A

Ali, A.M. and Padmanabhan, E. (2014) Quartz surface morphology of Tertiary rocks from North East Sarawak, Malaysia: Implications for paleo-depositional environment and reservoir rock quality predictions. Shiyou Kantan Yu Kaifa/Petroleum Exploration and Development, 41 (6). pp. 697-704. ISSN 10000747

Azmi, W.H. and Sharma, K.V. and Sarma, P.K. and Mamat, R. and Anuar, S. and Syam Sundar, L. (2014) Numerical validation of experimental heat transfer coefficient with SiO2 nanofluid flowing in a tube with twisted tape inserts. Applied Thermal Engineering, 73 (1). pp. 296-306. ISSN 13594311

Azmi, W.H. and Sharma, K.V. and Sarma, P.K. and Mamat, R. and Anuar, S. and Syam Sundar, L. (2014) Numerical validation of experimental heat transfer coefficient with SiO2nanofluid flowing in a tube with twisted tape inserts. Applied Thermal Engineering, 73 (1). pp. 294-304. ISSN 13594311

Albarody, T.M.B. and Al-Kayiem, H.H. (2014) Dynamic analysis of laminated composite thermo-magneto-electro-elastic shells. Journal of Mechanical Science and Technology, 28 (12). pp. 4877-4891. ISSN 1738494X

Aurelio, M.A. and Forbes, M.T. and Taguibao, K.J.L. and Savella, R.B. and Bacud, J.A. and Franke, D. and Pubellier, M. and Savva, D. and Meresse, F. and Steuer, S. and Carranza, C.D. (2014) Middle to late cenozoic tectonic events in south and central palawan (philippines) and their implications to the evolution of the south-eastern margin of South China Sea: Evidence from onshore structural and offshore seismic data. Marine and Petroleum Geology, 58 (PB). pp. 658-673. ISSN 02648172

Abd. Rahman, A.H. and Menier, D. and Mansor, M.Y. (2014) Sequence stratigraphic modelling and reservoir architecture of the shallow marine successions of Baram field, West Baram Delta, offshore Sarawak, East Malaysia. Marine and Petroleum Geology, 58 (PB). pp. 687-703. ISSN 02648172

Azmi, W.H. and Sharma, K.V. and Sarma, P.K. and Mamat, R. and Najafi, G. (2014) Heat transfer and friction factor of water based TiO2 and SiO2 nanofluids under turbulent flow in a tube. International Communications in Heat and Mass Transfer, 59. pp. 30-38. ISSN 07351933

Amok, J.O.M. and Saad, N.M. (2014) Error probability performance analysis for multicarrier direct sequence code division multiple access multiple-input-multiple-output systems over correlated η-μ fading channels. IET Communications, 8 (17). pp. 2971-2983. ISSN 17518628

Ali, T. and Jung, L.T. and Faye, I. (2014) End-to-End Delay and Energy Efficient Routing Protocol for Underwater Wireless Sensor Networks. Wireless Personal Communications, 79 (1). pp. 339-361. ISSN 09296212

Aja, O.C. and Al-Kayiem, H.H. (2014) Review of municipal solid waste management options in Malaysia, with an emphasis on sustainable waste-to-energy options. Journal of Material Cycles and Waste Management, 16 (4). pp. 693-710. ISSN 14384957

Ali, A. and Maqsood, K. and Syahera, N. and Shariff, A.B.M. and Ganguly, S. (2014) Energy minimization in cryogenic packed beds during purification of natural gas with high co2 content. Chemical Engineering and Technology, 37 (10). pp. 1675-1685. ISSN 09307516

Al-Kayiem, H.H. and Lin, S.C. (2014) Performance evaluation of a solar water heater integrated with a PCM nanocomposite TES at various inclinations. Solar Energy, 109 (1). pp. 82-92. ISSN 0038092X

Aja, O.C. and Oseghale, S.D. and Al-Kayiem, H.H. (2014) Review and evaluation of municipal solid waste management practices in Malaysia. Journal of Solid Waste Technology and Management, 40 (3). pp. 216-232. ISSN 10881697

Azeem, B. and Kushaari, K. and Man, Z.B. and Basit, A. and Thanh, T.H. (2014) Review on materials & methods to produce controlled release coated urea fertilizer. Journal of Controlled Release, 181 (1). pp. 11-21. ISSN 01683659

Ahyudanari, E. and Shafiq, N. and Kamaruddin, I. (2014) Identification and modelling process of defining temperature gradient in airport pavement. Aviation, 18 (2). pp. 72-79. ISSN 16487788

Ajab, H. and Yaqub, A. and Malik, S.A. and Junaid, M. and Yasmeen, S. and Abdullah, M.A. (2014) Characterization of toxic metals in tobacco, tobacco smoke, and cigarette ash from selected imported and local brands in Pakistan. The Scientific World Journal, 2014. ISSN 1537744X

Al-Amin Endut, M.N. and Yaacob, R.A.I.R. and Abdur-Rahman, M.A. and Abdullah, W.S.W. and Bakar, Z.A. (2014) The perception of al-'Adl in critical thinking: A comparative study of Muslim engineering undergraduates in Malaysian universities. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 65-75. ISSN 01287702

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2014) Managing process safety information based on process safety management requirements. Process Safety Progress, 33 (1). pp. 41-48. ISSN 10668527

Amir Khan, M. and Hasbullah, H. and Nazir, B. (2014) Providing optimal percentage reduction in coverage for mobile sensor networks. Life Science Journal, 11 (SPEC. ). pp. 136-142. ISSN 10978135

Atnaw, S.M. and Sulaiman, S.A. and Yusup, S. (2014) Influence of fuel moisture content and reactor temperature on the calorific value of Syngas resulted from gasification of oil palm fronds. The Scientific World Journal, 2014. ISSN 1537744X

Atnaw, S.M. and Kueh, S.C. and Sulaiman, S.A. (2014) Study on tar generated from downdraft gasification of oil palm fronds. The Scientific World Journal, 2014. ISSN 1537744X

Azam, M.R. and Tan, I.M. and Ismail, L. and Mushtaq, M. and Nadeem, M. and Sagir, M. (2014) Kinetics and Equilibria of Synthesized Anionic Surfactant onto Berea Sandstone. Journal of Dispersion Science and Technology, 35 (2). pp. 223-230. ISSN 01932691

Abdul Karim, S.A. and Mahinder Singh, B.S. (2014) Global solar radiation modeling using polynomial fitting. Applied Mathematical Sciences, 8 (5-8). pp. 367-378. ISSN 1312885X

Amir, A. and Mamat, O. (2014) Effects of SiO2 particles in mechanical properties of iron composite. Applied Mechanics and Materials, 465-46. pp. 886-890. ISSN 16609336

Alkali, A.U. and Gintar, T.L. and Fawad, H. and Abdulrani, A.M. (2014) Influence of preheat flux on the microstructure of 304 stainless steel. Applied Mechanics and Materials, 465-46. pp. 1287-1291. ISSN 16609336

Assadi, M.K. and Armaki, H.A. and Del, M.Z. (2014) Technical-economic analysis of steam double effect absorption chiller-heaters equipped with solar heat pipe system. Applied Mechanics and Materials, 465-46. pp. 327-334. ISSN 16609336

Akbarzadeh, O. and Mohd Zabidi, N.A. and Abdullah, B. and Subbarao, D. (2014) Influence of acid and thermal treatments on properties of carbon nanotubes. Advanced Materials Research, 832. pp. 394-398. ISSN 10226680

Alkali, A.U. and Ginta, T.L. and Abdul-Rani, A.M. (2014) Parametric control of oxyacetylene flame profile. Advanced Materials Research, 845. pp. 790-794. ISSN 10226680

Abd Majid, M.A. and Wassan, R.K. and Mokhtar, A.A. (2014) Semi-quantitative risk assessment matrix for rotating equipment. Advanced Materials Research, 845. pp. 647-651. ISSN 10226680

Al Batati, N. and Hashim, F.M. and Pao, W. (2014) Simulation of drill pipe lateral vibration due to riser's oscillation. Advanced Materials Research, 845. pp. 168-172. ISSN 10226680

Ahmad, R. and Saknakosnak, P. and Hooi, Y.K. (2014) Excel-database converting system using data normalization technique. Lecture Notes in Electrical Engineering, 285 LN. pp. 23-30. ISSN 18761100

Abdel-Aty, A.-H. and Zakaria, N. and Cheong, L.Y. and Metwally, N. (2014) Effect of the spin-orbit interaction on partial entangled quantum network. Lecture Notes in Electrical Engineering, 285 LN. pp. 529-537. ISSN 18761100

Ab. Rahim, L.B. and Bhattacharjee, S. and Aziz, I.B.A. (2014) An audio steganography technique to maximize data hiding capacity along with least modification of host. Lecture Notes in Electrical Engineering, 285 LN. pp. 277-289. ISSN 18761100

Alhussian, H. and Zakaria, N. and Hussin, F.A. and Bahbouh, H.T. (2014) A modified LRE-TL real-time multiprocessor scheduling algorithm. Lecture Notes in Electrical Engineering, 285 LN. pp. 335-344. ISSN 18761100

Ali, T. and Jung, L.T. and Faye, I. (2014) A reliable data flooding in underwater wireless sensor network. Lecture Notes in Electrical Engineering, 285 LN. pp. 499-511. ISSN 18761100

Adil, S.H. and Ali, S.S.A. and Raza, K. and Hussaan, A.M. (2014) An improved intrusion detection approach using synthetic minority over-sampling technique and deep belief network. Frontiers in Artificial Intelligence and Applications, 265. pp. 94-102. ISSN 09226389

Abdul Ghani, M.R. and Ching Peiching, O.P. (2014) Optimization of ethanol production from mango peels using response surface methodology. Applied Mechanics and Materials, 625. pp. 766-769. ISSN 16609336

Akbarzadeh, O. and Mohd Zabidi, N.A. and Abdullah, B. and Subbarao, D. (2014) Synthesis and characterization of Co/CNTs catalysts prepared by strong electrostatic adsorption (SEA) method. Applied Mechanics and Materials, 625. pp. 328-332. ISSN 16609336

Affam, A.C. and Chaudhuri, M. and Kutty, S.R.M. (2014) Optimization of modified fenton (FeGAC/ H2O2) pretreatment of antibiotics. Pertanika Journal of Science and Technology, 22 (1). pp. 239-254. ISSN 01287680

Arpit and Shafie, A. and Wan Ahmad, W.F. (2014) Automata for modeling the distributed probabilistic reversible processes. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8321. pp. 122-136. ISSN 03029743

Al-Azawie, S.S. and Hassan, S. and Zammeri, M.F. (2014) Experimental and numerical study on ground material absorptivity for solar chimney power applications. WIT Transactions on Ecology and the Environment, 186. pp. 219-230. ISSN 17433541

Al-Kayiem, H.H. and Theeb, M.A.W. (2014) Sustaining thermal power plant production in low water supply regions using cooling towers. WIT Transactions on Ecology and the Environment, 186. pp. 679-690. ISSN 17433541

Aziz, H.A. and Shariff, A.M. and Rusli, R. and Yew, K.H. (2014) Managing process chemicals, technology and equipment information for pilot plant based on Process Safety Management standard. Process Safety and Environmental Protection, 92 (5). pp. 423-429. ISSN 09575820

Ali, A.M. and Padmanabhan, E. (2014) Quartz surface morphology of Tertiary rocks from North East Sarawak, Malaysia: Implications for paleo-depositional environment and reservoir rock quality predictions. Petroleum Exploration and Development, 41 (6). pp. 761-770. ISSN 18763804

Akbar, A.R. and Awang, M. (2014) Performance prediction of inertial auto-reinforce magnetic flywheel energy storage device using finite element magnetic modeling. Applied Mechanics and Materials, 663. pp. 169-174. ISSN 16609336

Ayandotun, W.B. and Aziz, A.R.A. and Heikal, M.R. (2014) The effect of high carbon dioxide content on the performance and emission characteristics of a Direct Injection (DI) compressed natural gas engine. Applied Mechanics and Materials, 663. pp. 64-70. ISSN 16609336

Ayub, T. and Shafiq, N. and Fadhil Nuruddin, M. (2014) Stress-strain response of high strength concrete and application of the existing models. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1174-1190. ISSN 20407459

Al-Kayiem, H.H. (2014) Visualization of flow field and wake over clean and under-loaded wings. Applied Mechanics and Materials, 629. pp. 24-29. ISSN 16609336

Ahmad, M.A.R. and Nasiruddin, Z.R. and Rao, T.V.V.L.N. and Altaf, K. (2014) Overcoming limitation in DFM using layer manufacturing. Applied Mechanics and Materials, 660. pp. 94-98. ISSN 16609336

Afolabi, L.O. and Al-Kayiem, H.H. and Aklilu, T.B. (2014) Performance analysis of integrated collector system with immersed coil heat exchanger. Applied Mechanics and Materials, 660. pp. 740-744. ISSN 16609336

Akbarzadeh, O. and Zabidi, N.A.M. and Abdullah, B. and Subbarao, D. (2014) Synthesis of Co/CNTs via strong electrostatic adsorption: Effect of metal loading. Advanced Materials Research, 1043. pp. 101-104. ISSN 10226680

Ahmad, M.F.A. and Mohd Hashim, F.M. (2014) The correlation between variations of pressure against temperature distribution in supersonic subsea compact Wet-Gas Separators. Advanced Materials Research, 1043. pp. 258-262. ISSN 10226680

Abdulkadir, S.J. and Yong, S.-P. and Marimuthu, M. and Lai, F.-W. (2014) Hybridization of ensemble kalman filter and non-linear auto-regressive neural network for financial forecasting. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8891. pp. 72-81. ISSN 03029743

Azhar, M.A.I.M. and Chowdhury, S. and Mandal, P.C. and Daman, M.F. and Bhattacharjee, S. and Khanam, T. (2014) Ionic liquid-assisted synthesis and characterization of cerium oxide nanocubes for degradation of methylene blue. Applied Mechanics and Materials, 625. pp. 164-167. ISSN 16609336

Ali, H.E.A. and Shanab, S.M.M. and Abo-State, M.A.M. and Shalaby, E.A.A. and El Demerdash, U.M.N. and Abdullah, M.A. (2014) Screening of microalgae for antioxidant activities, carotenoids and phenolic contents. Applied Mechanics and Materials, 625. pp. 156-159. ISSN 16609336

Aziz, H.A. and Mohd Shariff, A. and Muhamad, M. (2014) Development of process safety management system (PSMS): Mechanical integrity (MI). Applied Mechanics and Materials, 625. pp. 486-489. ISSN 16609336

Ahmad, J. and Yusup, S. and Bokhari, A. and Kamil, R.N.M. (2014) Biodiesel production from the high free fatty acid �hevea brasiliensis� and fuel properties characterization. Applied Mechanics and Materials, 625. pp. 897-900. ISSN 16609336

Almustapha, S. and Ali Khan, A.A. and Omar, A.A. and Ariwahjoedi, B. and Abdullah, M.A. (2014) Cellulose-modified carbon electrode for in situ lead detection. Applied Mechanics and Materials, 625. pp. 136-139. ISSN 16609336

Abdullah, M.Z. and Sufian, S. and Abdul Hamid, F.H. (2014) Ph dependence on biosorption of PB (II) by p. Amaryllifolius roxb. Applied Mechanics and Materials, 625. pp. 757-760. ISSN 16609336

Al Kaisy, G.M.J. and Mutalib, M.I.A. and Bustam, M.A. and Razali, R.B. (2014) Optimization of naphthalene extraction from its mixture with base oil and dibenzothiophene by BMIMDMP ionic liquid using response surface methodology (RSM). Applied Mechanics and Materials, 625. pp. 50-56. ISSN 16609336

Azizan, M.T. and Hellgardt, K. and Chadwick, D. (2014) Thermodynamic analysis of autothermal reforming of oxygenated hydrocarbons at thermoneutral condition for hydrogen production. Applied Mechanics and Materials, 625. pp. 730-733. ISSN 16609336

Afzaal, M. and Periyasamy, B. and Abdullah, M.A. (2014) Continuous heavy metal removal from palm oil mill effluent using natural ceiba pentandra packed-bed column. Applied Mechanics and Materials, 625. pp. 822-825. ISSN 16609336

Ahmed, I. (2014) Preface. Applied Mechanics and Materials, 625. ISSN 16609336

Ali, H.E.A. and Shanab, S.M.M. and Abo-State, M.A.M. and Shalaby, E.A.A. and El Demerdash, U.M.N. and Abdullah, M.A. (2014) Evaluation of antioxidants, pigments and secondary metabolites contents in Spirulina platensis. Applied Mechanics and Materials, 625. pp. 160-163. ISSN 16609336

Abbas, T. and Abdul Mutalib, M.I. and Azmi Bustam, M. (2014) Developments in mercury removal from natural Gas-A short review. Applied Mechanics and Materials, 625. pp. 223-228. ISSN 16609336

Ahmed, S. and Ramli, A. and Yusup, S. (2014) Physicochemical properties of Diethanolamine-functionalized Si-MCM-41. Applied Mechanics and Materials, 625. pp. 11-14. ISSN 16609336

Azeem, B. and Kushaari, K. and Man, Z. and Subbarao, D. (2014) Recent advancements on superabsorbent polymers to produce controlled release urea (short review). Applied Mechanics and Materials, 625. pp. 761-765. ISSN 16609336

Ali, H.E.A. and Shanab, S.M.M. and Abo-State, M.A.M. and Shalaby, E.A.A. and El Demerdash, U.M.N. and Abdullah, M.A. (2014) Determination of antioxidant activities and total phenolic contents of three cyanobacterial species. Applied Mechanics and Materials, 625. pp. 826-829. ISSN 16609336

Ab Kadir, N.A. and Rusli, R. and Zaina Abidin, N.A. (2014) CFD study on syngas dispersion for biomass process industry. Applied Mechanics and Materials, 625. pp. 410-413. ISSN 16609336

Asif, A. and Man, Z. and Azizli, K.A.M. and Nuruddin, M.F. and Ismail, L. (2014) Effect of NAOH concentration on the strength of non sodium silicate fly ash geopolymer. Applied Mechanics and Materials, 625. pp. 102-105. ISSN 16609336

Abdullah, M.Z. and Yusup, S. and Mohd Bukhari, N.A. (2014) Synthesis and dehumidification performance of calcium chloride derived from the waste shells of Anadara granosa. Applied Mechanics and Materials, 625. pp. 924-927. ISSN 16609336

Ahmed, R. and Sinnathambi, C.M. and Eldmerdash, U. (2014) Dynamic studies of refinery sludge gasification in updraft reactor. Applied Mechanics and Materials, 625. pp. 431-434. ISSN 16609336

Abdul Mannan, H. and Mukhtar, H. and Murugesan, T. (2014) Polyethersulfone (PES) membranes for CO2/CH4 separation: Effect of polymer blending. Applied Mechanics and Materials, 625. pp. 172-175. ISSN 16609336

Azizan, M.T. and Hellgardt, K. and Chadwick, D. (2014) Ethanol steam reforming over calcium doped Ni/Al2O3 catalyst. Applied Mechanics and Materials, 625. pp. 271-274. ISSN 16609336

Abdul Rahim, R.H. and Azizli, K.A. and Man, Z. and Rahmiati, T. and Ismail, L. (2014) Effect of solid to liquid ratio on the mechanical and physical properties of fly ash geopolymer without sodium silicate. Applied Mechanics and Materials, 625. pp. 46-49. ISSN 16609336

Ali, A. and Ashraf, A.M. and Shariff, A.B.M. and Ganguly, S. (2014) Study of simultaneous mass transfer and nucleation in cryogenic packed bed for the removal of CO2 from natural gas. Applied Mechanics and Materials, 625. pp. 229-232. ISSN 16609336

Ahmed, I. and Idris, A. and Khan, M.S. and Chowdhury, S. and Akhtar, J. (2014) Effect of acetone on physical properties of PES membrane. Applied Mechanics and Materials, 625. pp. 545-548. ISSN 16609336

Abunowara, M. and Eldemerdash, U. and Awang, M. and Mady, H. (2014) Evaluation of carbon dioxide adsorption on Malaysian coals for potential sequestration. Applied Mechanics and Materials, 625. pp. 184-187. ISSN 16609336

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2014) Biomethane production and palm oil mill effluent treatment by co-cultivation of Nannochloropsis oculata. Applied Mechanics and Materials, 625. pp. 818-821. ISSN 16609336

Ajab, H. and Khan, A.A.A. and Dennis, J.O. and Abdullah, M.A. (2014) Bismuth-modified hydroxyapatite carbon electrode for heavy metal detection in biomatrices. Applied Mechanics and Materials, 625. pp. 813-817. ISSN 16609336

Abdul Karim, S.A. and Mohd Rosli, M.A. and Mohd Mustafa, M.I. (2014) Cubic spline interpolation for petroleum engineering data. Applied Mathematical Sciences, 8 (101-10). pp. 5083-5098. ISSN 1312885X

Al-Kayiem, H.H. and Hussein, A.K. and Jaleel, J.M. and Hussain, S.H. (2014) Numerical computation of 3-dimensional supersonic flow field over seamless missiles. Indian Journal of Science and Technology, 7 (10). pp. 1563-1572. ISSN 09746846

Asadpour, R. and Sapari, N.B. and Isa, M.H. and Orji, K.U. (2014) Enhancing the hydrophobicity of mangrove bark by esterification for oil adsorption. Water Science and Technology, 70 (7). pp. 1220-1228. ISSN 02731223

Ayub, T. and Shafiq, N. and Nuruddin, M.F. (2014) Effect of chopped basalt fibers on the mechanical properties and microstructure of high performance fiber reinforced concrete. Advances in Materials Science and Engineering, 2014. ISSN 16878434

Alipour Moghadam, R. and Yusup, S. and Azlina, W. and Nehzati, S. and Tavasoli, A. (2014) Investigation on syngas production via biomass conversion through the integration of pyrolysis and air-steam gasification processes. Energy Conversion and Management, 87. pp. 670-675. ISSN 01968904

Almahasneh, H. and Chooi, W.-T. and Kamel, N. and Malik, A.S. (2014) Deep in thought while driving: An EEG study on drivers' cognitive distraction. Transportation Research Part F: Traffic Psychology and Behaviour, 26 (PA). pp. 218-226. ISSN 13698478

Al-Jemeli, M. and Hussin, F.A. (2014) On location estimation methods for mobile wireless sensor nodes. Research Journal of Applied Sciences, Engineering and Technology, 8 (1). pp. 124-130. ISSN 20407459

Alnarabiji, M.S. and Yahya, N. and Bee Abd Hamid, S. and Azizi, K. and Shafie, A. and Solemani, H. (2014) Microwave synthesis of ZnO nanoparticles for enhanced oil recovery. Advanced Materials Research, 1024. pp. 83-86. ISSN 10226680

Akbar, A.R. and Awang, M.B. and Sawitri, D. (2014) Energy balance assessment of magnetic materials as theoretical hint for formulation of interoperable magnetic-mechanical equation. Advanced Materials Research, 1024. pp. 376-380. ISSN 10226680

Aljuboori, A.H.R. and Uemura, Y. and Osman, N.B. and Yusup, S. (2014) Production of a bioflocculant from Aspergillus niger using palm oil mill effluent as carbon source. Bioresource Technology, 171. pp. 66-70. ISSN 09608524

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2014) Enhanced palm oil mill effluent treatment and biomethane production by co-digestion of oil palm empty fruit bunches with Chlorella Sp. Canadian Journal of Chemical Engineering, 92 (9). pp. 1636-1642. ISSN 00084034

Aruchunan, E. and Muthuvalu, M.S. and Sulaiman, J. and Koh, W.S. and Akhir, K.M. (2014) An iterative solution for second order linear Fredholm integro-differential equations. Malaysian Journal of Mathematical Sciences, 8 (2). pp. 157-170. ISSN 18238343

Abdul-Rani, A.M. and Ismail, M.Z. and Zaky, M.A. and Noor, M.H.M. and Zhun, Y.Y. and Ganesan, K. and Rao, T.V.V.L.N. and Kamal, S. and Ginta, T.L. (2014) Improving rate of penetration for PDC drill bit using reverse engineering. Applied Mechanics and Materials, 607. pp. 153-160. ISSN 16609336

Ali, T. and Jung, L.T. and Faye, I. (2014) Classification of routing algorithms in volatile environment of underwater wireless sensor Networks. International Journal of Communication Networks and Information Security, 6 (2). pp. 129-147. ISSN 20760930

Akilu, S. and Narahari, M. (2014) Effects of heat generation or absorption on free convection flow of a nanofluid past an isothermal inclined plate. Advanced Materials Research, 970. pp. 267-271. ISSN 10226680

Abbas, A.H. and Fadhil, M. and Aris, M.S. and Ibrahim, A.B.A. and Aniza, N. (2014) A non-isothermal thermo gravimetric kinetic analysis of malaysian poultry-processing-dewatered-sludge. Advanced Materials Research, 970. pp. 217-223. ISSN 10226680

Albarody, T.M.B. and Mustaffa, Z.B. and Liew, M.S. (2014) Smart and robust composite tube columns frames for offshore sub-structure construction. Advanced Materials Research, 983. pp. 11-15. ISSN 10226680

Abdullah, S.B. and Man, Z. and Ismail, L. and Mutalib, M.I.A. and Bustam, M.A. (2014) Solubility parameters based on refractive index data of ionic liquid. Advanced Materials Research, 917. pp. 45-55. ISSN 10226680

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2014) Operational Training Management System (OPTRAMS) for safe operation in process plant. Advanced Materials Research, 917. pp. 325-331. ISSN 10226680

Abdullah, B.B. and Vo, D.-V.N. and Chowdhury, S. (2014) Modeling the effect of temperature-induced surface tension gradient in coating processes. Advanced Materials Research, 917. pp. 181-188. ISSN 10226680

Abdul Wahab, N. and Rusli, R. and Shariff, A.M. (2014) Evaluation of inherent safety strategies using FAHP to reduce human error. Advanced Materials Research, 917. pp. 332-341. ISSN 10226680

Ahmed, A. and Maulud, A. and Ramasamy, M. and Keng, L.K. and Mahadzir, S. (2014) Simulation of hydrodynamics and reaction behavior in an industrial RFCC riser. Advanced Materials Research, 917. pp. 267-282. ISSN 10226680

Alnarabiji, M.S. and Yahya, N. and Abd Hamid, S.B. and Azizi, K. and Kashif, M. and Qureshi, S. and Alqasem, B. (2014) The role of surface area of ZnO nanoparticles as an agent for some chemical reactions. Defect and Diffusion Forum, 354. pp. 201-213. ISSN 10120386

Al-Wakeel, H.B. and Abdul Karim, Z.A. and Al-Kayiem, H.H. (2014) Numerical simulation of microwave heating for soot oxidation. Applied Mechanics and Materials, 564. pp. 256-262. ISSN 16609336

Ayub, T. and Shafiq, N. and Nuruddin, M.F. (2014) Analytical prediction of the mechanical properties of high performance PVA fiber reinforced concrete. Applied Mechanics and Materials, 567. pp. 345-350. ISSN 16609336

Ahmad, F. and Aslam, M. and Raza, M.R. and Muhsan, A.S. and Shirazi, M.I. (2014) Experimental investigation on thermal conduction of carbon nanotubes reinforced copper matrix composites. Applied Mechanics and Materials, 564. pp. 455-460. ISSN 16609336

Aminu, M. and Matori, A.-N. and Yusof, K.W. and Zainol, R.B. (2014) Application of geographic information system (GIS) and analytic network process (ANP) for sustainable tourism planning in Cameron Highlands, Malaysia. Applied Mechanics and Materials, 567. pp. 769-774. ISSN 16609336

Al-Yacouby, A.M. and Kurian, J.V. and Sebastian, A.A. and Liew, M.S. and Idichandy, V.G. (2014) Effects of marine growth on hydrodynamic coefficients of rigid tubular cylinders. Applied Mechanics and Materials, 567. pp. 247-252. ISSN 16609336

Almattarneh, H. and Alwadie, A. and Malkawi, A. and Nuruddin, M.F. (2014) A novel method for monitoring hydration process of cement paste material. Applied Mechanics and Materials, 567. pp. 333-338. ISSN 16609336

Ahmed, M.O. and Yenduri, A. and Kurian, V.J. (2014) Behaviour of mooring systems for different line pretensions. Applied Mechanics and Materials, 567. pp. 204-209. ISSN 16609336

Albarody, T.M.B. and Zahiraniza, M.B. (2014) The laminated composite thermosetting pipe. Applied Mechanics and Materials, 567. pp. 535-538. ISSN 16609336

Al-Mattarneh, H. and Dahim, M. and Ismail, R. and Nuruddin, M.F. (2014) Determination of soil polluted with kerosene using electromagnetic cell. Applied Mechanics and Materials, 567. pp. 183-188. ISSN 16609336

Aswin, M. and Syed, Z.I. and Wee, T. and Liew, M.S. (2014) Prediction of failure loads of RC dapped-end beams. Applied Mechanics and Materials, 567. pp. 463-468. ISSN 16609336

Affam, A.C. and Chaudhuri, M. and Kutty, S.R.M. and Muda, K. (2014) UV Fenton and sequencing batch reactor treatment of chlorpyrifos, cypermethrin and chlorothalonil pesticide wastewater. International Biodeterioration and Biodegradation, 93. pp. 195-201. ISSN 09648305

Abbas Azeem, M. and Wan Ahmad, W.F. and Kalid, K.S. (2014) Semantic web technologies for pre-School cognitive skills tutoring system. Journal of Information Science and Engineering, 30 (3). pp. 835-851. ISSN 10162364

Ahmadian Mazraeh, A. and Ismail, F.B. and Alta'ee, A.F. (2014) RFEC pig designed for long-distance inspection. International Petroleum Technology Conference IPTC (Doha, Qatar, 1/19-22/2014) Proceedings.

Abbasi, A. and Mohd Hashim, F. (2014) Thermodynamic effects on hydrate formation in deepwater pipeline. Applied Mechanics and Materials, 548-54. pp. 607-611. ISSN 16609336

Ahmad, A. and Shah, S.M.U. and Buang, A. and Othman, M.F. and Abdullah, M.A. (2014) Evaluation of aerobic and anaerobic co-digestion of Tetraselmis suecica and oil palm empty fruit bunches by response surface methodology. Advanced Materials Research, 925. pp. 243-247. ISSN 10226680

Abdel-Aty, A.-H. and Zakaria, N. and Cheong, L.Y. and Metwallay, N. (2014) Quantum network via partial entangled state. Journal of Communications, 9 (5). pp. 379-384. ISSN 17962021

Aziz, H. and Ahmad, F. and Zia-ul-Mustafa, M. (2014) Effect of titanium oxide on fire performance of intumescent fire retardant coating. Advanced Materials Research, 935. pp. 224-228. ISSN 10226680

Ali, T. and Jung, L.T. and Faye, I. and Ameer, S. (2014) Bi-directional flooding protocol for underwater wireless sensor networks. Research Journal of Applied Sciences, Engineering and Technology, 7 (18). pp. 3775-3785. ISSN 20407459

Ahmad, M. and Zaman, N. and Jung, L.T. and Ilyas, M. and Rohaya, D.A. (2014) An integrated approach for medical image enhancement using wavelet transforms and image filtering. Life Science Journal, 11 (6). pp. 445-449. ISSN 10978135

Ansari, A. and Bt Shafie, A. and Ansari, S. and Md Said, A.B. and Rauf, M. and Nyamasvisva, E.T. (2014) Infomax algorithm for filtering airwaves in the field of seabed logging. Research Journal of Applied Sciences, Engineering and Technology, 7 (14). pp. 2914-2920. ISSN 20407459

Assaad, M. and Zubair, A.M. and Tang, T.B. (2014) A semi-cylindrical capacitive-based differential sensing system for water content in crude oil measurement. International Review on Modelling and Simulations, 7 (1). pp. 213-220. ISSN 19749821

Ansari, S. and Ansari, A. (2014) Comparative analysis of routing and wavelength assignment algorithms used in WDM optical networks. Research Journal of Applied Sciences, Engineering and Technology, 7 (13). pp. 2646-2654. ISSN 20407459

Ahmad, A. and Abdul Ghani, M.K. and Razali, S. and Sakidin, H. and Md Hashim, N. (2014) Haze reduction from remotely sensed data. Applied Mathematical Sciences (33-36). pp. 1755-1762. ISSN 1312885X

Ahmed, R. and Sinnathambi, C.M. and Eldmerdash, U. and Subbarao, D. (2014) Thermodynamics analysis of refinery sludge gasification in adiabatic updraft gasifier. The Scientific World Journal, 2014. ISSN 1537744X

Azmi, W.H. and Sharma, K.V. and Sarma, P.K. and Mamat, R. and Anuar, S. (2014) Comparison of convective heat transfer coefficient and friction factor of TiO2 nanofluid flow in a tube with twisted tape inserts. International Journal of Thermal Sciences, 81 (1). pp. 84-93. ISSN 12900729

Abdulkarim, M. and Shafie, A. and Ahmad, W.F.W. and Razali, R. (2014) Performance comparison between MLP neural network and exponential curve fitting on airwaves data. Lecture Notes in Electrical Engineering, 279 LN. pp. 1079-1087. ISSN 18761100

Affam, A.C. and Chaudhuri, M. (2014) Optimization of Fenton treatment of amoxicillin and cloxacillin antibiotic aqueous solution. Desalination and Water Treatment, 52 (10-12). pp. 1878-1884. ISSN 19443994

Ali, S.S.A. and Moinuddin, M. and Raza, K. and Adil, S.H. (2014) An adaptive learning rate for RBFNN using time-domain feedback analysis. The Scientific World Journal, 2014. ISSN 1537744X

Ahmed, K.Y. and Yahaya, N.Z. and Asirvadam, V.S. (2014) Optimal analysis and design of power electronic distribution transformer. Research Journal of Applied Sciences, Engineering and Technology, 7 (9). pp. 1734-1743. ISSN 20407459

Al Riza, D.F. and Gilani, S.I.-U.H. (2014) Standalone photovoltaic system sizing using peak sun hour method and evaluation by TRNSYS simulation. International Journal of Renewable Energy Research, 4 (1). pp. 109-114. ISSN 13090127

Abdul Hadi, M.H. and Ahmad, B.H. and Wong, P.W. and Shairi, N.A. (2014) An overview of isolation improvement techniques in RF switch. ARPN Journal of Engineering and Applied Sciences, 9 (3). pp. 342-348. ISSN 18196608

Abdul Karim, S.A. and Voon Pang, K. (2014) Local control of the curves using rational cubic spline. Journal of Applied Mathematics, 2014. ISSN 1110757X

Ab Rahman, A.A. and Ismail, M.C. (2014) Elucidating corrosion performance of weld in CO2 corrosion environment. Advanced Materials Research, 875-87. pp. 547-553. ISSN 10226680

Abdul Karim, Z.A. and Mohammad Mursal, M.A.H. and Mat Jamlus, M.H. (2014) High-frequency electromagnetic waves for diesel soot oxidation strategy. Advanced Materials Research, 875-87. pp. 1382-1386. ISSN 10226680

Abd Latib, E.H. and Suraya Mustfha, M. and Sufian, S. and Ku Shaari, K.Z. (2014) Methylene blue dye adsorption to durian shell activated carbon. Key Engineering Materials, 594-59. pp. 350-355. ISSN 10139826

Abidin, M.Z.Z. and Nour, U.M. and Shaari, K.Z.K. (2014) Effect of varying mixed refrigerant composition on main cryogenic heat exchanger performance. Key Engineering Materials, 594-59. pp. 13-17. ISSN 10139826

Abdullah, M.R.T.L. and Siraj, S. and Asra and Hussin, Z. (2014) Interpretive structural modeling of mlearning curriculum implementation model of english language communication skills for undergraduates. Turkish Online Journal of Educational Technology, 13 (1). pp. 151-161. ISSN 13036521

Abdalrahman, M.G. and Dennis, J.O. and Khir, M.H.M. (2014) Design and modeling of a CMOS MEMS gravimetric sensor. Applied Mechanics and Materials, 446-44. pp. 1073-1077. ISSN 16609336

Alhaj, H.M.M. and Nor, N.M. and Asirvadam, V.S. and Abdullah, M.F. (2014) Fundamental frequency estimation in power system through the utilization of sliding window-LMS method. Applied Mechanics and Materials, 446-44. pp. 764-771. ISSN 16609336

Abbas, T. and Ahmed Bazmi, A. and Waheed Bhutto, A. and Zahedi, G. (2014) Greener energy: Issues and challenges for Pakistan-geothermal energy prospective. Renewable and Sustainable Energy Reviews, 31. pp. 258-269. ISSN 13640321

Almadhoun, N.M. and Dominic, P.D.D. and Lai, F.W. (2014) Investigation of perceived security, privacy and trust on social networking sites for stakeholder relationships development in malaysian universities. International Journal of Business Information Systems, 15 (1). pp. 1-21. ISSN 17460972

Al-Batati, N. and Hashim, F.M. and Pao, K.S. (2014) Simulation of drill string vibration inside well bore due to Riser's Oscillation. Research Journal of Applied Sciences, Engineering and Technology, 7 (1). pp. 174-182. ISSN 20407459

Ahmad, J. and Yusup, S. and Bokhari, A. and Kamil, R.N.M. (2014) Study of fuel properties of rubber seed oil based biodiesel. Energy Conversion and Management, 78. pp. 266-275. ISSN 01968904

Ahmad, A.H. and Mahmood, A.K. and Jaafar, J. and Rahim, A.A.A. (2014) A study on intelligent system for fire rescue operation. Advanced Science Letters, 20 (1). pp. 3-7. ISSN 19366612

Abdalla, I.I. and Ibrahim, T. and Bin Mohd Nor, N. (2014) Analysis of a tubular linear permanent magnet motor for reciprocating compressor applications. Applied Mechanics and Materials, 448-45. pp. 2114-2119. ISSN 16609336

Al-Kayiem, H.H. and K.v., S. and Gilani, S.I.U.-H. (2014) Mathematical analysis of the influence of the chimney height and collector area on the performance of a roof top solar chimney. Energy and Buildings, 68 (PARTA). pp. 305-311. ISSN 03787788

B

Badruddin, N. and Evans, J. and Hanly, S.V. (2014) Binary power allocation in symmetric Wyner-type interference networks. IEEE Transactions on Wireless Communications, 13 (12). pp. 6903-6914. ISSN 15361276

Bin Mohd, M.H. and Kim, D.W. and Lee, B.J. and Kim, D.K. and Seo, J.K. and Paik, J.K. (2014) On the burst strength capacity of an aging subsea gas pipeline. Journal of Offshore Mechanics and Arctic Engineering, 136 (4). ISSN 08927219

Bennett, D.G. (2014) Scientific method and human dignity in the balance. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 139-147. ISSN 01287702

Bhattacharyya, E. and Sabdin, M. and Shaari, Z.H. (2014) Stepping up in harmony: Achieving cluster school excellence (CSE) Status for Non-CSE Malaysian secondary schools. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 51-63. ISSN 01287702

Bhattacharyya, E. (2014) Communicative competence in technical oral presentation: Perspective of ESL educators and professional engineer. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 1-16. ISSN 01287702

Bustam, M.A. and Muhamad, A.H. and Gonfa, G. and Man, Z. (2014) Benzene and cyclohexane separation using 1-propanenitrile-3-butylimidazolium dicyanamide ionic liquid. Advanced Materials Research, 879. pp. 58-62. ISSN 10226680

Bulmer, J.S. and Martens, J. and Kurzepa, L. and Gizewski, T. and Egilmez, M. and Blamire, M.G. and Yahya, N. and Koziol, K.K.K. (2014) Microwave conductivity of sorted CNT assemblies. Scientific Reports, 4. ISSN 20452322

Boo, K.K. and Ovinis, M. and Nagarajan, T. (2014) Contour optimization of an inductor using taguchi method. Applied Mechanics and Materials, 465-46. pp. 688-692. ISSN 16609336

Borhan, A. and Taha, M.F. and Hamzah, A.A. (2014) Characterization of activated carbon from wood sawdust prepared via chemical activation using potassium hydroxide. Advanced Materials Research, 832. pp. 132-137. ISSN 10226680

Besrour, S. and Rahim, L.B.A. and Dominic, P.D.D. (2014) The study of available techniques for existing requirements engineering challenges based on literature review evidences. Research Journal of Applied Sciences, Engineering and Technology, 8 (19). pp. 2082-2091. ISSN 20407459

binti Mohd Zulkefli, N.A. and Baharudin, B. (2014) Interlinked personal story information and user interest in weblog by RSS, FOAF, and SIOC technology. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8733. pp. 104-113. ISSN 03029743

Bin Md Seri, S. and Bin Abdul Karim, Z.A. and Bin Salleh, H. and Mohideen Batcha, M.F. and Raghavan, V.R. (2014) Hydrodynamic characteristics of flow around tube bank with integral wake splitter. Applied Mechanics and Materials, 660. pp. 649-653. ISSN 16609336

Butt, S.M. and Onn, A. and Butt, M.M. and Tabassam, N. (2014) Towards a model-based framework for integrating usability evaluation techniques in agile software model. Advances in Intelligent Systems and Computing, 287. pp. 561-570. ISSN 21945357

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2014) Application of experimental statistical method in optimizing preparation variables for Cu-Ni/TiO2 photocatalyst. Applied Mechanics and Materials, 625. pp. 856-859. ISSN 16609336

Bin Ramli, M.S. and Basit, A. and Ku Shaari, K.Z. and Keong, L.K. (2014) Study of the effect of surface roughness on droplet spreading behavior using CFD modeling. Applied Mechanics and Materials, 625. pp. 378-381. ISSN 16609336

Bokhari, A. and Yusup, S. and Ahmad, J. and Kamil, R.N.M. (2014) Parametric study and improvement in fuel properties of pre-blended methyl esters from crude palm and rubber seed oil. Applied Mechanics and Materials, 625. pp. 494-497. ISSN 16609336

Bawadi, A. and Vo, D.-V.N. (2014) An evaluation of fish scales as potential adsorbents: pH and concentration effect. Applied Mechanics and Materials, 625. pp. 73-76. ISSN 16609336

Ban, Z.H. and Kok Keong, L. and Shariff, A.M. (2014) Supersaturated gas bubble formation across an orifice. Applied Mechanics and Materials, 625. pp. 562-565. ISSN 16609336

Babiker, O.E. and Shuhaimi, M. and Mutalib, M.I.A. (2014) Molecular simulation for piperazinium based ILS: Effects of alkyl chain, concentration and anions on Henry�s constants. Applied Mechanics and Materials, 625. pp. 448-453. ISSN 16609336

Borhan, A. and Hoong, P.K. and Taha, M.F. (2014) Biosorption of heavy metal ions, oil and grease from industrial waste water by banana peel. Applied Mechanics and Materials, 625. pp. 749-752. ISSN 16609336

Bayuaji, R. and Nuruddin, M.F. (2014) Influence of microwave incinerated rice husk ash on hydration of foamed concrete. Advances in Civil Engineering, 2014. ISSN 16878086

Ban, Z.H. and Keong, L.K. and Shariff, A.M. (2014) Physical absorption of CO2 capture: A review. Advanced Materials Research, 917. pp. 134-143. ISSN 10226680

Bakar, S.A. and Yusup, S. and Ahmad, M.M. and Quitain, A.T. and Sasaki, M. and Goto, M. and Uemura, Y. and Ahmad, J. (2014) Comparative study on two-step fatty acid methyl ester (FAME) production from high FFA crude palm oil using microwave technique and conventional technique. Advanced Materials Research, 917. pp. 87-95. ISSN 10226680

Baig, I. and Jeoti, V. and Ikram, A.A. and Ayaz, M. (2014) PAPR reduction in mobile WiMAX: A novel DST precoding based random interleaved OFDMA uplink system. Wireless Networks, 20 (5). pp. 1213-1222. ISSN 10220038

Babangida, N.M. and Askari, M. and Yusof, K.W. and Muhammad, R.U.M. (2014) Comparison of soil water retention functions for humid tropical soils. Applied Mechanics and Materials, 567. pp. 8-13. ISSN 16609336

Bashardoust, S. and Mohamed, N.M. and Ong, B.H. and Zaine, S.N.A. (2014) Modified polyol-mediated synthesis of doped TiO2 nanoparticles as the photoanode in dye solar cells (DSCs). Advanced Materials Research, 925. pp. 575-579. ISSN 10226680

Bashiri, R. and Mohamed, N.M. and Chong, F.K. and Sufian, S. (2014) Study on synthesis and characterization of Cu -Ni doped TiO2 by solgel hydrothermal. Advanced Materials Research, 925. pp. 396-400. ISSN 10226680

Bashiri, R. and Mohamed, N.M. and Chong, F.K. and Sufian, S. (2014) Study on synthesis and characterization of Cu -Ni doped TiO2 by solgel hydrothermal. Advanced Materials Research, 925. pp. 248-252. ISSN 10226680

Borhan, A. and Johari, M.M.M. (2014) Removal of monoethanolamine from wastewater by composite reverse osmosis membrane. Jurnal Teknologi (Sciences and Engineering), 68 (5). pp. 53-58. ISSN 01279696

Ben-Awuah, J. and Andriamiaja, S. and Mijinyawa, A. and Ali, A. and Siddiqui, N.A. and Adda, G.W. (2014) Effect of some input parameters on 3D basin and petroleum systems modelling: A case study of the norwegian section of the northern North Sea. Research Journal of Applied Sciences, Engineering and Technology, 7 (18). pp. 3746-3762. ISSN 20407459

Bin Abdullah, M.F. and Baharudin, Z. and Bin Hamid, N.H. (2014) The third harmonic model for salient pole synchronous generator under balanced load. IEEE Transactions on Energy Conversion, 29 (2). pp. 519-526. ISSN 08858969

Bataee, M. and Irawan, S. and Kamyab, M. (2014) Artificial neural network model for prediction of drilling rate of penetration and optimization of parameters. Journal of the Japan Petroleum Institute, 57 (2). pp. 65-70. ISSN 13468804

Bokhari, A. and Yusup, S. and Kamil, R.N.M. and Junaid, A. (2014) Blending study of palm oil methyl esters with rubber seed oil methyl esters to improve biodiesel blending properties. Chemical Engineering Transactions, 37. pp. 571-576. ISSN 22839216

Bhattacharya, S.K. and Tunio, S.Q. (2014) CBM a pathfinder of petroleum system? Research Journal of Applied Sciences, Engineering and Technology, 7 (13). pp. 2622-2626. ISSN 20407459

Ben-Awuah, J. and Padmanabhanb, E. (2014) Geochemical variations in hydrocarbon components distribution in a prograding deltaic sequence: A case study of the Baram Delta, offshore Sarawak basin, Malaysia. Research Journal of Applied Sciences, Engineering and Technology, 7 (11). pp. 2278-2285. ISSN 20407459

Baharudin, Z. and Azman Zakariya, M. and HarisMdKhir, M. (2014) AR-based algorithms for short term load forecast. Research Journal of Applied Sciences, Engineering and Technology, 7 (6). pp. 1037-1043. ISSN 20407459

C

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Kinetic studies of co-pyrolysis of rubber seed shell with high density polyethylene. Energy Conversion and Management, 87. pp. 746-753. ISSN 01968904

Chan, Y.H. and Dang, K.V. and Yusup, S. and Lim, M.T. and Zain, A.M. and Uemura, Y. (2014) Studies on catalytic pyrolysis of empty fruit bunch (EFB) using Taguchi's L9 Orthogonal Array. Journal of the Energy Institute, 87 (3). pp. 227-234. ISSN 17439671

C. Fatah, M. and Ismail, M.C. and Ari-Wahjoedi, B. (2014) Corrosion behaviour of X52 steel in the presence of sulphite. Anti-Corrosion Methods and Materials, 61 (5). pp. 343-352. ISSN 00035599

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Comparative studies on catalytic and non-catalytic co-gasification of rubber seed shell and high density polyethylene mixtures. Journal of Cleaner Production, 70. pp. 303-314. ISSN 09596526

Chatterjee, K. and Mitra, M. and Ganguly, S. and Kargupta, K. and Banerjee, D. (2014) Thermoelectric performance of electrodeposited nanostructured polyaniline doped with sulfo-salicylic acid. Journal of Applied Polymer Science, 131 (4). ISSN 00218995

Choong, K.W. and Wen, L.P. and Tiong, L.L. and Anosike, F. and Shoushtari, M.A. and Saaid, I.B.M. (2014) A comparative study on sand transport modeling for horizontal multiphase pipeline. Research Journal of Applied Sciences, Engineering and Technology, 7 (6). pp. 1017-1024. ISSN 20407459

Ching, O.P. and Bak Lung, M.W. (2014) Effects of montmorillonite (MMT) inorganic fillers on polyvinylidene (PVDF) mixed matrix membrane. Applied Mechanics and Materials, 625. pp. 696-700. ISSN 16609336

Chakraborty, A. and Moniruzzaman, M. and Chowdhury, S. and Bhattacharjee, S. (2014) Kinetic studies on gold nanoparticle formation in aqueous medium. Applied Mechanics and Materials, 625. pp. 263-266. ISSN 16609336

Chowdhury, S. and Inayat, A. and Abdullah, B. and Omar, A.A. and Ganguly, S. (2014) Hydrogen and syngas generation from gasification of coal in an integrated fuel processor. Applied Mechanics and Materials, 625. pp. 644-647. ISSN 16609336

Chowdhury, S. and Leng, T.W. and Ahmed, I. and Bustam, A. and Shariff, A.M. (2014) Fine structural analysis of solvent activated Cu-BTC for carbon dioxide capture. Applied Mechanics and Materials, 625. pp. 209-212. ISSN 16609336

Chin, S.C. and Shafiq, N. and Kusbiantoro, A. and Nuruddin, M.F. (2014) Reinforced concrete deep beams with openings strengthened using FRP � A review. Advanced Materials Research, 1025-1. pp. 938-943. ISSN 10226680

Chan, Y.H. and Yusup, S. and Quitain, A.T. and Uemura, Y. and Sasaki, M. (2014) Bio-oil production from oil palm biomass via subcritical and supercritical hydrothermal liquefaction. Journal of Supercritical Fluids, 95. pp. 407-412. ISSN 08968446

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Gasification conversion and char reactivity of rubber seed shell and high density polyethylene mixtures using steam Co-Gasification process. Chemical Engineering Transactions, 39 (Specia). pp. 679-684. ISSN 22839216

Chin, B.L.F. and Yusup, S. and Al Shoaibi, A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Investigation of co-gasification of rubber seed shell and high density polyethylene mixtures. Chemical Engineering Transactions, 39 (Specia). pp. 505-510. ISSN 22839216

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Kamil Wan Abdullah, W.A. and Mior Mokhtar, M.M. (2014) Gas void formation in statically cooled waxy crude oil. International Journal of Thermal Sciences, 86. pp. 41-47. ISSN 12900729

Chong, F.K. and Mohd Eqram, B.A.K. and Hayyiratul Fatimah, B.M.Z. (2014) Cu-Fe/TiO2 photocatalyst for deep desulfurization process. Advanced Materials Research, 875-87. pp. 34-38. ISSN 10226680

Chua, H.-Q. and Ean, L.-W. and Mohammed, B.S. and Malek, M.A. and Wong, L.S. and Tang, C.-W. and Lee, Z.-K. and Lim, A.-F. and See, Y.-Y. and Ooi, J.-L. and Hashim, M. and Yong, U. and Abbas, N.A. and Yusop, H. and Muda, R.S. (2014) Potential use of cameron highlands reservoir sediment in compressed bricks. Key Engineering Materials, 594-59. pp. 487-491. ISSN 10139826

D

Dewangan, S. and Biswas, C.K. and Gangopadhyay, S. (2014) Influence of different tool electrode materials on EDMed surface integrity of AISI P20 tool steel. Materials and Manufacturing Processes, 29 (11-12). pp. 1387-1394. ISSN 10426914

Dan-Mallam, Y. and Abdullah, M.Z. and Megat Yusoff, P.S.M. (2014) The effect of hybridization on mechanical properties of woven kenaf fiber reinforced polyoxymethylene composite. Polymer Composites, 35 (10). pp. 1900-1910. ISSN 02728397

Dass, S.C. and Lim, C.Y. and Maiti, T. (2014) A generalized mixed model framework for assessing fingerprint individuality in presence of varying image quality. Annals of Applied Statistics, 8 (3). pp. 1314-1340. ISSN 19326157

Dubois, A. and Menier, D. and Sedrati, M. (2014) Morphologie and hydrodynamic impact of a period of high energy in the intertidal section of an embayed beach and in three mesotidal semi-sheltered pocket beaches: Example of the Xynthia storm in the Rhuys peninsula (France). Landbauforschung (3). pp. 227-242. ISSN 04586859

Dahalan, A.A. and Sulaiman, J. and Muthuvalu, M.S. (2014) Performance of HSAGE method with seikkala derivative for 2-D fuzzy poisson equation. Applied Mathematical Sciences, 8 (17-20). pp. 885-899. ISSN 1312885X

Daud, H. and Gulcharan, N.F.I. and Azhar, M.A.M. and Samsudin, M.Z. and Nor, N.M. and Ibrahim, T. (2014) Monitoring heart rate and body temperature using wireless technology (Zigbee). Applied Mechanics and Materials, 490-49. pp. 1565-1574. ISSN 16609336

Dan-Mallam, Y. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2014) Mechanical properties of recycled kenaf/polyethylene terephthalate (PET) fiber reinforced polyoxymethylene (POM) hybrid composite. Journal of Applied Polymer Science, 131 (3). ISSN 00218995

Daneshfozoun, S. and Abdullah, B. and Abdullah, M.A. (2014) Heavy metal removal by oil palm empty fruit bunches (OPEFB) biosorbent. Applied Mechanics and Materials, 625. pp. 889-892. ISSN 16609336

Daffalla, S.B. and Mukhtar, H. and Shaharun, M.S. (2014) Preparation and characterization of rice husk ash for adsorption of phenol from aqueous solutions. Applied Mechanics and Materials, 625. pp. 498-502. ISSN 16609336

Dang, K.V. and Yusup, S. and Uemura, Y. (2014) Studies on pyrolysis of rice husk using Taguchi's l9 Orthogonal Array. Applied Mechanics and Materials, 625. pp. 630-634. ISSN 16609336

Din, F.U. and Shaari, A.H. and Kamalianfer, A. and Navasery, M. and Yar, A. and Talib, Z.A. and Pah, L.K. and Kien, C.S. (2014) Modeling of electrical transport in YBCO single layer thin films using flux motion model. Journal of Magnetics, 19 (2). pp. 140-145. ISSN 12261750

Dominic, P.D.D. and Parthiban, P. (2014) Editorial. International Journal of Logistics Systems and Management, 18 (1). pp. 1-2. ISSN 17427967

Din, I.U. and Shaharun, M.S. and Subbarao, D. and Naeem, A. (2014) Synthesis, characterization and activity pattern of carbon nanofibres based Cu-ZrO2 catalyst in the hydrogenation of carbon dioxide to methanol. Advanced Materials Research, 925. pp. 349-353. ISSN 10226680

Drieberg, M. and Asirvadam, V.S. and Zheng, F.-C. (2014) Accurate delay analysis in prioritised wireless sensor networks for generalized packet arrival. IEEE Wireless Communications Letters, 3 (2). pp. 205-208. ISSN 21622337

Daneshfozoun, S. and Nazir, M.S. and Abdullah, B. and Abdullah, M.A. (2014) Surface modification of celluloses extracted from oil palm empty fruit bunches for heavy metal sorption. Chemical Engineering Transactions, 37. pp. 679-684. ISSN 22839216

Daud, H. and Nayan, M.Y. and Gulcharan, N.F.I. and Rahman, M.Z.A. and Nor, N.M. and Ibrahim, T. (2014) Design and implementation of an internal rechargeable powering source for zigbee transponders. World Applied Sciences Journal, 30 (30 A). pp. 103-109. ISSN 18184952

E

Ezechi, E.H. and Isa, M.H. and Kutty, S.R.M. and Yaqub, A. (2014) Boron removal from produced water using electrocoagulation. Process Safety and Environmental Protection, 92 (6). pp. 509-514. ISSN 09575820

Elsheikh, Y.A. and Man, Z. and Bustam, M.A. and Akhtar, F.H. and Yusup, S. and Muhammad, A. (2014) Preparation and characterisation of Citrulus colocynthis oil biodiesel: Optimisation of alkali-catalysed transesterification. Canadian Journal of Chemical Engineering, 92 (3). pp. 435-440. ISSN 00084034

El-Harbawi, M. and Yusri, Y.S.B. and Ismail Hossain, M. (2014) Toxicity assessment of phosphonium based ionic liquids towards female guppy fish. American Journal of Environmental Sciences, 9 (6). pp. 511-517. ISSN 1553345X

Ellateif, T.M.A. and Mitra, S. and Murugesan, T. and Azizi, K. (2014) Preparation and characterization of hydrophobic silica zirconium nanoparticles. Applied Mechanics and Materials, 625. pp. 503-508. ISSN 16609336

Elkhalifah, A.E.I. and Bustam, M.A. and Shariff, A.M. and Ullah, S. and Shimekit, B. and Riaz, N. (2014) Effects of intercalated mono-, di- and triethanolammonium cations on the structural and surface characteristics of sodium form of bentonite. Applied Mechanics and Materials, 625. pp. 98-101. ISSN 16609336

Elochukwu, O.H. and Saaid, I.M. and Pilus, R.M. (2014) Organic deposit remediation using environmentally benign solvents: A review. ARPN Journal of Engineering and Applied Sciences, 9 (10). pp. 1930-1935. ISSN 18196608

El-Harbawi, M. and Samir, B.B. and Babaa, M.-R. and Mutalib, M.I.A. (2014) A New QSPR Model for Predicting the Densities of Ionic Liquids. Arabian Journal for Science and Engineering, 39 (9). pp. 6767-6775. ISSN 2193567X

Eltoukhy, M.M. and Faye, I. (2014) An optimized feature selection method for breast cancer diagnosis in digital mammogram using multiresolution representation. Applied Mathematics and Information Sciences, 8 (6). pp. 2921-2928. ISSN 19350090

Ellateif, T.M.A. and Maitra, S. and Murugesan, T. and Mohd Azizi, K.A. (2014) Effect of aluminium sol on silica nanoparticles texture and properties. Advanced Materials Research, 917. pp. 56-60. ISSN 10226680

Elkhalifah, A.E.I. and Bustam, M.A.B. and Shariff, A.B.M. and Murugesan, T. (2014) Carbon dioxide retention on bentonite clay adsorbents modified by Mono-, Di- and triethanolamine compounds. Advanced Materials Research, 917. pp. 115-122. ISSN 10226680

Eisa, O. and Murugasan, T. and Mahadzir, S. (2014) Prediction of CO2 solubility in aqueous DEA and MDEA binary solutions using O'Connell's expression. Advanced Materials Research, 917. pp. 350-359. ISSN 10226680

Ezechi, E.H. and Kutty, S.R.B.M. and Isa, M.H. and Rahim, A.F.A. (2014) Treatment of wastewater using an integrated submerged attached growth system. Applied Mechanics and Materials, 567. pp. 167-171. ISSN 16609336

Eik, L.H. and Liew, M.S. (2014) A study on the structural failure mechanism and reserve strength ratio of Tarpon monopods. Applied Mechanics and Materials, 567. pp. 191-196. ISSN 16609336

Elsheikh, Y.A. and Man, Z. and Bustam, A. and Yusup, S. and Akhtar, F.H. and Mohamed, I.K. (2014) Evaluation of catalytic activityof two functionalized imidazolium ionic liquids for biodieselfuel production by a two-stage process. Journal of Chemical Technology and Biotechnology, 89 (7). pp. 998-1006. ISSN 02682575

Elshekh, A.E.A. and Shafiq, N. and Nuruddin, M.F. and Fathi, A. and Memom, F.A. (2014) An experimental study on the effectiveness of chopped basalt fiber on the fresh and hardened properties of high strength concrete. Research Journal of Applied Sciences, Engineering and Technology, 7 (16). pp. 3304-3311. ISSN 20407459

Elsheikh, Y.A. and Man, Z. and Akhtar, F.H. (2014) An acidic ionic liquid-conventional alkali-catalyzed biodiesel production process. Korean Journal of Chemical Engineering, 31 (3). pp. 431-435. ISSN 02561115

F

Firas, A.A.K. and Shariff, A.M. and Keong, L.K. and Mellon, N. (2014) Novel approach for CO2-enriched natural gas dehydration via adsorption using 13X zeolite as solid desiccants. Materials Research Innovations, 18. S6-228-S6-231. ISSN 14328917

Fayek, H.M. and Elamvazuthi, I. and Perumal, N. and Venkatesh, B. (2014) A controller based on Optimal Type-2 Fuzzy Logic: Systematic design, optimization and real-time implementation. ISA Transactions, 53 (5). pp. 1583-1591. ISSN 00190578

Fui, B.C.L. and Yusup, S. and Shoaibi, A.A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Comparison studies of Criado and coats-Redfern methods for co-gasification of rubber seed shell with high density polyethylene mixtures. Applied Mechanics and Materials, 472. pp. 621-625. ISSN 16609336

Faiz, A. and Sami, U. and Hammad, A. and Nor Sharifah, O. (2014) Thermal performance of glass fiber reinforced intumescent fire retardant coating for structural applications. Malaysian Journal of Microscopy, 10 (1). pp. 92-98. ISSN 18237010

Foong, O.-M. and Yong, J.-M. and Sulaiman, S. and Rambli, D.R.A. (2014) Mobile health awareness in pre-detection of mild stroke symptoms. Journal of Computer Science, 10 (12). pp. 2383-2394. ISSN 15493636

Fathiyah Jamaludin, S.N. and Pubellier, M. and Menier, D. (2014) Relationship between syn-depositional faulting and carbonate growth in Central Luconia Province, Malaysia. Bulletin of the Geological Society of Malaysia, 60. pp. 77-83. ISSN 01266187

Fageeri, S.O. and Ahmad, R. and Baharudin, B. (2014) A log file analysis technique using binary-based approach. Lecture Notes in Electrical Engineering, 285 LN. pp. 3-11. ISSN 18761100

Foong, O.-M. and Yong, S.-P. and Lee, A.-L. (2014) Text summarization in android mobile devices. Lecture Notes in Electrical Engineering, 285 LN. pp. 571-578. ISSN 18761100

Firas, A.A.K. and Shariff, A.M. and Keong, L.K. and Mellon, N. (2014) Novel approach and setup for multi component mixtures separation and analysis at offshore conditions. Applied Mechanics and Materials, 625. pp. 600-603. ISSN 16609336

Financie, R. and Moniruzzaman, M. and Uemura, Y. and Osman, N. (2014) Recent advances of using ionic liquid in lignocellulosic biomass degradation. Applied Mechanics and Materials, 625. pp. 834-837. ISSN 16609336

Faisal, A. and Ramasamy, M. and Shuhaimi, M. and Rahim, M. (2014) Identification of multi-input multi-output systems using combined direct and indirect methods. Applied Mechanics and Materials, 625. pp. 414-417. ISSN 16609336

Firas, A.A.K. and Shariff, A.M. and Keong, L.K. and Mellon, N. (2014) Novel approach and setup for multi phase mixtures separation and analysis at offshore conditions. Applied Mechanics and Materials, 625. pp. 669-672. ISSN 16609336

Faizal, A.M. and Kutty, S.R.M. (2014) Modelling of Adams-Bohart and Yoon-Nelson on the removal of oil from water using microwave incinerated rice husk ash (MIRHA). Applied Mechanics and Materials, 625. pp. 788-791. ISSN 16609336

Farnam, M. and Mukhtar, H. and Shariff, A.M. (2014) A review on glassy polymeric membranes for gas separation. Applied Mechanics and Materials, 625. pp. 701-703. ISSN 16609336

Fatah, I.Y.A. and Abdul Khalil, H.P.S. and Hossain, M.S. and Aziz, A.A. and Davoudpour, Y. and Dungani, R. and Bhat, A. (2014) Exploration of a chemo-mechanical technique for the isolation of nanofibrillated cellulosic fiber from oil palm empty fruit bunch as a reinforcing agent in composites materials. Polymers, 6 (10). pp. 2611-2624. ISSN 20734360

Fadhil, M. and Hassan, A. and Aris, S. and Abdalla, A. and Aniza, N. (2014) The prospects of electricity generation from Poultry Processing Dewatered Sludge (PPDS) in Malaysia. Advanced Materials Research, 970. pp. 228-232. ISSN 10226680

Fazli, H. and Wee, T. (2014) Rehabilitation of RC structures exposed to salinity and moisture using CFRP. Applied Mechanics and Materials, 567. pp. 488-493. ISSN 16609336

Farhan, S.A. and Shafiq, N. and Azizli, K.A.M. and Umar, U.A. and Gardezi, S.S.S. (2014) Embodied carbon of buildings: Tools, methods and strategies. Applied Mechanics and Materials, 567. pp. 565-570. ISSN 16609336

Fageeri, S.O. and Ahmad, R. and Baharudin, B.B. (2014) An enhanced Semi-Apriori algorithm for mining association rules. Journal of Theoretical and Applied Information Technology, 63 (2). pp. 298-304. ISSN 19928645

Fujita, Y. and Goh, K.N. and Chen, Y.Y. and Naono, K. (2014) Estimation of production rate limits using agent-based simulation for oil and gas plants safety. Advances in Intelligent Systems and Computing, 229 AI. pp. 83-94. ISSN 21945357

G

Ghosh, P. and Halder, D. and Ganguly, S. and Banerjee, D. and Kargupta, K. (2014) Phosphosilicate gel-polybenzimidazole nanocomposite novel membrane for fuel cell application. International Journal of Plastics Technology, 18 (3). pp. 403-408. ISSN 0972656X

Gupta, R. and Elamvazuthi, I. and Dass, S.C. and Faye, I. and Vasant, P. and George, J. and Izza, F. (2014) Curvelet based automatic segmentation of supraspinatus tendon from ultrasound image: A focused assistive diagnostic method. BioMedical Engineering Online, 13 (1). ISSN 1475925X

Ganesan, T. (2014) Investigation of dephasing in an open quantum system under chaotic influence via a fractional Kohn-Sham scheme. International Journal of Quantum Chemistry, 114 (24). pp. 1660-1669. ISSN 00207608

Gilani, S.I.H. and Aris, M.S. and Bhaskoro, P.T. (2014) Energy saving technique for cooling dominated academic building: Techno-economic analysis of its application. Applied Energy, 132. pp. 192-199. ISSN 03062619

Guan, B.H. and Chuan, L.K. and Soleimani, H. (2014) Synthesis, characterization and influence of calcinations temperature on magnetic properties of Ni0.75Zn0.25Fe2O4 nanoparticles synthesized by sol-gel technique. American Journal of Applied Sciences, 11 (6). pp. 878-882. ISSN 15469239

Ghazali, Z. and Halib, M. (2014) In the shadow of asset security: Corporate social responsibility Programme by the greater Nile petroleum operating company (GNPOC), Republic of Sudan. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 111-125. ISSN 01287702

Ganesan, T. and Elamvazuthi, I. and Zilati Ku Shaari, K. and Vasant, P. (2014) Hopfield differential evolution for multi-objective optimization of a cement-bonded sand mould system. International Journal of Management Science and Engineering Management, 9 (1). pp. 40-47. ISSN 17509653

Guan, B.H. and Zahari, M.H. and Chuan, L.K. (2014) Structural and magnetic properties of Ni0.5Zn0.5Fe2O4 synthesized through the sol-gel method. Applied Mechanics and Materials, 664. pp. 75-79. ISSN 16609336

Gardezi, S.S.S. and Shafiq, N. and Zawawi, N.A.W.A. and Farhan, S.A. (2014) Embodied carbon potential of conventional construction materials used in typical malaysian single storey low cost house using building information modeling (BIM). Advanced Materials Research, 1043. pp. 242-246. ISSN 10226680

Gilassi, S. and Man, Z. and Maulud, A.S. and Idris, A. (2014) Modeling of CO2 capture by amine solution (MDEA) in hollow fiber membranes. Applied Mechanics and Materials, 625. pp. 537-540. ISSN 16609336

Guangul, F.M. and Sulaiman, S.A. and Ramli, A. (2014) Study of the effects of operating factors on the resulting producer gas of oil palm fronds gasification with a single throat downdraft gasifier. Renewable Energy, 72. pp. 271-283. ISSN 09601481

Gardezi, S.S.S. and Shafiq, N. and Nurudinn, M.F. and Farhan, S.A. and Umar, U.A. (2014) Challenges for implementation of building information modeling (BIM) in Malaysian construction industry. Applied Mechanics and Materials, 567. pp. 559-564. ISSN 16609336

Ganesan, T. and Vasant, P. and Elamvazuthi, I. (2014) Hopfield neural networks approach for design optimization of hybrid power systems with multiple renewable energy sources in a fuzzy environment. Journal of Intelligent and Fuzzy Systems, 26 (5). pp. 2143-2154. ISSN 10641246

Guan, B.H. and Soleimani, H. and Yahya, N. and Latiff, N.R.A. (2014) Phase evolution and crystallite size of Ni0.25Zn0.75Fe2O4 at different calcination temperatures. Advanced Materials Research, 925. pp. 290-294. ISSN 10226680

Ghosh, D. and Sajid, M. and Ibrahim, N.A. and Viratno, B. (2014) Seismic attributes add a new dimension to prospect evaluation and geomorphology offshore Malaysia. Leading Edge, 33 (5). pp. 536-545. ISSN 1070485X

H

Hasan, M.H. and Jaafar, J. and Hassan, M.F. (2014) Monitoring web services� quality of service: a literature review. Artificial Intelligence Review, 42 (4). pp. 835-850. ISSN 02692821

Habib, K. and Saha, B.B. and Koyama, S. (2014) Study of various adsorbent-refrigerant pairs for the application of solar driven adsorption cooling in tropical climates. Applied Thermal Engineering, 72 (2). pp. 266-274. ISSN 13594311

Hassan, S. and Duclaux, L. and Lévêque, J.-M. and Reinert, L. and Farooq, A. and Yasin, T. (2014) Effect of cation type, alkyl chain length, adsorbate size on adsorption kinetics and isotherms of bromide ionic liquids from aqueous solutions onto microporous fabric and granulated activated carbons. Journal of Environmental Management, 144. pp. 108-117. ISSN 03014797

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2014) Syngas (H2/CO) in a spark-ignition direct-injection engine. Part 1: Combustion, performance and emissions comparison with CNG. International Journal of Hydrogen Energy, 39 (31). pp. 17884-17895. ISSN 03603199

Hidayat, M.I.P. and Wahjoedi, B.A. and Parman, S. and Megat Yusoff, P.S.M. (2014) Meshless local B-spline-FD method and its application for 2D heat conduction problems with spatially varying thermal conductivity. Applied Mathematics and Computation, 242. pp. 236-254. ISSN 00963003

Harun, H. and Salleh, R. and Memon, M.A. and Baharom, M.N.R. and Abdullah, A. (2014) Job satisfaction, organizational commitment and stress among offshore oil and gas platform employees. Asian Social Science, 10 (11). pp. 28-32. ISSN 19112017

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2014) Trends of syngas as a fuel in internal combustion engines. Advances in Mechanical Engineering, 2014. ISSN 16878132

Hani, A.F.M. and Sathyamoorthy, D. and Asirvadam, V.S. (2014) Computing uncertainty of physiographic features extracted from multiscale digital elevation models. Computers and Geosciences, 64. pp. 15-23. ISSN 00983004

Hussin, H. and Mokhtar, A.A. and Muhammad, M. (2014) Identification of critical factors to system performance using availability modeling and simulation analysis. Applied Mechanics and Materials, 490-49. pp. 1759-1763. ISSN 16609336

Haniffa, M.A.M. and Hashim, F.M. (2014) Recent developments in contra-flow crawler in pipeline. Applied Mechanics and Materials, 465-46. pp. 784-788. ISSN 16609336

Hasnain, S.A. and Nasif, M.S. and Pao, W. and Al-Waked, R. (2014) Numerical investigation on the effect of down stand structure in fire compartment on smoke contamination atrium upper balconies. Applied Mechanics and Materials, 465-46. pp. 480-484. ISSN 16609336

Hidayat, M.I.P. and Ariwahjoedi, B. and Setyamartana, P. and Megat Yusoff, P.S.M. and Rao, T.V.V.L.N. (2014) Meshless local B-spline basis functions-FD method and its application for heat conduction problem with spatially varying heat generation. Applied Mechanics and Materials, 465-46. pp. 490-495. ISSN 16609336

Habib, K. (2014) Performance study of activated carbon - Hydrofluoro olefin based adsorption cooling system. Applied Mechanics and Materials, 465-46. pp. 206-210. ISSN 16609336

Hussain, G. and Khan, F.U. and Khan, I.U. and Muhammad, N. and Jan, S. and Aziz, T. and Tariq, M. and Hussain, A. and Asimullah, A. and Bilal, H. and Shahidullah, S. and Abdullah, A. and Khan, S.U. and Ud Din, S. (2014) Chemical parameters and microbial analysis of potable water of various tehsils in North Waziristan agency. World Applied Sciences Journal, 32 (6). pp. 1053-1056. ISSN 18184952

Hasan, M.H. and Jaafar, J. and Hassan, M.F. (2014) Development of Web services fuzzy quality models using data clustering approach. Lecture Notes in Electrical Engineering, 285 LN. pp. 631-640. ISSN 18761100

Hing, Y.K. and Chin, W.M. and Heikal, M.R. (2014) Numerical and experimental determination of wavy fintube shape factor. Journal of Mechanical Engineering and Sciences, 6. pp. 889-900. ISSN 22894659

Hani, A.F.M. and Paputungan, I.V. and Hassan, M.F. (2014) Service level agreement renegotiation framework for trusted cloud-based system. Lecture Notes in Electrical Engineering, 276. pp. 55-61. ISSN 18761100

Hassim, M.H. and Foo, D.C.Y. and Shariff, A.M. (2014) Editorial. Process Safety and Environmental Protection, 92 (5). pp. 377-378. ISSN 09575820

Hussain, I. and Ullah, R. and AbdElsalam, N.M. and Hayat, S. and Uddin, K. and Khan, J. and Akhtar, N. and Ullah, Z. (2014) Antibacterial and preliminary phytochemicals screening of theraxicum officinale. Journal of Pure and Applied Microbiology, 8. pp. 535-538. ISSN 09737510

Hayder, G. and Ramli, M.Z. and Malek, M.A. and Khamis, A. and Hilmin, N.M. (2014) Prediction model development for petroleum refinery wastewater treatment. Journal of Water Process Engineering, 4 (C). pp. 1-5. ISSN 22147144

Hamdi, Z. and Awang, M. (2014) Introducing new slug size method in water alternating CO2 for enhanced oil recovery. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1239-1243. ISSN 20407459

Hassan, S. and H, H. and Ghaffari, A. (2014) Development of thermal insulation from oil palm fiber for chimney of fire tube steam packaged boiler. Applied Mechanics and Materials, 666. pp. 31-35. ISSN 16609336

Hui Ying, N. and Yin Fong, Y. (2014) Heavy metal ions removal using amine-functionalized mesoporous adsorbents. Applied Mechanics and Materials, 625. pp. 65-68. ISSN 16609336

Hosseinipour, A. and Sabil, K.M. and Arya Ekaputra, A. and Japper, A.B. and Ismail, L. (2014) The impact of the composition of the crude oils on the wax crystallization. Applied Mechanics and Materials, 625. pp. 196-200. ISSN 16609336

Hamzah, N.H.A. and Chowdhury, S. and Sufian, S. and Omar, A.A. and Inayat, A. (2014) Development of morphology dependent titania nanomaterial for photo degradation of dyes. Applied Mechanics and Materials, 625. pp. 349-352. ISSN 16609336

Herng, C.Y. and Yusup, S. and Quitain, A.T. and Uemura, Y. (2014) Bio-oil production under sub- and supercritical hydrothermal liquefaction of oil palm empty fruit bunch and Kernel Shell. Applied Mechanics and Materials, 625. pp. 881-884. ISSN 16609336

Hanaei, H. and Murugesan, T. (2014) Phase diagram of an aqueous salt-polymer system composed of poly ethylene glycol 4000 + Na3C6H5O7+ H2O. Applied Mechanics and Materials, 625. pp. 574-577. ISSN 16609336

Hamidi, R.M. and Man, Z. and Azizli, K.A. and Ismail, L. and Nuruddin, M.F. (2014) Mechanical activation of fly ash by high energy planetary ball mill and the effects on physical and morphology properties. Applied Mechanics and Materials, 625. pp. 38-41. ISSN 16609336

Hani, A.F.M. and Baba, R. and Shamsuddin, N. and Nugroho, H. (2014) Determination of melanin types and relative concentrations: An observational study using a non-invasive inverse skin reflectance analysis. International Journal of Cosmetic Science, 36 (5). pp. 451-458. ISSN 01425463

Hashmet, M.R. and Onur, M. and Tan, I.M. (2014) Empirical Correlations for Viscosity of Polyacrylamide Solutions with the Effects of Temperature and Shear Rate. II. Journal of Dispersion Science and Technology, 35 (12). pp. 1685-1690. ISSN 01932691

Hashim, F.M. and Ahmad, M.F.A. (2014) Numerical simulation of supersonic subsea compact wet gas separator for gas transmission pipeline. Applied Mechanics and Materials, 607. pp. 298-302. ISSN 16609336

Ho, W.S. and Khor, C.S. and Hashim, H. and Macchietto, S. and Klemeš, J.J. (2014) SAHPPA: A novel power pinch analysis approach for the design of off-grid hybrid energy systems. Clean Technologies and Environmental Policy, 16 (5). pp. 957-970. ISSN 1618954X

Harikrishnan, K. and Ashok, D. and Dominic, P.D.D. and Anand, S.J.J. (2014) A study on psychological modelling of market maven for marketing operations with special reference to Indian market. International Journal of Business Excellence, 7 (4). pp. 473-498. ISSN 17560047

Harimurt, S. and Ur Rahmah, A. and Aziz Omar, A. and Murugesan, T. (2014) UV/H2O2 process for removal of total organic carbon from refinery effluent: Screening of influence factors using response surface methodology. Advanced Materials Research, 917. pp. 168-177. ISSN 10226680

Hashim, A.M. and Noor, N.D.M. and Abdullah, S.N.H. (2014) Wave attenuation of Interlocking Concrete Unit - V (ICU-V). Applied Mechanics and Materials, 567. pp. 313-318. ISSN 16609336

Huan, V.N.P. and Harahap, I.S.H. (2014) Computational aspects of submarine slide generated tsunami. Applied Mechanics and Materials, 567. pp. 216-221. ISSN 16609336

Husna, T. and Aminuddin, A.G. and Nor Azazi, Z. (2014) The impact of stormwater runoff on nutrient removal in sand columns. Applied Mechanics and Materials, 567. pp. 155-160. ISSN 16609336

Hashim, A.M. and Khairuddin, N. (2014) Performance of mangrove forests in coastal protection. Applied Mechanics and Materials, 567. pp. 277-282. ISSN 16609336

Heng, G.C. and Isa, M.H. (2014) Electrochemical disintegration of activated sludge using Ti/RuO2 anode. Applied Mechanics and Materials, 567. pp. 44-49. ISSN 16609336

Hassaballa, A.A. and Matori, A.N. and Shafri, H.Z.M. (2014) Effect of soil depth on the quantification of soil moisture content value estimated from noaa satellite images. Applied Mechanics and Materials, 567. pp. 705-710. ISSN 16609336

Harahap, I.S.H. and Huan, V.N.P. (2014) Generation, propagation, run-up and impact of landslide triggered tsunami: A literature review. Applied Mechanics and Materials, 567. pp. 724-729. ISSN 16609336

Habte, A.D. and Onur, M. (2014) Laplace-transform finite-difference and quasistationary solution method for water-injection/falloff tests. SPE Journal, 19 (3). pp. 398-409. ISSN 1086055X

Hassaballa, A.A. and Althuwaynee, O.F. and Pradhan, B. (2014) Extraction of soil moisture from RADARSAT-1 and its role in the formation of the 6 December 2008 landslide at Bukit Antarabangsa, Kuala Lumpur. Arabian Journal of Geosciences, 7 (7). pp. 2831-2840. ISSN 18667511

Hor, Y. and Teo, W. (2014) A study on effective strains in different FRP shear strengthening schemes for analytical optimized truss models. Advanced Materials Research, 935. pp. 168-171. ISSN 10226680

Hussein, A.A.E. and Shafiq, N. and Nuruddin, M.F. (2014) Effect of microwave incinerated rice husk ash (MIRHA) on workability and compressive strength of concrete. Advanced Materials Research, 935. pp. 193-196. ISSN 10226680

Hasan, K.N.B.M. and Rauma, K. and Luna, A. and Candela, J.I. and Rodríguez, P. (2014) Harmonic compensation analysis in offshore wind power plants using hybrid filters. IEEE Transactions on Industry Applications, 50 (3). pp. 2050-2060. ISSN 00939994

Hamdi, Z. and Awang, M. (2014) CO2 minimum miscibility pressure determination of pure hydrocarbons in different temperatures using slimtube simulations. Research Journal of Applied Sciences, Engineering and Technology, 7 (15). pp. 3159-3163. ISSN 20407459

Hagos, F.Y. and Abd Aziz, A.R. (2014) Mass fraction burn investigation of lean burn low BTU gasification gas in direct-injection spark-ignition engine. SAE Technical Papers, 1. ISSN 01487191

Hussein, A.A.E. and Shafiq, N. and Nuruddin, M.F. and Memon, F.A. (2014) Compressive strength and microstructure of sugar cane bagasse ash concrete. Research Journal of Applied Sciences, Engineering and Technology, 7 (12). pp. 2569-2577. ISSN 20407459

Hooi, Y.K. and Hassan, M.F. and Shariff, A.M. (2014) A survey on ontology mapping techniques. Lecture Notes in Electrical Engineering, 279 LN. pp. 829-836. ISSN 18761100

Hashmet, M.R. and Onur, M. and Tan, I.M. (2014) Empirical Correlations for Viscosity of Polyacrylamide Solutions with the Effects of Salinity and Hardness. Journal of Dispersion Science and Technology, 35 (4). pp. 510-517. ISSN 01932691

Hanita, D. and Vijanth, S. and Ahmad, M.T. (2014) Delineation of hydrocarbon with variation of overburden thickness for sea bed logging applications. Advanced Materials Research, 875-87. pp. 1069-1075. ISSN 10226680

Hasan, M.H. and Jaafar, J. and Hassan, M.F. (2014) Fuzzy-based clustering of web services' quality of service: A review. Journal of Communications, 9 (1). pp. 81-90. ISSN 17962021

I

Ilyas, S.U. and Pendyala, R. and Marneni, N. (2014) Dispersion behaviour and agglomeration effects of zinc oxide nanoparticles in ethanol-water mixtures. Materials Research Innovations, 18. S6-179-S6-183. ISSN 14328917

Ilyas, S.U. and Pendyala, R. and Marneni, N. (2014) Preparation, sedimentation, and agglomeration of nanofluids. Chemical Engineering and Technology, 37 (12). pp. 2011-2021. ISSN 09307516

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. and Abdullah, M.Z. (2014) Preparation and structural characterization of template assisted electrodeposited copper nanowires. International Journal of Electrochemical Science, 9 (5). pp. 2548-2555. ISSN 14523981

Isa, M.H. and Ezechi, E.H. and Ahmed, Z. and Magram, S.F. and Kutty, S.R.M. (2014) Boron removal by electrocoagulation and recovery. Water Research, 51. pp. 113-123. ISSN 00431354

Idrus, H. and Dahan, H.M. and Abdullah, N. (2014) Integrating soft skills in the teaching of hard sciences at a private university: A preliminary study. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 17-32. ISSN 01287702

Izyan, Z.N. and Shuhaimi, M. (2014) Exergy analysis for fuel reduction strategies in crude distillation unit. Energy, 66. pp. 891-897. ISSN 03605442

Idaham, N.F. and Bustam, M.A. and Kait, C.F. and Man, Z. (2014) Recovery of 1-butyl-3-methylimidazolium-based ionic liquids. Advanced Materials Research, 879. pp. 230-236. ISSN 10226680

Irshad, K. and Habib, K. and Thirumalaiswamy, N. and Elmahdi, A.E.A. (2014) Performance analysis of photo voltaic trombe wall for tropical climate. Applied Mechanics and Materials, 465-46. pp. 211-215. ISSN 16609336

Iqbal, M.J. and Faye, I. and Md Said, A. and Samir, B.B. (2014) Data mining of protein sequences with amino acid position-based feature encoding technique. Lecture Notes in Electrical Engineering, 285 LN. pp. 119-126. ISSN 18761100

Ismail, A.F. and Sapari, N. and Abdul Wahab, M.M. (2014) Vegetative swale for treatment of stormwater runoff from construction site. Pertanika Journal of Science and Technology, 22 (1). pp. 55-64. ISSN 01287680

Iqbal, A. and Jeoti, V. (2014) An improved split-stepwavelet transform method for anomalous radiowave propagation modeling. Radioengineering, 23 (4). pp. 987-996. ISSN 12102512

Ismael, M.A. and Heikal, M.R. and Bahroom, M.B. (2014) Spray characteristics of diesel-CNG dual fuel jet using schlieren imaging technique. Applied Mechanics and Materials, 663. pp. 58-63. ISSN 16609336

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Effect of nitriding on reaction layer of diffusion bonded sialon to AISI 420 martensitic stainless steel. Applied Mechanics and Materials, 660. pp. 178-184. ISSN 16609336

Ibrahim, M.T. and Yusoff, N. (2014) Optimization of condensate fractionation unit using response surface methodology. Applied Mechanics and Materials, 625. pp. 462-465. ISSN 16609336

Idaham, N.F. and Bustam Khalil, M.A. and Kait, C.F. (2014) Study on the recovery of 1-butyl-3-methylimidazolium-based ionic liquids. Applied Mechanics and Materials, 625. pp. 144-147. ISSN 16609336

Irfan Khan, M. and Azizli, K. and Sufian, S. and Man, Z. (2014) Effect of Na/Al and Si/Al ratios on adhesion strength of geopolymers as coating material. Applied Mechanics and Materials, 625. pp. 85-89. ISSN 16609336

Irii, T. and Murata, S. and Tanoue, K. and Nishimur, T. and Uemura, Y. and Taniguchi, M. and Sasauchi, K. (2014) Experimental study on heat and mass transfer during fast pyrolysis of biomass particle. Applied Mechanics and Materials, 625. pp. 620-625. ISSN 16609336

Idris, A. and Man, Z.B. and Maulud, A.S. and Gilassi, S. (2014) Phase behavior and ternary diagram construction for membrane forming polycarbonate solutions. Applied Mechanics and Materials, 625. pp. 7-10. ISSN 16609336

Izhar, S.M.M. and Ku Shaari, K.Z. and Man, Z. and Samsudin, Y.N. (2014) Influence of citric acid and curing time on water uptake. Applied Mechanics and Materials, 625. pp. 123-126. ISSN 16609336

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2014) Mathematical modelling for hydrogen production from steam gasification of cellulose. Applied Mechanics and Materials, 625. pp. 176-179. ISSN 16609336

Irniza, R. and Emilia, Z.A. and Muhammad Saliluddin, S. and Nizam Isha, A.S. (2014) A psychometric properties of the Malay-version police stress questionnaire. Malaysian Journal of Medical Sciences, 21 (4). pp. 42-50. ISSN 1394195X

Idris, A. and Rahmanian, N. (2014) γ-ray pre-irradiated grafting of polytetrafluoroethylene film membrane. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 47-51. ISSN 01279696

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Microstructure and hardness of diffusion bonded sialon-AISI 420 martensitic stainless steel. Advanced Materials Research, 974. pp. 199-204. ISSN 10226680

Iqbal, M.J. and Faye, I. and Samir, B.B. and Md Said, A. (2014) Efficient feature selection and classification of protein sequence data in bioinformatics. Scientific World Journal, 2014. ISSN 23566140

Ilyas, S.U. and Pendyala, R. and Shuib, A.S. and Marneni, N. (2014) A review on the viscous and thermal transport properties of nanofluids. Advanced Materials Research, 917. pp. 18-27. ISSN 10226680

Izzuddin, A. and Akbar, I. (2014) Effect of flexural static load on the strength of GFRP gratings. Applied Mechanics and Materials, 567. pp. 387-392. ISSN 16609336

Imran, M. and Shafiq, N. and Akbar, I. (2014) Strengthening schemes for flexure and torsion using FRP laminates: A state of art review. Applied Mechanics and Materials, 567. pp. 511-516. ISSN 16609336

Imran, M. and Shafiq, N. and Akbar, I. (2014) Effects of eccentric load on un-strengthen and CFRP strengthened RC beams. Advanced Materials Research, 935. pp. 229-232. ISSN 10226680

Izzuddin, A. and Akbar, I. (2014) The strength of GFRP gratings under accelerated ageing process. Advanced Materials Research, 935. pp. 180-183. ISSN 10226680

Ibrahim, R. and Akbar, I. (2014) The bond strength of CFRP plated steel member submerged in saltwater. Advanced Materials Research, 935. pp. 176-179. ISSN 10226680

Islam, B. and Baharudin, Z. and Raza, Q. and Nallagownden, P. (2014) A hybrid neural network and genetic algorithm based model for short term load forecast. Research Journal of Applied Sciences, Engineering and Technology, 7 (13). pp. 2667-2673. ISSN 20407459

Ibrahim, A.L. and Md. Said, A. and Nisar, K. and Shah, P.A. and Mu'Azu, A.A. (2014) A distributed model to analyzed QoS parameters performance improvement for fixed WiMAX networks. Lecture Notes in Electrical Engineering, 279 LN. pp. 695-701. ISSN 18761100

J

Jatoi, M.A. and Kamel, N. and Malik, A.S. and Faye, I. (2014) EEG based brain source localization comparison of sLORETA and eLORETA. Australasian Physical and Engineering Sciences in Medicine, 37 (4). pp. 713-721. ISSN 01589938

Jamil, A. and Ching, O.P. and Shariff, A.B.M. (2014) Polymer-nanoclay mixed matrix membranes for CO2/CH4 separation: A review. Applied Mechanics and Materials, 625. pp. 690-695. ISSN 16609336

Jaber, A.K. and Shuker, M.T. (2014) Integrated petrophysical evaluation of a heterogeneous shaly-sand reservoir: A case study in nahr umr formation-subba giant oil field, Iraq. Research Journal of Applied Sciences, Engineering and Technology, 8 (24). pp. 2388-2402. ISSN 20407459

Jilani, M.T. and Wen, W.P. and Cheong, L.Y. and Zakariya, M.A. and Rehman, M.Z.U. (2014) Equivalent circuit modeling of the dielectric loaded microwave biosensor. Radioengineering, 23 (4). pp. 1038-1047. ISSN 12102512

Jamil, M.F. and Uemura, Y. and Osman, N. and Kusakabe, K. and Yusup, S. (2014) Review on extraction and characterization of castor seed oil. Applied Mechanics and Materials, 625. pp. 916-919. ISSN 16609336

Jamil, F. and Bawadi, B.A. and Ahmad, M.M. and Inayat, A. and Yusup, S. (2014) Catalytic cracking of synthetic bio-oil: Kinetic studies. Applied Mechanics and Materials, 625. pp. 259-262. ISSN 16609336

Johnson, O.A. and Napiah, M. and Kamaruddin, I. (2014) Potential uses of waste sludge in construction industry: A review. Research Journal of Applied Sciences, Engineering and Technology, 8 (4). pp. 565-570. ISSN 20407459

Javed, E. and Faye, I. and Malik, A.S. and Abdullah, J.M. (2014) A hybrid method to improve the reduction of ballistocardiogram artifact from EEG data. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8835. pp. 186-193. ISSN 03029743

Janier, J.B. and Jalil, M.A.B. and Razali, R.B. and Shafie, A.B. and Abdul Karim, S.A.B. (2014) Effects of varied amount of carbon dioxide and pressure on asphaltene stability. Advances in Environmental Biology, 8 (14). pp. 39-43. ISSN 19950756

Jusoh, N. and Lau, K.K. and Shariff, A.M. (2014) Removal of bulk CO2 from methane with the presenceof heavy hydrocarbon using polyimide membrane. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 41-46. ISSN 01279696

Johnson, O.A. and Madzlan, N. and Kamaruddin, I.B. (2014) Effect of curing age on the compressive strength of petrovege blocks. Advanced Materials Research, 980. pp. 91-96. ISSN 10226680

Jusoh, N. and Keng, L.K. and Shariff, A.M. (2014) Preparation and characterization of polysulfone membrane for gas separation. Advanced Materials Research, 917. pp. 307-316. ISSN 10226680

Jamlus, M.H.M. and Karim, Z.A.A. (2014) Attaining soot oxidation temperature by inductive coils exposed to electromagnetic waves. Applied Mechanics and Materials, 564. pp. 304-309. ISSN 16609336

Jamaludin, M.I. and Matori, A.N. and Kholik, M.F. and Mokhtar, M.M. (2014) Development spectral library of vegetation stress for hydrocarbon seepage. Applied Mechanics and Materials, 567. pp. 693-698. ISSN 16609336

Jatoi, M.A. and Kamel, N. and Malik, A.S. and Faye, I. and Begum, T. (2014) A survey of methods used for source localization using EEG signals. Biomedical Signal Processing and Control, 11 (1). pp. 42-52. ISSN 17468094

Jusoh, N. and Lau, K.K. and Shariff, A.M. and Yeong, Y.F. (2014) Capture of bulk CO2 from methane with the presence of heavy hydrocarbon using membrane process. International Journal of Greenhouse Gas Control, 22. pp. 213-222. ISSN 17505836

K

Khan, M.A. and Saddiq, S.F. and Islam, S. and Khan, I. and Ching, D.L.C. (2014) Epidemic model of leptospirosis containing fractional order. Abstract and Applied Analysis, 2014. ISSN 10853375

Karim, R.A. and Hussain, A.S. and Mohd Zain, A. (2014) Production of bioethanol from empty fruit bunches cellulosic biomass and Avicel PH-101 cellulose. Biomass Conversion and Biorefinery, 4 (4). pp. 333-340. ISSN 21906815

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. and Tan, I.M. (2014) Experimental investigation of microexplosion occurrence in water in diesel emulsion droplets during the leidenfrost effect. Energy and Fuels, 28 (11). pp. 7079-7084. ISSN 08870624

Khalid, S. and Wen, W.P. and Cheong, L.Y. (2014) Synthesis design of UWB bandpass filter using multiple resonance resonator (MRR). Electronics Letters, 50 (24). pp. 1851-1853. ISSN 00135194

Kazimi, M.R. and Shah, T. and Jamari, S.S.B. and Ahmed, I. and Faizal, C.K.M. (2014) Sulfonation of low-density polyethylene and its impact on polymer properties. Polymer Engineering and Science, 54 (11). pp. 2522-2530. ISSN 00323888

Kim, D.K. and Liew, M.S. and Youssef, S.A.M. and Mohd, M.H. and Kim, H.B. and Paik, J.K. (2014) Time-Dependent Ultimate Strength Performance of Corroded FPSOs. Arabian Journal for Science and Engineering, 39 (11). pp. 7673-7690. ISSN 2193567X

Kalwar, S.A. and Elraies, K.A. (2014) A rheological study of polymer using precipitation inhibitor, alkali, and surfactant for high salinity in carbonate reservoirs. Petroleum Science and Technology, 32 (19). pp. 2329-2336. ISSN 10916466

Kumar, A. and Hegde, G. and Manaf, S.A.B.A. and Ngaini, Z. and Sharma, K.V. (2014) Catalyst free silica templated porous carbon nanoparticles from bio-waste materials. Chemical Communications, 50 (84). pp. 12702-12705. ISSN 13597345

Kadry, H. and Zakaria, N. and Cheong, L.Y. and Abdel-Aty, M. (2014) Entropy squeezing of multi-photon field interacting with a single Cooper-pair box. Optik, 125 (18). pp. 5134-5140. ISSN 00304026

Kim, D.K. and Kim, H.B. and Zhang, X. and Li, C.G. and Paik, J.K. (2014) Ultimate strength performance of tankers associated with industry corrosion addition practices. International Journal of Naval Architecture and Ocean Engineering, 6 (3). pp. 507-528. ISSN 20926782

Khor, C.S. and Chachuat, B. and Shah, N. (2014) Fixed-flowrate total water network synthesis under uncertainty with risk management. Journal of Cleaner Production, 77. pp. 79-93. ISSN 09596526

Khor, C.S. and Chachuat, B. and Shah, N. (2014) Optimization of water network synthesis for single-site and continuous processes: Milestones, challenges, and future directions. Industrial and Engineering Chemistry Research, 53 (25). pp. 10257-10275. ISSN 08885885

Khalid, S. and Wen, W.P. and Cheong, L.Y. (2014) Optimum filter synthesis procedure for ultra-wideband bandpass filter using step-impedance resonator. Journal of Electromagnetic Waves and Applications, 28 (8). pp. 943-955. ISSN 09205071

Khan, D. and Khan, H.U. and Khan, F. and Khan, S. and Badshah, S. and Khan, A.S. and Samad, A. and Ali, F. and Khan, I. and Muhammad, N. (2014) New cholinesterase inhibitory constituents from Lonicera quinquelocularis. PLoS ONE, 9 (4). ISSN 19326203

Karim, A.N.M. and Ikram, M. and Emrul Kays, H.M. and Abdesselam, M. and Ginta, T.L. (2014) Assessment of machining cost for end-milling of Ti-6Al-4V titanium alloy through RSM-based parametric model. Advanced Materials Research, 903. pp. 83-89. ISSN 10226680

Kareem, M.W. and Habib, K. and Gilani, S.I. (2014) A review of solar air heater for drying of agricultural products. Advanced Materials Research, 903. pp. 239-244. ISSN 10226680

Khan, J.A. and Pao, W.K. (2014) Effect of different qualities of foam on fill particle transport in horizontal well cleanup operation using coiled tubing. Advanced Materials Research, 903. pp. 39-44. ISSN 10226680

Khalidah, K.A. and Rohani, S. and Mashitah, S. (2014) Ethical values and commitment towards achieving excellence: A study on public boarding school students in Malaysia. Pertanika Journal of Social Sciences and Humanities, 22 (March). pp. 33-50. ISSN 01287702

Khan, Z. and Yusup, S. and Ahmad, M.M. and Rashidi, N.A. (2014) Integrated catalytic adsorption (ICA) steam gasification system for enhanced hydrogen production using palm kernel shell. International Journal of Hydrogen Energy, 39 (7). pp. 3286-3293. ISSN 03603199

Karuppanan, S. and Abdul Wahab, A. and Patil, S. and Zahari, M.A. (2014) Estimation of burst pressure of corroded pipeline using finite element analysis (FEA). Advanced Materials Research, 879. pp. 191-198. ISSN 10226680

Khan, A.A. and Basri, S. and Fazal-e-Amin (2014) A survey based study on factors effecting communication in GSD. Research Journal of Applied Sciences, Engineering and Technology, 7 (7). pp. 1123-1131. ISSN 20407459

Kareem, M.W. and Habib, K. and Gilani, S.I. (2014) Lumped components modeling of double pass solar collector with porous matrixes. Applied Mechanics and Materials, 465-46. pp. 216-220. ISSN 16609336

Khan, K. and Baharudin, B. and Khan, A. and Ullah, A. (2014) Mining opinion components from unstructured reviews: A review. Journal of King Saud University - Computer and Information Sciences, 26 (3). pp. 258-275. ISSN 13191578

Konda, R.E. and Sulaiman, S.A. and Ariwahjoedi, B. (2014) Design and Development of Laboratory Scale Updraft Gasifier for Gasification of Oil Palm Fronds. Asian Journal of Scientific Research, 7 (3). pp. 341-353. ISSN 19921454

Kajo, I. and Kamel, N. and Malik, A.S. (2014) A comparison study on different crowd motion estimation algorithms using matlab. Lecture Notes in Electrical Engineering, 285 LN. pp. 327-334. ISSN 18761100

Khan, F.A. and Zahoor, M. and Ullah, R. and Abd El-Salam, N.M. and Khan, J. and Ullah, N. and Ullah, Z. (2014) Assessment of mycobiota and aflatoxins in poultry feeds collected from poultry farms. Journal of Pure and Applied Microbiology, 8. pp. 437-445. ISSN 09737510

Khan, H. and Daraz, N. and Khan, M.N. and Said, M. and Akhtar, N. and Badshah, A. and Khan, A.S. and Ali, M. (2014) Synthesis, Structural Characterization, and Evaluation of the Biological Properties of Heteroleptic Palladium(II) Complexes. Bioinorganic Chemistry and Applications, 2014. ISSN 15653633

Kutty, S.R.M. and Isa, M.H. and Nasiru, A. and Salihi, I.U. and Ezerie, H. (2014) Potential of the compact extended aeration reactor (CEAR) as an integrated system to biologically degrade municipal sewage according to Malaysian regulatory limits: Design, process and performance. WIT Transactions on Ecology and the Environment, 186. pp. 269-279. ISSN 17433541

Khan, M.A. and Hasbullah, H. and Nazir, B. and Khan, I.A. (2014) An energy efficient simultaneous-node repositioning algorithm for mobile sensor networks. Scientific World Journal, 2014. ISSN 23566140

Kurian, V.J. and Voon, M.C. and Wahab, M.M.A. and Liew, M.S. (2014) System reliability assessment of existing jacket platforms in Malaysian waters. Research Journal of Applied Sciences, Engineering and Technology, 8 (23). pp. 2305-2314. ISSN 20407459

Kee, K.E. and Richter, S. and Babic, M. and Nesic, S. (2014) Flow patterns and water wetting in oil-water two phase flow - A flow loop study. NACE - International Corrosion Conference Series. ISSN 03614409

Khan, M.T. and Zakariya, M.A. and Baharudin, Z. and Ibrahim, R. and Hong, S.S.B. and Adz, J.J. (2014) An Overview of defected ground structure with practical application of defected ground structure bandpass filter in energy harvester circuit. Research Journal of Applied Sciences, Engineering and Technology, 8 (7). pp. 837-843. ISSN 20407459

Karim, S.A.A. (2014) Monotonic interpolating curves by using rational cubic ball interpolation. Applied Mathematical Sciences, 8 (145-14). pp. 7259-7276. ISSN 1312885X

Kermanioryani, M. and Ismail, L.B. and Abdul Mutalib, M.I. and Bagherzadeh, G. (2014) Removal of methylene blue from aqueous solution by ionic liquid. Applied Mechanics and Materials, 625. pp. 241-244. ISSN 16609336

Krishnan, V. and Uemura, Y. and Yusup, S. and Osman, N. (2014) Aspects of carbon dioxide mitigation by Nannochloropsis oculata cultured in a photobioreactor. Applied Mechanics and Materials, 625. pp. 775-779. ISSN 16609336

Khan, A.S. and Man, Z.B. and Bustam Khalil, M.A. and Kait, C.F. and Maulud, A.S. (2014) Effect of ball milling on the catalytic conversion of cellulose to levulinic acid. Applied Mechanics and Materials, 625. pp. 353-356. ISSN 16609336

Khan, S. and Zain, A.M. and Murugesan, T. and Abdullah, M.A. (2014) Antioxidant activity and HPLC analysis of gallic acid phenolic compound from Nephelium lappaceum leaves. Applied Mechanics and Materials, 625. pp. 15-18. ISSN 16609336

Ku Shaari, K.Z. and Hassan, L.H. and Man, Z. (2014) Optimization of coating thickness in a tangential fluidized bed. Applied Mechanics and Materials, 625. pp. 131-135. ISSN 16609336

Khanam, T. and Rashedi, A. and Chowdhury, S. and Asundi, A.K. (2014) Comparison of image processing methods for the detection of particle from digital hologram. Applied Mechanics and Materials, 625. pp. 444-447. ISSN 16609336

Kaur, R. and Khan, A.A.A. and Dennis, J.O. and Abdullah, M.A. (2014) Screen-printed carbon electrodes for the detection of boldenone. Applied Mechanics and Materials, 625. pp. 809-812. ISSN 16609336

Khan, Z. and Yusup, S. and Ahmad, M.M. and Chin, B.L.F. (2014) Hydrogen production from palm kernel shell via integrated catalytic adsorption (ICA) steam gasification. Energy Conversion and Management, 87. pp. 1224-1230. ISSN 01968904

Karim, S.A.A. and Kong, V.P. (2014) Convexity-preserving using rational cubic spline interpolation. Research Journal of Applied Sciences, Engineering and Technology, 8 (3). pp. 312-320. ISSN 20407459

Khor, C.S. and Lee, T.F. and Nhlapo, D. and Lau, K.K. (2014) Optimal synthesis of ethylene production process. Chemical Engineering Transactions, 39 (Specia). pp. 1585-1590. ISSN 22839216

Kee, K.E. and Richter, S. and Babic, M. and Nesic, S. (2014) Flow patterns and water wetting in oil-water two phase flow - A flow loop study. NACE - International Corrosion Conference Series. ISSN 03614409

Kurian, V.J. and Sebastian, A.A. and Al-Yacouby, A.M. and Liew, M.S. and Idichandy, V.G. (2014) Wave forces on linear arrays of rigid vertical circular cylinders in regular waves. Research Journal of Applied Sciences, Engineering and Technology, 7 (24). pp. 5249-5257. ISSN 20407459

Kim, D.K. and Paik, J.K. (2014) Ultimate strength performance of tankers with various corrosion additions. Naval Architect (JUL-AU). pp. 54-56. ISSN 03060209

Kaeomanee, Y. and Dominic, P.D.D. and Rias, R.M. (2014) Examining the social software characteristics and knowledge sharing behaviour among university students in Malaysia. International Journal of Business Information Systems, 17 (1). pp. 67-93. ISSN 17460972

Khan, H. and Dominic, P.D.D. (2014) User acceptance of online system: A study of banking and airline sector. International Journal of Business Information Systems, 16 (4). pp. 359-374. ISSN 17460972

Khan, M.A. and Jeoti, V. (2014) A Novel Design of Chaos Based S-Box Using Difference Distribution Table (CD S-Box). Communications in Computer and Information Science, 420 CC. pp. 223-230. ISSN 18650929

Khan, Z. and Yusup, S. and Ahmad, M.M. (2014) Performance study of Ni catalyst with quicklime (CaO) as CO2 adsorbent in palm kernel shell steam gasification for hydrogen production. Advanced Materials Research, 917. pp. 283-291. ISSN 10226680

Kee, W.M. and Shariff, A.M. and Bustam, M.A. and Keong, L.K. and Karikalan, T. and Murshid, G. (2014) Density, viscosity and CO2 solubility of novel solvent. Advanced Materials Research, 917. pp. 301-306. ISSN 10226680

Kamal-Iqbal, N.H. and Yusoff, N. and Bahakim, S.S. (2014) Detection and correction of gain mismatches of wood-berry column using linear residual-input ratio. Advanced Materials Research, 917. pp. 209-219. ISSN 10226680

Khan, Z. and Yusup, S.S. and Ahmad, M.M. and Lai Fui, B.C. (2014) Performance study of Ni catalyst with quicklime (CaO) as CO2 adsorbent in palm kernel shell steam gasification for hydrogen production. Advanced Materials Research, 917. pp. 292-300. ISSN 10226680

Kurian, V.J. and Goh, S.S. and Wahab, M.M.A. and Liew, M.S. (2014) Reliability assessment model for aging jacket structures in Malaysian waters. Applied Mechanics and Materials, 567. pp. 283-288. ISSN 16609336

Kurian, V.J. and Voon, M.C. and Wahab, M.M.A. and Iskandar, N.A. and Liew, M.S. (2014) Multivariate regression analysis for screening process of reliability assessment. Applied Mechanics and Materials, 567. pp. 271-276. ISSN 16609336

Khan, R.A. and Liew, M.S. and Bin Ghazali, Z. (2014) Service and construction sector of Malaysia: Causality link (1991-2013). Applied Mechanics and Materials, 567. pp. 619-624. ISSN 16609336

Kurian, V.J. and Al-Yacouby, A.M. and Sebastian, A.A. and Liew, M.S. and Idichandy, V.G. (2014) Effect of anodes on hydrodynamic coefficients of tubular cylinders - Model tests. Applied Mechanics and Materials, 567. pp. 241-246. ISSN 16609336

Khan, S.U. and Nuruddin, M.F. and Shafiq, N. (2014) Strength development of concrete incorporating metakaolin and PVA fibres. Applied Mechanics and Materials, 567. pp. 505-510. ISSN 16609336

Khan, T. and Isa, M.H. and Chaudhuri, M. and Muhammad, R.U.M. and Saeed, M.O. (2014) Determination of adsorption capacity of agricultural-based carbon for Ni (II) adsorption from aqueous solution. Applied Mechanics and Materials, 567. pp. 20-25. ISSN 16609336

Kurian, V.J. and Wahab, M.M.A. and Kheang, T.S. and Liew, M.S. (2014) System reliability of existing jacket platform in Malaysian water (failure path and system reliability index). Applied Mechanics and Materials, 567. pp. 307-312. ISSN 16609336

Kutty, S.R.M. and Gasim, H.A. and Isa, M.H. (2014) The modelling of an anoxic-aerobic biological reactor. WIT Transactions on Ecology and the Environment, 180. pp. 213-221. ISSN 17433541

Kutty, S.R.M. and Ezechi, E.H. and Khaw, S.G. and Lai, C.L. and Isa, M.H. (2014) Evaluation of copper removal using MIRHA as an adsorbent in a continuous flow activated sludge system. WIT Transactions on Ecology and the Environment, 182. pp. 233-244. ISSN 17433541

Khanh, D.V.K. and Vasant, P. and Elamvazuthi, I. and Dieu, V.N. (2014) Optimization of thermo-electric coolers using hybrid genetic algorithm and simulated annealing. Archives of Control Sciences, 24 (2). pp. 155-176. ISSN 12302384

Kai, T. and Mak, G.L. and Wada, S. and Nakazato, T. and Takanashi, H. and Uemura, Y. (2014) Production of biodiesel fuel from canola oil with dimethyl carbonate using an active sodium methoxide catalyst prepared by crystallization. Bioresource Technology, 163. pp. 360-363. ISSN 09608524

Khan, S.U. and Nuruddin, M.F. and Shafiq, N. and Ayub, T. (2014) Effect of metakaolin and PVA fibres on the workability and mechanical properties of concrete. Advanced Materials Research, 935. pp. 188-192. ISSN 10226680

Karim, S.A.A. and Pang, K.V. (2014) Monotonicity-preserving using rational cubic spline interpolation. Research Journal of Applied Sciences, 9 (4). pp. 214-223. ISSN 1815932X

Khan, I.U. and Khan, F.U. and Hussain, J. and Badshah, S. and Muhammad, N. and Khan, R.A. and Kait, C.F. and Ali, M.A. and Khan, H. and Aslam, M.W. and Hussain, I. (2014) Asperal: A new clerodane diterpene from sonchus asper. Asian Journal of Chemistry, 26 (9). pp. 2699-2701. ISSN 09707077

Khan, K. and Baharudin, B. and Khan, A. (2014) Identifying product features from customer reviews using hybrid patterns. International Arab Journal of Information Technology, 11 (3). pp. 281-286. ISSN 16833198

Kaminaka, K. and Matsumura, Y. and Noaman Omar, W. and Uemura, Y. (2014) Process evaluation for torrefaction of empty fruit bunch in malaysia. Journal of the Japan Petroleum Institute, 57 (2). pp. 88-93. ISSN 13468804

Khan, K. and Baharudin, B.B. and Khan, A. (2014) Semantic-Based Unsupervised Hybrid Technique for Opinion Targets Extraction from Unstructured Reviews. Arabian Journal for Science and Engineering, 39 (5). pp. 3681-3689. ISSN 2193567X

Karim, S.A.A. (2014) Positivity preserving interpolation by using GC1 rational cubic spline. Applied Mathematical Sciences (41-44). pp. 2053-2065. ISSN 1312885X

Karim, S.A.A. and Hasan, M.K. and Sulaiman, J. (2014) Convexity preserving using GC1 cubic ball interpolation. Applied Mathematical Sciences (41-44). pp. 2087-2100. ISSN 1312885X

Karim, S.A.A. and Pang, K.V. (2014) Point control of the curves using rational quartic spline. Applied Mathematical Sciences (41-44). pp. 2067-2086. ISSN 1312885X

Khan, K. and Baharudin, B. and Khan, A. (2014) A review of unsupervised approaches of opinion target extraction from unstructured reviews. Research Journal of Applied Sciences, Engineering and Technology, 7 (12). pp. 2400-2410. ISSN 20407459

Kiah, M.L.M. and Zaidan, B.B. and Zaidan, A.A. and Nabi, M. and Ibraheem, R. (2014) MIRASS: Medical informatics research activity support system using information mashup network. Journal of Medical Systems, 38 (4). ISSN 01485598

Khan, S.U. and Nuruddin, M.F. and Ayub, T. and Shafiq, N. (2014) Effects of different mineral admixtures on the properties of fresh concrete. The Scientific World Journal, 2014. ISSN 1537744X

Kausar, N. and Samir, B.B. and Ahmad, I. and Hussain, M. (2014) Efficient intrusion detection system based on support vector machines using optimized kernel function. Journal of Theoretical and Applied Information Technology, 60 (1). pp. 55-63. ISSN 19928645

Keong, W.T. and Ahmad, F. and Sharif, S. and Moinser, M.A. (2014) Effects of drilling generated heat on damage factor in GFRP. Key Engineering Materials, 594-59. pp. 661-665. ISSN 10139826

Khor, C.S. and Lalchand, G. (2014) A review on sustainable power generation in Malaysia to 2030: Historical perspective, current assessment, and future strategies. Renewable and Sustainable Energy Reviews, 29. pp. 952-960. ISSN 13640321

L

Lai, L.S. and Yeong, Y.F. and Ani, N.C. and Lau, K.K. and Shariff, A.M. (2014) Effect of synthesis parameters on the formation of zeolitic imidazolate framework 8 (ZIF-8) nanoparticles for CO2 adsorption. Particulate Science and Technology, 32 (5). pp. 520-528. ISSN 02726351

Lee, K. and Saipolbahri, Z.A. and Guan, B.H. and Soleimani, H. (2014) Organic sol-gel method in the synthesis and characterization of zinc oxide nanoparticles. American Journal of Applied Sciences, 11 (8). pp. 1250-1254. ISSN 15469239

Lethesh, K.C. and Shah, S.N. and Mutalib, M.I.A. (2014) Synthesis, characterization, and thermophysical properties of 1,8-diazobicyclo5.4.0undec-7-ene based thiocyanate ionic liquids. Journal of Chemical and Engineering Data, 59 (6). pp. 1788-1795. ISSN 00219568

Lee, K. and Akmal Saipolbahri, Z. and Hoe Guan, B. and Soleimani, H. (2014) Organic sol-gel method in the synthesis and characterization of zinc oxide nanoparticles. American Journal of Applied Sciences, 11 (6). pp. 959-962. ISSN 15469239

Lee, K. and Weis, M. and Chen, X. and Taguchi, D. and Manaka, T. and Iwamoto, M. (2014) Metal nanoparticles in organic field-effect transistor: Transition from charge trapping to conduction mechanism. Thin Solid Films, 554. pp. 189-193. ISSN 00406090

Lemma, T.A. and Fakhruldin, M.H. (2014) Size optimization using normalized radial basis function and bat algorithm. Advanced Materials Research, 845. pp. 631-636. ISSN 10226680

Lee, K.C. and Yahya, N. and Che Yaccob, S.N. and Guan, B.H. (2014) Nano-yttrium aluminium garnet interfacial tension and viscosity for enhanced oil recovery. Advanced Materials Research, 1043. pp. 3-6. ISSN 10226680

Lal, B. (2014) Hydration behavior study of imidazolium based ILs in water. Applied Mechanics and Materials, 625. pp. 553-556. ISSN 16609336

Lok, C.C. and Yin Fong, Y. (2014) Synthesis and characterization of ZIF-8 mixed matrix membranes. Applied Mechanics and Materials, 625. pp. 661-664. ISSN 16609336

Loong, Y.C. and Yusup, S. and Uemura, Y. (2014) Delignification of empty fruit bunch (EFB) using low transition temperature mixtures (LTTMs): A review. Applied Mechanics and Materials, 625. pp. 741-744. ISSN 16609336

Lethesh, K.C. and Binti Hasnan, N.H. and Mutalib, M.I.A. (2014) Extractive desulphurization of model oil using sulphonium based ionic liquids. Applied Mechanics and Materials, 625. pp. 205-208. ISSN 16609336

Lai Fui, B.C. and Yusup, S. and Shoaibi, A.A. and Kannan, P. and Srinivasakannan, C. and Sulaiman, S.A. (2014) Kinetic analysis on catalytic co-gasification of rubber seed shell and high density polyethylene mixtures. Applied Mechanics and Materials, 625. pp. 251-254. ISSN 16609336

Lai, L.S. and Yin Fong, Y. and Che Ani, N. and Kok Keong, L. and Azmi, M.S. (2014) Effect of the solvent molar ratios on the synthesis of zeolitic imidazolate framework 8 (ZIF-8) and its performance in CO2 adsorption. Applied Mechanics and Materials, 625. pp. 69-72. ISSN 16609336

Lock, S.S.M. and Lau, K.K. and Shariff, A.M. (2014) Mathematical modeling of the radial crossflow hollow fiber membrane module for multi-component gas separation. Applied Mechanics and Materials, 625. pp. 726-729. ISSN 16609336

Lakshmanan, S. and Murugesan, T. (2014) Adsorption of chlorate from chlor-alkali plant purged brine stream. Applied Mechanics and Materials, 625. pp. 885-888. ISSN 16609336

Lam, M.K. and Lee, K.T. (2014) Cultivation of Chlorella vulgaris in a pilot-scale sequential-baffled column photobioreactor for biomass and biodiesel production. Energy Conversion and Management, 88. pp. 399-410. ISSN 01968904

Lee, Y.T. and Chowdhury, S. and Bustam, M.A. and Mutalib, M.I.A. and Norani, M.M. (2014) Morphology controlled ionothermal synthesis and characterization of ceria nanomaterials. Advanced Materials Research, 1024. pp. 112-115. ISSN 10226680

Lai, C.-Y. and Zakaria, N. (2014) Towards an intelligent framework for pressure-based 3D curve drawing. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8698 L. pp. 63-72. ISSN 03029743

Lawal, D.U. and Matori, A.-N. and Yusof, K.W. and Hashim, A.M. and Aminu, M. and Sabri, S. and Balogun, A.-L. and Chandio, I.A. and Mokhtar, M.R.M. (2014) group-based decision support for flood hazard forecasting: A geospatial technology-based group analytic hierarchy process approach. Research Journal of Applied Sciences, Engineering and Technology, 7 (23). pp. 4838-4850. ISSN 20407459

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. and Fadhil, M. (2014) Evaluation of spur gear pair on tooth root bending stress in yawing misalignment contactcondition. Advanced Materials Research, 980. pp. 97-101. ISSN 10226680

Lai, L.S. and Yeong, Y.F. and Keong Lau, K. and Azmi, M.S. (2014) Zeolitic Imidazolate Frameworks (ZIF): A Potential Membrane for CO2/CH4 Separation. Separation Science and Technology (Philadelphia), 49 (10). pp. 1490-1508. ISSN 01496395

Lee, S.-P. and Ramli, A. and Kutty, M.G. and Hamid, S.B.A. (2014) Incorporation of Pd nanoparticles on rod and necklace-like SBA-15 supports materials. Advanced Materials Research, 917. pp. 10-17. ISSN 10226680

Liew, M.S. and Zawawi, N.A.W.A. and Hashim, F.M. (2014) Raising the skills bar for deep water. Marine Technology, 51 (2). pp. 82-84. ISSN 00253316

Liang, Y. and Li, Z. and Nourdine, M. and Shahid, S. and Takanabe, K. (2014) Methane coupling reaction in an oxy-steam stream through an OH radical pathway by using supported alkali metal catalysts. ChemCatChem, 6 (5). pp. 1245-1251. ISSN 18673880

Lakshmanan, S. and Murugesan, T. (2014) The chlor-alkali process: Work in Progress. Clean Technologies and Environmental Policy, 16 (2). pp. 225-234. ISSN 1618954X

Low, T.J. and Yong, S.P. and Ung, C.L. and Leong, C.W. (2014) A new design of variable traction tracked system. Advanced Materials Research, 875-87. pp. 2036-2041. ISSN 10226680

M

Mohd Zabidi, N.A. and Pilus, R. and Rahman, S. and Ali, S. (2014) Characterisation of Co/Mn catalysts synthesised via reverse microemulsion method. Materials Research Innovations, 18. S6-477-S6-479. ISSN 14328917

Menier, D. and Pierson, B. and Chalabi, A. and Ting, K.K. and Pubellier, M. (2014) Morphological indicators of structural control, relative sea-level fluctuations and platform drowning on present-day and Miocene carbonate platforms. Marine and Petroleum Geology, 58 (PB). pp. 776-788. ISSN 02648172

Mansor, M.Y. and Rahman, A.H.A. and Menier, D. and Pubellier, M. (2014) Structural evolution of Malay Basin, its link to sunda block tectonics. Marine and Petroleum Geology, 58 (PB). pp. 736-748. ISSN 02648172

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2014) The effect of incorporating ionic liquid into polyethersulfone-SAPO34 based mixed matrix membrane on CO2 gas separation performance. Separation and Purification Technology, 135. pp. 252-258. ISSN 13835866

Mohd Shah, M.S.B. and Periyasamy, B. (2014) Binary cracking kinetics for thermal cracking of vacuum residues in Eureka process. Fuel, 134. pp. 618-627. ISSN 00162361

Mturi, G.A.J. and O'Connell, J. and Zoorob, S.E. and De Beer, M. (2014) A study of crumb rubber modified bitumen used in South Africa. Road Materials and Pavement Design, 15 (4). pp. 774-790. ISSN 14680629

Maqsood, K. and Mullick, A. and Ali, A. and Kargupta, K. and Ganguly, S. (2014) Cryogenic carbon dioxide separation from natural gas: A review based on conventional and novel emerging technologies. Reviews in Chemical Engineering, 30 (5). pp. 453-477. ISSN 01678299

Murugesan, R. and Dominic, P.D.D. (2014) Socio, economic and psychological determinants of entrepreneurial intentions: A structural equation model. Global Business and Economics Review, 16 (4). pp. 396-415. ISSN 10974954

Moghadam, R.A. and Yusup, S. and Uemura, Y. and Chin, B.L.F. and Lam, H.L. and Al Shoaibi, A. (2014) Syngas production from palm kernel shell and polyethylene waste blend in fluidized bed catalytic steam co-gasification process. Energy, 75. pp. 40-44. ISSN 03605442

Moradi, B. and Awang, M. and Bashir, A. and Sabil, K.M. (2014) Effects of alcohols on interfacial tension between carbon dioxide and crude oil at elevated pressures and temperature. Journal of Petroleum Science and Engineering, 121. pp. 103-109. ISSN 09204105

Mustafa, M.R. and Rezaur, R.B. and Rahardjo, H. and Isa, M.H. (2014) Closure to "Evaluation of MLP-ANN training algorithms for modeling soil pore-water pressure responses to rainfall" by M. R. Mustafa, R. B. Rezaur, S. Saiedi, H. Rahardjo, and M. H. Isa. Journal of Hydrologic Engineering, 19 (6). pp. 1272-1273. ISSN 10840699

Md. Saaid, I. and Mahat, S.Q.A. and Lal, B. and Mutalib, M.I.A. and Sabil, K.M. (2014) Experimental investigation on the effectiveness of 1-butyl-3- methylimidazolium perchlorate ionic liquid as a reducing agent for heavy oil upgrading. Industrial and Engineering Chemistry Research, 53 (19). pp. 8279-8284. ISSN 08885885

Mohamed Ramli, N. and Hussain, M.A. and Mohamed Jan, B. and Abdullah, B. (2014) Composition Prediction of a Debutanizer Column using Equation Based Artificial Neural Network Model. Neurocomputing, 131. pp. 59-76. ISSN 09252312

Mirza, A. and Hamid, N.H. and Khir, M.H.M. and Dennis, J.O. and Ashraf, K. and Shoaib, M. and Jan, M.T. (2014) A CMOS-MEMS cantilever sensor for capnometric applications. IEICE Electronics Express, 11 (9). ISSN 13492543

Mohammed, B.S. and Abdullahi, M. and Hoong, C.K. (2014) Statistical models for concrete containing wood chipping as partial replacement to fine aggregate. Construction and Building Materials, 55. pp. 13-19. ISSN 09500618

Mulubrhan, F. and Mokhtar, A.A. and Muhammad, M. (2014) Integrating reliability analysis in life cycle cost estimation of heat exchanger and pump. Advanced Materials Research, 903. pp. 408-413. ISSN 10226680

Mushtaq, M. and Tan, I.M. and Nadeem, M. and Devi, C. and Lee, S.Y.C. and Sagir, M. (2014) A convenient route for the alkoxylation of biodiesel and its influence on cold flow properties. International Journal of Green Energy, 11 (3). pp. 267-279. ISSN 15435075

Muhammad, N. and Man, Z. and Elsheikh, Y.A. and Bustam, M.A. and Mutalib, M.I.A. (2014) Synthesis and thermophysical properties of imidazolium-based bronsted acidic ionic liquids. Journal of Chemical and Engineering Data, 59 (3). pp. 579-584. ISSN 00219568

Md Nurul, S. and Azmi Bustam, M. and Yunus, M.N. and Man, Z. (2014) Solid supported hmimTf2N for CO2 adsorption. Advanced Materials Research, 879. pp. 149-154. ISSN 10226680

Munir, S. and Heikal, M.R. and Rashid, A. and Aziz, A. and Muthuvalu, M.S. and Jaafar, A. and Israr, M. (2014) Dynamical analysis of turbulent liquid phase in two-phase pipe flow. ScienceAsia, 40. pp. 63-68. ISSN 15131874

Mohammadat, M.T. and Ali, N.B.Z. and Hussin, F.A. and Zwolinski, M. (2014) Multivoltage aware resistive open fault model. IEEE Transactions on Very Large Scale Integration (VLSI) Systems, 22 (2). pp. 220-231. ISSN 10638210

Marneni, N. and Tippa, S. and Pendyala, R. (2014) Unsteady magnetohydrodynamic free convection flow of a radiative fluid past an infinite vertical plate with constant heat and mass flux. Applied Mechanics and Materials, 465-46. pp. 149-154. ISSN 16609336

Muhammad, I.D. and Awang, M. and Mamat, O. (2014) Modelling the elastic constants of cubic zirconia using molecular dynamics simulations. Advanced Materials Research, 845. pp. 387-391. ISSN 10226680

Mohmmed, A.O. and Al-Kayiem, H.H. and Nasif, M.S. and Mohammed, Z.I. (2014) Finite element analysis of fatigue in pipelines due to slug flow. Advanced Materials Research, 845. pp. 271-276. ISSN 10226680

Maoinser, M.A. and Ahmad, F. and Sharif, S. (2014) Effects of cutting parameters on hole integrity when drilling GFRP and HFRP composites. Advanced Materials Research, 845. pp. 960-965. ISSN 10226680

Mohammadpour, E. and Awang, M. (2014) Nonlinear multi-scale finite element method to predict tensile behavior of carbon nanotube-reinforced polymer composites. Journal of Nano Research, 26. pp. 169-176. ISSN 16625250

Muñiz Guinea, F. and Mángano, M.G. and Buatois, L.A. and Podeniene, V. and Gámez Vintaned, J.A. and Mayoral Alfaro, E. (2014) Compound biogenic structures resulting from ontogenetic variation: An example from a modern dipteran Estructuras biogénicas compuestas resultantes de variación ontogenética: Un ejemplo para un díptero moderno. Spanish Journal of Palaeontology, 29 (1). pp. 83-93. ISSN 22550550

Matsumura, Y. and Fukutomi, Y. and Uemura, Y. (2014) Comparative study of hydrothermal pretreatment of eucalyptus and oil palm empty fruit bunch for ethanol fermentation. Journal of the Japan Petroleum Institute, 57 (4). pp. 164-170. ISSN 13468804

Mohammadpour, E. and Awang, M. (2014) Investigation of carbon nanotube defects on its strength using nonlinear finite element modeling. Advanced Structured Materials, 54. pp. 383-390. ISSN 18698433

Mubashir, M. and Fong, Y.Y. and Keong, L.K. and Bin Sharrif, M.A. (2014) Synthesis and performance of deca-dodecasil 3 rhombohedral (DDR)-type zeolite membrane in co2 separation�a review. ASEAN Journal of Chemical Engineering, 14 (2). pp. 48-57. ISSN 16554418

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2014) Estimation of counterweight for shaking force balancing of a crank-rocker mechanism. Applied Mechanics and Materials, 663. pp. 135-140. ISSN 16609336

Mushtaq, A. and Mukhtar, H. and Shariff, A.M. (2014) Advanced development and characterization of DEA amine-polysulfone/polyvinylacetate blend membranes. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1201-1211. ISSN 20407459

Md Akhir, M.K. and Othman, M. and Suleiman, M. and Majid, Z.A. and Sulaiman, J. and Muthuvalu, M.S. and Aruchuan, E. (2014) QSMSOR iterative method for the solution of 2D homogeneous Helmholtz equations. International Journal of Mathematical Analysis, 8 (49-52). pp. 2493-2505. ISSN 13128876

Manikya Kanti, K. and Srinivasa Rao, P. and Ranga Janardhana, G. and Rani, A.M.A. (2014) Mathematical modeling for the prediction of depth of penetration in double pulse GMA welding using fractional factorial method. Applied Mechanics and Materials, 660. pp. 347-351. ISSN 16609336

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Megat Yusoff, P.S.M. and Raza, M.R. (2014) Homogeneous distribution of carbon nanotubes in copper matrix nanocomposites fabricated via combined technique. Nanoscience and Nanotechnology Letters, 6 (10). pp. 865-874. ISSN 19414900

Moniruzzaman, M. and Nao, Y. and Bhattacharjee, S. and Ono, T. (2014) Laccase incorporated into PEG-PLA polymer as active and stable biocatalyst for ionic liquids media. Applied Mechanics and Materials, 625. pp. 333-336. ISSN 16609336

Mohamed, N.F. and Mutalib, M.I.A. and B.Bustam, M.A. and Leveque, J.-M. and El Harbawi, M. (2014) Ecotoxicity of pyridinium based ionic liquids: A review. Applied Mechanics and Materials, 625. pp. 152-155. ISSN 16609336

Muhammad, A. and Pendyala, R. and Rahmanian, N. (2014) CFD simulation of droplet formation under various parameters in prilling process. Applied Mechanics and Materials, 625. pp. 394-397. ISSN 16609336

Majeed, Z. and Ramli, N.K. and Mansor, N. and Man, Z. (2014) Starch biodegradation in a lignin modified slow release fertilizer: Effect of thickness. Applied Mechanics and Materials, 625. pp. 830-833. ISSN 16609336

Mazlan, M.A.F. and Uemura, Y. and Osman, N. and Yusup, S. (2014) Review on pyrolysis of hardwood residue to Biofuel. Applied Mechanics and Materials, 625. pp. 714-717. ISSN 16609336

Murshid, G. and Shariff, A.M. and Bustam, M.A. and Ullah, S. (2014) Solubility of Co2 in piperazine (PZ) activated aqueous solutions of 2- amino-2-methyl-1-propanol (AMP) at elevated pressures. Applied Mechanics and Materials, 625. pp. 233-236. ISSN 16609336

Man, Z. and Sarwono, A. and Bustam, M.A. and Azizli, K.A.M. (2014) Starch based soil conditioner and slow release system. Applied Mechanics and Materials, 625. pp. 877-880. ISSN 16609336

Mushtaq, A. and Mukhtar, H. and Shariff, A.M. (2014) Gas permeability study of amine-polymer blend membranes to separate carbondioxide from natural gas. Applied Mechanics and Materials, 625. pp. 704-708. ISSN 16609336

Mellon, N. and Shariff, A.M. (2014) Effect of superficial gas velocity on the separation efficiency of inline horizontal swirl tube separator. Applied Mechanics and Materials, 625. pp. 566-569. ISSN 16609336

Majid, N.D.A. and Shariff, A.M. and Thiam, E.S.B. (2014) Compliance audit model for managing process safety in process industries. Applied Mechanics and Materials, 625. pp. 406-409. ISSN 16609336

Maszelan, C.N.H.C. and Buang, A. (2014) Monoethanolamine (MEA) wastewater treatment using Photo-Fenton oxidation. Applied Mechanics and Materials, 625. pp. 792-795. ISSN 16609336

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2014) Effects of ionic liquid blending in polymeric membrane: Physical properties and performance evaluation. Applied Mechanics and Materials, 625. pp. 680-684. ISSN 16609336

Maqsood, K. and Ali, A.H. and Shariff, A.B.M. and Ganguly, S. (2014) Techno-economic evaluation of cryogenic networks for separation of CO2 from natural gas. Applied Mechanics and Materials, 625. pp. 635-638. ISSN 16609336

Majid, N.D.A. and Shariff, A.M. and Zaki, N.A.M. (2014) Compliance of hot work permit to process safety management (PSM) regulation. Applied Mechanics and Materials, 625. pp. 418-421. ISSN 16609336

Mushtaq, A. and Mukhtar, H. and Shariff, A.M. (2014) Gas permeability and selectivity of synthesized diethanol amine-polysulfone/polyvinylacetate blend membranes. Research Journal of Applied Sciences, Engineering and Technology, 8 (5). pp. 600-605. ISSN 20407459

Memon, M.A. and Salleh, R. and Rosli Baharom, M.N. and Harun, H. (2014) Factors influencing the satisfaction of international postgraduate students in the Malaysian context-A literature review and a proposed model. International Education Studies, 7 (11). pp. 76-83. ISSN 19139020

Montasir, O.A. and Yenduri, A. and Kurian, V.J. (2014) Effect of mooring line properties and fairlead slopes on the restoring behavior of offshore mooring system. Research Journal of Applied Sciences, Engineering and Technology, 8 (3). pp. 346-353. ISSN 20407459

Magzoub, M.A. and Saad, N.B. and Ibrahim, R.B. (2014) Simulation of a ball on a beam model using a fuzzy-dynamic and a fuzzy-static sliding-mode controller. Research Journal of Applied Sciences, Engineering and Technology, 8 (2). pp. 288-295. ISSN 20407459

Mohammed, B.S. and Azmi, N.J. (2014) Strength reduction factors for structural rubbercrete. Frontiers of Structural and Civil Engineering, 8 (3). pp. 270-281. ISSN 20952430

Mohammed, B.S. and Ibrahim, R.B. and Perumal, N. and Rama Rao, K.S. (2014) Comparison of multi-carriers based PWM for multilevel converters. International Review on Modelling and Simulations, 7 (3). pp. 363-378. ISSN 19749821

Muniandy, M.A.P. and Sulaiman, S. (2014) An exploratory study on blind users' mental model in computer accessibility. ARPN Journal of Engineering and Applied Sciences, 9 (7). pp. 1005-1011. ISSN 18196608

Magzoub, M.A. and Saad, N.B. and Ibrahim, R.B. (2014) Study and analysis of power system stabiliser performance using artificial neural network. Applied Mechanics and Materials, 575. pp. 605-609. ISSN 16609336

Mohd Hashim, F.M. and Ahmad, M.F.A. (2014) Determination of nozzle angle for flow performance in supersonic subsea compact wet gas separator. Advanced Materials Research, 980. pp. 117-121. ISSN 10226680

Mengal, A.N. and Karuppanan, S. and Wahab, A.A. (2014) Basalt carbon hybrid composite for wind turbine rotor blades: A short review. Advanced Materials Research, 970. pp. 67-73. ISSN 10226680

Mohamed, M. and Yusup, S. and Wahyudiono and Machmudah, S. and Goto, M. (2014) Effect of temperature on the extraction of bio-oil from oil palm mesocarp fiber using supercritical CO2. Jurnal Teknologi (Sciences and Engineering), 69 (4). pp. 39-42. ISSN 01279696

Mustaffa, Z.B. and Albarody, T.M.B. (2014) Flexible thermosetting pipe. Advanced Materials Research, 983. pp. 444-449. ISSN 10226680

Mohd Noor, N.I. and Eldemerdash, U.U.M.N. and Shariff, A.M. (2014) Modification of adsorbents for high CO2 content capture from stranded natural gas reserve: A critical review. Advanced Materials Research, 917. pp. 342-349. ISSN 10226680

Mohd Zain, A. and Shaaban, M.G. and Mahmud, H. (2014) Leachability of solidified petroleum sludge. Advanced Materials Research, 917. pp. 123-133. ISSN 10226680

Murshid, G. and Shariff, A.M. and Keong, L.K. and Azmi Busam, M. (2014) Solubility of carbon dioxide in aqueous solutions of Piperazine (PZ) at elevated pressures. Advanced Materials Research, 917. pp. 144-150. ISSN 10226680

Malik, A.S. and Humayun, J. and Kamel, N. and Yap, F.B.-B. (2014) Novel techniques for enhancement and segmentation of acne vulgaris lesions. Skin Research and Technology, 20 (3). pp. 322-331. ISSN 0909752X

Maqsood, K. and Pal, J. and Turunawarasu, D. and Pal, A.J. and Ganguly, S. (2014) Performance enhancement and energy reduction using hybrid cryogenic distillation networks for purification of natural gas with high CO2 content. Korean Journal of Chemical Engineering, 31 (7). pp. 1120-1135. ISSN 02561115

Mohammed, B.S. and Baharun, M.H. and Nuruddin, M.F. and Erikole, O.P.D. and Murshed, N.A. (2014) Mechanical properties of engineered cementitious composites mixture. Applied Mechanics and Materials, 567. pp. 428-433. ISSN 16609336

Maoinser, M.A. and Ahmad, F. and Shariff, S. and Woo, T.K. (2014) Effects of twist drill point angle on thrust force and delamination factor in hybrid fiber composites drilling. Applied Mechanics and Materials, 564. pp. 501-506. ISSN 16609336

Mustaffa, Z. and Albarody, T.M.B. and Roshdi, A.M. (2014) Finite element assessment of difficult pipelines at bends. Applied Mechanics and Materials, 567. pp. 253-258. ISSN 16609336

Mohammed, N.I. and Othman, N. and Baharuddin, K.B. (2014) Air quality profile in an enclosed car park. Applied Mechanics and Materials, 567. pp. 3-7. ISSN 16609336

Muhammad, R.U.M. and Bakar, A.S.A. and Isa, M.H. and Yusof, K.B.W. (2014) Prediction of suspended sediments in a hyper - Concentrated river using neural networks. Applied Mechanics and Materials, 567. pp. 122-127. ISSN 16609336

Matori, A.N. and Lawal, D.U. (2014) Flood disaster forecasting: A GIS-based group analytic hierarchy process approach. Applied Mechanics and Materials, 567. pp. 717-723. ISSN 16609336

Mohd Kamal, N.L. and Beddu, S. and Nuruddin, M.F. and Shafiq, N. and Muda, Z.C. (2014) Microwave incinerated rice husk ash (MIRHA) and used engine oil (UEO): Towards sustainable concrete production. Applied Mechanics and Materials, 567. pp. 434-439. ISSN 16609336

Malakahmad, A. and Chuan, S.Y. and Eisakhani, M. (2014) Post-treatment of anaerobically digested palm oil mill effluent by polymeric flocculant-assisted coagulation. Applied Mechanics and Materials, 567. pp. 116-121. ISSN 16609336

Memon, I.A. and Madzlan, N. and Talpur, M.A.H. and Hakro, M.R. and Chandio, I.A. (2014) A review on the factors influencing the park-and-ride traffic management method. Applied Mechanics and Materials, 567. pp. 663-668. ISSN 16609336

Matori, A.N. and Ab Latip, A.S. and Harahap, I.S.H. and Perissin, D. (2014) Deformation monitoring of offshore platform using the Persistent Scatterer Interferometry technique. Applied Mechanics and Materials, 567. pp. 325-330. ISSN 16609336

Mohammed, B.S. and Alanni, O. (2014) Shear capacity of RC beams with web openings strengthened with multi layers of CFRP. Applied Mechanics and Materials, 567. pp. 494-498. ISSN 16609336

Malakahmad, A. and Abd Manan, T.S. and Hilmin, N. (2014) Biological procedures to detect carcinogenic compounds in domestic wastewater. WIT Transactions on Ecology and the Environment, 182. pp. 345-356. ISSN 17433541

Mustafa, M.R. and Isa, M.H. (2014) Comparative study of MLP and RBF neural networks for estimation of suspended sediments in Pari River, Perak. Research Journal of Applied Sciences, Engineering and Technology, 7 (18). pp. 3837-3841. ISSN 20407459

Malik, M.S.A. and Sulaiman, S. (2014) DBA's perspective on use of information visualization in electronic health records. Research Journal of Applied Sciences, Engineering and Technology, 7 (16). pp. 3320-3331. ISSN 20407459

Memon, M.K. and Tunio, S.Q. and Memon, K.R. and Lashari, A.A. (2014) A comparative study of liquefied natural gas: An overview. Research Journal of Applied Sciences, Engineering and Technology, 7 (17). pp. 3522-3528. ISSN 20407459

Mushtaq, A. and Mukhtar, H. and Shariff, A.M. (2014) Fabrication and characterization of synthesized polysulfone/polyvinylacetate blend membranes. Research Journal of Applied Sciences, Engineering and Technology, 7 (15). pp. 3094-3106. ISSN 20407459

Malik, F. and Baharudin, B. (2014) Effective image retrieval based on an experimental combination of texture features and comparison of different histogram quantizations in the DCT domain. International Arab Journal of Information Technology, 11 (3). pp. 258-267. ISSN 16833198

Mohamed Saheed, M.S. and Mohamed, N.M. and Burhanudin, Z.A. (2014) Effect of different catalyst deposition technique on aligned multiwalled carbon nanotubes grown by thermal chemical vapor deposition. Journal of Nanomaterials, 2014. ISSN 16874110

Mu'Azu, A.A. and Jung, L.T. and Hasbullah, H. and Lawal, I.A. and Shah, P.A. (2014) Guaranteed QoS for UDP and TCP flows to measure throughput in VANETs. Lecture Notes in Electrical Engineering, 279 LN. pp. 1137-1143. ISSN 18761100

Mushtaq, A. and Mukhtar, H.B. and Shariff, A.M. (2014) FTIR study of enhanced polymeric blend membrane with amines. Research Journal of Applied Sciences, Engineering and Technology, 7 (9). pp. 1811-1820. ISSN 20407459

Malakahmad, A. and Lahin, F.A. and Yee, W. (2014) Biodegradation of high-strength palm oil mill effluent (POME) through anaerobes partitioning in an integrated baffled reactor inoculated with anaerobic pond sludge. Water, Air, and Soil Pollution, 225 (3). ISSN 00496979

Mushtaq, A. and Mukhtar, H.B. and Shariff, A.M. (2014) Blending behavior of polysulfone, polyvinyl acetate and amines in dimethyl acetamide solvent. Research Journal of Applied Sciences, Engineering and Technology, 7 (8). pp. 1634-1641. ISSN 20407459

Mokhlif, N.D. and Al-Kayiem, H.H. and Baharom, M.B. (2014) Experimental analysis of petroleum wax characteristics for lubricant oil production in solvent dewaxing unit. Advanced Materials Research, 875-87. pp. 529-533. ISSN 10226680

Mushtaq, M. and Tan, I.M. and Ismail, L. and Lee, S.Y.C. and Nadeem, M. and Sagir, M. (2014) Oleate Ester-Derived Nonionic Surfactants: Synthesis and Cloud Point Behavior Studies. Journal of Dispersion Science and Technology, 35 (3). pp. 322-328. ISSN 01932691

Mushtaq, M. and Tan, I.M. and Ismail, L. and Nadeem, M. and Sagir, M. and Azam, R. and Hashmet, R. (2014) Influence of PZC (Point of Zero Charge) on the Static Adsorption of Anionic Surfactants on a Malaysian Sandstone. Journal of Dispersion Science and Technology, 35 (3). pp. 343-349. ISSN 01932691

Mohammadpour, E. and Awang, M. and Kakooei, S. and Akil, H.M. (2014) Modeling the tensile stress-strain response of carbon nanotube/polypropylene nanocomposites using nonlinear representative volume element. Materials and Design, 58. pp. 36-42. ISSN 02613069

Mei, C.S. and Sufian, S. and Razak, J.A. (2014) Synthesis and characterization of hematite nanoparticles as active photocatalyst for water splitting application. Key Engineering Materials, 594-59. pp. 73-77. ISSN 10139826

Mohammed, B.S. and Cheng, H.T. (2014) Immediate deflection of pretensioned inverted t-beam with circular web openings strengthened with GFRP using response surface methodology. Key Engineering Materials, 594-59. pp. 516-520. ISSN 10139826

Mohshim, D.F. and Mukhtar, H. and Man, Z. (2014) Ionic liquid polymeric membrane: Synthesis, characterization & performance evaluation. Key Engineering Materials, 594-59. pp. 18-23. ISSN 10139826

Mohammed, B.S. and Foo, W.L. and Abdullahi, M. (2014) Flexural strength of palm oil clinker concrete beams. Materials and Design, 53. pp. 325-331. ISSN 02613069

N

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Study of primary atomisation phenomenon of modified starch solution stream at elevated temperature. Materials Research Innovations, 18. S6-135-S6-139. ISSN 14328917

Naz, M.Y. and Sulaiman, S.A. (2014) Surface Morphology and Dissolution Rate of Slow Discharge Urea Coated with Starch-Urea-Borax Matrix. Polymer - Plastics Technology and Engineering, 53 (17). pp. 1778-1787. ISSN 03602559

Narayanan, S.P. and Mathews, M.S. (2014) Roofing sheets systems for industrial sheds in cyclone prone areas based on dynamic testing. Malaysian Construction Research Journal, 14 (1). pp. 63-78. ISSN 19853807

Narayanan, S.P. and Mathews, M.S. (2014) Roofing sheets systems for industrial sheds for different wind zones based on static load testing. Malaysian Construction Research Journal, 14 (1). pp. 79-96. ISSN 19853807

Nizamani, Z. and Kurian, V.J. and Liew, M.S. (2014) Determination of environmental load factors for ISO 19902 code in offshore Malaysia using FORM structural reliability method. Ocean Engineering, 92. pp. 31-43. ISSN 00298018

Nasir, Q. and Lau, K.K. and Lal, B. and Sabil, K.M. (2014) Hydrate dissociation condition measurement of CO2-rich mixed gas in the presence of methanol/ethylene glycol and mixed methanol/ethylene glycol + electrolyte aqueous solution. Journal of Chemical and Engineering Data, 59 (11). pp. 3920-3926. ISSN 00219568

Nawaz, F. and Jeoti, V. (2014) SAW sensor read range limitations and perspectives. Wireless Networks, 20 (8). pp. 2581-2587. ISSN 10220038

Nuruddin, M.F. and Azme, N.M. and Chang, K.Y. (2014) Utilization of microwave incinerated rice husk ash (MIRHA) in ductile self-compacting concrete. WIT Transactions on Ecology and the Environment, 191. pp. 1301-1312. ISSN 17433541

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Visual Characterization of Airless Water Spray Jet Breakup and Vortex Clouds Formation at Elevated Temperature and Pressure. Arabian Journal for Science and Engineering, 39 (10). pp. 7241-7250. ISSN 2193567X

Naz, M.Y. and Sulaiman, S.A. (2014) Testing of starch-based carbohydrate polymer coatings for enhanced urea performance. Journal of Coatings Technology and Research, 11 (5). pp. 747-756. ISSN 15470091

Narahari, M. and Debnath, L. (2014) Some new convolution properties and inversion formulas of Laplace transforms. Integral Transforms and Special Functions, 25 (5). pp. 412-422. ISSN 10652469

Nuruddin, M.F. and Chang, K.Y. and Azmee, N.M. (2014) Workability and compressive strength of ductile self compacting concrete (DSCC) with various cement replacement materials. Construction and Building Materials, 55. pp. 153-157. ISSN 09500618

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Rehman, N.U. (2014) Development of simple designs of multitip probe diagnostic systems for RF plasma characterization. The Scientific World Journal, 2014. ISSN 1537744X

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Shaari, K.Z.K. (2014) Characterization of modified tapioca starch solutions and their sprays for high temperature coating applications. The Scientific World Journal, 2014. ISSN 1537744X

Nordin, N. and Abdul Karim, Z.A. and Othman, S. and Raghavan, V.R. (2014) The performance of turning diffusers at various inlet conditions. Applied Mechanics and Materials, 465-46. pp. 597-602. ISSN 16609336

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Visual study of hollow cone water spray jet breakup process at elevated temperatures and pressures. Applied Mechanics and Materials, 465-46. pp. 485-489. ISSN 16609336

Nordin, N. and Abdul Karim, Z.A. and Othman, S. and Raghavan, V.R. (2014) Verification of fully developed flow entering diffuser and particle image velocimetry procedures. Applied Mechanics and Materials, 465-46. pp. 1352-1356. ISSN 16609336

Nugraheni, R.D. and Chow, W.S. and Abdul Hadi, A.R. and Siti Nuralia, M.N. and Abdullah, M.F. (2014) Tertiary coal-bearing heterolithic packages as low permeability reservoir rocks in the Balingian Sub-basin, Sarawak, Malaysia. Bulletin of the Geological Society of Malaysia, 60. pp. 85-93. ISSN 01266187

Nguyen Van, T.D. and Sufian, S. and Mansor, N. and Yahya, N. (2014) Characterization of carbon nanofibers treated with thermal nitrogen as a catalyst support using point-of-zero charge analysis. Journal of Nanomaterials, 2014. ISSN 16874110

Nasir, R. and Mukhtar, H. and Man, Z. and Bt. Shaharun, M.S. and Abu Bakar, M.Z. (2014) Performance enhancement of mixed matrix membranes through the incorporation of alkanolamines for CO2/CH4 separation. ASEAN Journal of Chemical Engineering, 14 (2). pp. 28-37. ISSN 16554418

Niaz Akhtar, M. and Nasir, N. and Kashif, M. and Yahya, N. and Ahmad, M. and Murtaza, G. and Azhar Khan, M. and Asif, M.H. and Sattar, A. and Raza, R. and Saleem, M. and Khan, S.N. (2014) Mn0.8Zn0.2Fe2O4 nanoparticulates spinel ferrites: An approach to enhance the antenna field strength for improved magnitude versus offset (MVO). Progress in Natural Science: Materials International, 24 (4). pp. 364-372. ISSN 10020071

Naqvi, S.R. and Uemura, Y. and Osman, N.B. and Yusup, S. and Nuruddin, M.F. (2014) Physiochemical properties of pyrolysis oil derived from fast pyrolysis of wet and dried rice husk in a free fall reactor. Applied Mechanics and Materials, 625. pp. 604-607. ISSN 16609336

Nasir, Q. and Sabil, K.M. and Partoon, B. (2014) CO2 rich gas mixture hydrate-liquid water- vapor (H-Lw-V) equilibrium measurement and prediction. Applied Mechanics and Materials, 625. pp. 386-389. ISSN 16609336

Nguyen Van, T.D. and Sufian, S. and Mansor, N. and Yahya, N. (2014) Effect of modification techniques on surface of carbon nanofiber as catalyst support. Applied Mechanics and Materials, 625. pp. 345-348. ISSN 16609336

Nadeem, S. and Ahmed, I. and Abdul Muttalib, I. and Tufail, M. and Khan, M.S. (2014) Citric acid future prospects for Pakistan, a short review. Applied Mechanics and Materials, 625. pp. 61-64. ISSN 16609336

Nasir, R. and Mukhtar, H. and Man, Z. (2014) Fabrication and characterization of facilitated transport membrane for gas separation. Applied Mechanics and Materials, 625. pp. 533-536. ISSN 16609336

Nashed, O. and Sabil, K.M. and Lal, B. and Ismail, L. and Jaafar, A.J. (2014) Study of 1-(2-hydroxyethyle) 3-methylimidazolium halide as thermodynamic inhibitors. Applied Mechanics and Materials, 625. pp. 337-340. ISSN 16609336

Norizan, A. and Uemura, Y. and Afif, H.A. and Osman, N. and Omar, W.N. and Abdullah, B. and Tsutsui, T. (2014) Fast pyrolysis of oil palm kernel shell in a fluidized bed reactor: The effect of pyrolysis temperature on the yields of pyrolysis products. Applied Mechanics and Materials, 625. pp. 616-619. ISSN 16609336

Ng, W.P.Q. and Lam, H.L. and Yusup, S. (2014) Waste-to-wealth: Energy pack as an integrated biofuel. Chemical Engineering Transactions, 39 (Specia). pp. 925-930. ISSN 22839216

Noor, N.D.M. and Hashim, A.M. (2014) Hydraulic stability of interlocking concrete unit-V (ICU-V). Applied Mechanics and Materials, 606. pp. 211-215. ISSN 16609336

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Shakir, I. and Ullah, S. and Sagir, M. (2014) Testing of nickel-chrome alloy as a tip material for multi-tip langmuir probes. Surface Review and Letters, 21 (4). ISSN 0218625X

Norizan, A. and Uemura, Y. and Wissam, N.O. and Tsutsui, T. (2014) Bio-oil derived from palm kernel shell in fluidized bed reactor: Effect of particle size. Advanced Materials Research, 917. pp. 63-71. ISSN 10226680

Namazi-Saleh, F. and Kurian, V.J. and Mustaffa, Z. (2014) Investigation of vortex induced vibration of offshore pipelines near seabed. Applied Mechanics and Materials, 567. pp. 265-270. ISSN 16609336

Nuruddin, M.F. and Chang, K.Y. and Azmee, N.M. (2014) The effect of MIRHA and fly ash on mechanical strength and chloride penetration depth of DSCC. Applied Mechanics and Materials, 567. pp. 522-528. ISSN 16609336

Nahi, M.H. and Kamaruddin, I.B. and Madzlan, N. (2014) The utilization of rice husks powder as an antioxidant in asphalt binder. Applied Mechanics and Materials, 567. pp. 539-544. ISSN 16609336

Nuruddin, M.F. and Siti Nooriza, A.R. (2014) Effects of geopolymer concrete fly ash based on Alkali Silica Reaction (ASR). Applied Mechanics and Materials, 567. pp. 405-410. ISSN 16609336

Nuruddin, M.F. and Azmee, N.M. and Chang, K.Y. (2014) Effect of MIRHA and fly ash in ductile self-compacting concrete on abrasion and impact performance. Applied Mechanics and Materials, 567. pp. 393-398. ISSN 16609336

Nuruddin, M.F. and Puad, N.H.A. and Azizli, K.A.M. and Farhan, S.A. and Zainal, A. (2014) Prospect of adopting kapok fibre as roof insulation. Applied Mechanics and Materials, 567. pp. 482-487. ISSN 16609336

Nuruddin, M.F. and Memon, F.A. and Shafiq, N. and Demie, S. (2014) Drying shrinkage of fly ash-based self-compacting geopolymer concrete. Applied Mechanics and Materials, 567. pp. 362-368. ISSN 16609336

Ng, C.Y. and Kurian, J.V. and Liew, M.S. (2014) Dynamic responses of classic spar platform: Short crested waves vs. long crested waves. Applied Mechanics and Materials, 567. pp. 235-240. ISSN 16609336

Nuruddin, M.F. and Khan, S.U. and Shafiq, N. (2014) Effect of calcined kaolin on the mechanical properties of high-strength concrete as cement replacing material. Applied Mechanics and Materials, 567. pp. 375-380. ISSN 16609336

Nguyen Van, T.D. and Sufian, S. and Mansor, N. and Yahya, N. (2014) Effect of modification techniques on supported catalyst preparation by incipient wetness impregnation. American-Eurasian Journal of Sustainable Agriculture, 8 (4 SPEC). pp. 135-140. ISSN 19950748

Ng, W.P.Q. and Lim, M.T. and Bt Mohamad Izhar, S.M. and Lam, H.L. and Yusup, S. (2014) Overview on economics and technology development of rubber seed utilisation in Southeast Asia. Clean Technologies and Environmental Policy, 16 (3). pp. 439-453. ISSN 1618954X

Narayanasamy, L. and Murugesan, T. (2014) Degradation of Alizarin Yellow R using UV/H2O2 advanced oxidation process. Environmental Progress and Sustainable Energy, 33 (2). pp. 482-489. ISSN 19447442

Nuruddin, M.F. and Khan, S.U. and Shafiq, N. and Ayub, T. (2014) Strength development of high-strength ductile concrete incorporating Metakaolin and PVA fibers. The Scientific World Journal, 2014. ISSN 1537744X

Naqvi, S.R. and Uemura, Y. and Yusup, S.B. (2014) Catalytic pyrolysis of paddy husk in a drop type pyrolyzer for bio-oil production: The role of temperature and catalyst. Journal of Analytical and Applied Pyrolysis, 106. pp. 57-62. ISSN 01652370

Nurika, O. and Paputungan, I.V. and Hassan, M.F. (2014) Performance oriented genetic algorithm framework of concurrent SLA negotiations in cloud. World Applied Sciences Journal, 30 (30 A). pp. 280-287. ISSN 18184952

Nuruddin, Muhd.F. and Yung, C.K. and Azmee, N.M. and Shafiq, N. (2014) A review on ductile self compacting concrete. Key Engineering Materials, 594-59. pp. 433-438. ISSN 10139826

Nuruddin, M.F. and Azmee, N.M. and Yung, C.K. (2014) Effect of fire flame exposure on ductile self-compacting concrete (DSCC) blended with MIRHA and fly ash. Construction and Building Materials, 50. pp. 388-393. ISSN 09500618

O

Owolabi, A.L. and Al-Kayiem, H.H. and Baheta, A.T. and Lin, S.C. (2014) Experimental investigation of thermal conductivity of paraffin based nanocomposite for TES. Applied Mechanics and Materials, 465-46. pp. 181-185. ISSN 16609336

Osman, S.B.S. and Fikri, M.N. and Siddique, F.I. (2014) Correlation of electrical resistivity with some soil parameters for the development of possible prediction of slope stability and bearing capacity of soil using electrical parameters. Pertanika Journal of Science and Technology, 22 (1). pp. 139-152. ISSN 01287680

Ousta, F. and Kamel, N. and Yusoff, M.Z. and Ali, S. (2014) Mapping QoS classes in loose coupling heterogeneous networks. Research Journal of Applied Sciences, Engineering and Technology, 8 (16). pp. 1777-1780. ISSN 20407459

Osman, N.B. and Uemura, Y. and Afif, H. and Aljuboori, A.H.R. (2014) Pyrolyzed waste engine oil properties by microwave-induced reactor. Applied Mechanics and Materials, 625. pp. 673-676. ISSN 16609336

Ousta, F. and Yusoff, M.Z. and Kamel, N. and Ali, S. (2014) QoS evolution in 3GPP mobile networks. Research Journal of Applied Sciences, Engineering and Technology, 8 (2). pp. 153-159. ISSN 20407459

Oh, P.C. and Mansur, N.A. (2014) Effects of aluminosilicate mineral nano-clay fillers on polysulfone mixed matrix membrane for carbon dioxide removal. Jurnal Teknologi (Sciences and Engineering), 69 (9). pp. 23-27. ISSN 01279696

Orji, K.U. and Sapari, N.B. and Yusof, K.W. and Robabeh, A. and Olisa, E. (2014) Water quality assessment of ex-mining lakes in Perak, Malaysia as alternative source of water supply. Applied Mechanics and Materials, 567. pp. 177-182. ISSN 16609336

Othman, I. and Napiah, M. and Potty, N.S. (2014) Resource management in construction project. Applied Mechanics and Materials, 567. pp. 607-612. ISSN 16609336

Osman, M. and Bin Hassan, S. and Yusof, K.B.W. (2014) Effect of low pressure on irrigation uniformity of solid set sprinkler irrigation system. Applied Mechanics and Materials, 567. pp. 26-31. ISSN 16609336

Osman, S.B.S. and Iqbal, F. (2014) Possible stabilization of sludge from groundwater treatment plant using electrokinetic method. Applied Mechanics and Materials, 567. pp. 110-115. ISSN 16609336

Oh, P.C. and Mansur, N.A. (2014) Synthesis and characterization of polysulfone/montmorillonite (PSF/MMT) mixed matrix membrane for gas separation. Advanced Materials Research, 925. pp. 18-22. ISSN 10226680

Oumer, A.N. and Mamat, O. (2014) Numerical modelling of non-isothermal flow of fibre suspensions: Prediction of fibre orientation in three-dimensional cavities. International Journal of Computational Science and Engineering, 9 (3). pp. 247-256. ISSN 17427185

Osman, N.B. and Ping, M.K.H. and Yoshimitsu, U. and An, N.B. (2014) Properties of Malaysia bamboo's (gigantochloa scortechinii) pyrolyzed products via drop type pyrolyzer reactor: Bio-oil. Chemical Engineering Transactions, 37. pp. 133-138. ISSN 22839216

P

Pubellier, M. and Morley, C.K. (2014) The basins of Sundaland (SE Asia): Evolution and boundary conditions. Marine and Petroleum Geology, 58 (PB). pp. 555-578. ISSN 02648172

Pichot, T. and Delescluse, M. and Chamot-Rooke, N. and Pubellier, M. and Qiu, Y. and Meresse, F. and Sun, G. and Savva, D. and Wong, K.P. and Watremez, L. and Auxiètre, J.-L. (2014) Deep crustal structure of the conjugate margins of the SW South China Sea from wide-angle refraction seismic data. Marine and Petroleum Geology, 58 (PB). pp. 627-643. ISSN 02648172

Park, D.K. and Paik, J.K. and Kim, B.J. and Seo, J.K. and Li, C.G. and Kim, D.K. (2014) Ultimate strength performance of Northern sea going non-ice class commercial ships. Structural Engineering and Mechanics, 52 (3). pp. 613-632. ISSN 12254568

Paul, T. and Seal, M. and Banerjee, D. and Ganguly, S. and Kargupta, K. and Sandilya, P. (2014) Analysis of drying and dilution in phosphoric acid fuel cell (PAFC) using galvanometric study and electrochemical impedance spectroscopy. Journal of Fuel Cell Science and Technology, 11 (4). ISSN 1550624X

Pau, J.S. and Pao, W.K.S. and Yong, S.P. and Memon, P.Q. (2014) Capillary pressure and buoyancy effects in the CO2/brine flow system. WIT Transactions on Ecology and the Environment, 186. pp. 613-624. ISSN 17433541

Peyvandi, S. and Ahmad, R. and Nordin Zakaria, M. (2014) Scoring model for availability of volatile hosts in volunteer computing environment. Journal of Theoretical and Applied Information Technology, 70 (2). pp. 293-301. ISSN 19928645

Pauzi, A.H. and Ismail, L. and Siyal, A.A. and Man, Z. and Azizli, K.A. (2014) Experimental study of geopolymer solidification kinetics. Applied Mechanics and Materials, 625. pp. 127-130. ISSN 16609336

Partoon, B. and Sabil, K.M. and Kok Keong, L. (2014) Impact of gas phase composition on gas hydrate process for carbon dioxide capturing from gaseous mixtures. Applied Mechanics and Materials, 625. pp. 557-561. ISSN 16609336

Prabaningrum, N. and Bin Ismail, L. and Subbarao, D. (2014) Reaction kinetics of in-situ methanolysis of Jatropha curcas seeds. Applied Mechanics and Materials, 625. pp. 306-310. ISSN 16609336

Pham, H.H.P.L. and Rusli, R. and Abdullah, M.Z. (2014) Consequence study of pressurized CO2 release containing impurities with obstacles. Applied Mechanics and Materials, 625. pp. 474-477. ISSN 16609336

Ponnusamy, V. and Low, T.J. and Amin, A.H.M. (2014) Biologically inspired mobile agent-based sensor network (BIMAS). International Journal of Mobile Communications, 12 (5). pp. 449-476. ISSN 1470949X

Prabaningrum, N. and Ismail, L.B. and Subbarao, D. (2014) In-situ methanolysis of Jatropha curcas seeds in Soxhlet extractor. Advanced Materials Research, 917. pp. 72-79. ISSN 10226680

Potty, N.S. and Hamid, M.R.A. (2014) Evaluation of multi storey structures in Malaysia. Applied Mechanics and Materials, 567. pp. 571-576. ISSN 16609336

Palaniandy, D.K. and Syed, Z.I. and Liew, M.S. and Karuppanan, S. (2014) Broadside vessel collision forces for conventional riser-guard. Applied Mechanics and Materials, 567. pp. 210-215. ISSN 16609336

Patil, S.S. and Karuppanan, S. and Atanasovska, I. and Wahab, A.A. (2014) Contact stress analysis of helical gear pairs, including frictional coefficients. International Journal of Mechanical Sciences, 85. pp. 205-211. ISSN 00207403

Pervaiz, M. and Yousaf, M. and Sagir, M. and Naz, M.Y. and Mushtaq, M. and Ullah, S. and Chatha, S.A.S. (2014) Novel preparation and spectral investigation of monometallic transition metal Schiff base complexes (Zn, Cu, Mn, Co) as bacteria and fungus inhibitors. Main Group Chemistry, 13 (2). pp. 129-145. ISSN 10241221

Pao, W. and Hashim, F.M. (2014) Numerical coupling of drilling vibration to riser's oscillation. Applied Mechanics and Materials, 548-54. pp. 1893-1897. ISSN 16609336

Potty, N.S. and Vallyutham, K. and Yusoff, M.F. and Anwar, A. and Haron, M.F. and Alias, M.N. (2014) Properties of rice husk Ash (RHA and MIRHA) mortars. Research Journal of Applied Sciences, Engineering and Technology, 7 (18). pp. 3872-3882. ISSN 20407459

Phuoc Phat Dat Le, D. and Tran, D.N. and Hussin, F.A. and Yusoff, M.Z. (2014) Acceleration of retinex algorithm for image processing on android device using renderscript. Lecture Notes in Electrical Engineering, 291 LN. pp. 137-144. ISSN 18761100

Permana, K.D. and Shuib, A.S. and Ariwahjoedi, B. (2014) A review of magnesium alloys for use in biodegradable cardiovascular stents. World Applied Sciences Journal, 30 (30 A). pp. 375-381. ISSN 18184952

Perumalsamy, M. and Murugesan, T. (2014) Liquid-liquid equilibrium of aqueous two-phase system (PEG 2000-Sodium Citrate-Water) using potential difference as a key tool. Physics and Chemistry of Liquids, 52 (1). pp. 26-36. ISSN 00319104

Q

Qadrouh, A.N. and Carcione, J.M. and Botelho, M.A.B. and Harith, Z.Z.T. and Salim, A.M. (2014) On optimal NMO and generalised Dix equations for velocity determination and depth conversion. Journal of Applied Geophysics, 101. pp. 136-141. ISSN 09269851

Qasim, A. and Zamri Abdullah, M. and Lau, K.K. and Adilla, N. (2014) Flow dynamics investigation of CO2/CH4 gas mixture through porous media using computational approach. Applied Mechanics and Materials, 625. pp. 369-372. ISSN 16609336

Qasim, S. and Harahap, I.S.H. and Baharom, S. and Imran, M. (2014) Human error causes in slope engineering practices. Applied Mechanics and Materials, 567. pp. 730-735. ISSN 16609336

Qayyum, A. and Shoaib, M. and Matouk, A.E. and Latif, M.A. (2014) On new generalized ostrowski type integral inequalities. Abstract and Applied Analysis, 2014. ISSN 10853375

Qayyum, A. and Shoaib, M. and Latif, M.A. (2014) A generalized inequality of Ostrowski type for twice differentiable bounded mappings and applications. Applied Mathematical Sciences (37-40). pp. 1889-1901. ISSN 1312885X

R

Rahmam, S. and Mohamed, N.M. and Sufian, S. (2014) Effect of acid treatment on the multiwalled carbon nanotubes. Materials Research Innovations, 18. S6-196-S6-199. ISSN 14328917

Rashid, U. and Ahmad, J. and Yunus, R. and Ibrahim, M. and Masood, H. and Syam, A.M. (2014) Momordica Charantia seed oil methyl esters: A kinetic study and fuel properties. International Journal of Green Energy, 11 (7). pp. 727-740. ISSN 15435075

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered film journal bearing with partial slip surface. Advanced Materials Research, 903. pp. 215-220. ISSN 10226680

Ramli, A. and Ahmed, S. and Yusup, S. (2014) Effect of monoethanolamine loading on the physicochemical properties of amine-functionalized Si-MCM-41. Sains Malaysiana, 43 (2). pp. 253-259. ISSN 01266039

Rizlan, Z. and Mamat, O. (2014) Mechanical milling of Tronoh silica sand nanoparticles using low speed ball milling process. Applied Mechanics and Materials, 465-46. pp. 998-1002. ISSN 16609336

Ramli, R.M. and Chong, F.K. and Omar, A.A. (2014) Visible-light photodegradation of diisopropanolamine using bimetallic Cu-Fe/TiO2 photocatalyst. Advanced Materials Research, 845. pp. 421-425. ISSN 10226680

Rashidi, N.A. and Yusup, S. and Borhan, A. and Loong, L.H. (2014) Experimental and modelling studies of carbon dioxide adsorption by porous biomass derived activated carbon. Clean Technologies and Environmental Policy, 16 (7). pp. 1353-1361. ISSN 1618954X

Riahi, A. and Yusof, K.W. and Isa, M.H. and Mahinder Singh, B.S. and Sapari, N. (2014) Solar stills productivity with different arrangements of PV-DC heater and sand layer in still basin: A comparative investigation. Research Journal of Applied Sciences, Engineering and Technology, 8 (11). pp. 1363-1372. ISSN 20407459

Rahman, S.A. and Syed, Z.I. and John, K.V. and Liew, M.S. (2014) Structural response of offshore blast walls under accidental explosion. Advanced Materials Research, 1043. pp. 278-282. ISSN 10226680

Rahman, I. and Vasant, P.M. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2014) Optimisation of PHEV/EV charging infrastructures: A review. International Journal of Energy Technology and Policy, 10 (3-4). pp. 280-296. ISSN 14728923

Rashid, T. and Kait, C.F. and Murugesan, T. (2014) Conversion of lignocellulose into fermentable sugars using solid acid catalysis � A review. Applied Mechanics and Materials, 625. pp. 341-344. ISSN 16609336

Rahim, M. and Ramasamy, M. and Tufa, L.D. and Faisal, A. (2014) Isolation of interacting channels in decentralized control systems using instrumental variables method. Applied Mechanics and Materials, 625. pp. 435-438. ISSN 16609336

Ramli, N.K. and Majeed, Z. and Shuib, A.S. and Mansor, N. and Man, Z. (2014) The potential of thiosulfinates in garlic extract as urease Bioinhibitor. Applied Mechanics and Materials, 625. pp. 796-799. ISSN 16609336

Richard, B. and Bustam, M.A. and Gonfa, G. (2014) Separation of benzene and cyclohexane with mixed solvent using extractive distillation. Applied Mechanics and Materials, 625. pp. 578-581. ISSN 16609336

Rahman, A.H.A. and Abdullah, B. and Vo, D.-V.N. (2014) Modelling of carbon dioxide leakage in abandon wells using computational fluid dynamics. Applied Mechanics and Materials, 625. pp. 780-783. ISSN 16609336

Riaz, N. and Bustam, M.A. and Kait, C.F. and Man, Z.B. and Khan, M.S. and Shariff, A.M. and Shimekit, B. and Ullah, S. and Elkhalifah, A.E.I. (2014) Adsorption of AZO dye orange II by supported TiO2: A review. Applied Mechanics and Materials, 625. pp. 770-774. ISSN 16609336

Rahmah, A.U. and Harimurti, S. and Omar, A.A. and Murugesan, T. (2014) Degradation kinetic of oxytetracycline antibiotic inside uv reactor in the presence of H2O2. Applied Mechanics and Materials, 625. pp. 901-906. ISSN 16609336

Ramli, R.M. and Kait, C.F. and Omar, A.A. (2014) Photodegradation of aqueous diisopropanolamine using Cu/TiO2: Effect of calcination temperature and duration. Applied Mechanics and Materials, 625. pp. 847-850. ISSN 16609336

Romeli, F.J. and Wilfred, C.D. and Suhaila Shuib, A. (2014) Thermodynamic properties of flufenamic ionic liquids. Applied Mechanics and Materials, 625. pp. 586-591. ISSN 16609336

Rahmiati, T. and Azizli, K.A. and Man, Z. and Ismail, L. and Nuruddin, M.F. (2014) The effect of KOH concentration on setting time and compressive strength of fly ash-based geopolymer. Applied Mechanics and Materials, 625. pp. 94-97. ISSN 16609336

Ramli, A. and Ahmed, S. and Yusup, S. (2014) Adsorption behaviour of Si-MCM-41 for CO2: Effect of pressure and temperature on adsorption. Chemical Engineering Transactions, 39 (Specia). pp. 271-276. ISSN 22839216

Ratnam, K.A. and Dominic, P.D.D. (2014) The factors associating the adoption of cloud computing: An enhancement of the healthcare ecosystem in Malaysia. International Journal of Business Information Systems, 16 (4). pp. 462-479. ISSN 17460972

Riaz, N. and Bustam, M.A. and Chong, F.K. and Man, Z.B. and Khan, M.S. and Shariff, A.M. (2014) Photocatalytic degradation of DIPA using bimetallic cu-ni/tio2 photocatalyst under visible light irradiation. Scientific World Journal, 2014. ISSN 23566140

Rudra Narsimha Rao, G. and Nand Gopal, E. and Sharma, K.V. (2014) Cost effective solution for energy efficiency in urban water supplies: Developing countries. International Journal of Applied Engineering Research, 9 (18). pp. 4667-4682. ISSN 09734562

Ramli, N.K. and Majeed, Z. and Shuib, A.S. and Mansor, N. and Man, Z.B. (2014) The potential of quercetin in Psidium Guajava L. leaves extract as bioinhibitor for controlled released fertilizer. Advanced Materials Research, 970. pp. 16-19. ISSN 10226680

Rafiq, S. and Maulud, A.S. and Man, Z.B. and Muhammad, N. (2014) Gas permeation models in mixed matrix membranes for gas separation. Advanced Materials Research, 917. pp. 317-324. ISSN 10226680

Riaz, N. and Chong, F.K. and Man, Z.B. and Dutta, B.K. and Ramli, R.M. and Khan, M.S. (2014) Visible light photodegradation of azo dye by Cu/TiO2. Advanced Materials Research, 917. pp. 151-159. ISSN 10226680

Ramli, R.M. and Kait, C.F. and Omar, A.A. (2014) Photocatalytic degradation of diisopropanolamine in heterogeneous photo-fenton system. Advanced Materials Research, 917. pp. 160-167. ISSN 10226680

Rahamnian, N. and Homayoonfard, M. (2014) A comparison of co-current and counter-current modes of operation in urea prilling tower. Advanced Materials Research, 917. pp. 199-208. ISSN 10226680

Ratnam, K.A. and Dominic, P.D.D. and Ramayah, T. (2014) A structural equation modeling approach for the adoption of cloud computing to enhance the Malaysian healthcare sector systems-level quality improvement. Journal of Medical Systems, 38 (8). ISSN 01485598

Ramasamy, M. and Deshannavar, U.B. (2014) Effect of bulk temperature and heating regime on crude oil fouling: An analysis. Advanced Materials Research, 917. pp. 189-198. ISSN 10226680

Roslim, M.K. and Hassan, S. and Izzati, K. (2014) Experimental and simulation study on the effects of twisted coil plates on the performance of fire tube boiler. Applied Mechanics and Materials, 564. pp. 234-239. ISSN 16609336

Riahi, A. and Yusof, K.W. and Isa, M.H. and Singh, B.S.M. and Malakahmad, A. and Sapari, N.B. (2014) Experimental investigation on the performance of four types of solar stills in Malaysia. Applied Mechanics and Materials, 567. pp. 56-61. ISSN 16609336

Rahim, A.F.A. and Kutty, S.R.M. and Ezechi, E.H. (2014) Volatile fatty acids production through degradation of biomass by anaerobic digestion (Mesophilic and Thermophilic). Applied Mechanics and Materials, 567. pp. 172-176. ISSN 16609336

Rahim, A.F.A. and Kutty, S.R.M. and Malakahmad, A. (2014) Optimization of anaerobic digestion of sludge to produce volatile fatty acids. WIT Transactions on Ecology and the Environment, 181. pp. 237-244. ISSN 17433541

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2014) Prediction Equation for Permeability of Class G Oilwell Cement Under Reservoir Conditions. Arabian Journal for Science and Engineering, 39 (6). pp. 5219-5228. ISSN 2193567X

Ramli, A. and Misi, S.E.E. and Mohamad, M.F. and Yusup, S. (2014) Bimetallic Fe-Ni/Zeolite β catalysts for hydrogen generation from steam gasification of palm kernel shell. Advanced Materials Research, 925. pp. 313-317. ISSN 10226680

Rahmam, S. and Mohamed, N.M. and Sufian, S. (2014) Characterization of modified multiwalled carbon nanotubes. Advanced Materials Research, 925. pp. 369-373. ISSN 10226680

Ramli, R.M. and Kait, C.F. and Omar, A.A. (2014) Visible light photodegradation of diisopropanolamine using Cu/TiO2 photocatalyst: Effect of metal loading. Advanced Materials Research, 925. pp. 273-277. ISSN 10226680

Riaz, N. and Bustam, M.A. and Shariff, A.M. (2014) Iron doped TiO2 photocatalysts for environmental applications: Fundamentals and progress. Advanced Materials Research, 925. pp. 689-693. ISSN 10226680

Rao, T.V.V.L.N. and Sufian, S. and Mohamed, N.M. (2014) Analysis of electric double layer on thin film lubrication with partial slip. Advanced Materials Research, 925. pp. 538-542. ISSN 10226680

Rusli, R. and Chang, E.J.T. and Pham, H.H.P.L. and Shariff, A.M. (2014) Solid carbon dioxide formation from rapid fluid expansion using integration of computational fluid dynamics and mathematical modelling. Chemical Engineering Transactions, 36. pp. 607-612. ISSN 22839216

Ramasamy, R. and Tuan Ya, T.M.Y.S. (2014) Nonlinear finite element analysis of collapse and post-collapse behaviour in dented submarine pipelines. Applied Ocean Research, 46. pp. 116-123. ISSN 01411187

Ramli, A. and Farooq, M. and Mohamad, M.F. (2014) Mo/γ-Al2O3-MgO as a bifunctional catalyst for renewable hydrogen production from steam reforming of glycerol. Advanced Materials Research, 875-87. pp. 1534-1538. ISSN 10226680

Ramli, A. and Ahmad, I.A. (2014) Performance of TiO2 nanoparticles synthesized at pH 2 as photoelectrode in dye solar cell. Advanced Materials Research, 875-87. pp. 77-81. ISSN 10226680

Rizvi, S. and Saad, N.M. (2014) SSVHOP: A simple and seamless vertical handoff protocol for loosely coupled integrated UMTS/WLAN network. Research Journal of Applied Sciences, Engineering and Technology, 7 (6). pp. 1082-1092. ISSN 20407459

Rashidi, N.A. and Yusup, S. and Borhan, A. (2014) Novel low-cost activated carbon from coconut shell and its adsorptive characteristics for carbon dioxide. Key Engineering Materials, 594-59. pp. 240-244. ISSN 10139826

Rehman, M. and Mahmood, A.K. and Salleh, R. and Amin, A. (2014) Framework to increase knowledge sharing behavior among software engineers. Research Journal of Applied Sciences, Engineering and Technology, 7 (4). pp. 849-856. ISSN 20407459

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of couple stress fluid lubricated partially textured slip slider and journal bearing using narrow groove theory. Tribology International, 69. pp. 1-9. ISSN 0301679X

S

Savva, D. and Pubellier, M. and Franke, D. and Chamot-Rooke, N. and Meresse, F. and Steuer, S. and Auxietre, J.L. (2014) Different expressions of rifting on the South China Sea margins. Marine and Petroleum Geology, 58 (PB). pp. 579-598. ISSN 02648172

Sabil, K.M. and Nasir, Q. and Partoon, B. and Seman, A.A. (2014) Measurement of H-LW-V and dissociation enthalpy of carbon dioxide rich synthetic natural gas mixtures. Journal of Chemical and Engineering Data, 59 (11). pp. 3502-3509. ISSN 00219568

Sundaramoorthy, S. and Ramasamy, M. (2014) Tuning optimal proportional-integral-derivative controllers for desired closed-loop response using the method of moments. Industrial and Engineering Chemistry Research, 53 (44). pp. 17403-17418. ISSN 08885885

Sarkar, A.Kr. and Saha, S. and Ganguly, S. and Banerjee, D. and Kargupta, K. (2014) Hydrogen storage on graphene using Benkeser reaction. International Journal of Energy Research, 38 (14). pp. 1889-1895. ISSN 0363907X

Shahzad, A. and Saad, M.N. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2014) Hyperspectral venous image quality assessment for optimum illumination range selection based on skin tone characteristics. BioMedical Engineering Online, 13 (1). ISSN 1475925X

Saha, S. and Basak, V. and Dasgupta, A. and Ganguly, S. and Banerjee, D. and Kargupta, K. (2014) Graphene supported bimetallic G-Co-Pt nanohybrid catalyst for enhanced and cost effective hydrogen generation. International Journal of Hydrogen Energy, 39 (22). pp. 11566-11577. ISSN 03603199

Steele, G.S. and Khalid Ali, K. (2014) Excellence in Malaysian universities: Senior academics in public and private institutions discuss this notion. Pertanika Journal of Social Sciences and Humanities, 22 (2). pp. 665-679. ISSN 01287702

Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2014) Breakdown voltage reduction by field emission in multi-walled carbon nanotubes based ionization gas sensor. Applied Physics Letters, 104 (12). ISSN 00036951

Sajid, M. and Ghosh, D. (2014) A fast and simple method of spectral enhancement. Geophysics, 79 (3). pp. 75-80. ISSN 00168033

Shah, S.M.U. and Che Radziah, C. and Ibrahim, S. and Latiff, F. and Othman, M.F. and Abdullah, M.A. (2014) Effects of photoperiod, salinity and pH on cell growth and lipid content of Pavlova lutheri. Annals of Microbiology, 64 (1). pp. 157-164. ISSN 15904261

Sajid, M. and Ghosh, D.P. and Satti, I.A. (2014) Comparative study of new signal processing to improve S/N ratio of seismic data. Journal of Petroleum Exploration and Production Technology, 4 (1). pp. 87-96. ISSN 21900558

Shaikh, M.S. and Shariff, A.M. and Bustam, M.A. and Murshid, G. (2014) Physicochemical properties of aqueous solutions of sodium l -prolinate as an absorbent for CO2 removal. Journal of Chemical and Engineering Data, 59 (2). pp. 362-368. ISSN 00219568

Sasthiryar, S. and Abdul Khalil, H.P.S. and Bhat, A.H. and Ahmad, Z.A. and Islam, M.N. and Zaidon, A. and Dungani, R. (2014) Nanobioceramic composites: A study of mechanical, morphological, and thermal properties. BioResources, 9 (1). pp. 861-871. ISSN 19302126

Sujan, D. and Piaw, T.K. and Woldemichael, D.E. (2014) Thermo-mechanical stress analysis in electronic packaging with continuous and partial bond layer. Applied Mechanics and Materials, 465-46. pp. 50-54. ISSN 16609336

Shobowale, K.O. and Hashim, F.M. (2014) Current trend in the oil and gas industry on subsea processing equipment. Applied Mechanics and Materials, 465-46. pp. 1357-1360. ISSN 16609336

Seri, S.M. and Abdul Karim, Z.A. and Batcha, M.F.M. and Raghavan, V.R. (2014) Tube bank with integral wake splitter performance at Reynolds number 5000 to 50000. Applied Mechanics and Materials, 465-46. pp. 546-551. ISSN 16609336

Sadig, H. and Sulaiman, S.A. and Ibrahim, I. (2014) Exergy analysis of a micro-gas turbine fueled with syngas. Applied Mechanics and Materials, 465-46. pp. 142-148. ISSN 16609336

Setyamartana, P. and Razali, R. and Zainuddin, A. (2014) Spin-off maneuvers of flexible satellite using PD based constant - Amplitude inputs. Applied Mechanics and Materials, 465-46. pp. 337-344. ISSN 16609336

Sing, C.Y. and Aris, M.S. (2014) The effect of mixing coal with biomass in solid fuel briquettes. Advanced Materials Research, 856. pp. 338-342. ISSN 10226680

Soleimani, H. and Yahya, N. and Latiff, N.R.A. and Koziol, K. and Maciejewska, B.M. and Guan, B.H. (2014) Synthesis and characterization of mesoporous multi-walled carbon nanotubes at low frequencies electromagnetic waves. Journal of Nano Research, 26. pp. 117-122. ISSN 16625250

Soleimani, H. and Yahya, N. and Latiff, N.R.A. and Zaid, H.M. and Demiral, B. and Amighian, J. (2014) Novel enhanced oil recovery method using Co2+xFe 2+1-xFe3+2O4 as magnetic nanoparticles activated by electromagnetic waves. Journal of Nano Research, 26. pp. 111-116. ISSN 16625250

Shafie, A. and Yahya, N. and Kashif, M. and Zaid, H.M. and Solemani, H. and Alnarabiji, M.S. (2014) The band structures of single-walled carbon nanotubes and ZnO nanoparticles used for oil recovery in water flooding system. Journal of Nano Research, 26. pp. 101-110. ISSN 16625250

Shuaibu, A.N. and Faye, I. and Malik, A.S. and Simsim, M.T. (2014) Collision avoidance path for pedestrian agent performing tawaf. Lecture Notes in Electrical Engineering, 285 LN. pp. 361-368. ISSN 18761100

Sohail, A. and Dominic, D.D. (2014) A unified framework for business process intelligence. Lecture Notes in Electrical Engineering, 285 LN. pp. 437-444. ISSN 18761100

Shakir, M. and Malik, A.S. and Kamel, N. and Qidwai, U. (2014) Embedded wearable EEG seizure detection in ambulatory state. International Journal of Simulation: Systems, Science and Technology, 15 (3). pp. 1-6. ISSN 14738031

Sulaiman, S.A. and Razali, N.H.M. and Konda, R.E. and Atnaw, S.M. and Moni, M.N.Z. (2014) On the diversification of feedstock in gasification of oil palm fronds. Journal of Mechanical Engineering and Sciences, 6. pp. 907-915. ISSN 22894659

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2014) Effect of ferrocene concentration on the quality of multiwalled CNTs grown by floating catalytic chemical vapor deposition technique. Main Group Chemistry, 13 (3). pp. 251-259. ISSN 10241221

Sulaiman, S.A. and Zin, N.A.M. (2014) On gasifier cookstove operation fuelled by different lignocellulosic biomass materials. Journal of Mechanical Engineering, 11 (1). pp. 45-54. ISSN 18235514

Soleimani, H. and Latiff, N.R.A. and Yahya, N. and Zaid, H.M. and Sabet, M. and Guan, B.H. and Chuan, L.K. (2014) Effect of annealing temperature on the crystallization of hematite-alumina (Fe2O3-Al2O3 ) nanocomposite and its influence in EOR application. Journal of Nano Research, 29. pp. 105-113. ISSN 16625250

Salihi, I.U. and Kutty, S.R.M. and Isa, M.H. and Aminu, N. and Ezerie, H. (2014) Microwave incinerated sugarcane bagasse ash (MISCBA) as a low cost adsorbent for the removal of zinc in aqueous solution. WIT Transactions on Ecology and the Environment, 186. pp. 281-290. ISSN 17433541

Shabib-asl, A. and Ayoub, M.A. and Alta'ee, A.F. and Saaid, I.B.M. and Valentim, P.P.J. (2014) Comprehensive review of foam application during foam assisted water alternating gas (FAWAG) method. Research Journal of Applied Sciences, Engineering and Technology, 8 (17). pp. 1896-1904. ISSN 20407459

Said, A.M. (2014) Vector-projection approach to curve framing for extruded surfaces. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7971. pp. 596-607. ISSN 03029743

Sapari, N. and Orji, K.U. and Mohamad Hazli, M.H.B. and Yavari, S. and Olisa, E. and Asadpuor, R. (2014) Engineered wetland for the treatment of wastewater from fertilizer plant. Advanced Materials Research, 1051. pp. 500-504. ISSN 10226680

Saini, S. and Rambli, D.R.B.A. and Zakaria, M.N.B. and Sulaiman, S.B. (2014) A review on particle swarm optimization algorithm and its variants to human motion tracking. Mathematical Problems in Engineering, 2014. ISSN 1024123X

Saleem, H.M. and Hassan, M.F. and Buhari, S.M. (2014) Router redundancy with enhanced vrrp for intelligent message routing. Advances in Intelligent Systems and Computing, 287. pp. 581-590. ISSN 21945357

Syuhaidah, R. and Norani, M.M. and Sufian, S. (2014) The effect of surface area, pore volume, and pore size distribution on the modified multiwalled carbon nanotubes. Applied Mechanics and Materials, 625. pp. 148-151. ISSN 16609336

Siraj, K.M. and Yusoff, N. and Shuhaimi, M. and Ali, S.F. (2014) An integrated framework for refinery scheduling and operational optimization. Applied Mechanics and Materials, 625. pp. 390-393. ISSN 16609336

Subbarao, D. and Abd Elghafoor Hassan, R.H. and Ramasamy, M. (2014) Dynamics of wall heated packed bed reactors. Applied Mechanics and Materials, 625. pp. 402-405. ISSN 16609336

Subbarao, D. and Abd Elghafoor Hassan, R.H. and Ramasamy, M. (2014) Heat transfer with chemical reaction in wall heated packed bed reactor. Applied Mechanics and Materials, 625. pp. 722-725. ISSN 16609336

Salleh, M.Z.M. and Wilfred, C.D. and Abdul Mutalib, M.I. (2014) Desulfurization of fuel using ionic liquids: Computational selection of cation and anion. Applied Mechanics and Materials, 625. pp. 118-122. ISSN 16609336

Shahid, M.Z. and Maulud, A.S. and Bustam, M.A. (2014) Modelling of CO2 loading in DEA by using peak ratio of Raman spectroscopy. Applied Mechanics and Materials, 625. pp. 188-191. ISSN 16609336

Safdar, R. and Omar, A.A. and Ismail, L.B. and Lal, B. (2014) Solubility of CO2 in an aqueous ammonium based ionic liquid. Applied Mechanics and Materials, 625. pp. 549-552. ISSN 16609336

Shimekit, B. and Shariff, A. and Mukhtar, H. and Bustam, A. and Elkhalifah, A.E.I. and Ullah, S. and Riaz, N. (2014) Interfacial defects on mixed matrix membranes and mitigation techniques for gas separation: A review. Applied Mechanics and Materials, 625. pp. 653-656. ISSN 16609336

Subbarao, D. and Mohd. Zabidi, N.A. and Chowdhury, S. and Bustam-Khalil, M.A. and Mutalib, M.I.A. (2014) An equation of state for the liquid phase. Applied Mechanics and Materials, 625. pp. 582-585. ISSN 16609336

Shetty, N. and Ramasamy, M. and Pendyala, R. (2014) Effect of bulk temperature on formation of crude oil fouling precursors on heat transfer surfaces. Applied Mechanics and Materials, 625. pp. 482-485. ISSN 16609336

Samsudin, S.J. and Mansor, N. and Sufian, S. and Man, Z. (2014) Identifying thermal and pH stability of thiols compound in garlic extract. Applied Mechanics and Materials, 625. pp. 57-60. ISSN 16609336

Sow Mei, I.L. and Ismail, I.B. and Abdullah, B.B. and Shafquet, A. (2014) Evaluation of electrical capacitance tomography thresholding techniques for void fraction measurement of gas-liquid system. Applied Mechanics and Materials, 625. pp. 439-443. ISSN 16609336

Siyal, A.A. and Ismail, L. and Man, Z. and Azizli, K.A. (2014) Effect of NaOH and water contents on solidification of sodium silicate free geopolymer. Applied Mechanics and Materials, 625. pp. 3-6. ISSN 16609336

See, T.L. and Shariff, A.M. and Kok Keong, L. (2014) Optimization of temperature rise during CO2 absorption process using response surface methodology. Applied Mechanics and Materials, 625. pp. 42-45. ISSN 16609336

Sabet, M. and Soleimani, H. (2014) Electron-beam irradiation of halogen free flame retardant polymers for wire and cable applications. Applied Mechanics and Materials, 625. pp. 29-33. ISSN 16609336

Shah, S.N. and Mutalib, M.I.A. and Pilus, R.B.M. and Lethesh, K.C. (2014) Separation of naphthenic acid using hydroxide based ionic liquids. Applied Mechanics and Materials, 625. pp. 570-573. ISSN 16609336

Suleman, H. and Maulud, A.S. and Man, Z. (2014) Comparative study of linear co-volume based mixing rules for equation of state/ excess GIBBS energy (EOS/GE) models for CO2 � MEA and CO2 � MDEA systems. Applied Mechanics and Materials, 625. pp. 541-544. ISSN 16609336

Shaikh, M.S. and Shariff, A.M. and Bustam, M.A. and Murshid, G. (2014) Study of CO2 solubility in aqueous blend of potassium carbonate promoted with glycine. Applied Mechanics and Materials, 625. pp. 19-23. ISSN 16609336

Samsudin, Y.N. and Zulkefely, N.I.F. and Izhar, S.M.M. and Ku Shaari, K.Z. (2014) Effect of nanofillers on the spreading behavior of biopolymer materials on urea surface. Applied Mechanics and Materials, 625. pp. 907-910. ISSN 16609336

Sarwar, M. and Abd Majid, M.A.B. (2014) Study of weld hardness of pipes at elevated temperature application in power plants. Advanced Materials Research, 1025-1. pp. 310-316. ISSN 10226680

Suman, S. and Hussin, F.A. and Malik, A.S. and Walter, N. and Goh, K.L. and Hilmi, I. and Ho, S.H. (2014) Image enhancement using geometric mean filter and gamma correction for WCE images. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8836. pp. 276-283. ISSN 03029743

Shahzad, B. and Aziz, R. and Said, A.M. (2014) Using wage rate analysis to determine software project scale. Research Journal of Applied Sciences, Engineering and Technology, 8 (2). pp. 221-225. ISSN 20407459

Salam, M.A. and Abdullah, B. and Sufian, S. (2014) Hydrogenated microstructure and its hydrogenation properties: A density functional theory study. Journal of Nanomaterials, 2014. ISSN 16874110

Soleimani, H. and Yahya, N. and Shameli, K. and Abbas, Z. and Chuan, L.K. and Amighian, J. (2014) S-parameters of bismuth iron garnet (BIG) filled polyvinylidene fluoride composite using rectangular waveguide method. Advanced Materials Research, 1024. pp. 15-18. ISSN 10226680

Subramonian, S. and Said, M.R. and Rostam, O. and Hafiz, M.Z. and Luqman, H.H. and Shaaban, A. and Dimin, M.F. (2014) Top spray fluidized bed granulated paddy urea fertilizer. Applied Mechanics and Materials, 606. pp. 137-140. ISSN 16609336

Sajid, M. and Ghosh, D. (2014) Logarithm of short-time Fourier transform for extending the seismic bandwidth. Geophysical Prospecting, 62 (5). pp. 1100-1110. ISSN 00168025

Sabet, M. and Soleimani, H. and Hassan, A. and Ratnam, C.T. (2014) Electron Beam Irradiation of LDPE Filled with Calcium Carbonate and Metal Hydroxides. Polymer - Plastics Technology and Engineering, 53 (13). pp. 1362-1366. ISSN 03602559

Shahzad, A. and Saad, M.N.M. and Walter, N. and Malik, A.S. and Meriaudeau, F. (2014) A review on subcutaneous veins localization using imaging techniques. Current Medical Imaging Reviews, 10 (2). pp. 125-133. ISSN 15734056

Samer, A. and Ali, M. and Basu, P. and Ahmad, F. (2014) Wear resistance of Al-12Si alloys by reinforcing TiC and TiN particles. Journal of Engineering Mechanics, 140 (6). ISSN 07339399

Sagir, M. and Tan, I.M. and Mushtaq, M. and Nadeem, M. (2014) CO2 Mobility and CO2/Brine Interfacial Tension Reduction by Using a New Surfactant for EOR Applications. Journal of Dispersion Science and Technology, 35 (11). pp. 1512-1519. ISSN 01932691

Shaikh, P.H. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. (2014) Stochastic optimized intelligent controller for smart energy efficient buildings. Sustainable Cities and Society, 13. pp. 41-45. ISSN 22106707

Salam, M.A. and Sufian, S. (2014) Hydrogen adsorption capacity investigation of Ni-Co-Al mixed oxides. Advanced Materials Research, 917. pp. 360-364. ISSN 10226680

Siti Aisyah, M.S. and Petchpradab, P. and Uemura, Y. and Yusup, S.S. and Kanna, M. and Matsumura, Y. (2014) Ethanol production from hydrothermal pretreated empty fruit bunches. Advanced Materials Research, 917. pp. 80-86. ISSN 10226680

Shaheen, A.-R. and Hussin, F.A. and Hamid, N.H. and Ali, N.B.Z. (2014) A review on structural software-based self-testing of embedded processors. International Review on Computers and Software, 9 (5). pp. 832-846. ISSN 18286003

Sapari, N.B. and Mohd Ahmadan, N.A. and Riahi, A. and Orji, K.U. (2014) The performance of trapezoidal glass cover solar still during monsoon period of tropical environment. Applied Mechanics and Materials, 567. pp. 161-166. ISSN 16609336

Suriani, N.A.W. and Mohammed, N.I. and Faris, M.K. and Jamaludin, N. (2014) A field study of mould growth for institute higher education library buildings in Malaysia. Applied Mechanics and Materials, 567. pp. 553-558. ISSN 16609336

Seavhai, K. and Narayanan, S.P. (2014) Evaluation of roofing systems in Malaysia based on MS 1553, BS 6399, EC1-1-4 and IS 875 wind codes. Applied Mechanics and Materials, 567. pp. 577-582. ISSN 16609336

Shafiq, N. and Imran, M. and Akbar, I. (2014) An experimental study on the effects of biaxial bending due to eccentric load on RC beam. Applied Mechanics and Materials, 567. pp. 339-344. ISSN 16609336

Suliman, Y.G. and Madzlan, B.N. and Kamaruddin, I. and Olufemi, J.A. (2014) Low energy compaction of aggregate packing mechanism. Applied Mechanics and Materials, 567. pp. 422-427. ISSN 16609336

Shafiq, N. and Elhameed, A.A. and Nuruddin, M.F. (2014) Durability of sugar cane bagasse ash (SCBA) concrete towards chloride ion penetration. Applied Mechanics and Materials, 567. pp. 369-374. ISSN 16609336

Saeed, M.O. and Aziz, H.A. and Azizli, K.A.M. (2014) The art of integrated GIS/AHP for siting landfill: A review. Applied Mechanics and Materials, 567. pp. 144-149. ISSN 16609336

Shafiq, N. and Nuruddin, M.F. and Salih, A.F.M. and Elshekh, A.E.A. (2014) Characterization of stand chopped basalt fiber self - Compacting reinforced concrete (SCB-SCC). Applied Mechanics and Materials, 567. pp. 356-361. ISSN 16609336

Shafiq, N. and Ayub, T. and Nuruddin, M.F. (2014) Predictive stress-strain models for high strength concrete subjected to uniaxial compression. Applied Mechanics and Materials, 567. pp. 476-481. ISSN 16609336

Syed, Z.I. and Liew, M.S. and Hasan, M.H. and Venkatesan, S. (2014) Single-degree-of-freedom based pressure-impulse diagrams for blast damage assessment. Applied Mechanics and Materials, 567. pp. 499-504. ISSN 16609336

Shafiq, N. and Nuruddin, M.F. and Elshekh, A.E.A. and Salih, A.F.M. (2014) Effect of chopped basalt fiber on the fresh and hardened properties of fly ash high strength concrete. Applied Mechanics and Materials, 567. pp. 381-386. ISSN 16609336

Sebastian, A.A. and Kurian, V.J. and Al-Yacouby, A.M. and Liew, M.S. and Idichandy, V.G. (2014) Hydrodynamic forces on linear and multi-dimensional arrays of circular cylinders. Applied Mechanics and Materials, 567. pp. 259-264. ISSN 16609336

Soon, J.N.P. and Mahmood, A.K. and Yin, C.P. and Wan, W.S. and Yuen, P.K. and Heng, L.E. (2014) IaaS cloud optimisation during economic turbulence for Malaysia small and medium enterprise. International Journal of Business Information Systems, 16 (2). pp. 196-208. ISSN 17460972

Shaikh, M.S. and Shariff, A.M. and Bustam, M.A. and Murshid, G. (2014) Physical properties of aqueous solutions of potassium carbonate+glycine as a solvent for carbon dioxide removal. Journal of the Serbian Chemical Society, 79 (6). pp. 719-727. ISSN 03525139

Singh, N.S.S. (2014) Programmed tool for quantifying reliability and its application in designing circuit systems. Journal of Electrical and Computer Engineering, 2014. ISSN 20900147

Sahmer, A.Z. and Mohamed, N.M. (2014) Effect of reflective platinum film on the performance of flexible dye solar cell (DSC). Advanced Materials Research, 925. pp. 570-574. ISSN 10226680

Sabet, M. and Soleimani, H. and Hassan, A. and Ratnam, C.T. (2014) The Effect of Addition EVA and LDPE-g-MAH on Irradiated LDPE Filled with Metal Hydroxides. Polymer - Plastics Technology and Engineering, 53 (8). pp. 775-783. ISSN 03602559

Salih, A.F.M. and Shafiq, N. and Nuruddin, M.F. and Elheber, A. and Memon, F.A. (2014) Comparison of the effects of different fibers on the properties of self-compacting concrete. Research Journal of Applied Sciences, Engineering and Technology, 7 (16). pp. 3332-3341. ISSN 20407459

Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2014) Optimum design of ionization-based gas sensor using vertically aligned multiwalled carbon nanotubes array. Sensors and Actuators, B: Chemical, 199. pp. 232-238. ISSN 09254005

Sagir, M. and Tan, I.M. and Mushtaq, M. and Ismail, L. and Nadeem, M. and Azam, M.R. (2014) Synthesis of a New CO2 Philic Surfactant for Enhanced Oil Recovery Applications. Journal of Dispersion Science and Technology, 35 (5). pp. 647-654. ISSN 01932691

Shah, S.M.U. and Ahmad, A. and Othman, M.F. and Abdullah, M.A. (2014) Enhancement of lipid content in isochrysis galbana and pavlova lutheri using palm oil mill effluent as an alternative medium. Chemical Engineering Transactions, 37. pp. 733-738. ISSN 22839216

Singh, N.S.S. and Hamid, N.H. and Asirvadam, V.S. (2014) Reliability programmed tool and its application for fault tolerancecomputation. Advanced Materials Research, 909. pp. 397-404. ISSN 10226680

Sajid, M. and Ghosh, D.P. (2014) Increasing the robustness of homomorphic deconvolution for non-stationary seismic wavelet. Asian Journal of Earth Sciences, 7 (1). pp. 10-16. ISSN 18191886

Sirageldin, A. and Baharudin, B.B. and Jung, L.T. (2014) Malicious web page detection: A machine learning approach. Lecture Notes in Electrical Engineering, 279 LN. pp. 217-224. ISSN 18761100

Shoushtari, M.A. and Irawan, S. and Al Kayiem, A.P.H. and Wen, L.P. and Choong, K.W. (2014) Novel approach for heat transfer characterization in EOR steam injection wells. Research Journal of Applied Sciences, Engineering and Technology, 7 (11). pp. 2345-2352. ISSN 20407459

Shah, S.M.H. and Yusof, K.W. and Mustaffa, Z. and Hashim, A.M. (2014) Assessment of the detached soil particles and water discharge from a bare soil surface under the simulated rainfall conditions. Research Journal of Applied Sciences, Engineering and Technology, 7 (11). pp. 2217-2224. ISSN 20407459

Shuker, M.T. and Memon, K.R. and Tunio, S.Q. and Memon, M.K. (2014) Laboratory investigation on performance of cement using different additives schemes to improve early age compressive strength. Research Journal of Applied Sciences, Engineering and Technology, 7 (11). pp. 2298-2305. ISSN 20407459

Sharif, A.M. and Basri, S. and Ali, H.O. (2014) Strength and weakness of software risk assessment tools. International Journal of Software Engineering and its Applications, 8 (3). pp. 389-398. ISSN 17389984

Shaikh, P.H. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. and Ibrahim, T. (2014) A review on optimized control systems for building energy and comfort management of smart sustainable buildings. Renewable and Sustainable Energy Reviews, 34. pp. 409-429. ISSN 13640321

Singh, B.S.M. and Chong, F.K. and Nurlaela, E. (2014) Simulation of solar hydrogen production from water in the presence of TiO2-supported bimetallic Cu-Ni photocatalyst. World Applied Sciences Journal, 30 (30 A). pp. 370-374. ISSN 18184952

Suhaimee, S. and Serin, T. and Ali, A.K. and Sulaiman, N.H. and Ghazali, Z. (2014) Public awareness and perception of nanotechnology among Malaysian. World Applied Sciences Journal, 31 (3). pp. 367-375. ISSN 18184952

Shah, P.A. and Hasbullah, H.B. and Lawal, I.A. and Aminu Mu'Azu, A. and Tang Jung, L. (2014) A TOTP-based enhanced route optimization procedure for mobile IPv6 to reduce handover delay and signalling overhead. The Scientific World Journal, 2014. ISSN 1537744X

Sagir, M. and Tan, I.M. and Mushtaq, M. and Ismail, L. and Nadeem, M. and Azam, M.R. and Hashmet, M.R. (2014) Novel Surfactant for the Reduction of CO2/Brine Interfacial Tension. Journal of Dispersion Science and Technology, 35 (3). pp. 463-470. ISSN 01932691

Soleimani, H. and Yahya, N. and Sabet, M. and Abbas, Z. and Soleimani, H. and Kozlowski, G. and Ghotbi, M.Y. (2014) Electromagnetic properties of lanthanum iron garnet filled PVDF-polymer composite at microwave frequencies using finite element method (FEM) and nicholson-ross-weir (NRW) method. Digest Journal of Nanomaterials and Biostructures, 9 (1). pp. 53-60. ISSN 18423582

Samsudin, S.J. and Mansor, N.B. and Sufian, S. and Man, Z. (2014) The potential of garlic extract as bio-inhibitor in urea fertilizer. Key Engineering Materials, 594-59. pp. 296-300. ISSN 10139826

Syed, Z.I. and Liew, M.S. and Mendis, P. (2014) Performance of simplified damage assessment tools for reinforced concrete panels under blast loading. Key Engineering Materials, 594-59. pp. 492-497. ISSN 10139826

Salleh, N.A.M. and Abdullah, B. and Kamil, R.N.M. (2014) Extraction of phenol and acetic acid from synthetic bio-oil by ammonium sulfate solution. Key Engineering Materials, 594-59. pp. 286-290. ISSN 10139826

Samsudin, Y.N. and Kushaari, K. and Man, Z. and Sufian, S. (2014) Dynamic contact angle of modified biopolymer droplet on urea surface: Temperature effects. Key Engineering Materials, 594-59. pp. 566-570. ISSN 10139826

Salam, M.A. and Sufian, S. and Murugesan, T. (2014) Synthesis and characterization of nano-structured mixed oxides. Applied Mechanics and Materials, 446-44. pp. 196-200. ISSN 16609336

T

Talebian, S.H. and Tan, I.M. and Masoudi, R. and Onur, M. (2014) Fluid-fluid interactions in a system of CO2, oil, surfactant solution, and brine at high pressures and temperatures - A Malaysian reservoir case. Journal of Petroleum Science and Engineering, 124. pp. 313-322. ISSN 09204105

Talebian, S.H. and Masoudi, R. and Tan, I.M. and Zitha, P.L.J. (2014) Foam assisted CO2-EOR: A review of concept, challenges, and future prospects. Journal of Petroleum Science and Engineering, 120. pp. 202-215. ISSN 09204105

Taiwo, A.A. and Downe, A.G. and Loke, S.-P. (2014) Behavioral intention towards e-government in malaysia: A structural equation modeling approach. International Journal of Electronic Government Research, 10 (2). pp. 8-21. ISSN 15483886

Tariq Jan, M. and Hisham Bin Hamid, N. and Md Khir, M.H. and Ashraf, K. and Shoaib, M. (2014) Reliability and fatigue analysis in cantilever-based MEMS devices operating in harsh environments. Journal of Quality and Reliability Engineering, 2014. ISSN 23148055

Toloue, I. and Fateh, A. and Liew, M. (2014) Comparison of classical tsunami resistance systems in RC structure. Advances in Structural Engineering, 17 (2). pp. 157-164. ISSN 13694332

Tasfy, S.F.H. and Mohd Zabidi, N.A. and Subbarao, D. (2014) Effects of Cu and K promoters on the catalytic performance of ironbased nanocatalyst for Fischer-Tropsch synthesis. Advanced Materials Research, 832. pp. 15-20. ISSN 10226680

Turnad, L.G. and Bambang, A. (2014) Cutting force and temperature variation in bone drilling - A review. Advanced Materials Research, 845. pp. 934-938. ISSN 10226680

Triwiyanto, A. and Husain, P. and Anggraeni, S. and Ismail, M. (2014) Surface Morphology and Nanoindentation of Low Temperature Hybrid Treated of AISI 316L. Engineering Materials. pp. 93-103. ISSN 16121317

Teo, W. and Dipl-Ing, G.M. (2014) Shear effectiveness of shallow-angle bent-up bars for reinforced concrete beams. Proceedings of the Institution of Civil Engineers: Structures and Buildings, 167 (7). pp. 398-413. ISSN 09650911

Tunio, S.Q. and Bhattacharya, S.K. and Memon, K.R. and Irawan, S. and Kyaw, A. and Abdullah, M.F. (2014) Investigating methane adsorption potential of Malaysian coal for coal bed methane (CBM) study. Mediterranean Journal of Social Sciences, 5 (27). pp. 178-183. ISSN 20399340

Trinh, T.H. and Dao, Q.N. and Kushaari, K. and Ismail, L. and Shuib, A. (2014) Study the release of urea from Agrium® coated urea using UV-Vis spectrometer. Applied Mechanics and Materials, 625. pp. 745-748. ISSN 16609336

Taha, M.F. and Shuib, A.S. and Shaharun, M.S. and Borhan, A. (2014) Adsorptive removal of ni2+ from aqueous solution onto rice husk-based activated carbon. Applied Mechanics and Materials, 625. pp. 893-896. ISSN 16609336

Thuy, N.T.P. and Pendyala, R. and Marneni, N. (2014) Heat exchanger network optimization using differential evolution with stream splitting. Applied Mechanics and Materials, 625. pp. 373-377. ISSN 16609336

Tasfy, S.F.H. and Mohd Zabidi, N.A. and Shaharun, M.S. and Subbarao, D. (2014) Effect of Mn and Pb promoters on the performance of Cu/ZnO-catalyst in Co2 hydrogenation to methanol. Applied Mechanics and Materials, 625. pp. 289-292. ISSN 16609336

Tran, N. and Uemura, Y. and Chowdhury, S. and Ramli, A. (2014) A review of bio-oil upgrading by catalytic hydrodeoxygenation. Applied Mechanics and Materials, 625. pp. 255-258. ISSN 16609336

Tufa, L.D. and Ramasamy, M. (2014) Robust and effective PID controller identification for delay dominant systems. Applied Mechanics and Materials, 625. pp. 478-481. ISSN 16609336

Talpur, M.A.H. and Napiah, M. and Chandio, I.A. and Qureshi, T.A. (2014) A comprehensive evaluation of basic health facilities according to local standards and demographic features of umarkot sub-region, Pakistan. Research Journal of Applied Sciences, Engineering and Technology, 7 (22). pp. 4754-4762. ISSN 20407459

Ty, P. and Potty, N.S. and Akram, M.K.M. (2014) Mathematical matrix method to predict project total cost & schedule. International Journal of Applied Engineering Research, 9 (18). pp. 5029-5056. ISSN 09734562

Trinh, T.H. and KuShaari, K. and Shuib, A.S. and Bin Ismail, L. and Basit, A. and Azeem, B. (2014) Modeling the release of urea from coated urea: The constant release stage. Advanced Materials Research, 970. pp. 166-171. ISSN 10226680

Tan, L.S. and Shariff, A.B.M. and Keng, L.K. and Bustam, M.A.B. (2014) Application of response surface methodology to investigate CO2 absorption column temperature rise. Advanced Materials Research, 917. pp. 257-266. ISSN 10226680

Tahir, M. and Madni, T. and Ziauddin, S. and Awan, M. and Waqar, R. and Khalid, S. (2014) Wiimote squash: Comparing DTW and WFM techniques for 3D gesture recognition. International Arab Journal of Information Technology, 11 (4). pp. 362-369. ISSN 16833198

Teh, H.M. (2014) Wave transmission over a submerged porous breakwater: An experimental study. Applied Mechanics and Materials, 567. pp. 319-324. ISSN 16609336

Thuy, N.T.P. and Pendyala, R. and Rahmanian, N. and Marneni, N. (2014) Heat exchanger network optimization by differential evolution method. Applied Mechanics and Materials, 564. pp. 292-297. ISSN 16609336

Talpur, M.A.H. and Madzlan, N. and Irfan, A. and Chandio, I.A. and Hussain, S. (2014) Time-space geography: A creditable transport accessibility measure for rural dwellers. Applied Mechanics and Materials, 567. pp. 763-768. ISSN 16609336

Tarawneh, M.A. and Hj Ahmad, S. and Jiun, Y.L. and Dweiri, R. and Hassan, I.N. (2014) Morphology and mechanical properties of NiZn ferrite/ thermoplastic natural rubber composite. Advanced Materials Research, 925. pp. 308-312. ISSN 10226680

Termizi, W.S.A. and Liew, M.S. (2014) Extreme value analysis and joint densities of wind directionality, wind speed and wave height for Malaysian waters. Advanced Materials Research, 935. pp. 159-162. ISSN 10226680

Talpur, M.A.H. and Napiah, M. and Chandio, I.A. and Qureshi, T.A. (2014) An analysis of Umer Kots' public sector education facilities: A deserted subregion in Southern Pakistan. Research Journal of Applied Sciences, Engineering and Technology, 7 (9). pp. 1856-1862. ISSN 20407459

Tunio, S.Q. and Ismail, M.S. (2014) Effect of coal rank and porosity on the optimization of ECBM recovery. Asian Journal of Applied Sciences, 7 (3). pp. 158-168. ISSN 19963343

Taha, M.F. and Rosman, A.S. and Shaharun, M.S. (2014) Adsorptive removal of Pb(II) ion from aqueous solution using rice husk-based activated carbon. Advanced Materials Research, 875-87. pp. 196-201. ISSN 10226680

Triwiyanto, A. and Hussain, P. and Ismail, M.C. (2014) Nanoindentation and microstructure of hybrid treated of AISI 316L at low temperature. International Journal of Materials Engineering Innovation, 5 (1). pp. 38-47. ISSN 17572754

Tasfy, S.F.H. and Zabidi, N.A.M. and Subbarao, D. and Shaharun, M.S. (2014) Effects of synthesis conditions on the textural and morphological properties of mesoporous silica (SBA-15). Applied Mechanics and Materials, 446-44. pp. 201-205. ISSN 16609336

Taib, M.M. and Akbar, M.M. and Murugesan, T. (2014) Physical and excess properties of ternary mixtures of 1-butyl-3- methylimidazolium tetrafluoroborate + monoethanolamine + water at temperature from (303.15 to 353.15) K. Journal of Molecular Liquids, 190. pp. 23-29. ISSN 01677322

U

Umar, A.A. and Umar, U.H. and Ahmad, M. and Zawawi, N.A.W.A. and Aziz, A.R.A. (2014) STEMMING WATER-RELATED DEATHS IN SUB-SAHARAN AFRICA: THE PLACE OF ISLAMIC PROJECT FINANCE AND MALAYSIAN CONTRACTORS. ISRA International Journal of Islamic Finance, 6 (2). pp. 87-113. ISSN 01281976

Ullah, S. and Shariff, A.M. and Bustam, M.A. and Elkhalifah, A.E.I. and Murshid, G. and Riaz, N. and Shimekit, B. (2014) Effect of modified MIL-53 with multi-wall carbon nanotubes and nano fibers on CO2 adsorption. Applied Mechanics and Materials, 625. pp. 870-873. ISSN 16609336

Uemura, Y. and Norizan, A. and Afif, H.A. and Osman, N. and Omar, W.N. and Abdullah, B. and Tsutsui, T. (2014) Fast pyrolysis of oil palm kernel shell in a fluidized bed reactor: The effect of biomass size on the yields of pyrolysis products. Applied Mechanics and Materials, 625. pp. 608-611. ISSN 16609336

Ullah, Z. and Bustam, M.A. and Man, Z. (2014) Preparation of biodiesel from waste cooking oil catalyzed by basicionic liquid. Applied Mechanics and Materials, 625. pp. 874-876. ISSN 16609336

Ullah, S. and Bustam, M.A. and Nadeem, M. and Naz, M.Y. and Tan, W.L. and Shariff, A.M. (2014) Synthesis and thermal degradation studies of melamine formaldehyde resins. Scientific World Journal, 2014. ISSN 23566140

Ullah, S. and Ahmad, F. and Shariff, A.M. and Bustam, M.A. (2014) Synergistic effects of kaolin clay on intumescent fire retardant coating composition for fire protection of structural steel substrate. Polymer Degradation and Stability, 110. pp. 91-103. ISSN 01413910

Ullah, S. and Nadeem, M. and Shariff, A.B.M. and Ahmad, F. and Shahid, S.A. and Sagir, M. and Raza Malik, M.R. and Mushtaq, M. (2014) The synergistic effect of thiourea and surfactants on corrosion inhibition of stainless steel-316 in hydrochloric acid. Advanced Materials Research, 917. pp. 28-34. ISSN 10226680

Umar, A.A. and Zawawi, N.A.W.A. and Otairu, A.-G. and Othman, I. (2014) Private finance initiatives (PFI): Getting it right. Applied Mechanics and Materials, 567. pp. 601-606. ISSN 16609336

Ullah, S. and Ahmad, F. (2014) Effects of zirconium silicate reinforcement on expandable graphite based intumescent fire retardant coating. Polymer Degradation and Stability, 103 (1). pp. 49-62. ISSN 01413910

Ullah Khan, F. and Hussain, J. and Ullah Khan, I. and Muhammad, N. and Badshah, S. and Aslam, M.W. and Jan, S. and Khan, H. and Ali Khan, R. and Khan, H. (2014) Farmanol: A new dammarane methoxytriterpenediol from nepeta suavis. Asian Journal of Chemistry, 26 (1). pp. 119-121. ISSN 09707077

Ud Din, I. and Shaharun, M.S. and Subbarao, D. and Naeem, A. (2014) Homogeneous deposition precipitation method for synthesis of carbon nanofibre based Cu-ZrO2 catalyst for hydrogenation of CO2 to methanol. Applied Mechanics and Materials, 446-44. pp. 83-87. ISSN 16609336

V

Vakili, M. and Zwain, H.M. and Rafatullah, M. and Gholami, Z. and Mohammadpour, R. (2014) Potentiality of Palm Oil Biomass with Cow Dung for compost production. KSCE Journal of Civil Engineering, 19 (7). pp. 1994-1999. ISSN 12267988

Vasant, P. (2014) Hybrid line search and simulated annealing for production planning system in industrial engineering. International Journal of Manufacturing, Materials, and Mechanical Engineering, 4 (2). pp. 1-13. ISSN 21561680

van Thien Duc, N. and Sufian, S. and Mansor, N. and Yahya, N. (2014) Investigation of carbon nanofiber supported iron catalyst preparation by deposition precipitation. Advanced Materials Research, 1043. pp. 71-75. ISSN 10226680

W

Wei, K.S. and Karuppanan, S. and Wahab, A.A. (2014) Development of the shape functions for fatigue test using digital image correlation. Applied Mechanics and Materials, 465-46. pp. 862-866. ISSN 16609336

Woldemichael, D.E. and Lai, J.J. and Sujan, D. (2014) Topology optimization of beam structures with various end and loading conditions. Applied Mechanics and Materials, 465-46. pp. 22-26. ISSN 16609336

Wassan, M.A. and Habib, K. and Bin Hassan, S. (2014) Mathematical modeling for the regenerator of liquid desiccant airconditioning system. Applied Mechanics and Materials, 465-46. pp. 226-231. ISSN 16609336

Wan Ab Rashid, W.N. and Uemura, Y. and Kusakabe, K. and Osman, N. and Abdullah, B. (2014) Biodiesel production from palm oil in a millichannel reactor. Applied Mechanics and Materials, 465-46. pp. 232-236. ISSN 16609336

Wahab, N.D.A. and Rusli, R. and Mohd Shariff, A. and Buang, A. (2014) Assessment of human factor performance using Bayesian inference and inherent safety. Advanced Materials Research, 845. pp. 658-662. ISSN 10226680

Waris, M. and Shahir Liew, M. and Khamidi, M.F. and Idrus, A. (2014) Criteria for the selection of sustainable onsite construction equipment. International Journal of Sustainable Built Environment, 3 (1). pp. 96-110. ISSN 22126090

Wagdy, M. and Faye, I. and Rohaya, D. (2014) Border noise removal and clean up based on retinex theory. Lecture Notes in Electrical Engineering, 285 LN. pp. 345-352. ISSN 18761100

Wong, M.K. and Bustam, M.A. and Shariff, A.M. (2014) Raman spectroscopic study for the determination of monoethanolamine concentration. Applied Mechanics and Materials, 625. pp. 709-713. ISSN 16609336

Wahab, I.B.M.A. and Fong Yeong, Y. (2014) Effect of ultrasonic pre-treatment durations on the formation of zeolite-T. Applied Mechanics and Materials, 625. pp. 911-915. ISSN 16609336

Waris, M. and Liew, M.S. and Faris, M.K. and Arazi, I. (2014) Major challenges to the sustainable operations of construction equipment in Malaysia. Applied Mechanics and Materials, 567. pp. 589-594. ISSN 16609336

Wee, T. and Yin, H. and Maharun, M. and Saravanan, K. and Liew, M.S. and Salleh, A.R. and Wong, T.C. (2014) Research on HGV collisions with concrete bridge piers. Applied Mechanics and Materials, 567. pp. 648-653. ISSN 16609336

Waris, M. and Liew, M.S. and Khamidi, M.F. and Idrus, A. (2014) Environmental implications of onsite mechanization in the Malaysian construction industry. WIT Transactions on Ecology and the Environment, 181. pp. 147-160. ISSN 17433541

Wardaya, P.D. and Major, R.P. and Sum, C.W. and Ridha, S. (2014) Seismic modelling for investigating the influence of pore geometry to the seismic velocity in carbonate rock. First Break, 32 (6). pp. 155-156. ISSN 02635046

Weng, M.L. and Ding, H.T. (2014) Consumer acceptance and continuance of online group buying. Journal of Computer Information Systems, 54 (3). pp. 87-96. ISSN 08874417

Weis, M. and Lee, K. and Taguchi, D. and Manaka, T. and Iwamoto, M. (2014) Modified transmission-line method for evaluation of the contact resistance: Effect of channel-length-dependent threshold voltage. Japanese Journal of Applied Physics, 53 (1). ISSN 00214922

Wassan, R.K. and Majid, M.A.A. and Mokhtar, A.A. (2014) Impact of different repair assumptions on repairable system risk assessment. Research Journal of Applied Sciences, Engineering and Technology, 7 (4). pp. 870-874. ISSN 20407459

Y

Yahya, N. and Kamel, N.S. and Malik, A.S. (2014) Subspace-based technique for speckle noise reduction in ultrasound images. BioMedical Engineering Online, 13 (1). ISSN 1475925X

Yaqub, A. and Isa, M.H. and Kutty, S.R.M. and Ajab, H. (2014) Electrochemical degradation of PAHs in produced water using Ti/Sb2O5-SnO2-IrO2 anode. Electrochemistry, 82 (11). pp. 979-984. ISSN 13443542

Yahaya Khan, M. and Abdul Karim, Z.A. and Hagos, F.Y. and Aziz, A.R.A. and Tan, I.M. (2014) Current trends in water-in-diesel emulsion as a fuel. The Scientific World Journal, 2014. ISSN 1537744X

Yunus, M. and Shuib, A.S. and Fawad, H. (2014) Numerical simulation to investigate the effect of non Newtonian properties of blood on wall shear stress in diseased artery. Applied Mechanics and Materials, 465-46. pp. 789-795. ISSN 16609336

Yazid, E. and Liew, M.S. and Setyamartana, P. and Kurian, V.J. and Ng, C.Y. (2014) Nonlinear system identification of floating structures using time-varying ARX-based volterra model. Applied Mechanics and Materials, 465-46. pp. 3-7. ISSN 16609336

Yahya, N. and Kashif, M. and Shafie, A. and Solemani, H. and Zaid, H.M. and Latiff, N.R.A. (2014) Improved oil recovery by high magnetic flux density subjected to iron oxide nanofluids. Journal of Nano Research, 26. pp. 89-99. ISSN 16625250

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. and Ng, C.Y. (2014) Prediction of surge motion response of floating structure using kalman smoother adaptive filters based time-domain volterra model. Applied Mechanics and Materials, 660. pp. 799-803. ISSN 16609336

Yasir, M. and Chowdhury, S. and Mansor, N. and Mohammad, N.M. and Uemura, Y. (2014) Upgrading of pyrolysis bio-oil to fuel over supported nanomaterials �A review. Applied Mechanics and Materials, 625. pp. 357-360. ISSN 16609336

Yong, R. and Maulud, A.S. and Suleman, H. (2014) Economic optimization of Co2 capture process using MEA-MDEA mixtures. Applied Mechanics and Materials, 625. pp. 422-425. ISSN 16609336

Yaqub, S. and Mellon, N. and Shariff, A.M. (2014) A review on robustness of covalent organic polymers for Co2 capture. Applied Mechanics and Materials, 625. pp. 237-240. ISSN 16609336

Yusup, S. (2014) Response to "comment on study of fuel properties of rubber seed oil based biodiesel" Energy Convers. Manage. 2014;78:266-275 by Ahmad et al. Energy Conversion and Management, 86. pp. 1189-1192. ISSN 01968904

Yeong, Y.F. and Novichaka, S.A. and Lai, L.S. and Lau, K.K. and Azmi, M.S. (2014) Investigation of ultrasonic pretreatment on the synthesis of Zeolite-T and its CO2 adsorption characteristics. Advanced Materials Research, 970. pp. 35-38. ISSN 10226680

Yin, H. and Wee, T. (2014) Prediction the shear strength for FRP shear strengthened RC beams based on optimised truss models. Applied Mechanics and Materials, 567. pp. 469-475. ISSN 16609336

Yenduri, A. and Ahmed, M.O. and Kurian, V.J. (2014) A studyon mooring systemsof an offshore floating platform for different configurations. Applied Mechanics and Materials, 567. pp. 197-203. ISSN 16609336

Yusof, K.W. and Shah, S.M.H. and Zahiraniza, M. and Hashim, A.M. (2014) Response of partially covered road embankments and its environmental impact. Applied Mechanics and Materials, 567. pp. 133-138. ISSN 16609336

Yavari, S. and Malakahmad, A. and Sapari, N.B. (2014) The effects of feedstock sources and pyrolytic temperature on biochars sorptive characteristics. Applied Mechanics and Materials, 567. pp. 150-154. ISSN 16609336

Yiin, C.L. and Yusup, S. and Udomsap, P. and Yoosuk, B. and Sukkasi, S. (2014) Stabilization of Empty Fruit Bunch (EFB) derived Bio-oil using Antioxidants. Computer Aided Chemical Engineering, 33. pp. 223-228. ISSN 15707946

Yusup, S. and MookTzeng, L. (2014) Editorial. International Journal of Nano and Biomaterials, 5 (1). pp. 1-2. ISSN 17528933

Yahya, N. and Kamel, N.S. and Malik, A.S. (2014) Subspace-based technique for speckle noise reduction in SAR images. IEEE Transactions on Geoscience and Remote Sensing, 52 (10). pp. 6257-6271. ISSN 01962892

Yahaya, N.Z. and Yazid, S. and Osman, A. and Huzairi, H. (2014) Wideband low noise amplifier design for 2.3-2.4 GHz WiMAX application. Lecture Notes in Electrical Engineering, 291 LN. pp. 373-384. ISSN 18761100

Yusof, R.H. and Ibrahim, I. (2014) Experimental Investigation of Vibration Characteristics for Vapor Cavitation in Plain Journal Bearing. Applied Mechanics and Materials, 541-54. pp. 613-617. ISSN 16609336

Yussiff, A.-L. and Yong, S.-P. and Baharudin, B.B. (2014) Detecting people using histogram of oriented gradients: A step towards abnormal human activity detection. Lecture Notes in Electrical Engineering, 279 LN. pp. 1145-1150. ISSN 18761100

Yaqub, A. and Isa, H.M. and Kutty, S.R.M. and Ajab, H. (2014) Surface characteristics of ti/iro2 anode material and its electrocatalytic properties for polycyclic aromatic hydrocarbons (pahs) degradation in aqueous solution. Journal of New Materials for Electrochemical Systems, 17 (1). pp. 39-44. ISSN 14802422

Yusup, S. and Khan, Z. and Ahmad, M.M. and Rashidi, N.A. (2014) Optimization of hydrogen production in in-situ catalytic adsorption (ICA) steam gasification based on response surface methodology. Biomass and Bioenergy, 60. pp. 98-107. ISSN 09619534

Z

Zhalehrajabi, E. and Rahmanian, N. and Zarrinpashne, S. and Balasubramanian, P. (2014) Investigation of the growth of particles produced in a laval nozzle. Particulate Science and Technology, 32 (6). pp. 595-601. ISSN 02726351

Zubair, M. and Tang, T.B. (2014) A high resolution capacitive sensing system for the measurement of water content in crude oil. Sensors (Switzerland), 14 (7). pp. 11351-11361. ISSN 14248220

Ziyada, A.K. and Wilfred, C.D. (2014) Effect of temperature and anion on densities, viscosities, and refractive indices of 1-Octyl-3-propanenitrile Imidazolium-based ionic liquids. Journal of Chemical and Engineering Data, 59 (5). pp. 1385-1390. ISSN 00219568

Ziyada, A.K. and Wilfred, C.D. (2014) Physical properties of ionic liquids consisting of 1-butyl-3- propanenitrile- and 1-decyl-3-propanenitrile imidazolium-based cations: Temperature dependence and influence of the anion. Journal of Chemical and Engineering Data, 59 (4). pp. 1232-1239. ISSN 00219568

Zhi, R.L.L. and Bustam, M.A. and Riaz, N. and Shariff, A.M. (2014) Efficiency of visible light assisted fenton oxidation of diisopropanolamine (DIPA) of natural gas industry wastewater. Advanced Materials Research, 845. pp. 477-481. ISSN 10226680

Zaid, H.M. and Latiff, N.R.A. and Yahya, N. and Soleimani, H. and Shafie, A. (2014) Application of electromagnetic waves and dielectric nanoparticles in enhanced oil recovery. Journal of Nano Research, 26. pp. 135-142. ISSN 16625250

Zahari, A.A. and Jaafar, J. (2014) Hybridization of hidden markov model and case based reasoning for time series forecasting. Frontiers in Artificial Intelligence and Applications, 265. pp. 63-74. ISSN 09226389

Zaid, H.M. and Azahar, W.A.W. and Soleimani, H. and Latiff, N.R.A. and Shafie, A. and Lee, K.C. and Beh, H.G. (2014) Effect of Nickel: Zinc ratio in nickel-zinc-ferrite nanoparticles as surfactant on recovery efficiency in enhanced oil recovery. Journal of Nano Research, 29. pp. 115-120. ISSN 16625250

Zulkifli, S.A. and Mohd, S. and Saad, N. and Aziz, A.R.A. (2014) Impact of motor size &efficiency on acceleration, Fuel consumption &Emissions of split- axle through- the- road parallel hybrid electric vehicle. Applied Mechanics and Materials, 663. pp. 498-503. ISSN 16609336

Zardari, M.A. and Jung, L.T. and Zakaria, M.N.B. (2014) Data classification based on confidentiality in virtual cloud environment. Research Journal of Applied Sciences, Engineering and Technology, 8 (13). pp. 1498-1509. ISSN 20407459

Zaini, D. and Shariff, A.M. and Leong, C.T. (2014) Three-tier inherent safety quantification (3-TISQ) for toxic release at preliminary design stage. Applied Mechanics and Materials, 625. pp. 426-430. ISSN 16609336

Zulfiqar, M. and Omar, A.A. and Chowdhury, S. (2014) Removal of phosphate and fluoride from industrial wastewater � A short review. Applied Mechanics and Materials, 625. pp. 805-808. ISSN 16609336

Zainal Abidin, M.U.S. and Mukhtar, H. and Shaharun, M.S. (2014) Removal of amines from wastewater using membrane separation processes. Applied Mechanics and Materials, 625. pp. 639-643. ISSN 16609336

Zabiri, H. and Ariff, M. and Tufa, L.D. and Ramasamy, M. (2014) A comparison study between integrated OBFARX-NN and OBF-NN for modeling of nonlinear systems in extended regions of operation. Applied Mechanics and Materials, 625. pp. 382-385. ISSN 16609336

Zain, A.M. and Abu, A. (2014) In-vivo blood glucose control by phenolic compound from Vernonia amygdalina, Andrographis paniculata, and Pithecellobium jiringa in Streptozotoxin-induced diabetic rats. Advances in Environmental Biology, 8 (14). pp. 131-134. ISSN 19950756

Zaid, H.M. and Ahmad Latiff, N.R. and Yahya, N. (2014) The effect of zinc oxide and aluminum oxide nanoparticles on interfacial tension and viscosity of nanofluids for enhanced oil recovery. Advanced Materials Research, 1024. pp. 56-59. ISSN 10226680

Zia-ul-Mustafa, M. and Ahmad, F. and Megat-Yusoff, P.S.M. and Aziz, H. (2014) The effect of wollastonite filler on thermal performance of intumescent fire retardant coating. Advanced Materials Research, 970. pp. 328-331. ISSN 10226680

Zaine, S.N.A. and Mohamed, N.M. and Bustam, M.A. (2014) Optimized TiO2 nanocrystallites aggregates for enhanced efficiency in dye solar cells. Advanced Materials Research, 917. pp. 35-44. ISSN 10226680

Zainal-Abidin, M. and Yusoff, N. and Mohd-Siraj, K. (2014) A taguchi-SQP approach for minimizing energy per unit diesel production at crude distillation unit. Advanced Materials Research, 917. pp. 220-231. ISSN 10226680

Zawawi, N.A.W.A. and Lun, N.K. and Liew, M.S. (2014) Development of platform selection tool for offshore decommissioning in Malaysia. Applied Mechanics and Materials, 567. pp. 222-227. ISSN 16609336

Zhalehrajabi, E. and Rahmanian, N. (2014) Nucleation and condensation modeling of metal vapor in Laval nozzle. Advanced Materials Research, 925. pp. 185-189. ISSN 10226680

Zaine, S.N.A. and Mohamed, N.M. and Samsudin, A.E. and Sahmer, A.Z. (2014) Effect of metal doped-TiO2 on the performance of dye solar cells (DSCs). Advanced Materials Research, 925. pp. 548-552. ISSN 10226680

Zhalehrajabi, E. and Rahmanian, N. and Hasan, N. (2014) Effects of mesh grid and turbulence models on heat transfer coefficient in a convergent-divergent nozzle. Asia-Pacific Journal of Chemical Engineering, 9 (2). pp. 265-271. ISSN 19322135

Zain, A.M. and Shaaban, M.G. and Mahmud, H. (2014) Leachability of metal ions in TCLP leachate of solidified petroleum sludge. Key Engineering Materials, 594-59. pp. 1094-1098. ISSN 10139826

Zain, A.M. and Shaaban, M.G. and Mahmud, H. (2014) The effect of cement replacement materials to the hydration of petroleum sludge in OPC. Key Engineering Materials, 594-59. pp. 385-389. ISSN 10139826

Zewge, M.G. and Lemma, T.A. and Ibrahim, A.A. and Sujan, D. (2014) Modeling and simulation of a heat recovery steam generator using partially known design point data. Advanced Materials Research, 845. pp. 596-603. ISSN 10226680