Article

Rao, T.V.V.L.N. and Akmar Mokhtar, A. and Muhammad, M. and Haji Ya, H. (2023) Analysis of Optimally Tuned Active Dynamic Vibration Absorber. Lecture Notes in Mechanical Engineering. pp. 455-462.

Al-Amin, M. and Abdul-Rani, A.M. and Rao, T.V.V.L.N. and Danish, M. and Rubaiee, S. and Mahfouz, A.B. and Parameswari, R.P. and Wani, M.F. (2022) Investigation of machining and modified surface features of 316L steel through novel hybrid of HA/CNT added-EDM process. Materials Chemistry and Physics, 276. ISSN 02540584

Al-Amin, M. and Abdul-Rani, A.M. and Ahmed, R. and Rao, T.V.V.L.N. (2021) Multiple-objective optimization of hydroxyapatite-added EDM technique for processing of 316L-steel. Materials and Manufacturing Processes, 36 (10). pp. 1134-1145. ISSN 10426914

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2021) Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering. pp. 217-225. ISSN 21954356

Al Kaisy, G.M.J. and Mutalib, M.I.A. and Rao, T.V.V.L.N. and Senatore, A. (2021) Tribological performance of low viscosity halogen-free ammonium based protic ionic liquids with carboxylate anions as neat lubricants. Tribology International, 160. ISSN 0301679X

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Thompson, H.M. and Abdu Aliyu, A.A. and Hastuty, S. and Zohura, F.T. and Bryant, M.G. and Rubaiee, S. and Rao, T.V.V.L.N. (2020) Assessment of PM-EDM cycle factors influence on machining responses and surface properties of biomaterials: A comprehensive review. Precision Engineering, 66. pp. 531-549. ISSN 01416359

Ali, S. and Abdul Rani, A.M. and Baig, Z. and Ahmed, S.W. and Hussain, G. and Subramaniam, K. and Hastuty, S. and Rao, T.V.V.L.N. (2020) Biocompatibility and corrosion resistance of metallic biomaterials. Corrosion Reviews, 38 (5). pp. 381-402. ISSN 03346005

Krishnan, S. and Krishna, A. and Nordin, A. and Amirtham, V. and Rani, A.M.A. and Rao, T.V.V.L.N. (2020) Design and Fabrication of a Parallel Mechanism for Foot/Ankle Rehabilitation Therapy. Lecture Notes in Mechanical Engineering. pp. 133-141. ISSN 21954356

Khan, R. and Ya, H.H. and Pao, W. and Rao, T.V.V.L.N. and Alam, A. and Azeem, M. (2020) Investigation of maximum erosion zone in the horizontal 90° elbow. Lecture Notes in Mechanical Engineering. pp. 223-230. ISSN 21954356

Rao, T.V.V.L.N. and A Rani, A.M. and Mohamed, N.M. and Ya, H.H. and Awang, M. and M Hashim, F. (2020) Static and stability analysis of partial slip texture multi-lobe journal bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234 (4). pp. 567-587. ISSN 13506501

Nurshafiq Ramli, M. and Rani, A.M.A. and Sallih, N. and Aliyu, A.A.A. and Rao, T.V.V.L.N. (2020) Vibration Analysis Methods for Misalignment and Tolerance Problems in Machine Systems: A Review. Lecture Notes in Mechanical Engineering. pp. 57-66. ISSN 21954356

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2019) Analysis of magnetohydrodynamic partial slip laser bump texture slider and journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233 (12). pp. 1921-1938. ISSN 13506501

Aliyu, A.A. and Abdul-Rani, A.M. and Rao, T.V.V.L.N. and Axinte, E. and Hastuty, S. and Parameswari, R.P. and Subramaniam, J.R. and Thyagarajan, S.P. (2019) Characterization, adhesion strength and in-vitro cytotoxicity investigation of hydroxyapatite coating synthesized on Zr-based BMG by electro discharge process. Surface and Coatings Technology, 370. pp. 213-226. ISSN 02578972

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.�A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541. ISSN 21954356

Rao, T.V.V.L.N. and Rani, A.M.A. and Manivasagam, G. (2019) Squeeze Film Bearing Characteristics for Synovial Joint Applications. Materials Horizons: From Nature to Nanomaterials. pp. 55-72. ISSN 25245384

Aliyu, A.�A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Rao, T.V.V.L.N. and Axinte, E. and Ali, S. (2019) Synthesis and characterization of bioceramic oxide coating on Zr-Ti-Cu-Ni-Be BMG by electro discharge process. Lecture Notes in Mechanical Engineering. pp. 518-531. ISSN 21954356

Aliyu, A.A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Rao, T.V.V.L.N. and Selvamurugan, N. and Roy, S. (2018) Hydroxyapatite mixed-electro discharge formation of bioceramic Lakargiite (CaZrO3) on Zr�Cu�Ni�Ti�Be for orthopedic application. Materials and Manufacturing Processes, 33 (16). pp. 1734-1744. ISSN 10426914

Faez, K.M. and Hamdavi, S. and Rao, T.V.V.L.N. and Ya, H.H. and Mohamed, N.M. (2018) Performance analysis of grooved hydrodynamic journal bearing with multi- depth textured surface. International Journal of Vehicle Structures and Systems, 10 (2). pp. 142-145. ISSN 09753060

Abdul-Rani, A.M. and Krishnan, S. and Nagarajan, T. and Rao, T.V.V.L.N. and Ramiah, R. and Ambaraj, W. (2017) Early mobilization using heat treated shape memory alloy (sma) for rehabilitation phases. Key Engineering Materials, 724 KE. pp. 112-116. ISSN 10139826

Abdul-Rani, A.M. and Krishnan, S. and Nagarajan, T. and Rao, T.V.V.L.N. (2017) Inverse kinematics-stewart platform actuated by shape memory alloy for immobilization of ankle-foot rehabilitation. Key Engineering Materials, 724 KE. pp. 105-111. ISSN 10139826

Hamdavi, S. and Rao, T.V.V.L.N. and Muhammad, M. and Faez, K.M. and Ya, H.H. (2017) Linear stability analysis of short journal bearing with an axial groove: Lineare Stabilitätsanalyse von Kurzgleitlagern mit einer axialen Nut. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 210-217. ISSN 09335137

Hidayat, M.I.P. and Ariwahjoedi, B. and Parman, S. and Rao, T.V.V.L.N. (2017) Meshless Local B-Spline Collocation Method for Two-Dimensional Heat Conduction Problems With Nonhomogenous and Time-Dependent Heat Sources. Journal of Heat Transfer, 139 (7). ISSN 00221481

Al Kaisy, G.M.J. and Abdul Mutalib, M.I. and Rao, T.V.V.L.N. (2017) Novel halogen free hydrophobic trioctylammonium-based protic ionic liquids with carboxylate anions: Synthesis, characterization, and thermophysical properties. Journal of Molecular Liquids, 242. pp. 349-356. ISSN 01677322

Al Kaisy, G.M.J. and Mutalib, M.I.A. and Leveque, J.M. and Rao, T.V.V.L.N. (2017) Novel low viscosity ammonium-based ionic liquids with carboxylate anions: Synthesis, characterization, and thermophysical properties. Journal of Molecular Liquids, 230. pp. 565-573. ISSN 01677322

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Mohamed, N.M. (2017) Performance analysis of long grooved journal bearing with slip, no-slip, and slip/no-slip textured surface configurations. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5794-5798. ISSN 18196608

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2017) Stability evaluation of three-layered journal bearing with slip/partial slip. Industrial Lubrication and Tribology, 69 (3). pp. 334-341. ISSN 00368792

Rao, T.V.V.L.N. and Rani, A.M.A. and Sufian, S. and Mohamed, N.M. (2017) Thin Film Hydrodynamic Bearing Analysis Using Nanoparticle Additive Lubricants. Topics in Mining, Metallurgy and Materials Engineering. pp. 149-173. ISSN 23643293

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2016) Analysis of Micropolar and Power Law Fluid�Lubricated Slider and Journal Bearing with Partial Slip�Partial Slip Texture Configuration. Tribology Transactions, 59 (5). pp. 896-910. ISSN 10402004

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. and Rao, T.V.V.L.N. and Pedapati, S.R. (2016) Application of nano aluminum in modified EDM: pmedm. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12117-12121. ISSN 18196608

Omer, M.A. and Rao, T.V.V.L.N. (2016) Effect of additive volume fraction on a fluid film pressure and load of hydrodynamic journal bearing using ferromagnetic fluid. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4203-4207. ISSN 18196608

Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. (2016) Effect of surface texturing on hydrodynamic performance of journal bearings. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 172-176. ISSN 18196608

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2016) Load capacity coefficient evaluation of three-layered journal bearing with slip. Jurnal Teknologi, 78 (6-10). pp. 39-43. ISSN 01279696

Prasanth Kumar, B. and Rao, T.V.V.L.N. and Baharom, M. (2016) Microstructure based finite element analysis for deformation behavior of magnesium based composites. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12967-12972. ISSN 18196608

Rao, T.V.V.L.N. and Mokhtar, A.A. and Muhammad, M. and Hussain, P. (2016) Optimally tuned active damped dynamic vibration absorber. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13380-13383. ISSN 18196608

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Nagarajan, T. and Hashim, F.M. (2016) Stability analysis of double porous and surface porous layer journal bearing. Tribology - Materials, Surfaces and Interfaces, 10 (1). pp. 19-25. ISSN 17515831

Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Faez, K.M. (2016) An analytical approach to investigate the effect of grooved surface on short journal bearing's performance. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12045-12049. ISSN 18196608

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. (2016) An analytical investigation of the grooved journal bearing's performance with slip/no-slip texture bearing. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12990-12993. ISSN 18196608

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of couple stress fluid lubricated partially textured slip slider and journal bearing using narrow groove theory. Tribology International, 69. pp. 1-9. ISSN 0301679X

Rao, T.V.V.L.N. and Sufian, S. and Mohamed, N.M. (2014) Analysis of electric double layer on thin film lubrication with partial slip. Advanced Materials Research, 925. pp. 538-542. ISSN 10226680

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered film journal bearing with partial slip surface. Advanced Materials Research, 903. pp. 215-220. ISSN 10226680

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. and Fadhil, M. (2014) Evaluation of spur gear pair on tooth root bending stress in yawing misalignment contactcondition. Advanced Materials Research, 980. pp. 97-101. ISSN 10226680

Abdul-Rani, A.M. and Ismail, M.Z. and Zaky, M.A. and Noor, M.H.M. and Zhun, Y.Y. and Ganesan, K. and Rao, T.V.V.L.N. and Kamal, S. and Ginta, T.L. (2014) Improving rate of penetration for PDC drill bit using reverse engineering. Applied Mechanics and Materials, 607. pp. 153-160. ISSN 16609336

Hidayat, M.I.P. and Ariwahjoedi, B. and Setyamartana, P. and Megat Yusoff, P.S.M. and Rao, T.V.V.L.N. (2014) Meshless local B-spline basis functions-FD method and its application for heat conduction problem with spatially varying heat generation. Applied Mechanics and Materials, 465-46. pp. 490-495. ISSN 16609336

Ahmad, M.A.R. and Nasiruddin, Z.R. and Rao, T.V.V.L.N. and Altaf, K. (2014) Overcoming limitation in DFM using layer manufacturing. Applied Mechanics and Materials, 660. pp. 94-98. ISSN 16609336

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Analysis of Journal Bearing with Double-Layer Porous Lubricant Film: Influence of Surface Porous Layer Configuration. Tribology Transactions, 56 (5). pp. 841-847. ISSN 10402004

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Analysis of journal bearing considering the effects of surface layer and couple stress fluids. Asian Journal of Scientific Research, 6 (2). pp. 315-322. ISSN 19921454

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Load capacity of partially textured journal bearing with trapezoidal recess. Applied Mechanics and Materials, 315. pp. 830-834. ISSN 16609336

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. (2013) A numerical FEM solution of gear root stress in offset axial mesh misalignment. Applied Mechanics and Materials, 393. pp. 375-380. ISSN 16609336

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Analysis of slider and journal bearing using partially textured slip surface. Tribology International, 56. pp. 121-128. ISSN 0301679X

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Analysis of two-layered porous journal bearing using the Brinkman model. Journal of Applied Sciences, 12 (24). pp. 2610-2615. ISSN 18125654

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Partially textured slider and journal bearing analysis. Jurnal Teknologi (Sciences and Engineering), 58 (SUPPL.). pp. 77-84. ISSN 01279696

Rao, T.V.V.L.N. (2012) Stability characteristics of misaligned journal bearing. Advances in Vibration Engineering, 11 (4). pp. 361-370. ISSN 09725768

Rao, T.V.V.L.N. (2012) Stabilization of journal bearing using two-layered film lubrication. Journal of Tribology, 134 (1). ISSN 07424787

Lias, M.R. and Rao, T.V.V.L.N. and Awang, M. and Khan, M.A. (2012) The stress distribution of gear tooth due to axial misalignment condition. Journal of Applied Sciences, 12 (23). pp. 2404-2410. ISSN 18125654

Conference or Workshop Item

Adzis, A.H.A. and Abdul-Rani, A.M. and Yi, K.Y. and Maulianda, B.T. and Rao, T.V.V.L.N. (2018) Effect of back rake angle and shape on wear rate of PDC cutter in hard formation. In: UNSPECIFIED.

Abdul-Rani, A.M. and Aliyu, A.A.A. and Hastuty, S. and Ginta, T.L. and Rao, T.V.V.L.N. and Ali, S. (2018) Enhancing surface quality of Zr-Cu-Ni-Ti-Be through hydroxyapatite mixed EDM for potential orthopedic application. In: UNSPECIFIED.

Azam, F.I. and Abdul Rani, A.M. and Altaf, K. and Rao, T.V.V.L.N. and Zaharin, H.A. (2018) An In-Depth Review on Direct Additive Manufacturing of Metals. In: UNSPECIFIED.

Razak, M.A. and Abdul-Rani, A.M. and Rao, T.V.V.L.N. and Pedapati, S.R. and Kamal, S. (2016) Electrical Discharge Machining on Biodegradable AZ31 Magnesium Alloy Using Taguchi Method. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Sufian, S. and Mohamed, N.M. (2015) Analysis of CNT additives in porous layered thin film lubrication with electric double layer. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered journal bearing lubricated with ferrofluid. In: UNSPECIFIED.

Lias, M.R. and Awang, M. and Rao, T.V.V.L.N. and Ahmad, M.F.A. and Patil, S. (2014) Evaluation of spur gear pair on tooth root bending stress in radial misalignment contact condition. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Awang, M. and Lias, M.R. and Rani, A.M.A. (2014) Nonlinear analysis of spur gear pair with time-varying mesh stiffness. In: UNSPECIFIED.

Omer, M.A. and Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Pressure distribution in hydrodynamic journal bearing with lubricants additives. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Analysis of couple stress fluid lubricated journal bearing with partial slip surface. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Sufian, S. and Mohamed, N.M. (2013) Analysis of nanoparticle additive couple stress fluids in three-layered journal bearing. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Load capacity of partially textured slip parallel slider and concentric journal bearing using narrow groove theory. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Analysis of partially textured slider and journal bearing. In: UNSPECIFIED.

Book

Katiyar, J.K. and Rani, A.M.A. and Sulaiman, M.H. and Barman, U. and Masset, P.J. and Rao, T.V.V.L.N. (2023) Recent Advances of Tribology in Sustainable Manufacturing. CRC Press, pp. 1-28. ISBN 9781003808213; 9781032426310

Katiyar, J.K. and Rao, T.V.V.L.N. and Rani, A.M.A. and Sulaiman, M.H. and Paulo Davim, J. (2023) Tribology in Sustainable Manufacturing. CRC Press, pp. 1-281. ISBN 9781003808213; 9781032426310

Rao, T.V.V.L.N. and Abdul Rani, A.M. and Awang, M. and Baharom, M. and Uemur, Y. (2021) Biolubricants with Additives in Malaysia for Tribological Applications. Springer International Publishing, pp. 1541-1554. ISBN 9783030362683; 9783030362676