Article

Alfellag, M.A. and Mohamed Kamar, H. and Abidin, U. and Kazi, S.N. and Alawi, O.A. and Muhsan, A.S. and Azwadi Che Sidik, N. and Shaikh, K. and Ahmed Khan, W. (2024) Green synthesized clove-treated carbon nanotubes/titanium dioxide hybrid nanofluids for enhancing flat-plate solar collector performance. Applied Thermal Engineering, 246. ISSN 13594311

Alfellag, M.A. and Kamar, H.M. and Abidin, U. and Kazi, S.N. and Sidik, N.A.C. and Muhsan, A.S. and Alawi, O.A. (2024) Optimizing mixing ratio of multi-walled carbon nanotubes and titanium dioxide: A green approach to high-performance hybrid nanofluids for heat transfer. Powder Technology, 436.

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Hussein, I.A. and Muhsan, A.S. and Ridha, S. and Salih, A.A. (2024) A gated recurrent unit model to predict Poisson's ratio using deep learning. Journal of Rock Mechanics and Geotechnical Engineering, 16 (1). pp. 123-135.

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Azella Zaine, S.N. and Khatani, M. and Yar, A. and Ahmad, W. and Hussain, M.B. and Alothman, A.A. and Saleh Mushab, M.S. (2023) Graphene loaded TiO2 submicron spheres scattering layer for efficient dye-sensitized solar cell. Chemosphere, 321.

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Zaine, S.N.A. and Yar, A. and Ahmad, W. and Irshad, M.I. and Hussain, M.B. (2023) High-yield TiO2 submicron sphere/nanoparticle-blended scattering layer for efficient and scalable dye-sensitized solar cells. Emergent Materials, 6 (2). pp. 671-679.

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Muhsan, A.S. and Abdulkadir, S.J. and Hussein, I.A. and Salih, A.A. (2023) Prediction of critical total drawdown in sand production from gas wells: Machine learning approach. Canadian Journal of Chemical Engineering, 101 (5). pp. 2493-2509.

Alfellag, M.A. and Kamar, H.M. and Sidik, N.A.C. and Muhsan, A.S. and Kazi, S.N. and Alawi, O.A. and Abidin, U. (2023) Rheological and thermophysical properties of hybrid nanofluids and their application in flat-plate solar collectors: a comprehensive review. Journal of Thermal Analysis and Calorimetry, 148 (14). pp. 6645-6686.

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Muhsan, A.S. and Hussein, I.A. (2023) A robust Gaussian process regression-based model for the determination of static Young�s modulus for sandstone rocks. Neural Computing and Applications, 35 (21). pp. 15693-15707.

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Muhsan, A.S. and Hussein, I.A. (2022) An Accurate Reservoir's Bubble Point Pressure Correlation. ACS Omega, 7 (15). pp. 13196-13209. ISSN 24701343

Mohamed, D.F. and Hamdi, S.S. and Alzanam, A. and Mohyaldinn, M.E. and Muhsan, A.S. (2022) Carbon-based nanocoating for extended lifetime of conventional scale inhibitor squeeze treatment in sandstone reservoirs. Journal of Petroleum Science and Engineering, 211. ISSN 09204105

Ishtiaq, U. and Aref, A. and Muhsan, A.S. and Rashid, A. and Hamdi, S.S. (2022) High strength glass beads coated with CNT/rGO incorporated urethane coating for improved crush resistance for effective hydraulic fracturing. Journal of Petroleum Exploration and Production Technology. ISSN 21900558

Hamdi, S.S. and Al-Kayiem, H.H. and Alsabah, M.S. and Muhsan, A.S. (2022) A comparative study of dispersed and grafted nanofluids of graphene nanoplatelets with natural polymer in high salinity brine for enhanced oil recovery. Journal of Petroleum Science and Engineering, 210. ISSN 09204105

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Muhsan, A.S. and Hussein, I.A. (2022) A reservoir bubble point pressure prediction model using the Adaptive Neuro-Fuzzy Inference System (ANFIS) technique with trend analysis. PLoS ONE, 17 (8 Augu). ISSN 19326203

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Muhsan, A.S. and Hassan, A. (2021) Apparent and plastic viscosities prediction of water-based drilling fluid using response surface methodology. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 616. ISSN 09277757

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Muhsan, A.S. (2021) Deep Learning Approach for Robust Prediction of Reservoir Bubble Point Pressure. ACS Omega, 6 (33). pp. 21499-21513. ISSN 24701343

Alzanam, A.A.A. and Ishtiaq, U. and Muhsan, A.S. and Mohamed, N.M. (2021) A Multiwalled Carbon Nanotube-Based Polyurethane Nanocomposite-Coated Sand/Proppant for Improved Mechanical Strength and Flowback Control in Hydraulic Fracturing Applications. ACS Omega, 6 (32). pp. 20768-20778. ISSN 24701343

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Muhsan, A.S. and Hussein, I.A. (2021) A robust fuzzy logic-based model for predicting the critical total drawdown in sand production in oil and gas wells. PLoS ONE, 16 (4 Apri). ISSN 19326203

Alakbari, F.S. and Mohyaldinn, M.E. and Muhsan, A.S. and Hasan, N. and Ganat, T. (2020) Chemical sand consolidation: From polymers to nanoparticles. Polymers, 12 (5). ISSN 20734360

Ahmad, F. and Mohammad, M. and Muhsan, A.S. and Ali, M. and Naseer, A. and Aslam, M. and Malik, M.R.R. (2020) Effect of Thermal Cycling on Thermal Conductivity of Powder Injection Moulded MWCNT Reinforced Copper Matrix Composites. Lecture Notes in Mechanical Engineering. pp. 377-387. ISSN 21954356

Hamdi, S.S. and Al-Kayiem, H.H. and Muhsan, A.S. and Magaril, E. (2020) Experimental dataset on the dispersion stability of natural polymer non-covalently functionalized graphene nanoplatelets in high salinity brines. Data in Brief, 31. ISSN 23523409

Ishtiaq, U. and Muhsan, A.S. and Rozali, A.S. and Mohamed, N.M. and Badri Albarody, T.M. (2020) Graphene oxide/carbon nanotubes nanocoating for improved scale inhibitor adsorption ability onto rock formation. Journal of Petroleum Exploration and Production Technology, 10 (1). pp. 149-157. ISSN 21900558

Hamdi, S.S. and Al-Kayiem, H.H. and Muhsan, A.S. (2020) Natural polymer non-covalently grafted graphene nanoplatelets for improved oil recovery process: A micromodel evaluation. Journal of Molecular Liquids, 310. ISSN 01677322

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Zaine, S.N.A. and Bashiri, R. and Khatani, M. and Samsudin, A.E. (2020) Solvent exfoliated graphene incorporated mixed phase TiO2 transparent photoelectrode for the efficient and color transparent dye-sensitized solar cell. Solar Energy, 206. pp. 317-329. ISSN 0038092X

Hussein, O.A. and Habib, K. and Muhsan, A.S. and Saidur, R. and Alawi, O.A. and Ibrahim, T.K. (2020) Thermal performance enhancement of a flat plate solar collector using hybrid nanofluid. Solar Energy, 204. pp. 208-222. ISSN 0038092X

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Bashiri, R. and Shamsudin, A.E. and Zaine, S.N.A. (2019) Few-layer graphene supported polyaniline (PANI) film as a transparent counter electrode for dye-sensitized solar cells. Diamond and Related Materials, 94. pp. 242-251. ISSN 09259635

Hussein, O.A. and Habib, K. and Muhsan, A.S. (2019) Turbulence mixed convective nanofluid flow over double forward-facing steps: A numerical simulation study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (2). pp. 299-317. ISSN 22897879

Hussein, O.A. and Habib, K. and Saidur, R. and Muhsan, A.S. and Shahabuddin, S. and Alawi, O.A. (2019) The influence of covalent and non-covalent functionalization of GNP based nanofluids on its thermophysical, rheological and suspension stability properties. RSC Advances, 9 (66). pp. 38576-38589. ISSN 20462069

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Khatani, M. and Bashiri, R. and Zaine, S.N.A. and Shamsudin, A.E. (2018) Dual functional passivating layer of graphene/TiO2 for improved performance of dye-sensitized solar cells. Applied Nanoscience (Switzerland), 8 (5). pp. 1001-1013. ISSN 21905509

Muhsan, A.S. and Mohamed, N.M. and Ahmad, F. and Albarody, T.M.B. and Shahid, M.U. (2016) Effects of sintering parameters on the microstructural characteristics of cu/cnts nanocomposites. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14294-14298. ISSN 18196608

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2015) Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites. International Journal of Powder Metallurgy, 51 (1). pp. 57-66. ISSN 08887462

Ahmad, F. and Aslam, M. and Raza, M.R. and Muhsan, A.S. and Shirazi, M.I. (2014) Experimental investigation on thermal conduction of carbon nanotubes reinforced copper matrix composites. Applied Mechanics and Materials, 564. pp. 455-460. ISSN 16609336

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Megat Yusoff, P.S.M. and Raza, M.R. (2014) Homogeneous distribution of carbon nanotubes in copper matrix nanocomposites fabricated via combined technique. Nanoscience and Nanotechnology Letters, 6 (10). pp. 865-874. ISSN 19414900

Raza, M.R. and Ahmad, F. and Omar, M.A. and Muhsan, A.S. (2013) Development of defects free stainless steel parts using powder injection molding. Asian Journal of Scientific Research, 6 (2). pp. 307-314. ISSN 19921454

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2013) Fabrication and microstructural analysis of CNTs reinforced copper matrix nanocomposites via MIM technique. Applied Mechanics and Materials, 459. pp. 11-17. ISSN 16609336

Raza, M.R. and Ahmad, F. and Omar, M.A. and German, R.M. and Muhsan, A.S. (2013) Role of debinding to control mechanical properties of powder injection molded 316L stainless steel. Advanced Materials Research, 699. pp. 875-882. ISSN 10226680

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Yusoff, P.S.M.B.T.M. and Raza, M.R. (2012) Carbon nanotubes reinforced copper matrix nanocomposites via metal injection molding technique. Journal of Applied Sciences, 12 (23). pp. 2397-2403. ISSN 18125654

Raza, M.R. and Ahmad, F. and Omar, M.A. and German, R.M. and Muhsan, A.S. (2012) Defect analysis of 316LSS during the powder injection moulding process. Defect and Diffusion Forum, 329. pp. 35-43. ISSN 10120386

Raza, M.R. and Ahmad, F. and Mamat, O. and Omar, M.A. and German, R.M. and Muhsan, A.S. (2012) Effects of sintering temperature and cooling rate on mechanical properties of powder injection molded 316L stainless steel. Solid State Phenomena, 185. pp. 102-105. ISSN 10120394

Ahmad, F. and Muhsan, A.S. and Raza, M.R. (2012) Rheological behavior of carbon nanotubes/ copper feedstocks for metal injection molding. Advanced Materials Research, 403-40. pp. 5335-5340. ISSN 10226680

Conference or Workshop Item

Zaaba, A.N. and Nasif, M.S. and Muhsan, A.S. (2023) Computational fluid dynamics analysis of double pipe heat exchanger using titanium dioxide nanofluid with ethylene glycol/water. In: UNSPECIFIED.

Alzanam, A.A.A. and Muhsan, A.S. (2021) Resin-Based Nanocomposites Coated Proppants as Scale Inhibitor Carrier and Slowly Releasing Container. In: UNSPECIFIED.

Alzanam, A.A.A. and Muhsan, A.S. (2021) Resin-Based Nanocomposites Coated Proppants as Scale Inhibitor Carrier and Slowly Releasing Container. In: UNSPECIFIED.

Hamdi, S.S. and Muhsan, A.S. and Al-Kayiem, H.H. (2020) Influence of non-covalently functionalized graphene nanoplatelets on viscosity and wettability for improved oil mobility at reservoir conditions. In: UNSPECIFIED.

Hussein, O.A. and Habib, K. and Nasif, M. and Saidur, R. and Muhsan, A.S. (2020) Investigation of stability, dispersion, and thermal conductivity of functionalized multi-walled carbon nanotube based nanofluid. In: UNSPECIFIED.

Qian, T. and Muhsan, A.S. and Htwe, L. and Mohamed, N. and Hussein, O. (2020) Urethane based nanocomposite coated proppants for improved crush resistance during hydraulic fracturing. In: UNSPECIFIED.

Naseer, A. and Ahmad, F. and Muhsan, A.S. and Aslam, M. (2019) Investigation of suitable graphene reinforcements for copper based PIM feedstock. In: UNSPECIFIED.

Albarody, T.M.B. and Al-Jothery, H.K.M. and Hussein, A.R. and Teng, L.Z. and Muhsan, A.S. and Ahmad, F. (2018) Ultrafast-contactless plasma arc sintering. In: UNSPECIFIED.

Shahid, M.U. and Mohamed, N.M. and Khatani, M. and Muhsan, A.S. and Samsudin, A. and Irshad, M.I. and Zaine, S.N.A. (2017) Graphene modified FTO/TiO2 interface photoelectrode for improved performance of dye sensitized solar cells. In: UNSPECIFIED.

Khatani, M. and Mohamed, N.M. and Hamid, N.H. and Muhsan, A.S. and Sahmer, A.Z. (2015) Effect of photoanode thickness on electrochemical performance of dye sensitized solar cell. In: UNSPECIFIED.

Shirazi, I. and Ahmad, F. and Raza, M.R. and Muhsan, A.S. and Aslam, M. (2015) Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding. In: UNSPECIFIED.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Yusoff, P.S.M.M. and Raza, M.R. and Afrooz, I.E. (2014) Experimental preparation and numerical simulation of high thermal conductive Cu/CNTs Nanocomposites. In: UNSPECIFIED.

Irfan Shirazi, M. and Ahmad, F. and Rafi Raza, M. and Muhsan, A.S. and Omer, M.A. and Aslam, M. (2014) Orientation of carbon fibers in copper matrix produced by powder injection molding. In: UNSPECIFIED.

Afrooza, I.E. and Binti Megat Yusoff, P.S.M. and Ahmad, F. and Muhsan, A.S. (2014) A numerical analysis for predicting the thermal conductivity of carbon nanotube reinforced copper-matrix nanocomposites. In: UNSPECIFIED.

Muhsan, A.S. and Ahmad, F. (2011) Development of nanocomposites heat sink (MWCNTs/Cu) using powder injection moulding for electronic applications. In: UNSPECIFIED.

Muhsan, A.S. and Ahmad, F. and Rafi Raza, M. (2011) Flow properties of Cu/CNTs feedstocks: For powder injection molding. In: UNSPECIFIED.