Article

Subramanim, K. and Sriraman and Amirtham, V. and Rani, A.M.A. and Ali, S. and Perumal, T. (2023) Review of Current Development of Knee Rehabilitation Device Using Series Elastic Actuator (SEA). Lecture Notes in Mechanical Engineering. pp. 965-980. ISSN 21954356

Shukor, J.�A. and Razak, M.A.-H.A. and Hassan, A. and Jamian, R. and Rani, A.M.A. (2022) Determining the Alternative Type of Wood for Class a Fire Crib Test According to UL 2166 Standards. Advanced Structured Materials, 162. pp. 19-27. ISSN 18698433

Krishnan, S. and Rani, A.M.A. and Kurappa, L.G. and Paramasivam, S. (2022) Fabrication of Parallel Mechanism Actuated by Pneumatic Artificial Muscle for Rehabilitation Therapy. Lecture Notes in Electrical Engineering, 758. pp. 355-363. ISSN 18761100

Ali, S. and Irfan, M. and Niazi, U.M. and Rani, A.M.A. and Rashedi, A. and Rahman, S. and Khan, M.K.A. and Alsaiari, M.A. and Legutko, S. and Petrů, J. and Trefil, A. (2022) Microstructure and Mechanical Properties of Modified 316L Stainless Steel Alloy for Biomedical Applications Using Powder Metallurgy. Materials, 15 (8). ISSN 19961944

Azam, F.I. and Rani, A.M.A. and Razak, M.A.�H.A. and Ali, S. and Aliyu, A.�A. (2021) Additive Manufacturing Processes, Challenges and Applications: A Review. Advanced Structured Materials, 148. pp. 93-111. ISSN 18698433

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2021) Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering. pp. 217-225. ISSN 21954356

Ali, S. and Irfan, M. and Niazi, U.M. and Rani, A.M.A. and Shah, I. and Legutko, S. and Rahman, S. and Jalalah, M. and Alsaiari, M.A. and Glowacz, A. and Alkahtani, F.S. (2021) Synthesis, surface nitriding and characterization of ti-nb modified 316l stainless steel alloy using powder metallurgy. Materials, 14 (12). ISSN 19961944

Krishnan, S. and Krishna, A. and Nordin, A. and Amirtham, V. and Rani, A.M.A. and Rao, T.V.V.L.N. (2020) Design and Fabrication of a Parallel Mechanism for Foot/Ankle Rehabilitation Therapy. Lecture Notes in Mechanical Engineering. pp. 133-141. ISSN 21954356

Ayop, A.Z. and Bahruddin, A.Z. and Maulianda, B. and Prakasan, A. and Dovletov, S. and Atdayev, E. and Rani, A.M.A. and Elraies, K.A. and Ganat, T.A.-A. and Barati, R. and Wee, S.C. (2020) Numerical modeling on drilling fluid and cutter design effect on drilling bit cutter thermal wear and breakdown. Journal of Petroleum Exploration and Production Technology, 10 (3). pp. 959-968. ISSN 21900558

Ali, S. and Rani, A.M.A. and Mufti, R.A. and Ahmed, S.W. and Baig, Z. and Hastuty, S. and Razak, M.A.A. and Aliyu, A.A.A. (2020) Optimization of sintering parameters of 316L stainless steel for in-situ nitrogen absorption and surface nitriding using response surface methodology. Processes, 8 (3). ISSN 22279717

Fua-Nizan, R. and Rani, A.M.A. and Din, M.Y. and Chopra, S. (2020) Preliminary Study of Stress Distribution on Modified Femoral Component of Knee Implant at Maximum Flexion Angle. Lecture Notes in Mechanical Engineering. pp. 17-22. ISSN 21954356

Nurshafiq Ramli, M. and Rani, A.M.A. and Sallih, N. and Aliyu, A.A.A. and Rao, T.V.V.L.N. (2020) Vibration Analysis Methods for Misalignment and Tolerance Problems in Machine Systems: A Review. Lecture Notes in Mechanical Engineering. pp. 57-66. ISSN 21954356

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2019) Analysis of magnetohydrodynamic partial slip laser bump texture slider and journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233 (12). pp. 1921-1938. ISSN 13506501

Rao, T.V.V.L.N. and Rani, A.M.A. and Manivasagam, G. (2019) Squeeze Film Bearing Characteristics for Synovial Joint Applications. Materials Horizons: From Nature to Nanomaterials. pp. 55-72. ISSN 25245384

Tariq, A. and Altaf, K. and Rani, A.M.A. and Baharom, M. and Aziz, A.R.A. (2019) Study of heat transfer attributes of custom fins for Crank-Rocker engine block using ANSYS. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (2). pp. 235-243. ISSN 22897879

Ali, S. and Rani, A.M.A. and Mufti, R.A. and Hastuty, S. and Hussain, M. and Shehzad, N. and Baig, Z. and Aliyu, A.A.A. (2019) An efficient approach for nitrogen diffusion and surface nitriding of boron-titanium modified stainless steel alloy for biomedical applications. Metals, 9 (7). ISSN 20754701

Ali, S. and Rani, A.M.A. and Mufti, R.A. and Azam, F.I. and Hastuty, S. and Baig, Z. and Hussain, M. and Shehzad, N. (2019) The influence of nitrogen absorption on microstructure, properties and cytotoxicity assessment of 316L stainless steel alloy reinforced with boron and niobium. Processes, 7 (8). pp. 1-12. ISSN 22279717

Zaharin, H.A. and Rani, A.M.A. and Azam, F.I. and Ginta, T.L. and Sallih, N. and Ahmad, A. and Yunus, N.A. and Zulkifli, T.Z.A. (2018) Effect of unit cell type and pore size on porosity and mechanical behavior of additively manufactured Ti6Al4V scaffolds. Materials, 11 (12). ISSN 19961944

Azam, F.I. and Rani, A.M.A. and Altaf, K. and Zaharin, H.A. (2018) Experimental and numerical investigation of six-bar linkage application to bellow globe valve for compact design. Applied Sciences (Switzerland), 8 (10). ISSN 20763417

Altaf, K. and Qayyum, J.A. and Rani, A.M.A. and Ahmad, F. and Megat-Yusoff, P.S.M. and Baharom, M. and Aziz, A.R.A. and Jahanzaib, M. and German, R.M. (2018) Performance analysis of enhanced 3D printed polymer molds for metal injection molding process. Metals, 8 (6). ISSN 20754701

Azam, F.I. and Rani, A.M.A. and Altaf, K. and Zaharin, H.A. (2017) Additive manufacturing design of globe valve for optimized flow. Transactions of the Canadian Society for Mechanical Engineering, 41 (5). pp. 717-723. ISSN 03158977

Aliyu, A.A.A. and Rohani, J.M. and Rani, A.M.A. and Musa, H. (2017) Optimization of electrical discharge machining parameters of SiSiC through response surface methodology. Jurnal Teknologi, 79 (1). pp. 119-129. ISSN 01279696

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2017) Stability evaluation of three-layered journal bearing with slip/partial slip. Industrial Lubrication and Tribology, 69 (3). pp. 334-341. ISSN 00368792

Danish, M. and Ginta, T.L. and Habib, K. and Carou, D. and Rani, A.M.A. and Saha, B.B. (2017) Thermal analysis during turning of AZ31 magnesium alloy under dry and cryogenic conditions. International Journal of Advanced Manufacturing Technology, 91 (5-8). pp. 2855-2868. ISSN 02683768

Rao, T.V.V.L.N. and Rani, A.M.A. and Sufian, S. and Mohamed, N.M. (2017) Thin Film Hydrodynamic Bearing Analysis Using Nanoparticle Additive Lubricants. Topics in Mining, Metallurgy and Materials Engineering. pp. 149-173. ISSN 23643293

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2016) Analysis of Micropolar and Power Law Fluid�Lubricated Slider and Journal Bearing with Partial Slip�Partial Slip Texture Configuration. Tribology Transactions, 59 (5). pp. 896-910. ISSN 10402004

Altaf, K. and Rani, A.M.A. and Woldemichael, D.E. and Lemma, T.A. and Jian, C.Z. and Fiqri, M.H. (2016) Application of additive manufacturing/3D printing technologies and investment casting for prototype development of polycrystalline diamond compact (PDC) drill bit body. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6514-6518. ISSN 18196608

Srinivasa Rao, P. and Bawazir, A.F.O. and Awang, M. and Rani, A.M.A. and Jebaraj, S. (2016) Effect of tool geometrical parameters on friction stir welding joint properties of aluminum alloy AA6061. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13053-13058. ISSN 18196608

Qayyum, J.A. and Altaf, K. and Mahmood, A. and Shah, M. and Rani, A.M.A. (2016) Grain refinement of LM25 Aluminum alloy casting using sloping plate process. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13049-13052. ISSN 18196608

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2016) Load capacity coefficient evaluation of three-layered journal bearing with slip. Jurnal Teknologi, 78 (6-10). pp. 39-43. ISSN 01279696

Moayedfar, M. and Rani, A.M.A. and Emamian, S.S. and Haghighizadeh, A. and Jafari, N. (2016) Manufacture of medical orthopaedic implants using computed tomography imaging and rapid prototyping. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 177-180. ISSN 18196608

Krishnan, S. and Nagarajan, T. and Rani, A.M.A. and Ambaraj, W. and Ramiah, R. (2016) Rehabilitation for foot/ankle - Continuous Passive motion (CPM) using Shape Memory Alloy (SMA) actuated Stewart platform. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12908-12912. ISSN 18196608

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Nagarajan, T. and Hashim, F.M. (2016) Stability analysis of double porous and surface porous layer journal bearing. Tribology - Materials, Surfaces and Interfaces, 10 (1). pp. 19-25. ISSN 17515831

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of couple stress fluid lubricated partially textured slip slider and journal bearing using narrow groove theory. Tribology International, 69. pp. 1-9. ISSN 0301679X

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered film journal bearing with partial slip surface. Advanced Materials Research, 903. pp. 215-220. ISSN 10226680

Manikya Kanti, K. and Srinivasa Rao, P. and Ranga Janardhana, G. and Rani, A.M.A. (2014) Mathematical modeling for the prediction of depth of penetration in double pulse GMA welding using fractional factorial method. Applied Mechanics and Materials, 660. pp. 347-351. ISSN 16609336

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Analysis of Journal Bearing with Double-Layer Porous Lubricant Film: Influence of Surface Porous Layer Configuration. Tribology Transactions, 56 (5). pp. 841-847. ISSN 10402004

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Analysis of journal bearing considering the effects of surface layer and couple stress fluids. Asian Journal of Scientific Research, 6 (2). pp. 315-322. ISSN 19921454

Sagar, A. and Rani, A.M.A. (2013) Comparative study on data acquisition techniques and solid reconstruction algorithm for quantitative ulcer wound assessment. Asian Journal of Scientific Research, 6 (3). pp. 423-433. ISSN 19921454

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Load capacity of partially textured journal bearing with trapezoidal recess. Applied Mechanics and Materials, 315. pp. 830-834. ISSN 16609336

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Analysis of slider and journal bearing using partially textured slip surface. Tribology International, 56. pp. 121-128. ISSN 0301679X

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Analysis of two-layered porous journal bearing using the Brinkman model. Journal of Applied Sciences, 12 (24). pp. 2610-2615. ISSN 18125654

Ibrahim, I. and Rani, A.M.A. and Zainuddin, A. and Anua, M.R.M. (2012) Centrifugal compressor cooler fan high vibration: A case study. Australian Journal of Mechanical Engineering, 9 (1). pp. 1-10. ISSN 14484846

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Partially textured slider and journal bearing analysis. Jurnal Teknologi (Sciences and Engineering), 58 (SUPPL.). pp. 77-84. ISSN 01279696

Altaf, K. and Raghavan, V.R. and Rani, A.M.A. (2011) Comparative thermal analysis of circular and profiled cooling channels for injection mold tools. Journal of Applied Sciences, 11 (11). pp. 2068-2071. ISSN 18125654

Mahamat, A.T.Z. and Rani, A.M.A. and Husain, P. (2011) Machining of cemented tungsten carbide using EDM. Journal of Applied Sciences, 11 (10). pp. 1784-1790. ISSN 18125654

Krishna, S. and Nagarajan, T. and Rani, A.M.A. (2011) Review of current development of pneumatic artificial muscle. Journal of Applied Sciences, 11 (10). pp. 1749-1755. ISSN 18125654

Ahmad, F. and Raza, M.R. and Rani, A.M.A. and Jason Lo, S.H. (2011) Wear properties of alumina particles reinforced aluminium alloy matrix composite. Journal of Applied Sciences, 11 (9). pp. 1673-1677. ISSN 18125654

Conference or Workshop Item

Subramaniam, K. and Rani, A.M.A. and Zainuddin, A.A. and Kurappa, L.G. and Appannah, Y. (2023) Investigation of Force Analysis Stewart Platform Actuated by Shape Memory Alloy (SMA). In: UNSPECIFIED.

Khan, S.F. and Noor, Z.N.M. and Rani, A.M.A. (2021) Analysis and evaluation of optimized lower limb prosthetic device. In: UNSPECIFIED.

Al-Amin, N.A.-B.M.N. and Rani, A.M.A. and Awang, M.N. and Rani, M.N.A. and Ishar, N.A. and Thompson, H.M. and Hassan, M.H. and Zakir, B.M. and Hassan, A.T. (2021) Simulation-enabled design and analysis of globe valve. In: UNSPECIFIED.

Danish, M. and Ginta, T.L. and Rani, A.M.A. and Carou, D. and Davim, J.P. and Rubaiee, S. and Ghazali, S. (2019) Investigation of surface integrity induced on AZ31C magnesium alloy turned under cryogenic and dry conditions. In: UNSPECIFIED.

Razak, M.A. and Rani, A.M.A. and Saad, N.M. and Littlefair, G. and Aliyu, A.A. (2018) Controlling corrosion rate of Magnesium alloy using powder mixed electrical discharge machining. In: UNSPECIFIED.

Ali, S. and Rani, A.M.A. and Altaf, K. and Baig, Z. (2018) Investigation of Boron addition and compaction pressure on the compactibility, densification and microhardness of 316L Stainless Steel. In: UNSPECIFIED.

Qayyum, J.A. and Altaf, K. and Rani, A.M.A. and Ahmad, F. and Qadir, H.A. and Amin, W. (2018) Metal Injection Molding Process Parameters as A Function of Filling Performance of 3D Printed Polymer Mold. In: UNSPECIFIED.

Pedapati, S.R. and Shasidaran and Kamal, S. and Rani, A.M.A. (2017) Optimum welding parameter for GMA welding using soft computing techniques. In: UNSPECIFIED.

Zain, M.Z.M. and Rani, A.M.A. and Majid, M.A.A. (2016) Analysis of reconfigurable assembly system framing systems in automotive industry. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.A. and Ahmad, F. and Aslam, M. (2016) Rapid tooling for powder injection moulding process. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Sufian, S. and Mohamed, N.M. (2015) Analysis of CNT additives in porous layered thin film lubrication with electric double layer. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Analysis of two-layered journal bearing lubricated with ferrofluid. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Awang, M. and Lias, M.R. and Rani, A.M.A. (2014) Nonlinear analysis of spur gear pair with time-varying mesh stiffness. In: UNSPECIFIED.

Omer, M.A. and Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2014) Pressure distribution in hydrodynamic journal bearing with lubricants additives. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.A. (2014) Thermal conductivity augmentation of epoxy injection moulds for cooling time reduction. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Analysis of couple stress fluid lubricated journal bearing with partial slip surface. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2013) Load capacity of partially textured slip parallel slider and concentric journal bearing using narrow groove theory. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2012) Analysis of partially textured slider and journal bearing. In: UNSPECIFIED.

Krishnan, S. and Nagarajan, T. and Rani, A.M.A. and Rao, T. (2012) Silk Pneumatic Artificial Muscle (SPAM) construction for bio-medical engineering application. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.A. and Raghavan, V.R. (2011) Fabrication of circular and Profiled Conformal Cooling Channels in aluminum filled epoxy injection mould tools. In: UNSPECIFIED.

Jamaludin, N.M. and Rani, A.M.A. (2011) Optimum configuration of fin trees in cooling channels of injection moulding process. In: UNSPECIFIED.

Gizaw, M. and Rani, A.M.A. and Yusof, Y. (2011) STEP based product data model for turn-mill operations. In: UNSPECIFIED.

Mahamat, A.Z. and Rani, A.M.A. and Husain, P. (2011) Synthesizing and characterization of Cu-WC-Si composite prepared by using planetary ball milling. In: UNSPECIFIED.

Book

Katiyar, J.K. and Rani, A.M.A. and Sulaiman, M.H. and Barman, U. and Masset, P.J. and Rao, T.V.V.L.N. (2023) Recent Advances of Tribology in Sustainable Manufacturing. CRC Press, pp. 1-28. ISBN 9781003808213; 9781032426310

Katiyar, J.K. and Rao, T.V.V.L.N. and Rani, A.M.A. and Sulaiman, M.H. and Paulo Davim, J. (2023) Tribology in Sustainable Manufacturing. CRC Press, pp. 1-281. ISBN 9781003808213; 9781032426310

Danish, M. and Yasir, M. and Mia, M. and Nazir, K. and Ahmed, T. and Rani, A.M.A. (2020) High speed machining of magnesium and its alloys. Elsevier, pp. 263-282. ISBN 9780128150207; 9780128150214

Rani, A.M.A. and Hani, A.F.M. and El-Tegani, N. and Chong, E. and Sagar, A. (2014) Quantitative assessment of ulcer wound volume. CRC Press, pp. 219-272. ISBN 9781482215793; 9781482215786