Article

Alam, M.A. and Ya, H.B. and Azeem, M. and Mustapha, M. and Yusuf, M. and Masood, F. and Marode, R.V. and Sapuan, S.M. and Ansari, A.H. (2023) Advancements in aluminum matrix composites reinforced with carbides and graphene: A comprehensive review. Nanotechnology Reviews, 12 (1).

Alam, M.A. and Ya, H.H. and Qistina, N.A. and Azeem, M. and Mustapha, M. and Yusuf, M. and Masood, F. and Khan, R. and Ahmad, T. (2023) Investigating the Microhardness Behavior of Al6061/TiC Surface Composites Produced by Friction Stir Processing. International Journal of Computational Methods and Experimental Measurements, 11 (3). pp. 157-161.

Soni, A. and Das, P.K. and Yusuf, M. and Ridha, S. and Kamyab, H. and Alam, M.A. and Masood, F. and Chelliapan, S. and Ubaidullah, M. and Pandit, B. and Prakash, C. (2023) Synergy of silica sand and waste plastics as thermoplastic composites on abrasive wear characteristics under conditions of different loads and sliding speeds. Chemosphere, 323.

Alam, M.A. and Ya, H.H. and Azeem, M. and Yusuf, M. and Soomro, I.A. and Masood, F. and Shozib, I.A. and Sapuan, S.M. and Akhter, J. (2022) Artificial Neural Network Modeling to Predict the Effect of Milling Time and TiC Content on the Crystallite Size and Lattice Strain of Al7075-TiC Composites Fabricated by Powder Metallurgy. Crystals, 12 (3). ISSN 20734352

Ali, M. and Khan, M.I. and Masood, F. and Alsulami, B.T. and Bouallegue, B. and Nawaz, R. and Fediuk, R. (2022) Central composite design application in the optimization of the effect of waste foundry sand on concrete properties using RSM. Structures, 46. pp. 1581-1594. ISSN 23520124

Qureshi, F. and Yusuf, M. and Kamyab, H. and Zaidi, S. and Junaid Khalil, M. and Arham Khan, M. and Azad Alam, M. and Masood, F. and Bazli, L. and Chelliapan, S. and Abdullah, B. (2022) Current trends in hydrogen production, storage and applications in India: A review. Sustainable Energy Technologies and Assessments, 53. ISSN 22131388

Ali, S.M. and Sovuthy, C. and Noghanian, S. and Saeidi, T. and Majeed, M.F. and Hussain, A. and Masood, F. and Khan, S.M. and Shah, S.A. and Abbasi, Q.H. (2022) Design and Evaluation of a Button Sensor Antenna for On-Body Monitoring Activity in Healthcare Applications. Micromachines, 13 (3). ISSN 2072666X

Masood, F. and Nallagownden, P. and Elamvazuthi, I. and Akhter, J. and Alam, M.A. (2022) A Review of Artificial Intelligence-Based Techniques to Estimate Atmospheric Parameters Influencing the Performance of Concentrating Photovoltaic/Thermal Systems. Lecture Notes in Electrical Engineering, 758. pp. 365-372. ISSN 18761100

Masood, F. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. and Saidur, R. and Alam, M.A. and Akhter, J. and Yusuf, M. and Mehmood, M. and Ali, M. (2022) A Review of Recent Developments and Applications of Compound Parabolic Concentrator-Based Hybrid Solar Photovoltaic/Thermal Collectors. Sustainability (Switzerland), 14 (9). ISSN 20711050

Masood, F. and Nor, N.B.M. and Elamvazuthi, I. and Saidur, R. and Alam, M.A. and Akhter, J. and Yusuf, M. and Ali, S.M. and Sattar, M. and Baba, M. (2022) The compound parabolic concentrators for solar photovoltaic applications: Opportunities and challenges. Energy Reports, 8. pp. 13558-13584. ISSN 23524847

Baba, M. and Nor, N.B.M. and Sheikh, M.A. and Nowakowski, G. and Masood, F. and Rehman, M. and Irfan, M. and Arefin, A.A. and Kumar, R. and Baba, A.M. (2022) A review of the importance of synchrophasor technology, smart grid, and applications. Bulletin of the Polish Academy of Sciences: Technical Sciences, 70 (6). ISSN 02397528

Sattar, M. and Othman, A.R. and Akhtar, M. and Kamaruddin, S. and Khan, R. and Masood, F. and Alam, M.A. and Azeem, M. and Mohsin, S. (2021) Curve fitting for damage evolution through regression analysis for the kachanov�rabotnov model to the norton�bailey creep law of ss-316 material. Materials, 14 (19). ISSN 19961944

Masood, F. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. and Alam, M.A. and Yusuf, M. and Ali, M. and Akhter, J. and Mehmood, M. (2021) Dataset on the effect of receiver size and acceptance half-angle on the aperture width and height of compound parabolic concentrator for low-concentrating photovoltaic applications using RSM. Data in Brief, 39. ISSN 23523409

Masood, F. and Nallagownden, P. and Elamvazuthi, I. and Alam, M.A. and Ali, M. and Azeem, M. (2021) Design and Optical Performance Analysis of a Quasi-stationary Compound Parabolic Concentrator for Photovoltaic Applications. Lecture Notes in Mechanical Engineering. pp. 241-248. ISSN 21954356

de Azevedo, A.R.G. and Marvila, M.T. and Ali, M. and Khan, M.I. and Masood, F. and Vieira, C.M.F. (2021) Effect of the addition and processing of glass polishing waste on the durability of geopolymeric mortars. Case Studies in Construction Materials, 15. ISSN 22145095

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Mehmood, M. and Ali, M. and Ullah, B. and Alam, M.A. and Masood, F. (2021) Experimental Investigation of a Medium Temperature Single-Phase Thermosyphon in an Evacuated Tube Receiver Coupled With Compound Parabolic Concentrator. Frontiers in Energy Research, 9. ISSN 2296598X

Alam, M.A. and Ya, H.H. and Azeem, M. and Yusuf, M. and Sapuan, S.M. and Masood, F. (2021) Investigating the effect of mixing time on the crystallite size and lattice strain of the AA7075/TiC composites Einfluss der Mischzeit auf die Kristallitgrö�e und die Gitterverzerrung von AA7075/TiC-Verbundwerkstoffen. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1112-1120. ISSN 09335137

Azeem, M. and Ya, H.H. and Alam, M.A. and Sultan, T.H. and Ali, M. and Sattar, M. and Ahmad, T. and Hatami, H. and Sadique, M.R. and Mokhtar, A.A. and Mustapha, M. and Khan, M.A. and Masood, F. (2021) Macroscale assessment of low-velocity impact on hybrid composite laminates Makroskalige Bewertung des Einflusses niedriger Aufprallgeschwindigkeit auf hybride Verbundlaminate. Materialwissenschaft und Werkstofftechnik, 52 (10). pp. 1101-1111. ISSN 09335137

Alam, M.A. and Ya, H.H. and Yusuf, M. and Sivraj, R. and Mamat, O.B. and Sapuan, S.M. and Masood, F. and Parveez, B. and Sattar, M. (2021) Modeling, optimization and performance evaluation of tic/graphite reinforced al 7075 hybrid composites using response surface methodology. Materials, 14 (16). ISSN 19961944

Ali, M. and de Azevedo, A.R.G. and Marvila, M.T. and Khan, M.I. and Memon, A.M. and Masood, F. and Almahbashi, N.M.Y. and Shad, M.K. and Khan, M.A. and Fediuk, R. and Timokhin, R. and Borovkov, A. and Haq, I.U. (2021) The influence of covid-19-induced daily activities on health parameters�a case study in malaysia. Sustainability (Switzerland), 13 (13). ISSN 20711050

Masood, F. and Nallagownden, P. and Elamvazuthi, I. and Akhter, J. and Alam, M.A. (2021) A new approach for design optimization and parametric analysis of symmetric compound parabolic concentrator for photovoltaic applications. Sustainability (Switzerland), 13 (9). ISSN 20711050

Ali, M. and Room, S. and Khan, M.I. and Masood, F. and Ali Memon, R. and Khan, R. and Memon, A.M. (2020) Assessment of local earthen bricks in perspective of physical and mechanical properties using Geographical Information System in Peshawar, Pakistan. Structures, 28. pp. 2549-2561. ISSN 23520124

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Ali, M. and Masood, F. (2020) Experimental evaluation of thermophysical properties of oil-based titania nanofluids for medium temperature solar collectors Experimentelle Einschätzung der thermophysikalischen Eigenschaften von ölbasierten Titandioxid-Nanofluiden für Mitteltemperatur-Solarkollektoren. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 792-802. ISSN 09335137

Akhter, J. and Gilani, S.I. and Al-kayiem, H.H. and Ali, M. and Masood, F. (2019) Characterization and stability analysis of oil-based copper oxide nanofluids for medium temperature solar collectors Charakterisierung und Stabilitätsanalyse von ölbasierten Kupferoxid-Nanofluiden für Mitteltemperatursonnenkollektoren. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 311-319. ISSN 09335137

Conference or Workshop Item

Alam, M.A. and Ya, H.H. and Gerewal, L. and Azeem, M. and Masood, F. and Yusuf, M. and Ahmad, T. and Khan, M.R. and Shozib, I.A. (2024) Evaluation on the impact behavior of stir-casted Aluminum composites reinforced with SiC and Gr for lightweight applications. In: UNSPECIFIED.

Masood, F. and Nallagownden, P.A.-L. and Elamvazuthi, I. and Akhter, J. and Alam, M.A. and Yusuf, M. (2021) Design and Parametric Analysis of Compound Parabolic Concentrator for Photovoltaic Applications. In: UNSPECIFIED.

Ali, M. and Masood, F. and Khan, M.I. and Azeem, M. and Qasim, M. and Ali, F.N. (2021) Evaluation of flexible pavement distresses-A Case Study of Northern Bypass Peshawar, Pakistan. In: UNSPECIFIED.

Yusuf, M. and Bazli, L. and Alam, M.A. and Masood, F. and Keong, L.K. and Noor, A. and Hellgardt, K. and Abdullah, B. (2021) Hydrogen production via natural gas reforming: A comparative study between DRM, SRM and BRM techniques. In: UNSPECIFIED.

Alam, M.A. and Ya, H.H. and Ahmad, A. and Yusuf, M. and Azeem, M. and Masood, F. (2021) Influence of aluminum addition on the mechanical properties of brass/Al composites fabricated by stir casting. In: UNSPECIFIED.

Book

Alam, M.A. and Ya, H.H. and Sapuan, S.M. and Mamat, O. and Parveez, B. and Yusuf, M. and Masood, F. and Ilyas, R.A. (2022) Recent Advancements in Advanced Composites for Aerospace Applications: A Review. Springer International Publishing, pp. 319-339. ISBN 9783030881924; 9783030881917