Article

Ahmed, S.W. and Altaf, K. and Tariq, A. and Alkahtani, M. and Buhl, J. and Hussain, G. (2024) Geometric Optimization of SLM-Printed AlSi10Mg Radial Heat Sinks: A Numerical and Experimental Approach for Natural Convection Conditions. Arabian Journal for Science and Engineering.

Ahmed, S.W. and Tariq, A. and Altaf, K. and Ali, S. and Hussain, G. and Baharom, M.B. (2024) Thermal Analysis of Helical Pin Fins at Different Pitch Steps Through Numerical Technique. Lecture Notes in Mechanical Engineering. pp. 71-83. ISSN 21954356

Tariq, A. and Ahmed, S.W. and Bin Baharom, M. and Altaf, K. and Hussain, G. and Jamil, A. and Mohammed, S.E. and Ali, H.M. (2024) An investigation of thermal and hydrodynamic behaviour of compound fins under turbulent flow conditions: A numerical and experimental approach. Alexandria Engineering Journal, 89. pp. 149-171.

Jamil, A. and Baharom, M.B. and Aziz, A.R.B.A. and Mohammed, S.E. and Ayandotun, W.B. and Tariq, A. (2023) A study on in-cylinder flow characteristics of crank-rocker engine using CFD and PIV. Materials Today: Proceedings.

Altaf, K. and Tariq, A. and Ahmad, S.W. and Hussain, G. and Ratlamwala, T.A.H. and Ali, H.M. (2022) Thermal and hydraulic analysis of slotted plate fins heat sinks using numerical and experimental techniques. Case Studies in Thermal Engineering, 35. ISSN 2214157X

Tariq, A. and Altaf, K. and Ahmad, S.W. and Hussain, G. and Ratlamwala, T.A.H. (2021) Comparative numerical and experimental analysis of thermal and hydraulic performance of improved plate fin heat sinks. Applied Thermal Engineering, 182. ISSN 13594311

Tariq, A. and Altaf, K. and Hussain, G. and Reezwan, M. (2021) Plate fin heat sink for the application in solar thermal power. Green Energy and Technology. pp. 115-131. ISSN 18653529

Memon, M.A. and Salleh, R. and Mirza, M.Z. and Cheah, J.-H. and Ting, H. and Ahmad, M.S. and Tariq, A. (2021) Satisfaction matters: the relationships between HRM practices, work engagement and turnover intention. International Journal of Manpower, 42 (1). pp. 21-50. ISSN 01437720

Tariq, A. and Altaf, K. and Rani, A.M.A. and Baharom, M. and Aziz, A.R.A. (2019) Study of heat transfer attributes of custom fins for Crank-Rocker engine block using ANSYS. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (2). pp. 235-243. ISSN 22897879

Book

Ahmed, S.W. and Altai, K. and Hussain, G. and Qayyum, J. and Tariq, A. (2023) Additive manufacturing based rapid tooling. CRC Press, pp. 115-136. ISBN 9781003220985; 9781032116693