Article

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2024) Feasibility Evaluation of Waste Palm Oil Clinker Powder as a Fillers Substitute for Eco-Friendly Hot Mix Asphalt Pavement. International Journal of Pavement Research and Technology, 17 (2). pp. 446-459.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2024) Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures. International Journal of Pavement Research and Technology, 17 (1). pp. 123-150. ISSN 19966814

Jagaba, A.H. and Bashir, F.M. and Lawal, I.M. and Usman, A.K. and Yaro, N.S.A. and Birniwa, A.H. and Hamdoun, H.Y. and Shannan, N.M. (2023) Agricultural Wastewater Treatment Using Oil Palm Waste Activated Hydrochar for Reuse in Plant Irrigation: Synthesis, Characterization, and Process Optimization. Agriculture (Switzerland), 13 (8).

Jagaba, A.H. and Lawal, I.M. and Ghfar, A.A. and Usman, A.K. and Yaro, N.S.A. and Noor, A. and Abioye, K.J. and Birniwa, A.H. (2023) Biochar-based geopolymer nanocomposite for COD and phenol removal from agro-industrial biorefinery wastewater: Kinetic modelling, microbial community, and optimization by response surface methodology. Chemosphere, 339.

Yaro, N.S.A. and Sutanto, M.H. and Baloo, L. and Habib, N.Z. and Usman, A. and Yousafzai, A.K. and Ahmad, A. and Birniwa, A.H. and Jagaba, A.H. and Noor, A. (2023) A Comprehensive Overview of the Utilization of Recycled Waste Materials and Technologies in Asphalt Pavements: Towards Environmental and Sustainable Low-Carbon Roads. Processes, 11 (7). ISSN 22279717

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Usman, A. and Kaura, J.M. and Murana, A.A. and Birniwa, A.H. and Jagaba, A.H. (2023) A Comprehensive Review of Biochar Utilization for Low-Carbon Flexible Asphalt Pavements. Sustainability (Switzerland), 15 (8). ISSN 20711050

Usman, A. and Sutanto, M.H. and Yaro, N.S.A. and Albuaymi, M. and Alluqmani, A.E. and Alanazi, H. (2023) Effects of γ radiation on rutting and fatigue performance of WPET asphalt mixtures. Case Studies in Construction Materials, 19.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Jagaba, A.H. and Al-Sabaeei, A.M. (2023) Modeling and optimization of asphalt content, waste palm oil clinker powder and waste rice straw ash for sustainable asphalt paving employing response surface methodology: A pilot study. Cleaner Materials, 8.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Usman, A. and Tanjung, L.E. and Aliyu, I. and Jagaba, A.H. (2023) Optimizing biochar-based geopolymer composites for enhanced water resistance in asphalt mixes: an experimental, microstructural, and multi-objective analysis. Journal of Engineering and Applied Science, 70 (1).

Jagaba, A.H. and Birniwa, A.H. and Usman, A.K. and Mu'azu, N.D. and Yaro, N.S.A. and Soja, U.B. and Abioye, K.J. and Almahbashi, N.M.Y. and Al-dhawi, B.N.S. and Noor, A. and Lawal, I.M. (2023) Trend and current practices of coagulation-based hybrid systems for pulp and paper mill effluent treatment: mechanisms, optimization techniques and performance evaluation. Journal of Cleaner Production, 429. ISSN 09596526

Jagaba, A.H. and Kutty, S.R.M. and Baloo, L. and Birniwa, A.H. and Lawal, I.M. and Aliyu, M.K. and Yaro, N.S.A. and Usman, A.K. (2022) Combined treatment of domestic and pulp and paper industry wastewater in a rice straw embedded activated sludge bioreactor to achieve sustainable development goals. Case Studies in Chemical and Environmental Engineering, 6. ISSN 26660164

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Muhammad, A. (2022) Comparison of Response Surface Methodology and Artificial Neural Network approach in predicting the performance and properties of palm oil clinker fine modified asphalt mixtures. Construction and Building Materials, 324. ISSN 09500618

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Mizwar, I.K. and Umar, A.M. (2022) Engineering Properties of Palm Oil Clinker Fine-Modified Asphaltic Concrete Mixtures. Journal of Engineering and Technological Sciences, 54 (2). ISSN 23375779

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Feasibility Evaluation of Waste Palm Oil Clinker Powder as a Fillers Substitute for Eco-Friendly Hot Mix Asphalt Pavement. International Journal of Pavement Research and Technology. ISSN 19966814

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures. International Journal of Pavement Research and Technology. ISSN 19966814

Jagaba, A.H. and Kutty, S.R.M. and Abubakar, S. and Birniwa, A.H. and Lawal, I.M. and Umaru, I. and Usman, A.K. and Yaro, N.S.A. and Al-Zaqri, N. and Al-Maswari, B.M. and Ibrahim, M.N.M. and Hussain, F. (2022) Synthesis, Characterization, and Performance Evaluation of Hybrid Waste Sludge Biochar for COD and Color Removal from Agro-Industrial Effluent. Separations, 9 (9). ISSN 22978739

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Yaro, N.S.A. and Khan, M.I. (2021) Comparison of performance properties and prediction of regular and gamma-irradiated granular waste polyethylene terephthalate modified asphalt mixtures. Polymers, 13 (16). ISSN 20734360

Yaro, N.S.A. and Napiah, M.B. and Sutanto, M.H. and Usman, A. and Saeed, S.M. (2021) Modeling and optimization of mixing parameters using response surface methodology and characterization of palm oil clinker fine modified bitumen. Construction and Building Materials, 298. ISSN 09500618

Yaro, N.S.A. and Bin Napiah, M. and Sutanto, M.H. and Usman, A. and Saeed, S.M. (2021) Performance evaluation of waste palm oil fiber reinforced stone matrix asphalt mixtures using traditional and sequential mixing processes. Case Studies in Construction Materials, 15. ISSN 22145095

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Hainin, M.R. and Usman, A. and Rafindadi, A.D. and Abdulrahman, S. and Saeed, S.M. (2021) Utilization of Palm Oil Mill Residue as Sustainable Pavement Materials: A Review. International Journal of Integrated Engineering, 13 (3). pp. 66-78. ISSN 2229838X

Jagaba, A.H. and Kutty, S.R.M. and Hayder, G. and Baloo, L. and Noor, A. and Yaro, N.S.A. and Saeed, A.A.H. and Lawal, I.M. and Birniwa, A.H. and Usman, A.K. (2021) A systematic literature review on waste-to-resource potential of palm oil clinker for sustainable engineering and environmental applications. Materials, 14 (16). ISSN 19961944

Conference or Workshop Item

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Yaro, N.S.A. (2022) Evaluation of optimum asphalt content and engineering properties of asphalt mixture containing irradiated waste plastic bottles granules as aggregates. In: UNSPECIFIED.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Jagaba, A.H. and Mani, A.U. and Ahmad, A. (2022) Geopolymer utilization in the pavement industry - An overview. In: UNSPECIFIED.

Usman, A. and Sutanto, M.H. and Napiah, M. and Al-Sabaeei, A.M. and Yaro, N.S.A. and Kumalasari, I. and Saeed, S.M. (2022) Waste Polyethylene Terephthalate granules modified by gamma irradiation and their effect as fine aggregates on moisture damage of asphalt mixtures. In: UNSPECIFIED.

Yaro, N.S.A. and Napiah, M.B. and Sutanto, M.H. and Usman, A. and Murana, A.A. and Rafiq, W. (2021) Effect of Palm Oil Clinker Powder-Based Geopolymer on Bitumen and Asphalt Mixture Properties. In: UNSPECIFIED.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Rafindadi, A.D. and Saeed, S.M. and Abdulrahman, S. (2021) Evaluation of the Impact of Short-Term Aging on Volumetric and Marshall Properties of Palm Oil Clinker Fine Modified Asphalt Concrete (POCF-MAC). In: UNSPECIFIED.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Saeed, S.M. and Kaura, J.M. (2021) Influence of modification mixing parameters on conventional properties of palm oil clinker fine (POCF)-modified bitumen. In: UNSPECIFIED.