Article

Ayob, M.A. and Jiuh, S.H. and Othman, A.R. and Mohammad, M. (2024) Assessment of Heat Exchanger Tube Bundle Using STELLAR: Industrial Case Study. Lecture Notes in Mechanical Engineering. pp. 221-228. ISSN 21954356

Vorathin, E. and Khairuddin, R. and Maryam, S. and Mohammad, M. and Othman, A.R. and Ismail, A.R. (2024) Improved pressure sensitivity prediction of a rubber-based diaphragm FBG pressure sensor using theoretical model and finite element analysis. International Journal of Adhesion and Adhesives, 132.

Mohammad, M. and Othman, A.R. and Ismail, M.F. (2024) Influence of high temperature during tensile test for stainless steel using acoustic emission. Process Safety Progress, 43 (S1). S108-S115. ISSN 10668527

Vorathin, E. and Choong, M.X. and Mohammad, M. and Othman, A.R. and Ismail, A.R. (2024) Low pressure pipeline leak localization using highly sensitive rubber-based diaphragm FBG pressure sensors and NPW method. Optical Fiber Technology, 83.

Md Hanafiah, N.H. and Othman, A.R. and Ovinis, M. (2024) The Optimization of Vacuum-Bagging Processing in Oven Cure for Tensile Strength in Composite Laminate. Journal of Advanced Research in Applied Sciences and Engineering Technology, 37 (1). pp. 37-48.

Sohail, M. and Pao, W. and Othman, A.R. and Azam, H. and Khan, M.R. (2024) Regression-based prediction of flow-induced dominant vibrational frequencies in two-phase flow regimes. Ocean Engineering, 307.

Md Hanafiah, N.H. and Othman, A.R. and Ovinis, M. (2024) Significant Effect of Vacuum Bagging Processing on Inter-Laminar Shear Strength and Voids of Composite in Oven Cure. Journal of Advanced Research in Applied Sciences and Engineering Technology, 37 (1). pp. 69-81.

Shaik, N.B. and Pedapati, S.R. and Othman, A.R. and Dzubir, F.A.B.A. (2023) A Case Study to Predict Structural Health of a Gasoline Pipeline Using ANN and GPR Approaches. Lecture Notes in Mechanical Engineering. pp. 611-624. ISSN 21954356

Malek, A.M.A.-B. and Othman, A.R. and Othman, M.F. (2023) A Computational Technique for Low-Cycle Fatigue of LNG Mixing-Tee Weldment � An Industry Case Study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 104 (2). pp. 103-114.

Sattar, M. and Othman, A.R. and Muzamil, M. and Kamaruddin, S. and Akhtar, M. and Khan, R. (2023) Correlation Analysis of Established Creep Failure Models through Computational Modelling for SS-304 Material. Metals, 13 (2).

Al-Kayiem, H.H. and Othman, A.R. and Abed, A.B. and Tukkee, A.M. (2023) Experimental Evaluation of Drag Reduction in Pipe Flow Using Streamlined Turbulence Modifiers. Lecture Notes in Mechanical Engineering. pp. 237-248.

Alzakri Ekhwan, I. and Othman, A.R. and Franzen, A. and Othman, M.F. and Ishak, A. (2023) Leakage Quantification of Bolted Flange Joint Subjected to Different Bolt Sizes and External Load. Lecture Notes in Mechanical Engineering. pp. 741-752.

Sattar, M. and Othman, A.R. and Othman, M.F. and Ali, H.T. and Khan, M.K. (2023) New Creep Crack Growth Prediction Model for the Life Assessment of Stainless-Steel Material Using Computational Modeling. Metals, 13 (11).

Dzubir, F.A.A. and Othman, A.R. and Othman, M.F. (2023) Stress Classification Lines for Non-Standard Y-Tee Design in Piping System. Journal of Advanced Research in Applied Sciences and Engineering Technology, 33 (1). pp. 367-383.

Zulkifli, N.A. and Ismail, N.H. and Jaafar, M. and Othman, A.R. (2022) Effect of carbon nanotubes on the flexural properties and flammability of carbon fibre/epoxy multi-scale composites Auswirkung von Kohlenstoffnanoröhrchen auf die Biegeeigenschaften und die Entflammbarkeit von mehrskaligen Kohlenstofffaser/Epoxid-Verbundwerkstoffen. Materialwissenschaft und Werkstofftechnik, 53 (12). pp. 1544-1550. ISSN 09335137

Hanafiah, N.H.M. and Othman, A.R. (2022) Effect of processing parameter on void content of glass fibre composite laminate Einfluss der Herstellungsparameter auf den Hohlraumgehalt von Glasfaserlaminaten. Materialwissenschaft und Werkstofftechnik, 53 (3). pp. 308-315. ISSN 09335137

Sattar, M. and Othman, A.R. and Kamaruddin, S. and Akhtar, M. and Khan, R. (2022) Limitations on the computational analysis of creep failure models: A review. Engineering Failure Analysis, 134. ISSN 13506307

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ud Din, I. and Othman, A.R. and Sharp, K. and Gerard, P. (2021) Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering, 207. ISSN 13598368

Sattar, M. and Othman, A.R. and Kamaruddin, S. and Alam, M.A. and Azeem, M. (2021) Creep parameters determination by omega model to norton bailey law by regression analysis for austenitic steel ss-304. Solid State Phenomena, 324 SS. pp. 188-197. ISSN 10120394

Sattar, M. and Othman, A.R. and Akhtar, M. and Kamaruddin, S. and Khan, R. and Masood, F. and Alam, M.A. and Azeem, M. and Mohsin, S. (2021) Curve fitting for damage evolution through regression analysis for the kachanov�rabotnov model to the norton�bailey creep law of ss-316 material. Materials, 14 (19). ISSN 19961944

Akhtar, M.N. and Khan, M. and Khan, S.A. and Afzal, A. and Subbiah, R. and Ahmad, S.N. and Husain, M. and Butt, M.M. and Othman, A.R. and Bakar, E.A. (2021) Determination of non-recrystallization temperature for niobium microalloyed steel. Materials, 14 (10). ISSN 19961944

Akhtar, M.N. and Shaikh, A.J. and Khan, A. and Awais, H. and Bakar, E.A. and Othman, A.R. (2021) Smart sensing with edge computing in precision agriculture for soil assessment and heavy metal monitoring: A review. Agriculture (Switzerland), 11 (6). ISSN 20770472

Zainudin, A.S. and Othman, A.R. (2021) Thermal Stability of PALF-PP and PALF-PLA for Natural Fiber Honeycomb Core Materials. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 87 (1). pp. 20-29. ISSN 22897879

Shaik, N.B. and Pedapati, S.R. and Othman, A.R. and Bingi, K. and Dzubir, F.A.A. (2021) An intelligent model to predict the life condition of crude oil pipelines using artificial neural networks. Neural Computing and Applications, 33 (21). pp. 14771-14792. ISSN 09410643

Umar, S.N.H. and Akhtar, M.N. and Bakar, E.A. and Kamaruddin, N.M. and Othman, A.R. (2020) Development of heavy metal potentiostat for batik industry. Applied Sciences (Switzerland), 10 (21). pp. 1-12. ISSN 20763417

Akhtar, M.N. and Ahmed, W. and Kakar, M.R. and Bakar, E.A. and Othman, A.R. and Bueno, M. (2020) Implementation of Parallel K-Means Algorithm to Estimate Adhesion Failure in Warm Mix Asphalt. Advances in Civil Engineering, 2020. ISSN 16878086

Shaik, N.B. and Pedapati, S.R. and Ammar Taqvi, S.A. and Othman, A.R. and Abd Dzubir, F.A. (2020) A feed-forward back propagation neural network approach to predict the life condition of crude oil pipeline. Processes, 8 (6). ISSN 22279717

Zakaria, Z.A. and Mohd Jasri, M.A.H. and Yaacob, A. and Hasan, K.N.M. and Othman, A.R. (2019) Effect of Bevel Angle and Welding Current on T-Joint Using Gas Metal Arc Welding (GMAW). Lecture Notes in Mechanical Engineering. pp. 49-57. ISSN 21954356

Adam, I.K. and Heikal, M.R. and Aziz, A.R.A. and Othman, A.R. and Yusup, S. (2018) Combustion performance of rubber seed methyl ester using aromatic and phenolic antioxidants in a multi-cylinder diesel engine. Clean Technologies and Environmental Policy, 20 (10). pp. 2239-2253. ISSN 1618954X

Mustapa, M.A. and Othman, W.A.F.W. and Abu Bakar, E. and Othman, A.R. (2018) Development of pole-like tree spiral climbing robot. Lecture Notes in Mechanical Engineering (978981). pp. 285-293. ISSN 21954356

Othman, A.R. and Hassan, M.H. and Abu Bakar, E. and Othman, W.A.F.W. (2018) Statistical analysis of the machining parameters in drilling of carbon fibre reinforced plastics (CFRP) composite with various drill types. Lecture Notes in Mechanical Engineering (978981). pp. 141-154. ISSN 21954356

Abu Bakar, E. and Othman, W.A.F.W. and Othman, A.R. (2018) Systematic approach for uncertainty delta E data for composites panel coating analysis. Lecture Notes in Mechanical Engineering (978981). pp. 131-140. ISSN 21954356

Hassan, M.H. and Othman, A.R. (2017) Contribution of processing parameters on void content in the vacuum bagging configurations of L-shaped composite laminates. International Journal of Advanced Manufacturing Technology, 93 (1-4). pp. 1333-1345. ISSN 02683768

Zakaria, Z.A. and Hasan, K.N.M. and Razak, M.F.A. and Yaacob, A. and Othman, A.R. (2017) Experimental study on tensile strength of butt joints for mild steel with thickness 6mm using Gas Metal Arc Welding (GMAW). Key Engineering Materials, 740 KE. pp. 155-160. ISSN 10139826

Othman, A.R. and Jadee, K.J. and Ismadi, M.-Z. (2017) Mitigating stress concentration through defense hole system for improvement in bearing strength of composite bolted joint, Part 1: Numerical analysis. Journal of Composite Materials, 51 (26). pp. 3685-3699. ISSN 00219983

Hassan, M.H. and Othman, A.R. and Kamaruddin, S. (2017) A review on the manufacturing defects of complex-shaped laminate in aircraft composite structures. International Journal of Advanced Manufacturing Technology, 91 (9-12). pp. 4081-4094. ISSN 02683768

Hassan, M.H. and Othman, A.R. and Kamaruddin, S. (2017) The use of response surface methodology (RSM) to optimize the acid digestion parameters in fiber volume fraction test of aircraft composite structures. International Journal of Advanced Manufacturing Technology, 90 (9-12). pp. 3739-3748. ISSN 02683768

Othman, A.R. and Jadee, K.J. (2016) Specific bearing strength of bolted composite joint with different glass fiber reinforcement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12039-12044. ISSN 18196608

Mahmod, M.F. and Bakar, E.A. and Othman, A.R. and Ramzi, A.R. and Goh, C.Y. (2015) Fiber glass composite laminates (FGCL) measurement using 3 axis pulse echo scanning unit. Jurnal Teknologi, 76 (1). pp. 147-155. ISSN 01279696

Conference or Workshop Item

Muhaimin Ishak, M.I. and Lemma, T.A. and Muhammad Daud, M.H. and Fatimi, N.M. and Rahman, A.R.A. and Rahman, A.A. and Othman, A.R. (2022) IGUSA: Prediction of Ultimate Strength of Fixed Offshore Structures in Malaysian Waters Using Machine Learning Techniques. In: UNSPECIFIED.

Othman, A.R. and Hussin, H. and Mustapha, M. and Parman, S. (2018) Cross-Disciplinary Team Learning in Engineering Project-Based: Challenges in Collaborative Learning. In: UNSPECIFIED.

Sukeri, M. and Paiz Ismadi, M.Z. and Othman, A.R. and Kamaruddin, S. (2018) Wear Detection of Drill Bit by Image-based Technique. In: UNSPECIFIED.

Mahmod, M.F. and Bakar, E.A. and Othman, A.R. (2016) Defect Detection of Fiberglass Composite Laminates (FGCL) with Ultrasonic A-Scan Signal Measurement. In: UNSPECIFIED.