Article

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Sharif, T. and Sajid, Z. and Hussnain, S.M. and Choudhry, R.S. (2024) Bearing performance and damage characteristics of rein-infused thermoplastic 3D woven composites bolted joints. Polymer Composites, 45 (1). pp. 631-652.

Sajid, Z. and Karuppanan, S. and Eng, K.K. and Shah, S.Z.H. (2023) Analytical Method for the Optimization of the Open-Hole and Filled-Hole Laminates at the Preliminary Design Stage. Materials, 16 (6).

Shah, S.Z.H. and Altaf, K. and Lee, J. and Sharif, T. and Choudhry, R.S. and Hussain, S.M. (2023) Bending performance and failure mechanisms of hybrid and regular sandwich composite structures with 3D printed corrugated cores. Composite Structures, 325.

Hussnain, S.M. and Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Hussain, M.Z. (2023) Degradation and mechanical performance of fibre-reinforced polymer composites under marine environments: A review of recent advancements. Polymer Degradation and Stability, 215.

Ismail, M.R. and Ismail, M.C. and Shah, S.Z.H. (2023) Effect of Acetate on Microbiologically Influenced Corrosion of Internal Pipeline Surfaces. Metals, 13 (12).

Sharifi, A.M. and Kwon, D.-J. and Shah, S.Z.H. and Lee, J. (2023) Modeling of frontal polymerization of carbon fiber and dicyclopentadiene woven composites with stochastic material uncertainty. Composite Structures, 326.

Shah, S.Z.H. and Lee, J. and Megat-Yusoff, P.S.M. and Hussain, S.Z. and Sharif, T. and Choudhry, R.S. (2023) Multiscale damage modelling of notched and un-notched 3D woven composites with randomly distributed manufacturing defects. Composite Structures, 318.

Odiyi, D.C. and Sharif, T. and Choudhry, R.S. and Mallik, S. and Shah, S.Z.H. (2023) A review of advancements in synthesis, manufacturing and properties of environment friendly biobased Polyfurfuryl Alcohol Resin and its Composites. Composites Part B: Engineering, 267. ISSN 13598368

Sajid, Z. and Karuppanan, S. and Kee, K.E. and Sallih, N. and Shah, S.Z.H. (2022) Bearing performance improvement of single-lap, single-bolt basalt composite joints by locally strengthening the joint location using carbon fibre. Thin-Walled Structures, 180. ISSN 02638231

Sajid, Z. and Karuppanan, S. and Shah, S.Z.H. (2022) Effect of Washer Size and Tightening Torque on Bearing Performance of Basalt Fiber Composite Bolted Joints. Journal of Natural Fibers, 19 (13). pp. 5910-5927. ISSN 15440478

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. (2022) Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites. Applied Composite Materials, 29 (2). pp. 515-545. ISSN 0929189X

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Sajid, Z. (2022) Off-Axis and On-Axis Performance of Novel Acrylic Thermoplastic (Elium®) 3D Fibre-Reinforced Composites under Flexure Load. Polymers, 14 (11). ISSN 20734360

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Sharif, T. and Hussain, S.Z. and Choudhry, R.S. (2022) Off-axis tensile performance of notched resin-infused thermoplastic 3D fibre-reinforced composites. Mechanics of Materials, 175. ISSN 01676636

Shah, S.Z.H. and Lee, J. (2022) Stochastic lightning damage prediction of carbon/epoxy composites with material uncertainties. Composite Structures, 282. ISSN 02638223

Sajid, Z. and Karuppanan, S. and Kee, K.E. and Sallih, N. and Shah, S.Z.H. (2021) Carbon/basalt hybrid composite bolted joint for improved bearing performance and cost efficiency. Composite Structures, 275. ISSN 02638223

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ud Din, I. and Othman, A.R. and Sharp, K. and Gerard, P. (2021) Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering, 207. ISSN 13598368

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Choudhry, R.S. and Sajid, Z. and Din, I.U. (2021) Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites. Composites Communications, 28. ISSN 24522139

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Sajid, Z. (2021) Multiscale damage modelling of 3D woven composites under static and impact loads. Composites Part A: Applied Science and Manufacturing, 151. ISSN 1359835X

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. and Gerard, P. and Sharp, K. (2021) Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading. International Journal of Mechanical Sciences, 189. ISSN 00207403

Sajid, Z. and Karuppanan, S. and Sallih, N. and Kee, K.E. and Shah, S.Z.H. (2021) Role of washer size in mitigating adverse effects of bolt-hole clearance in a single-lap, single-bolt basalt composite joint. Composite Structures, 266. ISSN 02638223

Shah, S.Z.H. and Megat Yusoff, P.S.M. and Karuppanan, S. and Sajid, Z. (2020) Elastic constants prediction of 3d fiber-reinforced composites using multiscale homogenization. Processes, 8 (6). pp. 1-12. ISSN 22279717

Sajid, Z. and Karuppanan, S. and Shah, S.Z.H. (2020) Open-hole and filled-hole failure envelopes of bfrp and gfrp: A comparative study. Lecture Notes in Mechanical Engineering. pp. 391-398. ISSN 21954356

Din, I.U. and Tu, S. and Hao, P. and Panier, S. and Khan, K.A. and Umer, R. and Shah, S.Z.H. and Franz, G. and Aamir, M. (2020) Sequential damage study induced in fiber reinforced composites by shear and tensile stress using a newly developed Arcan fixture. Journal of Materials Research and Technology, 9 (6). pp. 13352-13364. ISSN 22387854

Shah, S.Z.H. and Choudhry, R.S. and Mahadzir, S. (2020) A new approach for strength and stiffness prediction of discontinuous fibre reinforced composites (DFC). Composites Part B: Engineering, 183. ISSN 13598368

Shah, S.Z.H. and Karuppanan, S. and Megat-Yusoff, P.S.M. and Sajid, Z. (2019) Impact resistance and damage tolerance of fiber reinforced composites: A review. Composite Structures, 217. pp. 100-121. ISSN 02638223

Conference or Workshop Item

Lee, J. and Shah, S.Z.H. (2022) Predicting Stochastic Lightning Mechanical Damage Effects on Carbon Fiber Reinforced Polymer Matrix Composites. In: UNSPECIFIED.