Sajjad, M. and Hu, A. and Alshehri, A.M. and Waqar, A. and Khan, A.M. and Bageis, A.S. and Elaraki, Y.G. and Shohan, A.A.A. and Benjeddou, O. (2024) BIM-driven energy simulation and optimization for net-zero tall buildings: sustainable construction management. Frontiers in Built Environment, 10.

Waqar, A. and Mateen Khan, A. and Othman, I. (2024) Blockchain empowerment in construction supply chains: Enhancing efficiency and sustainability for an infrastructure development. Journal of Infrastructure Intelligence and Resilience, 3 (1).

Saad Alotaibi, B. and Waqar, A. and Radu, D. and M.Khan, A. and Dodo, Y. and Althoey, F. and Almujibah, H. (2024) Building information modeling (BIM) adoption for enhanced legal and contractual management in construction projects. Ain Shams Engineering Journal, 15 (7).

Waqar, A. and Shafiq, N. and Othman, I. and Alsulamy, S.H. and Alshehri, A.M. and Falqi, I.I. (2024) Deterrents to the IoT for smart buildings and infrastructure development: A partial least square modeling approach. Heliyon, 10 (10).

Waqar, A. and Othman, I. and Shafiq, N. and Mansoor, M.S. (2024) Evaluating the critical safety factors causing accidents in downstream oil and gas construction projects in Malaysia. Ain Shams Engineering Journal, 15 (1).

Waqar, A. (2024) Evaluation of factors causing lateral migration of light non-aqueous phase liquids (LNAPLs) in onshore oil spill accidents. Environmental Science and Pollution Research, 31 (7). pp. 10853-10873. ISSN 09441344

Waqar, A. and Shafiq, N. and Othman, I. and Alqahtani, F.K. and Alshehri, A.M. and Sherif, M.A. and Almujibah, H.R. (2024) Examining the impact of BIM implementation on external environment of AEC industry: A PEST analysis perspective. Developments in the Built Environment, 17.

Waqar, A. and Hannan Qureshi, A. and Othman, I. and Saad, N. and Azab, M. (2024) Exploration of challenges to deployment of blockchain in small construction projects. Ain Shams Engineering Journal, 15 (2). ISSN 20904479

Waqar, A. and Othman, I. and Almujibah, H. and Hayat, S. (2024) Implementing building information modeling (BIM) for the success of geotechnical offshore construction projects: malaysian construction industry. Quality and Quantity, 58 (2). pp. 1945-1970. ISSN 00335177

Abuhussain, M.A. and Waqar, A. and Khan, A.M. and Othman, I. and Alotaibi, B.S. and Althoey, F. and Abuhussain, M. (2024) Integrating Building Information Modeling (BIM) for optimal lifecycle management of complex structures. Structures, 60.

Waqar, A. (2024) Intelligent decision support systems in construction engineering: An artificial intelligence and machine learning approaches. Expert Systems with Applications, 249. ISSN 09574174

Waqar, A. and Khan, M.B. and Afzal, M.T. and Radu, D. and G�l�ţanu, T. and Cazacu, C.E. and Dodo, Y. and Althoey, F. and Almujibah, H.R. (2024) Investigating the synergistic effects of carbon fiber and silica fume on concrete strength and eco-efficiency. Case Studies in Construction Materials, 20.

Waqar, A. and Houda, M. and Khan, A.M. and Khan, M.B. and Khan Raja, B.N. and Elmazi, G. (2024) Limitations to the BIM-based safety management practices in residential construction project. Environmental Challenges, 14. ISSN 26670100

Ghani, M.U. and Sun, B. and Houda, M. and Zeng, S. and khan, M.B. and ElDin, H.M.S. and Waqar, A. and Benjeddou, O. (2024) Mechanical and environmental evaluation of PET plastic-graphene nano platelets concrete mixes for sustainable construction. Results in Engineering, 21.

Waqar, A. and Shafiq, N. and Bheel, N. and Benjeddou, O. and Hamah Sor, N. and Hu, J.W. and Najm, H.M. and Almujibah, H.R. (2024) Modeling of success factors of using PU coats in concrete construction projects. Heliyon, 10 (7).

Waqar, A. and Bheel, N. and Tayeh, B.A. (2024) Modeling the effect of implementation of artificial intelligence powered image analysis and pattern recognition algorithms in concrete industry. Developments in the Built Environment, 17. ISSN 26661659

Waqar, A. and Othman, I. and Almujibah, H.R. and Sajjad, M. and Deifalla, A. and Shafiq, N. and Azab, M. and Qureshi, A.H. (2024) Overcoming implementation barriers in 3D printing for gaining positive influence considering PEST environment. Ain Shams Engineering Journal, 15 (3).

Waqar, A. and Houda, M. and Khan, A.M. and Qureshi, A.H. and Elmazi, G. (2024) Sustainable leadership practices in construction: Building a resilient society. Environmental Challenges, 14. ISSN 26670100

Bheel, N. and Waqar, A. and Radu, D. and Benjeddou, O. and Alwetaishi, M. and Almujibah, H.R. (2024) A comprehensive study on the impact of nano-silica and ground granulated blast furnace slag on high strength concrete characteristics: RSM modeling and optimization. Structures, 62.

Ali, A. and Houda, M. and Waqar, A. and Khan, M.B. and Deifalla, A. and Benjeddou, O. (2024) A review on application of hydrogen in gas turbines with intercooler adjustments. Results in Engineering, 22. ISSN 25901230

Karim, M.A. and Abdullah, M.Z. and Waqar, A. and Deifalla, A.F. and Ragab, A.E. and Khan, M. (2023) Analysis of the mechanical properties of the single layered braid reinforced thermoplastic pipe (BRTP) for oil & gas industries. Results in Engineering, 20.

Waqar, A. and Othman, I. and Shafiq Aiman, M. and Basit Khan, M. and Islam, M.M. and Almujibah, H. and Abdul Karim, M. (2023) Analyzing the Success of Adopting Metaverse in Construction Industry: Structural Equation Modelling. Journal of Engineering (United Kingdom), 2023. ISSN 23144904

Waqar, A. and Othman, I. and Shafiq, N. and Mansoor, M.S. (2023) Applications of AI in oil and gas projects towards sustainable development: a systematic literature review. Artificial Intelligence Review, 56 (11). pp. 12771-12798. ISSN 02692821

Waqar, A. and Othman, I. and Falqi, I.I. and Almujibah, H.R. and Alshehri, A.M. and Alsulamy, S.H. and Benjeddou, O. (2023) Assessment of Barriers to Robotics Process Automation (RPA) Implementation in Safety Management of Tall Buildings. Buildings, 13 (7).

Waqar, A. and Khan, M.B. and Shafiq, N. and Skrzypkowski, K. and Zagórski, K. and Zagórska, A. (2023) Assessment of Challenges to the Adoption of IOT for the Safety Management of Small Construction Projects in Malaysia: Structural Equation Modeling Approach. Applied Sciences (Switzerland), 13 (5). ISSN 20763417

Waqar, A. and Othman, I. and Saad, N. and Azab, M. and Khan, A.M. (2023) BIM in green building: Enhancing sustainability in the small construction project. Cleaner Environmental Systems, 11. ISSN 26667894

Waqar, A. and Qureshi, A.H. and Alaloul, W.S. (2023) Barriers to Building Information Modeling (BIM) Deployment in Small Construction Projects: Malaysian Construction Industry. Sustainability (Switzerland), 15 (3).

Waqar, A. and Othman, I. and Hayat, S. and Radu, D. and Khan, M.B. and Galatanu, T.F. and Almujibah, H.R. and Hadzima-Nyarko, M. and Benjeddou, O. (2023) Building Information Modeling�Empowering Construction Projects with End-to-End Life Cycle Management. Buildings, 13 (8).

Waqar, A. and Othman, I. and González-Lezcano, R.A. (2023) Challenges to the Implementation of BIM for the Risk Management of Oil and Gas Construction Projects: Structural Equation Modeling Approach. Sustainability (Switzerland), 15 (10). ISSN 20711050

Waqar, A. and Othman, I. and Saad, N. and Qureshi, A.H. and Azab, M. and Khan, A.M. (2023) Complexities for adopting 3D laser scanners in the AEC industry: Structural equation modeling. Applications in Engineering Science, 16. ISSN 26664968

Waqar, A. and Husin Gultom, M. and Hannan Qureshi, A. and Evianti Tanjung, L. and R. Almujibah, H. (2023) Complexities to the deployment of cloud computing for sustainability of small construction projects: Evidence from Pakistan. Ain Shams Engineering Journal, 14 (12).

Waqar, A. and Bheel, N. and Almujibah, H.R. and Benjeddou, O. and Alwetaishi, M. and Ahmad, M. and Sabri, M.M.S. (2023) Effect of Coir Fibre Ash (CFA) on the strengths, modulus of elasticity and embodied carbon of concrete using response surface methodology (RSM) and optimization. Results in Engineering, 17.

Waqar, A. and Bheel, N. and Shafiq, N. and Othman, I. and Khan, M.B. and Mansoor, M.S. and Benjeddou, O. and Yaseen, G. (2023) Effect of volcanic pumice powder ash on the properties of cement concrete using response surface methodology. Journal of Building Pathology and Rehabilitation, 8 (1).

Khan, M.B. and Shafiq, N. and Waqar, A. and Radu, D. and Cisma�, C. and Imran, M. and Almujibah, H. and Benjeddou, O. (2023) Effects of Jute Fiber on Fresh and Hardened Characteristics of Concrete with Environmental Assessment. Buildings, 13 (7).

Bageis, A.S. and Waqar, A. and Sor, N.H. and Almujibah, H. and Qureshi, A.H. and Jagadesh, P. and Deifalla, A.F. and Khan, M.B. and Dodo, Y. and Arbili, M.M. and Abuhussain, M.A. and Benjddou, O. (2023) Evaluation of Factors Affecting the Competitive Advantage of Organizations in Establishing Sustainable Project Management Post Covid-19. Journal of Engineering (United Kingdom), 2023. ISSN 23144904

Waqar, A. and Othman, I. and Skrzypkowski, K. and Ghumman, A.S.M. (2023) Evaluation of Success of Superhydrophobic Coatings in the Oil and Gas Construction Industry Using Structural Equation Modeling. Coatings, 13 (3). ISSN 20796412

Waqar, A. and Alshehri, A.H. and Alanazi, F. and Alotaibi, S. and Almujibah, H.R. (2023) Evaluation of challenges to the adoption of intelligent transportation system for urban smart mobility. Research in Transportation Business and Management, 51.

Waqar, A. and Andri and Qureshi, A.H. and Almujibah, H.R. and Tanjung, L.E. and Utami, C. (2023) Evaluation of success factors of utilizing AI in digital transformation of health and safety management systems in modern construction projects. Ain Shams Engineering Journal, 14 (11).

Sajjad, M. and Hu, A. and Waqar, A. and Falqi, I.I. and Alsulamy, S.H. and Bageis, A.S. and Alshehri, A.M. (2023) Evaluation of the Success of Industry 4.0 Digitalization Practices for Sustainable Construction Management: Chinese Construction Industry. Buildings, 13 (7).

Waqar, A. and Othman, I. and Almujibah, H. and Khan, M.B. and Alotaibi, S. and Elhassan, A.A.M. (2023) Factors Influencing Adoption of Digital Twin Advanced Technologies for Smart City Development: Evidence from Malaysia. Buildings, 13 (3).

Waqar, A. and Othman, I. and Pomares, J.C. (2023) Impact of 3D Printing on the Overall Project Success of Residential Construction Projects Using Structural Equation Modelling. International Journal of Environmental Research and Public Health, 20 (5). ISSN 16617827

Waqar, A. and Alharbi, L.A. and Abdullah Alotaibi, F. and Othman, I. and Almujibah, H. (2023) Impediment to implementation of Internet of Things (IOT) for oil and gas construction project Safety: Structural equation modeling approach. Structures, 57. ISSN 23520124

Waqar, A. and Othman, I. and Shafiq, N. and Deifalla, A. and Ragab, A.E. and Khan, M. (2023) Impediments in BIM implementation for the risk management of tall buildings. Results in Engineering, 20.

Waqar, A. and Othman, I. and Shafiq, N. and Mateen Khan, A. (2023) Integration of passive RFID for small-scale construction project management. Data and Information Management, 7 (4). ISSN 25439251

Waqar, A. and Othman, I. and Hamah Sor, N. and Alshehri, A.M. and Almujibah, H.R. and Alotaibi, B.S. and Abuhussain, M.A. and Bageis, A.S. and Althoey, F. and Hayat, S. and Benjeddou, O. and Alsulamy, S.H. and Aljarbou, M. (2023) Modeling relation among implementing AI-based drones and sustainable construction project success. Frontiers in Built Environment, 9.

Waqar, A. and Othman, I. and Shafiq, N. and Altan, H. and Ozarisoy, B. (2023) Modeling the Effect of Overcoming the Barriers to Passive Design Implementation on Project Sustainability Building Success: A Structural Equation Modeling Perspective. Sustainability (Switzerland), 15 (11). ISSN 20711050

Waqar, A. and Othman, I. and Radu, D. and Ali, Z. and Almujibah, H. and Hadzima-Nyarko, M. and Khan, M.B. (2023) Modeling the Relation between Building Information Modeling and the Success of Construction Projects: A Structural-Equation-Modeling Approach. Applied Sciences (Switzerland), 13 (15). ISSN 20763417

Tahir, H. and Khan, M.B. and Shafiq, N. and Radu, D. and Nyarko, M.H. and Waqar, A. and Almujibah, H.R. and Benjeddou, O. (2023) Optimisation of Mechanical Characteristics of Alkali-Resistant Glass Fibre Concrete towards Sustainable Construction. Sustainability (Switzerland), 15 (14).

Khan, M.B. and Waqar, A. and Bheel, N. and Shafiq, N. and Hamah Sor, N. and Radu, D. and Benjeddou, O. (2023) Optimization of Fresh and Mechanical Characteristics of Carbon Fiber-Reinforced Concrete Composites Using Response Surface Technique. Buildings, 13 (4). ISSN 20755309

Waqar, A. and Skrzypkowski, K. and Almujibah, H. and Zagórski, K. and Khan, M.B. and Zagórska, A. and Benjeddou, O. (2023) Success of Implementing Cloud Computing for Smart Development in Small Construction Projects. Applied Sciences (Switzerland), 13 (9).

Karim, M.A. and Abdullah, M.Z. and Deifalla, A.F. and Azab, M. and Waqar, A. (2023) An assessment of the processing parameters and application of fibre-reinforced polymers (FRPs) in the petroleum and natural gas industries: A review. Results in Engineering, 18. ISSN 25901230

Waqar, A. and Khan, M.B. and Othman, I. and Mansoor, M.S. and Shafiq, N. (2022) A Systematic Literature Review on Risk Analysis of Health and Safety in Oil Refinery and Onshore Pipeline Construction Projects. In: UNSPECIFIED.