Article

Abu Talip, R.A. and Yahya, W.Z.N. and Mohamed, N.M. and Zaki, Y.H. and Ramly, K. and Zaine, S.N.A. and Bustam, M.A. and Singh, P.K. (2024) A performance enhancement of dye-sensitized solar cells using pyrazolium-based ionic liquids electrolytes vs imidazolium-based ionic liquids electrolytes. Journal of Molecular Liquids, 398.

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Azella Zaine, S.N. and Khatani, M. and Yar, A. and Ahmad, W. and Hussain, M.B. and Alothman, A.A. and Saleh Mushab, M.S. (2023) Graphene loaded TiO2 submicron spheres scattering layer for efficient dye-sensitized solar cell. Chemosphere, 321.

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Zaine, S.N.A. and Yar, A. and Ahmad, W. and Irshad, M.I. and Hussain, M.B. (2023) High-yield TiO2 submicron sphere/nanoparticle-blended scattering layer for efficient and scalable dye-sensitized solar cells. Emergent Materials, 6 (2). pp. 671-679.

Ullah, F. and Mohamed, N.M. and Kait, C.F. and Ghani, U. and Saheed, M.S.M. (2022) A DFT+U approach: Superior charge transfer characteristics and optoelectronic properties of GQD@TiO2 rutile (110) surface for improved hydrogen evolution. Surfaces and Interfaces, 30. ISSN 24680230

Ullah, F. and Mohamed, N.M. and Ghani, U. and Saheed, M.S.M. (2022) First Principle DFT + U Calculations for the Optoelectronic Properties of Cu and C-Cu co-doped TiO2Anatase Model. Asian Journal of Chemistry, 34 (7). pp. 1863-1868. ISSN 09707077

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Shahid, M.U. (2022) Nanoparticle/Core-Shell Composite Structures with Superior Optical and Electrochemical Properties in a Dye-Sensitized Solar Cell. Nanomaterials, 12 (18). ISSN 20794991

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. and Jose, R. (2022) Optoelectronic Enhancement of Perovskite Solar Cells through the Incorporation of Plasmonic Particles. Micromachines, 13 (7). ISSN 2072666X

Subramani, I.G. and Perumal, V. and Gopinath, S.C.B. and Fhan, K.S. and Mohamed, N.M. (2022) Organic-Inorganic Hybrid Nanoflower Production and Analytical Utilization: Fundamental to Cutting-Edge Technologies. Critical Reviews in Analytical Chemistry, 52 (7). pp. 1488-1510. ISSN 10408347

Subramani, I.G. and Perumal, V. and Gopinath, S.C.B. and Mohamed, N.M. and Ovinis, M. and Sze, L.L. (2021) 1,1'-Carbonyldiimidazole-copper nanoflower enhanced collapsible laser scribed graphene engraved microgap capacitive aptasensor for the detection of milk allergen. Scientific Reports, 11 (1). ISSN 20452322

Vasudevan, M. and Tai, M.J.Y. and Perumal, V. and Gopinath, S.C.B. and Murthe, S.S. and Ovinis, M. and Mohamed, N.M. and Joshi, N. (2021) Cellulose acetate-MoS2 nanopetal hybrid: A highly sensitive and selective electrochemical aptasensor of Troponin I for the early diagnosis of Acute Myocardial Infarction. Journal of the Taiwan Institute of Chemical Engineers, 118. pp. 245-253. ISSN 18761070

Umrani, Z.A. and Khatani, M. and Uqaili, M.A. and Mohamed, N.M. and Hamid, N.H. and Chowdhary, B.S. (2021) Dye sensitised solar power generating window: Towards environmentally sustainable energy efficiency in ICT. International Journal of Computer Aided Engineering and Technology, 14 (2). pp. 255-277. ISSN 17572657

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Shahid, M.U. (2021) Enhancement of charge transport of a dye-sensitized solar cell utilizing tio2 quantum dot photoelectrode film. Coatings, 11 (12). ISSN 20796412

Bashiri, R. and Irfan, M.S. and Mohamed, N.M. and Sufian, S. and Ling, L.Y. and Suhaimi, N.A. and Samsudin, M.F.R. (2021) Hierarchically SrTiO3@TiO2@Fe2O3 nanorod heterostructures for enhanced photoelectrochemical water splitting. International Journal of Hydrogen Energy, 46 (48). pp. 24607-24619. ISSN 03603199

Vasudevan, M. and Tai, M.J.Y. and Perumal, V. and Gopinath, S.C.B. and Murthe, S.S. and Ovinis, M. and Mohamed, N.M. and Joshi, N. (2021) Highly sensitive and selective acute myocardial infarction detection using aptamer-tethered MoS2 nanoflower and screen-printed electrodes. Biotechnology and Applied Biochemistry, 68 (6). pp. 1386-1395. ISSN 08854513

Alzanam, A.A.A. and Ishtiaq, U. and Muhsan, A.S. and Mohamed, N.M. (2021) A Multiwalled Carbon Nanotube-Based Polyurethane Nanocomposite-Coated Sand/Proppant for Improved Mechanical Strength and Flowback Control in Hydraulic Fracturing Applications. ACS Omega, 6 (32). pp. 20768-20778. ISSN 24701343

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2021) Stability Analysis of Partial Slip Texture Journal Bearing. Lecture Notes in Mechanical Engineering. pp. 217-225. ISSN 21954356

Subramani, I.G. and Perumal, V. and Gopinath, S.C.B. and Mohamed, N.M. and Joshi, N. and Ovinis, M. and Sze, L.L. (2020) 3D nanoporous hybrid nanoflower for enhanced non-faradaic redox-free electrochemical impedimetric biodetermination. Journal of the Taiwan Institute of Chemical Engineers, 116. pp. 26-35. ISSN 18761070

Samsudin, M.F.R. and Dumas, A. and Bashiri, R. and Mohamed, N.M. and Sufian, S. (2020) Development of the g-C3N4/BiVO4 microflower photocatalyst for photocatalytic degradation of amoxicillin and hydrogen production. Malaysian Journal of Microscopy, 16 (1). pp. 180-187. ISSN 18237010

Samsudin, M.F.R. and Ullah, H. and Bashiri, R. and Mohamed, N.M. and Sufian, S. and Ng, Y.H. (2020) Experimental and DFT Insights on Microflower g-C3N4/BiVO4Photocatalyst for Enhanced Photoelectrochemical Hydrogen Generation from Lake Water. ACS Sustainable Chemistry and Engineering, 8 (25). pp. 9393-9403. ISSN 21680485

Ishtiaq, U. and Muhsan, A.S. and Rozali, A.S. and Mohamed, N.M. and Badri Albarody, T.M. (2020) Graphene oxide/carbon nanotubes nanocoating for improved scale inhibitor adsorption ability onto rock formation. Journal of Petroleum Exploration and Production Technology, 10 (1). pp. 149-157. ISSN 21900558

Ong, C.C. and Mohamed, N.M. and Saheed, M.S.M. (2020) Hollow three-dimensional graphene reinforced with poly (methyl methacrylate) for selective absorption of oil. Fullerenes Nanotubes and Carbon Nanostructures, 29 (2). pp. 149-155. ISSN 1536383X

Bashiri, R. and Mohamed, N.M. and Sufian, S. and Kait, C.F. (2020) Improved photoelectrochemical hydrogen production over decorated titania with copper and nickel oxides by optimizing the photoanode and reaction characteristics. Materials Today Chemistry, 16. ISSN 24685194

Bashiri, R. and Samsudin, M.F.R. and Mohamed, N.M. and Suhaimi, N.A. and Ling, L.Y. and Sufian, S. and Kait, C.F. (2020) Influence of growth time on photoelectrical characteristics and photocatalytic hydrogen production of decorated Fe2O3 on TiO2 nanorod in photoelectrochemical cell. Applied Surface Science, 510. ISSN 01694332

Yar, A. and Dennis, J.O. and Mohamed Saheed, M.S. and Mohamed, N.M. and Irshad, M.I. and Mumtaz, A. and Jose, R. (2020) Physical reduction of graphene oxide for supercapacitive charge storage. Journal of Alloys and Compounds, 822. ISSN 09258388

Phong, G.M. and M. Pilus, R. and Mustaffa, A. and Thangavel, L. and Mohamed, N.M. (2020) Relationship between fly ash nanoparticle-stabilized-foam and oil production in core displacement and simulation studies. Fuel, 266. ISSN 00162361

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Zaine, S.N.A. and Bashiri, R. and Khatani, M. and Samsudin, A.E. (2020) Solvent exfoliated graphene incorporated mixed phase TiO2 transparent photoelectrode for the efficient and color transparent dye-sensitized solar cell. Solar Energy, 206. pp. 317-329. ISSN 0038092X

Rao, T.V.V.L.N. and A Rani, A.M. and Mohamed, N.M. and Ya, H.H. and Awang, M. and M Hashim, F. (2020) Static and stability analysis of partial slip texture multi-lobe journal bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234 (4). pp. 567-587. ISSN 13506501

Samsudin, M.F.R. and Bashiri, R. and Mohamed, N.M. and Ng, Y.H. and Sufian, S. (2020) Tailoring the morphological structure of BiVO4 photocatalyst for enhanced photoelectrochemical solar hydrogen production from natural lake water. Applied Surface Science, 504. ISSN 01694332

Azella Zaine, S.N. and Mohamed, N.M. and Khatani, M. and Samsudin, A.E. and Shahid, M.U. (2020) Trap state and charge recombination in nanocrystalline passivized conductive and photoelectrode interface of dye-sensitized solar cell. Coatings, 10 (3). ISSN 20796412

Yahya, W.Z.N. and Hong, P.Z. and Zain, W.Z. and Mohamed, N.M. (2020) Tripropyl Chitosan iodide-based gel polymer electrolyte as quasi solid-state dye sensitized solar cells. Materials Science Forum, 997 MS. pp. 69-76. ISSN 02555476

Rao, T.V.V.L.N. and Rani, A.M.A. and Mohamed, N.M. and Ya, H.H. and Awang, M. and Hashim, F.M. (2019) Analysis of magnetohydrodynamic partial slip laser bump texture slider and journal bearing. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233 (12). pp. 1921-1938. ISSN 13506501

Shukrullah, S. and Naz, M.Y. and Mohamed, N.M. and Ibrahim, K.A. and AbdEl-Salam, N.M. and Ghaffar, A. (2019) CVD synthesis, functionalization and CO2 adsorption attributes of multiwalled carbon nanotubes. Processes, 7 (9). ISSN 22279717

Mustafa, N.I. and Ludin, N.A. and Mohamed, N.M. and Ibrahim, M.A. and Teridi, M.A.M. and Sepeai, S. and Zaharim, A. and Sopian, K. (2019) Environmental performance of window-integrated systems using dye-sensitised solar module technology in Malaysia. Solar Energy, 187. pp. 379-392. ISSN 0038092X

Lim, C.E. and Ooi, M.L. and Wong, R.C.S. and Neo, K.E. and Mumtaz, A. and Mazhar, M. and Mohamed, N.M. and Saheed, M.S.M. (2019) Facile synthesis of molybdenum multisulfide composite nanorod arrays from single-source precursor for photoelectrochemical hydrogen generation. Applied Nanoscience (Switzerland), 9 (6). pp. 1281-1292. ISSN 21905509

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Bashiri, R. and Shamsudin, A.E. and Zaine, S.N.A. (2019) Few-layer graphene supported polyaniline (PANI) film as a transparent counter electrode for dye-sensitized solar cells. Diamond and Related Materials, 94. pp. 242-251. ISSN 09259635

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Samsudin, A.E. and Shahid, M.U. (2019) Improving the light scattering efficiency of photoelectrode dye-sensitized solar cell through optimization of core-shell structure. Materials Today Communications, 19. pp. 220-229. ISSN 23524928

Bashiri, R. and Mohamed, N.M. and Ling, L.Y. and Suhaimi, N.A. and Shahid, M.U. and Sufian, S. and Kait, C.F. and Saheed, S.M. (2019) Influence of seeding layer on photoelectrochemical hydrogen production over TiO 2 nanorod decorated with reduced graphene oxide. Diamond and Related Materials, 94. pp. 194-202. ISSN 09259635

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2019) Optimization of hydrogen production over TiO2 supported copper and nickel oxides: effect of photoelectrochemical features. Journal of Applied Electrochemistry, 49 (1). pp. 27-38. ISSN 0021891X

Anthony, L.S. and Perumal, V. and Mohamed, N.M. and Saheed, M.S.M. and Gopinath, S.C.B. (2019) An Overview of Unique Metal Oxide Nanostructures for Biosensor Applications. Advanced Structured Materials, 118. pp. 51-69. ISSN 18698433

Shukrullah, S. and Naz, M.Y. and Mohamed, N.M. and Ibrahim, K.A. and Ghaffar, A. and AbdEl-Salam, N.M. (2019) Production of bundled CNTs by floating a compound catalyst in an atmospheric pressure horizontal CVD reactor. Results in Physics, 12. pp. 1163-1171. ISSN 22113797

Mohamed Saheed, M.S. and Mohamed, N.M. and Mahinder Singh, B.S. and Jose, R. (2019) Surface Plasmon Assisted Electron-Hole Migration for High Photocurrent Density Generation in a Perovskite Solar Cell. ACS Applied Energy Materials, 2 (12). pp. 8707-8714. ISSN 25740962

Shukrullah, S. and Naz, M.Y. and Mohamed, N.M. and Ibrahim, K.A. and Ghaffar, A. and AbdEl-Salam, N.M. (2019) Synthesis of MWCNT forests with alumina-supported Fe2O3 catalyst by using a floating catalyst chemical vapor deposition technique. Journal of Nanomaterials, 2019. ISSN 16874110

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Khatani, M. and Bashiri, R. and Zaine, S.N.A. and Shamsudin, A.E. (2018) Dual functional passivating layer of graphene/TiO2 for improved performance of dye-sensitized solar cells. Applied Nanoscience (Switzerland), 8 (5). pp. 1001-1013. ISSN 21905509

Zaine, S.N.A. and Mohamed, N.M. and Khatani, M. and Shahid, M.U. (2018) Effect of paste viscosity on direct-current resistance in improving the efficiency of dye-sensitized solar cell. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 73-78. ISSN 21801843

Samsudin, M.F.R. and Sufian, S. and Mohamed, N.M. and Bashiri, R. and Wolfe, F. and Ramli, R.M. (2018) Enhancement of hydrogen production over screen-printed TiO2/BiVO4 thin film in the photoelectrochemical cells. Materials Letters, 211. pp. 13-16. ISSN 0167577X

Perumal, V. and Saheed, M.S.M. and Mohamed, N.M. and Saheed, M.S.M. and Murthe, S.S. and Gopinath, S.C.B. and Chiu, J.-M. (2018) Gold nanorod embedded novel 3D graphene nanocomposite for selective bio-capture in rapid detection of Mycobacterium tuberculosis. Biosensors and Bioelectronics, 116. pp. 116-122. ISSN 09565663

Mumtaz, A. and Mohamed, N.M. and Irshad, M.I. and Yar, A. and Mohamed Saheed, M.S. (2018) Mutual effect of extrinsic defects and electronic carbon traps of M-TiO2 (M = V, Co, Ni) nanorod arrays on photoexcited charge extraction of CdS for superior photoelectrochemical activity of hydrogen production. International Journal of Hydrogen Energy, 43 (31). pp. 14388-14405. ISSN 03603199

Ong, C.C. and Sundera Murthe, S. and Mohamed, N.M. and Perumal, V. and Mohamed Saheed, M.S. (2018) Nanoscaled Surface Modification of Poly(dimethylsiloxane) Using Carbon Nanotubes for Enhanced Oil and Organic Solvent Absorption. ACS Omega, 3 (11). pp. 15907-15915. ISSN 24701343

Faez, K.M. and Hamdavi, S. and Rao, T.V.V.L.N. and Ya, H.H. and Mohamed, N.M. (2018) Performance analysis of grooved hydrodynamic journal bearing with multi- depth textured surface. International Journal of Vehicle Structures and Systems, 10 (2). pp. 142-145. ISSN 09753060

Bashiri, R. and Mohamed, N.M. and Suhaimi, N.A. and Shahid, M.U. and Kait, C.F. and Sufian, S. and Khatani, M. and Mumtaz, A. (2018) Photoelectrochemical water splitting with tailored TiO2/SrTiO3@g-C3N4 heterostructure nanorod in photoelectrochemical cell. Diamond and Related Materials, 85. pp. 5-12. ISSN 09259635

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Applications of Taguchi method for optimization of dye solar cell design. Sains Malaysiana, 46 (3). pp. 503-508. ISSN 01266039

Yahya, W.Z.N. and Meng, W.T. and Khatani, M. and Samsudin, A.E. and Mohamed, N.M. (2017) Bio-based chitosan/PVdF-HFP polymer-blend for quasi-solid state electrolyte dye-sensitized solar cells. E-Polymers, 17 (5). pp. 355-361. ISSN 16187229

Emamian, S. and Hussain, P. and Awang, M. and Arumugam, T. and Yusof, F. and Saheed, M.S.M. and Mohamed, N.M. (2017) Comparison of carbon-based nanomaterials characteristics on H13 tool steel: Vergleich der Eigenschaften Kohlenstoff-basierter Nanomaterialien auf H13 Werkzeugstahl. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 198-204. ISSN 09335137

Shukrullah, S. and Mohamed, N.M. and Khan, Y. and Naz, M.Y. and Ghaffar, A. and Ahmad, I. (2017) Effect of Gas Flowrate on Nucleation Mechanism of MWCNTs for a Compound Catalyst. Journal of Nanomaterials, 2017. ISSN 16874110

Bashiri, R. and Mohamed, N.M. and Fai Kait, C. and Sufian, S. and Khatani, M. (2017) Enhanced hydrogen production over incorporated Cu and Ni into titania photocatalyst in glycerol-based photoelectrochemical cell: Effect of total metal loading and calcination temperature. International Journal of Hydrogen Energy, 42 (15). pp. 9553-9566. ISSN 03603199

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Khatani, M. (2017) Enhancing photoelectrochemical hydrogen production over Cu and Ni doped titania thin film: Effect of calcination duration. Journal of Environmental Chemical Engineering, 5 (4). pp. 3207-3214. ISSN 22133437

Assadi, M.K. and Hanaei, H. and Mohamed, N.M. and Saidur, R. and Bakhoda, S. and Bashiri, R. and Moayedfar, M. (2017) Erratum to: Enhancing the efficiency of luminescent solar concentrators (LSCs) (Applied Physics A, (2016), 122, 9, (821), 10.1007/s00339-016-0359-2). Applied Physics A: Materials Science and Processing, 123 (4). ISSN 09478396

Kang, C.H. and Obama, M.P.E.M. and Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Facile formation of interconnected multi-walled carbon nanotube-graphene nanocomposite for nanoelectronics applications. Key Engineering Materials, 744 74. pp. 433-437. ISSN 10139826

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Mohamed, N.M. (2017) Performance analysis of long grooved journal bearing with slip, no-slip, and slip/no-slip textured surface configurations. ARPN Journal of Engineering and Applied Sciences, 12 (20). pp. 5794-5798. ISSN 18196608

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. (2017) Precursor and pressure dependent 3D graphene: A study on layer formation and type of carbon material. Diamond and Related Materials, 79. pp. 93-101. ISSN 09259635

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2017) Study of surface defects and crystallinity of MWCNTs growth in FCCVD. Science and Engineering of Composite Materials, 24 (6). pp. 845-851. ISSN 0334181X

Samsudin, M.F.R. and Sufian, S. and Bashiri, R. and Mohamed, N.M. and Ramli, R.M. (2017) Synergistic effects of pH and calcination temperature on enhancing photodegradation performance of m-BiVO4. Journal of the Taiwan Institute of Chemical Engineers, 81. pp. 305-315. ISSN 18761070

Rao, T.V.V.L.N. and Rani, A.M.A. and Sufian, S. and Mohamed, N.M. (2017) Thin Film Hydrodynamic Bearing Analysis Using Nanoparticle Additive Lubricants. Topics in Mining, Metallurgy and Materials Engineering. pp. 149-173. ISSN 23643293

Kang, C.H. and Shen, C. and Saheed, M.S.M. and Mohamed, N.M. and Ng, T.K. and Ooi, B.S. and Burhanudin, Z.A. (2016) Carbon nanotube-graphene composite film as transparent conductive electrode for GaN-based light-emitting diodes. Applied Physics Letters, 109 (8). ISSN 00036951

Mumtaz, A. and Mohamed, N.M. and Mazhar, M. and Ehsan, M.A. and Mohamed Saheed, M.S. (2016) Core-Shell Vanadium Modified Titania@β-In2S3 Hybrid Nanorod Arrays for Superior Interface Stability and Photochemical Activity. ACS Applied Materials and Interfaces, 8 (14). pp. 9037-9049. ISSN 19448244

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Saheed, M.S.M. and Irshad, M.I. (2016) Effect of CVD Process Temperature on Activation Energy and Structural Growth of MWCNTs. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 (3). pp. 1413-1424. ISSN 10735623

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2016) Effect of Ethylene Flow Rate and CVD Process Time on Diameter Distribution of MWCNTs. Materials and Manufacturing Processes, 31 (12). pp. 1537-1542. ISSN 10426914

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Yasar, M. (2016) Effect of ferrocene catalyst and hydrogen feed on microstructures of vertically aligned MWCNTs. Key Engineering Materials, 701. pp. 8-12. ISSN 10139826

Muhsan, A.S. and Mohamed, N.M. and Ahmad, F. and Albarody, T.M.B. and Shahid, M.U. (2016) Effects of sintering parameters on the microstructural characteristics of cu/cnts nanocomposites. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14294-14298. ISSN 18196608

Assadi, M.K. and Hanaei, H. and Mohamed, N.M. and Saidur, R. and Bakhoda, S. and Bashiri, R. and Moayedfar, M. (2016) Enhancing the efficiency of luminescent solar concentrators (LSCs). Applied Physics A: Materials Science and Processing, 122 (9). ISSN 09478396

Hanaei, H. and Assadi, M.K. and Mohamed, N.M. and Appasamy, J.S. (2016) Fabrication of SWCNT/TiO2 for creating self-cleaning property on the glass. International Journal of Renewable Energy Research, 6 (4). pp. 1612-1618. ISSN 13090127

Irshad, M.I. and Mohamed, N.M. and Abdullah, M.Z. and Saheed, M.S.M. and Mumtaz, A. and Yasar, M. and Yar, A. and Zeeshan, M.A. and Sort, J. (2016) Influence of the electrodeposition potential on the crystallographic structure and effective magnetic easy axis of cobalt nanowires. RSC Advances, 6 (17). pp. 14266-14272. ISSN 20462069

Mohamed, N.M. and Irshad, M.I. and Abdullah, M.Z. and Saheed, M.S.M. (2016) Novel growth of carbon nanotubes on nickel nanowires. Diamond and Related Materials, 65. pp. 59-64. ISSN 09259635

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Kakooei, S. and Khatani, M. and Gholami, Z. (2016) Optimization hydrogen production over visible light-driven titania-supported bimetallic photocatalyst from water photosplitting in tandem photoelectrochemical cell. Renewable Energy, 99. pp. 960-970. ISSN 09601481

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2016) Parametric study on vapor-solid-solid growth mechanism of multiwalled carbon nanotubes. Materials Chemistry and Physics, 176. pp. 32-43. ISSN 02540584

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2016) Simulation on the Performance of Dye Solar Cell Incorporated with TiO2 Passivation Layer. International Journal of Photoenergy, 2016. ISSN 1110662X

Hanaei, H. and Assadi, M.K. and Mohamed, N.M. and Bashiri, R. (2016) A theoretical investigation into the performance of swcnts as an antireflection coating layer for silicon solar cell. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12094-12098. ISSN 18196608

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2015) Hydrogen production from water photosplitting using Cu/TiO2 nanoparticles: Effect of hydrolysis rate and reaction medium. International Journal of Hydrogen Energy, 40 (18). pp. 6021-6037. ISSN 03603199

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. (2015) Optimum temperature on structural growth of multiwalled carbon nanotubes with low activation energy. Diamond and Related Materials, 58. pp. 129-138. ISSN 09259635

Mohamed, N.M. and Khatani, M. and Hamid, N.H. and Sahmer, A.Z. and Zaine, S.N.A. (2015) Performance analysis of dye solar cell with additional TiO2 layer under different light Intensities. Materials Science in Semiconductor Processing, 38. pp. 381-386. ISSN 13698001

Mohamed, N.M. and Bashiri, R. and Chong, F.K. and Sufian, S. and Kakooei, S. (2015) Photoelectrochemical behavior of bimetallic Cu-Ni and monometallic Cu, Ni doped TiO2 for hydrogen production. International Journal of Hydrogen Energy, 40 (40). pp. 14031-14038. ISSN 03603199

Saheed, M.S.M. and Mohamed, N.M. (2015) Stack growth of aligned multiwalled carbon nanotubes using floating catalyst chemical vapor deposition technique. Chemical Physics Letters, 625. pp. 53-57. ISSN 00092614

Shukrullah, S. and Mohamed, N.M. and Naz, M.Y. and Shaharun, M.S. (2015) Synthesis and Characterization of Multiwalled Carbon Nanotubes Using Ferrocene and Aluminum Oxide/Iron Nitrate Catalysts. Analytical Letters, 48 (2). pp. 340-348. ISSN 00032719

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2015) Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites. International Journal of Powder Metallurgy, 51 (1). pp. 57-66. ISSN 08887462

Rao, T.V.V.L.N. and Sufian, S. and Mohamed, N.M. (2014) Analysis of electric double layer on thin film lubrication with partial slip. Advanced Materials Research, 925. pp. 538-542. ISSN 10226680

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2014) Application of experimental statistical method in optimizing preparation variables for Cu-Ni/TiO2 photocatalyst. Applied Mechanics and Materials, 625. pp. 856-859. ISSN 16609336

Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2014) Breakdown voltage reduction by field emission in multi-walled carbon nanotubes based ionization gas sensor. Applied Physics Letters, 104 (12). ISSN 00036951

Rahmam, S. and Mohamed, N.M. and Sufian, S. (2014) Characterization of modified multiwalled carbon nanotubes. Advanced Materials Research, 925. pp. 369-373. ISSN 10226680

Rahmam, S. and Mohamed, N.M. and Sufian, S. (2014) Effect of acid treatment on the multiwalled carbon nanotubes. Materials Research Innovations, 18. S6-196-S6-199. ISSN 14328917

Mohamed Saheed, M.S. and Mohamed, N.M. and Burhanudin, Z.A. (2014) Effect of different catalyst deposition technique on aligned multiwalled carbon nanotubes grown by thermal chemical vapor deposition. Journal of Nanomaterials, 2014. ISSN 16874110

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2014) Effect of ferrocene concentration on the quality of multiwalled CNTs grown by floating catalytic chemical vapor deposition technique. Main Group Chemistry, 13 (3). pp. 251-259. ISSN 10241221

Zaine, S.N.A. and Mohamed, N.M. and Samsudin, A.E. and Sahmer, A.Z. (2014) Effect of metal doped-TiO2 on the performance of dye solar cells (DSCs). Advanced Materials Research, 925. pp. 548-552. ISSN 10226680

Sahmer, A.Z. and Mohamed, N.M. (2014) Effect of reflective platinum film on the performance of flexible dye solar cell (DSC). Advanced Materials Research, 925. pp. 570-574. ISSN 10226680

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Megat Yusoff, P.S.M. and Raza, M.R. (2014) Homogeneous distribution of carbon nanotubes in copper matrix nanocomposites fabricated via combined technique. Nanoscience and Nanotechnology Letters, 6 (10). pp. 865-874. ISSN 19414900

Bashardoust, S. and Mohamed, N.M. and Ong, B.H. and Zaine, S.N.A. (2014) Modified polyol-mediated synthesis of doped TiO2 nanoparticles as the photoanode in dye solar cells (DSCs). Advanced Materials Research, 925. pp. 575-579. ISSN 10226680

Zaine, S.N.A. and Mohamed, N.M. and Bustam, M.A. (2014) Optimized TiO2 nanocrystallites aggregates for enhanced efficiency in dye solar cells. Advanced Materials Research, 917. pp. 35-44. ISSN 10226680

Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2014) Optimum design of ionization-based gas sensor using vertically aligned multiwalled carbon nanotubes array. Sensors and Actuators, B: Chemical, 199. pp. 232-238. ISSN 09254005

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. and Abdullah, M.Z. (2014) Preparation and structural characterization of template assisted electrodeposited copper nanowires. International Journal of Electrochemical Science, 9 (5). pp. 2548-2555. ISSN 14523981

Bashiri, R. and Mohamed, N.M. and Chong, F.K. and Sufian, S. (2014) Study on synthesis and characterization of Cu -Ni doped TiO2 by solgel hydrothermal. Advanced Materials Research, 925. pp. 396-400. ISSN 10226680

Bashiri, R. and Mohamed, N.M. and Chong, F.K. and Sufian, S. (2014) Study on synthesis and characterization of Cu -Ni doped TiO2 by solgel hydrothermal. Advanced Materials Research, 925. pp. 248-252. ISSN 10226680

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2013) Fabrication and microstructural analysis of CNTs reinforced copper matrix nanocomposites via MIM technique. Applied Mechanics and Materials, 459. pp. 11-17. ISSN 16609336

Mohamed Saheed, M.S. and Mohamed, N.M. and Burhanudin, Z.A. (2013) Optimization of the production of aligned CNTs array as the gas sensing element. Materials Science Forum, 756. pp. 156-163. ISSN 02555476

Mohamed, N.M. and Zaine, S.N.A. (2013) Performance of TiO2 aggregates-based dye solar cells. Materials Science Forum, 737. pp. 137-144. ISSN 02555476

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Yusoff, P.S.M.B.T.M. and Raza, M.R. (2012) Carbon nanotubes reinforced copper matrix nanocomposites via metal injection molding technique. Journal of Applied Sciences, 12 (23). pp. 2397-2403. ISSN 18125654

Mastan, A.A.K. and Mohamed, N.M. and Ahmedullah, S.S. (2012) The effects of temperature of hydrothermal growth of titanium dioxide nanomaterial. Advanced Materials Research, 545. pp. 93-99. ISSN 10226680

Kermany, A.R. and Mohamed, N.M. and Singh, B. (2011) Characterization of aligned MWCNTs array as the sensing element for ionization gas sensor. Journal of Applied Sciences, 11 (7). pp. 1243-1248. ISSN 18125654

Sunderan, P. and Ismail, A.M. and Singh, B. and Mohamed, N.M. (2011) Optimum tilt angle and orientation of stand-alone photovoltaic electricity generation systems for rural electrification. Journal of Applied Sciences, 11 (7). pp. 1219-1224. ISSN 18125654

Mohamed, N.M. and Kou, L.M. (2011) Piezoresistive effect of aligned multiwalled carbon nanotubes array. Journal of Applied Sciences, 11 (7). pp. 1386-1390. ISSN 18125654

Zambri, M.S.M. and Mohamed, N.M. and Kait, C.F. (2011) Preparation of electrochromic material using carbon nanotubes (CNTs). Journal of Applied Sciences, 11 (7). pp. 1321-1325. ISSN 18125654

Mohamed, N.M. and Kou, L.M. (2011) Sandwich growth of aligned carbon nanotubes array using thermal chemical vapor deposition method. Journal of Applied Sciences, 11 (7). pp. 1341-1345. ISSN 18125654

Zaine, S.N.A. and Mastan, A.A.K. and Ahmedullah, S.S. and Mohamed, N.M. and Ahmad, I.A. and Ramli, A. (2011) Synthesis and characterization of pure anatase TiO2 aggregates. Journal of Applied Sciences, 11 (7). pp. 1326-1330. ISSN 18125654

Mastan, A.A.K. and Ahmedullah, S.S. and Mohamed, N.M. (2011) The effects of hydrothermal growth parameters on titanium dioxide nanomaterial. Journal of Applied Sciences, 11 (7). pp. 1267-1272. ISSN 18125654

Lai, M.K. and Mohamed, N.M. and Begam, K.M. (2008) The role of Al2O3 buffer layer in the growth of aligned CNTs. Advanced Materials Research, 32. pp. 29-32. ISSN 10226680

Mohamed, N.M. and Chech, T.Y. and Masrom, A.K. (2006) Narrow diameter Carbon Nanotubes (CNTs) for polymer composite reinforcement. Materials Science Forum, 517. pp. 129-134. ISSN 02555476

Conference or Workshop Item

Permanasari, A.A. and Ramadani, R. and Sukarni, S. and Puspitasari, P. and Mohamed, N.M. and Pratama, M.M.A. (2023) Fuel Properties and Chemical Characterizations of Waste Cooking Oil Biodiesel-Diesel (B20) with Lemongrass Essential Oil Bioadditive. In: UNSPECIFIED.

Permanasari, A.A. and Faridi, A.F. and Sukarni, S. and Puspitasari, P. and Mohamed, N.M. and Pratama, M.M.A. (2023) Heat Transfer Characteristics on Shell and Tube Heat Exchanger Using TiO2/Water-Ethylene Glycol Nanofluid. In: UNSPECIFIED.

Soaid, N.I. and Hizam, S.M.M. and Saheed, M.S.M. and Mohamed, N.M. and Kait, C.F. (2023) A Simple Chemical Processing Route in Order to Obtain High Purity Graphene. In: UNSPECIFIED.

Hizam, S.M.M. and Soaid, N.I. and Saheed, M.S.M. and Mohamed, N.M. and Kait, C.F. (2023) Synthesis and Characterization of Tungsten-metal-organic Framework/Pyrrole-reduced Graphene Oxide. In: UNSPECIFIED.

Ullah, F. and Mohamed, N.M. and Mohamed Saheed, M.S. and Kait, C.F. (2022) Density Functional Theory Calculations for the Electronic Structure of Carbon and Copper Co-Doped TiO2 Rutile Model. In: UNSPECIFIED.

Hilmy, N.I.M.F. and Yahya, W.Z.N. and Zaine, S.N.A. and Mohamed, N.M. (2022) Photovoltaic performance of eutectic ionic liquids as potential electrolytes in dye-sensitized solar cells. In: UNSPECIFIED.

Abbasi, S. and Mohamed, N.M. and Singh, B.S.M. and Mumtaz, A. and Saheed, M.S.M. (2021) Effect of Nickel Doping on the Optical and Morphological Properties of Titanium Dioxide Nanotubes. In: UNSPECIFIED.

Ramly, K. and Mohamed, N.M. and Kait, C.F. (2021) Effect on Addition of Low Loading of Graphene Oxide to the Physical Characterization of Electrospun Polystyrene Fiber Mat. In: UNSPECIFIED.

Permanasari, A.A. and Mauludi, M.N. and Sukarni, S. and Puspitasari, P. and Mohamed, N.M. (2021) Exhaust gas emission and performance in diesel engine using diesel-biodiesel blends with orange essential oil bioadditive. In: UNSPECIFIED.

Mohamed, N.M. and Shahid, M.U. and Ramly, K. and Singh, B.S.M. and Kait, C.F. and Zaine, S.N.A. and Ullah, F. (2021) Flexible Photoelectrode Based on Binder-Free Paste for Dye-Sensitized Solar Cell. In: UNSPECIFIED.

Mohamed, N.M. and Ullah, F. and Bashiri, R. and Kait, C.F. and Saheed, M.S.M. and Shahid, M.U. (2021) Hubbard�s Modified Density Functional Theory Calculations for the Electronic Structure and Optical Properties of Carbon Doped Anatase TiO2. In: UNSPECIFIED.

Abbasi, S. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. (2021) Ni-Doped TiO2 Nanotubes for Low Concentration H2 Sensing. In: UNSPECIFIED.

Yuharmon, N.A.S. and Mohamed, N.M. and Kait, C.F. and Cheong, K.Y. (2021) Performance of Organic Polymer Electrolyte Based on Extracted Aloe Vera Polysaccharide Compared with Mannose, Agarose and Carboxymethyl-Cellulose (CMC) for DSCs Application. In: UNSPECIFIED.

Soaid, N.I. and Mohamed Saheed, M.S. and Mohamed Saheed, M.S. and Mohamed, N.M. (2019) Effect of laser power on the formation of porous graphitic carbon on polyimide film. In: UNSPECIFIED.

Vasudevan, M. and Murthe, S.S. and Yong, M.T.J. and Perumal, V. and Mohamed, N.M. and Gopinath, S.C.B. (2019) Facile Synthesis of Cellulose Acetate Nanofiber for Biosensing Application. In: UNSPECIFIED.

Alim, N.N.N.A. and Saheed, M.S.M. and Mohamed, N.M. and Saheed, M.S.M. (2019) Highly flexible and stretchable 3D graphene/MXene composite thin film. In: UNSPECIFIED.

Ong, C.C. and Mohamed Saheed, M.S. and Mohamed, N.M. and Mohamed Saheed, M.S. (2019) Highly hydrophobic 3D graphene-carbon nanotubes composite film for oil absorption. In: UNSPECIFIED.

Mohideen, A.A.M. and Saheed, M.S.M. and Mohamed, N.M. (2019) Multiwalled carbon nanotubes and graphene oxide as nano-additives in water-based drilling fluid for enhanced fluid-loss-control & gel strength. In: UNSPECIFIED.

Perumal, V. and Mohamed, N.M. and Saheed, M.S.M. and Saheed, M.S.M. (2019) Novel hydrothermal growth of ZnO/NiO hybrids nanostructures on 3D graphene. In: UNSPECIFIED.

Tai, M.J.Y. and Vasudevan, M. and Perumal, V. and Liu, W.W. and Mohamed, N.M. (2019) Synthesis of Laser Scribed Graphene Electrode with Optimized Power for Biosensing. In: UNSPECIFIED.

Murthe, S.S. and Mohamed Saheed, M.S. and Perumal, V. and Mohamed, N.M. and Mohamed Saheed, M.S. (2018) Effects of solvent ratio on the encapsulation of carbon nanotubes/Arthrospira platensis composite within electrospun poly(methyl methacrylate) nanofiber. In: UNSPECIFIED.

Mohamed, N.M. and Bashiri, R. and Kait, C.F. and Sufian, S. (2018) Photocatalytic water splitting over titania supported copper and nickel oxide in photoelectrochemical cell; Optimization of photoconversion efficiency. In: UNSPECIFIED.

Mohamed, N.M. and Shahid, M.U. and Mahinder Singh, B.S. and Joseph, E. and Mohamed Saheed, M.S. and Yar, A. and Bashiri, R. (2018) Polyaniline (PANI)/reduced graphene oxide (rGO) composite as a counter electrode for dye solar cells. In: UNSPECIFIED.

Mohamed, N.M. and Bashiri, R. and Shahid, M.U. and Kait, C.F. and Sufian, S. (2018) Potential Application of Metal-organic frameworks for Photocatalytic Water Splitting. In: UNSPECIFIED.

Yuharmon, N.A.S. and Mohamed, N.M. and Chong, F.K. and Cheong, K.Y. (2018) Scanning electron microscopy of soxhlet extracted aloe vera gel for electrolyte application. In: UNSPECIFIED.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. and Vitra Paputungan, I. (2018) Simulation Study of Dye Solar Cell with TiO 2 Nanoparticles/Aggregates Composite for Improved Performance. In: UNSPECIFIED.

Ismail, M. and Ludin, N.A. and Hamid, N.H. and Ibrahim, M.A. and Zulfakar, M.S. and Mohamed, N.M. and Sopian, K. (2017) Characterizations of natural dye from garcinia mangostana with graphene oxide (GO) as sensitizer in dye-sensitizer solar cells. In: UNSPECIFIED.

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Perumal, V. and Saheed, M.S.M. (2017) DC magnetron sputtered TiO2 thin film as efficient hole blocking layer for perovskite solar cell. In: UNSPECIFIED.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2017) Dye solar cell design parameter optimization using Silvaco ATHENA and ATLAS. In: UNSPECIFIED.

Shahid, M.U. and Mohamed, N.M. and Khatani, M. and Muhsan, A.S. and Samsudin, A. and Irshad, M.I. and Zaine, S.N.A. (2017) Graphene modified FTO/TiO2 interface photoelectrode for improved performance of dye sensitized solar cells. In: UNSPECIFIED.

Kang, C.H. and Burhanudin, Z.A. and Saheed, M.S.M. and Mohamed, N.M. (2017) Synthesis parameters and transfer techniques of mono-few layer graphene for transparent conductive electrode. In: UNSPECIFIED.

Perumal, V. and Mohamed, N.M. and Saheed, M.S.M. and Saheed, M.S.M. (2017) Template-assisted growth of highly oriented 3D graphene pH sensor towards new avenues for biosensor. In: UNSPECIFIED.

Yar, A. and Dennis, J.O. and Mohamed, N.M. and Mian, M.U. and Irshad, M.I. and Mumtaz, A. (2016) Copper oxide nanowires as better performance electrode material for supercapacitor application. In: UNSPECIFIED.

Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2016) Effect of electrode gap on the sensing properties of multiwalled carbon nanotubes based gas sensor. In: UNSPECIFIED.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Khatani, M. and Hanaei, H. (2016) Effect of preparation parameters on optical properties of Cu and Ni doped TiO2 photocatalyst. In: UNSPECIFIED.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Ullah, S. and Naz, M.Y. (2016) Effective CO2 adsorption on pristine and chemically functionalized MWCNTs. In: UNSPECIFIED.

Mumtaz, A. and Mohamed, N.M. and Saheed, M.S.M. and Yar, A. and Irshad, M.I. (2016) Enhanced photoelectrochemical activity by nanostructured V2O5/TiO2 bilayer. In: UNSPECIFIED.

Mohamed, N.M. and Zaine, S.N.A. and Ramli, R.M. (2016) Evaluation of CO2 emission from dye solar cell panel production process. In: UNSPECIFIED.

Kumar, P. and Kang, C.H. and Burhanudin, Z.A. and Saheed, M.S.M. and Irshad, M.I. and Mohamed, N.M. (2016) Graphene-based hybrid thin films as transparent conductive electrode for optoelectronic devices. In: UNSPECIFIED.

Saheed, M.S.M. and Mohamed, N.M. and Singh, B.S.M. and Saheed, M.S.M. (2016) Highly oriented graphene growth and characterization. In: UNSPECIFIED.

Joseph, E. and Singh, B.S.M. and Mohamed, N.M. and Kait, C.F. and Saheed, M.S.M. and Khatani, M. (2016) Investigating the performance of nitrogen-doped graphene photoanode in dye-sensitized solar cells. In: UNSPECIFIED.

Mohamed, N.M. and Bashiri, R. and Kait, C.F. and Sufian, S. and Khatani, M. (2016) Investigation of photoconversion efficiency of Cu and Ni doped TiO2 thin film in photoelectrochemical cell. In: UNSPECIFIED.

Zaine, S.N.A. and Mohamed, N.M. (2016) MATLAB simulation of Mie scattering by hollow sphere TiO2 for dye solar cell application. In: UNSPECIFIED.

Yasar, M. and Mohamed, N.M. and Hamid, N.H. and Shuaib, M. (2016) Pressure sensor based on pristine multi-walled carbon nanotubes forest. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Rani, A.M.A. and Sufian, S. and Mohamed, N.M. (2015) Analysis of CNT additives in porous layered thin film lubrication with electric double layer. In: UNSPECIFIED.

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. (2015) Effect of heat treatment on the physical properties of bimetallic doped catalyst, Cu-Ni/TiO 2. In: UNSPECIFIED.

Khatani, M. and Mohamed, N.M. and Hamid, N.H. and Muhsan, A.S. and Sahmer, A.Z. (2015) Effect of photoanode thickness on electrochemical performance of dye sensitized solar cell. In: UNSPECIFIED.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. (2015) Effect of process temperature on morphology of CNTs grown in a vertically fluidized bed reactor with Fe 2 O 3 /Al 2 O 3 catalyst. In: UNSPECIFIED.

Sahmer, A.Z. and Mohamed, N.M. and Zaine, S.N.A. (2015) Effectiveness of dye sensitised solar cell under low light condition using wide band dye. In: UNSPECIFIED.

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. and Abdullah, M.Z. and Yar, A. (2015) Microscopic and magnetic properties of template assisted electrodeposited iron nanowires. In: UNSPECIFIED.

Eskandar, A. and Mohamed, N.M. (2015) Microscopy of hierarchically organized TiO 2 photoelectrode for dye solar cells. In: UNSPECIFIED.

Mumtaz, A. and Mohamed, N.M. (2015) Nanoporous TiO 2 developed from two templates for their use in photovoltaic applications. In: UNSPECIFIED.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Yusoff, P.S.M.M. and Raza, M.R. and Afrooz, I.E. (2014) Experimental preparation and numerical simulation of high thermal conductive Cu/CNTs Nanocomposites. In: UNSPECIFIED.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2014) Simulation of the effects of electrolyte concentration on Dye Solar Cell performance. In: UNSPECIFIED.

Rao, T.V.V.L.N. and Sufian, S. and Mohamed, N.M. (2013) Analysis of nanoparticle additive couple stress fluids in three-layered journal bearing. In: UNSPECIFIED.

Oktiawati, U.Y. and Mohamed, N.M. and Burhanudin, Z.A. (2013) Effects of TiO2 electrode thickness on the performance of dye solar cell by simulation. In: UNSPECIFIED.

Zaine, S.N.A. and Mohamed, N.M. and Bustam, M.A. (2012) Effect of water content in the formation of TiO2 aggregates on the performance of dye solar cells (DSCs). In: UNSPECIFIED.

Mohd Zambri, M.S. and Mohamed, N.M. and Kait, C.F. (2012) Electrochromic behaviour of PANI/carbon nanotube electrochromic cell. In: UNSPECIFIED.

Sahmer, A.Z. and Mohamed, N.M. (2012) Fabrication of dye solar cell on flexible substrate using ITO-PEN film. In: UNSPECIFIED.

Mahinder Singh, B.S. and Husain, N. and Mohamed, N.M. (2012) Integrated photovoltaic (PV) monitoring system. In: UNSPECIFIED.

Samsudin, A.E. and Mohamed, N.M. (2012) Performance analysis of dye solar cells with various nanoparticles- aggregates mesoscopic multilayer configurations. In: UNSPECIFIED.

Saheed, M.S.M. and Mohamed, N.M. and Burhanudin, Z.A. (2012) Preparation of the spacer for narrow electrode gap configuration in ionization-based gas sensor. In: UNSPECIFIED.

Zambri, M.S.M. and Mohamed, N.M. and Kait, C.F. (2012) Study on the performance of carbon nanotube-based electrochromic cell. In: UNSPECIFIED.

Bin Samsudin, A.E. and Mohamed, N.M. and Nayan, N. and Ali, R.A.M. and Shariffuddin, S.A.A. and Omar, S. (2012) Study on the use of TiO2 passivation layer to reduce recombination losses in dye sensitized solar cells. In: UNSPECIFIED.

Soriadi, N. and Mohamed, N.M. and Hussin, F.A. (2012) A review of TiO2 nanotube arrays for hydrogen sensing application. In: UNSPECIFIED.

Ahmad, P. and Mohamed, N.M. and Burhanudin, Z.A. (2012) A review of nanostructured based radiation sensors for neutron. In: UNSPECIFIED.

Irshad, M.I. and Ahmad, F. and Mohamed, N.M. (2012) A review on nanowires as an alternative high density magnetic storage media. In: UNSPECIFIED.

Soriadi, N. and Mohamed, N.M. and Hussin, F.A. (2011) Development of TiO 2 nanotubes for hydrogen sensing application. In: UNSPECIFIED.

Husain, N.S. and Zainal, N.A. and Mahinder Singh, B.S. and Mohamed, N.M. and Mohd Nor, N. (2011) Integrated PV based solar insolation measurement and performance monitoring system. In: UNSPECIFIED.

Kermany, A.R. and Mohamed, N.M. and Singh, B.S.M. (2011) Ionization gas sensor using aligned multiwalled carbon nanotubes array. In: UNSPECIFIED.

Sunderan, P. and Singh, B. and Mohamed, N.M. and Husain, N.S. (2011) Sizing and designing a stand-alone photovoltaic electricity generation system using a customized simulation program. In: UNSPECIFIED.

Sunderan, P. and Singh, B. and Mohamed, N.M. and Husain, N.S. (2011) Techno-economic analysis of an off-grid photovoltaic natural gas power system for a university. In: UNSPECIFIED.

Mohamed, N.M. and Lai, M.K. and Begam, K.M. (2010) Development of aligned carbon nanotubes (CNTs) for pressure sensing application. In: UNSPECIFIED.

Kermany, A.R. and Mohamed, N.M. and Singh, B.M. (2010) Ionization gas sensor using aligned multiwalled carbon nanotubes (MWCNTs) array. In: UNSPECIFIED.

Kermany, A.R. and Mohamed, N.M. and Mahinder Singh, B.S. (2010) Ionization-based gas sensor using aligned MWCNTs array. In: UNSPECIFIED.

Thaha, H. and Mohamed, N.M. (2010) Synthesis and characterization of single walled carbon nanotubes (SWNTs) for sensing application. In: UNSPECIFIED.

Kou, L.M. and Mohamed, N.M. and Seng, L.J. and Singh, B.S.M. (2010) The effect of catalyst composition on the characteristic of bulk single-walled carbon nanotubes (SWNTs). In: UNSPECIFIED.

Lai, M.K. and Mohamed, N.M. and Begam, K.M. (2009) Study on the Growth of carbon nanotubes with Different Fe precursor. In: UNSPECIFIED.

Mohamed, N.M. and Tan, Y.C. and Kadir, A.K. (2006) Synthesis of narrow diameter multiwalled carbon nanotubes (MWNTs) by catalytic chemical vapor deposition for mechanical reinforcement applications. In: UNSPECIFIED.

Book

Anthony, L.S. and Perumal, V. and Mohamed, N.M. and Balakrishnan, S.R. and Gopinath, S.C.B. (2020) Characterization of synthesized nanoparticles for medical devices: Current techniques and recent advances. Elsevier, pp. 223-245. ISBN 9780128211632

Murthe, S.S. and Mohamed Saheed, M.S. and Perumal, V. and Mohamed Saheed, M.S. and Mohamed, N.M. (2018) Electrospun nanofibers for biosensing applications. Elsevier, pp. 253-267. ISBN 9780128139004; 9780128139011

Perumal, V. and Mohamed, N.M. and Mohamed Saheed, M.S. and Mohamed Saheed, M.S. (2018) Microtechnology and nanotechnology advancements toward bio-molecular targeting. Elsevier, pp. 225-251. ISBN 9780128139004; 9780128139011

Chowdhury, S. and Yasir, M. and Uemura, Y. and Mohamed, N.M. and Uddin, A. and Yanagida, T. (2015) Application of micro-or small-scale biomass-derived fuel system for power generation. Springer International Publishing, pp. 339-367. ISBN 9783319075785; 9783319075778

Chowdhury, S. and Yasir, M. and Uemura, Y. and Mohamed, N.M. and Uddin, A. and Yanagida, T. (2014) Application of micro-or small-scale biomass-derived fuel system for power generation. Springer International Publishing, pp. 339-367. ISBN 9783319075785; 3319075772; 9783319075778