Aswin, M. and Al-Fakih, A. and Syed, Z.I. and Liew, M.S. (2023) Influence of Different Dapped-End Reinforcement Configurations on Structural Behavior of RC Dapped-End Beam. Buildings, 13 (1).

Syed, Z.I. and Liew, M.S. and Rahman, S.A. and Palaniandy, D.K. (2018) Evaluation of Failure Capacity of Offshore Riser Protectors Under Vessel Impact. Journal of Failure Analysis and Prevention, 18 (2). pp. 280-290. ISSN 15477029

Mohammed, B.S. and Syed, Z.I. and Khed, V. and Qasim, M.S. (2017) Evaluation of nano-silica modified ECC based on ultrasonic pulse velocity and rebound hammer. Open Civil Engineering Journal, 11. pp. 638-649. ISSN 18741495

Syed, Z.I. and Mendis, P. and Rahman, S.A. (2016) Effect of large negative phase of blast loading on structural response of RC elements. In: UNSPECIFIED.

Setvati, M.R. and Mustaffa, Z. and Shafiq, N. and Isnadi, B. and Syed, Z.I. (2016) Finite element modeling of wet lay-up CFRP patch repaired corroded offshore steel jacket member. In: UNSPECIFIED.

Setvati, M.R. and Mustaffa, Z. and Isnadi, B. and Shafiq, N. and Syed, Z.I. and Kim, D.K. (2016) Meso-scale numerical study of composite patch repaired hole drilled steel plate. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1724-1728. ISSN 18196608

Syed, Z.I. and Mohamed, O.A. and Rahman, S.A. (2016) Non-linear Finite Element Analysis of Offshore Stainless Steel Blast Wall under High Impulsive Pressure Loads. In: UNSPECIFIED.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Prediction of RC beams failure load using non-linear finite element analysis. International Journal of Applied Engineering Research, 10 (22). pp. 42974-42980. ISSN 09734562

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Root cause of reinforced concrete dapped-end beams failure. International Journal of Applied Engineering Research, 10 (22). pp. 42927-42933. ISSN 09734562

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Shear Failure of RC Dapped-End Beams. Advances in Materials Science and Engineering, 2015. ISSN 16878434

Palaniandy, D.K. and Syed, Z.I. and Liew, M.S. and Karuppanan, S. (2014) Broadside vessel collision forces for conventional riser-guard. Applied Mechanics and Materials, 567. pp. 210-215. ISSN 16609336

Syed, Z.I. and Palaniandy, D.K. and Liew, M.S. (2014) Damage assessment of offshore riser-guards under accidental vessel impact. In: UNSPECIFIED.

Syed, Z.I. and Liew, M.S. and Mendis, P. (2014) Performance of simplified damage assessment tools for reinforced concrete panels under blast loading. Key Engineering Materials, 594-59. pp. 492-497. ISSN 10139826

Aswin, M. and Syed, Z.I. and Wee, T. and Liew, M.S. (2014) Prediction of failure loads of RC dapped-end beams. Applied Mechanics and Materials, 567. pp. 463-468. ISSN 16609336

Syed, Z.I. and Liew, M.S. and Hasan, M.H. and Venkatesan, S. (2014) Single-degree-of-freedom based pressure-impulse diagrams for blast damage assessment. Applied Mechanics and Materials, 567. pp. 499-504. ISSN 16609336

Rahman, S.A. and Syed, Z.I. and John, K.V. and Liew, M.S. (2014) Structural response of offshore blast walls under accidental explosion. Advanced Materials Research, 1043. pp. 278-282. ISSN 10226680

Setvati, M.R. and Shafiq, N. and Mustaffa, Z. and Syed, Z.I. (2014) A review on composite materials for offshore structures. In: UNSPECIFIED.