Ugheoke, B.I. and Mamat, O. and Ariwahjoedi, B. (2010) A brief survey of the literature on silica refractory research and development: The case for nanostructured silica obtained from rice husk ash (RHA). Defect and Diffusion Forum, 307. pp. 53-62. ISSN 10120386

Taib, M.M. and Murugesan, T. (2010) Densities and excess molar volumes of binary mixtures of bis(2-hydroxyethyl)ammonium acetate + water and monoethanolamine + Bis(2-hydroxyethyl)ammonium acetate at temperatures from (303.15 to 353.15) K. Journal of Chemical and Engineering Data, 55 (12). pp. 5910-5913. ISSN 00219568

Al Wadi, S. and Ismail, M.T. and Karim, S.A.A. (2010) A comparison between haar wavelet transform and Fast Fourier Transform in analyzing financial time series data. Research Journal of Applied Sciences, 5 (5). pp. 352-360. ISSN 1815932X

Abdullah, M.R.T.L. and Siraj, S. (2010) M-learning curriculum design for secondary school: A needs analysis. World Academy of Science, Engineering and Technology, 42. pp. 1624-1629. ISSN 2010376X

Shuib, A.S. and Hoskins, P.R. and Easson, W.J. (2010) Flow regime characterization in a diseased artery model. World Academy of Science, Engineering and Technology, 38. pp. 100-104. ISSN 2010376X

Fathaddin, M.T. and Buang, P.N. and Elraies, K.A. (2010) Performance of surfactant flooding in heterogeneous two-layered porous media. International Journal of Engineering Research in Africa, 1. pp. 11-16. ISSN 16633571

Rafiq, S. and Man, Z. and Ahmad, F. and Maitra, S. (2010) Silica-polymer nanocomposite membranes for gas separation - A review, part 1. InterCeram: International Ceramic Review, 59 (6). pp. 341-349. ISSN 00205214

Nour El-Demerdash, U.M. and Awad, S. (2010) Use of ceramic materials for the adsorptive storage of natural gas - A review, Part 1. InterCeram: International Ceramic Review, 59 (3). pp. 198-202. ISSN 00205214

Maitra, S. and Banerjee, M. and Mukherjee, S. (2010) Synthesis and characterization of Fe-doped barium strontium titanate. InterCeram: International Ceramic Review, 59 (5). pp. 270-273. ISSN 00205214

Nour, U.M. and Awad, S. (2010) Use of ceramic materials for the adsorptive storage of natural gas - A review, part 2. InterCeram: International Ceramic Review, 59 (5). pp. 281-286. ISSN 00205214

Khalifa, M. (2010) Correlation of the Devonian formations in the Blantyre Sub-basin, New South Wales with the Adavale Basin, Queensland. Journal and Proceedings of the Royal Society of New South Wales, 143 (3-4). pp. 19-33. ISSN 00359173

Malakahmad, A. and Nasir, M.Z.Z.C.M. and Kutty, S.R.M. and Isa, M.H. (2010) Solid waste characterization and recycling potential for University Technology PETRONAS academic buildings. American Journal of Environmental Sciences, 6 (5). pp. 422-427. ISSN 1553345X

Lai, C.-Y. and Zakaria, N. (2010) Pressure-based 3D curve drawing. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 6133 L. pp. 156-159. ISSN 03029743

Zakaria, N. (2010) A sketch-and-grow interface for botanical tree modeling. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 6133 L. pp. 25-32. ISSN 03029743

Ahmed, H.Y. and Faye, I. and Saad, N.B.M. and Aljunid, S.A. (2010) Ocdma system: New detection scheme and encoder-decoder structure based on fibre bragg gratings (FBGs) for VCC code. International Journal of Computers and Applications, 32 (4). pp. 461-468. ISSN 1206212X

Zaiyadi, M.F. and Baharudin, B. (2010) A proposed hybrid approach for feature selection in text document categorization. World Academy of Science, Engineering and Technology, 72. pp. 137-141. ISSN 2010376X

Abdullah, S.S. and Yusup, S. and Ahmad, M.M. and Ramli, A. and Ismail, L. (2010) Thermogravimetry study on pyrolysis of various lignocellulosic biomass for potential hydrogen production. World Academy of Science, Engineering and Technology, 72. pp. 129-133. ISSN 2010376X

Habib, N.Z. and Kamaruddin, I. and Napiah, M. and Mohd Tan, I. (2010) Rheological properties of polyethylene and polypropylene modified bitumen. World Academy of Science, Engineering and Technology, 72. pp. 293-297. ISSN 2010376X

Masrom, S. and Abidin, S.Z.Z. and Abdul Rahman, P.N.M. and Abd. Rahman, A.S. (2010) Software framework for flexible user defined metaheuristic hybridization. Communications in Computer and Information Science, 117 CC. pp. 218-227. ISSN 18650929

Khan, M.I. and Jeoti, V. and Malik, A.S. (2010) On perceptual encryption: Variants of DCT block scrambling scheme for JPEG compressed images. Communications in Computer and Information Science, 123 CC. pp. 212-223. ISSN 18650929

Ahmad, I. and Abdullah, A. and Alghamdi, A. (2010) Investigating supervised neural networks to intrusion detection. ICIC Express Letters, 4 (6 A). pp. 2133-2138. ISSN 1881803X

Ahmad, M.M. and Hauan, S. and Przybycien, T.M. (2010) Flowsheet simulation of aqueous two-phase extraction systems for protein purification. Journal of Chemical Technology and Biotechnology, 85 (12). pp. 1575-1587. ISSN 02682575

Khan, M.A. and Yusup, S. and Ahmad, M.M. (2010) Acid esterification of a high free fatty acid crude palm oil and crude rubber seed oil blend: Optimization and parametric analysis. Biomass and Bioenergy, 34 (12). pp. 1751-1756. ISSN 09619534

Zahed, M.A. and Aziz, H.A. and Isa, M.H. and Mohajeri, L. and Mohajeri, S. (2010) Optimal conditions for bioremediation of oily seawater. Bioresource Technology, 101 (24). pp. 9455-9460. ISSN 09608524

Baharom, M.B. and Hussain, K. and Day, A.J. (2010) Design concepts and analysis of a semi-active steering system for a passenger car. Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, 223 (4). pp. 283-292. ISSN 14644193

Lateef, O.A. (2010) Case for alternative approach to building maintenance management of public universities. Journal of Building Appraisal, 5 (3). pp. 201-212. ISSN 17428262

Hasan, M.K. and Sulaiman, J. and Karim, S.A.A. (2010) A new high order algorithm with low computational complexity for electric field simulation. Journal of Computer Science, 6 (7). pp. 769-774. ISSN 15493636

Kazemitabar, H. and Ahmed, S. and Nisar, K. and Said, A.B. and Hasbullah, H.B. (2010) A survey on voice over IP over wireless LANs. World Academy of Science, Engineering and Technology, 71. pp. 352-358. ISSN 2010376X

Nordin, S.M. and Wan Ahmad, W.F. and Masri, M. (2010) Learning English literature through multimedia. European Journal of Social Sciences, 17 (2). pp. 238-253. ISSN 14502267

Pierson, B.J. and Chalabi, A. and Asha'Ari, A.A. (2010) Modern analogues to heterogeneous Miocene carbonate reservoirs of the South China Sea. First Break, 28 (11). pp. 91-96. ISSN 02635046

Vasant, P. and Barsoum, N. and Webb, J.F. (2010) Erratum: Special issue: PCO' 2010-gold coast, Australia 2-4th December, 2010, 3rd global conference on power control optimization (Computers and Mathematics with Applications (2010) 60:4 (9251134)). Computers and Mathematics with Applications, 60 (10). p. 2898. ISSN 08981221

Aklilu, B.T. and Gilani, S.I. (2010) Mathematical modeling and simulation of a cogeneration plant. Applied Thermal Engineering, 30 (16). pp. 2545-2554. ISSN 13594311

Nugroho, G. and Ali, A.M.S. and Abdul Karim, Z.A. (2010) A class of exact solutions to the three-dimensional incompressible NavierStokes equations. Applied Mathematics Letters, 23 (11). pp. 1388-1396. ISSN 08939659

Hew, K.L. and Tamidi, A.M. and Yusup, S. and Lee, K.T. and Ahmad, M.M. (2010) Catalytic cracking of bio-oil to organic liquid product (OLP). Bioresource Technology, 101 (22). pp. 8855-8858. ISSN 09608524

Zahed, M.A. and Aziz, H.A. and Isa, M.H. and Mohajeri, L. (2010) Enhancement biodegradation of n-alkanes from crude oil contaminated seawater. International Journal of Environmental Research, 4 (4). pp. 655-664. ISSN 17356865

Ramanathan, C.T. and Narayanan, S.P. and Idrus, A.B. (2010) Component optimisation of multiple D&B bridge projects: A case study in Sabah, Malaysia. World Academy of Science, Engineering and Technology, 64. pp. 38-51. ISSN 2010376X

Minh, V.T. and Mohd Hashim, F. (2010) Adaptive teleoperation system with neural network-based multiple model control. Mathematical Problems in Engineering, 2010. ISSN 1024123X

Basri, S. and O'Connor, R.V. (2010) Understanding the perception of very small software companies towards the adoption of process standards. Communications in Computer and Information Science, 99 CCI. pp. 153-164. ISSN 18650929

O'Connor, R.V. and Basri, S. and Coleman, G. (2010) Exploring managerial commitment towards SPI in small and very small enterprises. Communications in Computer and Information Science, 99 CCI. pp. 268-279. ISSN 18650929

Sivapalan, S. and Subramaniam, G. and Abdullah, A. (2010) Comprehending real world adolescent issues through adolescent literature: Learner perspectives from a malaysian institution of higher learning. International Journal of Learning, 17 (3). pp. 1-10. ISSN 14479494

Elraies, K.A. and Tan, I.M. and Awang, M. and Saaid, I. (2010) The synthesis and performance of sodium methyl ester sulfonate for enhanced oil recovery. Petroleum Science and Technology, 28 (17). pp. 1799-1806. ISSN 10916466

Nordin, S.M. and Halib, M. and Ghazali, Z. and Ali, R.M.M. (2010) Error correction and students' perception on teachers' written feedback: An exploratory study on L2 learners in a Malaysian University. International Journal of Learning, 17 (2). pp. 55-64. ISSN 14479494

Ahmad, I. and Abdullah, A. and Alghamdi, A. (2010) Towards the selection of best neural network system for intrusion detection. International Journal of Physical Sciences, 5 (12). pp. 1830-1839. ISSN 19921950

Japper-Jaafar, A. and Escudier, M.P. and Poole, R.J. (2010) Laminar, transitional and turbulent annular flow of drag-reducing polymer solutions. Journal of Non-Newtonian Fluid Mechanics, 165 (19-20). pp. 1357-1372. ISSN 03770257

Rahman, F. and Umesh, D.B. and Subbarao, D. and Ramasamy, M. (2010) Enhancement of entrainment rates in liquid-gas ejectors. Chemical Engineering and Processing: Process Intensification, 49 (10). pp. 1128-1135. ISSN 02552701

Vasant, P. and Ganesan, T. and Elamvazuthi, I. (2010) Fuzzy linear programming using modified logistic membership function. Journal of Engineering and Applied Sciences, 5 (3). pp. 239-245. ISSN 1816949X

Shariff, A.M. and Zaini, D. (2010) Toxic release consequence analysis tool (TORCAT) for inherently safer design plant. Journal of Hazardous Materials, 182 (1-3). pp. 394-402. ISSN 03043894

Awang, M. and Diyanti, I. (2010) The production of surfactant by direct reaction of pyrolysis oil for enhanced oil recovery. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 32 (16). pp. 1540-1546. ISSN 15567036

Minh, V.T. and Bin Mohd Hashim, F. (2010) Robust model predictive control schemes for tracking setpoints. Journal of Control Science and Engineering, 2010. ISSN 16875249

Zahed, M.A. and Aziz, H.A. and Mohajeri, L. and Mohajeri, S. and Kutty, S.R.M. and Isa, M.H. (2010) Application of statistical experimental methodology to optimize bioremediation of n-alkanes in aquatic environment. Journal of Hazardous Materials, 184 (1-3). pp. 350-356. ISSN 03043894

Manyar, H.G. and Paun, C. and Pilus, R. and Rooney, D.W. and Thompson, J.M. and Hardacre, C. (2010) Highly selective and efficient hydrogenation of carboxylic acids to alcohols using titania supported Pt catalysts. Chemical Communications, 46 (34). pp. 6279-6281. ISSN 13597345

Ziyada, A.K. and Wilfred, C.D. and Bustam, M.A. and Man, Z. and Murugesan, T. (2010) Thermophysical properties of 1-propyronitrile-3-alkylimidazolium bromide ionic liquids at temperatures from (293.15 to 353.15) K. Journal of Chemical and Engineering Data, 55 (9). pp. 3886-3890. ISSN 00219568

Muhammad, N. and Man, Z. and Khalil, M.A.B. and Tan, I.M. and Maitra, S. (2010) Studies on the thermal degradation behavior of ionic liquid regenerated cellulose. Waste and Biomass Valorization, 1 (3). pp. 315-321. ISSN 18772641

Sen, T.K. and Mohammod, M. and Maitra, S. and Dutta, B.K. (2010) Removal of cadmium from aqueous solution using castor seed hull: A kinetic and equilibrium study. Clean - Soil, Air, Water, 38 (9). pp. 850-858. ISSN 18630650

Goudah, G. and Ahmad, F. and Mamat, O. (2010) Microstructural studies of sintered carbon nanotubes reinforced copper matrix composite. Journal of Engineering Science and Technology, 5 (3). pp. 272-283. ISSN 18234690

Aroussi, A. and Lad, N. and Muhamad Said, M.F. and Adebayo, D. and Al-Atabi, M. (2010) The interaction of a cold atomised spray with a circular cylinder. Journal of Engineering Science and Technology, 5 (3). pp. 361-372. ISSN 18234690

Kaushal, H. and Jain, V.K. and Kar, S. (2010) Acquisition time for ground-to-satellite optical communication system in weak atmospheric turbulence with spatial diversity. Fiber and Integrated Optics, 29 (5). pp. 358-380. ISSN 01468030

Harimurti, S. and Dutta, B.K. and Ariff, I.F.B.M. and Chakrabarti, S. and Vione, D. (2010) Degradation of monoethanolamine in aqueous Solution by Fenton's reagent with Biological post-treatment. Water, Air, and Soil Pollution, 211 (1-4). pp. 273-286. ISSN 00496979

Mustapha, F. and Mustapha, M. and Noorsal, K. and Mamat, O. and Hussain, P. and Ahmad, F. and Muhamad, N. and Haris, S.M. (2010) Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process. Journal of Materials Processing Technology, 210 (12). pp. 1598-1612. ISSN 09240136

Khor, C.S. and Elkamel, A. (2010) Superstructure optimization for oil refinery design. Petroleum Science and Technology, 28 (14). pp. 1457-1465. ISSN 10916466

Roy, J. and Bandyopadhyay, N. and Das, S. and Maitra, S. (2010) Effect of copper ions on mullite formation from aluminosilicate precursor. Ceramics - Silikaty, 54 (2). pp. 128-132. ISSN 08625468

Khan, T. and Kutty, S.R.M. and Chaudhuri, M. (2010) Adsorptive removal of reactive yellow 15 from aqueous solution by coconut coir activated carbon. Adsorption Science and Technology, 28 (7). pp. 657-667. ISSN 02636174

Zabiri, H. and Mazuki, N. (2010) A black-box approach in modeling valve stiction. World Academy of Science, Engineering and Technology, 68. pp. 264-271. ISSN 2010376X

Khor, C.S. and Yeoh, X.Q. (2010) Optimization of petroleum refinery configuration design with logic propositions. World Academy of Science, Engineering and Technology, 68. pp. 198-201. ISSN 2010376X

Mesfin, G. and Shuhaimi, M. (2010) A chance constrained approach for a gas processing plant with uncertain feed conditions. Computers and Chemical Engineering, 34 (8). pp. 1256-1267. ISSN 00981354

Vasant, P. and Barsoum, N. (2010) Hybrid pattern search and simulated annealing for fuzzy production planning problems. Computers and Mathematics with Applications, 60 (4). pp. 1058-1067. ISSN 08981221

Díaz-Madroñero, M. and Peidro, D. and Vasant, P. (2010) Vendor selection problem by using an interactive fuzzy multi-objective approach with modified S-curve membership functions. Computers and Mathematics with Applications, 60 (4). pp. 1038-1048. ISSN 08981221

Vasant, P. and Barsoum, N. and Webb, J.F. (2010) Editorial: Special issue for 3rd global conference on power control optimization in Gold Coast, Australia 2-4th december 2010. Computers and Mathematics with Applications, 60 (4). p. 925. ISSN 08981221

Kamil, R.N.M. and Yusup, S. (2010) Modeling of reaction kinetics for transesterification of palm-based methyl esters with trimethylolpropane. Bioresource Technology, 101 (15). pp. 5877-5884. ISSN 09608524

Ahmad, I. and Abdulah, A.B. and Alghamdi, A.S. (2010) Towards the designing of a robust intrusion detection system through an optimized advancement of neural networks. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 6059 L. pp. 597-602. ISSN 03029743

Hasan, M.K. and Sulaiman, J. and Ahmad, S. and Othman, M. and Karim, S.A.A. (2010) Approximation of iteration number for gauss-seidel using redlich-Kister polynomial. American Journal of Applied Sciences, 7 (7). pp. 956-962. ISSN 15469239

Roy, J. and Bandyopadhyay, N. and Das, S. and Maitra, S. (2010) Effect of synthetic Fe2O3 on the properties of mullite ceramics derived from Di-phasic Al2O3-SiO 2 gel. Journal of the Australian Ceramic Society, 46 (1). pp. 15-22. ISSN 0004881X

Aziz, A.R.A. and Firmansyah and Shahzad, R. (2010) Combustion analysis of a cng direct injection spark ignition engine. International Journal of Automotive and Mechanical Engineering, 2 (1). pp. 157-170. ISSN 22298649

Arif, M.F. and Megat-Yusoff, P.S.M. and Ahmad, F. (2010) Effects of chemical treatment on oil palm empty fruit bunch reinforced high density polyethylene composites. Journal of Reinforced Plastics and Composites, 29 (14). pp. 2105-2118. ISSN 07316844

Ahmad Fadzil, M.H. and Izhar, L.I. and Nugroho, H.A. (2010) Determination of foveal avascular zone in diabetic retinopathy digital fundus images. Computers in Biology and Medicine, 40 (7). pp. 657-664. ISSN 00104825

Kaushal, H. and Jain, V.K. and Kar, S. (2010) Ground-to-satellite optical communication link performance with spatial diversity in weak atmospheric turbulence. Fiber and Integrated Optics, 29 (4). pp. 315-340. ISSN 01468030

Mohajeri, L. and Aziz, H.A. and Isa, M.H. and Zahed, M.A. and Mohajeri, S. (2010) Ex-situ bioremediation of crude oil in soil, a comparative kinetic analysis. Bulletin of Environmental Contamination and Toxicology, 85 (1). pp. 54-58. ISSN 00074861

Abdelbagi, S. and Ellis, G.A. (2010) Study on the effects of variation in line width on the planar spiral inductors on GaAs. International Journal of RF and Microwave Computer-Aided Engineering, 20 (4). pp. 458-464. ISSN 10964290

Xia, L. and Bell, I.M. and Wilkinson, A.J. (2010) Automated model generation algorithm for high-level fault modeling. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 29 (7). pp. 1140-1145. ISSN 02780070

Elmolla, E.S. and Chaudhuri, M. and Eltoukhy, M.M. (2010) The use of artificial neural network (ANN) for modeling of COD removal from antibiotic aqueous solution by the Fenton process. Journal of Hazardous Materials, 179 (1-3). pp. 127-134. ISSN 03043894

Mohammad, M. and Maitra, S. and Ahmad, N. and Bustam, A. and Sen, T.K. and Dutta, B.K. (2010) Metal ion removal from aqueous solution using physic seed hull. Journal of Hazardous Materials, 179 (1-3). pp. 363-372. ISSN 03043894

Lau, K.K. and Abu Bakar, M.Z. and Ahmad, A.L. and Murugesan, T. (2010) Effect of feed spacer mesh length ratio on unsteady hydrodynamics in 2d spiral wound membrane (swm) channel. Industrial and Engineering Chemistry Research, 49 (12). pp. 5834-5845. ISSN 08885885

El-Harbawi, M. and Mustapha, S. and Choong, T.S.Y. and Rashid, Z.A. and Rashid, S.A. and Sherif, A.A. (2010) SCIA: GIS-based software for assessing the impacts from chemical industrial accidents. Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management, 14 (2). pp. 104-114. ISSN 1090025X

Regupathi, I. and JagadeeshBabu, P.E. and Chitra, M. and Murugesan, T. (2010) Drag reduction in co-current down flow packed column using xanthan gum. Korean Journal of Chemical Engineering, 27 (4). pp. 1205-1212. ISSN 02561115

Abdullah, M.R.T.L. and Siraj, S. (2010) M-learning curriculum design for secondary school: A needs analysis. World Academy of Science, Engineering and Technology, 66. pp. 1638-1643. ISSN 2010376X

Noor Hazrin Hany, M.H. and Hanita, D. and Noorhana, Y. and Mohd Amirul, I. (2010) Multiple zones surveillance system using RFID. WSEAS Transactions on Systems, 9 (6). pp. 607-617. ISSN 11092777

El-Harbawi, M. and Sabidi, A.A.B. and Kamarudin, E.B. and Hamid, A.B.A. and Harun, S.B. and Nazlan, A.B. and Yi, C.X. (2010) Design of a portable dual proposes water filter system. Journal of Engineering Science and Technology, 5 (2). pp. 165-175. ISSN 18234690

Rahardjo, H. and Ong, T.H. and Rezaur, R.B. and Leong, E.C. and Fredlund, D.G. (2010) Response parameters for characterization of infiltration. Environmental Earth Sciences, 60 (7). pp. 1369-1380. ISSN 18666280

Khodjaev, J. and Park, Y. and Saeed Malik, A. (2010) Survey of NLOS identification and error mitigation problems in UWB-based positioning algorithms for dense environments. Annales des Telecommunications/Annals of Telecommunications, 65 (5-6). pp. 301-311. ISSN 00034347

Vasant, P. (2010) Hybrid simulated annealing and genetic algorithms for industrial production management problems. International Journal of Computational Methods, 7 (2). pp. 279-297. ISSN 02198762

Shuit, S.H. and Lee, K.T. and Kamaruddin, A.H. and Yusup, S. (2010) Reactive extraction of Jatropha curcas L. Seed for production of Biodiesel: Process optimization study. Environmental Science and Technology, 44 (11). pp. 4361-4367. ISSN 0013936X

Eltoukhy, M.M. and Faye, I. and Samir, B.B. (2010) Breast cancer diagnosis in digital mammogram using multiscale curvelet transform. Computerized Medical Imaging and Graphics, 34 (4). pp. 269-276. ISSN 08956111

Elmolla, E.S. and Chaudhuri, M. (2010) Comparison of different advanced oxidation processes for treatment of antibiotic aqueous solution. Desalination, 256 (1-3). pp. 43-47. ISSN 00119164

Yusup, S. and Khan, M.A. (2010) Base catalyzed transesterification of acid treated vegetable oil blend for biodiesel production. Biomass and Bioenergy, 34 (10). pp. 1500-1504. ISSN 09619534

Mohajeri, S. and Aziz, H.A. and Isa, M.H. and Zahed, M.A. and Bashir, M.J.K. and Adlan, Mohd.N. (2010) Application of the central composite design for condition optimization for semi-aerobic landfill leachate treatment using electrochemical oxidation. Water Science and Technology, 61 (5). pp. 1257-1266. ISSN 02731223

Sufian, S. and Yusup, S. and Ahmadun, F.R. (2010) Optimization for development of carbon nanotubes using Taguchi method at constant temperature. Journal of Nano Research, 11. pp. 95-100. ISSN 16625250

Yahya, N. and Daud, H. and Tajuddin, N.A. and Daud, H.M. and Shafie, A. and Puspitasari, P. (2010) Application of ZnO nanoparticles EM wave detector prepared by solgel and self-combustion techniques. Journal of Nano Research, 11. pp. 25-34. ISSN 16625250

Yusup, S. and Khan, M. (2010) Basic properties of crude rubber seed oil and crude palm oil blend as a potential feedstock for biodiesel production with enhanced cold flow characteristics. Biomass and Bioenergy, 34 (10). pp. 1523-1526. ISSN 09619534

Hasbullah, H. and Soomro, I.A. and Ab Manan, J.-L. (2010) Denial of service (DOS) attack and its possible solutions in VANET. World Academy of Science, Engineering and Technology, 65. pp. 411-415. ISSN 2010376X

Parimi, A.M. and Elamvazuthi, I. and Saad, N. (2010) Interline power Flow Controller application for low frequency oscillations damping. WSEAS Transactions on Systems, 9 (5). pp. 511-527. ISSN 11092777

Masrom, S. and Abidin, S.Z.Z. and Hashimah, P.N. and Rahman, A.S.A. (2010) Providing flexibility in the vehicle route optimization for the AVL based transport monitoring system. WSEAS Transactions on Computers, 9 (5). pp. 526-535. ISSN 11092750

Olanrewaju, A.L.A. and Khamidi, M.F. and Idrus, A. (2010) Quantitative analysis of defects in Malaysian university buildings: Providers perspective. Journal of Retail and Leisure Property, 9 (2). pp. 137-149. ISSN 14791110

Mohajeri, S. and Aziz, H.A. and Isa, M.H. and Bashir, M.J.K. and Mohajeri, L. and Adlan, M.N. (2010) Influence of Fenton reagent oxidation on mineralization and decolorization of municipal landfill leachate. Journal of Environmental Science and Health - Part A Toxic/Hazardous Substances and Environmental Engineering, 45 (6). pp. 692-698. ISSN 10934529

Abdullah, M.A. and Rahmah, A.U. and Man, Z. (2010) Physicochemical and sorption characteristics of Malaysian Ceiba pentandra (L.) Gaertn. as a natural oil sorbent. Journal of Hazardous Materials, 177 (1-3). pp. 683-691. ISSN 03043894

Oxley, A. (2010) Discrete mathematics and its applications. Teaching Mathematics and its Applications, 29 (3). pp. 155-163. ISSN 02683679

Saepurahman and Abdullah, M.A. and Chong, F.K. (2010) Dual-effects of adsorption and photodegradation of methylene blue by tungsten-loaded titanium dioxide. Chemical Engineering Journal, 158 (3). pp. 418-425. ISSN 13858947

Saepurahman and Abdullah, M.A. and Chong, F.K. (2010) Preparation and characterization of tungsten-loaded titanium dioxide photocatalyst for enhanced dye degradation. Journal of Hazardous Materials, 176 (1-3). pp. 451-458. ISSN 03043894

Mohajeri, S. and Aziz, H.A. and Isa, M.H. and Zahed, M.A. and Adlan, Mohd.N. (2010) Statistical optimization of process parameters for landfill leachate treatment using electro-Fenton technique. Journal of Hazardous Materials, 176 (1-3). pp. 749-758. ISSN 03043894

Roy, P. and Khanna, R. and Subbarao, D. (2010) Granulation time in fluidized bed granulators. Powder Technology, 199 (1). pp. 95-99. ISSN 00325910

Maitra, S. and Ahmad, F. and Das, A.K. and Das, S. and Dutta, B.K. (2010) Effect of curing conditions and ionic additives on properties of fly ash-lime compacts. Bulletin of Materials Science, 33 (2). pp. 185-190. ISSN 02504707

Zahed, M.A. and Aziz, H.A. and Isa, M.H. and Mohajeri, L. (2010) Effect of initial oil concentration and dispersant on crude oil biodegradation in contaminated seawater. Bulletin of Environmental Contamination and Toxicology, 84 (4). pp. 438-442. ISSN 00074861

Meselhy Eltoukhy, M. and Faye, I. and Belhaouari Samir, B. (2010) A comparison of wavelet and curvelet for breast cancer diagnosis in digital mammogram. Computers in Biology and Medicine, 40 (4). pp. 384-391. ISSN 00104825

Yunus, N.M. and Abdul Mutalib, M.I. and Man, Z. and Bustam, M.A. and Murugesan, T. (2010) Thermophysical properties of 1-alkylpyridinum bis(trifluoromethylsulfonyl)imide ionic liquids. Journal of Chemical Thermodynamics, 42 (4). pp. 491-495. ISSN 00219614

Sabil, K.M. and Witkamp, G.-J. and Peters, C.J. (2010) Estimations of enthalpies of dissociation of simple and mixed carbon dioxide hydrates from phase equilibrium data. Fluid Phase Equilibria, 290 (1-2). pp. 109-114. ISSN 03783812

Holbrey, J.D. and Rogers, R.D. and Shukla, S.S. and Wilfred, C.D. (2010) Optimised microwave-assisted synthesis of methylcarbonate salts: A convenient methodology to prepare intermediates for ionic liquid libraries. Green Chemistry, 12 (3). pp. 407-41. ISSN 14639262

Fadzil Ahmad, M.H. and Prakasa, E. and Fitriyah, H. and Nugroho, H. and Affandi, A.M. and Hussein, S.H. (2010) Validation on 3D surface roughness algorithm for measuring roughness of psoriasis lesion. World Academy of Science, Engineering and Technology, 63. pp. 116-121. ISSN 2010376X

Emelia Akashah, P.A. and Sharifah Nadiah, S.A. (2010) Developing online bookstore to facilitate manual process - UTP case study. World Academy of Science, Engineering and Technology, 63. pp. 193-197. ISSN 2010376X

Idrus, A. and Utomo, C. (2010) Functionality of negotiation agent on value-based design decision. World Academy of Science, Engineering and Technology, 63. pp. 394-398. ISSN 2010376X

Ahmad Fadzil, M.H. and Fitriyah, H. and Prakasa, E. and Nugroho, H. and Hussein, S.H. and Affandi, A.M. (2010) Objective assessment of psoriasis lesion thickness for PASI scoring using 3D digital imaging. World Academy of Science, Engineering and Technology, 63. pp. 109-115. ISSN 2010376X

Perumalsamy, M. and Murugesan, T. (2010) Extended NRTL model for PEG + salt based aqueous two-phase system. Asia-Pacific Journal of Chemical Engineering, 5 (2). pp. 355-360. ISSN 19322135

Sabil, K.M. and Witkamp, G.-J. and Peters, C.J. (2010) Measurement and modeling of bubble and dew points of the carbon dioxide + tetrahydrofuran + water system. Journal of Chemical and Engineering Data, 55 (2). pp. 813-818. ISSN 00219568

Elmolla, E.S. and Chaudhuri, M. (2010) Photocatalytic degradation of amoxicillin, ampicillin and cloxacillin antibiotics in aqueous solution using UV/TiO2 and UV/H2O2/TiO2 photocatalysis. Desalination, 252 (1-3). pp. 46-52. ISSN 00119164

Sabil, K.M. and Román, V.R. and Witkamp, G.-J. and Peters, C.J. (2010) Experimental observations on the competing effect of tetrahydrofuran and an electrolyte and the strength of hydrate inhibition among metal halides in mixed CO2 hydrate equilibria. Journal of Chemical Thermodynamics, 42 (3). pp. 400-408. ISSN 00219614

Hussain, M. and Takita, K. (2010) Improved critical current density in Zn doped YBCO single crystals. Physica C: Superconductivity and its Applications, 470 (4). pp. 291-294. ISSN 09214534

Waluyo, J. and Majid, M.A.A. (2010) Temperature profile and thermocline thickness evaluation of a stratified thermal energy storage tank. International Journal of Mechanical and Mechanics Engineering, 10 (1). pp. 7-12. ISSN 2077124X

Shaharun, M.S. and Mukhtar, H. and Dutta, B.K. (2010) Corrigendum to "Solubility of carbon monoxide and hydrogen in propylene carbonate and thermomorphic multicomponent hydroformylation solvent" Chem. Eng. Sci. 63 (2008) 3024-3035 (DOI:10.1016/j.ces.2008.02.035). Chemical Engineering Science, 65 (12). pp. 3903-3905. ISSN 00092509

Jaafar, J. and McKenzie, E. (2010) Dempster-Shafer's approach for autonomous virtual agent navigation in virtual environments. World Academy of Science, Engineering and Technology, 62. pp. 389-393. ISSN 2010376X

bin Hashim, A.S. and Wan Ahmad, W.F.B. and Ahmad, R.B. (2010) Mobile Learning implementation: Students' perceptions in UTP. World Academy of Science, Engineering and Technology, 62. pp. 816-819. ISSN 2010376X

Wendeson, S. and Wan Ahmad, W.F.B. and Haron, N.S.B. (2010) University students awareness on M-learning. World Academy of Science, Engineering and Technology, 62. pp. 787-791. ISSN 2010376X

Khan, K. and Baharudin, B.B. and Khan, A. and FazaleMalik (2010) Automatic extraction of features and Opinion-oriented sentences from customer reviews. World Academy of Science, Engineering and Technology, 62. pp. 457-461. ISSN 2010376X

Yunus, M.K. and Ahmad, M.M. and Inayat, A. and Yusup, S. (2010) Simulation of enhanced biomass gasification for hydrogen production using iCON. World Academy of Science, Engineering and Technology, 62. pp. 661-667. ISSN 2010376X

Eisa, O. and Shuhaimi, M. (2010) Thermodynamic study of hot potassium carbonate solution using aspen plus. World Academy of Science, Engineering and Technology, 62. pp. 704-708. ISSN 2010376X

Shuib, A.S. and Hoskins, P.R. and Easson, W.J. (2010) Flow regime characterization in a diseased artery model. World Academy of Science, Engineering and Technology, 62. pp. 110-114. ISSN 2010376X

Al Wadi, S. and Ismail, M.T. and Karim, S.A.A. (2010) Statistical computational of volatility in financial time series data. World Academy of Science, Engineering and Technology, 62. pp. 778-782. ISSN 2010376X

Mesfin, G. and Shuhaimi, M. (2010) A probabilistic optimization approach for a gas processing plant under uncertain feed conditions and product requirements. World Academy of Science, Engineering and Technology, 62. pp. 585-590. ISSN 2010376X

Mazlan, E.M. and Savita, K.S. and Zalfakhar, A.H. (2010) A small-scale knowledge management system for a service-oriented department. World Academy of Science, Engineering and Technology, 62. pp. 260-264. ISSN 2010376X

Nallagownden, P. and Mukerjee, R.N. and Masri, S. (2010) System reliability by prediction of generator output and losses in a competitive energy market. World Academy of Science, Engineering and Technology, 62. pp. 727-731. ISSN 2010376X

Jaafar, J. and Mohamed, H. and Razali, H. (2010) Design and development of architectural model darul ridzuan museum. World Academy of Science, Engineering and Technology, 62. pp. 394-398. ISSN 2010376X

Ahmad, R. and Kasbon, R. and Mazlan, E.M. and Sarlan, A. (2010) A framework for personalized multi-device information communicating system. World Academy of Science, Engineering and Technology, 62. pp. 764-767. ISSN 2010376X

Singh, B.S.M. and Kait, C.F. and Sivapalan, S. (2010) Developing practical aptitude amongst technical learners: The case of a Malaysian private institution of higher learning. European Journal of Social Sciences, 13 (1). pp. 67-73. ISSN 14502267

Shuit, S.H. and Lee, K.T. and Kamaruddin, A.H. and Yusup, S. (2010) Reactive extraction and in situ esterification of Jatropha curcas L. seeds for the production of biodiesel. Fuel, 89 (2). pp. 527-530. ISSN 00162361

Mohajeri, L. and Aziz, H.A. and Isa, M.H. and Zahed, M.A. (2010) A statistical experiment design approach for optimizing biodegradation of weathered crude oil in coastal sediments. Bioresource Technology, 101 (3). pp. 893-900. ISSN 09608524

Elmolla, E.S. and Chaudhuri, M. (2010) Degradation of amoxicillin, ampicillin and cloxacillin antibiotics in aqueous solution by the UV/ZnO photocatalytic process. Journal of Hazardous Materials, 173 (1-3). pp. 445-449. ISSN 03043894

Harris, F. and Kurnia, K.A. and Mutalib, M.I.A. and Murugesan, T. (2010) Heat capacity of sodium aminoacetate solutions before and after CO 2absorption. Journal of Chemical and Engineering Data, 55 (1). pp. 547-550. ISSN 00219568

Maulud, A. and Romagnoli, J. (2010) A fault detection and diagnosis strategy for batch/semi-batch processes. Chemical Product and Process Modeling, 5 (1). ISSN 19342659

Sudesh, S. and Meenakshi, M. and Sheeja, R.Y. and Murugesan, T. (2010) Optimization studies on biosorption of copper (II) by crab shell using response surface methodology(RSM). Chemical Product and Process Modeling, 5 (1). ISSN 19342659

Pillai, M.G. and Regupathi, I. and Miranda, L.R. and Murugesan, T. (2010) Moisture diffusivity and energy consumption during microwave drying of plaster of Paris. Chemical Product and Process Modeling, 5 (1). ISSN 19342659

Minh, V.T. and Ibrahim, I.B. (2010) RARX Estimator and Gain Scheduling Controller for On-Line Fault Detection Controller. International Journal of Automation Technology, 4 (1). pp. 53-57. ISSN 18817629

Azmi, B.M. and Shariff, A.M. and Maitra, S. and Ishihara, T. (2010) Effect of different solvents on the synthesis of δ-vanadyl phosphate and its performance as cathode for li-ion battery. Transactions of the Indian Ceramic Society, 69 (4). pp. 235-239. ISSN 0371750X

Firmanto, H. and Hussain, P. and Mamat, O. (2010) Suppression of iron silicide formation in the reaction layer of sialon-7.5 Cr ferritic steel joint. Defect and Diffusion Forum, 312-31. pp. 889-893. ISSN 10120386

Ahmad Fadzil, M. and Ngah, N.F. and George, T.M. and Izhar, L.I. and Nugroho, H. and Adi Nugroho, H. (2010) Analysis of foveal avascular zone in colour fundus images for grading of diabetic retinopathy severity. Conference proceedings : ... Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Conference. pp. 5632-5635. ISSN 1557170X

Johl, S.K. and Renganathan, S. (2010) Strategies for gaining access in doing fieldwork: Reflection of two researchers. Electronic Journal of Business Research Methods, 8 (1). pp. 42-50. ISSN 14777029

Sulaiman, S.A. and Murad, S.H.M. and Ibrahim, I. and Abdul Karim, Z.A. (2010) Study of flow in air-intake system for a single-cylinder Go-Kart engine. International Journal of Automotive and Mechanical Engineering, 1 (1). pp. 91-104. ISSN 22298649

Jaafar, J. and McKenzie, E. (2010) Autonomous virtual agent navigation in virtual environments. World Academy of Science, Engineering and Technology, 37. pp. 594-601. ISSN 2010376X

Roy, J. and Bandyopadhyay, N. and Das, S. and Maitra, S. (2010) Effect of CoO on the formation of mullite ceramics from Diphasic Al2O3-SiO2 Gel. Journal of Engineering Science and Technology Review, 3 (1). pp. 136-141. ISSN 17919320

Sebastian, P. and Voon, Y.V. and Comley, R. (2010) Colour space effect on tracking in video surveillance. International Journal on Electrical Engineering and Informatics, 2 (4). pp. 298-312. ISSN 20856830

Shariff, A.M. and Beshir, D.M. and Bustam, M.A. and Maitra, S. (2010) Some studies on the synthesis and characterization of carbon aerogel. Transactions of the Indian Ceramic Society, 69 (2). pp. 83-88. ISSN 0371750X

Othman, S. and Wahab, A.A. and Raghavan, V.R. (2010) Validation by PIV of the numerical study of flow in the plenum chamber of a swirling fluidized bed. CFD Letters, 2 (2). pp. 85-96. ISSN 21801363

Dutta, B.K. and Harimurti, S. and Ariff, I.F.M. and Chakrabarti, S. and Vione, D. (2010) Degradation of diethanolamine by Fenton's reagent combined with biological post-treatment. Desalination and Water Treatment, 19 (1-3). pp. 286-293. ISSN 19443994

Vasant, P. and Elamvazuthi, I. and Webb, J.F. (2010) Fuzzy technique for optimization of objective function with uncertain resource variables and technological coefficients. International Journal of Modeling, Simulation, and Scientific Computing, 1 (3). pp. 349-367. ISSN 17939623

Nallagownden, P. and Mukerjee, R.N. and Masri, S. (2010) Regression and tracing methodology based prediction of oncoming demand and losses in deregulated operation of power systems. European Journal of Scientific Research, 43 (3). pp. 370-383. ISSN 1450216X

Riaz, S. and Rambli, D.R.A. and Salleh, R. and Mushtaq, A. (2010) Study to investigate learning motivation factors within formal and informal learning environments and their influence upon web-based learning. International Journal of Emerging Technologies in Learning, 5 (4). pp. 41-50. ISSN 18688799

Parimi, A.M. and Elamvazuthi, I. and Saad, N. (2010) Improvement of power system stability with Fuzzy logic based IPFC. International Review of Electrical Engineering, 5 (3). pp. 1103-1109. ISSN 18276660

Asmare, M.H. and Asirvadam, V.S. and Iznita, L. and Hani, A.F.M. (2010) Image enhancement by fusion in contourlet transform. International Journal on Electrical Engineering and Informatics, 2 (1). pp. 29-42. ISSN 20856830

Roy, J. and Bandyopadhyay, N. and Das, S. and Maitra, S. (2010) Role of V2O5 on the formation of chemical mullite from aluminosilicate precursor. Ceramics International, 36 (5). pp. 1603-1608. ISSN 02728842

Kuppan Chetty, R.M. and Singaperumal, M. and Nagarajan, T. (2010) Behaviour based planning and control of leader follower formations in wheeled mobile robots. International Journal of Advanced Mechatronic Systems, 2 (4). pp. 281-296. ISSN 17568412

Xia, L. and Ian, B. and Antony, W. (2010) Review of high level fault modeling approaches for mixed-signal systems1. Journal of Electronics, 27 (4). pp. 490-497. ISSN 02179822

Iffa, E.D. and Aziz, A.R.A. and Malik, A.S. (2010) Concentration measurement of injected gaseous fuel using quantitative schlieren and optical tomography. Journal of the European Optical Society, 5. ISSN 19902573

Utomo, C. and Idrus, A. (2010) Value-based group decision on support bridge selection. World Academy of Science, Engineering and Technology, 67. pp. 188-193. ISSN 2010376X

Soleimani, H. and Abbas, Z. and Khalid, K. and Yahya, N. and Soleimani, H. (2010) Determination s-parameters of PTFE at X-Band frequency using FEM modeling rectangular waveguide. European Journal of Scientific Research, 39 (1). pp. 105-110. ISSN 1450216X

Chaudburi, M. and Kutty, S.R.M. and Yusop, S.H. (2010) Copper and cadmium adsorption by activated carbon prepared from coconut coir. Nature Environment and Pollution Technology, 9 (1). pp. 25-28. ISSN 09726268

Elmolla, E.S. and Chaudhuri, M. (2010) Photo-fenton treatment of antibiotic wastewater. Nature Environment and Pollution Technology, 9 (2). pp. 365-370. ISSN 09726268

Inayat, A. and Ahmad, M.M. and Abdul Mutalib, M.I. and Yusup, S. (2010) Flowsheet development and modelling of hydrogen production from empty fruit bunch via steam gasification. Chemical Engineering Transactions, 21. pp. 427-432. ISSN 22839216

Shafiq, N. and Silvianita (2010) Prioritizing the pipeline maintenance approach using analytical hierarchical process. International Review of Mechanical Engineering, 4 (3). pp. 346-352. ISSN 19708734

Khoa, T.D. and Shuhaimi, M. and Hashim, H. and Panjeshahi, M.H. (2010) Optimal design of distillation column using three dimensional exergy analysis curves. Energy, 35 (12). pp. 5309-5319. ISSN 03605442

Bhattacharyya, E. and Patil, A. and Sargunan, R.A. (2010) Methodology in seeking stakeholder perceptions of effective technical oral presentations: An exploratory pilot study. Qualitative Report, 15 (6). pp. 1549-1568. ISSN 10520147

Isa, M.H. and Kee, T.K. and Zinatizadeh, A.A. and Mohajeri, S. and Aziz, H.A. and Hung, Y.-T. (2010) Electrochemical treatment of semi-aerobic landfill leachate using Response Surface Methodology (RSM). International Journal of Environment and Pollution, 43 (4). pp. 324-338. ISSN 09574352

Tufa, L.D. and Ramasamy, M. and Shuhaimi, M. (2010) Closed-loop system identification using OBF-ARMAX model. Journal of Applied Sciences, 10 (24). pp. 3175-3182. ISSN 18125654

Tamidi, A.M. and Shaan, K.Z.K. (2010) Effect of steam inlet velocity and solid initial bed height to the hydrodynamics of fluidized bed gasifier. Journal of Applied Sciences, 10 (24). pp. 3257-3263. ISSN 18125654

Alfaresi, M. and Yusup, S. (2010) Application of taguchi technique to investigate the effect of process parameters on product yield and carbon content in empty palm oil fruit bunch carbonization. Journal of Applied Sciences, 10 (24). pp. 3264-3270. ISSN 18125654

Ahmed, A.O.M. and Maulud, A.S. and Ramasamy, M. and Mahadzir, S. (2010) Steady state modeling and simulation of the riser in an industrial RFCC unit. Journal of Applied Sciences, 10 (24). pp. 3207-3214. ISSN 18125654

Yusoff, N. and Ramasamy, M. (2010) Selection of RGP optimization variables using taguchi method. Journal of Applied Sciences, 10 (24). pp. 3313-3318. ISSN 18125654

Tsutsm, T. and Ueda, Y. and Ijichi, K. and Mizuta, K. and Uemura, Y. (2010) Evaluation of catalytic cracking reactivity of zeolites using 1-dodecene as a model feedstock-classification of zeolites based on hydrogen transfer reactivity. Journal of Applied Sciences, 10 (24). pp. 3215-3221. ISSN 18125654

Goudah, G. and Ahmad, F. and Mamat, O. and Omar, M.A. (2010) Preparation and characterization of copper feedstock for metal injection molding. Journal of Applied Sciences, 10 (24). pp. 3295-3300. ISSN 18125654

El-Harbawi, M. and Razali, Z.A.B. and Fuzi, S.M.F.B.S.M. and Mustapha, S. (2010) Development of a layer of protection analysis tool to determine the safety integrity level in process industries. Journal of Applied Sciences, 10 (24). pp. 3319-3324. ISSN 18125654

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. (2010) Effect of process parameters on hydrogen production and efficiency in biomass gasification using modelling approach. Journal of Applied Sciences, 10 (24). pp. 3183-3190. ISSN 18125654

Abdullah, S.S. and Yusup, S. (2010) Method for screening of Malaysian biomass based on aggregated matrix for hydrogen production through gasification. Journal of Applied Sciences, 10 (24). pp. 3301-3306. ISSN 18125654

Nouh, S.A. and Lau, K.K. and Shariff, A.M. (2010) Modeling and simulation of fixed bed adsorption column using integrated CFD approach. Journal of Applied Sciences, 10 (24). pp. 3229-3235. ISSN 18125654

Deshannavar, U.B. and Rafeen, M.S. and Ramasamy, M. and Subbarao, D. (2010) Crude oil fouling: A review. Journal of Applied Sciences, 10 (24). pp. 3167-3174. ISSN 18125654

Binyam, S. and Mukhtar, H. and Lau, K.K. (2010) Flux and rejection of methyldiethanolamine from wastewater by composite reverse osmosis membrane. Journal of Applied Sciences, 10 (24). pp. 3331-3336. ISSN 18125654

Elmolla, E.S. and Chaudhuri, M. (2010) Effect of photo-fenton operating conditions on the performance of photo-fenton-SBR process for recalcitrant wastewater treatment. Journal of Applied Sciences, 10 (24). pp. 3236-3242. ISSN 18125654

Uemura, Y. and Omar, W. and Tsutsui, T. and Subbarao, D. and Yusup, S. (2010) Relationship between calorific value and elementary composition of torrefied lignocellulosic biomass. Journal of Applied Sciences, 10 (24). pp. 3250-3256. ISSN 18125654

Ramli, A. and Suhaina, M.I. (2010) Preparation, characterization and catalytic test of MoVSb and MoVNb mixed oxide catalysts for propane ammoxidation to acrylonitrile. Journal of Applied Sciences, 10 (21). pp. 2697-2700. ISSN 18125654

Roy, J. and Bandyopadhyay, N. and Das, S. and Maitra, S. (2010) Role of Cr2O3 on the mullittization of di-phasic Al2O3-SiO2 gel. Ceramica, 56 (339). pp. 273-278. ISSN 03666913

Lemma, D.T. and Ramasamy, M. and Shuhaimi, M. (2010) System Identification using Orthonormal Basis Filters. Journal of Applied Sciences, 10 (21). pp. 2516-2522. ISSN 18125654

Khor, C.S. (2010) Stochastic programming with tractable Meanb-risk objectives for refinery planning under uncertainty. Journal of Applied Sciences, 10 (21). pp. 2618-2622. ISSN 18125654

Osman, M. and Ramasamy, M. (2010) Neural network based soft sensor for inferential control of a binary distillation column. Journal of Applied Sciences, 10 (21). pp. 2558-2564. ISSN 18125654

Abdullah, A. and Salleh, R. and Sivapalan, S. (2010) Management skills of technical and technology interns: Interns and supervisors perspectives. International Journal of Learning, 17 (4). pp. 421-430. ISSN 14479494

Inayat, A. and Ahmad, M.M. and Yusup, S. and Mutalib, M.I.A. (2010) Biomass steam gasification with in-situ CO2 capture for enriched hydrogen gas production: A reaction kinetics modelling approach. Energies, 3 (8). pp. 1472-1484. ISSN 19961073

Dominic, P.D.D. and Goh, K.N. and Wong, D. and Chen, Y.Y. (2010) The importance of service quality for competitive advantage - With special reference to industrial product. International Journal of Business Information Systems, 6 (3). pp. 378-397. ISSN 17460972

Wibowo, T.C.S. and Saad, N. (2010) MIMO model of an interacting series process for Robust MPC via System Identification. ISA Transactions, 49 (3). pp. 335-347. ISSN 00190578

Sabil, K.M. and Duarte, A.R.C. and Zevenbergen, J. and Ahmad, M.M. and Yusup, S. and Omar, A.A. and Peters, C.J. (2010) Kinetic of formation for single carbon dioxide and mixed carbon dioxide and tetrahydrofuran hydrates in water and sodium chloride aqueous solution. International Journal of Greenhouse Gas Control, 4 (5). pp. 798-805. ISSN 17505836

Dominic, P.D.D. and Jati, H. and Kannabiran, G. (2010) Performance evaluation on quality of Asian e-government websites - An AHP approach. International Journal of Business Information Systems, 6 (2). pp. 219-239. ISSN 17460972

Al-Kayiem, H.H. and Zaki, N.M. and Asyraf, M.Z. and Elfeel, M.E. (2010) Simulation of the cuttings cleaning during the drilling operation. American Journal of Applied Sciences, 7 (6). pp. 800-806. ISSN 15469239

Al-Kayiem, H.H. and Sidik, M.F.B.M. and Munusammy, Y.R.A.L. (2010) Study on the thermal accumulation and distribution inside a parked car cabin. American Journal of Applied Sciences, 7 (6). pp. 784-789. ISSN 15469239

Chok, V.S. and Gorin, A. and Chua, H.B. (2010) Minimum and complete fluidization velocity for sand-palm shell mixtures, Part II: Characteristic velocity profiles, critical loading and binary correlations. American Journal of Applied Sciences, 7 (6). pp. 773-779. ISSN 15469239

Ahmad, M.M. and Nordin, M.F.R. and Tazli Azizan, M. (2010) Upgrading of bio-oil into high-value hydrocarbons via hydrodeoxygenation. American Journal of Applied Sciences, 7 (6). pp. 746-755. ISSN 15469239

Chok, V.S. and Gorin, A. and Chua, H.B. (2010) Minimum and complete fluidization velocity for sand-palm shell mixtures, part i: Fluidization behavior and characteristic velocities. American Journal of Applied Sciences, 7 (6). pp. 763-772. ISSN 15469239

Shimekit, B. and Mukhtar, H. and Maitra, S. (2010) Comparison of predictive models for relative permeability of C02 in matrimid-carbon molecular sieve mixed matrix membrane. Journal of Applied Sciences, 10 (12). pp. 1204-1211. ISSN 18125654

Nour, U.M. and Awad, S. and Yusup, S. and Sufian, S. (2010) Technical evaluation of current hydrogen storage technologies for vehicles. Journal of Applied Sciences, 10 (12). pp. 1200-1203. ISSN 18125654

Ibrahim, R. and Lwin, Y. (2010) Adsorbents derived from mg-al hydrotalcite-like compounds for high-temperature hydrogen storage. Journal of Applied Sciences, 10 (12). pp. 1128-1133. ISSN 18125654

Ahmad, F. and Lau, K.K. and Shariff, A.M. (2010) Removal of CO2from natural gas using membrane separation system: Modeling and process design. Journal of Applied Sciences, 10 (12). pp. 1134-1139. ISSN 18125654

Parthiban, P. and Punniyamoorthy, P. and Mathiyalagan, M. and Dominic, P.D.D. (2010) Optimisation of supply chain performance using MCDM tool - A case study. International Journal of Value Chain Management, 4 (3). pp. 240-255. ISSN 17415357

Ku Shaari, K.Z. and Turton, R. (2010) The study of droplet impact behavior on flat surface with different surface properties. Defect and Diffusion Forum, 297-30. pp. 19-24. ISSN 10120386

Aziz, H.A. and Foul, A.A. and Isa, M.H. and Hung, Y.-T. (2010) Physico-chemical treatment of anaerobic landfill leachate using activated carbon and zeolite: Batch and column studies. International Journal of Environment and Waste Management, 5 (3-4). pp. 269-285. ISSN 14789876

Dominic, P.D.D. and Whab, A.A. and Kannabiran, G. and Foong, O.M. (2010) A new hybrid model for the supplier selection decision. International Journal of Business Information Systems, 5 (3). pp. 230-247. ISSN 17460972

Awang, M. and Mucino, V.H. (2010) Energy generation during friction stir spot welding (FSSW) of Al 6061-T6 plates. Materials and Manufacturing Processes, 25 (1-3). pp. 167-174. ISSN 10426914

Narahari, M. (2010) Effects of thermal radiation and free convection currents on the unsteady Couette flow between two vertical parallel plates with constant heat flux at one boundary. WSEAS Transactions on Heat and Mass Transfer, 5 (1). pp. 21-30. ISSN 17905044

Yan, S.Z. and Chyan, L.S. (2010) Performance enhancement of BOTDR fiber optic sensor for oil and gas pipeline monitoring. Optical Fiber Technology, 16 (2). pp. 100-109. ISSN 10685200

Sulaiman, S. and Blandford, A. and Cairns, P. (2010) Haptic experience and the design of drawing interfaces. Interacting with Computers, 22 (3). pp. 193-205. ISSN 09535438

Rusli, R. and Mohd Shariff, A. (2010) Qualitative Assessment for Inherently Safer Design (QAISD) at preliminary design stage. Journal of Loss Prevention in the Process Industries, 23 (1). pp. 157-165. ISSN 09504230

Sivapalan, S. and bt Wan Ahmad, W.F. (2010) A web-based multimedia approach to literature in Malaysian secondary schools: Learners' preferences. European Journal of Social Sciences, 12 (3). pp. 328-335. ISSN 14502267

Sabil, K.M. and Witkamp, G.-J. and Peters, C.J. (2010) Phase equilibria in ternary (carbon dioxide + tetrahydrofuran + water) system in hydrate-forming region: Effects of carbon dioxide concentration and the occurrence of pseudo-retrograde hydrate phenomenon. Journal of Chemical Thermodynamics, 42 (1). pp. 8-16. ISSN 00219614

Tufa, L.D. and Ramasamy, M. and Patwardhan, S.C. and Shuhaimi, M. (2010) Development of Box-Jenkins type time series models by combining conventional and orthonormal basis filter approaches. Journal of Process Control, 20 (1). pp. 108-120. ISSN 09591524

Teo, D.C.L. and Mannan, M.A. and Kurian, V.J. (2010) Durability of lightweight OPS concrete under different curing conditions. Materials and Structures/Materiaux et Constructions, 43 (1-2). pp. 1-13. ISSN 13595997

Shaharun, M.S. and Dutta, B.K. and Mukhtar, H. and Maitra, S. (2010) Hydroformylation of 1-octene using rhodium-phosphite catalyst in a thermomorphic solvent system. Chemical Engineering Science, 65 (1). pp. 273-281. ISSN 00092509

Rashid, Z.A. and El-Harbawi, M. and Shariff, A.R. (2010) Assessment on the consequences of liquefied petroleum gas release accident in the road transportation via gis approaches. Journal of Applied Sciences, 10 (12). pp. 1157-1165. ISSN 18125654