Article

Raza, A. and Ahmad, F. and Badri, T.M. and Raza, M.R. and Malik, K. and Ali, S. (2023) Selection of Materials Based on Thermo-Mechanical Properties of Thermal Barrier Coatings and Their Failures�A Review. Lecture Notes in Mechanical Engineering. pp. 255-264.

Rehman, S. and Ranjha, N.M. and Shoukat, H. and Madni, A. and Ahmad, F. and Raza, M.R. and Jameel, Q.A. and Majeed, A. and Ramzan, N. (2022) Correction to: Fabrication, Evaluation, In Vivo Pharmacokinetic and Toxicological Analysis of pH-Sensitive Eudragit S-100-Coated Hydrogel Beads: a Promising Strategy for Colon Targeting (AAPS PharmSciTech, (2021), 22, 6, (209), 10.1208/s12249-021-02082-y). AAPS PharmSciTech, 23 (4). ISSN 15309932

Ali, S. and Ahmad, F. and Shirazi, M.I. and Malik, K. and Raza, M.R. and Memon, I.R. (2022) Flow induced fiber orientation in short carbon fiber reinforced copper matrix composites. Materials Today Communications, 33. ISSN 23524928

Raza, A. and Ahmad, F. and Badri, T.M. and Raza, M.R. and Malik, K. (2022) An Influence of Oxygen Flow Rate and Spray Distance on the Porosity of HVOF Coating and Its Effects on Corrosion�A Review. Materials, 15 (18). ISSN 19961944

Rehman, S. and Madni, A. and Jameel, Q.A. and Usman, F. and Raza, M.R. and Ahmad, F. and Shoukat, H. and Aali, H. and Shafiq, A. (2022) Natural Polymer-Based Graphene Oxide Bio-nanocomposite Hydrogel Beads: Superstructures with Advanced Potentials for Drug Delivery. AAPS PharmSciTech, 23 (8). ISSN 15309932

Ullah, S. and Ahmad, F. and Al-Sehemi, A.G. and Assiri, M.A. and Raza, M.R. and Irfan, A. (2021) Effect of expandable graphite and ammonium polyphosphate on the thermal degradation and weathering of intumescent fire-retardant coating. Journal of Applied Polymer Science, 138 (17). ISSN 00218995

Ullah, S. and Ahmad, F. and Al-Sehemi, A.G. and Raza, M.R. and Assiri, M.A. and Irfan, A. and Oñate, E. and Yeoh, G.H. (2021) Effects of expandable graphite on char morphology and pyrolysis of epoxy based intumescent fire-retardant coating. Journal of Applied Polymer Science, 138 (41). ISSN 00218995

Rehman, S. and Ranjha, N.M. and Shoukat, H. and Madni, A. and Ahmad, F. and Raza, M.R. and Jameel, Q.A. and Majeed, A. and Ramzan, N. (2021) Fabrication, Evaluation, In Vivo Pharmacokinetic and Toxicological Analysis of pH-Sensitive Eudragit S-100-Coated Hydrogel Beads: a Promising Strategy for Colon Targeting. AAPS PharmSciTech, 22 (6). ISSN 15309932

Madni, A. and Rehman, S. and Sultan, H. and Khan, M.M. and Ahmad, F. and Raza, M.R. and Rai, N. and Parveen, F. (2021) Mechanistic Approaches of Internalization, Subcellular Trafficking, and Cytotoxicity of Nanoparticles for Targeting the Small Intestine. AAPS PharmSciTech, 22 (1). ISSN 15309932

Ali, S. and Ahmad, F. and Yusoff, P.S.M.M. and Muhamad, N. and Oñate, E. and Raza, M.R. and Malik, K. (2021) A review of graphene reinforced Cu matrix composites for thermal management of smart electronics. Composites Part A: Applied Science and Manufacturing, 144. ISSN 1359835X

Ullah, S. and Assiri, M.A. and Al-Sehemi, A.G. and Bustam, M.A. and Sagir, M. and Abdulkareem, F.A. and Raza, M.R. and Ayoub, M. and Irfan, A. (2020) Characteristically Insights, Artificial Neural Network (ANN), Equilibrium, and Kinetic Studies of Pb(II) Ion Adsorption on Rice Husks Treated with Nitric Acid. International Journal of Environmental Research, 14 (1). pp. 43-60. ISSN 17356865

Ahmad, F. and Zulkurnain, E.S.B. and Ullah, S. and Al-Sehemi, A.G. and Raza, M.R. (2020) Improved fire resistance of boron nitride/epoxy intumescent coating upon minor addition of nano-alumina. Materials Chemistry and Physics, 256. ISSN 02540584

Naseer, A. and Ahmad, F. and Aslam, M. and Guan, B.H. and Harun, W.S.W. and Muhamad, N. and Raza, M.R. and German, R.M. (2019) A review of processing techniques for graphene-reinforced metal matrix composites. Materials and Manufacturing Processes, 34 (9). pp. 957-985. ISSN 10426914

Nazir, M.S. and Ajab, H. and Raza, M.R. and Abdullah, M.A. (2018) Surface modification of cellulose fibers from oil palm empty fruit bunches for heavy metal ion sorption and diesel desulphurization. Desalination and Water Treatment, 107. pp. 241-256. ISSN 19443994

Raza, M.R. and Ahmad, F. and Muhamad, N. and Sulong, A.B. and Omar, M.A. and Akhtar, M.N. and Aslam, M. and Sherazi, I. (2017) Effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 L - Stainless steel. Sains Malaysiana, 46 (2). pp. 285-293. ISSN 01266039

Ullah, S. and Ahmad, F. and Shariff, A.M. and Raza, M.R. and Masset, P.J. (2017) The role of multi-wall carbon nanotubes in char strength of epoxy based intumescent fire retardant coating. Journal of Analytical and Applied Pyrolysis, 124. pp. 149-160. ISSN 01652370

Abdullah, M.A. and Nazir, M.S. and Raza, M.R. and Wahjoedi, B.A. and Yussof, A.W. (2016) Autoclave and ultra-sonication treatments of oil palm empty fruit bunch fibers for cellulose extraction and its polypropylene composite properties. Journal of Cleaner Production, 126. pp. 686-697. ISSN 09596526

Raza, M.R. and Ahmad, F. and Muhamad, N. and Sulong, A.B. and Omar, M.A. and Akhtar, M.N. and Aslam, M. (2016) Effects of solid loading and cooling rate on the mechanical properties and corrosion behavior of powder injection molded 316 L stainless steel. Powder Technology, 289. pp. 135-142. ISSN 00325910

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Abdul Khalil, H.P.S. and Raza, M.R. (2016) Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks. Advances in Materials Science and Engineering, 2016. ISSN 16878434

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2015) Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites. International Journal of Powder Metallurgy, 51 (1). pp. 57-66. ISSN 08887462

Ahmad, F. and Aslam, M. and Raza, M.R. and Muhsan, A.S. and Shirazi, M.I. (2014) Experimental investigation on thermal conduction of carbon nanotubes reinforced copper matrix composites. Applied Mechanics and Materials, 564. pp. 455-460. ISSN 16609336

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Megat Yusoff, P.S.M. and Raza, M.R. (2014) Homogeneous distribution of carbon nanotubes in copper matrix nanocomposites fabricated via combined technique. Nanoscience and Nanotechnology Letters, 6 (10). pp. 865-874. ISSN 19414900

Raza, M.R. and Ahmad, F. and Omar, M.A. and Muhsan, A.S. (2013) Development of defects free stainless steel parts using powder injection molding. Asian Journal of Scientific Research, 6 (2). pp. 307-314. ISSN 19921454

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2013) Fabrication and microstructural analysis of CNTs reinforced copper matrix nanocomposites via MIM technique. Applied Mechanics and Materials, 459. pp. 11-17. ISSN 16609336

Ahmad, F. and Raza, M.R. and Mushan, A.S. and Omer, M.A. (2013) Preparation and fiber fracture of metal matrix composite feed-stock for powder injection molding. International Journal of Powder Metallurgy, 49 (2). pp. 33-38. ISSN 08887462

Raza, M.R. and Ahmad, F. and Omar, M.A. and German, R.M. and Muhsan, A.S. (2013) Role of debinding to control mechanical properties of powder injection molded 316L stainless steel. Advanced Materials Research, 699. pp. 875-882. ISSN 10226680

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Yusoff, P.S.M.B.T.M. and Raza, M.R. (2012) Carbon nanotubes reinforced copper matrix nanocomposites via metal injection molding technique. Journal of Applied Sciences, 12 (23). pp. 2397-2403. ISSN 18125654

Raza, M.R. and Ahmad, F. and Omar, M.A. and German, R.M. and Muhsan, A.S. (2012) Defect analysis of 316LSS during the powder injection moulding process. Defect and Diffusion Forum, 329. pp. 35-43. ISSN 10120386

Raza, M.R. and Ahmad, F. and Omar, M.A. and German, R.M. (2012) Effects of cooling rate on mechanical properties and corrosion resistance of vacuum sintered powder injection molded 316L stainless steel. Journal of Materials Processing Technology, 212 (1). pp. 164-170. ISSN 09240136

Raza, M.R. and Ahmad, F. and Mamat, O. and Omar, M.A. and German, R.M. and Muhsan, A.S. (2012) Effects of sintering temperature and cooling rate on mechanical properties of powder injection molded 316L stainless steel. Solid State Phenomena, 185. pp. 102-105. ISSN 10120394

Ahmad, F. and Muhsan, A.S. and Raza, M.R. (2012) Rheological behavior of carbon nanotubes/ copper feedstocks for metal injection molding. Advanced Materials Research, 403-40. pp. 5335-5340. ISSN 10226680

Raza, M.R. and Ahmad, F. and Omar, M.A. and German, R.M. (2011) Binder removal from powder injection molded 316L stainless steel. Journal of Applied Sciences, 11 (11). pp. 2042-2047. ISSN 18125654

Raza, M.R. and Ahmad, F. and Ikram, N. and Ahmad, R. and Salam, A. (2011) Development and strengthening of 2219 aluminium alloy by mechanical working and heat treatment. Journal of Applied Sciences, 11 (10). pp. 1857-1861. ISSN 18125654

Ahmad, F. and Raza, M.R. (2011) Quantitative analysis of fiber fracture in powder injection molded metal composites. Defect and Diffusion Forum, 319-32. pp. 65-76. ISSN 10120386

Ahmad, F. and Raza, M.R. and Rani, A.M.A. and Jason Lo, S.H. (2011) Wear properties of alumina particles reinforced aluminium alloy matrix composite. Journal of Applied Sciences, 11 (9). pp. 1673-1677. ISSN 18125654

Conference or Workshop Item

Shirazi, I. and Ahmad, F. and Raza, M.R. and Muhsan, A.S. and Aslam, M. (2015) Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding. In: UNSPECIFIED.

Aslam, M. and Ahmad, F. and Bintimegat Yusoff, P.S.M. and Muhamad, N. and Raza, M.R. and Irfan Shirazi, M. (2014) Effects of admixed titanium on densification of 316L stainless steel powder during sintering. In: UNSPECIFIED.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Yusoff, P.S.M.M. and Raza, M.R. and Afrooz, I.E. (2014) Experimental preparation and numerical simulation of high thermal conductive Cu/CNTs Nanocomposites. In: UNSPECIFIED.