Man, Z.B. and Sarwar, R. and Farooq, U. and Khan, A. and Khan, M.S. (2016) Preparation, characterization and application of Cu-Ni/TiO2 in Orange II photodegradation under visible light: Effect of different reaction parameters and optimization. RSC Advances, 6 (60). pp. 55650-55665. ISSN 20462069

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2016) Performance management using autonomous control-based distributed coordination approach in a volunteer grid computing environment. Advances in Intelligent Systems and Computing, 465. pp. 457-469. ISSN 21945357

Ratnam, K.A. and Dominic, P.D.D. (2016) Factors associating the IT capability in healthcare services and its perceived transformation impact. International Journal of Business Information Systems, 22 (1). pp. 82-99. ISSN 17460972

Ramli, A. and Mohamad, M.F. and Yusup, S. and Hin, T.Y.Y. (2016) Hydrogen production from gasification of palm kernel shell in the presence of Fe/CeO2 catalysts Penghasilan hidrogen daripada pengegasan isirung kelapa sawit dengan kehadiran mangkin Fe/CeO2. Malaysian Journal of Analytical Sciences, 20 (2). pp. 303-308. ISSN 13942506

Rahman, N.A.A. and Ismail, M.C. and Man, Z. (2016) The effect of hydrogen diffusivities on PANI-modified epoxy coating under potentiostatic charging. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4214-4220. ISSN 18196608

Rao, P.V. and Nallappan, D. and Madhavi, K. and Rahman, S. and Jun Wei, L. and Gan, S.H. (2016) Phytochemicals and Biogenic Metallic Nanoparticles as Anticancer Agents. Oxidative Medicine and Cellular Longevity, 2016. ISSN 19420900

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Nagarajan, T. and Hashim, F.M. (2016) Stability analysis of double porous and surface porous layer journal bearing. Tribology - Materials, Surfaces and Interfaces, 10 (1). pp. 19-25. ISSN 17515831

Rao, G.R.N. and Ahmed, S. and Sailaja, R.R.N. and Sharma, K.V. (2016) A decision-making approach for energy efficiency improvement in municipal water pumps during water scarcity scenario. Energy Efficiency, 9 (1). pp. 141-151. ISSN 1570646X

Reza Shamshirgaran, S. and Ameri, M. and Khalaji, M. and Ahmadi, M.H. (2016) Design and optimization of a compressed air energy storage (CAES) power plant by implementing genetic algorithm. Mechanics and Industry, 17 (1). ISSN 22577777

S

Shahbaz, M. and Yusup, S. and Inayat, A. and Patrick, D.O. and Pratama, A. (2016) Application of response surface methodology to investigate the effect of different variables on conversion of palm kernel shell in steam gasification using coal bottom ash. Applied Energy, 184. pp. 1306-1315. ISSN 03062619

Sohaili, J. and Shi, H.S. and Lavania-Baloo and Zardari, N.H. and Ahmad, N. and Muniyandi, S.K. (2016) Removal of scale deposition on pipe walls by using magnetic field treatment and the effects of magnetic strength. Journal of Cleaner Production, 139. pp. 1393-1399. ISSN 09596526

Saieed, A. and Sam, B. and Pao, W. and Hashim, F.M. (2016) Numerical investigation of side arm gas volume fraction in two phase T-junction. Journal of Mechanical Engineering and Sciences, 10 (3). pp. 2311-2323. ISSN 22894659

Salam, M.A. and Abdullah, B. and Ramli, A. and Mujtaba, I.M. (2016) Structural feature based computational approach of toxicity prediction of ionic liquids: Cationic and anionic effects on ionic liquids toxicity. Journal of Molecular Liquids, 224. pp. 393-400. ISSN 01677322

Shah, S.H. and Uemura, Y. and Yusup, S. and Kusakabe, K. and Mahmood, Q. and Ali, A. (2016) Nano-Structured Porous Yttria-Stabilized Zirconia Membrane for High-Temperature CO 2 Capture from H 2/ CO 2 Mixture. Arabian Journal for Science and Engineering, 41 (12). pp. 4763-4774. ISSN 2193567X

Suleman, H. and Maulud, A.S. and Man, Z. (2016) A hybrid equation of state and Kent-Eisenberg model for accurate prediction of carbon dioxide separation by aqueous alkanolamines. Separation Science and Technology (Philadelphia), 51 (17). pp. 2744-2755. ISSN 01496395

Sani, N.A.A. and Lau, W.J. and Nordin, N.A.H.M. and Ismail, A.F. (2016) Influence of organic solvents and operating conditions on the performance of polyphenylsulfone (PPSU)/copper-1,3,5-benzenetricarboxylate (Cu-BTC) solvent resistant nanofiltration (SRNF) membranes. Chemical Engineering Research and Design, 115. pp. 66-76. ISSN 02638762

Shehzad, A. and Bashir, M.J.K. and Sethupathi, S. and Lim, J.-W. and Younas, M. (2016) Bioelectrochemical system for landfill leachate treatment � challenges, opportunities, and recommendations. Geosystem Engineering, 19 (6). pp. 337-345. ISSN 12269328

Shafiabady, N. and Lee, L.H. and Rajkumar, R. and Kallimani, V.P. and Akram, N.A. and Isa, D. (2016) Using unsupervised clustering approach to train the Support Vector Machine for text classification. Neurocomputing, 211. pp. 4-10. ISSN 09252312

Saeed, M.O. and Azizli, K.A.M. and Isa, M.H. and Ezechi, E.H. (2016) Treatment of POME using Fenton oxidation process: removal efficiency, optimization, and acidity condition. Desalination and Water Treatment, 57 (50). pp. 23750-23759. ISSN 19443994

Shamim, A. and Ghazali, Z. (2016) Influence of extrinsic value on customer participation in value co-creation behaviour: Empirical investigation using SEM approach. Pertanika Journal of Social Sciences and Humanities, 24 (Octobe). pp. 15-26. ISSN 01287702

Suman, S. and Hussi, F.A. and Nicolas, W. and Malik, A.S. (2016) Ulcer detection and classification of wireless capsule endoscopy images using RGB masking. Advanced Science Letters, 22 (10). pp. 2764-2768. ISSN 19366612

Shehzad, A. and Bashir, M.J.K. and Sethupathi, S. and Lim, J.-W. (2016) Simultaneous removal of organic and inorganic pollutants from landfill leachate using sea mango derived activated carbon via microwave induced activation. International Journal of Chemical Reactor Engineering, 14 (5). pp. 991-1001. ISSN 15426580

Shahbazi, A. and Ghosh, D. and Soleimani, M. and Gerami, A. (2016) Seismic imaging of complex structures with the CO-CDS stack method. Studia Geophysica et Geodaetica, 60 (4). pp. 662-678. ISSN 00393169

Shafiq, N. and Ayub, T. and Khan, S.U. (2016) Investigating the performance of PVA and basalt fibre reinforced beams subjected to flexural action. Composite Structures, 153. pp. 30-41. ISSN 02638223

Shah, S.N. and Ismail, M. and Mutalib, M.I.A. and Pilus, R.B.M. and Chellappan, L.K. (2016) Extraction and recovery of toxic acidic components from highly acidic oil using ionic liquids. Fuel, 181. pp. 579-586. ISSN 00162361

Shetty, N. and Deshannavar, U.B. and Marappagounder, R. and Pendyala, R. (2016) Improved threshold fouling models for crude oils. Energy, 111. pp. 453-467. ISSN 03605442

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2016) Effect of Ethylene Flow Rate and CVD Process Time on Diameter Distribution of MWCNTs. Materials and Manufacturing Processes, 31 (12). pp. 1537-1542. ISSN 10426914

Shafa, M. and Wang, Z. and Naz, M.Y. and Akbar, S. and Farooq, M.U. and Ghaffar, A. (2016) Morphology and photoresponse of crystalline antimony film grown on mica by physical vapor deposition. Materials Science- Poland, 34 (3). pp. 591-596. ISSN 20831331

Shabib-Asl, A. and Ayoub, M.A. and Elraies, K.A. and Hosseini, S. and Hematpour, H. (2016) Investigation into the effects of crude oil on foam stability by using different low salinity water. Indian Journal of Science and Technology, 9 (35). ISSN 09746846

Sagir, M. and Tan, I.M. and Mushtaq, M. and Pervaiz, M. and Tahir, M.S. and Shahzad, K. (2016) CO2 mobility control using CO2 philic surfactant for enhanced oil recovery. Journal of Petroleum Exploration and Production Technology, 6 (3). pp. 401-407. ISSN 21900558

Suleman, H. and Maulud, A.S. and Man, Z. (2016) Experimental Measurement and Thermodynamic Modeling of the Solubility of Carbon Dioxide in Aqueous Alkanolamine Solutions in the High Gas Loading Region. International Journal of Thermophysics, 37 (9). ISSN 0195928X

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2016) Plasticization and Swelling in Polymeric Membranes in CO2 Removal from Natural Gas. Chemical Engineering and Technology, 39 (9). pp. 1604-1616. ISSN 09307516

Sivapragasam, M. and Moniruzzaman, M. and Goto, M. (2016) Recent advances in exploiting ionic liquids for biomolecules: Solubility, stability and applications. Biotechnology Journal, 11 (8). pp. 1000-1013. ISSN 18606768

Sivapalan, S. and Clifford, M.J. and Speight, S. (2016) Engineering education for sustainable development: using online learning to support the new paradigms. Australasian Journal of Engineering Education, 21 (2). pp. 61-73. ISSN 13245821

Suki, N.S.A. and Yee, O.H. and Kamaruddin, S. and Bakar, E.A. (2016) Establishing an optimal quality planning decision through discrete event simulation: Analysis case study. Jurnal Teknologi, 78 (7). pp. 149-160. ISSN 01279696

Shah, S.N. and Mutalib, M.I.A. and Ismail, M.F. and Suleman, H. and Lethesh, K.C. and Pilus, R.B.M. (2016) Thermodynamic modelling of liquid-liquid extraction of naphthenic acid from dodecane using imidazolium based phenolate ionic liquids. Journal of Molecular Liquids, 219. pp. 513-525. ISSN 01677322

Shoaib, M. and Hisham, N. and Basheer, N. and Tariq, M. (2016) Frequency and displacement analysis of electrostatic cantilever-based MEMS sensor. Analog Integrated Circuits and Signal Processing, 88 (1). pp. 1-11. ISSN 09251030

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2016) Parametric study on vapor-solid-solid growth mechanism of multiwalled carbon nanotubes. Materials Chemistry and Physics, 176. pp. 32-43. ISSN 02540584

Saiful Bahari, N.i. and Ahmad, A. and Aboobaider, B.M. and Razali, M.F. and Sakidin, H. and Mohamad Isa, M.S. (2016) Restoration of hazy data based on spectral and statistical methods. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 6807-6813. ISSN 18196608

Sarwar, M. and Abd Majid, M.A.B. and Ismail, M.C. (2016) Proposed guidelines for welding procedures to ensure quality welding of creep strength enhanced ferritic (CSEF) materials. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7765-7773. ISSN 18196608

Saman, N. and Johari, K. and Song, S.-T. and Kong, H. and Cheu, S.-C. and Mat, H. (2016) High removal efficiency of Hg(II) and MeHg(II) from aqueous solution by coconut pith - Equilibrium, kinetic and mechanism analyses. Journal of Environmental Chemical Engineering, 4 (2). pp. 2487-2499. ISSN 22133437

Sulaiman, S.A. and Miin, C.S. and Naz, M.Y. and Raghavan, V.R. (2016) Particle Image Velocimetry of a Swirling Fluidized Bed at Different Blade Angles. Chemical Engineering and Technology, 39 (6). pp. 1151-1160. ISSN 09307516

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2016) Bio-inspired NoC fault tolerant techniques using guaranteed throughput and best effort services. Integration, the VLSI Journal, 54. pp. 65-96. ISSN 01679260

Song, S.-T. and Hau, Y.-F. and Saman, N. and Johari, K. and Cheu, S.-C. and Kong, H. and Mat, H. (2016) Process analysis of mercury adsorption onto chemically modified rice straw in a fixed-bed adsorber. Journal of Environmental Chemical Engineering, 4 (2). pp. 1685-1697. ISSN 22133437

Shah, M.M. and Ahmed, W. and Ahsan, N. and Lisa, M. (2016) Fault-controlled, bedding-parallel dolomite in the middle Jurassic Samana Suk Formation in Margalla Hill Ranges, Khanpur area (North Pakistan): petrography, geochemistry, and petrophysical characteristics. Arabian Journal of Geosciences, 9 (5). ISSN 18667511

Shariff, A.M. and Wahab, N.A. and Rusli, R. (2016) Assessing the hazards from a BLEVE and minimizing its impacts using the inherent safety concept. Journal of Loss Prevention in the Process Industries, 41. pp. 303-314. ISSN 09504230

Sekhar, Y.R. and Sharma, K.V. and Kamal, S. (2016) Nanofluid heat transfer under mixed convection flow in a tube for solar thermal energy applications. Environmental Science and Pollution Research, 23 (10). pp. 9411-9417. ISSN 09441344

Sellaoui, L. and Guedidi, H. and Masson, S. and Reinert, L. and Levêque, J.-M. and Knani, S. and Lamine, A.B. and Khalfaoui, M. and Duclaux, L. (2016) Steric and energetic interpretations of the equilibrium adsorption of two new pyridinium ionic liquids and ibuprofen on a microporous activated carbon cloth: Statistical and COSMO-RS models. Fluid Phase Equilibria, 414. pp. 156-163. ISSN 03783812

Sultana, S. and Ahmad, M. and Zafar, M. and Ullah, K. and Ashraf, M.A. and Ayoub, M. and Tareen, N.M. (2016) Biodiesel synthesis and characterization using welted thistle plant (Carduus acanthoides) as source of new non-edible seed oil. International Journal of Green Energy, 13 (5). pp. 462-469. ISSN 15435075

Savita, K.S. and Dominic, P.D.D. and Ramayah, T. (2016) The drivers, practices and outcomes of green supply chain management: Insights from ISO14001 manufacturing firms in Malaysia. International Journal of Information Systems and Supply Chain Management, 9 (2). pp. 35-60. ISSN 19355726

Saand, A.S. and Jeoti, V. and Saad, M.N.M. (2016) Efficient Beamforming by SLNR Maximization for Dual-Hop Relay Assisted MIMO Network. Wireless Personal Communications, 87 (3). pp. 645-661. ISSN 09296212

Suleman, H. and Maulud, A.S. and Man, Z. (2016) A Fugacity Corrected Thermodynamic Framework for Aqueous Alkanolamine Solutions. Journal of Solution Chemistry, 45 (4). pp. 546-559. ISSN 00959782

Sedighi, M. and Ghasemi, M. and Sadeqzadeh, M. and Hadi, M. (2016) Thorough study of the effect of metal-incorporated SAPO-34 molecular sieves on catalytic performances in MTO process. Powder Technology, 291. pp. 131-139. ISSN 00325910

Sharma, K.V. and Azmi, W.H. and Kamal, S. and Sarma, P.K. and Vijayalakshmi, B. (2016) Theoretical analysis of heat transfer and friction factor for turbulent flow of nanofluids through pipes. Canadian Journal of Chemical Engineering, 94 (3). pp. 565-575. ISSN 00084034

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Saheed, M.S.M. and Irshad, M.I. (2016) Effect of CVD Process Temperature on Activation Energy and Structural Growth of MWCNTs. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 (3). pp. 1413-1424. ISSN 10735623

Shamim, A. and Ghazali, Z. and Albinsson, P.A. (2016) An integrated model of corporate brand experience and customer value co-creation behaviour. International Journal of Retail and Distribution Management, 44 (2). pp. 139-158. ISSN 09590552

Singh, V. and Elamvazuthi, I. and Jeoti, V. and George, J. and Swain, A. and Kumar, D. (2016) Impacting clinical evaluation of anterior talofibular ligament injuries through analysis of ultrasound images. BioMedical Engineering Online, 15 (1). ISSN 1475925X

Saman, N. and Johari, K. and Song, S.-T. and Mat, H. (2016) Surface modifications of agrowaste biomass for Hg(II) and MeHg(II) removal from aqueous solution, oilfield produced water and natural gas condensate. Environmental Earth Sciences, 75 (4). pp. 1-12. ISSN 18666280

Sabet, M. and Soleimani, H. and Hosseini, S. (2016) Properties and characterization of ethylene-vinyl acetate filled with carbon nanotube. Polymer Bulletin, 73 (2). pp. 419-434. ISSN 01700839

Siddiqui, M.I. and Munir, S. and Heikal, M.R. and de Sercey, G. and Aziz, A.R.A. and Dass, S.C. (2016) Simultaneous velocity measurements and the coupling effect of the liquid and gas phases in slug flow using PIV�LIF technique. Journal of Visualization, 19 (1). pp. 103-114. ISSN 13438875

Shah, S.M.U. and Ahmad, A. and Othman, M.F. and Abdullah, M.A. (2016) Effects of palm oil mill effluent media on cell growth and lipid content of Nannochloropsis oculata and Tetraselmis suecica. International Journal of Green Energy, 13 (2). pp. 200-207. ISSN 15435075

Sulaiman, S.A. and Bamufleh, H.S. and Tamili, S.N.A. and Inayat, M. and Naz, M.Y. (2016) Characterization of date palm fronds as a fuel for energy production. Bulletin of the Chemical Society of Ethiopia, 30 (3). pp. 465-472. ISSN 10113924

Sivapalan, S. (2016) Engineering education for sustainable development in malaysia: Student stakeholders perspectives on the integration of holistic sustainability competences within undergraduate engineering programmes. World Sustainability Series. pp. 263-285. ISSN 21997373

Shahbaz, M. and Yusup, S. and Inayat, A. and Patrick, D.O. and Partama, A. (2016) System analysis of poly-generation of SNG, power and district heating from biomass gasification system. Chemical Engineering Transactions, 52. pp. 781-786. ISSN 22839216

Saieed, A. and Sam, B. and Pao, W. and Hashim, F.M. and Norpiah, R.B.M. (2016) A review of t-junction geometrical effect on two-phase separation. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14233-14238. ISSN 18196608

Sivanathan, P. and Ismail, M.C. and Eng, K.K. (2016) Chloride stress corrosion cracking (cscc) of austenitic stainless steel under thermal insulation: Case study analysis. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14239-14243. ISSN 18196608

Sulaiman, S.A. and Inayat, M. and Basri, H. and Guangul, F.M. and Atnaw, S.M. (2016) Effect of blending ratio on temperature profile and syngas composition of woody biomass co-gasification. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2176-2186. ISSN 22894659

Shuaib, K. and Hussin, H. and Abd Majid, M.A. (2016) Fuzzy multi-criteria decision making model for risk assessment. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13072-13077. ISSN 18196608

Srinivasa Rao, P. and Bawazir, A.F.O. and Awang, M. and Rani, A.M.A. and Jebaraj, S. (2016) Effect of tool geometrical parameters on friction stir welding joint properties of aluminum alloy AA6061. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13053-13058. ISSN 18196608

Saeidi, T. and Ismail, I.B. and Ahadi, M. and Alhawari, A.R.H. (2016) Photonic band gap aperture coupled fractal shape tri-band active antenna. Progress In Electromagnetics Research C, 69. pp. 125-138. ISSN 19378718

Said, M.A. and Bong, D. and Mohd, M.S. and Dol, S.S. (2016) Prototype development of thermoelectric generator system for exhaust heat recovery of an automobile. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12217-12231. ISSN 18196608

Sudiskumar, D. and Ismail, F.B. and Nasif, M.S. (2016) Design and implementation of cooking oil and water filtration system for domestic application. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12222-12227. ISSN 18196608

Sabir, O. and Tuan Ya, T.M.Y.S. (2016) Cell by cell artificial neural network model for predicting laminar, incompressible, viscous flow. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12084-12089. ISSN 18196608

Sam, B. and Pao, W. and Nasif, M.S. and Norpiah, R.B.M. (2016) Simulation of two phase oil-gas flow in T-junction. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12011-12016. ISSN 18196608

Shobowale, K.O. and Hashim, F.M. and Hussin, H. (2016) Ontology based decision support knowledge acquisition module. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11988-11993. ISSN 18196608

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2016) NoC architecture: A closer look. Asian Journal of Information Technology, 15 (14). pp. 2531-2541. ISSN 16823915

Shiang, W.C. and Izzatdin, A.A. and Haron, N.S. and Jaafar, J. and Ismail, N.N. and Mehat, M. (2016) The high performance linpack (HPL) benchmark evaluation on UTP high performance cluster computing. Jurnal Teknologi, 78 (9-3). pp. 21-30. ISSN 01279696

Singh, V. and Elamvazuthi, I. and Jeoti, V. and George, J. and Yahya, N. and Kumar, D. (2016) Ultrasound based three dimensional computer aided diagnosis (CAD) tool for the diagnosis of anterior talofibular ligament. Studies in Computational Intelligence, 651. pp. 213-235. ISSN 1860949X

Siyal, A.A. and Azizli, K.A. and Man, Z. and Ismail, L. and Khan, M.I. (2016) Geopolymerization kinetics of fly ash based geopolymers using JMAK model. Ceramics International, 42 (14). pp. 15575-15584. ISSN 02728842

Salehudin, S.S. and Ridha, S. (2016) Coconut residue as biopolymer drag reducer agent in water injection system. International Journal of Applied Engineering Research, 11 (13). pp. 8037-8040. ISSN 09734562

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Yasar, M. (2016) Effect of ferrocene catalyst and hydrogen feed on microstructures of vertically aligned MWCNTs. Key Engineering Materials, 701. pp. 8-12. ISSN 10139826

Singh, V. and Elamvazuthi, I. and Jeoti, V. and George, J. and Kumar, D. (2016) Computer aided diagnosis (CAD) tool for the analysis of calcaneofibular ligament using ultrasonographic images. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8972-8977. ISSN 18196608

Sholagberu, A.T. and Ul Mustafa, M.R. and Wan Yusof, K. and Ahmad, M.H. (2016) Evaluation of rainfall-runoff erosivity factor for cameron highlands, Pahang, Malaysia. Journal of Ecological Engineering, 17 (3). pp. 1-8. ISSN 2081139X

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. (2016) A new method for detection of unbalance voltage supply in three phase induction motor. Jurnal Teknologi, 78 (5-8). pp. 7-12. ISSN 01279696

Sabir, A.A. and Isha, A.S.N.B. (2016) Assessing the fatigue related psychological risk factors among oil and gas tankers drivers in Malaysia. International Review of Management and Marketing, 6 (4). pp. 138-142. ISSN 21464405

Salihi, I.U. and Kutty, S.R.M. and Isa, M.H. and Malakahmad, A. and Umar, U.A. (2016) Sorption of zinc using microwave incinerated sugarcane bagasse ash (MISCBA) and raw bagasse. Jurnal Teknologi, 78 (5-3). pp. 47-51. ISSN 01279696

Sharma, N. and Yasin, F.F. and Shahruddin, S. and Mohd Fadzil, M.A. and Rajantereh, Y. and Chandramalar, A.V.M. and Samsodin, N. (2016) Characterisation of malaysian waxy crude oils. Petroleum and Coal, 58 (1). pp. 95-101. ISSN 13377027

Sabet, M. and Hosseini, S.N. and Zamani, A. and Hosseini, Z. and Soleimani, H. (2016) Application of nanotechnology for enhanced oil recovery: A review. Defect and Diffusion Forum, 367. pp. 149-156. ISSN 10120386

Salleh, R. and Md Yusof, M.A. and Memon, M.A. (2016) Attributes of graduate architects: An industry perspective. Social Sciences (Pakistan), 11 (5). pp. 551-556. ISSN 18185800

Siang, T.L. and Aziz, Z.A. and Ching, D.L.C. (2016) SV-wave with external force in saturated medium. Jurnal Teknologi, 78 (3-2). pp. 101-106. ISSN 01279696

Sohail, A. and Dominic, P.D.D. and Shahzad, K. (2016) Business process analysis: A process warehouse-based resource preference evaluation method. International Journal of Business Information Systems, 21 (2). pp. 137-161. ISSN 17460972

Soleimani, H. and Yahya, N. and Baig, M.K. and Khodapanah, L. and Sabet, M. and Bhat, A.H. and �chsner, A. and Awang, M. (2016) Catalytic effect of zinc oxide nanoparticles on oil-water interfacial tension. Digest Journal of Nanomaterials and Biostructures, 11 (1). pp. 263-269. ISSN 18423582

Shoaib, M. and Hamid, N.H. and Malik, A.F. and Zain Ali, N.B. and Tariq Jan, M. (2016) A Review on Key Issues and Challenges in Devices Level MEMS Testing. Journal of Sensors, 2016. ISSN 1687725X

Setvati, M.R. and Mustaffa, Z. and Isnadi, B. and Shafiq, N. and Syed, Z.I. and Kim, D.K. (2016) Meso-scale numerical study of composite patch repaired hole drilled steel plate. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1724-1728. ISSN 18196608

Selvarajah, K. and Phuc, N.H.H. and Abdullah, B. and Alenazey, F. and Vo, D.-V.N. (2016) Syngas production from methane dry reforming over Ni/Al2O3 catalyst. Research on Chemical Intermediates, 42 (1). pp. 269-288. ISSN 09226168

Soleimani, H. and Latiff, N.R.A. and Yahya, N. and Sabet, M. and Khodapanah, L. and Kozlowski, G. and Chuan, L.K. and Guan, B.H. (2016) Synthesis and characterization of yttrium iron Garnet (YIG) Nanoparticles activated by electromagnetic wave in enhanced oil recovery. Journal of Nano Research, 38. pp. 40-46. ISSN 16625250

Siddiqui, N.A. and Rahman, A.H.A. and Sum, C.W. and Mathew, M.J. and Menier, D. (2016) Onshore Sandstone Facies Characteristics and Reservoir Quality of Nyalau Formation, Sarawak, East Malaysia: An Analogue to Subsurface Reservoir Quality Evaluation. Arabian Journal for Science and Engineering, 41 (1). pp. 267-280. ISSN 2193567X

Shaikh, P.H. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. and Ibrahim, T. (2016) Intelligent multi-objective control and management for smart energy efficient buildings. International Journal of Electrical Power and Energy Systems, 74. pp. 403-409. ISSN 01420615

T

Tay, W.H. and Lau, K.K. and Shariff, A.M. (2016) High frequency ultrasonic-assisted CO2 absorption in a high pressure water batch system. Ultrasonics Sonochemistry, 33. pp. 190-196. ISSN 13504177

Tan, K.-C. and Seng, C.-E. and Lim, P.-E. and Oo, C.-W. and Lim, J.-W. and Kew, S.-L. (2016) Alteration of moving bed sequencing batch reactor operational strategies for the enhancement of nitrogen removal from stabilized landfill leachate. Desalination and Water Treatment, 57 (34). pp. 15979-15988. ISSN 19443994

Tran, N.T.T. and Uemura, Y. and Chowdhury, S. and Ramli, A. (2016) Vapor-phase hydrodeoxygenation of guaiacol on Al-MCM-41 supported Ni and Co catalysts. Applied Catalysis A: General, 512. pp. 93-100. ISSN 0926860X

Tahan, M. and Sarwar, U. and Muhammad, M. and Abdul Karim, Z.A. (2016) Modeling and sensitivity analysis of a multi-nets anns model for real-time performance-based condition monitoring of an industrial gas turbine engine. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14269-14274. ISSN 18196608

Tamiru, A.L. and Fakhruldin, M.H. and Mohd Amin, A.M. and Ainul, A.M. (2016) Gas turbines health prognostics: A short review. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13214-13219. ISSN 18196608

Tamiru, A.L. and Fakhruldin, M.H. and Mohd. Amin, A.M. and Ainul, A.M. (2016) Orthonormal Basis Filters for gas turbine fault diagnostics system design: A review. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13399-13404. ISSN 18196608

Talib, N. and Abd Majid, M.A. (2016) Thermodynamic analysis on oil palm biomass Cogeneration Plant. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12959-12966. ISSN 18196608

Truong, K.H. and Vasant, P. and Singh, M.S.B. and Vo, D.N. (2016) Hybrid mean-variance mapping optimization for economic dispatch with multiple fuels considering valve-point effects. Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST, 168. pp. 203-216. ISSN 18678211

Taghizadeh, S.K. and Rahman, S.A. and Ahmad, N.H. and Ramayah, T. (2016) Psychological factors of innovativeness among nomadic micro-entrepreneurs for achieving business growth. Business: Theory and Practice, 17 (3). pp. 191-201. ISSN 16480627

Theo, W.L. and Lim, J.S. and Wan Alwi, S.R. and Mohammad Rozali, N.E. and Ho, W.S. and Abdul-Manan, Z. (2016) An MILP model for cost-optimal planning of an on-grid hybrid power system for an eco-industrial park. Energy, 116. pp. 1423-1441. ISSN 03605442

Trinh, T.H. and Kushaari, K. (2016) Inverse modelling for prediction of coating material diffusivity and lag time of controlled-release coated urea granule. Defect and Diffusion Forum, 369. pp. 30-35. ISSN 10120386

Tay, W.H. and Lau, K.K. and Shariff, A.M. (2016) High frequency ultrasonic assisted mass-transfer for water batch reactor. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1660-1665. ISSN 18196608

Tiong, L. and Komiyama, M. and Uemura, Y. and Nguyen, T.T. (2016) Catalytic supercritical water gasification of microalgae: Comparison of Chlorella vulgaris and Scenedesmus quadricauda. Journal of Supercritical Fluids, 107. pp. 408-413. ISSN 08968446

Tan, L.S. and Shariff, A.M. and Tay, W.H. and Lau, K.K. and Halim, H.N.A. (2016) Integrated mathematical modeling for prediction of rich CO2 absorption in structured packed column at elevated pressure conditions. Journal of Natural Gas Science and Engineering, 28. pp. 737-745. ISSN 18755100

U

Ullah, S. and Shariff, A.M. and Bustam, M.A. and Elkhalifah, A.E.I. and Gonfa, G. and Kareem, F.A.A. (2016) The Role of Multiwall Carbon Nanotubes in Cu-BTC Metal-Organic Frameworks for CO2 Adsorption. Journal of the Chinese Chemical Society, 63 (12). pp. 1022-1032. ISSN 00094536

Ullah, Z. and Bustam, M.A. and Man, Z. and Shah, S.N. and Khan, A.S. and Muhammad, N. (2016) Synthesis, characterization and physicochemical properties of dual-functional acidic ionic liquids. Journal of Molecular Liquids, 223. pp. 81-88. ISSN 01677322

Umrani, A.I. and Johl, S.K. (2016) Corporate governance, ownership structure and expropriation of rights: Case of Malaysian small and medium enterprises. International Journal of Economics and Financial Issues, 6 (3). pp. 170-178. ISSN 21464138

Ullah, S. and Bustam, M.A. and Shariff, A.M. and Gonfa, G. and Izzat, K. (2016) Experimental and quantum study of corrosion of A36 mild steel towards 1-butyl-3-methylimidazolium tetrachloroferrate ionic liquid. Applied Surface Science, 365. pp. 76-83. ISSN 01694332

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Farhan, S.A. and Salihi, I.U. (2016) Application of structural building information modeling (S-BIM) for sustainable buildings design and waste reduction: A review. International Journal of Applied Engineering Research, 11 (2). pp. 1523-1532. ISSN 09734562

Ullah, H. and Azizli, K.A.M. and Man, Z.B. and Che Ismail, M.B. and Khan, M.I. (2016) The potential of microencapsulated self-healing materials for microcracks recovery in self-healing composite systems: A review. Polymer Reviews, 56 (3). pp. 429-485. ISSN 15583724

Usmani, M.A. and Khan, I. and Ahmad, N. and Bhat, A.H. and Sharma, D.K. and Rather, J.A. and Hassan, S.I. (2016) Modification of Nanoclay Systems: An Approach to Explore Various Applications. Engineering Materials. pp. 57-83. ISSN 16121317

Ullah, B. and Ovinis, M. and Baharom, M.B. and Setiawan, J.D. and Ali, S.S.A. and Javaid, M.Y. (2016) Motion control strategy of an underwater glider in the presence of external disturbances. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13031-13037. ISSN 18196608

Uddin, F. and Taqvi, S.A. and Memon, I. (2016) Process simulation and sensitivity analysis of indirect coal gasification using aspen plus® model. ARPN Journal of Engineering and Applied Sciences, 11 (17). pp. 10546-10552. ISSN 18196608

Ullah, H. and Azizi Azizli, K. and Man, Z. and Khan, M.I. (2016) The impact of different polydimethylsiloxane core materials on the properties of melamine formaldehyde microcapsules. Key Engineering Materials, 694. pp. 58-63. ISSN 10139826

Ur Rehman, W. and Bhat, A.H. and Suliamon, A.A. and Khan, M.I. (2016) Effect of sonication on the stability of nanofluids based on the mixture of kapok seeds oil and multi walled carbon nanotubes. Key Engineering Materials, 694. pp. 213-217. ISSN 10139826

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Khamidi, M.F. and Salihi, I.U. (2016) Impact of construction waste minimization at construction site: Case study. Jurnal Teknologi, 78 (5-3). pp. 33-40. ISSN 01279696

Ullah, Z. and Azmi Bustam, M. and Man, Z. and Khan, A.S. (2016) Phosphonium-based ionic liquids and their application in separation of dye from aqueous solution. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1653-1659. ISSN 18196608

Ud Din, I. and Shaharun, M.S. and Subbarao, D. and Naeem, A. (2016) Surface modification of carbon nanofibers by HNO3 treatment. Ceramics International, 42 (1). pp. 966-970. ISSN 02728842

V

Vakili, M. and Rafatullah, M. and Ibrahim, M.H. and Abdullah, A.Z. and Salamatinia, B. and Gholami, Z. (2016) Chitosan hydrogel beads impregnated with hexadecylamine for improved reactive blue 4 adsorption. Carbohydrate Polymers, 137. pp. 139-146. ISSN 01448617

Van Ranst, E. and Padmanabhan, E. and Vandenberghe, R.E. and De Grave, E. and Mees, F. (2016) Yellowing of a red south african kandiudult, studied by means of mössbauer spectroscopy. Soil Science, 181 (2). pp. 75-81. ISSN 0038075X

Vandrangi, S.K. and Sharma, K.V. and Kamal, S. and Akilu, S. (2016) Heat transfer enhancement under turbulent flow for EG-water mixture of 40:60 ratio. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12942-12946. ISSN 18196608

Vasant, P.M. and Rahman, I. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2016) Optimal power allocation scheme for plug-in hybrid electric vehicles using swarm intelligence techniques. Cogent Engineering, 3 (1). ISSN 23311916

Valliappan, A.K. and Suppiah, R.R. and Irawan, S. and Bayuaji, R. (2016) Development of new green cement for oil wells. Materials Science Forum, 841. pp. 148-156. ISSN 02555476

W

Woldeyohannes, A.D. and Woldemichael, D.E. and Baheta, A.T. (2016) Sustainable renewable energy resources utilization in rural areas. Renewable and Sustainable Energy Reviews, 66. pp. 1-9. ISSN 13640321

Wong, M.K. and Bustam, M.A. and Shariff, A.M. (2016) In situ measurement of physical solubility of carbon dioxide in loaded aqueous monoethanolamine by Raman spectroscopy. Journal of Natural Gas Science and Engineering, 36. pp. 305-313. ISSN 18755100

Wan Kamarudin, W.N.I. and Buang, A. (2016) Small scale boilover and visualization of hot zone. Journal of Loss Prevention in the Process Industries, 44. pp. 232-240. ISSN 09504230

Waheed, N. and Mushtaq, A. and Tabassum, S. and Gilani, M.A. and Ilyas, A. and Ashraf, F. and Jamal, Y. and Bilad, M.R. and Khan, A.U. and Khan, A.L. (2016) Mixed matrix membranes based on polysulfone and rice husk extracted silica for CO2 separation. Separation and Purification Technology, 170. pp. 122-129. ISSN 13835866

Wong, H.Y. and Lau, K.K. and Drioli, E. and Seng, O.B. (2016) Nanoparticle separation using direct contact membrane distillation and its fouling study. Journal of Membrane Science and Research, 2 (4). pp. 186-192. ISSN 24765406

Wai Ling, L. and Wan Ahmad, W.F. and Ranjit Singh, T.K. (2016) Factors influencing behavioral intention to use the interactive white board among teachers. Journal of Theoretical and Applied Information Technology, 88 (1). pp. 145-153. ISSN 19928645

Wahab, N.A. and Rusli, R. and Shariff, A.M. and Rashid, E.A. and Ali, M.F.M. (2016) Selection of inherently safer preventive measures to reduce human error. Journal of Loss Prevention in the Process Industries, 41. pp. 323-332. ISSN 09504230

Woldemichael, D.E. and Woldeyohannes, A.D. (2016) Optimization of pressure vessel design using pyopt. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14264-14268. ISSN 18196608

Wei, W.H. and Gilani, S.I.U.-H. and Al-Kayiem, H. (2016) Setting up a remote accessing of a PV plant and its analysis. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13420-13425. ISSN 18196608

Wong, M.K. and Shariff, A.M. and Bustam, M.A. (2016) Raman spectroscopic study on the equilibrium of carbon dioxide in aqueous monoethanolamine. RSC Advances, 6 (13). pp. 10816-10823. ISSN 20462069

Y

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. (2016) Sorption-desorption mechanisms of imazapic and imazapyr herbicides on biochars produced from agricultural wastes. Journal of Environmental Chemical Engineering, 4 (4). pp. 3981-3989. ISSN 22133437

Yanagida, T. and Matsumura, Y. and Abdulkadir, B.A. and Afandi, S.S.B.M. and Osman, N. and Uemura, Y. (2016) Fossil Diesel Substitution Potential of Biodiesel Produced from Rubber Seed Oil as a Byproduct of Rubber Wood Plantation. Energy and Fuels, 30 (10). pp. 8031-8036. ISSN 08870624

Yavari, S. and Malakahmad, A. and Sapari, N.B. (2016) Effects of production conditions on yield and physicochemical properties of biochars produced from rice husk and oil palm empty fruit bunches. Environmental Science and Pollution Research, 23 (18). pp. 17928-17940. ISSN 09441344

Yassen, T.A. and Al-Kayiem, H.H. (2016) Experimental investigation and evaluation of hybrid solar/thermal dryer combined with supplementary recovery dryer. Solar Energy, 134. pp. 284-293. ISSN 0038092X

Yadzir, Z.H.M. and Shukor, M.Y. and Ahmad, A. and Nazir, M.S. and Shah, S.M.U. and Abdullah, M.A. (2016) Phenol removal by newly isolated Acinetobacter baumannii strain Serdang 1 in a packed-bed column reactor. Desalination and Water Treatment, 57 (28). pp. 13307-13317. ISSN 19443994

Yahyazadeh, A. and Abd Majid, M.A. (2016) Supply chain model for gas pipeline. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7841-7847. ISSN 18196608

Youssef, S.A.M. and Faisal, M. and Seo, J.K. and Kim, B.J. and Ha, Y.C. and Kim, D.K. and Paik, J.K. and Cheng, F. and Kim, M.S. (2016) Assessing the risk of ship hull collapse due to collision. Ships and Offshore Structures, 11 (4). pp. 335-350. ISSN 17445302

Yiin, C.L. and Yusup, S. and Mohamed, M. and Udomsap, P. and Yoosuk, B. and Sukkasi, S. (2016) Stabilization of empty fruit bunch derived bio-oil using solvents. Journal of Sustainable Development of Energy, Water and Environment Systems, 4 (1). pp. 38-47. ISSN 18489257

Yassen, T.A. and Al-Kayiem, H.H. (2016) Solar-biomass hybrid dryer enhanced by the Co-Gen technique. Drying Technology, 34 (3). pp. 287-295. ISSN 07373937

Yiin, C.L. and Yusup, S. and Quitain, A.T. and Sasaki, M. and Uemura, Y. and Kida, T. (2016) Microwave-assisted hydrothermal extraction of natural malic acid for the synthesis of low transition temperature mixtures. Journal of Cleaner Production, 113. pp. 919-924. ISSN 09596526

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Danish, M. and Alkali, A.U. (2016) Evaluation of chips formation of AISI 316L SS using precision end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12903-12907. ISSN 18196608

Yahyazadeh, A. and Abd Majid, M.A. (2016) Transportation programming model for gas network. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13059-13064. ISSN 18196608

Yin, K.Y. and Al-Kayiem, H.H. and Son, W.P.K. (2016) Numerical investigation on the effect of the inlets on the performance of oil/water separation in hydro cyclone. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13359-13364. ISSN 18196608

Yusoff, Y. and Bakar, A.A. and Aziz, N. and Ismail, R. and Ramli, R. (2016) Ascertaining trust of information transmitted during a disaster. Journal of Telecommunication, Electronic and Computer Engineering, 8 (6). pp. 119-124. ISSN 21801843

Ya, H.H. and EL-Sobky, H. (2016) Collapsed mode and specific energy absorption of glass filled polypropylene (GPE) and glass filled polyethylene (GPP) composite pipes under quasi-static axial loading. Key Engineering Materials, 673. pp. 141-149. ISSN 10139826

Yahya, S.M. and Abdullah, R.A. and Mohamad Ismail, M.A. and Mohamad, H. and Hezmi, M.A. and Jusoh, S.N. (2016) 3D numerical modelling of shallow tunnel in weathered granite incorporating multi-stage excavation and pre-support. Jurnal Teknologi, 78 (8-6). pp. 39-44. ISSN 01279696

Yanti, D.K. and Yusoff, M.Z. and Asirvadam, V.S. (2016) Single-trial visual evoked potential extraction using partial least-squares-based approach. IEEE Journal of Biomedical and Health Informatics, 20 (1). pp. 82-90. ISSN 21682194

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Alkali, A.U. and Danish, M. (2016) Effect of cutting speed and feed rate on surface roughness of AISI 316l SS using end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2496-2500. ISSN 18196608

Yiin, C.L. and Quitain, A.T. and Yusup, S. and Sasaki, M. and Uemura, Y. and Kida, T. (2016) Characterization of natural low transition temperature mixtures (LTTMs): Green solvents for biomass delignification. Bioresource Technology, 199. pp. 258-264. ISSN 09608524

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2016) Identification of transfer functions from surge motion response of a semisubmersible platform using time-varying NARX model. Applied Ocean Research, 54. pp. 53-66. ISSN 01411187

Z

Zahraee, S.M. and Khalaji Assadi, M. and Saidur, R. (2016) Application of Artificial Intelligence Methods for Hybrid Energy System Optimization. Renewable and Sustainable Energy Reviews, 66. pp. 617-630. ISSN 13640321

Zainal Abidin, M. and Rusli, R. and Buang, A. and Mohd Shariff, A. and Khan, F.I. (2016) Resolving inherent safety conflict using quantitative and qualitative technique. Journal of Loss Prevention in the Process Industries, 44. pp. 95-111. ISSN 09504230

Zainuddin, N. and Ibrahim, Z.B. and Othman, K.I. and Suleiman, M. (2016) Direct fifth order block backward differentiation formulas for solving second order ordinary differential equations. Chiang Mai Journal of Science, 43 (5). pp. 1171-1181. ISSN 01252526

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Investigating friction stir welding on thick nylon 6 plates. Welding Journal, 95 (6). 210s-218s. ISSN 00432296

Zardari, M.A. and Jung, L.T. (2016) Classification of file data based on confidentiality in cloud computing using K-NN classifier. International Journal of Business Analytics, 3 (2). pp. 61-78. ISSN 23344547

Zardari, M.A. and Jung, L.T. (2016) Data security rules/regulations based classification of file data using TsF-kNN algorithm. Cluster Computing, 19 (1). pp. 349-368. ISSN 13867857

Zavareh, M.A. and Sarhan, A.A.D.M. and Zavareh, P.A. and Razak, B.B.A. and Basirun, W.J. and Ismail, M.B.C. (2016) Development and protection evaluation of two new, advanced ceramic composite thermal spray coatings, Al2O3-40TiO2 and Cr3C2-20NiCr on carbon steel petroleum oil piping. Ceramics International, 42 (4). pp. 5203-5210. ISSN 02728842

Zabiri, H. and Marappagounder, R. and Lemma, T.D. (2016) A study on the closed-loop performance in extrapolated regions of operations of nonlinear systems using parallel OBF-NN models. Journal of Chemical Engineering of Japan, 49 (2). pp. 176-185. ISSN 00219592

Zin, R.M. and Coquelet, C. and Valtz, A. and Abdul Mutalib, M.I. and Sabil, K.M. (2016) Measurement of Henry's Law constant and infinite dilution activity coefficient of isopropyl mercaptan and isobutyl mercaptan in (methyldiethanolamine (1) + water (2)) with w1 = 0.25 and 0.50 at temperature of (298 to 348) K using inert gas stripping method. Journal of Chemical Thermodynamics, 93. pp. 193-199. ISSN 00219614

Zahari, M.H. and Guan, B.H. and Cheng, E.M. and Che Mansor, M.F. and Rahim, H.A. (2016) Electromagnetic interference (EMI) shielding performance of the ternary composite based on BaFe12O19, MWCNT and PANI at the Ku-band. Progress In Electromagnetics Research M, 52. pp. 111-118. ISSN 19378726

Zakaria, M.S. and Hassan, S. and Faizairi, M. (2016) Moisture content of the sewage sludge dried using thermal dryer. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14230-14232. ISSN 18196608

Zahidah, K.A. and Kakooei, S. and Pang, M.A.S.B.M.R. and Ismail, M.C. and Eng, K.K. and Raja, P.B. and Mustapha, M. (2016) Statistical analysis of effective variable parameters on corrosion rate of X52 carbons steel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12929-12936. ISSN 18196608

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Role of pin profile on material flow during friction stir welding of nylon-6. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13309-13312. ISSN 18196608

Zahraee, S.M. and Chegeni, A. and Toghtamish, A. (2016) The optimal parameter design for a welding unit of manufacturing industry by taguchi method and computer simulation. Journal of Industrial Engineering and Management, 9 (2). pp. 487-504. ISSN 20138423

Zaid, H.M. and Adil, M. and Chuan, L.K. (2016) The effect of calcination temperature on dielectric properties of ZnO and Al2O3 nanoparticles at radio frequencies. Key Engineering Materials, 708. pp. 9-13. ISSN 10139826

Zahari, M.H. and Guan, B.H. and Meng, C.E. and Mansor, M.F.C. and Chuan, L.K. (2016) EMI shielding effectiveness of composites based on barium ferrite, PANI, and MWCNT. Progress In Electromagnetics Research M, 52. pp. 79-87. ISSN 19378726

Zakaria, W.W.N.L. and Che Ismail, M. and Abd Karim, M.F. (2016) Inhibition effect of enhanced oil recovery (eor) surfactant on carbon steel corrosion. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12090-12093. ISSN 18196608

Zaman, N. and Tang Jung, L. and Yasin, M.M. (2016) Enhancing Energy Efficiency of Wireless Sensor Network through the Design of Energy Efficient Routing Protocol. Journal of Sensors, 2016. ISSN 1687725X

Zaid, H.F.M. and Kait, C.F. and Mutalib, M.I.A. (2016) Preparation and characterization of Cu-Fe/TiO2 photocatalyst for visible light deep desulfurization Penyediaan dan pencirian fotokatalis Cu-Fe/TiO2 untuk proses nyahsulfur di bawah cahaya tampak. Malaysian Journal of Analytical Sciences, 20 (4). pp. 713-725. ISSN 13942506

Zahid, M. and Ghazali, Z. and Ur Rahman, H. (2016) Corporate sustainability practices and reporting: A case of Malaysian real estate investment trusts and property listed companies. International Journal of Economics and Financial Issues, 6 (2). pp. 688-693. ISSN 21464138

Zahari, M.K. and Ahmad, B.H. and Wong, P.W. and Shairi, N.A. (2016) Comparative study of switchable filters and a new technique of bandstop to bandpass filter using lossy resonators. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3896-3903. ISSN 18196608

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Visual analysis of material flow during friction stir welding of nylon-6. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4186-4190. ISSN 18196608

Zandi, J. and Ghazvinei, P.T. and Hashim, R. and Yusof, K.B.W. and Ariffin, J. and Motamedi, S. (2016) Mapping of regional potential groundwater springs using Logistic Regression statistical method. Water Resources, 43 (1). pp. 48-57. ISSN 00978078

Zainal Abidin, M. and Rusli, R. and Mohd Shariff, A. and Khan, F.I. (2016) Three-Stage ISD Matrix (TIM) Tool to Review the Impact of Inherently Safer Design Implementation. Process Safety and Environmental Protection, 99. pp. 30-42. ISSN 09575820