A

Ahmad, I. and Abdullah, A. and Alghamdi, A. and Alnfajan, K. and Hussain, M. (2011) Intrusion detection using feature subset selection based on MLP. Scientific Research and Essays, 6 (34). pp. 6804-6810. ISSN 19922248

Assaad, M. and Yohannes, I. (2011) Design and characterization of multi-color sensor circuit. IEICE Electronics Express, 8 (24). pp. 2093-2099. ISSN 13492543

Assaad, M. and Alser, M. (2011) An FPGA-based design and implementation of an all-digital serializer for inter module communication in SoC. IEICE Electronics Express, 8 (23). pp. 2017-2023. ISSN 13492543

Ahmad, M.M. and Chiew, C.K. and Inayat, A. and Yusup, S. (2011) Simulation of integrated pressurized steam gasification of biomass for hydrogen production using iCON. Journal of Applied Sciences, 11 (21). pp. 3593-3599. ISSN 18125654

Ahmad, M.M. and Aziz, M.F. and Inayat, A. and Yusup, S. (2011) Heat integration study on biomass gasification plant for hydrogen production. Journal of Applied Sciences, 11 (21). pp. 3600-3606. ISSN 18125654

Azmi, N. and Mukhtar, H. and Sabil, K.M. (2011) Purification of natural gas with high CO2 content by formation of gas hydrates: Thermodynamic verification. Journal of Applied Sciences, 11 (21). pp. 3547-3554. ISSN 18125654

Al-Absi, H.R.H. and Abdullah, A. and Hassan, M.I. and Bashir Shaban, K. (2011) Hybrid intelligent system for disease diagnosis based on artificial neural networks, fuzzy logic, and genetic algorithms. Communications in Computer and Information Science, 252 CC (PART 2). pp. 128-139. ISSN 18650929

Amin, A. and Hassan, M.F. and Ariffin, M.B.M. and Rehman, M. (2011) Knowledge sharing: Two-dimensional motivation perspective and the role of demographic variables. Journal of Information and Knowledge Management, 10 (2). pp. 135-149. ISSN 02196492

Akib, A.B.Md. and Saad, N.B. and Asirvadam, V.S. (2011) Ensemble dual algorithm using RBF recursive learning for partial linear network. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 6592 L (PART 2). pp. 252-261. ISSN 03029743

Arunagiri, A. and Regupathi, I. and Murugesan, T. (2011) Interfacial area and mass transfer coefficients in liquid-gas ejectors. Theoretical Foundations of Chemical Engineering, 45 (6). pp. 818-823. ISSN 00405795

Akhtar, M.N. and Yahya, N. and Koziol, K. and Nasir, N. (2011) Synthesis and characterizations of Ni0.8Zn0.2Fe 2O4-MWCNTs composites for their application in sea bed logging. Ceramics International, 37 (8). pp. 3237-3245. ISSN 02728842

Asfaw, T.D. and Saiedi, S. (2011) Optimal short-term cascade reservoirs operation using genetic algorithm. Asian Journal of Applied Sciences, 4 (3). pp. 297-305. ISSN 19963343

Arshad, M. and Armi, N. and Kamel, N. and Saad, N.M. (2011) Mobile data collector based routing protocol for wireless sensor networks. Scientific Research and Essays, 6 (29). pp. 6162-6175. ISSN 19922248

Al-Kayiem, H.H. and Salih, T.W. and Al-Ambari, A.S. (2011) Performance prediction procedures of the supersonic spiked intakes. Asian Journal of Scientific Research, 4 (3). pp. 224-235. ISSN 19921454

Abdulkarim, M. and Shafie, A. and Razali, R. and Wan Ahmad, W.F. and Arif, A. (2011) Comparison on performance of radial basis function neural network and discriminant function in classification of CSEM data. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7066 L (PART 1). pp. 113-124. ISSN 03029743

Abdollah, N. and Wan Ahmad, W.F. and Patah Akhir, E.A. (2011) Usability evaluation for 'Komputer Saya': Multimedia courseware for slow learners. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7067 L (PART 2). pp. 104-113. ISSN 03029743

Abdul Karim, B. and Jais, M. and Ariffin Abdul Karim, S. (2011) The subprime crisis and stock index futures markets integration. Journal of Risk Finance, 12 (5). pp. 400-408. ISSN 15265943

Ali, S. and Mohd Zabidi, N.A. and Subbarao, D. (2011) Correlation between Fischer-Tropsch catalytic activity and composition of catalysts. Chemistry Central Journal, 5 (1). ISSN 1752153X

Ali, S. and Zabidi, N.A.M. and Subbarao, D. (2011) Development of niobium-promoted cobalt catalysts on carbon nanotubes for Fischer-Tropsch synthesis. Journal of Natural Gas Chemistry, 20 (6). pp. 659-663. ISSN 10039953

Ayaz, M. and Baig, I. and Abdullah, A. and Faye, I. (2011) A survey on routing techniques in underwater wireless sensor networks. Journal of Network and Computer Applications, 34 (6). pp. 1908-1927. ISSN 10848045

Ahmad, F. and Raza, M.R. (2011) Quantitative analysis of fiber fracture in powder injection molded metal composites. Defect and Diffusion Forum, 319-32. pp. 65-76. ISSN 10120386

Ahmad, T. and Mamat, O. and Wahjoedi, B.A. (2011) Development and characterization of alumina-silica sand nanoparticle composites. Defect and Diffusion Forum, 319-32. pp. 85-94. ISSN 10120386

Amir, A. and Mamat, O. (2011) A review of wear mechanisms of ceramic-reinforced metal-matrix composite: Case study of nano silica reinforced iron. Defect and Diffusion Forum, 319-32. pp. 77-84. ISSN 10120386

Ahmeda, T. and Mamat, O. (2011) Characterization and properties of copper-silica sand nanoparticle composites. Defect and Diffusion Forum, 319-32. pp. 95-105. ISSN 10120386

Atiq-Ur-Rahman and Hasbullah, H. and Khan, O.U. (2011) Energy holes mitigation techniques in sink's proximity using sensor deployment in wireless sensor networks. Research Journal of Information Technology, 3 (3). pp. 167-180. ISSN 18157432

Akbar, R. and Hassan, M.F. and Abdullah, A. and Safdar, S. and Qureshi, M.A. (2011) Directions and advancements in global software development: A summarized review of GSD and agile methods. Research Journal of Information Technology, 3 (2). pp. 69-80. ISSN 18157432

Abou-Hamad, E. and Babaa, M.-R. and Bouhrara, M. and Kim, Y. and Saih, Y. and Dennler, S. and Mauri, F. and Basset, J.-M. and Goze-Bac, C. and WÃ¥gberg, T. (2011) Structural properties of carbon nanotubes derived from 13C NMR. Physical Review B - Condensed Matter and Materials Physics, 84 (16). ISSN 10980121

Ahmad, M. and Abdullah, A.B. and Ahmad, I. and Zaman, N. (2011) An optimized indicator sequence for coding identification in Eukaryotes. Information, 14 (10). pp. 3305-3311. ISSN 13434500

Aris, M.S. and McGlen, R. and Owen, I. and Sutcliffe, C.J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 13594311

Asif Khan, M. and Jeoti, V. and Shahid Manzoor, R. (2011) Secure interleaving - Physical layer security enhancement of OFDM based system. Communications in Computer and Information Science, 171 CC. pp. 349-361. ISSN 18650929

Akbar, R. and Hassan, M.F. and Abdullah, A. (2011) A review of prominent work on agile processes software process improvement and process tailoring practices. Communications in Computer and Information Science, 181 CC (PART 3). pp. 571-585. ISSN 18650929

Adhipta, D. and Hassan, Mohd.F. and Mahmood, A.K. (2011) Elasticity study: DBrain project grid-cloud integration. Communications in Computer and Information Science, 180 CC (PART 2). pp. 652-662. ISSN 18650929

Aris, M.S. and Owen, I. and Sutcliffe, C.J. (2011) The development of active vortex generators from shape memory alloys for the convective cooling of heated surfaces. International Journal of Heat and Mass Transfer, 54 (15-16). pp. 3566-3574. ISSN 00179310

Alvarez, L. and Almadori, Y. and Arenal, R. and Babaa, R. and Michel, T. and Le Parc, R. and Bantignies, J.-L. and Jousselme, B. and Palacin, S. and Hermet, P. and Sauvajol, J.-L. (2011) Charge transfer evidence between carbon nanotubes and encapsulated conjugated oligomers. Journal of Physical Chemistry C, 115 (24). pp. 11898-11905. ISSN 19327447

Alhassan, A.M. and Saad, N.M. and Badruddin, N. (2011) An enhanced detection technique for spectral amplitude coding optical CDMA systems. IEEE Photonics Technology Letters, 23 (13). pp. 875-877. ISSN 10411135

Ahmad, M. and Abdullah, A. and Buragga, K. (2011) A novel optimized approach for gene identification in DNA sequences. Journal of Applied Sciences, 11 (5). pp. 806-814. ISSN 18125654

Alian, S.S. and Omar, A.A. and Alta'ee, A.F. and Hani, I. (2011) Study of asphaltene precipitation induced formation damage during CO 2 injection for a Malaysian light oil. World Academy of Science, Engineering and Technology, 78. pp. 733-737. ISSN 2010376X

Awang, Z.B. and Bashir, M.J.K. and Kutty, S.R.M. and Isa, M.H. (2011) Post-treatment of slaughterhouse wastewater using electrochemical oxidation. Research Journal of Chemistry and Environment, 15 (2). pp. 229-237. ISSN 09720626

Abdullah Synmsul, B. and Man, Z. and Ismail, L. and Maulud, A. and Abdul Mutalib, M.I. and Bustam, M.A. (2011) An Optimization Study on the Extraction of Benzothiophene from Model Fuel using the Ionic Liquids 1-Butyl-3-MethylimidazoliumOctylsulfate. Research Journal of Chemistry and Environment, 15 (2). pp. 510-518. ISSN 09720626

Ahmed, A. and Dominic, D.D. and Abdullah, A. (2011) A novel replication strategy for large-scale mobile distributed database systems. Journal of Engineering Science and Technology, 6 (3). pp. 271-302. ISSN 18234690

Ahmad Fadzil, M.H. and Izhar, L.I. and Nugroho, H. and Nugroho, H.A. (2011) Analysis of retinal fundus images for grading of diabetic retinopathy severity. Medical and Biological Engineering and Computing, 49 (6). pp. 693-700. ISSN 01400118

Ahmeda, T. and Mamat, O. (2011) Characterization and properties of iron/silica-sand-nanoparticle composites. Defect and Diffusion Forum, 316-31. pp. 97-106. ISSN 10120386

Akbar, R. and Hassan, M.F. and Qureshi, M.A. and Safdar, S. (2011) Structured role based interaction model for agile based outsourced IT projects: Client's composite structure. Information Technology Journal, 10 (5). pp. 1009-1016. ISSN 18125638

Ahmad, M.M. and Inayat, A. and Yusup, S. and Sabil, K.M. (2011) Simulation of oxygen-steam gasification with C02 adsorption for hydrogen production from empty fruit bunch. Journal of Applied Sciences, 11 (12). pp. 2171-2178. ISSN 18125654

Asmara, Y.P. and Ismail, M.C. (2011) Study combinations effects of HAc in H2S/CO2 corrosion. Journal of Applied Sciences, 11 (10). pp. 1821-1826. ISSN 18125654

Asma, R.B.A.N. and Yuli, P.A. and Mokhtar, C.I. (2011) Study on the effect of surface finish on corrosion of carbon steel in CO2 environment. Journal of Applied Sciences, 11 (11). pp. 2053-2057. ISSN 18125654

Al-Kayiem, H.H. and Ghanizadeh, A.H. (2011) Analysis of the temperature distribution in GT blade cooled by compressed air. Journal of Applied Sciences, 11 (10). pp. 1733-1740. ISSN 18125654

Ariatedja, J.B. and Mamat, O. (2011) A semi-elliptical crack modeling and fracture constraint on failure diagram. Journal of Applied Sciences, 11 (11). pp. 2006-2011. ISSN 18125654

Ahmed, M.S.A.M.S. and Gilani, S.I.U. (2011) Steady state simulation of a double-effect steam absorption chiller. Journal of Applied Sciences, 11 (11). pp. 2018-2023. ISSN 18125654

Anbese, Y.T. and Aziz, A.R.A. and Karim, Z.A.B.A. (2011) Flame development study at variable swirl level flows in a stratified CNG DI combustion engine using image processing technique. Journal of Applied Sciences, 11 (10). pp. 1698-1706. ISSN 18125654

Abidin, K.A.Z. and Lee, K.C. and Ibrahim, I. and Zainudin, A. (2011) Problem analysis at a semiconductor company: A case study on IC packages. Journal of Applied Sciences, 11 (11). pp. 1937-1944. ISSN 18125654

al-Khairi, N.N. and Naveenchandran, P. and Aziz, A.R.A. (2011) Comparison of HCCI and SI characteristics on low load CNG-DI combustion. Journal of Applied Sciences, 11 (10). pp. 1827-1832. ISSN 18125654

Atnaw, S.M. and Sulaiman, H.A. and Yusup, S. (2011) A simulation study of downdraft gasification of oil-palm fronds using ASPEN PLUS. Journal of Applied Sciences, 11 (11). pp. 1913-1920. ISSN 18125654

Altaf, K. and Raghavan, V.R. and Rani, A.M.A. (2011) Comparative thermal analysis of circular and profiled cooling channels for injection mold tools. Journal of Applied Sciences, 11 (11). pp. 2068-2071. ISSN 18125654

Ahmad, F. and Raza, M.R. and Rani, A.M.A. and Jason Lo, S.H. (2011) Wear properties of alumina particles reinforced aluminium alloy matrix composite. Journal of Applied Sciences, 11 (9). pp. 1673-1677. ISSN 18125654

Alnaimi, F.B.I. and Al-Kayiem, H.H. (2011) Artificial intelligent system for steam boiler diagnosis based on superheater monitoring. Journal of Applied Sciences, 11 (9). pp. 1566-1572. ISSN 18125654

Amir, N. and Ahmad, F. and Megat-Yusoff, P.S.M. (2011) Study on the fibre reinforced epoxy-based intumescent coating formulations and their char characteristics. Journal of Applied Sciences, 11 (10). pp. 1678-1687. ISSN 18125654

Abdul Lateef, O.A. and Khamidi, M.F. and Idrus, A. (2011) Behavioural issues in maintenance of university buildings. Journal of Retail and Leisure Property, 9 (5). pp. 415-428. ISSN 14791110

Ali, S. and Zabidi, N.A.M. and Subbarao, D. (2011) Effect of loading on the physicochemical properties of alumina supported Co/Mo bimetallic nanocatalysts. Journal of Applied Sciences, 11 (7). pp. 1421-1425. ISSN 18125654

Ahmed, S. and Ramli, A. (2011) Effect of surfactant concentration on the physico-chemical characteristics of mesoporous molecular sieve. Journal of Applied Sciences, 11 (7). pp. 1178-1184. ISSN 18125654

Ariwahjoedi, B. and Parman, S. (2011) Does phenotype-genotype distinction apply for simple molecules?: A thought in the chemical philosophical context. Journal of Applied Sciences, 11 (7). pp. 1249-1254. ISSN 18125654

Abidin, A.Z. (2011) Remedial tutorials for differential equations. Journal of Applied Sciences, 11 (7). pp. 1231-1236. ISSN 18125654

Akhtar, M.N. and Yahya, N. and Daud, H. and Shafie, A. and Zaid, H.M. and Kashif, M. and Nasir, N. (2011) Development of EM wave guide amplifier potentially used for sea bed logging. Journal of Applied Sciences, 11 (7). pp. 1361-1365. ISSN 18125654

Ahmed, R. and Sinnathambi, C.M. and Subbarao, D. (2011) Kinetics of De-coking of spent reforming catalyst. Journal of Applied Sciences, 11 (7). pp. 1225-1230. ISSN 18125654

Al Wadi, S. and Ismail, M.T. and Alkhahazaleh, M.H. and Addul Karim, S.A. (2011) Selecting wavelet transforms model in forecasting financial time series data based on ARIMA model. Applied Mathematical Sciences, 5 (5-8). pp. 315-326. ISSN 1312885X

Ahmad, M. and Abdullah, A. and Buragga, K. (2011) DNA splicing in Eukaryotes by an enhanced and robust technique. Australian Journal of Basic and Applied Sciences, 5 (3). pp. 158-170. ISSN 19918178

Amran, A.A. and Shukri, S.R.M. and Taib, S.M. (2011) Entrepreneurship game: Digital 'Catur Bistari'. World Academy of Science, Engineering and Technology, 75. pp. 486-491. ISSN 2010376X

Al-Kayiem, H.H. and El-Rahman, M.F. (2011) Ribbed double pipe heat exchanger: Analytical analysis. Journal of Engineering Science and Technology, 6 (1). pp. 39-49. ISSN 18234690

Amir, A. and Amin, A.H.M. and Srinivasan, B. (2011) P2P-based image recognition for component tracking in a large engineering domain. Civil-Comp Proceedings, 95. ISSN 17593433

Almadori, Y. and Alvarez, L. and Arenal, R. and Babaa, R. and Michel, T. and Le Parc, R. and Bantignies, J.-L. and Jouselme, B. and Palacin, S. and Hermet, P. and Sauvajol, J.-L. (2011) Charge transfer in conjugated oligomers encapsulated into carbon nanotubes. Physica Status Solidi (B) Basic Research, 248 (11). pp. 2560-2563. ISSN 03701972

Al Yacouby, A.M. and Khamidi, M.F. and Teo, Y.W. and Nuruddin, M.F. and Farhan, S.A. and Sulaiman, S.A. and Razali, A.E. (2011) Housing developers and home owners awareness on implementation of building insulation in Malaysia. WIT Transactions on Ecology and the Environment, 148. pp. 219-230. ISSN 17433541

Amin, M.A.R.M.M. and Kutty, S.R.M. and Isa, M.H. (2011) Effect of organic load of refinery wastewater in municipal wastewater treatment using bench scale extended aeration activated sludge system. WIT Transactions on Ecology and the Environment, 145. pp. 701-709. ISSN 17433541

Abdullah Zawawi, N.A.W. and Abdullah, A. (2011) Evaluating stakeholders preferences: Reconciling heritage and sustainability. WIT Transactions on Ecology and the Environment, 150. pp. 675-686. ISSN 17433541

Arif, A. and Asirvadam, V.S. and Karsiti, M.N. (2011) Modeling marine electromagnetic survey with radial basis function networks. ITB Journal of Information and Communication Technology, 5 (2). pp. 227-242. ISSN 19783086

Ahmad, I. and Abdullah, A.B. and Alghamdi, A.S. and Hussain, M. (2011) Distributed denial of service attacks detection using support vector machine. Information, 14 (1). pp. 127-134. ISSN 13434500

Abd, T.H. and Aljunid, S.A. and Fadhil, H.A. and Ahmad, R.A. and Saad, N.M. (2011) Development of a new code family based on SAC-OCDMA system with large cardinality for OCDMA network. Optical Fiber Technology, 17 (4). pp. 273-280. ISSN 10685200

Armi, N. and Yusoff, M.Z. and Saad, N.M. (2011) Multiuser sensing for opportunistic spectrum access in cognitive radio networks. European Journal of Scientific Research, 52 (4). pp. 569-579. ISSN 1450216X

Akhmad Setiawan, N. and Venkatachalam, P.A. and Ahmad Fadzil, M.H. (2011) A knowledge discovery from incomplete coronary artery disease datasets using rough set. International Journal of Medical Engineering and Informatics, 3 (1). pp. 60-77. ISSN 17550653

Ahmad Fadzil, M.H. and Lila Iznita, I. and Adi Nugroho, H. (2011) Area analysis of foveal avascular zone in diabetic retinopathy colour fundus images. International Journal of Medical Engineering and Informatics, 3 (1). pp. 84-98. ISSN 17550653

B

Basri, S. and O'Connor, R.V. (2011) Towards an understanding of software development process knowledge in very small companies. Communications in Computer and Information Science, 253 CC (PART 3). pp. 62-71. ISSN 18650929

Basri, S. and O'Connor, R.V. (2011) A study of software development team dynamics in SPI. Communications in Computer and Information Science, 172. pp. 143-154. ISSN 18650929

Baig, I. and Jeoti, V. (2011) A new Discrete Hartley transform precoding based interleaved-OFDMA uplink system with reduced PAPR for 4G cellular networks. Journal of Engineering Science and Technology, 6 (6). pp. 685-694. ISSN 18234690

Bég, O.A. and Ghosh, S.K. and Narahari, M. and Bég, T.A. (2011) Mathematical modeling of thermal radiation effects on transient gravity-driven optically thick gray convection flow along an inclined plane with pressure gradient. Chemical Engineering Communications, 198 (12). pp. 1630-1644. ISSN 00986445

Bin Tomi, A. and Rambli, D.R.A. (2011) A conceptual design for augmented reality games using motion detection as user interface and interaction. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7067 L (PART 2). pp. 305-315. ISSN 03029743

Baig, I. and Jeoti, V. (2011) A novel precoding based hybrid MC/SC radio access system for PAPR reduction in layered OFDMA of LTE-advanced. IAENG International Journal of Computer Science, 38 (4). pp. 314-319. ISSN 1819656X

Baig, I. and Jeoti, V. (2011) A novel Zadoff-Chu matrix transform precoded interleaved-OFDMA uplink system for 4G cellular systems: Peak to average power ratio performance. IETE Journal of Research, 57 (6). pp. 557-562. ISSN 03772063

Balogun, A.-L. and Matori, A.-N. and Lawal, D.U. (2011) Geovisualization of sub-surface pipelines: A 3D approach. Modern Applied Science, 5 (4). pp. 158-165. ISSN 19131844

Baig, I. and Jeoti, V. (2011) On the papr reduction in OFDM systems: A novel ZCT precoding based SLM technique. Journal of Engineering Science and Technology, 6 (3). pp. 359-370. ISSN 18234690

Baheta, A.T. and Gilani, S.H. (2011) Exergy based performance analysis of a gas turbine at part load conditions. Journal of Applied Sciences, 11 (11). pp. 1994-1999. ISSN 18125654

Belachew, C.T. and Ismail, M.C. and Karuppanan, S. (2011) Burst strength analysis of corroded pipelines by finite element method. Journal of Applied Sciences, 11 (10). pp. 1845-1850. ISSN 18125654

Badri, T.M. and Al-Kayiem, H.H. (2011) Numerical analysis of thermal and elastic stresses in thick pressure vessels for cryogenic hydrogen storage apparatus. Journal of Applied Sciences, 11 (10). pp. 1756-1762. ISSN 18125654

Batcha, M.F.M. and Raghavan, V.R. (2011) Experimental studies on a swirling fluidized bed with annular distributor. Journal of Applied Sciences, 11 (11). pp. 1980-1986. ISSN 18125654

Bhaskoro, P.T. and Gilani, S.I.U.H. (2011) Transient cooling load characteristic of an academic building, using TRNSYS. Journal of Applied Sciences, 11 (10). pp. 1777-1783. ISSN 18125654

Babiker, A.E. and Zakaria, M.N.B. and Yosif, H. and Ibrahim, S.B. (2011) An efficient energy adaptive hybrid error correction technique for underwater wireless sensor networks. World Academy of Science, Engineering and Technology, 51. pp. 1389-1395. ISSN 2010376X

Babiker, A.E. and Zakaria, M.N.B. (2011) Energy efficiency analysis of error correction techniques in underwater wireless sensor networks. Journal of Engineering Science and Technology, 6 (1). pp. 17-28. ISSN 18234690

Bég, O.A. and Ghosh, S.K. and Narahari, M. (2011) Mathematical modeling of oscillatory MHD couette flow in a rotating highly permeable medium permeated by an oblique magnetic field. Chemical Engineering Communications, 198 (2). pp. 235-254. ISSN 00986445

Barretto, A.I. and Bingham, C.R. and Goh, K.N. and Shope, J.T. (2011) Developing a Web-Based Health Promotion Intervention: A Case Study From a Brief Motivational Alcohol Program. Health Promotion Practice, 12 (2). pp. 193-201. ISSN 15248399

C

Chen, Y.Y. and Wan Ahmad, W.F. and Zulkarnain, N.Z. (2011) FaceSnap: Game-based courseware as a learning tool for children with social impairment. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7067 L (PART 2). pp. 316-322. ISSN 03029743

Chin, W.M. and Raghavan, V.R. (2011) The influence of the moments of probability density function for flow maldistribution on the thermal performance of a fin-tube heat exchanger. International Journal of Thermal Sciences, 50 (10). pp. 1942-1953. ISSN 12900729

Chandio, I.A. and Matori, A.-N. and Lawal, D.U. and Sabri, S. (2011) GIS-based land suitability analysis using AHP for public parks planning in Larkana City. Modern Applied Science, 5 (4). pp. 177-189. ISSN 19131844

Chandio, I.A. and Matori, A.N.B. and Lawal, D.U. (2011) GIS-based accessibility analysis using suitable land for public Parksin Larkana city Pakistan. Research Journal of Applied Sciences, Engineering and Technology, 3 (6). pp. 553-557. ISSN 20407459

Cobbi, R. and Sahoo, N.C. (2011) A fuzzy iterative modulation algorithm for torque ripple minimization in switched reluctance motors. Engineering Intelligent Systems, 19 (2). pp. 77-92. ISSN 14728915

Chetty, R.M.K. and Singaperumal, M. and Nagarajan, T. (2011) Distributed formation planning and navigation framework for wheeled mobile robots. Journal of Applied Sciences, 11 (9). pp. 1501-1509. ISSN 18125654

Chin, W.M. and Raghavan, V.R. (2011) Effect of the moments of probability density function for non-uniform air flow distribution on the hydraulic performance of a fin-tube heat exchanger. Journal of Applied Sciences, 11 (11). pp. 1952-1958. ISSN 18125654

Chikere, A.O. and Al-Kayiem, H.H. and Karim, Z.A.A. (2011) Review on the enhancement techniques and introduction of an alternate enhancement technique of solar chimney power plant. Journal of Applied Sciences, 11 (11). pp. 1877-1884. ISSN 18125654

Chin, W.M. and Raghavan, V.R. (2011) On the adverse influence of higher statistical moments of flow maldistribution on the performance of a heat exchanger. International Journal of Thermal Sciences, 50 (4). pp. 581-591. ISSN 12900729

Chatterjee, K. and Ganguly, S. and Kargupta, K. and Banerjee, D. (2011) Bismuth nitrate doped polyaniline - Characterization and properties for thermoelectric application. Synthetic Metals, 161 (3-4). pp. 275-279. ISSN 03796779

Chaudhuri, M. and Saminal, S.N.B. (2011) Coconut coir activated carbon: An adsorbent for removal of lead from aqueous solution. WIT Transactions on Ecology and the Environment, 148. pp. 95-104. ISSN 17433541

Chandrasekaran, K. and Rama Rao, K.S. (2011) A method for quality power provider to operate in distorted supply condition. Journal of Theoretical and Applied Information Technology, 30 (1). pp. 18-27. ISSN 19928645

Chaudhuri, M. and Elmolla, E.S. and Othman, R.B. (2011) Adsorption of reactive dyes Remazol Red F-3B and Remazol Blue from aqueous solution by coconut coir activated carbon. Nature Environment and Pollution Technology, 10 (2). pp. 193-196. ISSN 09726268

Chetty, R.M.K. and Singaperumal, M. and Nagarajan, T. and Tetsunari, I. (2011) Coordination control of wheeled mobile robots - A hybrid approach. International Journal of Computer Applications in Technology, 41 (3-4). pp. 195-204. ISSN 09528091

Chandrasekaran, K. and Rama Rao, K.S. (2011) A method for quality power provider to operate in distorted supply condition. Journal of Theoretical and Applied Information Technology, 30 (2). pp. 66-75. ISSN 19928645

Chee, K.L. and Mohd Zabidi, N.A. and Mohan, C. (2011) Synthesis of cobalt nano particles on silica support using the strong electrostatic adsorption (SEA) method. Defect and Diffusion Forum, 312-31. pp. 370-375. ISSN 10120386

D

Dzulkafli, H.H. and Hussain, P. and Mamat, O. and Ahmad, F. (2011) Preparation and characterization of intumescent coating using talc Mg 3SiO 4O 10(OH 2) as a filler. Malaysian Journal of Microscopy, 7 (1). pp. 58-64. ISSN 18237010

Dooba, I. (2011) Towards the creation of story sharing network of research supervisors. Academic Leadership, 9 (3). ISSN 15337812

Drieberg, M. and Zheng, F.-C. and Ahmad, R. (2011) MICPA: A client-assisted channel assignment scheme for throughput enhancement in WLANs. IEEE Transactions on Vehicular Technology, 60 (9). pp. 4497-4508. ISSN 00189545

Djoni Bustan, M. and Mahadzir, S. and Kharismadewi, D. (2011) Exergy analysis and flowsheet modification of PT. PUSRI II Palembang's reformer unit for the production of synthesis gas from natural gas. Asia-Pacific Journal of Chemical Engineering, 6 (5). pp. 760-770. ISSN 19322135

Dimas, F.A. and Gillani, S.I. and Ans, M.S. (2011) Preliminary investigation into the use of solar PV systems for residential application in Bandar Sri Iskandar, Malaysia. Journal of Applied Sciences, 11 (11). pp. 2012-2017. ISSN 18125654

Devarajan, R. and Mahendran, S. and Karim, Z.A.A. and Nagarajan, T. (2011) Design of valveless micropump using preliminary characteristics from fluid flow. Journal of Applied Sciences, 11 (11). pp. 2072-2075. ISSN 18125654

Dennis, J.O. and Sihat, M.S.B.M. and Ahmed, A.Y. and Ahmad, F. (2011) Piezoresistive pressure sensor design, simulation and modification using coventor ware software. Journal of Applied Sciences, 11 (7). pp. 1426-1430. ISSN 18125654

de An, Y. and Singh, B.S.M. (2011) Sustainable solar-wind hybrid power plant for implementation in Malaysia. Journal of Applied Sciences, 11 (7). pp. 1121-1128. ISSN 18125654

Daud, H. and Yahya, N. and Harun, R. (2011) Wireless control mechanism for EM source and receiver positioning for offshore application. Journal of Applied Sciences, 11 (7). pp. 1087-1095. ISSN 18125654

Daud, H. and Yahya, N. and Asirvadam, V. (2011) Development of EM simulator for sea bed logging applications using MATLAB. Indian Journal of Marine Sciences, 40 (2). pp. 267-274. ISSN 03795136

Dominic, P.D.D. and Jati, H. (2011) A comparison of Asian airlines websites quality: Using a non-parametric test. International Journal of Business Innovation and Research, 5 (5). pp. 599-623. ISSN 17510252

Dominic, P.D.D. and Jati, H. and Sellappan, P. and Nee, G.K. (2011) A comparison of Asian e-government websites quality: Using a non-parametric test. International Journal of Business Information Systems, 7 (2). pp. 220-246. ISSN 17460972

E

Eldemerdash, U.M.N. (2011) Using ceramic materials for enhanced wastewater treatment in industrial applications. InterCeram: International Ceramic Review, 60 (2). pp. 100-104. ISSN 00205214

Engida Woldemichael, D. and Mohd Hashim, F. (2011) A framework for function�based conceptual design support system. Journal of Engineering, Design and Technology, 9 (3). pp. 250-272. ISSN 17260531

El-Harbawi, M. and Acellam, D. and Yin, C.-Y. (2011) Development of educational software for designing shell-and-tube heat exchangers. International Journal of Mechanical Engineering Education, 39 (4). pp. 291-296. ISSN 03064190

Elmolla, E.S. and Chaudhuri, M. (2011) Combined photo-Fenton-SBR process for antibiotic wastewater treatment. Journal of Hazardous Materials, 192 (3). pp. 1418-1426. ISSN 03043894

Elamin, A. and Jeoti, V. and Belhouari, S. (2011) Best fit models test for the virtual channel in distributed video coding. Journal of Engineering Science and Technology, 6 (4). pp. 481-492. ISSN 18234690

Ellis, G.A. (2011) Application of the Wheeler incremental inductance rule for robust design and modeling of MMIC spiral inductors. Applied Computational Electromagnetics Society Journal, 26 (6). pp. 484-493. ISSN 10544887

Eltilib, R.A.E.E. and Al Kayiem, H.H. and Jaafar, A. (2011) Investigation on the particle settling velocity in non-Newtonian fluids. Journal of Applied Sciences, 11 (9). pp. 1528-1535. ISSN 18125654

Elmolla, E.S. and Chaudhuri, M. (2011) The feasibility of using combined TiO2 photocatalysis-SBR process for antibiotic wastewater treatment. Desalination, 272 (1-3). pp. 218-224. ISSN 00119164

El-Khatib, N. (2011) Design and analysis of single pulse tests. Journal of Petroleum Science and Engineering, 77 (1). pp. 69-77. ISSN 09204105

Elsheikh, Y.A. and Man, Z. and Bustam, M.A. and Yusup, S. and Wilfred, C.D. (2011) Brønsted imidazolium ionic liquids: Synthesis and comparison of their catalytic activities as pre-catalyst for biodiesel production through two stage process. Energy Conversion and Management, 52 (2). pp. 804-809. ISSN 01968904

Eisakhani, M. and Pauzi, A. and Karim, O. and Malakahmad, A. (2011) Investigation and management of water pollution sources in Cameron highlands, Malaysia. WIT Transactions on Ecology and the Environment, 148. pp. 231-241. ISSN 17433541

Elshiekh, A.A. and Dominic, P.D.D. (2011) Statistical analysis for comparison of the key representation database with the original database. International Journal of Business Information Systems, 8 (4). pp. 339-360. ISSN 17460972

Elraies, K.A. and Tan, I.M. and Fathaddin, M.T. and Abo-Jabal, A. (2011) Development of a new polymeric surfactant for chemical enhanced oil recovery. Petroleum Science and Technology, 29 (14). pp. 1521-1528. ISSN 10916466

F

Fadzil, M.H.A. and Nugroho, H. and Jolivot, R. and Marzani, F. and Shamsuddin, N. and Baba, R. (2011) Modelling of reflectance spectra of skin phototypes III. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7066 L (PART 1). pp. 352-360. ISSN 03029743

Farooq, M. and Ramli, A. and Subbarao, D. (2011) The effects of MgO loading on the surface properties of γ-Al 2O 3 in the mixed oxides. Australian Journal of Basic and Applied Sciences, 5 (11). pp. 1342-1351. ISSN 19918178

Farisi, A. and Hassan, M.F. (2011) Dbrain portal for collaborative biogrid environment. Communications in Computer and Information Science, 179 CC (PART 1). pp. 269-277. ISSN 18650929

Fazal-E-Amin and Mahmood, A.K. and Oxley, A. (2011) Metrics based variability assessment of code assets. Communications in Computer and Information Science, 181 CC (PART 3). pp. 66-75. ISSN 18650929

Farooq, M. and Ramli, A. and Subbarao, D. (2011) Some studies on the synthesis and surface properties of mixed oxides of alumina and magnesia. Research Journal of Chemistry and Environment, 15 (2). pp. 715-720. ISSN 09720626

Faizan, A. and Kok, K.L. and Mohd, S.A. and Ghulam, M. (2011) CO 2 capture from natural gas using membrane separation system: Process simulation, parametric analysis and joule thompson effect. Research Journal of Chemistry and Environment, 15 (2). pp. 238-244. ISSN 09720626

Fatah, M.C. and Ismail, M.C. and Ari-Wahjoedi, B. and Kurnia, K.A. (2011) Effects of sulphide ion on the corrosion behaviour of X52 steel in a carbon dioxide environment at temperature 40 °c. Materials Chemistry and Physics, 127 (1-2). pp. 347-352. ISSN 02540584

Firmansyah, A.R. and Aziz, A. (2011) The combustion behavior analysis of dual fuel HCCI using the shell model. Journal of Applied Sciences, 11 (9). pp. 1559-1565. ISSN 18125654

Firmanto, H. and Hussain, P. and Mamat, O. (2011) Reaction layers of the diffusion-bonded sialon and high-chromium steel. Journal of Applied Sciences, 11 (10). pp. 1809-1814. ISSN 18125654

Faye, I. (2011) On integer sequences related to a memorization technique. Journal of Applied Sciences, 11 (7). pp. 1473-1475. ISSN 18125654

Farooq, M. and Ramli, A. and Gul, S. and Muhammad, N. (2011) The study of wear behaviour of 12-hydroxystearic acid in vegetable oils. Journal of Applied Sciences, 11 (7). pp. 1381-1385. ISSN 18125654

Fareed Ahmed, M. and Fadhil Nuruddin, M. and Shafiq, N. (2011) Compressive strength and workability characteristics of low-calcium fly ash-based self-compacting geopolymer concrete. World Academy of Science, Engineering and Technology, 74. pp. 8-14. ISSN 2010376X

Fatah, M.C. and Ismail, M.C. (2011) Empirical equation of CO2 corrosion with presence of low concentrations of acetic acid under turbulent flow conditions. Corrosion Engineering Science and Technology, 46 (1). pp. 49-55. ISSN 1478422X

Fazal-E-Malik and Baharudin, B.B. (2011) Mean and standard deviation features of color histogramusing laplacian filter for content-based image retrieval. Journal of Theoretical and Applied Information Technology, 34 (1). pp. 1-7. ISSN 19928645

Fadzil, M.H.A. and Izhar, L.I. and Nugroho, H.A. (2011) Analysis of foveal avascular zone for grading of diabetic retinopathy. International Journal of Biomedical Engineering and Technology, 6 (3). pp. 232-250. ISSN 17526418

Fazal-e-Amin and Mahmood, A.K. and Oxley, A. (2011) A review of software component reusability assessment approaches. Research Journal of Information Technology, 3 (1). pp. 1-11. ISSN 18157432

G

Ganesan, T. and Vasant, P. and Elamvazuthi, I. (2011) Optimization of nonlinear geological structure mapping using hybrid neuro-genetic techniques. Mathematical and Computer Modelling, 54 (11-12). pp. 2913-2922. ISSN 08957177

Ganesan, T. and Elamvazuthi, I. and Vasant, P. (2011) Solving engineering optimization problems with the Karush-Kuhn-Tucker hopfield neural networks. International Review of Mechanical Engineering, 5 (7). pp. 1333-1339. ISSN 19708734

Ghazali, Z. and Halib, M. (2011) Towards an alternative organizational structure for plant turnaround maintenance: An experience of PETRONAS gas Berhad, Malaysia. European Journal of Social Sciences, 26 (1). pp. 40-48. ISSN 14502267

Gizaw, M. and Rani, A.M.B.A. and Yusof, Y. (2011) Design of STEP-compliant system for turn-mill operations using XML. Journal of Applied Sciences, 11 (7). pp. 1171-1177. ISSN 18125654

H

Hasan, M.H. and Haron, N.S. and Md Yazid, N.S.S. (2011) Improving M-examination results system using multimedia messaging service. World Applied Sciences Journal, 14 (11). pp. 1620-1627. ISSN 18184952

Hani, A.F.M. and Arshad, L. and Malik, A.S. and Jamil, A. and Bin, F.Y.B. (2011) Detection and classification of granulation tissue in chronic ulcers. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7066 L (PART 1). pp. 139-150. ISSN 03029743

Hani, A.F.M. and Prakasa, E. and Fitriyah, H. and Nugroho, H. and Affandi, A.M. and Hussein, S.H. (2011) High order polynomial surface fitting for measuring roughness of psoriasis lesion. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7066 L (PART 1). pp. 341-351. ISSN 03029743

Hussin, N.H. and Jaafar, J. and Downe, A.G. (2011) Assessing educators' acceptance of Virtual Reality (VR) in the classroom using the Unified Theory of Acceptance and Use of Technology (UTAUT). Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7066 L (PART 1). pp. 216-225. ISSN 03029743

Hashim, A.S. and Wan Ahmad, W.F. and Ahmad, R. (2011) Usability study of mobile learning course content application as a revision tool. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7067 L (PART 2). pp. 23-32. ISSN 03029743

Halib, M. and Ghazali, Z. (2011) Moulding cutting-edge engineers for the borderless century: The constructive role of the social sciences. European Journal of Social Sciences, 24 (3). pp. 413-420. ISSN 14502267

Hisham, S.F. and Ahmad, I. and Daik, R. and Ramli, A. (2011) Preparation and characterization of UPR/LNR/glass fiber composite by using unsaturated polyester resin (PET) from PET wastes Penyediaan dan pencirian komposit UPR/LNR/gentian kaca terawat menggunakan resin poliester tak tepu daripada bahan buangan PET. Sains Malaysiana, 40 (9). pp. 1029-1035. ISSN 01266039

Hailegiorgis, S.M. and Mahadzir, S. and Subbarao, D. (2011) Enhanced in situ ethanolysis of Jatropha curcas L. in the presence of cetyltrimethylammonium bromide as a phase transfer catalyst. Renewable Energy, 36 (9). pp. 2502-2507. ISSN 09601481

Hassan, M.I. and Abdullah, A. (2011) A semantic service discovery framework for intergrid. Communications in Computer and Information Science, 179 CC (PART 1). pp. 448-462. ISSN 18650929

Hisham, S.F. and Ahmad, I. and Daik, R. and Ramli, A. (2011) Blends of LNR with unsaturated polyester resin from recycled PET: Comparison of mechanical properties and morphological analysis with the optimum blend by commercial resin. Sains Malaysiana, 40 (7). pp. 729-735. ISSN 01266039

Hasan, N. and Zakaria, Z.B. (2011) Computational approach for a pair of bubble coalescence process. International Journal of Heat and Fluid Flow, 32 (3). pp. 755-761. ISSN 0142727X

Hassan, C.S. and Hussain, P. and Awang, M. (2011) Stress analysis on direct joining of Sialon to AISI 430 ferritic stainless steel. Journal of Applied Sciences, 11 (10). pp. 1803-1808. ISSN 18125654

Hidayat, M.I.P. and Ariwahjoedi, B. (2011) Model of neural networks with sigmoid and radial basis functions for velocity-field reconstruction in fluid-structure interaction problem. Journal of Applied Sciences, 11 (9). pp. 1587-1593. ISSN 18125654

Hassan, S. and Nor, F.M. and Zainal, Z.A. and Miskam, M.A. (2011) Performance and emission characteristics of supercharged biomass producer gas-diesel dual fuel engine. Journal of Applied Sciences, 11 (9). pp. 1606-1611. ISSN 18125654

Hussin, H. and Hashim, F.M. (2011) Modeling of maintenance downtime distribution using expert opinion. Journal of Applied Sciences, 11 (9). pp. 1573-1579. ISSN 18125654

Hussain, S. and Aziz, H.A. and Isa, M.H. and Ahmad, A. and Van Leeuwen, J. and Zou, L. and Beecham, S. and Umar, M. (2011) Orthophosphate removal from domestic wastewater using limestone and granular activated carbon. Desalination, 271 (1-3). pp. 265-272. ISSN 00119164

Hasan, M.K. and Sulaiman, J. and Karim, S.A.A. and Othman, M. (2011) Development of some numerical methods applying complexity reduction approach for solving scientific problem. Journal of Applied Sciences, 11 (7). pp. 1255-1260. ISSN 18125654

Haruman, E. and Sun, Y. and Triwiyanto, A. and Manurung, Y.H.P. and Adesta, E.Y. (2011) A feasibility study on low temperature thermochemical treatments of austenitic stainless steel in fluidized bed furnace. High Temperature Materials and Processes, 30 (1-2). pp. 23-29. ISSN 03346455

Hussain, M. and Takita, K. (2011) Changes in the phase diagram of Zn-doped YBCO single crystals. International Journal of Modern Physics B, 25 (5). pp. 629-635. ISSN 02179792

Hamid, N.H. and Tang, T.B. and Murray, A.F. (2011) Probabilistic neural computing with advanced nanoscale MOSFETs. Neurocomputing, 74 (6). pp. 930-940. ISSN 09252312

Hani, A.F.M. and Sathyamoorthy, D. and Sagayan Asirvadam, V. (2011) A method for computation of surface roughness of digital elevation model terrains via multiscale analysis. Computers and Geosciences, 37 (2). pp. 177-192. ISSN 00983004

Hudiyo, F. and Patthi, H. and Mamat, O. (2011) Suppression of iron silicide formation in the reaction layer of sialon- 7.5 Cr ferritic steel joint. Defect and Diffusion Forum, 312-31. pp. 888-893. ISSN 10120386

Hassan, M. and Abdullah, A. (2011) A new grid resource discovery framework. International Arab Journal of Information Technology, 8 (1). ISSN 16833198

I

Iqbal, A. and Jeoti, V. (2011) A novel Wavelet-Galerkin method for modeling radio wave propagation in tropospheric ducts. Progress In Electromagnetics Research B (36). pp. 35-52. ISSN 19376472

Idrus, A. and Sodangi, M. and Husin, M.H. (2011) Prioritizing project performance criteria within client perspective. Research Journal of Applied Sciences, Engineering and Technology, 3 (10). pp. 1142-1151. ISSN 20407459

Idrus, A. and Sodangi, M. and Yaakob, J. (2011) Legal effect of breach of warranty in construction insurance in Malaysia. Research Journal of Applied Sciences, Engineering and Technology, 3 (12). pp. 1366-1373. ISSN 20407459

Idrus, A. and Sodangi, M. and Amran, M.A. (2011) Decision criteria for selecting main contractors in Malaysia. Research Journal of Applied Sciences, Engineering and Technology, 3 (12). pp. 1358-1365. ISSN 20407459

Ismail Hossain, M. and Babaa, M.-R. and El-Harbawi, M. and Man, Z. and Hefter, G. and Yin, C.-Y. (2011) Synthesis, characterization, physical properties, and cytotoxicities of 1-(6-hydroxyhexyl)-3-alkylimidazolium chloride ionic liquids. Journal of Chemical and Engineering Data, 56 (11). pp. 4188-4193. ISSN 00219568

Ismail, I. and Shafquet, A. and Karsiti, M.N. (2011) Void fraction estimation by using electrical Capacitance tomography and differential pressure in an air-water co-current bubble column. Australian Journal of Basic and Applied Sciences, 5 (11). pp. 1533-1541. ISSN 19918178

Idrus, A. and Muqeem, S. and Zakaria, S.B. and Mohamad Nawi, M.N.B. (2011) Development of production Rates Database for substructure activities by Work sampling. Modern Applied Science, 5 (4). pp. 123-128. ISSN 19131844

Ibrahim, R. and Oxley, A. (2011) Assessing the use of mash-ups in higher education. Communications in Computer and Information Science, 179 CC (PART 1). pp. 278-291. ISSN 18650929

Ibrahim, N.M. and Hassan, M.F. and Balfagih, Z. (2011) Agent-based MOM for cross-platform communication WorkFlow management in SOA systems. Communications in Computer and Information Science, 189 CC (PART 2). pp. 280-288. ISSN 18650929

Ishmanov, F. and Malik, A.S. and Kim, S.W. (2011) Energy consumption balancing (ECB) issues and mechanisms in wireless sensor networks (WSNs): A comprehensive overview. European Transactions on Telecommunications, 22 (4). pp. 151-167. ISSN 1124318X

Imran, M. and Said, A.M. and Younis, M. and Hasbullah, H. (2011) Application-centric connectivity restoration algorithm for wireless sensor and actor networks. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 6646 L. pp. 243-253. ISSN 03029743

Ibrahim, I. and Abidm, K.A.Z. and Zainuddin, A. and Kamaruddin, T.N.A.T. (2011) Experimental study of exhaust configurations on the diesel engine performance. Journal of Applied Sciences, 11 (10). pp. 1872-1876. ISSN 18125654

Ibrahim, A.A. and Aziz, A.R.A. and Abidin, E.Z.B.Z. and Saiful, Z.A. (2011) The operation of free piston linear generator engine using MOSFET and IGBT drivers. Journal of Applied Sciences, 11 (10). pp. 1791-1796. ISSN 18125654

Iffa, E.D. and Aziz, A.R.A. and Malik, A.S. (2011) Gas flame temperature measurement using background oriented schlieren. Journal of Applied Sciences, 11 (9). pp. 1658-1662. ISSN 18125654

Idrus, A. and Fadhil Nuruddin, M. and Rohman, M.A. (2011) Development of project cost contingency estimation model using risk analysis and fuzzy expert system. Expert Systems with Applications, 38 (3). pp. 1501-1508. ISSN 09574174

Iffa, E.D. and Aziz, A.R.A. and Malik, A.S. (2011) Velocity field measurement of a round jet using quantitative schlieren. Applied Optics, 50 (5). pp. 618-625. ISSN 1559128X

Ibrahim, M.N. and Mahamad, S. and Wei, E.C.N. (2011) Mobile learning: An application prototype for AVL tree learning object. Applied Mechanics and Materials, 39. pp. 176-181. ISSN 16609336

Ismail Hossain, M. and Samir, B.B. and El-Harbawi, M. and Masri, A.N. and Abdul Mutalib, M.I. and Hefter, G. and Yin, C.-Y. (2011) Development of a novel mathematical model using a group contribution method for prediction of ionic liquid toxicities. Chemosphere, 85 (6). pp. 990-994. ISSN 00456535

Inayat, A. and Ahmad, M.M. and Abdul Mutalib, M.I. and Yusup, S. (2011) Heat integration analysis of gasification process for hydrogen production from oil palm empty fruit bunch. Chemical Engineering Transactions, 25. pp. 971-976. ISSN 22839216

Ismail Hossain, M. and El-Harbawi, M. and Noaman, Y.A. and Bustam, M.A.B. and Alitheen, N.B.M. and Affandi, N.A. and Hefter, G. and Yin, C.-Y. (2011) Synthesis and anti-microbial activity of hydroxylammonium ionic liquids. Chemosphere, 84 (1). pp. 101-104. ISSN 00456535

J

Jumail and Rambli, D.R.A. and Sulaiman, S. (2011) Investigating the roles of assistance in a digital storytelling authoring system. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7067 L (PART 2). pp. 205-216. ISSN 03029743

Johan, N.A. and Kutty, S.R.M. and Isa, M.H. and Muhamad, N.S. and Hashim, H. (2011) Adsorption of copper by using Microwave Incinerated Rice Husk Ash (MIRHA). World Academy of Science, Engineering and Technology, 80. pp. 1164-1168. ISSN 2010376X

Jehangir, M. and Dominic, P.D.D. and Downe, A.G. and Naseebullah (2011) Technology resources and E-commerce impact on business performance. Communications in Computer and Information Science, 189 CC (PART 2). pp. 440-447. ISSN 18650929

Jesbains, K. and Faiz, A. and Yussof Megat, P.S.M. and Sami, U. (2011) The study of bonding mechanism of expandable graphite based intumescent coating. Research Journal of Chemistry and Environment, 15 (2). pp. 401-405. ISSN 09720626

Jaafar, A. and Poole, R.J. (2011) Drag reduction of biopolymer flows. Journal of Applied Sciences, 11 (9). pp. 1544-1551. ISSN 18125654

Jehangir, M. and Dominic, P.D.D. and Naseebullah and Khan, A. (2011) Towards digital economy: The development of ICT and E-commerce in Malaysia. Modern Applied Science, 5 (2). pp. 171-178. ISSN 19131844

K

Khor, C.S. and Qi Yeoh, X. and Shah, N. (2011) Optimal design of petroleum refinery topology using a discrete optimization approach with logical constraints. Journal of Applied Sciences, 11 (21). pp. 3571-3578. ISSN 18125654

Kazemitabar, H. and Md. Said, A. (2011) Capacity analysis of G.711 and G.729 codec for VoIP over 802.11b WLANs. Communications in Computer and Information Science, 253 CC (PART 3). pp. 519-529. ISSN 18650929

Kausar, N. and Belhaouari Samir, B. and Abdullah, A. and Ahmad, I. and Hussain, M. (2011) A review of classification approaches using support vector machine in intrusion detection. Communications in Computer and Information Science, 253 CC (PART 3). pp. 24-34. ISSN 18650929

Khor, C.S. and Foo, D.C.Y. and El-Halwagi, M.M. and Tan, R.R. and Shah, N. (2011) A superstructure optimization approach for membrane separation-based water regeneration network synthesis with detailed nonlinear mechanistic reverse osmosis model. Industrial and Engineering Chemistry Research, 50 (23). pp. 13444-13456. ISSN 08885885

Khan, M. and Sulaiman, S. and Tahir, M. and Said, A.M. (2011) Domain-based classification of CSCW systems. Research Journal of Applied Sciences, Engineering and Technology, 3 (11). pp. 1315-1319. ISSN 20407459

Koziol, K. and Boskovic, B.O. and Yahya, N. (2011) Synthesis of carbon nanostructures by CVD method. Advanced Structured Materials, 5. pp. 23-49. ISSN 18698433

Kaur, J. and Ahmad, F. and Megat-Yusoff, P.S.M. (2011) The effect on adhesion bonding of expandable graphite based intumescent coating using zinc borate filler. Malaysian Journal of Microscopy, 7 (1). pp. 196-202. ISSN 18237010

Kashif, M. and Akhtar, M.N. and Nasir, N. and Yahya, N. (2011) Versatility of ZnO nanostructures. Advanced Structured Materials, 5. pp. 219-244. ISSN 18698433

Kakooei, S. and Hamnabard, Z. and Rahimi, R.A. and Hamidi, A. (2011) The influence of heat treatment on microstructural and physical properties of silicate glasses with high-content lead oxide. Journal of Engineering and Applied Sciences, 6 (5). pp. 304-312. ISSN 1816949X

Khir, M.H.M. and Qu, P. and Qu, H. (2011) A low-cost CMOS-MEMS piezoresistive accelerometer with large proof mass. Sensors, 11 (8). pp. 7892-7907. ISSN 14248220

Khairy, H. and Tn. Harith, Z.Z. (2011) Influence of pore geometry, pressure and partial water saturation to electrical properties of reservoir rock: Measurement and model development. Journal of Petroleum Science and Engineering, 78 (3-4). pp. 687-704. ISSN 09204105

Kamat, D. and Saaid, I.M. and Dzulkarnain, I. (2011) Comparative characterization study of Malaysian sand as proppant. World Academy of Science, Engineering and Technology, 81. pp. 137-142. ISSN 2010376X

Khattak, Z.A. and Manan, J.-L.A. and Sulaiman, S. (2011) Finding new solutions for services in federated open systems interconnection. Communications in Computer and Information Science, 193 CC (PART 4). pp. 250-259. ISSN 18650929

Knothe, G. and Rashid, U. and Yusup, S. and Anwar, F. (2011) Fatty acids of Thespesia populnea: Mass spectrometry of picolinyl esters of cyclopropene fatty acids. European Journal of Lipid Science and Technology, 113 (8). pp. 980-984. ISSN 14387697

Khan, A. and Baharudin, B. and Khan, K. (2011) Sentiment classification from online customer reviews using lexical contextual sentence structure. Communications in Computer and Information Science, 179 CC (PART 1). pp. 317-331. ISSN 18650929

Khan, Z. and Yusup, S. and Murni Melati, A. and Ramli, A. and Mohammad Taufiq, A. and Sharifah Shahidah, A. and Mas Fatiha, M. and Shi Eda, E.M. and Inayat, A. (2011) Effect of steam and catalyst on palm oil wastes thermal decomposition for hydrogen production. Research Journal of Chemistry and Environment, 15 (2). pp. 466-472. ISSN 09720626

Kamil, R.N.M. and Yusup, S. and Rashid, U. (2011) Optimization of polyol ester production by transesterification of Jatropha-based methyl ester with trimethylolpropane using Taguchi design of experiment. Fuel, 90 (6). pp. 2343-2345. ISSN 00162361

Kurnia, K.A. and Mutalib, M.I.A. and Ariwahjoedi, B. (2011) Estimation of physicochemical properties of ionic liquids H 2N-C2mimBF4 and H2N-C 3mimBF4. Journal of Chemical and Engineering Data, 56 (5). pp. 2557-2562. ISSN 00219568

Kumar, G.S. and Nagarajan, T. (2011) Reconfigurable stewart platform for spiral contours. Journal of Applied Sciences, 11 (9). pp. 1552-1558. ISSN 18125654

Krishna, S. and Nagarajan, T. and Rani, A.M.A. (2011) Review of current development of pneumatic artificial muscle. Journal of Applied Sciences, 11 (10). pp. 1749-1755. ISSN 18125654

Kurnia, K.A. and Mutalib, M.I.A. and Murugesan, T. and Ariwahjoedi, B. (2011) Physicochemical properties of binary mixtures of the protic ionic liquid bis(2-hydroxyethyl)methylammonium formate with methanol, ethanol, and 1-propanol. Journal of Solution Chemistry, 40 (5). pp. 818-831. ISSN 00959782

Kamel, N. and Yusoff, M.Z. and Hani, A.F.M. (2011) Single-trial subspace-based approach for VEP extraction. IEEE Transactions on Biomedical Engineering, 58 (5). pp. 1383-1393. ISSN 00189294

Kashif, M. and Yahya, N. and Zaid, H.M. and Shafie, A. and Jasamai, M. and Nasir, N. and Akhter, M.N. (2011) Oil recovery by using electromagnetic waves. Journal of Applied Sciences, 11 (7). pp. 1366-1370. ISSN 18125654

Karim, S.A.A. and Razali, R. (2011) A proposed mathematical model of influenza A, H1N1 for Malaysia. Journal of Applied Sciences, 11 (7). pp. 1457-1460. ISSN 18125654

Karim, S.A.A. and Karim, B.A. and Ismail, M.T. and Hasan, M.K. and Sulaiman, J. (2011) Application of wavelet method in stock exchange problem. Journal of Applied Sciences, 11 (7). pp. 1331-1335. ISSN 18125654

Kermany, A.R. and Mohamed, N.M. and Singh, B. (2011) Characterization of aligned MWCNTs array as the sensing element for ionization gas sensor. Journal of Applied Sciences, 11 (7). pp. 1243-1248. ISSN 18125654

Kurnia, K.A. and Taib, M.M. and Abdul Mutalib, M.I. and Murugesan, T. (2011) Densities, refractive indices and excess molar volumes for binary mixtures of protic ionic liquids with methanol at T = 293.15 to 313.15 K. Journal of Molecular Liquids, 159 (3). pp. 211-219. ISSN 01677322

Kurnia, K.A. and Ariwahjoedi, B. and Mutalib, M.I.A. and Murugesan, T. (2011) Density and excess molar volume of the protic ionic liquid bis(2-hydroxyethyl)ammonium acetate with alcohols. Journal of Solution Chemistry, 40 (3). pp. 470-480. ISSN 00959782

Kurnia, K.A. and Mutalib, M.I.A. (2011) Densities and viscosities of binary mixture of the ionic liquid bis(2-hydroxyethyl)ammonium propionate with methanol, ethanol, and 1-propanol at T = (293.15, 303.15, 313.15, and 323.15) K and at P = 0.1 MPa. Journal of Chemical and Engineering Data, 56 (1). pp. 79-83. ISSN 00219568

Khuzaimah, N. and Nour, U.M. and Maitra, S. (2011) Removal of nickel ion from aqueous solution using Rambai stem (Baccaurea motleyana) adsorbent. Journal of environmental science & engineering, 53 (3). pp. 257-262.

Khan, T. and Chaudhuri, M. (2011) Comparison of adsorption behaviour of coconut coir activated carbon and commercial activated carbon for textile dye. WIT Transactions on Ecology and the Environment, 148. pp. 105-116. ISSN 17433541

Kutty, S.R.M. and Ngatenah, S.N.I. and Isa, M.H. (2011) Removal of TSS, turbidity, colour, Zn(II) and Cu(II) from synthetic wastewater using FCC and FSC, generated from groundwater treatment plant sludge (GWTPS). WIT Transactions on Ecology and the Environment, 148. pp. 53-64. ISSN 17433541

Kutty, S.R.M. and Gasim, H.A. and Khamaruddin, P.F. and Malakahmad, A. (2011) Biological treatability study for refinery wastewater using bench scale sequencing batch reactor systems. WIT Transactions on Ecology and the Environment, 145. pp. 691-699. ISSN 17433541

Khairy, H. and Tn.Harith, Z.Z. (2011) Interfacial, pore geometry and saturation effect on complex resistivity of shaly sandstone: Dispersion and laboratory investigation. Geosciences Journal, 15 (4). pp. 395-415. ISSN 12264806

Khan, A. and Baharudin, B. and Khan, K. (2011) Mining customer data for decision making using new hybrid classification algorithm. Journal of Theoretical and Applied Information Technology, 27 (1). pp. 54-61. ISSN 19928645

L

Lawal, D.U. and Matori, A.-N. and Hashim, A.M. and Chandio, I.A. and Sabri, S. and Balogun, A.-L. and Abba, H.A. (2011) Geographic information system and remote sensing applications in flood hazards management: A review. Research Journal of Applied Sciences, Engineering and Technology, 3 (9). pp. 933-947. ISSN 20407459

Latif, N.A. and Hassan, Mohd.F. and Hasan, Mohd.H. (2011) Formal verification for interaction protocol in agent-based e-learning system using model checking toolkit - MCMAS. Communications in Computer and Information Science, 180 CC (PART 2). pp. 412-426. ISSN 18650929

Lawal, D.U. and Matori, A.-N. and Balogun, A.-L. (2011) A Geographic information system and multi-criteria decision analysis in proposing new recreational park sites in Universiti Teknologi Malaysia. Modern Applied Science, 5 (3). pp. 39-55. ISSN 19131844

Lad, N. and Aroussi, A. and Said, M.F.M. (2011) Droplet size measurement for liquid spray using digital image analysis technique. Journal of Applied Sciences, 11 (11). pp. 1966-1972. ISSN 18125654

Lubis, A.M.H.S. and Sudin, M.B. and Anwahjoedi, B. (2011) Investigation of worn surface characteristics of steel influenced by jatropha oil as lubricant and eco-friendly lubricant substituent. Journal of Applied Sciences, 11 (10). pp. 1797-1802. ISSN 18125654

Ling, C.K. and Zabidi, N.A.M. and Mohan, C. (2011) Synthesis and characterization of silica-supported cobalt nanocatalysts using strong electrostatic adsorption. Journal of Applied Sciences, 11 (7). pp. 1436-1440. ISSN 18125654

Liew, M.S. and Shamsuddin, A.H. and Yew, G.Z. (2011) Fiber resin matrix composites: Nature's gift. WIT Transactions on Ecology and the Environment, 148. pp. 131-140. ISSN 17433541

Lateef, O.A. and Khamidi, M.F. and Idrus, A. (2011) Structures of maintenance organisations in Malaysian universities. International Journal of Business Excellence, 4 (5). pp. 573-594. ISSN 17560047

Lad, N. and Aroussi, A. and Adebayo, D. (2011) Measurement of near wall fluid interaction with an atomised spray. Journal of Applied Sciences, 11 (10). pp. 1851-1856. ISSN 18125654

M

Mesfin Yeneneh, A. and Maitra, S. and Eldemerdash, U. (2011) Study on biosorption of heavy metals by modified lignocellulosic waste. Journal of Applied Sciences, 11 (21). pp. 3555-3562. ISSN 18125654

Matcha, W. and Awang Rambli, D.R. (2011) Preliminary investigation on the use of augmented reality in collaborative learning. Communications in Computer and Information Science, 254 CC (PART 4). pp. 189-198. ISSN 18650929

Matayong, S. and Bin Mahmood, A.K. (2011) A process model of KMS adoption and diffusion in organization: An exploratory study. Communications in Computer and Information Science, 253 CC (PART 3). pp. 294-305. ISSN 18650929

Mahinder Singh, B.S. (2011) Nanotechnology in solar hydrogen production. Advanced Structured Materials, 5. pp. 263-280. ISSN 18698433

Mohd Zabidi, N.A. (2011) Supported nanoparticles for fuel synthesis. Advanced Structured Materials, 5. pp. 245-262. ISSN 18698433

Majid, M.A.A. and Nasir, M. (2011) Multi-state system availability model of electricity generation for a cogeneration district cooling plant. Asian Journal of Applied Sciences, 4 (4). pp. 431-438. ISSN 19963343

Masrom, S. and Abidin, S.Z.Z. and Hashimah, P.N. and Abd. Rahman, A.S. (2011) Towards rapid development of user defined metaheuristics hybridization. International Journal of Software Engineering and its Applications, 5 (2). pp. 1-12. ISSN 17389984

Mohyaldin, M.E. and Elkhatib, N. and Ismail, M.C. (2011) Coupling norsok CO2 corrosion prediction model with pipelines thermal/hydraulic models to simulate CO2 corrosion along pipelines. Journal of Engineering Science and Technology, 6 (6). pp. 709-719. ISSN 18234690

Mellon, N. and Shariff, A.M. (2011) Performance assessment of an inline horizontal swirl tube cyclone for gas-liquid separation at high pressure. Journal of Natural Gas Chemistry, 20 (6). pp. 565-567. ISSN 10039953

Mohajeri, S. and Aziz, H.A. and Zahed, M.A. and Mohajeri, L. and Bashir, M.J.K. and Aziz, S.Q. and Adlan, M.N. and Isa, M.H. (2011) Multiple responses analysis and modeling of Fenton process for treatment of high strength landfill leachate. Water Science and Technology, 64 (8). pp. 1652-1660. ISSN 02731223

Minh, V.T. and Hashim, F.B.M. (2011) Tracking setpoint robust model predictive control for input saturated and softened state constraints. International Journal of Control, Automation and Systems, 9 (5). pp. 958-965. ISSN 15986446

Murshid, G. and Shariff, A.M. and Lau, K.K. and Bustam, M.A. and Ahmad, F. (2011) Physical properties and thermal decomposition of aqueous solutions of 2-amino-2-hydroxymethyl-1, 3-propanediol (AHPD). International Journal of Thermophysics, 32 (10). pp. 2040-2049. ISSN 0195928X

Muhammad, N. and Man, Z. and Bustam, M.A. and Mutalib, M.I.A. and Wilfred, C.D. and Rafiq, S. (2011) Dissolution and delignification of bamboo biomass using amino acid-based ionic liquid. Applied Biochemistry and Biotechnology, 165 (3-4). pp. 998-1009. ISSN 02732289

Majumdar, S. and Kargupta, K. and Ganguly, S. and Ray, P. (2011) Studies on the performance of the conducting polymer-based molecular release system. Polymer Engineering and Science, 51 (10). pp. 2001-2012. ISSN 00323888

Mushtaq, A. and Sulaiman, S.B. and Dominic, P.D.D. and Riaz, S. (2011) A qualitative enquiry to explore the concept of users' perception on factors influencing flexible traveling behavior and flexible online airline reservation systems. Communications in Computer and Information Science, 194 CC. pp. 739-753. ISSN 18650929

Mustafa, M.R. and Isa, M.H. and Rezaur, R.B. (2011) A comparison of artificial neural networks for prediction of suspended sediment discharge in river-a case study in Malaysia. World Academy of Science, Engineering and Technology, 81. pp. 372-376. ISSN 2010376X

Montasir, O.A. and Kurian, V.J. (2011) Effect of slowly varying drift forces on the motion characteristics of truss spar platforms. Ocean Engineering, 38 (13). pp. 1417-1429. ISSN 00298018

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. and Firmansyah (2011) The effects of fuel-injection timing at medium injection pressure on the engine characteristics and emissions of a CNG-DI engine fueled by a small amount of hydrogen in CNG. International Journal of Hydrogen Energy, 36 (18). pp. 11997-12006. ISSN 03603199

Malik, A.S. and Song, T.L. and Choi, T.-S. (2011) Depth map estimation based on linear regression using image focus. International Journal of Imaging Systems and Technology, 21 (3). pp. 241-246. ISSN 08999457

Man, Z. and Muhammad, N. and Sarwono, A. and Bustam, M.A. and Kumar, M.V. and Rafiq, S. (2011) Preparation of Cellulose Nanocrystals Using an Ionic Liquid. Journal of Polymers and the Environment, 19 (3). pp. 726-731. ISSN 15662543

Mohammadpour, E. and Awang, M. (2011) Predicting the nonlinear tensile behavior of carbon nanotubes using finite element simulation. Applied Physics A: Materials Science and Processing, 104 (2). pp. 609-614. ISSN 09478396

Memon, F.A. and Nuruddin, M.F. and Demie, S. and Shafiq, N. (2011) Effect of curing conditions on strength of fly ash-based self-compacting geopolymer concrete. World Academy of Science, Engineering and Technology, 80. pp. 860-863. ISSN 2010376X

Matayong, S. and Bin Mahmood, A.K. (2011) The grounded process of KMS adoption: The case study of knowledge sharing and CoPs in oil and gas industry in Malaysia. Communications in Computer and Information Science, 180 CC (PART 2). pp. 167-176. ISSN 18650929

Mughal, B.M. and Wagan, A.A. and Hasbullah, H. (2011) Impact of safety beacons on the performance of vehicular ad hoc networks. Communications in Computer and Information Science, 181 CC (PART 3). pp. 368-383. ISSN 18650929

Mehmood Shah, S.N. and Bin Mahmood, A.K. and Oxley, A. (2011) Dynamic multilevel dual queue scheduling algorithms for grid computing. Communications in Computer and Information Science, 179 CC (PART 1). pp. 425-440. ISSN 18650929

Mohamud Sharif, A. and Basri, S. (2011) Software risk assessment: A review on small and medium software projects. Communications in Computer and Information Science, 180 CC (PART 2). pp. 214-224. ISSN 18650929

Mohd. Yusoff, S.K. and Md. Said, A. and Ismail, I. (2011) Optimal camera placement for 3D environment. Communications in Computer and Information Science, 180 CC (PART 2). pp. 448-459. ISSN 18650929

Mat Using, S.N. and Ahmad, R. and Mohd. Taib, S. (2011) Ontology development for programming related materials. Communications in Computer and Information Science, 181 CC (PART 3). pp. 291-305. ISSN 18650929

Mehmood Shah, S.N. and Bin Mahmood, A.K. and Oxley, A. (2011) SYEDWSIM: A web based simulator for grid workload analysis. Communications in Computer and Information Science, 181 CC (PART 3). pp. 677-692. ISSN 18650929

Mahamat Pierre, D. and Zakaria, N. (2011) Genetic algorithm approach to path planning for intelligent camera control for scientific visualization. Communications in Computer and Information Science, 180 CC (PART 2). pp. 205-213. ISSN 18650929

Malakahmad, A. and Hasani, A. and Eisakhani, M. and Isa, M.H. (2011) Sequencing Batch Reactor (SBR) for the removal of Hg2+ and Cd2+ from synthetic petrochemical factory wastewater. Journal of Hazardous Materials, 191 (1-3). pp. 118-125. ISSN 03043894

Muhammad, N. and Man, Z.B. and Bustam, M.A. and Mutalib, M.I.A. and Wilfred, C.D. and Rafiq, S. (2011) Synthesis and thermophysical properties of low viscosity amino acid-based ionic liquids. Journal of Chemical and Engineering Data, 56 (7). pp. 3157-3162. ISSN 00219568

Mustapha, M. and Mustapha, F. and Mamat, O. and Hussain, P. (2011) Fabrication of aluminium foam through pressure assisted high frequency induction heated sintering dissolution process: An experimental observation. Powder Metallurgy, 54 (3). pp. 343-353. ISSN 00325899

Mushtaq, A. and Sulaiman, S.B. and Dominic, P.D.D. and Riaz, S. and Tawab Khalil, M.A. (2011) A study to examine if integration of OTAs features can make SBTs more flexible online airline reservation systems. Information Technology Journal, 10 (7). pp. 1315-1324. ISSN 18125638

Minh, V.T. and Hashim, F.B.M. (2011) Time forward observer based adaptive controller for a teleoperation system. International Journal of Control, Automation and Systems, 9 (3). pp. 470-477. ISSN 15986446

Murshid, G. and Mohd, S.A. and Kok, K.L. and Azmi, B.M. and Faizan, A. (2011) Thermophysical analysis of aqueous solutions of 2-amino-2-hydroxymethyl-1, 3-propanediol (Potential CO 2 Removal Solvent from Gaseous Streams). Research Journal of Chemistry and Environment, 15 (2). pp. 819-822. ISSN 09720626

Muqeem, S. and Idrus, A. and Khamidi, M.F. and Bin Ahmad, J. and Bin Zakaria, S. (2011) Construction labor production rates modeling using artificial neural network. Electronic Journal of Information Technology in Construction, 16. pp. 713-726. ISSN 14036835

Muhammad, A. and Mutalib, M.I.A. and Murugesan, T. and Man, Z. and Bustam, A. (2011) Density and viscosity estimation of l-hexyl-3-methyl imidazolium based ionic liquids with BF4 and PF6 anions at high pressures. Journal of Applied Sciences, 11 (13). pp. 2452-2455. ISSN 18125654

Murshid, G. and Shariff, A.M. and Keong, L.K. and Bustam, M.A. (2011) Physical properties of aqueous solutions of piperazine and (2-amino-2-methyl-1-propanol + piperazine) from (298.15 to 333.15) K. Journal of Chemical and Engineering Data, 56 (5). pp. 2660-2663. ISSN 00219568

Majid, M.A.A. and Muhammad, M. and Yem, N.I.Y. (2011) RCM Analysis of Process Equipment: A Case Study on Heat Exchangers. Journal of Applied Sciences, 11 (11). pp. 2058-2062. ISSN 18125654

Mokhlif, N.D. and Al-kayiem, H.H. (2011) Modeling of the waxing-dewaxing process in scraped surface exchangers. Journal of Applied Sciences, 11 (9). pp. 1594-1599. ISSN 18125654

Mahamat, A.T.Z. and Rani, A.M.A. and Husain, P. (2011) Machining of cemented tungsten carbide using EDM. Journal of Applied Sciences, 11 (10). pp. 1784-1790. ISSN 18125654

Mohammadpour, E. and Awang, M. and Abdullah, M.Z. (2011) Predicting the Young's modulus of single-walled carbon nanotubes using finite element modeling. Journal of Applied Sciences, 11 (9). pp. 1653-1657. ISSN 18125654

Mohammed, S.E. and Iffa, E.D. and Baharom, M.B. and Aziz, A.R.A. (2011) Spray characteristic comparisons of compressed natural gas and hydrogen fuel using digital imaging. Journal of Applied Sciences, 11 (9). pp. 1624-1629. ISSN 18125654

Muhammad, M. and Amin Abd Majid, M. (2011) Reliability and availability evaluation for a multi-state system subject to minimal repair. Journal of Applied Sciences, 11 (11). pp. 2036-2041. ISSN 18125654

Megat-Yusoff, P.S.M. and Latif, M.R.A. and Ramli, M.S. (2011) Optimizing injection molding processing parameters for enhanced mechanical performance of oil palm empty fruit bunch high density polyethylene composites. Journal of Applied Sciences, 11 (9). pp. 1618-1623. ISSN 18125654

Mokhtar, A.A. and Ismail, M.C. (2011) Probabilistic reliability assessment of an insulated piping in the presence of corrosion defects. Journal of Applied Sciences, 11 (11). pp. 2063-2067. ISSN 18125654

Mohamed, N.M. and Kou, L.M. (2011) Piezoresistive effect of aligned multiwalled carbon nanotubes array. Journal of Applied Sciences, 11 (7). pp. 1386-1390. ISSN 18125654

Mastan, A.A.K. and Ahmedullah, S.S. and Mohamed, N.M. (2011) The effects of hydrothermal growth parameters on titanium dioxide nanomaterial. Journal of Applied Sciences, 11 (7). pp. 1267-1272. ISSN 18125654

Mohamed, N.M. and Kou, L.M. (2011) Sandwich growth of aligned carbon nanotubes array using thermal chemical vapor deposition method. Journal of Applied Sciences, 11 (7). pp. 1341-1345. ISSN 18125654

Malakahmad, A. and Ezlin, A.B.N. and Shahrom, M.Z. (2011) Study on performance of a modified anaerobic baffled reactor to treat high strength wastewater. Journal of Applied Sciences, 11 (7). pp. 1449-1452. ISSN 18125654

Mohajeri, L. and Aziz, H.A. and Zahed, M.A. and Mohajeri, S. and Kutty, S.R.M. and Isa, M.H. (2011) Response surface analysis and modeling of n-alkanes removal through bioremediation of weathered crude oil. Water Science and Technology, 63 (4). pp. 618-626. ISSN 02731223

Mohammed, S.E.L. and Baharom, M.B. and Aziz, A.R.A. (2011) Analysis of engine characteristics and emissions fueled by in-situ mixing of small amount of hydrogen in CNG. International Journal of Hydrogen Energy, 36 (6). pp. 4029-4037. ISSN 03603199

Malik, A.S. and Nisar, H. and Choi, T.-S. (2011) A Fuzzy-Neural approach for estimation of depth map using focus. Applied Soft Computing Journal, 11 (2). pp. 1837-1850. ISSN 15684946

Mukhtar, M.A.O. and Abdullah, A. and Downe, A.G. (2011) Behavior model mapping and transformation using model-driven architecture. World Academy of Science, Engineering and Technology, 50. pp. 487-490. ISSN 2010376X

Mukhtar, M.A.O. and Abdullah, A. and Downe, A.G. (2011) Behavior model mapping and transformation using model-driven architecture. World Academy of Science, Engineering and Technology, 74. pp. 492-495. ISSN 2010376X

Minh, V.T. and Awang, M. and Parman, S. (2011) Conditions for stabilizability of linear switched systems. International Journal of Control, Automation and Systems, 9 (1). pp. 139-144. ISSN 15986446

Muhamad Amin, A.H. and Khan, A.I. (2011) Distributed multi-feature recognition scheme for greyscale images. Neural Processing Letters, 33 (1). pp. 45-59. ISSN 13704621

Mohammod, M. and Sen, T.K. and Maitra, S. and Dutta, B.K. (2011) Removal of Zn2+ from aqueous solution using castor seed hull. Water, Air, and Soil Pollution, 215 (1-4). pp. 609-620. ISSN 00496979

Mahamad, S. and Taib, S.M. and Ibrahim, M.N. (2011) Analyzing speed accuracy trade-off in control movement mechanism with error enforcement. Applied Mechanics and Materials, 39. pp. 169-175. ISSN 16609336

Muhamad Amin, A.H. and Khan, A.I. (2011) Spatio-temporal forest fire detection using a distributed hierarchical graph neuron within an integrated wireless sensor network-grid environment. Civil-Comp Proceedings, 95. ISSN 17593433

Minh, V.T. and Afzulpurkar, N. and Wan Muhamad, W.M. (2011) Fault detection model-based controller for process systems. Asian Journal of Control, 13 (3). pp. 382-397. ISSN 15618625

Muhammad, N. and Maitra, S. and Ul Haq, I. and Farooq, M. (2011) Some studies on the wear resistance of artificial teeth in presence of amorphous SiO2 and TiO2 fillers. Ceramica, 57 (343). pp. 324-328. ISSN 03666913

Malladi, S. and Dominic, P.D.D. and Kamil, A. (2011) Lean principles in IT services: A case study on implementation and best practices. International Journal of Business Information Systems, 8 (3). pp. 247-268. ISSN 17460972

Murshid, G. and Shariff, A.M. and Keong, L.K. and Bustam, M.A. (2011) Thermo physical analysis of 2-amino-2-methyl-lpropanol solvent for carbon dioxide removal. Chemical Engineering Transactions, 25. pp. 45-50. ISSN 22839216

N

Nafsun, A.I. and Yusoff, N. (2011) Effect of model-plant mismatch on MPC controller performance. Journal of Applied Sciences, 11 (21). pp. 3579-3585. ISSN 18125654

Nazir, B. and Hasbullah, H. and Madani, S.A. (2011) Sleep/wake scheduling scheme for minimizing end-to-end delay in multi-hop wireless sensor networks. Eurasip Journal on Wireless Communications and Networking, 2011 (1). ISSN 16871472

Nasrifar, K. and Fani Kheshty, M. (2011) Effect of pressure on the solid-liquid equilibria of synthetic paraffin mixtures using predictive methods. Fluid Phase Equilibria, 310 (1-2). pp. 111-119. ISSN 03783812

Nuruddin, M.F. and Demie, S. and Shafiq, N. (2011) Effect of mix composition on workability and compressive strength of self-compacting geopolymer concrete. Canadian Journal of Civil Engineering, 38 (11). pp. 1196-1203. ISSN 03151468

Narahari, M. and Yunus Nayan, M. (2011) Free convection flow past an impulsively started infinite vertical plate with Newtonian heating in the presence of thermal radiation and mass diffusion. Turkish Journal of Engineering and Environmental Sciences, 35 (3). pp. 187-198. ISSN 13000160

Narahari, M. and Dutta, B.K. (2011) Free convection flow and heat transfer between two vertical parallel plates with variable temperature at one boundary. Acta Technica CSAV (Ceskoslovensk Akademie Ved), 56 (1). pp. 103-113. ISSN 00017043

Nawshad, M. and Zakaria, M. and Mohamad, A.B. and Wilfred, C.D. and Abdul, M.M.I. and Rafiq, S. (2011) Thermophysical properties of some amino acid-based ionic liquids. Research Journal of Chemistry and Environment, 15 (2). pp. 772-778. ISSN 09720626

Naveenchandran, P. and Al-Khairi, N. and Shahzad, R. and Aziz, A.R.A. (2011) Effect of exhaust gas recirculation on the dual fuel combustion of gasoline and CNG by compression ignition. Journal of Applied Sciences, 11 (11). pp. 2030-2035. ISSN 18125654

Nanimina, A.M. and Abdul-Rani, A.M. and Ahmad, F. and Zainuddin, A. and Jason Lo, S.H. (2011) Effects of electro-discharge machining on aluminium metal matrix composite. Journal of Applied Sciences, 11 (9). pp. 1668-1672. ISSN 18125654

Narahari, M. and Ishak, A. (2011) Radiation effects on free convection flow near a moving vertical plate with newtonian heating. Journal of Applied Sciences, 11 (7). pp. 1096-1104. ISSN 18125654

Nasir, N.A.M. and Zabidi, N.A.M. and Kait, C.F. (2011) Synthesis and characterization of silica-supported iron nanocatalyst by modified colloidal method. Journal of Applied Sciences, 11 (7). pp. 1391-1395. ISSN 18125654

Nourain, N. and Samir, B.B. (2011) Statistical model and wavelet function for face recognition. Journal of Applied Sciences, 11 (7). pp. 1213-1218. ISSN 18125654

Nasir, N. and Yahya, N. and Akhtar, M.N. and Kashif, M. and Shafie, A. and Daud, H. and Zaid, H.M. (2011) Magnitude verses offset study with EM transmitter in different resistive medium. Journal of Applied Sciences, 11 (7). pp. 1309-1314. ISSN 18125654

Nuruddin, M.F. and Demie, S. and Ahmed, M.F. and Shafiq, N. (2011) Effect of superplasticizer and NaOH molarity on workability, compressive strength and microstructure properties of self-compacting geopolymer concrete. World Academy of Science, Engineering and Technology, 51. pp. 907-914. ISSN 2010376X

Nasir, N. and Yahya, N. and Kashif, M. and Daud, H. and Akhtar, M.N. and Zaid, H.M. and Shafie, A. and Teng, L.C. (2011) Observation of a cubical-like microstructure of strontium iron garnet and yttrium iron garnet prepared via sol-gel technique. Journal of Nanoscience and Nanotechnology, 11 (3). pp. 2551-2554. ISSN 15334880

Nordin, M.I. and Abdullah, A. and Hassan, M.I. (2011) Goal-based request cloud resource broker in medical application. World Academy of Science, Engineering and Technology, 50. pp. 769-773. ISSN 2010376X

Nordin, M.I. and Abdullah, A. and Hassan, M.I. (2011) Goal-based request cloud resource broker in medical application. World Academy of Science, Engineering and Technology, 74. pp. 770-774. ISSN 2010376X

Noran, N.K. and Naveenchandran, P. and Aziz, A.R.A. (2011) Comparison of HCCI and SI combustion of direct injected CNG at low load condition. SAE Technical Papers. ISSN 01487191

Nuruddin, M.F. and Qazi, S.A. and Kusbiantoro, A. and Shafiq, N. (2011) Utilisation of waste material in geopolymeric concrete. Proceedings of Institution of Civil Engineers: Construction Materials, 164 (6). pp. 315-327. ISSN 1747650X

Naseebullah and Bin Basri, S. and Dominic, P.D.D. and Khan, M.J. (2011) A framework of organizational E-readiness impact on E-procurement implementation. Communications in Computer and Information Science, 155 CC. pp. 240-245. ISSN 18650929

Nuruddin, M.F. and Kusbiantoro, A. and Qazi, S. and Shafiq, N. (2011) Compressive strength and interfacial transition zone characteristic of geopolymer concrete with different cast in-situ curing conditions. World Academy of Science, Engineering and Technology, 73. pp. 892-895. ISSN 2010376X

Nuruddin, M.F. and Kusbiantoro, A. and Qazi, S. and Shafiq, N. (2011) Compressive strength and interfacial transition zone characteristic of geopolymer concrete with different cast in-situ curing conditions. World Academy of Science, Engineering and Technology, 73. pp. 431-434. ISSN 2010376X

Nallagownden, P. and Mukerjee, R.N. and Masri, S. (2011) Tracing and prediction of losses for deregulated operation of power systems. European Transactions on Electrical Power, 21 (1). pp. 223-238. ISSN 1430144X

O

Olanrewaju, A.L. and Idrus, A. and Khamidi, M.F. (2011) Investigating building maintenance practices in Malaysia: A case study. Structural Survey, 29 (5). pp. 397-410. ISSN 0263080X

Olanrewaju, A.A. and Khamidi, M.F. and Idrus, A. (2011) Validation of building maintenance performance model for Malaysian universities. World Academy of Science, Engineering and Technology, 80. pp. 726-730. ISSN 2010376X

P

Puckdeepun, T. and Jaafar, J.B. and Hassan, Mohd.F.B. and Hussin, F.A.B. (2011) Investigation of collaborative interaction using ITB-based setting vs. computer-based setting. Communications in Computer and Information Science, 254 CC (PART 4). pp. 354-368. ISSN 18650929

Puspitasari, P. and Yahya, N. and Zabidi, N.A.M. and Ahmad, N.A. (2011) Comparison of mechanical properties and magnetic properties of Mn0.8Zn0.2Fe2O4 synthesized by conventional ball milling and self combustion method. Journal of Applied Sciences, 11 (7). pp. 1199-1205. ISSN 18125654

Peidro, D. and Vasant, P. (2011) Transportation planning with modified S-curve membership functions using an interactive fuzzy multi-objective approach. Applied Soft Computing Journal, 11 (2). pp. 2656-2663. ISSN 15684946

Purnomo, E.W. and Harith, Z.Z.T. (2011) Combination of minimum-maximum (m-m) attribute and zero-INTENS-difference (z-i-d) attribute for estimating seismically thin-bed thickness. ITB Journal of Engineering Science, 43 B (2). pp. 79-100. ISSN 19783051

Permanasari, A.E. and Rambli, D.R.A. and Dhanapal Durai Dominic, P. (2011) A decision support framework for a zoonosis prediction system: Case study of Salmonellosis. International Journal of Medical Engineering and Informatics, 3 (2). pp. 180-195. ISSN 17550653

Q

Qureshi, M.A. and Hassan, M.F. and Sammi, R. and Safdar, S. and Akbar, R. (2011) Shortest path tree with embedded backups - An exhaustive link failure recovery algorithm. Journal of Artificial Intelligence, 4 (2). pp. 143-155. ISSN 19945450

Qureshi, M.A. and Hassan, M.F. and Safdar, S. and Akbar, R. (2011) A framework to recover single link failure on shortest path in shortest path tree. Journal of Applied Sciences, 11 (16). pp. 2916-2923. ISSN 18125654

Qureshi, M.A. and Hassan, Mohd.F. (2011) Embedded backups for link failure recovery in shortest path trees. Communications in Computer and Information Science, 180 CC (PART 2). pp. 663-671. ISSN 18650929

R

Razali, R. and Jaafar, J. (2011) Fuzzy based approach for complaint management. Communications in Computer and Information Science, 252 CC (PART 2). pp. 386-400. ISSN 18650929

Rafiq, S. and Ahmad, F. and Man, Z. and Maitra, S. (2011) Silica-polymer nanocomposite membranes for gas separation - A review, part 2. InterCeram: International Ceramic Review, 60 (1). pp. 8-13. ISSN 00205214

Roslan, A.M.B.S. and Amirtham, V. and Nagarajan, T. and Hashim, F.M. (2011) SMA actuator technology application in Stewart Platform construction. Journal of Applied Sciences, 11 (23). pp. 3783-3790. ISSN 18125654

Roohullah and Jaafar, J. (2011) Exploiting the query expansion through knowledgebases for images. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7067 L (PART 2). pp. 93-103. ISSN 03029743

Rozyyev, A. and Hasbullah, H. and Subhan, F. (2011) Indoor child tracking in wireless sensor network using fuzzy logic technique. Research Journal of Information Technology, 3 (2). pp. 81-92. ISSN 18157432

Rafiq, S. and Man, Z. and Maitra, S. and Maulud, A. and Ahmad, F. and Muhammad, N. (2011) Preparation of asymmetric polysulfone/polyimide blended membranes for CO2 separation. Korean Journal of Chemical Engineering, 28 (10). pp. 2050-2056. ISSN 02561115

Rashid, U. and Anwar, F. and Knothe, G. (2011) Biodiesel from Milo (Thespesia populnea L.) seed oil. Biomass and Bioenergy, 35 (9). pp. 4034-4039. ISSN 09619534

Rafiq, S. and Man, Z. and Maulud, A. and Muhammad, N. and Maitra, S. (2011) Effect of varying solvents compositions on morphology and gas permeation properties on membranes blends for CO2 separation from natural gas. Journal of Membrane Science, 378 (1-2). pp. 444-452. ISSN 03767388

Rashid, U. and Anwar, F. and Ashraf, M. and Saleem, M. and Yusup, S. (2011) Application of response surface methodology for optimizing transesterification of Moringa oleifera oil: Biodiesel production. Energy Conversion and Management, 52 (8-9). pp. 3034-3042. ISSN 01968904

Rehman, M. and Mahmood, A.K. and Salleh, R. and Amin, A. (2011) Understanding motivators and de-motivators for software engineers - A case of Malaysian software engineering industry. Communications in Computer and Information Science, 181 CC (PART 3). pp. 205-214. ISSN 18650929

Riaz, S. and Awang Rambli, D.R. and Salleh, R. and Mushtaq, A. (2011) Influence of informal visual environments and informal motivational factors on learners' aesthetic expectations from formal learning visual environments. Communications in Computer and Information Science, 179 CC (PART 1). pp. 292-305. ISSN 18650929

Riaz, S. and Rambli, D.R.A. and Rohani, S. and Mushtaq, A. (2011) Exploratory factor analysis (EFA) to examine learner's aesthetic perceptions and motivation through their aesthetic-emotions in informal visual environments. Information Technology Journal, 10 (7). pp. 1268-1284. ISSN 18125638

Rahardjo, H. and Melinda, F. and Leong, E.C. and Rezaur, R.B. (2011) Stiffness of a compacted residual soil. Engineering Geology, 120 (1-4). pp. 60-67. ISSN 00137952

Raza, M.R. and Ahmad, F. and Omar, M.A. and German, R.M. (2011) Binder removal from powder injection molded 316L stainless steel. Journal of Applied Sciences, 11 (11). pp. 2042-2047. ISSN 18125654

Ramahlingam, T. and Raghavan, V.R. (2011) The tube side heat transfer coefficient for enhanced double tube by Wilson plot analysis. Journal of Applied Sciences, 11 (10). pp. 1725-1732. ISSN 18125654

Reshid, M.N. and Majid, M.A.A. (2011) A multi-state reliability model for a gas fueled cogenerated power plant. Journal of Applied Sciences, 11 (11). pp. 1945-1951. ISSN 18125654

Raza, M.R. and Ahmad, F. and Ikram, N. and Ahmad, R. and Salam, A. (2011) Development and strengthening of 2219 aluminium alloy by mechanical working and heat treatment. Journal of Applied Sciences, 11 (10). pp. 1857-1861. ISSN 18125654

Ramli, A. and Bakar, D.R.A. (2011) Effect of calcination method on the catalytic degradation of polystyrene using A12O3 supported Sn and Cd catalysts. Journal of Applied Sciences, 11 (7). pp. 1346-1350. ISSN 18125654

Rahmah, A.U. and Abdullah, M.A. (2011) Evaluation of Malaysian Ceiba pentandra (L.) Gaertn. for oily water filtration using factorial design. Desalination, 266 (1-3). pp. 51-55. ISSN 00119164

Rusli, R. and Shariff, A.M. (2011) Evaluating inherently safer design alternatives using hazard conflict approach. WIT Transactions on Ecology and the Environment, 148. pp. 539-550. ISSN 17433541

Rouhi, J. and Mahmud, S. and Hutagalung, S.D. and Kakooei, S. (2011) Fabrication of nanogap electrodes via nano-oxidation mask by scanning probe microscopy nanolithography. Journal of Micro/Nanolithography, MEMS, and MOEMS, 10 (4). ISSN 19325150

Rahman, M.H. and Pierson, B.J. (2011) Effects of microporosity on permeability and sonic velocity of Miocene carbonates and an approach to relate micrite microtextures with microporosity occurrences in Miocene carbonate reservoirs of offshore Sarawak, Malaysia. SEG Technical Program Expanded Abstracts, 30 (1). pp. 2059-2063. ISSN 10523812

Rama Rao, K.S. and Azhar, N.S.M. and Hamid, N.H. (2011) A comparative study on optimal design of LLC resonant converter by intelligent optimization techniques. International Review on Modelling and Simulations, 4 (2). pp. 547-554. ISSN 19749821

Rama Rao, K.S. and Chew, C.-K. (2011) Simulation and design of a Bi-directional DC-DC synchronous converter by intelligent optimization techniques. International Review on Modelling and Simulations, 4 (4). pp. 1439-1448. ISSN 19749821

Ratnayake, D.N. and Kazemian, H.B. and Yusuf, S.A. and Abdullah, A.B. (2011) An intelligent approach to detect probe request attacks in IEEE 802.11 networks. IFIP Advances in Information and Communication Technology, 363 AI (PART 1). pp. 372-381. ISSN 18684238

Rashid, U. and Rehman, H.A. and Hussain, I. and Ibrahim, M. and Haider, M.S. (2011) Muskmelon (Cucumis melo) seed oil: A potential non-food oil source for biodiesel production. Energy, 36 (9). pp. 5632-5639. ISSN 03605442

S

Salah, F. and Aziz, Z.A. and Ching, D.L.C. (2011) Accelerated flows of a magnetohydrodynamic (MHD) second grade fluid over an oscillating plate in a porous medium and rotating frame. International Journal of Physical Sciences, 6 (36). pp. 8027-8035. ISSN 19921950

Sabil, K.M. and Azmi, N. and Mukhtar, H. (2011) A review on carbon dioxide hydrate potential in technological applications. Journal of Applied Sciences, 11 (21). pp. 3534-3540. ISSN 18125654

Saleem H., M. and Hassan, M.F. and Sagayan Asirvadam, V. (2011) An intelligent query routing mechanism for distributed service discovery with IP-layer awareness. Communications in Computer and Information Science, 253 CC (PART 3). pp. 353-363. ISSN 18650929

Sufian, S. (2011) Irregular configurations of carbon nanofibers. Advanced Structured Materials, 5. pp. 125-141. ISSN 18698433

Suliman, Y. and Napiah, M. and Kamaruddin, I. (2011) Effect of fine aggregate physical properties on the engineering properties of conventional and polymer-modified bituminous mixtures. Transportation Research Record (2205). pp. 20-27. ISSN 03611981

Shamsuddin, N.Bt. and Wan Ahmad, W.F.Bt. and Baharudin, B.B. and Mohd Rajuddin, M.K.B. and Mohd, F.Bt. (2011) Image enhancement of underwater habitat using color correction based on histogram. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7066 L (PART 1). pp. 289-299. ISSN 03029743

Sebastian, P. and Voon, Y.V. and Comley, R. (2011) Performance evaluation metrics for video tracking. IETE Technical Review (Institution of Electronics and Telecommunication Engineers, India), 28 (6). pp. 493-502. ISSN 02564602

Sethuraman, G. (2011) Path partitionable graphs. Journal of Combinatorial Mathematics and Combinatorial Computing, 79. pp. 59-64. ISSN 08353026

Satheesh, G.K. and Nagarajan, T. (2011) Experimental investigations on the contour generation of a reconfigurable Stewart platform. International Journal of Intelligent Mechatronics and Robotics, 1 (4). pp. 87-99. ISSN 21561664

Shim, S.-O. and Malik, A.S. and Choi, T.-S. (2011) Noise reduction using mean shift algorithm for estimating 3D shape. Imaging Science Journal, 59 (5). pp. 267-273. ISSN 13682199

Salih, Y. and Malik, A.S. (2011) Comparison of stochastic filtering methods for 3D tracking. Pattern Recognition, 44 (10-11). pp. 2711-2737. ISSN 00313203

Sutjipto, A.G.E. and Triwiyanto, A. and Aminanda, Y. and Faris, W.F. and Adesta, E.Y.T. (2011) Visual inspection on premature failure of electric motor bearings. Applied Mechanics and Materials, 84-85. pp. 557-561. ISSN 16609336

Shoaib, M. and Faye, I. (2011) Collinear Equilibrium Solutions of Four-body Problem. Journal of Astrophysics and Astronomy, 32 (3). pp. 411-423. ISSN 02506335

Shafiq, N. (2011) Degree of hydration and compressive strength of conditioned samples made of normal and blended cement system. KSCE Journal of Civil Engineering, 15 (7). pp. 1253-1257. ISSN 12267988

Sahilu, S.W. and Wan Ahmad, W.F. and Haron, N.S. (2011) Development and usability evaluation of platform independent mobile learning tool (M-LT). World Academy of Science, Engineering and Technology, 80. pp. 1310-1321. ISSN 2010376X

Saleem, M.Q. and Jaafar, J. and Hassan, M.F. (2011) Security modeling of SOA system using security intent DSL. Communications in Computer and Information Science, 181 CC (PART 3). pp. 176-190. ISSN 18650929

Safdar, S. and Hassan, Mohd.F. (2011) Analyzing framework for alternate execution of workflows for different types of intrusion threats. Communications in Computer and Information Science, 180 CC (PART 2). pp. 361-375. ISSN 18650929

Sapari, N. and Azie, R.Z.R. and Jusoh, H. (2011) Quantity and quality of groundwater in fractured metasedimentary rocks of the West Coast of Peninsular Malaysia. Sains Malaysiana, 40 (6). pp. 537-542. ISSN 01266039

Sahoo, N.C. and Ganguly, S. and Das, D. (2011) Simple heuristics-based selection of guides for multi-objective PSO with an application to electrical distribution system planning. Engineering Applications of Artificial Intelligence, 24 (4). pp. 567-585. ISSN 09521976

Safdar, S. and Hassan, M.F. and Qureshi, M.A. and Akbar, R. (2011) Effective methods for secure authentication in vulnerable workflows using n�n passwords. Information Technology Journal, 10 (6). pp. 1161-1169. ISSN 18125638

Sulaiman, S.A. and Basil, S.C. and Dunggatt, N.S. and Hashim, M.H.M. (2011) Automated calculations for improvement of tank inventory at fuel terminals. Journal of Applied Sciences, 11 (10). pp. 1770-1776. ISSN 18125654

Sreejaya, K.V. and Al-Kayiem, H.H. and Gilani, S.I.U.-H. (2011) Analytical analysis of roof top solar chimney for power generation. Journal of Applied Sciences, 11 (10). pp. 1741-1748. ISSN 18125654

Sinnathambi, C.M. and Nor, N.M. and Ahmad, M.Z. (2011) Fouling characteristic and tendencies of Malaysian crude oils processing. Journal of Applied Sciences, 11 (10). pp. 1815-1820. ISSN 18125654

Sulaiman, S.A. and Hassan, A.H. (2011) Analysis of annual cooling energy requirements for glazed academic buildings. Journal of Applied Sciences, 11 (11). pp. 2024-2029. ISSN 18125654

Shimekit, B. and Mukhtar, H. and Murugesan, T. (2011) Prediction of the relative permeability of gases in mixed matrix membranes. Journal of Membrane Science, 373 (1-2). pp. 152-159. ISSN 03767388

Sinnathambi, C.M. (2011) Effect of calcination on Mo-modified zeolite catalyst. Journal of Applied Sciences, 11 (7). pp. 1336-1340. ISSN 18125654

Shaharun, M.S. and Mukhtar, H. and Dutta, B.K. (2011) Selectivity of rhodium-catalyzed hydroformylation of 1-octene in a thermomorphic solvent system. Journal of Applied Sciences, 11 (7). pp. 1157-1163. ISSN 18125654

Shafie, A. and Abdelaziz, M.A.B. (2011) Photovoltaic based irrigation system software. Journal of Applied Sciences, 11 (7). pp. 1371-1375. ISSN 18125654

Sunderan, P. and Ismail, A.M. and Singh, B. and Mohamed, N.M. (2011) Optimum tilt angle and orientation of stand-alone photovoltaic electricity generation systems for rural electrification. Journal of Applied Sciences, 11 (7). pp. 1219-1224. ISSN 18125654

Shahzad, B. and Al-Ohali, Y. and Abdullah, A. (2011) Trivial model for mitigation of risks in software development life cycle. International Journal of Physical Sciences, 6 (8). pp. 2072-2082. ISSN 19921950

Savita, K.S. and Hazwani, H. and Kalid, K.S. (2011) The development of a narrative management system: Storytelling in knowledge management. World Academy of Science, Engineering and Technology, 51. pp. 587-591. ISSN 2010376X

Savita, K.S. and Hazwani, H. and Kalid, K.S. (2011) The development of a narrative management system: Storytelling in knowledge management. World Academy of Science, Engineering and Technology, 75. pp. 588-592. ISSN 2010376X

Shuib, A. and Hoskins, P. and Easson, W. (2011) Experimental investigation of particle distribution in a flow through a stenosed artery. Journal of Mechanical Science and Technology, 25 (2). pp. 357-364. ISSN 1738494X

Sen, T.K. and Azman, A.F.B. and Maitra, S. and Dutta, B.K. (2011) Removal of mercury(II) from aqueous solutions using the leaves of the Rambai tree (Baccaurea motleyana). Water Environment Research, 83 (9). pp. 834-842. ISSN 10614303

Sankaran, K. and Kannabiran, G. and Dominic, P.D.D. (2011) Determinants of software quality in COTS products: An exploratory study. International Journal of Business Information Systems, 8 (1). pp. 4-22. ISSN 17460972

T

Tahir, S. and Md. Said, A. (2011) Bluetooth inter-piconet congestion avoidance protocol through network restructuring. Communications in Computer and Information Science, 253 CC (PART 3). pp. 508-518. ISSN 18650929

Tunio, S.Q. and Tunio, A.H. and Ghirano, N.A. and Irawan, S. (2011) Is it possible to ignore problems rising during vertical drilling? A review. Research Journal of Applied Sciences, Engineering and Technology, 3 (11). pp. 1331-1336. ISSN 20407459

Tufa, L.D. and Ramasamy, M. (2011) Closed-loop identification of systems with uncertain time delays using ARX-OBF structure. Journal of Process Control, 21 (8). pp. 1148-1154. ISSN 09591524

Tahir, H.M. and Md Said, A. and Elhalabi, M.J.M. and Puteh, N. and Othman, A. and Muhd Zain, N. and Md Dahalin, Z. and Ismail, M.H. and Mohd Zaini, K. and Zabidin Hussin, M. (2011) Improving network performance by enabling explicit congestion notification (ECN) in SCTP control chunks. Communications in Computer and Information Science, 188 CC (PART 1). pp. 288-297. ISSN 18650929

Tahir Bakhsh, S. and Hasbullah, H. and Tahir, S. (2011) Dynamic Congestion Control through backup relay in Bluetooth scatternet. Journal of Network and Computer Applications, 34 (4). pp. 1252-1262. ISSN 10848045

Taimur, K. and Malay, C. (2011) Adsorption capacity of coconut coir activated carbon in the removal of disperse and direct dyes from aqueous solution. Research Journal of Chemistry and Environment, 15 (2). pp. 601-605. ISSN 09720626

Tamidi, A.M. and Shaari, K.Z.K. and Yusup, S. and Keong, L.K. (2011) Model development for hydrodynamic study of fluidized bed gasifier for biomass gasification. Journal of Applied Sciences, 11 (13). pp. 2334-2339. ISSN 18125654

Triwiyanto, A. and Haruman, E. and Sudin, M.B. and Mridha, S. and Hussain, P. (2011) Structural and properties development of expanded austenite layers on AISI316L after low temperature thermochemical treatments. Journal of Applied Sciences, 11 (9). pp. 1536-1543. ISSN 18125654

Tamiru, A.L. and Hashim, F.M. and Rangkuti, C. (2011) Generating gas turbine component maps relying on partially known overall system characteristics. Journal of Applied Sciences, 11 (11). pp. 1885-1894. ISSN 18125654

Tasfy, S.F.H. and Zabidi, N.A.M. and Subbarao, D. (2011) Comparison of synthesis techniques for supported iron nanocatalysts. Journal of Applied Sciences, 11 (7). pp. 1150-1156. ISSN 18125654

Tawfeig, H. and Asirvadam, V.S. and Saad, N. (2011) Predicting flow rate of V-shape custom tank using derivative free recursive algorithm. Journal of Applied Sciences, 11 (7). pp. 1279-1284. ISSN 18125654

Taib, M.M. and Ziyada, A.K. and Wilfred, C.D. and Murugesan, T. (2011) Thermophysical properties of 1-propyronitrile-3-hexylimidazolium bromide + methanol at temperatures (293.15 to 323.15) K. Journal of Molecular Liquids, 158 (2). pp. 101-104. ISSN 01677322

Tufa, L.D. and Ramasamy, M. and Shuhaimi, M. (2011) Improved method for development of parsimonious orthonormal basis filter models. Journal of Process Control, 21 (1). pp. 36-45. ISSN 09591524

U

Usama, M.N. and Sherine, A. and Shuhaimi, M. (2011) Technology review of natural gas liquefaction processes. Journal of Applied Sciences, 11 (21). pp. 3541-3546. ISSN 18125654

Ullah, S. and Ahmad, F. and Megat-Yusoff, P.S.M. (2011) Effect of boric acid with kaolin clay on thermal degradation of intumescent fire retardant coating. Journal of Applied Sciences, 11 (21). pp. 3645-3649. ISSN 18125654

Uemura, Y. and Omar, W.N. and Tsutsui, T. and Yusup, S.B. (2011) Torrefaction of oil palm wastes. Fuel, 90 (8). pp. 2585-2591. ISSN 00162361

Ullah, S. and Ahmad, F. and Megat-Yusoff, P.S.M. and Azm, N.H.B. (2011) A study of bonding mechanism of expandable graphite based intumescent coating on steel substrate. Journal of Applied Sciences, 11 (9). pp. 1630-1635. ISSN 18125654

V

Vasant, P. (2011) Hybrid mesh adaptive direct search and genetic algorithms techniques for industrial production systems. Archives of Control Sciences, 21 (3). pp. 299-312. ISSN 12302384

Vasant, P. and Ganesan, T. and Elamvazuthi, I. and Webb, J.F. (2011) Interactive fuzzy programming for the production planning: The case of textile firm. International Review on Modelling and Simulations, 4 (2). pp. 961-970. ISSN 19749821

W

Wahab, A.A. and Latif, M.R.A. and Karuppanan, S. and Aziz, A.H.A. (2011) Three-dimensional reconstruction of resin-infused carbon fiber reinforced polymer composite. Malaysian Journal of Microscopy, 7 (1). pp. 176-180. ISSN 18237010

Wan, R. and Md Nordin, S.B.T.E. and Halib, M.B. and Ghazali, Z.B. (2011) Plagiarism among undergraduate students in an engineering- based university: An exploratory analysis. European Journal of Social Sciences, 25 (4). pp. 537-549. ISSN 14502267

Woldemichael, D.E. and Hashim, F.M. and Debnath, S. (2011) A knowledge-based conceptual design support system. Advanced Materials Research, 308-31. pp. 1540-1545. ISSN 10226680

Wan Ahmad, W.F. and Asnawi, R. and Binti Zulkefli, S.R. (2011) A development of integrated learning system for visual impaired. Communications in Computer and Information Science, 179 CC (PART 1). pp. 111-121. ISSN 18650929

Wagan, A.A. and Munir Mughal, B. and Hasbullah, H. (2011) VANET security framework for safety applications using trusted hardware. Communications in Computer and Information Science, 189 CC (PART 2). pp. 426-439. ISSN 18650929

Wei, K.S. and Karuppanan, S. (2011) Stress intensity factor for cracks emanating from a shaft. Journal of Applied Sciences, 11 (10). pp. 1839-1844. ISSN 18125654

Waluyo, J. and Majid, M.A.A. (2011) Performance evaluation of stratified TES using sigmoid dose response function. Journal of Applied Sciences, 11 (9). pp. 1642-1647. ISSN 18125654

Wasiu, S.O. and Sulaiman, S.A. and Aziz, A.R.A. (2011) An experimental study of different effects of EGR rates on the performance and exhaust emissions of the stratified charge piston direct injection compressed natural gas engine. Journal of Applied Sciences, 11 (9). pp. 1479-1490. ISSN 18125654

Windarta, M.B.S. and Fuad, K. (2011) Influence of applied load on wear characterizations of rail material. Journal of Applied Sciences, 11 (9). pp. 1636-1641. ISSN 18125654

Woldeyohannes, A.D. and Majid, M.A.A. (2011) Effect of age of pipes on performance of natural gas transmission pipeline network system. Journal of Applied Sciences, 11 (9). pp. 1612-1617. ISSN 18125654

Wong, D.M.L. (2011) Integrated reasoning approach for car faulty diagnosis. World Academy of Science, Engineering and Technology, 75. pp. 247-252. ISSN 2010376X

Wan, S. and Vallyutham, K. and Liew, M.S. and Potty, N.S. (2011) The effects of partial replacement of cement in cement mortar and brick by microwave incinerated rice husk ash (MIRHA). WIT Transactions on Ecology and the Environment, 148. pp. 87-94. ISSN 17433541

Woldeyohannes, A.D. and Majid, M.A.A. (2011) Simulation model for natural gas transmission pipeline network system. Simulation Modelling Practice and Theory, 19 (1). pp. 196-212. ISSN 1569190X

Y

Yahya, N. and Puspitasari, P. and Koziol, K. and Guiseppe, P. (2011) Ammonia synthesis. Advanced Structured Materials, 5. pp. 395-413. ISSN 18698433

Yahya, N. and Koziol, K. (2011) Carbon nanotubes: The Minuscule Wizards. Advanced Structured Materials, 5. pp. 1-22. ISSN 18698433

Yahya, N. (2011) Preface. Advanced Structured Materials, 5. v-vi. ISSN 18698433

Yahaya, N.Z. and Begam, K.M. and Awan, M. (2011) Experimental analysis of a new zero-voltage switching synchronous rectifier buck converter. IET Power Electronics, 4 (7). pp. 793-798. ISSN 17554535

Yusoff, N. and Ramasamy, M. and Yusup, S. (2011) Taguchi's parametric design approach for the selection of optimization variables in a refrigerated gas plant. Chemical Engineering Research and Design, 89 (6). pp. 665-675. ISSN 02638762

Yunus, Y.M. and Al-Kayiem, H.H. and Albaharin, K.A.K. (2011) Design of a biomass burner/gas-to-gas heat exchanger for thermal backup of a solar dryer. Journal of Applied Sciences, 11 (11). pp. 1929-1936. ISSN 18125654

Yazid, E. and Parman, S. and Fuad, K. (2011) Vibration analysis of flexible gantry crane system subjected swinging motion of payload. Journal of Applied Sciences, 11 (10). pp. 1707-1715. ISSN 18125654

Yahya, N. and Akhtar, M.N. and Masun, A.F. and Kashif, M. (2011) Synthesis and characterization of ZnO-CNTs filled PVA composite as EM detector. Journal of Applied Sciences, 11 (7). pp. 1303-1308. ISSN 18125654

Yahya, N. and Al Habashi, R.M. and Koziol, K. and Borkowski, R.D. and Akhtar, M.N. and Kashif, M. and Hashim, M. (2011) Morphology and magnetic characterisation of aluminium substituted yttrium-iron garnet nanoparticles prepared using sol gel technique. Journal of Nanoscience and Nanotechnology, 11 (3). pp. 2652-2656. ISSN 15334880

Z

Zaid, H.M. (2011) Fullerene (C60) and its derivatives as resists for electron beam lithography. Advanced Structured Materials, 5. pp. 51-78. ISSN 18698433

Zawawi, N.A.W.A. and Abdullah, A. (2011) Evaluating stakeholders' preferences: Reconciling heritage and sustainability in kuala lumpur traditional areas. Planning Malaysia, 9. pp. 37-50. ISSN 16756215

Zaman, N. and Abdullah, A.B. and Ahmad, I. and Ahmed, M. (2011) Routing energy efficiency and quality of service (QoS) of Wireless Sensor Network (WSN). Information, 14 (10). pp. 3297-3303. ISSN 13434500

Zamin, N. and Oxley, A. (2011) Building a corpus-derived gazetteer for named entity recognition. Communications in Computer and Information Science, 180 CC (PART 2). pp. 73-80. ISSN 18650929

Ziyada, A.K. and Bustam, M.A. and Wilfred, C.D. and Murugesan, T. (2011) Densities, viscosities, and refractive indices of 1-hexyl-3-propanenitrile imidazolium ionic liquids incorporated with sulfonate-based anions. Journal of Chemical and Engineering Data, 56 (5). pp. 2343-2348. ISSN 00219568

Zaharuddin, W.A.W. and Ariwahjoedi, B. and Hussain, P. (2011) Effect of vermiculite addition on thermal characteristic of water-based acrylic fire retardant coating formulation. Journal of Applied Sciences, 11 (10). pp. 1763-1769. ISSN 18125654

Zambri, M.S.M. and Mohamed, N.M. and Kait, C.F. (2011) Preparation of electrochromic material using carbon nanotubes (CNTs). Journal of Applied Sciences, 11 (7). pp. 1321-1325. ISSN 18125654

Ziyada, A.K. and Wilfred, C.D. and Bustam, M.A. (2011) Synthesis and physiochemical properties of supramolecular phosphonium-based symmetrical dicationic ionic liquids. Journal of Applied Sciences, 11 (7). pp. 1356-1360. ISSN 18125654

Zaine, S.N.A. and Mastan, A.A.K. and Ahmedullah, S.S. and Mohamed, N.M. and Ahmad, I.A. and Ramli, A. (2011) Synthesis and characterization of pure anatase TiO2 aggregates. Journal of Applied Sciences, 11 (7). pp. 1326-1330. ISSN 18125654

Zaid, H.M. and Yahya, N.B. and Akhtar, M.N. and Kashif, M. and Daud, H. and Brahim, S. and Shafie, A. and Hanif, N.H.H.M. and Zorkepli, A.A.B. (2011) ID EM modeling for onshore hydrocarbon detection using MATLAB. Journal of Applied Sciences, 11 (7). pp. 1136-1142. ISSN 18125654

Ziyada, A.K. and Man, Z. and Murugesan, T. and Bustam, M.A. and Wilfred, C.D. (2011) Thennophysical properties of trihexyltetradecyl phosphonium octylsulfosuccinate ionic liquid. Journal of Applied Sciences, 11 (7). pp. 1396-1400. ISSN 18125654

Zaid, H.M. and Yahya, N. and Akhtar, M.N. and Ahmad Sallehim, A.B. (2011) Synthesis and characterizations of ZnO nanoparticles for application in electromagnetic detectors. Journal of Nano Research, 13. pp. 93-98. ISSN 16625250

Zaini, Z.H. and Ahmad, W.F.W. (2011) Effectiveness and usability evaluation of 'Li2D' courseware. World Academy of Science, Engineering and Technology, 50. pp. 747-750. ISSN 2010376X

Zaini, Z.H. and Ahmad, W.F.W. (2011) Effectiveness and Usability evaluation of 'Li2D' courseware. World Academy of Science, Engineering and Technology, 74. pp. 754-758. ISSN 2010376X

Zahed, M.A. and Aziz, H.A. and Isa, M.H. and Mohajeri, L. and Mohajeri, S. and Kutty, S.R.M. (2011) Kinetic modeling and half life study on bioremediation of crude oil dispersed by Corexit 9500. Journal of Hazardous Materials, 185 (2-3). pp. 1027-1031. ISSN 03043894

Zin, A.A.M. and Halim, H.A. and Abdul Karim, S.P. (2011) Sympathetic inrush phenomenon analysis and solution for a power transformer. International Review on Modelling and Simulations, 4 (2). pp. 601-607. ISSN 19749821

Ziyada, A.K. and Bustam, M.A. and Murugesan, T. and Wilfred, C.D. (2011) Effect of sulfonate-based anions on the physicochemical properties of 1-alkyl-3-propanenitrile imidazolium ionic liquids. New Journal of Chemistry, 35 (5). pp. 1111-1116. ISSN 11440546

Zahlay, F.D. and Rama Rao, K.S. and Ibrahim, T.B. (2011) A new intelligent autoreclosing scheme using artificial neural network and taguchi's methodology. IEEE Transactions on Industry Applications, 47 (1). pp. 306-313. ISSN 00939994