Article

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Sharif, T. and Sajid, Z. and Hussnain, S.M. and Choudhry, R.S. (2024) Bearing performance and damage characteristics of rein-infused thermoplastic 3D woven composites bolted joints. Polymer Composites, 45 (1). pp. 631-652.

Hussnain, S.M. and Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Hussain, M.Z. (2023) Degradation and mechanical performance of fibre-reinforced polymer composites under marine environments: A review of recent advancements. Polymer Degradation and Stability, 215.

Shah, S.Z.H. and Lee, J. and Megat-Yusoff, P.S.M. and Hussain, S.Z. and Sharif, T. and Choudhry, R.S. (2023) Multiscale damage modelling of notched and un-notched 3D woven composites with randomly distributed manufacturing defects. Composite Structures, 318.

Al-Jothery, H.K.M. and Albarody, T.M.B. and Sultan, N.M. and Mohammed, H.G. and Megat-Yusoff, P.S.M. and Almuramady, N. and AL-Nidawi, W.J.A. (2023) Sintering β-SiC nanopowder using novel microwave-current assisted sintering technique: preliminary study. Advances in Natural Sciences: Nanoscience and Nanotechnology, 14 (3).

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. (2022) Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites. Applied Composite Materials, 29 (2). pp. 515-545. ISSN 0929189X

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Sajid, Z. (2022) Off-Axis and On-Axis Performance of Novel Acrylic Thermoplastic (Elium®) 3D Fibre-Reinforced Composites under Flexure Load. Polymers, 14 (11). ISSN 20734360

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Sharif, T. and Hussain, S.Z. and Choudhry, R.S. (2022) Off-axis tensile performance of notched resin-infused thermoplastic 3D fibre-reinforced composites. Mechanics of Materials, 175. ISSN 01676636

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ud Din, I. and Othman, A.R. and Sharp, K. and Gerard, P. (2021) Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering, 207. ISSN 13598368

Al-Jothery, H.K.M. and Albarody, T.M.B. and Megat-Yusoff, P.S.M. and Al-Shaibani, N. and Mohammed, H.G. (2021) Experimental Investigations on Microwave-Current Assisted Sintering Process and Oxidation of Graphite Die at High Temperature. International Journal of Automotive and Mechanical Engineering, 18 (2). pp. 8781-8789. ISSN 22298649

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Choudhry, R.S. and Sajid, Z. and Din, I.U. (2021) Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites. Composites Communications, 28. ISSN 24522139

Arogundade, A.I. and Megat-Yusoff, P.S.M. and Ahmad, F. and Bhat, A.H. and Afolabi, L.O. (2021) Modification of bauxite residue with oxalic acid for improved performance in intumescent coatings. Journal of Materials Research and Technology, 12. pp. 679-687. ISSN 22387854

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Sajid, Z. (2021) Multiscale damage modelling of 3D woven composites under static and impact loads. Composites Part A: Applied Science and Manufacturing, 151. ISSN 1359835X

Shah, S.Z.H. and Megat-Yusoff, P.S.M. and Karuppanan, S. and Choudhry, R.S. and Ahmad, F. and Sajid, Z. and Gerard, P. and Sharp, K. (2021) Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading. International Journal of Mechanical Sciences, 189. ISSN 00207403

Afolabi, L.O. and Megat-Yusoff, P.S.M. and Ariff, Z.M. and Hamizol, M.S. (2019) Fabrication of pandanus tectorius (screw-pine) natural fiber using vacuum resin infusion for polymer composite application. Journal of Materials Research and Technology, 8 (3). pp. 3102-3113. ISSN 22387854

Shah, S.Z.H. and Karuppanan, S. and Megat-Yusoff, P.S.M. and Sajid, Z. (2019) Impact resistance and damage tolerance of fiber reinforced composites: A review. Composite Structures, 217. pp. 100-121. ISSN 02638223

Yasir, M. and Ahmad, F. and Megat-Yusoff, P.S.M. and Ullah, S. and Jimenez, M. (2019) Quantifying the effects of basalt fibers on thermal degradation and fire performance of epoxy-based intumescent coating for fire protection of steel substrate. Progress in Organic Coatings, 132. pp. 148-158. ISSN 03009440

Afolabi, L.O. and Ariff, Z.M. and Megat-Yusoff, P.S.M. and Al-Kayiem, H.H. and Arogundade, A.I. and Afolabi-Owolabi, O.T. (2019) Red-mud geopolymer composite encapsulated phase change material for thermal comfort in built-sector. Solar Energy, 181. pp. 464-474. ISSN 0038092X

Puspitasari, W.C. and Ahmad, F. and Ullah, S. and Hussain, P. and Megat-Yusoff, P.S.M. and Masset, P.J. (2019) The study of adhesion between steel substrate, primer, and char of intumescent fire retardant coating. Progress in Organic Coatings, 127. pp. 181-193. ISSN 03009440

Gillani, Q.F. and Ahmad, F. and Mutalib, M.I.A. and Megat-Yusoff, P.S.M. and Ullah, S. (2018) Effects of Halloysite Nanotube Reinforcement in Expandable Graphite Based Intumescent Fire Retardant Coatings Developed Using Hybrid Epoxy Binder System. Chinese Journal of Polymer Science (English Edition), 36 (11). pp. 1286-1296. ISSN 02567679

Altaf, K. and Qayyum, J.A. and Rani, A.M.A. and Ahmad, F. and Megat-Yusoff, P.S.M. and Baharom, M. and Aziz, A.R.A. and Jahanzaib, M. and German, R.M. (2018) Performance analysis of enhanced 3D printed polymer molds for metal injection molding process. Metals, 8 (6). ISSN 20754701

Gillani, Q.F. and Ahmad, F. and Abdul Mutalib, M.I. and Megat-Yusoff, P.S.M. and Ullah, S. and Messet, P.J. and Zia-ul-Mustafa, M. (2018) Thermal degradation and pyrolysis analysis of zinc borate reinforced intumescent fire retardant coatings. Progress in Organic Coatings, 123. pp. 82-98. ISSN 03009440

Hazwani Dzulkafli, H. and Ahmad, F. and Ullah, S. and Hussain, P. and Mamat, O. and Megat-Yusoff, P.S.M. (2017) Effects of talc on fire retarding, thermal degradation and water resistance of intumescent coating. Applied Clay Science, 146. pp. 350-361. ISSN 01691317

Owolabi, A.L. and Megat-Yusoff, P.S.M. and Said, M.A.M. (2017) Investigation on microstructure and mechanical properties on varying surface region of a serviceexposed IN738 turbine blade. International Journal of Microstructure and Materials Properties, 12 (1-2). pp. 38-54. ISSN 17418410

Mahmud, A. and Megat-Yusoff, P.S.M. and Ahmad, F. and Farezzuan, A.A. (2016) Acid leaching as efficient chemical treatment for rice husk in production of amorphous silica nanoparticles. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13384-13388. ISSN 18196608

Arogundade, A.I. and Megat-Yusoff, P.S.M. and Ahmad, F. and Bhat, A.H. and Gillani, Q.F. (2016) Effect of bauxite residue loading on heat shielding performance of an ammonium polyphosphate based epoxy intumescent system. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12165-12169. ISSN 18196608

Hamizol, M.S. and Megat-Yusoff, P.S.M. and Nasrudin, M.A. and Meor Said, M.A. and Jasmani, M.S. and Syed Ahmad Ghazali, S.M.A. (2016) Investigation on changes in gamma prime precipitate on varying surface locations of IN738 engine turbine blade. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2076-2083. ISSN 22894659

Hamizol, M.S. and Megat-Yusoff, P.S.M. (2015) Tensile strength of single continuous fiber extracted from mengkuang leaves. Jurnal Teknologi, 76 (3). pp. 101-107. ISSN 01279696

Zia-ul-Mustafa, M. and Ahmad, F. and Megat-Yusoff, P.S.M. and Aziz, H. (2014) The effect of wollastonite filler on thermal performance of intumescent fire retardant coating. Advanced Materials Research, 970. pp. 328-331. ISSN 10226680

Amir, N. and Ahmad, F. and Megat-Yusoff, P.S.M. (2013) Char strength of wool fibre reinforced epoxy-based intumescent coatings (FRIC). Advanced Materials Research, 626. pp. 504-508. ISSN 10226680

Mat-Shayuti, M.S. and Abdullah, M.Z. and Megat-Yusoff, P.S.M. (2013) Water absorption properties and morphology of polypropylene/polycarbonate/polypropylene-graft-maleic anhydride blends. Asian Journal of Scientific Research, 6 (2). pp. 167-176. ISSN 19921454

Amir, N. and Ahmad, F. and Megat-Yusoff, P.S.M. (2012) Mechanisms of char strengthening in the fibre reinforced intumescent coatings. Journal of Applied Sciences, 12 (23). pp. 2459-2463. ISSN 18125654

Ullah, S. and Ahmad, F. and Megat-Yusoff, P.S.M. (2011) Effect of boric acid with kaolin clay on thermal degradation of intumescent fire retardant coating. Journal of Applied Sciences, 11 (21). pp. 3645-3649. ISSN 18125654

Megat-Yusoff, P.S.M. and Latif, M.R.A. and Ramli, M.S. (2011) Optimizing injection molding processing parameters for enhanced mechanical performance of oil palm empty fruit bunch high density polyethylene composites. Journal of Applied Sciences, 11 (9). pp. 1618-1623. ISSN 18125654

Amir, N. and Ahmad, F. and Megat-Yusoff, P.S.M. (2011) Study on the fibre reinforced epoxy-based intumescent coating formulations and their char characteristics. Journal of Applied Sciences, 11 (10). pp. 1678-1687. ISSN 18125654

Kaur, J. and Ahmad, F. and Megat-Yusoff, P.S.M. (2011) The effect on adhesion bonding of expandable graphite based intumescent coating using zinc borate filler. Malaysian Journal of Microscopy, 7 (1). pp. 196-202. ISSN 18237010

Ullah, S. and Ahmad, F. and Megat-Yusoff, P.S.M. and Azm, N.H.B. (2011) A study of bonding mechanism of expandable graphite based intumescent coating on steel substrate. Journal of Applied Sciences, 11 (9). pp. 1630-1635. ISSN 18125654

Arif, M.F. and Megat-Yusoff, P.S.M. and Ahmad, F. (2010) Effects of chemical treatment on oil palm empty fruit bunch reinforced high density polyethylene composites. Journal of Reinforced Plastics and Composites, 29 (14). pp. 2105-2118. ISSN 07316844

Conference or Workshop Item

Mat-Shayuti, M.S. and Megat-Yusoff, P.S.M. and Sharudin, R.W. and Wan Bakar, W.Z. and Jarni, H.H. and Ahmad Fuad, F.I. (2020) Arrhenius model for styrene monomer migration from single-use polystyrene cup. In: UNSPECIFIED.

Mahmud, A. and Megat-Yusoff, P.S.M. and Ahmad, F. (2019) Synthesis and evaluation of poly octanediol citrate / nano silica composite. In: UNSPECIFIED.

Owolabi, A.L. and Megat-Yusoff, P.S.M. and Amir, N. and Jasmani, M.S. and Syed Ahmad Ghazali, S.M.A. (2018) Effect of Grain Boundary Formation in Microstructural Changes in IN 738 Service Exposed Turbine Blade. In: UNSPECIFIED.

Mahmud, A. and Megat-Yusoff, P.S.M. and Ahmad, F. (2018) Nano-silica effect on the poly (1, 8-octanediol citrate) composite properties for bone plate application. In: UNSPECIFIED.

Mat-Shayuti, M.S. and Abdullah, M.Z. and Megat-Yusoff, P.S.M. (2017) Tensile Behaviour and Morphology of Polypropylene/Polycar-bonate/Polypropylene-graft-maleic Anhydride Blends. In: UNSPECIFIED.

Mat-Shayuti, M.S. and Abdullah, M.Z. and Megat-Yusoff, P.S.M. (2016) THERMAL properties and morphology of Polypropylene/Polycarbonate/Polypropylene-Graft-Maleic anhydride blends. In: UNSPECIFIED.

Arogundade, A.I. and Megat-Yusoff, P.S.M. and Bhat, A.H. and Faiz, A. (2015) Characterization of red mud-epoxy intumescent char using surface imaging and micro analysis. In: UNSPECIFIED.

Zia-ul-Mustafa, M. and Ahmad, F. and Megat-Yusoff, P.S.M. and Aziz, H. (2015) Synergistic effects of mica and wollastonite fillers on thermal performance of intumescent fire retardant coating. In: UNSPECIFIED.

Zia-Ul-Mustafa, M. and Ahmad, F. and Megat-Yusoff, P.S.M. and Aziz, H. (2014) The effect of particle size of wollastonite filler on thermal performance of intumescent fire retardant coating. In: UNSPECIFIED.