Permanasari, A.A. and Rusli, M.H. and Puspitasari, P. and Sukarni, S. and Zaine, S.N.A. and Wahyunengsih, W. (2023) Experimental Study on the Heat Transfer Performance of Nanofluid MnFe2O4-Ethylene Glycol/Water on Double-Pipe Heat Exchanger. Key Engineering Materials, 941. pp. 183-190. ISSN 10139826

Permanasari, A.A. and Ramadani, R. and Sukarni, S. and Puspitasari, P. and Mohamed, N.M. and Pratama, M.M.A. (2023) Fuel Properties and Chemical Characterizations of Waste Cooking Oil Biodiesel-Diesel (B20) with Lemongrass Essential Oil Bioadditive. In: UNSPECIFIED.

Permanasari, A.A. and Faridi, A.F. and Sukarni, S. and Puspitasari, P. and Mohamed, N.M. and Pratama, M.M.A. (2023) Heat Transfer Characteristics on Shell and Tube Heat Exchanger Using TiO2/Water-Ethylene Glycol Nanofluid. In: UNSPECIFIED.

Pratiwi, N.I. and Mufti, N. and Diantoro, M. and Muntholib and Sufian, S. and Puspitasari, P. (2023) Photocatalyst activity of TiO2/SWCNT composite on floating cork for degradation of methylene blue by solar simulator. In: UNSPECIFIED.

Puspitasari, P. and Ariffandy, W. and Budi, L.S. and Shaharun, M.S. (2022) Structural and Magnetic Properties of Ni-doped Yttrium Iron Garnet (Y3Fe5-XNixO12) Nanopowders Synthesized by Self-Combustion Method. Materials Research, 25. ISSN 15161439

Permanasari, A.A. and Putra, S.A. and Puspitasari, P. and Sukarni, S. and Zaine, S.N.A. and Wahyunengsih, W. (2021) Angle of inclination and radiation intensity variation effects on the flat plate solar collector's performance using graphene oxide (GO)-water nanofluid. In: UNSPECIFIED.

Permanasari, A.A. and Mauludi, M.N. and Sukarni, S. and Puspitasari, P. and Mohamed, N.M. (2021) Exhaust gas emission and performance in diesel engine using diesel-biodiesel blends with orange essential oil bioadditive. In: UNSPECIFIED.

Permanasari, A.A. and Budiearso, A.B. and Sukarni, S. and Puspitasari, P. and Zaine, S.N.A. and Wahyunengsih, W. (2021) Performance analysis of a H-Darrieus wind turbine for a Naca 0015 Airfoil: CFD and RSM-based design optimization. In: UNSPECIFIED.

Permanasari, A.A. and Mauludi, M.N. and Sukarni, S. and Puspitasari, P. and Zaine, S.N.A. and Wahyunengsih, W. (2021) The Potential of Waste Cooking Oil B20 Biodiesel Fuel with Lemon Essential Oil Bioadditive: Physicochemical Properties, Molecular Bonding, and Fuel Consumption. Bulletin of Chemical Reaction Engineering and Catalysis, 16 (3). pp. 555-564. ISSN 19782993

Puspitasari, P. and Julia, M. and Permanasari, A.A. and Shaharun, M.S. and Pasang, T. and Arif, M.F. (2021) Synthesis and Characterization of Nickel�Cobalt Oxide (NiCo2O4) for Promising Supercapacitor Material. In: UNSPECIFIED.

Mohd Ridzuan, N.D. and Shaharun, M.S. and Din, I.U. and Puspitasari, P. (2021) Synthesis and Characterization of Nickel�Magnesium Catalyst Supported on Reduced Graphene Oxide. In: UNSPECIFIED.

Puspitasari, P. and Permanasari, A.A. and Shaharun, M.S. and Tsamroh, D.I. (2020) Heat transfer characteristics of NiO nanofluid in heat exchanger. In: UNSPECIFIED.

Puspitasari, P. and Permanasari, A.A. and Shaharun, M.S. and Muhammad, A. (2020) High saturation superparamagnetic properties of low-temperature sintering of nickel oxide. In: UNSPECIFIED.

Diyan Mohd Ridzuan, N. and Shima Shaharun, M. and Mun Lee, K. and Ud Din, I. and Puspitasari, P. (2020) Influence of nickel loading on reduced graphene oxide-based nickel catalysts for the hydrogenation of carbon dioxide to methane. Catalysts, 10 (5). ISSN 20734344

Permanasari, A.A. and Kuncara, B.S. and Puspitasari, P. and Sukarni, S. and Ginta, T.L. and Irdianto, W. (2019) Convective heat transfer characteristics of TiO2-EG nanofluid as coolant fluid in heat exchanger. In: UNSPECIFIED.

Permanasari, A.A. and Puspitasari, P. and Sukarni, S. and Irdianto, W. and Ginta, T.L. and Gilang, D. (2019) Thermophysical properties and heat transfer performance of TiO2-Distilled water nanofluid using shell and tube heat exchanger. In: UNSPECIFIED.

Kustono, D. and Puspitasari, P. and Wahono and Ananda, A.S.S. and Shaharun, M.S. and Muhammad, A. (2019) Time dependence on magnetic properties of nanomaterial manganese-zinc ferrite (Mn0.8Zn0.2Fe2O4) by co-precipitation method. Nanosistemi, Nanomateriali, Nanotehnologii, 17 (2). pp. 361-370. ISSN 18165230

Puspitasari, P. and Fauzan, R. and Ginta, T.L. and Mustapha, M. and Puspitasari, D. (2018) Morphology of aluminium with nickel addition on sand casting process. Journal of Achievements in Materials and Manufacturing Engineering, 87 (1). pp. 13-17. ISSN 17348412

Puspitasari, P. and Dewi Izzatus, T. and Achyarsyah, M. and Bandanajaya, B. and Puspitasari, D. (2018) Multistage artificial aging optimization for tensile properties of Duralium using Response Surface Method (RSM). In: UNSPECIFIED.

Puspitasari, D. and Ginta, T.L. and Mustapha, M. and Sallih, N. and Puspitasari, P. (2018) Statistical optimization of stress relieving parameters on closed cell aluminium foam using central composite design. Archives of Materials Science and Engineering, 89 (2). pp. 55-63. ISSN 18972764

Puspitasari, D. and Ginta, T.L. and Puspitasari, P. and Mustapha, M. (2018) The effect of thermal processing parameters on the mechanical properties of aluminium alloy foam. Journal of Achievements in Materials and Manufacturing Engineering, 91 (1). pp. 12-17. ISSN 17348412

Puspitasari, P. and Yahya, N. and Andoko and Ekaputri, J.J. and Risdanareni, P. (2016) Properties of Y3Fe5O12(YIG) as nanocatalyst for ammonia formation produced from magnetic induction method (MIM). Materials Science Forum, 857. pp. 146-150. ISSN 02555476

Yahya, N. and Puspitasari, P. and Latiff, N.R.A. (2013) Hardness improvement of dental amalgam using zinc oxide and aluminum oxide nanoparticles. Advanced Structured Materials, 29. pp. 9-32. ISSN 18698433

Yahya, N. and Puspitasari, P. (2013) Y3Fe5O12nanocatalyst for green ammonia production by using magnetic induction method. Journal of Nano Research, 21. pp. 131-137. ISSN 16625250

Puspitasari, P. and Razak, J.A. and Yahya, N. (2012) Ammonia synthesis using Magnetic Induction Method (MIM). In: UNSPECIFIED.

Yahya, N. and Puspitasari, P. and Koziol, K. and Pavia, G. (2012) New Approach to ammonia synthesis by catalysis in magnetic field. Journal of Nano Research, 16. pp. 119-130. ISSN 16625250

Razak, J.A. and Sufian, S. and Ku Shaari, K.Z. and Puspitasari, P. and Hoe, T.K. and Yahya, N. (2012) Synthesis, characterization and application of Y3Fe 5O12 nanocatalyst for green production of NH3 using magnetic induction method (MIM). In: UNSPECIFIED.

Yahya, N. and Puspitasari, P. and Koziol, K. and Guiseppe, P. (2011) Ammonia synthesis. Advanced Structured Materials, 5. pp. 395-413. ISSN 18698433

Puspitasari, P. and Yahya, N. and Zabidi, N.A.M. and Ahmad, N.A. (2011) Comparison of mechanical properties and magnetic properties of Mn0.8Zn0.2Fe2O4 synthesized by conventional ball milling and self combustion method. Journal of Applied Sciences, 11 (7). pp. 1199-1205. ISSN 18125654

Puspitasari, P. and Yahya, N. (2011) Development of ammonia synthesis. In: UNSPECIFIED.

Yahya, N. and Daud, H. and Tajuddin, N.A. and Daud, H.M. and Shafie, A. and Puspitasari, P. (2010) Application of ZnO nanoparticles EM wave detector prepared by solgel and self-combustion techniques. Journal of Nano Research, 11. pp. 25-34. ISSN 16625250

Ahmad, N.A. and Yahya, N. and Zakariah, M.H. and Puspitasari, P. (2009) Development of a powerful EM transmitter. In: UNSPECIFIED.

Yahya, N. and Zahari, S.M.S.N.S. and Ramli, A. and Mohamad, N.M. and Puspitasari, P. and Che Zul, N.L. (2009) Synthesis and characterization of zinc oxide nanoparticles prepared via precipitation and self- combustion methods. In: UNSPECIFIED.