Article

Musarat, M.A. and Alaloul, W.S. and Hameed, N. and Dhinaharan, R. and Qureshi, A.H. and Wahab, M.M.A. (2023) Efficient Construction Waste Management: A Solution through Industrial Revolution (IR) 4.0 Evaluated by AHP. Sustainability (Switzerland), 15 (1).

Wahab, M.M.A. and Shafiq, N. and Alaloul, W.S. and Rafiq, W. and Husna, N. and Farhan, S.A. and Ikram, T.A. and Musarat, M.A. (2023) Low-Concentration Acid Treatment of Sugarcane Bagasse with Silica Extraction for Partial Cement Replacement. Iranian Journal of Science and Technology - Transactions of Civil Engineering. ISSN 22286160

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2022) Effect of Graphene Oxide and Crumb Rubber on the Drying Shrinkage Behavior of Engineered Cementitious Composite (ECC): Experimental Study, RSM�Based Modelling and Optimization. Lecture Notes in Civil Engineering, 179. pp. 29-42. ISSN 23662557

Lye, H.L. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. (2021) Bond relationship of carbon fiber-reinforced polymer (Cfrp) strengthened steel plates exposed to service temperature. Materials, 14 (13). ISSN 19961944

Haruna, S. and Mohammed, B.S. and Wahab, M.M.A. and Kankia, M.U. and Amran, M. and Gora, A.M. (2021) Long-term strength development of fly ash-based one-part alkali-activated binders. Materials, 14 (15). ISSN 19961944

Shahrul, S. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. (2021) Mechanical properties of crumb rubber mortar containing nano-silica using response surface methodology. Materials, 14 (19). ISSN 19961944

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and multi-objective optimization of the fresh and mechanical properties of self-compacting high volume fly ash ECC (HVFA-ECC) using response surface methodology (RSM). Case Studies in Construction Materials, 14. ISSN 22145095

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and optimization of the mechanical properties of engineered cementitious composite containing crumb rubber pretreated with graphene oxide using response surface methodology. Construction and Building Materials, 310. ISSN 09500618

Wahab, M.M.A. and Anwar, N.A. and Mohammed, B. and Rahman, A.R.A. and Razak, Z. (2021) Response of corroded offshore structural plate at topsides due to blast loading. Lecture Notes in Civil Engineering, 132. pp. 318-325. ISSN 23662557

Sabapathy, L. and Mohammed, B.S. and Al-Fakih, A. and Wahab, M.M.A. and Liew, M.S. and Amran, Y.H.M. (2020) Acid and sulphate attacks on a rubberized engineered cementitious composite containing graphene oxide. Materials, 13 (14). ISSN 19961944

Lye, H.L. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. and Al-Fakih, A. (2020) Bond behaviour of CFRP-strengthened ECC using Response Surface Methodology (RSM). Case Studies in Construction Materials, 12. ISSN 22145095

Al-Fakih, A. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. and Alyousef, R. and Alabduljabbar, H. (2020) Characteristic compressive strength correlation of rubberized concrete interlocking masonry wall. Structures, 26. pp. 169-184. ISSN 23520124

Wahab, M.M.A. and Kurian, V.J. and Liew, M.S. and Kim, D.K. (2020) Condition Assessment Techniques for Aged Fixed-Type Offshore Platforms Considering Decommissioning: a Historical Review. Journal of Marine Science and Application, 19 (4). pp. 584-614. ISSN 16719433

Hong, D.L.H. and Mohammed, B.S. and Al-Fakih, A. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. (2020) Deformation properties of rubberized ecc incorporating nano graphene using response surface methodology. Materials, 13 (12). pp. 1-14. ISSN 19961944

Haruna, S. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. (2020) Effect of paste aggregate ratio and curing methods on the performance of one-part alkali-activated concrete. Construction and Building Materials, 261. ISSN 09500618

Al-Fakih, A. and Wahab, M.M.A. and Mohammed, B.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. and As'ad, S. (2020) Experimental study on axial compressive behavior of rubberized interlocking masonry walls. Journal of Building Engineering, 29. ISSN 23527102

Al-Fakih, A. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. (2020) Flexural behavior of rubberized concrete interlocking masonry walls under out-of-plane load. Construction and Building Materials, 263. ISSN 09500618

Rahim, N.I. and Mohammed, B.S. and Al-Fakih, A. and Wahab, M.M.A. and Liew, M.S. and Anwar, A. and Mugahed Amran, Y.H. (2020) Strengthening the structural behavior of web openings in RC deep beam using CFRP. Materials, 13 (12). pp. 1-21. ISSN 19961944

Mohammed, B.S. and Haruna, S. and Wahab, M.M.A. and Liew, M.S. and Haruna, A. (2019) Mechanical and microstructural properties of high calcium fly ash one-part geopolymer cement made with granular activator. Heliyon, 5 (9). ISSN 24058440

George, J.M. and Wahab, M.M.A. and John, K.V. (2017) Estimation of aging effects of piles in malaysian offshore locations. Journal of Engineering Science and Technology, 12 (4). pp. 987-1000. ISSN 18234690

George, J.M. and Kurian, V.J. and Wahab, M.M.A. (2016) Changes in the pushover analysis results of offshore jacket platforms due to the incorporation of the aging effect of piles. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2602-2606. ISSN 18196608

Kurian, V.J. and Goh, S.S. and Wahab, M.M.A. and Liew, M.S. (2015) Component reliability assessment of offshore jacket platforms. Research Journal of Applied Sciences, Engineering and Technology, 9 (1). pp. 1-10. ISSN 20407459

Kurian, V.J. and Voon, M.C. and Wahab, M.M.A. and Iskandar, N.A. and Liew, M.S. (2014) Multivariate regression analysis for screening process of reliability assessment. Applied Mechanics and Materials, 567. pp. 271-276. ISSN 16609336

Kurian, V.J. and Goh, S.S. and Wahab, M.M.A. and Liew, M.S. (2014) Reliability assessment model for aging jacket structures in Malaysian waters. Applied Mechanics and Materials, 567. pp. 283-288. ISSN 16609336

Kurian, V.J. and Voon, M.C. and Wahab, M.M.A. and Liew, M.S. (2014) System reliability assessment of existing jacket platforms in Malaysian waters. Research Journal of Applied Sciences, Engineering and Technology, 8 (23). pp. 2305-2314. ISSN 20407459

Kurian, V.J. and Wahab, M.M.A. and Kheang, T.S. and Liew, M.S. (2014) System reliability of existing jacket platform in Malaysian water (failure path and system reliability index). Applied Mechanics and Materials, 567. pp. 307-312. ISSN 16609336

Conference or Workshop Item

Azlan, F.S. and Wahab, M.M.A. and Ramli, M.Z. and Rahman, A.A. (2023) Fragility Analysis of Fixed Offshore Platform in Malaysia Under Earthquake Effect. In: UNSPECIFIED.

Al-Masoodi, A.H.H. and Alkhatib, F.H. and Shafiq, N. and Wahab, M.M.A. (2022) The Aerodynamic Performance of Tall Buildings by Utilizing Aerodynamic Modifications - A Review Study. In: UNSPECIFIED.

Jusoh, H. and Azahar, M.A. and Wahab, M.M.A. and Noh, K.A.M. and Abd Manan, T.S.B. and Jusoh, M.N.H. and Ghazalli, A.Z. and Kalid, N.Z.A. and Beddu, S. and Kamal, N.L.M. and Khan, T. (2022) Seismic Surface Wave as Supporting Method to Soil Investigation. In: UNSPECIFIED.

Husna, N. and Farhan, S.A. and Wahab, M.M.A. and Shafiq, N. and Sharif, M.T. and Razak, S.N.A. and Ismail, F.I. (2021) Building-Information-Modelling-Based Thermal-Energy Performance Evaluation of Silica-Aerogel-Incorporated Rigid Board Roof Insulation Material for Residential Buildings in the Tropical Climate of Malaysia. In: UNSPECIFIED.

Husna, N. and Farhan, S.A. and Wahab, M.M.A. and Wahab, M.M.A. and Shafiq, N. and Sharif, M.T. and Razak, S.N.A. and Ismail, I.F. (2021) Effect of Granular Silica Aerogel as Filler on Tensile and Flexural Strengths and Moduli of Stone-Wool-Fibre-Reinforced Composite as Rigid Board Roof Insulation Material. In: UNSPECIFIED.

Razak, S.N.A. and Shafiq, N. and Guillaumat, L. and Wahab, M.M.A. and Farhan, S.A. and Husna, N. and Ismail, F.I. (2021) Effect of Heating Duration at High Temperature on the Strength and Integrity of Fly Ash-Based Geopolymer Concrete. In: UNSPECIFIED.

Ruslan, H.N. and Muthusamy, K. and Ariffin, N.F. and Wahab, M.M.A. and Mohamad, N. (2021) Effect of crushed cockle shell as partial fine aggregate replacement on workability and strength of lightweight concrete. In: UNSPECIFIED.

Razak, S.N.A. and Shafiq, N. and Guillaumat, L. and Wahab, M.M.A. and Farhan, S.A. and Husna, N. and Ismail, F.I. (2021) Fire Performance of Fly Ash-Based Geopolymer Concrete: Effect of Burning Temperature. In: UNSPECIFIED.

Ismail, F.I. and Farhan, S.A. and Husna, N. and Shafiq, N. and Wahab, M.M.A. and Razak, S.N.A. (2021) Influence of Graphene Nanoplatelets on the Compressive and Split Tensile Strengths of Geopolymer Concrete. In: UNSPECIFIED.

Farhan, S.A. and Shafiq, N. and Husna, N. and Zain-Ahmed, A. and Wahab, M.M.A. and Razak, S.N.A. and Ismail, F.I. (2021) Thermal-Energy Performance of High-Albedo Roof Tiles and Bulk Rafter Insulation in Residential Roof in the Tropical Climate. In: UNSPECIFIED.

Haruna, S. and Mohammed, B.S. and Wahab, M.M.A. and Haruna, A. (2020) Compressive strength and workability of high calcium one-part alkali activated mortars using response surface methodology. In: UNSPECIFIED.

Nizamani, Z. and Woan Yih, L. and Wahab, M.M.A. and Mustaffa, Z. (2017) Determination of Correlation for Extreme Metocean Variables. In: UNSPECIFIED.

Wahab, M.M.A. and Kamal, A.R.M.M. and Kurian, V.J. (2016) Incremental wave analysis method: An alternative to load factor method in SACS pushover analysis. In: UNSPECIFIED.

Wahab, M.M.A. and Kurian, V.J. and Liew, M.S. and Nizamani, Z. and Kim, D.K. (2016) Structural reliability analysis using quadratic polynomial response surface and finite element in MATLAB. In: UNSPECIFIED.

Book

Chandrasekaran, S. and Jain, A.K. and Shafiq, N. and Wahab, M.M.A. (2021) Design Aids for Offshore Topside Platforms Under Special Loads. CRC Press, pp. 1-310. ISBN 9781000482140; 9781032136844