Amadi, A. and Mohyaldinn, M. and Ridha, S. and Ola, V. (2024) Advancing engineering frontiers with NiTi shape memory alloys: A multifaceted review of properties, fabrication, and application potentials. Journal of Alloys and Compounds, 976.

Ali, F. and Negash, B.M. and Ridha, S. and Siddiqui, N.A. and Khan, J.A. and Elryes, A.A. (2024) Molecular Dynamics Perspective of Illite Wettability in Induced Acidic Conditions during Supercritical and Subcritical Carbon Dioxide Sequestration in Deep Saline Aquifers. Energy and Fuels, 38 (5). pp. 4368-4389.

Yusuf, M. and Ridha, S. and Kamyab, H. (2024) Recent progress in NP-Based Enhanced oil Recovery: Insights from molecular studies. Journal of Molecular Liquids, 396.

Amadi, A. and Mohyaldinn, M. and Ridha, S. (2024) Sand particle induced erosion in oil and gas screens: A review of influencing factors and wear dynamics. Powder Technology, 436.

Abduljabbar, A. and Amadi, A. and Mohyaldinn, M.E. and Ridha, S. and Younis, O. and Alakbari, F.S. (2024) Sand screens application and performance for sand control: A review of selection criteria, screen materials, and causes of failure. Heliyon, 10 (10).

Soni, A. and Das, P.K. and Yusuf, M. and Ridha, S. and Kamyab, H. and Chelliapan, S. and Kirpichnikova, I. and Mussa, Z.H. (2024) Valorization of Post-Consumers Plastics and Agro-Waste in Sustainable Polymeric Composites for Tribological Applications. Waste and Biomass Valorization, 15 (3). pp. 1739-1755. ISSN 18772641

Amadi, A.H. and Mohyaldinn, M. and Abduljabbar, A. and Ridha, S. and Avilala, P. and Owolabi, G.T. (2024) Wear Analysis of NiTi Sand Screens Using Altair Discrete Element Method. Materials, 17 (2).

Ali, F. and Negash, B.M. and Ridha, S. and Siddiqui, N.A. and Mim, R.T. and Elryes, A.A. (2024) Wettability alterations of amorphous shales in geological carbon storage: Impact of acidic conditions in deep saline aquifers. Geoenergy Science and Engineering, 234.

Abdullah, A.H. and Ridha, S. and Mohshim, D.F. and Maoinser, M.A. (2024) An experimental investigation into the rheological behavior and filtration loss properties of water-based drilling fluid enhanced with a polyethyleneimine-grafted graphene oxide nanocomposite. RSC Advances, 14 (15). pp. 10431-10444.

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Hussein, I.A. and Muhsan, A.S. and Ridha, S. and Salih, A.A. (2024) A gated recurrent unit model to predict Poisson's ratio using deep learning. Journal of Rock Mechanics and Geotechnical Engineering, 16 (1). pp. 123-135.

Ning, Y.C. and Ridha, S. and Ilyas, S.U. and Krishna, S. and Dzulkarnain, I. and Abdurrahman, M. (2023) Application of machine learning to determine the shear stress and filtration loss properties of nano-based drilling fluid. Journal of Petroleum Exploration and Production Technology, 13 (4). pp. 1031-1052.

Abduljabbar, A. and Eissa Mohyaldinn, M. and Ridha, S. and Younis, O. and Saeed Alakbari, F. (2023) CFD-based erosion modelling of sand screen using dense discrete phase model: Investigating carrier fluid type effect. Advanced Powder Technology, 34 (9).

Bataee, M. and Hebah, M.A. and Shabib-Asl, M. and Hamdi, Z. and Moradi, B. and Ridha, S. (2023) Determination of Optimal Distance Between Wells in SAGD and VAPEX Methods Using Reservoir Simulation. In: UNSPECIFIED.

Arain, A.H. and Ridha, S. and Ali, I. (2023) Development and performance evaluation of castor oil based biodiesel as an eco-friendly ester-based drilling fluid. Petroleum Science and Technology, 41 (19). pp. 1831-1851.

Hamza, M.F. and Soleimani, H. and Ridha, S. and Ahmed, A.A. and Sikiru, S. (2023) Double layer chemical encapsulation of SiO2 nanoparticles for interfacial tension reduction under low salinity condition. Journal of Molecular Liquids, 371.

Ali, I. and Ahmad, M. and Ridha, S. and Iferobia, C.C. and Lashari, N. (2023) Enhancing drilling mud performance through CMITS-modified formulations: rheological insights and performance optimization. RSC Advances, 13 (47). pp. 32904-32917.

Bataee, M. and Carter, R. and Hamdi, Z. and Ridha, S. (2023) Feasibility Study and LCoE Analysis of Geothermal Energy Production from Depleted Oil Fields and Gas Prospects Onshore Sarawak, Malaysia. In: UNSPECIFIED.

Ridha, S. and Khanbesh, S. and Arain, A.H. and Yusuf, M. and Krishna, S. (2023) Improved Predictive Model for Surge/Swab Pressure Estimation using a New Simplified (NS) Model. In: UNSPECIFIED.

Sauki, A. and Megat Khamaruddin, P.N.F. and Irawan, S. and Kinif, I. and Ridha, S. and Aziz, R.A. and Wan Bakar, W.Z. (2023) Prophecy of Cutting Transport Ratio through a Relationship between Equivalent Circulating Density and Drilled Solid Concentration. Key Engineering Materials, 939. pp. 83-91.

Soni, A. and Das, P.K. and Yusuf, M. and Ridha, S. and Kamyab, H. and Alam, M.A. and Masood, F. and Chelliapan, S. and Ubaidullah, M. and Pandit, B. and Prakash, C. (2023) Synergy of silica sand and waste plastics as thermoplastic composites on abrasive wear characteristics under conditions of different loads and sliding speeds. Chemosphere, 323.

Ali, F. and Negash, B.M. and Ridha, S. and Abdulelah, H. (2023) A review on the interfacial properties of caprock/CO2/brine system-implications for structural integrity of deep saline aquifers during geological carbon storage. Earth-Science Reviews, 247.

Sauki, A. and Khamaruddin, P.N.F.M. and Irawan, S. and Kinif, I. and Ridha, S. (2022) Application of Multiple Regression Technique for Predicting Drilling Rate in Loss Zone. In: UNSPECIFIED.

Kumar, A. and Ridha, S. and Ilyas, S.U. and Dzulkarnain, I. and Pratama, A. (2022) Application of boundary-fitted convolutional neural network to simulate non-Newtonian fluid flow behavior in eccentric annulus. Neural Computing and Applications, 34 (14). pp. 12043-12061. ISSN 09410643

Kumar, A. and Ridha, S. and Ilyas, S.U. and Dzulkarnain, I. and Astra Agus Pramana, D.N. (2022) Correction to: Application of boundary-fitted convolutional neural network to simulate non-Newtonian fluid flow behavior in eccentric annulus (Neural Computing and Applications, (2022), 34, 14, (12043-12061), 10.1007/s00521-022-07092-w). Neural Computing and Applications, 34 (23). p. 21415. ISSN 09410643

Merdeka, M.G. and Ridha, S. and Negash, B.M. and Ilyas, S.U. (2022) Current Overview of Machine Learning Application for Predicting Steam Huff and Puff Injection Production Performance. Lecture Notes in Electrical Engineering, 758. pp. 597-604. ISSN 18761100

Arain, A.H. and Ridha, S. and Suppiah, R.R. and Irawan, S. and Ilyas, S.U. (2022) Developing an efficient ester-based drilling fluid based on Calophyllum Inophyllum oil for eco-friendly drilling of unconventional shale formation. Journal of Petroleum Science and Engineering, 219. ISSN 09204105

Arain, A.H. and Ridha, S. and Ilyas, S.U. and Mohyaldinn, M.E. and Suppiah, R.R. (2022) Evaluating the influence of graphene nanoplatelets on the performance of invert emulsion drilling fluid in high-temperature wells. Journal of Petroleum Exploration and Production Technology, 12 (9). pp. 2467-2491. ISSN 21900558

Soni, A. and Das, P.K. and Yusuf, M. and Ridha, S. (2022) Experimental investigations on the workability of sustainable composite by recycling waste plastics and agro-waste EKSPERIMENTALNA ISTRAŽIVANJA OBRADIVOSTI ODRŽIVOG KOMPOZITA RECIKLAŽOM OTPADNE PLASTIKE I POLJOPRIVREDNOG OTPADA. Materials Protection, 63 (4). pp. 493-501. ISSN 03519465

Yekeen, N. and Khan, J.A. and Ali, M. and Elraies, K.A. and Okunade, O.A. and Ridha, S. and Al-Yaseri, A. (2022) Impact of nanoparticles�surfactant solutions on carbon dioxide and methane wettabilities of organic-rich shale and CO2/brine interfacial tension: Implication for carbon geosequestration. Energy Reports, 8. pp. 15669-15685. ISSN 23524847

Arain, A.H. and Ridha, S. and Mohyaldinn, M.E. and Suppiah, R.R. (2022) Improving the performance of invert emulsion drilling fluid using boron nitride and graphene nanoplatelets for drilling of unconventional high-temperature shale formations. Journal of Molecular Liquids, 363. ISSN 01677322

Ridha, S. and Dzulkarnain, I. and Abdurrahman, M. and Ilyas, S.U. and Bataee, M. (2022) Microstructural properties and compressive strength of fly ash-based geopolymer cement immersed in CO2-saturated brine at elevated temperatures. International Journal of Environmental Science and Technology, 19 (8). pp. 7589-7598. ISSN 17351472

Maqsood, K. and Ali, A. and Ilyas, S.U. and Garg, S. and Danish, M. and Abdulrahman, A. and Rubaiee, S. and Alsaady, M. and Hanbazazah, A.S. and Mahfouz, A.B. and Ridha, S. and Mubashir, M. and Lim, H.R. and Khoo, K.S. and Show, P.L. (2022) Multi-objective optimization of thermophysical properties of multiwalled carbon nanotubes based nanofluids. Chemosphere, 286. ISSN 00456535

Rashid, A. and Siddiqui, N.A. and Bavoh, C.B. and Haque, A.K.M.E. and Usman, M. and Kasim, S.A. and ElGhali, M.A.K. and Ridha, S. (2022) Organic Matter Distribution and Characteristics among Rock Formations in Malaysia: Implications on Hydrocarbon Generation Potential. Applied Sciences (Switzerland), 12 (19). ISSN 20763417

Abdurrahman, M. and Sidek, A. and Agi, A. and Junin, R. and Ridha, S. and Huy, N.X. and Arsad, A. and Gbadamosi, A. and Yakasai, F. and Oseh, J. and Gbonhinbor, J. (2022) A Rapid Method to Predict Minimum Miscibility Pressure Through Interfacial Tension Test and Visual Observation. In: UNSPECIFIED.

Merdeka, M.G. and Ridha, S. and Negash, B.M. and Ilyas, S.U. (2022) Reservoir Performance Prediction in Steam Huff and Puff Injection Using Proxy Modelling. Applied Sciences (Switzerland), 12 (6). ISSN 20763417

Soni, A. and Das, P.K. and Yusuf, M. and Ridha, S. (2022) Tribological behavior of particulates reinforced sustainable composites: Effect of composition, load, and sliding speed. Sustainable Chemistry and Pharmacy, 29. ISSN 23525541

Pratama, E. and Ridha, S. and Negash, B.M. (2022) Well Pair Based Communication Strength Analysis for Water Injection Reservoir Surveillance Using Monte Carlo Simulation Coupled with Machine Learning Approach. In: UNSPECIFIED.

Abdullah, A.H. and Ridha, S. and Mohshim, D.F. and Yusuf, M. and Kamyab, H. and Krishna, S. and Maoinser, M.A. (2022) A comprehensive review of nanoparticles: Effect on water-based drilling fluids and wellbore stability. Chemosphere, 308. ISSN 00456535

Krishna, S. and Ridha, S. and Ilyas, S.U. and Campbell, S. and Bhan, U. and Bataee, M. (2021) Application of deep learning technique to predict downhole pressure differential in eccentric annulus of ultra-deep well. In: UNSPECIFIED.

Otchere, D.A. and Arbi Ganat, T.O. and Gholami, R. and Ridha, S. (2021) Application of supervised machine learning paradigms in the prediction of petroleum reservoir properties: Comparative analysis of ANN and SVM models. Journal of Petroleum Science and Engineering, 200. ISSN 09204105

Sauki, A. and Faizura Megat Khamaruddin, P.N. and Irawan, S. and Kinif, I. and Ridha, S. and Ali, S.A. and Ali, M.A. (2021) Development of a modified Bourgoyne and Young model for predicting drilling rate. Journal of Petroleum Science and Engineering, 205. ISSN 09204105

Krishna, S. and Ridha, S. and Campbell, S. and Ilyas, S.U. and Dzulkarnain, I. and Abdurrahman, M. (2021) Experimental evaluation of surge/swab pressure in varying annular eccentricities using non-Newtonian fluid under Couette-Poiseuille flow for drilling applications. Journal of Petroleum Science and Engineering, 206. ISSN 09204105

Kumar, A. and Ridha, S. and Narahari, M. and Ilyas, S.U. (2021) Physics-guided deep neural network to characterize non-Newtonian fluid flow for optimal use of energy resources. Expert Systems with Applications, 183. ISSN 09574174

Ilyas, S.U. and Ridha, S. and Sardar, S. and Estellé, P. and Kumar, A. and Pendyala, R. (2021) Rheological behavior of stabilized diamond-graphene nanoplatelets hybrid nanosuspensions in mineral oil. Journal of Molecular Liquids, 328. ISSN 01677322

Fauzi, N.A.A.M. and Ganat, T.A.O. and Elraies, K.A. and Ridha, S. and Zainal, S. and Saphanuchart, W. (2020) Agglomeration of fines and sand in the separator. In: UNSPECIFIED.

Krishna, S. and Ridha, S. and Vasant, P. and Ilyas, S.U. and Sophian, A. (2020) Conventional and intelligent models for detection and prediction of fluid loss events during drilling operations: A comprehensive review. Journal of Petroleum Science and Engineering, 195. ISSN 09204105

Krishna, S. and Ridha, S. and Vasant, P. (2020) Development of DNN model for predicting surge pressure gradient during tripping operations. IGI Global, pp. 294-315. ISBN 9781799836469; 9781799836452

Ilyas, S.U. and Ridha, S. and Abdul Kareem, F.A. (2020) Dispersion stability and surface tension of SDS-Stabilized saline nanofluids with graphene nanoplatelets. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 592. ISSN 09277757

Ali, A. and Ilyas, S.U. and Garg, S. and Alsaady, M. and Maqsood, K. and Nasir, R. and Abdulrahman, A. and Zulfiqar, M. and Mahfouz, A.B. and Ahmed, A. and Ridha, S. (2020) Dynamic viscosity of Titania nanotubes dispersions in ethylene glycol/water-based nanofluids: Experimental evaluation and predictions from empirical correlation and artificial neural network. International Communications in Heat and Mass Transfer, 118. ISSN 07351933

Krishna, S. and Ridha, S. and Vasant, P. and Ilyas, S.U. and Irawan, S. and Gholami, R. (2020) Explicit flow velocity modelling of yield power-law fluid in concentric annulus to predict surge and swab pressure gradient for petroleum drilling applications. Journal of Petroleum Science and Engineering, 195. ISSN 09204105

Ridha, S. and Setiawan, R.A. and Pramana, A.A. and Abdurrahman, M. (2020) Impact of wet supercritical CO2 injection on fly ash geopolymer cement under elevated temperatures for well cement applications. Journal of Petroleum Exploration and Production Technology, 10 (2). pp. 243-247. ISSN 21900558

Kumar, A. and Ridha, S. and Ganet, T. and Vasant, P. and Ilyas, S.U. (2020) Machine learning methods for herschel-bulkley fluids in annulus: Pressure drop predictions and algorithm performance evaluation. Applied Sciences (Switzerland), 10 (7). ISSN 20763417

Krishna, S. and Ridha, S. and Vasant, P. and Ilyas, S.U. (2020) New analytical approach for predicting surge/swab pressure gradient using mud clinging effect and frictional pressure losses: For yield power law fluid. In: UNSPECIFIED.

Krishna, S. and Ridha, S. and Vasant, P. (2020) Prediction of Bottom-Hole Pressure Differential During Tripping Operations Using Artificial Neural Networks (ANN). Lecture Notes in Networks and Systems, 118. pp. 379-388. ISSN 23673370

Krishna, S. and Ridha, S. and Vasant, P. and Ilyas, S.U. and Ofei, T.N. (2020) Simplified predictive model for downhole pressure surges during tripping operations using power law drilling fluids. Journal of Energy Resources Technology, Transactions of the ASME, 142 (12). ISSN 01950738

Sauki, A. and Khamaruddin, P.N.F.M. and Irawan, S. and Kinif, I. and Ridha, S. (2020) Statistical relationship of drilled solid concentration on drilling mud rheology. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (1). pp. 122-136. ISSN 22897879

Kumar, A. and Ridha, S. and Ilyas, S.U. (2020) Unsupervised Deep Learning Algorithm to Solve Sub-Surface Dynamics for Petroleum Engineering Applications. In: UNSPECIFIED.

Ganat, T. and Ridha, S. and Hrairi, M. and Arisa, J. and Gholami, R. (2019) Correction to: Experimental investigation of high-viscosity oil�water flow in vertical pipes: flow patterns and pressure gradient (Journal of Petroleum Exploration and Production Technology, (2019), 9, 4, (2911-2918), 10.1007/s13202-019-0677-y). Journal of Petroleum Exploration and Production Technology, 9 (4). p. 2919. ISSN 21900558

Khan, Z.R. and Ganat, T. and Aris, J. and Ridha, S. (2019) Detecting harmful parameters of produced water and drilling waste from smart phone through things speak app: Case study from the mediterranean region. In: UNSPECIFIED.

Ganat, T. and Ridha, S. and Hairir, M. and Arisa, J. and Gholami, R. (2019) Experimental investigation of high-viscosity oil�water flow in vertical pipes: flow patterns and pressure gradient. Journal of Petroleum Exploration and Production Technology, 9 (4). pp. 2911-2918. ISSN 21900558

Ibrahim, A. and Ridha, S. and Amer, A. and Shahari, R. and Ganat, T. (2019) Influence of degree of dispersion of noncovalent functionalized graphene nanoplatelets on rheological behaviour of aqueous drilling fluids. International Journal of Chemical Engineering, 2019. ISSN 1687806X

Momeni, M.S. and Ridha, S. and Hosseini, S.J. and Meyghani, B. and Emamian, S.S. (2018) Bit selection using field drilling data and mathematical investigation. In: UNSPECIFIED.

Pratama, E. and Ismail, M.S. and Ridha, S. (2018) Development of a predictive model for enhanced gas recovery by CO2 huff-n-puff in depleted carbonate gas reservoirs. In: UNSPECIFIED.

Ridha, S. and Abd Hamid, A.I. and Abdul Halim, A.H. and Zamzuri, N.A. (2018) Elasticity and expansion test performance of geopolymer as oil well cement. In: UNSPECIFIED.

Ridha, S. and Ibrahim, A. and Shahari, R. and Fonna, S. (2018) Graphene nanoplatelets as high-performance filtration control material in water-based drilling fluids. In: UNSPECIFIED.

Pratama, E. and Ismail, M.S. and Ridha, S. (2018) Identification of coal seams suitability for carbon dioxide sequestration with enhanced coalbed methane recovery: a case study in South Sumatera Basin, Indonesia. Clean Technologies and Environmental Policy, 20 (3). pp. 581-587. ISSN 1618954X

Thalib, S. and Ikhsan, M. and Fonna, S. and Huzni, S. and Ridha, S. (2018) Identification of corrosion product on medium carbon steel under the exposure of Banda Aceh's atmosphere. In: UNSPECIFIED.

Ridha, S. and Abd Hamid, A.I. and Che Ku Mazuan, C.K.A.H. (2018) Influence of different brine water salinity on mechanical properties of fly ash-based geopolymer cement. International Journal of Structural Integrity, 9 (2). pp. 142-152. ISSN 17579864

Ridha, S. and Abd Hamid, A.I. and Setiawan, R.A. and Shahari, A.R. (2018) Influence of sulfuric and hydrochloric acid on the resistance of geopolymer cement with nano-silica additive for oil well cement application. International Journal of Structural Integrity, 9 (5). pp. 616-624. ISSN 17579864

Ridha, S. and Hamid, A.I.A. and Setiawan, R.A. and Ibrahim, M.A. and Shahari, A.R. (2018) Microstructure Behavior of Fly Ash-Based Geopolymer Cement Exposed to Acidic Environment for Oil Well Cementing. Arabian Journal for Science and Engineering, 43 (11). pp. 6413-6428. ISSN 2193567X

Ridha, S. and Setiawan, R.A. and Hamid, A.I.A. and Shahari, A.R. (2018) The influence of CO2 accelerated carbonation on alkali-activated fly ash cement under elevated temperature and pressure: Einfluss von CO2 beschleunigter Karbonisierung auf alkalisch aktivierten Flugaschezement unter erhöhter Temperatur und erhöhtem Druck. Materialwissenschaft und Werkstofftechnik, 49 (4). pp. 483-488. ISSN 09335137

Momeni, M. and Hosseini, S.J. and Ridha, S. and Laruccia, M.B. and Liu, X. (2018) An optimum drill bit selection technique using artificial neural networks and genetic algorithms to increase the rate of penetration. Journal of Engineering Science and Technology, 13 (2). pp. 361-372. ISSN 18234690

Kanesan, D. and Irawan, S. and Ridha, S. and Chandran, D. and Azhar, N.A.B. (2018) The suitability offly ashbased geopolymer cement for oil well cementing applications: A review. ARPN Journal of Engineering and Applied Sciences, 13 (20). pp. 8297-8316. ISSN 18196608

Bataee, M. and Irawan, S. and Namazi-saleh, F. and Ridha, S. (2017) Development of stress model near the wellbore using an iterative coupling method. International Journal of Geomechanics, 17 (2). ISSN 15323641

Kanesan, D. and Ridha, S. and Rao, P. (2017) Formulation of geopolymer cement using mixture of slag and class f fly ash for oil well cementing. In: UNSPECIFIED.

Ridha, S. and Lubis, L.A. and Setiawan, R.A. and Razif Mohar, J.M.B. (2017) Investigation on mixed oil-cement for wellbore integrity using acoustic velocity. Key Engineering Materials, 740 KE. pp. 190-194. ISSN 10139826

Momeni, M. and Ridha, S. and Hosseiniz, S.J. and Liu, X. and Atashnezhad, A. and Ghaheri, S. (2017) Optimum drill bit selection by using bit images and mathematical investigation. International Journal of Engineering, Transactions B: Applications, 30 (11). pp. 1807-1813. ISSN 1728144X

Ridha, S. and Pratama, E. and Ismail, Mohd.S. (2017) Performance assessment of CO2 sequestration in a horizontal well for enhanced coalbed methane recovery in deep unmineable coal seams. Chemical Engineering Transactions, 56. pp. 589-594. ISSN 22839216

Pratama, E. and Ismail, M.S. and Ridha, S. (2017) Screening criteria of optimum carbon dioxide injection for enhanced coalbed methane recovery and prediction of carbon dioxide storage capacity: A case study in south sumatera basin, Indonesia. Chemical Engineering Transactions, 56. pp. 997-1002. ISSN 22839216

Bataee, M. and Irawan, S. and Ridha, S. and Hematpour, H. and Hamdi, Z. (2017) Wellbore failure during water-alternating-gas injection by use of flow-stress coupling method. SPE Journal, 22 (1). pp. 172-183. ISSN 1086055X

Pratama, E. and Ismail, M.S. and Ridha, S. and Buntoro, A. (2017) An alternative approach for dynamic modeling in a complexly structured and heterogeneous carbonate gas reservoir: a field case study. Arabian Journal of Geosciences, 10 (16). ISSN 18667511

Pratama, E. and Suhaili Ismail, M. and Ridha, S. (2017) An integrated workflow to characterize and evaluate low resistivity pay and its phenomenon in a sandstone reservoir. Journal of Geophysics and Engineering, 14 (3). pp. 513-519. ISSN 17422132

Salehudin, S.S. and Ridha, S. (2016) Coconut residue as biopolymer drag reducer agent in water injection system. International Journal of Applied Engineering Research, 11 (13). pp. 8037-8040. ISSN 09734562

Alias, N.S. and Ridha, S. and Yerikania, U. (2016) Effect of Chemical EOR on Class G Oilwell Cement Integrity under Elevated Conditions. In: UNSPECIFIED.

Bataee, M. and Irawan, S. and Ridha, S. and Hematpour, H. and Hamdi, Z. (2016) Effects of injection pressure on wellbore stress using flow-stress coupling method. In: UNSPECIFIED.

Ridha, S. and Akmalludin, M. and Salehudin, S.S. (2016) Microstructure investigations on nano-geopolymer cement cured under HPHT conditions. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 144-149. ISSN 18196608

Bataee, M. and Irawan, S. and Ridha, S. (2016) Wellbore stability model based on iterative coupling method in water alternating gas injection. Journal of Petroleum Exploration and Production Technology, 6 (4). pp. 755-775. ISSN 21900558

Ridha, S. and Yerikania, U. (2015) New nano-geopolymer cement system improves wellbore integrity upon acidizing job: Experimental findings. In: UNSPECIFIED.

Ridha, S. and Yerikania, U. (2014) Geopolymer cement slurries with enhanced mechanical and physical properties for oilwell cementing. In: UNSPECIFIED.

Wardaya, P.D. and Ridha, S. (2014) Neural network-based segmentation of satellite imagery for estimating house cluster of an urban settlement from Google Earth images. In: UNSPECIFIED.

Ridha, S. and Wardaya, P.D. (2014) Oil spill detection and characterization from satellite image using artificial neural network algorithm. In: UNSPECIFIED.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2014) Prediction Equation for Permeability of Class G Oilwell Cement Under Reservoir Conditions. Arabian Journal for Science and Engineering, 39 (6). pp. 5219-5228. ISSN 2193567X

Wardaya, P.D. and Major, R.P. and Sum, C.W. and Ridha, S. (2014) Seismic modeling for investigating the influence of pore geometry to the seismic velocity in carbonate rock. In: UNSPECIFIED.

Wardaya, P.D. and Major, R.P. and Sum, C.W. and Ridha, S. (2014) Seismic modelling for investigating the influence of pore geometry to the seismic velocity in carbonate rock. First Break, 32 (6). pp. 155-156. ISSN 02635046

Wardaya, P.D. and Noh, K.A.B.M. and Yusoff, W.I.B.W. and Ridha, S. and Nurhandoko, B.E.B. (2014) The thin section rock physics: Modeling and measurement of seismic wave velocity on the slice of carbonates. In: UNSPECIFIED.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2013) Strength prediction of Class G oilwell cement during early ages by electrical conductivity. Journal of Petroleum Exploration and Production Technology, 3 (4). pp. 303-311. ISSN 21900558

Ridha, S. and Irawan, S. and Ariwahjoedi, B. and Azizli, K.A.B.M. and Nuruddin, M.F. and Khairy, H. (2012) Modified Johnson model for permeability estimation in oil well cement during early hydration. Research Journal of Applied Sciences, Engineering and Technology, 4 (17). pp. 2920-2925. ISSN 20407459

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2011) Conductivity dispersion characteristic of cement slurry during early hydration. In: UNSPECIFIED.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2011) Microstructure parameter estimation in permeability calculation of well cement during early hydration by a simple particle expansion model. In: UNSPECIFIED.

Ridha, S. and Irawan, S. and Ariwahjoedi, B. (2011) Prediction of interface conductivity of cement slurry during early hydration considering the effect of curing temperature and pressure. In: UNSPECIFIED.