Yan, X. and Chen, P.-S. and Mohammed, B.S. and Liu, B. (2024) Effect of Hollow Bodies on the Strength and Density of Bubble Concrete. Lecture Notes in Civil Engineering, 385. pp. 133-149. ISSN 23662557

Bheel, N. and Mohammed, B.S. (2024) Modelling and optimization of long-term modulus of elasticity and Poisson's ratio of graphene oxide based engineered cementitious composites by using response surface methodology. Diamond and Related Materials, 143.

Qaddura, M.J. and Ean, L.W. and Mohammed, B.S. and Ng, C.Y. (2024) Numerical Modeling of One-Way Reinforced Concrete Wall Panels with Openings Strengthened with Carbon Fiber Reinforced Polymer (CFRP). Lecture Notes in Civil Engineering, 324. pp. 599-609.

Udeze, O.J. and Mohammed, B.S. and Adebanjo, A.U. and Abdulkadir, I. (2024) Optimizing an eco-friendly high-density concrete for offshore applications: A study on fly ash partial replacement and graphene oxide nano reinforcement. Case Studies in Chemical and Environmental Engineering, 9.

Abdulkadir, I. and Mohammed, B.S. and Woen, E.L. and Sing, W.L. and Al-Yacouby, A.M. (2024) Optimizing sulfate and acid resistance in rubberized engineered cementitious composite with graphene oxide-pretreated crumb rubber: A response surface methodology approach. Developments in the Built Environment, 18.

Mohammed, B.S. and Min, T.H. and Sutanto, M.H. and Joewono, T.B. and As�ad, S. (2024) Preface. Lecture Notes in Civil Engineering, 324. v. ISSN 23662557

Tan, A.S. and Tan, J.C. and Ean, L.W. and Ng, C.Y. and Mohammed, B.S. and Norhisham, S. (2024) Review of Rubber-Based Waste in Compressed Bricks. Lecture Notes in Civil Engineering, 324. pp. 233-241.

Abdulkadir, I. and Mohammed, B.S. and Al-Yacouby, A.M. and Woen, E.L. and Tafsirojjaman, T. (2024) Tailoring an engineered cementitious composite with enhanced mechanical performance at ambient and elevated temperatures using graphene oxide and crumb rubber. Journal of Materials Research and Technology, 28. pp. 4508-4530.

Nazhif, A.A. and Nugroho, E.O. and Rusdy, N.F.P. and Kardhana, H. and Nuraeni, S. and Pradoto, R.G.K. and Kuntoro, A.A. and Mohammed, B.S. and Dharmowijoyo, D.B.E. and Nurkhaerani, F. and Wijaya, A.R. and Fauzi, M.F. and Rayya, R. (2024) The effect of paving block from plastic waste material in the urban drainage: Study case in residential areas. In: UNSPECIFIED.

Bheel, N. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Durability Behaviours of Engineered Cementitious Composites Blended with Carbon Nanotubes against Sulphate and Acid Attacks by Applying RSM Modelling and Optimization. Buildings, 13 (8).

Bheel, N. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Effect of Graphene Oxide as a Nanomaterial on the Durability Behaviors of Engineered Cementitious Composites by Applying RSM Modelling and Optimization. Buildings, 13 (8).

Bheel, N. and Mohammed, B.S. and Ali, M.O.A. and Shafiq, N. and Radu, D. (2023) Effect of graphene oxide as a nanomaterial on the bond behaviour of engineered cementitious composites by applying RSM modelling and optimization. Journal of Materials Research and Technology, 26. pp. 1484-1507.

Abdulkadir, I. and Mohammed, B.S. (2023) Effect of graphene oxide on the long-term modulus of elasticity and Poisson's ratio of rubberized ECC. In: UNSPECIFIED.

Bheel, N. and Mohammed, B.S. and Ahmed Ali, M.O. and Shafiq, N. and Mohamed Tag-eldin, E. and Ahmad, M. (2023) Effect of polyvinyl alcohol fiber on the mechanical properties and embodied carbon of engineered cementitious composites. Results in Engineering, 20.

Bheel, N. and Mohammed, B.S. and Abdulkadir, I. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Effects of Graphene Oxide on the Properties of Engineered Cementitious Composites: Multi-Objective Optimization Technique Using RSM. Buildings, 13 (8).

Shivangi and Singh, P. and Mohammed, B.S. (2023) The Efficacy of Electromechanical Impedance Monitoring of Embedded Piezoelectric Ceramic Lead Zirconium Titanate Sensors in Different Orientations for Hybrid Fiber-Reinforced Concrete Structures Hydration. Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 6 (4). ISSN 25723901

Al-Aidrous, A.-H.M.H. and Shafiq, N. and Rahmawati, Y. and Mohammed, B.S. and Al-Ashmori, Y.Y. and Baarimah, A.O. and Alawag, A.M. (2023) Major blocking factors affecting the application of industrialized building system. Ain Shams Engineering Journal, 14 (10).

Giri, Y.G.A.L.P. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. and Abdulkadir, I. and Singh, P. and Ravindran, G. (2023) Mechanical and Microstructural Properties of Rubberized Geopolymer Concrete: Modeling and Optimization. Buildings, 13 (8).

Hong, W.C. and Mohammed, B.S. and Abdulkadir, I. and Liew, M.S. (2023) Modeling and Optimizing the Effect of Palm Oil Fuel Ash on the Properties of Engineered Cementitious Composite. Buildings, 13 (3).

Shivangi and Singh, P. and Mohammed, B.S. (2023) Optimization of Mix Design for Concrete with and without Polypropylene Fibre. Lecture Notes in Civil Engineering, 338 LN. pp. 191-202. ISSN 23662557

Abdulkadir, I. and Mohammed, B.S. (2023) Rubbercrete Interlocking Brick as a Sustainable Construction Material: A Short Discussion of Its Fundamental Properties. Lecture Notes in Civil Engineering, 334 LN. pp. 663-675.

Singh, P. and Yee, N.C. and Mohammed, B.S. (2023) Utilizing Stearic-Acid-Coated Marble Dust for the Production of Eco-Friendly Self-Cleaning Concrete: RSM Modeling and Optimization. Sustainability (Switzerland), 15 (11).

Mohammed, B.S. and Abdulkadir, I. and Perceka, W. and Djayaprabha, H.S. (2023) The behavior of rubberized engineered cementitious composites under extreme loading: A review. In: UNSPECIFIED.

Rahim, N.I. and Mohammed, B.S. and Abdulkadir, I. and Dahim, M. (2022) Effect of Crumb Rubber, Fly Ash, and Nanosilica on the Properties of Self-Compacting Concrete Using Response Surface Methodology. Materials, 15 (4). ISSN 19961944

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2022) Effect of Graphene Oxide and Crumb Rubber on the Drying Shrinkage Behavior of Engineered Cementitious Composite (ECC): Experimental Study, RSM�Based Modelling and Optimization. Lecture Notes in Civil Engineering, 179. pp. 29-42. ISSN 23662557

Yan, X. and Chen, P.-S. and Liu, B. and Mohammed, B.S. and Jin, J. (2022) Effect of Hollow Body Material on Mechanical Properties of Bubble Concrete. Crystals, 12 (5). ISSN 20734352

Abdulkadir, I. and Mohammed, B.S. and Ali, M.O.A. and Liew, M.S. (2022) Effects of Graphene Oxide and Crumb Rubber on the Fresh Properties of Self-Compacting Engineered Cementitious Composite Using Response Surface Methodology. Materials, 15 (7). ISSN 19961944

Rahmawati, Y. and Pradipto, E. and Mustaffa, Z. and Saputra, A. and Mohammed, B.S. and Utomo, C. (2022) Enhancing Students� Competency and Learning Experience in Structural Engineering through Collaborative Building Design Practices. Buildings, 12 (4). ISSN 20755309

Al-Fakih, A. and Mohammed, B.S. and Al-Osta, M.A. and Assaggaf, R. (2022) Evaluation of the mechanical performance and sustainability of rubberized concrete interlocking masonry prism. Journal of Materials Research and Technology, 18. pp. 4385-4402. ISSN 22387854

Al-Fakih, A. and Mohammed, B.S. and Al-Shugaa, M.A. and Al-Osta, M.A. (2022) Experimental investigation of dry-bed joints in rubberized concrete interlocking masonry. Journal of Building Engineering, 58. ISSN 23527102

Abd Razak, S.N. and Shafiq, N. and Hasan Nikbakht, E. and Mohammed, B.S. and Guillaumat, L. and Farhan, S.A. (2022) Fire performance of fly-ash-based geopolymer concrete: Effect of burning temperature on mechanical and microstructural properties. In: UNSPECIFIED.

Kamarul Zaman, A.B. and Mustaffa, Z. and Mohammed, B.S. and Ng, C.Y. (2022) Lateral Infiltration Capacity of Pervious Concrete and Its Performance as Pavement Curb. Journal of Materials in Civil Engineering, 34 (3). ISSN 08991561

Appana, P.M. and Mohammed, B.S. and Abdulkadir, I. and Ali, M.O.A. and Liew, M.S. (2022) Mechanical, Microstructural and Drying Shrinkage Properties of NaOH-Pretreated Crumb Rubber Concrete: RSM-Based Modeling and Optimization. Materials, 15 (7). ISSN 19961944

Choo, J. and Mohammed, B.S. and Chen, P.-S. and Abdulkadir, I. and Yan, X. (2022) Modeling and Optimizing the Effect of 3D Printed Origami Bubble Aggregate on the Mechanical and Deformation Properties of Rubberized ECC. Buildings, 12 (12). ISSN 20755309

Murali, M. and Alaloul, W.S. and Mohammed, B.S. and Musarat, M.A. and Salaheen, M.A. and Al-Sabaeei, A.M. and Isyaka, A. (2022) Utilizing graphene oxide in cementitious composites: A systematic review. Case Studies in Construction Materials, 17. ISSN 22145095

Lye, H.L. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. (2021) Bond relationship of carbon fiber-reinforced polymer (Cfrp) strengthened steel plates exposed to service temperature. Materials, 14 (13). ISSN 19961944

Mohammed, B.S. and Al-Fakih, A. and Liew, M.S. (2021) Characteristics of interlocking concrete bricks incorporated crumb rubber and fly ash. Lecture Notes in Civil Engineering, 132. pp. 631-639. ISSN 23662557

Aman, S.S. and Mohammed, B.S. and Al-Fakih, A. (2021) Crumb rubber mortar and its properties: An overview. In: UNSPECIFIED.

Mohammed, B.S. and Xian, L.W. and Haruna, S. and Liew, M.S. and Abdulkadir, I. and Zawawi, N.A.W.A. (2021) Deformation Properties of Rubberized Engineered Cementitious Composites Using Response Surface Methodology. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 45 (2). pp. 729-740. ISSN 22286160

Usman Kankia, M. and Baloo, L. and Mohammed, B.S. and Hassan, S.B. and Haruna, S. and Danlami, N. and Affiana Ishak, E. and Nurliyana Samahani, W. (2021) Effects of petroleum sludge ash in fly ash-based geopolymer mortar. Construction and Building Materials, 272. ISSN 09500618

Liew, M.S. and Mohammed, B.S. and Danyaro, K.U. and Al-Yacouby, A.M. and Haruna, S. (2021) Effects of quartz powder on the compressive strength of high performance engineered cementitious composites. Lecture Notes in Civil Engineering, 132. pp. 677-684. ISSN 23662557

Yan, X. and Chen, P.-S. and Al-Fakih, A. and Liu, B. and Mohammed, B.S. and Jin, J. (2021) Experiments and mechanical simulation on bubble concrete: Studies on the effects of shape and position of hollow bodies mixed in concrete. Crystals, 11 (8). ISSN 20734352

Al-Aidrous, A.-H.M.H. and Shafiq, N. and Mohammed, B.S. and Al-Ashmori, Y.Y. and Baarimah, A.O. and Al-Masoodi, A.H.H. (2021) Investigation of the current Innovative Industrialized Building Systems (IBS) in Malaysia. In: UNSPECIFIED.

Haruna, S. and Mohammed, B.S. and Wahab, M.M.A. and Kankia, M.U. and Amran, M. and Gora, A.M. (2021) Long-term strength development of fly ash-based one-part alkali-activated binders. Materials, 14 (15). ISSN 19961944

Shahrul, S. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. (2021) Mechanical properties of crumb rubber mortar containing nano-silica using response surface methodology. Materials, 14 (19). ISSN 19961944

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and multi-objective optimization of the fresh and mechanical properties of self-compacting high volume fly ash ECC (HVFA-ECC) using response surface methodology (RSM). Case Studies in Construction Materials, 14. ISSN 22145095

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and optimization of the mechanical properties of engineered cementitious composite containing crumb rubber pretreated with graphene oxide using response surface methodology. Construction and Building Materials, 310. ISSN 09500618

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. (2021) On rubberized engineered cementitious composites (R-ECC): A review of the constituent material. Case Studies in Construction Materials, 14. ISSN 22145095

Kankia, M.U. and Baloo, L. and Danlami, N. and Samahani, W.N. and Mohammed, B.S. and Haruna, S. and Jagaba, A.H. and Abubakar, M. and Ishak, E.A. and Sayed, K. and Zawawi, N.A.B.W. (2021) Optimization of cement-based mortar containing oily sludge ash by response surface methodology. Materials, 14 (21). ISSN 19961944

Kankia, M.U. and Baloo, L. and Danlami, N. and Mohammed, B.S. and Haruna, S. and Abubakar, M. and Jagaba, A.H. and Sayed, K. and Abdulkadir, I. and Salihi, I.U. (2021) Performance of fly ash-based inorganic polymer mortar with petroleum sludge ash. Polymers, 13 (23). ISSN 20734360

Rahim, N.I. and Mohammed, B.S. and Al-Fakih, A. (2021) Physical properties of rubberized self-consolidating concrete (R-SCC) incorporating nano-silica. In: UNSPECIFIED.

Mohammed, B.S. and Shafiq, N. and Kutty, S.R.M. and Mohamad, H. and Balogun, A.-L. (2021) Preface. Lecture Notes in Civil Engineering, 132. v. ISSN 23662557

Loganathan, R. and Mohammed, B.S. (2021) Properties of rubberized engineered cementitious composites containing nano-silica. Materials, 14 (13). ISSN 19961944

Anwar, A. and Mohammed, B.S. and Wahab, M.B.A. and Muthusamy, K. and Liew, M.S. (2021) Structural Quality of Graphene Oxide Nanosheets on the Basis of Defect Ratio: A Raman Study. Lecture Notes in Mechanical Engineering, 46. pp. 423-439. ISSN 21954356

Ean, L.W. and Malek, M.A. and Mohammed, B.S. and Tang, C.-W. and Ng, C.Y. (2021) Study of c-s-h formation of cemented sediment brick. Lecture Notes in Civil Engineering, 132. pp. 501-509. ISSN 23662557

Murali, M. and Mohammed, B.S. and Abdulkadir, I. and Liew, M.S. and Alaloul, W.S. (2021) Utilization of crumb rubber and high-volume fly ash in concrete for environmental sustainability: Rsm-based modeling and optimization. Materials, 14 (12). ISSN 19961944

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Wahab, M.W.A. and Haruna, S. (2021) Utilizing of crumb rubber derived recycled scrap tires in masonry application: A review. Materials Science Forum, 1030 M. pp. 73-87. ISSN 02555476

Sabapathy, L. and Mohammed, B.S. and Al-Fakih, A. and Wahab, M.M.A. and Liew, M.S. and Amran, Y.H.M. (2020) Acid and sulphate attacks on a rubberized engineered cementitious composite containing graphene oxide. Materials, 13 (14). ISSN 19961944

Lye, H.L. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. and Al-Fakih, A. (2020) Bond behaviour of CFRP-strengthened ECC using Response Surface Methodology (RSM). Case Studies in Construction Materials, 12. ISSN 22145095

Al-Fakih, A. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. and Alyousef, R. and Alabduljabbar, H. (2020) Characteristic compressive strength correlation of rubberized concrete interlocking masonry wall. Structures, 26. pp. 169-184. ISSN 23520124

Haruna, S. and Mohammed, B.S. and Wahab, M.M.A. and Haruna, A. (2020) Compressive strength and workability of high calcium one-part alkali activated mortars using response surface methodology. In: UNSPECIFIED.

Hong, D.L.H. and Mohammed, B.S. and Al-Fakih, A. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. (2020) Deformation properties of rubberized ecc incorporating nano graphene using response surface methodology. Materials, 13 (12). pp. 1-14. ISSN 19961944

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Liew, M.S. (2020) Durability performance of high volume fly ash roller compacted concrete pavement containing crumb rubber and nano silica. International Journal of Pavement Engineering, 21 (12). pp. 1437-1444. ISSN 10298436

Mohammed, B.S. and Yen, L.Y. and Haruna, S. and Seng Huat, M.L. and Abdulkadir, I. and Al-Fakih, A. and Liew, M.S. and Abdullah Zawawi, N.A.W. (2020) Effect of elevated temperature on the compressive strength and durability properties of crumb rubber engineered cementitious composite. Materials, 13 (16). ISSN 19961944

Haruna, S. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. (2020) Effect of paste aggregate ratio and curing methods on the performance of one-part alkali-activated concrete. Construction and Building Materials, 261. ISSN 09500618

Anwar, A. and Mohammed, B.S. and Wahab, M.A. and Liew, M.S. (2020) Enhanced properties of cementitious composite tailored with graphene oxide nanomaterial - A review. Developments in the Built Environment, 1. ISSN 26661659

Al-Fakih, A. and Wahab, M.M.A. and Mohammed, B.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. and As'ad, S. (2020) Experimental study on axial compressive behavior of rubberized interlocking masonry walls. Journal of Building Engineering, 29. ISSN 23527102

Al-Nini, A. and Nikbakht, E. and Syamsir, A. and Shafiq, N. and Mohammed, B.S. and Al-Fakih, A. and Al-Nini, W. and Amran, Y.H.M. (2020) Flexural behavior of double-skin steel tube beams filled with fiber-reinforced cementitious composite and strengthened with CFRP sheets. Materials, 13 (14). ISSN 19961944

Al-Fakih, A. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. (2020) Flexural behavior of rubberized concrete interlocking masonry walls under out-of-plane load. Construction and Building Materials, 263. ISSN 09500618

Liew, M.S. and Aswin, M. and Danyaro, K.U. and Mohammed, B.S. and Al-Yacouby, A.M. (2020) Investigation of fibers reinforced engineered cementitious composites properties using quartz powder. Materials, 13 (11). ISSN 19961944

Adamu, M. and Mohammed, B.S. and Woen, E.L. and Yen, L.Y. and Bala, N. (2020) Mechanical performance of engineered cementitious composite containing crumb rubber at elevated temperature. In: UNSPECIFIED.

Aman, S.S. and Mohammed, B.S. and Wahab, M.A. and Anwar, A. (2020) Performance of reinforced concrete slab with opening strengthened using CFRP. Fibers, 8 (4). ISSN 20796439

Mohammed, B.S. and Aswin, M. and Liew, M.S. (2020) Prediction of failure load of RC and R-ECC dapped-end beams. Case Studies in Construction Materials, 13. ISSN 22145095

Kankia, M.U. and Baloo, L. and Mohammed, B.S. and Hassan, S.B. and Ishak, E.A. and Zango, Z.U. (2020) Review of petroleum sludge thermal treatment and utilization of ash as a construction material, a way to environmental sustainability. International Journal of Advanced and Applied Sciences, 7 (12). pp. 68-81. ISSN 2313626X

Rahim, N.I. and Mohammed, B.S. and Al-Fakih, A. and Wahab, M.M.A. and Liew, M.S. and Anwar, A. and Mugahed Amran, Y.H. (2020) Strengthening the structural behavior of web openings in RC deep beam using CFRP. Materials, 13 (12). pp. 1-21. ISSN 19961944

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W. and Mohammed, B.S. and Adamu, M. and Musharat, M.A. (2020) Structural equation modelling of construction project performance based on coordination factors. Cogent Engineering, 7 (1). ISSN 23311916

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Bin Abdul Wahab, M.M. and Zawawi, N.A.W.A. and As'ad, S. (2020) A review of the effect of waste tire rubber on the properties of ECC. International Journal of Advanced and Applied Sciences, 7 (8). pp. 105-116. ISSN 2313626X

Anwar, A. and Mohammed, B.S. and Liew, M.S. and Wahab, M.A. and Zawawi, N.A.W.A. (2019) Below-Grade Sulfur Storage Pits in Oil Refineries: A Review. Journal of Failure Analysis and Prevention, 19 (6). pp. 1745-1760. ISSN 15477029

Achara, B.E. and Mohammed, B.S. and Liew, M.S. (2019) Bond behaviour of nano-silica-modified self-compacting engineered cementitious composite using response surface methodology. Construction and Building Materials, 224. pp. 796-814. ISSN 09500618

Mohammed, B.S. and Achara, B.E. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. (2019) Effects of elevated temperature on the tensile properties of NS-modified self-consolidating engineered cementitious composites and property optimization using response surface methodology (RSM). Construction and Building Materials, 206. pp. 449-469. ISSN 09500618

Adamu, M. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2019) Evaluating the impact resistance of roller compacted concrete containing crumb rubber and nanosilica using response surface methodology and Weibull distribution. World Journal of Engineering, 16 (1). pp. 33-43. ISSN 17085284

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Nikbakht, E. (2019) Incorporation of waste materials in the manufacture of masonry bricks: An update review. Journal of Building Engineering, 21. pp. 37-54. ISSN 23527102

Mohammed, B.S. and Haruna, S. and Wahab, M.M.A. and Liew, M.S. and Haruna, A. (2019) Mechanical and microstructural properties of high calcium fly ash one-part geopolymer cement made with granular activator. Heliyon, 5 (9). ISSN 24058440

Mohammed, B.S. and Adamu, M. (2019) Non-destructive evaluation of nano silica-modified roller-compacted rubbercrete using combined SonReb and response surface methodology. Road Materials and Pavement Design, 20 (4). pp. 815-835. ISSN 14680629

Mohammed, B.S. and Haruna, S. and Mubarak bn Abdul Wahab, M. and Liew, M.S. (2019) Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology. Construction and Building Materials, 225. pp. 776-787. ISSN 09500618

Ng, C.Y. and Narong, A.R. and Kamarul Zaman, A.B. and Mustaffa, Z. and Mohammed, B.S. and Ean, L.W. (2019) Properties of modified high permeable concrete with a crumb rubber. Open Civil Engineering Journal, 13 (1). pp. 82-91. ISSN 18741495

Ahmad, S. and Anwar, A. and Mohammed, B.S. and Wahab, M.B.A. and Ahmad, S.A. (2019) Strength behavior of concrete by partial replacement of fine aggregate with ceramic powder. International Journal of Recent Technology and Engineering, 8 (2). pp. 5712-5718. ISSN 22773878

Mohammed, B.S. and Aswin, M. and Liew, M.S. and Zawawi, N.A.W.A. (2019) Structural Performance of RC and R-ECC Dapped-End Beams Based on the Role of Hanger or Diagonal Reinforcements Combined by ECC. International Journal of Concrete Structures and Materials, 13 (1). ISSN 19760485

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2018) Abrasion Resistance of Nano Silica Modified Roller Compacted Rubbercrete: Cantabro Loss Method and Response Surface Methodology Approach. In: UNSPECIFIED.

Alaloul, W.S. and Liew, M.S. and Wan Zawawi, N.A. and Mohammed, B.S. and Adamu, M. (2018) An Artificial neural networks (ANN) model for evaluating construction project performance based on coordination factors. Cogent Engineering, 5 (1). pp. 1-18. ISSN 23311916

Alaloul, W.S. and Loganathan, R. and Mohammed, B.S. and Hasan, E. and Nikbakht and Liew, M.S. and Khed, V. and Adamu, M. (2018) Deformation properties of concrete containing crumb rubber as partial replacement to fine aggregate. International Journal of Civil Engineering and Technology, 9 (10). pp. 317-326. ISSN 09766308

Abdullah, M.S. and Alaloul, W.S. and Liew, M.S. and Mohammed, B.S. (2018) Delays and Cost Overruns Causes during Construction of Palm Oil Refinery Projects. In: UNSPECIFIED.

Al-Fakih, A. and Mohammed, B.S. and Nuruddin, F. and Nikbakht, E. (2018) Development of Interlocking Masonry Bricks and its' Structural Behaviour: A Review Paper. In: UNSPECIFIED.

Mohammed, B.S. and Liew, M.S. and S Alaloul, W. and Al-Fakih, A. and Ibrahim, W. and Adamu, M. (2018) Development of rubberized geopolymer interlocking bricks. Case Studies in Construction Materials, 8. pp. 401-408. ISSN 22145095

Adamu, M. and Mohammed, B.S. and Liew, M.S. (2018) Effect of crumb rubber and nano silica on the creep and drying shrinkage of roller compacted concrete pavement. International Journal of GEOMATE, 15 (47). pp. 58-65. ISSN 21862982

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Effect of crumb rubber and nano silica on the fatigue performance of roller compacted concrete pavement. Cogent Engineering, 5 (1). ISSN 23311916

Haruna, S. and Mohammed, B.S. and Shahir-Liew, M. and Alaloul, W.S. and Haruna, A. (2018) Effect of water-binder ratio and naoh molarity on the properties of high calcium fly ash geopolymer mortars at outdoor curing. International Journal of Civil Engineering and Technology, 9 (10). pp. 1339-1352. ISSN 09766308

Khed, V.C. and Mohammed, B.S. and Nuruddin, M.F. (2018) Effects of different crumb rubber sizes on the flowability and compressive strength of hybrid fibre reinforced ECC. In: UNSPECIFIED.

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the effect of crumb rubber and nano silica on the properties of high volume fly ash roller compacted concrete pavement using non-destructive techniques. Case Studies in Construction Materials, 8. pp. 380-391. ISSN 22145095

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the static and dynamic modulus of elasticity of roller compacted rubbercrete using response surface methodology. International Journal of GEOMATE, 14 (41). pp. 186-192. ISSN 21862982

Khed, V.C. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Adamu, M. and Al-Fakih, A. and Karthikeyan, J. (2018) Experimental investigation on pullout strength of hybrid reinforcement of fibre in rubberized cementitious composites. International Journal of Civil Engineering and Technology, 9 (7). pp. 1612-1622. ISSN 09766308

Woen, E.L. and Malek, M.A. and Mohammed, B.S. and Chao-Wei, T. and Tamunif, M.T. (2018) Experimental study on compressive strength of sediment brick masonry. In: UNSPECIFIED.

Khed, V.C. and Mohammed, B.S. and Shahir Liew, M. and Alaloul, W.S. and Adamu, M. (2018) Hybrid fibre rubberized ECC optimization for modulus of elasticity. International Journal of Civil Engineering and Technology, 9 (7). pp. 918-928. ISSN 09766308

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. and Mohammed, B.S. (2018) Industry Revolution IR 4.0: Future Opportunities and Challenges in Construction Industry. In: UNSPECIFIED.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Adamu, M. and Khed, V.C. and Dahim, M.A. and Al-Mattarneh, H. (2018) Mechanical behavior of rubberized interlocking bricks for masonry structural applications. International Journal of Civil Engineering and Technology, 9 (9). pp. 185-193. ISSN 09766308

Mohammed, B.S. and Adamu, M. (2018) Mechanical performance of roller compacted concrete pavement containing crumb rubber and nano silica. Construction and Building Materials, 159. pp. 234-251. ISSN 09500618

Adamu, M. and Mohammed, B.S. and Shahir Liew, M. (2018) Mechanical properties and performance of high volume fly ash roller compacted concrete containing crumb rubber and nano silica. Construction and Building Materials, 171. pp. 521-538. ISSN 09500618

Mohammed, B.S. and Khed, V.C. and Liew, M.S. (2018) Optimization of hybrid fibres in engineered cementitious composites. Construction and Building Materials, 190. pp. 24-37. ISSN 09500618

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2018) Physical properties of the rubberized interlocking masonry brick. International Journal of Civil Engineering and Technology, 9 (6). pp. 656-664. ISSN 09766308

Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. and Hoong, C.Y. and Adamu, M. (2018) Properties of nano-silica modified pervious concrete. Case Studies in Construction Materials, 8. pp. 409-422. ISSN 22145095

Mohammed, B.S. and Khed, V.C. and Nuruddin, M.F. (2018) Rubbercrete mixture optimization using response surface methodology. Journal of Cleaner Production, 171. pp. 1605-1621. ISSN 09596526

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Skid Resistance of nano silica modified roller compacted rubbercrete for pavement applications: Experimental methods and response surface methodology. Cogent Engineering, 5 (1). ISSN 23311916

Mohammed, B.S. and Achara, B.E. and Liew, M.S. (2018) The influence of high temperature on microstructural damage and residual properties of nano-silica-modified (NS-modified) self-consolidating engineering cementitious composites (SC-ECC) using response surface methodology (RSM). Construction and Building Materials, 192. pp. 450-466. ISSN 09500618

Ean, L.W. and Malek, M.A. and Mohammed, B.S. and Tang, C.-W. and Bong, P.X.H. (2018) A review on characterization of sediments for Green bricks production. International Journal of Engineering and Technology(UAE), 7 (4). pp. 41-47. ISSN 2227524X

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Effect of Mineral Filler type on Strength of Roller Compacted Rubbercrete for Pavement Applications. In: UNSPECIFIED.

Fauzi, A. and Nuruddin, M.F. and Malkawi, A.B. and Abdullah, M.M.A.B. and Mohammed, B.S. (2017) Effect of alkaline solution to fly ash ratio on geopolymer mortar properties. Key Engineering Materials, 733 KE. pp. 85-88. ISSN 10139826

Malkawi, A.B. and Nuruddin, M.F. and Fauzi, A. and Al-Mattarneh, H. and Mohammed, B.S. (2017) Effect of plasticizers and water on properties of HCFA geopolymers. Key Engineering Materials, 733 KE. pp. 76-79. ISSN 10139826

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Effect of polycarboxylate superplasticizer dosage on the mechanical performance of roller compacted Rubbercrete for pavement applications. Journal of Engineering and Applied Sciences, 12 (20). pp. 5253-5260. ISSN 1816949X

Mohammed, B.S. and Adamu, M. and Shafiq, N. (2017) Establishing relationship between modulus of elasticity and strength of nano silica modified roller compacted rubbercrete. International Journal of GEOMATE, 13 (39). pp. 103-110. ISSN 21862982

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Evaluating the effect of superplasticizer on the properties of roller compacted concrete using response surface methodology. ARPN Journal of Engineering and Applied Sciences, 12 (21). pp. 6206-6215. ISSN 18196608

Mohammed, B.S. and Syed, Z.I. and Khed, V. and Qasim, M.S. (2017) Evaluation of nano-silica modified ECC based on ultrasonic pulse velocity and rebound hammer. Open Civil Engineering Journal, 11. pp. 638-649. ISSN 18741495

Musa, N. and Mohammed, B.S. and Liew, M.S. and Singh, P. (2017) Flexural strength of rc beams with multiple layers of cfrp sheet. International Journal of Civil Engineering and Technology, 8 (12). pp. 134-143. ISSN 09766308

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Mechanical performance of roller compacted rubbercrete with different mineral filler. Jurnal Teknologi, 79 (6). pp. 75-88. ISSN 01279696

Achara, B.E. and Mohammed, B.S. and Nuruddin, M.F. (2017) Optimisation of nano-silica modified self-compacting high-Volume fly ash mortar. In: UNSPECIFIED.

Achara, B.E. and Mohammed, B.S. and Nuruddin, M.F. (2017) Properties of Nano-Silica modified self-compacting high-volume fly ash mortar. Journal of Engineering and Applied Sciences, 12 (20). pp. 5294-5300. ISSN 1816949X

Mohammed, B.S. and Achara, B.E. and Nuruddin, M.F. and Yaw, M. and Zulkefli, M.Z. (2017) Properties of nano-silica-modified self-compacting engineered cementitious composites. Journal of Cleaner Production, 162. pp. 1225-1238. ISSN 09596526

Mohammed, B.S. and Adamu, M. and Shafiq, N. (2017) A review on the effect of crumb rubber on the properties of rubbercrete. International Journal of Civil Engineering and Technology, 8 (9). pp. 599-615. ISSN 09766308

Mohammed, B.S. and Nuruddin, M.F. and Shafiq, N. (2016) Development of high strength nano-silica modified rubbercrete. In: UNSPECIFIED.

Mahamood, N. and Mohammed, B.S. and Shafiq, N. and Eisa, S.M.B. (2016) Development of nano silica modified solid rubbercrete bricks. In: UNSPECIFIED.

Malkawi, A.B. and Nuruddin, M.F. and Fauzi, A. and Almattarneh, H. and Mohammed, B.S. (2016) Effects of Alkaline Solution on Properties of the HCFA Geopolymer Mortars. In: UNSPECIFIED.

Nuruddin, M.F. and Malkawi, A.B. and Fauzi, A. and Mohammed, B.S. and Al-Mattarneh, H.M. (2016) Effects of alkaline solution on the microstructure of HCFA geopolymers. In: UNSPECIFIED.

Nuruddin, M.F. and Malkawi, A.B. and Fauzi, A. and Mohammed, B.S. and Almattarneh, H.M. (2016) Evolution of geopolymer binders: A review. In: UNSPECIFIED.

Nuruddin, M.F. and Malkawi, A.B. and Fauzi, A. and Mohammed, B.S. and Almattarneh, H.M. (2016) Geopolymer concrete for structural use: Recent findings and limitations. In: UNSPECIFIED.

Mohammed, B.S. and Aswin, M. and Beatty, W.H. and Hafiz, M. (2016) Longitudinal shear resistance of PVA-ECC composite slabs. Structures, 5. pp. 247-257. ISSN 23520124

Awang, A. and Mohammed, B.S. and Mustafa, M.R. (2016) Mix design proportion for strength prediction of rubbercrete using artificial neural network. In: UNSPECIFIED.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2016) Nano silica modified roller compacted rubbercrete � an overview. In: UNSPECIFIED.

Mohammed, B.S. and Aswin, M. and Vethamoorty (2016) Properties and structural behavior of sawdust interlocking bricks. In: UNSPECIFIED.

Mohammed, B.S. and Nuruddin, M.F. and Yogeswary, A. and Dayalan, P. (2016) Properties of high permeable concrete utilizing pozzolanic materials. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1457-1466. ISSN 18196608

Mohammed, B.S. and Awang, A.B. and Wong, S.S. and Nhavene, C.P. (2016) Properties of nano silica modified rubbercrete. Journal of Cleaner Production, 119. pp. 66-75. ISSN 09596526

Mohammed, B.S. and Nuruddin, M.F. and Aswin, M. and Mahamood, N. and Al-Mattarneh, H. (2016) Structural Behavior of Reinforced Self-Compacted Engineered Cementitious Composite Beams. Advances in Materials Science and Engineering, 2016. ISSN 16878434

Mohammed, B.S. and Ibrahim, R.B. (2015) Convertible active power filter: A new approach to compensate for current quality problems in the DS. In: UNSPECIFIED.

Mohammed, B.S. and Ahmed Nezri, A.N.S.B. (2015) Durability aspects and bond strength of rubbercrete containing nano silica. In: UNSPECIFIED.

Mohammed, B.S. and Ibrahim, R. and Perumal, N. and Rama Rao, K.S. (2015) Power flow control of a multi-bus/three-feeder distribution system using generalized unified power quality conditioner. Journal of Electrical Engineering and Technology, 10 (1). pp. 8-17. ISSN 19750102

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Prediction of RC beams failure load using non-linear finite element analysis. International Journal of Applied Engineering Research, 10 (22). pp. 42974-42980. ISSN 09734562

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Root cause of reinforced concrete dapped-end beams failure. International Journal of Applied Engineering Research, 10 (22). pp. 42927-42933. ISSN 09734562

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Shear Failure of RC Dapped-End Beams. Advances in Materials Science and Engineering, 2015. ISSN 16878434

Mohammed, B.S. and Ibrahim, R.B. and Perumal, N. and Rama Rao, K.S. (2014) Comparison of multi-carriers based PWM for multilevel converters. International Review on Modelling and Simulations, 7 (3). pp. 363-378. ISSN 19749821

Mohammed, B.S. and Foo, W.L. and Abdullahi, M. (2014) Flexural strength of palm oil clinker concrete beams. Materials and Design, 53. pp. 325-331. ISSN 02613069

Mohammed, B.S. and Cheng, H.T. (2014) Immediate deflection of pretensioned inverted t-beam with circular web openings strengthened with GFRP using response surface methodology. Key Engineering Materials, 594-59. pp. 516-520. ISSN 10139826

Mohammed, B.S. and Baharun, M.H. and Nuruddin, M.F. and Erikole, O.P.D. and Murshed, N.A. (2014) Mechanical properties of engineered cementitious composites mixture. Applied Mechanics and Materials, 567. pp. 428-433. ISSN 16609336

Chua, H.-Q. and Ean, L.-W. and Mohammed, B.S. and Malek, M.A. and Wong, L.S. and Tang, C.-W. and Lee, Z.-K. and Lim, A.-F. and See, Y.-Y. and Ooi, J.-L. and Hashim, M. and Yong, U. and Abbas, N.A. and Yusop, H. and Muda, R.S. (2014) Potential use of cameron highlands reservoir sediment in compressed bricks. Key Engineering Materials, 594-59. pp. 487-491. ISSN 10139826

Mohammed, B.S. and Alanni, O. (2014) Shear capacity of RC beams with web openings strengthened with multi layers of CFRP. Applied Mechanics and Materials, 567. pp. 494-498. ISSN 16609336

Mohammed, B.S. and Abdullahi, M. and Hoong, C.K. (2014) Statistical models for concrete containing wood chipping as partial replacement to fine aggregate. Construction and Building Materials, 55. pp. 13-19. ISSN 09500618

Mohammed, B.S. and Azmi, N.J. (2014) Strength reduction factors for structural rubbercrete. Frontiers of Structural and Civil Engineering, 8 (3). pp. 270-281. ISSN 20952430

Mohammed, B.S. and Woen, E.L. and Malek, M.A. and Sing, W.L. and Abbas, N.A. and Yusop, H. and Muda, R.S. and Hashim, M. and Yong, U. (2013) Development of sediment brick utilizing reservoir sediment and fly ash. Applied Mechanics and Materials, 420. pp. 276-280. ISSN 16609336

Mohammed, B.S. and Ean, L.W. and Malek, M.A. (2013) One way RC wall panels with openings strengthened with CFRP. Construction and Building Materials, 40. pp. 575-583. ISSN 09500618

Mohammed, B.S. and Ibrahim, R. and Ram Rao, S. and Perumal, N. (2013) Performance evaluation of R-UPQC and L-UPQC based on a novel voltage imperfections detection algorithm. International Review of Electrical Engineering, 8 (4). pp. 1311-1323. ISSN 18276660

Mohammed, B.S. and Foo, W.L. and Hossain, K.M.A. and Abdullahi, M. (2013) Shear strength of palm oil clinker concrete beams. Materials and Design, 46. pp. 270-276. ISSN 02641275

Mohammed, B.S. and Rao, K.S.R. and Ibrahim, R. and Perumal, N. (2012) Application of custom power park to improve power quality of sensitive loads. In: UNSPECIFIED.

Mohammed, B.S. and Rama Rao, K.S. and Ibrahim, R. and Perumal, N. (2012) Performance evaluation of R-UPQC and L-UPQC based on a novel voltage detection algorithm. In: UNSPECIFIED.

Mohammed, B.S. and Rao, K.S.R. and Perumal, N. (2011) Cascade multi-level converter based DVR and D-STATCOM for voltage sag and swell reduction. In: UNSPECIFIED.

Mohammed, B.S. and Rao, K.S.R. and Nallagownden, P.A.L. (2011) Improvement of power quality of a two feeder system using Unified Power Quality Conditioner. In: UNSPECIFIED.