Article

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2024) Feasibility Evaluation of Waste Palm Oil Clinker Powder as a Fillers Substitute for Eco-Friendly Hot Mix Asphalt Pavement. International Journal of Pavement Research and Technology, 17 (2). pp. 446-459.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2024) Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures. International Journal of Pavement Research and Technology, 17 (1). pp. 123-150. ISSN 19966814

Talpur, M.A.H. and Khahro, S.H. and Ali, T.H. and Waseem, H.B. and Napiah, M. (2023) Computing travel impendences using trip generation regression model: a phenomenon of travel decision-making process of rural households. Environment, Development and Sustainability, 25 (7). pp. 5973-5996.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Jagaba, A.H. and Al-Sabaeei, A.M. (2023) Modeling and optimization of asphalt content, waste palm oil clinker powder and waste rice straw ash for sustainable asphalt paving employing response surface methodology: A pilot study. Cleaner Materials, 8.

Aliyu Yaro, N.S. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Muhammad, A. and Jagaba, A.H. (2023) Modeling and optimization of rheological properties and aging resistance of asphalt binder incorporating palm oil mill waste using response surface methodology. Journal of Infrastructure Intelligence and Resilience, 2 (1).

Al-Sabaeei, A.M. and Alhussian, H. and Abdulkadir, S.J. and Giustozzi, F. and Napiah, M. and Jagadeesh, A. and Sutanto, M. and Memon, A.M. (2023) Utilization of response surface methodology and machine learning for predicting and optimizing mixing and compaction temperatures of bio-modified asphalt. Case Studies in Construction Materials, 18.

Al-Sabaeei, A.M. and Safaeldeen, G.I. and Napiah, M. (2023) Utilization of response surface methodology for predicting and optimizing the physical properties of rubberized asphalt modified with nanosilica and waste denim fiber. Cleaner Engineering and Technology, 15.

Rafindadi, A.D. and Napiah, M. and Othman, I. and Miki�, M. and Haruna, A. and Alarifi, H. and Al-Ashmori, Y.Y. (2022) Analysis of the causes and preventive measures of fatal fall-related accidents in the construction industry. Ain Shams Engineering Journal, 13 (4). ISSN 20904479

Al-Sabaeei, A. and Napiah, M. and Sutanto, M. and Habib, N.Z. and Bala, N. and Kumalasari, I. and Ghaleb, A. (2022) Application of nano silica particles to improve high-temperature rheological performance of tyre pyrolysis oil-modified bitumen. Road Materials and Pavement Design, 23 (9). pp. 1999-2017. ISSN 14680629

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Muhammad, A. (2022) Comparison of Response Surface Methodology and Artificial Neural Network approach in predicting the performance and properties of palm oil clinker fine modified asphalt mixtures. Construction and Building Materials, 324. ISSN 09500618

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Mizwar, I.K. and Umar, A.M. (2022) Engineering Properties of Palm Oil Clinker Fine-Modified Asphaltic Concrete Mixtures. Journal of Engineering and Technological Sciences, 54 (2). ISSN 23375779

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Feasibility Evaluation of Waste Palm Oil Clinker Powder as a Fillers Substitute for Eco-Friendly Hot Mix Asphalt Pavement. International Journal of Pavement Research and Technology. ISSN 19966814

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures. International Journal of Pavement Research and Technology. ISSN 19966814

Memon, I.A. and Soomro, U. and Qureshi, S. and Chandio, I.A. and Talpur, M.A.H. and Napiah, M. (2022) Multilayer Perceptron Modelling of Travelers Towards Park-and-Ride Service in Karachi. Sustainable Civil Infrastructures. pp. 1026-1038. ISSN 23663405

Darda'u Rafindadi, A. and Napiah, M. and Othman, I. and Alarifi, H. and Musa, U. and Muhammad, M. (2022) Significant factors that influence the use and non-use of personal protective equipment (PPE) on construction sites�Supervisors' perspective. Ain Shams Engineering Journal, 13 (3). ISSN 20904479

Memon, I.A. and Sahito, N. and Kalwar, S. and Hwang, J. and Napiah, M. and Zaly Shah, M. (2021) Choice modelling of a car traveler towards park-and-ride services in putrajaya to create green development. Sustainability (Switzerland), 13 (14). ISSN 20711050

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Yaro, N.S.A. and Khan, M.I. (2021) Comparison of performance properties and prediction of regular and gamma-irradiated granular waste polyethylene terephthalate modified asphalt mixtures. Polymers, 13 (16). ISSN 20734360

Othman, I. and Darda�U Rafindadi, A. and Napiah, M. and Miki�, M. and Ahmad, H. and Aliyuyaro, N.S. and Isah, B.W. and Kineber, A.F. and Buniya, M.K. (2021) Development of framework for bim-based tools to minimize the causes of accidents in construction. Lecture Notes in Civil Engineering, 132. pp. 608-619. ISSN 23662557

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. (2021) Effect of phase change material on rheological properties of asphalt mastic. Lecture Notes in Civil Engineering, 132. pp. 836-843. ISSN 23662557

Memon, A.M. and Sutanto, M.H. and Napiah, M. and Wong, F. and Bujang, M. (2021) Effects of bitumen modification on pavement performance subjected to high vehicular speed and extreme temperature conditions: A review. Lecture Notes in Civil Engineering, 132. pp. 1044-1051. ISSN 23662557

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Abdulrahman, S. and Saeed, S.M. (2021) Irradiated polyethylene terephthalate fiber and binder contents optimization for fiber-reinforced asphalt mix using response surface methodology. Ain Shams Engineering Journal, 12 (1). pp. 271-282. ISSN 20904479

Rafiq, W. and Musarat, M.A. and Altaf, M. and Napiah, M. and Sutanto, M.H. and Alaloul, W.S. and Javed, M.F. and Mosavi, A. (2021) Life cycle cost analysis comparison of hot mix asphalt and reclaimed asphalt pavement: A case study. Sustainability (Switzerland), 13 (8). ISSN 20711050

Memon, I.A. and Kalwar, S. and Sahito, N. and Talpur, M.A.H. and Chandio, I.A. and Napiah, M. and Tayyeb, H. (2021) Mode choice modeling to shift car travelers towards park and ride service in the city centre of karachi. Sustainability (Switzerland), 13 (10). ISSN 20711050

Rafiq, W. and Napiah, M. and Habib, N.Z. and Sutanto, M.H. and Alaloul, W.S. and Khan, M.I. and Musarat, M.A. and Memon, A.M. (2021) Modeling and design optimization of reclaimed asphalt pavement containing crude palm oil using response surface methodology. Construction and Building Materials, 291. ISSN 09500618

Saeed, S.M. and Sutanto, M.H. and Napiah, M. and Usman, A. and Batari, A. and Aman, M.Y. and Aliyu Yaro, N.S. (2021) Optimization of rubber seed oil content as bio-oil rejuvenator and total water content for cold recycled asphalt mixtures using response surface methodology. Case Studies in Construction Materials, 15. ISSN 22145095

Al-Sabaeei, A.M. and Napiah, M. and Sutanto, M. and Alaloul, W. and Md Yusoff, N.I. and Imran Khan, M. and Modibbo Saeed, S. (2021) Physicochemical, rheological and microstructural properties of Nano-Silica modified Bio-Asphalt. Construction and Building Materials, 297. ISSN 09500618

Memon, A.M. and Sutanto, M.H. and Napiah, M. and Yusoff, N.I.M. and Memon, R.A. and Al-Sabaeei, A.M. and Ali, M. (2021) Physicochemical, rheological and morphological properties of bitumen incorporating petroleum sludge. Construction and Building Materials, 297. ISSN 09500618

Saeed, S.M. and Sutanto, M.H. and Napiah, M. and Wong, F. and Bujang, M. (2021) Review on the effect of curing on cold recycled asphalt mixture. Lecture Notes in Civil Engineering, 132. pp. 1052-1060. ISSN 23662557

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. and Habib, N.Z. and Thanapal, P. and Qin, Y. (2021) Rutting Prevention of Bituminous Mastic Using Microencapsulation Phase Change Material. Journal of Materials in Civil Engineering, 33 (12). ISSN 08991561

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Hainin, M.R. and Usman, A. and Rafindadi, A.D. and Abdulrahman, S. and Saeed, S.M. (2021) Utilization of Palm Oil Mill Residue as Sustainable Pavement Materials: A Review. International Journal of Integrated Engineering, 13 (3). pp. 66-78. ISSN 2229838X

Idris, M.M. and Napiah, M. and Matori, M.Y. and Ahmad, N. (2020) Fatigue and Long-Term Deformation Performance of Conventional and Rubber-Modified Bitumen. Lecture Notes in Civil Engineering, 59. pp. 79-85. ISSN 23662557

Bala, N. and Napiah, M. (2020) Fatigue life and rutting performance modelling of nanosilica/polymer composite modified asphalt mixtures using Weibull distribution. International Journal of Pavement Engineering, 21 (4). pp. 497-506. ISSN 10298436

Memon, A.M. and Hartadi Sutanto, M. and Napiah, M. and Khan, M.I. and Rafiq, W. (2020) Modeling and optimization of mixing conditions for petroleum sludge modified bitumen using response surface methodology. Construction and Building Materials, 264. ISSN 09500618

Bala, N. and Napiah, M. and Kamaruddin, I. (2020) Nanosilica composite asphalt mixtures performance-based design and optimisation using response surface methodology. International Journal of Pavement Engineering, 21 (1). pp. 29-40. ISSN 10298436

Hasan, R. and Oviedo-Trespalacios, O. and Napiah, M. (2020) An intercept study of footbridge users and non-users in Malaysia. Transportation Research Part F: Traffic Psychology and Behaviour, 73. pp. 66-79. ISSN 13698478

Zahidy, A.A. and Sutanto, M.H. and Napiah, M. and Hamid, Z.A. (2019) Measuring the relationships of road service quality and road traffic accidents. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 719-725. ISSN 22783075

Bala, N. and Kamaruddin, I. and Napiah, M. and Sutanto, M.H. (2019) Polymer Nanocomposite-Modified Asphalt: Characterisation and Optimisation Using Response Surface Methodology. Arabian Journal for Science and Engineering, 44 (5). pp. 4233-4243. ISSN 2193567X

Al-Sabaeei, A. and Md. Yussof, N.I. and Napiah, M. and Sutanto, M. (2019) A review of using natural rubber in the modification of bitumen and asphalt mixtures used for road construction. Jurnal Teknologi, 81 (6). pp. 81-88. ISSN 01279696

Bala, N. and Napiah, M. and Kamaruddin, I. (2018) APPLICATION OF MULTIVARIABLE REGRESSION MODELS FOR PREDICTION OF COMPOSITE NANOSILICA/POLYMER ASPHALT MIXTURE OBC. International Journal of GEOMATE, 14 (45). pp. 202-209. ISSN 21862982

Al Qudah, A. and Abdul Rahim, M. and Ghazaly, M.Z. and Mashaan, N.S. and Koting, S. and Napiah, M. and Wan Omar, W.M.S. and Issa, Y. (2018) Effect of aged crumb rubber bitumen on performance dense graded mix in Malaysia. International Journal of Civil Engineering and Technology, 9 (4). pp. 1356-1369. ISSN 09766308

Bala, N. and Napiah, M. and Kamaruddin, I. (2018) Effect of nanosilica particles on polypropylene polymer modified asphalt mixture performance. Case Studies in Construction Materials, 8. pp. 447-454. ISSN 22145095

Al-Sabaeei, A. and Muniandy, R. and Hassim, S. and Napiah, M. (2018) Effect of tire crumb rubber (tcr) on the gyratory compaction of stone mastic asphalt. International Journal of Civil Engineering and Technology, 9 (9). pp. 1138-1150. ISSN 09766308

Bala, N. and Napiah, M. and Kamaruddin, I. (2018) Influence of nanosilica on moisture resistance of polymer modified bitumens. Petroleum Science and Technology, 36 (3). pp. 244-250. ISSN 10916466

Bala, N. and Kamaruddin, I. and Napiah, M. and Danlami, N. (2018) Polyethylene polymer modified bitumen: Process optimization and modeling of linear viscoelastic rheological properties using response surface methodology. Journal of Engineering and Applied Sciences, 13 (9). pp. 2818-2827. ISSN 1816949X

Al-Sabaeei, A. and Napiah, M. and Sutanto, M. and Alaloul, W. (2018) An overview on using the waste denim fiber as a bitumen modifier for sustainable road construction. International Journal of Civil Engineering and Technology, 9 (13). pp. 1194-1200. ISSN 09766308

Hasan, R. and Napiah, M. (2018) The perception of Malaysian pedestrians toward the use of footbridges. Traffic Injury Prevention, 19 (3). pp. 292-297. ISSN 15389588

Kumalasari, I. and Napiah, M. and Sutanto, M.H. (2018) A review on phase change materials incorporation in asphalt pavement. Indonesian Journal of Science and Technology, 3 (2). pp. 171-179. ISSN 25281410

Bala, N. and Napiah, M. and Kamaruddin, I. (2017) Application of Response Surface Methodology for mix design optimization of nanocomposite modified asphalt mixtures. International Journal of GEOMATE, 13 (39). pp. 237-244. ISSN 21862982

Danlami, N. and Napiah, M. and Sadullah, A.F.M. and Bala, N. (2017) Exploring tangent-to-curve speed dynamics on two-lane roads in northern Nigeria. International Journal of Civil Engineering and Technology, 8 (11). pp. 466-473. ISSN 09766308

Hasan, R. and Napiah, M. (2017) Pedestrians� behavior towards the use of footbridges under the impact of motivational alerting posters: The case of Ipoh city, Malaysia. Advances in Transportation Studies, 42. pp. 117-128. ISSN 18245463

Bala, N. and Napiah, M. and Kamaruddin, I. (2017) Performance evaluation of composite asphalt mixture modified with polyethylene and nanosilica. International Journal of Civil Engineering and Technology, 8 (9). pp. 616-628. ISSN 09766308

Hasan, R. and Napiah, M. (2017) Utilization of footbridges: Influential factors and improvement proposals. Advances in Transportation Studies, 43. pp. 43-60. ISSN 18245463

Bala, N. and Kamaruddin, I. and Napiah, M. (2017) The influence of polymer on rheological and thermo oxidative aging properties of modified bitumen binders. Jurnal Teknologi, 79 (6). pp. 61-73. ISSN 01279696

Danlami, N. and Napiah, M. and Sadullah, A.F.M. and Bala, N. (2017) An overview and prediction of Malaysian road fatality: Approach using generalized estimating equations. International Journal of Civil Engineering and Technology, 8 (11). pp. 452-465. ISSN 09766308

Memon, I.A. and Napiah, M. and Talpur, M.A.H. and Hakro, M.R. (2016) Mode choice modelling method to shift car travelers towards park and ride service. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3677-3683. ISSN 18196608

Johnson, O.A. and Napiah, M. and Kamaruddin, I. (2014) Potential uses of waste sludge in construction industry: A review. Research Journal of Applied Sciences, Engineering and Technology, 8 (4). pp. 565-570. ISSN 20407459

Othman, I. and Napiah, M. and Potty, N.S. (2014) Resource management in construction project. Applied Mechanics and Materials, 567. pp. 607-612. ISSN 16609336

Talpur, M.A.H. and Napiah, M. and Chandio, I.A. and Qureshi, T.A. (2014) An analysis of Umer Kots' public sector education facilities: A deserted subregion in Southern Pakistan. Research Journal of Applied Sciences, Engineering and Technology, 7 (9). pp. 1856-1862. ISSN 20407459

Talpur, M.A.H. and Napiah, M. and Chandio, I.A. and Qureshi, T.A. (2014) A comprehensive evaluation of basic health facilities according to local standards and demographic features of umarkot sub-region, Pakistan. Research Journal of Applied Sciences, Engineering and Technology, 7 (22). pp. 4754-4762. ISSN 20407459

Abbas, M.K. and Karsiti, M.N. and Napiah, M. and Brahim, S. (2013) Integrated self-organized traffic light controllers for signalized intersections. International Review of Automatic Control, 6 (4). pp. 481-488. ISSN 19746059

Kamaruddin, I. and Habib, N.Z. and Tan, I.M. and Komiyama, M. and Napiah, M. (2012) Effect of polymer dispersion on the Rheology and morphology of polymer modified bituminous blend. RILEM Bookseries, 4. pp. 859-868. ISSN 22110844

Othman, I. and Idrus, A. and Napiah, M. (2012) Human resource management in the construction of a sustainable development project: Towards successful completion. WIT Transactions on Ecology and the Environment, 162. pp. 169-180. ISSN 17433541

Talpur, M.A.H. and Napiah, M. and Chandio, I.A. and Khahro, S.H. (2012) Transportation planning survey methodologies for the proposed study of physical and socio-economic development of deprived rural regions: A review. Modern Applied Science, 6 (7). pp. 1-16. ISSN 19131844

Suliman, Y. and Napiah, M. and Kamaruddin, I. (2011) Effect of fine aggregate physical properties on the engineering properties of conventional and polymer-modified bituminous mixtures. Transportation Research Record (2205). pp. 20-27. ISSN 03611981

Habib, N.Z. and Kamaruddin, I. and Napiah, M. and Mohd Tan, I. (2010) Rheological properties of polyethylene and polypropylene modified bitumen. World Academy of Science, Engineering and Technology, 72. pp. 293-297. ISSN 2010376X

Utomo, C. and Idrus, A. and Napiah, M. and Khamidi, M.F. (2009) Agreement options on multi criteria group decision and negotiation. World Academy of Science, Engineering and Technology, 38. pp. 447-451. ISSN 2010376X

Conference or Workshop Item

Rafiq, W. and Napiah, M. and Sutanto, M.H. and Alaloul, W.S. (2024) Crude Palm Oil Effect on Aged Binder Morphological Characteristics. In: UNSPECIFIED.

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Yaro, N.S.A. (2022) Evaluation of optimum asphalt content and engineering properties of asphalt mixture containing irradiated waste plastic bottles granules as aggregates. In: UNSPECIFIED.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Jagaba, A.H. and Mani, A.U. and Ahmad, A. (2022) Geopolymer utilization in the pavement industry - An overview. In: UNSPECIFIED.

Al-Sabaeei, A.M. and Napiah, M. and Al Salaheen, M. and Badri, R.M. and Noura, S. and Khan, M.I. and Al-Bahr, T.M. and Alzubi, K. (2022) Optimizing the Physical Properties of Waste Denim Fiber-Modified Rubberized Bitumen Through Response Surface Methodology. In: UNSPECIFIED.

Usman, A. and Sutanto, M.H. and Napiah, M. and Al-Sabaeei, A.M. and Yaro, N.S.A. and Kumalasari, I. and Saeed, S.M. (2022) Waste Polyethylene Terephthalate granules modified by gamma irradiation and their effect as fine aggregates on moisture damage of asphalt mixtures. In: UNSPECIFIED.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Rafindadi, A.D. and Saeed, S.M. and Abdulrahman, S. (2021) Evaluation of the Impact of Short-Term Aging on Volumetric and Marshall Properties of Palm Oil Clinker Fine Modified Asphalt Concrete (POCF-MAC). In: UNSPECIFIED.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Saeed, S.M. and Kaura, J.M. (2021) Influence of modification mixing parameters on conventional properties of palm oil clinker fine (POCF)-modified bitumen. In: UNSPECIFIED.

Rafindadi, A.D. and Napiah, M. and Othman, I. and Miki�, M. and Mohammed, M. and Haruna, A. and Dalha, I.B. and Ibrahim, M.B. (2021) Multi-Criteria comparison of the primary factors of chemical exposure in construction projects. In: UNSPECIFIED.

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Khan, M.I. and Ibrahim, M.B. (2020) Application of gamma irradiation on Polyethylene Terephthalate (PET) for use in asphaltic concrete mixtures as aggregates replacement. In: UNSPECIFIED.

Al-Sabaeei, A.M. and Napiah, M. and Sutanto, M. and Alaloul, W. and Yusoff, N.I.M. and Ghaleb, A.A.S. (2020) Prediction of Rheological Properties of Bio-asphalt Binders Through Response Surface Methodology. In: UNSPECIFIED.

Al-Sabaeei, A. and Napiah, M. and Sutanto, M. and Alaloul, W. (2019) Effects of Waste Denim Fibre (WDF) on the physical and rheological properties of bitumen. In: UNSPECIFIED.

Yahya Al-Ashmori, Y. and Bin Othman, I. and Bin Mohamad, H. and Rahmawati, Y. and Napiah, M. (2019) Establishing the Level of BIM implementation - A Case Study in Melaka, Malaysia. In: UNSPECIFIED.

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. (2019) Thermal properties of cool asphalt concrete containing phase change material. In: UNSPECIFIED.

Othman, I. and Harahap, M.I.P. and Mohamad, H. and Shafiq, N. and Napiah, M. (2018) Development of BIM-Based Safety Management Model Focusing on Safety Rule Violations. In: UNSPECIFIED.

Usman, A. and Sutanto, M.H. and Napiah, M. (2018) Effect of Recycled Plastic in Mortar and Concrete and the Application of Gamma Irradiation-A Review. In: UNSPECIFIED.

Adebayo, J.O. and Napiah, M. and Ibrahim, K. and Raduan Kabit, M. (2018) Evaluation of Waste Cooking Oil as Sustainable Binder for Building Blocks. In: UNSPECIFIED.

Othman, I. and Hashim, Z. and Mohamad, H. and Napiah, M. (2018) The Framework for Effective Human Resource Management at Construction Site. In: UNSPECIFIED.

Othman, I. and Azlam, M.H. and Mohamad, H. and Shafiq, N. and Napiah, M. (2018) Identification of Good China Steel Manufacturer for Industry. In: UNSPECIFIED.

Bala, N. and Napiah, M. and Kamaruddin, I. and Danlami, N. (2018) Optimization of Nanocomposite Modified Asphalt Mixtures Fatigue Life using Response Surface Methodology. In: UNSPECIFIED.

Othman, I. and Majid, R. and Mohamad, H. and Shafiq, N. and Napiah, M. (2018) Variety of Accident Causes in Construction Industry. In: UNSPECIFIED.

Bala, N. and Kamaruddin, I. and Napiah, M. and Danlami, N. (2017) Rheological and rutting evaluation of composite nanosilica/polyethylene modified bitumen. In: UNSPECIFIED.

Othman, I. and Napiah, M. and Nuruddin, M.F. and Klufallah, M.M.A. (2016) Effectiveness of preventive safety management in construction. In: UNSPECIFIED.

Kamaruddin, I. and Napiah, M. and Nahi, M.H. (2016) The Influence of Moisture on the Performance of Polymer Fibre-Reinforced Asphalt Mixture. In: UNSPECIFIED.

Memon, I.A. and Napiah, M. and Hussain, M.A. and Hakro, M.R. (2016) Influence of factors to shift private transport users to park-and-ride service in Putrajaya. In: UNSPECIFIED.

Nahi, M.H. and Kamaruddin, I. and Napiah, M. (2016) Rutting Prediction in Asphalt Pavement Based on Viscoelastic Theory. In: UNSPECIFIED.

Hasan, R. and Napiah, M. (2016) Statistical interpretations about the use of footbridges by diverse groups of pedestrians in Malaysia. In: UNSPECIFIED.

Kamaruddin, I. and Napiah, M. and Nahi, M.H. (2016) The effect of water on the performance of polymer fibre-reinforced road bituminous mixtures. In: UNSPECIFIED.

Talpur, M.A.H. and Napiah, M. and Chandio, I.A. and Qureshi, T.A. and Khahro, S.H. (2014) Development of a regional transport policy support system for rural planning agencies in developing world. In: UNSPECIFIED.

Kamaruddin, I. and Darmawan and Napiah, M. (2012) Effect of cement coated aggregates on the creep and deformation characteristics of asphaltic concrete bituminous mixtures. In: UNSPECIFIED.

Abbas, M.K. and Karsiti, M.N. and Napiah, M. and Samir, B.B. (2011) Dynamic traffic-light phase plan protocol (DT3P). In: UNSPECIFIED.

Othman, I. and Idrus, A. and Napiah, M. (2011) Effectiveness of Human Resource Management in Construction project. In: UNSPECIFIED.

Yaakub, N. and Napiah, M. (2011) Public bus passenger demographic and travel characteristics a study of public bus passenger profile in Kota Bharu, Kelantan. In: UNSPECIFIED.

Napiah, M. and Kamaruddin, I. and Suwardo (2011) Punctuality index and expected average waiting time of stage buses in mixed traffic. In: UNSPECIFIED.

Abbas, M.K. and Karsiti, M.N. and Napiah, M. and Samir, B.B. (2011) Traffic light control using VANET system architecture. In: UNSPECIFIED.

Abbas, M.K. and Karsiti, M.N. and Napiah, M. and Samir, B.B. (2011) Traffic light control via VANET system architecture. In: UNSPECIFIED.

Habib, N.Z. and Kamaruddin, I. and Tan, I.M. and Napiah, M. (2011) The application of modern analytical techniques to study rheology and morphology of polymer modified bitumen. In: UNSPECIFIED.

Kamaruddin, I. and Soelistijo, A. and Napiah, M. (2010) A comparison of the engineering properties of gap-graded and well-graded road bituminous mixtures. In: UNSPECIFIED.

Utomo, C. and Idrus, A. and Napiah, M. and Khamidi, M.F. (2009) Aggregation and coalition formation on value-based decision. In: UNSPECIFIED.

Utomo, C. and Idrus, A. and Napiah, M. (2009) Methodology for multi criteria group decision and negotiation support on value-based decision. In: UNSPECIFIED.

Kamaruddin, I. and Napiah, M. (2007) The properties and performance of polymer fibre reinforced bituminous mixtures. In: UNSPECIFIED.

Napiah, M. and Kamaruddin, I. (2003) Creep and fatigue performance of polymer modified and fibre reinforced bituminous mixtures. In: UNSPECIFIED.