Article

Sattar, M. and Othman, A.R. and Muzamil, M. and Kamaruddin, S. and Akhtar, M. and Khan, R. (2023) Correlation Analysis of Established Creep Failure Models through Computational Modelling for SS-304 Material. Metals, 13 (2).

Sattar, M. and Othman, A.R. and Othman, M.F. and Ali, H.T. and Khan, M.K. (2023) New Creep Crack Growth Prediction Model for the Life Assessment of Stainless-Steel Material Using Computational Modeling. Metals, 13 (11).

Shazad, A. and Jadoon, J. and Uzair, M. and Akhtar, M. and Shakoor, A. and Muzamil, M. and Sattar, M. (2022) Effect of composition and microstructure on the rusting of MS rebars and ultimately their impact on mechanical behavior. Transactions of the Canadian Society for Mechanical Engineering, 46 (4). pp. 685-696. ISSN 03158977

Sattar, M. and Othman, A.R. and Kamaruddin, S. and Akhtar, M. and Khan, R. (2022) Limitations on the computational analysis of creep failure models: A review. Engineering Failure Analysis, 134. ISSN 13506307

Masood, F. and Nor, N.B.M. and Elamvazuthi, I. and Saidur, R. and Alam, M.A. and Akhter, J. and Yusuf, M. and Ali, S.M. and Sattar, M. and Baba, M. (2022) The compound parabolic concentrators for solar photovoltaic applications: Opportunities and challenges. Energy Reports, 8. pp. 13558-13584. ISSN 23524847

Akhtar, M. and Lashari, M.I. and Muzamil, M. and Sattar, M. and Shabir, M.I. and Mohsin, S. and Samiuddin, M. (2021) Comparative investigation of corrosion rate on A-36 steel with different coatings include ZnO and TiO2 nanoparticles using linear polarization resistance technique Comparación de la velocidad de corrosión del acero A-36 recubierto con nanopartículas de ZnO y TiO2 utilizando la resistencia de polarización lineal. Revista de Metalurgia, 57 (2). ISSN 00348570

Sattar, M. and Othman, A.R. and Kamaruddin, S. and Alam, M.A. and Azeem, M. (2021) Creep parameters determination by omega model to norton bailey law by regression analysis for austenitic steel ss-304. Solid State Phenomena, 324 SS. pp. 188-197. ISSN 10120394

Sattar, M. and Othman, A.R. and Akhtar, M. and Kamaruddin, S. and Khan, R. and Masood, F. and Alam, M.A. and Azeem, M. and Mohsin, S. (2021) Curve fitting for damage evolution through regression analysis for the kachanov�rabotnov model to the norton�bailey creep law of ss-316 material. Materials, 14 (19). ISSN 19961944

Azeem, M. and Ya, H.H. and Alam, M.A. and Sultan, T.H. and Ali, M. and Sattar, M. and Ahmad, T. and Hatami, H. and Sadique, M.R. and Mokhtar, A.A. and Mustapha, M. and Khan, M.A. and Masood, F. (2021) Macroscale assessment of low-velocity impact on hybrid composite laminates Makroskalige Bewertung des Einflusses niedriger Aufprallgeschwindigkeit auf hybride Verbundlaminate. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1101-1111. ISSN 09335137

Alam, M.A. and Ya, H.H. and Yusuf, M. and Sivraj, R. and Mamat, O.B. and Sapuan, S.M. and Masood, F. and Parveez, B. and Sattar, M. (2021) Modeling, optimization and performance evaluation of tic/graphite reinforced al 7075 hybrid composites using response surface methodology. Materials, 14 (16). ISSN 19961944