Items where Author is "Sasmito, A.P."
Article
Liaw, K.L. and Kurnia, J.C. and Sallih, N. and Mustapha, M. and Sasmito, A.P. (2024) Heat transfer analysis of subcooled flow boiling in copper foam helical coiled heat exchanger � A pore-scale numerical study. International Communications in Heat and Mass Transfer, 155. ISSN 07351933
Liaw, K.L. and Ahmadihosseini, A. and Rosle, A.F.H.B. and Kurnia, J.C. and Sasmito, A.P. (2023) Enhanced performance of pinned metal foam heat sinks with dielectric coolant � A pore-scale numerical study. International Communications in Heat and Mass Transfer, 149.
Liaw, K.L. and Kurnia, J.C. and Putra, Z.A. and Aziz, M. and Sasmito, A.P. (2023) Enhanced turbulent convective heat transfer in helical twisted Multilobe tubes. International Journal of Heat and Mass Transfer, 202.
Haryoko, L.A.F. and Sasmito, A.P. and Kurnia, J.C. (2023) Numerical Investigation of Laminar Convective Heat Transfer of Nanofluid in Parallel Cooling Channels. Lecture Notes in Mechanical Engineering. pp. 249-262.
Kurnia, J.C. and Chaedir, B. and Wijayanta, A.T. and Sasmito, A.P. (2022) Convective Heat Transfer Enhancement of Laminar Herschel�Bulkley Non-Newtonian Fluid in Straight and Helical Heat Exchangers with Twisted Tape Inserts. Industrial and Engineering Chemistry Research, 61 (1). pp. 814-844. ISSN 08885885
Kurnia, J.C. and Ahmadihosseini, A. and Sasmito, A.P. (2022) Flow behavior and mixing of single-phase laminar Newtonian miscible fluid in T-junction micromixer with twisted mixing channel - A numerical study. Chemical Engineering and Processing - Process Intensification, 181. ISSN 02552701
Kurnia, J.C. and Shatri, M.S. and Putra, Z.A. and Zaini, J. and Caesarendra, W. and Sasmito, A.P. (2022) Geothermal energy extraction using abandoned oil and gas wells: Techno-economic and policy review. International Journal of Energy Research, 46 (1). pp. 28-60. ISSN 0363907X
Liaw, K.L. and Kurnia, J.C. and Sasmito, A.P. (2022) Laminar convective heat transfer in helical twisted multilobe tubes. Case Studies in Thermal Engineering, 39. ISSN 2214157X
Kurnia, J.C. and Haryoko, L.A.F. and Taufiqurrahman, I. and Chen, L. and Jiang, L. and Sasmito, A.P. (2022) Optimization of an innovative hybrid thermal energy storage with phase change material (PCM) wall insulator utilizing Taguchi method. Journal of Energy Storage, 49. ISSN 2352152X
Agson-Gani, P.H. and Zueter, A.F. and Xu, M. and Ghoreishi-Madiseh, S.A. and Kurnia, J.C. and Sasmito, A.P. (2022) Thermal and hydraulic analysis of a novel double-pipe geothermal heat exchanger with a controlled fractured zone at the well bottom. Applied Energy, 310. ISSN 03062619
Chaedir, B.A. and Kurnia, J.C. and Sasmito, A.P. and Mujumdar, A.S. (2021) Advances in dewatering and drying in mineral processing. Drying Technology, 39 (11). pp. 1667-1684. ISSN 07373937
Kurnia, J.C. and Sasmito, A.P. (2021) Catalyst special issue on catalytic reactors design for industrial applications. Catalysts, 11 (4). ISSN 20734344
Kurnia, J.C. and Putra, Z.A. and Muraza, O. and Ghoreishi-Madiseh, S.A. and Sasmito, A.P. (2021) Numerical evaluation, process design and techno-economic analysis of geothermal energy extraction from abandoned oil wells in Malaysia. Renewable Energy, 175. pp. 868-879. ISSN 09601481
Kurnia, J.C. and Chaedir, B.A. and Sasmito, A.P. and Shamim, T. (2021) Progress on open cathode proton exchange membrane fuel cell: Performance, designs, challenges and future directions. Applied Energy, 283. ISSN 03062619
Liaw, K.L. and Kurnia, J.C. and Sasmito, A.P. (2021) Turbulent convective heat transfer in helical tube with twisted tape insert. International Journal of Heat and Mass Transfer, 169. ISSN 00179310
Kalantari, H. and Ghoreishi-Madiseh, S.A. and Kurnia, J.C. and Sasmito, A.P. (2021) An analytical correlation for conjugate heat transfer in fin and tube heat exchangers. International Journal of Thermal Sciences, 164. ISSN 12900729
Fong, M. and Kurnia, J. and Sasmito, A.P. (2020) Application of phase change material-based thermal capacitor in double tube heat exchanger�A numerical investigation. Energies, 13 (17). ISSN 19961073
Kurnia, J.C. and Ghoreishi-Madiseh, S.A. and Sasmito, A.P. (2020) Heat Transfer and Entropy Generation in Concentric/Eccentric Double-Pipe Helical Heat Exchangers. Heat Transfer Engineering, 41 (18). pp. 1552-1575. ISSN 01457632
Kurnia, J.C. and Chaedir, B.A. and Sasmito, A.P. (2020) Laminar convective heat transfer in helical tube with twisted tape insert. International Journal of Heat and Mass Transfer, 150. ISSN 00179310
Templeton, J.D. and Ghoreishi-Madiseh, S.A. and Hassani, F.P. and Sasmito, A.P. and Kurnia, J.C. (2020) Numerical and experimental study of transient conjugate heat transfer in helical closed-loop geothermal heat exchangers for application of thermal energy storage in backfilled mine stopes. International Journal of Energy Research, 44 (12). pp. 9609-9616. ISSN 0363907X
Haryoko, L.A.F. and Kurnia, J.C. and Sasmito, A.P. (2020) Numerical investigation of subcooled boiling heat transfer in helically-coiled tube. International Journal of Automotive and Mechanical Engineering, 17 (1). pp. 7675-7686. ISSN 22298649
Chaedir, B.A. and Kurnia, J.C. and Chen, L. and Jiang, L. and Sasmito, A.P. (2020) Numerical investigation of ventilation air methane catalytic combustion in circular straight and helical coil channels with twisted tape insert in catalytic-monolith reactors. Catalysts, 10 (7). pp. 1-25. ISSN 20734344
Kurnia, J.C. and Sasmito, A.P. (2020) Performance Evaluation of Liquid Mixing in a T-Junction Passive Micromixer with a Twisted Tape Insert. Industrial and Engineering Chemistry Research, 59 (9). pp. 3904-3915. ISSN 08885885
Kurnia, J.C. and Sasmito, A.P. and Shamim, T. (2019) Advances in proton exchange membrane fuel cell with dead-end anode operation: A review. Applied Energy, 252. ISSN 03062619
Kurnia, J.C. and Lim, D.C. and Chen, L. and Jiang, L. and Sasmito, A.P. (2019) Entropy generation and heat transfer performance in microchannel cooling. Entropy, 21 (2). ISSN 10994300
Kurnia, J.C. and Chaedir, B.A. and Lim, D.C. and Chen, L. and Jiang, L. and Sasmito, A.P. (2019) Numerical evaluation of potential catalyst savings for ventilation air methane catalytic combustion in helical coil reactors with selective wall coating. Catalysts, 9 (4). ISSN 20734344
Fong, M. and Alzoubi, M.A. and Kurnia, J.C. and Sasmito, A.P. (2019) On the performance of ground coupled seasonal thermal energy storage for heating and cooling: A Canadian context. Applied Energy, 250. pp. 593-604. ISSN 03062619
Cheng, S.W.Y. and Kurnia, J.C. and Ghoreishi-Madiseh, S.A. and Sasmito, A.P. (2019) Optimization of geothermal energy extraction from abandoned oil well with a novel well bottom curvature design utilizing Taguchi method. Energy, 188. ISSN 03605442
Adi Putra, Z. and Kurnia, J.C. and Sasmito, A.P. and Muraza, O. (2019) Process design and techno-economic analysis of ethyl levulinate production from carbon dioxide and 1,4-butanediol as an alternative biofuel and fuel additive. International Journal of Energy Research, 43 (11). pp. 5932-5945. ISSN 0363907X
Kurnia, J.C. and Sasmito, A.P. (2018) Numerical investigation of heat transfer performance of a rotating latent heat thermal energy storage. Applied Energy, 227. pp. 542-554. ISSN 03062619
Sasmito, A.P. and Kurnia, J.C. and Shamim, T. and Mujumdar, A.S. (2017) Optimization of an open-cathode polymer electrolyte fuel cells stack utilizing Taguchi method. Applied Energy, 185. pp. 1225-1232. ISSN 03062619
Kurnia, J.C. and Sasmito, A.P. and Xu, P. and Mujumdar, A.S. (2017) Performance and potential energy saving of thermal dryer with intermittent impinging jet. Applied Thermal Engineering, 113. pp. 246-258. ISSN 13594311
Kurnia, J.C. and Sasmito, A.P. and Shamim, T. (2017) Performance evaluation of a PEM fuel cell stack with variable inlet flows under simulated driving cycle conditions. Applied Energy, 206. pp. 751-764. ISSN 03062619
Yueze, L. and Akhtar, S. and Sasmito, A.P. and Kurnia, J.C. (2017) Prediction of air flow, methane, and coal dust dispersion in a room and pillar mining face. International Journal of Mining Science and Technology, 27 (4). pp. 657-662. ISSN 20952686
Kurnia, J.C. and Jangam, S.V. and Akhtar, S. and Sasmito, A.P. and Mujumdar, A.S. (2016) Advances in biofuel production from oil palm and palm oil processing wastes: A review. Biofuel Research Journal, 3 (1). pp. 332-346. ISSN 22928782
Kurnia, J.C. and Sasmito, A.P. (2016) Heat transfer performance of non-circular coiled tubes - research summary, challenges and directions. International Journal of Automotive and Mechanical Engineering, 13 (3). pp. 3710-3727. ISSN 22298649
Kurnia, J.C. and Sasmito, A.P. and Shamim, T. and Mujumdar, A.S. (2016) Numerical investigation of heat transfer and entropy generation of laminar flow in helical tubes with various cross sections. Applied Thermal Engineering, 102. pp. 849-860. ISSN 13594311
Kurnia, J.C. and Sasmito, A.P. and Mujumdar, A.S. (2016) Potential catalyst savings in heterogeneous gaseous spiral coiled reactor utilizing selective wall coating - A computational study. Computers and Chemical Engineering, 88. pp. 59-72. ISSN 00981354
Kurnia, J.C. and Sasmito, A.P. and Mujumdar, A.S. (2016) Thermal Performance of Coiled Square Tubes at Large Temperature Differences for Heat Exchanger Application. Heat Transfer Engineering, 37 (16). pp. 1341-1356. ISSN 01457632
Kurnia, J.C. and Xu, P. and Sasmito, A.P. (2016) A novel concept of enhanced gas recovery strategy from ventilation air methane in underground coal mines � A computational investigation. Journal of Natural Gas Science and Engineering, 35. pp. 661-672. ISSN 18755100
Sasmito, A.P. and Kurnia, J.C. and Birgersson, E. and Mujumdar, A.S. (2015) Computational evaluation of thermal management strategies in an underground mine. Applied Thermal Engineering, 90. pp. 1144-1150. ISSN 13594311
Kurnia, J.C. and Sasmito, A.P. and Hassani, F.P. and Mujumdar, A.S. (2015) Introduction and evaluation of a novel hybrid brattice for improved dust control in underground mining faces: A computational study. International Journal of Mining Science and Technology, 25 (4). pp. 537-543. ISSN 20952686
Conference or Workshop Item
Chin, A.R. and Kurnia, J.C. and Sasmito, A.P. (2022) Pore-Scale Modelling in Metal Foam Heat Exchanger. In: UNSPECIFIED.
Kee, L.H. and Kurnia, J.C. and Haryoko, L.A.F. and Riyandwita, B.W. and Sasmito, A.P. (2020) Experimental investigation of the performance of thermal energy storage with embedded phase change materials as wall insulator. In: UNSPECIFIED.
Haryoko, L.A.F. and Kurnia, J.C. and Sasmito, A.P. (2020) Forced convection boiling heat transfer inside helically-coiled heat exchanger. In: UNSPECIFIED.
Fong, M. and Alzoubi, M. and Sasmito, A.P. and Kurnia, J.C. (2019) Performance evaluation of ground-coupled seasonal thermal energy storage with high resolution weather data: Case study of Calgary Canada. In: UNSPECIFIED.
Templeton, J.D. and Ghoreishi-Madiseh, S.A. and Hassani, F.P. and Sasmito, A.P. and Kurnia, J.C. (2019) Study of transient conjugate heat transfer in helical closed-loop geothermal heat exchangers for application of thermal energy storage in backfilled mine stopes. In: UNSPECIFIED.
Cheng, S.W.Y. and Kurnia, J.C. and Sasmito, A.P. and Lubis, L.A. (2019) The effect of triangular protrusions on geothermal wellbore heat exchanger from retrofitted abandoned oil wells. In: UNSPECIFIED.
Kurnia, J.C. and Sasmito, A.P. (2018) Numerical Evaluation of Heat Transfer and Entropy Generation of Helical Tubes with Various Cross-sections under Constant Heat Flux Condition. In: UNSPECIFIED.
Kurnia, J.C. and Sasmito, A.P. (2017) Heat transfer performance and entropy generation of helical square tubes with various curvature radiuses. In: UNSPECIFIED.
Kurnia, J.C. and Sasmito, A.P. and Ping, S.I. (2017) Investigation of Heat Transfer on a Rotating Latent Heat Energy Storage. In: UNSPECIFIED.
Kurnia, J.C. and Sasmito, A.P. (2017) Numerical investigation of phase change materials thermal capacitor for pipe flow. In: UNSPECIFIED.
Kurnia, J.C. and Sasmito, A.P. and Akhtar, S. and Shamim, T. and Mujumdar, A.S. (2015) Numerical Investigation of Heat Transfer Performance of Various Coiled Square Tubes for Heat Exchanger Application. In: UNSPECIFIED.
Sasmito, A.P. and Kurnia, J.C. and Shamim, T. and Mujumdar, A.S. (2015) Optimization of Design Parameters for an Open-cathode Polymer Electrolyte Fuel Cells Stack Utilizing Taguchi Method. In: UNSPECIFIED.
Book
Kurnia, J.C. and Sasmito, A.P. (2019) Hydrogen fuel cell in vehicle propulsion: Performance, efficiency, and challenge. Springer Singapore, pp. 9-26. ISBN 9789811501029; 9789811501012
Kurnia, J.C. and Xu, P. and Sasmito, A.P. and Mujumdar, A.S. (2019) Thermal drying utilizing intermittent and pulsating impinging jet. CRC Press, pp. 105-129. ISBN 9781351019217; 9781138497269