Article

Nordin, N. and Abdul Karim, Z.A. and Othman, S. and Raghavan, V.R. and Adzila, S. and Md Seri, S. and Md Taib, I. and Ramli, Y. (2017) Assessment of turbulence model performance adopted near wall treatment for a sharp 90° 3-D turning diffuser. Communications in Computer and Information Science, 751. pp. 259-273. ISSN 18650929

Altaf, K. and Abdul Rani, A.M. and Ahmad, F. and Baharom, M. and Raghavan, V.R. (2016) Determining the effects of thermal conductivity on epoxy molds using profiled cooling channels with metal inserts. Journal of Mechanical Science and Technology, 30 (11). pp. 4901-4907. ISSN 1738494X

Sulaiman, S.A. and Miin, C.S. and Naz, M.Y. and Raghavan, V.R. (2016) Particle Image Velocimetry of a Swirling Fluidized Bed at Different Blade Angles. Chemical Engineering and Technology, 39 (6). pp. 1151-1160. ISSN 09307516

Nordin, N. and Karim, Z.A.A. and Othman, S. and Raghavan, V.R. and Seri, S.M. and Shaari, M.F. and Adzila, S. (2016) Validation by piv of the numerical study of flow in the two-dimensional turning diffuser. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11948-11953. ISSN 18196608

Miin, C.S. and Sulaiman, S.A. and Raghavan, V.R. and Heikal, M.R. and Naz, M.Y. (2015) Hydrodynamics of multi-sized particles in stable regime of a swirling bed. Korean Journal of Chemical Engineering, 32 (11). pp. 2361-2367. ISSN 02561115

Bin Md Seri, S. and Bin Abdul Karim, Z.A. and Bin Salleh, H. and Mohideen Batcha, M.F. and Raghavan, V.R. (2014) Hydrodynamic characteristics of flow around tube bank with integral wake splitter. Applied Mechanics and Materials, 660. pp. 649-653. ISSN 16609336

Seri, S.M. and Abdul Karim, Z.A. and Batcha, M.F.M. and Raghavan, V.R. (2014) Tube bank with integral wake splitter performance at Reynolds number 5000 to 50000. Applied Mechanics and Materials, 465-46. pp. 546-551. ISSN 16609336

Nordin, N. and Abdul Karim, Z.A. and Othman, S. and Raghavan, V.R. (2014) Verification of fully developed flow entering diffuser and particle image velocimetry procedures. Applied Mechanics and Materials, 465-46. pp. 1352-1356. ISSN 16609336

Nordin, N. and Abdul Karim, Z.A. and Othman, S. and Raghavan, V.R. (2014) The performance of turning diffusers at various inlet conditions. Applied Mechanics and Materials, 465-46. pp. 597-602. ISSN 16609336

Venkiteswaran, V.K. and Sulaiman, S.A. and Raghavan, V.R. (2013) Comparative study of the hydrodynamic performance of shorter and longer blades in a swirling fluidized bed. Advanced Materials Research, 772. pp. 560-565. ISSN 10226680

Nordin, N. and Karim, Z.A.A. and Othman, S. and Raghavan, V.R. (2013) Design and development of low subsonic wind tunnel for turning diffuser application. Advanced Materials Research, 614-61. pp. 586-591. ISSN 10226680

Batcha, M.F.M. and Nawi, M.A.M. and Sulaiman, S.A. and Raghavan, V.R. (2013) Numerical investigation of airflow in a swirling fluidized bed. Asian Journal of Scientific Research, 6 (2). pp. 157-166. ISSN 19921454

Altaf, K. and Majdi Abdul Rani, A. and Raghavan, V.R. (2013) Prototype production and experimental analysis for circular and profiled conformal cooling channels in aluminium filled epoxy injection mould tools. Rapid Prototyping Journal, 19 (4). pp. 220-229. ISSN 13552546

Faizal, M. and Seri, S.M. and Al-Hafiz, M. and Raghavan, V.R. (2012) CFD studies on velocity distribution of air in a swirling fluidized bed. Advanced Materials Research, 468-47. pp. 25-29. ISSN 10226680

Nordin, N. and Raghavan, V.R. and Othman, S. and Karim, Z.A.A. (2012) Compatibility of 3-D turning diffusers by means of varying area ratios and outlet-inlet configurations. ARPN Journal of Engineering and Applied Sciences, 7 (6). pp. 708-713. ISSN 18196608

Tiruselvam, R. and Raghavan, V.R. (2012) Double tube heat exchanger with novel enhancement: Part I-flow development length and adiabatic friction factor. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 48 (4). pp. 641-651. ISSN 09477411

Jun, G.J. and Raghavan, V.R. and Sing, C.Y. (2012) Experimental study on the hydrodynamics of swirling fluidized bed. Applied Mechanics and Materials, 229-23. pp. 756-760. ISSN 16609336

Mohideen, M.F. and Md Seri, S. and Raghavan, V.R. (2012) Fluidization of Geldart Type-D particles in a swirling fluidized bed. Applied Mechanics and Materials, 110-11. pp. 3720-3727. ISSN 16609336

Mohideen, M.F. and Sreenivasan, B. and Sulaiman, S.A. and Raghavan, V.R. (2012) Heat transfer in a swirling fluidized bed with geldart type-D particles. Korean Journal of Chemical Engineering, 29 (7). pp. 862-867. ISSN 02561115

Batcha, M.F.M. and Sulaiman, S.A. and Raghavan, V.R. (2012) Hydrodynamics of oil palm frond in a swirling fluidized bed dryer. Applied Mechanics and Materials, 117-11. pp. 1829-1833. ISSN 16609336

Nordin, N. and Raghavan, V.R. and Othman, S. and Karim, Z.A.A. (2012) Numerical investigation of turning diffuser performance by varying geometric and operating parameters. Applied Mechanics and Materials, 229-23. pp. 2086-2093. ISSN 16609336

Venkiteswaran, V.K. and Jun, G.J. and Sing, C.Y. and Sulaiman, S.A. and Raghavan, V.R. (2012) Variation of bed pressure drop with particle shapes in a swirling fluidized bed. Journal of Applied Sciences, 12 (24). pp. 2598-2603. ISSN 18125654

Altaf, K. and Raghavan, V.R. and Rani, A.M.A. (2011) Comparative thermal analysis of circular and profiled cooling channels for injection mold tools. Journal of Applied Sciences, 11 (11). pp. 2068-2071. ISSN 18125654

Chin, W.M. and Raghavan, V.R. (2011) Effect of the moments of probability density function for non-uniform air flow distribution on the hydraulic performance of a fin-tube heat exchanger. Journal of Applied Sciences, 11 (11). pp. 1952-1958. ISSN 18125654

Batcha, M.F.M. and Raghavan, V.R. (2011) Experimental studies on a swirling fluidized bed with annular distributor. Journal of Applied Sciences, 11 (11). pp. 1980-1986. ISSN 18125654

Chin, W.M. and Raghavan, V.R. (2011) On the adverse influence of higher statistical moments of flow maldistribution on the performance of a heat exchanger. International Journal of Thermal Sciences, 50 (4). pp. 581-591. ISSN 12900729

Chin, W.M. and Raghavan, V.R. (2011) The influence of the moments of probability density function for flow maldistribution on the thermal performance of a fin-tube heat exchanger. International Journal of Thermal Sciences, 50 (10). pp. 1942-1953. ISSN 12900729

Ramahlingam, T. and Raghavan, V.R. (2011) The tube side heat transfer coefficient for enhanced double tube by Wilson plot analysis. Journal of Applied Sciences, 11 (10). pp. 1725-1732. ISSN 18125654

Othman, S. and Wahab, A.A. and Raghavan, V.R. (2010) Validation by PIV of the numerical study of flow in the plenum chamber of a swirling fluidized bed. CFD Letters, 2 (2). pp. 85-96. ISSN 21801363

Ghafir, M.F.A. and Batcha, M.F.M. and Raghavan, V.R. (2009) Prediction of the thermal conductivity of metal hydrides - The inverse problem. International Journal of Hydrogen Energy, 34 (16). pp. 7125-7130. ISSN 03603199

Othman, S. and Wahab, A.A. and Raghavan, V.R. (2009) Statistical analysis on the design of flow modifying centre-bodies in a plenum chamber. CFD Letters, 1 (2). pp. 78-86. ISSN 21801363

Conference or Workshop Item

Nordin, N. and Karim, Z.A.A. and Othman, S. and Raghavan, V.R. and Batcha, M.F.M. and Hariri, A. and Basharie, S.M. (2017) Flow characteristics of 3-D turning diffuser using particle image velocimetry. In: UNSPECIFIED.

Suzairin and Faizal, M. and Raghavan, V.R. and Ambri, Z. (2013) Numerical simulation of cross-flow in a bank of tubes with three rows in the subcritical region of Reynolds. In: UNSPECIFIED.

Guangul, F.M. and Sulaiman, S.A. and Raghavan, V.R. (2012) Elemental and thermo-chemical analysis of oil palm fronds for biomass energy conversion. In: UNSPECIFIED.

Hamdan, M. and Sabudin, S. and Faizal, M. and Raghavan, V.R. (2012) Experimental studies on oil palm frond drying using swirling fluidized bed dryer. In: UNSPECIFIED.

Guangul, F.M. and Sulaiman, S.A. and Raghavan, V.R. (2012) Gasification and effect of gasifying temperature on syngas quality and tar generation: A short review. In: UNSPECIFIED.

Hing, Y.K. and Raghavan, V.R. and Meng, C.W. (2012) Investigation of contact resistance for fin-tube heat exchanger by means of tube expansion. In: UNSPECIFIED.

Yet, N.M. and Raghavan, V.R. and Chinc, W.M. (2012) Numerical study of cross flow fan performance in an indoor air conditioning unit. In: UNSPECIFIED.

Fye, C.K. and Raghavan, V.R. and Meng, C.W. (2012) Study on a two-evaporator system for humidity control. In: UNSPECIFIED.

Vinod Kumar, V. and Raghavan, V.R. (2011) Developments in fluidized bed technology A review. In: UNSPECIFIED.

Mohideen, M.F. and Faiz, M. and Salleh, H. and Zakaria, H. and Raghavan, V.R. (2011) Drying of oil palm frond via swirling fluidization technique. In: UNSPECIFIED.

Altaf, K. and Rani, A.M.A. and Raghavan, V.R. (2011) Fabrication of circular and Profiled Conformal Cooling Channels in aluminum filled epoxy injection mould tools. In: UNSPECIFIED.

Yudin, A.S.M. and Raghavan, V.R. and Narahari, M. (2011) A mathematical model for residence time distribution analysis in swirling fluidized bed. In: UNSPECIFIED.

Marneni, N. and Raghavan, V.R. (2009) Natural convection flow in vertical channel due to ramped wall temperature at one boundary. In: UNSPECIFIED.