Nuthalapati, S. and Kee, K.E. and Ismail, M.C. and Jumbri, K. and Pedapati, S.R. (2024) Comparative study of corrosion behaviour and microstructural analysis of as-received and sensitized SS304 U-bend samples under perlite thermal insulation using chloride drip test. Engineering Failure Analysis, 159.

Hassan, A. and Pedapati, S.R. (2024) Exploration of Possible Defects Originating in Al-5083 Laminates Synthesized Through Friction Stir Additive Manufacturing Technique. Lecture Notes in Mechanical Engineering. pp. 309-318. ISSN 21954356

Marode, R.V. and Awang, M. and Lemma, T.A. and Pedapati, S.R. and Hassan, A. and Janga, V.S.R. and Alam, M.A. and Loyte, A. and Devarajan, Y. (2024) Friction stir processing of AZ91 hybrid composites with exfoliated multi-layered graphene: A Taguchi-Grey relational analysis. Journal of Alloys and Compounds, 972.

Hassan, A. and Altaf, K. and Awang, M. and Pedapati, S.R. and Ahmed, N. and Marode, R.V. (2024) Multi-objective optimization of friction stir additively manufactured Al-7075 multi-layered laminates. Journal of Alloys and Compounds, 993.

Marode, R.V. and Awang, M. and Lemma, T.A. and Pedapati, S.R. and Hassan, A. and Janga, V.S.R. (2024) Numerical analysis of temperature and material flow predictions with defects in the friction stir processing of AZ91 alloy: An advanced meshfree SPH technique. Engineering Analysis with Boundary Elements, 161. pp. 48-69.

Nuthalapati, S. and Kee, K.E. and Pedapati, S.R. and Jumbri, K. (2024) A review of chloride induced stress corrosion cracking characterization in austenitic stainless steels using acoustic emission technique. Nuclear Engineering and Technology, 56 (2). pp. 688-706.

Shaik, N.B. and Pedapati, S.R. and Othman, A.R. and Dzubir, F.A.B.A. (2023) A Case Study to Predict Structural Health of a Gasoline Pipeline Using ANN and GPR Approaches. Lecture Notes in Mechanical Engineering. pp. 611-624. ISSN 21954356

Hassan, A. and Pedapati, S.R. and Awang, M. and Soomro, I.A. (2023) A Comprehensive Review of Friction Stir Additive Manufacturing (FSAM) of Non-Ferrous Alloys. Materials, 16 (7).

Bin Mohd Nor, A.K. and Pedapati, S.R. and Muhammad, M. and Abdul Majid, M.A. (2023) Demonstrating Aleatoric Uncertainty in Remaining Useful Life Prediction Using LSTM with Probabilistic Layer. Lecture Notes in Mechanical Engineering. pp. 529-544.

Soomro, I.A. and Pedapati, S.R. and Awang, M. and Alam, M.A. (2023) Effects of double pulse welding on microstructure, texture, and fatigue behavior of DP590 steel resistance spot weld. International Journal of Advanced Manufacturing Technology, 125 (3-4). pp. 1271-1287.

Hassan, A. and Awang, M. and Pedapati, S.R. and Altaf, K. and Marode, R.V. and Ahmed, S.W. (2023) Experimental investigation on tool pin profile for defect-free multi-layered laminates using friction stir additive manufacturing. Results in Engineering, 20.

Marode, R.V. and Pedapati, S.R. (2023) Friction Stir Processing of Magnesium Metal Matrix Composites: A Review. Lecture Notes in Mechanical Engineering. pp. 35-46. ISSN 21954356

Marode, R.V. and Pedapati, S.R. and Lemma, T.A. and Loyte, A. and Devarajan, Y. and Thandavamoorthy, R. (2023) Influence of Silicon Carbide on Microhardness and Corrosion Behavior of AZ91/SiC Surface Composites Processed through Friction Stir Processing: Multi-Response Optimization Using Taguchi-Grey Relational Analysis. Silicon, 15 (16). pp. 6921-6943.

Hassan, A. and Awang, M. and Pedapati, S.R. and Altaf, K. and Ahmed, N. and Marode, R.V. and Ahmed, S.W. and Soomro, I.A. (2023) Investigation on Surface Hardness and Microstructure Evolution in AA 7075-T651 Multi-Layered Laminate Fabricated Through Friction Stir Additive Manufacturing. Iranian Journal of Materials Science and Engineering, 20 (4). ISSN 17350808

Kathiravan, D.M. and Marode, R.V. and Pedapati, S.R. and Lemma, T.A. (2023) Numerical Investigation of Tool Stirring Speed in Friction Stir Processing of AA7075 Using Smoothed-Particle Hydrodynamics. In: UNSPECIFIED.

Janga, V.S.R. and Awang, M. and Pedapati, S.R. (2023) A Numerical Study on the Effect of Tool Speeds on Temperatures and Material Flow Behaviour in Refill Friction Stir Spot Welding of Thin AA7075-T6 Sheets. Materials, 16 (8).

Marode, R.V. and Pedapati, S.R. and Lemma, T.A. and Awang, M. (2023) A review on numerical modelling techniques in friction stir processing: current and future perspective. Archives of Civil and Mechanical Engineering, 23 (3). ISSN 16449665

Nor, A.K.M. and Pedapati, S.R. and Muhammad, M. and Leiva, V. (2022) Abnormality Detection and Failure Prediction Using Explainable Bayesian Deep Learning: Methodology and Case Study with Industrial Data. Mathematics, 10 (4). ISSN 22277390

Bellala, S.S.K. and Pedapati, S.R. and Marode, R.V. (2022) COMPARATIVE STUDY OF THERMAL MODELLING USING EULERIAN AND SPH TECHNIQUES FOR FSW. IET Conference Proceedings, 2022 (22). pp. 76-82. ISSN 27324494

Sayani, J.K.S. and Lal, B. and Pedapati, S.R. (2022) Comprehensive Review on Various Gas Hydrate Modelling Techniques: Prospects and Challenges. Archives of Computational Methods in Engineering, 29 (4). pp. 2171-2207. ISSN 11343060

Sayani, J.K.S. and Sivabalan, V. and Foo, K.S. and Pedapati, S.R. and Lal, B. (2022) Development of a Prediction Model for Gas Hydrate Formation in Multiphase Pipelines by Artificial Intelligence. Chemical Engineering and Technology, 45 (8). pp. 1482-1488. ISSN 09307516

Marode, R.V. and Pedapati, S.R. and Lemma, T.A. (2022) Effect of Process Parameters on AZ91/SiC Surface Composites for Lightweight E-vehicles. In: UNSPECIFIED.

Sayani, J.K.S. and Ho, K.J. and Lal, B. and Pedapati, S.R. (2022) Experimental and simulation studies on the phase behaviour for gas hydrates in a CO2 rich gas dominant multiphase pipeline system. Canadian Journal of Chemical Engineering, 100 (11). pp. 3419-3427. ISSN 00084034

Sayani, J.K.S. and Khan, M.S. and Pedapati, S.R. and Lal, B. (2022) Experimental investigation on the phase behaviour for gas hydrates in CO2 rich gas mixtures & multiphase system. Energy Reports, 8. pp. 14793-14804. ISSN 23524847

Ahmad, K. and Awang, M. and Pedapati, S.R. and Abu Bakar, A. and Mukhtar, Z.Z. (2022) Numerical Simulation of Heat Generation During Plunging Stage in Orbital Friction Stir Welding on Pipe Aluminum Alloys AA6061-T6 Adapting a Pure Lagrangian Formulation. Advanced Structured Materials, 167. pp. 453-464. ISSN 18698433

Soomro, I.A. and Pedapati, S.R. and Awang, M. and Soomro, A.A. and Alam, M.A. and Bhayo, B.A. (2022) Optimization and Modelling of Resistance Spot Welding Process Parameters for Quality Improvement Using Taguchi Method and Artificial Neural Network. Iranian Journal of Materials Science and Engineering, 19 (4). pp. 1-10. ISSN 17350808

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2022) Publisher Correction to: A review of advances in resistance spot welding of automotive sheet steels: emerging methods to improve joint mechanical performance (The International Journal of Advanced Manufacturing Technology, (2022), 118, 5-6, (1335-1366), 10.1007/s00170-021-08002-5). International Journal of Advanced Manufacturing Technology, 119 (9-10). p. 6875. ISSN 02683768

Shaik, N.B. and Benjapolakul, W. and Pedapati, S.R. and Bingi, K. and Thien Le, N. and Asdornwised, W. and Chaitusaney, S. (2022) Recurrent neural network-based model for estimating the life condition of a dry gas pipeline. Process Safety and Environmental Protection, 164. pp. 639-650. ISSN 09575820

Nor, A.K.M. and Pedapati, S.R. and Muhammad, M. (2022) Reducing Uncertainty in Failure Prediction Using Singular Value Decomposition Feature Selection. Lecture Notes in Electrical Engineering, 758. pp. 775-796. ISSN 18761100

Nor, A.K.M. and Pedapati, S.R. and Muhammad, M. (2022) Reducing the Aleatoric Uncertainties of Failure Prediction Using Singular Value Decomposition. Lecture Notes in Electrical Engineering, 758. pp. 755-774. ISSN 18761100

Shaik, N.B. and Pedapati, S.R. and B A Dzubir, F.A. (2022) Remaining useful life prediction of a piping system using artificial neural networks: A case study. Ain Shams Engineering Journal, 13 (2). ISSN 20904479

Marode, R.V. and Pedapati, S.R. and Lemma, T.A. and Janga, V.S.R. (2022) Thermo-Mechanical Modelling of Friction Stir Processing of AZ91 Alloy: Using Smoothed-Particle Hydrodynamics. Lubricants, 10 (12). ISSN 20754442

Patil, N.A. and Pedapati, S.R. and Marode, R.V. (2022) Wear Analysis of Friction Stir Processed AA7075-SiC-Graphite Hybrid Surface Composites. Lubricants, 10 (10). ISSN 20754442

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2022) A review of advances in resistance spot welding of automotive sheet steels: emerging methods to improve joint mechanical performance. International Journal of Advanced Manufacturing Technology, 118 (5-6). pp. 1335-1366. ISSN 02683768

Fadhli, M. and Pedapati, S.R. and Hamdan, H. (2021) Development of models for oil and gas pipeline condition prediction using regression analysis. In: UNSPECIFIED.

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2021) Double pulse resistance spot welding of dual phase steel: Parametric study on microstructure, failure mode and low dynamic tensile shear properties. Materials, 14 (4). pp. 1-19. ISSN 19961944

Patil, N.A. and Nasir, M.K.B.S. and Pedapati, S.R. and Mamat, O.B. (2021) Effect of graphite exfoliation through multipass friction stir processing on microstructure and mechanical properties of aluminium 7075-silicon carbide-graphite composites Einfluss der Graphitablösung durch Mehrfach-Rührreibschwei�en auf das Gefüge und die mechanischen Eigenschaften von Aluminium 7075-Siliciumkarbid-Graphit-Verbundwerkstoffen. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1080-1089. ISSN 09335137

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2021) Influence of in situ postweld heat treatment on microstructure and failure behavior of dual-phase steel resistance spot weld. International Journal of Advanced Manufacturing Technology, 114 (11-12). pp. 3739-3750. ISSN 02683768

Sayani, J.K.S. and Pedapati, S.R. and Kassim, Z. and Lal, B. (2021) Investigation on Thermodynamic Equilibrium Conditions of Methane Hydrates in Multiphase Gas-Dominant Pipelines. ACS Omega, 6 (4). pp. 2505-2512. ISSN 24701343

Patil, N.A. and Pedapati, S.R. and Mamat, O. and Lubis, A.M.H.S. (2021) Morphological characterization, statistical modeling and wear behavior of AA7075-Titanium Carbide-Graphite surface composites via Friction stir processing. Journal of Materials Research and Technology, 11. pp. 2160-2180. ISSN 22387854

Soomro, I.A. and Pedapati, S.R. and Awang, M. (2021) Optimization of postweld tempering pulse parameters for maximum load bearing and failure energy absorption in dual phase (DP590) steel resistance spot welds. Materials Science and Engineering: A, 803. ISSN 09215093

Nor, A.K.M. and Pedapati, S.R. and Muhammad, M. and Leiva, V. (2021) Overview of explainable artificial intelligence for prognostic and health management of industrial assets based on preferred reporting items for systematic reviews and meta-analyses. Sensors, 21 (23). ISSN 14248220

Nor, A.K.M. and Pedapati, S.R. and Muhammad, M. (2021) Reliability engineering applications in electronic, software, nuclear and aerospace industries: A 20 year review (2000�2020). Ain Shams Engineering Journal, 12 (3). pp. 3009-3019. ISSN 20904479

Shobri, N.N.S.M. and Pedapati, S.R. and Awang, M. (2021) Simulation of Friction Stir Spot Welding of Copper and Aluminium During Plunging Phase. In: UNSPECIFIED.

Shaik, N.B. and Pedapati, S.R. and Othman, A.R. and Bingi, K. and Dzubir, F.A.A. (2021) An intelligent model to predict the life condition of crude oil pipelines using artificial neural networks. Neural Computing and Applications, 33 (21). pp. 14771-14792. ISSN 09410643

Chitturi, V. and Pedapati, S.R. and Awang, M. (2020) Challenges in dissimilar friction stir welding of aluminum 5052 and 304 stainless steel alloys Herausforderungen beim artfremden Reibrührschwei�en von Aluminiumlegierungen 5052 und 304 rostfreiem Stahl. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 811-816. ISSN 09335137

Shaik, N.B. and Pedapati, S.R. and Taqvi, S.A.A. and Ahsan, S. and Dzubir, F.A.A. (2020) Classification of faults in oil and gas pipelines using support vector machines. Pertanika Journal of Science and Technology, 28 (Specia). pp. 173-184. ISSN 01287680

Patil, N.A. and Pedapati, S.R. and Mamat, O.B. and Hidayat Syah Lubis, A.M. (2020) Effect of SiC/fly ash reinforcement on surface properties of aluminum 7075 hybrid composites. Coatings, 10 (6). ISSN 20796412

Soomro, I.A. and Pedapati, S.R. (2020) Effect of multi pulse current treatment on microstructure and microhardness of resistance spot welded dual phase steel DP590 Auswirkung der Mehrfachimpulsstrombehandlung auf das Gefüge und die Mikrohärte des widerstandspunktgeschwei�ten Dualphasenstahls DP 590. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 699-705. ISSN 09335137

Chitturi, V. and Pedapati, S.R. and Awang, M. (2020) Effect of process parameters on friction stir lap welded 304 stainless steel and 5052 aluminium alloys. In: UNSPECIFIED.

Paramaguru, D. and Pedapati, S.R. and Awang, M. and Mohebbi, H. and Sharma, K.V. (2020) Effect of process parameters on mechanical properties of AA5052 joints using underwater friction stir welding. Journal of Mechanical Engineering and Sciences, 14 (1). pp. 6259-6271. ISSN 22894659

Chitturi, V. and Pedapati, S.R. and Awang, M. (2020) Investigation of weld zone and fracture surface of friction stir lap welded 5052 aluminum alloy and 304 stainless steel joints. Coatings, 10 (11). pp. 1-15. ISSN 20796412

Patil, N.A. and Zhongyan, N. and Pedapati, S.R. and Mamat, O.B. (2020) Investigation on effect of fly ash volume percentage on microstructure and microhardness of aa7075�fly ash surface composites via fsp. Lecture Notes in Mechanical Engineering. pp. 399-410. ISSN 21954356

Sahith, S.J.K. and Pedapati, S.R. and Lal, B. (2020) Investigation on gas hydrates formation and dissociation in multiphase gas dominant transmission pipelines. Applied Sciences (Switzerland), 10 (15). ISSN 20763417

Sayani, J.K.S. and Pedapati, S.R. and Lal, B. (2020) Phase behavior study on gas hydrates formation in gas dominant multiphase pipelines with crude oil and high CO2 mixed gas. Scientific Reports, 10 (1). ISSN 20452322

Shaik, N.B. and Pedapati, S.R. and Abd Dzubir, F.A. (2020) Remaining useful life prediction of crude oil pipeline by means of deterioration curves. Process Safety Progress, 39 (S1). ISSN 10668527

Shaik, N.B. and Pedapati, S.R. and Ammar Taqvi, S.A. and Othman, A.R. and Abd Dzubir, F.A. (2020) A feed-forward back propagation neural network approach to predict the life condition of crude oil pipeline. Processes, 8 (6). ISSN 22279717

Patil, N.A. and Pedapati, S.R. and Mamat, O.B. (2020) A review on aluminium hybrid surface composite fabrication using Friction Stir Processing. Archives of Metallurgy and Materials, 65 (1). pp. 441-457. ISSN 17333490

Awang, M. and Khalili, A.A. and Pedapati, S.R. (2020) A review: Thin protective coating for wear protection in high-temperature application. Metals, 10 (1). ISSN 20754701

Soomro, I.A. and Pedapati, S.R. (2019) Application of in situ post weld heat treatment using double pulse technology and its effect on microstructure and mechanical performance of resistance spot welded HSLA350 steel. International Journal of Advanced Manufacturing Technology, 105 (7-8). pp. 3249-3260. ISSN 02683768

Patil, N.A. and Safwan, A. and Pedapati, S.R. (2019) Effect of deposition methods on microstructure and mechanical properties of Al 7075 alloy-rice husk ash surface composites using friction stir processing. In: UNSPECIFIED.

Chitturi, V. and Pedapati, S.R. and Awang, M. (2019) Effect of tilt angle and pin depth on dissimilar friction stir lap welded joints of aluminum and steel alloys. Materials, 12 (23). ISSN 19961944

Challa, P. and Sahith, S.J.K. and Rao, K.V. and Pedapati, S.R. (2019) Hydraulic modeling for upstream gas production planning and allocation - Significance, challenges, and recommendations. In: UNSPECIFIED.

Patil, N.A. and Pedapati, S.R. and Mamat, O.B. and Syah Lubis, A.M.H. (2019) Optimization of friction stir process parameters for enhancement in surface properties of Al 7075-SiC/Gr hybrid surface composites. Coatings, 9 (12). ISSN 20796412

Paramaguru, D. and Pedapati, S.R. and Awang, M. (2019) A Review on Underwater Friction Stir Welding (UFSW). Lecture Notes in Mechanical Engineering. pp. 71-83. ISSN 21954356

Chitturi, V. and Pedapati, S.R. and Bin Awang, M. (2019) A Study on Research Advances in Dissimilar Friction Stir Welding. Nova Science Publishers, Inc., pp. 1-24. ISBN 9781536153859

Bin Matlan, M.J. and Mohebbi, H. and Pedapati, S.R. and Awang, M.B. and Che Ismail, M. and Kakooei, S. and Dan, N.E. (2018) Dissimilar Friction Stir Welding of Carbon Steel and Stainless Steel: Some Observation on Microstructural Evolution and Stress Corrosion Cracking Performance. Transactions of the Indian Institute of Metals, 71 (10). pp. 2553-2564. ISSN 09722815

Paramaguru, D. and Pedapati, S.R. and Awang, M. and Mohebbi, H. (2018) Mathematical model to predict tensile strength of underwater friction stir welded (UFSW) on 5052 aluminium alloys. In: UNSPECIFIED.

Paramaguru, D. and Pedapati, S.R. and Awang, M. (2018) Microstructural analysis on underwater friction stir welded 5052 aluminium alloy. In: UNSPECIFIED.

Pedapati, S.R. and Sidiq, A.B. and Awang, M. and Hashim, F.M. and Jebaraj, S. (2017) Effect of bevel angles on tensile strength of SS304 steel weld joints. Lecture Notes in Mechanical Engineering. pp. 95-106. ISSN 21954356

Pedapati, S.R. and Paramaguru, D. and Awang, M. (2017) Microhardness and microstructural studies on underwater Friction Stir Welding of 5052 Aluminum Alloy. In: UNSPECIFIED.

Pedapati, S.R. and Shasidaran and Kamal, S. and Rani, A.M.A. (2017) Optimum welding parameter for GMA welding using soft computing techniques. In: UNSPECIFIED.

Meyghani, B. and Awang, M.B. and Emamian, S.S. and Mohd Nor, M.K.B. and Pedapati, S.R. (2017) A comparison of different finite element methods in the thermal analysis of friction stir welding (FSW). Metals, 7 (10). ISSN 20754701

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. and Rao, T.V.V.L.N. and Pedapati, S.R. (2016) Application of nano aluminum in modified EDM: pmedm. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12117-12121. ISSN 18196608

Razak, M.A. and Abdul-Rani, A.M. and Rao, T.V.V.L.N. and Pedapati, S.R. and Kamal, S. (2016) Electrical Discharge Machining on Biodegradable AZ31 Magnesium Alloy Using Taguchi Method. In: UNSPECIFIED.