Article

Tusher, H.M. and Nazir, S. and Mallam, S. and Yang, Z. and Asgher, U. and Rusli, R. (2024) Exploring the effects of automation malfunction on team communication and coordination in ships' engine rooms. Process Safety Progress, 43 (S1). S50-S62.

Idris, A.M. and Rusli, R. and Mohamed, M.E. and Ramli, A.F. and Nasif, M.S. and Lim, J.S. (2024) Explosion pressure and duration prediction using machine learning: A comparative study using classical models with Adam-optimized neural network. Canadian Journal of Chemical Engineering.

Malik, A.A. and Rusli, R. and Nazir, S. and Wong, R.H. and Arshad, U. (2024) Grid-based assessment of hydrogen leakages for an offshore process to improve the design and human performance. Process Safety Progress, 43 (S1). S35-S49.

Zainal Abidin, M. and Rusli, R. (2024) Special Issue Introduction LPA2023. Process Safety Progress, 43 (S1). S3. ISSN 10668527

Tusher, H.M. and Nazir, S. and Ghosh, S. and Rusli, R. (2023) Seeking the Best Practices of Assessment in Maritime Simulator Training. TransNav, 17 (1). pp. 105-114.

Tusher, H.M. and Nazir, S. and Mallam, S. and Rusli, R. and Botnmark, A.K. (2022) Learning from accidents: Nontechnical skills deficiency in the European process industry. Process Safety Progress, 41 (S1). S4-S9. ISSN 10668527

Lim, W.K. and Rusli, R. and Nazir, S. (2022) Offshore coxswain competency evaluation model for internal on-board competency monitoring and assessment. Process Safety Progress, 41 (S1). S159-S167. ISSN 10668527

Zainal Abidin, M. and Rusli, R. (2022) Special Issue: International Conference and Exhibition on Loss Prevention Asia 2021 (LPA 2021). Process Safety Progress, 41 (S1). S3. ISSN 10668527

Idris, A.M. and Rusli, R. and Nasif, M.S. and Ramli, A.F. and Lim, J.S. (2022) A fuzzy multi-objective optimisation model of risk-based gas detector placement methodology for explosion protection in oil and gas facilities. Process Safety and Environmental Protection, 161. pp. 571-582. ISSN 09575820

Halil, N. and Rusli, R. and Zainal Abidin, M. and Jamen, S. and Khan, F. (2022) An integrated health risk assessment with control banding for nanomaterials exposure. Process Safety Progress, 41 (S1). S84-S97. ISSN 10668527

Idris, A.M. and Ho, W.S. and Rusli, R. and Ramli, A.F. and Chee, W.C. and Hashim, H. and Muis, Z.A. and Lim, J.S. (2021) Optimal Sizing and Costing of Water-Energy Nexus System. Chemical Engineering Transactions, 89. pp. 583-588. ISSN 22839216

Abidin, M.Z. and Rusli, R. and Halil, N. (2020) Conceptual framework-hazard assessment of nanomaterıals using Bayesian network. Pertanika Journal of Science and Technology, 28 (Specia). pp. 1-13. ISSN 01287680

Yang, R. and Khan, F. and Neto, E.T. and Rusli, R. and Ji, J. (2020) Could pool fire alone cause a domino effect? Reliability Engineering and System Safety, 202. ISSN 09518320

Pham, L.H.H.P. and Rusli, R. and Shariff, A.M. and Khan, F. (2020) Dispersion of carbon dioxide bubble release from shallow subsea carbon dioxide storage to seawater. Continental Shelf Research, 196. ISSN 02784343

Yaqub, M.W. and Rusli, R. and Pendyala, R. (2020) Experimental study on gas-liquid-liquid three-phase flow patterns and the resultant pressure drop in a horizontal pipe upstream of the 90° bend. Chemical Engineering Science, 226. ISSN 00092509

Arunthavanathan, R. and Khan, F. and Ahmed, S. and Imtiaz, S. and Rusli, R. (2020) Fault detection and diagnosis in process system using artificial intelligence-based cognitive technique. Computers and Chemical Engineering, 134. ISSN 00981354

Yaqub, M.W. and Marappagounder, R. and Rusli, R. and Reddy Prasad, D.M. and Pendyala, R. (2020) Flow pattern identification and measurement techniques in gas-liquid-liquid three-phase flow: A review. Flow Measurement and Instrumentation, 76. ISSN 09555986

Idris, A.M. and Rusli, R. and Burok, N.A. and Mohd Nabil, N.H. and Ab Hadi, N.S. and Abdul Karim, A.H.M. and Ramli, A.F. and Mydin, I. (2020) Human factors influencing the reliability of fire and gas detection system. Process Safety Progress, 39 (S1). ISSN 10668527

Yazdi, M. and Khan, F. and Abbassi, R. and Rusli, R. (2020) Improved DEMATEL methodology for effective safety management decision-making. Safety Science, 127. ISSN 09257535

Tahoon, A.I. and Rusli, R. and Khan, F. and Zainal Abidin, M. (2020) Logic-based probabilistic network model to detect and track faults in a process system. Process Safety Progress, 39 (S1). ISSN 10668527

Yusoff, A.A. and Putra, Z.A. and Rusli, R. and Bilad, M.R. and Nordin, N.A.H.M. and Wirzal, M.D.H. (2020) Optimum plant design for relief safety system. Pertanika Journal of Science and Technology, 28 (Specia). pp. 37-56. ISSN 01287680

Ghosh, A. and Ahmed, S. and Khan, F. and Rusli, R. (2020) Process Safety Assessment Considering Multivariate Non-linear Dependence Among Process Variables. Process Safety and Environmental Protection, 135. pp. 70-80. ISSN 09575820

Yaqub, M.W. and Marappagounder, R. and Rusli, R. and D.M., R.P. and Pendyala, R. (2020) Review on gas�liquid�li. Chemical Engineering Research and Design, 159. pp. 505-528. ISSN 02638762

Rusli, R. and Nasif, M.S. (2020) Special Issue: International Conference and Exhibition on Loss Prevention Asia 2019, 25-26 November 2019. Process Safety Progress, 39 (S1). ISSN 10668527

Yaqub, M.W. and Pendyala, R. and Rusli, R. (2019) Oil-water phase inversion in the horizontal section of upstream 90° bend during gas-oil-water three-phase flow. Key Engineering Materials, 796. pp. 137-144. ISSN 10139826

Zainal Abidin, M. and Rusli, R. and Khan, F. and Mohd Shariff, A. (2018) Development of inherent safety benefits index to analyse the impact of inherent safety implementation. Process Safety and Environmental Protection, 117. pp. 454-472. ISSN 09575820

Zahari, S.H.N. and Rusli, R. and Buang, A. and Mohanan, K. (2018) Minimum ignition energy of aluminium nanopowders as engineered nanomaterials (ENMs). International Journal of Automotive and Mechanical Engineering, 15 (2). pp. 5285-5294. ISSN 22298649

Pham, L.H.H.P. and Rusli, R. and Laziz, A.M. (2018) Numerical analysis of initial CO2 bubbles leaked in seawater from ocean CO2 storage using volume of fluid method. International Journal of Automotive and Mechanical Engineering, 15 (2). p. 5389. ISSN 22298649

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2017) Interrelations between process safety management elements. Process Safety Progress, 36 (1). pp. 74-80. ISSN 10668527

Shariff, A.M. and Wahab, N.A. and Rusli, R. (2016) Assessing the hazards from a BLEVE and minimizing its impacts using the inherent safety concept. Journal of Loss Prevention in the Process Industries, 41. pp. 303-314. ISSN 09504230

Zainal Abidin, M. and Rusli, R. and Buang, A. and Mohd Shariff, A. and Khan, F.I. (2016) Resolving inherent safety conflict using quantitative and qualitative technique. Journal of Loss Prevention in the Process Industries, 44. pp. 95-111. ISSN 09504230

Wahab, N.A. and Rusli, R. and Shariff, A.M. and Rashid, E.A. and Ali, M.F.M. (2016) Selection of inherently safer preventive measures to reduce human error. Journal of Loss Prevention in the Process Industries, 41. pp. 323-332. ISSN 09504230

Zainal Abidin, M. and Rusli, R. and Mohd Shariff, A. and Khan, F.I. (2016) Three-Stage ISD Matrix (TIM) Tool to Review the Impact of Inherently Safer Design Implementation. Process Safety and Environmental Protection, 99. pp. 30-42. ISSN 09575820

Pham, L.H.H.P. and Rusli, R. (2016) A review of experimental and modelling methods for accidental release behaviour of high-pressurised CO2 pipelines at atmospheric environment. Process Safety and Environmental Protection, 104. pp. 48-84. ISSN 09575820

Abdul Majid, N.D. and Mohd Shariff, A. and Rusli, R. (2015) Process Safety Management (PSM) for managing contractors in process plant. Journal of Loss Prevention in the Process Industries, 37. pp. 82-90. ISSN 09504230

Wahab, N.D.A. and Rusli, R. and Mohd Shariff, A. and Buang, A. (2014) Assessment of human factor performance using Bayesian inference and inherent safety. Advanced Materials Research, 845. pp. 658-662. ISSN 10226680

Ab Kadir, N.A. and Rusli, R. and Zaina Abidin, N.A. (2014) CFD study on syngas dispersion for biomass process industry. Applied Mechanics and Materials, 625. pp. 410-413. ISSN 16609336

Pham, H.H.P.L. and Rusli, R. and Abdullah, M.Z. (2014) Consequence study of pressurized CO2 release containing impurities with obstacles. Applied Mechanics and Materials, 625. pp. 474-477. ISSN 16609336

Abdul Wahab, N. and Rusli, R. and Shariff, A.M. (2014) Evaluation of inherent safety strategies using FAHP to reduce human error. Advanced Materials Research, 917. pp. 332-341. ISSN 10226680

Aziz, H.A. and Shariff, A.M. and Rusli, R. and Yew, K.H. (2014) Managing process chemicals, technology and equipment information for pilot plant based on Process Safety Management standard. Process Safety and Environmental Protection, 92 (5). pp. 423-429. ISSN 09575820

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2014) Managing process safety information based on process safety management requirements. Process Safety Progress, 33 (1). pp. 41-48. ISSN 10668527

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2014) Operational Training Management System (OPTRAMS) for safe operation in process plant. Advanced Materials Research, 917. pp. 325-331. ISSN 10226680

Rusli, R. and Chang, E.J.T. and Pham, H.H.P.L. and Shariff, A.M. (2014) Solid carbon dioxide formation from rapid fluid expansion using integration of computational fluid dynamics and mathematical modelling. Chemical Engineering Transactions, 36. pp. 607-612. ISSN 22839216

Rusli, R. and Shariff, A.M. and Khan, F.I. (2013) Evaluating hazard conflicts using inherently safer design concept. Safety Science, 53. pp. 61-72. ISSN 09257535

Rusli, R. and Shariff, A.M. (2011) Evaluating inherently safer design alternatives using hazard conflict approach. WIT Transactions on Ecology and the Environment, 148. pp. 539-550. ISSN 17433541

Rusli, R. and Mohd Shariff, A. (2010) Qualitative Assessment for Inherently Safer Design (QAISD) at preliminary design stage. Journal of Loss Prevention in the Process Industries, 23 (1). pp. 157-165. ISSN 09504230

Mohd Shariff, A. and Rusli, R. and Leong, C.T. and Radhakrishnan, V.R. and Buang, A. (2006) Inherent safety tool for explosion consequences study. Journal of Loss Prevention in the Process Industries, 19 (5). pp. 409-418. ISSN 09504230

Conference or Workshop Item

Lim, W.K. and Rusli, R. and Buang, A. and Abdullah, T.S.W. (2023) Offshore Coxswain Competency Evaluation Tool (OC2ET) for Continuous Monitoring and Evaluation On-board Offshore Facilities. In: UNSPECIFIED.

Pham, L.H.H.P. and Rusli, R. and Keong, L.K. (2016) Consequence Study of CO2 Leakage from Ocean Storage. In: UNSPECIFIED.

Kadir, N.A.A. and Rusli, R. and Buang, A. and Rahim, N.S.A. (2016) Investigation of the Explosion Behaviour Affected by the Changes of Particle Size. In: UNSPECIFIED.

Abidin, M.Z. and Rusli, R. and Shariff, A.M. (2016) Technique for Order Performance by Similarity to Ideal Solution (TOPSIS)-entropy Methodology for Inherent Safety Design Decision Making Tool. In: UNSPECIFIED.

Majid, N.D.A. and Shariff, A.M. and Rusli, R. and Azman, K.I. (2016) Trade Secret Model Based on OSHA Process Safety Management Requirement. In: UNSPECIFIED.

Abidin, N.A.Z. and Ariffin, M.A. and Rusli, R. (2011) Preliminary risk assessment for the bench-scale of biomass gasification system. In: UNSPECIFIED.

Rusli, R. and Shariff, A.M. and Khan, F. and Amyotte, P. (2010) Using risk approach to indicate potential of hazard migrate in inherently safer design alternatives. In: UNSPECIFIED.

Book

Rusli, R. and Zainal Abidin, M. (2020) Inherent safety impact in complying process safety regulations and reducing human error. Elsevier, pp. 73-87. ISBN 9780128181096