Article

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Sharif, T. and Sajid, Z. and Hussnain, S.M. and Choudhry, R.S. (2024) Bearing performance and damage characteristics of rein-infused thermoplastic 3D woven composites bolted joints. Polymer Composites, 45 (1). pp. 631-652.

Azeem, M. and Ya, H.H. and Azad Alam, M. and Kumar, M. and Sajid, Z. and Gohari, S. and Maziz, A. and Gemi, L. and Abdullah, S.I.B.S. and Khan, S.H. (2024) Influence of winding angles on hoop stress in composite pressure vessels: Finite element analysis. Results in Engineering, 21.

Sajid, Z. and Karuppanan, S. and Eng, K.K. and Shah, S.Z.H. (2023) Analytical Method for the Optimization of the Open-Hole and Filled-Hole Laminates at the Preliminary Design Stage. Materials, 16 (6).

Sajid, Z. and Karuppanan, S. and Kee, K.E. and Sallih, N. and Shah, S.Z.H. (2022) Bearing performance improvement of single-lap, single-bolt basalt composite joints by locally strengthening the joint location using carbon fibre. Thin-Walled Structures, 180. ISSN 02638231

Sajid, Z. and Karuppanan, S. and Shah, S.Z.H. (2022) Effect of Washer Size and Tightening Torque on Bearing Performance of Basalt Fiber Composite Bolted Joints. Journal of Natural Fibers, 19 (13). pp. 5910-5927. ISSN 15440478

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. (2022) Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites. Applied Composite Materials, 29 (2). pp. 515-545. ISSN 0929189X

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Sajid, Z. (2022) Off-Axis and On-Axis Performance of Novel Acrylic Thermoplastic (Elium®) 3D Fibre-Reinforced Composites under Flexure Load. Polymers, 14 (11). ISSN 20734360

Dar, Q.U.Z. and Pu, R. and Baiyegunhi, C. and Shabeer, G. and Ali, R.I. and Ashraf, U. and Sajid, Z. and Mehmood, M. (2022) The impact of diagenesis on the reservoir quality of the early Cretaceous Lower Goru sandstones in the Lower Indus Basin, Pakistan. Journal of Petroleum Exploration and Production Technology, 12 (5). pp. 1437-1452. ISSN 21900558

Sajid, Z. and Karuppanan, S. and Kee, K.E. and Sallih, N. and Shah, S.Z.H. (2021) Carbon/basalt hybrid composite bolted joint for improved bearing performance and cost efficiency. Composite Structures, 275. ISSN 02638223

Ahmed, N. and Siddiqui, N.A. and Jamil, M. and bin Ismail, M.S. and Mo-hamed Ahmed Salim, A. and Sajid, Z. and Usman, M. and Gul, Z. and Kasim, S.A. and ul Haq, I. and Imran, Q.S. and Haroon Ali, S. (2021) Deep Marine Turbiditic Belaga Formation of Late Cretaceous�Late Eocene in Central Sarawak, Malaysia: Implications for Sediment Transport and Distribution of Total Organic Carbon (TOC). Petroleum and Coal, 63 (1). pp. 96-106. ISSN 13377027

Sajid, Z. and Azmi, M.A.B.M. and Karuppanan, S. (2021) Effect of hybridization on the buckling behavior of perforated CFRP/BFRP laminates. Emerging Materials Research, 10 (1). pp. 66-74. ISSN 20460147

Rana, K.I. and Sajid, Z. and Tao, J. and Khan, L.A. (2021) Effect of vacuum manipulation on inter laminar shear strength and flexural strength in double bag vacuum infusion moulding. Polymers and Polymer Composites, 29 (9suppl). S432-S440. ISSN 09673911

Ahmed, N. and Siddiqui, N.A. and H. B. A. Rahman, A. and Jamil, M. and Usman, M. and Sajid, Z. and Kamal Zaidi, F. (2021) Evaluation of hydrocarbon source rock potential: Deep marine shales of Belaga Formation of Late Cretaceous-Late Eocene, Sarawak, Malaysia. Journal of King Saud University - Science, 33 (1). ISSN 10183647

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Choudhry, R.S. and Sajid, Z. and Din, I.U. (2021) Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites. Composites Communications, 28. ISSN 24522139

Ahmed, N. and Siddiqui, N.A. and Ramasamy, N. and Ramkumar, M. and Jamil, M. and Usman, M. and Sajid, Z. and Rahman, A.H.B.A. (2021) Geochemistry of Eocene Bawang Member turbidites of the Belaga Formation, Borneo: Implications for provenance, palaeoweathering, and tectonic setting. Geological Journal, 56 (5). pp. 2477-2499. ISSN 00721050

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Sajid, Z. (2021) Multiscale damage modelling of 3D woven composites under static and impact loads. Composites Part A: Applied Science and Manufacturing, 151. ISSN 1359835X

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. and Gerard, P. and Sharp, K. (2021) Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading. International Journal of Mechanical Sciences, 189. ISSN 00207403

Dar, Q.U.Z. and Renhai, P. and Sajid, Z. and Mehmood, M. and Wahab, A. and Khan, M.J. and Latif, T. (2021) The Provenance and Tectonic Settings of the Greywacke Member of the Late Neoproterozoic Hazara Formation Lesser Himalayas, Northern Pakistan: Evidence from Geochemistry and Petrography. Sains Malaysiana, 50 (12). pp. 3505-3522. ISSN 01266039

Sajid, Z. and Karuppanan, S. and Sallih, N. and Kee, K.E. and Shah, S.Z.H. (2021) Role of washer size in mitigating adverse effects of bolt-hole clearance in a single-lap, single-bolt basalt composite joint. Composite Structures, 266. ISSN 02638223

Shah, S.Z.H. and Megat Yusoff, P.S.M. and Karuppanan, S. and Sajid, Z. (2020) Elastic constants prediction of 3d fiber-reinforced composites using multiscale homogenization. Processes, 8 (6). pp. 1-12. ISSN 22279717

Sajid, Z. and Ismail, M.S. and Zakariah, M.N.A. and Tsegab, H. and Vintaned, J.A.G. and Hanif, T. and Ahmed, N. (2020) Impact of paleosalinity, paleoredox, paleoproductivity/preservation on the organic matter enrichment in black shales from triassic turbidites of semanggol basin, peninsular malaysia. Minerals, 10 (10). pp. 1-34. ISSN 2075163X

Sajid, Z. and Karuppanan, S. and Shah, S.Z.H. (2020) Open-hole and filled-hole failure envelopes of bfrp and gfrp: A comparative study. Lecture Notes in Mechanical Engineering. pp. 391-398. ISSN 21954356

Sajid, Z. and Ismail, M.S. and Hanif, T. and Tsegab, H. and Ali, S. and Ahmed, N. (2020) Sedimentary Characteristics, Xrd, Ftir, Uv-Vis And Rock-Eval Pyrolysis of Black Shale Intervals of the Semantan Formation, Peninsular Malaysia. ARPN Journal of Engineering and Applied Sciences, 15 (23). pp. 2778-2792. ISSN 18196608

Shah, S.Z.H. and Karuppanan, S. and Megat-Yusoff, P.S.M. and Sajid, Z. (2019) Impact resistance and damage tolerance of fiber reinforced composites: A review. Composite Structures, 217. pp. 100-121. ISSN 02638223

Conference or Workshop Item

Haq, I.U. and Padmanabhan, E. and Khan, J.A. and Sajid, Z. (2021) Factors Affecting Methane Adsorption and Storage in Black Shales of Varying Maturity and Kerogen Type. In: UNSPECIFIED.

Haq, I.U. and Padmanabhan, E. and Khan, J.A. and Sajid, Z. (2021) Factors Affecting Methane Adsorption and Storage in Black Shales of Varying Maturity and Kerogen Type. In: UNSPECIFIED.