Article

Lah, N.F.C. and Yusoff, P.S.M.M. and Yogaraj, J.R. and Mustapha, M. and Delan, E.H. and Yee, J.F.F. (2024) Corrosion Study of Carbon Steel in High-Acidic Environment: H2S and CO2�H2S Comparison. Lecture Notes in Mechanical Engineering. pp. 299-307. ISSN 21954356

Mustapha, A. and Abdul-Rani, A.M. and Saad, N. and Mustapha, M. (2024) Ergonomic principles of road signs comprehension: A literature review. Transportation Research Part F: Traffic Psychology and Behaviour, 101. pp. 279-305.

Liaw, K.L. and Kurnia, J.C. and Sallih, N. and Mustapha, M. and Sasmito, A.P. (2024) Heat transfer analysis of subcooled flow boiling in copper foam helical coiled heat exchanger � A pore-scale numerical study. International Communications in Heat and Mass Transfer, 155. ISSN 07351933

Ma, Y. and Mustapha, F. and Ishak, M.R. and Abdul Rahim, S. and Mustapha, M. (2024) Structural fault diagnosis of UAV based on convolutional neural network and data processing technology. Nondestructive Testing and Evaluation, 39 (2). pp. 426-445. ISSN 10589759

Abdullah, M.N. and Mustapha, F. and Mustapha, M. and Khan, T. and Sebaey, T.A. (2024) Study on Adhesive and Microstructure Properties of Rice Husk Ash-Based Geopolymer Hybrid Alkyd Coating. Journal of Natural Fibers, 21 (1).

Alam, M.A. and Ya, H.B. and Azeem, M. and Mustapha, M. and Yusuf, M. and Masood, F. and Marode, R.V. and Sapuan, S.M. and Ansari, A.H. (2023) Advancements in aluminum matrix composites reinforced with carbides and graphene: A comprehensive review. Nanotechnology Reviews, 12 (1).

Nazri, N.S. and Fudholi, A. and Solomin, E. and Arifin, M. and Yazdi, M.H. and Suyono, T. and Priandana, E.R. and Mustapha, M. and Hamsan, M.H. and Hussain, A.H. and Khaidzir, M.F.S. and Ali Zaini, M.I. and Rosli, N.N. and Mohammad, M. and Sopian, K. (2023) Analytical and experimental study of hybrid photovoltaic�thermal�thermoelectric systems in sustainable energy generation. Case Studies in Thermal Engineering, 51.

Zakaria, M.S. and Mustapha, M. and Azmi, A.I. and Khor, C.Y. (2023) Chip Morphology and Surface Integrity in Turning AZ31 Magnesium Alloy under Dry Machining and Submerged Convective Cooling. Metals, 13 (3).

Jayabalan, L. and Mustapha, M. and Mokhtar, A.A. (2023) DISCRETE EVENT SIMULATION MODELLING AS AN IMPROVEMENT VALIDATION TOOL ON PRINTED CIRCUIT BOARD MECHANICAL ASSEMBLY PROCESS. ARPN Journal of Engineering and Applied Sciences, 18 (9). pp. 1078-1088. ISSN 18196608

Jaafar, M.F. and Mustapha, F. and Mustapha, M. (2023) Dynamic Compression Simulation of Magnetorheological Elastomer Using Bouc-Wen Hysteretic Model. Materials Science Forum, 1093. pp. 37-43.

Alam, M.A. and Ya, H.H. and Qistina, N.A. and Azeem, M. and Mustapha, M. and Yusuf, M. and Masood, F. and Khan, R. and Ahmad, T. (2023) Investigating the Microhardness Behavior of Al6061/TiC Surface Composites Produced by Friction Stir Processing. International Journal of Computational Methods and Experimental Measurements, 11 (3). pp. 157-161.

Amin Abd Majid, M. and Cyril Hampo, C. and Bt Akmar, A. and Haji Ya, H. and Mustapha, M. (2023) Life Cycle Assessment and Economic Analysis of a Vapor Compression System Integrated with a Large District Cooling Plant. Lecture Notes in Mechanical Engineering. pp. 427-437.

Ma, Y. and Mustapha, F. and Ishak, M.R. and Abdul Rahim, S. and Mustapha, M. (2023) Machine learning methods for multi-rotor UAV structural damage detection based on MEMS sensor. International Journal of Aeroacoustics, 22 (7-8). pp. 656-674.

Baharudin, B.A. and Mustapha, M. and Ismail, A. and Zulkipli, F.N. and Ayob, F. and Ahmad, A. (2023) Microhardness and Process Parameter Optimization of Friction Stir Welding on an AA5052 Thin Plate. Advanced Structured Materials, 165. pp. 133-141.

Ismail, A. and Al�Hapis Abdul Razak, M. and Mustapha, M. and Zaki Abdullah, M. and Hussain, P. and Mohamed Saat, A. and Ayub, F. and Muaz bin Mohd Faisal, M. (2023) Optimisation of Fe-Al Diffusion Bonding in Air. Lecture Notes in Mechanical Engineering. pp. 955-964.

Baharudin, B.A. and Mustapha, M. and Ismail, A. and Zulkipli, F.N. and Ayob, F. and Ahmad, A. (2023) Residual Stress Optimization of Friction Stir Welding on an AA5052 Thin Plate. Advanced Structured Materials, 165. pp. 143-151.

Azeem, M. and Ya, H.H. and Kumar, M. and Stabla, P. and Smolnicki, M. and Gemi, L. and Khan, R. and Ahmed, T. and Ma, Q. and Sadique, M.R. and Mokhtar, A.A. and Mustapha, M. (2022) Application of Filament Winding Technology in Composite Pressure Vessels and Challenges: A Review. Journal of Energy Storage, 49. ISSN 2352152X

Ma, Y. and Mustapha, F. and Ishak, M.R. and Rahim, S.A. and Mustapha, M. (2022) Data-driven Methods for Damage Detection and Identification of UAV: A Review. Journal of Aeronautics, Astronautics and Aviation, 54 (4). pp. 405-420. ISSN 19907710

Abdullah, M.N. and Mustapha, F. and Ahmad, K.A. and Mustapha, M. and Khan, T. and Singh, B. and Sebaey, T.A. (2022) Effect of Different Pre-Treatment on the Microstructure and Intumescent Properties of Rice Husk Ash-Based Geopolymer Hybrid Coating. Polymers, 14 (11). ISSN 20734360

Baharudin, B.A. and Mustapha, M. and Azman, M.A. and Shamsuddin, A.N. and Ismail, A. and Tuan Anuwa, T.M.N. and Ab Rahman, F. and Ayob, F. and Hamid, D.A. and Rojan, M.A. (2022) The Effect of Process Temperature and Holding Time on Weldability in Diffusion Welding of Duplex Stainless Steels and Marine Grade Steels for Oil and Gas Pipes. Advanced Structured Materials, 167. ISSN 18698433

Othman, N.H. and Mustapha, M. and Sallih, N. and Ahmad, A. and Mustapha, F. and Ismail, M.C. (2022) The Effect of Residual Solvent in Carbon�Based Filler Reinforced Polymer Coating on the Curing Properties, Mechanical and Corrosive Behaviour. Materials, 15 (10). ISSN 19961944

Zakaria, M.S. and Mustapha, M. and Azmi, A.I. and Ahmad, A. and Ismail, S.O. and Shuaib, N.A. (2022) Effects of submerged convective cooling in the turning of AZ31 magnesium alloy for tool temperature and wear improvement. International Journal of Advanced Manufacturing Technology, 120 (5-6). pp. 3181-3200. ISSN 02683768

Al-Dhahebi, A.M. and Gopinath, S.C.B. and Saheed, M.S.M. and Mustapha, M. (2022) Electrospun cellulose acetate-doped 3D-graphene nanofibre for enhanced transduction of ochratoxin A determination. Bulletin of Materials Science, 45 (3). ISSN 02504707

Baharudin, B.A. and Ayob, F. and Abdul Rahim, A. and Mustapha, M. and Ismail, A. and Ab Rahman, F. and Ismail, A. (2022) Investigation on the Mechanical and Microstructural Characteristics of Diffusional Bonded Gray Cast Iron and Low Carbon Steel. Advanced Structured Materials, 167. pp. 245-262. ISSN 18698433

Zakaria, M.S. and Mustapha, M. and Azmi, A.I. and Ahmad, A. and Danish, M. and Rubaiee, S. (2022) Machinability investigations of AZ31 magnesium alloy via submerged convective cooling in turning process. Journal of Materials Research and Technology, 19. pp. 3685-3698. ISSN 22387854

Ismail, A. and Othman, N.H. and Mustapha, M. and Mohamed Saheed, M.S. and Abdullah, Z. and Muhammed, M. and Mohamed Saat, A. and Mustapha, F. (2022) Mechanical Performance and Corrosion Behaviour of Diffusion-Bonded A5083 Aluminium and A36 Mild Steel with Gallium Interlayer. Materials, 15 (18). ISSN 19961944

Dahliyanti, A. and Yunitama, D.A. and Rofiqoh, I.M. and Mustapha, M. (2022) Synthesis and characterization of silica xerogel from corn husk waste as cationic dyes adsorbent. F1000Research, 11. ISSN 20461402

Al-Dhahebi, A.M. and Jose, R. and Mustapha, M. and Saheed, M.S.M. (2022) Ultrasensitive aptasensor using electrospun MXene/polyvinylidene fluoride nanofiber composite for Ochratoxin A detection. Food Chemistry, 390. ISSN 03088146

Taufiqurrahman, I. and Ginta, T.L. and Ahmad, A. and Mustapha, M. and Fatmahardi, I. and Shozib, I.A. (2022) The effect of aluminum interlayer on weld strength, microstructure analysis, and welding parameters optimization in resistance spot welding of stainless steel 316L and Ti6Al4V titanium alloy. Engineering Solid Mechanics, 10 (2). pp. 165-178. ISSN 22918744

Mohammed, H.G. and Mohammed Badri Albarody, T. and Kareem Mohsin Al-Jothery, H. and Mustapha, M. and Sultan, N.M. (2022) A study of crystalline � texture and anisotropic properties of hexagonal BaFe12O19 sintered by in-situ magnetic-anisotropy spark plasma sintering (MASPS). Journal of Magnetism and Magnetic Materials, 553. ISSN 03048853

Anwar, M. and Mustapha, F. and Sultan, M.T.H. and Halin, I.A. and Abdullah, M.N. and Hassim, M.I. and Mustapha, M. (2021) Damage Identification on Impact and Lightning Damage of Flax Composite Laminates (Linum usitatissimum) Using Long-Pulse Thermography of a Low-Resolution Infrared Camera. Frontiers in Materials, 8. ISSN 22968016

Mujahid, Y. and Sallih, N. and Abdullah, M.Z. and Mustapha, M. (2021) Effects of processing parameters for vacuum-bag-only method on void content and mechanical properties of laminated composites. Polymer Composites, 42 (2). pp. 567-582. ISSN 02728397

Azeem, M. and Ya, H.H. and Alam, M.A. and Sultan, T.H. and Ali, M. and Sattar, M. and Ahmad, T. and Hatami, H. and Sadique, M.R. and Mokhtar, A.A. and Mustapha, M. and Khan, M.A. and Masood, F. (2021) Macroscale assessment of low-velocity impact on hybrid composite laminates Makroskalige Bewertung des Einflusses niedriger Aufprallgeschwindigkeit auf hybride Verbundlaminate. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1101-1111. ISSN 09335137

Nguyen, V.-H. and Shahedi Asl, M. and Delbari, S.A. and Le, Q.V. and Sabahi Namini, A. and Cha, J.H. and Lee, S.-H. and Jang, H.W. and Mustapha, M. and Mohammadi, M. and Shokouhimehr, M. (2021) Microstructural evolution during spark plasma sintering of TiC�AlN�graphene ceramics. International Journal of Refractory Metals and Hard Materials, 96. ISSN 02634368

Jaafar, M.F. and Mustapha, F. and Mustapha, M. (2021) Review of current research progress related to magnetorheological elastomer material. Journal of Materials Research and Technology, 15. pp. 5010-5045. ISSN 22387854

Abdullah, M.N. and Mustapha, M. and Sallih, N. and Ahmad, A. and Mustapha, F. and Dahliyanti, A. (2021) Study and use of rice husk ash as a source of aluminosilicate in refractory coating. Materials, 14 (13). ISSN 19961944

Taufiqurrahman, I. and Ahmad, A. and Mustapha, M. and Ginta, T.L. and Haryoko, L.A.F. and Shozib, I.A. (2021) The effect of welding current and electrode force on the heat input, weld diameter, and physical and mechanical properties of SS316l/Ti6Al4V dissimilar resistance spot welding with aluminum interlayer. Materials, 14 (5). pp. 1-20. ISSN 19961944

Fatmahardi, I. and Mustapha, M. and Ahmad, A. and Derman, M.N. and Lenggo Ginta, T. and Taufiqurrahman, I. (2021) An exploratory study on resistance spot welding of titanium alloy Ti-6Al-4V. Materials, 14 (9). ISSN 19961944

Nan, L. and Yalan, C. and Jixiang, L. and Dujuan, O. and Wenhui, D. and Rouhi, J. and Mustapha, M. (2020) Carbonylative Suzuki-Miyaura cross-coupling by immobilized Ni@Pd NPs supported on carbon nanotubes. RSC Advances, 10 (47). pp. 27923-27931. ISSN 20462069

Mujahid, Y. and Sallih, N. and Mustapha, M. and Abdullah, M.Z. and Mustapha, F. (2020) Effects of processing parameters for vacuum-bagging-only method on shape conformation of laminated composites. Processes, 8 (9). ISSN 22279717

Othman, N.H. and Yahya, W.Z.N. and Che Ismail, M. and Mustapha, M. and Koi, Z.K. (2020) Highly dispersed graphene oxide�zinc oxide nanohybrids in epoxy coating with improved water barrier properties and corrosion resistance. Journal of Coatings Technology and Research, 17 (1). pp. 101-114. ISSN 15470091

Mohammadi Dehcheshmeh, E. and Safarabadi, M. and Mousavi Mashhadi, M. and Mustapha, M. (2020) Numerical study of fatigue behavior of the aluminum 7075-t6 cantilever beam with angular cracks in different stress ratios. Engineering Solid Mechanics, 9 (1). pp. 77-92. ISSN 22918744

Muhammed, M. and Mustapha, M. and Ginta, T.L. and Ali, A.M. and Mustapha, F. and Hampo, C.C. (2020) Statistical review of microstructure-property correlation of stainless steel: Implication for preand post-weld treatment. Processes, 8 (7). ISSN 22279717

Baharudin, B.A. and Hussain, P. and Mustapha, M. and Ayob, F. and Ismail, A. and Ab Rahman, F. and Khalid, P.Z.M. and Hamid, D.A. and Rojan, M.A. (2020) Tensile Properties of Diffusion Bonded Duplex Stainless Steel to Low Carbon Steel. Lecture Notes in Mechanical Engineering. pp. 333-338. ISSN 21954356

Dzulkifli, H. and Mustapha, M. and Sallih, N. and Kakooei, S. and Mustapha, F. (2020) The effect of reaction temperature on the formation of 2H-SiC and 3C-SiC nanowhiskers. Engineering Solid Mechanics, 8 (4). pp. 381-388. ISSN 22918744

Othman, N.H. and Che Ismail, M. and Mustapha, M. and Sallih, N. and Kee, K.E. and Ahmad Jaal, R. (2019) Graphene-based polymer nanocomposites as barrier coatings for corrosion protection. Progress in Organic Coatings, 135. pp. 82-99. ISSN 03009440

Jie, Y.J. and Kamaruddin, S. and Mustapha, M. and Siddiquee, A.N. and Al-Ahmari, A. and Khan, Z.A. and Abidi, M.H. and Gangil, N. (2019) Reclamation of steel shots by acid leaching for powder metallurgy applications. Advances in Mechanical Engineering, 11 (7). ISSN 16878132

Ismail, A. and Hussain, P. and Mustapha, M. and Nuruddin, M.F. and Saat, A.M. and Abdullah, A. and Rahim, A.A.A. and Chevalier, S. (2018) Fe-Al diffusion bonding: Effect of reaction time on the interlayer thickness. Journal of Mechanical Engineering, 5 (Specia). pp. 80-91. ISSN 18235514

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Munir, K.S. and Sarfraz, M. (2018) Investigation of tip sonication effects on structural quality of graphene nanoplatelets (GNPs) for superior solvent dispersion. Ultrasonics Sonochemistry, 45. pp. 133-149. ISSN 13504177

Puspitasari, P. and Fauzan, R. and Ginta, T.L. and Mustapha, M. and Puspitasari, D. (2018) Morphology of aluminium with nickel addition on sand casting process. Journal of Achievements in Materials and Manufacturing Engineering, 87 (1). pp. 13-17. ISSN 17348412

Baig, Z. and Mamat, O. and Mustapha, M. (2018) Recent Progress on the Dispersion and the Strengthening Effect of Carbon Nanotubes and Graphene-Reinforced Metal Nanocomposites: A Review. Critical Reviews in Solid State and Materials Sciences, 43 (1). pp. 1-46. ISSN 10408436

Puspitasari, D. and Ginta, T.L. and Mustapha, M. and Sallih, N. and Puspitasari, P. (2018) Statistical optimization of stress relieving parameters on closed cell aluminium foam using central composite design. Archives of Materials Science and Engineering, 89 (2). pp. 55-63. ISSN 18972764

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Ali, S. and Sarfraz, M. (2018) Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear. International Journal of Minerals, Metallurgy and Materials, 25 (6). pp. 704-715. ISSN 16744799

Puspitasari, D. and Ginta, T.L. and Puspitasari, P. and Mustapha, M. (2018) The effect of thermal processing parameters on the mechanical properties of aluminium alloy foam. Journal of Achievements in Materials and Manufacturing Engineering, 91 (1). pp. 12-17. ISSN 17348412

Baig, Z. and Mamat, O. and Mustapha, M. and Mumtaz, A. and Sarfraz, M. and Haider, S. (2018) An efficient approach to address issues of graphene nanoplatelets (GNPs) incorporation in aluminium powders and their compaction behaviour. Metals, 8 (2). ISSN 20754701

Nizam, N.F.I.A. and Sallih, N. and Puspitasari, D. and Ginta, T.L. and Mustapha, M. (2018) The influence of substrate surface energy on the adhesion compatibility of epoxy adhesive using molecular simulation tool. ARPN Journal of Engineering and Applied Sciences, 13 (8). pp. 2786-2792. ISSN 18196608

Baig, Z. and Mamat, O. and Mustapha, M. and Sarfraz, M. (2017) Influence of surfactant type on the dispersion state and properties of graphene nanoplatelets reinforced aluminium matrix nanocomposites. Fullerenes Nanotubes and Carbon Nanostructures, 25 (9). pp. 545-557. ISSN 1536383X

Baig, Z. and Mamat, O. and Mustapha, M. and Altaf, K. and Mailabari, R.J. (2016) Graphene nanoplatelets (GNPS) exfoliation and dispersion in metal powder using different solvents. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12023-12028. ISSN 18196608

Zahidah, K.A. and Kakooei, S. and Pang, M.A.S.B.M.R. and Ismail, M.C. and Eng, K.K. and Raja, P.B. and Mustapha, M. (2016) Statistical analysis of effective variable parameters on corrosion rate of X52 carbons steel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12929-12936. ISSN 18196608

Johari, M.I.A. and Mustapha, M. and Mamat, O. and Kakooei, S. and Ginta, T.L. and Ismadi, M.Z.P. (2016) The microstructure, physical and mechanical properties of silicon carbide with alumina and yttria as sintering additives. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13300-13304. ISSN 18196608

Mustapha, M. and Othman, E.A. and Norsal, K. and Mustapha, F. and Mamat, O. and Ramesh, S. (2013) Carbothermal nitridation process of mechanically milled silica sand using Taguchi's method. Ceramics International, 39 (6). pp. 6119-6130. ISSN 02728842

Mustapha, M. and Mustapha, F. and Mamat, O. and Hussain, P. (2011) Fabrication of aluminium foam through pressure assisted high frequency induction heated sintering dissolution process: An experimental observation. Powder Metallurgy, 54 (3). pp. 343-353. ISSN 00325899

Mustapha, F. and Mustapha, M. and Noorsal, K. and Mamat, O. and Hussain, P. and Ahmad, F. and Muhamad, N. and Haris, S.M. (2010) Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process. Journal of Materials Processing Technology, 210 (12). pp. 1598-1612. ISSN 09240136

Conference or Workshop Item

M. Matran, W. and Mustapha, M. and Faizairi Nor, M. (2024) The influences of additives in M-type (Ba and Sr) hexaferrites' microstructure, sintering and magnetic properties: A review. In: UNSPECIFIED.

Matran, W.M. and Mustapha, M. and Nor, M.F. and Baarimah, A.O. and Alawag, A.M. and Almaari, A.S. (2023) E-Learning in Cultural Heritage: A Bibliometric Analysis. In: UNSPECIFIED.

Al-Dhahebi, A.M. and Saheed, M.S.M. and Mustapha, M. (2023) Effects of solution concentration on the synthesis of polyvinylidene fluoride (PVDF) electrospun nanofibers. In: UNSPECIFIED.

Zakaria, M.S. and Mustapha, M. and Azmi, A.I. and Al Hafiz Mohd Nawi, M. and Ahmad, A. (2023) Finite Element Modelling of Serrated Chip Formation During Turning AZ31 Magnesium Alloy. In: UNSPECIFIED.

Al-Dhahebi, A.M. and Chandra Bose Gopinath, S. and Mohamed Saheed, M.S. and Mustapha, M. (2021) Detection of Ochratoxin A using Cellulose Acetate Nanofibers Modified with Silver Nanoparticle. In: UNSPECIFIED.

Mohammed, H.G. and Albarody, T.M.B. and Mustapha, M. and Sultan, N.M. and Al-Jothery, H.K.M. (2021) Investigate the effect of process parameters of magnetic inductively assisted spark plasma sintering (SPS) of iron oxide (Fe3O4) on microstructure behaviour - Part i. In: UNSPECIFIED.

Taufiqurrahman, I. and Lenggo Ginta, T. and Mustapha, M. (2020) The effect of holding time on dissimilar resistance spot welding of stainless steel 316L and Ti6Al4V titanium alloy with aluminum interlayer. In: UNSPECIFIED.

Mohammed, H.G. and Ginta, T.L. and Mustapha, M. (2020) The investigation of microstructure and mechanical properties of resistance spot welded AISI 316L austenitic stainless steel. In: UNSPECIFIED.

Husna, O.N. and Ismail, M.C. and Mustapha, M. (2019) Mechanical and anticorrosive properties of epoxy containing modified graphene Oxide hybrids. In: UNSPECIFIED.

Othman, A.R. and Hussin, H. and Mustapha, M. and Parman, S. (2018) Cross-Disciplinary Team Learning in Engineering Project-Based: Challenges in Collaborative Learning. In: UNSPECIFIED.

Puspitasari, D. and Rabie, F.K.H. and Ginta, T.L. and Kurnia, J.C. and Mustapha, M. (2018) The Influence of Temperature on Stability of Aluminum Foam Cell Wall during Foaming Process. In: UNSPECIFIED.

Baig, Z. and Mamat, O. and Mustapha, M. and Ali, S. and Yasir, M. (2018) Low energy solution ball milling of graphene nanoplatelets (GNPs) reinforced aluminium nanocomposites and its mechanical properties. In: UNSPECIFIED.

Mohd Sohor, M.A.H. and Mustapha, M. and Mamat, O. (2017) Analysis of contributing factors for synthesizing silicon carbide using Taguchi's approach. In: UNSPECIFIED.

Mohd Sohor, M.A.H. and Mustapha, M. and Chandra Kurnia, J. (2017) Silicon carbide- from synthesis to application: A review. In: UNSPECIFIED.

Mohd Sohor, M.A.H. and Mustapha, M. and Mamat, O. (2017) The effect of milling duration on silicon dioxide characterization. In: UNSPECIFIED.

Yusnenti, F.M.Y. and Othman, M. and Mustapha, M. and MohdYusri, I. (2016) Silicanizing Process on Mild Steel Substrate by Using Tronoh Silica Sand: Microstructure, composition and coating growth. In: UNSPECIFIED.

Mustapha, M. and Ismail, F. and Mamat, O. (2011) Empirical relationship between relative electrical conductivity and relative density of the AI-foam fabricated through pressure assisted sintering/dissolution process. In: UNSPECIFIED.