Ismael, M.A. and Rosli, M.A.F. and Aziz, A.R.A. and Mohammed, S.E. and Opatola, R.A. and El-Adawy, M. (2024) Gas to liquid (GTL) role in diesel engine: Fuel characteristics and emission: A review. Cleaner Engineering and Technology, 18.

Tariq, A. and Ahmed, S.W. and Bin Baharom, M. and Altaf, K. and Hussain, G. and Jamil, A. and Mohammed, S.E. and Ali, H.M. (2024) An investigation of thermal and hydrodynamic behaviour of compound fins under turbulent flow conditions: A numerical and experimental approach. Alexandria Engineering Journal, 89. pp. 149-171.

Masri, M.M. and Aziz, A.R.A. and Ezrann, Z. and Zainal, A. and Mohammed, S.E. (2023) The Design and Simulation of an Exhaust Manifold for Free-Piston Linear Generator Engine. Lecture Notes in Mechanical Engineering. pp. 653-659.

Rosli, M.A.F. and Ismael, M.A. and Aziz, A.R.A. and Mohammed, S.E. and A.B., O. and Opatola, R.A. (2023) Experimental study of Gas-To-Liquid (GTL) and diesel fuel blends evaporation behaviour and droplet lifetime through Leidenfrost effect. Energy Reports, 10. pp. 805-818.

Ismael, M.A. and Aziza, A.R.A. and Heikal, M. and Crua, C. and Zainal, E.Z.A. and Mohammed, S.E. and Nisar, Z. (2023) Spray Characteristics and Droplet Micro-Explosion of Water in Diesel Emulsion. Lecture Notes in Mechanical Engineering. pp. 193-203.

Baharom, M.B. and Mohammed, S.E. and Hussain, N. and Aziz, A.R.A. and Zainal, Z.E.A. and Ismael, M.A. (2023) A Study on the Effect of Structural Properties and Configuration of Low-Stiffness-Resilient-Shaft (LSRS) on Torsional Behavior. Lecture Notes in Mechanical Engineering. pp. 995-1011. ISSN 21954356

Jamil, A. and Baharom, M.B. and Aziz, A.R.B.A. and Mohammed, S.E. and Ayandotun, W.B. and Tariq, A. (2023) A study on in-cylinder flow characteristics of crank-rocker engine using CFD and PIV. Materials Today: Proceedings.

Ayandotun, W.B. and Aziz, A.R.A. and Ismael, M.A. and Mohammed, S.E. and Raheem, A.T. (2022) Comparative assessment of the performance and combustion attributes of a free piston linear generator fuelled with CNG and CNG-CO2. Case Studies in Thermal Engineering, 38. ISSN 2214157X

A. Aziz, A.R. and Ismael, M.A. and Zainal A., E.Z. and Mohammed, S.E. and Baharom, M.B. and Anwarudin, A.R.T. (2022) Effect of generator configuration on the free-piston motion and power generation of air-driven expander system. Alexandria Engineering Journal, 61 (4). pp. 3093-3104. ISSN 11100168

Dabbaghi, M.F. and Baharom, M.B. and Abdul Karim, Z.A. and A. Aziz, A.R. and Mohammed, S.E. and Zainal A., E.Z. (2021) Comparative evaluation of different heat transfer correlations on a single curved-cylinder spark ignition crank-rocker engine. Alexandria Engineering Journal, 60 (3). pp. 2963-2978. ISSN 11100168

Zainal A., E.Z. and Ismael, M.A. and Aziz, A.R.A. and Mohammed, S.E. and Baharom, M.B. and Firmansyah and Hanif Ibrahim, M. and Sahalan, M.I. and Qawiy, A. (2021) Effect of aspect ratio on frequency and power generation of a free-piston linear generator. Applied Thermal Engineering, 192. ISSN 13594311

Zainal A, E.Z. and Mohammed, S.E. and A. Aziz, A.R. and Baharom, M.B. and Jaffry, A. and Firmansyah and Shahrul A, A. and Ismael, M.A. (2021) Effect of aspect ratio on the performance characteristics of free piston linear generator engine fueled by hydrogen. International Journal of Hydrogen Energy, 46 (17). pp. 10506-10517. ISSN 03603199

Rosli, M.A.F. and Aziz, A.R.A. and Ismael, M.A. and Elbashir, N.O. and Zainal A., E.Z. and Baharom, M. and Mohammed, S.E. (2021) Experimental study of micro-explosion and puffing of gas-to-liquid (GTL) fuel blends by suspended droplet method. Energy, 218. ISSN 03605442

Ismael, M.A. and Aziz, A.R.A. and Mohammed, S.E. and Zainal A, E.Z. and Baharom, M.B. and Raheem, A.T. and Ayandotun, W.B. and Harith, F.I. and Khazaimah, I. (2021) Experimental study on combustion stability and performance of hydrogen-enriched compressed natural gas of a free-piston linear generator. International Journal of Hydrogen Energy, 46 (79). pp. 39536-39547. ISSN 03603199

Ismael, M.A. and Aziz, A.R.A. and Zainal A., E.Z. and Mohammed, S.E. and Ayandotun, W.B. and Baharom, M.B. and Sallehudin, M.S. and Syakirin R., M. and Anwerudin, A.R.T. and Masri, M.M. (2021) Investigation on free-piston motion and power generation of a dual-piston air-driven expander linear generator. Energy Reports, 7. pp. 2388-2397. ISSN 23524847

Ayandotun, W.B. and A. Aziz, A.R. and Abdul Karim, Z.A.B. and Mohammed, S.E. and Zainal A., E.Z. and Raheem, A.T. and Ismael, M.A. (2021) Investigation on the combustion and performance characteristics of a DI free piston linear generator engine fuelled with CNG-CO2 blend. Applied Thermal Engineering, 198. ISSN 13594311

Ismael, M.A. and A. Aziz, A.R. and Mohammed, S.E. and Zainal A, E.Z. and Baharom, M.B. and Hagos, F.Y. (2021) Macroscopic and microscopic spray structure of water-in-diesel emulsions. Energy, 223. ISSN 03605442

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Mohammed, S.E. (2020) An experimental investigation on the influence of port injection at valve on combustion and emission characteristics of B5/biogas RCCI engine. Applied Sciences (Switzerland), 10 (2). ISSN 20763417

Mohammed, S.E. and Baharom, M.B. and Rashid Aziz, A.A. and Zainal, E.Z.Z. (2019) Modelling of combustion characteristics of a single curved-cylinder spark-ignition crank-rocker engine. Energies, 12 (17). ISSN 19961073

Aziz, A.R.A. and Baharom, M.B. and Abidin, E.Z.Z. and Firmansyah and Mohammed, S.E. and Nadhari, W.N.A.W. and Evelyn and Jaffry, M.N.M. (2019) Principal, design and characteristics of a free piston linear generator. Springer Singapore, pp. 127-144. ISBN 9789811501029; 9789811501012

Jaffry, M.N.M. and Abdul Karim, Z.A. and Ramlan, N.A. and Mohammed, S.E. and Zainal, E.Z. and Firmansyah and Ahmad, A.S. and Baharom, M.B. and Heikal, M.R. and Aziz, A.R.A. (2018) Bouncing phenomena of free piston linear generator at starting process. In: UNSPECIFIED.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. and Zainal, A.E.Z. and Firmansyah, F. (2018) Experimental investigation of ignition timing on the performance and emission characteristics of a crank-rocker engine. International Journal of Vehicle Structures and Systems, 10 (2). pp. 146-149. ISSN 09753060

Mohammed, S.E. and Ramlan, N.A. and Aziz, A.R.A. and Firmansyah, F. and Ezrann Zainal, Z. (2018) Investigation of late fuel injection position on the combustion of free piston engine. In: UNSPECIFIED.

Nadhari, W.N.A.W. and Ramlan, N.A. and Mohammed, S.E. and Munir, S. and Zainal, Z.E.Z. and Firmansyah, F. and Aziz, A.A. and Heikal, M.R. (2018) Performance characteristics of free piston linear generator on different equivalence ratio. In: UNSPECIFIED.

Kardan, R. and Baharom, M.B. and Mohammed, S.E. and Aziz, A.R.A. and Zainal, A.E.Z. and Firmansyah (2018) The effect of engine throttle position on the performance characteristics of a crank-rocker engine fitted with a conventional cylinder head. In: UNSPECIFIED.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2017) Performance and combustion characteristics of a novel crank-rocker engine. Journal of Mechanical Science and Technology, 31 (7). pp. 3563-3571. ISSN 1738494X

Mohammed, S.E. and Baharom, M.B. and Rashid, A. and Aziz, A. (2016) Thermodynamic analysis of a single cylinder crank-rocker engine. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12239-12246. ISSN 18196608

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2016) The effect of rocker ratio and connecting rod length on the performance of a crank-rocker mechanism with an extended rocker input link. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4221-4227. ISSN 18196608

Mohammed, S.E. and Baharom, M. and Abdul Aziz, A.R. (2014) Comparative analysis of two proposed models of connecting rods for crank-rocker engines using finite element method. In: UNSPECIFIED.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2014) Estimation of counterweight for shaking force balancing of a crank-rocker mechanism. Applied Mechanics and Materials, 663. pp. 135-140. ISSN 16609336

Mohammed, S.E. and Iffa, E.D. and Baharom, M.B. and Aziz, A.R.A. (2011) Spray characteristic comparisons of compressed natural gas and hydrogen fuel using digital imaging. Journal of Applied Sciences, 11 (9). pp. 1624-1629. ISSN 18125654

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. and Firmansyah (2011) The effects of fuel-injection timing at medium injection pressure on the engine characteristics and emissions of a CNG-DI engine fueled by a small amount of hydrogen in CNG. International Journal of Hydrogen Energy, 36 (18). pp. 11997-12006. ISSN 03603199